1 files changed, 149 insertions, 0 deletions
diff --git a/abs/extra/blas/Makefile.blas b/abs/extra/blas/Makefile.blas
new file mode 100644
index 0000000..0c6cd06
--- /dev/null
+++ b/abs/extra/blas/Makefile.blas
@@ -0,0 +1,149 @@
+include ../../make.inc
+
+#######################################################################
+#  This is the makefile to create a library for the BLAS.
+#  The files are grouped as follows:
+#
+#       SBLAS1 -- Single precision real BLAS routines
+#       CBLAS1 -- Single precision complex BLAS routines
+#       DBLAS1 -- Double precision real BLAS routines
+#       ZBLAS1 -- Double precision complex BLAS routines
+#
+#       CB1AUX -- Real BLAS routines called by complex routines
+#       ZB1AUX -- D.P. real BLAS routines called by d.p. complex
+#                 routines
+#
+#      ALLBLAS -- Auxiliary routines for Level 2 and 3 BLAS
+#
+#       SBLAS2 -- Single precision real BLAS2 routines
+#       CBLAS2 -- Single precision complex BLAS2 routines
+#       DBLAS2 -- Double precision real BLAS2 routines
+#       ZBLAS2 -- Double precision complex BLAS2 routines
+#
+#       SBLAS3 -- Single precision real BLAS3 routines
+#       CBLAS3 -- Single precision complex BLAS3 routines
+#       DBLAS3 -- Double precision real BLAS3 routines
+#       ZBLAS3 -- Double precision complex BLAS3 routines
+#
+#  The library can be set up to include routines for any combination
+#  of the four precisions.  To create or add to the library, enter make
+#  followed by one or more of the precisions desired.  Some examples:
+#       make single
+#       make single complex
+#       make single double complex complex16
+#  Note that these commands are not safe for parallel builds.
+#
+#  Alternatively, the commands
+#       make all
+#  or
+#       make
+#  without any arguments creates a library of all four precisions.
+#  The name of the library is held in BLASLIB, which is set in the
+#  top-level make.inc
+#
+#  To remove the object files after the library is created, enter
+#       make clean
+#  To force the source files to be recompiled, enter, for example,
+#       make single FRC=FRC
+#
+#---------------------------------------------------------------------
+#
+#  Edward Anderson, University of Tennessee
+#  March 26, 1990
+#  Susan Ostrouchov, Last updated September 30, 1994
+#  ejr, May 2006.
+#
+#######################################################################
+
+all: $(BLASLIB)
+ 
+#---------------------------------------------------------
+#  Comment out the next 6 definitions if you already have
+#  the Level 1 BLAS.
+#---------------------------------------------------------
+SBLAS1 = isamax.o sasum.o saxpy.o scopy.o sdot.o snrm2.o \
+	srot.o srotg.o sscal.o sswap.o sdsdot.o srotmg.o srotm.o
+$(SBLAS1): $(FRC)
+
+CBLAS1 = scabs1.o scasum.o scnrm2.o icamax.o caxpy.o ccopy.o \
+	cdotc.o cdotu.o csscal.o crotg.o cscal.o cswap.o csrot.o
+$(CBLAS1): $(FRC)
+
+DBLAS1 = idamax.o dasum.o daxpy.o dcopy.o ddot.o dnrm2.o \
+	drot.o drotg.o dscal.o dsdot.o dswap.o drotmg.o drotm.o
+$(DBLAS1): $(FRC)
+
+ZBLAS1 = dcabs1.o dzasum.o dznrm2.o izamax.o zaxpy.o zcopy.o \
+	zdotc.o zdotu.o zdscal.o zrotg.o zscal.o zswap.o zdrot.o
+$(ZBLAS1): $(FRC)
+
+CB1AUX = isamax.o sasum.o saxpy.o scopy.o snrm2.o sscal.o
+$(CB1AUX): $(FRC)
+
+ZB1AUX = idamax.o dasum.o daxpy.o dcopy.o dnrm2.o dscal.o
+$(ZB1AUX): $(FRC)
+
+#---------------------------------------------------------------------
+#  The following line defines auxiliary routines needed by both the
+#  Level 2 and Level 3 BLAS.  Comment it out only if you already have
+#  both the Level 2 and 3 BLAS.
+#---------------------------------------------------------------------
+ALLBLAS  = lsame.o xerbla.o xerbla_array.o
+$(ALLBLAS) : $(FRC)
+
+#---------------------------------------------------------
+#  Comment out the next 4 definitions if you already have
+#  the Level 2 BLAS.
+#---------------------------------------------------------
+SBLAS2 = sgemv.o sgbmv.o ssymv.o ssbmv.o sspmv.o \
+	strmv.o stbmv.o stpmv.o strsv.o stbsv.o stpsv.o \
+	sger.o ssyr.o sspr.o ssyr2.o sspr2.o
+$(SBLAS2): $(FRC)
+
+CBLAS2 = cgemv.o cgbmv.o chemv.o chbmv.o chpmv.o \
+	ctrmv.o ctbmv.o ctpmv.o ctrsv.o ctbsv.o ctpsv.o \
+	cgerc.o cgeru.o cher.o chpr.o cher2.o chpr2.o
+$(CBLAS2): $(FRC)
+
+DBLAS2 = dgemv.o dgbmv.o dsymv.o dsbmv.o dspmv.o \
+	dtrmv.o dtbmv.o dtpmv.o dtrsv.o dtbsv.o dtpsv.o \
+	dger.o dsyr.o dspr.o dsyr2.o dspr2.o
+$(DBLAS2): $(FRC)
+
+ZBLAS2 = zgemv.o zgbmv.o zhemv.o zhbmv.o zhpmv.o \
+	ztrmv.o ztbmv.o ztpmv.o ztrsv.o ztbsv.o ztpsv.o \
+	zgerc.o zgeru.o zher.o zhpr.o zher2.o zhpr2.o
+$(ZBLAS2): $(FRC)
+
+#---------------------------------------------------------
+#  Comment out the next 4 definitions if you already have
+#  the Level 3 BLAS.
+#---------------------------------------------------------
+SBLAS3 = sgemm.o ssymm.o ssyrk.o ssyr2k.o strmm.o strsm.o 
+$(SBLAS3): $(FRC)
+
+CBLAS3 = cgemm.o csymm.o csyrk.o csyr2k.o ctrmm.o ctrsm.o \
+	chemm.o cherk.o cher2k.o
+$(CBLAS3): $(FRC)
+
+DBLAS3 = dgemm.o dsymm.o dsyrk.o dsyr2k.o dtrmm.o dtrsm.o
+$(DBLAS3): $(FRC)
+
+ZBLAS3 = zgemm.o zsymm.o zsyrk.o zsyr2k.o ztrmm.o ztrsm.o \
+	zhemm.o zherk.o zher2k.o
+$(ZBLAS3): $(FRC)
+
+ALLOBJ=$(SBLAS1) $(SBLAS2) $(SBLAS3) $(DBLAS1) $(DBLAS2) $(DBLAS3)	\
+	$(CBLAS1) $(CBLAS2) $(CBLAS3) $(ZBLAS1) \
+	$(ZBLAS2) $(ZBLAS3) $(ALLBLAS)
+
+clean:
+	rm -f *.o libblas.a libblas.so*
+
+static: $(ALLOBJ)
+	ar ruv libblas.a $(ALLOBJ)
+	ranlib libblas.a
+
+shared: $(ALLOBJ)
+	cc $(CFLAGS) -shared -Wl,-soname,libblas.so.3 -o libblas.so.3.4.0 $(ALLOBJ) -lm -lgfortran -lc
+