diff options
Diffstat (limited to 'abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample')
| -rw-r--r-- | abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample b/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample deleted file mode 100644 index a492c8b..0000000 --- a/abs/extra/ddclient/ddclient.conf.dynamic.dyndns.sample +++ /dev/null @@ -1,162 +0,0 @@ -###################################################################### -## -## $Id: sample-etc_ddclient.conf 102 2008-11-01 11:23:03Z wimpunk $ -## -## Define default global variables with lines like: -## var=value [, var=value]* -## These values will be used for each following host unless overridden -## with a local variable definition. -## -## Define local variables for one or more hosts with: -## var=value [, var=value]* host.and.domain[,host2.and.domain...] -## -## Lines can be continued on the following line by ending the line -## with a \ -## -## -## Warning: not all supported routers or dynamic DNS services -## are mentioned here. -## -###################################################################### -daemon=300 # check every 300 seconds -syslog=yes # log update msgs to syslog -mail=root # mail all msgs to root -mail-failure=root # mail failed update msgs to root -pid=/var/run/ddclient.pid # record PID in file. -ssl=yes # use ssl-support. Works with - # ssl-library -# postscript=script # run script after updating. The - # new IP is added as argument. -# -#use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW -#use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW -#use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW -#use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW -#use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW -#use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW -#use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router -#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router -#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router -#use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro -#use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router -#use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL Router -#use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com OfficeConnect Remote 812 -#use=e-tech, fw=192.168.1.1:80 # via E-tech Router -#use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H DSL Router -# -#fw-login=admin, fw-password=XXXXXX # FW login and password -# -## To obtain an IP address from FW status page (using fw-login, fw-password) -#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address -# -## To obtain an IP address from Web status page (using the proxy if defined) -#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address -# -#use=ip, ip=127.0.0.1 # via static IP's -#use=if, if=eth0 # via interfaces -use=web # via web -# -#protocol=dyndns2 # default protocol -#proxy=fasthttp.sympatico.ca:80 # default proxy -#server=members.dyndns.org # default server -#server=members.dyndns.org:8245 # default server (bypassing proxies) - -login=your-dynamic-dyndns-login # default login -password=your-dynamic-dyndns-password # default password -#mx=mx.for.your.host # default MX -#backupmx=yes|no # host is primary MX? -#wildcard=yes|no # add wildcard CNAME? - -## -## dyndns.org dynamic addresses -## -## (supports variables: wildcard,mx,backupmx) -## -server=members.dyndns.org, \ -protocol=dyndns2 \ -your-dynamic-dyndns-host - -## -## dyndns.org static addresses -## -## (supports variables: wildcard,mx,backupmx) -## -# static=yes, \ -# server=members.dyndns.org, \ -# protocol=dyndns2 \ -# your-static-host.dyndns.org - -## -## -## dyndns.org custom addresses -## -## (supports variables: wildcard,mx,backupmx) -## -# custom=yes, \ -# server=members.dyndns.org, \ -# protocol=dyndns2 \ -# your-domain.top-level,your-other-domain.top-level - -## -## ZoneEdit (zoneedit.com) -## -# server=dynamic.zoneedit.com, \ -# protocol=zoneedit1, \ -# login=your-zoneedit-login, \ -# password=your-zoneedit-password \ -# your.any.domain,your-2nd.any.dom - -## -## EasyDNS (easydns.com) -## -# server=members.easydns.com, \ -# protocol=easydns, \ -# login=your-easydns-login, \ -# password=your-easydns-password \ -# your.any.domain,your-2nd.any.domain - -## -## Hammernode (hn.org) dynamic addresses -## -# server=dup.hn.org, \ -# protocol=hammernode1, \ -# login=your-hn-login, \ -# password=your-hn-password \ -# your-hn-host.hn.org,your-2nd-hn-host.hn.org - -## -## dslreports.com dynamic-host monitoring -## -# server=members.dslreports.com \ -# protocol=dslreports1, \ -# login=dslreports-login, \ -# password=dslreports-password \ -# dslreports-unique-id - -## -## OrgDNS.org account-configuration -## -# use=web, web=members.orgdns.org/nic/ip -# server=www.orgdns.org \ -# protocol=dyndns2 \ -# login=yourLoginName \ -# password=yourPassword \ -# yourSubdomain.orgdns.org - -## -## dnspark.com -## (supports variables: mx, mxpri) -## -# use=web, web=ipdetect.dnspark.com, web-skip='Current Address:' -# protocol=dnspark, \ -# server=www.dnspark.com, \ -# your-host.dnspark.com - -## -## NameCheap (namecheap.com) -## -# protocol=namecheap, \ -# server=dynamicdns.park-your-domain.com, \ -# login=my-namecheap.com-login, \ -# password=my-namecheap.com-password \ -# myhost.namecheap.com |