diff options
Diffstat (limited to 'abs/core/wpa_supplicant')
| -rw-r--r-- | abs/core/wpa_supplicant/PKGBUILD | 52 | ||||
| -rw-r--r-- | abs/core/wpa_supplicant/config | 148 | ||||
| -rw-r--r-- | abs/core/wpa_supplicant/wpa_supplicant.install | 15 |
3 files changed, 140 insertions, 75 deletions
diff --git a/abs/core/wpa_supplicant/PKGBUILD b/abs/core/wpa_supplicant/PKGBUILD index 2f022ce..3ecc4a8 100644 --- a/abs/core/wpa_supplicant/PKGBUILD +++ b/abs/core/wpa_supplicant/PKGBUILD @@ -1,36 +1,42 @@ -# Contributor: iztok pizorn <pizorn@gmail.com> -# Contributor: William Rea <sillywilly@gmail.com> +# $Id: PKGBUILD 32196 2009-03-29 14:55:53Z thomas $ +# Maintainer: Thomas Baechler <thomas@archlinux.org> + pkgname=wpa_supplicant -pkgver=0.5.10 -_madwifi_ver=0.9.4 -pkgrel=10 +pkgver=0.6.9 +#_madwifi_ver=0.9.4 +pkgrel=1 pkgdesc="A utility providing key negotiation for WPA wireless networks" arch=('i686' 'x86_64') -makedepends=('kernel26>=2.6.24' 'kernel26<=2.6.26.3') -depends=('openssl') +depends=('openssl' 'dbus-core>=1.2.4' 'readline' 'libnl') +optdepends=('wpa_supplicant_gui: wpa_gui program') license=('GPL') groups=('base') backup=('etc/wpa_supplicant.conf') url="http://hostap.epitest.fi/wpa_supplicant" source=(http://hostap.epitest.fi/releases/wpa_supplicant-$pkgver.tar.gz - config - http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz) -install='wpa_supplicant.install' -md5sums=('9e7b99da67c47d81121368c6d580d069' - '87a7bb38e0b4820b29065a9b3e8f4e06' - '399d20de8d855a59f20058857c2178ad') + config) + #http://downloads.sourceforge.net/sourceforge/madwifi/madwifi-${_madwifi_ver}.tar.gz) +md5sums=('0efb8fcedf0a8acf6f423dfdb0658fdd' + 'd472554904cca44e1090e25dea7b03c9') + #'399d20de8d855a59f20058857c2178ad') build() { - cd ${startdir}/src/ - mv madwifi-${_madwifi_ver} madwifi - cd $startdir/src/$pkgname-$pkgver - cp ../config ./.config + cd "${srcdir}" + #mv madwifi-${_madwifi_ver} madwifi + cd "${srcdir}/${pkgname}-${pkgver}/${pkgname}" + cp ${srcdir}/config ./.config sed -i 's@/usr/local@$(PREFIX)@g' Makefile - sed -i 's@dynamic_eap_methods@@g' Makefile make || return 1 - make PREFIX=/usr DESTDIR=$startdir/pkg install || return 1 - install -D -m644 wpa_supplicant.conf $startdir/pkg/etc/wpa_supplicant.conf || return 1 - install -d -m755 $startdir/pkg/usr/man/man{5,8} || return 1 - install -m644 doc/docbook/wpa_supplicant.conf.5 $startdir/pkg/usr/man/man5 || return 1 - install -m644 doc/docbook/{wpa_background,wpa_cli,wpa_passphrase,wpa_supplicant}.8 $startdir/pkg/usr/man/man8 || return 1 + make PREFIX=/usr DESTDIR="${pkgdir}" install || return 1 + install -m755 -d "${pkgdir}/etc" + install -m644 wpa_supplicant.conf "${pkgdir}/etc/wpa_supplicant.conf" || return 1 + install -d -m755 ${pkgdir}/usr/share/man/man{5,8} || return 1 + install -m644 doc/docbook/wpa_supplicant.conf.5 "${pkgdir}/usr/share/man/man5/" || return 1 + install -m644 doc/docbook/{wpa_background,wpa_cli,wpa_passphrase,wpa_supplicant}.8 "${pkgdir}/usr/share/man/man8/" || return 1 + + install -m755 -d "${pkgdir}/usr/share/dbus-1/system-services" + install -m644 dbus-wpa_supplicant.service "${pkgdir}/usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service" || return 1 + sed -e 's/sbin/usr\/sbin/' -i "${pkgdir}/usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service" || return 1 + install -m755 -d "${pkgdir}/etc/dbus-1/system.d" + install -m644 dbus-wpa_supplicant.conf "${pkgdir}/etc/dbus-1/system.d/fi.epitest.hostap.WPASupplicant.conf" || return 1 } diff --git a/abs/core/wpa_supplicant/config b/abs/core/wpa_supplicant/config index 8841fe3..e3582bf 100644 --- a/abs/core/wpa_supplicant/config +++ b/abs/core/wpa_supplicant/config @@ -41,7 +41,7 @@ # Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y +#CONFIG_DRIVER_HOSTAP=y # Driver interface for Agere driver #CONFIG_DRIVER_HERMES=y @@ -50,14 +50,14 @@ CONFIG_DRIVER_HOSTAP=y #CFLAGS += -I../../include/wireless # Driver interface for madwifi driver -CONFIG_DRIVER_MADWIFI=y -# Change include directories to match with the local setup -CFLAGS += -I../madwifi +#CONFIG_DRIVER_MADWIFI=y +# Set include directory to the madwifi source tree +#CFLAGS += -I../../madwifi # Driver interface for Prism54 driver # (Note: Prism54 is not yet supported, i.e., this will not work as-is and is # for developers only) -CONFIG_DRIVER_PRISM54=y +#CONFIG_DRIVER_PRISM54=y # Driver interface for ndiswrapper CONFIG_DRIVER_NDISWRAPPER=y @@ -65,17 +65,26 @@ CONFIG_DRIVER_NDISWRAPPER=y # Driver interface for Atmel driver CONFIG_DRIVER_ATMEL=y -# Driver interface for Broadcom driver +# Driver interface for old Broadcom driver +# Please note that the newer Broadcom driver ("hybrid Linux driver") supports +# Linux wireless extensions and does not need (or even work) with the old +# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. #CONFIG_DRIVER_BROADCOM=y # Example path for wlioctl.h; change to match your configuration #CFLAGS += -I/opt/WRT54GS/release/src/include # Driver interface for Intel ipw2100/2200 driver -CONFIG_DRIVER_IPW=y +#CONFIG_DRIVER_IPW=y + +# Driver interface for Ralink driver +#CONFIG_DRIVER_RALINK=y # Driver interface for generic Linux wireless extensions CONFIG_DRIVER_WEXT=y +# Driver interface for Linux drivers using the nl80211 kernel interface +CONFIG_DRIVER_NL80211=y + # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include @@ -103,6 +112,9 @@ CONFIG_DRIVER_WEXT=y # Driver interface for wired Ethernet drivers CONFIG_DRIVER_WIRED=y +# Driver interface for the Broadcom RoboSwitch family +#CONFIG_DRIVER_ROBOSWITCH=y + # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is # included) CONFIG_IEEE8021X_EAPOL=y @@ -122,6 +134,13 @@ CONFIG_EAP_PEAP=y # EAP-TTLS CONFIG_EAP_TTLS=y +# EAP-FAST +# Note: Default OpenSSL package does not include support for all the +# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, +# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) +# to add the needed functions. +#CONFIG_EAP_FAST=y + # EAP-GTC CONFIG_EAP_GTC=y @@ -143,6 +162,13 @@ CONFIG_EAP_LEAP=y # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) #CONFIG_EAP_AKA=y +# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). +# This requires CONFIG_EAP_AKA to be enabled, too. +#CONFIG_EAP_AKA_PRIME=y + +# Enable USIM simulator (Milenage) for EAP-AKA +#CONFIG_USIM_SIMULATOR=y + # EAP-SAKE #CONFIG_EAP_SAKE=y @@ -151,6 +177,15 @@ CONFIG_EAP_LEAP=y # Include support for optional SHA256 cipher suite in EAP-GPSK #CONFIG_EAP_GPSK_SHA256=y +# EAP-TNC and related Trusted Network Connect support (experimental) +#CONFIG_EAP_TNC=y + +# Wi-Fi Protected Setup (WPS) +CONFIG_WPS=y + +# EAP-IKEv2 +#CONFIG_EAP_IKEV2=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y @@ -166,13 +201,10 @@ CONFIG_SMARTCARD=y # Development testing #CONFIG_EAPOL_TEST=y -# Replace native Linux implementation of packet sockets with libdnet/libpcap. -# This will be automatically set for non-Linux OS. -#CONFIG_DNET_PCAP=y - # Select control interface backend for external programs, e.g, wpa_cli: # unix = UNIX domain sockets (default for Linux/*BSD) -# udp = UDP sockets (default for Windows) +# udp = UDP sockets using localhost (127.0.0.1) +# named_pipe = Windows Named Pipe (default for Windows) # y = use default (backwards compatibility) # If this option is commented out, control interface is not included in the # build. @@ -182,7 +214,7 @@ CONFIG_CTRL_IFACE=y # When building a wpa_cli binary for distribution, please note that these # libraries are licensed under GPL and as such, BSD license may not apply for # the resulting binary. -#CONFIG_READLINE=y +CONFIG_READLINE=y # Remove debugging code that is printing out debug message to stdout. # This can be used to reduce the size of the wpa_supplicant considerably @@ -199,16 +231,39 @@ CONFIG_CTRL_IFACE=y # or 6 kB if building for WPA-Enterprise. #CONFIG_NO_WPA2=y +# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support +# This option can be used to reduce code size by removing support for +# converting ASCII passphrases into PSK. If this functionality is removed, the +# PSK can only be configured as the 64-octet hexstring (e.g., from +# wpa_passphrase). This saves about 0.5 kB in code size. +#CONFIG_NO_WPA_PASSPHRASE=y + # Remove AES extra functions. This can be used to reduce code size by about # 1.5 kB by removing extra AES modes that are not needed for commonly used # client configurations (they are needed for some EAP types). #CONFIG_NO_AES_EXTRAS=y +# Disable scan result processing (ap_mode=1) to save code size by about 1 kB. +# This can be used if ap_scan=1 mode is never enabled. +#CONFIG_NO_SCAN_PROCESSING=y + # Select configuration backend: -# file = text file (e.g., wpa_supplicant.conf) +# file = text file (e.g., wpa_supplicant.conf; note: the configuration file +# path is given on command line, not here; this option is just used to +# select the backend that allows configuration files to be used) # winreg = Windows registry (see win_example.reg for an example) CONFIG_BACKEND=file +# Remove configuration write functionality (i.e., to allow the configuration +# file to be updated based on runtime configuration changes). The runtime +# configuration can still be changed, the changes are just not going to be +# persistent over restarts. This option can be used to reduce code size by +# about 3.5 kB. +#CONFIG_NO_CONFIG_WRITE=y + +# Remove support for configuration blobs to reduce code size by about 1.5 kB. +#CONFIG_NO_CONFIG_BLOBS=y + # Select program entry point implementation: # main = UNIX/POSIX like main() function (default) # main_winsvc = Windows service (read parameters from registry) @@ -236,13 +291,15 @@ CONFIG_BACKEND=file # none = Empty template #CONFIG_L2_PACKET=linux -# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection -#CONFIG_STAKEY=y - -# Proposed replacement for STAKey negotiation: PeerKey handshake for -# Station to Station Link +# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y +# IEEE 802.11w (management frame protection) +# This version is an experimental implementation based on IEEE 802.11w/D1.0 +# draft and is subject to change since the standard has not yet been finalized. +# Driver support is also needed for IEEE 802.11w. +#CONFIG_IEEE80211W=y + # Select TLS implementation # openssl = OpenSSL (default) # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) @@ -259,21 +316,29 @@ CONFIG_PEERKEY=y #CONFIG_GNUTLS_EXTRA=y # If CONFIG_TLS=internal is used, additional library and include paths are -# needed for LibTomCrypt and TomsFastMath. -#LTC_PATH=/usr/src/libtomcrypt-1.11 -#TFM_PATH=/usr/src/tomsfastmath-0.09 -#CFLAGS += -I$(LTC_PATH)/src/headers -#LIBS += -L$(LTC_PATH) -L$(TFM_PATH) -#LIBS_p += -L$(LTC_PATH) -L$(TFM_PATH) - -# Integrate ndis_events.exe functionality into wpa_supplicant. +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Include NDIS event processing through WMI into wpa_supplicant/wpasvc. # This is only for Windows builds and requires WMI-related header files and # WbemUuid.Lib from Platform SDK even when building with MinGW. #CONFIG_NDIS_EVENTS_INTEGRATED=y #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" # Add support for DBus control interface -#CONFIG_CTRL_IFACE_DBUS=y +CONFIG_CTRL_IFACE_DBUS=y # Add support for loading EAP methods dynamically as shared libraries. # When this option is enabled, each EAP method can be either included @@ -294,15 +359,24 @@ CONFIG_PEERKEY=y # Please also note that using dynamic libraries will increase the total binary # size. Thus, it may not be the best option for targets that have limited # amount of memory/flash. -CONFIG_DYNAMIC_EAP_METHODS=y +#CONFIG_DYNAMIC_EAP_METHODS=y # Include client MLME (management frame processing). -# This can be used to move MLME processing of Devicescape IEEE 802.11 stack -# into user space. +# This can be used to move MLME processing of Linux mac80211 stack into user +# space. Please note that this is currently only available with +# driver_nl80211.c and only with a modified version of Linux kernel and +# wpa_supplicant. #CONFIG_CLIENT_MLME=y -# Currently, driver_devicescape.c build requires some additional parameters -# to be able to include some of the kernel header files. Following lines can -# be used to set these (WIRELESS_DEV must point to the root directory of the -# wireless-dev.git tree). -WIRELESS_DEV=/lib/modules/2.6.24-ARCH/build -CFLAGS += -I$(WIRELESS_DEV)/net/mac80211 + +# IEEE Std 802.11r-2008 (Fast BSS Transition) +#CONFIG_IEEE80211R=y + +# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) +#CONFIG_DEBUG_FILE=y + +# Enable privilege separation (see README 'Privilege separation' for details) +#CONFIG_PRIVSEP=y + +# Enable mitigation against certain attacks against TKIP by delaying Michael +# MIC error reports by a random amount of time between 0 and 60 seconds +#CONFIG_DELAYED_MIC_ERROR_REPORT=y diff --git a/abs/core/wpa_supplicant/wpa_supplicant.install b/abs/core/wpa_supplicant/wpa_supplicant.install deleted file mode 100644 index 0c31765..0000000 --- a/abs/core/wpa_supplicant/wpa_supplicant.install +++ /dev/null @@ -1,15 +0,0 @@ -# arg 1: the new package version -post_install() { - post_upgrade -} - -# arg 1: the new package version -# arg 2: the old package version -post_upgrade() { - echo "==> For wpa_gui please install 'wpa_supplicant_gui'" -} - -op=$1 -shift - -$op $* |