diff options
Diffstat (limited to 'abs')
| -rwxr-xr-x | abs/core-testing/LinHES-config/PKGBUILD | 2 | ||||
| -rwxr-xr-x | abs/core-testing/LinHES-config/install_db_chroot.sh | 18 | ||||
| -rwxr-xr-x | abs/core-testing/LinHES-config/install_functions.sh | 3 | ||||
| -rwxr-xr-x | abs/core-testing/LinHES-config/install_proxy.sh | 155 | ||||
| -rw-r--r-- | abs/core-testing/LinHES-config/networkconfig.sh | 20 | ||||
| -rw-r--r-- | abs/core-testing/LinHES-config/restore_km_db_chroot.sh | 8 | ||||
| -rwxr-xr-x | abs/core-testing/LinHES-config/systemconfig.sh | 96 | ||||
| -rwxr-xr-x | abs/core-testing/LinHES-config/xconfig.sh | 16 |
8 files changed, 208 insertions, 110 deletions
diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD index 68f88c9..1a9a0be 100755 --- a/abs/core-testing/LinHES-config/PKGBUILD +++ b/abs/core-testing/LinHES-config/PKGBUILD @@ -1,6 +1,6 @@ pkgname=LinHES-config pkgver=1.0 -pkgrel=115 +pkgrel=141 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) pkgdesc="Install and configure your system" depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan ) diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh index 1ec8cec..5dcef79 100755 --- a/abs/core-testing/LinHES-config/install_db_chroot.sh +++ b/abs/core-testing/LinHES-config/install_db_chroot.sh @@ -1,10 +1,17 @@ #!/bin/bash . /etc/profile . /etc/systemconfig -#myhost=`cat /etc/hostname` + + myhost=$hostname hostname $myhost -mount -t proc none /proc +echo $myhost > /etc/hostname +echo "install_db_chroot hostname is $hostname" + +. $MV_ROOT/bin/install_functions.sh +#myhost=`cat /etc/hostname` + +#mount -t proc none /proc pacman --noconfirm -Sf mysql /etc/rc.d/mysqld @@ -32,20 +39,23 @@ do then $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost fi + update_db_settings HostServiceMythWEB "1" + echo 'UseMythWEB="1"' >> /etc/systemconfig + #update database to allow user jobs on this host. $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL if [ -d /data/srv/mysql/mythconverg ] #if [ -d /var/lib/mysql/mythconverg ] then - # pacman --noconfirm -R webcalendar + # pacman --noconfirm -R webcalendar # pacman --noconfirm --nodeps -S webcalendar status=0 fi fi fi done -#/etc/rc.d/mysqld stop +/etc/rc.d/mysqld stop #umount /proc diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh index d976dbb..f9b2a4c 100755 --- a/abs/core-testing/LinHES-config/install_functions.sh +++ b/abs/core-testing/LinHES-config/install_functions.sh @@ -13,6 +13,7 @@ BASE="" function update_db_settings () { + echo "setting database value $1 to $2 for $hostname" $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";" $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";" } @@ -289,6 +290,8 @@ mount_it () { unmount_it () { umount /dev/${disk}1 umount /dev/${disk}3 + umount \/$mountpoint/myth + umount \/$mountpoint } diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh index f251c70..f950b83 100755 --- a/abs/core-testing/LinHES-config/install_proxy.sh +++ b/abs/core-testing/LinHES-config/install_proxy.sh @@ -1,5 +1,6 @@ #!/bin/bash #chroot and /tmp +export TERM=vt100 MVHOSTNAME=larch5 . /etc/profile TEMP_TEMPLATES=/tmp/templates @@ -19,6 +20,19 @@ BACKUPFILE="/myth/backup/mythconverg.sql.gz" #TEMPNET="Hostip"$default_interface #eval MYTHIP=\$${TEMPNET} +function cp_and_log () { + ls $1 2>&1 >/dev/null + status=$? + if [ $status = 0 ] + then + echo "copying $1 to $2" + cp -rfp $1 $2 + else + echo "$1 is not present, skipping..." + fi + +} + progress () { mypercent=`echo "$1" | cut -d. -f1` @@ -73,7 +87,7 @@ function upgrade_mount_search { if [ $? = 1 ] then mkdir -p /new_boot/root/backup - cp -f /tmp/mythconverg.sql.gz /new_boot/root/backup/mythconverg.sql.gz + cp_and_log /tmp/mythconverg.sql.gz /new_boot/root/backup/mythconverg.sql.gz BACKUPFILE="/root/backup/mythconverg.sql.gz" echo "setting BACKUPFILE to $BACKUPFILE" fi @@ -119,37 +133,48 @@ full_install () { echo "Configuring system" > /tmp/.install_state progress 100 sleep 1 - cp -f /etc/systemconfig "$mountpoint"/etc + cp_and_log /etc/systemconfig "$mountpoint"/etc #run save syssettings to save settings, then copy to new mountpoint $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost SE=$TEMPLATES/settings/syssettings mkdir -p ${mountpoint}$SE - cp -rp $SE/* ${mountpoint}$SE/ + #cp -rp $SE/* ${mountpoint}$SE/ + cp_and_log "$SE/*" "${mountpoint}$SE/" chown root:mythtv "$mountpoint"/etc/systemconfig chown -R mythtv:mythtv ${mountpoint}$SE chmod -R 775 ${mountpoint}$SE chmod 775 "$mountpoint"/etc/systemconfig #copy over any updates that might have occured - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + #cp -rp $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/ chmod -R 755 ${mountpoint}/root - cp /etc/mtab "$mountpoint"/etc/mtab + cp_and_log /etc/mtab "$mountpoint"/etc/mtab + # cp_and_log /etc/hostname "$mountpoint"/etc/hostname apply_new_auth if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] then #installing DB to local machine - #turn off old live database, so the chroot one can start + #turn off old live database, so the chroot one can start + echo "---------------------CHROOT INSTALLDB-------------------------" /etc/rc.d/mysqld stop mount --bind /dev "$mountpoint/dev" - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out + mount --bind /proc "$mountpoint/proc" + chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" 2>&1 |tee /tmp/chrootdb.out + #chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install echo "stopping mysql in chroot" chroot "$mountpoint" /etc/rc.d/mysqld stop - umount "$mountpoint/dev" - - #/etc/rc.d/mysqld start + kill_dhcp_chroot + sleep 2 + lsof |grep new_boot + umount -l "$mountpoint/dev" + umount -l "$mountpoint/proc" + + echo "---------------------END CHROOT INSTALLDB-------------------------" + /etc/rc.d/mysqld start else #update remotedb with this host settings chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 @@ -168,8 +193,9 @@ full_install () { touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ - $run unmount_it $disk + cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/ + $run umount_it $disk + } function createsquashlist(){ @@ -207,8 +233,8 @@ function upgrade () { echo "STARTSIZE=$startsize">/tmp/.startsize.io echo "Upgrading $hostname" > /tmp/.install_state sleep 1 - cp -rf /tmp/etc /new_boot/etc.old - cp -rf /tmp/oss /new_boot/var/lib/oss.old + cp_and_log /tmp/etc /new_boot/etc.old + cp_and_log /tmp/oss /new_boot/var/lib/oss.old SQUASHLIST="/tmp/.squashlist" @@ -216,17 +242,18 @@ function upgrade () { $run copy_it $disk $SQUASHLIST #copy back ssh keys -# cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ - cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/mdadm.conf /new_boot/etc/ +# cp_and_log -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ + cp_and_log "/new_boot/etc.old/ssh/*.pub" /new_boot/etc/ssh/ + cp_and_log "/new_boot/etc.old/ssh/*.key" /new_boot/etc/ssh/ + cp_and_log "/new_boot/etc.old/ssh/*key" /new_boot/etc/ssh/ + cp_and_log /new_boot/etc.old/mdadm/mdadm.conf /new_boot/etc/ + cp_and_log /new_boot/etc.old/asound.state /new_boot/etc/ if [ ! -f /tmp/etc/KnoppMyth-version ] then #passwd/shadow/group - cp -fp /new_boot/etc.old/passwd /new_boot/etc/ - cp -fp /new_boot/etc.old/shadow /new_boot/etc/ - cp -fp /new_boot/etc.old/group /new_boot/etc/ + cp_and_log /new_boot/etc.old/passwd /new_boot/etc/ + cp_and_log /new_boot/etc.old/shadow /new_boot/etc/ + cp_and_log /new_boot/etc.old/group /new_boot/etc/ fi if [ x$rootfs = "xDo_not_format" ] @@ -236,7 +263,7 @@ function upgrade () { $run fstab_fix_it $disk UPGRADE #this is here to copy in the systemconfig file as soon as possible. - cp -f /etc/systemconfig "$mountpoint"/etc + cp_and_log /etc/systemconfig "$mountpoint"/etc/systemconfig echo "Writing boot sector" > /tmp/.install_state progress 99 @@ -245,8 +272,8 @@ function upgrade () { echo "Configuring system" > /tmp/.install_state progress sleep 1 - cp /etc/mtab "$mountpoint"/etc/mtab - cp -f /etc/systemconfig "$mountpoint"/etc + cp_and_log /etc/mtab "$mountpoint"/etc/mtab + cp_and_log /etc/systemconfig "$mountpoint"/etc #make sure mythconverg.sql.gz is present backup_sql_check if [ $? = 1 ] @@ -261,7 +288,8 @@ function upgrade () { $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost SE=$TEMPLATES/settings/syssettings mkdir -p ${mountpoint}$SE - cp -rp $SE/* ${mountpoint}$SE/ + #cp -rfp $SE/* ${mountpoint}$SE/ + cp_and_log "$SE/*" "${mountpoint}$SE/" chown root:mythtv "$mountpoint"/etc/systemconfig chown -R mythtv:mythtv ${mountpoint}$SE chmod -R 775 ${mountpoint}$SE @@ -273,7 +301,7 @@ function upgrade () { - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/ chmod -R 755 ${mountpoint}/root chown root:mythtv "$mountpoint"/etc/systemconfig chmod 775 "$mountpoint"/etc/systemconfig @@ -293,7 +321,10 @@ function upgrade () { echo "--------------------------------" echo "clean upgrade installing new database" echo "--------------------------------" - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out + chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out + echo "############################################" + echo "End Installing new database/clean" + echo "############################################" else #proceed as normal if [ -f "$mountpoint"/$BACKUPFILE ] @@ -301,13 +332,19 @@ function upgrade () { echo "--------------------------------" echo "Restoring database" echo "--------------------------------" - chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" "$BACKUPFILE" > /tmp/chrootdb_km.out + chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" "$BACKUPFILE" |tee /tmp/chrootdb_km.out + echo "############################################" + echo "End Restoring database" + echo "############################################" else echo "--------------------------------" echo "Couldn't find backup file, installing new database" echo "--------------------------------" touch /tmp/.upgrade_db_failed - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out + chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out + echo "############################################" + echo "End Installing new database" + echo "############################################" fi fi @@ -326,14 +363,14 @@ function upgrade () { chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install apply_new_auth - - umount "$mountpoint/dev" - umount "$mountpoint/proc" + kill_dhcp_chroot + umount -l "$mountpoint/dev" + umount -l "$mountpoint/proc" echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ + cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/ - $run unmount_it $disk + $run umount_it $disk /etc/rc.d/mysqld start } @@ -349,22 +386,22 @@ function netboot-full_install () { ${MV_ROOT}/bin/xconfig.sh } -function killdhcp () { -if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] - then - pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /etc/dhcpc/dhcpcd-eth0.pid - rm -f /var/run/dhcpcd* - fi -if [ -f /var/run/dhcpcd-eth0.pid ] - then - pid=`cat /var/run/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /var/run/dhcpcd-eth0.pid* - fi -ip address flush dev eth0 -} +# function killdhcp () { +# if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] +# then +# pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` +# kill -9 $pid +# rm -f /etc/dhcpc/dhcpcd-eth0.pid +# rm -f /var/run/dhcpcd* +# fi +# if [ -f /var/run/dhcpcd-eth0.pid ] +# then +# pid=`cat /var/run/dhcpcd-eth0.pid` +# kill -9 $pid +# rm -f /var/run/dhcpcd-eth0.pid* +# fi +# ip address flush dev eth0 +# } @@ -402,17 +439,17 @@ echo "-----------------------------------------------------------------------3-- then ###########ADD templates mkdir -p $TEMP_TEMPLATES - cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES + cp_and_log /new_boot/$TEMPLATES $TEMP_TEMPLATES SANE_SYSETTINGS - cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/ - cp /new_boot/etc/systemconfig /etc/systemconfig - cp -rf /new_boot/etc /tmp/etc - cp -rf /new_boot/var/lib/oss /tmp/oss - [ -e /tmp/etc/mdadm.conf ] && cp -rf /tmp/etc/mdadm.conf /etc/ + cp_and_log $TEMP_TEMPLATES/settings $TEMPLATES/ + cp_and_log /new_boot/etc/systemconfig /etc/systemconfig + cp_and_log /new_boot/etc /tmp/etc + cp_and_log /new_boot/var/lib/oss /tmp/oss + [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 else - cp -rf /new_boot/etc /tmp/etc - [ -e /tmp/etc/mdadm.conf ] && cp -rf /tmp/etc/mdadm.conf /etc/ + cp_and_log /new_boot/etc /tmp/etc + [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/ #now we search for the timezone and try to update TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1` TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -` diff --git a/abs/core-testing/LinHES-config/networkconfig.sh b/abs/core-testing/LinHES-config/networkconfig.sh index 5611265..38b819a 100644 --- a/abs/core-testing/LinHES-config/networkconfig.sh +++ b/abs/core-testing/LinHES-config/networkconfig.sh @@ -8,7 +8,8 @@ ETCNETDIR=$BASE/etc/net/ifaces function kill_dhcp () { -for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid +#for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid +for i in ${BASE}/var/run/dhcpcd-*.pid do if [ -f ${i} ] then @@ -33,6 +34,23 @@ done } +function kill_dhcp_chroot () +{ +#for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid +for i in ${mountpoint}/var/run/dhcpcd-*.pid +do + if [ -f ${i} ] + then + pid=`cat ${i}` + kill -9 $pid + rm -f ${i} + fi +done + +} + + + function setup_nameserver(){ grep -q $1 ${BASE}/etc/resolv.conf status=$? diff --git a/abs/core-testing/LinHES-config/restore_km_db_chroot.sh b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh index 7ff6faf..71328f2 100644 --- a/abs/core-testing/LinHES-config/restore_km_db_chroot.sh +++ b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh @@ -1,8 +1,8 @@ #!/bin/bash . /etc/profile . /etc/systemconfig -set -x -#myhost=`cat /etc/hostname` +. $MV_ROOT/bin/install_functions.sh + myhost=$hostname hostname $myhost mount -t proc none /proc @@ -35,6 +35,8 @@ if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] echo "restoring old database" gunzip -c $DBFILE > /tmp/mythconverg.sql mysql mythconverg < /tmp/mythconverg.sql + update_db_settings HostServiceMythWEB "1" + echo 'UseMythWEB="1"' >> /etc/systemconfig else echo "Could not restore old database, mythconverg.sql is missing." touch /tmp/.upgrade_db_failed @@ -52,7 +54,7 @@ if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] exit 0 fi -#/etc/rc.d/mysqld stop +/etc/rc.d/mysqld stop #umount /proc diff --git a/abs/core-testing/LinHES-config/systemconfig.sh b/abs/core-testing/LinHES-config/systemconfig.sh index 3aac497..948137a 100755 --- a/abs/core-testing/LinHES-config/systemconfig.sh +++ b/abs/core-testing/LinHES-config/systemconfig.sh @@ -41,6 +41,17 @@ else fi +function cp_and_log () { + if [ -e $1 ] + then + echo "copying $1 to $2" + cp -rfp "$1" "$2" + else + echo "$1 is not present, skipping..." + fi + +} + #----------------------------------------------------- @@ -55,14 +66,14 @@ function setupmysql { # dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + cp_and_log /tmp/systemconfig.old ${BASE}/etc/systemconfig ##logic to change master_serverip and backend_serverip in db ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost else dbhost=$MYTHIP sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + cp_and_log /tmp/systemconfig.old ${BASE}/etc/systemconfig #logic to change dbhost in db ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost fi @@ -96,7 +107,7 @@ function setupmysql { rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt if [ -f ${BASE}/home/mythtv/templates/mysql.txt ] then - cp ${BASE}/home/mythtv/templates/mysql.txt $MYSQLTXT + cp_and_log ${BASE}/home/mythtv/templates/mysql.txt $MYSQLTXT fi chmod 755 $MYSQLTXT @@ -151,7 +162,7 @@ ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock -cp $TEMPLATES/rc.conf /etc/rc.conf +cp_and_log $TEMPLATES/rc.conf /etc/rc.conf } @@ -173,7 +184,7 @@ function setupreceiver { Hauppauge) echo "setup hauppauge reciever (lirc_i2c)" sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage echo "lirc_i2c #lirc" >> ${BASE}/etc/modules.mythvantage - cp $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf + cp_and_log $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf rmmod lirc_i2c 2>/dev/null load-modules-mythvantage.sh ;; @@ -198,7 +209,7 @@ function setupremote { do cat $i >> ${BASE}/etc/lircd.conf done - cp -f lircrc* $BASE/etc/lircrc 2> /dev/null + cp -f lircrc* $BASE/etc/lircrc 2> /dev/null if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] then cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc @@ -258,7 +269,7 @@ function setupevrouter { x ) echo "empty evrouter" ;; * ) echo "setup evrouter for $EvrouterConfig " - cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg + cp_and_log $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg daemon_add="evrouter Xvfb $daemon_remove" ;; @@ -296,7 +307,7 @@ function setupLCD { if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] then - cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc + cp_and_log $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc # install="lcdproc $install" daemon_add="lcdd $daemon_add" load-modules-mythvantage.sh @@ -316,7 +327,7 @@ function setupLCD { function scrubnfs { - cp /etc/fstab $TEMPLATES/fstab.conf.template + cp_and_log /etc/fstab $TEMPLATES/fstab.conf.template grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab } @@ -341,8 +352,11 @@ function setupncidclient } function setupnciddaemon { - cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template - sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf + if [ x$Runncidd = x1 ] + then + cp_and_log /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template + sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf + fi } @@ -454,12 +468,14 @@ then fi for i in $remove do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] + if [ ! x$i = xnone ] then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` if [ $? = 0 ] then if [ $i = "mythweb$postfix" ] @@ -471,31 +487,35 @@ fi echo removed $i fi fi - else - echo "$i is black listed" + else + echo "$i is black listed" + fi fi done - # fi + for i in $install do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] + if [ ! x$i = xnone ] then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` - # echo $VAR |grep -vq error: + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` + # echo $VAR |grep -vq error: - if [ ! $? = 0 ] - then - pacman --noconfirm -Sf $i - echo installed $i - else - echo "$i already installed" - fi - else - echo "$i is black listed" + if [ ! $? = 0 ] + then + pacman --noconfirm -Sf $i + echo installed $i + else + echo "$i already installed" + fi + else + echo "$i is black listed" + fi fi done } @@ -942,7 +962,13 @@ function reloadfe(){ then killall -9 mythlcdserver fi - kill -s USR1 $PID + if [ x = x$PID ] + then + echo "Mythfrontend not running, will not reload" + else + kill -s USR1 $PID + fi + exit 0 } diff --git a/abs/core-testing/LinHES-config/xconfig.sh b/abs/core-testing/LinHES-config/xconfig.sh index db03e6f..ef3e836 100755 --- a/abs/core-testing/LinHES-config/xconfig.sh +++ b/abs/core-testing/LinHES-config/xconfig.sh @@ -12,8 +12,9 @@ function Xvalues { VGACARDTYPE=vesa else VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2` - CARDID=`lspci -n |grep 10de | cut -d" " -f3 |cut -d: -f2 ` - VENDORID=`lspci -n |grep 10de | cut -d" " -f3 |cut -d: -f1` + VGAPCIID=`lspci|grep -i vga|sort -r|head -n 1| cut -d" " -f1` + CARDID=`lspci -n |grep $VGAPCIID|grep 10de | cut -d" " -f3 |cut -d: -f2 ` + VENDORID=`lspci -n |grep $VGAPCIID|grep 10de | cut -d" " -f3 |cut -d: -f1` fi echo $VGACARDTYPE currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '` @@ -142,9 +143,9 @@ echo "#doing the advanced" > /tmp/options HS="#Hsync edid used " VR="#Vertrefresh edid used " fi - + echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options - + sed -e "s/^.*Modes.*$/\t $ML/" \ -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ -e "s/^.*DisplaySize.*$/ $DS/" \ @@ -175,13 +176,14 @@ function setupX { #nvidia check right here grep -q $CARDID $NVIDIA_96XX if [ $? = 0 ] - then + then #install 96xx drivers - echo "installing nvidia 96xx drivers" + echo "installing nvidia 96xx drivers" pacman --noconfirm -R libgl-dri > /dev/null 2>&1 pacman --noconfirm -S nvidia-96xx nvidia-96xx-utils > /dev/null 2>&1 else #install latest drivers + echo "installing current nvidia drivers" pacman --noconfirm -R libgl-dri > /dev/null 2>&1 pacman --noconfirm -S nvidia nvidia-utils > /dev/null 2>&1 fi @@ -214,7 +216,7 @@ function setupX { *) XCONF=/root/xorg.conf.new X -configure grep -v Modes $XCONF | sed -e '/Depth.*16/a Modes "800x600"' -e '/Depth.*24/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF - rm -f $XCONF 2>&1 > /dev/null + rm -f $XCONF 2>&1 > /dev/null ;; esac fi |