diff options
Diffstat (limited to 'linhes/linhes-templates/templates/remotes/other/Pinnacle')
| -rw-r--r-- | linhes/linhes-templates/templates/remotes/other/Pinnacle/lircd-pinnacle.conf | 97 | ||||
| -rw-r--r-- | linhes/linhes-templates/templates/remotes/other/Pinnacle/lircrc-pinnacle.txt | 474 | ||||
| -rw-r--r-- | linhes/linhes-templates/templates/remotes/other/Pinnacle/preview.jpg | bin | 0 -> 11124 bytes |
3 files changed, 571 insertions, 0 deletions
diff --git a/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircd-pinnacle.conf b/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircd-pinnacle.conf new file mode 100644 index 0000000..ebc04d9 --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircd-pinnacle.conf @@ -0,0 +1,97 @@ +# +# contributed by Bart Alewijnse <scarfboy@yahoo.com> +# +# brand: Pinnacle Systems +# model: PCTV Remote (Perhaps other ones as well) +# supported devices: there's only one I know of. (serial) +# +# Mail me if your remote is only partly supported, or if it has different +# buttons than listed below. +# + +begin remote + + name PinnacleSysPCTVRemote + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0xFE + gap 180000 + toggle_bit 0 + + begin codes + Mute 0xB53C #Mute 0x000000000000003C + Power 0x2D2F #Power 0x000000000000002F + Chan+Play 0x173F #Chan+Play 0x000000000000003F + Chan-Stop 0xC63E #Chan-Stop 0x000000000000003E + Vol+FF 0xF13B #Vol+FF 0x000000000000003B + Vol-Rew 0x643D #Vol-Rew 0x000000000000003D + 1 0x9F31 #1 0x0000000000000031 + 2 0x3D32 #2 0x0000000000000032 + 3 0xEC33 #3 0x0000000000000033 + 4 0xA834 #4 0x0000000000000034 + 5 0x7935 #5 0x0000000000000035 + 6 0xDB36 #6 0x0000000000000036 + 7 0x0A37 #7 0x0000000000000037 + 8 0x5338 #8 0x0000000000000038 + 9 0x8239 #9 0x0000000000000039 + Fullscreen 0x5E2D #Fullscreen 0x000000000000002D + 0/AV 0x203A #0/AV 0x000000000000003A + Info 0xCB2B #Info 0x000000000000002B + Preview 0xFC2E #Preview 0x000000000000002E + Record 0x3027 #Record 0x0000000000000027 + Chan_Last 0x4325 #Chan_Last 0x0000000000000025 + F_TV 0xE126 #F_TV 0x0000000000000026 + F_TELETEXT 0xB829 #F_TELETEXT 0x0000000000000029 + F_RADIO 0x1A2A #F_RADIO 0x000000000000002A + +# +# here are some extra buttons a new version of the remote seems to have +# +# contributed by Robbert Monna <rjmonna@kabelfoon.nl> +# +# brand: Pinnacle Systems +# model: PCTV Remote (newest version?) +# supported devices: dongle on serial port (from TV-Card) +# + L 0x631F #L 0x000000000000001F + Zoom 0xB21E #Zoom 0x000000000000001E + vol+ 0x851B #vol+ 0x000000000000001B + vol- 0x590F #vol- 0x000000000000000F + channel+ 0x7E17 #channel+ 0x0000000000000017 + channel- 0xC11C #channel- 0x000000000000001C + middle 0x541A #middle 0x000000000000001A + Menu 0x101D #Menu 0x000000000000001D + next 0xF619 #next 0x0000000000000019 + undo 0xAF16 #undo 0x0000000000000016 + pause 0x0D15 #pause 0x0000000000000015 + redo 0x9813 #redo 0x0000000000000013 + Rewind 0x880E #Rewind 0x000000000000000E + Play 0x2A0D #Play 0x000000000000000D + Stop 0xBF0B #Stop 0x000000000000000B + FForward 0x4407 #FForward 0x0000000000000007 + EPG 0x2718 #EPG 0x0000000000000018 + +# here are some more buttons that seem to be mapped differently from +# the ones above + +# contributed by InterCeptor ceptor_7@freemail.hu +# +# brand: Pinnacle Systems PCTV Pro Remote +# model no. of remote control: (I can't find any numbers on it) +# supported devices: serial +# + + 9 0x0000000000000082 + Zoom 0x00000000000000B2 + middle 0x0000000000000014 + + + end codes +end remote + + diff --git a/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircrc-pinnacle.txt b/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircrc-pinnacle.txt new file mode 100644 index 0000000..d3b9261 --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Pinnacle/lircrc-pinnacle.txt @@ -0,0 +1,474 @@ +# Channel Up +begin +prog = mythtv +button = channel+ +config = Up +end + +# Channel Down +begin +prog = mythtv +button = channel- +config = Down +end + +# General Left +begin +prog = mythtv +button = +config = Left +end + +# General Right +begin +prog = mythtv +button = +config = Right +end + + # LiveTV browse up channel +begin +prog = mythtv +button = channel+ +config = Up +end + +# LiveTV browse down channel +begin +prog = mythtv +button = channel- +config = Down +end + +# Volume Up +begin +prog = mythtv +button = vol+ +config = F11 +end + +# Volume Down +begin +prog = mythtv +button = vol- +config = F10 +end + + # OK/Select +begin +prog = mythtv +button = +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = undo +config = Esc +end + +# Power Off/Exit +begin +prog = irexec +button = Power +config = /usr/bin/mythpowerbutton.sh +end + +# Pause +begin +prog = mythtv +button = pause +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +config = | +end + +# Fast forward (10 sec default) +begin +prog = mythtv +button = FForward +config = Right +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Rewind +config = Left +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Vol+FF +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Vol-Rew +config = PgUp +end + +# Record +begin +prog = mythtv +button = Record +config = R +end + +# Delete +begin +prog = mythtv +button = +config = D +end + +# OSD browse +begin +prog = mythtv +button = Menu +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = EPG +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = Info +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = +config = Z +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +# Previous channel +begin +prog = mythtv +button = Chan_Last +config = H +end + +# Closed Captioning +begin +prog = mythtv +button = F_TELETEXT +config = T +end + +# Picture in Picture +begin +prog = mythtv +button = Fullscreen +config = V +end + +# Change channels on both cards +begin +prog = mythtv +button = +config = N +end + +# Clear cutpoints in cutlist +begin +prog = mythtv +button = +config = Q +end + + + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = Menu +config = osd +end + +# Pause playback +begin +prog = mplayer +button = pause +config = pause +end + +# Mute +begin +prog = mplayer +button = Mute +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = Rewind +config = seek -10 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = FForward +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = Stop +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = Vol+FF +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = Vol-Rew +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = Fullscreen +config = vo_fullscreen +end + + + +### Xine lirc setup + +begin +prog = xine +button = Play +config = Play +end + +begin +prog = xine +button = Stop +config = Stop +end + +begin +prog = xine +button = Stop +config = Quit +end + +begin +prog = xine +button = pause +config = Pause +end + +begin +prog = xine +button = channel+ +config = EventUp +end + +begin +prog = xine +button = channel- +config = EventDown +end + +begin +prog = xine +button = +config = EventLeft +end + +begin +prog = xine +button = +config = EventRight +end + +begin +prog = xine +button = +config = EventSelect +end + +begin +prog = xine +button = Menu +config = Menu +end + +begin +prog = xine +button = FForward +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = Rewind +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = vol+ +config = Volume+ +end + +begin +prog = xine +button = vol- +config = Volume- +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = Stop +config = RootMenu +end + +begin +prog = xine +button = next +config = EventNext +end + +begin +prog = xine +button = undo +config = EventPrior +end + +begin +prog = xine +button = Info +config = OSDStreamInfos +end
\ No newline at end of file diff --git a/linhes/linhes-templates/templates/remotes/other/Pinnacle/preview.jpg b/linhes/linhes-templates/templates/remotes/other/Pinnacle/preview.jpg Binary files differnew file mode 100644 index 0000000..bd8e19e --- /dev/null +++ b/linhes/linhes-templates/templates/remotes/other/Pinnacle/preview.jpg |
