diff options
Diffstat (limited to 'abs/core/wpa_supplicant')
| -rw-r--r-- | abs/core/wpa_supplicant/PKGBUILD | 36 | ||||
| -rw-r--r-- | abs/core/wpa_supplicant/config | 308 | ||||
| -rw-r--r-- | abs/core/wpa_supplicant/wpa_supplicant.install | 15 |
3 files changed, 359 insertions, 0 deletions
diff --git a/abs/core/wpa_supplicant/PKGBUILD b/abs/core/wpa_supplicant/PKGBUILD new file mode 100644 index 0000000..2f022ce --- /dev/null +++ b/abs/core/wpa_supplicant/PKGBUILD @@ -0,0 +1,36 @@ +# Contributor: iztok pizorn <pizorn@gmail.com> +# Contributor: William Rea <sillywilly@gmail.com> +pkgname=wpa_supplicant +pkgver=0.5.10 +_madwifi_ver=0.9.4 +pkgrel=10 +pkgdesc="A utility providing key negotiation for WPA wireless networks" +arch=('i686' 'x86_64') +makedepends=('kernel26>=2.6.24' 'kernel26<=2.6.26.3') +depends=('openssl') +license=('GPL') +groups=('base') +backup=('etc/wpa_supplicant.conf') +url="http://hostap.epitest.fi/wpa_supplicant" +source=(http://hostap.epitest.fi/releases/wpa_supplicant-$pkgver.tar.gz + config + http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz) +install='wpa_supplicant.install' +md5sums=('9e7b99da67c47d81121368c6d580d069' + '87a7bb38e0b4820b29065a9b3e8f4e06' + '399d20de8d855a59f20058857c2178ad') + +build() { + cd ${startdir}/src/ + mv madwifi-${_madwifi_ver} madwifi + cd $startdir/src/$pkgname-$pkgver + cp ../config ./.config + sed -i 's@/usr/local@$(PREFIX)@g' Makefile + sed -i 's@dynamic_eap_methods@@g' Makefile + make || return 1 + make PREFIX=/usr DESTDIR=$startdir/pkg install || return 1 + install -D -m644 wpa_supplicant.conf $startdir/pkg/etc/wpa_supplicant.conf || return 1 + install -d -m755 $startdir/pkg/usr/man/man{5,8} || return 1 + install -m644 doc/docbook/wpa_supplicant.conf.5 $startdir/pkg/usr/man/man5 || return 1 + install -m644 doc/docbook/{wpa_background,wpa_cli,wpa_passphrase,wpa_supplicant}.8 $startdir/pkg/usr/man/man8 || return 1 +} diff --git a/abs/core/wpa_supplicant/config b/abs/core/wpa_supplicant/config new file mode 100644 index 0000000..8841fe3 --- /dev/null +++ b/abs/core/wpa_supplicant/config @@ -0,0 +1,308 @@ +# Example wpa_supplicant build time configuration +# +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cases, these lines should use += in order not +# to override previous values of the variables. + + +# Uncomment following two lines and fix the paths if you have installed OpenSSL +# or GnuTLS in non-default location +#CFLAGS += -I/usr/local/openssl/include +#LIBS += -L/usr/local/openssl/lib + +# Some Red Hat versions seem to include kerberos header files from OpenSSL, but +# the kerberos files are not in the default include path. Following line can be +# used to fix build issues on such systems (krb5.h not found). +#CFLAGS += -I/usr/include/kerberos + +# Example configuration for various cross-compilation platforms + +#### sveasoft (e.g., for Linksys WRT54G) ###################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS += -I../src/include -I../../src/router/openssl/include +#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl +############################################################################### + +#### openwrt (e.g., for Linksys WRT54G) ####################################### +#CC=mipsel-uclibc-gcc +#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc +#CFLAGS += -Os +#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ +# -I../WRT54GS/release/src/include +#LIBS = -lssl +############################################################################### + + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +# Change include directories to match with the local setup +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf +#CFLAGS += -I../../include/wireless + +# Driver interface for madwifi driver +CONFIG_DRIVER_MADWIFI=y +# Change include directories to match with the local setup +CFLAGS += -I../madwifi + +# Driver interface for Prism54 driver +# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is +# for developers only) +CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y +# Example path for wlioctl.h; change to match your configuration +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100/2200 driver +CONFIG_DRIVER_IPW=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for Windows NDIS +#CONFIG_DRIVER_NDIS=y +#CFLAGS += -I/usr/include/w32api/ddk +#LIBS += -L/usr/local/lib +# For native build using mingw +#CONFIG_NATIVE_WINDOWS=y +# Additional directories for cross-compilation on Linux host for mingw target +#CFLAGS += -I/opt/mingw/mingw32/include/ddk +#LIBS += -L/opt/mingw/mingw32/lib +#CC=mingw32-gcc +# By default, driver_ndis uses WinPcap for low-level operations. This can be +# replaced with the following option which replaces WinPcap calls with NDISUIO. +# However, this requires that WZC is disabled (net stop wzcsvc) before starting +# wpa_supplicant. +# CONFIG_USE_NDISUIO=y + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# EAP-SAKE +#CONFIG_EAP_SAKE=y + +# EAP-GPSK +#CONFIG_EAP_GPSK=y +# Include support for optional SHA256 cipher suite in EAP-GPSK +#CONFIG_EAP_GPSK_SHA256=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Select control interface backend for external programs, e.g, wpa_cli: +# unix = UNIX domain sockets (default for Linux/*BSD) +# udp = UDP sockets (default for Windows) +# y = use default (backwards compatibility) +# If this option is commented out, control interface is not included in the +# build. +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to +# save about 1 kB in code size when building only WPA-Personal (no EAP support) +# or 6 kB if building for WPA-Enterprise. +#CONFIG_NO_WPA2=y + +# Remove AES extra functions. This can be used to reduce code size by about +# 1.5 kB by removing extra AES modes that are not needed for commonly used +# client configurations (they are needed for some EAP types). +#CONFIG_NO_AES_EXTRAS=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) +# none = Empty template +#CONFIG_L2_PACKET=linux + +# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection +#CONFIG_STAKEY=y + +# Proposed replacement for STAKey negotiation: PeerKey handshake for +# Station to Station Link +CONFIG_PEERKEY=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# internal = Internal TLSv1 implementation (experimental) +# none = Empty template +#CONFIG_TLS=openssl + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +#CONFIG_GNUTLS_EXTRA=y + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomCrypt and TomsFastMath. +#LTC_PATH=/usr/src/libtomcrypt-1.11 +#TFM_PATH=/usr/src/tomsfastmath-0.09 +#CFLAGS += -I$(LTC_PATH)/src/headers +#LIBS += -L$(LTC_PATH) -L$(TFM_PATH) +#LIBS_p += -L$(LTC_PATH) -L$(TFM_PATH) + +# Integrate ndis_events.exe functionality into wpa_supplicant. +# This is only for Windows builds and requires WMI-related header files and +# WbemUuid.Lib from Platform SDK even when building with MinGW. +#CONFIG_NDIS_EVENTS_INTEGRATED=y +#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" + +# Add support for DBus control interface +#CONFIG_CTRL_IFACE_DBUS=y + +# Add support for loading EAP methods dynamically as shared libraries. +# When this option is enabled, each EAP method can be either included +# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn). +# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to +# be loaded in the beginning of the wpa_supplicant configuration file +# (see load_dynamic_eap parameter in the example file) before being used in +# the network blocks. +# +# Note that some shared parts of EAP methods are included in the main program +# and in order to be able to use dynamic EAP methods using these parts, the +# main program must have been build with the EAP method enabled (=y or =dyn). +# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries +# unless at least one of them was included in the main build to force inclusion +# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included +# in the main build to be able to load these methods dynamically. +# +# Please also note that using dynamic libraries will increase the total binary +# size. Thus, it may not be the best option for targets that have limited +# amount of memory/flash. +CONFIG_DYNAMIC_EAP_METHODS=y + +# Include client MLME (management frame processing). +# This can be used to move MLME processing of Devicescape IEEE 802.11 stack +# into user space. +#CONFIG_CLIENT_MLME=y +# Currently, driver_devicescape.c build requires some additional parameters +# to be able to include some of the kernel header files. Following lines can +# be used to set these (WIRELESS_DEV must point to the root directory of the +# wireless-dev.git tree). +WIRELESS_DEV=/lib/modules/2.6.24-ARCH/build +CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 diff --git a/abs/core/wpa_supplicant/wpa_supplicant.install b/abs/core/wpa_supplicant/wpa_supplicant.install new file mode 100644 index 0000000..0c31765 --- /dev/null +++ b/abs/core/wpa_supplicant/wpa_supplicant.install @@ -0,0 +1,15 @@ +# arg 1: the new package version +post_install() { + post_upgrade +} + +# arg 1: the new package version +# arg 2: the old package version +post_upgrade() { + echo "==> For wpa_gui please install 'wpa_supplicant_gui'" +} + +op=$1 +shift + +$op $* |