diff options
Diffstat (limited to 'abs')
138 files changed, 24463 insertions, 3 deletions
diff --git a/abs/core-testing/gtk2/PKGBUILD b/abs/core-testing/gtk2/PKGBUILD index 63199ab..f3fb952 100644 --- a/abs/core-testing/gtk2/PKGBUILD +++ b/abs/core-testing/gtk2/PKGBUILD @@ -3,7 +3,7 @@ pkgname=gtk2 pkgver=2.16.1 -pkgrel=3 +pkgrel=4 pkgdesc="The GTK+ Toolkit (v2)" arch=(i686 x86_64) url="http://www.gtk.org/" diff --git a/abs/core-testing/system-templates/PKGBUILD b/abs/core-testing/system-templates/PKGBUILD index 904db3c..5add985 100755 --- a/abs/core-testing/system-templates/PKGBUILD +++ b/abs/core-testing/system-templates/PKGBUILD @@ -1,6 +1,6 @@ pkgname=system-templates pkgver=1.0 -pkgrel=29 +pkgrel=30 conflicts=( ) pkgdesc="Templates used for system configuration" depends=() diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf new file mode 100755 index 0000000..d30e172 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircd-avermedia77x.conf @@ -0,0 +1,66 @@ +# +# this config file was automatically generated +# using lirc-0.8.0(userspace) on Mon Feb 20 23:15:48 2006 +# +# contributed by Joris Patroons +# +# brand: AVerMedia +# model no. of remote control: Unknown +# devices being controlled by this remote: +# AVerTV DVB-T 771 + +begin remote + + name a771 + bits 32 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + gap 108056 + toggle_bit 0 + + + begin codes + SOURCE 0x40BF807F + TELETEXT 0x40BF40BF + POWER 0x40BF00FF + 1 0x40BFA05F + 2 0x40BF609F + 3 0x40BFE01F + 4 0x40BF906F + 5 0x40BF50AF + 6 0x40BFD02F + 7 0x40BFB04F + 8 0x40BF708F + 9 0x40BFF00F + 0 0x40BF8877 + AUDIO 0x40BF10EF + FULLSCREEN 0x40BF30CF + DISPLAY 0x40BF48B7 + LOOP 0x40BFC837 + PREVIEW 0x40BF08F7 + BACKWARD 0x40BFA857 + FORWARD 0x40BF6897 + CAPTURE 0x40BFE817 + MUTE 0x40BF28D7 + RECORD 0x40BF9867 + PAUSE 0x40BF58A7 + STOP 0x40BFD827 + PLAY 0x40BF18E7 + RED 0x40BFB847 + GREEN 0xC03F807F + YELLOW 0x40BF38C7 + BLUE 0xC03F00FF + VOL_DOWN 0x40BF7887 + VOL_UP 0x40BFF807 + CH_DOWN 0xC03F40BF + CH_UP 0xC03FC03F + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt new file mode 100755 index 0000000..2aa9e09 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/lircrc-avermedia771.txt @@ -0,0 +1,475 @@ +# Channel Up +begin +prog = mythtv +button = CH_UP +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = CH_UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL_UP +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL_DOWN +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = PAUSE +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FORWARD +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = BACKWARD +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = CAPTURE +config = R +end + +# Delete +begin +prog = mythtv +button = RED +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = PREVIEW +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = TELETEXT +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = DISPLAY +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = PREVIEW +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = TELETEXT +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = BACKWARD +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FORWARD +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULLSCREEN +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = PAUSE +config = Pause +end + +begin +prog = xine +button = +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = PREVIEW +config = Menu +end + +begin +prog = xine +button = FORWARD +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = BACKWARD +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +config = Volume+ +end + +begin +prog = xine +button = VOL_DOWN +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = TELETEXT +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_77x/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf new file mode 100755 index 0000000..bfc07b9 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircd-avermedia98.conf @@ -0,0 +1,97 @@ +# +# this config file was automatically generated +# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 +# +# contributed by Christoph Bartelmus <lirc@bartelmus.de> +# +# brand: AVerMedia +# model: ? (36 buttons) +# supported devices: TVPhone98 card (ID 0x00031461) +# TVCapture98 card (ID 0x00041461) +# +# This config file does work with both homebrew receivers and +# original AVerMedia TV cards !!! +# + +begin remote + + name TVPhone98 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0x40BF + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x000000000000807F + CD 0x00000000000040BF + TELETEXT 0x000000000000C03F + VIDEO 0x00000000000020DF + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + AUDIO 0x00000000000010EF + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + FULLSCREEN 0x00000000000030CF + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + + PREVIEW 0x00000000000008F7 + 0 0x0000000000008877 + DISPLAY 0x00000000000048B7 + LOOP 0x000000000000C837 + MUTE 0x00000000000028D7 + AUTOSCAN 0x000000000000A857 + FREEZE 0x0000000000006897 + CAPTURE 0x000000000000E817 + PLAY 0x00000000000018E7 + RECORD 0x0000000000009867 + PAUSE 0x00000000000058A7 + STOP 0x000000000000D827 + YELLOW 0x00000000000038C7 + RED 0x000000000000B847 + VOL_DOWN 0x0000000000007887 + VOL_UP 0x000000000000F807 + end codes + +end remote + +begin remote + + name TVPhone98_ext + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0xC03F + gap 108056 + repeat_bit 0 + + begin codes + BLUE 0x00000000000000FF + GREEN 0x000000000000807F + CH_DOWN 0x00000000000040BF + CH_UP 0x000000000000C03F + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt new file mode 100755 index 0000000..f8fb43a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/lircrc-avermedia98.txt @@ -0,0 +1,477 @@ +# Channel Up +begin +prog = mythtv +button = CH_UP +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# General Left +begin +prog = mythtv +button = LEFT +config = Left +end + +# General Right +begin +prog = mythtv +button = RIGHT +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = CH_UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL_UP +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL_DOWN +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = UNLABELED +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = PAUSE +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +remote = TVPhone98_ext +prog = mythtv +button = BLUE +config = Left +end + +# Skip forward (10 min default) +begin +remote = TVPhone98_ext +prog = mythtv +button = GREEN +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = CAPTURE +config = R +end + +# Delete +begin +prog = mythtv +button = RED +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = YELLOW +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = TELETEXT +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = DISPLAY +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = VIDEO +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = TELETEXT +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULLSCREEN +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = PAUSE +config = Pause +end + +begin +prog = xine +button = +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = PREVIEW +config = Menu +end + +begin +prog = xine +button = +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +config = Volume+ +end + +begin +prog = xine +button = VOL_DOWN +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = TELETEXT +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avermedia_98/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avermedia_98/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf new file mode 100755 index 0000000..391c8d4 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircd-avertvusb.conf @@ -0,0 +1,65 @@ +#
+# this config file was created by using lirc-0.8 on Thu Sept 14 2006
+#
+# contributed by elturisto
+#
+# brand: AVerMedia
+# model no. of remote control: RM-FP
+# devices being controlled by this remote: AVerMedia DVB-T USB2.0 (A800)
+#
+
+begin remote
+
+ name rmfp
+ bits 32
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 8967 4524
+ one 565 1682
+ zero 565 559
+ ptrail 561
+ repeat 8968 2276
+ gap 107905
+ toggle_bit 0
+
+
+ begin codes
+ power 0x00010074
+ source 0x00010094
+ 1 0x00010002
+ 2 0x00010003
+ 3 0x00010004
+ 4 0x00010005
+ 5 0x00010006
+ 6 0x00010007
+ 7 0x00010008
+ 8 0x00010009
+ 9 0x0001000a
+ 0 0x0001000b
+ display 0x00010095
+ snapshot 0x00010069
+ chrtn 0x0001006a
+ chprev 0x000100ca
+ chup 0x00010192
+ chdown 0x00010193
+ voldown 0x00010072
+ volup 0x00010073
+ fullscreen 0x00010174
+ mute 0x00010071
+ audio 0x00010188
+ record 0x000100a7
+ play 0x000100cf
+ stop 0x00010080
+ pause 0x000100a4
+ rewind 0x0001009e
+ forward 0x0001009f
+ teletext 0x00010184
+ last 0x00010194
+ next 0x00010195
+ epg 0x0001016d
+ menu 0x0001008b
+ end codes
+
+end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt new file mode 100755 index 0000000..dc28857 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/lircrc-avertvusb.txt @@ -0,0 +1,482 @@ +# Channel Up +begin +prog = mythtv +button = chup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chdown +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = chup +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = chdown +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = voldown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = next +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = last +config = PgUp +end + +# Record +begin +prog = mythtv +button = record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = epg +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = menu +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = display +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = chprev +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = teletext +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = snapshot +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = forward +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = rewind +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = next +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = last +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = display +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = chup +config = EventUp +end + +begin +prog = xine +button = chdown +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volup +config = Volume+ +end + +begin +prog = xine +button = voldown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = next +config = EventNext +end + +begin +prog = xine +button = last +config = EventPrior +end + +begin +prog = xine +button = display +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Avertv_USB/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Avertv_USB/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf b/abs/core-testing/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf new file mode 100755 index 0000000..8b0bd3c --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy/lircd-cinergy400600.conf @@ -0,0 +1,67 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0 (devinput) on Sun Feb 27 18:29:35 2005 +# +# +# brand: Terratec_Cinergy_Remote +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + +name Terratec_Cinergy_Remote +bits 16 +eps 30 +aeps 100 +one 0 0 +zero 0 0 +pre_data_bits 16 +pre_data 0x8001 +gap 237493 +toggle_bit 0 + + + begin codes + power 0x0000000000000074 + app 0x0000000000000094 + zoom 0x0000000000000174 + 1 0x000000000000004F + 2 0x0000000000000050 + 3 0x0000000000000051 + 4 0x000000000000004B + 5 0x000000000000004C + 6 0x000000000000004D + 7 0x0000000000000047 + 8 0x0000000000000048 + 9 0x0000000000000049 + 0 0x0000000000000052 + chup 0x0000000000000192 + chdown 0x0000000000000193 + volup 0x0000000000000073 + voldown 0x0000000000000072 + av 0x0000000000000182 + -/-- 0x0000000000000045 + audio 0x0000000000000188 + mute 0x0000000000000071 + left 0x0000000000000069 + right 0x000000000000006A + up 0 x0000000000000067 + down 0x000000000000006C + mouseleft 0x0000000000000110 + mouseright 0x0000000000000111 + text 0x0000000000000096 + rew 0x00000000000000A8 + fwd 0x000000000000009F + rec 0x00000000000000A7 + play 0x00000000000000CF + prev 0x00000000000000A5 + next 0x00000000000000A3 + pause 0x0000000000000077 + stop 0x0000000000000080 + +end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt b/abs/core-testing/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt new file mode 100755 index 0000000..5ac2227 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy/lircrc-cinergy400600.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = chup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chdown +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = voldown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = fwd +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rew +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = next +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = prev +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = app +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = app +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rew +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = fwd +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = next +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = prev +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = app +config = Menu +end + +begin +prog = xine +button = next +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = prev +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volup +config = Volume+ +end + +begin +prog = xine +button = voldown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = next +config = EventNext +end + +begin +prog = xine +button = prev +config = EventPrior +end + +begin +prog = xine +button = av +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Cinergy/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf new file mode 100755 index 0000000..8458cfe --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircd-cinergy1400.conf @@ -0,0 +1,71 @@ +# +# this config file was automatically generated +# using lirc-0.7.2(serial) on Fri Oct 14 16:29:58 2005 +# +# contributed by Sebastian Kraft +# +# brand: Terratec +# model no. of remote control: Cinergy 1400-T +# devices being controlled by this remote: +# + +begin remote + + name Terratec_Cinergy_1400-T + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9007 4495 + one 557 1683 + zero 557 555 + ptrail 546 + pre_data_bits 16 + pre_data 0x20D7 + gap 110968 + toggle_bit 0 + + + begin codes + 0 0x30CF + 1 0x40BF + 2 0xC03F + 3 0x20DF + 4 0xA05F + 5 0x609F + 6 0xE01F + 7 0x10EF + 8 0x906F + 9 0x50AF + fullscreen 0x18E7 + osd 0x708F + volumeup 0x38C7 + volumedown 0x7887 + channelup 0xD827 + channeldown 0xF807 + epg 0xF00F + av 0xD02F + power 0x807F + teletext 0xA857 + clock 0xE817 + mute 0xB847 + pause 0x02FD + play 0x32CD + record 0x1AE5 + rewind 0x2AD5 + stop 0x12ED + forward 0x3AC5 + up 0x08F7 + down 0x28D7 + left 0x8877 + right 0xC837 + info 0x6897 + ok 0x48B7 + tab 0x58A7 + audio 0x9867 + clock 0xE817 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt new file mode 100755 index 0000000..8dd42c5 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/lircrc-cinergy1400.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = channelup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = channeldown +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volumeup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = volumedown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = osd +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = epg +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = tab +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = teletext +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = osd +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = forward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = epg +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volumeup +config = Volume+ +end + +begin +prog = xine +button = volumedown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = channelup +config = EventNext +end + +begin +prog = xine +button = channeldown +config = EventPrior +end + +begin +prog = xine +button = info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_1400/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf new file mode 100755 index 0000000..168743b --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircd-cinergyT2.conf @@ -0,0 +1,72 @@ +# +# this config file was generated +# using lirc-0.7.1pre2(serial) kantonix VDR +# +# contributed by Stefan Bernshausen +# +# brand: Terratec +# model no. of remote control: Cinergy T2 +# devices being controlled by this remote: +# + +begin remote + + name Terratec_Cinergy_T2 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9007 4495 + one 557 1683 + zero 557 555 + ptrail 546 + pre_data_bits 16 + pre_data 0x20D7 + gap 110968 + toggle_bit 0 + + + begin codes + 0 0x30CF + 1 0x40BF + 2 0xC03F + 3 0x20DF + 4 0xA05F + 5 0x609F + 6 0xE01F + 7 0x10EF + 8 0x906F + 9 0x50AF + Green 0x18E7 + Osd 0x708F + Volume+ 0x38C7 + Volume- 0x7887 + Ch+ 0xD827 + Ch- 0xF807 + Epg 0xF00F + Av 0xD02F + Power 0x807F + Txt 0xA857 + Red 0xE817 + Mute 0xB847 + Pause 0x02FD + Play 0x32CD + Record 0x1AE5 + Fback 0x2AD5 + Stop 0x12ED + Ffor 0x3AC5 + Up 0x08F7 + Down 0x28D7 + Left 0x8877 + Right 0xC837 + Info 0x6897 + Ok 0x48B7 + Blue 0x58A7 + Yellow 0x9867 + Red 0xE817 + Back 0xB04F + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt new file mode 100755 index 0000000..c4042fe --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/lircrc-cinergyT2.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = Ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = Left +config = Left +end + +# General Right +begin +prog = mythtv +button = Right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = Volume+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = Volume- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = Ok +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = Ffor +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Fback +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = Red +config = D +end + +# OSD browse +begin +prog = mythtv +button = Osd +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Epg +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = Green +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = Blue +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Osd +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Fback +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = Ffor +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Ch+ +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Ch- +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = Blue +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Stop +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = Up +config = EventUp +end + +begin +prog = xine +button = Down +config = EventDown +end + +begin +prog = xine +button = Left +config = EventLeft +end + +begin +prog = xine +button = Right +config = EventRight +end + +begin +prog = xine +button = Ok +config = EventSelect +end + +begin +prog = xine +button = Epg +config = Menu +end + +begin +prog = xine +button = Ffor +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Fback +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = Volume+ +config = Volume+ +end + +begin +prog = xine +button = Volume- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = Ch+ +config = EventNext +end + +begin +prog = xine +button = Ch- +config = EventPrior +end + +begin +prog = xine +button = Info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Cinergy_T2/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Compro/lircd-compro.conf b/abs/core-testing/system-templates/templates/remotes/Compro/lircd-compro.conf new file mode 100755 index 0000000..41f2c7b --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Compro/lircd-compro.conf @@ -0,0 +1,364 @@ +begin remote + name linux-input-layer + bits 32 + begin codes + ESC 0x10001 + 1 0x10002 + 2 0x10003 + 3 0x10004 + 4 0x10005 + 5 0x10006 + 6 0x10007 + 7 0x10008 + 8 0x10009 + 9 0x1000a + 0 0x1000b + MINUS 0x1000c + EQUAL 0x1000d + BACKSPACE 0x1000e + TAB 0x1000f + Q 0x10010 + W 0x10011 + E 0x10012 + R 0x10013 + T 0x10014 + Y 0x10015 + U 0x10016 + I 0x10017 + O 0x10018 + P 0x10019 + LEFTBRACE 0x1001a + RIGHTBRACE 0x1001b + ENTER 0x1001c + LEFTCTRL 0x1001d + A 0x1001e + S 0x1001f + D 0x10020 + F 0x10021 + G 0x10022 + H 0x10023 + J 0x10024 + K 0x10025 + L 0x10026 + SEMICOLON 0x10027 + APOSTROPHE 0x10028 + GRAVE 0x10029 + LEFTSHIFT 0x1002a + BACKSLASH 0x1002b + Z 0x1002c + X 0x1002d + C 0x1002e + V 0x1002f + B 0x10030 + N 0x10031 + M 0x10032 + COMMA 0x10033 + DOT 0x10034 + SLASH 0x10035 + RIGHTSHIFT 0x10036 + KPASTERISK 0x10037 + LEFTALT 0x10038 + SPACE 0x10039 + CAPSLOCK 0x1003a + F1 0x1003b + F2 0x1003c + F3 0x1003d + F4 0x1003e + F5 0x1003f + F6 0x10040 + F7 0x10041 + F8 0x10042 + F9 0x10043 + F10 0x10044 + NUMLOCK 0x10045 + SCROLLLOCK 0x10046 + KP7 0x10047 + KP8 0x10048 + KP9 0x10049 + KPMINUS 0x1004a + KP4 0x1004b + KP5 0x1004c + KP6 0x1004d + KPPLUS 0x1004e + KP1 0x1004f + KP2 0x10050 + KP3 0x10051 + KP0 0x10052 + KPDOT 0x10053 + 103RD 0x10054 + F13 0x10055 + 102ND 0x10056 + F11 0x10057 + F12 0x10058 + F14 0x10059 + F15 0x1005a + F16 0x1005b + F17 0x1005c + F18 0x1005d + F19 0x1005e + F20 0x1005f + KPENTER 0x10060 + RIGHTCTRL 0x10061 + KPSLASH 0x10062 + SYSRQ 0x10063 + RIGHTALT 0x10064 + LINEFEED 0x10065 + HOME 0x10066 + UP 0x10067 + PAGEUP 0x10068 + LEFT 0x10069 + RIGHT 0x1006a + END 0x1006b + DOWN 0x1006c + PAGEDOWN 0x1006d + INSERT 0x1006e + DELETE 0x1006f + MACRO 0x10070 + MUTE 0x10071 + VOLUMEDOWN 0x10072 + VOLUMEUP 0x10073 + POWER 0x10074 + KPEQUAL 0x10075 + KPPLUSMINUS 0x10076 + PAUSE 0x10077 + F21 0x10078 + F22 0x10079 + F23 0x1007a + F24 0x1007b + KPCOMMA 0x1007c + LEFTMETA 0x1007d + RIGHTMETA 0x1007e + COMPOSE 0x1007f + STOP 0x10080 + AGAIN 0x10081 + PROPS 0x10082 + UNDO 0x10083 + FRONT 0x10084 + COPY 0x10085 + OPEN 0x10086 + PASTE 0x10087 + FIND 0x10088 + CUT 0x10089 + HELP 0x1008a + MENU 0x1008b + CALC 0x1008c + SETUP 0x1008d + SLEEP 0x1008e + WAKEUP 0x1008f + FILE 0x10090 + SENDFILE 0x10091 + DELETEFILE 0x10092 + XFER 0x10093 + PROG1 0x10094 + PROG2 0x10095 + WWW 0x10096 + MSDOS 0x10097 + COFFEE 0x10098 + DIRECTION 0x10099 + CYCLEWINDOWS 0x1009a + MAIL 0x1009b + BOOKMARKS 0x1009c + COMPUTER 0x1009d + BACK 0x1009e + FORWARD 0x1009f + CLOSECD 0x100a0 + EJECTCD 0x100a1 + EJECTCLOSECD 0x100a2 + NEXTSONG 0x100a3 + PLAYPAUSE 0x100a4 + PREVIOUSSONG 0x100a5 + STOPCD 0x100a6 + RECORD 0x100a7 + REWIND 0x100a8 + PHONE 0x100a9 + ISO 0x100aa + CONFIG 0x100ab + HOMEPAGE 0x100ac + REFRESH 0x100ad + EXIT 0x100ae + MOVE 0x100af + EDIT 0x100b0 + SCROLLUP 0x100b1 + SCROLLDOWN 0x100b2 + KPLEFTPAREN 0x100b3 + KPRIGHTPAREN 0x100b4 + INTL1 0x100b5 + INTL2 0x100b6 + INTL3 0x100b7 + INTL4 0x100b8 + INTL5 0x100b9 + INTL6 0x100ba + INTL7 0x100bb + INTL8 0x100bc + INTL9 0x100bd + LANG1 0x100be + LANG2 0x100bf + LANG3 0x100c0 + LANG4 0x100c1 + LANG5 0x100c2 + LANG6 0x100c3 + LANG7 0x100c4 + LANG8 0x100c5 + LANG9 0x100c6 + PLAYCD 0x100c8 + PAUSECD 0x100c9 + PROG3 0x100ca + PROG4 0x100cb + SUSPEND 0x100cd + CLOSE 0x100ce + PLAY 0x100cf + FASTFORWARD 0x100d0 + BASSBOOST 0x100d1 + PRINT 0x100d2 + HP 0x100d3 + CAMERA 0x100d4 + SOUND 0x100d5 + QUESTION 0x100d6 + EMAIL 0x100d7 + CHAT 0x100d8 + SEARCH 0x100d9 + CONNECT 0x100da + FINANCE 0x100db + SPORT 0x100dc + SHOP 0x100dd + ALTERASE 0x100de + CANCEL 0x100df + BRIGHTNESSDOWN 0x100e0 + BRIGHTNESSUP 0x100e1 + MEDIA 0x100e2 + UNKNOWN 0x100f0 + BTN_MISC 0x10100 + BTN_0 0x10100 + BTN_1 0x10101 + BTN_2 0x10102 + BTN_3 0x10103 + BTN_4 0x10104 + BTN_5 0x10105 + BTN_6 0x10106 + BTN_7 0x10107 + BTN_8 0x10108 + BTN_9 0x10109 + BTN_MOUSE 0x10110 + BTN_LEFT 0x10110 + BTN_RIGHT 0x10111 + BTN_MIDDLE 0x10112 + BTN_SIDE 0x10113 + BTN_EXTRA 0x10114 + BTN_FORWARD 0x10115 + BTN_BACK 0x10116 + BTN_TASK 0x10117 + BTN_JOYSTICK 0x10120 + BTN_TRIGGER 0x10120 + BTN_THUMB 0x10121 + BTN_THUMB2 0x10122 + BTN_TOP 0x10123 + BTN_TOP2 0x10124 + BTN_PINKIE 0x10125 + BTN_BASE 0x10126 + BTN_BASE2 0x10127 + BTN_BASE3 0x10128 + BTN_BASE4 0x10129 + BTN_BASE5 0x1012a + BTN_BASE6 0x1012b + BTN_DEAD 0x1012f + BTN_GAMEPAD 0x10130 + BTN_A 0x10130 + BTN_B 0x10131 + BTN_C 0x10132 + BTN_X 0x10133 + BTN_Y 0x10134 + BTN_Z 0x10135 + BTN_TL 0x10136 + BTN_TR 0x10137 + BTN_TL2 0x10138 + BTN_TR2 0x10139 + BTN_SELECT 0x1013a + BTN_START 0x1013b + BTN_MODE 0x1013c + BTN_THUMBL 0x1013d + BTN_THUMBR 0x1013e + BTN_DIGI 0x10140 + BTN_TOOL_PEN 0x10140 + BTN_TOOL_RUBBER 0x10141 + BTN_TOOL_BRUSH 0x10142 + BTN_TOOL_PENCIL 0x10143 + BTN_TOOL_AIRBRUSH 0x10144 + BTN_TOOL_FINGER 0x10145 + BTN_TOOL_MOUSE 0x10146 + BTN_TOOL_LENS 0x10147 + BTN_TOUCH 0x1014a + BTN_STYLUS 0x1014b + BTN_STYLUS2 0x1014c + BTN_WHEEL 0x10150 + BTN_GEAR_DOWN 0x10150 + BTN_GEAR_UP 0x10151 + OK 0x10160 + SELECT 0x10161 + GOTO 0x10162 + CLEAR 0x10163 + POWER2 0x10164 + OPTION 0x10165 + INFO 0x10166 + TIME 0x10167 + VENDOR 0x10168 + ARCHIVE 0x10169 + PROGRAM 0x1016a + CHANNEL 0x1016b + FAVORITES 0x1016c + EPG 0x1016d + PVR 0x1016e + MHP 0x1016f + LANGUAGE 0x10170 + TITLE 0x10171 + SUBTITLE 0x10172 + ANGLE 0x10173 + ZOOM 0x10174 + MODE 0x10175 + KEYBOARD 0x10176 + SCREEN 0x10177 + PC 0x10178 + TV 0x10179 + TV2 0x1017a + VCR 0x1017b + VCR2 0x1017c + SAT 0x1017d + SAT2 0x1017e + CD 0x1017f + TAPE 0x10180 + RADIO 0x10181 + TUNER 0x10182 + PLAYER 0x10183 + TEXT 0x10184 + DVD 0x10185 + AUX 0x10186 + MP3 0x10187 + AUDIO 0x10188 + VIDEO 0x10189 + DIRECTORY 0x1018a + LIST 0x1018b + MEMO 0x1018c + CALENDAR 0x1018d + RED 0x1018e + GREEN 0x1018f + YELLOW 0x10190 + BLUE 0x10191 + CHANNELUP 0x10192 + CHANNELDOWN 0x10193 + FIRST 0x10194 + LAST 0x10195 + AB 0x10196 + NEXT 0x10197 + RESTART 0x10198 + SLOW 0x10199 + SHUFFLE 0x1019a + BREAK 0x1019b + PREVIOUS 0x1019c + DIGITS 0x1019d + TEEN 0x1019e + TWEN 0x1019f + DEL_EOL 0x101c0 + DEL_EOS 0x101c1 + INS_LINE 0x101c2 + DEL_LINE 0x101c3 + end codes +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Compro/lircrc-compro.txt b/abs/core-testing/system-templates/templates/remotes/Compro/lircrc-compro.txt new file mode 100755 index 0000000..3a7fae8 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Compro/lircrc-compro.txt @@ -0,0 +1,487 @@ +begin + prog = mythtv + button = UP + config = Up +end + +begin + prog = mythtv + button = DOWN + config = Down +end + +begin + prog = mythtv + button = LEFT + config = Left +end + +begin + prog = mythtv + button = RIGHT + config = Right +end + +begin + prog = mythtv + button = DVD + config = Esc +end + +begin + prog = mythtv + button = Go +# Swap the PiP windows + config = N +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = TV + config = Esc +end + +begin + prog = mythtv + button = VIDEO + config = M +end + +# Below are keys used with the Hauppauge Grey remote + +begin + prog = mythtv +# This is the Red key +# We'll use it for "Delete" + button = Red + config = D +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "Information" + button = Green + config = I +end + +# Note the "repeat =" strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +begin + prog = mythtv +# This is the Yellow key +# Use it as a volume key + button = VOLUMEDOWN + repeat = 3 + config = F10 +end + +begin + prog = mythtv +# This is the Blue key +# Use it as a volume key + button = VOLUMEUP + repeat = 3 + config = F11 +end + +begin + prog = mythtv + button = CHANNELUP +# This is the "up" on the central diamond + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = CHANNELDOWN +# This is the "down" on the central diamond + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = VOLUMEUP +# This is the "left" on the central diamond + repeat = 3 + config = Right +end + +begin + prog = mythtv + button = VOLUMEDOWN +# This is the "right" on the central diamond + repeat = 3 + config = Left +end + +begin + prog = mythtv +# Middle button on the diamond + button = OK + config = Return +end + +begin + prog = mythtv + button = MUTE + config = | +end + +begin + prog = mythtv +# Change focus for PiP (to change channel in the other window) + button = Blank + config = B +end + +begin + prog = mythtv +# Toggle PiP on/off + button = Full + config = V +end + +begin + prog = mythtv + button = REWIND + config = < +end + +begin + prog = mythtv + button = PLAY + config = P +end + +begin + prog = mythtv + button = FORWARD + config = > +end + +begin + prog = mythtv + button = RECORD + config = R +end + +begin + prog = mythtv +# Teletext + button = STOP + config = T +end + +begin + prog = mythtv + button = PLAYPAUSE + config = P +end + +begin + prog = mythtv + button = Replay +# Use for backwards commercial skip + config = Q +end + +begin + prog = mythtv + button = Skip +# Use for forward commercial skip + config = Z +end + +#MPlayer +begin + prog = mplayer + button = VIDEO + config = quit +end + +begin + prog = mplayer + button = SETUP + config = osd +end + +begin + prog = mplayer + button = REWIND + config = seek -10 + repeat = 1 +end + +begin + prog = mplayer + button = FOWARD + config = seek +10 + repeat = 1 +end + +begin + prog = mplayer + button = PREVIOUS + config = seek -60 + repeat = 1 +end + +begin + prog = mplayer + button = NEXT + config = seek +60 + repeat = 1 +end + +begin + prog = mplayer + button = PLAYPAUSE + config = pause +end + +begin + prog = mplayer + button = PLAYPAUSE + config = pause +end + +begin + prog = mplayer + button = VIDEO + config = quit +end + +begin + prog = mplayer + button = VOLUMEUP + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = VOLUMEDOWN + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = MUTE + config = mute +end +##XINE + + begin + prog = xine + button = PLAY + repeat = 3 + config = Play + end + + begin + prog = xine + button = STOP + repeat = 3 + config = Stop + end + + begin + prog = xine + button = BACK/EXIT + config = Quit + end + + begin + prog = xine + button = PAUSE + repeat = 3 + config = Pause + end + + begin + prog = xine + button = CH+ + repeat = 4 + config = EventUp + end + + begin + prog = xine + button = CH- + repeat = 4 + config = EventDown + end + + begin + prog = xine + button = VOL- + repeat = 4 + config = Volume- + end + + begin + prog = xine + button = VOL+ + repeat = 4 + config = Volume+ + end + + begin + prog = xine + button = OK + repeat = 0 + config = EventSelect + end + + begin + prog = xine + button = MENU + repeat = 0 + config = Menu + end + + #vol down + begin + prog = xine + button = YELLOW + repeat = 1 + config = EventLeft + end + + #vol up + begin + prog = xine + button = Red + repeat = 1 + config = EventRight + end + + begin + prog = xine + button = FFW + repeat = 2 + config = SeekRelative+30 + end + + begin + prog = xine + button = REW + repeat = 2 + config = SeekRelative-30 + end + + #ch up + begin + prog = xine + button = Green + repeat = 1 + config = SeekRelative+60 + end + + #ch down + begin + prog = xine + button = Blue + repeat = 1 + config = SeekRelative-60 + end + + #sleep + begin + prog = xine + button = GO + repeat = 1 + config = ZoomIn + end + + #display + begin + prog = xine + button = SKIP + repeat = 1 + config = ZoomOut + end + + #skip chapter forward + begin + prog = xine + button = SKIP + repeat = 1 + config = EventNext + end + + #skip chapter backward + begin + prog = xine + button = REPLAY + repeat = 1 + config = EventPrior + end diff --git a/abs/core-testing/system-templates/templates/remotes/Compro/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Compro/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Compro/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircd-dvicomce.conf b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircd-dvicomce.conf new file mode 100755 index 0000000..be3d537 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircd-dvicomce.conf @@ -0,0 +1,77 @@ +# Please make this file available to others + # by sending it to <lirc@bartelmus.de> + # + # this config file was automatically generated + # using lirc-0.8.1pre1(dev/input) on Tue Jun 20 19:52:04 2006 + # + # contributed by Craig Cook + # + # brand: DViCO FusionHDTV DVB-T Dual Digital + # model no. of remote control: Fusion MCE + # devices being controlled by this remote: + # + + begin remote + + name DViCO_Dual_Digital + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x1 + gap 251756 + toggle_bit 0 + + + begin codes + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + 0 0x000B + rew 0x00A8 + playpause 0x00A4 + ff 0x00D0 + mute 0x0071 + stop 0x0080 + rec 0x00A7 + power 0x0074 + camera 0x00D4 + live 0x0182 + folder 0x0086 + voldown 0x0072 + volup 0x0073 + chup 0x0192 + chdn 0x0193 + start 0x001C + replay 0x00A5 + skip 0x00A3 + down 0x006C + right 0x006A + left 0x0069 + up 0x0067 + ok 0x0160 + dvdmenu 0x008B + back 0x009E + setup 0x008D + tvpower 0x0164 + guide 0x016D + info 0x0166 + alttab 0x000F + dtv 0x0179 + mp3 0x0187 + dvd 0x0185 + cpf 0x016C + aspect 0x0173 + zoom 0x0174 + end codes + + end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircrc-dvicomce.txt b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircrc-dvicomce.txt new file mode 100755 index 0000000..4326a59 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/lircrc-dvicomce.txt @@ -0,0 +1,475 @@ +# Channel Up +begin +prog = mythtv +button = chup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chdn +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = voldown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = playpause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = playpause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = ff +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rew +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = skip +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = back +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = aspect +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = guide +config = osd +end + +# Pause playback +begin +prog = mplayer +button = playpause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rew +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = ff +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = skip +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = back +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = playpause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = ff +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rew +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volup +config = Volume+ +end + +begin +prog = xine +button = voldown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = skip +config = EventNext +end + +begin +prog = xine +button = back +config = EventPrior +end + +begin +prog = xine +button = info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircd-dvicomceold.conf b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircd-dvicomceold.conf new file mode 100755 index 0000000..d814713 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircd-dvicomceold.conf @@ -0,0 +1,76 @@ +# +# this config file was automatically generated +# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005 +# +# contributed by anonymous +# +# brand: DVICO +# model no. of remote control: MCE Remote +# + +begin remote + + name DVICO_MCE + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x0 + post_data_bits 8 + post_data 0x0 + gap 195956 + toggle_bit 0 + + + begin codes + ok 0x0000000000FE5E00 + dtv 0x0000000000FE0200 + mp3 0x0000000000FE0E00 + dvd 0x0000000000FE1A00 + cpf 0x0000000000FE1E00 + setup 0x0000000000FE1600 + tv_onoff 0x0000000000FE4600 + guide 0x0000000000FE0A00 + back 0x0000000000FE4900 + more 0x0000000000FE5900 + dvd_menu 0x0000000000FE4D00 + alt_tab 0x0000000000FE5500 + replay 0x0000000000FE0F00 + skip 0x0000000000FE1200 + up 0x0000000000FE5100 + down 0x0000000000FE5300 + left 0x0000000000FE5B00 + right 0x0000000000FE5F00 + start 0x0000000000FE4200 + vol_up 0x0000000000FE1500 + vol_down 0x0000000000FE0500 + ch_up 0x0000000000FE1100 + ch_down 0x0000000000FE0900 + snapshot 0x0000000000FE5200 + live 0x0000000000FE5A00 + folder_open 0x0000000000FE1900 + 1 0x0000000000FE0B00 + 2 0x0000000000FE1700 + 3 0x0000000000FE1B00 + 4 0x0000000000FE0700 + 5 0x0000000000FE5000 + 6 0x0000000000FE5400 + 7 0x0000000000FE4800 + 8 0x0000000000FE4C00 + 9 0x0000000000FE5800 + 0 0x0000000000FE0300 + aspect 0x0000000000FE1300 + fullscreen 0x0000000000FE1F00 + rewind 0x0000000000FE4300 + playpause 0x0000000000FE4700 + fastforward 0x0000000000FE4F00 + stop 0x0000000000FE0D00 + mute 0x0000000000FE5700 + record 0x0000000000FE0100 + white_onoff 0x0000000000FE4E00 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircrc-dvicomceold.txt b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircrc-dvicomceold.txt new file mode 100755 index 0000000..3d196c4 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/lircrc-dvicomceold.txt @@ -0,0 +1,526 @@ + + # Power Button + begin + prog = irexec + button = power_onoff + repeat = 3 + config = /usr/bin/mythpowerbutton.sh + end + + + # Channel Up + begin + prog = mythtv + button = ch_up + repeat = 3 + config = Up + end + + # Channel Down + begin + prog = mythtv + button = ch_down + repeat = 3 + config = Down + end + + # OK/Select + begin + prog = mythtv + button = ok + config = Space + end + + # Play/Pause + begin + prog = mythtv + button = playpause + config = P + end + + begin + prog = mythtv + button = stop + config = Esc + end + + # Escape/Exit/Back + begin + prog = mythtv + button = back + config = Esc + end + + # Escape/Exit/Back + begin + prog = mythtv + button = tv_onoff + config = Esc + end + + # big green start button + begin + prog = mythtv + button = start + repeat = 3 + config = Esc + end + + # Mute + begin + prog = mythtv + button = mute + repeat = 3 + config = F9 + end + + # Fast forward (30 sec default) + begin + prog = mythtv + button = fastforward + repeat = 24 + config = Right + end + + # Back (10 sec default) + begin + prog = mythtv + button = rewind + repeat = 24 + config = Left + end + + # Skip forward (10 min default) + begin + prog = mythtv + button = skip + repeat = 3 + config = PgDown + end + + # Skip backward (10 min default) + begin + prog = mythtv + button = replay + repeat = 3 + config = PgUp + end + + # Record + begin + prog = mythtv + button = record + repeat = 3 + config = R + end + + # OSD browse + begin + prog = mythtv + button = guide + repeat = 3 + config = O + end + + # Display EPG while in live TV, + # View selected show while in EPG + begin + prog = mythtv + button = setup + repeat = 3 + config = M + end + + # Scroll up + begin + prog = mythtv + button = up + repeat = 3 + config = Up + end + + # Scroll down + begin + prog = mythtv + button = down + repeat = 3 + config = Down + end + + # Scroll Left + begin + prog = mythtv + button = left + repeat = 3 + config = Left + end + + # Scroll Right + begin + prog = mythtv + button = right + repeat = 3 + config = Right + end + + # Bring up OSD info + begin + prog = mythtv + button = more + repeat = 3 + config = I + end + + # Change display aspect ratio + begin + prog = mythtv + button = aspect + repeat = 3 + config = W + end + + # Seek to previous commercial cut point + begin + prog = mythtv + button = snapshot + repeat = 3 + config = Q + end + + # Seek to next commercial cut point + begin + prog = mythtv + button = folder_open + repeat = 3 + config = Z + end + + # Numbers 0-9 + + begin + prog = mythtv + button = 0 + repeat = 3 + config = 0 + end + + begin + prog = mythtv + button = 1 + repeat = 3 + config = 1 + end + + begin + prog = mythtv + button = 2 + repeat = 3 + config = 2 + end + + begin + prog = mythtv + button = 3 + repeat = 3 + config = 3 + end + + begin + prog = mythtv + button = 4 + repeat = 3 + config = 4 + end + + begin + prog = mythtv + button = 5 + repeat = 3 + config = 5 + end + + begin + prog = mythtv + button = 6 + repeat = 3 + config = 6 + end + + begin + prog = mythtv + button = 7 + repeat = 3 + config = 7 + end + + begin + prog = mythtv + button = 8 + repeat = 3 + config = 8 + end + + begin + prog = mythtv + button = 9 + repeat = 3 + config = 9 + end + + begin + prog = mythtv + button = dvd_menu + config = M + end + + begin + prog = mythtv + button = vol_down + repeat = 3 + config = [ + end + + begin + prog = mythtv + button = vol_up + repeat = 3 + config = ] + end + + begin + prog = mythtv + button = dtv + config = C + end + +### MPlayer/Xine lirc setup + + # Show OSD + begin + prog = mplayer + button = guide + repeat = 3 + config = osd + end + + # Pause playback + begin + prog = mplayer + button = stop + repeat = 3 + config = pause + end + + # Skip ahead a minute if playing + # If paused, resume playing + begin + prog = mplayer + button = playpause + repeat = 3 + config = seek +1 + end + + # Stop playback and exit + begin + prog = mplayer + button = tv_onoff + repeat = 3 + config = quit + end + begin + prog = mplayer + button = back + repeat = 3 + config = quit + end + + # big green start button + begin + prog = mplayer + button = start + repeat = 3 + config = quit + end + + # Mute + begin + prog = mplayer + button = mute + repeat = 3 + config = mute + end + + # Seek back 10 seconds + begin + prog = mplayer + button = left + repeat = 3 + config = seek -10 + end + + # Seek forward 30 seconds + begin + prog = mplayer + button = right + repeat = 3 + config = seek +30 + end + + # Seek forward 3 minutes + begin + prog = mplayer + button = fastforward + repeat = 3 + config = seek +180 + end + + # Seek backward 3 minutes + begin + prog = mplayer + button = rewind + repeat = 3 + config = seek -180 + end + + # Seek forward 10 minutes + begin + prog = mplayer + button = skip + repeat = 3 + config = seek +600 + end + + # Seek backward 10 minutes + begin + prog = mplayer + button = replay + repeat = 3 + config = seek -600 + end + + # Toggle full-screen + begin + prog = mplayer + button = fullscreen + repeat = 3 + config = vo_fullscreen + end + + # Xine + + begin + prog = xine + button = playpause + repeat = 3 + config = Play + end + + begin + prog = xine + button = stop + repeat = 3 + config = Pause + end + + begin + prog = xine + button = back + config = Quit + end + + begin + prog = xine + button = tv_onoff + config = Quit + end + + begin + prog = xine + button = right + repeat = 3 + config = SeekRelative+10 + end + + begin + prog = xine + button = left + repeat = 3 + config = SeekRelative-10 + end + + begin + prog = xine + button = fastforward + repeat = 3 + config = SeekRelative+30 + end + + begin + prog = xine + button = rewind + repeat = 3 + config = SeekRelative-30 + end + + begin + prog = xine + button = skip + repeat = 3 + config = SeekRelative+300 + end + + begin + prog = xine + button = replay + repeat = 3 + config = SeekRelative-300 + end + + begin + prog = xine + button = up + repeat = 1 + config = EventUp + end + + begin + prog = xine + button = down + repeat = 1 + config = EventDown + end + + begin + prog = xine + button = ok + repeat = 0 + config = EventSelect + end + + begin + prog = xine + button = guide + repeat = 0 + config = Menu + end + + begin + prog = xine + button = setup + repeat = 0 + config = Menu + end + + begin + prog = xine + button = vol_up + repeat = 1 + config = Volume+ + end + + begin + prog = xine + button = vol_down + repeat = 1 + config = Volume- + end diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_MCE_old/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircd-dvicoslim.conf b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircd-dvicoslim.conf new file mode 100755 index 0000000..b49c0f6 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircd-dvicoslim.conf @@ -0,0 +1,63 @@ +# +# contributed by Chris Pascoe +# +# brand: DVICO +# model no. of remote control: DVB-T +# devices being controlled by this remote: +# + +begin remote + + name DVICO + bits 32 + eps 0 + aeps 0 + + one 0 0 + zero 0 0 + pre_data_bits 32 + pre_data 0x10046 + gap 195755 + post_data_bits 0 + toggle_bit 0 + + begin codes + 1 0x00000000000011F9 + 2 0x00000000000012F9 + 3 0x00000000000013F9 + 4 0x00000000000014F9 + 5 0x00000000000015F9 + 6 0x00000000000016F9 + 7 0x00000000000017F9 + 8 0x00000000000018F9 + 9 0x00000000000019F9 + 0 0x00000000000010F9 + power 0x0000000000000AF9 + pcoff 0x0000000000000CF9 + camera 0x0000000000001AF9 + record 0x0000000000001BF9 + chup 0x00000000000000F9 + chdown 0x00000000000001F9 + volup 0x00000000000002F9 + voldown 0x00000000000003F9 + playpause 0x0000000000001FF9 + rew 0x0000000000001CF9 + stop 0x0000000000001EF9 + ff 0x0000000000001DF9 + folder 0x00000000000040F9 + atvdtv 0x00000000000006F9 + dvhs 0x00000000000041F9 + menu 0x00000000000008F9 + aspect 0x00000000000007F9 + zoom 0x00000000000004F9 + epg 0x0000000000000BF9 + mute 0x0000000000000DF9 + back 0x0000000000000EF9 + hd 0x0000000000000FF9 + red 0x00000000000005F9 + green 0x00000000000009F9 + yellow 0x00000000000042F9 + blue 0x00000000000043F9 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircrc-dvicoslim.txt b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircrc-dvicoslim.txt new file mode 100755 index 0000000..b3e6089 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/lircrc-dvicoslim.txt @@ -0,0 +1,475 @@ +# Channel Up +begin +prog = mythtv +button = chup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chdown +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = chup +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = chdown +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = voldown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = playpause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = back +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = playpause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = ff +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rew +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = record +config = R +end + +# Delete +begin +prog = mythtv +button = red +config = D +end + +# OSD browse +begin +prog = mythtv +button = yellow +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = menu +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = blue +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = aspect +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = green +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = playpause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = ff +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = rew +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = back +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = aspect +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = playpause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = playpause +config = Pause +end + +begin +prog = xine +button = +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = ff +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rew +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volup +config = Volume+ +end + +begin +prog = xine +button = voldown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = back +config = EventPrior +end + +begin +prog = xine +button = aspect +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Dvico_slim/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Dvico_slim/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf new file mode 100755 index 0000000..03a5f14 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircd-flyvideo2000.conf @@ -0,0 +1,57 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.8.1(dev/input) on Wed Jun 13 19:09:39 2007 +# +# contributed by +# +# brand: /tmp/lirc.conf +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + +name FlyVideo_2000 +bits 16 +eps 30 +aeps 100 + +one 0 0 +zero 0 0 +pre_data_bits 16 +pre_data 0x8001 +gap 208092 +toggle_bit 0 + + +begin codes + Air/catTV 0x0175 + Video 0x0189 + Audio 0x0188 + Power 0x0074 + AVSource 0x0182 + FullScreen 0x0174 + Stereo 0x0170 + Mute 0x0071 + Vol+ 0x0073 + Vol- 0x0072 + Ch+ 0x0192 + Ch- 0x0193 + Recall 0x0081 + Enter 0x001C + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + 0 0x000B + +end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt new file mode 100755 index 0000000..08fb7fb --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/lircrc-flyvideo2000.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = Ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = Vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = Vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = Enter +config = Space +end + +# Play +begin +prog = mythtv +button = +config = Return +end + +# Stop +begin +prog = mythtv +button = +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = Recall +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = +config = osd +end + +# Pause playback +begin +prog = mplayer +button = +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FullScreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = +config = Play +end + +begin +prog = xine +button = +config = Stop +end + +begin +prog = xine +button = +config = Quit +end + +begin +prog = xine +button = +config = Pause +end + +begin +prog = xine +button = Ch+ +config = EventUp +end + +begin +prog = xine +button = Ch- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = Enter +config = EventSelect +end + +begin +prog = xine +button = +config = Menu +end + +begin +prog = xine +button = +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = Vol+ +config = Volume+ +end + +begin +prog = xine +button = Vol- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_2000/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf new file mode 100755 index 0000000..8b4f23e --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircd-flyvideo3000.conf @@ -0,0 +1,47 @@ +# lircd.conf.Flyvideo_3000_devinput +# +# Lirc configuration file for the LifeView FlyVideo 3000 remote. +# +# Adapted from the standard linux input layer config file found at +# http://linux.bytesex.org/v4l2/linux-input-layer-lircd.conf +# The remote name and button names are consistent with lircd.conf.Flyvideo_3000. +# +# Created January 22, 2005 +# +# contributed by Jason Anderson (jasonofhoulton@hotmail.com) +# +# brand: Lifeview +# model no. of remote control: Flyvideo 3000 +# devices being controlled by this remote: +# + +begin remote + name Flyvideo_3000 + bits 32 + begin codes + air/catv 0x10182 + video 0x10189 + audio 0x10188 + power 0x10074 + av_source 0x100b0 + full_screen 0x10174 + stereo 0x100c0 + Mute 0x10071 + 1 0x1004f + 2 0x10050 + 3 0x10051 + vol+ 0x10073 + 4 0x1004b + 5 0x1004c + 6 0x1004d + vol- 0x10072 + 7 0x10047 + 8 0x10048 + 9 0x10049 + ch+ 0x10192 + recall 0x10081 + 0 0x10052 + enter 0x10060 + ch- 0x10193 + end codes +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt new file mode 100755 index 0000000..565c2d9 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/lircrc-flyvideo3000.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = enter +config = Space +end + +# Play +begin +prog = mythtv +button = +config = Return +end + +# Stop +begin +prog = mythtv +button = +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = recall +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = +config = osd +end + +# Pause playback +begin +prog = mplayer +button = +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = full_Screen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = +config = Play +end + +begin +prog = xine +button = +config = Stop +end + +begin +prog = xine +button = +config = Quit +end + +begin +prog = xine +button = +config = Pause +end + +begin +prog = xine +button = ch+ +config = EventUp +end + +begin +prog = xine +button = ch- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = enter +config = EventSelect +end + +begin +prog = xine +button = +config = Menu +end + +begin +prog = xine +button = +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Flyvideo_3000/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Hercules/lircd-hercules.conf b/abs/core-testing/system-templates/templates/remotes/Hercules/lircd-hercules.conf new file mode 100755 index 0000000..a745dbb --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Hercules/lircd-hercules.conf @@ -0,0 +1,61 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003 +# +# contributed by Dimitris Michail <dmichail|yahoo.com> +# +# brand: Hercules +# model no. of remote control: unknown +# devices being controlled by this remote: Hercules SmartTV Stereo +# +# Works with module lirc_i2c, reports PV951 IR + +begin remote + + name HERCULES_SMARTTV_STEREO + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x61D6 + gap 199964 + toggle_bit 0 + + + begin codes + POWER 0x00000000000048B7 + MUTE 0x000000000000C837 + PREVIEW 0x000000000000F00F + FULLSCREEN 0x00000000000038C7 + AV/TV 0x0000000000008877 + TELETEXT 0x00000000000008F7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + 0 0x00000000000000FF + SNAPSHOT 0x00000000000050AF + 100+ 0x000000000000E817 + CH+ 0x00000000000058A7 + CH- 0x0000000000007887 + VOL+ 0x000000000000D827 + VOL- 0x000000000000F807 + PAUSE 0x000000000000B04F + RECORD 0x000000000000708F + STOP 0x000000000000B847 + PLAY 0x0000000000009867 + TV_REPLAY 0x0000000000006897 + TIME_SHIFT 0x00000000000028D7 + SEEK_BACK 0x00000000000018E7 + SEEK_FWD 0x00000000000030CF + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Hercules/lircrc-hercules.txt b/abs/core-testing/system-templates/templates/remotes/Hercules/lircrc-hercules.txt new file mode 100755 index 0000000..c54873b --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Hercules/lircrc-hercules.txt @@ -0,0 +1,475 @@ +# Channel Up +begin +prog = mythtv +button = CH+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = CH+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = CH- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = PAUSE +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = SEEK_FWD +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = SEEK_BACK +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = RECORD +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = PREVIEW +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = FULLSCREEN +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Closed Captioning +begin +prog = mythtv +button = TELETEXT +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = PREVIEW +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = SEEK_BACK +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = SEEK_FWD +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULLSCREEN +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = PAUSE +config = Pause +end + +begin +prog = xine +button = +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = PREVIEW +config = Menu +end + +begin +prog = xine +button = SEEK_FWD +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = SEEK_BACK +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL+ +config = Volume+ +end + +begin +prog = xine +button = VOL- +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = TELETEXT +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Hercules/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Hercules/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Hercules/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircd-kworld110.conf b/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircd-kworld110.conf new file mode 100755 index 0000000..eab7fa2 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircd-kworld110.conf @@ -0,0 +1,84 @@ +# +# this config file was automatically generated +# using lirc-0.8.1-CVS(default) on Sun Jan 14 20:53:40 2007 +# +# contributed by Craig Courtney <craig at dawnsedge.com> +# +# brand: Kworld +# model no. of remote control: ATSC 110 Remote +# devices being controlled by this remote: ATSC 110 HDTV Tuner Card +# +# Generated with homebrew serial circuit connect to reciever that came +# with the card. +# + +begin remote + + name Kworld_ATSC_110 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9084 4466 + one 604 1650 + zero 604 526 + ptrail 603 + repeat 9082 2218 + pre_data_bits 16 + pre_data 0xDF + gap 108354 + toggle_bit 0 + + + begin codes + power 0x30CF + ch+ 0x7887 + ch- 0xF807 + vol+ 0x38C7 + vol- 0xB847 + 1 0x00FF + 2 0x807F + 3 0x40BF + 4 0xC03F + 5 0x20DF + 6 0xA05F + 7 0x609F + 8 0xE01F + 9 0x10EF + 0 0x50AF + numpad_up 0x906F + numpad_enter 0xD02F + standby 0xB04F + mute 0x28D7 + stereo 0xA857 + source 0x6897 + zoom 0xE817 + shut_down 0x18E7 + up 0x08F7 + left 0x48B7 + right 0xC837 + down 0x8877 + select 0x708F + timeshift 0x9867 + stop 0x58A7 + rec 0xD827 + scan_rev 0x02FD + scan_fwd 0x827D + play_pause 0x22DD + play_stop 0xA25D + chapter_rev 0x42BD + chapter_fwd 0xC23D + a 0x12ED + b 0x926D + c 0x52AD + d 0xD22D + e 0x32CD + f 0xB24D + g 0x728D + h 0xF20D + end codes + +end remote + + diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircrc-kworld110.txt b/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircrc-kworld110.txt new file mode 100755 index 0000000..7447a46 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_110/lircrc-kworld110.txt @@ -0,0 +1,482 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = select +config = Space +end + +# Play +begin +prog = mythtv +button = play_pause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = play_pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = scan_fwd +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = scan_rev +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = chapter_fwd +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = chapter_rev +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = d +config = D +end + +# OSD browse +begin +prog = mythtv +button = b +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = e +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = c +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = zoom +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = h +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = f +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = g +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = source +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play_pause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = scan_rev +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = seek_fwd +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = chapter_fwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = chapter_rev +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play_pause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = play_pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = select +config = EventSelect +end + +begin +prog = xine +button = a +config = Menu +end + +begin +prog = xine +button = seek_fwd +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = seek_rev +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = chapter_fwd +config = EventNext +end + +begin +prog = xine +button = chapter_rev +config = EventPrior +end + +begin +prog = xine +button = source +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_110/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Kworld_110/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_110/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf b/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf new file mode 100755 index 0000000..a483e7f --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircd-kworld220.conf @@ -0,0 +1,80 @@ +# +# this config file only works with a home-brew receiver!!! +# + +# +# this config file was automatically generated +# using lirc-0.8.1(default) on Sun Jul 1 22:59:56 2007 +# +# contributed by Bruce Schultz <brucejs71 at yahoo.com.au> +# +# brand: KWorld +# model no. of remote control: +# devices being controlled by this remote: DVB-T 220 tuner card +# + +begin remote + + name KWorld-DVBT-220 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9144 4394 + one 673 1578 + zero 673 453 + ptrail 666 + repeat 9146 2141 + pre_data_bits 16 + pre_data 0xDF + gap 108141 + toggle_bit 0 + + + begin codes + power 0x30CF + standby 0xB04F + sub_tv 0x7887 + preview 0xF807 + snap 0x38C7 + shut_down 0xB847 + 1 0x00FF + 2 0x807F + 3 0x40BF + 4 0xC03F + 5 0x20DF + 6 0xA05F + 7 0x609F + 8 0xE01F + 9 0x10EF + 0 0x50AF + numpad_up 0x906F + numpad_enter 0xD02F + mute 0x28D7 + stereo 0xA857 + source 0x6897 + zoom 0xE817 + min 0x18E7 + left 0x48B7 + right 0xC837 + up 0x08F7 + down 0x8877 + select 0x708F + timeshift 0x9867 + stop 0x58A7 + rec 0xD827 + scan_rev 0x02FD + scan_fwd 0x827D + play_pause 0x22DD + play_stop 0xA25D + chapter_rev 0x42BD + chapter_fwd 0xC23D + fun1 0x12ED + fun2 0x926D + fun3 0x52AD + fun4 0xD22D + end codes + +end remote + diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt b/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt new file mode 100755 index 0000000..702d238 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_220/lircrc-kworld220.txt @@ -0,0 +1,482 @@ +# Channel Up +begin +prog = mythtv +button = up +config = Up +end + +# Channel Down +begin +prog = mythtv +button = down +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = right +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = left +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = select +config = Space +end + +# Play +begin +prog = mythtv +button = play_pause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = play_pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = scan_fwd +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = scan_rev +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = chapter_fwd +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = chapter_rev +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = fun1 +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = fun2 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = zoom +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = fun3 +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = source +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play_pause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = scan_rev +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = seek_fwd +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = chapter_fwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = chapter_rev +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play_pause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = play_pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = select +config = EventSelect +end + +begin +prog = xine +button = preview +config = Menu +end + +begin +prog = xine +button = seek_fwd +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = seek_rev +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = right +config = Volume+ +end + +begin +prog = xine +button = left +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = chapter_fwd +config = EventNext +end + +begin +prog = xine +button = chapter_rev +config = EventPrior +end + +begin +prog = xine +button = source +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_220/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Kworld_220/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_220/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircd-kworld310.conf b/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircd-kworld310.conf new file mode 100755 index 0000000..7ee4bdd --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircd-kworld310.conf @@ -0,0 +1,80 @@ +# +# this config file only works with a home-brew receiver!!! +# + +# +# this config file was automatically generated +# using lirc-0.8.1(default) on Sun Jul 1 23:10:43 2007 +# +# contributed by Bruce Schultz <brucejs71 at yahoo.com.au> +# +# brand:KWorld +# model no. of remote control: +# devices being controlled by this remote: DVB-T PE310 tuner card +# + +begin remote + + name KWorld-DVBT-PE310 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9175 4402 + one 677 1580 + zero 677 452 + ptrail 667 + repeat 9177 2145 + pre_data_bits 16 + pre_data 0xDF + gap 108444 + toggle_bit 0 + + + begin codes + power 0x30CF + standby 0xB04F + sub_tv 0x7887 + preview 0xF807 + snap 0x38C7 + shut_down 0xB847 + 1 0x00FF + 2 0x807F + 3 0x40BF + 4 0xC03F + 5 0x20DF + 6 0xA05F + 7 0x609F + 8 0xE01F + 9 0x10EF + 0 0x50AF + numpad_up 0x906F + numpad_enter 0xD02F + mute 0x28D7 + stereo 0xA857 + source 0x6897 + zoom 0xE817 + min 0x18E7 + left 0x48B7 + right 0xC837 + up 0x08F7 + down 0x8877 + select 0x708F + timeshift 0x9867 + stop 0x58A7 + rec 0xD827 + scan_rev 0x02FD + scan_fwd 0x827D + play_pause 0x22DD + play_stop 0xA25D + chapter_rev 0x42BD + chapter_fwd 0xC23D + fun1 0x12ED + fun2 0x926D + fun3 0x52AD + fun4 0xD22D + end codes + +end remote + diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircrc-kworld310.txt b/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircrc-kworld310.txt new file mode 100755 index 0000000..702d238 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_310/lircrc-kworld310.txt @@ -0,0 +1,482 @@ +# Channel Up +begin +prog = mythtv +button = up +config = Up +end + +# Channel Down +begin +prog = mythtv +button = down +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = right +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = left +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = select +config = Space +end + +# Play +begin +prog = mythtv +button = play_pause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = play_pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = scan_fwd +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = scan_rev +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = chapter_fwd +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = chapter_rev +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = fun1 +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = fun2 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = zoom +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = fun3 +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = source +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play_pause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = scan_rev +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = seek_fwd +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = chapter_fwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = chapter_rev +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play_pause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = play_pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = select +config = EventSelect +end + +begin +prog = xine +button = preview +config = Menu +end + +begin +prog = xine +button = seek_fwd +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = seek_rev +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = right +config = Volume+ +end + +begin +prog = xine +button = left +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = chapter_fwd +config = EventNext +end + +begin +prog = xine +button = chapter_rev +config = EventPrior +end + +begin +prog = xine +button = source +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_310/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Kworld_310/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_310/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf new file mode 100755 index 0000000..425e107 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircd-kworlddvbt.conf @@ -0,0 +1,71 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni <pnis at coder.hu> +# Modified by Daniel Foote <freefoote at dview dot net> to +# work with remote that came with DVB-T card. +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name KWorld_DVB-T + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + ch- 0x0000000000007887 + 7 0x000000000000E01F + preview 0x00000000000038C7 + zoom 0x00000000000018E7 + 3 0x000000000000C03F + 1 0x000000000000807F + epg 0x000000000000D02F + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + 5 0x000000000000A05F + 9 0x000000000000906F + reset 0x000000000000A857 + turnleft 0x000000000000E817 + 6 0x000000000000609F + 0 0x00000000000050AF + power 0x00000000000048B7 + scan 0x00000000000030CF + 2 0x00000000000040BF + mute 0x00000000000008F7 + snap 0x000000000000C837 + 4 0x00000000000020DF + turnup 0x00000000000000FF + 8 0x00000000000010EF + backward 0x0000000000008877 + source 0x000000000000F00F + forward 0x0000000000009867 + pip 0x00000000000028D7 + ch- 0x000000000000E817 + play 0x0000000000006897 + ch+ 0x00000000000058A7 + stop 0x000000000000B04F + function- 0x00000000000020DF + pause 0x000000000000708F + function+ 0x00000000000030CF + rec 0x000000000000B847 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt new file mode 100755 index 0000000..70272b7 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/lircrc-kworlddvbt.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = backward +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = function+ +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = function- +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = preview +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = epg +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = source +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = zoom +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = reset +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = pip +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = snap +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = epg +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = backward +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = forward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = function+ +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = function- +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = turnup +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = epg +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = backward +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = function+ +config = EventNext +end + +begin +prog = xine +button = function- +config = EventPrior +end + +begin +prog = xine +button = source +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_DVBT/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf new file mode 100755 index 0000000..5817bfd --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircd-kworldtv878.conf @@ -0,0 +1,70 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni <pnis at coder.hu> +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name kworld-878 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + power 0x0000000000007887 + source 0x000000000000E01F + scan 0x00000000000038C7 + mute 0x00000000000018E7 + tv/fm 0x000000000000C03F + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + fm_scan+ 0x000000000000F807 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + fm_scan- 0x000000000000E817 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + fm_freq+ 0x00000000000030CF + 0 0x00000000000040BF + + 0x00000000000008F7 + recall 0x000000000000C837 + fm-freq- 0x00000000000020DF + record 0x00000000000000FF + stop 0x00000000000010EF + play 0x0000000000008877 + minimze 0x000000000000F00F + ch+ 0x000000000000F807 + zoom 0x0000000000009867 + vol- 0x00000000000028D7 + ch- 0x000000000000E817 + vol+ 0x0000000000006897 + snapshot 0x00000000000058A7 + mts 0x000000000000B04F + function- 0x00000000000020DF + function 0x000000000000708F + function+ 0x00000000000030CF + reset 0x000000000000B847 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt new file mode 100755 index 0000000..e1ca297 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/lircrc-kworldv878.txt @@ -0,0 +1,482 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = snapshot +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = function+ +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = function- +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = function +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = scan +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = minimze +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = recall +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = scan +config = osd +end + +# Pause playback +begin +prog = mplayer +button = snapshot +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = +config = seek +1 +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = function- +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = function+ +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = snapshot +config = Pause +end + +begin +prog = xine +button = +config = EventUp +end + +begin +prog = xine +button = +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = source +config = Menu +end + +begin +prog = xine +button = function+ +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = function- +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = + +config = EventNext +end + +begin +prog = xine +button = recall +config = EventPrior +end + +begin +prog = xine +button = reset +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Kworld_tv878/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircd-leadtek2000xp.conf b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircd-leadtek2000xp.conf new file mode 100755 index 0000000..4238a02 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircd-leadtek2000xp.conf @@ -0,0 +1,77 @@ +# Please make this file available to others +# by sending it to <lirc at bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.8.3-CVS(dev/input) on Tue Nov 6 17:04:54 2007 +# +# contributed by: Jeff Kosowsky +# +# brand: LeadTek +# model no. of remote control: Y0400046 (bundled with Winfast 2000XP Deluxe) +# devices being controlled by this remote: LeadTek Winfast 2000XP Deluxe + +# brand: Leadtek +# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) +# +# Note: Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This +# seems to be a limitation of the remote control. + +begin remote + + name Leadtek_2000XP + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x8001 + gap 423871 + toggle_bit_mask 0x80010073 + + begin codes + POWER 0x0074 + MTS 0x0188 + TV/FM 0x0182 + VIDEO 0x0189 + DISPLAY 0x0166 + CH+ 0x0192 + CH- 0x0193 + VOL- 0x0072 + VOL+ 0x0073 + FULLSCREEN 0x0174 + TELETEXT 0x0184 + SLEEP 0x008E + BOSSKEY 0x0163 + MUTE 0x0071 + RED 0x018E + GREEN 0x018F + YELLOW 0x0190 + BLUE 0x0191 + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + 0 0x000B + . 0x0034 + FINETUNE+ 0x004E + FINETUNE- 0x004A + PIP 0x00E2 + ENTER 0x001C + RECALL 0x0195 + BACK 0x019C + PLAY 0x00A4 + NEXT 0x0197 + TIMESHIFTING 0x0169 + STOP 0x0080 + REC 0x00A7 + SNAPSHOT 0x00EA + end codes + +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircrc-leadtek2000xp.txt b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircrc-leadtek2000xp.txt new file mode 100755 index 0000000..f16beb3 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/lircrc-leadtek2000xp.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CH+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = FINETUNE+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = FINETUNE- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ENTER +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = SNAPSHOT +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = NEXT +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = BACK +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = REC +config = R +end + +# Delete +begin +prog = mythtv +button = RED +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = GREEN +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = YELLOW +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = DISPLAY +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = RECALL +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = PIP +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = BLUE +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = DISPLAY +config = osd +end + +# Pause playback +begin +prog = mplayer +button = SNAPSHOT +config = pause +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = BACK +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = NEXT +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = FINETUNE+ +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = FINETUNE- +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULLSCREEN +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = SNAPSHOT +config = Pause +end + +begin +prog = xine +button = CH+ +config = EventUp +end + +begin +prog = xine +button = CH- +config = EventDown +end + +begin +prog = xine +button = FINETUNE- +config = EventLeft +end + +begin +prog = xine +button = FINETUNE+ +config = EventRight +end + +begin +prog = xine +button = ENTER +config = EventSelect +end + +begin +prog = xine +button = DISPLAY +config = Menu +end + +begin +prog = xine +button = NEXT +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = BACK +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL+ +config = Volume+ +end + +begin +prog = xine +button = VOL- +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = TELETEXT +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_2000XP/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircd-leadtekPVR.conf b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircd-leadtekPVR.conf new file mode 100755 index 0000000..460ddcf --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircd-leadtekPVR.conf @@ -0,0 +1,82 @@ +# +# this config file was automatically generated +# using lirc-0.8.2-CVS(default) on Thu Oct 25 23:27:29 2007 +# +# contributed by +# +# brand: Leadtek +# model no. of remote control: +# devices being controlled by this remote: PVR2000 +# + +begin remote + + name PVR2000 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8946 4535 + one 530 1716 + zero 530 593 + ptrail 532 + repeat 8945 2286 + pre_data_bits 16 + pre_data 0xC03F + gap 107856 + toggle_bit_mask 0x0 + + begin codes + POWER 0x00FF + TV 0x6A95 + FM 0xEA15 + DVD 0x1AE5 + RED 0xD22D + GREEN 0x32CD + YELLOW 0xB24D + BLUE 0x728D + TELETEXT 0xF807 + SLEEP 0x02FD + MUTE 0x28D7 + BOSS_KEY 0x926D + CH_UP 0x30CF + CH_DOWN 0x08F7 + VOL_DOWN 0x10EF + VOL_UP 0x20DF + ENTER 0xC837 + CC 0x0AF5 + FULLSCREEN 0xC03F + MENU 0xF20D + SCAN 0x8A75 + REPLAY 0x42BD + PLAY 0xC23D + SKIP 0x22DD + OSD 0x4AB5 + BACK 0x2AD5 + STOP 0x629D + FORWARD 0xAA55 + LANGUAGE 0xCA35 + 1 0xA05F + 2 0x609F + 3 0xE01F + 4 0x906F + 5 0x50AF + 6 0xD02F + 7 0xB04F + 8 0x708F + 9 0xF00F + 0 0x48B7 + . 0x827D + RECALL 0x8877 + VIDEO 0x7887 + AUDIO 0xD827 + DISPLAY 0x6897 + SNAPSHOT 0x12ED + PIP 0x52AD + RECSTOP 0x629D + REC 0xE21D + TIMESHIFT 0xA25D + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircrc-leadtekPVR.txt b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircrc-leadtekPVR.txt new file mode 100755 index 0000000..a15ee21 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/lircrc-leadtekPVR.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CH_UP +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = CH_UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL_UP +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL_DOWN +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ENTER +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = SNAPSHOT +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FORWARD +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = BACK +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = REC +config = R +end + +# Delete +begin +prog = mythtv +button = RED +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = GREEN +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = YELLOW +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = DISPLAY +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = RECALL +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = PIP +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = BLUE +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = DISPLAY +config = osd +end + +# Pause playback +begin +prog = mplayer +button = SNAPSHOT +config = pause +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = BACK +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FORWARD +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULLSCREEN +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = SNAPSHOT +config = Pause +end + +begin +prog = xine +button = CH_UP +config = EventUp +end + +begin +prog = xine +button = CH_DOWN +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = ENTER +config = EventSelect +end + +begin +prog = xine +button = DISPLAY +config = Menu +end + +begin +prog = xine +button = FORWARD +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = BACK +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +config = Volume+ +end + +begin +prog = xine +button = VOL_DOWN +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = TELETEXT +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Leadtek_PVR/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf b/abs/core-testing/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf new file mode 100755 index 0000000..2df0bc6 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Lifeview/lircd-lifeview.conf @@ -0,0 +1,48 @@ +begin remote + name Lifeview_trio + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 199996 + pre_data_bits 16 + pre_data 0x8001 + + begin codes + fullscreen 0x0174 + power 0x0074 + one 0x0002 + two 0x0003 + three 0x0004 + four 0x0005 + five 0x0006 + six 0x0007 + seven 0x0008 + eight 0x0009 + nine 0x000A + zero 0x000B + recall 0x0081 + mute 0x0071 + tv/radio 0x0181 + sap 0x0170 + ch+ 0x0192 + vol- 0x0072 + enter 0x001C + vol+ 0x0073 + ch- 0x0193 + pip 0x0175 + source 0x0182 + record/pause 0x00A7 + timeshift/pause 0x0077 + rewind 0x009E + play/pause 0x00A4 + forward 0x009F + back 0x019C + stop 0x0080 + next 0x0197 + blank 0x0173 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt b/abs/core-testing/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt new file mode 100755 index 0000000..845742a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Lifeview/lircrc-lifeview.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = enter +config = Space +end + +# Play +begin +prog = mythtv +button = play/pause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = play/pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = next +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = back +config = PgUp +end + +# Record +begin +prog = mythtv +button = record/pause +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = source +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = blank +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = zero +config = 0 +end + +begin +prog = mythtv +button = one +config = 1 +end + +begin +prog = mythtv +button = two +config = 2 +end + +begin +prog = mythtv +button = three +config = 3 +end + +begin +prog = mythtv +button = four +config = 4 +end + +begin +prog = mythtv +button = five +config = 5 +end + +begin +prog = mythtv +button = six +config = 6 +end + +begin +prog = mythtv +button = seven +config = 7 +end + +begin +prog = mythtv +button = eight +config = 8 +end + +begin +prog = mythtv +button = nine +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = recall +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = pip +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = source +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play/pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = forward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = next +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = back +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play/pause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = play/pause +config = Pause +end + +begin +prog = xine +button = ch+ +config = EventUp +end + +begin +prog = xine +button = ch- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = enter +config = EventSelect +end + +begin +prog = xine +button = source +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = next +config = EventNext +end + +begin +prog = xine +button = back +config = EventPrior +end + +begin +prog = xine +button = blank +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Lifeview/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Lifeview/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Lifeview/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircd-medion-rf.conf b/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircd-medion-rf.conf new file mode 100755 index 0000000..8793475 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircd-medion-rf.conf @@ -0,0 +1,82 @@ +# Please make this file available to others +# by sending it to <lirc at bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 +# +# contributed by Dirk Aust +# +# brand: Medion, Made by X10, China +# Remote P/N: 20016398 +# Receiver P/N: 20016397 + +begin remote + + name Medion + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 139873 + toggle_bit 0 + + + begin codes + TV 0x00000014012C0000 + VCR 0x00000014022D0000 + DVD 0x00000014D9040000 + MUSIC 0x00000014DB060000 + RADIO 0x00000014032E0000 + PHOTO 0x00000014DA050000 + TV_PREVIEW 0x00000014042F0000 + CHANNEL_LIST 0x0000001405300000 + SETUP 0x00000014F01B0000 + VIDEO_DESKTOP 0x0000001406310000 + CHAN+ 0x00000014E00B0000 + VOL- 0x00000014DD080000 + MUTE 0x00000014D5000000 + VOL+ 0x00000014DE090000 + CHAN- 0x00000014E10C0000 + RED 0x0000001407320000 + GREEN 0x0000001408330000 + YELLOW 0x0000001409340000 + BLUE 0x000000140A350000 + TXT 0x00000014FE290000 + 1 0x00000014E20D0000 + 2 0x00000014E30E0000 + 3 0x00000014E40F0000 + 4 0x00000014E5100000 + 5 0x00000014E6110000 + 6 0x00000014E7120000 + 7 0x00000014E8130000 + 8 0x00000014E9140000 + 9 0x00000014EA150000 + TV/RADIO 0x00000014F11C0000 + 0 0x00000014EC170000 + DELETE 0x00000014F5200000 + RENAME 0x000000140B360000 + SNAPSHOT 0x00000014ED180000 + UP 0x00000014EF1A0000 + LEFT 0x00000014F21D0000 + OK 0x00000014F31E0000 + RIGHT 0x00000014F41F0000 + DOWN 0x00000014F7220000 + ACQ_IMAGE 0x000000140C370000 + EDIT_IMAGE 0x000000140D380000 + REW 0x00000014F9240000 + PLAY 0x00000014FA250000 + FFW 0x00000014FB260000 + RECORD 0x00000014FC270000 + STOP 0x00000014FD280000 + PAUSE 0x00000014FE290000 + PREV 0x00000014F6210000 + FULL 0x000000140E390000 + NEXT 0x00000014F8230000 + DVD_MENU 0x00000014EE190000 + DVD_AUDIO 0x000000140F3A0000 + POWER 0x00000014D7020000 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircrc-medion-rf.txt b/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircrc-medion-rf.txt new file mode 100755 index 0000000..cc69f96 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_RF/lircrc-medion-rf.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CH+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH- +config = Down +end + +# General Left +begin +prog = mythtv +button = LEFT +config = Left +end + +# General Right +begin +prog = mythtv +button = RIGHT +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = DOWN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = OK +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY_PAUSE +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = PC +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = PLAY_PAUSE +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FFWD +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = FRWND +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = NEXT +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = PREV +config = PgUp +end + +# Record +begin +prog = mythtv +button = RECORD +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = RC +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PLAY_PAUSE +config = pause +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = FRWND +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FFWD +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = NEXT +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = PREV +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY_PAUSE +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = PLAY_PAUSE +config = Pause +end + +begin +prog = xine +button = UP +config = EventUp +end + +begin +prog = xine +button = DOWN +config = EventDown +end + +begin +prog = xine +button = LEFT +config = EventLeft +end + +begin +prog = xine +button = RIGHT +config = EventRight +end + +begin +prog = xine +button = OK +config = EventSelect +end + +begin +prog = xine +button = +config = Menu +end + +begin +prog = xine +button = FFWD +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = FRWND +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL+ +config = Volume+ +end + +begin +prog = xine +button = VOL- +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = NEXT +config = EventNext +end + +begin +prog = xine +button = PREV +config = EventPrior +end + +begin +prog = xine +button = +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_RF/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Medion_RF/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_RF/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircd-medionx10-8080.conf b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircd-medionx10-8080.conf new file mode 100755 index 0000000..68c9179 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircd-medionx10-8080.conf @@ -0,0 +1,68 @@ +begin remote + name Medion_8080 + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 139996 + pre_data_bits 8 + pre_data 0x14 + + begin codes + dvdaudio 0x0F3A + power 0xD702 + dvdmenu 0xEE19 + ff 0xF823 + fullscreen 0x0E39 + bb 0xF621 + pause 0xFE29 + stop 0xFD28 + rec 0xFC27 + f 0xFB26 + play 0xFA25 + b 0xF924 + editimage 0x0D38 + acquireimage 0x0C37 + ok 0xF31E + right 0xF41F + left 0xF21D + down 0xF722 + up 0xEF1A + snapshot 0xED18 + rename 0x0B36 + delete 0xF520 + tvradio 0xF11C + 0 0xEC17 + 9 0xEA15 + 8 0xE914 + 7 0xE813 + 6 0xE712 + 5 0xE611 + 4 0xE510 + 3 0xE40F + 2 0xE30E + 1 0xE20D + txt 0xEB16 + blue 0x0A35 + yellow 0x0934 + green 0x0833 + red 0x0732 + vol+ 0xDE09 + vol- 0xDD08 + chan- 0xE10C + chan+ 0xE00B + videodesktop 0x0631 + setup 0xF01B + channellist 0x0530 + tvpreview 0x042F + photo 0xDA05 + radio 0x032E + music 0xDB06 + dvd 0xD904 + vcr 0x022D + tv 0x012C + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircrc-medionx10-8080.txt b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircrc-medionx10-8080.txt new file mode 100755 index 0000000..2476f76 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/lircrc-medionx10-8080.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = chan+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chan- +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = ff +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = bb +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = delete +config = D +end + +# OSD browse +begin +prog = mythtv +button = tvpreview +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = channellist +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = setup +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = fullscreen +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = snapshot +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = txt +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = pip +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = tvpreview +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play +config = pause +end + +# Mute +begin +prog = mplayer +button = +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = bb +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = ff +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = chan+ +config = EventUp +end + +begin +prog = xine +button = chan- +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = tvpreview +config = Menu +end + +begin +prog = xine +button = forward +#config = ff +config = SeekRelative+60 +end + +begin +prog = xine +button = rewind +#config = bb +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = channellist +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8080/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf new file mode 100755 index 0000000..f897a64 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircd-medionx10-8802.conf @@ -0,0 +1,126 @@ +# +# this config file was hand crafted for +# lirc-0.8.0(atiusb) on Sun June 11 22:49:23 2006 +# +# contributed by Ted Schipper <t.schipper@tsux.org> +# +# brand: Medion 8802 +# Remote P/N: 20029724 +# Receiver P/N: 20024123 +# model no. of remote control: Medion RF remote +# devices being controlled by this remote: Medion 8802 Multimedia Home Entertainment Design Center +# + +begin remote + + name Medion_8802 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227999 + min_repeat 5 + toggle_bit 0 + + + begin codes + Line_TV 0x719C + Line_TV 0xF11C + Rec_TV 0x6D98 + Rec_TV 0xED18 + On/Standby 0xD702 + Photo 0x5A85 + Photo 0xDA05 + Music 0x5B86 + Music 0xDB06 + Guide 0x0631 + Guide 0x86B1 + DVD_Menu 0x5984 + DVD_Menu 0xD904 + Video 0x022D + Video 0x82AD + Text 0x6B96 + Text 0xEB16 + RED/Audio 0x0732 + RED/Audio 0x87B2 + YELLOW/Angle 0x0934 + YELLOW/Angle 0x89B4 + BLUE/Title 0x0A35 + BLUE/Title 0x8AB5 + GREEN/Subtitle 0x0833 + GREEN/Subtitle 0x88B3 + Vol+ 0x5E89 + Vol+ 0xDE09 + Vol- 0x5D88 + Vol- 0xDD08 + Up 0x6F9A + Up 0xEF1A + Down 0x77A2 + Down 0xF722 + Left 0x729D + Left 0xF21D + Right 0x749F + Right 0xF41F + Ok 0x739E + Ok 0xF31E + Mute 0x5580 + Mute 0xD500 + Ch+ 0x608B + Ch+ 0xE00B + Ch- 0x618C + Ch- 0xE10C + 1 0x628D + 1 0xE20D + 2 0x638E + 2 0xE30E + 3 0x648F + 3 0xE40F + 4 0x6590 + 4 0xE510 + 5 0x6691 + 5 0xE611 + 6 0x6792 + 6 0xE712 + 7 0x6893 + 7 0xE813 + 8 0x6994 + 8 0xE994 + 9 0x6A95 + 9 0xEA15 + * 0x0C37 + * 0x8CB7 + 0 0x6C97 + 0 0xEC17 + # 0x0D38 + # 0x8DB8 + Back 0x75A0 + Back 0xF520 + Info 0x042F + Info 0x84AF + Select 0x709B + Select 0xF01B + Rewind 0x79A4 + Rewind 0xF924 + Play 0x7AA5 + Play 0xFA25 + Fast_Forward 0x7BA6 + Fast_Forward 0xFB26 + Pause 0x7EA9 + Pause 0xFE29 + Start 0x76A1 + Start 0xF621 + End 0x78A3 + End 0xF823 + Stop 0x7DA8 + Stop 0xFD28 + Record 0x7CA7 + Record 0xFC27 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt new file mode 100755 index 0000000..fb91d72 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/lircrc-medionx10-8802.txt @@ -0,0 +1,487 @@ +# Channel Up +begin +prog = mythtv +button = Ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = Left +config = Left +end + +# General Right +begin +prog = mythtv +button = Right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = Vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = Vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = Ok +config = Space +end + +# OK/Select +begin +prog = mythtv +button = Select +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = On/Standby +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Fast_Forward +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Rewind +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = RED/Audio +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = back +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Guide +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Fast_Forward +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = Rewind +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Right +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Left +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Stop +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = Up +config = EventUp +end + +begin +prog = xine +button = Down +config = EventDown +end + +begin +prog = xine +button = Left +config = EventLeft +end + +begin +prog = xine +button = Right +config = EventRight +end + +begin +prog = xine +button = Select +config = EventSelect +end + +begin +prog = xine +button = Ok +config = EventSelect +end + +begin +prog = xine +button = Guide +config = Menu +end + +begin +prog = xine +button = Fast_Forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = Vol+ +config = Volume+ +end + +begin +prog = xine +button = Vol- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = Ch+ +config = EventNext +end + +begin +prog = xine +button = Ch- +config = EventPrior +end + +begin +prog = xine +button = Info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Medion_X10_8802/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nebula/lircd-nebula.conf b/abs/core-testing/system-templates/templates/remotes/Nebula/lircd-nebula.conf new file mode 100755 index 0000000..611c804 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nebula/lircd-nebula.conf @@ -0,0 +1,88 @@ + +# this config file was automatically generated +# using lirc-0.8.0(userspace) on Wed Dec 20 19:35:11 2006 +# +# contributed by Peter Wood +# +# brand: Nebula Electronics +# model no. of remote control: DigiTV-PCI Remote +# devices being controlled by this remote: DVB-Card +# +# Note unlike the existing lircd.conf, this one was captured with +# the DigiTV IR receiver via the DVB card it's self. This was the +# remote which came with a Revision B PCI card (Brought Dec 2006). + +begin remote + + name Nebula_DVB + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x8001 + gap 135906 + toggle_bit 0 + + + begin codes + TV 0x0179 + AUX 0x0186 + DVD/CD 0x0185 + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + 0 0x000B + 16:9 0x00B7 + 14:9 0x00B8 + EXIT 0x00AE + POWER 0x0074 + PICTURE 0x016F + AUDIO 0x0188 + I 0x0166 + EPG 0x016D + MENU 0x008B + UP 0x0067 + DOWN 0x006C + LEFT 0x0069 + RIGHT 0x006A + OK 0x001C + CH+ 0x0192 + CH- 0x0193 + VOLUME+ 0x0073 + VOLUME- 0x0072 + RED 0x018E + GREEN 0x018F + YELLOW 0x0190 + BLUE 0x0191 + SUBT 0x0172 + AD 0x00B9 + TEXT 0x0184 + MUTE 0x0071 + REWIND 0x00A8 + STOP 0x0080 + PLAY 0x00CF + FFORWARD 0x00D0 + CHAPTER 0x00BA + PAUSE 0x0077 + PLAYSPEED 0x80010CF + RECORD 0x00A7 + PIP 0x00BB + ZOOM- 0x004E + ZOOM+ 0x004A + CAPTURE 0x00BC + WEB 0x00BD + EMAIL 0x00D7 + PHONE 0x00A9 + PC 0x0178 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nebula/lircrc-nebula.txt b/abs/core-testing/system-templates/templates/remotes/Nebula/lircrc-nebula.txt new file mode 100755 index 0000000..c3d70b0 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nebula/lircrc-nebula.txt @@ -0,0 +1,402 @@ +# lircrc.example.[[Nebula Digi T V]]-nativelirc
+# 2005-04-02, Samuel Jacobs
+# Save this file in ~/.mythtv/lircrc
+
+# There are so many buttons on this remote, 55 to be exact. I don't really
+# know what to do with all of them, yet I'm discovering that Myth has
+# functions for all of them and much, much more! All in all, 407 lines of
+# yummy remote-controlled icing on the delicious cake that is MythTV.
+
+# Intended for use with:
+# http://lirc.sourceforge.net/remotes/nebula_electronics/DigiTV
+# NOTE: On my system I renamed the remote to "nebdtv". To use this file
+# with the download from lirc.sf.net (which is otherwise identical to my
+# copy) simply replace all instances of "nebdtv" with "Nebula_DVB".
+
+# NOTE 2: Not all buttons are used yet, and some key binding customisations
+# will probably be made to get the most out of the extra buttons. In
+# particular "Picture" and "Audio" are currently unused so I could
+# possibly set jumppoints to [[Myth Photo]] and [[Myth Music]] in future.
+
+# NOTE 3: The buttons on the remote are listed from the top left down, row
+# by row, left to right, with any unused buttons given comments where it
+# would appear if it was used here. The number buttons are listed in their
+# entirety before starting back at the "Picture" button.
+
+# NOTE 4: I just thought of another thing that could cause confusion, the
+# volume buttons are commented out because I use KDELIRC for that. They
+# are defined however, so just uncomment them if you want to use them.
+
+# Based on, and thanks to:
+# lircrc.example.[[Hauppauge Grey]]-nativelirc
+# 2003-09-17, Robert Kulagowski
+# mailto:rkulagow@rocketmail.com
+
+# TODO: TV (will probably use for launching mythfrontend)
+# TODO: Aux (probably a jumppoint to Live TV)
+# TODO: DVD/CD (there's currently no jumppoint for generic optical media,
+# so will probably use for DVD)
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Power
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 1
+ config = 1
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 2
+ config = 2
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 3
+ config = 3
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 4
+ config = 4
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 5
+ config = 5
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 6
+ config = 6
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 7
+ config = 7
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 8
+ config = 8
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 9
+ config = 9
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 0
+ config = 0
+end
+
+# TODO: Picture
+# TODO: Audio
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = I
+ config = I
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = 16:9
+ config = W
+end
+
+# Unused: 14:9
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+# this will only work in live tv mode
+ button = EPG
+ config = S
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Exit
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Menu
+ config = M
+end
+
+# Note the "repeat =" strings in the arrows, volume and channel.
+# This means that if you hold down the key, every nth instance will be
+# passed. This depends on your system, so you may want to increase or
+# decrease this and see what happens. repeat = 1 is probably too
+# fast.
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Up
+# This is the "up" on the central diamond
+ repeat = 3
+ config = Up
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Down
+# This is the "down" on the central diamond
+ repeat = 3
+ config = Down
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Left
+# This is the "left" on the central diamond
+ repeat = 3
+ config = Left
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Right
+# This is the "right" on the central diamond
+ repeat = 3
+ config = Right
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Ok
+# Middle button on the diamond
+ config = Return
+end
+
+# The channel buttons are mapped to Page Up and Page Down.
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Ch+
+ repeat = 3
+ config = [[Pg Up]]
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Ch-
+ repeat = 3
+ config = [[Pg Down]]
+end
+
+# These are the volume buttons. Uncomment them if you want myth to handle
+# the volume.
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Volume+
+ repeat = 3
+ config = F11
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Volume-
+ repeat = 3
+ config = F10
+end
+
+# colours
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Red
+# This is the Red button
+# We'll use it for "Delete"
+ config = D
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Green
+# This is the Green button
+# We'll use it for "Extended Info"
+ config = U
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Yellow
+# This is the Yellow button
+# We'll use it for "Edit"
+ config = E
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Blue
+# This is the Blue button
+# We'll use it for "Toggle browse mode"
+ config = O
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = SubT
+ config = T
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = AD
+ config = A
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Text
+# I REALLY can't think of anything to put here, so it does the same as EPG.
+ config = S
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Mute
+ config = |
+end
+
+# Here begineth a stickered area, so I assume the labels for these buttons
+# could be easily changed post-manufacture.
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Rewind
+ config = <
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Stop
+# Again, I couldn't think of an appropriate function, so it's ESC.
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Play
+ config = P
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = FForward
+ config = >
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Chapter
+# Change focus for PiP (to change channel in the other window)
+ config = B
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Pause
+ config = P
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Playspeed
+ config = J
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Record
+ config = R
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = PiP
+# Toggle PiP on/off
+ config = V
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Zoom-
+# Use for backwards commercial skip
+ config = Q
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Zoom+
+# Use for forward commercial skip
+ config = Z
+end
+
+begin
+ prog = mythtv
+ remote = Nebula_DVB
+ button = Capture
+# Swap the PiP windows
+ config = N
+end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nebula/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nebula/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nebula/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nexus/lircd-nexus.conf b/abs/core-testing/system-templates/templates/remotes/Nexus/lircd-nexus.conf new file mode 100755 index 0000000..229db28 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nexus/lircd-nexus.conf @@ -0,0 +1,73 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 +# +# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at +# members of linux user group Vorarlberg www.lugv.at +# +# for ir remote controler from Hauppauge WinTV Nexus-S +# most of the keys are supported +# +# brand: Hauppauge +# model no. of remote control: WinTV Nexus-S +# devices being controlled by this remote: +# + +begin remote + + name Hauppauge_WinTV_Nexus-S + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 944 828 + zero 944 828 + plead 980 + gap 113932 + min_repeat 1 + toggle_bit 2 + + + begin codes + Up 0x0000000000001794 + Down 0x0000000000001795 + Left 0x0000000000001796 + Right 0x0000000000001797 + Power 0x00000000000017BD + Ok 0x00000000000017A5 + Menu 0x000000000000178D + Back 0x000000000000179F + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + 0 0x0000000000001780 + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Play 0x00000000000017B5 + Pause 0x00000000000017B0 + Stop 0x00000000000017B6 + Record 0x00000000000017B7 + FastFwd 0x00000000000017B4 + FastRwd 0x00000000000017B2 + Channel+ 0x00000000000017A0 + Channel- 0x00000000000017A1 + Volume+ 0x0000000000001790 + Volume- 0x0000000000001791 + Mute 0x000000000000178F + Timers 0x000000000000178A + Recordings 0x000000000000178E + Back 0x000000000000179F + Record 0x00000000000017B7 + end codes + +end remote + diff --git a/abs/core-testing/system-templates/templates/remotes/Nexus/lircrc-nexus.txt b/abs/core-testing/system-templates/templates/remotes/Nexus/lircrc-nexus.txt new file mode 100755 index 0000000..169da14 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nexus/lircrc-nexus.txt @@ -0,0 +1,459 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the new grey Hauppauge remote +# + + + +begin +prog = mythtv +button = Go +repeat = 3 +config = I +end + +begin +prog = mythtv +button = Up +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = Down +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = Left +repeat = 3 +config = Left +end + +begin +prog = mythtv +button = Right +repeat = 3 +config = Right +end + +# Channel Up +begin +prog = mythtv +button = Channel+ +repeat = 3 +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Channel- +repeat = 3 +config = Down +end + +# OKSelect +begin +prog = mythtv +button = Ok +repeat = 3 +config = Space +end + +# Play +begin +prog = mythtv +button = Play +repeat = 3 +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +repeat = 3 +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = Back +repeat = 3 +config = Esc +end + +# Power Off/Exit +begin +prog = irxevent +button = Power +repeat = 3 +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +repeat = 3 +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +repeat = 3 +config = | +end + +# Fast forward +begin +prog = mythtv +button = FastFwd +repeat = 3 +config = < +end + +# Rewind +begin +prog = mythtv +button = FastRwd +repeat = 3 +config = > +end + +# Record +begin +prog = mythtv +button = Record +repeat = 3 +config = R +end + +# Delete +begin +prog = mythtv +button = Red +repeat = 3 +config = D +end + +# Decrease play speed +begin +prog = mythtv +button = Green +repeat = 3 +config = U +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Menu +repeat = 3 +config = M +end + +# Scroll up +begin +prog = mythtv +button = Volume+ +repeat = 3 +config = F11 +end + +# Scroll down +begin +prog = mythtv +button = Volume- +repeat = 3 +config = F10 +end + +# double speed watch +begin +prog = mythtv +button = Yellow +repeat = 3 +config = J +end + +# Bring up Time stretch +begin +prog = mythtv +button = Blue +repeat = 3 +config = A +end + +# Numbers 0-9 +begin +prog = mythtv +button = 0 +repeat = 3 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 3 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 3 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 3 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 3 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 3 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 3 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 3 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 3 +config = 9 +end + + + +###### MPlayer lirc setup +# Show OSD +begin +prog = mplayer +button = Menu +repeat = 3 +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +repeat = 3 +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = Play +repeat = 3 +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = Stop +repeat = 3 +config = quit +end + +# Mute +begin +prog = mplayer +button = Mute +repeat = 3 +config = mute +end + +begin +prog = mplayer +button = Left +repeat = 3 +config = seek -10 +end + +# Seek back 10 seconds +begin +prog = mplayer +button = FastRwd +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = Right +repeat = 3 +config = seek +30 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FastFwd +repeat = 3 +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Back +repeat = 3 +config = quit +end + + + + +###### Xine lirc setup +begin +prog = xine +button = Play +repeat = 3 +config = Play +end + +begin +prog = xine +button = Stop +repeat = 3 +config = Stop +end + +begin +prog = xine +button = Back +repeat = 3 +config = Quit +end + +begin +prog = xine +button = Pause +repeat = 3 +config = Pause +end + +begin +prog = xine +button = Up +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = Down +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = Left +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = Right +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = Ok +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = FastFwd +repeat = 3 +config = SpeedFaster +end + +begin +prog = xine +button = FastRwd +repeat = 3 +config = SpeedSlower +end + +begin +prog = xine +button = Volume+ +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = Volume- +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = Mute +repeat = 3 +config = Mute +end + +begin +prog = xine +button = Menu +repeat = 3 +config = RootMenu +end + + diff --git a/abs/core-testing/system-templates/templates/remotes/Nexus/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nexus/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nexus/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_500/lircd-nova500.conf b/abs/core-testing/system-templates/templates/remotes/Nova_500/lircd-nova500.conf new file mode 100755 index 0000000..c66c9e5 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_500/lircd-nova500.conf @@ -0,0 +1,69 @@ +# +# brand: Hauppauge NOVA-T-500 +# model no. of remote control: Hauppage Nova-T-500 Snowboard Shape Silver over Black +# + +begin remote + + name NOVA-T500 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x1 + gap 199999 + toggle_bit 0 + + + begin codes + Go 0x0162 + Power 0x0074 + TV 0x0179 + Videos 0x0189 + Music 0x0188 + Pictures 0x00E2 + Guide 0x016D + Radio 0x0181 + ArrowUp 0x0067 + ArrowLeft 0x0069 + OK 0x0160 + ArrowRight 0x006A + ArrowDown 0x006C + BackExit 0x009E + Menu 0x008B + VolumeUp 0x0073 + VolumeDown 0x0072 + PrevCh 0x016B + Mute 0x0071 + ChannelUp 0x0192 + ChannelDown 0x0193 + Record 0x00A7 + Rewind 0x00A8 + SkipBack 0x0195 + Play 0x00CF + Pause 0x0077 + Stop 0x0080 + Fwdwind 0x00D0 + SkipFwd 0x0197 + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + Star 0x0037 + 0 0x000B + # 0x0029 + Red 0x018E + Green 0x018F + Yellow 0x0190 + Blue 0x0191 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_500/lircrc-nova500.txt b/abs/core-testing/system-templates/templates/remotes/Nova_500/lircrc-nova500.txt new file mode 100755 index 0000000..2d74c3d --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_500/lircrc-nova500.txt @@ -0,0 +1,559 @@ +# /etc/lircrc +# ln ~mythtv/.mythtv/lircrc +# +# MythTV native LIRC config file for +# Hauppage Nova-T-500 PCI Dual Tuners DVB-T +# Snowboard shape remote +# Silver on top Black underneath +# 45 buttons +# +# Originally +# By Jarod Wilson, 2003/12/21 +# Amalgamated from Jeff Campbell's .lircrc + + + +################## MythTV Control ###################### +### http://www.mythtv.org/wiki/index.php/Keybindings ### + +# Remote Button +## MythTV function + + +# Go +## Go to home page +begin +prog = mythtv +button = Go +config = ALT+H +end + +# Power +## Turns monitor in Standby +#begin +#prog = irexec +#button = Power +#config = sudo vbetool dpms on ; sudo vbetool dpms off +#end + +# TV +## Go to Watch TV +begin +prog = mythtv +button = TV +config = ALT+T +end + +# Videos +## Go to MythVideo +begin +prog = mythtv +button = Videos +config = ALT+V +end + +# Music +## Go to MythMusic +begin +prog = mythtv +button = Music +config = ALT+M +end + +# Pictures +## Go to MythGallery +begin +prog = mythtv +button = Pictures +config = ALT+P +end + +# Guide +## display EPG +begin +prog = mythtv +button = Guide +config = s +end + +# Radio + + + +# ArrowUp +## Up +begin +prog = mythtv +button = ArrowUp +config = Up +end + +# ArrowLeft +## Left +begin +prog = mythtv +button = ArrowLeft +config = Left +end + +# OK +## Select/enter/resolve +begin +prog = mythtv +button = OK +config = Space +end + +# ArrowRight +## Right +begin +prog = mythtv +button = ArrowRight +config = Right +end + +# ArrowDown +## Down +begin +prog = mythtv +button = ArrowDown +config = Down +end + +# BackExit +## Exit/go back/cancel +begin +prog = mythtv +button = BackExit +config = Esc +end + +# Menu +## Menu +begin +prog = mythtv +button = Menu +config = m +end + +# VolumeUp +## Volume Up +begin +prog = mythtv +button = VolumeUp +config = F11 +end + +# VolumeDown +## Volume down +begin +prog = mythtv +button = VolumeDown +config = F10 +end + +# PrevCh +## Change tuner card input +begin +prog = mythtv +button = PrevCh +config = c +end + +# Mute +## Mute +begin +prog = mythtv +button = Mute +config = | +end + +# ChannelUp +begin +prog = mythtv +button = ChannelUp +config = Up +end + +# ChannelDown +begin +prog = mythtv +button = ChannelDown +config = Down +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Rewind +begin +prog = mythtv +button = Rewind +config = Left +end + +# SkipBack +begin +prog = mythtv +button = SkipBack +config = PgUp +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Fwdwind +begin +prog = mythtv +button = Fwdwind +config = Right +end + +# SkipFwd +begin +prog = mythtv +button = SkipFwd +config = PgDown +end + +# 1 +begin +prog = mythtv +button = 1 +config = 1 +end + +# 2 +begin +prog = mythtv +button = 2 +config = 2 +end + +# 3 +begin +prog = mythtv +button = 3 +config = 3 +end + +# 4 +begin +prog = mythtv +button = 4 +config = 4 +end + +# 5 +begin +prog = mythtv +button = 5 +config = 5 +end + +# 6 +begin +prog = mythtv +button = 6 +config = 6 +end + +# 7 +begin +prog = mythtv +button = 7 +config = 7 +end + +# 8 +begin +prog = mythtv +button = 8 +config = 8 +end + +# 9 +begin +prog = mythtv +button = 9 +config = 9 +end + +# Star +## Info +begin +prog = mythtv +button = Star +config = i +end + +# 0 +begin +prog = mythtv +button = 0 +config = 0 +end + +# # +## Toggle recording of current program (cycles through types) +begin +prog = mythtv +button = # +config = r +end + +# Red +## Picture zoom +begin +prog = mythtv +button = Red +config = W +end + +# Green +# OSD navigation through channels/programs +begin +prog = mythtv +button = Green +config = O +end + +# Yellow +begin +prog = mythtv +button = Yellow +config = Q +end + +# Blue +begin +prog = mythtv +button = Blue +config = Z +end + + + +##### MPlayer lirc setup +# Show OSD +begin +prog = mplayer +button = Menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = Play +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = Stop +config = quit +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +begin +prog = mplayer +button = ArrowLeft +config = seek -10 +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +config = seek -10 +end + +begin +prog = mplayer +button = ArrowRight +config = seek +30 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = Fwdwind +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = BackExit +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = SkipFwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = SkipBack +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = Star +config = vo_fullscreen +end + + + +###### Xine lirc setup +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = BackExit +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = ArrowUp +config = EventUp +end + +begin +prog = xine +button = ArrowDown +config = EventDown +end + +begin +prog = xine +button = ArrowLeft +config = EventLeft +end + +begin +prog = xine +button = ArrowRight +config = EventRight +end + +begin +prog = xine +button = OK +config = EventSelect +end + +begin +prog = xine +button = Fwdwind +config = SpeedFaster +end + +begin +prog = xine +button = Rewind +config = SpeedSlower +end + +begin +prog = xine +button = VolumeUp +config = Volume+ +end + +begin +prog = xine +button = VolumeDown +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Menu +config = RootMenu +end + +begin +prog = xine +button = SkipFwd +config = EventNext +end + +begin +prog = xine +button = SkipBack +config = EventPrior +end + +begin +prog = xine +button = Go +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_500/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nova_500/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_500/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T/lircd-novat.conf b/abs/core-testing/system-templates/templates/remotes/Nova_T/lircd-novat.conf new file mode 100755 index 0000000..27a575d --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T/lircd-novat.conf @@ -0,0 +1,60 @@ +begin remote + name nova-t + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 135988 + pre_data_bits 16 + pre_data 0x8001 + + begin codes + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + 0 0x000B + * 0x0184 + # 0x0172 + red 0x018E + green 0x018F + yellow 0x0190 + blue 0x0191 + power 0x0074 + go 0x0161 + tv 0x0179 + videos 0x0189 + music 0x0188 + pictures 0x016F + guide 0x016D + radio 0x0181 + up 0x0067 + left 0x0069 + right 0x006A + down 0x006C + ok 0x001C + back 0x00A8 + menu 0x008B + prev-ch 0x019C + mute 0x0071 + volup 0x0073 + voldown 0x0072 + chanup 0x0192 + chandown 0x0193 + rec 0x00A7 + stop 0x0080 + forward 0x00D0 + skipback 0x00A5 + skipforward 0x00A3 + play 0x00CF + pause 0x0077 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T/lircrc-novat.txt b/abs/core-testing/system-templates/templates/remotes/Nova_T/lircrc-novat.txt new file mode 100755 index 0000000..f075729 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T/lircrc-novat.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = chanup +config = Up +end + +# Channel Down +begin +prog = mythtv +button = chandown +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = volup +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = voldown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = back +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = skipforward +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = skipback +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = red +config = D +end + +# OSD browse +begin +prog = mythtv +button = menu +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = yellow +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = blue +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = prev-ch +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = guide +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = back +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = forward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = skipforward +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = skipback +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = back +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = volup +config = Volume+ +end + +begin +prog = xine +button = voldown +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = skipforward +config = EventNext +end + +begin +prog = xine +button = skipback +config = EventPrior +end + +begin +prog = xine +button = guide +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nova_T/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircd-novatusb2.conf b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircd-novatusb2.conf new file mode 100755 index 0000000..d2bbee6 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircd-novatusb2.conf @@ -0,0 +1,77 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.8.1-CVS(dev/input) on Sun Oct 8 22:51:46 2006 +# +# contributed by JonS +# +# brand: irrecord.nova-T-usb +# model no. of remote control: Hauppage Nova-T USB Snowboard Shape Silver over Black +# devices being controlled by this remote: MythTV +# + +begin remote + + name nova-T-usb + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x1 + gap 199999 + toggle_bit 0 + + + begin codes + Go 0x0162 + Power 0x0074 + TV 0x0179 + Videos 0x0189 + Music 0x0188 + Pictures 0x00E2 + Guide 0x016D + Radio 0x0181 + ArrowUp 0x0067 + ArrowLeft 0x0069 + OK 0x0160 + ArrowRight 0x006A + ArrowDown 0x006C + BackExit 0x009E + Menu 0x008B + VolumeUp 0x0073 + VolumeDown 0x0072 + PrevCh 0x016B + Mute 0x0071 + ChannelUp 0x0192 + ChannelDown 0x0193 + Record 0x00A7 + Rewind 0x00A8 + SkipBack 0x0195 + Play 0x00CF + Pause 0x0077 + Stop 0x0080 + Fwdwind 0x00D0 + SkipFwd 0x0197 + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + * 0x0037 + 0 0x000B + # 0x0029 + Red 0x018E + Green 0x018F + Yellow 0x0190 + Blue 0x0191 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircrc-novatusb2.txt b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircrc-novatusb2.txt new file mode 100755 index 0000000..fad1483 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/lircrc-novatusb2.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ChannelUp +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ChannelDown +config = Down +end + +# General Left +begin +prog = mythtv +button = ArrowLeft +config = Left +end + +# General Right +begin +prog = mythtv +button = ArrowRight +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ArrowUp +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ArrowDown +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VolumeUp +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VolumeDown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = OK +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = BackExit +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FwdWind +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = SkipFwd +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = SkipBack +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = Red +config = D +end + +# OSD browse +begin +prog = mythtv +button = Green +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Yellow +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = Blue +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = PrevCh +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Guide +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FwdWind +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = SkipFwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = SkipBack +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = BackExit +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = ArrowUp +config = EventUp +end + +begin +prog = xine +button = ArrowDown +config = EventDown +end + +begin +prog = xine +button = ArrowLeft +config = EventLeft +end + +begin +prog = xine +button = ArrowRight +config = EventRight +end + +begin +prog = xine +button = OK +config = EventSelect +end + +begin +prog = xine +button = Guide +config = Menu +end + +begin +prog = xine +button = FwdWind +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VolumeUp +config = Volume+ +end + +begin +prog = xine +button = VolumeDown +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = SkipFwd +config = EventNext +end + +begin +prog = xine +button = SkipBack +config = EventPrior +end + +begin +prog = xine +button = Menu +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nova_T_USB2/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia/lircd-nvidia.conf b/abs/core-testing/system-templates/templates/remotes/Nvidia/lircd-nvidia.conf new file mode 100755 index 0000000..133ac00 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia/lircd-nvidia.conf @@ -0,0 +1,62 @@ +begin remote + name nvidia + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 227970 + pre_data_bits 8 + pre_data 0x14 + + begin codes + CANCIL 0xDF0A + RIGHTMOUSE 0x517C + LEFTMOUSE 0x4D78 + PAUSE 0x4D78 + STOP 0xFD28 + REC 0xFC27 + ADVANCE 0xFB26 + PLAY 0xFA25 + REPLAY 0xF924 + FFORWARD 0xF823 + REWIND 0xF621 + OK 0xF31E + SLOW 0xF520 + LIVETV 0xF11C + LEFT 0xF21D + RIGHT 0xF41F + DOWN 0xF722 + UP 0xEF1A + SETUP 0xF01B + DVDMENU 0xEE19 + SNAPSHOT 0xED18 + CC 0xEB16 + 0 0xEC17 + 9 0xEA15 + 8 0xE914 + 7 0xE813 + 6 0xE712 + 5 0xE611 + 4 0xE510 + 3 0xE40F + 2 0xE30E + 1 0xE20D + ZOOM 0xFF2A + INPUT 0x002B + CHAN- 0xE10C + CHAN+ 0xE00B + VOL- 0xDD08 + VOL+ 0xDE09 + WEB 0xDC07 + MUSIC 0xDB06 + PHOTO 0xDA05 + DVDVCD 0xD904 + DVR 0xD803 + CHSURF 0xD702 + CHGUIDE 0xD601 + MUTE 0xD500 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia/lircrc-nvidia.txt b/abs/core-testing/system-templates/templates/remotes/Nvidia/lircrc-nvidia.txt new file mode 100755 index 0000000..53c133b --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia/lircrc-nvidia.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CHAN+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CHAN- +config = Down +end + +# General Left +begin +prog = mythtv +button = LEFT +config = Left +end + +# General Right +begin +prog = mythtv +button = RIGHT +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = DOWN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = OK +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = CANCIL +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = PAUSE +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FFORWARD +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = REWIND +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = ADVANCE +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = REPLAY +config = PgUp +end + +# Record +begin +prog = mythtv +button = REC +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = CHGUIDE +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = CHSURF +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = INPUT +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = SETUP +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = CHGUIDE +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +config = pause +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = REWIND +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FFORWARD +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = ADVANCE +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = REPLAY +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = ZOOM +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = PAUSE +config = Pause +end + +begin +prog = xine +button = UP +config = EventUp +end + +begin +prog = xine +button = DOWN +config = EventDown +end + +begin +prog = xine +button = LEFT +config = EventLeft +end + +begin +prog = xine +button = RIGHT +config = EventRight +end + +begin +prog = xine +button = OK +config = EventSelect +end + +begin +prog = xine +button = CHGUIDE +config = Menu +end + +begin +prog = xine +button = FFORWARD +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = REWIND +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL+ +config = Volume+ +end + +begin +prog = xine +button = VOL- +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = ADVANCE +config = EventNext +end + +begin +prog = xine +button = REPLAY +config = EventPrior +end + +begin +prog = xine +button = CHSURF +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nvidia/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircd-nvidiax10.conf b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircd-nvidiax10.conf new file mode 100755 index 0000000..1c06639 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircd-nvidiax10.conf @@ -0,0 +1,71 @@ +begin remote + name nvidiax10 + bits 40 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 235987 + + begin codes + mute 0x14D5000000 + playlist 0x14D6010000 + chSurf 0x14D7020000 + dvr 0x14D8030000 + dvd 0x14D9040000 + photo 0x14DA050000 + music 0x14DB060000 + web 0x14DC070000 + L 0x144D780000 + R 0x14517C0000 + ESC 0x14DF0A0000 + VOL+ 0x14DE090000 + VOL- 0x14DD080000 + CHAN- 0x14E10C0000 + CHAN+ 0x14E00B0000 + angle 0x14002B0000 + zoom 0x14FF2A0000 + 0 0x14EC170000 + 1 0x14E20D0000 + 2 0x14E30E0000 + 3 0x14E40F0000 + 4 0x14E5100000 + 5 0x14E6110000 + 6 0x14E7120000 + 7 0x14E8130000 + 8 0x14E9140000 + 9 0x14EA150000 + TXT 0x14EB160000 + SnapShot 0x14ED180000 + DVDMenu 0x14EE190000 + setup 0x14F01B0000 + audio 0x14F11C0000 + slow 0x14F5200000 + up 0x14EF1A0000 + down 0x14F7220000 + left 0x14F21D0000 + right 0x14F41F0000 + ok 0x14F31E0000 + back 0x14F6210000 + forward 0x14F8230000 + fRewind 0x14F9240000 + play 0x14FA250000 + ffw 0x14FB260000 + rec 0x14FC270000 + stop 0x14FD280000 + pause 0x14FE290000 + + mouse_n 0x0000001447720000 + mouse_ne 0x000000144A750000 + mouse_e 0x0000001446710000 + mouse_se 0x000000144B760000 + mouse_s 0x0000001448730000 + mouse_sw 0x000000144C770000 + mouse_w 0x0000001445700000 + mouse_nw 0x0000001449740000 + mouse_left 0x000000144E790000 + mouse_right 0x00000014527D0000 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircrc-nvidiax10.txt b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircrc-nvidiax10.txt new file mode 100755 index 0000000..0774c10 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/lircrc-nvidiax10.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CHAN+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CHAN- +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = ESC +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = ffw +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = fRewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = forward +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = back +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = chSurf +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = TXT +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = chSurf +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = fRewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = ffw +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = forward +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = back +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = zoom +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = ESC +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = chSurf +config = Menu +end + +begin +prog = xine +button = ffw +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = fRewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL+ +config = Volume+ +end + +begin +prog = xine +button = VOL- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = forward +config = EventNext +end + +begin +prog = xine +button = back +config = EventPrior +end + +begin +prog = xine +button = +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Nvidia_X10/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/One4All/lircd-one4all.conf b/abs/core-testing/system-templates/templates/remotes/One4All/lircd-one4all.conf new file mode 100755 index 0000000..00060fd --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All/lircd-one4all.conf @@ -0,0 +1,111 @@ +#------------------------------------------------------------------------------
+# contributed by Claas Langbehn (claas@bigfoot.com) 01-May-2000
+#------------------------------------------------------------------------------
+#
+# filename: RC-5
+# encoding: shift encoded, RC-5
+# brand: Philips (and others)
+# model: all
+# supported devices: all
+#
+#------------------------------------------------------------------------------
+
+begin remote
+
+ name one4all
+ bits 11
+ flags RC5|CONST_LENGTH
+ eps 20
+ aeps 0
+
+ header 0 0
+ one 889 889
+ zero 889 889
+ plead 889
+ ptrail 0
+ foot 0 0
+ repeat 0 0
+ pre_data_bits 2
+ pre_data 0x02
+ post_data_bits 0
+ post_data 0x0
+ pre 0 0
+ post 0 0
+ gap 113792
+ toggle_bit 2
+ frequency 36000
+ duty_cycle 50
+
+ begin codes
+ 0 0x0000000000000140
+ 1 0x0000000000000141
+ 2 0x0000000000000142
+ 3 0x0000000000000143
+ 4 0x0000000000000144
+ 5 0x0000000000000145
+ 6 0x0000000000000146
+ 7 0x0000000000000147
+ 8 0x0000000000000148
+ 9 0x0000000000000149
+ GUIDE 0x000000000000014a
+ SELECT 0x000000000000014b
+ POWER 0x000000000000014c
+ Mute 0x000000000000014d
+ Move 0x000000000000014e
+ VOL+ 0x0000000000000150
+ VOL- 0x0000000000000151
+ PREVCH 0x0000000000000152
+ NEXTCH 0x0000000000000153
+ SLOMO 0x0000000000000154
+ ANGLE 0x0000000000000155
+ MENU 0x000000000000015d
+ SUBT 0x000000000000015e
+ CH+ 0x0000000000000160
+ CH- 0x0000000000000161
+ PIP 0x0000000000000162
+ Swap 0x0000000000000163
+ PAUSE 0x0000000000000169
+ PVRMENU 0x000000000000016e
+ EXIT 0x0000000000000171
+ REW 0x0000000000000172
+ REPLAY 0x0000000000000173
+ FFW 0x0000000000000174
+ PLAY 0x0000000000000175
+ STOP 0x0000000000000176
+ REC 0x0000000000000177
+ SKIP 0x0000000000000178
+ Prev 0x000000000000017b
+ INFO 0x000000000000017c
+ TV/VID 0x000000000000017e
+ Audio 0x000000000000017f
+ THDN 0x0000000000000268
+ THUP 0x0000000000000269
+ end codes
+
+end remote
+
+begin remote
+
+ name PHILIPS_RC-5_ALT
+ bits 13
+ flags RC5|CONST_LENGTH
+ eps 20
+ aeps 0
+
+ one 889 889
+ zero 889 889
+ plead 889
+ gap 113792
+ min_repeat 1
+ toggle_bit 2
+
+ frequency 36000
+ duty_cycle 50
+
+ begin codes
+ LEFT 0x0000000000000155
+ RIGHT 0x0000000000000156
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/system-templates/templates/remotes/One4All/lircrc-one4all.txt b/abs/core-testing/system-templates/templates/remotes/One4All/lircrc-one4all.txt new file mode 100755 index 0000000..0b67174 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All/lircrc-one4all.txt @@ -0,0 +1,730 @@ +# lircrc.URC-6131/RC-5 (Hauppauge PVR-250) +# 2004-01-25, Joe Votour +# mailto:vulturej@vulturesnest.net +# Save this file in ~/.mythtv/lircrc, and make a symlink with ~/.lircrc +# TODO: Test/configure the mplayer buttons +# Finish the rest of the remote buttons for MythTV + +# Power button/quit +#begin +# prog = mythtv +# button = POWER +# config = Esc +#end + +# Change TV card input +begin + prog = mythtv + button = TV/VID + config = C +end + +# Toggle Picture-In-Picture +begin + prog = mythtv + button = PIP + config = V +end + +# Swap the PiP windows +begin + prog = mythtv + button = Swap + config = N +end + +# Number keys +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = 0 + config = 0 +end + +# Exit button (returning to menu) +begin + prog = mythtv + button = EXIT + config = Esc +end + +# Menu button (TV menu) +begin + prog = mythtv + button = MENU + config = M +end + +# Guide button (EPG) +begin + prog = mythtv + button = GUIDE + config = S +end + +# Delete (i.e. View recordings screen) +begin + prog = mythtv + button = POWER + config = D +end + +# View program info (OSD) +begin + prog = mythtv + button = INFO + config = I +end + +# Note the "repeat =" strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +# Volume Down +begin + prog = mythtv + button = VOL- + repeat = 3 + config = F10 +end + +# Volume Up +begin + prog = mythtv + button = VOL+ + repeat = 3 + config = F11 +end + +# Channel Up +begin + prog = mythtv + button = THUP + repeat = 3 + config = Up +end + +# Channel Down +begin + prog = mythtv + button = THDN + repeat = 3 + config = Down +end + +# Navigational arrows +begin + prog = mythtv + button = LEFT + repeat = 3 + config = Left +end + +begin + prog = mythtv + button = RIGHT + repeat = 3 + config = Right +end + +begin + prog = mythtv + button = SELECT + config = Return +end + +# Mute +begin + prog = mythtv + button = Mute + config = F9 +end + +# Browse mode +#begin +# prog = mythtv +# button = DISPLAY +# config = O +#end + +# Channel history +begin + prog = mythtv + button = Prev + config = H +end + +# Rewind +begin + prog = mythtv + button = REW + config = Left +end + +# Play +begin + prog = mythtv + button = PLAY + config = P +end + +# Fast-forward +begin + prog = mythtv + button = FFW + config = Right +end + +# Next chapter (page down for EPG) +begin + prog = mythtv + button = NEXTCH + config = PgDown +end + +# Previous chapter (page up for EPG) +begin + prog = mythtv + button = PREVCH + config = PgUp +end + +# Record +begin + prog = mythtv + button = REC + config = R +end + +# Teletext/Closed Captioning +# Audio button doubles as CC +begin + prog = mythtv + button = Audio + config = T +end + +# Pause +begin + prog = mythtv + button = PAUSE + config = P +end + +# Backwards commercial skip +begin + prog = mythtv + button = REPLAY + config = Q +end + +# Forward commercial skip +begin + prog = mythtv + button = SKIP + config = Z +end + +# +# mplayer keys (Untested) +# +begin + prog = mplayer + button = EXIT + config = quit +end + +begin + prog = mplayer + button = MUTE + config = mute +end + +begin + prog = mplayer + button = VOL- + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = VOL+ + config = volume 1 + repeat = 1 +end + +begin + prog = mplayer + button = PLAY + config = pause +end + +begin + prog = mplayer + button = PAUSE + config = pause +end + +begin + prog = mplayer + button = STOP + config = quit +end + +begin + prog = mplayer + button = DISPLAY + config = osd +end + +begin + prog = mplayer + button = FFW + config = skip 1 +end + +begin + prog = mplayer + button = REW + config = skip -1 +end + +begin + prog = mplayer + button = REPLAY + config = skip -60 +end + +begin + prog = mplayer + button = SKIP + config = skip 60 +end + +## +# xine key bindings. +# Automatically generated by xine-ui version 0.9.23. +# To run xine: +# MythVideo: xine -D -pfh %s +# MythDVD: xine -D -pfhq --auto-scan dvd (for DVD) +# xine -D -pfhq --auto-scan vcdo (for VCD) +## + +# start playback +begin + button = PLAY + prog = xine + repeat = 3 + config = Play +end + +# playback pause toggle +begin + button = PAUSE + prog = xine + repeat = 3 + config = Pause +end + +# stop playback +begin + button = STOP + prog = xine + repeat = 3 + config = Stop +end + +# set position to -10 minutes in current stream +begin + button = REPLAY + prog = xine + repeat = 3 + config = SeekRelative-600 +end + +# set position to +10 minutes in current stream +begin + button = SKIP + prog = xine + repeat = 3 + config = SeekRelative+600 +end + +# set position to -30 seconds in current stream +begin + button = REW + prog = xine + repeat = 3 + config = SeekRelative-30 +end + +# set position to +30 seconds in current stream +begin + button = FFW + prog = xine + repeat = 3 + config = SeekRelative+30 +end + +# decrement playback speed +begin + button = SLOMO + prog = xine + repeat = 3 + config = SpeedSlower +end + +# reset playback speed +begin + button = PLAY + prog = xine + repeat = 3 + config = SpeedReset +end + +# increment audio volume +begin + button = VOL+ + prog = xine + repeat = 2 + config = Volume+ +end + +# decrement audio volume +begin + button = VOL- + prog = xine + repeat = 2 + config = Volume- +end + +# increment amplification level +#begin +# remote = xxxxx +# button = xxxxx +# prog = xine +# repeat = 3 +# config = Amp+ +#end + +# decrement amplification level +#begin +# remote = xxxxx +# button = xxxxx +# prog = xine +# repeat = 3 +# config = Amp- +#end + +# reset amplification to default value +#begin +# remote = xxxxx +# button = xxxxx +# prog = xine +# repeat = 3 +# config = ResetAmp +#end + +# audio muting toggle +begin + button = Mute + prog = xine + repeat = 3 + config = Mute +end + +# select next audio channel +begin + button = Audio + prog = xine + repeat = 3 + config = AudioChannelNext +end + +# select next sub picture (subtitle) channel +begin + button = SUBT + prog = xine + repeat = 3 + config = SpuNext +end + +# jump to media Menu +#begin +# button = MENU +# prog = xine +# repeat = 3 +# config = Menu +#end + +# jump to Title Menu +#begin +# remote = xxxxx +# button = xxxxx +# prog = xine +# repeat = 3 +# config = TitleMenu +#end + +# jump to Root Menu +begin + button = MENU + prog = xine + repeat = 3 + config = RootMenu +end + +# jump to Subpicture Menu +begin + remote = xxxxx + button = xxxxx + prog = xine + repeat = 3 + config = SubpictureMenu +end + +# jump to Audio Menu +begin + button = Audio + prog = xine + repeat = 3 + config = AudioMenu +end + +# jump to Angle Menu +begin + button = Angle + prog = xine + repeat = 3 + config = AngleMenu +end + +# jump to Part Menu +#begin +# remote = xxxxx +# button = xxxxx +# prog = xine +# repeat = 3 +# config = PartMenu +#end + +# menu navigate up +begin + button = CH+ + prog = xine + repeat = 3 + config = EventUp +end + +# menu navigate down +begin + button = CH- + prog = xine + repeat = 3 + config = EventDown +end + +# menu navigate left +begin + button = LEFT + prog = xine + repeat = 3 + config = EventLeft +end + +# menu navigate right +begin + button = RIGHT + prog = xine + repeat = 3 + config = EventRight +end + +# menu select +begin + button = SELECT + prog = xine + repeat = 3 + config = EventSelect +end + +# jump to next chapter +begin + button = NEXTCH + prog = xine + repeat = 3 + config = EventNext +end + +# jump to previous chapter +begin + button = PREVCH + prog = xine + repeat = 3 + config = EventPrior +end + +# select next angle +begin + button = ANGLE + prog = xine + repeat = 3 + config = EventAngleNext +end + +# display stream information using OSD +begin + button = INFO + prog = xine + repeat = 3 + config = OSDStreamInfos +end + +# enter the number 0 +begin + button = 0 + prog = xine + repeat = 3 + config = Number0 +end + +# enter the number 1 +begin + button = 1 + prog = xine + repeat = 3 + config = Number1 +end + +# enter the number 2 +begin + button = 2 + prog = xine + repeat = 3 + config = Number2 +end + +# enter the number 3 +begin + button = 3 + prog = xine + repeat = 3 + config = Number3 +end + +# enter the number 4 +begin + button = 4 + prog = xine + repeat = 3 + config = Number4 +end + +# enter the number 5 +begin + button = 5 + prog = xine + repeat = 3 + config = Number5 +end + +# enter the number 6 +begin + button = 6 + prog = xine + repeat = 3 + config = Number6 +end + +# enter the number 7 +begin + button = 7 + prog = xine + repeat = 3 + config = Number7 +end + +# enter the number 8 +begin + button = 8 + prog = xine + repeat = 3 + config = Number8 +end + +# enter the number 9 +begin + button = 9 + prog = xine + repeat = 3 + config = Number9 +end + +# quit the program +begin + button = POWER + prog = xine + repeat = 3 + config = Quit +end + +## +# End of xine key bindings. +## + diff --git a/abs/core-testing/system-templates/templates/remotes/One4All/preview.jpg b/abs/core-testing/system-templates/templates/remotes/One4All/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircd-one4all6131.conf b/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircd-one4all6131.conf new file mode 100755 index 0000000..9562f79 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircd-one4all6131.conf @@ -0,0 +1,31 @@ +begin remote + name OneForAll_6131 + bits 20 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + header 2449 542 + one 1259 527 + zero 675 527 + gap 45430 + + begin codes + Left 0xDEB92 + Right 0x3EB92 + Up 0x9EB92 + Down 0x5EB92 + Select 0xD0B92 + Exit 0x70B92 + Info 0x2AB92 + Guide 0x58B92 + Menu 0xD8B92 + Play 0x4CB92 + Pause 0x9CB92 + Stop 0x1CB92 + JumpBack 0x6CB92 + JumpAhead 0xECB92 + JumpToStart 0x0CB92 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircrc-one4all6131.txt b/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircrc-one4all6131.txt new file mode 100755 index 0000000..728c046 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_6131/lircrc-one4all6131.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = Up +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Down +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = Right +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = Left +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = Select +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = Exit +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Mute +begin +prog = mythtv +button = +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = JumpAhead +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = JumpBack +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = Menu +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Mute +begin +prog = mplayer +button = +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = JumpBack +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = JumpAhead +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Exit +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = Up +config = EventUp +end + +begin +prog = xine +button = Down +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = Select +config = EventSelect +end + +begin +prog = xine +button = Menu +config = Menu +end + +begin +prog = xine +button = JumpAhead +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = JumpBack +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = Right +config = Volume+ +end + +begin +prog = xine +button = Left +config = Volume- +end + +begin +prog = xine +button = +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = Info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_6131/preview.jpg b/abs/core-testing/system-templates/templates/remotes/One4All_6131/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_6131/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircd-one4all7544.conf b/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircd-one4all7544.conf new file mode 100755 index 0000000..c1787ef --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircd-one4all7544.conf @@ -0,0 +1,49 @@ +begin remote + name one4all_7544 + bits 12 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + header 2399 615 + one 1175 620 + zero 572 620 + gap 45451 + + begin codes + 1 0x01A + 2 0x81A + 3 0x41A + 4 0xC1A + 5 0x21A + 6 0xA1A + 7 0x61A + 8 0xE1A + 9 0x11A + 10 0x51A + 0 0x91A + av 0x55A + c+ 0x09A + c- 0x89A + exit 0x55A + ok 0x8BA + up 0x43A + down 0xC3A + left 0x47A + right 0x87A + v+ 0x49A + v- 0xC9A + mute 0xADA + rr 0xD9A + play 0x59A + pause 0x99A + ff 0x39A + red 0x1BA + green 0x19A + yellow 0xB9A + blue 0xE5A + menu 0xB3A + power 0xA9A + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircrc-one4all7544.txt b/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircrc-one4all7544.txt new file mode 100755 index 0000000..57e702a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_7544/lircrc-one4all7544.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = c+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = c- +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = v+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = v- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ok +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = exit +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = ff +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rr +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = red +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = yellow +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = menu +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = green +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = blue +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rr +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = ff +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = exit +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = exit +config = Stop +end + +begin +prog = xine +button = exit +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = ok +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = ff +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rr +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = v+ +config = Volume+ +end + +begin +prog = xine +button = v- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = exit +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = green +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_7544/preview.jpg b/abs/core-testing/system-templates/templates/remotes/One4All_7544/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_7544/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf b/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf new file mode 100755 index 0000000..504718b --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircd-one4all9910.conf @@ -0,0 +1,53 @@ +begin remote + name one4all_9910 + bits 24 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + header 4074 3901 + one 584 1909 + zero 584 909 + ptrail 589 + gap 64326 + + begin codes + 1 0x7318CE + 2 0x7328CD + 3 0x7338CC + 4 0x7348CB + 5 0x7358CA + 6 0x7368C9 + 7 0x7378C8 + 8 0x7388C7 + 9 0x7398C6 + 0 0x7308CF + enter 0x7F480B + tvvid 0x7A385C + rew 0x71D8E2 + play 0x7158EA + fwd 0x72D8D2 + rec 0x7178E8 + pause 0x7198E6 + frew 0x72C8D3 + stop 0x71F8E0 + ffwd 0x72D8D2 + pip 0x71B8E4 + swap 0x7C383C + fav 0x72D8D2 + ch- 0x72C8D3 + ch+ 0x72D8D2 + prev 0x7278D8 + left 0x7568A9 + up 0x7598A6 + down 0x7588A7 + right 0x7578A8 + select 0x7F480B + menu 0x7088F7 + guide 0x71A8E5 + exit 0x7068F9 + info 0x73C8C3 + power 0x72A8D5 + + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt b/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt new file mode 100755 index 0000000..ea40c6a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_9910/lircrc-one4all9910.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = select +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = exit +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = fwd +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rew +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = ffwd +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = frew +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = menu +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = prev +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = pip +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rew +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = fwd +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = ffwd +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = frew +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = enter +config = EventSelect +end + +begin +prog = xine +button = menu +config = Menu +end + +begin +prog = xine +button = ffwd +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = frew +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = ch+ +config = Volume+ +end + +begin +prog = xine +button = ch- +config = Volume- +end + +begin +prog = xine +button = +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = prev +config = EventPrior +end + +begin +prog = xine +button = info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/One4All_9910/preview.jpg b/abs/core-testing/system-templates/templates/remotes/One4All_9910/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/One4All_9910/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf new file mode 100755 index 0000000..9e0e783 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircd-packard.conf @@ -0,0 +1,92 @@ +# Config file for Packard Bell Remotes (with repeat codes!) +# created by Samuel Wood (sjw@umr.edu) +# +# brand: Packard Bell Remote +# model: El Cheapo Packard Bell Remote +# +# This is a config file for the cheap excess Packard Bell remotes +# you sometimes can buy from online auctions like www.onsale.com. +# +# The receiver that comes with it hooks into the serial port and works +# fine with lirc 0.5.4. +# +# The receiver that comes with the remote is near garbage. If +# you don't point almost directly at it, it will not detect. But +# it's simpler than building your own. :-) +# +# Repeat works fine for me. You just have to modify or add the +# "repeat=" lines in your .lircrc. +# +# irrecord was used to generate the file, then I modified and +# added repeat codes. +# +# The button names used are identical to what was printed on the +# remote, except for the number pads (using actual numbers like +# "1" and so forth did not seem to work. Similarly, '*' is Star +# and '#' is Hash. LMB and RMB refer to the two mousepad buttons +# on the left and right respectively. +# +# I still need to modify the gap setting. Right now, if you don't +# hold the button down long enough, it may not register, but if +# you hold it too long, it will detect a repeat or two. Feel free +# to modify this to work better. If you get it to work better, send +# me a copy. :-) + +begin remote + + name PackBell + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 400 + + header 9065 4500 + one 597 532 + zero 597 1643 + ptrail 597 + pre_data_bits 16 + pre_data 0xF708 + post_data_bits 1 + post_data 0x0 + gap 107000 + repeat_bit 0 + repeat 9050 2250 + + begin codes + Help 0x0000000000006F90 + Phone 0x0000000000004FB0 + Message 0x0000000000006E91 + SRS 0x0000000000004EB1 + CD 0x0000000000002FD0 + Aux1 0x0000000000000FF0 + Aux2 0x0000000000002ED1 + Aux3 0x0000000000000EF1 + LMB 0x00000000000023DC + RMB 0x000000000000639C + Up 0x00000000000037C8 + Down 0x00000000000057A8 + Left 0x0000000000007788 + Right 0x00000000000017E8 + Menu 0x0000000000007B84 + Mute 0x0000000000003BC4 + Enter 0x00000000000047B8 + CHUp 0x00000000000027D8 + CHDown 0x0000000000006798 + VolUp 0x0000000000005BA4 + VolDown 0x0000000000001BE4 + Display 0x00000000000007F8 + One 0x0000000000005EA1 + Two 0x0000000000001EE1 + Three 0x0000000000000BF4 + Four 0x0000000000007E81 + Five 0x0000000000003EC1 + Six 0x0000000000004BB4 + Seven 0x0000000000005FA0 + Eight 0x0000000000001FE0 + Nine 0x0000000000002BD4 + Zero 0x0000000000003FC0 + Star 0x0000000000007F80 + Hash 0x0000000000006B94 + end codes + +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt new file mode 100755 index 0000000..5e54f7a --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Packard_bell/lircrc-packard.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CHUp +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CHDown +config = Down +end + +# General Left +begin +prog = mythtv +button = Left +config = Left +end + +# General Right +begin +prog = mythtv +button = Right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VolUp +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VolDown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = Enter +config = Space +end + +# Play +begin +prog = mythtv +button = +config = Return +end + +# Stop +begin +prog = mythtv +button = +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Menu +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = Zero +config = 0 +end + +begin +prog = mythtv +button = One +config = 1 +end + +begin +prog = mythtv +button = Two +config = 2 +end + +begin +prog = mythtv +button = Three +config = 3 +end + +begin +prog = mythtv +button = Four +config = 4 +end + +begin +prog = mythtv +button = Five +config = 5 +end + +begin +prog = mythtv +button = Six +config = 6 +end + +begin +prog = mythtv +button = Seven +config = 7 +end + +begin +prog = mythtv +button = Eight +config = 8 +end + +begin +prog = mythtv +button = Nine +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Left +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = Right +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = +config = Play +end + +begin +prog = xine +button = +config = Stop +end + +begin +prog = xine +button = +config = Quit +end + +begin +prog = xine +button = +config = Pause +end + +begin +prog = xine +button = Up +config = EventUp +end + +begin +prog = xine +button = Down +config = EventDown +end + +begin +prog = xine +button = Left +config = EventLeft +end + +begin +prog = xine +button = Right +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = Menu +config = Menu +end + +begin +prog = xine +button = +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VolUp +config = Volume+ +end + +begin +prog = xine +button = VolDown +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = Help +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Packard_bell/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf new file mode 100755 index 0000000..ebc04d9 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircd-pinnacle.conf @@ -0,0 +1,97 @@ +# +# contributed by Bart Alewijnse <scarfboy@yahoo.com> +# +# brand: Pinnacle Systems +# model: PCTV Remote (Perhaps other ones as well) +# supported devices: there's only one I know of. (serial) +# +# Mail me if your remote is only partly supported, or if it has different +# buttons than listed below. +# + +begin remote + + name PinnacleSysPCTVRemote + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0xFE + gap 180000 + toggle_bit 0 + + begin codes + Mute 0xB53C #Mute 0x000000000000003C + Power 0x2D2F #Power 0x000000000000002F + Chan+Play 0x173F #Chan+Play 0x000000000000003F + Chan-Stop 0xC63E #Chan-Stop 0x000000000000003E + Vol+FF 0xF13B #Vol+FF 0x000000000000003B + Vol-Rew 0x643D #Vol-Rew 0x000000000000003D + 1 0x9F31 #1 0x0000000000000031 + 2 0x3D32 #2 0x0000000000000032 + 3 0xEC33 #3 0x0000000000000033 + 4 0xA834 #4 0x0000000000000034 + 5 0x7935 #5 0x0000000000000035 + 6 0xDB36 #6 0x0000000000000036 + 7 0x0A37 #7 0x0000000000000037 + 8 0x5338 #8 0x0000000000000038 + 9 0x8239 #9 0x0000000000000039 + Fullscreen 0x5E2D #Fullscreen 0x000000000000002D + 0/AV 0x203A #0/AV 0x000000000000003A + Info 0xCB2B #Info 0x000000000000002B + Preview 0xFC2E #Preview 0x000000000000002E + Record 0x3027 #Record 0x0000000000000027 + Chan_Last 0x4325 #Chan_Last 0x0000000000000025 + F_TV 0xE126 #F_TV 0x0000000000000026 + F_TELETEXT 0xB829 #F_TELETEXT 0x0000000000000029 + F_RADIO 0x1A2A #F_RADIO 0x000000000000002A + +# +# here are some extra buttons a new version of the remote seems to have +# +# contributed by Robbert Monna <rjmonna@kabelfoon.nl> +# +# brand: Pinnacle Systems +# model: PCTV Remote (newest version?) +# supported devices: dongle on serial port (from TV-Card) +# + L 0x631F #L 0x000000000000001F + Zoom 0xB21E #Zoom 0x000000000000001E + vol+ 0x851B #vol+ 0x000000000000001B + vol- 0x590F #vol- 0x000000000000000F + channel+ 0x7E17 #channel+ 0x0000000000000017 + channel- 0xC11C #channel- 0x000000000000001C + middle 0x541A #middle 0x000000000000001A + Menu 0x101D #Menu 0x000000000000001D + next 0xF619 #next 0x0000000000000019 + undo 0xAF16 #undo 0x0000000000000016 + pause 0x0D15 #pause 0x0000000000000015 + redo 0x9813 #redo 0x0000000000000013 + Rewind 0x880E #Rewind 0x000000000000000E + Play 0x2A0D #Play 0x000000000000000D + Stop 0xBF0B #Stop 0x000000000000000B + FForward 0x4407 #FForward 0x0000000000000007 + EPG 0x2718 #EPG 0x0000000000000018 + +# here are some more buttons that seem to be mapped differently from +# the ones above + +# contributed by InterCeptor ceptor_7@freemail.hu +# +# brand: Pinnacle Systems PCTV Pro Remote +# model no. of remote control: (I can't find any numbers on it) +# supported devices: serial +# + + 9 0x0000000000000082 + Zoom 0x00000000000000B2 + middle 0x0000000000000014 + + + end codes +end remote + + diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt new file mode 100755 index 0000000..d3b9261 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Pinnacle/lircrc-pinnacle.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = channel+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = channel- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = channel+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = channel- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = undo +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FForward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Vol+FF +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Vol-Rew +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = Menu +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = EPG +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = Chan_Last +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = F_TELETEXT +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = Fullscreen +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FForward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Vol+FF +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Vol-Rew +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = Fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = channel+ +config = EventUp +end + +begin +prog = xine +button = channel- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = Menu +config = Menu +end + +begin +prog = xine +button = FForward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = next +config = EventNext +end + +begin +prog = xine +button = undo +config = EventPrior +end + +begin +prog = xine +button = Info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Pinnacle/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Provideo/lircd-provideo.conf b/abs/core-testing/system-templates/templates/remotes/Provideo/lircd-provideo.conf new file mode 100755 index 0000000..d20ad85 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Provideo/lircd-provideo.conf @@ -0,0 +1,52 @@ +begin remote + + name PV951 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9067 4482 + one 597 1650 + zero 597 529 + ptrail 584 + repeat 9068 2232 + pre_data_bits 16 + pre_data 0x61D6 + gap 107983 + repeat_bit 0 + + begin codes + power 0x00000000000048B7 + air/cbl 0x000000000000D02F + pc/tv 0x0000000000008877 + source 0x000000000000F00F + mts 0x000000000000C837 + mute 0x00000000000008F7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + 0 0x00000000000000FF + +100 0x00000000000050AF + ch_rtn 0x000000000000E817 + ch+ 0x00000000000058A7 + ch- 0x0000000000007887 + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + func 0x0000000000009867 + ttx 0x000000000000B04F + pg+ 0x000000000000708F + pg- 0x000000000000B847 + cc 0x0000000000006897 + sync 0x00000000000028D7 + ch+- 0x00000000000018E7 + autoscan 0x00000000000030CF + end codes + +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Provideo/lircrc-provideo.txt b/abs/core-testing/system-templates/templates/remotes/Provideo/lircrc-provideo.txt new file mode 100755 index 0000000..90972b6 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Provideo/lircrc-provideo.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = pg+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = pg- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = +config = Return +end + +# Stop +begin +prog = mythtv +button = +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = func +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = ch_rtn +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = cc +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = func +config = osd +end + +# Pause playback +begin +prog = mplayer +button = +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = +config = Play +end + +begin +prog = xine +button = +config = Stop +end + +begin +prog = xine +button = +config = Quit +end + +begin +prog = xine +button = +config = Pause +end + +begin +prog = xine +button = ch+ +config = EventUp +end + +begin +prog = xine +button = ch- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = +config = Menu +end + +begin +prog = xine +button = pg+ +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = pg- +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = ch_rtn +config = EventPrior +end + +begin +prog = xine +button = ttx +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Provideo/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Provideo/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Provideo/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Sasem/lircd-sasem.conf b/abs/core-testing/system-templates/templates/remotes/Sasem/lircd-sasem.conf new file mode 100755 index 0000000..25d6521 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Sasem/lircd-sasem.conf @@ -0,0 +1,81 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 +# +# contributed by Oliver Stabel (oliver.stabel@gmx.de) +# +# brand: Sasem OnAir +# model no. of remote control: n/a +# devices being controlled by this remote: +# This IR came with the Dign HV5 HTPC case, manufactured +# by Uneed in Korea (www.iuneed.com). +# AFAIK the case is called Ahanix HV5 in the US. +# The IR/VFD device is originally manufactured by Sasem, +# and sold as OnAir Remocon-V (?looks different from +# mine but should be the same?) +# + +begin remote + + name sasem + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 24 + pre_data 0x0C807F + post_data_bits 24 + post_data 0x000000 + gap 196000 + toggle_bit 0 + + + begin codes + 1 0x08F7 + 2 0x09F6 + 3 0x0AF5 + 4 0x10EF + 5 0x11EE + 6 0x12ED + 7 0x18E7 + 8 0x19E6 + 9 0x1AE5 + start 0x40BF + 0 0x41BE + full_down 0x06F9 + vol- 0x0FF0 + vol+ 0x0EF1 + esc 0x05FA + up 0x0BF4 + close 0x07F8 + left 0x03FC + enter 0x13EC + right 0x1BE4 + prev 0x0CF3 + down 0x43BC + next 0x01FE + mute 0x0DF2 + step 0x04FB + play_pause 0x49B6 + stop 0x48B7 + winamp 0x1EE1 + media_player 0x15EA + hdtv 0x17E8 + cd_player 0x16E9 + win_dvd 0x44BB + power_dvd 0x14EB + internet 0x46B9 + email 0x47B8 + a 0x45BA + b 0x1DE2 + c 0x1CE3 + d 0x1FE0 + eject 0x02FD + power 0x00FF + end codes + +end remote + + diff --git a/abs/core-testing/system-templates/templates/remotes/Sasem/lircrc-sasem.txt b/abs/core-testing/system-templates/templates/remotes/Sasem/lircrc-sasem.txt new file mode 100755 index 0000000..9d73415 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Sasem/lircrc-sasem.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = up +config = Up +end + +# Channel Down +begin +prog = mythtv +button = down +config = Down +end + +# General Left +begin +prog = mythtv +button = left +config = Left +end + +# General Right +begin +prog = mythtv +button = right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = enter +config = Space +end + +# Play +begin +prog = mythtv +button = play_pause +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = esc +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = play_pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = next +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = prev +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = +config = osd +end + +# Pause playback +begin +prog = mplayer +button = play_pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = prev +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = next +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = full_down +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play_pause +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = esc +config = Quit +end + +begin +prog = xine +button = play_pause +config = Pause +end + +begin +prog = xine +button = up +config = EventUp +end + +begin +prog = xine +button = down +config = EventDown +end + +begin +prog = xine +button = left +config = EventLeft +end + +begin +prog = xine +button = right +config = EventRight +end + +begin +prog = xine +button = enter +config = EventSelect +end + +begin +prog = xine +button = +config = Menu +end + +begin +prog = xine +button = next +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = prev +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Sasem/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Sasem/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Sasem/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Technisat/lircd-technisat.conf b/abs/core-testing/system-templates/templates/remotes/Technisat/lircd-technisat.conf new file mode 100755 index 0000000..3f0f3d4 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Technisat/lircd-technisat.conf @@ -0,0 +1,68 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Sun Mar 27 11:39:40 2005 +# +# contributed by +# +# brand: +# model no. of remote control: TS35 - Airstar2 +# devices being controlled by this remote: DVB-T +# + +begin remote + + name technisat + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 907 885 + zero 907 885 + plead 954 + gap 113935 + toggle_bit 2 + + + begin codes + 1 0x0000000000001A81 + 2 0x0000000000001A82 + 3 0x0000000000001283 + 4 0x0000000000001284 + 5 0x0000000000001A85 + 6 0x0000000000001286 + 7 0x0000000000001A87 + 8 0x0000000000001288 + 9 0x0000000000001A89 + 0 0x0000000000001A80 + Mute 0x000000000000128D + Ext 0x0000000000001AB8 + a/b 0x00000000000012A3 + Power 0x0000000000001A8C + tv/radio 0x0000000000000293 + -/-- 0x0000000000001A8A + Menu 0x0000000000000292 + Back 0x0000000000000A8F + Up 0x0000000000001AA0 + Down 0x00000000000012A1 + Left 0x0000000000001A91 + Right 0x0000000000001A90 + Sfi 0x0000000000001AAF + Repeat 0x0000000000001AA2 + Red 0x00000000000002AB + Green 0x0000000000000AAC + Yellow 0x0000000000000AAD + Blue 0x0000000000000AAE + Ok 0x0000000000000297 + Check 0x00000000000002B6 + txt 0x0000000000001ABC + stop 0x00000000000012A9 + help 0x0000000000001A8F + tv/radio 0x0000000000000A93 + end codes + +end remote + + diff --git a/abs/core-testing/system-templates/templates/remotes/Technisat/lircrc-technisat.txt b/abs/core-testing/system-templates/templates/remotes/Technisat/lircrc-technisat.txt new file mode 100755 index 0000000..8baa6b9 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Technisat/lircrc-technisat.txt @@ -0,0 +1,347 @@ +begin + prog = mythtv + button = Up + config = Up +end + +begin + prog = mythtv + button = Down + config = Down +end + +begin + prog = mythtv + button = Left + config = Left +end + +begin + prog = mythtv + button = Right + config = Right +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = Menu + config = M +end + +begin + prog = mythtv + button = Repeat + config = H +end + +begin + prog = mythtv + button = Check + config = / +end + +begin + prog = mythtv + button = help + config = T +end + + +begin + prog = mythtv +# This is the Red key +# We'll use it for "Delete" + button = Red + config = D +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "Information" + button = Green + config = I +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "View details" + button = Yellow + config = U +end + +begin + prog = mythtv +# This is the Green key +# We'll use it for "Upcoming episodes" + button = Blue + config = O +end + + +# Note the "repeat =" strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +begin + prog = mythtv + button = Left + repeat = 3 + config = F10 +end + +begin + prog = mythtv + button = Right + repeat = 3 + config = F11 +end + +begin + prog = mythtv +# Middle button on the diamond + button = Ok + config = P +end + +begin + prog = mythtv + button = Mute + config = | +end + +begin + prog = mythtv + button = back + config = Esc +end + + +begin + prog = mythtv + button = stop + config = Esc +end + + +#MPlayer +begin + prog = mplayer + button = stop + config = quit +end + +begin + prog = mplayer + button = help + config = osd +end + +begin + prog = mplayer + button = Ok + config = play +end + + + +begin + prog = mplayer + button = Ok + config = pause +end + +begin + prog = mplayer + button = Right + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = Left + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = Mute + config = mute +end +##XINE + + begin + prog = xine + button = Ok + repeat = 3 + config = Play + end + + begin + prog = xine + button = stop + repeat = 3 + config = Stop + end + + begin + prog = xine + button = Back + config = Quit + end + + begin + prog = xine + button = Ok + repeat = 3 + config = Pause + end + + begin + prog = xine + button = Up + repeat = 4 + config = EventUp + end + + begin + prog = xine + button = Down + repeat = 4 + config = EventDown + end + + begin + prog = xine + button = Left + repeat = 4 + config = Volume- + end + + begin + prog = xine + button = Right + repeat = 4 + config = Volume+ + end + + begin + prog = xine + button = Ok + repeat = 0 + config = EventSelect + end + + begin + prog = xine + button = Menu + repeat = 0 + config = Menu + end + + #vol down + begin + prog = xine + button = Yellow + repeat = 1 + config = EventLeft + end + + #vol up + begin + prog = xine + button = Red + repeat = 1 + config = EventRight + end + + + #ch up + begin + prog = xine + button = Green + repeat = 1 + config = SeekRelative+60 + end + + #ch down + begin + prog = xine + button = Blue + repeat = 1 + config = SeekRelative-60 + end + + + #skip chapter backward + begin + prog = xine + button = Repeat + repeat = 1 + config = EventPrior + end diff --git a/abs/core-testing/system-templates/templates/remotes/Technisat/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Technisat/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Technisat/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Tekram/lircd-tekram.conf b/abs/core-testing/system-templates/templates/remotes/Tekram/lircd-tekram.conf new file mode 100755 index 0000000..90ae8f8 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Tekram/lircd-tekram.conf @@ -0,0 +1,48 @@ +# +# This is for the remote that Tekram bundles with its M230 card (Mach64) +# Commands from the remote are hardware-decoded +# +# contributed by Froenchenko Leonid <lfroen@galileo.co.il> +# +# brand: Tekram M230 (ATI Mach64) +# supported devices: This remote control comes with TV Tuner cards from +# Tekram based on ATI 264VT (btt829) +# + +begin remote + name tekram_m230 + bits 8 + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + RECALL 0x0A + ENTER 0x17 + POWER 0x1C + SOURCE 0x15 + PC_VID 0x12 + STILL 0x11 + TTX 0x0F + FAV 0x13 + MUTE 0x10 + VOL_UP 0x1A + VOL_DN 0x1E + CH_UP 0x1B + CH_DN 0x1F + PLAY 0x0D + STOP 0x0E + REW 0x1D + FFW 0x19 + ADD_ER 0x16 + FUNC 0x14 + F_PLUS 0x18 + F_MINUS 0x0C + end codes +end remote diff --git a/abs/core-testing/system-templates/templates/remotes/Tekram/lircrc-tekram.txt b/abs/core-testing/system-templates/templates/remotes/Tekram/lircrc-tekram.txt new file mode 100755 index 0000000..6226f3d --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Tekram/lircrc-tekram.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = CH_UP +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH_DN +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = CH_UP +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = CH_DN +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VOL_UP +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VOL_DN +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = ENTER +config = Space +end + +# Play +begin +prog = mythtv +button = PLAY +config = Return +end + +# Stop +begin +prog = mythtv +button = STOP +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = POWER +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = STILL +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FFW +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = REW +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = F_PLUS +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = F_MINUS +config = PgUp +end + +# Record +begin +prog = mythtv +button = FUNC +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = SOURCE +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = FAV +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = PC_VID +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = RECALL +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = TTX +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = FAV +config = osd +end + +# Pause playback +begin +prog = mplayer +button = STILL +config = pause +end + +# Mute +begin +prog = mplayer +button = MUTE +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = REW +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FFW +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = STOP +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = F_PLUS +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = F_MINUS +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = SOURCE +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = STOP +config = Quit +end + +begin +prog = xine +button = STILL +config = Pause +end + +begin +prog = xine +button = CH_UP +config = EventUp +end + +begin +prog = xine +button = CH_DN +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = ENTER +config = EventSelect +end + +begin +prog = xine +button = SOURCE +config = Menu +end + +begin +prog = xine +button = FFW +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = REW +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +config = Volume+ +end + +begin +prog = xine +button = VOL_DN +config = Volume- +end + +begin +prog = xine +button = MUTE +config = Mute +end + +begin +prog = xine +button = STOP +config = RootMenu +end + +begin +prog = xine +button = F_PLUS +config = EventNext +end + +begin +prog = xine +button = F_MINUS +config = EventPrior +end + +begin +prog = xine +button = TTX +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Tekram/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Tekram/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Tekram/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/Twinham/lircd-twinhan.conf b/abs/core-testing/system-templates/templates/remotes/Twinham/lircd-twinhan.conf new file mode 100755 index 0000000..3fb3652 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Twinham/lircd-twinhan.conf @@ -0,0 +1,44 @@ +begin remote + name TwinHanRemote + bits 32 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 115899 + toggle_bit 0 + begin codes + fullscreen 0x8001002C + Power 0x8001001D + 1 0x80010002 + 2 0x80010003 + 3 0x80010004 + 4 0x80010005 + 5 0x80010006 + 6 0x80010007 + 7 0x80010008 + 8 0x80010009 + 9 0x8001000A + 0 0x8001000B + rec 0x80010066 + favorite 0x8001002F + rewind 0x80010017 + forward 0x80010031 + ch+ 0x80010068 + ch- 0x8001006D + vol- 0x8001006C + vol+ 0x80010067 + recall 0x8001002E + play 0x8001001C + stop 0x8001006B + pause 0x80010014 + mute 0x80010032 + cancel 0x80010001 + capture 0x80010019 + preview 0x80010025 + epg 0x80010012 + recordlist 0x80010026 + tab 0x8001000F + teletext 0x8001001E + end codes +end remote
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Twinham/lircrc-twinhan.txt b/abs/core-testing/system-templates/templates/remotes/Twinham/lircrc-twinhan.txt new file mode 100755 index 0000000..296876c --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Twinham/lircrc-twinhan.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ch+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ch- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = ch+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = ch- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = play +config = Return +end + +# Stop +begin +prog = mythtv +button = stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = forward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = +config = PgUp +end + +# Record +begin +prog = mythtv +button = rec +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = epg +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = preview +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = recall +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = teletext +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = epg +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = forward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = play +config = Play +end + +begin +prog = xine +button = stop +config = Stop +end + +begin +prog = xine +button = stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = ch+ +config = EventUp +end + +begin +prog = xine +button = ch- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = epg +config = Menu +end + +begin +prog = xine +button = forward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = mute +config = Mute +end + +begin +prog = xine +button = stop +config = RootMenu +end + +begin +prog = xine +button = +config = EventNext +end + +begin +prog = xine +button = +config = EventPrior +end + +begin +prog = xine +button = teletext +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/Twinham/preview.jpg b/abs/core-testing/system-templates/templates/remotes/Twinham/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/Twinham/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircd-x10lola.conf b/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircd-x10lola.conf new file mode 100755 index 0000000..7bfad44 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircd-x10lola.conf @@ -0,0 +1,78 @@ +# lircd.conf for X-10 Lola remote +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 +# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc +# +# +# brand: X-10 Lola +# model no. of remote control: UR89A +# devices being controlled by this remote: mythtv +# + +begin remote + + name x10_lola + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 219972 + toggle_bit 0 + + + begin codes + up 0x000000000000600B + down 0x000000000000610C + left 0x0000000000005D08 + right 0x0000000000005E09 + M 0x0000000000005F0A + 1 0x000000000000620D + 2 0x000000000000630E + 3 0x000000000000640F + 4 0x0000000000006510 + 5 0x0000000000006611 + 6 0x0000000000006712 + 7 0x0000000000006813 + 8 0x0000000000006914 + 9 0x0000000000006A15 + 0 0x0000000000006C17 + a-d 0x0000000000006B16 + a-b 0x0000000000006D18 + pageup 0x000000000000711C + pagedown 0x0000000000007520 + T 0x000000000000832E + E 0x000000000000842F + F 0x0000000000005C07 + S 0x0000000000008530 + scan- 0x000000000000802B + rew 0x0000000000007924 + play 0x0000000000007A25 + ff 0x0000000000007B26 + scan+ 0x0000000000007F2A + rec 0x0000000000007C27 + stop 0x0000000000007D28 + pause 0x0000000000007E29 + playlist 0x0000000000005601 + playing 0x000000000000822D + enter 0x000000000000731E + eu 0x0000000000006F1A + ed 0x0000000000007722 + el 0x000000000000721D + er 0x000000000000741F + alb 0x0000000000006E19 + art 0x000000000000701B + gen 0x0000000000007621 + trk 0x0000000000007823 + end codes + +end remote + + diff --git a/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircrc-x10lola.txt b/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircrc-x10lola.txt new file mode 100755 index 0000000..5fc949e --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/X10_Lola/lircrc-x10lola.txt @@ -0,0 +1,334 @@ +# lircrc +# lircrc configuration file for X-10 Lola remote for use with MythTV +# for use with keymapping at http://wendy.seltzer.org/mythtv/lircd.conf +# common keymappings from the keys.txt suggestions +# +# This file is public domain. No rights reserved. + +###number keys +begin + prog = mythtv + button = 0 + config = 0 +end +begin + prog = mythtv + button = 1 + config = 1 +end +begin + prog = mythtv + button = 2 + config = 2 +end +begin + prog = mythtv + button = 3 + config = 3 +end +begin + prog = mythtv + button = 4 + config = 4 +end +begin + prog = mythtv + button = 5 + config = 5 +end +begin + prog = mythtv + button = 0 + config = 0 +end +begin + prog = mythtv + button = 6 + config = 6 +end +begin + prog = mythtv + button = 7 + config = 7 +end +begin + prog = mythtv + button = 8 + config = 8 +end +begin + prog = mythtv + button = 9 + config = 9 +end + +##arrows +begin + prog = mythtv + button = play + config = Space +end + +### arrows with the multibutton +begin + prog = mythtv + button = eu + config = Up +end +begin + prog = mythtv + button = ed + config = Down +end +begin + prog = mythtv + button = el + config = Left +end +begin + prog = mythtv + button = er + config = Right +end +begin + prog = mythtv + button = enter + config = Space +end +begin + prog = mythtv + button = stop + config = Escape +end +begin + prog = mythtv + button = alb + config = m +end +begin + prog = mythtv + button = art + config = e +end +begin + prog = mythtv + button = gen + config = i +end +begin + prog = mythtv + button = trk + config = y +end +begin + prog = mythtv + button = rec + config = r +end + +begin + prog = mythtv + button = pause + config = p +end + +begin + prog = mythtv + button = T + config = t +end + +begin + prog = mythtv + button = E + config = u +end + +begin + prog = mythtv + button = S + config = a +end + +begin + prog = mythtv + button = F + config = + +end + +begin + prog = mythtv + button = playing + config = s +end + +begin + prog=mythtv + button = playlist + config = w +end + +begin + prog = mythtv + button = a-d + config = d +end + +begin + prog = mythtv + button = a-b + config = b +end +##Volume (with pageup) +begin + prog=mythtv + button = pageup + config = Page Up +end +begin + prog=mythtv + button = pagedown + config = Page Down +end + +begin + prog=mythtv + button = ch+ + config = ] +end + +begin + prog=mythtv + button = ch- + config = [ +end + +begin + prog=mythtv + button = vol- + config = q +end + +begin + prog=mythtv + button = vol+ + config = z +end + +begin + prog=mythtv + button = ff + config = > +end + +begin + prog=mythtv + button = rew + config = < +end + +begin + prog=mythtv + button = scan+ + config = } +end + +begin + prog=mythtv + button = scan- + config = { +end + + +##mplayer +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = alb +repeat = 3 +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +repeat = 3 +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = play +repeat = 3 +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = stop +repeat = 3 +config = quit +end + +# Mute +begin +prog = mplayer +button = +repeat = 3 +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = rew +repeat = 3 +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = ff +repeat = 3 +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = E +repeat = 3 +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = vol+ +repeat = 3 +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = vol- +repeat = 3 +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = playlist +repeat = 3 +config = vo_fullscreen +end + diff --git a/abs/core-testing/system-templates/templates/remotes/X10_Lola/preview.jpg b/abs/core-testing/system-templates/templates/remotes/X10_Lola/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/X10_Lola/preview.jpg diff --git a/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf new file mode 100755 index 0000000..edc97f5 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircd-snapstreammini.conf @@ -0,0 +1,70 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Sat Sep 09 22:22:16 2006 +# +# contributed by David Salisbury +# +# brand: SnapStream +# model: Firefly-Mini +# supported devices: +# + +begin remote + + name SnapStream_Firefly-Mini + bits 16 + flags SPACE_ENC + eps 25 + aeps 100 + + header 9052 4475 + one 627 1623 + zero 627 496 + ptrail 627 + repeat 9081 2206 + pre_data_bits 16 + pre_data 0xFF + gap 39962 + toggle_bit 0 + + + begin codes + Close 0xC23D + Mute 0xE21D + 1 0xD22D + 2 0xF20D + 3 0xCA35 + 4 0xEA15 + 5 0xDA25 + 6 0xFA05 + 7 0x827D + 8 0xA25D + 9 0x926D + 0 0x8A75 + VolumeUp 0xB24D + VolumeDown 0x9A65 + ChannelUp 0xAA55 + ChannelDown 0x02FD + Up 0xBA45 + Down 0x0AF5 + Left 0x22DD + Right 0x32CD + OK 0x12ED + Last 0x2AD5 + Exit 0x1AE5 + Option 0x3AC5 + Firefly 0xC03F + Menu 0xE01F + Record 0xD02F + Guide 0xF00F + Stop 0xC837 + Previous 0xE817 + Play 0xD827 + Next 0xF807 + Rewind 0x40BF + Pause 0x609F + FastForward 0x50AF + end codes + +end remote + diff --git a/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt new file mode 100755 index 0000000..4c557a2 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/lircrc-snapstreammini.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = ChannelUp +config = Up +end + +# Channel Down +begin +prog = mythtv +button = ChannelDown +config = Down +end + +# General Left +begin +prog = mythtv +button = Left +config = Left +end + +# General Right +begin +prog = mythtv +button = Right +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = Up +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = Down +config = Down +end + +# Volume Up +begin +prog = mythtv +button = VolumeUp +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = VolumeDown +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = OK +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = Exit +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Firefly +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = Pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FastForward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Next +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Previous +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Guide +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = Option +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = Last +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = Close +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Guide +config = osd +end + +# Pause playback +begin +prog = mplayer +button = Pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FastForward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Next +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Previous +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Exit +config = Quit +end + +begin +prog = xine +button = Pause +config = Pause +end + +begin +prog = xine +button = Up +config = EventUp +end + +begin +prog = xine +button = Down +config = EventDown +end + +begin +prog = xine +button = Left +config = EventLeft +end + +begin +prog = xine +button = Right +config = EventRight +end + +begin +prog = xine +button = OK +config = EventSelect +end + +begin +prog = xine +button = Guide +config = Menu +end + +begin +prog = xine +button = FastForward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VolumeUp +config = Volume+ +end + +begin +prog = xine +button = VolumeDown +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = Next +config = EventNext +end + +begin +prog = xine +button = Previous +config = EventPrior +end + +begin +prog = xine +button = Firefly +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/abs/core-testing/system-templates/templates/remotes/snapstream_mini/preview.jpg b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/preview.jpg Binary files differnew file mode 100644 index 0000000..a034186 --- /dev/null +++ b/abs/core-testing/system-templates/templates/remotes/snapstream_mini/preview.jpg diff --git a/abs/core-testing/tweaker/PKGBUILD b/abs/core-testing/tweaker/PKGBUILD index d5b9f7a..67bfb3d 100644 --- a/abs/core-testing/tweaker/PKGBUILD +++ b/abs/core-testing/tweaker/PKGBUILD @@ -1,6 +1,6 @@ pkgname=tweaker pkgver=1 -pkgrel=45 +pkgrel=46 pkgdesc="applies tweaks to the baseline configuration and attempts to optimize settings for the hardware it finds" arch=('i686' 'x86_64') diff --git a/abs/extra-testing/gnuplot/PKGBUILD b/abs/extra-testing/gnuplot/PKGBUILD new file mode 100644 index 0000000..24a801a --- /dev/null +++ b/abs/extra-testing/gnuplot/PKGBUILD @@ -0,0 +1,34 @@ +# $Id$ +# Maintainer: damir <damir@archlinux.org> +# Contributor: Niklas Volbers <mithrandir42@web.de> + +pkgname=gnuplot +pkgver=4.0.0 +pkgrel=1 +pkgdesc="Command-line driven interactive data and function plotting utility" +url="http://www.gnuplot.info" +depends=('gd>=2.0.29' 'wxgtk') +makedepends=('texinfo') +license='custom' +arch=('i686') +source=(http://downloads.sourceforge.net/project/$pkgname/$pkgname/$pkgver/$pkgname-$pkgver.tar.gz) +md5sums=(66258443d9f93cc4f46b147dac33e63a) + +build() { + cd $startdir/src/$pkgname-$pkgver + + ./configure --prefix=/usr \ + --datadir=/usr/share \ + --libexecdir=/usr/bin \ + --with-readline=gnu \ + --enable-history-file \ + --with-x + + make X11_DRIVER_DIR='/usr/bin' || return 1 + + make DESTDIR=$startdir/pkg \ + libexecdir=/usr/bin \ + pkglibexecdir=/usr/bin install + + install -D $startdir/src/$pkgname-$pkgver/Copyright $startdir/pkg/usr/share/licenses/custom/gnuplot/Copyright +} diff --git a/abs/extra-testing/graphload/PKGBUILD b/abs/extra-testing/graphload/PKGBUILD new file mode 100644 index 0000000..4fa0e66 --- /dev/null +++ b/abs/extra-testing/graphload/PKGBUILD @@ -0,0 +1,16 @@ +pkgname=graphload +pkgver=1 +pkgrel=1 +pkgdesc="command to graph the total CPU utilization for N-core systems for a given interval" +depends=('gnuplot>=4.0.0') +license='GPLv2' +arch=('i686') + +build() { + LH_ROOT=/usr/LH + mkdir -p $startdir/pkg/$LH_ROOT/bin/ + + cd $startdir + # executables + install -m0755 -D graphload.sh $startdir/pkg/$LH_ROOT/bin/ +} diff --git a/abs/extra-testing/graphload/graphload.sh b/abs/extra-testing/graphload/graphload.sh new file mode 100755 index 0000000..79023ec --- /dev/null +++ b/abs/extra-testing/graphload/graphload.sh @@ -0,0 +1,17 @@ +#!/bin/sh + +MYTICKS=100 +MYINTERVAL=4 # we sample once every $MYINTERVAL seconds +MYINVERSEINTERVAL=0.25 + +top -d $MYINVERSEINTERVAL -n $MYTICKS -b -i | grep Cpu | perl -e "while(<>) { split(','); \$load = 100 - substr @_[3], 0, -3; print \$load,\"\n\";}" > profile +perl -e '$second=0; while(<>) { chop(); $load = $_; print "$second $load "; split " ", $load; print @_[0] + @_[1], "\n"; $second+=0.25;}' < profile > points +echo "set grid +set xrange [0: $(($MYTICKS/$MYINTERVAL))] +set yrange [0: 101] +set xtics 0,$MYINVERSEINTERVAL,$(($MYTICKS/$MYINTERVAL)) +set xlabel \"time\" +set ylabel \"CPU usage\" +plot \"points\" using 1:2 with lines title 'total load' +replot" > gplot.cmds +gnuplot -persist gplot.cmds |
