diff options
Diffstat (limited to 'abs/core')
84 files changed, 1 insertions, 15468 deletions
diff --git a/abs/core/system-templates/PKGBUILD b/abs/core/system-templates/PKGBUILD index 1079890..25c83f2 100755 --- a/abs/core/system-templates/PKGBUILD +++ b/abs/core/system-templates/PKGBUILD @@ -1,6 +1,6 @@ pkgname=system-templates pkgver=2.0 -pkgrel=12 +pkgrel=13 conflicts=( ) pkgdesc="Templates used for system configuration" depends=() diff --git a/abs/core/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf b/abs/core/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf deleted file mode 100755 index d30e172..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf +++ /dev/null @@ -1,66 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.8.0(userspace) on Mon Feb 20 23:15:48 2006 -# -# contributed by Joris Patroons -# -# brand: AVerMedia -# model no. of remote control: Unknown -# devices being controlled by this remote: -# AVerTV DVB-T 771 - -begin remote - - name a771 - bits 32 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - gap 108056 - toggle_bit 0 - - - begin codes - SOURCE 0x40BF807F - TELETEXT 0x40BF40BF - POWER 0x40BF00FF - 1 0x40BFA05F - 2 0x40BF609F - 3 0x40BFE01F - 4 0x40BF906F - 5 0x40BF50AF - 6 0x40BFD02F - 7 0x40BFB04F - 8 0x40BF708F - 9 0x40BFF00F - 0 0x40BF8877 - AUDIO 0x40BF10EF - FULLSCREEN 0x40BF30CF - DISPLAY 0x40BF48B7 - LOOP 0x40BFC837 - PREVIEW 0x40BF08F7 - BACKWARD 0x40BFA857 - FORWARD 0x40BF6897 - CAPTURE 0x40BFE817 - MUTE 0x40BF28D7 - RECORD 0x40BF9867 - PAUSE 0x40BF58A7 - STOP 0x40BFD827 - PLAY 0x40BF18E7 - RED 0x40BFB847 - GREEN 0xC03F807F - YELLOW 0x40BF38C7 - BLUE 0xC03F00FF - VOL_DOWN 0x40BF7887 - VOL_UP 0x40BFF807 - CH_DOWN 0xC03F40BF - CH_UP 0xC03FC03F - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt b/abs/core/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt deleted file mode 100755 index 2aa9e09..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt +++ /dev/null @@ -1,475 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = CH_UP -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = CH_UP -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VOL_UP -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VOL_DOWN -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = PLAY -config = Return -end - -# Stop -begin -prog = mythtv -button = STOP -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = POWER -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = PAUSE -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = FORWARD -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = BACKWARD -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = CAPTURE -config = R -end - -# Delete -begin -prog = mythtv -button = RED -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = PREVIEW -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = TELETEXT -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = DISPLAY -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = PREVIEW -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = TELETEXT -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = MUTE -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = BACKWARD -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FORWARD -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = STOP -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULLSCREEN -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = STOP -config = Quit -end - -begin -prog = xine -button = PAUSE -config = Pause -end - -begin -prog = xine -button = -config = EventUp -end - -begin -prog = xine -button = -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = PREVIEW -config = Menu -end - -begin -prog = xine -button = FORWARD -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = BACKWARD -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -config = Volume- -end - -begin -prog = xine -button = MUTE -config = Mute -end - -begin -prog = xine -button = STOP -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = TELETEXT -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avermedia_77x/preview.jpg b/abs/core/system-templates/templates/remotes/Avermedia_77x/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_77x/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf b/abs/core/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf deleted file mode 100755 index bfc07b9..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf +++ /dev/null @@ -1,97 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 -# -# contributed by Christoph Bartelmus <lirc@bartelmus.de> -# -# brand: AVerMedia -# model: ? (36 buttons) -# supported devices: TVPhone98 card (ID 0x00031461) -# TVCapture98 card (ID 0x00041461) -# -# This config file does work with both homebrew receivers and -# original AVerMedia TV cards !!! -# - -begin remote - - name TVPhone98 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0x40BF - gap 108056 - repeat_bit 0 - - begin codes - POWER 0x00000000000000FF - TV/FM 0x000000000000807F - CD 0x00000000000040BF - TELETEXT 0x000000000000C03F - VIDEO 0x00000000000020DF - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - AUDIO 0x00000000000010EF - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - FULLSCREEN 0x00000000000030CF - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - - PREVIEW 0x00000000000008F7 - 0 0x0000000000008877 - DISPLAY 0x00000000000048B7 - LOOP 0x000000000000C837 - MUTE 0x00000000000028D7 - AUTOSCAN 0x000000000000A857 - FREEZE 0x0000000000006897 - CAPTURE 0x000000000000E817 - PLAY 0x00000000000018E7 - RECORD 0x0000000000009867 - PAUSE 0x00000000000058A7 - STOP 0x000000000000D827 - YELLOW 0x00000000000038C7 - RED 0x000000000000B847 - VOL_DOWN 0x0000000000007887 - VOL_UP 0x000000000000F807 - end codes - -end remote - -begin remote - - name TVPhone98_ext - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0xC03F - gap 108056 - repeat_bit 0 - - begin codes - BLUE 0x00000000000000FF - GREEN 0x000000000000807F - CH_DOWN 0x00000000000040BF - CH_UP 0x000000000000C03F - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt b/abs/core/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt deleted file mode 100755 index f8fb43a..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt +++ /dev/null @@ -1,477 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = CH_UP -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -# General Left -begin -prog = mythtv -button = LEFT -config = Left -end - -# General Right -begin -prog = mythtv -button = RIGHT -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = CH_UP -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VOL_UP -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VOL_DOWN -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = UNLABELED -config = Space -end - -# Play -begin -prog = mythtv -button = PLAY -config = Return -end - -# Stop -begin -prog = mythtv -button = STOP -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = POWER -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = PAUSE -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -remote = TVPhone98_ext -prog = mythtv -button = BLUE -config = Left -end - -# Skip forward (10 min default) -begin -remote = TVPhone98_ext -prog = mythtv -button = GREEN -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = CAPTURE -config = R -end - -# Delete -begin -prog = mythtv -button = RED -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = YELLOW -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = TELETEXT -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = DISPLAY -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = VIDEO -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = TELETEXT -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = MUTE -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = STOP -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULLSCREEN -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = STOP -config = Quit -end - -begin -prog = xine -button = PAUSE -config = Pause -end - -begin -prog = xine -button = -config = EventUp -end - -begin -prog = xine -button = -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = PREVIEW -config = Menu -end - -begin -prog = xine -button = -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -config = Volume- -end - -begin -prog = xine -button = MUTE -config = Mute -end - -begin -prog = xine -button = STOP -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = TELETEXT -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avermedia_98/preview.jpg b/abs/core/system-templates/templates/remotes/Avermedia_98/preview.jpg Binary files differdeleted file mode 100644 index a2382d2..0000000 --- a/abs/core/system-templates/templates/remotes/Avermedia_98/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf b/abs/core/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf deleted file mode 100755 index 391c8d4..0000000 --- a/abs/core/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf +++ /dev/null @@ -1,65 +0,0 @@ -#
-# this config file was created by using lirc-0.8 on Thu Sept 14 2006
-#
-# contributed by elturisto
-#
-# brand: AVerMedia
-# model no. of remote control: RM-FP
-# devices being controlled by this remote: AVerMedia DVB-T USB2.0 (A800)
-#
-
-begin remote
-
- name rmfp
- bits 32
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 8967 4524
- one 565 1682
- zero 565 559
- ptrail 561
- repeat 8968 2276
- gap 107905
- toggle_bit 0
-
-
- begin codes
- power 0x00010074
- source 0x00010094
- 1 0x00010002
- 2 0x00010003
- 3 0x00010004
- 4 0x00010005
- 5 0x00010006
- 6 0x00010007
- 7 0x00010008
- 8 0x00010009
- 9 0x0001000a
- 0 0x0001000b
- display 0x00010095
- snapshot 0x00010069
- chrtn 0x0001006a
- chprev 0x000100ca
- chup 0x00010192
- chdown 0x00010193
- voldown 0x00010072
- volup 0x00010073
- fullscreen 0x00010174
- mute 0x00010071
- audio 0x00010188
- record 0x000100a7
- play 0x000100cf
- stop 0x00010080
- pause 0x000100a4
- rewind 0x0001009e
- forward 0x0001009f
- teletext 0x00010184
- last 0x00010194
- next 0x00010195
- epg 0x0001016d
- menu 0x0001008b
- end codes
-
-end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt b/abs/core/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt deleted file mode 100755 index dc28857..0000000 --- a/abs/core/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt +++ /dev/null @@ -1,482 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = chup -config = Up -end - -# Channel Down -begin -prog = mythtv -button = chdown -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = chup -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = chdown -config = Down -end - -# Volume Up -begin -prog = mythtv -button = volup -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = voldown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = forward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = next -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = last -config = PgUp -end - -# Record -begin -prog = mythtv -button = record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = epg -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = menu -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = display -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = chprev -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = teletext -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = snapshot -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = menu -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = forward -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = rewind -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = next -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = last -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = display -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = chup -config = EventUp -end - -begin -prog = xine -button = chdown -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = menu -config = Menu -end - -begin -prog = xine -button = forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = volup -config = Volume+ -end - -begin -prog = xine -button = voldown -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = next -config = EventNext -end - -begin -prog = xine -button = last -config = EventPrior -end - -begin -prog = xine -button = display -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Avertv_USB/preview.jpg b/abs/core/system-templates/templates/remotes/Avertv_USB/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Avertv_USB/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf b/abs/core/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf deleted file mode 100755 index 8b0bd3c..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf +++ /dev/null @@ -1,67 +0,0 @@ -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0 (devinput) on Sun Feb 27 18:29:35 2005 -# -# -# brand: Terratec_Cinergy_Remote -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - -name Terratec_Cinergy_Remote -bits 16 -eps 30 -aeps 100 -one 0 0 -zero 0 0 -pre_data_bits 16 -pre_data 0x8001 -gap 237493 -toggle_bit 0 - - - begin codes - power 0x0000000000000074 - app 0x0000000000000094 - zoom 0x0000000000000174 - 1 0x000000000000004F - 2 0x0000000000000050 - 3 0x0000000000000051 - 4 0x000000000000004B - 5 0x000000000000004C - 6 0x000000000000004D - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x0000000000000052 - chup 0x0000000000000192 - chdown 0x0000000000000193 - volup 0x0000000000000073 - voldown 0x0000000000000072 - av 0x0000000000000182 - -/-- 0x0000000000000045 - audio 0x0000000000000188 - mute 0x0000000000000071 - left 0x0000000000000069 - right 0x000000000000006A - up 0 x0000000000000067 - down 0x000000000000006C - mouseleft 0x0000000000000110 - mouseright 0x0000000000000111 - text 0x0000000000000096 - rew 0x00000000000000A8 - fwd 0x000000000000009F - rec 0x00000000000000A7 - play 0x00000000000000CF - prev 0x00000000000000A5 - next 0x00000000000000A3 - pause 0x0000000000000077 - stop 0x0000000000000080 - -end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt b/abs/core/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt deleted file mode 100755 index 5ac2227..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = chup -config = Up -end - -# Channel Down -begin -prog = mythtv -button = chdown -config = Down -end - -# General Left -begin -prog = mythtv -button = left -config = Left -end - -# General Right -begin -prog = mythtv -button = right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = volup -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = voldown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = fwd -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rew -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = next -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = prev -config = PgUp -end - -# Record -begin -prog = mythtv -button = rec -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = app -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = app -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = rew -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = fwd -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = next -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = prev -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = zoom -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = left -config = EventLeft -end - -begin -prog = xine -button = right -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = app -config = Menu -end - -begin -prog = xine -button = next -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = prev -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = volup -config = Volume+ -end - -begin -prog = xine -button = voldown -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = next -config = EventNext -end - -begin -prog = xine -button = prev -config = EventPrior -end - -begin -prog = xine -button = av -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy/preview.jpg b/abs/core/system-templates/templates/remotes/Cinergy/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf b/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf deleted file mode 100755 index 8458cfe..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf +++ /dev/null @@ -1,71 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.2(serial) on Fri Oct 14 16:29:58 2005 -# -# contributed by Sebastian Kraft -# -# brand: Terratec -# model no. of remote control: Cinergy 1400-T -# devices being controlled by this remote: -# - -begin remote - - name Terratec_Cinergy_1400-T - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9007 4495 - one 557 1683 - zero 557 555 - ptrail 546 - pre_data_bits 16 - pre_data 0x20D7 - gap 110968 - toggle_bit 0 - - - begin codes - 0 0x30CF - 1 0x40BF - 2 0xC03F - 3 0x20DF - 4 0xA05F - 5 0x609F - 6 0xE01F - 7 0x10EF - 8 0x906F - 9 0x50AF - fullscreen 0x18E7 - osd 0x708F - volumeup 0x38C7 - volumedown 0x7887 - channelup 0xD827 - channeldown 0xF807 - epg 0xF00F - av 0xD02F - power 0x807F - teletext 0xA857 - clock 0xE817 - mute 0xB847 - pause 0x02FD - play 0x32CD - record 0x1AE5 - rewind 0x2AD5 - stop 0x12ED - forward 0x3AC5 - up 0x08F7 - down 0x28D7 - left 0x8877 - right 0xC837 - info 0x6897 - ok 0x48B7 - tab 0x58A7 - audio 0x9867 - clock 0xE817 - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt b/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt deleted file mode 100755 index 8dd42c5..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = channelup -config = Up -end - -# Channel Down -begin -prog = mythtv -button = channeldown -config = Down -end - -# General Left -begin -prog = mythtv -button = left -config = Left -end - -# General Right -begin -prog = mythtv -button = right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = volumeup -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = volumedown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = ok -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = forward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = osd -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = epg -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = tab -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = teletext -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = osd -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = rewind -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = forward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = fullscreen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = left -config = EventLeft -end - -begin -prog = xine -button = right -config = EventRight -end - -begin -prog = xine -button = ok -config = EventSelect -end - -begin -prog = xine -button = epg -config = Menu -end - -begin -prog = xine -button = forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = volumeup -config = Volume+ -end - -begin -prog = xine -button = volumedown -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = channelup -config = EventNext -end - -begin -prog = xine -button = channeldown -config = EventPrior -end - -begin -prog = xine -button = info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg b/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg Binary files differdeleted file mode 100644 index b777ac9..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_1400/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf b/abs/core/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf deleted file mode 100755 index 168743b..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf +++ /dev/null @@ -1,72 +0,0 @@ -# -# this config file was generated -# using lirc-0.7.1pre2(serial) kantonix VDR -# -# contributed by Stefan Bernshausen -# -# brand: Terratec -# model no. of remote control: Cinergy T2 -# devices being controlled by this remote: -# - -begin remote - - name Terratec_Cinergy_T2 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9007 4495 - one 557 1683 - zero 557 555 - ptrail 546 - pre_data_bits 16 - pre_data 0x20D7 - gap 110968 - toggle_bit 0 - - - begin codes - 0 0x30CF - 1 0x40BF - 2 0xC03F - 3 0x20DF - 4 0xA05F - 5 0x609F - 6 0xE01F - 7 0x10EF - 8 0x906F - 9 0x50AF - Green 0x18E7 - Osd 0x708F - Volume+ 0x38C7 - Volume- 0x7887 - Ch+ 0xD827 - Ch- 0xF807 - Epg 0xF00F - Av 0xD02F - Power 0x807F - Txt 0xA857 - Red 0xE817 - Mute 0xB847 - Pause 0x02FD - Play 0x32CD - Record 0x1AE5 - Fback 0x2AD5 - Stop 0x12ED - Ffor 0x3AC5 - Up 0x08F7 - Down 0x28D7 - Left 0x8877 - Right 0xC837 - Info 0x6897 - Ok 0x48B7 - Blue 0x58A7 - Yellow 0x9867 - Red 0xE817 - Back 0xB04F - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt b/abs/core/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt deleted file mode 100755 index c4042fe..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = Ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = Left -config = Left -end - -# General Right -begin -prog = mythtv -button = Right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = Volume+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = Volume- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = Ffor -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Fback -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -config = R -end - -# Delete -begin -prog = mythtv -button = Red -config = D -end - -# OSD browse -begin -prog = mythtv -button = Osd -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Epg -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = Info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Green -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = Blue -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Osd -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Fback -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = Ffor -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = Ch+ -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Ch- -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = Blue -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = Play -config = Play -end - -begin -prog = xine -button = Stop -config = Stop -end - -begin -prog = xine -button = Stop -config = Quit -end - -begin -prog = xine -button = Pause -config = Pause -end - -begin -prog = xine -button = Up -config = EventUp -end - -begin -prog = xine -button = Down -config = EventDown -end - -begin -prog = xine -button = Left -config = EventLeft -end - -begin -prog = xine -button = Right -config = EventRight -end - -begin -prog = xine -button = Ok -config = EventSelect -end - -begin -prog = xine -button = Epg -config = Menu -end - -begin -prog = xine -button = Ffor -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = Fback -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = Volume+ -config = Volume+ -end - -begin -prog = xine -button = Volume- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = Stop -config = RootMenu -end - -begin -prog = xine -button = Ch+ -config = EventNext -end - -begin -prog = xine -button = Ch- -config = EventPrior -end - -begin -prog = xine -button = Info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Cinergy_T2/preview.jpg b/abs/core/system-templates/templates/remotes/Cinergy_T2/preview.jpg Binary files differdeleted file mode 100644 index b777ac9..0000000 --- a/abs/core/system-templates/templates/remotes/Cinergy_T2/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Compro/lircd-compro.conf b/abs/core/system-templates/templates/remotes/Compro/lircd-compro.conf deleted file mode 100755 index 41f2c7b..0000000 --- a/abs/core/system-templates/templates/remotes/Compro/lircd-compro.conf +++ /dev/null @@ -1,364 +0,0 @@ -begin remote - name linux-input-layer - bits 32 - begin codes - ESC 0x10001 - 1 0x10002 - 2 0x10003 - 3 0x10004 - 4 0x10005 - 5 0x10006 - 6 0x10007 - 7 0x10008 - 8 0x10009 - 9 0x1000a - 0 0x1000b - MINUS 0x1000c - EQUAL 0x1000d - BACKSPACE 0x1000e - TAB 0x1000f - Q 0x10010 - W 0x10011 - E 0x10012 - R 0x10013 - T 0x10014 - Y 0x10015 - U 0x10016 - I 0x10017 - O 0x10018 - P 0x10019 - LEFTBRACE 0x1001a - RIGHTBRACE 0x1001b - ENTER 0x1001c - LEFTCTRL 0x1001d - A 0x1001e - S 0x1001f - D 0x10020 - F 0x10021 - G 0x10022 - H 0x10023 - J 0x10024 - K 0x10025 - L 0x10026 - SEMICOLON 0x10027 - APOSTROPHE 0x10028 - GRAVE 0x10029 - LEFTSHIFT 0x1002a - BACKSLASH 0x1002b - Z 0x1002c - X 0x1002d - C 0x1002e - V 0x1002f - B 0x10030 - N 0x10031 - M 0x10032 - COMMA 0x10033 - DOT 0x10034 - SLASH 0x10035 - RIGHTSHIFT 0x10036 - KPASTERISK 0x10037 - LEFTALT 0x10038 - SPACE 0x10039 - CAPSLOCK 0x1003a - F1 0x1003b - F2 0x1003c - F3 0x1003d - F4 0x1003e - F5 0x1003f - F6 0x10040 - F7 0x10041 - F8 0x10042 - F9 0x10043 - F10 0x10044 - NUMLOCK 0x10045 - SCROLLLOCK 0x10046 - KP7 0x10047 - KP8 0x10048 - KP9 0x10049 - KPMINUS 0x1004a - KP4 0x1004b - KP5 0x1004c - KP6 0x1004d - KPPLUS 0x1004e - KP1 0x1004f - KP2 0x10050 - KP3 0x10051 - KP0 0x10052 - KPDOT 0x10053 - 103RD 0x10054 - F13 0x10055 - 102ND 0x10056 - F11 0x10057 - F12 0x10058 - F14 0x10059 - F15 0x1005a - F16 0x1005b - F17 0x1005c - F18 0x1005d - F19 0x1005e - F20 0x1005f - KPENTER 0x10060 - RIGHTCTRL 0x10061 - KPSLASH 0x10062 - SYSRQ 0x10063 - RIGHTALT 0x10064 - LINEFEED 0x10065 - HOME 0x10066 - UP 0x10067 - PAGEUP 0x10068 - LEFT 0x10069 - RIGHT 0x1006a - END 0x1006b - DOWN 0x1006c - PAGEDOWN 0x1006d - INSERT 0x1006e - DELETE 0x1006f - MACRO 0x10070 - MUTE 0x10071 - VOLUMEDOWN 0x10072 - VOLUMEUP 0x10073 - POWER 0x10074 - KPEQUAL 0x10075 - KPPLUSMINUS 0x10076 - PAUSE 0x10077 - F21 0x10078 - F22 0x10079 - F23 0x1007a - F24 0x1007b - KPCOMMA 0x1007c - LEFTMETA 0x1007d - RIGHTMETA 0x1007e - COMPOSE 0x1007f - STOP 0x10080 - AGAIN 0x10081 - PROPS 0x10082 - UNDO 0x10083 - FRONT 0x10084 - COPY 0x10085 - OPEN 0x10086 - PASTE 0x10087 - FIND 0x10088 - CUT 0x10089 - HELP 0x1008a - MENU 0x1008b - CALC 0x1008c - SETUP 0x1008d - SLEEP 0x1008e - WAKEUP 0x1008f - FILE 0x10090 - SENDFILE 0x10091 - DELETEFILE 0x10092 - XFER 0x10093 - PROG1 0x10094 - PROG2 0x10095 - WWW 0x10096 - MSDOS 0x10097 - COFFEE 0x10098 - DIRECTION 0x10099 - CYCLEWINDOWS 0x1009a - MAIL 0x1009b - BOOKMARKS 0x1009c - COMPUTER 0x1009d - BACK 0x1009e - FORWARD 0x1009f - CLOSECD 0x100a0 - EJECTCD 0x100a1 - EJECTCLOSECD 0x100a2 - NEXTSONG 0x100a3 - PLAYPAUSE 0x100a4 - PREVIOUSSONG 0x100a5 - STOPCD 0x100a6 - RECORD 0x100a7 - REWIND 0x100a8 - PHONE 0x100a9 - ISO 0x100aa - CONFIG 0x100ab - HOMEPAGE 0x100ac - REFRESH 0x100ad - EXIT 0x100ae - MOVE 0x100af - EDIT 0x100b0 - SCROLLUP 0x100b1 - SCROLLDOWN 0x100b2 - KPLEFTPAREN 0x100b3 - KPRIGHTPAREN 0x100b4 - INTL1 0x100b5 - INTL2 0x100b6 - INTL3 0x100b7 - INTL4 0x100b8 - INTL5 0x100b9 - INTL6 0x100ba - INTL7 0x100bb - INTL8 0x100bc - INTL9 0x100bd - LANG1 0x100be - LANG2 0x100bf - LANG3 0x100c0 - LANG4 0x100c1 - LANG5 0x100c2 - LANG6 0x100c3 - LANG7 0x100c4 - LANG8 0x100c5 - LANG9 0x100c6 - PLAYCD 0x100c8 - PAUSECD 0x100c9 - PROG3 0x100ca - PROG4 0x100cb - SUSPEND 0x100cd - CLOSE 0x100ce - PLAY 0x100cf - FASTFORWARD 0x100d0 - BASSBOOST 0x100d1 - PRINT 0x100d2 - HP 0x100d3 - CAMERA 0x100d4 - SOUND 0x100d5 - QUESTION 0x100d6 - EMAIL 0x100d7 - CHAT 0x100d8 - SEARCH 0x100d9 - CONNECT 0x100da - FINANCE 0x100db - SPORT 0x100dc - SHOP 0x100dd - ALTERASE 0x100de - CANCEL 0x100df - BRIGHTNESSDOWN 0x100e0 - BRIGHTNESSUP 0x100e1 - MEDIA 0x100e2 - UNKNOWN 0x100f0 - BTN_MISC 0x10100 - BTN_0 0x10100 - BTN_1 0x10101 - BTN_2 0x10102 - BTN_3 0x10103 - BTN_4 0x10104 - BTN_5 0x10105 - BTN_6 0x10106 - BTN_7 0x10107 - BTN_8 0x10108 - BTN_9 0x10109 - BTN_MOUSE 0x10110 - BTN_LEFT 0x10110 - BTN_RIGHT 0x10111 - BTN_MIDDLE 0x10112 - BTN_SIDE 0x10113 - BTN_EXTRA 0x10114 - BTN_FORWARD 0x10115 - BTN_BACK 0x10116 - BTN_TASK 0x10117 - BTN_JOYSTICK 0x10120 - BTN_TRIGGER 0x10120 - BTN_THUMB 0x10121 - BTN_THUMB2 0x10122 - BTN_TOP 0x10123 - BTN_TOP2 0x10124 - BTN_PINKIE 0x10125 - BTN_BASE 0x10126 - BTN_BASE2 0x10127 - BTN_BASE3 0x10128 - BTN_BASE4 0x10129 - BTN_BASE5 0x1012a - BTN_BASE6 0x1012b - BTN_DEAD 0x1012f - BTN_GAMEPAD 0x10130 - BTN_A 0x10130 - BTN_B 0x10131 - BTN_C 0x10132 - BTN_X 0x10133 - BTN_Y 0x10134 - BTN_Z 0x10135 - BTN_TL 0x10136 - BTN_TR 0x10137 - BTN_TL2 0x10138 - BTN_TR2 0x10139 - BTN_SELECT 0x1013a - BTN_START 0x1013b - BTN_MODE 0x1013c - BTN_THUMBL 0x1013d - BTN_THUMBR 0x1013e - BTN_DIGI 0x10140 - BTN_TOOL_PEN 0x10140 - BTN_TOOL_RUBBER 0x10141 - BTN_TOOL_BRUSH 0x10142 - BTN_TOOL_PENCIL 0x10143 - BTN_TOOL_AIRBRUSH 0x10144 - BTN_TOOL_FINGER 0x10145 - BTN_TOOL_MOUSE 0x10146 - BTN_TOOL_LENS 0x10147 - BTN_TOUCH 0x1014a - BTN_STYLUS 0x1014b - BTN_STYLUS2 0x1014c - BTN_WHEEL 0x10150 - BTN_GEAR_DOWN 0x10150 - BTN_GEAR_UP 0x10151 - OK 0x10160 - SELECT 0x10161 - GOTO 0x10162 - CLEAR 0x10163 - POWER2 0x10164 - OPTION 0x10165 - INFO 0x10166 - TIME 0x10167 - VENDOR 0x10168 - ARCHIVE 0x10169 - PROGRAM 0x1016a - CHANNEL 0x1016b - FAVORITES 0x1016c - EPG 0x1016d - PVR 0x1016e - MHP 0x1016f - LANGUAGE 0x10170 - TITLE 0x10171 - SUBTITLE 0x10172 - ANGLE 0x10173 - ZOOM 0x10174 - MODE 0x10175 - KEYBOARD 0x10176 - SCREEN 0x10177 - PC 0x10178 - TV 0x10179 - TV2 0x1017a - VCR 0x1017b - VCR2 0x1017c - SAT 0x1017d - SAT2 0x1017e - CD 0x1017f - TAPE 0x10180 - RADIO 0x10181 - TUNER 0x10182 - PLAYER 0x10183 - TEXT 0x10184 - DVD 0x10185 - AUX 0x10186 - MP3 0x10187 - AUDIO 0x10188 - VIDEO 0x10189 - DIRECTORY 0x1018a - LIST 0x1018b - MEMO 0x1018c - CALENDAR 0x1018d - RED 0x1018e - GREEN 0x1018f - YELLOW 0x10190 - BLUE 0x10191 - CHANNELUP 0x10192 - CHANNELDOWN 0x10193 - FIRST 0x10194 - LAST 0x10195 - AB 0x10196 - NEXT 0x10197 - RESTART 0x10198 - SLOW 0x10199 - SHUFFLE 0x1019a - BREAK 0x1019b - PREVIOUS 0x1019c - DIGITS 0x1019d - TEEN 0x1019e - TWEN 0x1019f - DEL_EOL 0x101c0 - DEL_EOS 0x101c1 - INS_LINE 0x101c2 - DEL_LINE 0x101c3 - end codes -end remote diff --git a/abs/core/system-templates/templates/remotes/Compro/lircrc-compro.txt b/abs/core/system-templates/templates/remotes/Compro/lircrc-compro.txt deleted file mode 100755 index 3a7fae8..0000000 --- a/abs/core/system-templates/templates/remotes/Compro/lircrc-compro.txt +++ /dev/null @@ -1,487 +0,0 @@ -begin - prog = mythtv - button = UP - config = Up -end - -begin - prog = mythtv - button = DOWN - config = Down -end - -begin - prog = mythtv - button = LEFT - config = Left -end - -begin - prog = mythtv - button = RIGHT - config = Right -end - -begin - prog = mythtv - button = DVD - config = Esc -end - -begin - prog = mythtv - button = Go -# Swap the PiP windows - config = N -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = TV - config = Esc -end - -begin - prog = mythtv - button = VIDEO - config = M -end - -# Below are keys used with the Hauppauge Grey remote - -begin - prog = mythtv -# This is the Red key -# We'll use it for "Delete" - button = Red - config = D -end - -begin - prog = mythtv -# This is the Green key -# We'll use it for "Information" - button = Green - config = I -end - -# Note the "repeat =" strings in the volume and channel. -# This means that if you hold down the key, every nth instance will be -# passed. This depends on your system, so you may want to increase or -# decrease this and see what happens. repeat = 1 is probably too -# fast. - -begin - prog = mythtv -# This is the Yellow key -# Use it as a volume key - button = VOLUMEDOWN - repeat = 3 - config = F10 -end - -begin - prog = mythtv -# This is the Blue key -# Use it as a volume key - button = VOLUMEUP - repeat = 3 - config = F11 -end - -begin - prog = mythtv - button = CHANNELUP -# This is the "up" on the central diamond - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = CHANNELDOWN -# This is the "down" on the central diamond - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = VOLUMEUP -# This is the "left" on the central diamond - repeat = 3 - config = Right -end - -begin - prog = mythtv - button = VOLUMEDOWN -# This is the "right" on the central diamond - repeat = 3 - config = Left -end - -begin - prog = mythtv -# Middle button on the diamond - button = OK - config = Return -end - -begin - prog = mythtv - button = MUTE - config = | -end - -begin - prog = mythtv -# Change focus for PiP (to change channel in the other window) - button = Blank - config = B -end - -begin - prog = mythtv -# Toggle PiP on/off - button = Full - config = V -end - -begin - prog = mythtv - button = REWIND - config = < -end - -begin - prog = mythtv - button = PLAY - config = P -end - -begin - prog = mythtv - button = FORWARD - config = > -end - -begin - prog = mythtv - button = RECORD - config = R -end - -begin - prog = mythtv -# Teletext - button = STOP - config = T -end - -begin - prog = mythtv - button = PLAYPAUSE - config = P -end - -begin - prog = mythtv - button = Replay -# Use for backwards commercial skip - config = Q -end - -begin - prog = mythtv - button = Skip -# Use for forward commercial skip - config = Z -end - -#MPlayer -begin - prog = mplayer - button = VIDEO - config = quit -end - -begin - prog = mplayer - button = SETUP - config = osd -end - -begin - prog = mplayer - button = REWIND - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = FOWARD - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = PREVIOUS - config = seek -60 - repeat = 1 -end - -begin - prog = mplayer - button = NEXT - config = seek +60 - repeat = 1 -end - -begin - prog = mplayer - button = PLAYPAUSE - config = pause -end - -begin - prog = mplayer - button = PLAYPAUSE - config = pause -end - -begin - prog = mplayer - button = VIDEO - config = quit -end - -begin - prog = mplayer - button = VOLUMEUP - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = VOLUMEDOWN - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = MUTE - config = mute -end -##XINE - - begin - prog = xine - button = PLAY - repeat = 3 - config = Play - end - - begin - prog = xine - button = STOP - repeat = 3 - config = Stop - end - - begin - prog = xine - button = BACK/EXIT - config = Quit - end - - begin - prog = xine - button = PAUSE - repeat = 3 - config = Pause - end - - begin - prog = xine - button = CH+ - repeat = 4 - config = EventUp - end - - begin - prog = xine - button = CH- - repeat = 4 - config = EventDown - end - - begin - prog = xine - button = VOL- - repeat = 4 - config = Volume- - end - - begin - prog = xine - button = VOL+ - repeat = 4 - config = Volume+ - end - - begin - prog = xine - button = OK - repeat = 0 - config = EventSelect - end - - begin - prog = xine - button = MENU - repeat = 0 - config = Menu - end - - #vol down - begin - prog = xine - button = YELLOW - repeat = 1 - config = EventLeft - end - - #vol up - begin - prog = xine - button = Red - repeat = 1 - config = EventRight - end - - begin - prog = xine - button = FFW - repeat = 2 - config = SeekRelative+30 - end - - begin - prog = xine - button = REW - repeat = 2 - config = SeekRelative-30 - end - - #ch up - begin - prog = xine - button = Green - repeat = 1 - config = SeekRelative+60 - end - - #ch down - begin - prog = xine - button = Blue - repeat = 1 - config = SeekRelative-60 - end - - #sleep - begin - prog = xine - button = GO - repeat = 1 - config = ZoomIn - end - - #display - begin - prog = xine - button = SKIP - repeat = 1 - config = ZoomOut - end - - #skip chapter forward - begin - prog = xine - button = SKIP - repeat = 1 - config = EventNext - end - - #skip chapter backward - begin - prog = xine - button = REPLAY - repeat = 1 - config = EventPrior - end diff --git a/abs/core/system-templates/templates/remotes/Compro/preview.jpg b/abs/core/system-templates/templates/remotes/Compro/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Compro/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf b/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf deleted file mode 100755 index 03a5f14..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf +++ /dev/null @@ -1,57 +0,0 @@ -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.8.1(dev/input) on Wed Jun 13 19:09:39 2007 -# -# contributed by -# -# brand: /tmp/lirc.conf -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - -name FlyVideo_2000 -bits 16 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -pre_data_bits 16 -pre_data 0x8001 -gap 208092 -toggle_bit 0 - - -begin codes - Air/catTV 0x0175 - Video 0x0189 - Audio 0x0188 - Power 0x0074 - AVSource 0x0182 - FullScreen 0x0174 - Stereo 0x0170 - Mute 0x0071 - Vol+ 0x0073 - Vol- 0x0072 - Ch+ 0x0192 - Ch- 0x0193 - Recall 0x0081 - Enter 0x001C - 1 0x0002 - 2 0x0003 - 3 0x0004 - 4 0x0005 - 5 0x0006 - 6 0x0007 - 7 0x0008 - 8 0x0009 - 9 0x000A - 0 0x000B - -end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt b/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt deleted file mode 100755 index 08fb7fb..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = Ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = Vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = Vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = Enter -config = Space -end - -# Play -begin -prog = mythtv -button = -config = Return -end - -# Stop -begin -prog = mythtv -button = -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = Recall -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = -config = osd -end - -# Pause playback -begin -prog = mplayer -button = -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FullScreen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = -config = Play -end - -begin -prog = xine -button = -config = Stop -end - -begin -prog = xine -button = -config = Quit -end - -begin -prog = xine -button = -config = Pause -end - -begin -prog = xine -button = Ch+ -config = EventUp -end - -begin -prog = xine -button = Ch- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = Enter -config = EventSelect -end - -begin -prog = xine -button = -config = Menu -end - -begin -prog = xine -button = -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = Vol+ -config = Volume+ -end - -begin -prog = xine -button = Vol- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_2000/preview.jpg b/abs/core/system-templates/templates/remotes/Flyvideo_2000/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_2000/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf b/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf deleted file mode 100755 index 8b4f23e..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf +++ /dev/null @@ -1,47 +0,0 @@ -# lircd.conf.Flyvideo_3000_devinput -# -# Lirc configuration file for the LifeView FlyVideo 3000 remote. -# -# Adapted from the standard linux input layer config file found at -# http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf -# The remote name and button names are consistent with lircd.conf.Flyvideo_3000. -# -# Created January 22, 2005 -# -# contributed by Jason Anderson (jasonofhoulton@hotmail.com) -# -# brand: Lifeview -# model no. of remote control: Flyvideo 3000 -# devices being controlled by this remote: -# - -begin remote - name Flyvideo_3000 - bits 32 - begin codes - air/catv 0x10182 - video 0x10189 - audio 0x10188 - power 0x10074 - av_source 0x100b0 - full_screen 0x10174 - stereo 0x100c0 - Mute 0x10071 - 1 0x1004f - 2 0x10050 - 3 0x10051 - vol+ 0x10073 - 4 0x1004b - 5 0x1004c - 6 0x1004d - vol- 0x10072 - 7 0x10047 - 8 0x10048 - 9 0x10049 - ch+ 0x10192 - recall 0x10081 - 0 0x10052 - enter 0x10060 - ch- 0x10193 - end codes -end remote diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt b/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt deleted file mode 100755 index 565c2d9..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = enter -config = Space -end - -# Play -begin -prog = mythtv -button = -config = Return -end - -# Stop -begin -prog = mythtv -button = -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = recall -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = -config = osd -end - -# Pause playback -begin -prog = mplayer -button = -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = full_Screen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = -config = Play -end - -begin -prog = xine -button = -config = Stop -end - -begin -prog = xine -button = -config = Quit -end - -begin -prog = xine -button = -config = Pause -end - -begin -prog = xine -button = ch+ -config = EventUp -end - -begin -prog = xine -button = ch- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = enter -config = EventSelect -end - -begin -prog = xine -button = -config = Menu -end - -begin -prog = xine -button = -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Flyvideo_3000/preview.jpg b/abs/core/system-templates/templates/remotes/Flyvideo_3000/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Flyvideo_3000/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Hercules/lircd-hercules.conf b/abs/core/system-templates/templates/remotes/Hercules/lircd-hercules.conf deleted file mode 100755 index a745dbb..0000000 --- a/abs/core/system-templates/templates/remotes/Hercules/lircd-hercules.conf +++ /dev/null @@ -1,61 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003 -# -# contributed by Dimitris Michail <dmichail|yahoo.com> -# -# brand: Hercules -# model no. of remote control: unknown -# devices being controlled by this remote: Hercules SmartTV Stereo -# -# Works with module lirc_i2c, reports PV951 IR - -begin remote - - name HERCULES_SMARTTV_STEREO - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 16 - pre_data 0x61D6 - gap 199964 - toggle_bit 0 - - - begin codes - POWER 0x00000000000048B7 - MUTE 0x000000000000C837 - PREVIEW 0x000000000000F00F - FULLSCREEN 0x00000000000038C7 - AV/TV 0x0000000000008877 - TELETEXT 0x00000000000008F7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - 0 0x00000000000000FF - SNAPSHOT 0x00000000000050AF - 100+ 0x000000000000E817 - CH+ 0x00000000000058A7 - CH- 0x0000000000007887 - VOL+ 0x000000000000D827 - VOL- 0x000000000000F807 - PAUSE 0x000000000000B04F - RECORD 0x000000000000708F - STOP 0x000000000000B847 - PLAY 0x0000000000009867 - TV_REPLAY 0x0000000000006897 - TIME_SHIFT 0x00000000000028D7 - SEEK_BACK 0x00000000000018E7 - SEEK_FWD 0x00000000000030CF - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Hercules/lircrc-hercules.txt b/abs/core/system-templates/templates/remotes/Hercules/lircrc-hercules.txt deleted file mode 100755 index c54873b..0000000 --- a/abs/core/system-templates/templates/remotes/Hercules/lircrc-hercules.txt +++ /dev/null @@ -1,475 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = CH+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = CH+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = CH- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VOL+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VOL- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = PLAY -config = Return -end - -# Stop -begin -prog = mythtv -button = STOP -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = POWER -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = PAUSE -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = SEEK_FWD -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = SEEK_BACK -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = RECORD -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = PREVIEW -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = FULLSCREEN -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Closed Captioning -begin -prog = mythtv -button = TELETEXT -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = PREVIEW -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = MUTE -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = SEEK_BACK -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = SEEK_FWD -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = STOP -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULLSCREEN -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = STOP -config = Quit -end - -begin -prog = xine -button = PAUSE -config = Pause -end - -begin -prog = xine -button = -config = EventUp -end - -begin -prog = xine -button = -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = PREVIEW -config = Menu -end - -begin -prog = xine -button = SEEK_FWD -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = SEEK_BACK -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL+ -config = Volume+ -end - -begin -prog = xine -button = VOL- -config = Volume- -end - -begin -prog = xine -button = MUTE -config = Mute -end - -begin -prog = xine -button = STOP -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = TELETEXT -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Hercules/preview.jpg b/abs/core/system-templates/templates/remotes/Hercules/preview.jpg Binary files differdeleted file mode 100644 index 8ffa652..0000000 --- a/abs/core/system-templates/templates/remotes/Hercules/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf b/abs/core/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf deleted file mode 100755 index a483e7f..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf +++ /dev/null @@ -1,80 +0,0 @@ -# -# this config file only works with a home-brew receiver!!! -# - -# -# this config file was automatically generated -# using lirc-0.8.1(default) on Sun Jul 1 22:59:56 2007 -# -# contributed by Bruce Schultz <brucejs71 at yahoo.com.au> -# -# brand: KWorld -# model no. of remote control: -# devices being controlled by this remote: DVB-T 220 tuner card -# - -begin remote - - name KWorld-DVBT-220 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9144 4394 - one 673 1578 - zero 673 453 - ptrail 666 - repeat 9146 2141 - pre_data_bits 16 - pre_data 0xDF - gap 108141 - toggle_bit 0 - - - begin codes - power 0x30CF - standby 0xB04F - sub_tv 0x7887 - preview 0xF807 - snap 0x38C7 - shut_down 0xB847 - 1 0x00FF - 2 0x807F - 3 0x40BF - 4 0xC03F - 5 0x20DF - 6 0xA05F - 7 0x609F - 8 0xE01F - 9 0x10EF - 0 0x50AF - numpad_up 0x906F - numpad_enter 0xD02F - mute 0x28D7 - stereo 0xA857 - source 0x6897 - zoom 0xE817 - min 0x18E7 - left 0x48B7 - right 0xC837 - up 0x08F7 - down 0x8877 - select 0x708F - timeshift 0x9867 - stop 0x58A7 - rec 0xD827 - scan_rev 0x02FD - scan_fwd 0x827D - play_pause 0x22DD - play_stop 0xA25D - chapter_rev 0x42BD - chapter_fwd 0xC23D - fun1 0x12ED - fun2 0x926D - fun3 0x52AD - fun4 0xD22D - end codes - -end remote - diff --git a/abs/core/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt b/abs/core/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt deleted file mode 100755 index 702d238..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt +++ /dev/null @@ -1,482 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = up -config = Up -end - -# Channel Down -begin -prog = mythtv -button = down -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = right -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = left -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = select -config = Space -end - -# Play -begin -prog = mythtv -button = play_pause -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = play_pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = scan_fwd -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = scan_rev -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = chapter_fwd -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = chapter_rev -config = PgUp -end - -# Record -begin -prog = mythtv -button = rec -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = fun1 -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = fun2 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = zoom -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = fun3 -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = source -config = osd -end - -# Pause playback -begin -prog = mplayer -button = play_pause -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = scan_rev -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = seek_fwd -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = chapter_fwd -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = chapter_rev -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = zoom -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play_pause -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = play_pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = select -config = EventSelect -end - -begin -prog = xine -button = preview -config = Menu -end - -begin -prog = xine -button = seek_fwd -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = seek_rev -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = right -config = Volume+ -end - -begin -prog = xine -button = left -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = chapter_fwd -config = EventNext -end - -begin -prog = xine -button = chapter_rev -config = EventPrior -end - -begin -prog = xine -button = source -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Kworld_220/preview.jpg b/abs/core/system-templates/templates/remotes/Kworld_220/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_220/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf b/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf deleted file mode 100755 index 425e107..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf +++ /dev/null @@ -1,71 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni <pnis at coder.hu> -# Modified by Daniel Foote <freefoote at dview dot net> to -# work with remote that came with DVB-T card. -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name KWorld_DVB-T - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - ch- 0x0000000000007887 - 7 0x000000000000E01F - preview 0x00000000000038C7 - zoom 0x00000000000018E7 - 3 0x000000000000C03F - 1 0x000000000000807F - epg 0x000000000000D02F - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - 5 0x000000000000A05F - 9 0x000000000000906F - reset 0x000000000000A857 - turnleft 0x000000000000E817 - 6 0x000000000000609F - 0 0x00000000000050AF - power 0x00000000000048B7 - scan 0x00000000000030CF - 2 0x00000000000040BF - mute 0x00000000000008F7 - snap 0x000000000000C837 - 4 0x00000000000020DF - turnup 0x00000000000000FF - 8 0x00000000000010EF - backward 0x0000000000008877 - source 0x000000000000F00F - forward 0x0000000000009867 - pip 0x00000000000028D7 - ch- 0x000000000000E817 - play 0x0000000000006897 - ch+ 0x00000000000058A7 - stop 0x000000000000B04F - function- 0x00000000000020DF - pause 0x000000000000708F - function+ 0x00000000000030CF - rec 0x000000000000B847 - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt b/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt deleted file mode 100755 index 70272b7..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = forward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = backward -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = function+ -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = function- -config = PgUp -end - -# Record -begin -prog = mythtv -button = rec -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = preview -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = epg -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = source -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = zoom -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = reset -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = pip -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = snap -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = epg -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = backward -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = forward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = function+ -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = function- -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = zoom -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = turnup -config = EventUp -end - -begin -prog = xine -button = -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = epg -config = Menu -end - -begin -prog = xine -button = forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = backward -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = function+ -config = EventNext -end - -begin -prog = xine -button = function- -config = EventPrior -end - -begin -prog = xine -button = source -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Kworld_DVBT/preview.jpg b/abs/core/system-templates/templates/remotes/Kworld_DVBT/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_DVBT/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf b/abs/core/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf deleted file mode 100755 index 5817bfd..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf +++ /dev/null @@ -1,70 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni <pnis at coder.hu> -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name kworld-878 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - power 0x0000000000007887 - source 0x000000000000E01F - scan 0x00000000000038C7 - mute 0x00000000000018E7 - tv/fm 0x000000000000C03F - 1 0x000000000000807F - 2 0x000000000000D02F - 3 0x000000000000D827 - fm_scan+ 0x000000000000F807 - 4 0x000000000000A05F - 5 0x000000000000906F - 6 0x000000000000A857 - fm_scan- 0x000000000000E817 - 7 0x000000000000609F - 8 0x00000000000050AF - 9 0x00000000000048B7 - fm_freq+ 0x00000000000030CF - 0 0x00000000000040BF - + 0x00000000000008F7 - recall 0x000000000000C837 - fm-freq- 0x00000000000020DF - record 0x00000000000000FF - stop 0x00000000000010EF - play 0x0000000000008877 - minimze 0x000000000000F00F - ch+ 0x000000000000F807 - zoom 0x0000000000009867 - vol- 0x00000000000028D7 - ch- 0x000000000000E817 - vol+ 0x0000000000006897 - snapshot 0x00000000000058A7 - mts 0x000000000000B04F - function- 0x00000000000020DF - function 0x000000000000708F - function+ 0x00000000000030CF - reset 0x000000000000B847 - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt b/abs/core/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt deleted file mode 100755 index e1ca297..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt +++ /dev/null @@ -1,482 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = snapshot -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = function+ -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = function- -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = function -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = scan -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = minimze -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = recall -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = scan -config = osd -end - -# Pause playback -begin -prog = mplayer -button = snapshot -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = -config = seek +1 -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = function- -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = function+ -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = zoom -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = snapshot -config = Pause -end - -begin -prog = xine -button = -config = EventUp -end - -begin -prog = xine -button = -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = source -config = Menu -end - -begin -prog = xine -button = function+ -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = function- -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = + -config = EventNext -end - -begin -prog = xine -button = recall -config = EventPrior -end - -begin -prog = xine -button = reset -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Kworld_tv878/preview.jpg b/abs/core/system-templates/templates/remotes/Kworld_tv878/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Kworld_tv878/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf b/abs/core/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf deleted file mode 100755 index 2df0bc6..0000000 --- a/abs/core/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf +++ /dev/null @@ -1,48 +0,0 @@ -begin remote - name Lifeview_trio - bits 16 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - gap 199996 - pre_data_bits 16 - pre_data 0x8001 - - begin codes - fullscreen 0x0174 - power 0x0074 - one 0x0002 - two 0x0003 - three 0x0004 - four 0x0005 - five 0x0006 - six 0x0007 - seven 0x0008 - eight 0x0009 - nine 0x000A - zero 0x000B - recall 0x0081 - mute 0x0071 - tv/radio 0x0181 - sap 0x0170 - ch+ 0x0192 - vol- 0x0072 - enter 0x001C - vol+ 0x0073 - ch- 0x0193 - pip 0x0175 - source 0x0182 - record/pause 0x00A7 - timeshift/pause 0x0077 - rewind 0x009E - play/pause 0x00A4 - forward 0x009F - back 0x019C - stop 0x0080 - next 0x0197 - blank 0x0173 - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt b/abs/core/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt deleted file mode 100755 index 845742a..0000000 --- a/abs/core/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = ch+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = ch- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = enter -config = Space -end - -# Play -begin -prog = mythtv -button = play/pause -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = play/pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = forward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = next -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = back -config = PgUp -end - -# Record -begin -prog = mythtv -button = record/pause -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = source -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = blank -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = zero -config = 0 -end - -begin -prog = mythtv -button = one -config = 1 -end - -begin -prog = mythtv -button = two -config = 2 -end - -begin -prog = mythtv -button = three -config = 3 -end - -begin -prog = mythtv -button = four -config = 4 -end - -begin -prog = mythtv -button = five -config = 5 -end - -begin -prog = mythtv -button = six -config = 6 -end - -begin -prog = mythtv -button = seven -config = 7 -end - -begin -prog = mythtv -button = eight -config = 8 -end - -begin -prog = mythtv -button = nine -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = recall -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = pip -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = source -config = osd -end - -# Pause playback -begin -prog = mplayer -button = play/pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = rewind -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = forward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = next -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = back -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = fullscreen -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play/pause -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = play/pause -config = Pause -end - -begin -prog = xine -button = ch+ -config = EventUp -end - -begin -prog = xine -button = ch- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = enter -config = EventSelect -end - -begin -prog = xine -button = source -config = Menu -end - -begin -prog = xine -button = forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = next -config = EventNext -end - -begin -prog = xine -button = back -config = EventPrior -end - -begin -prog = xine -button = blank -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Lifeview/preview.jpg b/abs/core/system-templates/templates/remotes/Lifeview/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Lifeview/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf b/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf deleted file mode 100755 index f897a64..0000000 --- a/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf +++ /dev/null @@ -1,126 +0,0 @@ -# -# this config file was hand crafted for -# lirc-0.8.0(atiusb) on Sun June 11 22:49:23 2006 -# -# contributed by Ted Schipper <t.schipper@tsux.org> -# -# brand: Medion 8802 -# Remote P/N: 20029724 -# Receiver P/N: 20024123 -# model no. of remote control: Medion RF remote -# devices being controlled by this remote: Medion 8802 Multimedia Home Entertainment Design Center -# - -begin remote - - name Medion_8802 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227999 - min_repeat 5 - toggle_bit 0 - - - begin codes - Line_TV 0x719C - Line_TV 0xF11C - Rec_TV 0x6D98 - Rec_TV 0xED18 - On/Standby 0xD702 - Photo 0x5A85 - Photo 0xDA05 - Music 0x5B86 - Music 0xDB06 - Guide 0x0631 - Guide 0x86B1 - DVD_Menu 0x5984 - DVD_Menu 0xD904 - Video 0x022D - Video 0x82AD - Text 0x6B96 - Text 0xEB16 - RED/Audio 0x0732 - RED/Audio 0x87B2 - YELLOW/Angle 0x0934 - YELLOW/Angle 0x89B4 - BLUE/Title 0x0A35 - BLUE/Title 0x8AB5 - GREEN/Subtitle 0x0833 - GREEN/Subtitle 0x88B3 - Vol+ 0x5E89 - Vol+ 0xDE09 - Vol- 0x5D88 - Vol- 0xDD08 - Up 0x6F9A - Up 0xEF1A - Down 0x77A2 - Down 0xF722 - Left 0x729D - Left 0xF21D - Right 0x749F - Right 0xF41F - Ok 0x739E - Ok 0xF31E - Mute 0x5580 - Mute 0xD500 - Ch+ 0x608B - Ch+ 0xE00B - Ch- 0x618C - Ch- 0xE10C - 1 0x628D - 1 0xE20D - 2 0x638E - 2 0xE30E - 3 0x648F - 3 0xE40F - 4 0x6590 - 4 0xE510 - 5 0x6691 - 5 0xE611 - 6 0x6792 - 6 0xE712 - 7 0x6893 - 7 0xE813 - 8 0x6994 - 8 0xE994 - 9 0x6A95 - 9 0xEA15 - * 0x0C37 - * 0x8CB7 - 0 0x6C97 - 0 0xEC17 - # 0x0D38 - # 0x8DB8 - Back 0x75A0 - Back 0xF520 - Info 0x042F - Info 0x84AF - Select 0x709B - Select 0xF01B - Rewind 0x79A4 - Rewind 0xF924 - Play 0x7AA5 - Play 0xFA25 - Fast_Forward 0x7BA6 - Fast_Forward 0xFB26 - Pause 0x7EA9 - Pause 0xFE29 - Start 0x76A1 - Start 0xF621 - End 0x78A3 - End 0xF823 - Stop 0x7DA8 - Stop 0xFD28 - Record 0x7CA7 - Record 0xFC27 - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt b/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt deleted file mode 100755 index fb91d72..0000000 --- a/abs/core/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt +++ /dev/null @@ -1,487 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = Ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = Left -config = Left -end - -# General Right -begin -prog = mythtv -button = Right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = Vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = Vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# OK/Select -begin -prog = mythtv -button = Select -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = On/Standby -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Fast_Forward -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Rewind -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -config = R -end - -# Delete -begin -prog = mythtv -button = RED/Audio -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Guide -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = Info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = back -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Guide -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Fast_Forward -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = Rewind -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = Right -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Left -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = Play -config = Play -end - -begin -prog = xine -button = Stop -config = Stop -end - -begin -prog = xine -button = Stop -config = Quit -end - -begin -prog = xine -button = Pause -config = Pause -end - -begin -prog = xine -button = Up -config = EventUp -end - -begin -prog = xine -button = Down -config = EventDown -end - -begin -prog = xine -button = Left -config = EventLeft -end - -begin -prog = xine -button = Right -config = EventRight -end - -begin -prog = xine -button = Select -config = EventSelect -end - -begin -prog = xine -button = Ok -config = EventSelect -end - -begin -prog = xine -button = Guide -config = Menu -end - -begin -prog = xine -button = Fast_Forward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = Rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = Vol+ -config = Volume+ -end - -begin -prog = xine -button = Vol- -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = Stop -config = RootMenu -end - -begin -prog = xine -button = Ch+ -config = EventNext -end - -begin -prog = xine -button = Ch- -config = EventPrior -end - -begin -prog = xine -button = Info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Medion_X10_8802/preview.jpg b/abs/core/system-templates/templates/remotes/Medion_X10_8802/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Medion_X10_8802/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/MythVantage-one/lircd.conf b/abs/core/system-templates/templates/remotes/MythVantage-one/lircd.conf deleted file mode 100644 index b76d32c..0000000 --- a/abs/core/system-templates/templates/remotes/MythVantage-one/lircd.conf +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/MythVantage-one/lircrc b/abs/core/system-templates/templates/remotes/MythVantage-one/lircrc deleted file mode 100755 index 2663c63..0000000 --- a/abs/core/system-templates/templates/remotes/MythVantage-one/lircrc +++ /dev/null @@ -1,857 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 5 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -repeat = 5 -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Return -repeat = 5 -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -repeat = 5 -end - -begin -prog = mythtv -button = EXIT -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = Space -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = p -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -repeat = 5 -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = r -repeat = 5 -end - -begin -prog = mythtv -# rewind -button = << -config = Home -repeat = 5 -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -repeat = 5 -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = S -repeat = 5 -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/system-templates/templates/remotes/MythVantage-one/preview.jpg b/abs/core/system-templates/templates/remotes/MythVantage-one/preview.jpg Binary files differdeleted file mode 100644 index e2af610..0000000 --- a/abs/core/system-templates/templates/remotes/MythVantage-one/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Nexus/lircd-nexus.conf b/abs/core/system-templates/templates/remotes/Nexus/lircd-nexus.conf deleted file mode 100755 index 229db28..0000000 --- a/abs/core/system-templates/templates/remotes/Nexus/lircd-nexus.conf +++ /dev/null @@ -1,73 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 -# -# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at -# members of linux user group Vorarlberg www.lugv.at -# -# for ir remote controler from Hauppauge WinTV Nexus-S -# most of the keys are supported -# -# brand: Hauppauge -# model no. of remote control: WinTV Nexus-S -# devices being controlled by this remote: -# - -begin remote - - name Hauppauge_WinTV_Nexus-S - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 944 828 - zero 944 828 - plead 980 - gap 113932 - min_repeat 1 - toggle_bit 2 - - - begin codes - Up 0x0000000000001794 - Down 0x0000000000001795 - Left 0x0000000000001796 - Right 0x0000000000001797 - Power 0x00000000000017BD - Ok 0x00000000000017A5 - Menu 0x000000000000178D - Back 0x000000000000179F - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - 0 0x0000000000001780 - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Play 0x00000000000017B5 - Pause 0x00000000000017B0 - Stop 0x00000000000017B6 - Record 0x00000000000017B7 - FastFwd 0x00000000000017B4 - FastRwd 0x00000000000017B2 - Channel+ 0x00000000000017A0 - Channel- 0x00000000000017A1 - Volume+ 0x0000000000001790 - Volume- 0x0000000000001791 - Mute 0x000000000000178F - Timers 0x000000000000178A - Recordings 0x000000000000178E - Back 0x000000000000179F - Record 0x00000000000017B7 - end codes - -end remote - diff --git a/abs/core/system-templates/templates/remotes/Nexus/lircrc-nexus.txt b/abs/core/system-templates/templates/remotes/Nexus/lircrc-nexus.txt deleted file mode 100755 index 169da14..0000000 --- a/abs/core/system-templates/templates/remotes/Nexus/lircrc-nexus.txt +++ /dev/null @@ -1,459 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the new grey Hauppauge remote -# - - - -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -begin -prog = mythtv -button = Up -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = Down -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = Left -repeat = 3 -config = Left -end - -begin -prog = mythtv -button = Right -repeat = 3 -config = Right -end - -# Channel Up -begin -prog = mythtv -button = Channel+ -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Channel- -repeat = 3 -config = Down -end - -# OKSelect -begin -prog = mythtv -button = Ok -repeat = 3 -config = Space -end - -# Play -begin -prog = mythtv -button = Play -repeat = 3 -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -repeat = 3 -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = Back -repeat = 3 -config = Esc -end - -# Power Off/Exit -begin -prog = irxevent -button = Power -repeat = 3 -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -repeat = 3 -config = | -end - -# Fast forward -begin -prog = mythtv -button = FastFwd -repeat = 3 -config = < -end - -# Rewind -begin -prog = mythtv -button = FastRwd -repeat = 3 -config = > -end - -# Record -begin -prog = mythtv -button = Record -repeat = 3 -config = R -end - -# Delete -begin -prog = mythtv -button = Red -repeat = 3 -config = D -end - -# Decrease play speed -begin -prog = mythtv -button = Green -repeat = 3 -config = U -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu -repeat = 3 -config = M -end - -# Scroll up -begin -prog = mythtv -button = Volume+ -repeat = 3 -config = F11 -end - -# Scroll down -begin -prog = mythtv -button = Volume- -repeat = 3 -config = F10 -end - -# double speed watch -begin -prog = mythtv -button = Yellow -repeat = 3 -config = J -end - -# Bring up Time stretch -begin -prog = mythtv -button = Blue -repeat = 3 -config = A -end - -# Numbers 0-9 -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - - - -###### MPlayer lirc setup -# Show OSD -begin -prog = mplayer -button = Menu -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = Play -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Stop -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = Mute -repeat = 3 -config = mute -end - -begin -prog = mplayer -button = Left -repeat = 3 -config = seek -10 -end - -# Seek back 10 seconds -begin -prog = mplayer -button = FastRwd -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = Right -repeat = 3 -config = seek +30 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FastFwd -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - - - - -###### Xine lirc setup -begin -prog = xine -button = Play -repeat = 3 -config = Play -end - -begin -prog = xine -button = Stop -repeat = 3 -config = Stop -end - -begin -prog = xine -button = Back -repeat = 3 -config = Quit -end - -begin -prog = xine -button = Pause -repeat = 3 -config = Pause -end - -begin -prog = xine -button = Up -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = Down -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = Left -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = Right -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = Ok -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = FastFwd -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = FastRwd -repeat = 3 -config = SpeedSlower -end - -begin -prog = xine -button = Volume+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = Volume- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = Mute -repeat = 3 -config = Mute -end - -begin -prog = xine -button = Menu -repeat = 3 -config = RootMenu -end - - diff --git a/abs/core/system-templates/templates/remotes/Nexus/preview.jpg b/abs/core/system-templates/templates/remotes/Nexus/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Nexus/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf b/abs/core/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf deleted file mode 100755 index 504718b..0000000 --- a/abs/core/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf +++ /dev/null @@ -1,53 +0,0 @@ -begin remote - name one4all_9910 - bits 24 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - header 4074 3901 - one 584 1909 - zero 584 909 - ptrail 589 - gap 64326 - - begin codes - 1 0x7318CE - 2 0x7328CD - 3 0x7338CC - 4 0x7348CB - 5 0x7358CA - 6 0x7368C9 - 7 0x7378C8 - 8 0x7388C7 - 9 0x7398C6 - 0 0x7308CF - enter 0x7F480B - tvvid 0x7A385C - rew 0x71D8E2 - play 0x7158EA - fwd 0x72D8D2 - rec 0x7178E8 - pause 0x7198E6 - frew 0x72C8D3 - stop 0x71F8E0 - ffwd 0x72D8D2 - pip 0x71B8E4 - swap 0x7C383C - fav 0x72D8D2 - ch- 0x72C8D3 - ch+ 0x72D8D2 - prev 0x7278D8 - left 0x7568A9 - up 0x7598A6 - down 0x7588A7 - right 0x7578A8 - select 0x7F480B - menu 0x7088F7 - guide 0x71A8E5 - exit 0x7068F9 - info 0x73C8C3 - power 0x72A8D5 - - end codes - -end remote
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt b/abs/core/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt deleted file mode 100755 index ea40c6a..0000000 --- a/abs/core/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = left -config = Left -end - -# General Right -begin -prog = mythtv -button = right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = select -config = Space -end - -# Play -begin -prog = mythtv -button = play -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = exit -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = pause -config = P -end - -# Mute -begin -prog = mythtv -button = -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = fwd -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = rew -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = ffwd -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = frew -config = PgUp -end - -# Record -begin -prog = mythtv -button = rec -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = menu -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = info -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = prev -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = pip -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = menu -config = osd -end - -# Pause playback -begin -prog = mplayer -button = pause -config = pause -end - -# Mute -begin -prog = mplayer -button = -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = rew -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = fwd -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = ffwd -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = frew -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = stop -config = Quit -end - -begin -prog = xine -button = pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = left -config = EventLeft -end - -begin -prog = xine -button = right -config = EventRight -end - -begin -prog = xine -button = enter -config = EventSelect -end - -begin -prog = xine -button = menu -config = Menu -end - -begin -prog = xine -button = ffwd -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = frew -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = ch+ -config = Volume+ -end - -begin -prog = xine -button = ch- -config = Volume- -end - -begin -prog = xine -button = -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = prev -config = EventPrior -end - -begin -prog = xine -button = info -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/One4All_9910/preview.jpg b/abs/core/system-templates/templates/remotes/One4All_9910/preview.jpg Binary files differdeleted file mode 100644 index 827cb9a..0000000 --- a/abs/core/system-templates/templates/remotes/One4All_9910/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Provideo/lircd-provideo.conf b/abs/core/system-templates/templates/remotes/Provideo/lircd-provideo.conf deleted file mode 100755 index d20ad85..0000000 --- a/abs/core/system-templates/templates/remotes/Provideo/lircd-provideo.conf +++ /dev/null @@ -1,52 +0,0 @@ -begin remote - - name PV951 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9067 4482 - one 597 1650 - zero 597 529 - ptrail 584 - repeat 9068 2232 - pre_data_bits 16 - pre_data 0x61D6 - gap 107983 - repeat_bit 0 - - begin codes - power 0x00000000000048B7 - air/cbl 0x000000000000D02F - pc/tv 0x0000000000008877 - source 0x000000000000F00F - mts 0x000000000000C837 - mute 0x00000000000008F7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - 0 0x00000000000000FF - +100 0x00000000000050AF - ch_rtn 0x000000000000E817 - ch+ 0x00000000000058A7 - ch- 0x0000000000007887 - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - func 0x0000000000009867 - ttx 0x000000000000B04F - pg+ 0x000000000000708F - pg- 0x000000000000B847 - cc 0x0000000000006897 - sync 0x00000000000028D7 - ch+- 0x00000000000018E7 - autoscan 0x00000000000030CF - end codes - -end remote diff --git a/abs/core/system-templates/templates/remotes/Provideo/lircrc-provideo.txt b/abs/core/system-templates/templates/remotes/Provideo/lircrc-provideo.txt deleted file mode 100755 index 90972b6..0000000 --- a/abs/core/system-templates/templates/remotes/Provideo/lircrc-provideo.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ch+ -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ch- -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = pg+ -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = pg- -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = -config = Space -end - -# Play -begin -prog = mythtv -button = -config = Return -end - -# Stop -begin -prog = mythtv -button = -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = func -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = ch_rtn -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = cc -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = func -config = osd -end - -# Pause playback -begin -prog = mplayer -button = -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = -config = Play -end - -begin -prog = xine -button = -config = Stop -end - -begin -prog = xine -button = -config = Quit -end - -begin -prog = xine -button = -config = Pause -end - -begin -prog = xine -button = ch+ -config = EventUp -end - -begin -prog = xine -button = ch- -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = -config = EventSelect -end - -begin -prog = xine -button = -config = Menu -end - -begin -prog = xine -button = pg+ -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = pg- -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = ch_rtn -config = EventPrior -end - -begin -prog = xine -button = ttx -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Provideo/preview.jpg b/abs/core/system-templates/templates/remotes/Provideo/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Provideo/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Sasem/lircd-sasem.conf b/abs/core/system-templates/templates/remotes/Sasem/lircd-sasem.conf deleted file mode 100755 index 25d6521..0000000 --- a/abs/core/system-templates/templates/remotes/Sasem/lircd-sasem.conf +++ /dev/null @@ -1,81 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 -# -# contributed by Oliver Stabel (oliver.stabel@gmx.de) -# -# brand: Sasem OnAir -# model no. of remote control: n/a -# devices being controlled by this remote: -# This IR came with the Dign HV5 HTPC case, manufactured -# by Uneed in Korea (www.iuneed.com). -# AFAIK the case is called Ahanix HV5 in the US. -# The IR/VFD device is originally manufactured by Sasem, -# and sold as OnAir Remocon-V (?looks different from -# mine but should be the same?) -# - -begin remote - - name sasem - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0x0C807F - post_data_bits 24 - post_data 0x000000 - gap 196000 - toggle_bit 0 - - - begin codes - 1 0x08F7 - 2 0x09F6 - 3 0x0AF5 - 4 0x10EF - 5 0x11EE - 6 0x12ED - 7 0x18E7 - 8 0x19E6 - 9 0x1AE5 - start 0x40BF - 0 0x41BE - full_down 0x06F9 - vol- 0x0FF0 - vol+ 0x0EF1 - esc 0x05FA - up 0x0BF4 - close 0x07F8 - left 0x03FC - enter 0x13EC - right 0x1BE4 - prev 0x0CF3 - down 0x43BC - next 0x01FE - mute 0x0DF2 - step 0x04FB - play_pause 0x49B6 - stop 0x48B7 - winamp 0x1EE1 - media_player 0x15EA - hdtv 0x17E8 - cd_player 0x16E9 - win_dvd 0x44BB - power_dvd 0x14EB - internet 0x46B9 - email 0x47B8 - a 0x45BA - b 0x1DE2 - c 0x1CE3 - d 0x1FE0 - eject 0x02FD - power 0x00FF - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/Sasem/lircrc-sasem.txt b/abs/core/system-templates/templates/remotes/Sasem/lircrc-sasem.txt deleted file mode 100755 index 9d73415..0000000 --- a/abs/core/system-templates/templates/remotes/Sasem/lircrc-sasem.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = up -config = Up -end - -# Channel Down -begin -prog = mythtv -button = down -config = Down -end - -# General Left -begin -prog = mythtv -button = left -config = Left -end - -# General Right -begin -prog = mythtv -button = right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = vol+ -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = vol- -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = enter -config = Space -end - -# Play -begin -prog = mythtv -button = play_pause -config = Return -end - -# Stop -begin -prog = mythtv -button = stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = esc -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = power -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = play_pause -config = P -end - -# Mute -begin -prog = mythtv -button = mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = next -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = prev -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = -config = PgUp -end - -# Record -begin -prog = mythtv -button = -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = -config = osd -end - -# Pause playback -begin -prog = mplayer -button = play_pause -config = pause -end - -# Mute -begin -prog = mplayer -button = mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = prev -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = next -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = full_down -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = play_pause -config = Play -end - -begin -prog = xine -button = stop -config = Stop -end - -begin -prog = xine -button = esc -config = Quit -end - -begin -prog = xine -button = play_pause -config = Pause -end - -begin -prog = xine -button = up -config = EventUp -end - -begin -prog = xine -button = down -config = EventDown -end - -begin -prog = xine -button = left -config = EventLeft -end - -begin -prog = xine -button = right -config = EventRight -end - -begin -prog = xine -button = enter -config = EventSelect -end - -begin -prog = xine -button = -config = Menu -end - -begin -prog = xine -button = next -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = prev -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = vol+ -config = Volume+ -end - -begin -prog = xine -button = vol- -config = Volume- -end - -begin -prog = xine -button = mute -config = Mute -end - -begin -prog = xine -button = stop -config = RootMenu -end - -begin -prog = xine -button = -config = EventNext -end - -begin -prog = xine -button = -config = EventPrior -end - -begin -prog = xine -button = -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Sasem/preview.jpg b/abs/core/system-templates/templates/remotes/Sasem/preview.jpg Binary files differdeleted file mode 100644 index ec2b595..0000000 --- a/abs/core/system-templates/templates/remotes/Sasem/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/Tekram/lircd-tekram.conf b/abs/core/system-templates/templates/remotes/Tekram/lircd-tekram.conf deleted file mode 100755 index 90ae8f8..0000000 --- a/abs/core/system-templates/templates/remotes/Tekram/lircd-tekram.conf +++ /dev/null @@ -1,48 +0,0 @@ -# -# This is for the remote that Tekram bundles with its M230 card (Mach64) -# Commands from the remote are hardware-decoded -# -# contributed by Froenchenko Leonid <lfroen@galileo.co.il> -# -# brand: Tekram M230 (ATI Mach64) -# supported devices: This remote control comes with TV Tuner cards from -# Tekram based on ATI 264VT (btt829) -# - -begin remote - name tekram_m230 - bits 8 - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - RECALL 0x0A - ENTER 0x17 - POWER 0x1C - SOURCE 0x15 - PC_VID 0x12 - STILL 0x11 - TTX 0x0F - FAV 0x13 - MUTE 0x10 - VOL_UP 0x1A - VOL_DN 0x1E - CH_UP 0x1B - CH_DN 0x1F - PLAY 0x0D - STOP 0x0E - REW 0x1D - FFW 0x19 - ADD_ER 0x16 - FUNC 0x14 - F_PLUS 0x18 - F_MINUS 0x0C - end codes -end remote diff --git a/abs/core/system-templates/templates/remotes/Tekram/lircrc-tekram.txt b/abs/core/system-templates/templates/remotes/Tekram/lircrc-tekram.txt deleted file mode 100755 index 6226f3d..0000000 --- a/abs/core/system-templates/templates/remotes/Tekram/lircrc-tekram.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = CH_UP -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH_DN -config = Down -end - -# General Left -begin -prog = mythtv -button = -config = Left -end - -# General Right -begin -prog = mythtv -button = -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = CH_UP -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = CH_DN -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VOL_UP -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VOL_DN -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = ENTER -config = Space -end - -# Play -begin -prog = mythtv -button = PLAY -config = Return -end - -# Stop -begin -prog = mythtv -button = STOP -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = POWER -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = STILL -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = FFW -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = REW -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = F_PLUS -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = F_MINUS -config = PgUp -end - -# Record -begin -prog = mythtv -button = FUNC -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = SOURCE -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = FAV -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = PC_VID -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = RECALL -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = TTX -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = FAV -config = osd -end - -# Pause playback -begin -prog = mplayer -button = STILL -config = pause -end - -# Mute -begin -prog = mplayer -button = MUTE -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = REW -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FFW -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = STOP -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = F_PLUS -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = F_MINUS -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = SOURCE -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = STOP -config = Quit -end - -begin -prog = xine -button = STILL -config = Pause -end - -begin -prog = xine -button = CH_UP -config = EventUp -end - -begin -prog = xine -button = CH_DN -config = EventDown -end - -begin -prog = xine -button = -config = EventLeft -end - -begin -prog = xine -button = -config = EventRight -end - -begin -prog = xine -button = ENTER -config = EventSelect -end - -begin -prog = xine -button = SOURCE -config = Menu -end - -begin -prog = xine -button = FFW -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -config = Volume+ -end - -begin -prog = xine -button = VOL_DN -config = Volume- -end - -begin -prog = xine -button = MUTE -config = Mute -end - -begin -prog = xine -button = STOP -config = RootMenu -end - -begin -prog = xine -button = F_PLUS -config = EventNext -end - -begin -prog = xine -button = F_MINUS -config = EventPrior -end - -begin -prog = xine -button = TTX -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/Tekram/preview.jpg b/abs/core/system-templates/templates/remotes/Tekram/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/Tekram/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core/system-templates/templates/remotes/atiusb/lircd.conf.atiusb deleted file mode 100644 index 4953bf2..0000000 --- a/abs/core/system-templates/templates/remotes/atiusb/lircd.conf.atiusb +++ /dev/null @@ -1,1259 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 -# -# contributed by Paul Miller <pmiller9@users.sourceforge.net> -# -# brand: ATI Remote Wonder -# model no. of remote control: 5000015900A -# devices being controlled by this remote: ATI USB Receiver -# -# CHANNEL CODES -# To change your channel, hold the hand button down until the -# LED begins to blink. Then enter the channel number -# (1 through 16) and press the hand again. -# -# NOTE!! The lirc_atiusb driver now removes the channel code -# from key-codes (by default). This effectively outputs codes -# for remote channel 1. You can change this behavior by -# loading the module with unique=1. Type `modinfo lirc_atiusb` -# for details. - -begin remote - - name ATIUSB_5000015900A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139944 - toggle_bit 0 - - - begin codes - A 0x000000000000F500 - B 0x000000000000F601 - C 0x0000000000000E19 - D 0x000000000000101B - E 0x0000000000001621 - F 0x0000000000001823 - TV 0x000000000000F803 - DVD 0x000000000000F904 - WEB 0x000000000000FA05 - BOOK 0x000000000000FB06 - HAND 0x000000000000FC07 - POWER 0x000000000000F702 - MOUSE_LEFT_BTN 0x0000000000006D78 - MOUSE_RIGHT_BTN 0x000000000000717C - MOUSE_UP 0x0000000000006772 - MOUSE_DOWN 0x0000000000006B76 - MOUSE_LEFT 0x0000000000006C77 - MOUSE_RIGHT 0x0000000000006B76 - VOL_UP 0x000000000000FD08 - VOL_DOWN 0x000000000000FE09 - MUTE 0x000000000000FF0A - CH_UP 0x000000000000000B - CH_DOWN 0x000000000000010C - 1 0x000000000000020D - 2 0x000000000000030E - 3 0x000000000000040F - 4 0x0000000000000510 - 5 0x0000000000000611 - 6 0x0000000000000712 - 7 0x0000000000000813 - 8 0x0000000000000914 - 9 0x0000000000000A15 - 0 0x0000000000000C17 - LIST 0x0000000000000B16 - CHECK 0x0000000000000D18 - UP 0x0000000000000F1A - DOWN 0x0000000000001722 - LEFT 0x000000000000121D - RIGHT 0x000000000000141F - OK 0x000000000000131E - TIMER 0x000000000000111C - MAX 0x0000000000001520 - REWIND 0x0000000000001924 - PLAY 0x0000000000001A25 - FFWD 0x0000000000001B26 - REC 0x0000000000001C27 - STOP 0x0000000000001D28 - PAUSE 0x0000000000001E29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 -# -# contributed by Jason Piterak -# -# brand: ATI -# model no. of remote control: 5000022000 -# -# devices being controlled by this remote: -# MythTV PVR using knopmyth by Cecil and Dale at -# http://mysettopbox.tv -# Key map names are as per ATI's website: -# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html -# Feel free to change them as you see fit :-) -# -# NOTE: There are 16 channels for this remote; this file only -# supports one channel. See the GATOS project for information -# on how to change the channel. Not tested. Unknown channel. -# -# also reported by Jeffrey Barnhill to work with model 5000023600 while -# the dedicated section below did not work - -begin remote - - name ATIUSB_5000022000 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0000 - gap 139891 - toggle_bit 0 - - - begin codes - a 0x000000000000C500 - b 0x000000000000C601 - power 0x000000000000C702 - tv 0x000000000000C803 - dvd 0x000000000000C904 - web 0x000000000000CA05 - media_library 0x000000000000CB06 - drag 0x000000000000CC07 - mouse-button_left 0x0000000000003D78 - mouse-button_right 0x000000000000417C - mouse-up 0x0000000000003772 - mouse-down 0x0000000000003873 - mouse-left 0x0000000000003570 - mouse-right 0x0000000000003671 - mouse-left_up 0x0000000000003974 - mouse-right_up 0x0000000000003A75 - mouse-left_down 0x0000000000003C77 - mouse-right_down 0x0000000000003B76 - vol-up 0x000000000000CD08 - vol-down 0x000000000000CE09 - mute 0x000000000000CF0A - chan-up 0x000000000000D00B - chan-down 0x000000000000D10C - 1 0x000000000000D20D - 2 0x000000000000D30E - 3 0x000000000000D40F - 4 0x000000000000D510 - 5 0x000000000000D611 - 6 0x000000000000D712 - 7 0x000000000000D813 - 8 0x000000000000D914 - 9 0x000000000000DA15 - 0 0x000000000000DC17 - dvd-root_menu 0x000000000000DB16 - launch_setup 0x000000000000DD18 - c 0x000000000000DE19 - d 0x000000000000E01B - tv_on_demand 0x000000000000E11C - max_window 0x000000000000E520 - cursor-up 0x000000000000DF1A - cursor-down 0x000000000000E722 - cursor-left 0x000000000000E21D - cursor-right 0x000000000000E41F - ok 0x000000000000E31E - e 0x000000000000E621 - f 0x000000000000E823 - rewind 0x000000000000E924 - play 0x000000000000EA25 - fast_forward 0x000000000000EB26 - record 0x000000000000EC27 - stop 0x000000000000ED28 - pause 0x000000000000EE29 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 -# -# contributed by Jurgen Kramer -# -# brand: ATI -# model no. of remote control: 5000023600 -# devices being controlled by this remote: MythTV 0.14 -# -# USB ID: 0bc7:0004 -# - -begin remote - - name ATIUSB_5000023600 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227972 - min_repeat 4 - toggle_bit 0 - - - begin codes - 1 0x000000000000920D - 2 0x000000000000930E - 3 0x000000000000940F - 4 0x0000000000009510 - 5 0x0000000000009611 - 6 0x0000000000009712 - 7 0x0000000000009813 - 8 0x0000000000009914 - 9 0x0000000000009A15 - a 0x0000000000008500 - b 0x0000000000008601 - power 0x0000000000008702 - tv 0x0000000000008803 - dvd 0x0000000000008904 - web 0x0000000000008A05 - media_library 0x0000000000008B06 - drag 0x0000000000008C07 - 0 0x0000000000009C17 - c 0x0000000000009E19 - d 0x000000000000A01B - mute 0x0000000000008F0A - tv_on_demand 0x000000000000A11C - max_window 0x000000000000A520 - e 0x000000000000A621 - f 0x000000000000A823 - ok 0x000000000000A31E - left 0x000000000000A21D - right 0x000000000000A41F - up 0x0000000000009F1A - down 0x000000000000A722 - rewind 0x000000000000A924 - play 0x000000000000AA25 - forward 0x000000000000AB26 - record 0x000000000000AC27 - stop 0x000000000000AD28 - pause 0x000000000000AE29 - mouse_button_left 0x000000000000FD78 - mouse_button_right 0x000000000000017C - vol-down 0x0000000000008E09 - vol-up 0x0000000000008D08 - chan-down 0x000000000000910C - chan-up 0x000000000000900B - mouse-up 0x000000000000F772 - mouse-down 0x000000000000F873 - mouse-left 0x000000000000F570 - mouse-right 0x000000000000F671 - mouse-left_up 0x000000000000F974 - mouse-left_down 0x000000000000FC77 - mouse-right_up 0x000000000000FA75 - mouse-right_down 0x000000000000FB76 - dvd-root_menu 0x0000000000009B16 - launch_setup 0x0000000000009D18 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 -# -# contributed by Raphaël Doursenaud (rdoursenaud@free.fr) -# -# brand: Sapphire (ATI) -# model no. of remote control: 5000023600 -# devices being controlled by this remote: xmms, tvtime -# - -begin remote - - name SAPPHIRE_ATIUSB_5000023600 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227990 - toggle_bit 0 - - - begin codes - 1 0x00000014E20D0000 - 2 0x00000014E30E0000 - 3 0x00000014E40F0000 - 4 0x00000014E5100000 - 5 0x00000014E6110000 - 6 0x00000014E7120000 - 7 0x00000014E8130000 - 8 0x00000014E9140000 - 9 0x00000014EA150000 - a 0x00000014D5000000 - b 0x00000014D6010000 - power 0x00000014D7020000 - tv 0x00000014D8030000 - dvd 0x00000014D9040000 - web 0x00000014DA050000 - media_library 0x00000014DB060000 - drag 0x00000014DC070000 - 0 0x00000014EC170000 - c 0x00000014EE190000 - d 0x00000014F01B0000 - mute 0x00000014DF0A0000 - tv_on_demand 0x00000014F11C0000 - max_window 0x00000014F5200000 - e 0x00000014F6210000 - f 0x00000014F8230000 - ok 0x00000014F31E0000 - left 0x00000014F21D0000 - right 0x00000014F41F0000 - up 0x00000014EF1A0000 - down 0x00000014F7220000 - rewind 0x00000014F9240000 - play 0x00000014FA250000 - forward 0x00000014FB260000 - record 0x00000014FC270000 - stop 0x00000014FD280000 - pause 0x00000014FE290000 - mouse_button_left 0x000000144D780000 - mouse_button_right 0x00000014517C0000 - vol-down 0x00000014DE090000 - vol-up 0x00000014DD080000 - chan-down 0x00000014E10C0000 - chan-up 0x00000014E00B0000 - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-left_up 0x0000001449740000 - mouse-left_down 0x000000144C770000 - mouse-right_up 0x000000144A750000 - mouse-right_down 0x000000144B760000 - dvd-root_menu 0x00000014EB160000 - launch_setup 0x00000014ED180000 - end codes - -end remote - - -# lircd.conf for X-10 Lola remote -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 -# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc -# -# -# brand: X-10 Lola -# model no. of remote control: UR89A -# devices being controlled by this remote: mythtv -# - -begin remote - - name X-10_Lola - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219972 - toggle_bit 0 - - - begin codes - up 0x000000000000600B - down 0x000000000000610C - left 0x0000000000005D08 - right 0x0000000000005E09 - M 0x0000000000005F0A - 1 0x000000000000620D - 2 0x000000000000630E - 3 0x000000000000640F - 4 0x0000000000006510 - 5 0x0000000000006611 - 6 0x0000000000006712 - 7 0x0000000000006813 - 8 0x0000000000006914 - 9 0x0000000000006A15 - 0 0x0000000000006C17 - a-d 0x0000000000006B16 - a-b 0x0000000000006D18 - pageup 0x000000000000711C - pagedown 0x0000000000007520 - T 0x000000000000832E - E 0x000000000000842F - F 0x0000000000005C07 - S 0x0000000000008530 - scan- 0x000000000000802B - rew 0x0000000000007924 - play 0x0000000000007A25 - ff 0x0000000000007B26 - scan+ 0x0000000000007F2A - rec 0x0000000000007C27 - stop 0x0000000000007D28 - pause 0x0000000000007E29 - playlist 0x0000000000005601 - playing 0x000000000000822D - enter 0x000000000000731E - eu 0x0000000000006F1A - ed 0x0000000000007722 - el 0x000000000000721D - er 0x000000000000741F - alb 0x0000000000006E19 - art 0x000000000000701B - gen 0x0000000000007621 - trk 0x0000000000007823 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 -# -# contributed by Julien Damon -# -# brand: microapp6in1 -# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 -# distributed in France -# model no. of remote control: 4184(UR86E) -# devices being controlled by this remote: - -# -# sold by Pearl as Q-Sonic Master Remote 6in1 PC -# - -begin remote - - name microapp6in1 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203993 - toggle_bit 0 - - - begin codes - num_1 0x00000020EE11820D - num_2 0x00000020EE11420D - num_3 0x00000020EE11C20D - num_4 0x00000020EE11220D - num_5 0x00000020EE11A20D - num_6 0x00000020EE11620D - num_7 0x00000020EE11E20D - num_8 0x00000020EE11120D - num_9 0x00000020EE11920D - num_0 0x00000020EE11020D - AV 0x00000020EE11BA05 - ok 0x00000020EE11520D - up 0x00000020EE11D50A - left 0x00000020EE11D20D - right 0x00000020EE11D10E - down 0x00000020EE11D30C - exit 0x00000020EE11C906 - menu 0x00000020EE11B609 - mute 0x00000020EE11A00F - vol+ 0x00000020EE11600F - vol- 0x00000020EE11E00F - ch+ 0x00000020EE11400F - ch- 0x00000020EE11C00F - hand 0x00000014307B0000 - skip_left 0x00000020EE113A05 - skip_right 0x00000020EE11D807 - play 0x00000020EE11B00F - backward 0x00000020EE113807 - forward 0x00000020EE11B807 - pause 0x00000020EE11720D - stop 0x00000020EE11FF00 - record 0x00000020EE11700F - clic_left 0x000000142D780000 - clic_right 0x00000014317C0000 - mouse_up 0x0000001427720000 - mouse_down 0x0000001428730000 - mouse_right 0x0000001426710000 - mouse_left 0x0000001425700000 - mouse_up_right 0x000000142A750000 - mouse_down_right 0x000000142B760000 - mouse_up_left 0x0000001429740000 - mouse_down_left 0x000000142C770000 - power 0x00000020EE11F00F -# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC - leftbtn_up 0x000000142e790000 - rightbtn_up 0x00000014327d0000 - pc 0x00000020ee11d40b - - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 -# -# contributed by Martin Tomasek <mtd@centrum.cz> -# -# brand: ATI Remote Wonder -# model no. of remote control: -# devices being controlled by this remote: ATI USB Receiver (X10). -# -# * remote is set to channel 1, driver reports channel 16. don't know -# which is true. - -# -# P: Vendor=0bc7 ProdID=0004 Rev= 1.00 -# S: Manufacturer=X10 Wireless Technology Inc -# S: Product=USB Receiver -# - -begin remote - - name atiusb_ch1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227933 - toggle_bit 0 - - - begin codes - A 0x000000000000D500 - B 0x000000000000D601 - C 0x000000000000EE19 - D 0x000000000000F01B - E 0x000000000000F621 - F 0x000000000000F823 - POWER 0x000000000000D702 - TV 0x000000000000D803 - DVD 0x000000000000D904 - WEB 0x000000000000DA05 - BOOK 0x000000000000DB06 - HAND 0x000000000000DC07 - MOUSE_LEFT_BTN 0x0000000000004D78 - MOUSE_RIGHT_BTN 0x000000000000517C - MOUSE_LEFT 0x0000000000004570 - MOUSE_RIGHT 0x0000000000004671 - MOUSE_UP 0x0000000000004772 - MOUSE_DOWN 0x0000000000004873 - VOL_UP 0x000000000000DD08 - VOL_DOWN 0x000000000000DE09 - MUTE 0x000000000000DF0A - CH_UP 0x000000000000E00B - CH_DOWN 0x000000000000E10C - 1 0x000000000000E20D - 2 0x000000000000E30E - 3 0x000000000000E40F - 4 0x000000000000E510 - 5 0x000000000000E611 - 6 0x000000000000E712 - 7 0x000000000000E813 - 8 0x000000000000E914 - 9 0x000000000000EA15 - 0 0x000000000000EC17 - LIST 0x000000000000EB16 - CHECK 0x000000000000ED18 - UP 0x000000000000EF1A - DOWN 0x000000000000F722 - LEFT 0x000000000000F21D - RIGHT 0x000000000000F41F - OK 0x000000000000F31E - TIMER 0x000000000000F11C - MAXIMIZE 0x000000000000F520 - REW 0x000000000000F924 - FFWD 0x000000000000FB26 - PLAY 0x000000000000FA25 - STOP 0x000000000000FD28 - RECORD 0x000000000000FC27 - PAUSE 0x000000000000FE29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 -# -# contributed by Phil Speights -# -# brand: nvidia -# model no. of remote control: UR88A -# devices being controlled by this remote: nvidia personal cinema -# - -begin remote - - name ATIUSB_UR88A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 243948 - toggle_bit 0 - - - begin codes - mouse-up 0x4A75 - mouse-right_up 0x4A75 - mouse-right 0x4671 - mouse-right_down 0x4B76 - mouse-down 0x4B76 - mouse-left_down 0x4873 - mouse-left 0x4C77 - mouse-left_up 0x4772 - esc 0xDF0A - mouse-button_left 0x4D78 - mouse-button_right 0x517C - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - 0 0xEC17 - stop 0xFD28 - play 0xFA25 - fastfoward 0xFB26 - rewind 0xF924 - pause 0xFE29 - record 0xFC27 - previous 0xF621 - next 0xF823 - up 0xEF1A - down 0xF722 - right 0xF41F - left 0xF21D - web 0xDC07 - music 0xDB06 - photo 0xDA05 - dvd/vcd 0xD904 - dvr 0xD803 - mute 0xD500 - playlist 0xD601 - chsurf 0xD702 - dvdmenu 0xEE19 - txt 0xEB16 - snapshots 0xED18 - setup 0xF01B - audio 0xF11C - slow 0xF520 - ok 0xF31E - vol+ 0xDE09 - vol- 0xDD08 - chan- 0xE10C - chan+ 0xE00B - zoom 0xFF2A - angle 0x002B - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 -# -# contributed by Dirk Aust -# -# brand: Medion, Made by X10, China -# Remote P/N: 20016398 -# Receiver P/N: 20016397 -# -# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC - -begin remote - - name Medion - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139873 - toggle_bit 0 - - - begin codes - TV 0x012C - VCR 0x022D - DVD 0xD904 - MUSIC 0xDB06 - RADIO 0x032E - PHOTO 0xDA05 - TV_PREVIEW 0x042F - CHANNEL_LIST 0x0530 - SETUP 0xF01B - VIDEO_DESKTOP 0x0631 - CHAN+ 0xE00B - VOL- 0xDD08 - MUTE 0xD500 - VOL+ 0xDE09 - CHAN- 0xE10C - RED 0x0732 - GREEN 0x0833 - YELLOW 0x0934 - BLUE 0x0A35 - TXT 0xEB16 - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - TV/RADIO 0xF11C - 0 0xEC17 - DELETE 0xF520 - RENAME 0x0B36 - SNAPSHOT 0xED18 - UP 0xEF1A - LEFT 0xF21D - OK 0xF31E - RIGHT 0xF41F - DOWN 0xF722 - ACQ_IMAGE 0x0C37 - EDIT_IMAGE 0x0D38 - REW 0xF924 - PLAY 0xFA25 - FFW 0xFB26 - RECORD 0xFC27 - STOP 0xFD28 - PAUSE 0xFE29 - PREV 0xF621 - FULL 0x0E39 - NEXT 0xF823 - DVD_MENU 0xEE19 - DVD_AUDIO 0x0F3A - POWER 0xD702 - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 -# -# contributed by Steffen <starv-lirc@juniks.org> -# -# brand: ATI Sapphire Remote Bob II USB -# model no. of remote control: 5000024400 -# devices being controlled by this remote: ASUS Digimatrix MythTV PVR -# - -begin remote - - name 5000024400 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x0 - post_data_bits 16 - post_data 0x0 - gap 299851 - toggle_bit 0 - - - begin codes - aux1 0x023F - aux2 0x023F - aux3 0x023F - aux4 0x023F - leftmouse 0x02A9 - rightmouse 0x02AA - a 0x0278 - b 0x0279 - power 0x020C - dvd 0x0238 - tv 0x0239 - help 0x02BE - pc 0x023F - resize 0x02D5 - hand 0x02D0 - ati 0x028E - vol-up 0x0210 - vol-down 0x0211 - mute 0x020D - chan-up 0x0220 - chan-down 0x0221 - mouse-up 0x013F - mouse-down 0x013F - mouse-left 0x013F - mouse-right 0x013F - 1 0x0201 - 2 0x0202 - 3 0x0203 - 4 0x0204 - 5 0x0205 - 6 0x0206 - 7 0x0207 - 8 0x0208 - 9 0x0209 - 0 0x0200 - list 0x0254 - check 0x0282 - info 0x02F9 - timer 0x0296 - up 0x0258 - left 0x025A - right 0x025B - down 0x0259 - ok 0x025C - c 0x017A - d 0x027B - play 0x022C - e 0x027C - f 0x027D - rewind 0x0229 - rec 0x0237 - stop 0x0231 - pause 0x0230 - ffwd 0x0228 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 -# -# contributed by -# -# brand: Niveus -# model no. of remote control: -# devices being controlled by this remote: Niveus X10 -# - -begin remote - - name Niveus_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203974 - toggle_bit 0 - - - begin codes - power 0x00000020EE11F00F - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-up-left 0x0000001449740000 - mouse-up-right 0x000000144A750000 - mouse-down-left 0x000000144C770000 - mouse-down-right 0x000000144B760000 - mouse-left-click 0x000000144D780000 - mouse-right-click 0x00000014517C0000 - mouse-drag 0x00000014507B0000 - vol- 0x00000020EE01E00F - vol+ 0x00000020EE81600F - ch- 0x00000020EEE1C00F - ch+ 0x00000020EE61400F - mute 0x00000020EEC1A00F - 1 0x00000020EEA1820D - 2 0x00000020EE61420D - 3 0x00000020EEE1C20D - 4 0x00000020EE41220D - 5 0x00000020EEC1A20D - 6 0x00000020EE81620D - 7 0x00000020EE01E20D - 8 0x00000020EE31120D - 9 0x00000020EEB1920D - ent 0x00000020EE71520D - 0 0x00000020EE21020D - a-b 0x00000020EED1BA05 - a 0x00000020EE513A05 - b 0x00000020EEF1D807 - c 0x00000020EEF1D609 - d 0x00000020EEF1D906 - menu 0x00000020EED1B609 - exit 0x00000020EEE1C906 - up 0x00000020EEF1D50A - down 0x00000020EEF1D30C - left 0x00000020EEF1D20D - right 0x00000020EEF1D10E - ok 0x00000020EE71520D - rew 0x00000020EE513807 - play 0x00000020EED1B00F - ff 0x00000020EED1B807 - rec 0x00000020EE11FF00 - stop 0x00000020EE91700F - pause 0x00000020EE91720D - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005 -# -# contributed by -# -# brand: Medion -# model no. of remote control: MD1 NBC remote -# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb -# - -begin remote - - name Medion_MD1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219994 - min_repeat 27 - toggle_bit 0 - - - begin codes - Power 0x000000000000D702 - TV 0x000000000000012C - Video 0x00000000000082AD - CD/DVD 0x000000000000D904 - Teletext 0x0000000000006B96 - Audio 0x000000000000DB06 - Radio 0x00000000000083AE - Page 0x0000000000000631 - Photo 0x0000000000005A85 - Info 0x000000000000042F - Menu 0x0000000000006E99 - Back 0x000000000000F520 - Wheel_Up 0x000000000000CDF8 - Wheel_Down 0x000000000000C7F2 - Wheel_Left 0x000000000000F21D - Wheel_Right 0x000000000000749F - Wheel_Click 0x000000000000F31E - Vol+ 0x000000000000DE09 - Vol- 0x0000000000005D88 - Mute 0x000000000000D500 - Program+ 0x000000000000608B - Program- 0x000000000000E10C - Prog_Switch 0x000000000000719C - Select 0x000000000000F01B - Red 0x00000000000087B2 - Green 0x0000000000000833 - Yellow 0x00000000000089B4 - Blue 0x0000000000000A35 - Stop 0x0000000000007DA8 - Pause 0x000000000000FE29 - Play 0x0000000000007AA5 - Skip_Left 0x000000000000F621 - Camera 0x0000000000006D98 - Skip_Right 0x000000000000F823 - Fast_Reverse 0x00000000000079A4 - Fast_Forward 0x000000000000FB26 - 1 0x000000000000628D - 2 0x000000000000E30E - 3 0x000000000000648F - 4 0x000000000000E510 - 5 0x0000000000006691 - 6 0x000000000000E712 - 7 0x0000000000006893 - 8 0x000000000000E914 - 9 0x0000000000006A95 - 0 0x000000000000EC17 - Record 0x000000000000FC27 - end codes - -end remote - - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 -# -# contributed by a_matteur -# -# brand: MEDION X10 RF -# model no. of remote control: remote P/N:20014752, receiver P/N:20014751 -# devices being controlled by this remote: -# - -begin remote - - name MEDION_X10_RF - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 235923 - toggle_bit 0 - - - begin codes - tv 0x012C - vcr 0x022D - dvd 0x0904 - music 0x0B06 - radio 0x032E - photo 0x0A05 - tvpreview 0x042F - channellist 0x0530 - setup 0x001B - videodesktop 0x0631 - ch+ 0x000B - ch- 0x010C - vol+ 0x0E09 - vol- 0x0D08 - mute 0x0500 - red 0x0732 - green 0x0833 - yellow 0x0934 - blue 0x0A35 - txt 0x0B16 - 0 0x0C17 - 1 0x020D - 2 0x030E - 3 0x040F - 4 0x0510 - 5 0x0611 - 6 0x0712 - 7 0x0813 - 8 0x0914 - 9 0x0A15 - tvradio 0x011C - delete 0x0520 - rename 0x0B36 - snapshot 0x0D18 - up 0x0F1A - down 0x0722 - left 0x021D - right 0x041F - ok 0x031E - acquireimage 0x0C37 - editimage 0x0D38 - play 0x0A25 - pause 0x0E29 - stop 0x0D28 - forward 0x0B26 - rewind 0x0924 - next 0x0823 - prev 0x0621 - record 0x0C27 - fullscreen 0x0E39 - dvdmenu 0x0E19 - dvdaudio 0x0F3A - power 0x0702 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 -# -# contributed by: Peter J. Weyers <lirc(a)usr-local.de> -# -# brand: MEDION / ATI -# model no. of remote control: 40005927 -# devices being controlled by this remote: -# -# This is an USB attached reciever wich works by radio, not by IR. It is -# most probably a relabeled ATI X10 device and sold together with the -# Medion Notebook MD41300. It works with the lirc_atiusb driver while the -# ati_remote module is NOT(!) loaded - -begin remote - - name MEDION_40005927 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227972 - toggle_bit 0 - - - begin codes - TV_DVD 0x1481AC0000 - VIDEO 0x1482AD0000 - PHOTO 0x1459840000 - MUSIC 0x145B860000 - PC 0x1483AE0000 - MUTE 0x1455800000 - OK 0x14739E0000 - UP 0x146F9A0000 - DOWN 0x1477A20000 - LEFT 0x14729D0000 - RIGHT 0x14749F0000 - CH+ 0x145E890000 - CH- 0x145D880000 - VOL+ 0x14608B0000 - VOL- 0x14618C0000 - PLAY_PAUSE 0x147AA50000 - RECORD 0x147CA70000 - STOP 0x147DA80000 - FRWND 0x1479A40000 - FFWD 0x147BA60000 - PREV 0x1476A10000 - NEXT 0x1478A30000 - 1 0x14628D0000 - 2 0x14638E0000 - 3 0x14648F0000 - 4 0x1465900000 - 5 0x1466910000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x1469940000 - 9 0x146A950000 - 0 0x146C970000 - RC 0x1484AF0000 - Screen_Symbol 0x146B960000 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006 -# -# contributed by -# -# brand: Medion USB Remote Control X10 -# model no. of remote control: 40009936 -# devices being controlled by this remote: -# - -begin remote - - name Medion_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 219969 - toggle_bit 0 - - - begin codes - off 0x14D7020000 - tv 0x14012C0000 - video 0x1482AD0000 - dvd 0x14D9040000 - vt 0x146B960000 - audio 0x14DB060000 - radio 0x1483AE0000 - book 0x1406310000 - photo 0x145A850000 - info 0x14042F0000 - 0 0x146C970000 - 1 0x14E20D0000 - 2 0x14638E0000 - 3 0x14E40F0000 - 4 0x1465900000 - 5 0x14E6110000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x14E9140000 - 9 0x146A950000 - ok 0x14F31E0000 - up 0x14CDF80000 - down 0x1446710000 - left 0x14F21D0000 - right 0x14749F0000 - menu 0x14EE190000 - back 0x1475A00000 - red 0x1407320000 - green 0x1488B30000 - yellow 0x1409340000 - blue 0x148AB50000 - mute 0x14D5000000 - ch+ 0x14608B0000 - ch- 0x14E10C0000 - vol+ 0x145E890000 - vol- 0x14DD080000 - switch 0x14719C0000 - stop 0x14FD280000 - pause 0x147EA90000 - play 0x14FA250000 - reward 0x1476A10000 - forward 0x14F8230000 - skipr 0x1479A40000 - skipf 0x14FB260000 - rec 0x147CA70000 - end codes - -end remote - diff --git a/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy deleted file mode 100644 index 1fd689f..0000000 --- a/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy +++ /dev/null @@ -1,63 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001 -# -# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> -# -# brand: BESTBUY -# model: Easy TV (BT848) -# supported devices: -# - -begin remote - - name BESTBUY - bits 5 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 3 - pre_data 0x0 -# gap 149990 - gap 199989 - toggle_bit 2 - - - begin codes - 0 0x0000000000000000 - 1 0x0000000000000001 - 2 0x0000000000000002 - 3 0x0000000000000003 - 4 0x0000000000000004 - 5 0x0000000000000005 - 6 0x0000000000000006 - 7 0x0000000000000007 - 8 0x0000000000000008 - 9 0x0000000000000009 - TV 0x000000000000001C - POWER 0x0000000000000012 - VIDEO 0x0000000000000011 - PREVIEW 0x000000000000000F - MUTE 0x0000000000000013 - SCAN 0x0000000000000010 - CHANNEL_UP 0x000000000000001A - CHANNEL_DOWN 0x000000000000001E - VOL_UP 0x000000000000001B - VOL_DOWN 0x000000000000001F - LOOP 0x000000000000000A - 100 0x0000000000000017 - ZOOM 0x000000000000000D - RECORD 0x000000000000000E - STOP 0x000000000000001D - PLAY 0x0000000000000019 - FREEZE 0x0000000000000016 - COLOR 0x0000000000000014 - LEFT 0x0000000000000018 - RIGHT 0x000000000000000C - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy2 deleted file mode 100644 index 77e87e3..0000000 --- a/abs/core/system-templates/templates/remotes/bestbuy/lircd.conf.bestbuy2 +++ /dev/null @@ -1,59 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001 -# -# contributed by Miguel Angel Alvarez <maacruz@navegalia.com> -# -# brand: BESTBUY -# model: EASY TV (BT878) -# supported devices: -# - -begin remote - - name BESTBUY - bits 7 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 1 - pre_data 0x0 - gap 199981 - toggle_bit 0 - - - begin codes - TV/FM 0x0000000000000043 - SCAN 0x0000000000000047 - ZOOM 0x000000000000005C - POWER 0x000000000000005E - 1 0x0000000000000041 - 2 0x000000000000004B - 3 0x000000000000005B - VOL+ 0x000000000000005F - 4 0x0000000000000045 - 5 0x0000000000000049 - 6 0x0000000000000055 - VOL- 0x0000000000000057 - 7 0x0000000000000046 - 8 0x000000000000004A - 9 0x0000000000000052 - CH+ 0x0000000000000056 - 0 0x0000000000000042 - LOOP 0x0000000000000053 - +100 0x0000000000000050 - CH- 0x0000000000000054 - SOURCE 0x0000000000000040 - MUTE 0x0000000000000058 - - 0x0000000000000044 - FUNCTION 0x000000000000004E - + 0x000000000000004C - RESET 0x000000000000004D - FREEZE 0x000000000000004F - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy deleted file mode 100644 index e57d11f..0000000 --- a/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CHANNEL_UP -MOVE_OUT * CHANNEL_DOWN - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * ZOOM -BUTTON2_TOGGLE * RECORD -BUTTON3_TOGGLE * STOP - -BUTTON1_CLICK * POWER -BUTTON2_CLICK * TV -BUTTON3_CLICK * SCAN - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy2 deleted file mode 100644 index c515058..0000000 --- a/abs/core/system-templates/templates/remotes/bestbuy/lircmd.conf.bestbuy2 +++ /dev/null @@ -1,34 +0,0 @@ -# -# lircmd config file -# - -#PROTOCOL IntelliMouse -PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * PLAY - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * FUNCTION -BUTTON2_TOGGLE * - -BUTTON3_TOGGLE * + - -BUTTON1_CLICK * TV/FM -BUTTON2_CLICK * SCAN -BUTTON3_CLICK * ZOOM - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core/system-templates/templates/remotes/bestbuy/preview.jpg b/abs/core/system-templates/templates/remotes/bestbuy/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/bestbuy/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/caraca/lircd.conf.caraca b/abs/core/system-templates/templates/remotes/caraca/lircd.conf.caraca deleted file mode 100644 index c1a0fa1..0000000 --- a/abs/core/system-templates/templates/remotes/caraca/lircd.conf.caraca +++ /dev/null @@ -1,46 +0,0 @@ -# -# -# contributed by Konrad Riedel <k.riedel@gmx.de> -# -# brand: CARACA -# model: RC5 Remote Control -# -# supported devices: -# CARACA nodes - see http://caraca.sourceforge.net -# first byte: node address -# 2nd byte: ir code -# - -begin remote - - name Caraca - bits 16 - - begin codes - POWER 0x3ff3 - 1 0x3ffe - 2 0x3ffd - 3 0x3ffc - 4 0x3ffb - 5 0x3ffa - 6 0x3ff9 - 7 0x3ff8 - 8 0x3ff7 - 9 0x3ff6 - 0 0x3ff5 - PAUSE 0x3fcf - EJECT 0x3fe2 - SEEK- 0x3fcd - PLAY 0x3fca - SEEK+ 0x3fcb - RECORD 0x3fd2 - STOP 0x3fc9 - CH- 0x3fde - CH+ 0x3fdf - VOL- 0x3fee - VOL+ 0x3fef - MUTE 0x3ff2 - TV/FM 0x3fe3 - end codes - -end remote diff --git a/abs/core/system-templates/templates/remotes/caraca/lircrc.caraca b/abs/core/system-templates/templates/remotes/caraca/lircrc.caraca deleted file mode 100644 index 6baf5e4..0000000 --- a/abs/core/system-templates/templates/remotes/caraca/lircrc.caraca +++ /dev/null @@ -1,134 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Konrad Riedel <k.riedel@gmx.de> -# -begin - prog = irexec - button = tv/fm - config = xawtv -geometry +64+64 & - mode = tv - flags = once -end - -begin tv - begin - prog = xawtv - button = power - config = quit - flags = mode - end - begin - prog = xawtv - button = source - repeat = 1 - config = setinput next - end - begin - prog = xawtv - button = zoom - repeat = 1 - config = fullscreen - end - begin - prog = xawtv - button = ch- - repeat = 1 - config = setstation prev - end - begin - prog = xawtv - button = ch+ - repeat = 1 - config = setstation next - end - begin - prog = xawtv - button = record - repeat = 1 - #config = snap jpeg - config = quit - end - begin - prog = xawtv - button = scan - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = xawtv - button = MUTE - config = volume mute - end -end tv -begin - prog = irexec - button = power - config = xmms& - mode = xmms - flags = once -end - -begin xmms - begin - prog = xmms - button = play - config = PLAY - end - begin - prog = xmms - button = pause - config = PAUSE - end - begin - prog = xmms - button = stop - config = STOP - end - begin - prog = xmms - button = vol- - repeat = 1 - config = VOL_DOWN - end - begin - prog = xmms - button = vol+ - repeat = 1 - config = VOL_UP - end - - begin - prog = xmms - button = power - config = QUIT - flags = mode - end - begin - prog = xmms - button = mute - config = MUTE - end - begin - prog = xmms - button = seek+ - repeat = 1 - config = FWD - end - begin - prog = xmms - button = seek- - repeat = 1 - config = BWD - end - begin - prog = xmms - button = ch+ - config = NEXT - end - begin - prog = xmms - button = ch- - config = PREV - end -end xmms diff --git a/abs/core/system-templates/templates/remotes/caraca/preview.jpg b/abs/core/system-templates/templates/remotes/caraca/preview.jpg Binary files differdeleted file mode 100644 index a034186..0000000 --- a/abs/core/system-templates/templates/remotes/caraca/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core/system-templates/templates/remotes/gr8zap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core/system-templates/templates/remotes/gr8zap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/gr8zap/lircrc b/abs/core/system-templates/templates/remotes/gr8zap/lircrc deleted file mode 100644 index 6f86bfe..0000000 --- a/abs/core/system-templates/templates/remotes/gr8zap/lircrc +++ /dev/null @@ -1,472 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY' -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -# ??? -begin - prog = mythtv - button = MUTE - config = F9 -end - -begin - prog = mythtv - button = CH_UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = ] -end - -begin - prog = mythtv - button = CH_DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = [ -end - -begin - prog = mythtv - button = UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = LEFT -# navigates, or skips back during playback or live tv. - config = Left -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = Right -end - -begin - prog = mythtv - button = DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = MENU - config = m -end - -begin - prog = mythtv - button = EXIT - config = Esc -end - -begin - prog = mythtv - button = PLAY - config = l -end - -begin - prog = mythtv - button = PAUSE - config = p -end - -begin - prog = mythtv - button = STOP - config = Esc -end - -begin - prog = mythtv - # skip backward - button = |<< - config = PgUp -end - -begin - prog = mythtv - # skip forward - button = >>| - config = PgDown -end - -begin - prog = mythtv - button = RECORD - config = r -end - -begin - prog = mythtv - # rewind - button = << - config = < -end - -begin - prog = mythtv - # fast forward - button = >> - config = > -end - -begin - prog = mythtv - button = RED - # Delete - config = z -end - -begin - prog = mythtv - button = GREEN - # Info - config = i -end - -begin - prog = mythtv - button = YELLOW - # change aspect ratio - config = w -end - -begin - prog = mythtv - button = BLUE - config = Tab -end - -# MPLAYER -begin - prog = mplayer - button = POWER - config = quit -end - -begin - prog = mplayer - button = MUTE - config = mute -end - -begin - prog = mplayer - button = VOL_UP - repeat = 3 - config = volume +1 -end - -begin - prog = mplayer - button = VOL_DOWN - repeat = 3 - config = volume -1 -end - -begin - prog = mplayer - button = UP - repeat = 3 - config = seek +10 -end - -begin - prog = mplayer - button = LEFT -# navigates, or skips back during playback or live tv. - config = seek -30 -end - -begin - prog = mplayer - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = seek +60 -end - -begin - prog = mplayer - button = DOWN - repeat = 3 - config = seek -10 -end - -begin - prog = mplayer - button = EXIT - config = quit -end - -begin - prog = mplayer - button = play - config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin - prog = mplayer - button = STOP - config = quit -end - -begin - prog = mplayer - # skip backward - button = |<< - config = seek -600 -end - -begin - prog = mplayer - # skip forward - button = >>| - config = seek +600 -end - -begin - prog = mplayer - # slow forward - button = << - config = speed_mult 0.5 -end - -begin - prog = mplayer - # fast forward - button = >> - config = speed_mult 2.0 -end - -### Xine lirc setup By AnDy! - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = UP -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = DOWN -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Menu -end - -begin -prog = xine -button = >> -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = << -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = >>| -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = |<< -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GREEN -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end diff --git a/abs/core/system-templates/templates/remotes/gr8zap/preview.jpg b/abs/core/system-templates/templates/remotes/gr8zap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core/system-templates/templates/remotes/gr8zap/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core/system-templates/templates/remotes/sigma_designs/lircd.conf.realmagic deleted file mode 100644 index 8aa4ef5..0000000 --- a/abs/core/system-templates/templates/remotes/sigma_designs/lircd.conf.realmagic +++ /dev/null @@ -1,83 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 -# -# contributed by Stefan Neuwirth & Andreas Lange <langsmethanromp@gmx.de> -# -# brand: Sigma Designs -# model: REALmagic remote control -# www.realmagic.com/support.htm#remote -# supported devices: -# "For Hollywood Plus Version 1.4 or above Driver only" -# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card -# receiver is connected to the serial port - it does not require the card -# -# The first byte always is 131. The second and third byte are equal. (CB) -# - -begin remote - - name REALmagic - bits 20 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 10 - pre_data 0x183 - gap 189974 - toggle_bit 0 - - - begin codes - 1 0x0000000000062D8B - 2 0x0000000000012C4B - 3 0x000000000001AC6B - 4 0x0000000000072DCB - 5 0x000000000000AC2B - 6 0x0000000000052D4B - -# Nicolas Vignal reported that this code is sent for his remote -# version (1.5). It should be no problem to just have two entries for -# "6" unless you want to send codes what won't work for this receiver -# anyway. - - 6 0x0000000000041505 - - 7 0x0000000000058561 - 8 0x0000000000044511 - 9 0x000000000004AD2B - 0 0x000000000004C531 - VOL+ 0x0000000000022C8B - VOL- 0x0000000000032CCB - MUTE 0x000000000006ADAB - L-R 0x0000000000052549 - VGA 0x0000000000054551 - ENTER 0x0000000000042509 - QUIT 0x0000000000058D63 - PRG 0x0000000000038CE3 - UP 0x0000000000078DE3 - DOWN 0x0000000000064D93 - LEFT 0x0000000000044D13 - RIGHT 0x000000000003ECFB - SELECT 0x0000000000024C93 - MENU 0x0000000000014C53 - TITLE 0x0000000000054D53 - OSD 0x0000000000034CD3 - LANG 0x0000000000074DD3 - ANGLE 0x000000000000CC33 - SUB 0x000000000004CD33 - PAUSE 0x000000000002CCB3 - STOP 0x000000000006CDB3 - PLAY 0x000000000001CC73 - EJECT 0x000000000005CD73 - REV 0x000000000003CCF3 - FF 0x000000000007CDF3 - PREV 0x0000000000002C0B - NEXT 0x0000000000042D0B - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf b/abs/core/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf deleted file mode 100755 index edc97f5..0000000 --- a/abs/core/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf +++ /dev/null @@ -1,70 +0,0 @@ -# -# this config file was automatically generated -# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sat Sep 09 22:22:16 2006 -# -# contributed by David Salisbury -# -# brand: SnapStream -# model: Firefly-Mini -# supported devices: -# - -begin remote - - name SnapStream_Firefly-Mini - bits 16 - flags SPACE_ENC - eps 25 - aeps 100 - - header 9052 4475 - one 627 1623 - zero 627 496 - ptrail 627 - repeat 9081 2206 - pre_data_bits 16 - pre_data 0xFF - gap 39962 - toggle_bit 0 - - - begin codes - Close 0xC23D - Mute 0xE21D - 1 0xD22D - 2 0xF20D - 3 0xCA35 - 4 0xEA15 - 5 0xDA25 - 6 0xFA05 - 7 0x827D - 8 0xA25D - 9 0x926D - 0 0x8A75 - VolumeUp 0xB24D - VolumeDown 0x9A65 - ChannelUp 0xAA55 - ChannelDown 0x02FD - Up 0xBA45 - Down 0x0AF5 - Left 0x22DD - Right 0x32CD - OK 0x12ED - Last 0x2AD5 - Exit 0x1AE5 - Option 0x3AC5 - Firefly 0xC03F - Menu 0xE01F - Record 0xD02F - Guide 0xF00F - Stop 0xC837 - Previous 0xE817 - Play 0xD827 - Next 0xF807 - Rewind 0x40BF - Pause 0x609F - FastForward 0x50AF - end codes - -end remote - diff --git a/abs/core/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt b/abs/core/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt deleted file mode 100755 index 4c557a2..0000000 --- a/abs/core/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt +++ /dev/null @@ -1,474 +0,0 @@ -# Channel Up -begin -prog = mythtv -button = ChannelUp -config = Up -end - -# Channel Down -begin -prog = mythtv -button = ChannelDown -config = Down -end - -# General Left -begin -prog = mythtv -button = Left -config = Left -end - -# General Right -begin -prog = mythtv -button = Right -config = Right -end - - # LiveTV browse up channel -begin -prog = mythtv -button = Up -config = Up -end - -# LiveTV browse down channel -begin -prog = mythtv -button = Down -config = Down -end - -# Volume Up -begin -prog = mythtv -button = VolumeUp -config = F11 -end - -# Volume Down -begin -prog = mythtv -button = VolumeDown -config = F10 -end - - # OK/Select -begin -prog = mythtv -button = OK -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = Exit -config = Esc -end - -# Power Off/Exit -begin -prog = irexec -button = Firefly -config = /usr/bin/mythpowerbutton.sh -end - -# Pause -begin -prog = mythtv -button = Pause -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -config = | -end - -# Fast forward (10 sec default) -begin -prog = mythtv -button = FastForward -config = Right -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Rewind -config = Left -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Next -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Previous -config = PgUp -end - -# Record -begin -prog = mythtv -button = Record -config = R -end - -# Delete -begin -prog = mythtv -button = -config = D -end - -# OSD browse -begin -prog = mythtv -button = -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Guide -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Option -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = -config = Z -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -# Previous channel -begin -prog = mythtv -button = Last -config = H -end - -# Closed Captioning -begin -prog = mythtv -button = Close -config = T -end - -# Picture in Picture -begin -prog = mythtv -button = -config = V -end - -# Change channels on both cards -begin -prog = mythtv -button = -config = N -end - -# Clear cutpoints in cutlist -begin -prog = mythtv -button = -config = Q -end - - - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = Guide -config = osd -end - -# Pause playback -begin -prog = mplayer -button = Pause -config = pause -end - -# Mute -begin -prog = mplayer -button = Mute -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = Rewind -config = seek -10 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = FastForward -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = Stop -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = Next -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = Previous -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = -config = vo_fullscreen -end - - - -### Xine lirc setup - -begin -prog = xine -button = Play -config = Play -end - -begin -prog = xine -button = Stop -config = Stop -end - -begin -prog = xine -button = Exit -config = Quit -end - -begin -prog = xine -button = Pause -config = Pause -end - -begin -prog = xine -button = Up -config = EventUp -end - -begin -prog = xine -button = Down -config = EventDown -end - -begin -prog = xine -button = Left -config = EventLeft -end - -begin -prog = xine -button = Right -config = EventRight -end - -begin -prog = xine -button = OK -config = EventSelect -end - -begin -prog = xine -button = Guide -config = Menu -end - -begin -prog = xine -button = FastForward -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = Rewind -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VolumeUp -config = Volume+ -end - -begin -prog = xine -button = VolumeDown -config = Volume- -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = Stop -config = RootMenu -end - -begin -prog = xine -button = Next -config = EventNext -end - -begin -prog = xine -button = Previous -config = EventPrior -end - -begin -prog = xine -button = Firefly -config = OSDStreamInfos -end
\ No newline at end of file diff --git a/abs/core/system-templates/templates/remotes/snapstream_mini/preview.jpg b/abs/core/system-templates/templates/remotes/snapstream_mini/preview.jpg Binary files differdeleted file mode 100644 index aa6d9d2..0000000 --- a/abs/core/system-templates/templates/remotes/snapstream_mini/preview.jpg +++ /dev/null diff --git a/abs/core/system-templates/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core/system-templates/templates/remotes/technisat/lircd.conf.mediafocusI deleted file mode 100644 index 6dd84f9..0000000 --- a/abs/core/system-templates/templates/remotes/technisat/lircd.conf.mediafocusI +++ /dev/null @@ -1,42 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000 -# -# contributed by Peter Schlaf -# -# brand: Technisat -# model: -# supported devices: MediaFocus PC card -# - -begin remote - - name TECHNISAT - bits 10 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 150 - - one 141 7590 - zero 141 5090 - ptrail 141 - pre_data_bits 1 - pre_data 0x1 - gap 121440 - repeat_bit 0 - toggle_bit 2 - - frequency 38000 - duty_cycle 33 - - begin codes - MUTE 0x0000000000000046 - VOL+ 0x000000000000006E - VOL- 0x000000000000006F - CH+ 0x0000000000000047 - CH- 0x0000000000000048 - end codes - -end remote - - diff --git a/abs/core/system-templates/templates/remotes/x10/lircd.conf.mouseremote b/abs/core/system-templates/templates/remotes/x10/lircd.conf.mouseremote deleted file mode 100644 index 73df340..0000000 --- a/abs/core/system-templates/templates/remotes/x10/lircd.conf.mouseremote +++ /dev/null @@ -1,116 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# modified by Brian Craft -# -# brand: X10 -# model: MP3 MouseRemote, Model mk19a -# - -begin remote - - name mouseremote - bits 16 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x08 - post_data_bits 8 - post_data 0x7f - min_repeat 2 - gap 140000 - - begin codes - POWER 0x000000000000000F - PC 0x000000000000002B - LAST 0x000000000000004F - CHANUP 0x0000000000000002 - CHANDOWN 0x0000000000000003 - VOLUP 0x0000000000000006 - VOLDOWN 0x0000000000000007 - MUTE 0x0000000000000005 - 1 0x0000000000000041 - 2 0x0000000000000042 - 3 0x0000000000000043 - 4 0x0000000000000044 - 5 0x0000000000000045 - 6 0x0000000000000046 - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x0000000000000040 - ENTER 0x000000000000004a - ADOTB 0x000000000000005D - REWIND 0x000000000000001C - PLAY 0x000000000000000D - FFWD 0x000000000000001D - STOP 0x000000000000000E - PAUSE 0x000000000000004E - RECORD 0x00000000000000FF - ENTER 0x000000000000004A - LAST 0x000000000000004F - DISP 0x000000000000005C - SHIFT 0x000000000000006B - GUIDE 0x000000000000006D - SELECT 0x0000000000000093 - PHONE 0x000000000000004B - WEB 0x000000000000008B - CD 0x00000000000000AB - DVD 0x00000000000000CB - MOUSE_SLOW_N 0x0000000000000110 - MOUSE_SLOW_NNE 0x0000000000000131 - MOUSE_SLOW_NE 0x0000000000000111 - MOUSE_SLOW_ENE 0x0000000000000113 - MOUSE_SLOW_E 0x0000000000000101 - MOUSE_SLOW_ESE 0x0000000000000193 - MOUSE_SLOW_SE 0x0000000000000191 - MOUSE_SLOW_SSE 0x00000000000001B1 - MOUSE_SLOW_S 0x0000000000000190 - MOUSE_SLOW_SSW 0x00000000000001B9 - MOUSE_SLOW_SW 0x0000000000000199 - MOUSE_SLOW_WSW 0x000000000000019B - MOUSE_SLOW_W 0x0000000000000109 - MOUSE_SLOW_WNW 0x000000000000011B - MOUSE_SLOW_NW 0x0000000000000119 - MOUSE_SLOW_NNW 0x0000000000000139 - MOUSE_MEDIUM_N 0x0000000000000310 - MOUSE_MEDIUM_NNE 0x0000000000000331 - MOUSE_MEDIUM_NE 0x0000000000000311 - MOUSE_MEDIUM_ENE 0x0000000000000313 - MOUSE_MEDIUM_E 0x0000000000000301 - MOUSE_MEDIUM_ESE 0x0000000000000393 - MOUSE_MEDIUM_SE 0x0000000000000391 - MOUSE_MEDIUM_SSE 0x00000000000003B1 - MOUSE_MEDIUM_S 0x0000000000000390 - MOUSE_MEDIUM_SSW 0x00000000000003B9 - MOUSE_MEDIUM_SW 0x0000000000000399 - MOUSE_MEDIUM_WSW 0x000000000000039B - MOUSE_MEDIUM_W 0x0000000000000309 - MOUSE_MEDIUM_WNW 0x000000000000031B - MOUSE_MEDIUM_NW 0x0000000000000319 - MOUSE_MEDIUM_NNW 0x0000000000000339 - MOUSE_FAST_N 0x0000000000000510 - MOUSE_FAST_NNE 0x0000000000000531 - MOUSE_FAST_NE 0x0000000000000511 - MOUSE_FAST_ENE 0x0000000000000513 - MOUSE_FAST_E 0x0000000000000501 - MOUSE_FAST_ESE 0x0000000000000593 - MOUSE_FAST_SE 0x0000000000000591 - MOUSE_FAST_SSE 0x00000000000005B1 - MOUSE_FAST_S 0x0000000000000590 - MOUSE_FAST_SSW 0x00000000000005B9 - MOUSE_FAST_SW 0x0000000000000599 - MOUSE_FAST_WSW 0x000000000000059B - MOUSE_FAST_W 0x0000000000000509 - MOUSE_FAST_WNW 0x000000000000051B - MOUSE_FAST_NW 0x0000000000000519 - MOUSE_FAST_NNW 0x0000000000000539 - BUTTONR_DOWN 0x0000000000000801 - BUTTONL_DOWN 0x0000000000000804 - BUTTON_UP 0x0000000000000800 - end codes - -end remote diff --git a/abs/core/system-templates/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core/system-templates/templates/remotes/x10/lircd.conf.mp3anywhere deleted file mode 100644 index c9bb727..0000000 --- a/abs/core/system-templates/templates/remotes/x10/lircd.conf.mp3anywhere +++ /dev/null @@ -1,64 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# -# brand: X10 -# model: MP3 Anywhere Remote, Model UR81A -# supported devices: at least FireCracker Receiver Model MR26A, maybe more -# - -begin remote - - name mp3anywhere - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0xD5AAEE - min_repeat 2 - gap 140000 - - begin codes - POWER 0x00000000000000F0 - PC 0x00000000000000D4 - LAST 0x00000000000000F2 - CHANUP 0x0000000000000040 - CHANDOWN 0x00000000000000C0 - VOLUP 0x0000000000000060 - VOLDOWN 0x00000000000000E0 - MUTE 0x00000000000000A0 - ONE 0x0000000000000082 - TWO 0x0000000000000042 - THREE 0x00000000000000C2 - FOUR 0x0000000000000022 - FIVE 0x00000000000000A2 - SIX 0x0000000000000062 - SEVEN 0x00000000000000E2 - EIGHT 0x0000000000000012 - NINE 0x0000000000000092 - ZERO 0x0000000000000002 - ENTER 0x0000000000000052 - ADOTB 0x00000000000000BA - A 0x000000000000003A - B 0x00000000000000D8 - C 0x00000000000000D6 - D 0x00000000000000D4 - MENU 0x00000000000000B6 - EXIT 0x00000000000000C9 - UP 0x00000000000000D5 - DOWN 0x00000000000000D3 - LEFT 0x00000000000000D2 - RIGHT 0x00000000000000D1 - OK 0x0000000000000052 - REWIND 0x0000000000000038 - PLAY 0x00000000000000B0 - FFWD 0x00000000000000B8 - RECORD 0x00000000000000FF - STOP 0x0000000000000070 - PAUSE 0x0000000000000072 - end codes - -end remote diff --git a/abs/core/system-templates/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core/system-templates/templates/remotes/x10/lircmd.conf.mouseremote deleted file mode 100644 index c3c23b1..0000000 --- a/abs/core/system-templates/templates/remotes/x10/lircmd.conf.mouseremote +++ /dev/null @@ -1,288 +0,0 @@ -# -# lircmd config file for the mouseremote control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - -MOVE_N mouseremote MOUSE_SLOW_N -MOVE_N mouseremote MOUSE_SLOW_N - -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N - -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N - -MOVE_N mouseremote MOUSE_SLOW_NNE -MOVE_NE mouseremote MOUSE_SLOW_NNE - -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE - -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE - -MOVE_NE mouseremote MOUSE_SLOW_NE -MOVE_NE mouseremote MOUSE_SLOW_NE - -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE - -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE - -MOVE_E mouseremote MOUSE_SLOW_ENE -MOVE_NE mouseremote MOUSE_SLOW_ENE - -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE - -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE - -MOVE_E mouseremote MOUSE_SLOW_E -MOVE_E mouseremote MOUSE_SLOW_E - -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E - -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E - -MOVE_E mouseremote MOUSE_SLOW_ESE -MOVE_SE mouseremote MOUSE_SLOW_ESE - -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE - -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE - -MOVE_SE mouseremote MOUSE_SLOW_SE -MOVE_SE mouseremote MOUSE_SLOW_SE - -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE - -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE - -MOVE_S mouseremote MOUSE_SLOW_SSE -MOVE_SE mouseremote MOUSE_SLOW_SSE - -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE - -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE - -MOVE_S mouseremote MOUSE_SLOW_S -MOVE_S mouseremote MOUSE_SLOW_S - -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S - -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S - -MOVE_S mouseremote MOUSE_SLOW_SSW -MOVE_SW mouseremote MOUSE_SLOW_SSW - -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW - -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW - -MOVE_SW mouseremote MOUSE_SLOW_SW -MOVE_SW mouseremote MOUSE_SLOW_SW - -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW - -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW - -MOVE_W mouseremote MOUSE_SLOW_WSW -MOVE_SW mouseremote MOUSE_SLOW_WSW - -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW - -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW - -MOVE_W mouseremote MOUSE_SLOW_W -MOVE_W mouseremote MOUSE_SLOW_W - -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W - -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W - -MOVE_W mouseremote MOUSE_SLOW_WNW -MOVE_NW mouseremote MOUSE_SLOW_WNW - -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW - -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW - -MOVE_NW mouseremote MOUSE_SLOW_NW -MOVE_NW mouseremote MOUSE_SLOW_NW - -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW - -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW - -MOVE_N mouseremote MOUSE_SLOW_NNW -MOVE_NW mouseremote MOUSE_SLOW_NNW - -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW - -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW - -BUTTON1_DOWN mouseremote BUTTONL_DOWN -BUTTON2_DOWN mouseremote BUTTONR_DOWN - -BUTTON1_UP mouseremote BUTTON_UP -BUTTON2_UP mouseremote BUTTON_UP |
