diff options
Diffstat (limited to 'abs')
122 files changed, 231 insertions, 19850 deletions
diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD index 7bd6369..936b159 100755 --- a/abs/core-testing/LinHES-config/PKGBUILD +++ b/abs/core-testing/LinHES-config/PKGBUILD @@ -1,12 +1,12 @@ pkgname=LinHES-config -pkgver=1.0 -pkgrel=430 +pkgver=2.0 +pkgrel=8 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) pkgdesc="Install and configure your system" depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan system-templates rsync python-parted ) arch=('i686') -source=(mv_install.py mv_config.py mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh README ir_config.sh mv_advanced.py mv_common.py mv_ir.py mv_misc.py mv_network.py mv_screensaver.py mv_smolt.py mv_software.py mv_webuser.py mv_hostype.py systemconfig.py) +source=(mv_install.py mv_config.py mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh README mv_advanced.py mv_common.py mv_ir.py mv_misc.py mv_network.py mv_screensaver.py mv_smolt.py mv_software.py mv_webuser.py mv_hostype.py systemconfig.py) install=LinHES.install build() { @@ -25,7 +25,6 @@ build() { install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh - install -m 0755 ir_config.sh $MVDIR/bin/ir_config.sh install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh index 808dbb9..94305d2 100755..100644 --- a/abs/core-testing/LinHES-config/install_db_chroot.sh +++ b/abs/core-testing/LinHES-config/install_db_chroot.sh @@ -6,112 +6,58 @@ myhost=$hostname hostname $myhost echo $myhost > /etc/hostname -echo "$0 hostname is $hostname" +echo "install_db_chroot hostname is $hostname" . $MV_ROOT/bin/install_functions.sh #myhost=`cat /etc/hostname` -# Before this script is called, the mysqld that facilitated the installation is killed. -# We need to make sure to stop and start the mysqld that will be used post-install so -# that the database can be initialized. - -/etc/rc.d/mysqld stop -killall -9 mysqld -/etc/rc.d/mysqld start -sleep 1 - -# Put a limit on how many times we try to (re-)start MySQL -success_test() { - # parameter: number of tries to start mysqld so far - PID=`pidof -o %PPID /usr/sbin/mysqld` - if [ -z "$PID" ]; then # mysqld isn't running - if [ $1 -gt 3 ]; then - echo "ERROR: Failed to start MySQL server in $1 attempts." - sleep 5 - exit 1 - else - echo "Tried $1 time(s) to start MySQL server." - return 1 - fi - else # mysqld is running - return 0 - fi - # should never get here - return 1 -} - -mysqld_tries=0 -# See if MySQL server is running; try several ways to start it if it's not. -while true; do - success_test $mysqld_tries - if [ $? -eq 0 ]; then - echo "MySQL server is running" - break - else - echo "MySQL server is not running. Trying to start it." - # Maybe it just needs to be started - sleep 1 - /etc/rc.d/mysqld start - mysqld_tries=$((mysqld_tries + 1)) - success_test $mysqld_tries - if [ $? -eq 0 ]; then - echo "MySQL server has been started" - break - else - echo "MySQL server may not be installed. Trying to install it." - # Maybe it's not installed; try (re-)installing it and starting it - sleep 1 - pacman --noconfirm -Sf mysql - sleep 1 - /etc/rc.d/mysqld start - mysqld_tries=$((mysqld_tries + 1)) - success_test $mysqld_tries - if [ $? -eq 0 ]; then - echo "MySQL server has been installed and started" - break - else - echo "MySQL server would not start, even after (re-)installing it." - fi - fi - fi -done - -# At this point, MySQL server should be up and running - -while true; do - mysql -e "show databases;" - - if [ $? -eq 0 ]; then - pacman --noconfirm -R mythdb-initial - pacman --noconfirm -S mythdb-initial - $MV_ROOT/bin/restore_default_settings.sh -c load - DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install - - update_db_settings HostServiceMythWEB "1" - echo 'UseMythWEB="1"' >> /etc/systemconfig - - #update database to allow user jobs on this host. - $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW - $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - #if [ -d /var/lib/mysql/mythconverg ] - if [ -d /data/srv/mysql/mythconverg ]; then +#mount -t proc none /proc +pacman --noconfirm -Sf mysql +/etc/rc.d/mysqld + +status=1 +mysqlstatus=1 +while [ ! $status = 0 ] +do + /etc/rc.d/mysqld stop + sleep 1 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + $MV_ROOT/bin/restore_default_settings.sh -c load + DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 + $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install + + update_db_settings HostServiceMythWEB "1" + echo 'UseMythWEB="1"' >> /etc/systemconfig + + #update database to allow user jobs on this host. + $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW + $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + if [ -d /data/srv/mysql/mythconverg ] + #if [ -d /var/lib/mysql/mythconverg ] + then # pacman --noconfirm -R webcalendar # pacman --noconfirm --nodeps -S webcalendar - break - else - echo "Failed to create mythconverg database. Will re-try." - sleep 1 - fi + status=0 + fi # if [ $SystemType = "Master_backend" ] # then # $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost # fi - else - echo "Failed to look for databases. Will re-try." - sleep 1 + fi fi done /etc/rc.d/mysqld stop #umount /proc + + + diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh index 4d158e7..ef13f6c 100755 --- a/abs/core-testing/LinHES-config/install_proxy.sh +++ b/abs/core-testing/LinHES-config/install_proxy.sh @@ -1,5 +1,4 @@ #!/bin/bash -#chroot and /tmp export TERM=vt100 MVHOSTNAME=larch5 . /etc/profile @@ -17,685 +16,155 @@ run=$MV_ROOT/bin/install_functions.sh CMDLINE=$(cat /proc/cmdline) BACKUPFILE="/myth/backup/mythconverg.sql.gz" -#TEMPNET="Hostip"$default_interface -#eval MYTHIP=\$${TEMPNET} -function create_chroot_mnt_points() { - - echo "Creating directory for media in chroot" - mkdir -p $mountpoint/media/cdrom - mkdir -p $mountpoint/media/dvd - mkdir -p $mountpoint/mnt - -} -function cp_and_log () { - ls $1 >/dev/null 2>&1 - status=$? - if [ $status = 0 ] - then - echo "copying $1 to $2" - cp -rfp $1 $2 - else - echo "$1 is not present, skipping..." - fi - -} - -function mdadm_find () { - - PREFIX=$1 - if [ -e $PREFIX/etc/KnoppMyth-version ] - then - MDADM_CONF="/etc/mdadm/mdadm.conf" - else - MDADM_CONF="/etc/mdadm.conf" - fi - echo "Using $MDADM_CONF" -} progress () { -mypercent=`echo "$1" | cut -d. -f1` -if [ x$mypercent = x ] -then -echo "" > /tmp/.install_percent -else -echo "${mypercent}% complete" > /tmp/.install_percent -fi - - -} - -function apply_new_auth () { -#check if file is present - if [ -f /root/myth_user_call.out ] - then - #read in file, running each command in chroot - exec 4</root/myth_user_call.out - while read LINE <&4 - do - if [ ! x"$LINE" = x ] - then - #run commands in chroot - chroot "$mountpoint" $MV_ROOT/bin/myth_user_call -i $LINE > /tmp/user_auth.update - fi - done - rm -f /root/myth_user_call.out - else - echo "No new password changes to apply" - fi -} - - -function backup_sql_check { - if [ -f ${mountpoint}${BACKUPFILE} ] - then - echo "found ${mountpoint}${BACKUPFILE} " - rc=0 - else - echo "did not find ${mountpoint}${BACKUPFILE} " - rc=1 - fi - return $rc -} - -function mdadm_assemble_all { - - mdadm_find /tmp - mdadm --assemble --scan -c /tmp${MDADM_CONF} - MDLIST=`grep ARRAY /tmp${MDADM_CONF}|tr -s [:space:]|cut -d" " -f2` - for array in $MDLIST - do - echo "assembling array $array" - mdadm --assemble -c /tmp${MDADM_CONF} $array - sleep 2 - fsck -p $array - done - -} - -function upgrade_mount_search { - - MYTH_P=`cat /tmp/etc/fstab |grep -E /myth[[:space:]] | awk ' {print $1 '} ` - umount $mountpoint/myth - - #should probably just mdadm all the time - echo $MYTH_P |grep -q \/md. - if [ $? = 0 ] + mypercent=`echo "$1" | cut -d. -f1` + if [ x$mypercent = x ] then - mdadm_assemble_all - fi - - echo $MYTH_P |grep -q UUID - if [ $? = 0 ] - then - MUUID=`echo $MYTH_P|cut -d= -f2|tr -d \"` - echo blkid $MUUID - blkid -t UUID=$MUUID - if [ ! $? = 0 ] - then - echo "couldn't find $MUUID, starting md support" - mdadm_assemble_all - fi - mount -U $MUUID $mountpoint/myth - echo mount -U $MUUID $mountpoint/myth - MYTHMOUNT=`blkid -t UUID=$MUUID|cut -d: -f1` - MYTHMOUNT=`basename $MYTHMOUNT` - echo "MYTHMOUNT is $MYTHMOUNT" + echo "" > /tmp/.install_percent else - mount $MYTH_P $mountpoint/myth - echo mount $MYTH_P $mountpoint/myth - MYTHMOUNT=`basename $MYTH_P` - echo "MYTHMOUNT is $MYTHMOUNT" - fi - sleep 2 - backup_sql_check - if [ $? = 1 ] - then - mkdir -p /new_boot/root/backup - if [ ! -e /tmp/mythconverg.sql.gz ] - then - echo "Couldn't find ANY database to restore, upgrade will continue but a new database will be installed." - else - cp_and_log /tmp/mythconverg.sql.gz /new_boot/root/backup/mythconverg.sql.gz - BACKUPFILE="/root/backup/mythconverg.sql.gz" - echo "setting BACKUPFILE to $BACKUPFILE" - fi + echo "${mypercent}% complete" > /tmp/.install_percent fi - return 0 } -full_install () { - if [ -f /tmp/.this_is_upgrade ] - then - rm /tmp/.this_is_upgrade - fi - echo "Partitioning $disk" > /tmp/.install_state - progress 1 - sleep 1 - $run partition_it $disk $rootsize $datasize $swapsize - - echo "Formatting $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs $datafs - - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Creating $hostname" > /tmp/.install_state - - sleep 1 - $run copy_it $disk ALL - rm $mountpoint/etc/fstab - $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL - echo "Configuring system" > /tmp/.install_state - progress 100 - #progress 99 - sleep 1 - $run grub_it $disk - - - #echo "Configuring system" > /tmp/.install_state - #progress 100 - sleep 1 - cp_and_log /etc/systemconfig "$mountpoint"/etc - cp_and_log /root/xorg.conf.install "$mountpoint"/etc/X11/xorg.conf.install - #run save syssettings to save settings, then copy to new mountpoint - $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost - SE=$TEMPLATES/settings/syssettings - mkdir -p ${mountpoint}$SE - #cp -rp $SE/* ${mountpoint}$SE/ - cp_and_log "$SE/*" "${mountpoint}$SE/" - chown root:mythtv "$mountpoint"/etc/systemconfig - chown -R mythtv:mythtv ${mountpoint}$SE - - chmod -R 775 ${mountpoint}$SE - chmod 775 "$mountpoint"/etc/systemconfig - mkdir -p "$mountpoint"/var/log/mythtv - chown mythtv "$mountpoint"/var/log/mythtv - #copy over any updates that might have occured - #cp -rp $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ - cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - create_chroot_mnt_points - cp_and_log /etc/mtab "$mountpoint"/etc/mtab - # cp_and_log /etc/hostname "$mountpoint"/etc/hostname - apply_new_auth - - - if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] - then - #installing DB to local machine - #turn off old live database, so the chroot one can start - echo "---------------------CHROOT INSTALLDB-------------------------" - /etc/rc.d/mysqld stop - mount --bind /dev "$mountpoint/dev" - mount --bind /proc "$mountpoint/proc" - mount -t sysfs none $mountpoint/sys - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" 2>&1 |tee /tmp/chrootdb.out - #chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install - echo "stopping mysql in chroot" - chroot "$mountpoint" /etc/rc.d/mysqld stop - kill_dhcp_chroot - sleep 2 - lsof |grep new_boot - umount -l "$mountpoint/dev" - umount -l "$mountpoint/proc" - umount -l "$mountpoint/sys" - - echo "---------------------END CHROOT INSTALLDB-------------------------" - /etc/rc.d/mysqld start - else - #update remotedb with this host settings - mount --bind /dev "$mountpoint/dev" - mount --bind /proc "$mountpoint/proc" - mount -t sysfs none $mountpoint/sys - chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - if [ ! $? = 0 ] - then - touch $mountpoint/tmp/.dbsysfailed - chmod 777 $mountpoint/tmp/.dbsysfailed - else - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - umount -l "$mountpoint/dev" - umount -l "$mountpoint/proc" - umount -l "$mountpoint/sys" - fi - fi - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,user - touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure - - echo "Done" > /tmp/.install_state - cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/ - $run umount_it $disk - -} - -function createsquashlist(){ -if [ -f $1 ] -then - rm -f -$1 -fi -for i in bin boot etc home lib opt root sbin usr var data -do -echo $i >> $1 -done - - -} - - - - -function upgrade () { - touch /tmp/.this_is_upgrade - - if [ ! x$rootfs = "xDo_not_format" ] - then - echo "Formatting - $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs NO - fi - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Upgrading $hostname" > /tmp/.install_state - sleep 1 - cp_and_log /tmp/etc /new_boot/etc.old - cp_and_log /tmp/oss /new_boot/var/lib/oss.old - - - SQUASHLIST="/tmp/.squashlist" - createsquashlist $SQUASHLIST - $run copy_it $disk $SQUASHLIST - #copy back ssh keys - -# cp_and_log -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ - cp_and_log "/new_boot/etc.old/ssh/*.pub" /new_boot/etc/ssh/ - cp_and_log "/new_boot/etc.old/ssh/*.key" /new_boot/etc/ssh/ - cp_and_log "/new_boot/etc.old/ssh/*key" /new_boot/etc/ssh/ - mdadm_find /tmp - cp_and_log /tmp${MDADM_CONF} /new_boot/etc - #cp_and_log /new_boot/etc.old/mdadm/mdadm.conf /new_boot/etc/ - cp_and_log /new_boot/etc.old/asound.state /new_boot/etc/ - if [ ! -f /tmp/etc/KnoppMyth-version ] - then - #passwd/shadow/group - cp_and_log /new_boot/etc.old/passwd /new_boot/etc/ - cp_and_log /new_boot/etc.old/shadow /new_boot/etc/ - cp_and_log /new_boot/etc.old/group /new_boot/etc/ - fi - mkdir -p "$mountpoint"/var/log/mythtv - chown mythtv "$mountpoint"/var/log/mythtv - if [ x$rootfs = "xDo_not_format" ] - then - rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '` - fi - #this is here to copy in the systemconfig file as soon as possible. - cp_and_log /etc/systemconfig "$mountpoint"/etc/systemconfig - echo "Configuring system" > /tmp/.install_state - progress 100 - backup_sql_check - if [ $? = 1 ] - then - upgrade_mount_search - fi - echo $run fstab_fix_it $disk UPGRADE $MYTHMOUNT - $run fstab_fix_it $disk UPGRADE $MYTHMOUNT - create_chroot_mnt_points - - #echo "Writing boot sector" > /tmp/.install_state - #progress 99 - sleep 1 - $run grub_it $disk - #echo "Configuring system" > /tmp/.install_state - #progress 100 - sleep 1 - cp_and_log /etc/mtab "$mountpoint"/etc/mtab - cp_and_log /etc/systemconfig "$mountpoint"/etc - cp_and_log /root/xorg.conf.install "$mountpoint"/etc/X11/xorg.conf.install -#make sure mythconverg.sql.gz is present - #backup_sql_check - #if [ $? = 1 ] - #then - # upgrade_mount_search - #fi - echo $CMDLINE | grep -q clean_upgrade - status=$? - if [ -f /tmp/etc/KnoppMyth-version -o $status = 0 ] - then - #run save syssettings to save settings, then copy to new mountpoint - $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost - SE=$TEMPLATES/settings/syssettings - mkdir -p ${mountpoint}$SE - #cp -rfp $SE/* ${mountpoint}$SE/ - cp_and_log "$SE/*" "${mountpoint}$SE/" - chown root:mythtv "$mountpoint"/etc/systemconfig - chown -R mythtv:mythtv ${mountpoint}$SE - chmod -R 775 ${mountpoint}$SE - if [ ! $status = 0 ] - then - touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade - fi - fi - - - - cp_and_log "$MV_ROOT/bin/*.sh" "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - chown root:mythtv "$mountpoint"/etc/systemconfig - chmod 775 "$mountpoint"/etc/systemconfig - #mount /proc and /dev - mount --bind /dev "$mountpoint/dev" - mount --bind /proc "$mountpoint/proc" - - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install - #wrap this in a network check_network, no need to update the db if the import worked. - ##### do I need to start mysql? - /etc/rc.d/mysqld stop - if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] - then - echo $CMDLINE | grep -q clean_upgrade - status=$? - if [ $status = 0 ] - then - #new db as part of clean upgrade - echo "--------------------------------" - echo "clean upgrade installing new database" - echo "--------------------------------" - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out - echo "############################################" - echo "End Installing new database/clean" - echo "############################################" - else - #proceed as normal - if [ -f "$mountpoint"/$BACKUPFILE ] - then - echo "--------------------------------" - echo "Restoring database with $BACKUPFILE" - echo "--------------------------------" - chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" "$BACKUPFILE" |tee /tmp/chrootdb_km.out - echo "############################################" - echo "End Restoring database" - echo "############################################" - else - echo "--------------------------------" - echo "Couldn't find backup file, installing new database" - echo "--------------------------------" - touch /tmp/.upgrade_db_failed - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" |tee /tmp/chrootdb.out - echo "############################################" - echo "End Installing new database" - echo "############################################" - fi - fi - fi - - if [ -f /tmp/etc/KnoppMyth-version ] - then - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings - #change permissions of /myth (only needed on km->linhes) - chown -R mythtv:mythtv $mountpoint/myth - chown -R root:root $mountpoint/myth/backup - else - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - fi - # - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,user,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install - echo "stopping mysql in chroot" - chroot "$mountpoint" /etc/rc.d/mysqld stop - apply_new_auth - kill_dhcp_chroot - umount -l "$mountpoint/dev" - umount -l "$mountpoint/proc" - - echo "Done" > /tmp/.install_state - cp_and_log /tmp/mythvantage_install.log $mountpoint/var/log/ - - $run umount_it $disk - /etc/rc.d/mysqld start -} - -function netboot-full_install () { - TEMPVAR=${CMDLINE#*nfsroot=} - NFSROOT=${TEMPVAR%% *} - NFSROOT=`echo $NFSROOT|cut -d: -f1` - MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -` - URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC" - echo "calling $URL" - echo "Starting" > /tmp/.install_state - curl $URL - ${MV_ROOT}/bin/xconfig.sh -} - -# function killdhcp () { -# if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] -# then -# pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` -# kill -9 $pid -# rm -f /etc/dhcpc/dhcpcd-eth0.pid -# rm -f /var/run/dhcpcd* -# fi -# if [ -f /var/run/dhcpcd-eth0.pid ] -# then -# pid=`cat /var/run/dhcpcd-eth0.pid` -# kill -9 $pid -# rm -f /var/run/dhcpcd-eth0.pid* -# fi -# ip address flush dev eth0 -# } - - - -function SANE_SYSETTINGS () { -sed -e '/HOSTrootfstype/d' \ - -e '/HOSTrootfstype/d' \ - -e '/HOSTdatafstype/d' \ - -e '/HOSTOSsize/d' \ - -e '/HostUseALLdata/d' \ - -e '/HOSTDATAsize/d' \ - -e '/HOSTuprootfstype/d' \ - -e '/HostUseSWAP/d' \ - -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new - mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt -} - case $1 in - full_install_it ) full_install ;; - - NETBOOT) -echo "-----------------------------------------------------------------------3-----" - netboot-full_install ;; - - find_update) - - #TRY TO mount first partition of drive - #copy /etc/systemconfig to live, import settings into db - #umount drive - echo $CMDLINE | grep -q clean_upgrade - if [ $? = 1 ] - then - $run mount_it $disk - [ -e "/new_boot/root/backup/mythconverg.sql.gz" ] && cp /new_boot/root/backup/mythconverg.sql.gz /tmp - - - if [ -f /new_boot/etc/systemconfig ] - then - ###########ADD templates - mkdir -p $TEMP_TEMPLATES - cp_and_log /new_boot/$TEMPLATES $TEMP_TEMPLATES - SANE_SYSETTINGS - cp_and_log $TEMP_TEMPLATES/settings $TEMPLATES/ - cp_and_log /new_boot/etc/systemconfig /etc/systemconfig - cp_and_log /new_boot/etc /tmp/etc - cp_and_log /new_boot/var/lib/oss /tmp/oss - [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/ - - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 - else - cp_and_log /new_boot/etc /tmp/etc - [ -e /tmp/etc/mdadm.conf ] && cp_and_log /tmp/etc/mdadm.conf /etc/ - #now we search for the timezone and try to update - TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1` - TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -` - - - if [ $TZREGION = $TZSUB ] - then - $run update_db_it HostTimeZoneRegion "$TZREGION" - else - $run update_db_it HostTimeZoneRegion "$TZREGION" - $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB" - fi - fi - backup_sql_check - echo $? - upgrade_mount_search - echo $? - $run umount_it $disk - fi + full_install_it ) + mv_install.py --rootdisk=$disk --rootfs=$rootfs --rootsize=$rootsize --datafs=$datafs --datasize=$datasize --datadisk=$disk --swapsize=$swapsize -c full_install ;; - upgrade_it) - upgrade + NETBOOT) + echo "-----------------------------------------------------------------------3-----" + netboot-full_install ;; - disk_model_it) - model="unknown" - size="xxx" - case $2 in - h* ) - model=`cat /proc/ide/$2/model` - ;; - s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` - ;; - esac - size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` - echo ""$model" $size " >/tmp/model + find_update) + mv_install.py --rootdisk=$disk -c find_upgrade ;; - network_check_it) - #Should never return from check_network - case $2 in - setup_network) - vnc_check - install_network_setup - ;; - - check_self) - myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - echo "network check myself" - ifconfig - ping -c 1 $myipdefault - if [ ! $? = 0 ] - then - exit 3 - #can't ping yourself - fi - ;; - check_gw) - #check gateway - echo "network check gateway" - /sbin/route -n - mygwdefault=`/sbin/route -n |grep $default_interface|grep UG|awk '{ print $2}'` - echo "Default gateway seems to be $mygwdefault" - if [ ! x$mygwdefault = x ] - then - sleep 2 - ping -c 5 $mygwdefault - if [ ! $? = 0 ] - then - exit 4 - fi - fi - ;; - check_ns) - #check nameserver - echo " network check nameserver" - mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` - ping -c 1 $mydns - if [ ! $? = 0 ] - then - exit 5 - fi - ;; - check_names) - echo "network check resolve names" - host google.com - if [ ! $? = 0 ] - then - exit 6 - fi - ;; - host_names) - #if host is found, then check to see if it's online - #if hoip matchs my ip assume it's ok - echo "network check my hostname $hostname" - hout=`host $hostname|head -n1` - status=$? - hoip=`echo $hout|awk '{print $4}'` - if [ $hoip = found: ] - then - status=1 - fi - - unkownhost=`host unkown.linhes.org |head -n1 ` - unkownhostip=`echo $unkownhost |awk '{print $4}'` - #found host, now grab the ip - if [ $status = 0 ] - then - hoip=`echo $hout|awk '{print $4}'` - /sbin/ifconfig -a |grep -q $hoip - if [ $? = 0 ] - then - echo "DNS ip matches on of my ips $hoip" - status=0 - else - if [ $unkownhostip = $hoip ] - then - echo "Bad DNS returning false hits" - echo "Assuming hostname is OK" - echo "DNS unknown: $unkownhostip" - echo " HOSTDNS: $hoip " - /sbin/ifconfig -a |grep "inet addr" - else - echo "IP in DNS but doesn't match mine, hostname is not safe to use" - echo "DNS:$hoip" - echo "HOST: " - /sbin/ifconfig -a |grep "inet addr" - status=7 - fi - fi - else - echo "Couldn't find hostname in DNS, must be safe to use" - status=0 - fi - exit $status - ;; + upgrade_it) + mv_install.py --rootdisk=$disk --rootfs=$rootfs -c upgrade + ;; - esac - exit 0 + disk_model_it) + model="unknown" + size="xxx" + case $2 in + h* ) + model=`cat /proc/ide/$2/model` + ;; + s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` + ;; + esac + size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` + echo ""$model" $size " >/tmp/model ;; + network_check_it) + #Should never return from check_network + case $2 in + setup_network) + vnc_check + install_network_setup + ;; + + check_self) + myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + echo "network check myself" + ifconfig + ping -c 1 $myipdefault + if [ ! $? = 0 ] + then + exit 3 + #can't ping yourself + fi + ;; + check_gw) + #check gateway + echo "network check gateway" + /sbin/route -n + mygwdefault=`/sbin/route -n |grep $default_interface|grep UG|awk '{ print $2}'` + echo "Default gateway seems to be $mygwdefault" + if [ ! x$mygwdefault = x ] + then + sleep 2 + ping -c 5 $mygwdefault + if [ ! $? = 0 ] + then + exit 4 + fi + fi + ;; + check_ns) + #check nameserver + echo " network check nameserver" + mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` + ping -c 1 $mydns + if [ ! $? = 0 ] + then + exit 5 + fi + ;; + check_names) + echo "network check resolve names" + host google.com + if [ ! $? = 0 ] + then + exit 6 + fi + ;; + host_names) + #if host is found, then check to see if it's online + #if hoip matchs my ip assume it's ok + echo "network check my hostname $hostname" + hout=`host $hostname|head -n1` + status=$? + hoip=`echo $hout|awk '{print $4}'` + if [ $hoip = found: ] + then + status=1 + fi + + unkownhost=`host unkown.linhes.org |head -n1 ` + unkownhostip=`echo $unkownhost |awk '{print $4}'` + + #found host, now grab the ip + if [ $status = 0 ] + then + hoip=`echo $hout|awk '{print $4}'` + /sbin/ifconfig -a |grep -q $hoip + if [ $? = 0 ] + then + echo "DNS ip matches on of my ips $hoip" + status=0 + else + if [ $unkownhostip = $hoip ] + then + echo "Bad DNS returning false hits" + echo "Assuming hostname is OK" + echo "DNS unknown: $unkownhostip" + echo " HOSTDNS: $hoip " + /sbin/ifconfig -a |grep "inet addr" + else + echo "IP in DNS but doesn't match mine, hostname is not safe to use" + echo "DNS:$hoip" + echo "HOST: " + /sbin/ifconfig -a |grep "inet addr" + status=7 + fi + fi + else + echo "Couldn't find hostname in DNS, must be safe to use" + status=0 + fi + exit $status + ;; + + esac + exit 0 + ;; - * ) + * ) if [ -f /tmp/.install_state ] then state=`cat /tmp/.install_state` @@ -709,7 +178,7 @@ echo "-----------------------------------------------------------------------3-- if [ -f /tmp/.startsize.io ] then - . /tmp/.startsize.io + . /tmp/.startsize.io #finding the drive ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 ` used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "` @@ -731,7 +200,11 @@ echo "-----------------------------------------------------------------------3-- cond2=$(echo "$percent > 98" |bc ) if [ $cond2 -eq 1 ] then - percent=98 + percent=98 + fi + if [ x"${state}" = "xDone" ] + then + percent=100 fi cond3=$(echo "$percent < 3" |bc ) if [ $cond3 -eq 0 ] @@ -740,7 +213,7 @@ echo "-----------------------------------------------------------------------3-- fi fi fi - ;; + ;; esac diff --git a/abs/core-testing/LinHES-config/ir_config.sh b/abs/core-testing/LinHES-config/ir_config.sh deleted file mode 100644 index 28134e2..0000000 --- a/abs/core-testing/LinHES-config/ir_config.sh +++ /dev/null @@ -1,239 +0,0 @@ -function include_lirc () { - config_file=$1 - include_file=$2 - grep -q ${include_file} ${config_file} - if [ "$?" == "0" ]; then - echo ${include_file} already present - else - echo "include \"${include_file}\"" >> $config_file - fi - -} - -function unload_all_lirc () { - sv stop lircd - killall -9 lircd - modprobe -r $(lsmod |grep ^lirc |awk '{print $1}') -} - -function udev_trigger () { - udevadm settle - udevadm trigger - udevadm settle - udevadm trigger -} - - - -function setup_ir_remote { - case $Remotetype in - no_remote) echo "No remote selected" - daemon_remove="lircd $daemon_remove" - ;; - - tinker) echo "Remote in tinker mode" - ;; - - *) echo "Start of ir_remote setup" - #make backup copy - mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` - mv ${BASE}/etc/lircrc ${BASE}/etc/lircrc.`date +%Y-%m-%d-%H-%M` - if [ "$HostBlasterType" == "pvr150" ]; then - Remotetype=hauppauge-blaster - fi - - cd $TEMPLATES/remotes/$Remotetype - for i in lircd* - do - include_lirc ${BASE}/etc/lircd.conf $TEMPLATES/remotes/$Remotetype/$i - done - - for i in lircrc* - do - include_lirc ${BASE}/etc/lircrc $TEMPLATES/remotes/$Remotetype/$i - done - - chmod 755 /etc/lircrc - daemon_add="lircd $daemon_add" - #standard location for mythtv lircrc - if [ ! -e /home/mythtv/.mythtv/lircrc ]; then - if [ ! -d /home/mythtv/.mythtv ]; then - mkdir /home/mythtv/.mythtv - chown mythtv:mythtv /home/mythtv/.mythtv - fi - ln -s /etc/lircrc /home/mythtv/.mythtv/lircrc 2> /dev/null - fi - #standard location for lircrc - if [ ! -e /home/mythtv/.lircrc ]; then - ln -s /etc/lircrc /home/mythtv/.lircrc 2> /dev/null - fi -# echo "Sending hup to lircd" -# sv hup lircd - ;; - esac - -} - -function setup_ir_receiver () { - echo "setup_ir_receiver" - case $ReceiverType in - Serial) echo "setup serial lirc" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage - load-modules-mythvantage.sh - remove_service.sh igdaemon - remove_service.sh tatir - ;; - Usb-imon) echo "setup receiver-usb-imon" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage - load-modules-mythvantage.sh - remove_service.sh igdaemon - remove_service.sh tatir - ;; - Hauppauge) echo "setup hauppauge receiver (lirc_i2c)" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_i2c #lirc" >> ${BASE}/etc/modules.mythvantage - cp_and_log $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf - rmmod lirc_i2c 2>/dev/null - load-modules-mythvantage.sh - remove_service.sh igdaemon - remove_service.sh tatir - ;; - iguanaIR-usb) echo "setup iguanaIR-usb receiver" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - add_service.sh igdaemon - remove_service.sh tatir - ;; - - tatir) echo "setup tatir receiver" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - add_service.sh tatir - remove_service.sh igdaemon - ;; - - *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - remove_service.sh igdaemon - remove_service.sh tatir - ;; - esac - - -} - -function setup_lcd () { - case x$LCDtype in - xtinker) echo "do nothing" - ;; - xno_lcd) echo "disabling lcd" - sv down lcdd - #sometimes it doesn't want to die - killall -9 LCDd - load-modules-mythvantage.sh UNLOAD LCD - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - daemon_remove="lcdd $daemon_remove" - ;; - x) echo "empty lcd" ;; - - *) echo "setup lcd" - if [ -f $TEMPLATES/LCD/$LCDtype/modules ]; then - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage - #should also modprobe - fi - - - if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]; then - cp_and_log $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc - # install="lcdproc $install" - daemon_add="lcdd $daemon_add" - load-modules-mythvantage.sh - RESTART_FE="true" - RESTART_LCD="true" - fi - #check if lirc capable,if so then call setupremote - #if not in tinker mode check for remote - if [ "$Remotetype" != "tinker" ]; then - if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]; then - cd $TEMPLATES/LCD/$LCDtype - for i in lircd* - do - include_lirc ${BASE}/etc/lircd.conf $TEMPLATES/LCD/$LCDtype/$i - done - - for i in lircrc* - do - include_lirc ${BASE}/etc/lircrc $TEMPLATES/LCD/$LCDtype/$i - done - cd - - fi - fi - ;; - esac -} - -function setup_blaster_proto () { - if [ "$HostBlasterType" == "" ]; then - HostBlasterType = "crap" - fi - if [[ ("$HostBlasterType" != "pvr150") && ("$HostBlasterType" != "None") ]]; then - for i in `seq $Hostnumblaster` - do - TEMP=HostTransmitproto_$i - eval proto=\$${TEMP} - if [ -f $TEMPLATES/transmit/${proto}/lircd.conf ]; then - include_lirc ${BASE}/etc/lircd.conf $TEMPLATES/transmit/${proto}/lircd.conf - fi - done - fi - #--------------------------------REVISIT THIS------------------------ - #sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > #${BASE}/usr/bin/change_chan.sh - #chmod 755 ${BASE}/usr/bin/change_chan.sh - #channel change script change -} - -function setup_blaster_transmiter () { - echo "setup_blaster_transmiter" - #if it's Reciever type, then these modules have already been loaded. - if [ "$HostBlasterType" != "Receiver" ]; then - case $HostBlasterType in - None) echo "no blaster" - sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage - ;; - Serial) echo "setup serial lirc blaster" - sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage - echo "lirc_serial #blaster" >> ${BASE}/etc/modules.mythvantage - load-modules-mythvantage.sh - ;; - pvr150) echo "setup hauppauge blaster (lirc_pvr150)" - sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_pvr150 #blaster" >> ${BASE}/etc/modules.mythvantage - echo "lirc_pvr150 #lirc" >> ${BASE}/etc/modules.mythvantage - #cp_and_log $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf - rmmod lirc_i2c 2>/dev/null - load-modules-mythvantage.sh - ;; - *) sed -i -e '/.*#blaster/d' ${BASE}/etc/modules.mythvantage - ;; - esac - fi - -} - -function setupir () { - if [ "$Remotetype" != "tinker" ]; then - setup_ir_remote - setup_ir_receiver - unload_all_lirc - setup_blaster_proto - setup_blaster_transmiter - RESTART_FE="true" - load-modules-mythvantage.sh - udev_trigger - sleep 1 - sv start lircd - - fi - setup_lcd -} diff --git a/abs/core-testing/LinHES-config/mv_common.py b/abs/core-testing/LinHES-config/mv_common.py index 9b33454..31740c3 100755 --- a/abs/core-testing/LinHES-config/mv_common.py +++ b/abs/core-testing/LinHES-config/mv_common.py @@ -94,6 +94,8 @@ def pacinstall(pkg): pacinstall("libdvdcss") elif pkg == "webmin": add_service("webmin") + elif pkg == "fuppes": + pacinstall("fuppes-svn") if not pkg_blacklist_check(pkg): if pkg_installed_check(pkg): @@ -139,9 +141,11 @@ def restartLCD(RESTART_LCD): def reloadfe(dbhost,RESTART_LCD): logging.debug("____Start of reloadfe____") - logging.info(" Clearing Backend cache") - cmd = '''/usr/bin/backend_control.sh clearcache behost %s''' %dbhost - runcmd(cmd) + if data_config.SYSTEMTYPE == "MythVantage": + logging.info(" Clearing Backend cache") + cmd = '''/usr/bin/backend_control.sh clearcache behost %s''' %dbhost + runcmd(cmd) + restartLCD(RESTART_LCD) for pid in getpid("mythfrontend"): cmd = ''' kill -s USR1 %s ''' %pid diff --git a/abs/core-testing/LinHES-config/mv_hostype.py b/abs/core-testing/LinHES-config/mv_hostype.py index 0bbd16e..fff0e8a 100755 --- a/abs/core-testing/LinHES-config/mv_hostype.py +++ b/abs/core-testing/LinHES-config/mv_hostype.py @@ -20,7 +20,7 @@ def setup_avahi(templates): os.makedirs("/etc/avahi/services") except: logging.debug(" Couldn't create /etc/avahi/services") - mv_common.cp_and_log(template+"/mysql.service",file) + mv_common.cp_and_log(templates+"/mysql.service",file) cmd="sudo sv restart avahi" mv_common.runcmd(cmd) diff --git a/abs/core-testing/LinHES-config/mv_software.py b/abs/core-testing/LinHES-config/mv_software.py index 047a235..e5b96b2 100755 --- a/abs/core-testing/LinHES-config/mv_software.py +++ b/abs/core-testing/LinHES-config/mv_software.py @@ -10,7 +10,7 @@ def setup_software(systemconfig, data_config): default_installed=("mythcontrols", "mythgallery", "mythmovies", "mythmusic", "mythsmolt", "mythvideo") - other_pkg=("miro", "xe", "romdb", "xine", "dvdcss", "webmin") + other_pkg=("miro", "xe", "romdb", "xine", "dvdcss", "webmin" , "fuppes") for pkg in default_disabled: try: diff --git a/abs/core-testing/LinHES-config/myth_user_call b/abs/core-testing/LinHES-config/myth_user_call index 0479895..0914b03 100644 --- a/abs/core-testing/LinHES-config/myth_user_call +++ b/abs/core-testing/LinHES-config/myth_user_call @@ -31,6 +31,8 @@ function add_user() { else echo "adding user $USERNAME" useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users + usermod -a -G mythtv $USERNAME + fi } diff --git a/abs/core-testing/mythtv/stable/mythtv/PKGBUILD b/abs/core-testing/mythtv/stable/mythtv/PKGBUILD index be8358a..d42c716 100644 --- a/abs/core-testing/mythtv/stable/mythtv/PKGBUILD +++ b/abs/core-testing/mythtv/stable/mythtv/PKGBUILD @@ -1,10 +1,10 @@ pkgname=mythtv pkgver=0.21 -pkgrel=69 +pkgrel=70 pkgdesc="A Homebrew PVR project" arch=('i686' 'x86_64') depends=('bash' 'mysql-clients>=5.0' 'qt3' 'lame' 'lirc-utils' 'ffmpeg' \ - 'libxvmc' 'libavc1394' 'libdc1394' 'libiec61883' 'perl-net-upnp') + 'libxvmc' 'libavc1394' 'libdc1394' 'libiec61883' 'perl-net-upnp' 'perl-time-format') backup=(etc/mythtv/mythbackend.conf etc/mythtv/mysql.txt usr/share/mythtv/is.xmlusr/share/mythtv/media_settings.xml ) source=(ftp://ftp.knoppmyth.net/R6/sources/${pkgname}-${pkgver}-fixes.tar.bz2 \ mythbackend myththemedmenu.cpp.patch myththemedmenu.h.patch smolt_jump.patch pretty gnome_screensaver.patch mpegpspatch mythbackend.lr mythfrontend.lr) @@ -72,7 +72,9 @@ build() { # install contrib mkdir -p $startdir/pkg/usr/share/mythtv/contrib || return 1 - install -m0755 contrib/* $startdir/pkg/usr/share/mythtv/contrib + rsync -a --exclude=.svn --exclude=*~ contrib $startdir/pkg/usr/share/mythtv/ +# cp -rap contrib $startdir/pkg/usr/share/mythtv/contrib + #install -m0755 contrib/* $startdir/pkg/usr/share/mythtv/contrib # set suid on mythfrontend #chmod a+s $startdir/pkg/usr/bin/mythfrontend diff --git a/abs/core-testing/perl_modules/perl-time-format/PKGBUILD b/abs/core-testing/perl_modules/perl-time-format/PKGBUILD new file mode 100644 index 0000000..40a2ae2 --- /dev/null +++ b/abs/core-testing/perl_modules/perl-time-format/PKGBUILD @@ -0,0 +1,21 @@ +# This PKGBUILD was autocreated. See http://xtermin.us/archperl/ for details +# Maintainer: Charles Mauch <cmauch@gmail.com> + +pkgname=perl-time-format +pkgver=1.09 +pkgrel=1 +pkgdesc="Perl/CPAN Module Time::Format : Easytouse datetime formatting" +arch=("i686" "x86_64") +url="http://search.cpan.org/dist/Time-Format" +license=("GPL" "Artistic") +source=("http://www.cpan.org/authors/id/R/RO/ROODE/Time-Format-$pkgver.tar.gz") + +build() { + cd $startdir/src/Time-Format-$pkgver + PERL_MM_USE_DEFAULT=1 perl Makefile.PL INSTALLDIRS=vendor || return 1 + make || return 1 + make install DESTDIR=$startdir/pkg || return 1 + find $startdir/pkg -name '.packlist' -delete + find $startdir/pkg -name '*.pod' -delete +} +md5sums=('c0edfd94d8f4cb814dee7bdf7e9ed61f') diff --git a/abs/core-testing/samba/PKGBUILD b/abs/core-testing/samba/PKGBUILD index 2e56238..24b2dba 100644 --- a/abs/core-testing/samba/PKGBUILD +++ b/abs/core-testing/samba/PKGBUILD @@ -1,18 +1,18 @@ -# $Id: PKGBUILD 22200 2008-12-22 22:24:26Z tpowa $ +# $Id: PKGBUILD 37517 2009-05-02 16:35:12Z tpowa $ # Maintainer: judd <jvinet@zeroflux.org> pkgname=samba -pkgver=3.2.6 +pkgver=3.3.4 # We use the 'A' to fake out pacman's version comparators. Samba chooses # to append 'a','b',etc to their subsequent releases, which pamcan # misconstrues as alpha, beta, etc. Bad samba! -_realver=3.2.6 -pkgrel=5 +_realver=3.3.4 +pkgrel=1 pkgdesc="Tools to access a server's filespace and printers via SMB" arch=(i686 x86_64) url="http://www.samba.org" license=('GPL3') backup=(etc/logrotate.d/samba etc/pam.d/samba etc/samba/smb.conf etc/xinetd.d/swat etc/conf.d/samba) -depends=('db>=4.7' 'popt' 'libcups' 'acl' 'libldap' 'smbclient=3.2.6' 'libcap' 'heimdal>=1.2-1' 'pam' 'gnutls>=2.4.1' 'tdb=3.2.6') +depends=('db>=4.7' 'popt' 'libcups' 'acl' 'libldap' 'smbclient=3.3.4' 'libcap>=2.16' 'heimdal>=1.2-1' 'pam' 'gnutls>=2.4.1' 'tdb=3.3.4') options=(!makeflags) source=(http://us1.samba.org/samba/ftp/stable/${pkgname}-${_realver}.tar.gz \ no-clients.patch samba samba.logrotate swat.xinetd samba.pam samba.conf.d) @@ -27,7 +27,8 @@ build() { --with-fhs --with-pam --with-ads --with-acl-support \ --without-cifsmount --without-libsmbclient \ --with-syslog --with-pam_smbpass \ - --localstatedir=/var --disable-dnssd --libdir=/usr/lib/samba --without-fam + --localstatedir=/var --disable-dnssd \ + --disable-avahi --libdir=/usr/lib/samba --without-fam make || return 1 mkdir -p ${pkgdir}/var/log/samba mkdir -p ${pkgdir}/etc/samba/private @@ -75,9 +76,11 @@ build() { rm -f ${pkgdir}/usr/share/man/man7/libsmbclient.7 rm -f ${pkgdir}/usr/include/libsmbclient.h + # copy ldap example + install -D -m644 ${srcdir}/${pkgname}-${_realver}/examples/LDAP/samba.schema ${pkgdir}/usr/share/doc/samba/examples/LDAP/samba.schema } -md5sums=('0cd27c7afbb8211616eea4010f32271c' - 'a676f0dde2c434aeb5125376b8797a64' +md5sums=('1443165edb7cb3f56f1e77aec1ee3266' + 'ce3d88336ade7522e9a8f59bb306accd' 'e93533fa2296c07c1f645dfdd373657f' '5697da77590ec092cc8a883bae06093c' 'a4bbfa39fee95bba2e7ad6b535fae7e6' diff --git a/abs/core-testing/samba/no-clients.patch b/abs/core-testing/samba/no-clients.patch index 61e4e5c..e06da8d 100644 --- a/abs/core-testing/samba/no-clients.patch +++ b/abs/core-testing/samba/no-clients.patch @@ -11,14 +11,14 @@ diff -Naur samba-3.0.23-orig/source/Makefile.in samba-3.0.23/source/Makefile.in - bin/nmblookup@EXEEXT@ bin/pdbedit@EXEEXT@ bin/tdbdump@EXEEXT@ \ - bin/tdbtool@EXEEXT@ -BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/rpcclient@EXEEXT@ bin/smbcacls@EXEEXT@ \ -- bin/profiles@EXEEXT@ bin/ntlm_auth@EXEEXT@ \ +- bin/profiles@EXEEXT@ bin/ntlm_auth@EXEEXT@ bin/sharesec@EXEEXT@ \ - bin/smbcquotas@EXEEXT@ bin/eventlogadm@EXEEXT@ +BIN_PROGS1 = bin/testparm@EXEEXT@ bin/smbstatus@EXEEXT@ +BIN_PROGS2 = bin/smbcontrol@EXEEXT@ bin/tdbbackup@EXEEXT@ bin/pdbedit@EXEEXT@ +BIN_PROGS3 = bin/smbpasswd@EXEEXT@ bin/profiles@EXEEXT@ bin/ntlm_auth@EXEEXT@ \ + bin/eventlogadm@EXEEXT@ BIN_PROGS4 = bin/ldbedit@EXEEXT@ bin/ldbsearch@EXEEXT@ bin/ldbadd@EXEEXT@ \ - bin/ldbdel@EXEEXT@ bin/ldbmodify@EXEEXT@ + bin/ldbdel@EXEEXT@ bin/ldbmodify@EXEEXT@ bin/ldbrename@EXEEXT@ @@ -160,7 +156,7 @@ diff --git a/abs/core/live-installer/LinHES-release b/abs/core/live-installer/LinHES-release deleted file mode 100644 index a4de764..0000000 --- a/abs/core/live-installer/LinHES-release +++ /dev/null @@ -1 +0,0 @@ -LinHES R6.00.02 diff --git a/abs/core/live-installer/MythVantage.sh b/abs/core/live-installer/MythVantage.sh deleted file mode 100755 index 286c908..0000000 --- a/abs/core/live-installer/MythVantage.sh +++ /dev/null @@ -1,3 +0,0 @@ -export MV_ROOT=/usr/MythVantage -export PATH=$PATH:$MV_ROOT/bin -export TEMPLATES=$MV_ROOT/templates diff --git a/abs/core/live-installer/PKGBUILD b/abs/core/live-installer/PKGBUILD deleted file mode 100755 index e93031d..0000000 --- a/abs/core/live-installer/PKGBUILD +++ /dev/null @@ -1,66 +0,0 @@ -pkgname=live-installer -pkgver=1.0 -pkgrel=27 -pkgdesc="Install and configure your system" -#depends=(bc mysql-python expect curl dnsutils) -depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils) -arch=('i686') -#source=(mythinstall.bin install-ui.xml bpopup-ui.xml mythbeselect.bin install_proxy.sh install_functions.sh startx systemconfig.sh install_db_chroot.sh restore_default_settings.sh live-install.sh xconfig.sh timezip.py soundconfig.sh mythvantage-release issue autocard.py MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh ) - - -source=(mythinstall.bin file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh ) - - -install=live.install -build() { - - - mkdir -p $startdir/pkg/etc - mkdir -p $startdir/pkg/usr/share/mythtv/themes/default - -# new stuff - MVDIR=$startdir/pkg/usr/MythVantage - mkdir $startdir/pkg/etc/profile.d - install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh - mkdir -p $MVDIR/bin - mkdir -p $MVDIR/templates - mkdir -p $MVDIR/etc - -#copy in all the installer specific stuff - #cp -rp ../templates $MVDIR/ - rsync -r --exclude=.svn ../templates $MVDIR/ - install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh - install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh - install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh - install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh -# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh - install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh - install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh - install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh - install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh - install -m 0755 create_master.sh $MVDIR/bin/create_master.sh - install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh - install -m 0755 timezip.py $MVDIR/bin/timezip.py - mkdir -p $startdir/pkg/usr/bin - install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py - #copy in the branding stuff - install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release - install -m 0755 issue $startdir/pkg/etc/issue - -# copy over the ui files - install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/ -# install -m 0755 bpopup-ui.xml $startdir/pkg/usr/local/share/mythtv/themes/default/ - -#copy in the binaries - #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage - install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage - cd $MVDIR/bin - ln -s MythVantage mythvantage - ln -s MythVantage mythinstall - cd - -# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect - -# install -m 0755 startx $startdir/pkg/root/startx -# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh -} - diff --git a/abs/core/live-installer/add_service.sh b/abs/core/live-installer/add_service.sh deleted file mode 100755 index 190d604..0000000 --- a/abs/core/live-installer/add_service.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/bash -SERVICE_DIR=/var/service -SCRIPT_DIR=/etc/sv -if [ -d $SCRIPT_DIR/$1 ] -then - if [ -d $SERVICE_DIR/$1 ] - then - echo "$1 already there" - else - ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1 - echo "adding $1" - fi -else - echo "couldn't find $SCRIPT_DIR/$1" -fi diff --git a/abs/core/live-installer/autocard.py b/abs/core/live-installer/autocard.py deleted file mode 100755 index b59b8d6..0000000 --- a/abs/core/live-installer/autocard.py +++ /dev/null @@ -1,302 +0,0 @@ -#!/usr/bin/python -# import MySQL module -#jm -import MySQLdb -import sys -import getopt -import socket -import os -import time -import string -import glob -from string import letters -from string import digits - -def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor): - global currenthostname - print Device - print Driver, - print Cardvendor - cursor = db.cursor() - insert = "false" - if Driver == "ivtv" : - cardtype="MPEG" - defaultinput="Tuner 1" - insert="true" - if Cardvendor == "pcHDTV HD3000 HDTV": - insert="false" - cardtype ="whocares" - - #print insert - if insert == "true" : - cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname)) - -def INSERTHDR_INTOMYTH(deviceid,tuner_number): - cardtype='HDHOMERUN' - defaultinput='MPEG2TS' - global currenthostname - print deviceid - print cardtype - print defaultinput - print tuner_number - cursor = db.cursor() - #print insert - cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname)) - -def INSERTAUTOCARD(): - global cardlist - global currenthostname - # create a cursor - cursor = db.cursor() - - - for i in range( 1 , len(cardlist)): - insert = "false" -# print cardlist[i] - Device=cardlist[i][0] - Driver=cardlist[i][1] - Cardvendor=cardlist[i][2] - Businfo=cardlist[i][3] - if Driver == "ivtv" : - insert="true" - devicestatus="unused" - if Cardvendor == "pcHDTV HD3000 HDTV": - insert="false" - cardtype ="whocares" - if Driver == "hdr": - insert="true" - devicestatus="unused" - - if insert == "true" : - cursor.execute("delete from autocard where uniqid=%s;",(Businfo)) - if Driver=="hdr": - Cardvendor="HDHOMERUN Tuner 1" - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - Cardvendor="HDHOMERUN Tuner 2" - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - - else: - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - - - -def PRINTINFO(): - global cardlist - - for list in cardlist: - if list != "_placeholder_": - print list - #print "-------------" - -def GATHER_HDR(): - global cardlist - command="/usr/bin/hdhomerun_config --discover" - results=os.popen(command,'r') - line=results.readline() - if line.strip().split()[0] == "no": - print "HDHOMERUN not detected" - else: - print line - hdrdevice=line.strip().split()[2] - print hdrdevice - Driver="hdr" - Device=hdrdevice - Cardtype="HDHOMERUN" - Businfo=hdrdevice - cardprops = [Device,Driver , Cardtype , Businfo] - cardlist.append(cardprops) - - -def GATHER_v4l_CARDS(): - global cardlist - cardlist=["_placeholder_"] - # print "Looking for v4l cards" - try: - filelist = os.listdir('/dev/v4l/') - except OSError: - filelist=" " - #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0'] - #cardlist.append(fakelist) - try: - filelist = glob.glob("/dev/v4l/video?") - Driver="" - Cardtype="" - Businfo="" - numcards = 0 - for Device in filelist: - #print card - numcards = numcards+1 - cmd = 'v4l2-ctl -D -d' + Device - for line in os.popen(cmd).readlines(): - #print line - pos = string.find(line,"Driver name") - if pos >=0: - splitline= line.split(':') - Driver=splitline[1].strip() - pos = string.find(line,"Card type") - if pos >=0: - splitline= line.split(':') - Cardtype=splitline[1].strip() - - pos = string.find(line,"Bus info") - if pos >=0: - splitline= line.split(':',1) - Businfo=splitline[1].strip() - - #print Device,Driver , Cardtype , Businfo,numcards - cardprops = [Device,Driver , Cardtype , Businfo] - cardlist.append(cardprops) - except IOError: - print "no v4l cards found" - sys.exit(2) - - -def WRITEUDEV_IVTV(): - global insertmyth - cursor = db.cursor() - #add ivtv,cid lookup loop through until empty. - cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'") - cidrows = cursor.fetchall() - for row in cidrows: - cid=row[0] - cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid)) - result = cursor.fetchone() - description=result[2] - driver='DRIVERS==\"ivtv\"' - ATTRNAME='ATTR{name}=="ivtv? encoder MPG"' - KERNELS='KERNELS==\"' - KERNELS+=cid - KERNELS+="\"" - #filter out non digit or chars - keep=letters.join(digits) - description=filter(lambda c: c in keep, description) - devnode="ivtv/" - #devnode+=description + "_" - udevcid=cid.partition(":") - devnode+=udevcid[2] - devnode+="_video" - UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"' - print "Here is the udev rule" - print UDEV_RULE - filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules' - file = open(filename,'w') - file.write(UDEV_RULE) - if ( insertmyth == "true"): - devnode="/dev/"+devnode - INSERTCARD_INTOMYTH(devnode,"ivtv",description) - cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid)) -#now insert HDR - cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'") - cidrows = cursor.fetchall() - for row in cidrows: - if ( insertmyth == "true"): - deviceid=row[0] - #cardtype="HDHOMRUN" - #defaultinput="MPEG2TS" - dbox2_port=row[1] - tuner_number=dbox2_port.rpartition(' ')[2] - INSERTHDR_INTOMYTH(deviceid,tuner_number) - cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port)) - - - -def CLEARAUTOCARD(): - cursor = db.cursor() - cursor.execute("delete from autocard") - -def RELOADUDEV(): - print "relaoding udev rules" - os.system('udevcontrol reload_rules') - os.system('rmmod ivtv') - os.system('udevtrigger') - - -def usage(): - print " -h help" - print " -g gather and print out the found cards" - print " -w write out the udev rules" - print " -i insert cards into myth that are marked will-add(only used with -w)" - print " -r reload udev rules" - print " -c clear the autocard db" - -def main(argv): - global db - global cardlist - global currenthostname - currenthostname="" - writeudev="false" - global insertmyth - insertmyth ="false" - - db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg") - try: - cursor = db.cursor() - cursor.execute("describe autocard;") - except MySQLdb.Error, e: - cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));") - print "table created" - - if ( currenthostname == "" ): - currenthostname = socket.gethostname() - - - try: - opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] ) - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - usage() - sys.exit() - elif opt in ( "-g" , "--gathercards"): - GATHER_v4l_CARDS() - GATHER_HDR() - INSERTAUTOCARD() - PRINTINFO() - elif opt in ("-w", "--writeudev"): - writeudev="true" - elif opt in ("-i", "--insert"): - insertmyth="true" - elif opt in ( "-r" , "--reloadudev"): - RELOADUDEV() - elif opt in ( "-c" , "--clearautocard"): - CLEARAUTOCARD() - - - if ( writeudev == "true"): - WRITEUDEV_IVTV() - - - - - - -if __name__ == "__main__": - main(sys.argv[1:]) - - - - - -#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50)); -#Query OK, 0 rows affected (0.14 sec) - -#mysql> describe autocard; -#+--------------+-------------+------+-----+---------+-------+ -#| Field | Type | Null | Key | Default | Extra | -#+--------------+-------------+------+-----+---------+-------+ -#| dev | varchar(50) | YES | | NULL | | -#| driver | varchar(50) | YES | | NULL | | -#| description | varchar(50) | YES | | NULL | | -#| uniqid | varchar(50) | YES | | NULL | | -#| devicestatus | varchar(50) | YES | | NULL | | -#| hostname | varchar(50) | YES | | NULL | | -#+--------------+-------------+------+-----+---------+-------+ - - - - - - - - diff --git a/abs/core/live-installer/bpopup-ui.xml b/abs/core/live-installer/bpopup-ui.xml deleted file mode 100755 index df0598b..0000000 --- a/abs/core/live-installer/bpopup-ui.xml +++ /dev/null @@ -1,164 +0,0 @@ -<!-- - - This is a myth style theme file for mythwelcome - - (c) 2005 by a whole bunch of people associated with MythTV - ---> -<mythuitheme> - - <window name="welcome_screen"> - - <!-- - - First, define all the fonts we need on this screen - - --> - <font name="title" face="Arial"> - <color>#ffff00</color> - <dropcolor>#000000</dropcolor> - <size>24</size> - <shadow>3,3</shadow> - <bold>yes</bold> - </font> - - <font name="time" face="Arial"> - <color>#9999cc</color> - <size>18</size> - <bold>yes</bold> - </font> - - <font name="label" face="Arial"> - <color>#ffff00</color> - <dropcolor>#000000</dropcolor> - <size>18</size> - <shadow>3,3</shadow> - <bold>yes</bold> - </font> - - <font name="info" face="Arial"> - <color>#ffffff</color> - <size>18</size> - <bold>yes</bold> - </font> - - <font name="biginfo" face="Arial"> - <color>#ffffff</color> - <size>50</size> - <bold>yes</bold> - </font> - <font name="warning" face="Arial"> - <color>#ff0000</color> - <dropcolor>#000000</dropcolor> - <size>16</size> - <shadow>2,2</shadow> - <bold>yes</bold> - </font> - - <font name="buttons" face="Arial"> - <color>#ffff00</color> - <size>14</size> - <bold>yes</bold> - </font> - - <container name="main_display"> - <area>0,0,800,600</area> - - <textarea name="title" draworder="0" align="center"> - <multiline>no</multiline> - <font>title</font> - <area>50,40,700,40</area> - <value></value> - </textarea> - - <!-- - time - --> - <textarea name="time_text" draworder="0" align="right"> - <multiline>no</multiline> - <font>time</font> - <area>660,520,110,30</area> - <value></value> - </textarea> - - <textarea name="date_text" draworder="0" align="center"> - <multiline>no</multiline> - <font>time</font> - <area>0,60,800,70</area> - <value></value> - </textarea> - - <!-- - current myth status - --> - - <textarea name="status_text" draworder="1" align="center"> - <multiline>yes</multiline> - <font>info</font> - <area>20,70,760,60</area> - <value>MythTV is idle and will shutdown shortly.</value> - </textarea> - - <!-- - current recordings status - --> - - <textarea name="recording_label" draworder="1" align="center"> - <font>label</font> - <area>20,110,760,30</area> - <!--<value>Percent Complete </value>--> - <value></value> - </textarea> - - <textarea name="recording_text" draworder="1" align="hcenter"> - <multiline>yes</multiline> - <font>biginfo</font> - <area>20,110,760,150</area> - <value></value> - </textarea> - - <!-- - next scheduled recording status - --> - - <textarea name="scheduled_label" draworder="1" align="center"> - <font>label</font> - <area>20,320,760,30</area> - <value></value> - </textarea> - - <textarea name="scheduled_text" draworder="1" align="hcenter"> - <multiline>yes</multiline> - <font>biginfo</font> - <area>20,400,760,120</area> - <value></value> - </textarea> - - <!-- - scheduled recordings conflict warning - --> - - <textarea name="conflicts_text" draworder="1" align="center"> - <font>warning</font> - <area>20,490,760,30</area> - <value>WARNING: There are conflicting scheduled recordings!</value> - </textarea> - - <!-- - start frontend button - - <textbutton name="startfrontend_button" draworder="1"> - <position>81,535</position> - <font>buttons</font> - <image function="on" filename="mw_text_button_on.png"></image> - <image function="off" filename="mw_text_button_off.png"></image> - <image function="pushed" filename="mw_text_button_pushed.png"></image> - </textbutton> - - --> - - </container> - - </window> - -</mythuitheme> diff --git a/abs/core/live-installer/build_diskless.sh b/abs/core/live-installer/build_diskless.sh deleted file mode 100755 index 4dfd5fc..0000000 --- a/abs/core/live-installer/build_diskless.sh +++ /dev/null @@ -1,143 +0,0 @@ -#!/bin/bash -#CD=/mnt/cd -. /etc/profile -. /etc/systemconfig - -TFTP=/data/srv/tftp -CD=/data/srv/tftp/live -DESTCD=/data/srv/tftp/CD -BASE=/data/srv/tftp/masterbuild - -MODULES=$DESTCD/MythVantage/base/ -myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` -SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/ - -function log () { -echo $1 -} - -function check_xvfb () { -export DISPLAY=127.0.0.1:25 - Xvfb -ac :25 & - -} - - -function create_base_image() { -echo $SRCFILES -if [ -f $SRCFILES/data.lzm ] -then - mkdir $HOST_IMG_DIR - cd $SRCFILES - echo "Creating image.." > $BASE/tmp/.install_state - LIST=`ls *.lzm` - for i in $LIST - do - echo $i - echo $i > $BASE/tmp/.install_percent - lzm2dir $i \/$HOST_IMG_DIR - done - - for i in sys proc dev tmp - do - mkdir /$HOST_IMG_DIR/$i - done - - chmod 777 /$HOST_IMG_DIR/tmp - mknod /$HOST_IMG_DIR/dev/null c 1 3 - mknod /$HOST_IMG_DIR/dev/null c 1 5 - mknod /$HOST_IMG_DIR/dev/console c 5 1 - chmod +s /$HOST_IMG_DIR/usr/bin/Xorg - chmod +s /$HOST_IMG_DIR/usr/bin/crontab - chmod +s /$HOST_IMG_DIR/usr/bin/sudo - chmod +s /$HOST_IMG_DIR/bin/mount - #copy fstab from masterbuild - cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab - echo "Done: installing data" > $BASE/tmp/.install_state - return 0 -else - echo "Error: no modules" > $BASE/tmp/.install_state - log "couldn't find modules to install" - return 1 -fi -} - -function configure_image () { - echo "Configuring system" > $BASE/tmp/.install_state - cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig - chown root:mythtv $HOST_IMG_DIR/etc/systemconfig - chmod 775 "$HOST_IMG_DIR" /etc/systemconfig - cp /etc/mtab $HOST_IMG_DIR/etc/mtab - mount --bind /dev $HOST_IMG_DIR/dev - - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install -#copy syssettings template to here. - SE=$BASE$TEMPLATES/settings/syssettings - mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings - cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings - chown root:mythtv $HOST_IMG_DIR/etc/systemconfig - chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings - chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings -#update remotedb with this host settings - OLDDISPLAY=$DISPLAY - check_xvfb - chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1 - chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - if [ ! $? = 0 ] - then - touch $mountpoint/tmp/.dbsysfailed - chmod 777 $mountpoint/tmp/.dbsysfailed - else - #Run second time - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - fi -chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install -cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf -echo "Done" > $BASE/tmp/.install_state -DISPLAY=$OLDDISPLAY - -#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/ -} - -function create_tftp_boot () { - - CFGFILE=$TFTP/pxelinux.cfg/01-$2 - echo "DEFAULT mythfe" > $CFGFILE - echo "LABEL mythfe" >> $CFGFILE - echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE - echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE - echo "TIMEOUT 2" >> $CFGFILE -} - -function create_nfs_export () { -echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports -exportfs -arv -} - -#-------------------------------------------------------------------------------MAIN PROGRAM --------------------------------------------------------------------- -if [ x$1 = x -o x$2 = x ] -then - echo "usage: hostname macaddress" - exit 1 -fi - -image_name=$1 -mac_address=`echo $2| tr "[:upper:]" "[:lower:]"` - -echo "using image_name of $image_name" -echo "using mac_address of $mac_address" - -HOST_IMG_DIR=$TFTP/$1 - -create_base_image $image_name -configure_image -umount $HOST_IMG_DIR/dev -create_tftp_boot $image_name $mac_address -create_nfs_export $image_name - - - - -#create_dhcp_entry $mac_address - diff --git a/abs/core/live-installer/copy-to-mythbase.sh b/abs/core/live-installer/copy-to-mythbase.sh deleted file mode 100755 index af89f52..0000000 --- a/abs/core/live-installer/copy-to-mythbase.sh +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/bash - -DATADIR="../mythtv/stable/mythtv/src/mythtv-0.21/programs" -mkdir $DATADIR/mythinstall -mkdir $DATADIR/mythbeselect -rm mythinstall.bin -rm mythbeselect.bin -ln -n `pwd`/mythinstall/* $DATADIR/mythinstall -ln -n `pwd`/mythbeselect/* $DATADIR/mythbeselect - -ln -s $DATADIR/mythbeselect/mythbeselect ./mythbeselect.bin -ln -s $DATADIR/mythinstall/mythinstall ./mythinstall.bin diff --git a/abs/core/live-installer/create_master.sh b/abs/core/live-installer/create_master.sh deleted file mode 100755 index 1e641b4..0000000 --- a/abs/core/live-installer/create_master.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/bash -#CD=/mnt/cd -CD=/data/srv/tftp/live -DESTCD=/data/srv/tftp/CD -DEST=/data/srv/tftp/masterbuild -MODULES=$DESTCD/MythVantage/base/ -myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - -mkdir -p $DESTCD -mkdir -p $DEST - -mount $CD -status=0 -if [ -f $CD/MythVantage/base/data.lzm ] -then - status=0 -else - status=1 -fi -if [ x$status = x0 ] -then - echo "copying to disk" - cp -rp $CD/* $DESTCD - cd $MODULES - for i in *.lzm - do - echo $i - lzm2dir $i \/$DEST - done - for i in sys proc dev tmp - do - mkdir $DEST/$i - done - chmod 777 /$DEST/tmp - mknod $DEST/dev/null c 1 3 - mknod $DEST/dev/null c 1 5 - mknod $DEST/dev/console c 5 1 - chmod +s $DEST/usr/bin/Xorg - chmod +s $DEST/usr/bin/crontab - chmod +s $DEST/usr/bin/sudo - chmod +s $DEST/bin/mount -fi -if [ ! -f $DEST/etc/fstab.bak ] -then - cp $DEST/etc/fstab $DEST/etc/fstab.bak -fi -tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab -echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab -echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports - - -exportfs -arv - -#copy in the modules -mkdir -p $DEST/mnt/live/mnt/ -mv $DESTCD/* $DEST/mnt/live/mnt/ - diff --git a/abs/core/live-installer/file_time_offset.py b/abs/core/live-installer/file_time_offset.py deleted file mode 100755 index f2973d0..0000000 --- a/abs/core/live-installer/file_time_offset.py +++ /dev/null @@ -1,39 +0,0 @@ -#!/usr/bin/python - - -import time -import os -import glob -import getopt -import sys -def main(argv): - filecount=0 -# root = "/tmp" -# offset = 4 - now = int(time.time()) - - - try: - opts, args = getopt.getopt(argv, "hs:d:") - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - print "-s seconds -d /testdir" - print "default if 4 seconds" - sys.exit() - elif opt in ( "-s" ): - offset = int(arg) - elif opt in ("-d"): - root = arg - - for item in glob.glob(root+"/*"): - lastmodDate = os.path.getmtime(item) - tdiff= now-lastmodDate - #print tdiff, offset - - if tdiff > offset: - filecount+=1 - print filecount -if __name__ == "__main__": - main(sys.argv[1:]) diff --git a/abs/core/live-installer/install-ui.xml b/abs/core/live-installer/install-ui.xml deleted file mode 100755 index 0ec9ddb..0000000 --- a/abs/core/live-installer/install-ui.xml +++ /dev/null @@ -1,175 +0,0 @@ -<!-- - - This is a myth style theme file for mythwelcome - - (c) 2005 by a whole bunch of people associated with MythTV - ---> -<mythuitheme> - - <window name="welcome_screen"> - - <!-- - - First, define all the fonts we need on this screen - - --> - <font name="title" face="Arial"> - <color>#ffff00</color> - <dropcolor>#000000</dropcolor> - <size>24</size> - <shadow>3,3</shadow> - <bold>yes</bold> - </font> - - <font name="time" face="Arial"> - <color>#9999cc</color> - <size>18</size> - <bold>yes</bold> - </font> - - <font name="label" face="Arial"> - <color>#ffff00</color> - <dropcolor>#000000</dropcolor> - <size>18</size> - <shadow>3,3</shadow> - <bold>yes</bold> - </font> - - <font name="info" face="Arial"> - <color>#ffffff</color> - <size>18</size> - <bold>yes</bold> - </font> - - <font name="biginfo" face="Arial"> - <color>#ffffff</color> - <size>50</size> - <bold>yes</bold> - </font> - <font name="warning" face="Arial"> - <color>#ff0000</color> - <dropcolor>#000000</dropcolor> - <size>16</size> - <shadow>2,2</shadow> - <bold>yes</bold> - </font> - - <font name="buttons" face="Arial"> - <color>#ffff00</color> - <size>14</size> - <bold>yes</bold> - </font> - <font name="tinyinfo" face="Arial"> - <color>#9999cc</color> - <size>12</size> - <bold>no</bold> - </font> - - <container name="main_display"> - <area>0,0,800,600</area> - - <textarea name="title" draworder="0" align="center"> - <multiline>no</multiline> - <font>title</font> - <area>50,40,700,40</area> - <value>LinHes: The Linux Home Entertainment System </value> - </textarea> - - <!-- - time - --> - <textarea name="time_text" draworder="0" align="right"> - <multiline>no</multiline> - <font>time</font> - <area>660,520,110,30</area> - <value></value> - </textarea> - - <textarea name="date_text" draworder="0" align="hcenter"> - <multiline>yes</multiline> - <font>time</font> - <area>20,75,740,100</area> - <value></value> - </textarea> - - <!-- - current myth status - --> - - <textarea name="status_text" draworder="1" align="center"> - <multiline>yes</multiline> - <font>info</font> - <area>20,100,760,60</area> - <value>MythTV is idle and will shutdown shortly.</value> - </textarea> - - <!-- - current recordings status - --> - - <textarea name="recording_label" draworder="1" align="center"> - <font>label</font> - <area>20,140,760,30</area> - <!--<value>Percent Complete </value>--> - <value></value> - </textarea> - - <textarea name="recording_text" draworder="1" align="hcenter"> - <multiline>yes</multiline> - <font>biginfo</font> - <area>20,140,760,150</area> - <value></value> - </textarea> - - <!-- - next scheduled recording status - --> - - <textarea name="scheduled_label" draworder="1" align="center"> - <font>label</font> - <area>20,320,760,30</area> - <value></value> - </textarea> - - <textarea name="scheduled_text" draworder="1" align="hcenter"> - <multiline>yes</multiline> - <font>biginfo</font> - <area>20,400,760,120</area> - <value></value> - </textarea> - - <textarea name="mythvantage_text" draworder="1" align="right"> - <multiline>no</multiline> - <font>tinyinfo</font> - <area>20,560,760,30</area> - <value></value> - </textarea> - <!-- - scheduled recordings conflict warning - --> - - <textarea name="conflicts_text" draworder="1" align="center"> - <font>warning</font> - <area>20,490,760,30</area> - <value>WARNING: There are conflicting scheduled recordings!</value> - </textarea> - - <!-- - start frontend button - - <textbutton name="startfrontend_button" draworder="1"> - <position>81,535</position> - <font>buttons</font> - <image function="on" filename="mw_text_button_on.png"></image> - <image function="off" filename="mw_text_button_off.png"></image> - <image function="pushed" filename="mw_text_button_pushed.png"></image> - </textbutton> - - --> - - </container> - - </window> - -</mythuitheme> diff --git a/abs/core/live-installer/install_db_chroot.sh b/abs/core/live-installer/install_db_chroot.sh deleted file mode 100755 index 514dd3c..0000000 --- a/abs/core/live-installer/install_db_chroot.sh +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash -. /etc/profile -. /etc/systemconfig -#myhost=`cat /etc/hostname` -myhost=$hostname -hostname $myhost -mount -t proc none /proc -pacman --noconfirm -Sf mysql -/etc/rc.d/mysqld - -status=1 -mysqlstatus=1 -while [ ! $status = 0 ] -do - /etc/rc.d/mysqld stop - sleep 1 - /etc/rc.d/mysqld start - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql -e "show databases;" - showstatus=$? - if [ $showstatus = 0 ] - then - pacman --noconfirm -R mythdb-initial - pacman --noconfirm -S mythdb-initial - $MV_ROOT/bin/restore_default_settings.sh -c load - DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install - if [ $SystemType = "Master_backend" ] - then - $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - fi - #update database to allow user jobs on this host. - $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW - $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - #if [ -d /data/srv/mysql/mythconverg ] - if [ -d /var/lib/mysql/mythconverg ] - then - # pacman --noconfirm -R webcalendar - # pacman --noconfirm --nodeps -S webcalendar - status=0 - fi - fi - fi -done -#/etc/rc.d/mysqld stop -#umount /proc - - - diff --git a/abs/core/live-installer/install_functions.sh b/abs/core/live-installer/install_functions.sh deleted file mode 100755 index 0c43c97..0000000 --- a/abs/core/live-installer/install_functions.sh +++ /dev/null @@ -1,484 +0,0 @@ -#!/bin/bash -. /etc/profile -disk=$2 -mountpoint=new_boot - -#------------------------------------------- -MYTHDBUSER=mythtv -MYTHTVPASSWD=mythtv -CMDLINE=$(cat /proc/cmdline) -hostname=`hostname` -MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec" -BASE="" - -function update_db_settings () { - - $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";" -} - -function random_theme () { -THEMES="basic-blue -basic-green -basic-red -basic-purple -basic-amber" - -theme=($THEMES) # Read into array variable. - -num_themes=${#theme[*]} # Count how many elements. - -pick=${theme[$((RANDOM%num_themes))]} -echo "Selected $pick as the theme" -update_db_settings Theme "$pick" -} - - -function setupremote { - mv $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` - if [ -d $TEMPLATES/remotes/$Remotetype ] - then - cd $TEMPLATES/remotes/$Remotetype - for i in lircd* - do - cat $i >> $BASE/etc/lircd.conf - done - cp lircrc $BASE/etc/lircrc - chmod 755 /etc/lircrc - update_db_settings HostRemoteType "$Remotetype" - /usr/sbin/lircd -d /dev/lirc0 - mkdir /root/.mythtv - ln -s /etc/lircrc /root/.mythtv/lircrc - fi -} - -function scan_for_usb_remote () { -echo "Scanning for usb receiver/remote" -while read line -do - USBID=`echo "$line"|cut -f1` - lsusb -d "$USBID" > /dev/null 2>/dev/null - if [ $? = 0 ] - then - Remotetype=`echo "$line"|cut -f2` - echo "found $Remotetype" - setupremote - break - fi -done <$BASE/$TEMPLATES/remotes/receiver_usb.id -} - -function rest_of_network () { - #netmask - echo $CMDLINE | grep -q netmask - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*netmask=} - NETMASK=${TEMPVAR%% *} - /sbin/ifconfig eth0 $IP netmask $NETMASK - nm=`/usr/bin/nmconv.py -obits $NETMASK` - NETMASK="/$nm $NETMASK" - echo $NETMASK - update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK" - else - echo "netmask not found" - fi - #gateway - echo $CMDLINE | grep -q gateway - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*gateway=} - GATEWAY=${TEMPVAR%% *} - /sbin/route add default gw $GATEWAY - update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY" - - else - echo "gateway not found" - fi - - #dns - echo $CMDLINE | grep -q dns - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*dns=} - DNS=${TEMPVAR%% *} - echo "nameserver $DNS" >> /etc/resolv.conf - update_db_settings HostDNS${MYTHDEFAULT} "$DNS" - else - echo "DNS not found" - fi -} - -function init_network { - echo $CMDLINE |grep -q netdev - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*netdev=} - MYTHDEFAULT=${TEMPVAR%% *} - else - MYTHDEFAULT="eth0" - fi - - - - echo $CMDLINE | grep -q ip - if [ $? = 0 ] - then - update_db_settings HostDefaulteth0 0 - update_db_settings HostDefault${MYTHDEFAULT} 1 - - update_db_settings HostActiveonbooteth0 0 - update_db_settings HostActiveonboot${MYTHDEFAULT} 1 - update_db_settings HostNetDevice ${MYTHDEFAULT} - - TEMPVAR=${CMDLINE#*ip=} - IP=${TEMPVAR%% *} - if [ x$IP = xdhcp ] - then - /sbin/dhcpcd $MYTHDEFAULT - update_db_settings HostUseDHCP${MYTHDEFAULT} 0 - else - /sbin/ifconfig ${MYTHDEFAULT} $IP - update_db_settings HostUseDHCP${MYTHDEFAULT} 1 - update_db_settings HostIP${MYTHDEFAULT} "$IP" - rest_of_network - fi - fi -} - -function init_remote { - echo $CMDLINE | grep -q remoteport - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*remoteport=} - REMOTEPORT=${TEMPVAR%% *} - if [ x"$ReceiverType" = "xSerial" ] - then - if [ -e /dev/$REMOTEPORT ] - then - /usr/bin/setserial /dev/$REMOTEPORT uart none - /sbin/modprobe lirc_serial - update_db_settings HostReceiverType Serial - update_db_settings HostSerialPortlirc "$REMOTEPORT" - fi - fi - - fi - - echo $CMDLINE | grep -q remote - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*remote=} - Remotetype=${TEMPVAR%% *} - setupremote - else - scan_for_usb_remote - fi -} - -#----------------------- - -#set -x - -partition_it () { -ROOT=$1 -DATA=$2 -SWAP=$3 - -if [ ! x$SWAP = xNO ] - then - SWAPLINE=",$SWAP,S" - MKSWAPCMD="mkswap /dev/${disk}2" - else - SWAPLINE=",0,0" - MKSWAPCMD="" - fi - -if [ x$DATA = xALL ] -then - DATALINE=",,," - EXTRALINE="" -else - DATALINE=",$DATA,," - EXTRALINE=",0,," -fi -sfdisk /dev/$disk -uM << EOF -,$1,,* -$SWAPLINE -$DATALINE -$EXTRALINE -; -EOF - -$MKSWAPCMD -#sfdisk -l /dev/$disk -} - - -function fscmd () { - -case $1 in - reiserfs) FSCMDC="mkreiserfs -q -l ROOT" - ;; - - xfs) FSCMDC="mkfs -t $1 -f" - ;; - ext3) FSCMDC="mkfs.ext3" - ;; - jfs) FSCMDC="mkfs.jfs -q " - ;; - *) FSCMDC="echo $1" - ;; - -esac -} - -format_it () { - fscmd $1 - $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n - fscmd $2 - $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n -} - -mount_it () { - if [ ! -d \/$mountpoint ] - then - mkdir \/$mountpoint - fi - mount /dev/${disk}1 \/$mountpoint - mkdir \/$mountpoint/data - mount /dev/${disk}3 \/$mountpoint/data -} - -unmount_it () { - umount /dev/${disk}1 - umount /dev/${disk}3 -} - -#linux-live version of copy_it -# copy_it () { -# #rsync -rvp --exclude=/mnt --exclude=\/$mountpoint / \/$mountpoint -# lzmdir=`find /mnt/live/mnt -name data.lzm -execdir pwd \;| tail -1` -# cd $lzmdir -# if [ x$1 = xALL ] -# then -# LIST=`ls *.lzm` -# else -# LIST=`echo $1 | tr , " " ` -# fi -# -# for i in $LIST -# do -# echo "Transferring $i" -# lzm2dir $i \/$mountpoint -# done -# for i in sys proc dev tmp -# do -# mkdir /$mountpoint/$i -# -# done -# chmod 777 /$mountpoint/tmp -# mknod /$mountpoint/dev/null c 1 3 -# mknod /$mountpoint/dev/null c 1 5 -# mknod /$mountpoint/dev/console c 5 1 -# chmod +s /$mountpoint/usr/bin/Xorg -# chmod +s /$mountpoint/usr/bin/crontab -# chmod +s /$mountpoint/usr/bin/sudo -# chmod +s /$mountpoint/bin/mount -# -# } - -copy_it () { - - if [ x$1 = xALL ] - then - echo "Transferring system" - unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf - else - echo "Upgrading system" - unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf - fi - - for i in sys proc dev tmp - do - mkdir /$mountpoint/$i - - done - chmod 777 /$mountpoint/tmp - mknod /$mountpoint/dev/null c 1 3 - mknod /$mountpoint/dev/null c 1 5 - mknod /$mountpoint/dev/console c 5 1 - chmod +s /$mountpoint/usr/bin/Xorg - chmod +s /$mountpoint/usr/bin/crontab - chmod +s /$mountpoint/usr/bin/sudo - chmod +s /$mountpoint/bin/mount - -} - - -device_node () { - cd /dev - mknod hda b 3 0 - mknod hda1 b 3 1 - mknod hda2 b 3 2 - mknod hda3 b 3 3 - mknod hda4 b 3 4 - mknod hda5 b 3 5 - mknod hda6 b 3 6 - mknod hda7 b 3 7 - mknod hda8 b 3 8 - mknod sda b 8 0 - mknod sda1 b 8 1 - mknod sda2 b 8 2 - mknod sda3 b 8 3 - mknod sda4 b 8 4 - mknod sda5 b 8 5 - mknod sda6 b 8 6 - mknod sda7 b 8 7 - mknod sda8 b 8 8 - mknod sdb b 8 16 - mknod sdb1 b 8 17 - mknod sdb2 b 8 18 - mknod sdb3 b 8 19 - mknod sdb4 b 8 20 - mknod sdb5 b 8 21 - mknod sdb6 b 8 22 - mknod sdb7 b 8 23 - mknod sdb8 b 8 24 - cd - - } - - -function create_fstab() -{ -echo "creating fstab" -cat > /$mountpoint/etc/fstab << EOF -# <file system> <dir> <type> <options> <dump> <pass> -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 -/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0 -/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0 -UUID=ROOTUID / auto defaults 0 1 -UUID=DATAUID /data auto defaults 0 1 -UUID=SWAPUID swap swap defaults 0 0 -EOF - - -} - - -function find_uuid() { - uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2` - echo $uuid for $1 - FOUNDUUID=$uuid - -} - - -case $1 in - partition_it ) - #drive ROOT DATA(ALL) SWAP(NO) - for i in `mount | grep $disk | awk ' { print $1 } '` - do - umount $i - done - swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '` - swapoff $swap - partition_it $3 $4 $5 - exit 0 - - ;; - format_it ) - device_node - - format_it $3 $4 - exit 0 - ;; - mount_it ) - mount_it - ;; - copy_it ) - copy_it $3 - - ;; - - - fstab_fix_it) - echo $@ >> /tmp/fstab.input - if [ ! -f /$mountpoint/etc/fstab ] - then - create_fstab - fi - if [ x$5 = xUPGRADE ] - then - cp -f /tmp/etc/fstab /$mountpoint/etc/fstab - fi - -# if [ x$5 = xFULL_INSTALL ] -# then - #search for UUID - FOUNDUUID="" - find_uuid ${2}1 - ROOTUUID=$FOUNDUUID - echo "--" - echo $ROOTUUID - echo "--" - FOUNDUUID="" - find_uuid ${2}2 - SWAPUUID=$FOUNDUUID - - FOUNDUUID="" - find_uuid ${2}3 - DATAUUID=$FOUNDUUID -# fi - - - - - - sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab - sed -i -e "s/.*\/data\ .*$/UUID=$DATAUUID \/data auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab - sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab - -# sed -e "s/\ \/\ .*$/\ \/ $3 defaults 0 1/g"\ -# -e "s/\ \/data .*$/\ \/data $4 defaults 0 1/g" /$mountpoint/etc/fstab > /tmp/fstab -# -# -# cp /tmp/fstab /$mountpoint/etc/fstab - ;; - - grub_it ) - #linux-live - #grub-install --recheck --no-floppy --root-directory=/$mountpoint /dev/$disk - grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)" - - - #fixing fstab -# if [ ! -f /$mountpoint/etc/fstab ] -# then -# cp -f /$mountpoint/etc/fstab.install /$mountpoint/etc/fstab -# fi -# sed -e s/hda/$disk/g /$mountpoint/etc/fstab > /tmp/newfstab -# cp -f /tmp/newfstab /$mountpoint/etc/fstab - - #fixing grub/menu.1st - FOUNDUUID="" - find_uuid ${disk}1 - ROOTUUID=$FOUNDUUID -# sed -e s/hda/$disk/g /$mountpoint/boot/grub/menu.lst > /tmp/menu.lst - - sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst - - -#cp -f /tmp/menu.lst /$mountpoint/boot/grub/menu.lst - #cp /etc/X11/xorg.conf /$mountpoint/etc/X11/xorg.conf - mkinitcpio -g /$mountpoint/boot/kernel26.img - ;; - umount_it) - - umount \/$mountpoint/data - umount \/$mountpoint -esac - - - diff --git a/abs/core/live-installer/install_proxy.sh b/abs/core/live-installer/install_proxy.sh deleted file mode 100755 index ec7f29c..0000000 --- a/abs/core/live-installer/install_proxy.sh +++ /dev/null @@ -1,481 +0,0 @@ -#!/bin/bash -#chroot and /tmp -MVHOSTNAME=mvi -. /etc/profile -TEMP_TEMPLATES=/tmp/templates -disk=$2 -rootfs=$3 -rootsize=$4 -datafs=$5 -datasize=$6 -swapsize=$7 -mountpoint="/new_boot" -run=$MV_ROOT/bin/install_functions.sh -. /etc/systemconfig 2>/dev/null -. $MV_ROOT/bin/networkconfig.sh -CMDLINE=$(cat /proc/cmdline) - -#TEMPNET="Hostip"$default_interface -#eval MYTHIP=\$${TEMPNET} - - -progress () { -mypercent=`echo "$1" | cut -d. -f1` -if [ x$mypercent = x ] -then -echo "" > /tmp/.install_percent -else -echo "${mypercent}% complete" > /tmp/.install_percent -fi - - -} - - - - -full_install () { - if [ -f /tmp/.this_is_upgrade ] - then - rm /tmp/.this_is_upgrade - fi - echo "Partitioning $disk" > /tmp/.install_state - progress 1 - sleep 1 - $run partition_it $disk $rootsize $datasize $swapsize - - echo "Formatting $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs $datafs - - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Installing data" > /tmp/.install_state - - sleep 1 - $run copy_it $disk ALL - rm $mountpoint/etc/fstab - $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL - - progress 99 - sleep 1 - $run grub_it $disk - - - echo "Configuring system" > /tmp/.install_state - progress 100 - sleep 1 - cp -f /etc/systemconfig "$mountpoint"/etc - #run save syssettings to save settings, then copy to new mountpoint - $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d 127.0.0.1 - SE=$TEMPLATES/settings/syssettings - mkdir -p ${mountpoint}$SE - cp -rp $SE/* ${mountpoint}$SE/ - chown root:mythtv "$mountpoint"/etc/systemconfig - chown -R mythtv:mythtv ${mountpoint}$SE - - chmod -R 775 ${mountpoint}$SE - chmod 775 "$mountpoint"/etc/systemconfig - #copy over any updates that might have occured - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - cp /etc/mtab "$mountpoint"/etc/mtab - - - if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] - then - #installing DB to local machine - #turn off old live database, so the chroot one can start - /etc/rc.d/mysqld stop - mount --bind /dev "$mountpoint/dev" - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - echo "stopping mysql in chroot" - chroot "$mountpoint" /etc/rc.d/mysqld stop - umount "$mountpoint/dev" - - #/etc/rc.d/mysqld start - else - #update remotedb with this host settings - chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - if [ ! $? = 0 ] - then - touch $mountpoint/tmp/.dbsysfailed - chmod 777 $mountpoint/tmp/.dbsysfailed - else - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - fi - fi - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced - echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ - $run unmount_it $disk -} - -function createsquashlist(){ -if [ -f $1 ] -then - rm -f -$1 -fi -for i in bin boot etc home lib opt root sbin usr var -do -echo $i >> $1 -done - - -} - - - - -function upgrade () { - touch /tmp/.this_is_upgrade - - if [ ! x$rootfs = "xDo_not_format" ] - then - echo "Formatting $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs NO - fi - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Installing data" > /tmp/.install_state - sleep 1 - cp -rf /tmp/etc /new_boot/etc.old - cp -rf /tmp/oss /new_boot/var/lib/oss.old - #$run copy_it $disk bin.lzm,boot.lzm,etc.lzm,home.lzm,lib.lzm,opt.lzm,root.lzm,sbin.lzm,usr.lzm,var.lzm - SQUASHLIST="/tmp/.squashlist" - createsquashlist $SQUASHLIST - $run copy_it $disk $SQUASHLIST - #copy back ssh keys - - cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ - cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/ - - #funckeys - cadir=/etc/pki/func/ca - mv /new_boot/etc/pki /new_boot/etc/pki.new - cp -rp /new_boot/etc.old/pki /new_boot/etc/ - #passwd/shadow/group - cp -fp /new_boot/etc.old/passwd /new_boot/etc/ - cp -fp /new_boot/etc.old/shadow /new_boot/etc/ - cp -fp /new_boot/etc.old/group /new_boot/etc/ - - if [ x$rootfs = "xDo_not_format" ] - then - #rootfs=`grep ${disk}1 /tmp/etc/fstab |awk ' { print $3 } '` - rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '` - fi - #datafs=`grep ${disk}3 /tmp/etc/fstab |awk ' { print $3 } '` - datafs=`grep \/data /tmp/etc/fstab |awk ' { print $3 } '` - $run fstab_fix_it $disk $rootfs $datafs UPGRADE - - echo "Writing boot sector" > /tmp/.install_state - progress 99 - sleep 1 - $run grub_it $disk - - - echo "Configuring system" > /tmp/.install_state - progress - sleep 1 - cp /etc/mtab "$mountpoint"/etc/mtab - cp -f /etc/systemconfig "$mountpoint"/etc - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - chown root:mythtv "$mountpoint"/etc/systemconfig - chmod 775 "$mountpoint"/etc/systemconfig - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - #wrap this in a network check_network, no need to update the db if the import worked. -##### do I need to start mysql? - chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - # - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install - - # fi - - echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ - $run unmount_it $disk -} - -function netboot-full_install () { - TEMPVAR=${CMDLINE#*nfsroot=} - NFSROOT=${TEMPVAR%% *} - NFSROOT=`echo $NFSROOT|cut -d: -f1` - MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -` - URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC" - echo "calling $URL" - echo "Starting" > /tmp/.install_state - curl $URL - ${MV_ROOT}/bin/xconfig.sh -} - -function killdhcp () { -if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] - then - pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /etc/dhcpc/dhcpcd-eth0.pid - rm -f /var/run/dhcpcd* - fi -if [ -f /var/run/dhcpcd-eth0.pid ] - then - pid=`cat /var/run/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /var/run/dhcpcd-eth0.pid* - fi -ip address flush dev eth0 -} - - -# function vnc_check() { -# CMDLINE=$(cat /proc/cmdline) -# echo $CMDLINE |grep -q vnc -# USEVNC=$? -# echo $CMDLINE |grep -q nfsroot -# NETBOOT=$? -# echo $USEVNC -# if [ ! x$USEVNC = x0 ] -# then -# echo "not using vnc" -# if [ ! x$NETBOOT = x0 ] -# then -# echo "not using netboot" -# else -# echo "using netboot" -# USEVNC=0 -# fi -# -# else -# echo " using vnc" -# fi -# } - - -# function network_setup () { -# DEVICE=eth0 -# if [ ! -f /etc/systemconfig ] -# then -# exit 1 -# fi -# -# if [ ! x$USEVNC = x0 ] -# then -# echo "Resetting the network" -# killdhcp -# if [ $UseDHCP = 0 ] -# then -# /sbin/dhcpcd $DEVICE -# if [ ! $? = 0 ] -# then -# exit 2 -# fi -# fi -# else -# echo "using vnc/netboot, will not reset network" -# echo "nameserver $nameserver" > /etc/resolv.conf -# return 0 -# fi -# -# if [ $UseDHCP = 1 ] -# then -# -# /sbin/ifconfig $DEVICE $ip -# /sbin/route add default gw $route -# echo "nameserver $nameserver" > /etc/resolv.conf -# -# fi -# -# -# } - -function SANE_SYSETTINGS () { -sed -e '/HOSTrootfstype/d' \ - -e '/HOSTrootfstype/d' \ - -e '/HOSTdatafstype/d' \ - -e '/HOSTOSsize/d' \ - -e '/HostUseALLdata/d' \ - -e '/HOSTDATAsize/d' \ - -e '/HOSTuprootfstype/d' \ - -e '/HostUseSWAP/d' \ - -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new - mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt -} - -case $1 in - full_install_it ) full_install ;; - - NETBOOT) -echo "-----------------------------------------------------------------------3-----" - netboot-full_install ;; - - find_update) - #TRY TO mount first partition of drive - #copy /etc/systemconfig to live, import settings into db - #umount drive - $run mount_it $disk - if [ -f /new_boot/etc/systemconfig ] - then - ###########ADD templates - mkdir -p $TEMP_TEMPLATES - cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES - SANE_SYSETTINGS - cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/ - - - cp /new_boot/etc/systemconfig /etc/systemconfig - cp -rf /new_boot/etc /tmp/etc - cp -rf /new_boot/var/lib/oss /tmp/oss - - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 - fi - $run umount_it $disk - ;; - - upgrade_it) - #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&" - upgrade - - ;; - disk_model_it) - model="unknown" - size="xxx" - case $2 in - - h* ) - model=`cat /proc/ide/$2/model` - ;; - s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` - ;; - esac - size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` - - - echo ""$model" $size " >/tmp/model - - ;; - network_check_it) - #Should never return from check_network - case $2 in - setup_network) - vnc_check - install_network_setup - ;; - - check_self) - myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - ping -c 1 $myipdefault - if [ ! $? = 0 ] - then - exit 3 - #can't ping yourself - fi - ;; - check_gw) - #check gateway - mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'` - if [ ! x$mygwdefault = x ] - then - ping -c 1 $mygwdefault - if [ ! $? = 0 ] - then - exit 4 - fi - fi - ;; - check_ns) - #check nameserver - mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` - ping -c 1 $mydns - if [ ! $? = 0 ] - then - exit 5 - fi - ;; - check_names) - host google.com - if [ ! $? = 0 ] - then - exit 6 - fi - ;; - host_names) - host $hostname - if [ $? = 0 ] - then - exit 7 - fi - ;; - - esac - exit 0 - ;; - - - * ) - state=`cat /tmp/.install_state` - if [ x"${state}" = "xConfiguring system" ] - then - progress "" - else - - if [ -f /tmp/.startsize.io ] - then - . /tmp/.startsize.io - #finding the drive - ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 ` - used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "` - used=`echo $used-$STARTSIZE|bc` - #echo $used - fi - - if [ ! x$used = x ] - then - . /root/.install_size - #somehow find if it's an install or update - if [ -f /tmp/.this_is_upgrade ] - then - total=$UPGRADESIZE - else - total=$TOTALSIZE - fi - percent=`echo "scale=2 ; ($used/$total) * 100 " |bc ` - cond2=$(echo "$percent > 100" |bc ) - if [ $cond2 -eq 1 ] - then - percent=100 - fi - cond3=$(echo "$percent < 3" |bc ) - if [ $cond3 -eq 0 ] - then - progress $percent - fi - fi - fi - ;; -esac - - - diff --git a/abs/core/live-installer/issue b/abs/core/live-installer/issue deleted file mode 100644 index 3c01679..0000000 --- a/abs/core/live-installer/issue +++ /dev/null @@ -1 +0,0 @@ -LinHes
\ No newline at end of file diff --git a/abs/core/live-installer/live-install.sh b/abs/core/live-installer/live-install.sh deleted file mode 100755 index 573bb1f..0000000 --- a/abs/core/live-installer/live-install.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -#redirect stderr to stdout, then rediret stdout to file -. /etc/profile -exec 2>&1 -exec > /tmp/mythvantage_install.log -. /etc/X11/STBWINDOWMANAGER -/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 -keylaunch & -/usr/bin/tilda & -/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & -export MALLOC_CHECK_=0 -if [ -f /opt/vmware/bin32/vmware-user-wrapper ] -then - /opt/vmware/bin32/vmware-user-wrapper & -fi -xhost + -CMDLINE=$(cat /proc/cmdline) -echo $CMDLINE |grep -q nfsroot -NFSROOT=$? -if [ x$NFSROOT = x1 ] -then - - unbuffer MythVantage & -else - NETBOOT=YES MythVantage & -fi - -exec $STBWINDOWMANAGER diff --git a/abs/core/live-installer/live.install b/abs/core/live-installer/live.install deleted file mode 100644 index a0a9d31..0000000 --- a/abs/core/live-installer/live.install +++ /dev/null @@ -1,78 +0,0 @@ -# This is a default template for a post-install scriptlet. You can -# remove any functions you don't need (and this header). - -# arg 1: the new package version -pre_install() { - rm -f /etc/issue - rm -f /etc/arch-release - -} - -# arg 1: the new package version -post_install() { - if [ ! -f /etc/blacklist.package ] - then - echo "List of packages to ignore" > /etc/blacklist.package - echo "one package per line" >> /etc/blacklist.package - fi - -LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage" -LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage" -for i in "$LINE" "$LINE1" -do - cp /etc/sudoers /etc/sudoers.bak - grep -q "$i" /etc/sudoers - if [ $? != 0 ] - then - echo "$i" >> /etc/sudoers - visudo -cf /etc/sudoers - if [ ! $? = 0 ] - then - cp /etc/sudoers.bak /etc/sudoers - echo $i - echo "Error adding files" - exit 1 - fi - fi -done - - -} - -# arg 1: the new package version -# arg 2: the old package version -pre_upgrade() { - /bin/true -} - -# arg 1: the new package version -# arg 2: the old package version -post_upgrade() { - . /etc/profile - ps -ef|grep mysqld|grep -v grep - status=$? - echo "status $status" - if [ $status = 0 ] - then - restore_default_settings.sh -c load - fi - if [ ! -f /etc/blacklist.package ] - then - echo "List of packages to ignore" > /etc/blacklist.package - echo "one package per line" >> /etc/blacklist.package - fi -} - -# arg 1: the old package version -pre_remove() { - /bin/true -} - -# arg 1: the old package version -post_remove() { - /bin/true -} - -op=$1 -shift -$op $* diff --git a/abs/core/live-installer/networkconfig.sh b/abs/core/live-installer/networkconfig.sh deleted file mode 100644 index 61a7405..0000000 --- a/abs/core/live-installer/networkconfig.sh +++ /dev/null @@ -1,280 +0,0 @@ -#!/bin/bash -#. /etc/profile -#. /etc/systemconfig -#BASE=/tmp -ETCNETDIR=$BASE/etc/net/ifaces - - - -function kill_dhcp () -{ -for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid -do - if [ -f ${i} ] - then - pid=`cat ${i}` - kill -9 $pid - rm -f ${i} - fi - if [ x$1 = xflush ] - then - for ifdev in eth0 wlan0 eth1 wlan1 - do - echo ${i} |grep $ifdev - status=$? - if [ $status = 1 ] - then - ip address flush $ifdev - fi - done - fi - -done - -} - -function setup_nameserver(){ -grep -q $1 ${BASE}/etc/resolv.conf -status=$? -if [ ! $status = 0 ] -then - echo "nameserver $1" >> ${BASE}/etc/resolv.conf -fi - -} - -function setup_interfaces() { - local IS_WIRELESS - local ip - local netmask - local isactive - local dns - local UseDHCP - local GW - local ESSID - local KEY - local ENCRYPT - local TEMPNET - IS_WIRELESS=false - - #local ip - TEMPNET="Hostip"$1 - echo $TEMPNET - eval ip=\$${TEMPNET} - - TEMPNET=Hostnetmask$1 - eval netmask=\$${TEMPNET} - netmask=`echo "$netmask" | cut -d " " -f1` - - TEMPNET=HostActive$1 - eval isactive=\$${TEMPNET} - - TEMPNET=HostDNS$1 - eval dns=\$${TEMPNET} - - TEMPNET="HostUSEDHCP"$1 - eval UseDHCP=\$${TEMPNET} - - TEMPNET=HostGW$1 - eval GW=\$${TEMPNET} - - - - if [ $1 = wlan0 -o $1 = wlan1 ] - then - IS_WIRELESS=TRUE - TEMPNET=HostESSID$1 - eval ESSID=\$${TEMPNET} - - TEMPNET="HostKey"$1 - eval KEY=\$${TEMPNET} - - TEMPNET=HostUseEncryption$1 - eval ENCRYPT=\$${TEMPNET} - fi - - - echo "Setup $1 in progress, wireless: $IS_WIRELESS" - - if [ ! -d $ETCNETDIR/$1 ] - then - mkdir -p $ETCNETDIR/$1 - fi - - if [ ! -f $ETCNETDIR/$1/options ] - then - cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options - fi - - if [ x$isactive = x0 ] - then - echo "setting $1 to inactive" - sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options - - else - echo "setting $1 to active" - sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options - fi - - if [ x$IS_WIRELESS = xTRUE ] - then - echo "setting $1 wireless" - sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options - #set the key and essid - echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig - if [ x$ENCRYPT = x1 ] - then - echo "key $KEY" >> $ETCNETDIR/$1/iwconfig - fi - - else - echo "disabling wireless" - sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options - fi - - - - - if [ $UseDHCP = 0 ] - then - echo using dhcp - sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options - - else - echo "using static ip" - sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options - echo "default via $GW" > $ETCNETDIR/$1/ipv4route - echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address - setup_nameserver $dns - fi -} - - -function find_active () { -#HostActiveeth1="1" -rm -f ${BASE}/etc/resolv.conf -if [ x$MYTHDHCP = x1 ] - then - #add 127.0.0.1 to /etc/resolv.conf - echo "search lan" > ${BASE}/etc/resolv.conf - echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf - fi - -for i in eth0 eth1 wlan0 wlan1 -do - CURRENTIF="HostActive"$i - eval IFSTATE=\$${CURRENTIF} - if [ x$IFSTATE = x1 ] - then - setup_interfaces $i - fi -done -} - -function setup_hostname { -#set the hostname -if [ ! x$hostname = x ] -then - echo $hostname > ${BASE}/etc/hostname - cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts - #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts - - if [ x$MYTHDHCP = x1 ] - then - echo "127.0.0.1 localhost " > ${BASE}/etc/hosts - echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts - else - echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts - fi - cat /tmp/hosts >> ${BASE}/etc/hosts -fi - -kill_dhcp -} - -function vnc_check() { - CMDLINE=$(cat /proc/cmdline) - echo $CMDLINE |grep -q vnc - USEVNC=$? - echo $CMDLINE |grep -q nfsroot - NETBOOT=$? - echo $USEVNC - if [ ! x$USEVNC = x0 ] - then - echo "not using vnc" - if [ ! x$NETBOOT = x0 ] - then - echo "not using netboot" - else - echo "using netboot" - USEVNC=0 - fi - - else - echo " using vnc" - fi -} - -function setup_MYTH_vars { - TEMPMYTH="Hostip"$default_interface - #echo $TEMPMYTH - eval MYTHIP=\$${TEMPMYTH} - - TEMPMYTH="HostUSEDHCP"$default_interface - eval MYTHDHCP=\$${TEMPMYTH} - - - -} - - - -function setup_network { - setup_MYTH_vars - setup_hostname - find_active -} - -function start_network { -if [ ! $USEVNC = 0 ] -then - /etc/net/scripts/network.init restart - -else - echo "VNC/NETBOOT in use, will NOT restart network" -fi - -} - -function stop_network { -if [ ! $USEVNC = 0 ] -then - echo "stopping the network" - kill_dhcp flush - ip address flush dev eth0 2>&1 >/dev/null - ip address flush dev eth1 2>&1 >/dev/null - ip address flush dev wlan0 2>&1 >/dev/null - ip address flush dev wlan1 2>&1 >/dev/null -else - echo "VNC/NETBOOT in use, will NOT restart network" -fi - -} - - -#this is used by the install process to start the network -function install_network_setup { - setup_MYTH_vars - setup_hostname - stop_network - find_active - start_network - -} - - - - - - - diff --git a/abs/core/live-installer/remove_service.sh b/abs/core/live-installer/remove_service.sh deleted file mode 100755 index 6cc4b4f..0000000 --- a/abs/core/live-installer/remove_service.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -SERVICE_DIR=/var/service -SCRIPT_DIR=/etc/sv -if [ -e $SERVICE_DIR/$1 ] -then - echo "removing" - rm $SERVICE_DIR/$1 -fi diff --git a/abs/core/live-installer/restore_default_settings.sh b/abs/core/live-installer/restore_default_settings.sh deleted file mode 100755 index e2b7044..0000000 --- a/abs/core/live-installer/restore_default_settings.sh +++ /dev/null @@ -1,325 +0,0 @@ -#!/bin/bash -. /etc/profile -. /etc/systemconfig -shopt -s -o nounset -echo $@ >> /tmp/restore.out -#TEMPLATES="/usr/share/templates/settings" -TEMPLATES="$TEMPLATES/settings" -TABLES="settings keybindings" -MYTHDBUSER=mythtv -MYTHTVPASSWD=mythtv -declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho" -Thistemplate="" -declare -i OVERRIDE=0 -declare -i EVERYTHING=0 - -function CMD_DEFINE () { - #add override check - if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ] - then - MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" - MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" - MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";" - else - MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" - MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" - MYSQLCMD_UPDATE_HOST="select hostname from settings;" - fi -} - -function SQL_DEFINE () { - #$1 is the table name - if [ $1 = "settings" ] - then - ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )" - else - ALTERSQL=";" - fi - - CREATESQL="create table temp_${1}_${hostname} like $1;" - COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");" - INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" - #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" - DROPSQL="delete from $1 where hostname=\"$hostname\";" - COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");" - DROP_TABLE="Drop table temp_${1}_${hostname}" -} - -function ARG_ERR() { - if [ x$OPTARG = "x" ] - then - echo "$SWITCH NEEDS AND ARG" - exit 11 - fi -} - -function ALSADEVICE () { -#ALSA:hw:1,4 - if [ x$Audiotype = xALSA ] - then - SoundDevice=ALSA:$SoundDevice - fi -} - - - -if [ $# -eq 0 ] -then - echo "Valid options are:" - echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)" - echo " -t (syssettings)" - echo " -d databasename" - echo " -h hostname" - echo " -s systemtype (master|slave|standalone|frontendonly)" - echo " -a ipaddress" - echo " -z zipcode" - echo " -o override (only used upgrade installs)" - exit 1 -fi - - - - -while getopts "$OPTSTRING" SWITCH -do - case $SWITCH in - # \?) echo "unkown option" - # exit 11 ;; - c) echo "$SWITCH" "$OPTARG" - ARG_ERR - OPERATION=$OPTARG - ;; - t) echo "$SWITCH" "$OPTARG" - ARG_ERR - Thistemplate=$OPTARG - - if [ x$Thistemplate = x"syssettings" ] - then - echo "" - else - echo "invalid template name" - exit 1 - fi - ;; - d) echo "$SWITCH" "$OPTARG" - ARG_ERR - if [ $OVERRIDE = 1 ] - then - ovdbhost=$OPTARG - else - dbhost=$OPTARG - fi - ;; - h) echo "$SWITCH" "$OPTARG" - ARG_ERR - if [ $OVERRIDE = 1 ] - then - oldhostname=$hostname - hostname=$OPTARG - else - hostname=$OPTARG - fi - - ;; - s) echo "$SWITCH" "$OPTARG" - ARG_ERR - SYSTEMTYPE=$OPTARG - ;; - a) echo "$SWITCH" "$OPTARG" - ARG_ERR - IP_ADDRESS=$OPTARG - ;; - z) echo "$SWITCH" "$OPTARG" - ARG_ERR - ZIPCODE=$OPTARG - ;; - o) OVERRIDE=1 - ;; - - esac -done - -echo $OVERRIDE - -#setup the Mysql commands -CMD_DEFINE - -$MYSQLCMD_C "show tables" > /dev/null -status=$? -if [ $status = 1 ] -then - echo "$@ failed" - echo "$@ failed" >> /tmp/restore.out - exit 1 -fi - - - - - - - -case $OPERATION in - - restore) - #used to restore settings from syssettings - if [ -d $TEMPLATES/$Thistemplate ] - then - cd $TEMPLATES/$Thistemplate - for i in $TABLES - do - SQL_DEFINE $i - sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt - #echo $MYSQLCMD "$SELECTSQL" - echo $i - $MYSQLCMD "$CREATESQL" - $MYSQLCMD "$ALTERSQL" - $MYSQLCMD "$COPY_TMP_SQL" - $MYSQLCMD "$INSERTSQL" - $MYSQLCMD "$DROPSQL" - $MYSQLCMD "$COPY_BCK_SQL " - $MYSQLCMD "$DROP_TABLE " - #rm /tmp/$i.txt - done - else - echo "couldn't find $TEMPLATES/$Thistemplate" - fi - ;; - - save) - - if [ ! -d $TEMPLATES/$Thistemplate ] - then - mkdir -p $TEMPLATES/$Thistemplate - fi - - cd $TEMPLATES/$Thistemplate - for i in $TABLES - do - EXTRACLAUSE="" - case $i in - settings) - EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value" - SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt - ;; - keybindings) - SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt - ;; - esac - # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i - - done - ;; - - load) - - #will load both default_1 and default_2 unless either file is not found - for i in default_1 default_2 - do - if [ -f $TEMPLATES/$i/settings.txt ] - then - echo $i - for tablename in $TABLES - do - #create table - CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;" - $MYSQLCMD_C "$CREATESQL" - #truncate table - TRUNCATESQL="truncate ${tablename}_${i} " - $MYSQLCMD_C "$TRUNCATESQL" - #load table - INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';" - $MYSQLCMD_C "$INSERTSQL" - #update_hostname - UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; " - $MYSQLCMD_C "$UPDATEHOSTNAMESQL" - done - else - - echo "couldn't find $TEMPLATES/$i/settings.txt template to load" - fi - CREATESQL="create table IF NOT EXISTS settings_user1 like settings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS settings_user2 like settings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS settings_user3 like settings;" - $MYSQLCMD_C "$CREATESQL" - - CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - done -;; - - - - BECONFIG) - if [ $SYSTEMTYPE = "master" ] - then - $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';" - $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" - fi - - if [ $SYSTEMTYPE = "slave" ] - then - $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" - fi - ;; - ZIP) - $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";" - $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";" - ;; - MUSICFRONT) - ALSADEVICE - $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";" - #need to reload the settings. - systemconfig.sh reloadfe - ;; - MUSICMYTH) - ALSADEVICE - $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";" - ;; - uhostname) - #used when the hostname is changed. - TABLES="settings capturecard keybindings storagegroup recorded" - for i in $TABLES - do - USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;" - $MYSQLCMD_C "$USQL" - done - - ;; - USERJOBALLOW) - SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;" - $MYSQLCMD_C "$SQL" - ;; - - ACCESSCONTROL) - LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound" - - for i in $LIST - do - $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";" - done - SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;" - $MYSQLCMD_C "$SQL" - esac - -#SELECT * INTO OUTFILE 'data.txt' -# FIELDS TERMINATED BY ',' -# FROM table2; - - diff --git a/abs/core/live-installer/soundconfig.sh b/abs/core/live-installer/soundconfig.sh deleted file mode 100755 index 1adb447..0000000 --- a/abs/core/live-installer/soundconfig.sh +++ /dev/null @@ -1,248 +0,0 @@ -#!/bin/bash -. /etc/systemconfig -. /etc/profile -echo $@ >/tmp/audio.call -#set -x -BASE="" -. /etc/profile -#TEMPLATES="/usr/share/templates" -TESTFILE="$TEMPLATES/audio/space_battle_A.wav" -OSSinstalled="false" - -function testaudio () { - -ossplay -d$AUDIODEVICE $TESTFILE - -} - -function load_alsa() { - - remove_service.sh alsa-utils -# cd /lib/modules/2.6.21-STB - KER=`uname -r` - cd /lib/modules/$KER/kernel/ - tar -xvf alsa-$KER.tar - pacman -Sf --noconfirm alsa-lib - - depmod -a - cd - - udevsettle - udevsettle - udevtrigger - - add_service.sh alsa-utils - sleep 4 - sv start alsa-utils -} - - -function unload_alsa () { -#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}') - sv stop alsa-utils - remove_service.sh alsa-utils - rm -rf /dev/adsp* - rm -rf /dev/snd/* - rm -rf /dev/audio - modprobe -r $(lsmod |grep ^snd |awk '{print $1}') -} - -function unload_oss { - sv stop oss - soundoff - rm -rf /dev/dsp* - rm -rf /dev/oss* - rm -rf /dev/sndstat - remove_service.sh oss -} - -function installOSS { - echo "installing oss" - add_service.sh oss - sleep 4 - sv start oss -} - - -function SYNCXINE { -echo "modify xine config file" - if [ -f /data/home/mythtv/.xine/config ] - then - cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config - else - cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config - fi - - if [ x$Audiotype = xOSS ] - then - DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp ` - sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \ - -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \ - -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \ - -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \ - $TEMPLATES/xine.config > /data/home/mythtv/.xine/config - else - cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config - fi - -} - -function SYNCMPLAYER { -echo "modify mplayer not implmented yet" -} - -function SYNCMYTHMUSIC { -echo "sync mythmusic" -$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH -} - -function SYNCMYTHFRONTEND { -echo "sync mythfrontend" -$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT -} - - -function checkOSSinstalled () { - ossinfo 1>/dev/null - resultcode=$? - echo $resultcode - if [ $resultcode = 0 ] - then - OSSinstalled='true' - else - OSSinstalled='false' - fi -} - -function sound_config_system { - - if [ x$syncXine = x1 ] - then - SYNCXINE - fi - if [ x$syncMplayer = x1 ] - then - SYNCMPLAYER - fi - if [ x$syncMythMusic = x1 ] - then - SYNCMYTHMUSIC - fi - if [ x$syncMythFrontend = x1 ] - then - SYNCMYTHFRONTEND - fi - -} - -function loadsound (){ - checkOSSinstalled - if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] - #then - # if [ $OSSinstalled = "false" ] - then - while [ $OSSinstalled = "false" ] - do - unload_alsa - rm /tmp/.alsatest - installOSS - installOSS - sleep 2 - checkOSSinstalled - done - # fi - else - touch /tmp/.alsatest - unload_oss - load_alsa - load_alsa - rm /tmp/.alsatest - - fi - -} - - - - -#####################MAIN PROGRAM########################## - -declare -r OPTSTRING="i:t:d:" - -if [ $# -eq 0 ] -then - echo "Valid options are:" - echo " -i (oss|alsa) oss or alsa subsystem " - echo " -t (test|real|LOAD) " - echo " -d device" - exit 1 -fi - - - - -while getopts "$OPTSTRING" SWITCH -do - case $SWITCH in - \?) echo "unkown option" - exit 11 ;; - i) echo "$SWITCH" "$OPTARG" - AUDIOTYPE="$OPTARG" - ;; - d) echo "$SWITCH" "$OPTARG" - AUDIODEVICE=$OPTARG - ;; - t) echo "$SWITCH" "$OPTARG" - SOUNDOPTYPE="$OPTARG" - if [ x"$OPTARG" = xtest ] - then - TEST=true - else - TEST=false - fi - - - ;; - - esac -done - - - - -case $SOUNDOPTYPE in - REAL|real ) - loadsound - sound_config_system - ;; - test|TEST) - echo $@ > /tmp/audio.test - #loadsound - if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] - then - echo "testing OSS $AUDIODEVICE " - ossplay -d$AUDIODEVICE $TESTFILE - else - echo "testing ALSA $AUDIODEVICE " - aplay --device=$AUDIODEVICE $TESTFILE - fi - - ;; - - LOAD|load) - loadsound - ;; - esac - - -exit 0 - - - - - - - - - - - diff --git a/abs/core/live-installer/startx b/abs/core/live-installer/startx deleted file mode 100755 index 0ffdf8c..0000000 --- a/abs/core/live-installer/startx +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -. /etc/profile - -export USER=root -export HOME=/root -#TEMPLATES=/usr/share/templates - -CMDLINE=$(cat /proc/cmdline) -TEMPVAR=${CMDLINE#*ip=} -IP=${TEMPVAR%% *} -echo $CMDLINE |grep -q vnc -USEVNC=$? - -if [ x$USEVNC = x1 ] -then - $MV_ROOT/bin/xconfig.sh - cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install - startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail - else - #VNC - pacman -Sf --noconfirm tightvnc - cd /root - mkdir .vnc - echo mythvantage |vncpasswd -f > /root/.vnc/passwd - chmod 500 /root/.vnc/passwd - rm /root/.vnc/xstartup - ln -s /root/live-install.sh /root/.vnc/xstartup - vncserver -fi diff --git a/abs/core/live-installer/systemconfig.sh b/abs/core/live-installer/systemconfig.sh deleted file mode 100755 index 909119e..0000000 --- a/abs/core/live-installer/systemconfig.sh +++ /dev/null @@ -1,1255 +0,0 @@ -#!/bin/bash -################################################################### -#Script to configure your system based off the values in /etc/systemconfig -#Any changes made to config files will be removed when systemconfig.sh is run -# -#JM -################################################################### -#set -x -. /etc/profile -MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2` - -echo $@ >/tmp/systemconfig.call -echo "----------------------start of systemconfig $@ ----------------------" -BASE="" - -#TEMPLATES="/usr/share/templates" -. /etc/profile -. $MV_ROOT/bin/networkconfig.sh -PACMAN="pacman --noconfirm" -postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype` -PKGBLACKLIST=$BASE/etc/blacklist.package - -if [ x$1 = x"Mysql_only" ] - then - rm -f /tmp/mysql.txt - sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt - exit 0 - fi - - -if [ -f /etc/systemconfig ] -then - . /etc/systemconfig -TEMPNET="Hostip"$default_interface -echo $TEMPNET -eval MYTHIP=\$${TEMPNET} -else - echo "could not find /etc/systemconfig" - exit 1 -fi - - - -#----------------------------------------------------- - - -function setupmysql { -#setup mysql.txt to find the database servers - if [ $SystemType = "Master_backend" ] - then - if [ $MYTHDHCP = 0 ] - then - #this grabs eth0, as that is all thats supported. -# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig - ##logic to change master_serverip and backend_serverip in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - else - - dbhost=$MYTHIP - sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig - #logic to change dbhost in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - fi - fi - - if [ $SystemType = "Slave_backend" ] - then - if [ $MYTHDHCP = 0 ] - then - #this grabs eth0, as that is all thats supported. - #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - ##logic to change backend_serverip in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost - else - slavehost=$MYTHIP - - #logic to change backend_serverif in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost - fi - fi - - MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt - if [ $SystemType = "Standalone" ] - then - sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT - else - sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT - fi - rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt - rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt - if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ] - then - cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT - fi - - chmod 755 $MYSQLTXT - chown mythtv $MYSQLTXT - -} - -function setupmysqlnetwork(){ -MFILE=etc/my.cnf -grep "#skip-networking" $BASE/$MFILE -status=$? - - - - if [ $SystemType = "Standalone" ] - then - sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE - if [ $status = 0 ] - then - sudo sv restart mysql - echo "restarting mysql with no network" - fi - - fi - - if [ $SystemType = "Master_backend" ] - then - sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE - if [ $status = 1 ] - then - sudo sv restart mysql - echo "restarting mysql with network" - fi - - fi - - -} - - -function settimezone { -#set the timezone -if [ x"$timezone" = x ] -then - timezone="unknown" -fi -rm ${BASE}/etc/localtime -echo $timezone -ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime - sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf - - # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock - # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock - # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock -cp $TEMPLATES/rc.conf /etc/rc.conf - -} - - -function setupreceiver { - case $ReceiverType in - tinker) echo "do nothing" - ;; - Serial) echo "setup serial lirc" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage - /usr/bin/load-modules-mythvantage.sh - ;; - Usb-imon) echo "setup receiver-usb-imon" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage - /usr/bin/load-modules-mythvantage.sh - ;; - *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - ;; - esac - - -} - -function setupremote { - case $Remotetype in - no_remote) echo "No remote selected" - daemon_remove="lircd $daemon_remove" - ;; - tinker) echo "Remote in tinker mode" - ;; - *) echo "Setup remote" - mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` - cd $TEMPLATES/remotes/$Remotetype - for i in lircd* - do - cat $i >> ${BASE}/etc/lircd.conf - done - cp lircrc ${BASE}/etc/lircrc - if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] - then - cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc - cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf - fi - if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ] - then - cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf - fi - chmod 755 /etc/lircrc - daemon_add="lircd $daemon_add" - sv hup lircd - ;; -esac - -} - -function setupblaster { - #cd $TEMPLATES/transmit/$Blastertype - #for i in lircd* - #do - # cat lircd.conf >> ${BASE}/etc/lircd.conf - #done - # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` - sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh - chmod 755 ${BASE}/usr/bin/change_chan.sh - #channel change script change - setupremote - -} - -function setupevrouter { - if [ x$UseEvrouter = x1 ] - then - case x$EvrouterConfig in - xtinker ) - echo "do nothing for evrouter" - ;; - x ) echo "empty evrouter" - ;; - * ) echo "setup evrouter for $EvrouterConfig " - cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg - daemon_add="evrouter Xvfb $daemon_remove" - - ;; - esac - else - # disable evrouter - daemon_remove="evrouter Xvfb $daemon_remove" - fi - - - - -} - -function setupLCD { - case x$LCDtype in - xtinker) echo "do nothing" - ;; - xno_lcd) echo "disabling lcd" - sv down lcdd - /usr/bin/load-modules-mythvantage.sh UNLOAD LCD - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - daemon_remove="lcdd $daemon_remove" - ;; - x) echo "empty lcd" ;; - - *) echo "setup lcd" - if [ -f $TEMPLATES/LCD/$LCDtype/modules ] - then - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage - #should also modprobe - fi - - - if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] - then - cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc - # install="lcdproc $install" - daemon_add="lcdd $daemon_add" - /usr/bin/load-modules-mythvantage.sh - RESTART_FE="true" - RESTART_LCD="true" - fi - #check if lirc capable,if so then call setupremote - if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] - then - setupremote - fi - ;; - esac - -} - - - -function scrubnfs { - cp /etc/fstab $TEMPLATES/fstab.conf.template - grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab - } - -function setupfstab () { -# setupfstab $NFSserver $NFSshare $NFSmount - echo "$1 $2 nfs" >> ${BASE}/etc/fstab - if [ ! -e "$2" ] - then - mkdir -p "$2" - chown mythtv:mythtv "$2" - fi - if [ x$DCONFIG = x ] - then - mount $2 & - fi - -} - -function setupncidclient -{ - sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf -} - -function setupnciddaemon { - cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template - sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf - -} - -function setupntp () { -cat > ${BASE}/etc/ntp.conf << EOF -# default restrictions -restrict default noquery notrust nomodify -# NTP drift file - used to keep track of your system clocks -# time deviation -driftfile /etc/ntp.drift - -# NTP log file -logfile /var/log/ntp.log -# override the default restrictions here, servers that can query -restrict 192.168.0.0 mask 255.255.0.0 nomodify -restrict 10.0.0.0 mask 255.0.00 nomodify - -#servers to sync with -EOF - #this is used for backend or standlone types - if [ $1 = "1" ] - then - echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf - echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf - echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf - echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf - - else - echo "server $dbhost" >> ${BASE}/etc/ntp.conf - echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf - fi - - -} - -function setupplugins (){ - -pkglistinstall="" -pkglistremove="" -#default enabled -for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo -do -eval pkgvalue=\$${i} - -if [ x$pkgvalue = x ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - if [ x$pkgvalue = x1 ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - pkglistremove="$pkglistremove $i$postfix" - fi - fi - - - -done - - - -#default disabled - for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather - do -eval pkgvalue=\$${i} - -if [ x$pkgvalue = x ] - then - pkglistremove="$pkglistremove $i$postfix" - else - if [ x$pkgvalue = x1 ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - pkglistremove="$pkglistremove $i$postfix" - fi - fi - done -install="$pkglistinstall $install" -remove="$pkglistremove $remove" - -} -function LCDcheck () { - case x$LCDtype in - xtinker) echo "do nothing lcd " - ;; - xno_lcd) echo "no lcd " - ;; - xxosd) install="xosd lcdproc $install" - ;; - x) echo "lcd empty " - ;; - *) - install="lcdproc $install" - ;; -esac -} - - -function packages () { -#see which plugins need to be installed -echo " Starting to install Packages" -setupplugins -LCDcheck -if [ ! -f $PKGBLACKLIST ] -then - touch $PKGBLACKLIST -fi - for i in $remove - do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] - then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` - if [ $? = 0 ] - then - if [ $i = "mythweb$postfix" ] - then - pacman --noconfirm -R mythweb$postfix - echo removed $i - else - pacman --noconfirm -Rs $i - echo removed $i - fi - fi - else - echo "$i is black listed" - fi - done - # fi - - for i in $install - do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] - then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` - # echo $VAR |grep -vq error: - - if [ ! $? = 0 ] - then - pacman --noconfirm -Sf $i - echo installed $i - else - echo "$i already installed" - fi - else - echo "$i is black listed" - fi - done -} - -function daemons { -echo "Daemons on boot" - - for i in $daemon_remove - do - sv check $i 1>/dev/null - status=$? - if [ $status -eq 0 ] - then - sv down $i - fi - remove_service.sh $i - done - - - for i in $daemon_add - do - sv check $i 1>/dev/null - status=$? - add_service.sh $i - - if [ $status -eq 0 ] - then - case $i in - mysql*) sv hup $i - ;; - mythback*) sv hup $i - ;; - lirc* ) sv hup $i - ;; - frontend) sv check frontend 1>/dev/null - ;; - - smbd ) sv hup $i - ;; - nmbd ) sv hup $i - ;; - evrouter) sv restart $i - ;; - *) sv down $i - sleep 1 - sv up $i - ;; - esac - fi - - done - -} - - -function services -{ -ser_install="" -ser_daemon_add="" -ser_remove="" -ser_daemon_remove="" -if [ x$UseEvrouter = x1 ] -then - ser_daemon_add="evrouter Xvfb $ser_daemon_add" -else - ser_daemon_remove="evrouter Xvfb $ser_remove" -fi - -if [ x$RunDHCP = x1 ] -then - ser_daemon_add="dnsmasq $ser_daemon_add" - ser_install="dnsmasq mvpmc $ser_install" - -else - ser_daemon_remove="dnsmasq $ser_daemon_remove" - ser_remove="dnsmasq mvpmc $ser_remove" -fi - -if [ x$RunFrontend = x1 ] -then - ser_daemon_add="frontend hal $ser_daemon_add" - ser_install=" $ser_install" - showX=true - else - ser_daemon_remove="frontend hal $ser_daemon_remove" - ser_remove="$ser_remove" - fi - -if [ x$UseMythWEB = x1 ] -then - ser_install="lighttpd mythweb$postfix $ser_install" - ser_daemon_add="lighttpd $ser_daemon_add" - else - ser_remove="mythweb$postfix $ser_remove" - ser_daemon_remove="$ser_daemon_remove" - fi - -#samba -if [ x$UseSamba = x1 ] -then - ser_install="samba $ser_install" - ser_daemon_add="nmbd smbd $ser_daemon_add " - if [ x$Samba_mediareadonly = x1 ] - then - smreadonly="no" - else - smreadonly="yes" - fi - - if [ x$Samba_homereadonly = x1 ] - then - shreadonly="no" - else - shreadonly="yes" - fi - - if [ ! -d ${BASE}/etc/samba ] - then - mkdir ${BASE}/etc/samba - fi - - if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ] - then - install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf - else - sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \ - -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf - - if [ x$Samba_media = "x1" ] - then - echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf - sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media - fi - - if [ x$Samba_home = "x1" ] - then - echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf - sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home - - fi - - fi -else - ser_remove="samba $ser_remove" - ser_install="smbclient $ser_install" - ser_daemon_remove="smbd nmbd $ser_daemon_remove" -fi - - -if [ x$UseNFS = x1 ] -then - ser_install="nfs-utils portmap $ser_install" - ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" - sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports - -else - ser_remove="$ser_remove" - ser_daemon_remove="nfsd nfslock $ser_daemon_remove" -fi - -if [ x$Runncidd = x1 ] -then - ser_daemon_add="ncidd ncid $ser_daemon_add" - ser_install="ncid $ser_install" - else - ser_daemon_remove="ncidd ncid $ser_daemon_remove" - ser_remove="ncid $ser_remove" - fi - -#Setting the default, just to avoid the or statement.. -if [ x$UseHobbit = x ] -then - UseHobbit=0 -fi - -if [ x$UseHobbit = x1 ] -then - case $SystemType in - Standalone|Master_backend ) - ser_daemon_add="hobbit $ser_daemon_add" - ser_install="hobbitserver $ser_install" - ;; - - *) ser_daemon_add="hobbit-client $ser_daemon_add" - ser_install="hobbit-client $ser_install" - ;; - esac -else - ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove" - ser_remove="hobbit-client hobbitserver $ser_remove" - rm -f /data/srv/httpd/htdocs/hobbit/index.html - - fi - - - -} - - - -function setupsleep { -if [ x$AutoShutdown = x1 ] -then - cronshutdowntime="" - if [ x$Shutdowntime != x-1 ] - then - cronshutdowntime=$Shutdowntime - fi - if [ x$Shutdowntime2 != x-1 ] - then - if [ x$cronshutdowntime = x ] - then - cronshutdowntime=$Shutdowntime2 - else - cronshutdowntime="${cronshutdowntime},${Shutdowntime2}" - fi - fi - - sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv -else - sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv -fi - -} - - -function setuppacman () { -#setup link to httpd dir -echo "Configuring pacman" - if [ ! x$1 = x ] - then - ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo - echo "creating the link for the pacman repo mirror" - fi - - for i in mv-core mv-core-testing mv-extra mv-extra-testing - do - echo "[$i]" > ${BASE}/etc/pacman.d/$i - #add mirror if needed - if [ x$PKG_MIRROR = x1 ] - then - echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i - fi - #add user templates - USERTEMPLATES="/data/home/mythtv/templates" - if [ -f $USERTEMPLATES/sources/$i ] - then - echo "Adding user $i" - cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i - fi - cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i - echo "setting local mirror to $dbhost for $i " - done - - #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg - - -} - - -function setupzipcode () { - if [ ! x$zipcode = x ] - then - ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode - fi -} - -function process_nfsmap () { -#first look for a local copy of nfsmap -if [ $1 = noip ] -then - if [ -f /data/home/mythtv/templates/nfsmap ] - then - NFSMAP="/data/home/mythtv/templates/nfsmap" - else - mv -f /tmp/nfsmap /tmp/nfsmap.old - wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap - if [ $? = 0 ] - then - NFSMAP="/tmp/nfsmap" - fi - fi -else - mv -f /tmp/nfsmap /tmp/nfsmap.old - wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap - if [ $? = 0 ] - then - NFSMAP="/tmp/nfsmap" - fi -fi - - if [ -f $NFSMAP ] - then - #read in file - while read line - do - NFSserver=`echo "$line"|cut -d" " -f1` - NFSmount=`echo "$line"|cut -d" " -f2` - setupfstab $NFSserver $NFSmount - done <$NFSMAP - else - echo "couldn't find nfsmap" - - fi -} - -function setupcnfs () { - scrubnfs - if [ $HaveCentralNFS = "yes" ] - then - case x$NFSserver in - xfile:nfsmap ) - process_nfsmap noip - ;; - *:nfsmap ) - nfsmapip=`echo "$NFSserver" | cut -d: -f1 ` - process_nfsmap $nfsmapip - ;; - *) setupfstab $NFSserver $NFSmount - esac - - #if [ ! x"$NFSserver" = "xfile:nfsmap" ] - #then - # setupfstab $NFSserver $NFSmount - #else - # process_nfsmap - #fi - else - echo "fe_nfs" - #if no central nfs found, then use the mbe. - if [ $SystemType = "Frontend_only" ] - then - setupfstab ${dbhost}:/data/media /data/media - fi - fi - -} - -function setupbootsplash () { - -if [ x$Usebootsplash = x1 ] -then - COMMAND="%s/^default.*0/default 1/g" -else - COMMAND="%s/^default.*1/default 0/g" -fi - -ex ${BASE}/boot/grub/menu.lst <<EOF -:$COMMAND -:wq -EOF - -} - -function setuphobbitclient () { -COMMAND="%s/^BBDISP=.*$/BBDISP=$dbhost/g" - - -ex ${BASE}/data/srv/hobbit/client/etc/hobbitclient.cfg <<EOF -:$COMMAND -:wq -EOF - -} - -function setupSyslog () { -COMMAND="%s/^destination d_remote.*$/destination d_remote \{tcp\(\"${dbhost}\" port\(514\)\) \;\} \;/" -ex ${BASE}/etc/syslog-ng.conf <<EOF -:$COMMAND -:wq -EOF - - - - -} - -function setupfuncminion () { -COMMAND="%s/^certmaster.*$/certmaster = ${dbhost}/" -ex ${BASE}/etc/func/minion.conf <<EOF -:$COMMAND -:wq -EOF -} - -function setupDNSMASQ(){ -if [ x$RunDHCP = x1 ] -then - echo "DNSMASQ setup" - -#set default route to my GW -COMMAND="%s/^dhcp-option=3.*$/dhcp-option=3,${route}/" -ex ${BASE}/etc/dnsmasq.conf <<EOF -:$COMMAND -:wq -EOF - -#setup dns to my ip -COMMAND="%s/^dhcp-option=6.*$/dhcp-option=6,${ip}/" -ex ${BASE}/etc/dnsmasq.conf <<EOF -:$COMMAND -:wq -EOF - - -#change nfsroot to my ip -COMMAND="%s/nfsroot=.*:/nfsroot=${ip}:/" -ex ${BASE}/data/srv/tftp/pxelinux.cfg/default <<EOF -:$COMMAND -:wq -EOF - -#add 127.0.0.1 to /etc/resolv.conf - echo "search lan" > ${BASE}/etc/resolv.conf - echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf - echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf -fi - -#setup dongle.config -COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /" -ex ${BASE}/data/srv/tftp/dongle.bin.config <<EOF -:$COMMAND -:wq -EOF - - - -#setup dongle.config - -} - -function reloadfe(){ - PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'` - /usr/bin/backend_control.sh clearcache behost $dbhost - if [ x$RESTART_LCD = xtrue ] - then - killall -9 mythlcdserver - fi - kill -s USR1 $PID - -} - - -function setup_db (){ - - install="mysql avahli" - daemon_add="mysql" - packages - daemons -status=1 -mysqlstatus=1 -while [ ! $status = 0 ] -do - sv stop mysql - sleep 1 - sv start mysql - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql -e "show databases;" - showstatus=$? - if [ $showstatus = 0 ] - then - pacman --noconfirm -R mythdb-initial - pacman --noconfirm -S mythdb-initial - $MV_ROOT/bin/restore_default_settings.sh -c load - if [ $SystemType = "Master_backend" ] - then - $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - fi - #update database to allow user jobs on this host. - $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW - $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - if [ -d /data/srv/mysql/mythconverg ] - then - pacman --noconfirm -R webcalendar - pacman --noconfirm --nodeps -S webcalendar - status=0 - fi - fi - fi -done -} - - -#----------------------------------------------------MAIN PROGRAM------------------------------------------- -#misc,sleep,hostype,advanced,audio -eval LAST=\$$# -LIST=`echo $LAST | tr , " " ` - -hosttypechange="false" - - -for i in $LIST - do - echo $i - case $i in - misc) showmisc="true" - ;; - sleep) showsleep="true" - ;; - hostype) showhost="true" - showX="true" - ;; - hostypec) hosttypechange="true" - ;; - advanced) showadvanced="true" - #showhost="true" - ;; - audio) showaudio="true" - ;; - network) shownetwork="true" - ;; - advancedX) showX="true" - ;; - restartfe) killall -9 mythfrontend - killall -9 mythwelcome - exit 0 - ;; - reloadfe) reloadfe - ;; - - this_is_install) MV_NEW_INSTALL="true" - ;; - - esac - done - -if [ x$MV_NEW_INSTALL = xtrue ] -then - hosttypechange="false" -fi - - - -# exit 1 - -#network -if [ x"$shownetwork" = xtrue ] -then - OLDHOSTNAME=`hostname` - NEWHOSTNAME=$hostname - if [ ! $OLDHOSTNAME = $NEWHOSTNAME ] - then - - ${MV_ROOT}/bin/restore_default_settings.sh -cuhostname -o -h$OLDHOSTNAME - RESTART_FE="true" - hostname $NEWHOSTNAME - if [ $SystemType != "Frontend_only" ] - then - sv restart mythbackend - fi - - fi - - setup_network - CMDLINE=$(cat /proc/cmdline) - echo $CMDLINE |grep -q netboot - NETBOOT=$? - if [ x$NETBOOT = x1 ] - then - echo "loading network" - ${BASE}/etc/net/scripts/network.init reload - else - echo "netboot, will not start network" - fi -fi - - -if [ x$showhost = "xtrue" ] -then -case $SystemType in - Standalone) - setupntp 1 - services - if [ x$hosttypechange = "xtrue" ] - then - setup_db - fi - if [ -f ${BASE}/etc/avahi/services/mysql.service ] - then - rm -f ${BASE}/etc/avahi/services/mysql.service - sudo sv restart avahi - fi - - install="mysql mythdb-initial avahli portmap $ser_install" - - - remove="none $ser_remove" - - daemon_add="mysql mythbackend avahi portmap $ser_daemon_add" - daemon_remove="none $ser_daemon_remove" - - ;; - Master_backend) - setupntp 1 - services - - if [ ! -f ${BASE}/etc/avahi/services/mysql.service ] - then - mkdir ${BASE}/etc/avahi/services - cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service - sudo sv restart avahi - fi - - install="mysql mythdb-initial avahi portmap myth2ipod mythtv-status $ser_install " - remove="$ser_remove" - - daemon_add="mysql mythbackend avahi portmap certmaster $ser_daemon_add" - daemon_remove="$ser_daemon_remove" - ;; - Slave_backend) - setupntp 0 - services - if [ x$hosttypechange = "xtrue" ] - then - setup_db - fi - if [ -f ${BASE}/etc/avahi/services/mysql.service ] - then - rm -f ${BASE}/etc/avahi/services/mysql.service - sudo sv restart avahi - fi - - #cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service - install="mysql avahi $ser_install " - remove=" $ser_remove" - - daemon_add="mythbackend avahi portmap $ser_daemon_add" - daemon_remove="$ser_daemon_remove" - ;; - Frontend_only) - #Add values for services - setupntp 0 - services - if [ -f ${BASE}/etc/avahi/services/mysql.service ] - then - rm -f ${BASE}/etc/avahi/services/mysql.service - sudo sv restart avahi - fi - - install="libmysqlclient mysql-clients portmap avahi $ser_install" - remove="mysql mythweb$postfix $ser_remove" - - daemon_add="avahi portmap $ser_daemon_add " - daemon_remove="mysql mythbackend $ser_daemon_remove" - ;; - - -esac -setupSyslog -setupfuncminion -fi - -#apply these to ALL types - - - - -#systemtype - -if [ x$showhost = "xtrue" ] -then - setupmysqlnetwork - setupmysql - setupremote - #grab the new dbhost key - #/usr/bin/grabkey.py -fi - -#audio - -if [ x$showaudio = "xtrue" ] -then - #setupsoundtype - if [ ! x$Audiotype = xtinker ] - then - ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice - fi -fi - -#should always run -packages - -#misc - -if [ x$showmisc = "xtrue" ] -then - setupzipcode - settimezone - setupcnfs -fi - -#sleep -if [ x$showsleep = "xtrue" ] -then - setupsleep -fi - -if [ x$showX = "xtrue" ] -then - ${MV_ROOT}/bin/xconfig.sh -fi - -#advanced -if [ x$showadvanced = "xtrue" ] -then - if [ ! x$showhost = "xtrue" ] - then - services - install="none $ser_install" - remove="none $ser_remove" - daemon_add=" none $ser_daemon_add" - daemon_remove="none $ser_daemon_remove" - packages - - - if [ x$SystemType = xMaster_backend ] - then - setuppacman link - else - setuppacman - fi - fi - setupncidclient - setupnciddaemon - setupbootsplash - setuphobbitclient - setupreceiver - setupevrouter - setupblaster - setupLCD - setupDNSMASQ - -fi - - - -daemons -#add check for lcd, and restart if needed. - -if [ x$RESTART_FE = xtrue ] -then - reloadfe -fi - - - - - -case $SystemType in - Standalone) smoltsystem=6 - MVRELEASE="$MVRELEASE (Standalone)" - ;; - Master_backend) - if [ x$RunFrontend = x1 ] - then - smoltsystem=2 - MVRELEASE="$MVRELEASE (MBE with Frontend)" - else - smoltsystem=1 - MVRELEASE="$MVRELEASE (MBE)" - fi - ;; - Slave_backend) - if [ x$RunFrontend = x1 ] - then - smoltsystem=5 - MVRELEASE="$MVRELEASE (SLAVE with Frontend)" - else - smoltsystem=5 - MVRELEASE="$MVRELEASE (SLAVE)" - fi - ;; - Frontend_only) - smoltsystem=3 - MVRELEASE="$MVRELEASE ( Frontend only)" - ;; -esac -echo $MVRELEASE > /etc/os_myth_release -echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info -echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info - diff --git a/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf deleted file mode 100644 index d49fbf6..0000000 --- a/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=shuttleVFD -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf b/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core/live-installer/templates/LCD/Silverstone/modules b/abs/core/live-installer/templates/LCD/Silverstone/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core/live-installer/templates/LCD/Silverstone/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf b/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf b/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf deleted file mode 100644 index ce64936..0000000 --- a/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf +++ /dev/null @@ -1,38 +0,0 @@ - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007 -# -# contributed by -# -# brand: /tmp/out -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name Antec_fusion_silver_v1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - post_data_bits 16 - post_data 0xFF - gap 131985 - min_repeat 6 - toggle_bit 0 - - - begin codes - CW 0x0001 - CCW 0x0100 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/lircrc b/abs/core/live-installer/templates/LCD/antec_fusion/lircrc deleted file mode 100644 index 7a39704..0000000 --- a/abs/core/live-installer/templates/LCD/antec_fusion/lircrc +++ /dev/null @@ -1,15 +0,0 @@ -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CW - repeat = 1 - config = ] -end - -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CCW - repeat = 1 - config = [ -end diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/modules b/abs/core/live-installer/templates/LCD/antec_fusion/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core/live-installer/templates/LCD/antec_fusion/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core/live-installer/templates/LCD/xosd/LCDd.conf b/abs/core/live-installer/templates/LCD/xosd/LCDd.conf deleted file mode 100644 index 5b37bd7..0000000 --- a/abs/core/live-installer/templates/LCD/xosd/LCDd.conf +++ /dev/null @@ -1,957 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d <driver> command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, -# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, -# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS, -# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=xosd - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# GoodBye message: each entry represents a display line; default: builtin -#GoodBye="Thanks for using" -#GoodBye=" LCDproc!" - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## -[ea65] - -# Device is fixed /dev/ttyS1 -# Width and Height are fixed 9x1 - -# As the VFD is self luminescent we don't have a backlight -# But we can use the backlight functions to control the front LEDs -# Brightness 0 to 299 -> LEDs off -# Brightness 300 to 699 -> LEDs half bright -# Brightness 700 to 1000 -> LEDs full bright -Brightness=500 -# OffBrightness is the the value used for the 'backlight off' state -OffBrightness=0 - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# Some displays (e.g. vdr-wakeup) need a message from the driver to that it -# is still alive. When set to a value bigger then null the character in the -# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0. -#KeepAliveDisplay=0 - -# If you experience occasional garbage on your display you can use this -# option as workaround. If set to a value bigger than null it forces a -# full screen refresh <RefreshDiplay> seconds. Default: 0. -#RefreshDisplay=5 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=480 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# The following table translates from MtxOrb key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Mini-box.com picoLCD (usblcd) driver ## -[picolcd] -# This is for the Mini-Box.com usblcd device that ships with the M300. It can -# also be purchased separately but this driver has only been tested on the M300 -# setup. - -# KeyTimeout is the time that LCDd spends waiting for a key press before cycling -# through other duties. Higher values make LCDd use less CPU time and make -# key presses more detectable. Lower values make LCDd more responsive but a -# little prone to missing key presses. 500 (.5 second) is the default and a -# balanced value. -KeyTimeout=500 - -# Contrast: [default: 1000; legal: 0 - 1000] -Contrast=1000 - -# Light the keys? i[default: on; legal: on, off] -Keylights=on - -# If Keylights is on, the you can unlight specific keys below: -# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. -# There is no LED for the +/- keys. This is a handy way to indicate to users -# which keys are disabled. [default: on; legal: on, off] -Key0Light=on -Key1Light=on -Key2Light=on -Key3Light=on -Key4Light=on -Key5Light=on - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) -# Note: Currently only tested with G321D & SP14Q002. -Type=G321D - -# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] -CellSize=6x10 - -# Select what type of connection [legal: classic, bitshaker; default: classic] -ConnectionType=classic - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## serial POS display driver ## -[serialPOS] - -# Device to use in serial modea [default: /dev/lcd] -Device=/dev/lcd - -# Specifies the size of the display in characters. [default: 16x2] -Size=16x2 - -# Set the communication protocol to use with the POS display. -# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] -Type=AEDEX - -# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200] -Speed=9600 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use, in XLFD format, as given by "xfontsel" -Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-* - - -# EOF diff --git a/abs/core/live-installer/templates/cc.orig.sh b/abs/core/live-installer/templates/cc.orig.sh deleted file mode 100755 index d8fd2dc..0000000 --- a/abs/core/live-installer/templates/cc.orig.sh +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/perl -# rwraithr added segment for 4 digit channels -# make sure to set this string to -# the corresponding remote in /etc/remoted.conf -#$remote_name = "RC-u43c-1h"; -$remote_name = "$REMOTE_NAME"; - -sub change_channel { - my($channel_digit) = @_; - system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit"); - sleep .5; -} - -$channel=$ARGV[0]; -sleep 1; -if (length($channel) > 3) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); - change_channel(substr($channel,3,1)); -} elsif (length($channel) > 2) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); -} elsif (length($channel) > 1) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); -} else { - change_channel(substr($channel,0,1)); -} -system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT"); - -#system ("sleep 2"); -#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2"); -#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2"); diff --git a/abs/core/live-installer/templates/cc.sh b/abs/core/live-installer/templates/cc.sh deleted file mode 100755 index 0cce308..0000000 --- a/abs/core/live-installer/templates/cc.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -/usr/local/bin/cc.orig.sh $@ & -/usr/local/bin/cc_vol.sh & - - diff --git a/abs/core/live-installer/templates/cc_vol.sh b/abs/core/live-installer/templates/cc_vol.sh deleted file mode 100755 index 819008d..0000000 --- a/abs/core/live-installer/templates/cc_vol.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -sleep 2 -/usr/local/bin/ivtvctl -p 2 -d /dev/video2 -/usr/local/bin/ivtvctl -p 1 -d /dev/video2 - diff --git a/abs/core/live-installer/templates/change_chan.sh b/abs/core/live-installer/templates/change_chan.sh deleted file mode 100755 index 5ad8765..0000000 --- a/abs/core/live-installer/templates/change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac -# /usr/bin/fix_audio.sh & diff --git a/abs/core/live-installer/templates/cron.template b/abs/core/live-installer/templates/cron.template deleted file mode 100644 index 3fcea10..0000000 --- a/abs/core/live-installer/templates/cron.template +++ /dev/null @@ -1,4 +0,0 @@ -# <minute> <hour> <day> <month> <dow> <command> - - -00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file diff --git a/abs/core/live-installer/templates/etcnet/eth/ipv4address b/abs/core/live-installer/templates/etcnet/eth/ipv4address deleted file mode 100644 index 1df28d2..0000000 --- a/abs/core/live-installer/templates/etcnet/eth/ipv4address +++ /dev/null @@ -1,2 +0,0 @@ -192.168.1.158/24 - diff --git a/abs/core/live-installer/templates/etcnet/eth/ipv4route b/abs/core/live-installer/templates/etcnet/eth/ipv4route deleted file mode 100644 index 373a4d1..0000000 --- a/abs/core/live-installer/templates/etcnet/eth/ipv4route +++ /dev/null @@ -1,2 +0,0 @@ -default via 192.168.1.1 - diff --git a/abs/core/live-installer/templates/etcnet/eth/iwconfig b/abs/core/live-installer/templates/etcnet/eth/iwconfig deleted file mode 100644 index b1f14e0..0000000 --- a/abs/core/live-installer/templates/etcnet/eth/iwconfig +++ /dev/null @@ -1,2 +0,0 @@ -essid home_lan -#key ababababab diff --git a/abs/core/live-installer/templates/etcnet/eth/options b/abs/core/live-installer/templates/etcnet/eth/options deleted file mode 100644 index 929da58..0000000 --- a/abs/core/live-installer/templates/etcnet/eth/options +++ /dev/null @@ -1,7 +0,0 @@ -# If you want to change current interface name, edit /etc/net/iftab, -# rename current directory and uncomment this line: -TYPE=eth -DISABLED=no -BOOTPROTO=dhcp -ONBOOT=yes -CONFIG_WIRELESS=no diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-4 b/abs/core/live-installer/templates/evrouter/MythVantage-4 deleted file mode 100644 index e69de29..0000000 --- a/abs/core/live-installer/templates/evrouter/MythVantage-4 +++ /dev/null diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-8 b/abs/core/live-installer/templates/evrouter/MythVantage-8 deleted file mode 100644 index e69de29..0000000 --- a/abs/core/live-installer/templates/evrouter/MythVantage-8 +++ /dev/null diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-Full b/abs/core/live-installer/templates/evrouter/MythVantage-Full deleted file mode 100644 index e69de29..0000000 --- a/abs/core/live-installer/templates/evrouter/MythVantage-Full +++ /dev/null diff --git a/abs/core/live-installer/templates/evrouter/MythVantage8-minipac b/abs/core/live-installer/templates/evrouter/MythVantage8-minipac deleted file mode 100644 index 0e3a708..0000000 --- a/abs/core/live-installer/templates/evrouter/MythVantage8-minipac +++ /dev/null @@ -1,3 +0,0 @@ -"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" -"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject" - diff --git a/abs/core/live-installer/templates/evrouter/MythVantage8-uhid b/abs/core/live-installer/templates/evrouter/MythVantage8-uhid deleted file mode 100644 index 7cb2e34..0000000 --- a/abs/core/live-installer/templates/evrouter/MythVantage8-uhid +++ /dev/null @@ -1,3 +0,0 @@ -"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" -"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject" - diff --git a/abs/core/live-installer/templates/exports.template b/abs/core/live-installer/templates/exports.template deleted file mode 100644 index b946287..0000000 --- a/abs/core/live-installer/templates/exports.template +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/exports -# -# See exports(5) for a description. - -# use exportfs -arv to reread -/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) -/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) - diff --git a/abs/core/live-installer/templates/fstab.conf.template b/abs/core/live-installer/templates/fstab.conf.template deleted file mode 100755 index d27bcd9..0000000 --- a/abs/core/live-installer/templates/fstab.conf.template +++ /dev/null @@ -1,16 +0,0 @@ -# -# /etc/fstab: static file system information -# -# <file system> <dir> <type> <options> <dump> <pass> -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 - -/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 -/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 -/dev/fd0 /mnt/fl vfat user,noauto 0 0 - -/dev/sda1 / reiserfs defaults 0 1 -/dev/sda2 swap swap defaults 0 0 -/dev/sda3 /data reiserfs defaults 0 0 -192.168.1.6:/media /data/media nfs - diff --git a/abs/core/live-installer/templates/mysql.service b/abs/core/live-installer/templates/mysql.service deleted file mode 100644 index 160450e..0000000 --- a/abs/core/live-installer/templates/mysql.service +++ /dev/null @@ -1,13 +0,0 @@ -<?xml version="1.0" standalone='no'?><!--*-nxml-*--> -<!DOCTYPE service-group SYSTEM "avahi-service.dtd"> - -<service-group> - - <name replace-wildcards="yes">mysql_myth on %h</name> - - <service> - <type>_mysql._tcp</type> - <port>3306</port> - </service> - -</service-group> diff --git a/abs/core/live-installer/templates/mysql.txt b/abs/core/live-installer/templates/mysql.txt deleted file mode 100755 index 04531b5..0000000 --- a/abs/core/live-installer/templates/mysql.txt +++ /dev/null @@ -1,29 +0,0 @@ -DBHostName=127.0.0.1 -DBUserName=mythtv -DBPassword=mythtv -DBName=mythconverg -DBType=QMYSQL3 - -# Set the following if you want to use something other than the -# machine's real hostname for identifying settings in the database. -# This is useful if your hostname changes often, as otherwise -# you'll need to reconfigure mythtv (or futz with the DB) every time. -# TWO HOSTS MUST NOT USE THE SAME VALUE -# -#LocalHostName=my-unique-identifier-goes-here - -# If you want your frontend to be able to wake your MySQL server -# using WakeOnLan, have a look at the following settings: -# -# Set the time the frontend waits (in seconds) between reconnect tries. -# This should be the rough time your MySQL server needs for startup -#WOLsqlReconnectWaitTime=0 -# -# -# This is the amount of retries to wake the MySQL server until the frontend -# gives up -#WOLsqlConnectRetry=5 -# -# -# This is the command executed to wake your MySQL server. -#WOLsqlCommand=echo 'WOLsqlServerCommand not set' diff --git a/abs/core/live-installer/templates/ncid.conf.template b/abs/core/live-installer/templates/ncid.conf.template deleted file mode 100755 index 43ef490..0000000 --- a/abs/core/live-installer/templates/ncid.conf.template +++ /dev/null @@ -1,51 +0,0 @@ -# tcl/tk configuration file - -# Directory NCID uses to find the helper scripts -set ProgDir /usr/share/ncid - -# default helper script -set EXTPROG ncid-osd - -# Set Host to the NCID server address -# Host defaults to 127.0.0.1 -#set Host 127.0.0.1 -set Host 192.168.1.5 - -# The NCID port default is 3333 -set Port 3333 - -# If the connection to the server is lost, -# try every Delay seconds to reconnect -# The Default: 60 -set Delay 20 - -# If set to 1, display raw data received from the NCID server -# If set to 0, do not display raw data received from the NCID server -# Default: 0 -set Raw 0 - -# If set to 1, output: date time number name -# If set to 0, output: name number -# Default: 0 -set All 1 - -# If set to 1, display formatted CID, and CID log file on connect -# If set to 0, ddo not isplay formatted CID, and CID log file on connect -# Default: 0 -set Verbose 0 - -# If set to 1, display information in terminal progran or external program -# If set to 0, display information using a GUI -# Default: 0 -set NoGUI 1 - -# output name and number to external program -# Default: 0 -set Callprog 1 - -# ring number to call external program -# Default: 0 -set CallOnRing 0 - -# external called program -set Program [list $ProgDir/$EXTPROG] diff --git a/abs/core/live-installer/templates/ncidd.conf.template b/abs/core/live-installer/templates/ncidd.conf.template deleted file mode 100644 index daa2e79..0000000 --- a/abs/core/live-installer/templates/ncidd.conf.template +++ /dev/null @@ -1,143 +0,0 @@ -# ncid - Network CallerID Server Config File - -################################ -# Definitions and Line formats # -################################ - -# lines can be blank, or start with the words: send, set # -# -# A line is divided into words, separated by spaces -# -# A word is either a string of non-blank characters, everything -# between double quotes, or an equal sign. -# -# SEND LINE FORMAT: -# send DATATYPE [DATATYPE] ... -# where DATATYPE = cidlog, cidinfo -# -# SET LINE FORMAT: -# set ITEM = VALUE [ITEM = VALUE] ... -# where ITEM = cidalias, cidlog, datalog, initcid, initstr, -# lockfile, port, ttyclocal, ttyport, ttyspeed, -# nomodem - -############################ -# Log and Info for Clients # -############################ - -# Send the call log to a client when connected -# The default is not to send the call log file -send cidlog - -# Send call info (LINE and RING) to a client at each ring -# The default is not to send the call info line -send cidinfo - -############################ -# NCID Communications Port # -############################ - -# The default TCP/IP port is 3333 - set port = 3333 - -####################### -# Alias and Log Files # -####################### - -# The default CID alias file: /etc/ncid/ncidd.alias -# set cidalias = /etc/ncid/ncidd.alias - -# The default CID call log file: /var/log/cidcall.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set cidlog = /var/log/cidcall.log - -# The default tty data log file: /var/log/ciddata.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set datalog = /var/log/ciddata.log - -##################### -# TTY Configuration # -##################### - -# The default tty port: /dev/modem -# set ttyport = /dev/cu.modem # Macintosh OS X - set ttyport = /dev/ttyS1 - -# The default tty port speed: 19200 -# The tty speed can be one of: 38400, 19200, 9600, 4800 -# set ttyspeed = 4800 # NetCallerID port speed - -# Ignore tty control signals for internal modems and 3 wire serial cables -# Disable tty control signals: ttyclocal = 1 -# Enable tty control signals: ttyclocal = 0 (default) -# set ttyclocal = 1 - -# The lockfile name is generated automatically -# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem -# set lockfile = /var/lock/LCK..ttyS0 - -##################### -# Modem or No Modem # -##################### - -# Obtain CallerID from a CID device or a modem -# device: nomodem = 1 (do not send AT commands) -# modem: nomodem = 0 (default - send AT commands) -# set nomodem = 1 - -######################## -# Modem Initialization # -######################## - -# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" -# set initstr = "ATE1V1Q0" -# -# Alternate modem initialization string -# set initstr = "AT&FE1V1Q0+VIP" - -# Addon strings to set modem for Distinctive Ring: -# http://www.modemsite.com/56k/dring.asp -# -# 3Com/USR/TI chipset: ATS41=1 -# Reported Ring Codes: RING A, RING B, RING C -# Rockwell/Conexant chipset: AT-SDR=7 -# Reported Ring Codes: RING 1, RING 2, RING 3 -# Lucent/Agere chipset: AT+VDR=1,0 -# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 -# -# Example adds 3Com DR to the default modem initialization -# set initstr = "ATE1V1Q0S41=1" - -# The default for ncidd is to try two CID strings to setup -# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". -# set initcid = "AT#CID=1" -# -# Alternate CID strings to try if default does not work: -# set initcid = "AT+FCLASS=8;+VCID=1" -# set initcid = "AT-STE=1;+VCID=1" -# set initcid = "AT-STE=1;#CID=1" - -################# -# TiVo Settings # -################# -# set ttyclocal = 1 # TiVo requires CLOCAL -# set ttyport = /dev/ttyS1 # TiVo Modem Port -# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port -# -# To use a modem on the TiVo serial port -# Tivo (stereo mini jack) -> -# -> (stereo mini plug) TiVo serial cable (9-pin male) -> -# -> (9-pin Female) PC modem cable (25-pin Male -> -# -> (25-pin Female) Modem -# if the modem has switches, disable DTR -# Use this string to set the modem before attaching it to the TiVo: -# AT&F0&D0&B1&W -# -# set ttyport = /dev/ttyS3 # TiVo Serial Port -# -# End TiVo Settings - diff --git a/abs/core/live-installer/templates/real_change_chan.sh b/abs/core/live-installer/templates/real_change_chan.sh deleted file mode 100755 index efeba88..0000000 --- a/abs/core/live-installer/templates/real_change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac - /usr/bin/fix_audio.sh & diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf deleted file mode 100644 index e7c1539..0000000 --- a/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf +++ /dev/null @@ -1,357 +0,0 @@ - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004 -# -# contributed by -# -# brand: ATI Remote Wonder -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name wonder - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 147987 - toggle_bit 0 - - - begin codes - A 0x0000000014C500F0 - B 0x0000000014C601F0 - POWER 0x0000000014C702F0 - TV 0x0000000014C803F0 - DVD 0x0000000014C904F0 - WEB 0x0000000014CA05F0 - GUIDE 0x0000000014CB06F0 - GRAB 0x0000000014CC07F0 - VOL_DOWN 0x0000000014CE09F0 - VOL_UP 0x0000000014CD08F0 - MUTE 0x0000000014CF0AF0 - CH_DOWN 0x0000000014D10CF0 - CH_UP 0x0000000014D00BF0 - A 0x0000000014C500F0 - B 0x0000000014C601F0 - 1 0x0000000014D20DF0 - 2 0x0000000014D30EF0 - 3 0x0000000014D40FF0 - 4 0x0000000014D510F0 - 5 0x0000000014D611F0 - 6 0x0000000014D712F0 - 7 0x0000000014D813F0 - 8 0x0000000014D914F0 - 9 0x0000000014DA15F0 - 0 0x0000000014DC17F0 - MENU 0x0000000014DB16F0 - CHECK 0x0000000014DD18F0 - C 0x0000000014DE19F0 - D 0x0000000014E01BF0 - UP 0x0000000014DF1AF0 - LEFT 0x0000000014E21DF0 - DOWN 0x0000000014E722F0 - RIGHT 0x0000000014E41FF0 - OK 0x0000000014E31EF0 - REPLAY 0x0000000014E11CF0 - FULLSCREEN 0x0000000014E520F0 - E 0x0000000014E621F0 - F 0x0000000014E823F0 - REWIND 0x0000000014E924F0 - FORWARD 0x0000000014EB26F0 - PLAY 0x0000000014EA25F0 - RECORD 0x0000000014EC27F0 - STOP 0x0000000014ED28F0 - PAUSE 0x0000000014EE29F0 - end codes - -end remote - - - -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 -# -# contributed by Steffen -# -# brand: ATI Sapphire Remote Bob II USB -# model no. of remote control: 5000024400 -# devices being controlled by this remote: MythTV -# - -begin remote - -name wonder II -bits 16 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -pre_data_bits 8 -pre_data 0x0 -post_data_bits 16 -post_data 0x0 -gap 299851 -toggle_bit 0 - - -begin codes -aux1 0x023F -aux2 0x023F -aux3 0x023F -aux4 0x023F -mouse_left_btn 0x02A9 -mouse_right_btn 0x02AA -a 0x0278 -b 0x0279 -power 0x020C -dvd 0x0238 -tv 0x0239 -help 0x02BE -pc 0x023F -resize 0x02D5 -hand 0x02D0 -ati 0x028E -vol_up 0x0210 -vol_down 0x0211 -mute 0x020D -ch_up 0x0220 -ch_down 0x0221 -mouse_up 0x013F -mouse_down 0x013F -mouse_left 0x013F -mouse_right 0x013F -1 0x0201 -2 0x0202 -3 0x0203 -4 0x0204 -5 0x0205 -6 0x0206 -7 0x0207 -8 0x0208 -9 0x0209 -0 0x0200 -list 0x0254 -check 0x0282 -info 0x02F9 -timer 0x0296 -arrow_up 0x0258 -arrow_left 0x025A -arrow_right 0x025B -arrow_down 0x0259 -ok 0x025C -c 0x017A -d 0x027B -play 0x022C -e 0x027C -f 0x027D -rewind 0x0229 -rec 0x0237 -stop 0x0231 -pause 0x0230 -ffwd 0x0228 -end codes - -end remote - - -# Please make this file available to others -# by sending it to <lirc at bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004 -# -# contributed by gLaNDix -# -# brand: ATI -# model no. of remote control: 5000023600 -# devices being controlled by this remote: MythTV 0.14 -# -# USB ID: 0bc7:0004 -# - -begin remote - - name REMOTE_WONDER - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227933 - toggle_bit 0 - - - begin codes - A 0x000000000000D500 - B 0x000000000000D601 - C 0x000000000000EE19 - D 0x000000000000F01B - E 0x000000000000F621 - F 0x000000000000F823 - POWER 0x000000000000D702 - TV 0x000000000000D803 - DVD 0x000000000000D904 - WEB 0x000000000000DA05 - BOOK 0x000000000000DB06 - HAND 0x000000000000DC07 - MOUSE_LEFT_BTN 0x0000000000004D78 - MOUSE_LEFTBUTTONUP 0x0000000000004E79 - MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79 - MOUSE_RIGHT_BTN 0x000000000000517C - MOUSE_RIGHTBUTTONUP 0x000000000000527D - MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E - MOUSE_LEFT 0x0000000000004570 - MOUSE_RIGHT 0x0000000000004671 - MOUSE_UP 0x0000000000004772 - MOUSE_DOWN 0x0000000000004873 - MOUSE_UPRIGHT 0x0000000000004A75 - MOUSE_DOWNRIGHT 0x0000000000004B76 - MOUSE_DOWNLEFT 0x0000000000004C77 - MOUSE_UPLEFT 0x0000000000004974 - VOL_UP 0x000000000000DD08 - VOL_DOWN 0x000000000000DE09 - MUTE 0x000000000000DF0A - CH_DOWN 0x000000000000E10C - CH_UP 0x000000000000E00B - 1 0x000000000000E20D - 2 0x000000000000E30E - 3 0x000000000000E40F - 4 0x000000000000E510 - 5 0x000000000000E611 - 6 0x000000000000E712 - 7 0x000000000000E813 - 8 0x000000000000E914 - 9 0x000000000000EA15 - 0 0x000000000000EC17 - DVD_ROOTMENU 0x000000000000EB16 - SETUP 0x000000000000ED18 - ARROW_UP 0x000000000000EF1A - ARROW_RIGHT 0x000000000000F41F - ARROW_DOWN 0x000000000000F722 - ARROW_LEFT 0x000000000000F21D - OK 0x000000000000F31E - MAXAMIZE 0x000000000000F520 - TV_ON_DEMAND 0x000000000000F11C - BACK 0x000000000000F924 - PLAY 0x000000000000FA25 - NEXT 0x000000000000FB26 - RECORD 0x000000000000FC27 - STOP 0x000000000000FD28 - PAUSE 0x000000000000FE29 - end codes - -end remote - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 -# -# contributed by Jason Piterak -# -# brand: ati -# This uses the atiusb driver -#=20 -# model no. of remote control: 5000022000 -# -# devices being controlled by this remote: -# MythTV PVR using knopmyth by Cecil and Dale at -# http://mysettopbox.tv -# Key map names are as per ATI's website: -#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html -# Feel free to change them as you see fit :-) -# -# NOTE: There are 16 channels for this remote; this file only -# supports one channel. See the GATOS project for information -# on how to change the channel. Not tested. Unknown channel. -# - -begin remote - - name atiusb - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0xF000 - gap 139891 - toggle_bit 0 - - - begin codes - a 0x000000000000C500 - b 0x000000000000C601 - power 0x000000000000C702 - tv 0x000000000000C803 - dvd 0x000000000000C904 - web 0x000000000000CA05 - media_library 0x000000000000CB06 - drag 0x000000000000CC07 - mouse-button_left 0x0000000000003D78 - mouse-button_right 0x000000000000417C - mouse-up 0x0000000000003772 - mouse-down 0x0000000000003873 - mouse-left 0x0000000000003570 - mouse-right 0x0000000000003671 - mouse-left_up 0x0000000000003974 - mouse-right_up 0x0000000000003A75 - mouse-left_down 0x0000000000003C77 - mouse-right_down 0x0000000000003B76 - vol-up 0x000000000000CD08 - vol-down 0x000000000000CE09 - mute 0x000000000000CF0A - chan-up 0x000000000000D00B - chan-down 0x000000000000D10C - 1 0x000000000000D20D - 2 0x000000000000D30E - 3 0x000000000000D40F - 4 0x000000000000D510 - 5 0x000000000000D611 - 6 0x000000000000D712 - 7 0x000000000000D813 - 8 0x000000000000D914 - 9 0x000000000000DA15 - 0 0x000000000000DC17 - dvd-root_menu 0x000000000000DB16 - launch_setup 0x000000000000DD18 - c 0x000000000000DE19 - d 0x000000000000E01B - tv_on_demand 0x000000000000E11C - max_window 0x000000000000E520 - cursor-up 0x000000000000DF1A - cursor-down 0x000000000000E722 - cursor-left 0x000000000000E21D - cursor-right 0x000000000000E41F - ok 0x000000000000E31E - e 0x000000000000E621 - f 0x000000000000E823 - rewind 0x000000000000E924 - play 0x000000000000EA25 - fast_forward 0x000000000000EB26 - record 0x000000000000EC27 - stop 0x000000000000ED28 - pause 0x000000000000EE29 - end codes - -end remote diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt deleted file mode 100644 index 80eec07..0000000 --- a/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt +++ /dev/null @@ -1,922 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the ATI-Wonder Remote -# using lirc_atiusb driver -# - -begin -prog = mythtv -button = a -config = E -repeat = 5 -end - -begin -prog = mythtv -button = A -config = E -repeat = 5 -end - -begin -prog = mythtv -button = b -config = O -repeat = 5 -end - -begin -prog = mythtv -button = B -config = O -repeat = 5 -end - -begin -prog = mythtv -button = B -config = O -repeat = 5 -end - -begin -prog = mythtv -button = stop -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = ffwd -config = Right -repeat = 5 -end - -begin -prog = mythtv -button = FORWARD -config = Right -repeat = 5 -end - -begin -prog = mythtv -button = rewind -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = REWIND -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = pause -config = P -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = P -repeat = 5 -end - -begin -prog = mythtv -button = play -config = P -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = P -repeat = 5 -end - -begin -prog = mythtv -button = mute -config = | -repeat = 5 -end - -begin -prog = mythtv -button = MUTE -config = | -repeat = 5 -end - -begin -prog = mythtv -button = vol_down -config = F10 -repeat = 5 -end - -begin -prog = mythtv -button = VOL_DOWN -config = F10 -repeat = 5 -end - -begin -prog = mythtv -button = vol_up -config = F11 -repeat = 5 -end - -begin -prog = mythtv -button = VOL_UP -config = F11 -repeat = 5 -end - -begin -prog = mythtv -button = f -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = F -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = e -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = E -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = ch_up -config = Up -repeat = 5 -end - -begin -prog = mythtv -button = CH_UP -config = Up -repeat = 5 -end - -begin -prog = mythtv -button = ch_down -config = Down -repeat = 5 -end - -begin -prog = mythtv -button = CH_DOWN -config = Down -repeat = 5 -end - -begin -prog = mythtv -button = ok -config = Enter -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Enter -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = rec -config = R -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = R -repeat = 5 -end - - -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the ATI-Wonder Remote -# using lirc_atiusb driver -# - -begin -#Jumppoint for Program Guide created in Mythweb - prog = mythtv - button = TV - config = ! -end - -begin -#Jumppoint for DVD playback created in Mythweb - prog = mythtv - button = DVD - config = @ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = WEB - config = # -end - -begin - prog = mythtv -#Jumppoint for MythVideo created in Mythweb - button = BOOK - config = $ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = HAND - config = % -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin - prog = mythtv - button = MOUSE_UP - config = Up -end - -begin - prog = mythtv - button = MOUSE_DOWN - config = Down -end - -begin - prog = mythtv - button = MOUSE_LEFT - config = Left -end - -begin - prog = mythtv - button = MOUSE_RIGHT - config = Right -end - -begin - prog = mythtv - button = MOUSE_RIGHT_BTN - config = Esc -end - -begin - prog = mythtv -# Enter button - button = MOUSE_LEFT_BTN - config = Return -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -begin - prog = mythtv -# Enter button - button = OK - config = Return -end - -begin - prog = mythtv - button = ARROW_UP - config = Up -end - -begin - prog = mythtv - button = ARROW_DOWN - config = Down -end - -begin - prog = mythtv - button = ARROW_LEFT - config = Left -end - -begin - prog = mythtv - button = ARROW_RIGHT - config = Right -end - -begin - prog = mythtv - button = D - config = Esc -end - -begin -prog = mythtv -button = CH_UP -config = Up -end - -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = F10 -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = F11 -end - -begin - prog = mythtv - button = MUTE - config = | -end - -begin - prog = mythtv - button = DVD_ROOTMENU - config = M -end - -begin - prog = mythtv -# Enter button - button = SETUP - config = Return -end - - -begin - prog = mythtv - button = A - config = S -end - -begin - prog = mythtv - button = B - config = I -end - -begin - prog = mythtv - button = C - config = T -end - -begin -prog = mythtv -# Change focus for PiP (to change channel in the other window) -button = MAXAMIZE -config = B -end - -begin -prog = mythtv -# Toggle PiP on/off -button = TV_ON_DEMAND -config = V -end - -begin - prog = mythtv - button = BACK - config = < -end - -begin - prog = mythtv - button = NEXT - config = > -end - -begin - prog = mythtv - button = BACK - config = Left -end - - -begin - prog = mythtv - button = NEXT - config = Right -end - -begin -prog = mythtv -button = RECORD -config = R -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = P -end - -begin -prog = mythtv -button = PAUSE -config = P -end - -#Page Up/Down -begin -prog = mythtv -button = E -config = PgUp -end - -begin -prog = mythtv -button = F -config = PgDown -end - -begin -prog = mythtv -button = E -# Use for backwards commercial skip -config = Q -end - -begin -prog = mythtv -button = F -# Use for forward commercial skip -config = Z -end - -#Mplayer - -begin -prog = mplayer -button = PLAY -config = pause -end - -begin -prog = mplayer -button = PAUSE -config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = D -config = quit -end - -begin -prog = mplayer -button = MOUSE_RIGHT_BTN -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = E -repeat = 6 -config = seek -10 -end - -begin -prog = mplayer -button = F -repeat = 6 -config = seek 10 -end - -begin -prog = mplayer -button = BACK -repeat = 6 -config = seek -70 -end - -begin -prog = mplayer -button = NEXT -repeat = 6 -config = seek 70 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 6 -config = volume -1 -end - -begin -prog = mplayer -button = VOL_UP -repeat = 6 -config = volume 1 -end - -#Xine - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = PAUSE -config = PAUSE -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = POWER -config = Quit -end - -begin -prog = xine -button = D -config = quit -end - -begin -prog = xine -button = MOUSE_RIGHT_BTN -config = quit -end - -begin -prog = xine -button = ARROW_UP -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = ARROW_DOWN -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = ARROW_LEFT -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = ARROW_RIGHT -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = MOUSE_UP -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = MOUSE_DOWN -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = MOUSE_LEFT -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = MOUSE_RIGHT -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = MOUSE_LEFT_BTN -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = DVD_ROOTMENU -repeat = 0 -config = Menu -end - -#vol down -begin -prog = xine -button = VOL_DOWN -repeat = 1 -config = Volume- -end - -#vol up -begin -prog = xine -button = VOL_UP -repeat = 1 -config = Volume+ -end - -begin -prog = xine -button = TV_ON_DEMAND -repeat = 1 -config = ZoomIn -end - -begin -prog = xine -button = MAXAMIZE -repeat = 1 -config = ZoomOut -end - -#skip chapter forward -begin -prog = xine -button = NEXT -repeat = 1 -config = EventNext -end - -#skip chapter backward -begin -prog = xine -button = BACK -repeat = 1 -config = EventPrior -end - -begin -prog = xine -button = F -repeat = 2 -config = SeekRelative+45 -end - -begin -prog = xine -button = E -repeat = 2 -config = SeekRelative-45 -end - diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg b/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg Binary files differdeleted file mode 100644 index 351a111..0000000 --- a/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS deleted file mode 100644 index b76d32c..0000000 --- a/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc b/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc deleted file mode 100644 index 5e668b5..0000000 --- a/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg b/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg Binary files differdeleted file mode 100644 index 38857f9..0000000 --- a/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf b/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf deleted file mode 100644 index b76d32c..0000000 --- a/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc b/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc deleted file mode 100755 index 2663c63..0000000 --- a/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc +++ /dev/null @@ -1,857 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 5 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -repeat = 5 -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Return -repeat = 5 -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -repeat = 5 -end - -begin -prog = mythtv -button = EXIT -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = Space -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = p -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -repeat = 5 -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = r -repeat = 5 -end - -begin -prog = mythtv -# rewind -button = << -config = Home -repeat = 5 -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -repeat = 5 -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = S -repeat = 5 -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg b/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg Binary files differdeleted file mode 100644 index e2af610..0000000 --- a/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf deleted file mode 100644 index f8175f3..0000000 --- a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf +++ /dev/null @@ -1,87 +0,0 @@ -# this config file was generated -# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 -# -# contributed by Jarod Wilson <jcw@wilsonet.com> -#------------------------------------------------------------------------------ -# -# filename: RadioShack_15-2116-vcr0081.lirc -# encoding: RC-5 -# brand: RadioShack Universal (and others) -# model: 15-2116, set as VCR type 0081 -# supported devices: all -# -# note: requires quite a bit of key reassignment w/keymover and EFCs... -# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO -# -#------------------------------------------------------------------------------ - -begin remote - - name rs15-2116-vcr0081 - bits 11 - flags RC5|CONST_LENGTH - eps 20 - aeps 0 - header 0 0 - one 889 889 - zero 889 889 - plead 889 - ptrail 0 - foot 0 0 - repeat 0 0 - pre_data_bits 2 - pre_data 0x02 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 113792 - toggle_bit 2 - frequency 36000 - duty_cycle 50 - - begin codes - 0 0x0000000000000140 - 1 0x0000000000000141 - 2 0x0000000000000142 - 3 0x0000000000000143 - 4 0x0000000000000144 - 5 0x0000000000000145 - 6 0x0000000000000146 - 7 0x0000000000000147 - 8 0x0000000000000148 - 9 0x0000000000000149 - INFO 0x000000000000014a - SELECT 0x000000000000014b - POWER 0x000000000000014c - MUTE 0x000000000000014d - MOVE 0x000000000000014e - VOL+ 0x0000000000000150 - VOL- 0x0000000000000151 - RIGHT 0x000000000000015a - LEFT 0x000000000000015b - ENTER 0x000000000000015c - MENU 0x000000000000015d - CH+ 0x0000000000000160 - CH- 0x0000000000000161 - PIP 0x0000000000000162 - SWAP 0x0000000000000163 - SLEEP 0x0000000000000166 - FREEZE 0x0000000000000168 - PAUSE 0x0000000000000169 - SKIP 0x000000000000016a - EXIT 0x0000000000000171 - REW 0x0000000000000172 - REPLAY 0x0000000000000173 - FFWD 0x0000000000000174 - PLAY 0x0000000000000175 - STOP 0x0000000000000176 - REC 0x0000000000000177 - SKIP 0x0000000000000178 - +100 0x0000000000000179 - LAST 0x000000000000017b - GUIDE 0x000000000000017c - TV/VIDEO 0x000000000000017e - end codes - -end remote diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs deleted file mode 100644 index 91c0de5..0000000 --- a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs +++ /dev/null @@ -1,539 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the RadioShack 15-2116, VCR type 0081 -# using Hauppauge IR receiver -# -# By Jarod Wilson, 2003/12/31 -# Amalgamated from Harry O's -# .lircrc, the mythtv.org docs, and -# a few touches of my own. :) -# - -# Channel Up -begin -prog = mythtv -button = CH+ -repeat = 4 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH- -repeat = 4 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = SELECT -repeat = 4 -config = Return -end - -# Play -begin -prog = mythtv -button = PLAY -repeat = 4 -config = Space -end - -# Stop -begin -prog = mythtv -button = STOP -repeat = 4 -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = EXIT -repeat = 4 -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -repeat = 4 -config = Esc -end - -# Pause -begin -prog = mythtv -button = PAUSE -repeat = 4 -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -repeat = 4 -config = | -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = REW -repeat = 4 -config = Left -end - -begin -prog = mythtv -button = LEFT -repeat = 4 -config = Left -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = FFWD -repeat = 4 -config = Right -end - -begin -prog = mythtv -button = RIGHT -repeat = 4 -config = Right -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = FREEZE -repeat = 4 -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = MOVE -repeat = 4 -config = PgUp -end - -# Record -begin -prog = mythtv -button = REC -repeat = 4 -config = R -end - -# OSD browse -begin -prog = mythtv -button = GUIDE -repeat = 4 -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = MENU -repeat = 4 -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = INFO -repeat = 4 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = +100 -repeat = 4 -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = SLEEP -repeat = 4 -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = ENTER -repeat = 4 -config = Z -end - -# Change TV card input -begin -prog = mythtv -button = TV/VIDEO -repeat = 4 -config = C -end - -# Toggle Picture-In-Picture -begin -prog = mythtv -button = PIP -repeat = 4 -config = V -end - -# Swap PIP -begin -prog = mythtv -button = SWAP -repeat = 4 -config = N -end - -# Cycle through channel history -begin -prog = mythtv -button = LAST -repeat = 4 -config = H -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 4 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 4 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 4 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 4 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 4 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 4 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 4 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 4 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 4 -config = 9 -end - -### MPlayer commands - -begin -prog = mplayer -button = MENU -repeat = 4 -config = osd -end - -begin -prog = mplayer -button = PAUSE -repeat = 4 -config = pause -end - -begin -prog = mplayer -button = PLAY -repeat = 4 -config = seek +1 -end - -begin -prog = mplayer -button = STOP -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = mplayer -button = REW -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = LEFT -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = FFWD -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = RIGHT -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = EXIT -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = FREEZE -repeat = 4 -config = seek +1200 -end - -begin -prog = mplayer -button = MOVE -repeat = 4 -config = seek -1200 -end - -begin -prog = mplayer -button = +100 -repeat = 4 -config = vo_fullscreen -end - -### Xine commands - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = SELECT -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = GUIDE -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFWD -repeat = 3 -config = SeekRelative+30 -end - -begin -prog = xine -button = REW -repeat = 3 -config = SeekRelative-30 -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = FREEZE -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = LAST -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = INFO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = ENTER -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = SLEEP -repeat = 3 -config = SpeedSlower -end diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg Binary files differdeleted file mode 100644 index d465839..0000000 --- a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircrc b/abs/core/live-installer/templates/remotes/gr8zap/lircrc deleted file mode 100644 index 6f86bfe..0000000 --- a/abs/core/live-installer/templates/remotes/gr8zap/lircrc +++ /dev/null @@ -1,472 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY' -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -# ??? -begin - prog = mythtv - button = MUTE - config = F9 -end - -begin - prog = mythtv - button = CH_UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = ] -end - -begin - prog = mythtv - button = CH_DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = [ -end - -begin - prog = mythtv - button = UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = LEFT -# navigates, or skips back during playback or live tv. - config = Left -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = Right -end - -begin - prog = mythtv - button = DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = MENU - config = m -end - -begin - prog = mythtv - button = EXIT - config = Esc -end - -begin - prog = mythtv - button = PLAY - config = l -end - -begin - prog = mythtv - button = PAUSE - config = p -end - -begin - prog = mythtv - button = STOP - config = Esc -end - -begin - prog = mythtv - # skip backward - button = |<< - config = PgUp -end - -begin - prog = mythtv - # skip forward - button = >>| - config = PgDown -end - -begin - prog = mythtv - button = RECORD - config = r -end - -begin - prog = mythtv - # rewind - button = << - config = < -end - -begin - prog = mythtv - # fast forward - button = >> - config = > -end - -begin - prog = mythtv - button = RED - # Delete - config = z -end - -begin - prog = mythtv - button = GREEN - # Info - config = i -end - -begin - prog = mythtv - button = YELLOW - # change aspect ratio - config = w -end - -begin - prog = mythtv - button = BLUE - config = Tab -end - -# MPLAYER -begin - prog = mplayer - button = POWER - config = quit -end - -begin - prog = mplayer - button = MUTE - config = mute -end - -begin - prog = mplayer - button = VOL_UP - repeat = 3 - config = volume +1 -end - -begin - prog = mplayer - button = VOL_DOWN - repeat = 3 - config = volume -1 -end - -begin - prog = mplayer - button = UP - repeat = 3 - config = seek +10 -end - -begin - prog = mplayer - button = LEFT -# navigates, or skips back during playback or live tv. - config = seek -30 -end - -begin - prog = mplayer - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = seek +60 -end - -begin - prog = mplayer - button = DOWN - repeat = 3 - config = seek -10 -end - -begin - prog = mplayer - button = EXIT - config = quit -end - -begin - prog = mplayer - button = play - config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin - prog = mplayer - button = STOP - config = quit -end - -begin - prog = mplayer - # skip backward - button = |<< - config = seek -600 -end - -begin - prog = mplayer - # skip forward - button = >>| - config = seek +600 -end - -begin - prog = mplayer - # slow forward - button = << - config = speed_mult 0.5 -end - -begin - prog = mplayer - # fast forward - button = >> - config = speed_mult 2.0 -end - -### Xine lirc setup By AnDy! - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = UP -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = DOWN -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Menu -end - -begin -prog = xine -button = >> -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = << -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = >>| -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = |<< -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GREEN -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end diff --git a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge deleted file mode 100644 index 4987807..0000000 --- a/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge +++ /dev/null @@ -1,274 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 -# -# contributed by Jens Leuschner <leuschner@gmx.net> -# -# brand: Hauppauge -# model: -# supported devices: WinTV primo; WinTV pci; WinTV radio -# -# This config file will work with both homebrew receivers and -# original Hauppauge TV cards !!! -# - -begin remote - - name Hauppauge - bits 13 - flags SHIFT_ENC - eps 30 - aeps 100 - - one 950 830 - zero 950 830 - plead 960 - gap 89584 - repeat_bit 2 - - begin codes - TV 0x000000000000100F - RADIO 0x000000000000100C - FULL_SCREEN 0x000000000000102E - CH+ 0x0000000000001020 - CH- 0x0000000000001021 - VOL- 0x0000000000001011 - VOL+ 0x0000000000001010 - MUTE 0x000000000000100D - SOURCE 0x0000000000001022 - 1 0x0000000000001001 - 2 0x0000000000001002 - 3 0x0000000000001003 - 4 0x0000000000001004 - 5 0x0000000000001005 - 6 0x0000000000001006 - 7 0x0000000000001007 - 8 0x0000000000001008 - 9 0x0000000000001009 - 0 0x0000000000001000 - RESERVED 0x000000000000101E - MINIMIZE 0x0000000000001026 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 -# -# contributed by -# -# brand: Hauppauge -# model no. of remote control: -# devices being controlled by this remote: PVR 2/350 -# - -begin remote - - name hauppauge_pvr - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 -# -# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at -# members of linux user group Vorarlberg www.lugv.at -# -# for ir remote controler from Hauppauge WinTV Nexus-S -# most of the keys are supported -# -# brand: Hauppauge -# model no. of remote control: WinTV Nexus-S -# devices being controlled by this remote: -# - -begin remote - - name Hauppauge_WinTV_Nexus-S - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 944 828 - zero 944 828 - plead 980 - gap 113932 - min_repeat 1 - toggle_bit 2 - - - begin codes - Up 0x0000000000001794 - Down 0x0000000000001795 - Left 0x0000000000001796 - Right 0x0000000000001797 - Power 0x00000000000017BD - Ok 0x00000000000017A5 - Menu 0x000000000000178D - Back 0x000000000000179F - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - 0 0x0000000000001780 - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Play 0x00000000000017B5 - Pause 0x00000000000017B0 - Stop 0x00000000000017B6 - Record 0x00000000000017B7 - FastFwd 0x00000000000017B4 - FastRwd 0x00000000000017B2 - Channel+ 0x00000000000017A0 - Channel- 0x00000000000017A1 - Volume+ 0x0000000000001790 - Volume- 0x0000000000001791 - Mute 0x000000000000178F - Timers 0x000000000000178A - Recordings 0x000000000000178E - Back 0x000000000000179F - Record 0x00000000000017B7 - Pause 0x00000000000017B0 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge deleted file mode 100644 index d0f36e8..0000000 --- a/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * RADIO -BUTTON2_TOGGLE * VOL+ -BUTTON3_TOGGLE * SOURCE - -BUTTON1_CLICK * TV -BUTTON1_CLICK * VOL- -BUTTON3_CLICK * MUTE - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg b/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg Binary files differdeleted file mode 100644 index a40a1e8..0000000 --- a/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf b/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf deleted file mode 100644 index 97bbf4c..0000000 --- a/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf +++ /dev/null @@ -1,88 +0,0 @@ -# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006 -#
-# contributed by M.Brakemeier -#
-# brand: SoundGraph -# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name iMON-PAD
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 235965
- min_repeat 1
- toggle_bit 0
-
- begin codes
- AppExit 0x288195B7
- Power 0x289115B7 - Record 0x298115B7
- Play 0x2A8115B7
- Open 0x29B1d5B7 - Rewind 0x2A8195B7
- Pause 0x2A9115B7
- FastForward 0x2B8115B7
- PrevChapter 0x2B9115B7
- Stop 0x2B9715B7
- NextChapter 0x298195B7
- Esc 0x2BB715B7
- Eject 0x299395B7
- AppLauncher 0x29B715B7
- MultiMon 0x2AB195B7
- TaskSwitcher 0x2A9395B7
- Mute 0x2B9595B7
- Vol+ 0x28A395B7
- Vol- 0x28A595B7
- Ch+ 0x289395B7
- Ch- 0x288795B7
- Timer 0x2B8395B7
- 1 0x28B595B7
- 2 0x2BB195B7
- 3 0x28B195B7
- 4 0x2A8595B7
- 5 0x299595B7
- 6 0x2AA595B7
- 7 0x2B9395B7
- 8 0x2A8515B7
- 9 0x2AA115B7
- 0 0x2BA595B7
- ShiftTab 0x28B515B7
- Tab 0x29A115B7
- Red 0x2B8515B7 # MyMovie - Green 0x299195B7 # MyMusic - Blue 0x2BA115B7 # MyPhoto - Yellow 0x28A515B7 # MyTV - Bookmark 0x288515B7
- Thumbnail 0x2AB715B7
- AspectRatio 0x29A595B7
- FullScreen 0x2AA395B7
- Purple 0x29A295B7 # MyDVD - Menu 0x2BA385B7
- Caption 0x298595B7
- Language 0x2B8595B7
- MouseKeyboard 0x299115B7
- SelectSpace 0x2A9315B7
- MouseMenu 0x28B715B7
- MouseRightClick 0x688481B7
- Enter 0x28A195B7
- MouseLeftClick 0x688301B7
- WindowsKey 0x2B8195B7
- Backspace 0x28A115B7
- Mouse_N 0x690281B7 - Mouse_S 0x688291B7 - Mouse_W 0x6A8281B7 - Mouse_E 0x688A81B7 - end codes
-
-end remote
diff --git a/abs/core/live-installer/templates/remotes/imon-pad/lircrc b/abs/core/live-installer/templates/remotes/imon-pad/lircrc deleted file mode 100644 index 3ad34d8..0000000 --- a/abs/core/live-installer/templates/remotes/imon-pad/lircrc +++ /dev/null @@ -1,240 +0,0 @@ -################################### -# lircrc config as used by Stev391 June 2007 -# Not all of the buttons are configured yet, only the commonly used buttons -################################### - -# Escape -begin - prog = mythtv - button = AppExit - config = Esc - repeat = 3 -end - -# Escape Key 2 -begin - prog = mythtv - button = Esc - config = Esc -end - -# Channel Up -begin - prog = mythtv - button = Ch+ - config = Up - repeat = 3 -end - -# Channel Down -begin - prog = mythtv - button = Ch- - config = Down - repeat = 3 -end - -# Volume Up -begin - prog = mythtv - button = Vol+ - repeat = 3 - config = Right -end - -# Volume Down -begin - prog = mythtv - button = Vol- - repeat = 3 - config = Left -end - -# Enter/Return -begin - prog = mythtv - button = Enter - config = Return -end - -# Menu Button -begin - prog = mythtv - button = Menu - config = M -end - -# Mute -begin - prog = mythtv - button = Mute - config = F9 -end - -# Rewind -begin - prog = mythtv - button = Rewind - config = PgUp -end - -# Fast Forward -begin - prog = mythtv - button = FastForward - config = PgDown -end - -# Play -begin - prog = mythtv - button = Play - config = P -end - -# Pause -begin - prog = mythtv - button = Pause - config = P -end - -# Record -begin - prog = mythtv - button = Record - config = R -end - -# Stop -begin - prog = mythtv - button = Stop - config = O -end - -# Previous Track/Chapter -begin - prog = mythtv - button = PrevChapter - config = Home -end - -# Next Track/Chapter -begin - prog = mythtv - button = NextChapter - config = End -end - -# Jump Point to MythVideo -begin - prog = mythtv - button = MyMovie - config = F12 -end - -# Jump Point to MythMusic -begin - prog = mythtv - button = MyMusic - config = F11 -end - -# Jump Point to LiveTV -begin - prog = mythtv - button = MyTV - config = F10 -end - -# Jump Point to Main Menu -begin - prog = mythtv - button = Multimon - config = F2 -end - -# Jump Point to Myth Gallery -begin - prog = mythtv - button = MyPhoto - config = F3 -end - -# Jump Point to Play DVD -begin - prog = mythtv - button = MyDVD - config = F4 -end - -# Display Information -begin - prog = mythtv - button = Caption - config = I -end - -############################## -# Numbers -############################## -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end diff --git a/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg b/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg Binary files differdeleted file mode 100644 index 47368c5..0000000 --- a/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf deleted file mode 100644 index ec3b73e..0000000 --- a/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf +++ /dev/null @@ -1,88 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - - begin codes - -# starts at af - Radio 0x00007baf - Print 0x00007bb1 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 -# no ba - d8 - Guide 0x00007bd9 - LiveTV 0x00007bda - DVD 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf - Down 0x00007be0 - Up 0x00007be1 -# no e2,e3 - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChanDown 0x00007bec - ChanUp 0x00007bed - VolDown 0x00007bee - VolUp 0x00007bef - More 0x00007bf0 - Mute 0x00007bf1 - Home 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes - -end remote diff --git a/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb b/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb deleted file mode 100644 index 3738bfa..0000000 --- a/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb +++ /dev/null @@ -1,393 +0,0 @@ -# lircrc.mceusb - -################### -# -# MythTV -# -################### -begin - prog = mythtv - button = One - config = 1 -end - -begin - prog = mythtv - button = Two - config = 2 -end - -begin - prog = mythtv - button = Three - config = 3 -end - -begin - prog = mythtv - button = Four - config = 4 -end - -begin - prog = mythtv - button = Five - config = 5 -end - -begin - prog = mythtv - button = Six - config = 6 -end - -begin - prog = mythtv - button = Seven - config = 7 -end - -begin - prog = mythtv - button = Eight - config = 8 -end - -begin - prog = mythtv - button = Nine - config = 9 -end - -begin - prog = mythtv - button = Zero - config = 0 -end - -begin - prog = mythtv - button = Back - config = Esc -end - -begin - prog = mythtv - button = Guide - config = M -end - -begin - prog = mythtv - button = More - config = I -end - -begin - prog = mythtv - button = VolDown - config = F10 -end - -begin - prog = mythtv - button = VolUp - config = F11 -end - -begin - prog = mythtv - button = Up - config = Up -end - -begin - prog = mythtv - button = Down - config = Down -end - -begin - prog = mythtv - button = Left - config = Left -end - -begin - prog = mythtv - button = Right - config = Right -end - -begin - prog = mythtv - button = Play - config = Return -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = Mute - config = | -end - -begin - prog = mythtv - button = Rewind - config = Left -end - -begin - prog = mythtv - button = Forward - config = Right -end - -begin - prog = mythtv - button = Record - config = R -end - -begin - prog = mythtv - button = Stop - config = O -end - -begin - prog = mythtv - button = Pause - config = P -end - -# Use for backwards commercial skip -begin - prog = mythtv - button = Replay - config = Q -end - -# Use for forward commercial skip -begin - prog = mythtv - button = Skip - config = Z -end - - -################### -# -# MPlayer -# -################### -begin - prog = mplayer - button = Stop - config = quit -end - -begin - prog = mplayer - button = Play - config = seek +1 -end - -begin - prog = mplayer - button = More - config = osd -end - -begin - prog = mplayer - button = Replay - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = Skip - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = Rewind - config = seek -30 - repeat = 1 -end - -begin - prog = mplayer - button = Forward - config = seek +30 - repeat = 1 -end - -begin - prog = mplayer - button = Pause - config = pause -end - -begin - prog = mplayer - button = VolUp - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = VolDown - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = Mute - config = mute -end - -################### -# -# Xine -# -################### -# Xine lirc setup -begin -prog = xine -button = Play -repeat = 3 -config = Play -end - -begin -prog = xine -button = Stop -repeat = 3 -config = Stop -end - -begin -prog = xine -button = Back -repeat = 3 -config = Quit -end - -begin -prog = xine -button = Pause -repeat = 3 -config = Pause -end - -begin -prog = xine -button = Up -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = Down -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = Left -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = Right -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = Home -repeat = 3 -config = Menu -end - -begin -prog = xine -button = Forward -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = Rewind -repeat = 3 -config = SpeedSlower -end - -begin -prog = xine -button = VolUp -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VolDown -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = Mute -repeat = 3 -config = Mute -end - -begin -prog = xine -button = ChanUp -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = ChanDown -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = More -repeat = 3 -config = OSDStreamInfos -end - diff --git a/abs/core/live-installer/templates/remotes/mceusb/preview.jpg b/abs/core/live-installer/templates/remotes/mceusb/preview.jpg Binary files differdeleted file mode 100644 index 0aa6a4a..0000000 --- a/abs/core/live-installer/templates/remotes/mceusb/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/no_remote/preview.jpg b/abs/core/live-installer/templates/remotes/no_remote/preview.jpg Binary files differdeleted file mode 100644 index 1d887dd..0000000 --- a/abs/core/live-installer/templates/remotes/no_remote/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/receiver_usb.id b/abs/core/live-installer/templates/remotes/receiver_usb.id deleted file mode 100644 index b99f91b..0000000 --- a/abs/core/live-installer/templates/remotes/receiver_usb.id +++ /dev/null @@ -1,4 +0,0 @@ -0bc7:0005 snapstream_firefly X10 Wireless Technology, Inc. -0e9c:0000 streamzap Streamzap, Inc. Streamzap Remote Control -0471:0815 mceusb Microsoft usb receiver_transmitter rc6 - diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf deleted file mode 100644 index 288bb51..0000000 --- a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf +++ /dev/null @@ -1,127 +0,0 @@ -# Please make this file available to others -# by sending it to <lirc@bartelmus.de> -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005 -# -# contributed by -# -# brand: Snapstream Firefly Remote -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - -name Snapstream_Firefly -bits 40 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -gap 219964 -toggle_bit 0 - - -begin codes -MAXI 0x0000001481AC0000 -MAXI 0x00000014012C0000 -CLOSE 0x00000014D7020000 -CLOSE 0x0000001457820000 -1 0x00000014628D0000 -1 0x00000014E20D0000 -2 0x00000014E30E0000 -2 0x00000014638E0000 -3 0x00000014648F0000 -3 0x00000014E40F0000 -4 0x00000014E5100000 -4 0x0000001465900000 -5 0x0000001466910000 -5 0x00000014E6110000 -6 0x00000014E7120000 -6 0x0000001467920000 -7 0x0000001468930000 -7 0x00000014E8130000 -8 0x00000014E9140000 -8 0x0000001469940000 -9 0x000000146A950000 -9 0x00000014EA150000 -0 0x00000014EC170000 -0 0x000000146C970000 -BACK 0x000000146B960000 -BACK 0x00000014EB160000 -ENT 0x00000014ED180000 -ENT 0x000000146D980000 -VOL+ 0x000000145E890000 -VOL+ 0x00000014DE090000 -VOL- 0x000000145D880000 -VOL- 0x00000014DD080000 -MUTE 0x000000145F8A0000 -MUTE 0x00000014DF0A0000 -FIREFLY 0x0000001455800000 -FIREFLY 0x00000014D5000000 -CH+ 0x00000014608B0000 -CH+ 0x00000014E00B0000 -CH- 0x00000014618C0000 -CH- 0x00000014E10C0000 -INFO 0x0000001483AE0000 -INFO 0x00000014032E0000 -OPTION 0x0000001484AF0000 -OPTION 0x00000014042F0000 -UP 0x000000146F9A0000 -UP 0x00000014EF1A0000 -LEFT 0x00000014729D0000 -LEFT 0x00000014F21D0000 -DOWN 0x0000001477A20000 -DOWN 0x00000014F7220000 -RIGHT 0x00000014749F0000 -RIGHT 0x00000014F41F0000 -OK 0x00000014739E0000 -OK 0x00000014F31E0000 -MENU 0x00000014719C0000 -MENU 0x00000014F11C0000 -EXIT 0x0000001475A00000 -EXIT 0x00000014F5200000 -REC 0x00000014FC270000 -REC 0x000000147CA70000 -PLAY 0x00000014FA250000 -PLAY 0x000000147AA50000 -STOP 0x00000014FD280000 -STOP 0x000000147DA80000 -REW 0x00000014F9240000 -REW 0x0000001479A40000 -FWD 0x00000014FB260000 -FWD 0x000000147BA60000 -PREV 0x00000014002B0000 -PREV 0x0000001480AB0000 -PAUSE 0x00000014FE290000 -PAUSE 0x000000147EA90000 -NEXT 0x00000014FF2A0000 -NEXT 0x000000147FAA0000 -MUSIC 0x00000014DB060000 -MUSIC 0x000000145B860000 -PHOTOS 0x00000014DA050000 -PHOTOS 0x000000145A850000 -DVD 0x00000014D9040000 -DVD 0x0000001459840000 -TV 0x00000014D8030000 -TV 0x0000001458830000 -VIDEO 0x00000014DC070000 -VIDEO 0x000000145C870000 -HELP 0x00000014D6010000 -HELP 0x0000001456810000 -MOUSE 0x00000014022D0000 -MOUSE 0x0000001482AD0000 -A 0x00000014EE190000 -A 0x000000146E990000 -B 0x00000014F01B0000 -B 0x00000014709B0000 -C 0x00000014F6210000 -C 0x0000001476A10000 -D 0x00000014F8230000 -D 0x0000001478A30000 - -end codes - -end remote
\ No newline at end of file diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt deleted file mode 100644 index e918011..0000000 --- a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt +++ /dev/null @@ -1,590 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the new grey Hauppauge remote -# -# Modified from Jarod Wilson's which came from Jeff Campbell's -# By Brad Templeton - - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive - -begin -prog = mythtv -button = TV -repeat = 3 -config = F5 -end - -begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 -end - -# Not yet defined -begin -prog = mythtv -button = Music -repeat = 3 -config = Up -end - -# Given another function for now, I don't use mythgallery -begin -prog = mythtv -button = Pictures -repeat = 3 -config = F -end - -begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 -end - -# I stuck the "todo" list on here as Myth has no radio function -begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left -end - -begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right -end - -# Channel Up -begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = I -end - -# Escape/Exit/Back -begin -prog = mythtv -button = BACK -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -config = Esc -end - - -# Pause -begin -prog = mythtv -button = Pause -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -repeat = 3 -config = | -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Next -repeat = 3 -config = End -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Previous -repeat = 3 -config = Home -end - -# Record -begin -prog = mythtv -button = Record -repeat = 3 -config = R -end - -# Delete -begin -prog = mythtv -button = Red -repeat = 3 -config = D -end - -# Decrease play speed -begin -prog = mythtv -button = Green -repeat = 3 -config = J -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu -repeat = 3 -config = M -end - -# Scroll up -begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 -end - -# Scroll down -begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 -end - -# Bring up OSD info -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W -end - -# double speed watch -begin -prog = mythtv -button = Yellow -repeat = 3 -config = J -end - -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch -begin -prog = mythtv -button = Blue -repeat = 3 -config = Y -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end
\ No newline at end of file diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg b/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg Binary files differdeleted file mode 100644 index a1fbc6e..0000000 --- a/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core/live-installer/templates/remotes/streamzap/lircrc b/abs/core/live-installer/templates/remotes/streamzap/lircrc deleted file mode 100755 index 5e668b5..0000000 --- a/abs/core/live-installer/templates/remotes/streamzap/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core/live-installer/templates/remotes/streamzap/preview.jpg b/abs/core/live-installer/templates/remotes/streamzap/preview.jpg Binary files differdeleted file mode 100644 index 4d1a5fe..0000000 --- a/abs/core/live-installer/templates/remotes/streamzap/preview.jpg +++ /dev/null diff --git a/abs/core/live-installer/templates/samba/smb.conf.home b/abs/core/live-installer/templates/samba/smb.conf.home deleted file mode 100755 index b850a7d..0000000 --- a/abs/core/live-installer/templates/samba/smb.conf.home +++ /dev/null @@ -1,10 +0,0 @@ -[home] - path = /data/home/mythtv/ - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core/live-installer/templates/samba/smb.conf.media b/abs/core/live-installer/templates/samba/smb.conf.media deleted file mode 100755 index 6a4ec91..0000000 --- a/abs/core/live-installer/templates/samba/smb.conf.media +++ /dev/null @@ -1,10 +0,0 @@ -[media] - path = /data/media - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core/live-installer/templates/samba/smb.conf.template b/abs/core/live-installer/templates/samba/smb.conf.template deleted file mode 100644 index 42ddb99..0000000 --- a/abs/core/live-installer/templates/samba/smb.conf.template +++ /dev/null @@ -1,125 +0,0 @@ -# -#======================= Global Settings ===================================== -[global] - - workgroup = home_lan - server string = MythVantage - -# Security mode. Defines in which mode Samba will operate. Possible -# values are share, user, server, domain and ads. Most people will want -# user level security. See the Samba-HOWTO-Collection for details. - security = share - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page -; hosts allow = 192.168.1. 192.168.2. 127. - - load printers = no - -# you may wish to override the location of the printcap file -; printcap name = /etc/printcap - -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 50 - -# Use password server option only with security = server -# The argument list may include: -# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] -# or to auto-locate the domain controller/s -# password server = * -; password server = <NT-Server-Name> - -# Use the realm option only with security = ads -# Specifies the Active Directory realm the host is part of -; realm = MY_REALM - -# Backend to store user information in. New installations should -# use either tdbsam or ldapsam. smbpasswd is available for backwards -# compatibility. tdbsam requires no further configuration. -; passdb backend = tdbsam - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting. -# Note: Consider carefully the location in the configuration file of -# this line. The included file is read at that point. -; include = /usr/local/samba/lib/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. -; interfaces = 192.168.12.2/24 192.168.13.2/24 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply -; local master = no - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable -; os level = 33 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job -; domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election -; preferred master = yes - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The default is NO. - dns proxy = no - -# These scripts are used on a domain controller or stand-alone -# machine to add or delete corresponding unix accounts -; add user script = /usr/sbin/useradd %u -; add group script = /usr/sbin/groupadd %g -; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u -; delete user script = /usr/sbin/userdel %u -; delete user from group script = /usr/sbin/deluser %u %g -; delete group script = /usr/sbin/groupdel %g - - -#============================ Share Definitions ============================== - - diff --git a/abs/core/live-installer/templates/settings/default_1/keybindings.txt b/abs/core/live-installer/templates/settings/default_1/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core/live-installer/templates/settings/default_1/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core/live-installer/templates/settings/default_1/settings.txt b/abs/core/live-installer/templates/settings/default_1/settings.txt deleted file mode 100644 index 8c3a391..0000000 --- a/abs/core/live-installer/templates/settings/default_1/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat <num> <sign> REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat <num> <name> REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme MythVantage-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style Windows REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoDefaultPlayer Internal REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME -HaltCommand sudo /sbin/poweroff REPLACEME -RebootCommand sudo /sbin/reboot REPLACEME diff --git a/abs/core/live-installer/templates/settings/default_2/keybindings.txt b/abs/core/live-installer/templates/settings/default_2/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core/live-installer/templates/settings/default_2/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core/live-installer/templates/settings/default_2/settings.txt b/abs/core/live-installer/templates/settings/default_2/settings.txt deleted file mode 100644 index 106be04..0000000 --- a/abs/core/live-installer/templates/settings/default_2/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat <num> <sign> REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HaltCommand halt REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat <num> <name> REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme STB-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseDHCP 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME diff --git a/abs/core/live-installer/templates/sources/mv-core b/abs/core/live-installer/templates/sources/mv-core deleted file mode 100644 index f9f6c97..0000000 --- a/abs/core/live-installer/templates/sources/mv-core +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core diff --git a/abs/core/live-installer/templates/sources/mv-core-testing b/abs/core/live-installer/templates/sources/mv-core-testing deleted file mode 100644 index 1fce6ea..0000000 --- a/abs/core/live-installer/templates/sources/mv-core-testing +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core-testing diff --git a/abs/core/live-installer/templates/sources/mv-extra b/abs/core/live-installer/templates/sources/mv-extra deleted file mode 100644 index e13640f..0000000 --- a/abs/core/live-installer/templates/sources/mv-extra +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra diff --git a/abs/core/live-installer/templates/sources/mv-extra-testing b/abs/core/live-installer/templates/sources/mv-extra-testing deleted file mode 100644 index c176add..0000000 --- a/abs/core/live-installer/templates/sources/mv-extra-testing +++ /dev/null @@ -1,2 +0,0 @@ -##Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra-testing diff --git a/abs/core/live-installer/templates/sources/svc_pkg b/abs/core/live-installer/templates/sources/svc_pkg deleted file mode 100644 index c1efdcc..0000000 --- a/abs/core/live-installer/templates/sources/svc_pkg +++ /dev/null @@ -1,3 +0,0 @@ -[svc_pkg] -Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686 - diff --git a/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf deleted file mode 100755 index 51db997..0000000 --- a/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf +++ /dev/null @@ -1,413 +0,0 @@ -# - -begin remote - - name Time_Warner_SA3250 - flags CONST_LENGTH|RAW_CODES - eps 30 - aeps 100 - - ptrail 0 - repeat 0 0 - gap 100240 - frequency 57600 - - begin raw_codes - - name MUTE - 972 802 971 802 1887 778 - 971 798 971 798 972 798 - 971 798 972 798 971 1677 - 972 802 1887 1656 992 - - name POWER - 3450 3229 894 2468 891 2468 - 893 778 892 2468 891 2469 - 917 2444 891 2468 892 2469 - 891 779 892 778 918 752 - 917 754 917 752 892 2471 - 889 779 892 779 892 777 - 892 779 892 777 868 2492 - 892 2469 891 2470 890 - - name GUIDE - 3397 3285 890 2470 840 2519 - 916 755 891 2470 839 2520 - 891 780 891 2474 860 2495 - 892 778 917 754 890 780 - 891 781 864 804 917 2443 - 865 805 891 779 866 2495 - 864 805 892 779 891 2469 - 865 2495 891 2469 866 - - - name INFO - 3449 3231 918 2441 920 2440 - 920 750 947 2414 920 2440 - 920 750 894 777 919 750 - 947 2413 921 750 919 750 - 920 751 919 752 918 2441 - 921 749 895 776 919 2441 - 920 2440 920 2441 920 749 - 921 2439 921 2440 921 - - name UP - 3396 3285 915 2444 919 2442 - 918 752 916 2444 919 2441 - 919 751 916 2445 919 751 - 890 780 916 753 917 754 - 942 729 889 780 916 2445 - 919 751 915 756 914 2448 - 916 752 916 2444 918 2442 - 919 2441 918 2443 918 - - name DOWN - 3421 3261 890 2470 918 2442 - 919 751 916 2446 917 2441 - 919 2442 918 2442 918 752 - 916 2444 919 751 890 780 - 916 755 915 755 915 2445 - 919 753 914 755 889 781 - 889 781 916 2444 919 752 - 889 2471 919 2441 918 - - name LEFT - 3427 3255 918 2441 924 2437 - 920 750 918 2442 920 2441 - 919 2440 921 2439 921 750 - 919 751 944 726 919 752 - 917 753 918 751 944 2417 - 920 750 893 777 919 751 - 919 752 918 2441 921 2440 - 920 2440 920 2440 921 - - name RIGHT - 3424 3258 892 2466 921 2439 - 896 774 920 2441 920 2440 - 920 750 920 751 945 2414 - 921 750 919 751 920 750 - 919 752 919 751 919 2440 - 921 750 918 752 918 2442 - 920 2440 921 749 918 2443 - 920 2440 920 2441 919 - - name SELECT - 3424 3257 944 2416 919 2442 - 919 750 918 2442 920 2441 - 919 751 943 727 918 2442 - 920 2440 920 752 916 752 - 969 702 917 753 892 2468 - 919 751 892 778 918 2442 - 924 2436 921 750 917 753 - 918 2443 919 2441 919 - - name SETTINGS - 3402 3278 871 2491 921 2438 - 921 749 922 2440 919 2441 - 919 2440 921 749 921 750 - 895 2465 920 2440 921 2440 - 920 749 896 775 921 2439 - 920 749 923 748 895 775 - 922 2439 920 2440 920 749 - 897 774 896 774 921 - - name EXIT - 3400 3279 896 2464 921 2439 - 921 750 895 2465 921 2439 - 921 749 898 772 896 2465 - 920 2440 920 750 920 2441 - 920 749 896 774 870 2491 - 921 749 921 749 895 2465 - 921 2440 920 749 922 748 - 897 2464 920 750 896 - - name PGUP - 3425 3255 920 2440 920 2440 - 921 749 895 2466 920 2440 - 920 749 920 2441 896 2464 - 921 749 919 2445 917 2440 - 920 750 920 750 920 2441 - 921 748 921 749 920 2440 - 921 750 919 752 919 2440 - 921 749 921 750 919 - - name PGDN - 3400 3281 921 2438 921 2441 - 920 749 895 2465 896 2465 - 920 2440 920 2440 920 2440 - 921 749 896 2465 895 2465 - 920 750 895 775 920 2440 - 921 749 921 750 895 775 - 896 774 896 774 921 2439 - 921 749 921 751 894 - - name VOLUP - 995 778 1886 779 994 775 - 995 777 993 774 996 774 - 995 775 995 1654 1885 778 - 995 775 995 774 995 - - name VOLDN - 996 778 971 802 1862 803 - 970 799 996 774 995 774 - 996 774 995 1654 1886 778 - 996 773 971 1678 991 - - name CHUP - 3421 3259 916 2444 918 2443 - 918 751 917 2444 919 2441 - 919 2441 919 751 916 2444 - 919 2441 919 2443 918 751 - 941 729 916 755 917 2442 - 919 752 916 754 891 778 - 918 2444 918 751 916 754 - 917 753 916 2445 919 - - name CHDN - 3421 3260 915 2445 918 2442 - 919 751 891 2469 919 2441 - 927 745 915 2444 919 2441 - 919 2441 919 2442 918 752 - 915 755 890 780 917 2443 - 919 752 916 754 915 2445 - 919 751 915 755 890 781 - 914 756 916 2445 917 - - name A - 3425 3258 916 2442 920 2441 - 919 751 918 2442 919 2441 - 920 2440 920 2441 919 2441 - 919 2441 920 750 917 2443 - 920 751 917 752 919 2442 - 920 750 918 753 917 753 - 917 753 942 728 917 753 - 918 2442 920 750 942 - - name B - 3398 3283 916 2443 892 2470 - 892 778 892 2468 891 2475 - 886 779 916 754 892 777 - 892 778 919 2442 891 2468 - 918 753 892 778 891 2469 - 892 778 892 778 918 2443 - 891 2469 892 2467 893 2469 - 891 778 918 753 892 - - name C - 3396 3283 891 2469 892 2468 - 892 778 917 2444 892 2468 - 892 2469 891 778 892 779 - 893 777 892 2468 892 2468 - 918 752 893 777 892 2469 - 892 778 892 778 867 802 - 918 2444 917 2442 868 2492 - 893 778 892 779 916 - - name 1 - 3424 3257 890 2470 865 2495 - 891 780 892 2468 865 2495 - 892 777 891 780 892 779 - 890 780 916 2444 865 805 - 891 779 917 753 916 2445 - 865 805 916 754 892 2469 - 865 2494 916 2445 865 2495 - 891 779 917 2443 866 - - name 2 - 3422 3258 916 2444 865 2496 - 889 782 915 2444 865 2495 - 917 2444 839 830 891 780 - 915 755 890 2470 864 806 - 917 753 891 780 866 2495 - 864 805 891 779 892 779 - 865 2494 865 2496 891 2469 - 865 805 891 2469 865 - - name 3 - 3397 3284 916 2443 892 2468 - 892 779 893 2467 892 2468 - 917 753 892 2469 891 778 - 893 778 891 2469 892 778 - 918 753 890 779 893 2468 - 891 779 893 778 891 2469 - 892 777 893 2468 891 2468 - 917 754 943 2417 892 - - name 4 - 3421 3261 890 2470 839 2520 - 917 753 891 2470 865 2495 - 917 2443 865 2495 890 781 - 891 778 891 2470 865 804 - 895 776 892 779 891 2468 - 866 805 917 753 943 727 - 866 805 889 2471 865 2494 - 892 780 916 2444 865 - - name 5 - 3396 3282 920 2441 892 2467 - 894 778 891 2468 892 2469 - 891 780 866 802 893 2470 - 890 779 918 2443 891 777 - 892 779 918 752 892 2468 - 892 779 918 752 918 2443 - 891 2469 891 779 891 2469 - 892 778 891 2468 893 - - name 6 - 3396 3284 918 2442 866 2494 - 892 778 917 2444 866 2494 - 917 2444 865 804 893 2468 - 890 780 916 2445 890 779 - 892 779 891 778 918 2443 - 891 778 892 779 892 779 - 891 2468 892 778 919 2444 - 889 778 893 2468 891 - - name 7 - 3398 3282 893 2467 892 2468 - 893 779 891 2469 891 2468 - 919 752 892 2467 892 2469 - 891 779 892 2468 892 777 - 893 778 918 752 892 2468 - 893 779 916 753 918 2442 - 892 779 891 778 893 2468 - 892 778 893 2467 892 - - name 8 - 3448 3232 892 2468 866 2494 - 892 779 892 2467 867 2494 - 891 2469 866 2495 891 2469 - 865 805 968 2394 864 804 - 918 753 891 779 892 2468 - 866 804 917 754 891 780 - 916 752 917 754 892 2469 - 865 804 893 2468 890 - - name 9 - 3422 3258 891 2469 839 2521 - 891 780 892 2468 824 2536 - 916 754 916 755 891 779 - 866 2494 839 2522 891 778 - 892 778 890 781 915 2448 - 837 831 891 779 890 2470 - 837 2523 942 2418 838 832 - 892 778 890 2471 839 - - name 0 - 3398 3284 891 2469 890 2469 - 893 779 891 2468 892 2468 - 892 2468 892 778 892 779 - 891 2469 892 2468 893 778 - 892 777 893 777 893 2469 - 891 778 892 779 868 802 - 917 2443 892 2469 890 779 - 891 779 892 2468 893 - - name LAST - 3422 3258 891 2471 916 2443 - 891 780 891 2469 272 3088 - 865 805 916 2445 308 3052 - 890 2469 892 779 915 756 - 889 781 889 780 890 2471 - 890 779 889 781 891 2471 - 272 1397 890 779 891 781 - 890 2469 448 2912 917 - - name FAV - 3423 3257 918 2442 944 2417 - 917 753 892 2469 890 2471 - 324 3036 890 2469 379 289 - 167 2525 891 2470 379 2981 - 890 780 378 270 242 781 - 866 806 889 2469 786 884 - 891 779 891 779 892 779 - 916 754 890 779 892 778 - 891 2470 839 - - name REW - 3420 3258 916 2445 326 3033 - 891 780 916 2443 891 2469 - 916 2445 838 831 918 754 - 890 2471 837 832 916 2444 - 838 832 891 779 916 2445 - 838 831 892 779 890 780 - 892 2469 839 2520 891 780 - 915 2444 836 836 890 - - name PLAY - 3448 3233 916 2444 891 2469 - 917 753 892 2468 918 2443 - 941 2420 891 2468 917 754 - 915 755 914 2446 918 2443 - 916 754 916 753 945 2416 - 943 727 941 729 918 752 - 917 753 919 2442 916 2444 - 915 755 943 728 916 - - name FF - 3420 3259 917 2442 946 2415 - 918 752 916 2445 918 2441 - 943 728 917 753 942 728 - 892 2470 864 806 889 2471 - 865 805 918 752 916 2443 - 944 726 892 779 891 2470 - 891 2469 915 2445 917 753 - 890 2471 222 1447 891 - - name PAUSE - 3421 3259 891 2470 787 2573 - 890 780 916 2444 840 2520 - 892 2468 864 806 917 2444 - 839 831 890 780 891 779 - 891 780 891 779 889 2471 - 839 831 916 755 915 754 - 892 2469 839 830 917 2444 - 840 2521 891 2469 840 - - name STOP - 3398 3284 889 2471 325 3036 - 891 779 890 2470 395 290 - 140 2535 889 781 890 781 - 889 2470 274 1397 891 2470 - 272 3087 917 754 890 780 - 889 2472 293 1377 890 779 - 916 2444 448 2913 916 754 - 866 2495 325 1344 891 779 - 915 - - name REC - 3421 3258 917 2444 916 2444 - 942 729 942 2420 889 2469 - 992 2367 942 730 891 2468 - 917 754 916 2443 892 2470 - 892 777 916 754 892 2467 - 943 730 916 754 891 779 - 917 2442 917 754 943 2417 - 918 753 915 754 892 - - name BYPASS - 3450 3231 891 2470 890 2470 - 917 753 916 2447 913 2445 - 273 3088 889 780 890 2470 - 891 2469 916 755 890 780 - 942 727 918 752 916 2444 - 890 782 916 754 865 805 - 891 2469 891 780 889 781 - 891 2468 259 3102 866 - - name TV/VCR - 19945 3915 612 1873 560 1926 - 560 1925 561 931 560 931 - 587 905 559 931 563 931 - 557 932 561 1925 585 908 - 583 1901 559 931 586 905 - 585 907 610 1875 561 1924 - 561 1926 559 1926 535 1951 - 559 1925 586 907 585 1899 - 560 931 1048 7898 3707 3862 - 587 1899 586 1899 586 1900 - 559 932 586 908 323 - - end raw_codes - - end remote diff --git a/abs/core/live-installer/templates/xine.config.template b/abs/core/live-installer/templates/xine.config.template deleted file mode 100644 index 966487f..0000000 --- a/abs/core/live-installer/templates/xine.config.template +++ /dev/null @@ -1,754 +0,0 @@ -# -# xine config file -# -.version:2 - -# Entries which are still set to their default values are commented out. -# Remove the '#' at the beginning of the line, if you want to change them. - -# Enable deinterlacing by default -# bool, default: 0 -#gui.deinterlace_by_default:0 - -# Configuration experience level -# { Beginner Advanced Expert Master of the known universe }, default: 0 -gui.experience_level:Expert - -# Enable OSD support -# bool, default: 1 -#gui.osd_enabled:1 - -# Dismiss OSD time (s) -# numeric, default: 3 -#gui.osd_timeout:3 - -# Ask user for playback with unsupported codec -# bool, default: 0 -#gui.play_anyway:0 - -# Automatically reload old playlist -# bool, default: 0 -#gui.playlist_auto_reload:0 - -# Audio visualization plugin -# { oscope fftscope fftgraph goom }, default: 0 -gui.post_audio_plugin:fftgraph - -# gui skin theme -# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4 -gui.skin:KeramicRH8 - -# Change xine's behavior for unexperienced user -# bool, default: 1 -#gui.smart_mode:1 - -# Snapshot location -# string, default: /home/jams -#gui.snapshotdir:/home/jams - -# Display splash screen -# bool, default: 1 -gui.splash:0 - -# Subtitle autoloading -# bool, default: 1 -#gui.subtitle_autoload:1 - -# Visual animation style -# { None Post Plugin Stream Animation }, default: 1 -#gui.visual_anim:Post Plugin - -# Windows stacking (more) -# bool, default: 0 -#gui.always_layer_above:0 - -# Audio mixer control method -# { Sound card Software }, default: 0 -#gui.audio_mixer_method:Sound card - -# Visiblility behavior of panel -# bool, default: 0 -#gui.auto_panel_visibility:0 - -# Visibility behavior of output window -# bool, default: 0 -#gui.auto_video_output_visibility:0 - -# Deinterlace plugin. -# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 -#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 - -# Event sender behavior -# bool, default: 1 -#gui.eventer_sticky:1 - -# Windows stacking -# bool, default: 0 -#gui.layer_above:0 - -# Use unscaled OSD -# bool, default: 1 -gui.osd_use_unscaled:0 - -# Screensaver reset interval (s) -# numeric, default: 10 -#gui.screensaver_timeout:10 - -# Menu shortcut style -# { Windows style Emacs style }, default: 0 -#gui.shortcut_style:Windows style - -# Stream information -# bool, default: 0 -#gui.sinfo_auto_update:0 - -# Skin Server Url -# string, default: http://xine.sourceforge.net/skins/skins.slx -#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx - -# Chapter hopping -# bool, default: 1 -#gui.skip_by_chapter:1 - -# New stream sizes resize output window -# bool, default: 1 -#gui.stream_resize_window:1 - -# Tips timeout (ms) -# numeric, default: 5000 -#gui.tips_timeout:5000 - -# gui tips visibility -# bool, default: 1 -#gui.tips_visible:1 - -# Name of video display -# string, default: -#gui.video_display: - -# Synchronized X protocol (debug) -# bool, default: 0 -#gui.xsynchronize:0 - -# Double size for small streams (require stream_resize_window) -# bool, default: 0 -#gui.zoom_small_stream:0 - -# Logo mrl -# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv -#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv - -# use XVidModeExtension when switching to fullscreen -# bool, default: 0 -#gui.use_xvidext:0 - -# height for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_height:-8192 - -# width for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_width:-8192 - -# x coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_x:-8192 - -# y coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_y:-8192 - -# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3) -# string, default: 0 1 -#gui.xinerama_use_screens:0 1 - -# Amplification level -# [0..200], default: 100 -#gui.amp_level:100 - -# gui panel visibility -# bool, default: 1 -gui.panel_visible:0 - -# numeric, default: 200 -gui.panel_x:21 - -# numeric, default: 100 -gui.panel_y:1050 - -gui.control_x:186 - -gui.control_y:46 - -gui.dropped_frames_warning:0 - -gui.eventer_x:1041 - -gui.eventer_y:781 - -gui.mrl_browser_x:23 - -gui.mrl_browser_y:9 - -gui.setup_x:717 - -gui.setup_y:227 - -gui.viewlog_x:200 - -gui.viewlog_y:210 - -# color specification yuv-opacity -# string, default: 8080c0-f -#gui.osdmenu.color_focused_button:8080c0-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_slider:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_slider_knob:ff8080-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_text_border:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_text_foreground:ff8080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_border:0080c0-f - -# color specification yuv-opacity -# string, default: c08080-f -#gui.osdmenu.color_label_foreground:c08080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_window:0080c0-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_slider:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_slider_knob:ffff00-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_text_border:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_text_foreground:ffff00-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_text_window:0080c0-f - -# directory a media in dvd device will be mounted -# string, default: /dvd -#gui.osdmenu.dvd_mountpoint:/dvd - -# palette (foreground-border-background) to use for subtitles and OSD -# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0 -#ui.osd.text_palette:white-black-transparent - -# audio driver to use -# { auto null alsa oss esd file none }, default: 0 -audio.driver:oss - -# a/v sync method to use by OSS -# { auto getodelay getoptr softsync probebuffer }, default: 0 -#audio.oss_sync_method:auto - -# use A/52 dynamic range compression -# bool, default: 0 -#audio.a52.dynamic_range:0 - -# downmix audio to 2 channel surround stereo -# bool, default: 0 -#audio.a52.surround_downmix:0 - -# A/52 volume -# [0..200], default: 100 -#audio.a52.level:100 - -# OSS audio device name -# { auto /dev/dsp /dev/sound/dsp }, default: 0 -#audio.device.oss_device_name:auto - -# OSS audio device number, -1 for none -# numeric, default: -1 -#audio.device.oss_device_number:-1 - -# OSS audio mixer number, -1 for none -# numeric, default: -1 -#audio.device.oss_mixer_number:-1 - -audio.device.alsa_front_device:default - -# speaker arrangement -# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1 -#audio.output.speaker_arrangement:Stereo 2.0 - -# offset for digital passthrough -# numeric, default: 0 -#audio.synchronization.passthrough_offset:0 - -# play audio even on slow/fast speeds -# bool, default: 0 -#audio.synchronization.slow_fast_audio:0 - -# method to sync audio and video -# { metronom feedback resample }, default: 0 -#audio.synchronization.av_sync_method:metronom feedback - -# always resample to this rate (0 to disable) -# numeric, default: 0 -#audio.synchronization.force_rate:0 - -# enable resampling -# { auto off on }, default: 0 -#audio.synchronization.resample_mode:auto - -# startup audio volume -# [0..100], default: 50 -#audio.volume.mixer_volume:50 - -# restore volume level at startup -# bool, default: 0 -#audio.volume.remember_volume:0 - -# video driver to use -# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0 -#video.driver:auto - -# pitch alignment workaround -# bool, default: 0 -#video.device.xv_pitch_alignment:0 - -# disable exact alpha blending of overlays -# bool, default: 0 -#video.output.disable_exact_alphablend:0 - -# disable all video scaling -# bool, default: 0 -#video.output.disable_scaling:0 - -# horizontal image position in the output window -# [0..100], default: 50 -#video.output.horizontal_position:50 - -# vertical image position in the output window -# [0..100], default: 50 -#video.output.vertical_position:50 - -# deinterlace method (deprecated) -# { none bob weave greedy onefield onefield_xv linearblend }, default: 4 -video.output.xv_deinterlace_method:linearblend - -# MPEG-4 postprocessing quality -# [0..6], default: 3 -#video.processing.ffmpeg_pp_quality:3 - -# DXR3 device number -# numeric, default: 0 -#dxr3.device_number:0 - -# swap odd and even lines -# bool, default: 0 -#dxr3.encoding.swap_fields:0 - -# add black bars to correct aspect ratio -# bool, default: 1 -#dxr3.encoding.add_bars:1 - -# use smooth play mode for mpeg encoder playback -# bool, default: 1 -#dxr3.encoding.alt_play_mode:1 - -# device used for CD audio -# string, default: /dev/cdrom -#media.audio_cd.device:/dev/cdrom - -# slow down disc drive to this speed factor -# numeric, default: 4 -#media.audio_cd.drive_slowdown:4 - -# query CDDB -# bool, default: 1 -#media.audio_cd.use_cddb:1 - -# CDDB cache directory -# string, default: /home/jams/.xine/cddbcache -#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache - -# CDDB server port -# numeric, default: 8880 -#media.audio_cd.cddb_port:8880 - -# CDDB server name -# string, default: freedb.freedb.org -#media.audio_cd.cddb_server:freedb.freedb.org - -# directory for saving streams -# string, default: -#media.capture.save_dir: - -# Number of dvb card to use. -# numeric, default: 0 -#media.dvb.adapter:0 - -# Remember last DVB channel watched -# bool, default: 1 -#media.dvb.remember_channel:1 - -# Last DVB channel viewed -# numeric, default: -1 -#media.dvb.last_channel:-1 - -# default language for DVD playback -# string, default: en -#media.dvd.language:en - -# region the DVD player claims to be in (1 to 8) -# numeric, default: 1 -#media.dvd.region:1 - -# device used for DVD playback -# string, default: /dev/dvd -#media.dvd.device:/dev/dvd - -# raw device set up for DVD access -# string, default: /dev/rdvd -#media.dvd.raw_device:/dev/rdvd - -# read-ahead caching -# bool, default: 1 -#media.dvd.readahead:1 - -# CSS decryption method -# { key disc title }, default: 0 -#media.dvd.css_decryption_method:key - -# play mode when title/chapter is given -# { entire dvd one chapter }, default: 0 -#media.dvd.play_single_chapter:entire dvd - -# unit for seeking -# { seek in program chain seek in program }, default: 0 -#media.dvd.seek_behaviour:seek in program chain - -# unit for the skip action -# { skip program skip part skip title }, default: 0 -#media.dvd.skip_behaviour:skip program - -# path to the title key cache -# string, default: /home/jams/.dvdcss/ -#media.dvd.css_cache_path:/home/jams/.dvdcss/ - -# file browsing start location -# string, default: /home/jams -#media.files.origin_path:/home/jams - -# list hidden files -# bool, default: 0 -#media.files.show_hidden_files:0 - -# network bandwidth -# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10 -#media.network.bandwidth:1.5 Mbps (T1) - -# Timeout for network stream reading (in seconds) -# numeric, default: 30 -#media.network.timeout:30 - -# Domains for which to ignore the HTTP proxy -# string, default: -#media.network.http_no_proxy: - -# HTTP proxy host -# string, default: -#media.network.http_proxy_host: - -# HTTP proxy password -# string, default: -#media.network.http_proxy_password: - -# HTTP proxy port -# numeric, default: 80 -#media.network.http_proxy_port:80 - -# HTTP proxy username -# string, default: -#media.network.http_proxy_user: - -# MMS protocol -# { auto TCP HTTP }, default: 0 -#media.network.mms_protocol:auto - -# automatically advance VCD track/entry -# bool, default: 1 -#media.vcd.autoadvance:1 - -# VCD default type to use on autoplay -# { MPEG track entry segment playback-control item }, default: 3 -#media.vcd.autoplay:playback-control item - -# CD-ROM drive used for VCD when none given -# string, default: -#media.vcd.device: - -# VCD position slider range -# { auto track entry }, default: 0 -#media.vcd.length_reporting:auto - -# show 'rejected' VCD LIDs -# bool, default: 0 -#media.vcd.show_rejected:0 - -# VCD format string for stream comment field -# string, default: %P - Track %T -#media.vcd.comment_format:%P - Track %T - -# VCD debug flag mask -# numeric, default: 0 -#media.vcd.debug:0 - -# VCD format string for display banner -# string, default: %F - %I %N%L%S, disk %c of %C - %v %A -#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A - -# v4l radio device -# string, default: /dev/v4l/radio0 -#media.video4linux.radio_device:/dev/v4l/radio0 - -# v4l video device -# string, default: /dev/v4l/video0 -#media.video4linux.video_device:/dev/v4l/video0 - -# device used for WinTV-PVR 250/350 (pvr plugin) -# string, default: /dev/video0 -#media.wintv_pvr.device:/dev/video0 - -# path to RealPlayer codecs -# string, default: /usr/lib/win32 -#decoder.external.real_codecs_path:/usr/lib/win32 - -# path to Win32 codecs -# string, default: /usr/lib/win32 -#decoder.external.win32_codecs_path:/usr/lib/win32 - -# subtitle size -# { tiny small normal large very large huge }, default: 1 -#subtitles.separate.subtitle_size:small - -# subtitle vertical offset -# numeric, default: 0 -#subtitles.separate.vertical_offset:0 - -# font for subtitles -# string, default: sans -#subtitles.separate.font:sans - -# encoding of the subtitles -# string, default: iso-8859-1 -#subtitles.separate.src_encoding:iso-8859-1 - -# use unscaled OSD if possible -# bool, default: 1 -#subtitles.separate.use_unscaled_osd:1 - -# default duration of subtitle display in seconds -# numeric, default: 4 -#subtitles.separate.timeout:4 - -# frames per second to generate -# numeric, default: 14 -#effects.goom.fps:14 - -# goom image height -# numeric, default: 240 -#effects.goom.height:240 - -# goom image width -# numeric, default: 320 -#effects.goom.width:320 - -# colorspace conversion method -# { Fast but not photorealistic Slow but looks better }, default: 0 -#effects.goom.csc_method:Fast but not photorealistic - -# number of audio buffers -# numeric, default: 230 -#engine.buffers.audio_num_buffers:230 - -# number of video buffers -# numeric, default: 500 -#engine.buffers.video_num_buffers:500 - -# default number of video frames -# numeric, default: 15 -#engine.buffers.video_num_frames:15 - -# priority for a/52 decoder -# numeric, default: 0 -#engine.decoder_priorities.a/52:0 - -# priority for bitplane decoder -# numeric, default: 0 -#engine.decoder_priorities.bitplane:0 - -# priority for dts decoder -# numeric, default: 0 -#engine.decoder_priorities.dts:0 - -# priority for dvaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.dvaudio:0 - -# priority for dxr3-mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-mpeg2:0 - -# priority for dxr3-spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-spudec:0 - -# priority for faad decoder -# numeric, default: 0 -#engine.decoder_priorities.faad:0 - -# priority for ffmpeg-wmv8 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv8:0 - -# priority for ffmpeg-wmv9 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv9:0 - -# priority for ffmpegaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegaudio:0 - -# priority for ffmpegvideo decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegvideo:0 - -# priority for gdkpixbuf decoder -# numeric, default: 0 -#engine.decoder_priorities.gdkpixbuf:0 - -# priority for gsm610 decoder -# numeric, default: 0 -#engine.decoder_priorities.gsm610:0 - -# priority for image decoder -# numeric, default: 0 -#engine.decoder_priorities.image:0 - -# priority for mad decoder -# numeric, default: 0 -#engine.decoder_priorities.mad:0 - -# priority for mpc decoder -# numeric, default: 0 -#engine.decoder_priorities.mpc:0 - -# priority for mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.mpeg2:0 - -# priority for nsf decoder -# numeric, default: 0 -#engine.decoder_priorities.nsf:0 - -# priority for pcm decoder -# numeric, default: 0 -#engine.decoder_priorities.pcm:0 - -# priority for qta decoder -# numeric, default: 0 -#engine.decoder_priorities.qta:0 - -# priority for qtv decoder -# numeric, default: 0 -#engine.decoder_priorities.qtv:0 - -# priority for real decoder -# numeric, default: 0 -#engine.decoder_priorities.real:0 - -# priority for realadec decoder -# numeric, default: 0 -#engine.decoder_priorities.realadec:0 - -# priority for rgb decoder -# numeric, default: 0 -#engine.decoder_priorities.rgb:0 - -# priority for spucc decoder -# numeric, default: 0 -#engine.decoder_priorities.spucc:0 - -# priority for spucmml decoder -# numeric, default: 0 -#engine.decoder_priorities.spucmml:0 - -# priority for spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.spudec:0 - -# priority for spudvb decoder -# numeric, default: 0 -#engine.decoder_priorities.spudvb:0 - -# priority for sputext decoder -# numeric, default: 0 -#engine.decoder_priorities.sputext:0 - -# priority for theora decoder -# numeric, default: 0 -#engine.decoder_priorities.theora:0 - -# priority for vorbis decoder -# numeric, default: 0 -#engine.decoder_priorities.vorbis:0 - -# priority for win32a decoder -# numeric, default: 0 -#engine.decoder_priorities.win32a:0 - -# priority for win32v decoder -# numeric, default: 0 -#engine.decoder_priorities.win32v:0 - -# priority for yuv decoder -# numeric, default: 0 -#engine.decoder_priorities.yuv:0 - -# media format detection strategy -# { default reverse content extension }, default: 0 -#engine.demux.strategy:default - -# memcopy method used by xine -# { probe libc kernel mmx mmxext sse }, default: 0 -engine.performance.memcpy_method:libc - -# percentage of discarded frames to tolerate -# numeric, default: 10 -#engine.performance.warn_discarded_threshold:10 - -# percentage of skipped frames to tolerate -# numeric, default: 10 -#engine.performance.warn_skipped_threshold:10 - -# allow implicit changes to the configuration (e.g. by MRL) -# bool, default: 0 -#misc.implicit_config:0 - diff --git a/abs/core/live-installer/templates/xorg/modeline.ATSC b/abs/core/live-installer/templates/xorg/modeline.ATSC deleted file mode 100644 index b2cd709..0000000 --- a/abs/core/live-installer/templates/xorg/modeline.ATSC +++ /dev/null @@ -1,33 +0,0 @@ -ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750 - -ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525 - -ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync - -ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace - -ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace - -Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace - -Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace - -Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace - -Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace - -Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 - -Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace - -Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - -Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync diff --git a/abs/core/live-installer/templates/xorg/modeline.DVD b/abs/core/live-installer/templates/xorg/modeline.DVD deleted file mode 100644 index 9e846d0..0000000 --- a/abs/core/live-installer/templates/xorg/modeline.DVD +++ /dev/null @@ -1,9 +0,0 @@ -#DVD-NativeModes -ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525 diff --git a/abs/core/live-installer/templates/xorg/modeline.NTSC b/abs/core/live-installer/templates/xorg/modeline.NTSC deleted file mode 100644 index 5536c1b..0000000 --- a/abs/core/live-installer/templates/xorg/modeline.NTSC +++ /dev/null @@ -1,10 +0,0 @@ -#Analog-RegularModes -ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace -ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525 -ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace -ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525 -ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace -ModeLine "Broadcast-59.94p" 483 484 492 525 -ModeLine "VHS-59.94i" 483 484 492 525 Interlace -ModeLine "VHS-59.94p" 483 484 492 525 - diff --git a/abs/core/live-installer/templates/xorg/modeline.VESA b/abs/core/live-installer/templates/xorg/modeline.VESA deleted file mode 100644 index a026f64..0000000 --- a/abs/core/live-installer/templates/xorg/modeline.VESA +++ /dev/null @@ -1,163 +0,0 @@ -# 640x350 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync - -# 640x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync - -# 720x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync - -# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz -ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync - -# 640x480 @ 72Hz (VESA) hsync: 37.9kHz -ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync - -# 640x480 @ 75Hz (VESA) hsync: 37.5kHz -ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync - -# 640x480 @ 85Hz (VESA) hsync: 43.3kHz -ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync - -# 800x600 @ 56Hz (VESA) hsync: 35.2kHz -ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync - -# 800x600 @ 60Hz (VESA) hsync: 37.9kHz -ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync - -# 800x600 @ 72Hz (VESA) hsync: 48.1kHz -ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync - -# 800x600 @ 75Hz (VESA) hsync: 46.9kHz -ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync - -# 800x600 @ 85Hz (VESA) hsync: 53.7kHz -ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync - -# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz -ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace - -# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz -ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync - -# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz -ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync - -# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz -ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync - -# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz -ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync - -# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz -ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync - -# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz -ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync - -# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz -ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync - -# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz -ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz -ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz -ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync - -# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz -ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync -# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz -ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz -ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz -ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz -ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz -ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync - -# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz -ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync - -# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz -ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync - -# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync - -# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz -ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync - -# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync - -# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz -ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync - -# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz -ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync - -# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz -ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync - -# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz -ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync - -# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz -ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync - -# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz -ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync - -# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz -ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync - -# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz -ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync - -# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz -ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync - -# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz -ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync - -# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz -ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync - -# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz -ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync - -# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz -ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync - -# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz -ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync - -# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz -ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync - -# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz -ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync - -# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz -ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync - -# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz -ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync - -# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz -ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync - -# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz -ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync - -# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz -ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync diff --git a/abs/core/live-installer/templates/xorg/modeline.custom b/abs/core/live-installer/templates/xorg/modeline.custom deleted file mode 100644 index ca6d678..0000000 --- a/abs/core/live-installer/templates/xorg/modeline.custom +++ /dev/null @@ -1 +0,0 @@ -ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.ati b/abs/core/live-installer/templates/xorg/xorg.conf.ati deleted file mode 100644 index c6d9249..0000000 --- a/abs/core/live-installer/templates/xorg/xorg.conf.ati +++ /dev/null @@ -1,94 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "aticonfig-Screen[0]" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/TTF" - FontPath "/usr/share/fonts/Type1" -EndSection - -Section "Module" - Load "xtrap" - Load "dbe" - Load "record" - Load "extmod" - Load "dri" - Load "type1" - Load "freetype" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "kbd" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/input/mice" - Option "ZAxisMapping" "4 5 6 7" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" -EndSection - -Section "Monitor" - Identifier "aticonfig-Monitor[0]" -# HorizSync -# VertRefresh - Option "VendorName" "ATI Proprietary Driver" - Option "ModelName" "Generic Autodetecting Monitor" - Option "DPMS" "true" -EndSection - -Section "Device" - - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "ShadowFB" # [<bool>] - #Option "DefaultRefresh" # [<bool>] - #Option "ModeSetClearScreen" # [<bool>] - Identifier "Card0" - Driver "vesa" - VendorName "ATI Technologies Inc" - BoardName "RV370 5B60 [Radeon X300 (PCIE)]" - BusID "PCI:1:0:0" -EndSection - -Section "Device" - Identifier "aticonfig-Device[0]" - Driver "fglrx" -#INSERT HERE - -# Option "ForceMonitors" "tv,nocrt1,notmds1" -# Option "TVStandard" "SCART" -# Option "TVFormat" "PAL-B" -EndSection - - -Section "Screen" - Identifier "aticonfig-Screen[0]" - Device "aticonfig-Device[0]" - Monitor "aticonfig-Monitor[0]" - DefaultDepth 24 - SubSection "Display" - Viewport 0 0 - Depth 24 - Modes "640x480" - EndSubSection -EndSection - diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.intel b/abs/core/live-installer/templates/xorg/xorg.conf.intel deleted file mode 100644 index a4d258a..0000000 --- a/abs/core/live-installer/templates/xorg/xorg.conf.intel +++ /dev/null @@ -1,148 +0,0 @@ -Section "ServerLayout" - Identifier "Xorg Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "PS/2 Mouse" "CorePointer" -# Serial Mouse not detected -# USB Mouse not detected -EndSection - -Section "ServerFlags" - Option "AllowMouseOpenFail" "true" - -EndSection - -Section "Files" - RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc:unscaled" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi:unscaled" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi:unscaled" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/PEX" -# Additional fonts: Locale, Gimp, TTF... - FontPath "/usr/share/fonts/cyrillic" -# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" -# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" -# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! - FontPath "/usr/share/fonts/Type1" - FontPath "/usr/share/fonts/ttf/western" - FontPath "/usr/share/fonts/ttf/decoratives" - FontPath "/usr/share/fonts/truetype" - FontPath "/usr/share/fonts/truetype/openoffice" - FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" - FontPath "/usr/share/fonts/latex-ttf-fonts" - FontPath "/usr/share/fonts/defoma/CID" - FontPath "/usr/share/fonts/defoma/TrueType" -EndSection - -Section "Module" - Load "ddc" # ddc probing of monitor - Load "dbe" - Load "dri" - Load "extmod" - Load "glx" - Load "bitmap" # bitmap-fonts - Load "type1" - Load "freetype" - Load "record" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" - Option "CoreKeyboard" - Option "XkbRules" "xorg" - Option "XkbModel" "pc105" - Option "XkbLayout" "" - Option "XkbVariant" "" -EndSection - -Section "InputDevice" - Identifier "Serial Mouse" - Driver "mouse" - Option "Protocol" "Microsoft" - Option "Device" "/dev/ttyS0" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "PS/2 Mouse" - Driver "mouse" - Option "Protocol" "auto" - Option "ZAxisMapping" "4 5" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "USB Mouse" - Driver "mouse" - Option "Device" "/dev/input/mice" - Option "SendCoreEvents" "true" - Option "Protocol" "IMPS/2" - Option "ZAxisMapping" "4 5" - Option "Buttons" "5" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Monitor" - Identifier "Monitor0" - Option "DPMS" "true" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Device" - Identifier "Card0" - Driver "intel" - VendorName "All" - BoardName "All" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 16 - SubSection "Display" - Depth 1 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 4 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 8 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 15 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 16 - Modes "800x600" - virtual 800 600 - EndSubSection - SubSection "Display" - Depth 24 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 32 - Modes "1024x768" "800x600" "640x480" - EndSubSection -EndSection - -Section "DRI" - Mode 0666 -EndSection diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.nvidia b/abs/core/live-installer/templates/xorg/xorg.conf.nvidia deleted file mode 100755 index dec0f42..0000000 --- a/abs/core/live-installer/templates/xorg/xorg.conf.nvidia +++ /dev/null @@ -1,90 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" -# HorizSync -# VertRefresh - Option "DPMS" "false" - DisplaySize 203 153 - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -#INSERT MODELINE -EndSection - -Section "Device" - Identifier "Device0" - Driver "nvidia" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - Option "NoLogo" "1" - -#INSERT HERE - -#END OPTIONS - -# Option "ConnectedMonitor" "DFP" -# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled" -# Option "DigitalVibrance" "0" -# Option "TransparentIndex" "0" -# Option "CursorShadowAlpha" "64" -# Option "CursorShadowXOffset" "4" -# Option "UseEdidFreqs" "True" -# Option "NvAGP" "1" - - - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.via b/abs/core/live-installer/templates/xorg/xorg.conf.via deleted file mode 100644 index 6dd7821..0000000 --- a/abs/core/live-installer/templates/xorg/xorg.conf.via +++ /dev/null @@ -1,77 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "glx" - Load "extmod" - Load "type1" - Load "freetype" - Load "dri" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "via" - VendorName "via" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Depth 16 - Modes "800x600" - EndSubSection -EndSection - -Section "DRI" - Group "video" - Mode 0666 - EndSection diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.vmware b/abs/core/live-installer/templates/xorg/xorg.conf.vmware deleted file mode 100755 index 843f2f4..0000000 --- a/abs/core/live-installer/templates/xorg/xorg.conf.vmware +++ /dev/null @@ -1,72 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "vmware" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core/live-installer/timezip.py b/abs/core/live-installer/timezip.py deleted file mode 100755 index 505b4a4..0000000 --- a/abs/core/live-installer/timezip.py +++ /dev/null @@ -1,185 +0,0 @@ -#!/usr/bin/python -# import MySQL module -#used to import the zipcode/timezone/nfs info fromMBE -import MySQLdb -import sys -import getopt -import socket - - -def usage(): - print " -h --help" - print " -d --installdb" - print " -m --masterdb" - print " -n --hostname of current machine" - -def printvars(): - print "masterdb: " + masterdb - print "installdb:" + installdb - print "hostname: " + thishostname - print "BEhostname:" + BEhostname - print "zipcode:" + zipcode - print "timezone:" + tz - print "nfsip:" + nfsip - print "nfstoggle:" + nfstoggle - print "nfsmount:" + nfsmount - print "hobbitclient:" + hobbitclient -# connect -def selectvars(): - - global BEhostname - global zipcode - global tz - global nfsip - global nfstoggle - global nfsmount - global hobbitclient - - db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg") - # create a cursor - cursor = db.cursor() - # execute SQL statement - cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb)) - result = cursor.fetchone() - BEhostname=result[0] - - cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - zipcode = result[0] - except TypeError: - zipcode="" - - cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfsip=result[0] - except TypeError: - nfsip="" - - cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfstoggle=result[0] - except TypeError: - nfstoggle="" - - cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfsmount=result[0] - except TypeError: - nfsmount="" - - cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - tz=result[0] - except TypeError: - tz="" - - if ( thishostname != BEhostname ): - cursor.execute("select data from settings where value='GlobalServiceHobbitserver'") - result = cursor.fetchone() - try: - hobbitclient=result[0] - except TypeError: - hobbitclient="0" - - - -def insertvars(): - - db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg") - cursor = db.cursor() -#inserting the zipcode - cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( zipcode!="" ): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname)) - print "inserting zipcode" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname)) - print "updating zipcode" - -#inserting the timezone - cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( tz != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname)) - print "inserting timezone" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname)) - print "updating timezone" - - -#start of NFSIP - cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( nfsip != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname)) - print "inserting nfsip" - - if (nfstoggle != ""): - cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname)) - print "inserting nfstoggle" - - if ( nfsmount !="") : - cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname)) - print "inserting nfsmountpoint" - -#hobbitclient - cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( tz != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname)) - print "inserting hobbitcleint" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname)) - print "updating hobbitclient" - - -def main(argv): - global masterdb - global installdb - global thishostname - thishostname="" - global BEhostname - global zipcode - global tz - global nfsip - global hobbitclient - try: - opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] ) - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - usage() - sys.exit() - elif opt in ( "-d" , "--installdb"): - installdb = arg - elif opt in ("-m", "--masterdb"): - masterdb = arg - elif opt in ("-n", "--hostname"): - thishostname = arg - - if ( thishostname == "" ): - thishostname = socket.gethostname() - - selectvars() - printvars() - insertvars() -if __name__ == "__main__": - main(sys.argv[1:]) - diff --git a/abs/core/live-installer/xconfig.sh b/abs/core/live-installer/xconfig.sh deleted file mode 100755 index 42603d6..0000000 --- a/abs/core/live-installer/xconfig.sh +++ /dev/null @@ -1,233 +0,0 @@ -#!/bin/bash -BASE="" -. /etc/profile -#TEMPLATES="/usr/share/templates" - -function Xvalues { - VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2` - echo $VGACARDTYPE - currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '` - } - -function presetupX { -if [ x$XUseAdvanced = x1 ] -then - if [ x$XIgnoreConfig = x1 ] - then - echo "Using User supplied X" - if [ -f $BASE/data/home/mythtv/templates/xorg.user ] - then - cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF - else - echo "Didn't find the file" - echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF - fi - else - setupAdvancedX - fi -else - setupX -fi - -} - -function setupAdvancedX { -echo "#doing the advanced" > /tmp/options - Xcatagory=` echo $Xresadvanced |cut -d_ -f1` - Xres=` echo $Xresadvanced |cut -d_ -f2` - echo $Xcatagory - if [ x$Xcatagory = "xNvidia" ] - then - Xres="" - if [ $XnVidia1080p = "1" ] - then - Xres="${Xres} \"1920x1080_60\"" - fi - if [ $XnVidia1080i = "1" ] - then - Xres="${Xres} \"1920x1080_60i\"" - fi - if [ $XnVidia720p = "1" ] - then - Xres="${Xres} \"1280x720_60\"" - fi - if [ $XnVidia480p = "1" ] - then - Xres="${Xres} \"720x480_60\"" - fi - ML="\t Modes ${Xres}" - else - - ML="\t Modes \"${Xres}\"" - fi - echo $ML - case $Xcardtype in - NVIDIA|nVidia ) - - case $Xconnection in - DVI) ConnectedMonitor=DFP ;; - vga) ConnectedMonitor=CRT;; - Auto) ConnectedMonitor=Auto;; - TV) ConnectedMonitor=TV - echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options - echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options - ;; - esac - if [ $ConnectedMonitor = Auto ] - then - echo "auto connection" - else - echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options - echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options - echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options - fi - - if [ x$XignoreEDID = x1 ] - then - EDIDvalue=true - EDIDFREQ=false - DS=" DisplaySize $XDisplaysize" - HS=" HorizSync $XHsync" - VR=" VertRefresh $XVrefresh" - else - EDIDvalue=false - EDIDFREQ=true - DS="# Display size edid used " - HS="#Hsync edid used " - VR="#Vertrefresh edid used " - - fi - echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options - echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options - - - sed -e "s/^.*Modes.*$/${ML}/" \ - -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ - -e "s/^.*DisplaySize.*$/ $DS/" \ - -e "s/^#.*HorizSync.*$/ $HS/g" \ - -e "s/^#.*VertRefresh.*$/ $VR/g" \ - -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF - - ;; - ati|ATI) - case $Xconnection in - DVI) ConnectedMonitor="tmds1,nocrt1,notv";; - VGA) ConnectedMonitor="crt1,notmds1,notv" ;; - TV) ConnectedMonitor="tv,nocrt1,notmds1" - echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options - echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options - ;; - - esac - - - if [ x$XignoreEDID = x1 ] - then - DS=" DisplaySize $XDisplaysize" - HS=" HorizSync $XHsync" - VR=" VertRefresh $XVrefresh" - else - DS="# Display size edid used " - HS="#Hsync edid used " - VR="#Vertrefresh edid used " - - fi - - echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options - - sed -e "s/^.*Modes.*$/\t $ML/" \ - -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ - -e "s/^.*DisplaySize.*$/ $DS/" \ - -e "s/^#.*HorizSync.*$/ $HS/g" \ - -e "s/^#.*VertRefresh.*$/ $VR/g" \ - -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF - ;; - - via|VIA|Via) echo "no via here" - ;; - - *) - echo "unknown card type" - ;; - esac -} - - - -function setupX { - Xvalues - echo "$currentmode ____ ${Xres}" - #if [ ! x${currentmode} = x\"${Xres}\" ] - if [ x = x ] - then - case $VGACARDTYPE in - nVidia ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -R libgl-dri -# pacman --noconfirm -S nvidia-STB nvidia-utils - pacman --noconfirm -S nvidia nvidia-utils - fi - ;; - VMware ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF - ;; - - VIA ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -R nvidia-STB nvidia-utils - pacman --noconfirm -S libgl-dri - fi - - ;; - Intel) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -Rd nvidia-utils - pacman --noconfirm -S libgl-dri - fi - ;; - - *) #XCONF=`hwd -x |grep etc` - XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-` - - - cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF - ;; - esac - fi - -} - -#MAIN -TESTMODE=$1 -if [ x$TESTMODE = "xtest" ] -then - XORG_CONF="/tmp/xorg.conf.test" - XUseAdvanced="1" - XIgnoreConfig="${2}" - Xcardtype="${3}" - XIgnoreEDID="${4}" - Xconnection="${5}" - XHsync="${6}" - XVrefresh="${7}" - Xresadvanced="${8}" - XTVstandard="${9}" - XTVconnection="${10}" - XDisplaysize="${11}" -else - if [ -f /etc/systemconfig ] - then - . /etc/systemconfig - else - Xres="800x600" - fi - XORG_CONF="/etc/X11/xorg.conf" -fi -presetupX - - |
