diff options
Diffstat (limited to 'abs')
| -rw-r--r-- | abs/core/LinHES-config/PKGBUILD | 4 | ||||
| -rwxr-xr-x | abs/core/LinHES-config/xconfig.sh | 130 | ||||
| -rw-r--r-- | abs/core/mythinstall/PKGBUILD | 2 | ||||
| -rwxr-xr-x | abs/core/runit-scripts/PKGBUILD | 2 | ||||
| -rwxr-xr-x | abs/core/runit-scripts/runitscripts/services/lircd/run | 8 | ||||
| -rwxr-xr-x | abs/core/system-templates/PKGBUILD | 2 | ||||
| -rw-r--r-- | abs/core/system-templates/templates/LCD/nmedia/LCDd.conf | 869 |
7 files changed, 956 insertions, 61 deletions
diff --git a/abs/core/LinHES-config/PKGBUILD b/abs/core/LinHES-config/PKGBUILD index ddfc5a4..a6d8d54 100644 --- a/abs/core/LinHES-config/PKGBUILD +++ b/abs/core/LinHES-config/PKGBUILD @@ -1,6 +1,6 @@ pkgname=LinHES-config pkgver=2.3 -pkgrel=41 +pkgrel=43 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev LinHes-config ) pkgdesc="Install and configure your system" depends=('bc' 'libstatgrab' 'mysql-python' 'expect' 'curl' 'dnsutils' 'parted' @@ -110,7 +110,7 @@ md5sums=('6259677916192a92d1adf47b276f7829' 'c20f73d4da5d7e15e1f3eb85c7dcb49a' '8ac1cfd2eca0f641737da0d0aca416a7' '9ae8d79f620c6d19973c55c32a921874' - '7af56cecd1081d45f57fb207df0a0c87' + '960017a34d9cc78af6298f45aad6eb8e' 'ecf9e5df20683a769c4a8a8f2d65de85' 'eaf845dda830c531649d5840e0584f8e' '97de45a04f4efbd9d40d9fc0e1db1c3f' diff --git a/abs/core/LinHES-config/xconfig.sh b/abs/core/LinHES-config/xconfig.sh index 4237fcc..a601352 100755 --- a/abs/core/LinHES-config/xconfig.sh +++ b/abs/core/LinHES-config/xconfig.sh @@ -54,47 +54,51 @@ function presetupX { echo "Copy your config file to $MYTHHOME/templates/xorg.user" > "$XORG_CONF" fi else - if [ "$XUseAdvanced" = 1 ] - then - setupAdvancedX - else + #if [ "$XUseAdvanced" = 1 ] + #then + # setupAdvancedX + #else setupX - fi + #fi fi fi } function setupAdvancedX { - echo "#Doing the advanced X setup" > /tmp/options + + echo "#Doing the advanced X setup" >> $LOGFILE + #Xcategory=`echo "$Xresadvanced" | cut -d_ -f1` + #Xres=`echo "$Xresadvanced" | cut -d_ -f2` + Xcategory=`echo "$Xresadvanced" | cut -d_ -f1` - Xres=`echo "$Xresadvanced" | cut -d_ -f2` - echo "$Xcategory" - if [ "$Xcategory" = "nVidia Modeline" ] + Xres=${Xres} + #echo "$Xcategory" + #echo $Xres + if [ "$Xcategory" = "Nvidia" ] then - Xres="" + #Xres="" if [ "$XnVidia1080p" = "1" ] then - Xres="${Xres} \"1920x1080_60\"" + Xres="${Xres} 1920x1080_60" fi if [ "$XnVidia1080i" = "1" ] then - Xres="${Xres} \"1920x1080_60i\"" + Xres="${Xres} 1920x1080_60i" fi if [ "$XnVidia720p" = "1" ] then - Xres="${Xres} \"1280x720_60\"" + Xres="${Xres} 1280x720_60" fi if [ "$XnVidia480p" = "1" ] then - Xres="${Xres} \"720x480_60\"" + Xres="${Xres} 720x480_60" fi - ML="\t Modes ${Xres}" - else - - ML="\t Modes \"${Xres}\"" + #ML="\t Modes ${Xres}" +# else +# ML="\t Modes \"${Xres}\"" fi -# echo $ML + case $Xcardtype in NVIDIA|nVidia|nvidia) nvidia_driver_install @@ -119,21 +123,21 @@ function setupAdvancedX { #echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options #echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options fi - - if [ "$XignoreEDID" = 1 ] - then - EDIDvalue=true - EDIDFREQ=false - DS=" DisplaySize $XDisplaysize" - HS=" HorizSync $XHsync" - VR=" VertRefresh $XVrefresh" - else - EDIDvalue=false - EDIDFREQ=true - DS="# Display size edid used " - HS="# Hsync edid used " - VR="# Vertrefresh edid used " - fi +# +# if [ "$XignoreEDID" = 1 ] +# then +# EDIDvalue=true +# EDIDFREQ=false +# DS=" DisplaySize $XDisplaysize" +# HS=" HorizSync $XHsync" +# VR=" VertRefresh $XVrefresh" +# else +# EDIDvalue=false +# EDIDFREQ=true +# DS="# Display size edid used " +# HS="# Hsync edid used " +# VR="# Vertrefresh edid used " +# fi # echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options # echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options # @@ -144,6 +148,9 @@ function setupAdvancedX { # -e "s/^#.*HorizSync.*$/ $HS/g" \ # -e "s/^#.*VertRefresh.*$/ $VR/g" \ # -e "/INSERT HERE/r /tmp/options" "$TEMPLATES/xorg/xorg.conf.nvidia" > "$XORG_CONF" + + #nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list=\"${Xres}\" + eval nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list=\"${Xres}\" ;; ati|ATI) @@ -203,7 +210,7 @@ function nvidia_driver_install { cp "$TEMPLATES/xorg/xorg.conf.nvidia" $BASE/etc/X11/xorg.conf.d/20-automv.conf - + installed=0 if [ "$TESTMODE" != "test" ] then @@ -215,37 +222,62 @@ function nvidia_driver_install { echo "Installing current nvidia drivers" nvidia_prepare pacman --noconfirm -S nvidia nvidia-utils >> $LOGFILE 2>&1 + installed=1 fi + if [ $installed = 0 ] + then + #nvidia check right here + grep -qi "$CARDID" "$NVIDIA_96XX" + if [ $? = 0 ] + then + #install 96xx drivers + echo "Installing nvidia 96xx drivers" + nvidia_prepare + pacman --noconfirm -S nvidia-96xx nvidia-96xx-utils >> $LOGFILE 2>&1 + installed=1 + fi + fi - #nvidia check right here - grep -qi "$CARDID" "$NVIDIA_96XX" - if [ $? = 0 ] + if [ $installed = 0 ] then - #install 96xx drivers - echo "Installing nvidia 96xx drivers" - nvidia_prepare - pacman --noconfirm -S nvidia-96xx nvidia-96xx-utils >> $LOGFILE 2>&1 + grep -qi "$CARDID" "$NVIDIA_173" + if [ $? = 0 ] + then + #install latest drivers + echo "Installing 173 nvidia drivers" + nvidia_prepare + pacman --noconfirm -S nvidia-173xx nvidia-173xx-utils >> $LOGFILE 2>&1 + installed=1 + fi fi - grep -qi "$CARDID" "$NVIDIA_173" - if [ $? = 0 ] + if [ $installed = 0 ] then + #this is a failsafe, can't find the right driver, then use the latest' #install latest drivers - echo "Installing 173 nvidia drivers" + echo "Couldn't find the card in the supported list" + echo "Installing current nvidia drivers" + nvidia_prepare - pacman --noconfirm -S nvidia-173xx nvidia-173xx-utils >> $LOGFILE 2>&1 + pacman --noconfirm -S nvidia nvidia-utils >> $LOGFILE 2>&1 + installed=1 fi + + fi - if [ ${Xres} = Auto ] + + + if [ \"$Xres\" = "Auto" ] then nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list="nvidia-auto-select" else - nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list=${Xres} + #nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list=$Xres + eval nvidia-xconfig -c /etc/X11/xorg.conf.d/20-automv.conf --mode-list=\"${Xres}\" fi echo "/usr/lib/libXvMCNVIDIA_dynamic.so.1" > "$XVMC_CONFIG" - rm $BASE/etc/X11/xorg.conf.d/20-nvidia.conf + #rm $BASE/etc/X11/xorg.conf.d/20-nvidia.conf } diff --git a/abs/core/mythinstall/PKGBUILD b/abs/core/mythinstall/PKGBUILD index 7a10d19..92ba4bb 100644 --- a/abs/core/mythinstall/PKGBUILD +++ b/abs/core/mythinstall/PKGBUILD @@ -1,7 +1,7 @@ # Maintainer: Jams pkgname=mythinstall pkgver=3 -pkgrel=13 +pkgrel=15 pkgdesc="LinHES installer/systemconfig GUI." arch=i686 depends=() diff --git a/abs/core/runit-scripts/PKGBUILD b/abs/core/runit-scripts/PKGBUILD index bae19e3..df07eed 100755 --- a/abs/core/runit-scripts/PKGBUILD +++ b/abs/core/runit-scripts/PKGBUILD @@ -1,6 +1,6 @@ pkgname=runit-scripts pkgver=2.1.1 -pkgrel=37 +pkgrel=38 pkgdesc="collection of startup scripts for runit" url="http://smarden.org/runit/" license="BSD" diff --git a/abs/core/runit-scripts/runitscripts/services/lircd/run b/abs/core/runit-scripts/runitscripts/services/lircd/run index b23e348..480a884 100755 --- a/abs/core/runit-scripts/runitscripts/services/lircd/run +++ b/abs/core/runit-scripts/runitscripts/services/lircd/run @@ -37,13 +37,7 @@ else . /etc/systemconfig stat_runit "Starting lirc" - - in_kernel_support "disable" - - - #enable lirc bridge protocol - printhl " lirc: ir-keytable" - /usr/bin/ir-keytable -p lirc > /dev/null 2>/dev/null + in_kernel_support "disable" [ -e /etc/sv/lircd/.runtime ] || mkdir -p /etc/sv/lircd/.runtime [ -e /var/run/lirc ] || mkdir -p /var/run/lirc diff --git a/abs/core/system-templates/PKGBUILD b/abs/core/system-templates/PKGBUILD index 224b93e..1cf109e 100755 --- a/abs/core/system-templates/PKGBUILD +++ b/abs/core/system-templates/PKGBUILD @@ -1,6 +1,6 @@ pkgname=system-templates pkgver=2.0 -pkgrel=7 +pkgrel=8 conflicts=( ) pkgdesc="Templates used for system configuration" depends=() diff --git a/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf b/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf new file mode 100644 index 0000000..33400b4 --- /dev/null +++ b/abs/core/system-templates/templates/LCD/nmedia/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d <driver> command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=lis +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF |