diff options
Diffstat (limited to 'linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2')
4 files changed, 514 insertions, 0 deletions
diff --git a/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircd.conf.dvico-dual-digital4 b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircd.conf.dvico-dual-digital4 new file mode 100644 index 0000000..2d2b9ac --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircd.conf.dvico-dual-digital4 @@ -0,0 +1,81 @@ +# Please make this file available to others +# by sending it to <lirc@bartelmus.de> +# +# this config file was automatically generated +# using lirc-0.8.0(userspace) on Mon Mar 5 16:00:35 2007 +# +# contributed by: Soth +# +# brand: DViCO FusionHDTV DVB-T Dual Digital +# model no. of remote control: Fusion MCE +# devices being controlled by this remote: +# + +begin remote + + name DViCO_Dual_Digital + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x1 + gap 251756 + toggle_bit 0 + + begin codes +#starting at the top + dtv 0x0179 + mp3 0x0187 + dvd 0x0185 + cpf 0x016C +#outer circle clockwise from top + tvpower 0x0164 + guide 0x016D + info 0x0166 + alttab 0x000F + skip 0x00A3 + start 0x001C + replay 0x00A5 + dvdmenu 0x008B + back 0x009E + setup 0x008D +#inner circle + up 0x0067 + down 0x006C + left 0x0069 + right 0x006A + ok 0x0160 +#volume and channel + voldn 0x0072 + volup 0x0073 + chup 0x0192 + chdn 0x0193 +#keypad + camera 0x00D4 + live 0x0182 + folder 0x0086 + 1 0x0002 + 2 0x0003 + 3 0x0004 + 4 0x0005 + 5 0x0006 + 6 0x0007 + 7 0x0008 + 8 0x0009 + 9 0x000A + aspect 0x0173 + 0 0x000B + zoom 0x0174 +#play buttons + rew 0x00A8 + playpause 0x00A4 + ff 0x00D0 + mute 0x0071 + stop 0x0080 + rec 0x00A7 + power 0x0074 + end codes +end remote diff --git a/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircrc.dvico-dual-digital4 b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircrc.dvico-dual-digital4 new file mode 100644 index 0000000..7c75f01 --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/lircrc.dvico-dual-digital4 @@ -0,0 +1,430 @@ +# lircrc.example.DVICO-nativelirc +# 2004-07-04, Chris Pascoe +# mailto:linuxdvb@itee.uq.edu.au +# Save this file in ~/.mythtv/lircrc +# +# Note the "repeat =" strings in the volume and channel. +# This means that if you hold down the key, every nth instance will be +# passed. This depends on your system, so you may want to increase or +# decrease this and see what happens. repeat = 1 is probably too +# fast. + +### Top 4 buttons ### + +# DTV - Change focus for PiP (to change channel in the other window) +begin + prog = mythtv + button = dtv + config = B +end + +begin + prog = mythtv + button = mp3 + config = Ctrl+M +end + +begin + prog = mythtv + button = dvd + config = Ctrl+D +end + +begin + prog = mythtv + button = cpf + config = +end + +### Outer Circle (clockwise from the top) ### + +begin + prog = mythtv + button = tvpower + config = Esc +end + +begin + prog = mythtv + button = guide + config = S +end + +begin + prog = mythtv + button = info + config = I +end + +#swap the pip windows +begin + prog = mythtv + button = alttab + config = N +end + +#commercial skip forwards +begin + prog = mythtv + button = skip + config = Z +end + +begin + prog = mythtv + button = start + config = Return +end + +#commercial skip backwards +begin + prog = mythtv + button = replay + config = Q +end + +begin + prog = mythtv + button = dvdmenu +# config = undefined +end + +begin + prog = mythtv + button = back + config = Esc +end + +begin + prog = mythtv + button = setup + config = undefined +end + +### Inner Circle ### + +begin + prog = mythtv + button = up + config = Up +end + +begin + prog = mythtv + button = down + config = Down +end + +begin + prog = mythtv + button = left + config = Left +end + +begin + prog = mythtv + button = right + config = Right +end + +begin + prog = mythtv + button = ok + config = Return +end + +### Volume and Channel ### + +begin + prog = mythtv + button = voldn + repeat = 1 + config = F10 +end + +begin + prog = mythtv + button = volup + repeat = 1 + config = F11 +end + +begin + prog = mythtv + button = chup + config = Up +end + +begin + prog = mythtv + button = chdn + config = Down +end + +### Keypad ### + +begin + prog = mythtv + button = camera + config = P +end + +begin + prog = mythtv + button = live +# config = undefined +end + +begin + prog = mythtv + button = folder + config = C +end + +begin + prog = mythtv + button = 1 + config = 1 + config = return +end + +begin + prog = mythtv + button = 2 + config = 2 + config = return +end + +begin + prog = mythtv + button = 3 + config = 3 + config = return +end + +begin + prog = mythtv + button = 4 + config = 4 + config = return +end + +begin + prog = mythtv + button = 5 + config = 5 + config = return +end + +begin + prog = mythtv + button = 6 + config = 6 + config = return +end + +begin + prog = mythtv + button = 7 + config = 7 + config = return +end + +begin + prog = mythtv + button = 8 + config = 8 + config = return +end + +begin + prog = mythtv + button = 9 + config = 9 + config = return +end + +begin + prog = mythtv + button = aspect + config = W +end + +begin + prog = mythtv + button = 0 + config = 0 + config = return +end + +# Toggle PiP on/off +begin + prog = mythtv + button = zoom + config = V +end + +### Play buttons ### + +begin + prog = mythtv + button = rew + config = Left +# config = seek -180 +end + +begin + prog = mythtv + button = playpause + config = ctrl+p +end + +begin + prog = mythtv + button = ff + config = Right +# config = seek +180 +end + +begin + prog = mythtv + button = mute + config = | +end + +begin + prog = mythtv + button = stop + config = P +end + +begin + prog = mythtv + button = rec + config = R +end + +begin + prog = mythtv + button = power + config = Esc +end + +# Xine + +begin + prog = xine + button = playpause + repeat = 3 + config = Play +end + +begin + prog = xine + button = stop + repeat = 3 + config = Pause +end + +begin + prog = xine + button = back + config = Quit +end + +begin + prog = xine + button = tv_onoff + config = Quit +end + +begin + prog = xine + button = right + repeat = 3 + config = SeekRelative+10 +end + +begin + prog = xine + button = left + repeat = 3 + config = SeekRelative-10 +end + +begin + prog = xine + button = ff + repeat = 3 + config = SeekRelative+30 +end + +begin + prog = xine + button = rew + repeat = 3 + config = SeekRelative-30 +end + +begin + prog = xine + button = skip + repeat = 3 + config = SeekRelative+300 +end + +begin + prog = xine + button = replay + repeat = 3 + config = SeekRelative-300 +end + +begin + prog = xine + button = up + repeat = 1 + config = EventUp +end + +begin + prog = xine + button = down + repeat = 1 + config = EventDown +end + +begin + prog = xine + button = ok + repeat = 0 + config = EventSelect +end + +begin + prog = xine + button = guide + repeat = 0 + config = Menu +end + +begin + prog = xine + button = setup + repeat = 0 + config = Menu +end + +begin + prog = xine + button = volup + repeat = 1 + config = Volume+ +end + +begin + prog = xine + button = voldn + repeat = 1 + config = Volume- +end diff --git a/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/preview.jpg b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/preview.jpg Binary files differnew file mode 100644 index 0000000..f3956fa --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/preview.jpg diff --git a/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/remote.run b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/remote.run new file mode 100644 index 0000000..1168696 --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Dvico-Dual-Digital4-rev2/remote.run @@ -0,0 +1,3 @@ +#!/bin/bash + +/usr/sbin/lircd -r -n -d /dev/remotes/dvicoDualDigital4 --driver=devinput --output /var/run/lirc/lircd |
