diff options
Diffstat (limited to 'abs')
| -rw-r--r-- | abs/core-testing/libavc1394/PKGBUILD | 22 | ||||
| -rw-r--r-- | abs/core-testing/libdc1394/PKGBUILD | 21 | ||||
| -rw-r--r-- | abs/core-testing/libiec61883/PKGBUILD | 23 | ||||
| -rw-r--r-- | abs/core-testing/libraw1394/PKGBUILD | 23 | ||||
| -rw-r--r-- | abs/core-testing/setserial/PKGBUILD | 22 | ||||
| -rw-r--r-- | abs/core-testing/setserial/setserial.patch | 28 | ||||
| -rw-r--r-- | abs/extra-testing/lm_sensors/PKGBUILD | 41 | ||||
| -rw-r--r-- | abs/extra-testing/lm_sensors/fancontrol.rc | 34 | ||||
| -rw-r--r-- | abs/extra-testing/lm_sensors/sensors-detect.patch | 61 | ||||
| -rw-r--r-- | abs/extra-testing/lm_sensors/sensors.install | 12 | ||||
| -rw-r--r-- | abs/extra-testing/lm_sensors/sensors.rc | 127 | ||||
| -rw-r--r-- | abs/extra-testing/lynx/PKGBUILD | 23 |
12 files changed, 437 insertions, 0 deletions
diff --git a/abs/core-testing/libavc1394/PKGBUILD b/abs/core-testing/libavc1394/PKGBUILD new file mode 100644 index 0000000..6972eca --- /dev/null +++ b/abs/core-testing/libavc1394/PKGBUILD @@ -0,0 +1,22 @@ +# $Id: PKGBUILD 8934 2008-08-17 00:56:51Z eric $ +# Maintainer: damir <damir@archlinux.org> +# Contributor: Robert Emil Berge <robert@rebi.no> + +pkgname=libavc1394 +pkgver=0.5.3 +pkgrel=1 +pkgdesc="A library to control A/V devices using the 1394ta AV/C commands." +arch=("i686" "x86_64") +url="http://sourceforge.net/projects/libavc1394/" +depends=('libraw1394') +options=('!libtool') +source=(http://dl.sourceforge.net/sourceforge/libavc1394/$pkgname\-$pkgver.tar.gz) +md5sums=('09e30b1fb5ae455b6d8407e457a711a3') + +build() { + cd $startdir/src/$pkgname-$pkgver + ./configure --prefix=/usr + make || return 1 + make DESTDIR=$startdir/pkg install +} + diff --git a/abs/core-testing/libdc1394/PKGBUILD b/abs/core-testing/libdc1394/PKGBUILD new file mode 100644 index 0000000..31e5c6b --- /dev/null +++ b/abs/core-testing/libdc1394/PKGBUILD @@ -0,0 +1,21 @@ +# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $ +# Maintainer: Jan de Groot <jgc@archlinux.org> + +pkgname=libdc1394 +pkgver=2.0.1 +pkgrel=1 +pkgdesc="High level programming interface to control IEEE 1394 based cameras" +arch=(i686 x86_64) +license=('LGPL') +depends=('libraw1394>=1.3.0') +options=(!libtool !emptydirs) +source=(http://downloads.sourceforge.net/sourceforge/libdc1394/${pkgname}-${pkgver}.tar.gz) +url="http://sourceforge.net/projects/libdc1394/" +md5sums=('6b5abeed347e7f6682f4fa9f06437a5f') + +build() { + cd ${startdir}/src/${pkgname}-${pkgver} + ./configure --prefix=/usr || return 1 + make || return 1 + make DESTDIR=${startdir}/pkg install || return 1 +} diff --git a/abs/core-testing/libiec61883/PKGBUILD b/abs/core-testing/libiec61883/PKGBUILD new file mode 100644 index 0000000..f0ca6ea --- /dev/null +++ b/abs/core-testing/libiec61883/PKGBUILD @@ -0,0 +1,23 @@ +# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $ +# Maintainer: Jason Chu <jason@archlinux.org> +# Contributor: Jaroslaw Swierczynski <swiergot@juvepoland.com> +# Contributor: Stephen Caraher <moskvax@gmail.com> + +pkgname=libiec61883 +pkgver=1.1.0 +pkgrel=1 +pkgdesc="A higher level API for streaming DV, MPEG-2 and audio over Linux IEEE 1394" +arch=('i686' 'x86_64') +url="http://www.linux1394.org/" +license=('LGPL') +depends=('libraw1394') +options=('!libtool') +source=(http://www.linux1394.org/dl/$pkgname-$pkgver.tar.gz) +md5sums=('08f46840912ae2032499186228842a32') + +build() { + cd $startdir/src/$pkgname-$pkgver + ./configure --prefix=/usr + make || return 1 + make DESTDIR=$startdir/pkg install +} diff --git a/abs/core-testing/libraw1394/PKGBUILD b/abs/core-testing/libraw1394/PKGBUILD new file mode 100644 index 0000000..c4faf49 --- /dev/null +++ b/abs/core-testing/libraw1394/PKGBUILD @@ -0,0 +1,23 @@ +# $Id: PKGBUILD 13741 2008-09-28 13:27:16Z giovanni $ +# Maintainer: Giovanni Scafora <giovanni@archlinux.org> +# Contributor: Tom Newsom <Jeepster@gmx.co.uk> + +pkgname=libraw1394 +pkgver=1.3.0 +pkgrel=2 +arch=('i686' 'x86_64') +license=('LGPL') +pkgdesc="Provides an API to the Linux IEEE1394 (FireWire) driver" +depends=('glibc') +makedepends=('pkgconfig') +url="http://www.linux1394.org/" +options=(!libtool force) +source=(http://www.linux1394.org/dl/${pkgname}-${pkgver}.tar.gz) +md5sums=('c5d9ab62bd25dba96af010b3471e816a') + +build() { + cd ${startdir}/src/${pkgname}-${pkgver} + ./configure --prefix=/usr + make || return 1 + make DESTDIR=${startdir}/pkg install +} diff --git a/abs/core-testing/setserial/PKGBUILD b/abs/core-testing/setserial/PKGBUILD new file mode 100644 index 0000000..acab19d --- /dev/null +++ b/abs/core-testing/setserial/PKGBUILD @@ -0,0 +1,22 @@ +# $Id: PKGBUILD 356 2008-04-18 22:56:27Z aaron $ +# Maintainer: aurelien <aurelien@archlinux.org> +# Contributor: Aurelien Foret <orelien@chez.com> +pkgname=setserial +pkgver=2.17 +pkgrel=2 +pkgdesc="Allows to change various attributes of a serial device." +url="http://setserial.sourceforge.net/" +depends=('glibc') + +arch=(i686) +source=(http://dl.sourceforge.net/sourceforge/$pkgname/$pkgname-$pkgver.tar.gz $pkgname.patch) +md5sums=('c4867d72c41564318e0107745eb7a0f2' '99919d3be7c1550721494070a7ace66a') + +build() { + cd $startdir/src/$pkgname-$pkgver + patch -Np1 -i ../$pkgname.patch + ./configure --prefix=/usr + make || return 1 + mkdir -p $startdir/pkg/usr/{bin,man/man8} + make DESTDIR=$startdir/pkg install +} diff --git a/abs/core-testing/setserial/setserial.patch b/abs/core-testing/setserial/setserial.patch new file mode 100644 index 0000000..3cce1f0 --- /dev/null +++ b/abs/core-testing/setserial/setserial.patch @@ -0,0 +1,28 @@ +diff -ur setserial-2.17/Makefile.in setserial-2.17-new/Makefile.in +--- setserial-2.17/Makefile.in 2000-01-27 16:39:07.000000000 +0100 ++++ setserial-2.17-new/Makefile.in 2005-03-09 20:53:31.000000000 +0100 +@@ -17,6 +17,11 @@ + INCS = -I. + TAR = tar + ++prefix=@prefix@ ++exec_prefix=@exec_prefix@ ++bindir=@bindir@ ++mandir=@mandir@ ++ + all: setserial setserial.cat + + setserial: setserial.c +@@ -26,9 +31,9 @@ + nroff -man setserial.8 > setserial.cat + + install: setserial setserial.8 +- $(INSTALL_PROGRAM) setserial $(DESTDIR)/bin +- $(STRIP) $(DESTDIR)/bin/setserial +- $(INSTALL_DATA) setserial.8 $(DESTDIR)/usr/man/man8 ++ $(INSTALL_PROGRAM) setserial $(DESTDIR)$(bindir) ++ $(STRIP) $(DESTDIR)$(bindir)/setserial ++ $(INSTALL_DATA) setserial.8 $(DESTDIR)$(mandir)/man8 + + clean: + $(RM) setserial setserial.o setserial.cat *~ diff --git a/abs/extra-testing/lm_sensors/PKGBUILD b/abs/extra-testing/lm_sensors/PKGBUILD new file mode 100644 index 0000000..487a6fe --- /dev/null +++ b/abs/extra-testing/lm_sensors/PKGBUILD @@ -0,0 +1,41 @@ +# $Id: PKGBUILD 8687 2008-08-15 15:06:46Z andyrtr $ +# Maintainer: aurelien <aurelien@archlinux.org> +# Contributor: Aurelien Foret <orelien@chez.com> +pkgname=lm_sensors +pkgver=3.0.2 +pkgrel=2 +pkgdesc="Collection of user space tools for general SMBus access and hardware monitoring." +arch=('i686' 'x86_64') +license=('GPL') +depends=('perl' 'sysfsutils') +makedepends=('bison' 'flex' 'rrdtool') +optdepends=('rrdtool: for logging with sensord') +backup=(etc/sensors3.conf) +install=sensors.install +source=(http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-$pkgver.tar.bz2 + sensors.rc + fancontrol.rc + sensors-detect.patch) +url="http://www.lm-sensors.org/" +md5sums=('5b210ba9cc01f00161c438fd618484e5' + 'c9f7f38964963ae3ced4dff3f1f0b7b9' + 'f14e335a8eea27388892c36af8099782' + '6fd30ed1e5ac739b8a27f3913ba706f4') + +build() { + cd ${srcdir}/$pkgname-$pkgver + patch -Np0 -i ${srcdir}/sensors-detect.patch || return 1 + + make PREFIX=/usr PROG_EXTRA:=sensord user || return 1 + make user_install PREFIX=/usr DESTDIR=${pkgdir} + install -DT -m755 ${srcdir}/$pkgname-$pkgver/prog/sensord/sensord ${pkgdir}/usr/sbin/sensord + + install -DT -m755 ${srcdir}/sensors.rc ${pkgdir}/etc/rc.d/sensors + install -DT -m755 ${srcdir}/fancontrol.rc ${pkgdir}/etc/rc.d/fancontrol + + # remove the static lib + rm -rf ${pkgdir}/usr/lib/libsensors.a + + # FIXME: avoid conflicts with glibc headers + rm -rf ${pkgdir}/usr/include/linux +} diff --git a/abs/extra-testing/lm_sensors/fancontrol.rc b/abs/extra-testing/lm_sensors/fancontrol.rc new file mode 100644 index 0000000..7fc1bbf --- /dev/null +++ b/abs/extra-testing/lm_sensors/fancontrol.rc @@ -0,0 +1,34 @@ +#!/bin/bash + +. /etc/rc.conf +. /etc/rc.d/functions + +case "$1" in + start) + stat_busy "Starting fancontrol" + /usr/sbin/fancontrol >/dev/null 2>&1 & + if [ $? -gt 0 ]; then + stat_fail + else + add_daemon fancontrol + stat_done + fi + ;; + stop) + stat_busy "Stopping fancontrol" + [ -f /var/run/fancontrol.pid ] && kill `cat /var/run/fancontrol.pid` + if [ $? -gt 0 ]; then + stat_fail + else + rm_daemon fancontrol + stat_done + fi + ;; + restart) + $0 stop + $0 start + ;; + *) + echo "usage: $0 {start|stop|restart}" +esac +exit 0 diff --git a/abs/extra-testing/lm_sensors/sensors-detect.patch b/abs/extra-testing/lm_sensors/sensors-detect.patch new file mode 100644 index 0000000..981ed3d --- /dev/null +++ b/abs/extra-testing/lm_sensors/sensors-detect.patch @@ -0,0 +1,61 @@ +--- prog/detect/sensors-detect.orig 2008-02-07 20:59:25.125302226 +0100 ++++ prog/detect/sensors-detect 2008-02-07 21:06:53.821929489 +0100 +@@ -5879,21 +5879,21 @@ + } + } + +- my $have_sysconfig = -d '/etc/sysconfig'; +- printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ", +- (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'), ++ my $have_sysconfig = -d '/etc/conf.d'; ++ printf "Do you want to \%s /etc/conf.d/lm_sensors? (\%s): ", ++ (-e '/etc/conf.d/lm_sensors' ? 'overwrite' : 'generate'), + ($have_sysconfig ? 'YES/no' : 'yes/NO'); + $_ = <STDIN>; + if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) { + unless ($have_sysconfig) { +- mkdir '/etc/sysconfig', 0777 +- or die "Sorry, can't create /etc/sysconfig ($!)"; ++ mkdir '/etc/conf.d', 0777 ++ or die "Sorry, can't create /etc/conf.d ($!)"; + } +- open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors") +- or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)"; ++ open(local *SYSCONFIG, ">/etc/conf.d/lm_sensors") ++ or die "Sorry, can't create /etc/conf.d/lm_sensors ($!)"; + print SYSCONFIG <<'EOT'; +-# /etc/sysconfig/lm_sensors - Defines modules loaded by +-# /etc/init.d/lm_sensors ++# /etc/conf.d/lm_sensors - Defines modules loaded by ++# /etc/rc.d/sensors + # Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl> + # + # This program is free software; you can redistribute it and/or modify +@@ -5914,8 +5914,8 @@ + # See also the lm_sensors homepage at: + # http://www.lm-sensors.org/ + # +-# This file is used by /etc/init.d/lm_sensors and defines the modules to +-# be loaded/unloaded. This file is sourced into /etc/init.d/lm_sensors. ++# This file is used by /etc/rc.d/sensors and defines the modules to ++# be loaded/unloaded. This file is sourced into /etc/rc.d/sensors. + # + # The format of this file is a shell script that simply defines the modules + # in order as normal variables with the special names: +@@ -5952,12 +5952,12 @@ + print SYSCONFIG $sysconfig; + close(SYSCONFIG); + +- print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n". ++ print "Copy prog/init/lm_sensors.init to /etc/rc.d/sensors\n". + "for initialization at boot time.\n" +- unless -f "/etc/init.d/lm_sensors"; ++ unless -f "/etc/rc.d/sensors"; + +- if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") { +- system("/sbin/insserv", "/etc/init.d/lm_sensors"); ++ if (-x "/sbin/insserv" && -f "/etc/rc.d/sensors") { ++ system("/sbin/insserv", "/etc/rc.d/sensors"); + } elsif (-x "/sbin/chkconfig" && -f "/etc/init.d/lm_sensors") { + system("/sbin/chkconfig", "lm_sensors", "on"); + if (-x "/sbin/service") { diff --git a/abs/extra-testing/lm_sensors/sensors.install b/abs/extra-testing/lm_sensors/sensors.install new file mode 100644 index 0000000..d593f84 --- /dev/null +++ b/abs/extra-testing/lm_sensors/sensors.install @@ -0,0 +1,12 @@ +post_install() { + echo ">>> to control the lm_sensors daemon type" + echo ">>> \"/etc/rc.d/sensors start|stop|restart\" " + echo ">>> --------------------------------------" + echo ">>> before you can use the fancontrol daemon" + echo ">>> first create a fancontrol config file, use \"pwmconfig\"" + echo ">>> then type \"/etc/rc.d/fancontrol start|stop|restart\" " + echo ">>> --------------------------------------" + echo ">>> to decode memory SPD timings modprobe eeprom module" + echo ">>> and get this perl script from" + echo ">>> \"http://www.lm-sensors.org/browser/lm-sensors/trunk/prog/eeprom/decode-dimms.pl\"" +} diff --git a/abs/extra-testing/lm_sensors/sensors.rc b/abs/extra-testing/lm_sensors/sensors.rc new file mode 100644 index 0000000..aa086eb --- /dev/null +++ b/abs/extra-testing/lm_sensors/sensors.rc @@ -0,0 +1,127 @@ +#!/bin/bash +# +# chkconfig: 2345 26 74 +# description: sensors is used for monitoring motherboard sensor values. +# config: /etc/sysconfig/sensors +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +# See also the lm_sensors homepage at: +# http://www2.lm-sensors.nu/~lm78/index.html + +# It uses a config file /etc/sysconfig/sensors that contains the modules to +# be loaded/unloaded. That file is sourced into this one. + +# The format of that file a shell script that simply defines the modules +# in order as normal shell variables with the special names: +# MODULE_1, MODULE_2, MODULE_3, etc. + +. /etc/rc.conf +. /etc/rc.d/functions + +if grep -q sysfs /proc/mounts; then + WITHSYS=1 +else + WITHSYS=0 +fi + +CONFIG=/etc/conf.d/lm_sensors +PSENSORS=/usr/bin/sensors +if [ ! -x $PSENSORS ]; then + PSENSORS=/usr/bin/sensors +fi + +case "$1" in + start) + stat_busy "Starting Up Sensors" + + if [ $WITHSYS == "0" ]; then + # If sensors isn't supported by the kernel, try loading the module... + [ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null + + # Don't bother if /proc/sensors still doesn't exist, kernel doesn't have + # support for sensors. + [ -e /proc/sys/dev/sensors ] || exit 0 + + # If sensors was not already running, unload the module... + [ -e /var/lock/subsys/lm_sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null + fi + + + if [ -r "$CONFIG" ]; then + . "$CONFIG" + modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '` + i=0 + while [ $i -lt $modules ] ; do + module=`eval echo '$'MODULE_$i` + #echo starting module __${module}__ #debug + /sbin/modprobe $module &>/dev/null + i=`expr $i + 1` + done + fi + $PSENSORS -s + + if [ $? -gt 0 ]; then + stat_fail + else + add_daemon sensors + stat_done + fi + ;; + + stop) + stat_busy "Shutting Down Sensors" + + if [ -r "$CONFIG" ]; then + . "$CONFIG" + modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '` + i=`expr $modules` + while [ $i -ge 0 ] ; do + module=`eval echo '$'MODULE_$i` + /sbin/modprobe -r $module &>/dev/null + i=`expr $i - 1` + done + fi + + if [ $WITHSYS == "0" ]; then + /sbin/modprobe -r i2c-proc &>/dev/null + fi + + if [ $? -gt 0 ]; then + stat_fail + else + rm_daemon sensors + stat_done + fi + ;; + + dostatus) + $PSENSORS + RETVAL=$? + ;; + + restart) + $0 stop + sleep 1 + $0 start + ;; + + condrestart) + [ -e /var/lock/subsys/lm_sensors ] && restart || : + ;; + + *) + echo "Usage: sensors.init {start|stop|status|restart|reload|condrestart}" +esac diff --git a/abs/extra-testing/lynx/PKGBUILD b/abs/extra-testing/lynx/PKGBUILD new file mode 100644 index 0000000..326e3ee --- /dev/null +++ b/abs/extra-testing/lynx/PKGBUILD @@ -0,0 +1,23 @@ +# $Id: PKGBUILD 9279 2008-08-17 05:59:10Z allan $ +# Maintainer: dorphell <dorphell@archlinux.org> +# Contributor: Tom Newsom <Jeepster@gmx.co.uk> +pkgname=lynx +pkgver=2.8.6 +pkgrel=2 +pkgdesc="A text browser for the World Wide Web" +url="http://lynx.isc.org/" +arch=(i686 x86_64) +license=('GPL') +depends=('ncurses' 'openssl') +source=(http://lynx.isc.org/release/${pkgname}${pkgver}.tar.gz) +url="http://lynx.isc.org" +backup=('etc/lynx.cfg') +md5sums=('c1346198ae99302cc26763d89f89a239') + +build() { + cd $startdir/src/${pkgname}2-8-6 + ./configure --prefix=/usr --sysconfdir=/etc --with-ssl --enable-nls \ + --mandir=/usr/share/man + make || return 1 + make DESTDIR=$startdir/pkg install +} |