diff options
Diffstat (limited to 'abs/core/wpa_supplicant/config')
-rw-r--r-- | abs/core/wpa_supplicant/config | 527 |
1 files changed, 34 insertions, 493 deletions
diff --git a/abs/core/wpa_supplicant/config b/abs/core/wpa_supplicant/config index c1035b4..bef7737 100644 --- a/abs/core/wpa_supplicant/config +++ b/abs/core/wpa_supplicant/config @@ -1,505 +1,46 @@ -# Example wpa_supplicant build time configuration -# -# This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. -# -# This file is included in Makefile, so variables like CFLAGS and LIBS can also -# be modified from here. In most cases, these lines should use += in order not -# to override previous values of the variables. - - -# Uncomment following two lines and fix the paths if you have installed OpenSSL -# or GnuTLS in non-default location -#CFLAGS += -I/usr/local/openssl/include -#LIBS += -L/usr/local/openssl/lib - -# Some Red Hat versions seem to include kerberos header files from OpenSSL, but -# the kerberos files are not in the default include path. Following line can be -# used to fix build issues on such systems (krb5.h not found). -#CFLAGS += -I/usr/include/kerberos - -# Driver interface for generic Linux wireless extensions -# Note: WEXT is deprecated in the current Linux kernel version and no new -# functionality is added to it. nl80211-based interface is the new -# replacement for WEXT and its use allows wpa_supplicant to properly control -# the driver to improve existing functionality like roaming and to support new -# functionality. -CONFIG_DRIVER_WEXT=y - -# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_AP=y +CONFIG_AUTOSCAN_EXPONENTIAL=y +CONFIG_AUTOSCAN_PERIODIC=y +CONFIG_BACKEND=file +CONFIG_BGSCAN_SIMPLE=y +CONFIG_CTRL_IFACE=y +CONFIG_CTRL_IFACE_BUS=y +CONFIG_CTRL_IFACE_DBUS_INTRO=y +CONFIG_CTRL_IFACE_DBUS_NEW=y +CONFIG_DEBUG_FILE=y CONFIG_DRIVER_NL80211=y - -# driver_nl80211.c requires libnl. If you are compiling it yourself -# you may need to point hostapd to your version of libnl. -# -#CFLAGS += -I$<path to libnl include files> -#LIBS += -L$<path to libnl library files> - -# Use libnl v2.0 (or 3.0) libraries. -#CONFIG_LIBNL20=y - -# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) -CONFIG_LIBNL32=y - - -# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) -#CONFIG_DRIVER_BSD=y -#CFLAGS += -I/usr/local/include -#LIBS += -L/usr/local/lib -#LIBS_p += -L/usr/local/lib -#LIBS_c += -L/usr/local/lib - -# Driver interface for Windows NDIS -#CONFIG_DRIVER_NDIS=y -#CFLAGS += -I/usr/include/w32api/ddk -#LIBS += -L/usr/local/lib -# For native build using mingw -#CONFIG_NATIVE_WINDOWS=y -# Additional directories for cross-compilation on Linux host for mingw target -#CFLAGS += -I/opt/mingw/mingw32/include/ddk -#LIBS += -L/opt/mingw/mingw32/lib -#CC=mingw32-gcc -# By default, driver_ndis uses WinPcap for low-level operations. This can be -# replaced with the following option which replaces WinPcap calls with NDISUIO. -# However, this requires that WZC is disabled (net stop wzcsvc) before starting -# wpa_supplicant. -# CONFIG_USE_NDISUIO=y - -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WEXT=y CONFIG_DRIVER_WIRED=y - -# Driver interface for the Broadcom RoboSwitch family -#CONFIG_DRIVER_ROBOSWITCH=y - -# Driver interface for no driver (e.g., WPS ER only) -#CONFIG_DRIVER_NONE=y - -# Solaris libraries -#LIBS += -lsocket -ldlpi -lnsl -#LIBS_c += -lsocket - -# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is -# included) -CONFIG_IEEE8021X_EAPOL=y - -# EAP-MD5 +CONFIG_EAP_FAST=y +CONFIG_EAP_GTC=y +CONFIG_EAP_LEAP=y CONFIG_EAP_MD5=y - -# EAP-MSCHAPv2 CONFIG_EAP_MSCHAPV2=y - -# EAP-TLS -CONFIG_EAP_TLS=y - -# EAL-PEAP +CONFIG_EAP_OTP=y CONFIG_EAP_PEAP=y - -# EAP-TTLS +CONFIG_EAP_PWD=y +CONFIG_EAP_TLS=y CONFIG_EAP_TTLS=y - -# EAP-FAST -# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed -# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., -# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. -CONFIG_EAP_FAST=y - -# EAP-GTC -CONFIG_EAP_GTC=y - -# EAP-OTP -CONFIG_EAP_OTP=y - -# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) -#CONFIG_EAP_SIM=y - -# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y - -# EAP-pwd (secure authentication using only a password) -#CONFIG_EAP_PWD=y - -# EAP-PAX -#CONFIG_EAP_PAX=y - -# LEAP -CONFIG_EAP_LEAP=y - -# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) -#CONFIG_EAP_AKA=y - -# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). -# This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y - -# Enable USIM simulator (Milenage) for EAP-AKA -#CONFIG_USIM_SIMULATOR=y - -# EAP-SAKE -#CONFIG_EAP_SAKE=y - -# EAP-GPSK -#CONFIG_EAP_GPSK=y -# Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y - -# EAP-TNC and related Trusted Network Connect support (experimental) -#CONFIG_EAP_TNC=y - -# Wi-Fi Protected Setup (WPS) -CONFIG_WPS=y -# Enable WSC 2.0 support -#CONFIG_WPS2=y -# Enable WPS external registrar functionality -#CONFIG_WPS_ER=y -# Disable credentials for an open network by default when acting as a WPS -# registrar. -#CONFIG_WPS_REG_DISABLE_OPEN=y -# Enable WPS support with NFC config method -CONFIG_WPS_NFC=y - -# EAP-IKEv2 -#CONFIG_EAP_IKEV2=y - -# EAP-EKE -#CONFIG_EAP_EKE=y - -# PKCS#12 (PFX) support (used to read private key and certificate file from -# a file that usually has extension .p12 or .pfx) -CONFIG_PKCS12=y - -# Smartcard support (i.e., private key on a smartcard), e.g., with openssl -# engine. -CONFIG_SMARTCARD=y - -# PC/SC interface for smartcards (USIM, GSM SIM) -# Enable this if EAP-SIM or EAP-AKA is included -#CONFIG_PCSC=y - -# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +CONFIG_HS20=y CONFIG_HT_OVERRIDES=y - -# Support VHT overrides (disable VHT, mask MCS rates, etc.) -CONFIG_VHT_OVERRIDES=y - -# Development testing -#CONFIG_EAPOL_TEST=y - -# Select control interface backend for external programs, e.g, wpa_cli: -# unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets using localhost (127.0.0.1) -# named_pipe = Windows Named Pipe (default for Windows) -# udp-remote = UDP sockets with remote access (only for tests systems/purpose) -# y = use default (backwards compatibility) -# If this option is commented out, control interface is not included in the -# build. -CONFIG_CTRL_IFACE=y - -# Include support for GNU Readline and History Libraries in wpa_cli. -# When building a wpa_cli binary for distribution, please note that these -# libraries are licensed under GPL and as such, BSD license may not apply for -# the resulting binary. -CONFIG_READLINE=y - -# Include internal line edit mode in wpa_cli. This can be used as a replacement -# for GNU Readline to provide limited command line editing and history support. -#CONFIG_WPA_CLI_EDIT=y - -# Remove debugging code that is printing out debug message to stdout. -# This can be used to reduce the size of the wpa_supplicant considerably -# if debugging code is not needed. The size reduction can be around 35% -# (e.g., 90 kB). -#CONFIG_NO_STDOUT_DEBUG=y - -# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save -# 35-50 kB in code size. -#CONFIG_NO_WPA=y - -# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support -# This option can be used to reduce code size by removing support for -# converting ASCII passphrases into PSK. If this functionality is removed, the -# PSK can only be configured as the 64-octet hexstring (e.g., from -# wpa_passphrase). This saves about 0.5 kB in code size. -#CONFIG_NO_WPA_PASSPHRASE=y - -# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. -# This can be used if ap_scan=1 mode is never enabled. -#CONFIG_NO_SCAN_PROCESSING=y - -# Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf; note: the configuration file -# path is given on command line, not here; this option is just used to -# select the backend that allows configuration files to be used) -# winreg = Windows registry (see win_example.reg for an example) -CONFIG_BACKEND=file - -# Remove configuration write functionality (i.e., to allow the configuration -# file to be updated based on runtime configuration changes). The runtime -# configuration can still be changed, the changes are just not going to be -# persistent over restarts. This option can be used to reduce code size by -# about 3.5 kB. -#CONFIG_NO_CONFIG_WRITE=y - -# Remove support for configuration blobs to reduce code size by about 1.5 kB. -#CONFIG_NO_CONFIG_BLOBS=y - -# Select program entry point implementation: -# main = UNIX/POSIX like main() function (default) -# main_winsvc = Windows service (read parameters from registry) -# main_none = Very basic example (development use only) -#CONFIG_MAIN=main - -# Select wrapper for operatins system and C library specific functions -# unix = UNIX/POSIX like systems (default) -# win32 = Windows systems -# none = Empty template -#CONFIG_OS=unix - -# Select event loop implementation -# eloop = select() loop (default) -# eloop_win = Windows events and WaitForMultipleObject() loop -#CONFIG_ELOOP=eloop - -# Should we use poll instead of select? Select is used by default. -#CONFIG_ELOOP_POLL=y - -# Select layer 2 packet implementation -# linux = Linux packet socket (default) -# pcap = libpcap/libdnet/WinPcap -# freebsd = FreeBSD libpcap -# winpcap = WinPcap with receive thread -# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) -# none = Empty template -#CONFIG_L2_PACKET=linux - -# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) -CONFIG_PEERKEY=y - -# IEEE 802.11w (management frame protection), also known as PMF -# Driver support is also needed for IEEE 802.11w. +CONFIG_IBSS_RSN=y +CONFIG_IEEE80211AC=y +CONFIG_IEEE80211N=y +CONFIG_IEEE80211R=y CONFIG_IEEE80211W=y - -# Select TLS implementation -# openssl = OpenSSL (default) -# gnutls = GnuTLS -# internal = Internal TLSv1 implementation (experimental) -# none = Empty template -#CONFIG_TLS=openssl - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) -# can be enabled to get a stronger construction of messages when block ciphers -# are used. It should be noted that some existing TLS v1.0 -based -# implementation may not be compatible with TLS v1.1 message (ClientHello is -# sent prior to negotiating which version will be used) -#CONFIG_TLSV11=y - -# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) -# can be enabled to enable use of stronger crypto algorithms. It should be -# noted that some existing TLS v1.0 -based implementation may not be compatible -# with TLS v1.2 message (ClientHello is sent prior to negotiating which version -# will be used) -#CONFIG_TLSV12=y - -# If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomMath. Alternatively, an integrated, minimal version of -# LibTomMath can be used. See beginning of libtommath.c for details on benefits -# and drawbacks of this option. -#CONFIG_INTERNAL_LIBTOMMATH=y -#ifndef CONFIG_INTERNAL_LIBTOMMATH -#LTM_PATH=/usr/src/libtommath-0.39 -#CFLAGS += -I$(LTM_PATH) -#LIBS += -L$(LTM_PATH) -#LIBS_p += -L$(LTM_PATH) -#endif -# At the cost of about 4 kB of additional binary size, the internal LibTomMath -# can be configured to include faster routines for exptmod, sqr, and div to -# speed up DH and RSA calculation considerably -#CONFIG_INTERNAL_LIBTOMMATH_FAST=y - -# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. -# This is only for Windows builds and requires WMI-related header files and -# WbemUuid.Lib from Platform SDK even when building with MinGW. -#CONFIG_NDIS_EVENTS_INTEGRATED=y -#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" - -# Add support for old DBus control interface -# (fi.epitest.hostap.WPASupplicant) -CONFIG_CTRL_IFACE_DBUS=y - -# Add support for new DBus control interface -# (fi.w1.hostap.wpa_supplicant1) -CONFIG_CTRL_IFACE_DBUS_NEW=y - -# Add introspection support for new DBus control interface -CONFIG_CTRL_IFACE_DBUS_INTRO=y - -# Add support for loading EAP methods dynamically as shared libraries. -# When this option is enabled, each EAP method can be either included -# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). -# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to -# be loaded in the beginning of the wpa_supplicant configuration file -# (see load_dynamic_eap parameter in the example file) before being used in -# the network blocks. -# -# Note that some shared parts of EAP methods are included in the main program -# and in order to be able to use dynamic EAP methods using these parts, the -# main program must have been build with the EAP method enabled (=y or =dyn). -# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries -# unless at least one of them was included in the main build to force inclusion -# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included -# in the main build to be able to load these methods dynamically. -# -# Please also note that using dynamic libraries will increase the total binary -# size. Thus, it may not be the best option for targets that have limited -# amount of memory/flash. -#CONFIG_DYNAMIC_EAP_METHODS=y - -# IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y - -# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) -CONFIG_DEBUG_FILE=y - -# Send debug messages to syslog instead of stdout -#CONFIG_DEBUG_SYSLOG=y -# Set syslog facility for debug messages -#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON - -# Add support for sending all debug messages (regardless of debug verbosity) -# to the Linux kernel tracing facility. This helps debug the entire stack by -# making it easy to record everything happening from the driver up into the -# same file, e.g., using trace-cmd. -#CONFIG_DEBUG_LINUX_TRACING=y - -# Add support for writing debug log to Android logcat instead of standard -# output -#CONFIG_ANDROID_LOG=y - -# Enable privilege separation (see README 'Privilege separation' for details) -#CONFIG_PRIVSEP=y - -# Enable mitigation against certain attacks against TKIP by delaying Michael -# MIC error reports by a random amount of time between 0 and 60 seconds -#CONFIG_DELAYED_MIC_ERROR_REPORT=y - -# Enable tracing code for developer debugging -# This tracks use of memory allocations and other registrations and reports -# incorrect use with a backtrace of call (or allocation) location. -#CONFIG_WPA_TRACE=y -# For BSD, uncomment these. -#LIBS += -lexecinfo -#LIBS_p += -lexecinfo -#LIBS_c += -lexecinfo - -# Use libbfd to get more details for developer debugging -# This enables use of libbfd to get more detailed symbols for the backtraces -# generated by CONFIG_WPA_TRACE=y. -#CONFIG_WPA_TRACE_BFD=y -# For BSD, uncomment these. -#LIBS += -lbfd -liberty -lz -#LIBS_p += -lbfd -liberty -lz -#LIBS_c += -lbfd -liberty -lz - -# wpa_supplicant depends on strong random number generation being available -# from the operating system. os_get_random() function is used to fetch random -# data when needed, e.g., for key generation. On Linux and BSD systems, this -# works by reading /dev/urandom. It should be noted that the OS entropy pool -# needs to be properly initialized before wpa_supplicant is started. This is -# important especially on embedded devices that do not have a hardware random -# number generator and may by default start up with minimal entropy available -# for random number generation. -# -# As a safety net, wpa_supplicant is by default trying to internally collect -# additional entropy for generating random data to mix in with the data fetched -# from the OS. This by itself is not considered to be very strong, but it may -# help in cases where the system pool is not initialized properly. However, it -# is very strongly recommended that the system pool is initialized with enough -# entropy either by using hardware assisted random number generator or by -# storing state over device reboots. -# -# wpa_supplicant can be configured to maintain its own entropy store over -# restarts to enhance random number generation. This is not perfect, but it is -# much more secure than using the same sequence of random numbers after every -# reboot. This can be enabled with -e<entropy file> command line option. The -# specified file needs to be readable and writable by wpa_supplicant. -# -# If the os_get_random() is known to provide strong random data (e.g., on -# Linux/BSD, the board in question is known to have reliable source of random -# data from /dev/urandom), the internal wpa_supplicant random pool can be -# disabled. This will save some in binary size and CPU use. However, this -# should only be considered for builds that are known to be used on devices -# that meet the requirements described above. +CONFIG_IEEE8021X_EAPOL=y +CONFIG_INTERWORKING=y +CONFIG_IPV6=y +CONFIG_LIBNL32=y CONFIG_NO_RANDOM_POOL=y - -# IEEE 802.11n (High Throughput) support (mainly for AP mode) -CONFIG_IEEE80211N=y - -# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) -# (depends on CONFIG_IEEE80211N) -CONFIG_IEEE80211AC=y - -# Wireless Network Management (IEEE Std 802.11v-2011) -# Note: This is experimental and not complete implementation. -#CONFIG_WNM=y - -# Interworking (IEEE 802.11u) -# This can be used to enable functionality to improve interworking with -# external networks (GAS/ANQP to learn more about the networks and network -# selection based on available credentials). -#CONFIG_INTERWORKING=y - -# Hotspot 2.0 -#CONFIG_HS20=y - -# Disable roaming in wpa_supplicant -#CONFIG_NO_ROAMING=y - -# AP mode operations with wpa_supplicant -# This can be used for controlling AP mode operations with wpa_supplicant. It -# should be noted that this is mainly aimed at simple cases like -# WPA2-Personal while more complex configurations like WPA2-Enterprise with an -# external RADIUS server can be supported with hostapd. -CONFIG_AP=y - -# P2P (Wi-Fi Direct) -# This can be used to enable P2P support in wpa_supplicant. See README-P2P for -# more information on P2P operations. CONFIG_P2P=y - -# Enable TDLS support +CONFIG_PEERKEY=y +CONFIG_PKCS12=y +CONFIG_READLINE=y +CONFIG_SMARTCARD=y CONFIG_TDLS=y - -# Wi-Fi Direct -# This can be used to enable Wi-Fi Direct extensions for P2P using an external -# program to control the additional information exchanges in the messages. +CONFIG_VHT_OVERRIDES=y CONFIG_WIFI_DISPLAY=y - -# Autoscan -# This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. -# -# Enabling directly a module will enable autoscan support. -# For exponential module: -CONFIG_AUTOSCAN_EXPONENTIAL=y -# For periodic module: -CONFIG_AUTOSCAN_PERIODIC=y - -# Password (and passphrase, etc.) backend for external storage -# These optional mechanisms can be used to add support for storing passwords -# and other secrets in external (to wpa_supplicant) location. This allows, for -# example, operating system specific key storage to be used -# -# External password backend for testing purposes (developer use) -#CONFIG_EXT_PASSWORD_TEST=y - -# Options that are present not in defconfig: - -# RSN IBSS/AdHoc support -CONFIG_IBSS_RSN=y - -# Simple background scan -CONFIG_BGSCAN_SIMPLE=y +CONFIG_WPS=y +CONFIG_WPS_NFC=y +CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW:3DES" |