From ac3fcc84dfa0692cf2b11a04d7266da47c2ff89c Mon Sep 17 00:00:00 2001 From: Greg Frost Date: Sat, 15 Aug 2009 15:01:58 +0930 Subject: linhes-scripts: repackage so src package contains files --- abs/core-testing/linhes-scripts/770-wrapper.sh | 37 ++++ abs/core-testing/linhes-scripts/PKGBUILD | 25 ++- abs/core-testing/linhes-scripts/idle.sh | 102 ++++++++++ abs/core-testing/linhes-scripts/importfiles.sh | 18 ++ .../linhes-scripts/limit-mythcommflag.sh | 54 +++++ .../linhes-scripts/mplayer-resumer-vdpau.pl | 204 +++++++++++++++++++ abs/core-testing/linhes-scripts/mplayer-resumer.pl | 188 +++++++++++++++++ abs/core-testing/linhes-scripts/myth2mp3 | 82 ++++++++ abs/core-testing/linhes-scripts/myth2x264 | 223 ++++++++++++++++++++ abs/core-testing/linhes-scripts/myth2xvid | 223 ++++++++++++++++++++ .../linhes-scripts/mythwelcome-set-alarm.sh | 23 +++ .../linhes-scripts/mythwelcome-test-wakeup.sh | 16 ++ .../linhes-scripts/pause-mythcommflag.sh | 53 +++++ abs/core-testing/linhes-scripts/pause_mythcommflag | 8 + .../linhes-scripts/run-limit-mythcommflag | 2 + .../linhes-scripts/run-pause-mythcommflag | 2 + abs/core-testing/linhes-scripts/screenshooter.sh | 225 +++++++++++++++++++++ .../linhes-scripts/scripts/770-wrapper.sh | 37 ---- abs/core-testing/linhes-scripts/scripts/idle.sh | 102 ---------- .../linhes-scripts/scripts/importfiles.sh | 18 -- .../linhes-scripts/scripts/limit-mythcommflag.sh | 54 ----- .../scripts/mplayer-resumer-vdpau.pl | 204 ------------------- .../linhes-scripts/scripts/mplayer-resumer.pl | 188 ----------------- abs/core-testing/linhes-scripts/scripts/myth2mp3 | 82 -------- abs/core-testing/linhes-scripts/scripts/myth2x264 | 223 -------------------- abs/core-testing/linhes-scripts/scripts/myth2xvid | 223 -------------------- .../scripts/mythwelcome-set-alarm.sh | 23 --- .../scripts/mythwelcome-test-wakeup.sh | 16 -- .../linhes-scripts/scripts/pause-mythcommflag.sh | 53 ----- .../linhes-scripts/scripts/pause_mythcommflag | 8 - .../linhes-scripts/scripts/run-limit-mythcommflag | 2 - .../linhes-scripts/scripts/run-pause-mythcommflag | 2 - .../linhes-scripts/scripts/screenshooter.sh | 225 --------------------- .../linhes-scripts/scripts/shootscreens-mythtv.sh | 11 - .../linhes-scripts/scripts/shootscreens.sh | 37 ---- .../linhes-scripts/scripts/vdpau-detector | 103 ---------- .../linhes-scripts/shootscreens-mythtv.sh | 11 + abs/core-testing/linhes-scripts/shootscreens.sh | 37 ++++ abs/core-testing/linhes-scripts/vdpau-detector | 103 ++++++++++ 39 files changed, 1634 insertions(+), 1613 deletions(-) create mode 100755 abs/core-testing/linhes-scripts/770-wrapper.sh create mode 100755 abs/core-testing/linhes-scripts/idle.sh create mode 100755 abs/core-testing/linhes-scripts/importfiles.sh create mode 100755 abs/core-testing/linhes-scripts/limit-mythcommflag.sh create mode 100755 abs/core-testing/linhes-scripts/mplayer-resumer-vdpau.pl create mode 100755 abs/core-testing/linhes-scripts/mplayer-resumer.pl create mode 100755 abs/core-testing/linhes-scripts/myth2mp3 create mode 100755 abs/core-testing/linhes-scripts/myth2x264 create mode 100755 abs/core-testing/linhes-scripts/myth2xvid create mode 100755 abs/core-testing/linhes-scripts/mythwelcome-set-alarm.sh create mode 100755 abs/core-testing/linhes-scripts/mythwelcome-test-wakeup.sh create mode 100755 abs/core-testing/linhes-scripts/pause-mythcommflag.sh create mode 100755 abs/core-testing/linhes-scripts/pause_mythcommflag create mode 100755 abs/core-testing/linhes-scripts/run-limit-mythcommflag create mode 100755 abs/core-testing/linhes-scripts/run-pause-mythcommflag create mode 100755 abs/core-testing/linhes-scripts/screenshooter.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/770-wrapper.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/idle.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/importfiles.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/limit-mythcommflag.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/mplayer-resumer-vdpau.pl delete mode 100755 abs/core-testing/linhes-scripts/scripts/mplayer-resumer.pl delete mode 100755 abs/core-testing/linhes-scripts/scripts/myth2mp3 delete mode 100755 abs/core-testing/linhes-scripts/scripts/myth2x264 delete mode 100755 abs/core-testing/linhes-scripts/scripts/myth2xvid delete mode 100755 abs/core-testing/linhes-scripts/scripts/mythwelcome-set-alarm.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/mythwelcome-test-wakeup.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/pause-mythcommflag.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/pause_mythcommflag delete mode 100755 abs/core-testing/linhes-scripts/scripts/run-limit-mythcommflag delete mode 100755 abs/core-testing/linhes-scripts/scripts/run-pause-mythcommflag delete mode 100755 abs/core-testing/linhes-scripts/scripts/screenshooter.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/shootscreens-mythtv.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/shootscreens.sh delete mode 100755 abs/core-testing/linhes-scripts/scripts/vdpau-detector create mode 100755 abs/core-testing/linhes-scripts/shootscreens-mythtv.sh create mode 100755 abs/core-testing/linhes-scripts/shootscreens.sh create mode 100755 abs/core-testing/linhes-scripts/vdpau-detector diff --git a/abs/core-testing/linhes-scripts/770-wrapper.sh b/abs/core-testing/linhes-scripts/770-wrapper.sh new file mode 100755 index 0000000..65573f4 --- /dev/null +++ b/abs/core-testing/linhes-scripts/770-wrapper.sh @@ -0,0 +1,37 @@ +#!/bin/bash +# 770-wrapper.sh by Cecil Watsona +# Modifed from +# pdatranscode +# +# created by Jeff Volckaert (inspired by Zach White) +# modified 01/16/06 +VIDEODIR=$1 +FILENAME=$2 +TITLE=$3 +# Remove non-alpha characters from TITLE +TITLE=${TITLE//[^a-zA-Z0-9]/} +STARTTIME=$4 +DIROUT=/myth/n770 + +# Sanity checking, to make sure everything is in order. +if [ -z "$VIDEODIR" -o -z "$FILENAME" ]; then + echo "Usage: $0 "" <Starttime>" + exit 5 +fi +if [ ! -f $VIDEODIR/$FILENAME ]; then + echo "File does not exist: $VIDEODIR/$FILENAME" + exit 6 +fi + +# Transcode the file + + +perl /usr/local/bin/770-encode.pl -q -p mplayer $VIDEODIR/$FILENAME $DIROUT/$TITLE-$STARTTIME.avi + +chmod 664 $DIROUT/$TITLE-$STARTTIME.avi + +ERROR=$? +if [ $ERROR -ne 0 ]; then + echo "Transcoding failed for ${FILENAME} with error $ERROR" + exit 3 +fi diff --git a/abs/core-testing/linhes-scripts/PKGBUILD b/abs/core-testing/linhes-scripts/PKGBUILD index 365f177..fb66bff 100644 --- a/abs/core-testing/linhes-scripts/PKGBUILD +++ b/abs/core-testing/linhes-scripts/PKGBUILD @@ -3,15 +3,36 @@ pkgname=linhes-scripts pkgver=1 -pkgrel=21 +pkgrel=23 pkgdesc="Various scripts that help to make LinHES, LinHES." arch=('i686' 'x86_64') license=('GPL2') depends=('xosd' 'cpulimit') url="http://linhes.org/" +source=( +myth2xvid +shootscreens.sh +mplayer-resumer-vdpau.pl +run-pause-mythcommflag +shootscreens-mythtv.sh +importfiles.sh +myth2mp3 +mplayer-resumer.pl +mythwelcome-test-wakeup.sh +pause-mythcommflag.sh +myth2x264 +770-wrapper.sh +mythwelcome-set-alarm.sh +pause_mythcommflag +limit-mythcommflag.sh +vdpau-detector +idle.sh +screenshooter.sh +run-limit-mythcommflag +) build() { - cd $startdir/scripts + cd $startdir/src mkdir -p $startdir/pkg/usr/LH/bin install -D -m755 myt* 770* idle.sh imp* shoo* *commflag*sh mplayer* vdpau* screen* $startdir/pkg/usr/LH/bin mkdir -p $startdir/pkg/etc/sv/pause-mythcommflag/supervise diff --git a/abs/core-testing/linhes-scripts/idle.sh b/abs/core-testing/linhes-scripts/idle.sh new file mode 100755 index 0000000..f95b9fa --- /dev/null +++ b/abs/core-testing/linhes-scripts/idle.sh @@ -0,0 +1,102 @@ +#!/bin/bash + +usage () { + echo "Usage: $0 [-h] [-s] [-t <minutes_needed>]" + echo + echo "-h - Print this help/usage message and quit" + echo "-s - Run silently (default is verbose)" + echo "-t - Minutes of idle time needed (default is 20)" + echo "-v - Be more verbose for debugging" + echo + echo "Silent mode is recommended for use in cron jobs or scripts." + exit $1 +} + +msg () { # A status reporting function + [ "$VERBOSE" -ne 0 ] && echo "$*" +} + +mysql_cmd () { + /usr/bin/mysql -u root mythconverg -sBe "$*" +} + +# Command line argument handling +VERBOSE=1 +TIME_BEFORE=20 +TIME_AFTER=5 # Only adjustable by editing here + +while getopts "hst:v" OPT ; do + case $OPT in + h) usage 0 ;; + s) VERBOSE=0 ;; + t) TIME_BEFORE=$OPTARG ;; + v) VERBOSE=2 ;; + *) usage 1 ;; + esac +done +# Check for extra cruft on the command line... +shift $(($OPTIND - 1)) +[ -n "$*" ] && usage 1 + +msg "Checking what MythTV is doing now or plans within $TIME_BEFORE minutes..." +msg + +/usr/bin/mythshutdown -s 1 +BUSY="$?" +msg "mythshutdown returned $BUSY" +# Ignore certain non-zero flag values +BUSY=$(($BUSY & 0x2F)) + +SCHEMALOCK=$(mysql_cmd "select count(*) from schemalock") +msg "schemalock $SCHEMALOCK" + +JOBS=$(mysql_cmd "select count(*) from jobqueue where status = 4") +msg "running jobs $JOBS" + +INUSE=$(mysql_cmd "select count(*) from inuseprograms") +msg "inuse programs $INUSE" + +POTENTIAL=$(mysql_cmd "select count(*) from recordmatch as rm, program as p + where rm.chanid = p.chanid and rm.starttime = p.starttime + and rm.starttime < now() + interval $TIME_BEFORE minute + and now() < p.endtime + interval $TIME_AFTER minute") +msg "potential recordings $POTENTIAL" +# See if any of the potential upcoming recordings are real. +# This is ugly, but only the backend knows what programs it really +# plans to record or ignore, so we can't just check the DB. :-( +if [ "$VERBOSE" -ge 2 ] ; then + mysql_cmd "select p.starttime, p.endtime, p.title, subtitle + from recordmatch as rm, program as p + where rm.chanid = p.chanid and rm.starttime = p.starttime + and rm.starttime < now() + interval $TIME_BEFORE minute + and now() < p.endtime + interval $TIME_AFTER minute + order by p.starttime, p.endtime" +fi +UPCOMING=$(/usr/bin/mythbackend --printsched 2>&1 | + /bin/awk -v potential=$POTENTIAL ' + BEGIN {item=-1;real=0} + /--- print list start ---/,/--- print list end ---/ { + if (item>0 && item<=potential && substr($0,70,1) ~ "[0-9]") real+=1; + item += 1; + } + END {print real} +') +msg "planned recordings $UPCOMING" +if [ "$VERBOSE" -ge 2 ] ; then + /usr/bin/mythbackend --printsched 2>&1 | + /bin/awk -v potential=$POTENTIAL ' + BEGIN {item=-1} + /--- print list start ---/,/--- print list end ---/ { + if (item>0 && item<=potential) print $0; + item += 1; + }' +fi +activities=$(($BUSY + $SCHEMALOCK + $JOBS + $INUSE + $UPCOMING)) +msg +if [ "$activities" -eq 0 ] ; then + msg "System is idle" + exit 0 +else + msg "System is busy" + exit 1 +fi diff --git a/abs/core-testing/linhes-scripts/importfiles.sh b/abs/core-testing/linhes-scripts/importfiles.sh new file mode 100755 index 0000000..84f1ab5 --- /dev/null +++ b/abs/core-testing/linhes-scripts/importfiles.sh @@ -0,0 +1,18 @@ +#!/bin/bash +export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" + +DVD_or_CD=`cat /proc/mounts |grep iso9660|awk '{print $2}'|tail -1` +if [ "$DVD_or_CD" != "" ]; then + echo "Copying files from $DVD_or_CD to /myth/video." > /tmp/screens + echo "This could take several minutes, depending on the" >> /tmp/screens + echo "speed and size of your optical media." >> /tmp/screens + cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=0 & + /bin/cp -R $DVD_or_CD/* /myth/video/ + killall osd_cat + echo "Copied videos from $DVD_or_CD to /myth/video" > /tmp/screens + cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=2 & +else + echo "No optical media found. If you just inserted" > /tmp/screens + echo "your media, please wait a moment and try again." >> /tmp/screens + cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=5 & +fi diff --git a/abs/core-testing/linhes-scripts/limit-mythcommflag.sh b/abs/core-testing/linhes-scripts/limit-mythcommflag.sh new file mode 100755 index 0000000..8ca61c7 --- /dev/null +++ b/abs/core-testing/linhes-scripts/limit-mythcommflag.sh @@ -0,0 +1,54 @@ +#!/bin/bash +# limit-mythcommflag.sh v0.1 05/17/09 +# Utility to automatically limit mythcommflag if CPU usage is above a certain level. +# Uses cpulimit from http://cpulimit.sourceforge.net/ +# Free for any use. +# Installation: +# cp limit-mythcommflag.sh /usr/LH/bin +# chmod +x /usr/LH/bin/limit-mythcommflag.sh +# Usage: Executed from runit limit-mythcommflag at boot + +# Threshold for when mythcommflag will be paused +CPUTHRESHOLD=43 + +# Limit mythcommflag to percentage +LIMITCPU=20 + +# Log file to write (use /dev/null for no log) +#LOG=/var/log/mythtv/limit-mythcommflag.log +LOG=/dev/null + +# Number of seconds to wait between checking for mythcommflag process +SLEEP=5 + +#sleep $SLEEP + +touch $LOG + +ALREADYLIMITED=0 + +while true; do + PROCCOMMFLAG=`pidof mythcommflag` + if [ -n "${PROCCOMMFLAG}" ] + then + FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'` + if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD" ] + then + echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD%, LIMIT Commflagging" # >> $LOG + if [ $ALREADYLIMITED -eq 0 ]; then + cpulimit -e mythcommflag -l $LIMITCPU & + cpulimit_pid=$! + ALREADYLIMITED=1 + fi + else + echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD%, UNLIMIT Commflagging" #>> $LOG + if [ $ALREADYLIMITED -eq 1 ]; then + kill $cpulimit_pid + ALREADYLIMITED=0 + fi + fi +# else +# echo "No COMMFLAG Process Active" >> $LOG + fi + sleep $SLEEP +done diff --git a/abs/core-testing/linhes-scripts/mplayer-resumer-vdpau.pl b/abs/core-testing/linhes-scripts/mplayer-resumer-vdpau.pl new file mode 100755 index 0000000..9c82158 --- /dev/null +++ b/abs/core-testing/linhes-scripts/mplayer-resumer-vdpau.pl @@ -0,0 +1,204 @@ +#!/usr/bin/perl + +use Shell; +use strict; +use POSIX qw(floor); + +# Written by Bob Igo from the MythTV Store at http://MythiC.TV +# Email: bob@stormlogic.com +# +# If you run into problems with this script, please send me email + +# CHANGE LOG: +# 3/9/2009 +# Modded Bob's wonderful resumer script to work with the vdpau +# options detector script someone anonymously posted to the wiki +# +# http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo +# +# You need to have both this and the vdpau-detector script in the same +# dir for this to work properly. Also, change your default mplayer +# options in mythfrontend to read simply: # mplayer-resumer-vdpau.pl %s +# +# To tweak the shell commands for mplayer, edit the vdpau-detector script. +# It has a small README inside it as comments +# ENJOY! + +# 5/3/2006 +# Added last time started checking. +# If this script is restarted within $tdiff (default 5 seconds) +# then it will delete the file used to keep track of the videos +# resume position. + +# PURPOSE: +# -------------------------- +# This is a wrapper script to prove the concept of having MythTV +# resume playback of previously-stopped video where you left off. +# It's likely that a good solution will look different than this +# initial code. + +# RATIONALE: +# -------------------------- +# Watching 90% of a video and stopping causes you to return to the +# beginning again the next time you watch it. Remembering where +# you were in the video and resuming at that position is a much nicer +# behavior for the user. +# +# By default, mplayer spits out timecode information that tells you +# where you are in the video, to the tenth of a second. Mplayer also +# supports a seek feature on the command-line. We can make use of these +# features to write an mplayer wrapper that will remember the last +# position in a video file and resume to it on playback. + +# PARAMETERS: +# -------------------------- +# see print_usage() below + +# FILES: +# -------------------------- +# $infile, the video to play +# $resumefile, the video's resume file (see get_resume_filename() below) + +# KNOWN ISSUES: +# -------------------------- +# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything +# captured via an HDTV tuner card and put into your /myth/video directory +# will fail with this resumer. +# +# Current theories include the timecode having to do with the show's broadcast +# time, recording time, or perhaps its upload time to the station that +# broadcast it. + +# DESIGN LIMITATION: +# ------------------------- +# If the video file to be played is on a read-only filesystem, or otherwise +# lives in a location that cannot be written to, resume will fail. This is +# because the current implementation uses a file parallel to the video file +# to store the timecode. +# + +my $infile; +my $resumefile; +my $mplayer_parameters; +my $fudge_factor=2; # number of additional seconds to skip back before playback +my $tnow; # Time now. +my $tprev; # Time the prog was last started. + # Returned from the modification time of the xx.resume file. +my $tdiff=5; # How many seconds before we should start from + # the beginning of the movie +#DEBUG +#open(DEBUG,">/tmp/debug") || die "unable to open debug file"; + +sub init () { + $tnow = time(); + $infile = @ARGV[$#ARGV]; + + $resumefile = &get_resume_filename($infile); + # This returns the 9th element of the 13 element array + # created by the stat function. + $tprev = (stat ($resumefile))[9]; + # if this file is restarted in less than 5 seconds then + # remove the .resume file + if ( ($tnow - $tprev) < $tdiff ) { + unlink($resumefile); + } + + $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]); +} + +&init(); +&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile); + +#close(DEBUG); + +# For $pathname, return $path.$filename.resume +sub get_resume_filename () { + my($pathname)=@_; + + my $idx = rindex($pathname,"/"); + + if ($idx == -1) { # There was no "/" in $pathname + return ".".$pathname.".resume"; + } else { + # Now we need to split out the path from the filename. + my $path = substr($pathname,0,$idx+1); + my $filename = substr($pathname,$idx+1); + return "$path.$filename.resume"; + } +} + +# Calls mplayer and returns the last known video position +sub mplayer () { + my($parameters,$infile)=@_; + my $seconds=0; + my $timecode=&get_time_offset($infile); + my $mplayeropts=`./vdpau-detector $infile`; chomp $mplayeropts; + my @lines = split "\n", $mplayeropts; + my $last_line = pop(@lines); + my $command = "mplayer $last_line $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |"; + + open(SHELL, $command); + # The kind of line we care about looks like this example: + # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68% + # But all we care to look at is the first number. + + while (<SHELL>) { + #print DEBUG $_; + if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it + my $last_timecode_line = &extract_last_timecode_line($_); + if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) { + $seconds=$1; + } + } + } + close(SHELL); + + return $seconds; + + sub extract_last_timecode_line () { + my ($line)=@_; + my @lines=split('A:',$line); + return @lines[$#lines-1]; + } +} + +# Save the last known video position +sub save_time_offset () { + my($seconds, $resumefile)=@_; + + open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing"; + print RESUMEFILE "$seconds"; + close(RESUMEFILE); +} + +# returns the number of seconds corresponding to the last known video position, +# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer +sub get_time_offset () { + my($videofile)=@_; + my($resumefile) = &get_resume_filename($videofile); + my $seconds=0; + my $timecode; + + open(RESUMEFILE, "<$resumefile") || return "00:00:00"; + while(<RESUMEFILE>) { + $seconds=$_; + } + close(RESUMEFILE); + + my $hours = floor($seconds/3600); + $seconds = $seconds - $hours*3600; + + my $minutes = floor($seconds/60); + $seconds = int($seconds - $minutes*60) - $fudge_factor; + + $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds; +# print "TIMECODE: $timecode\n"; + return $timecode; +} + +sub print_usage () { + print "USAGE:\n"; + print "\t",$ARGV[0], "[mplayer parameters] video_file\n"; + print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n"; + print "\t","Version 3/9/2009\n"; +} diff --git a/abs/core-testing/linhes-scripts/mplayer-resumer.pl b/abs/core-testing/linhes-scripts/mplayer-resumer.pl new file mode 100755 index 0000000..c785a25 --- /dev/null +++ b/abs/core-testing/linhes-scripts/mplayer-resumer.pl @@ -0,0 +1,188 @@ +#!/usr/bin/perl + +use Shell; +use strict; +use POSIX qw(floor); + +# Written by Bob Igo from the MythTV Store at http://MythiC.TV +# Email: bob@stormlogic.com +# +# If you run into problems with this script, please send me email + +# PURPOSE: +# -------------------------- +# This is a wrapper script to prove the concept of having MythTV +# resume playback of previously-stopped video where you left off. +# It's likely that a good solution will look different than this +# initial code. + +# RATIONALE: +# -------------------------- +# Watching 90% of a video and stopping causes you to return to the +# beginning again the next time you watch it. Remembering where +# you were in the video and resuming at that position is a much nicer +# behavior for the user. +# +# By default, mplayer spits out timecode information that tells you +# where you are in the video, to the tenth of a second. Mplayer also +# supports a seek feature on the command-line. We can make use of these +# features to write an mplayer wrapper that will remember the last +# position in a video file and resume to it on playback. + +# PARAMETERS: +# -------------------------- +# see print_usage() below + +# FILES: +# -------------------------- +# $infile, the video to play +# $resumefile, the video's resume file (see get_resume_filename() below) + +# KNOWN ISSUES: +# -------------------------- +# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything +# captured via an HDTV tuner card and put into your /myth/video directory +# will fail with this resumer. +# +# Current theories include the timecode having to do with the show's broadcast +# time, recording time, or perhaps its upload time to the station that +# broadcast it. + +# DESIGN LIMITATION: +# ------------------------- +# If the video file to be played is on a read-only filesystem, or otherwise +# lives in a location that cannot be written to, resume will fail. This is +# because the current implementation uses a file parallel to the video file +# to store the timecode. +# + +# CHANGE LOG: +# 5/3/2006 +# Added last time started checking. +# If this script is restarted within $tdiff (default 5 seconds) +# then it will delete the file used to keep track of the videos +# resume position. + + +my $infile; +my $resumefile; +my $mplayer_parameters; +my $fudge_factor=2; # number of additional seconds to skip back before playback +my $tnow; # Time now. +my $tprev; # Time the prog was last started. + # Returned from the modification time of the xx.resume file. +my $tdiff=5; # How many seconds before we should start from + # the beginning of the movie +#DEBUG +#open(DEBUG,">/tmp/debug") || die "unable to open debug file"; + +sub init () { + $tnow = time(); + $infile = @ARGV[$#ARGV]; + + $resumefile = &get_resume_filename($infile); + # This returns the 9th element of the 13 element array + # created by the stat function. + $tprev = (stat ($resumefile))[9]; + # if this file is restarted in less than 5 seconds then + # remove the .resume file + if ( ($tnow - $tprev) < $tdiff ) { + unlink($resumefile); + } + + $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]); +} + +&init(); +&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile); + +#close(DEBUG); + +# For $pathname, return $path.$filename.resume +sub get_resume_filename () { + my($pathname)=@_; + + my $idx = rindex($pathname,"/"); + + if ($idx == -1) { # There was no "/" in $pathname + return ".".$pathname.".resume"; + } else { + # Now we need to split out the path from the filename. + my $path = substr($pathname,0,$idx+1); + my $filename = substr($pathname,$idx+1); + return "$path.$filename.resume"; + } +} + +# Calls mplayer and returns the last known video position +sub mplayer () { + my($parameters,$infile)=@_; + my $seconds=0; + my $timecode=&get_time_offset($infile); + my $command = "mplayer $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |"; + + open(SHELL, $command); + # The kind of line we care about looks like this example: + # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68% + # But all we care to look at is the first number. + + while (<SHELL>) { + #print DEBUG $_; + if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it + my $last_timecode_line = &extract_last_timecode_line($_); + if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) { + $seconds=$1; + } + } + } + close(SHELL); + + return $seconds; + + sub extract_last_timecode_line () { + my ($line)=@_; + my @lines=split('A:',$line); + return @lines[$#lines-1]; + } +} + +# Save the last known video position +sub save_time_offset () { + my($seconds, $resumefile)=@_; + + open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing"; + print RESUMEFILE "$seconds"; + close(RESUMEFILE); +} + +# returns the number of seconds corresponding to the last known video position, +# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer +sub get_time_offset () { + my($videofile)=@_; + my($resumefile) = &get_resume_filename($videofile); + my $seconds=0; + my $timecode; + + open(RESUMEFILE, "<$resumefile") || return "00:00:00"; + while(<RESUMEFILE>) { + $seconds=$_; + } + close(RESUMEFILE); + + my $hours = floor($seconds/3600); + $seconds = $seconds - $hours*3600; + + my $minutes = floor($seconds/60); + $seconds = int($seconds - $minutes*60) - $fudge_factor; + + $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds; +# print "TIMECODE: $timecode\n"; + return $timecode; +} + +sub print_usage () { + print "USAGE:\n"; + print "\t",$ARGV[0], "[mplayer parameters] video_file\n"; + print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n"; + print "\t","Version 5/3/2006\n"; +} diff --git a/abs/core-testing/linhes-scripts/myth2mp3 b/abs/core-testing/linhes-scripts/myth2mp3 new file mode 100755 index 0000000..89181c1 --- /dev/null +++ b/abs/core-testing/linhes-scripts/myth2mp3 @@ -0,0 +1,82 @@ +#!/bin/sh +# convert recordings to as mp3 audio only +# version 0.9 + +# usage: +# first parameter must be %DIR%/%FILE% of the recording +# second parameter must be the desired base name of the output +# third parameter must be %CHANID% if you set USECUTLIST=Y +# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y +# In the mythtv setup screen invoke this script like this: +# MYTHTV User Job Command: +# /usr/LH/bin/myth2mp3 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" + +# options: +BITRATE=256k #ie. 128k, 160k, 192k, 224k, 256k +USECUTLIST=Y #Y or N + +# where the converted audio is stored +OUT_DIR=/myth/music + +# create temp filename so multiple instances won't conflict +TMPNAME=toMP3-$$ +TMPFILE=/myth/tmp/$TMPNAME.mp3 +TMPCUTFILE=/myth/tmp/$TMPNAME.mpg +FFINPUTFILE=$1 + +# log file location +LOGFILE=/var/log/mythtv/myth2mp3.log +CDate="`date`" +echo "" >> $LOGFILE +echo $CDate >> $LOGFILE +echo "File to encode: $1 Name: $2" >> $LOGFILE + +# start timer +beforetime="$(date +%s)" + +# check if using cutlist +if [ $USECUTLIST = Y ];then + MYTHCOMMFRAMES=`mythcommflag --getcutlist -f "$FFINPUTFILE" | grep 'Cutlist:' | cut -d \ -f 2` + if [ -n "$MYTHCOMMFRAMES" ]; then + echo "Extracting Cutlist..." >> $LOGFILE + /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist + FFINPUTFILE=$TMPCUTFILE + fi +fi + +# run ffmpeg to do conversion +echo "Encoding..." >> $LOGFILE +/usr/bin/nice -n19 /usr/bin/ffmpeg -i "$FFINPUTFILE" -vn -acodec libmp3lame -ab $BITRATE -ar 44100 -ac 2 "$TMPFILE" +ERROR=$? + +# make output filename unique +OUTPUTFILE=$OUT_DIR/$2.mp3 +i=1 +while [ -e "$OUTPUTFILE" ] +do + OUTPUTFILE=$OUT_DIR/$2-$i.mp3 + i=`expr $i + 1` +done + +# move temp file to output location +chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" + +# stop timer +aftertime="$(date +%s)" +seconds="$(expr $aftertime - $beforetime)" + +if [ $ERROR -eq 0 ]; then + echo "File Encoded Sucessfully: $OUTPUTFILE" >> $LOGFILE + hours=$((seconds / 3600)) + seconds=$((seconds % 3600)) + minutes=$((seconds / 60)) + seconds=$((seconds % 60)) + echo "Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" >> $LOGFILE +else + echo "ERROR: $ERROR" >> $LOGFILE +fi + +# clean up left over files +unlink $TMPFILE 2> /dev/null +unlink $TMPCUTFILE 2> /dev/null +unlink $TMPCUTFILE.map 2> /dev/null diff --git a/abs/core-testing/linhes-scripts/myth2x264 b/abs/core-testing/linhes-scripts/myth2x264 new file mode 100755 index 0000000..014fcbe --- /dev/null +++ b/abs/core-testing/linhes-scripts/myth2x264 @@ -0,0 +1,223 @@ +#!/bin/sh +# convert recording to x264 encoded avi +# version 0.6 + +# usage: +# first parameter must be %DIR%/%FILE% of the recording +# second parameter must be the desired base name of the output +# third parameter must be %CHANID% if you set USECUTLIST=Y +# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y +# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV +# in the mythtv setup screen invoke this script like this: +# MYTHTV User Job Command: +# /usr/LH/bin/myth2x264 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%" + +# options: +RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544) +BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000) +USECUTLIST=Y # Y or N + +# where the converted video is stored +OUT_DIR=/myth/video + +# database settings +BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} +DBUSERNAME=${DBUSERNAME:-"mythtv"} +DBPASSWORD=${DBPASSWORD:-"mythtv"} +SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e" + +#------FUNCTIONS--------------- +update_comment() +# Arg_1 = COMMENT +{ +if [ $NO_JOBID = 0 ]; then + `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"` +fi +} + +update_status() +# Arg_1 = status code +{ +if [ $NO_JOBID = 0 ]; then + `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"` +fi +} + +check_background_progress() +# check mencoder progress in background +# Arg_1 = PROGRESS CALCULATION +{ +while [ `tail -1 $STATUSFILE | grep -c "^x264 \[info\]: kb/s:"` = 0 ] +do + sleep 10 + check_myth_jobcmds + current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"` + prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'` + current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'` + if [ -n "$prog_percent" ]; then + prog_percent=`expr $prog_percent / $1` + echo "$prog_percent% Completed @ $current_FPS fps" + update_comment "$prog_percent% Completed @ $current_FPS fps" + fi + sleep 10 +done +} + +check_myth_jobcmds() +# check the myth database for stop pause or resume commands +{ +if [ $NO_JOBID = 0 ]; then + CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'` + case "$CURRENT_CMD" in + # JOB_RUN + 0) ;; + # JOB_PAUSE + 1) update_status 6 + kill -s STOP $mencoder_pid ;; + # JOB_RESUME + 2) update_status 4 + `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` + kill -s CONT $mencoder_pid ;; + # JOB_STOP + 4) update_status 5 + `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` + kill -9 $mencoder_pid $command_pid + clean_up_files + echo "Encode Cancelled" >> $LOGFILE + update_status 320 + exit ;; + esac +fi +} + +get_mencoder_pid() +{ +process_name="" +i1=1 +while [ "$process_name" != "found" ]; do + if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then + process_name="found" + else + mencoder_pid=`expr $mencoder_pid + 1` + fi + i1=`expr $i1 + 1` + if [ $i1 -gt 20 ]; then + break + fi +done +} + +clean_up_files() +# clean up left over files +{ +unlink $TMPFILE 2> /dev/null +unlink $TMPCUTFILE 2> /dev/null +unlink $TMPCUTFILE.map 2> /dev/null +unlink $TWOPASSFILE 2> /dev/null +unlink $TWOPASSFILE.tmp 2> /dev/null +unlink $STATUSFILE 2> /dev/null +unlink $MENCODER_RETURN_CODE 2> /dev/null +unlink $MENCODER_RETURN_CODE_2 2> /dev/null +} + +#-------MAIN SCRIPT------------ + +# check if %JOBID% is passed from command line +JOBID=$5 +if [ -z "$JOBID" ]; then + NO_JOBID=1 +else + NO_JOBID=0 +fi + +# create temp filename so multiple instances won't conflict +TMPNAME=toX264-$$ +TMPFILE=/myth/tmp/$TMPNAME.avi +TMPCUTFILE=/myth/tmp/$TMPNAME.mpg +MENINPUTFILE=$1 +TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log +STATUSFILE=/myth/tmp/$TMPNAME-status.log +MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code +MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2 + +# log file location +LOGFILE=/var/log/mythtv/myth2x264.log +CDate="`date`" +echo "" >> $LOGFILE +echo $CDate >> $LOGFILE +echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE + +# start timer +beforetime="$(date +%s)" + +check_myth_jobcmds + +# check if using cutlist +if [ $USECUTLIST = Y ]; then + MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2` + if [ -n "$MYTHCOMMFRAMES" ]; then + echo "Extracting Cutlist..." >> $LOGFILE + update_comment "Extracting Cutlist" + /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist + MENINPUTFILE=$TMPCUTFILE + fi +fi + +# run mencoder in background to do 1st pass conversion +echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE +( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ +-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \ +-x264encopts threads=auto:pass=1:turbo=1:subq=1:frameref=1:bframes=3:bitrate=$BITRATE \ +-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) & +mencoder_pid=$! +command_pid=$mencoder_pid +get_mencoder_pid + +check_background_progress "2" + +# run mencoder in background to do 2nd pass conversion +echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE +( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ +-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \ +-x264encopts threads=auto:pass=2:subq=5:8x8dct:frameref=3:bframes=3:b_pyramid:weight_b:bitrate=$BITRATE \ +-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) & +mencoder_pid=$! +command_pid=$mencoder_pid +get_mencoder_pid + +check_background_progress "2 + 50" + +ERROR=$? + +# make output filename unique +OUTPUTFILE=$OUT_DIR/$2.avi +i=1 +while [ -e "$OUTPUTFILE" ] +do + OUTPUTFILE=$OUT_DIR/$2-$i.avi + i=`expr $i + 1` +done + +# move temp file to output location +chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" + +# stop timer +aftertime="$(date +%s)" +seconds="$(expr $aftertime - $beforetime)" + +if [ $ERROR -eq 0 ]; then + echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE + hours=$((seconds / 3600)) + seconds=$((seconds % 3600)) + minutes=$((seconds / 60)) + seconds=$((seconds % 60)) + echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE + update_status 272 + update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" +else + update_status 304 + update_comment "Encode Failed. Exit status: $ERROR" + echo "ERROR: $ERROR" >> $LOGFILE +fi + +clean_up_files diff --git a/abs/core-testing/linhes-scripts/myth2xvid b/abs/core-testing/linhes-scripts/myth2xvid new file mode 100755 index 0000000..d0fcb42 --- /dev/null +++ b/abs/core-testing/linhes-scripts/myth2xvid @@ -0,0 +1,223 @@ +#!/bin/sh +# convert recording to xvid encoded avi +# version 1.3 + +# usage: +# first parameter must be %DIR%/%FILE% of the recording +# second parameter must be the desired base name of the output +# third parameter must be %CHANID% if you set USECUTLIST=Y +# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y +# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV +# in the mythtv setup screen invoke this script like this: +# MYTHTV User Job Command: +# /usr/LH/bin/myth2xvid "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%" + +# options: +RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544) +BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000) +USECUTLIST=Y # Y or N + +# where the converted video is stored +OUT_DIR=/myth/video + +# database settings +BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} +DBUSERNAME=${DBUSERNAME:-"mythtv"} +DBPASSWORD=${DBPASSWORD:-"mythtv"} +SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e" + +#------FUNCTIONS--------------- +update_comment() +# Arg_1 = COMMENT +{ +if [ $NO_JOBID = 0 ]; then + `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"` +fi +} + +update_status() +# Arg_1 = status code +{ +if [ $NO_JOBID = 0 ]; then + `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"` +fi +} + +check_background_progress() +# check mencoder progress in background +# Arg_1 = PROGRESS CALCULATION +{ +while [ `tail -1 $STATUSFILE | grep -c "^Audio stream:"` = 0 ] +do + sleep 10 + check_myth_jobcmds + current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"` + prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'` + current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'` + if [ -n "$prog_percent" ]; then + prog_percent=`expr $prog_percent / $1` + echo "$prog_percent% Completed @ $current_FPS fps" + update_comment "$prog_percent% Completed @ $current_FPS fps" + fi + sleep 10 +done +} + +check_myth_jobcmds() +# check the myth database for stop pause or resume commands +{ +if [ $NO_JOBID = 0 ]; then + CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'` + case "$CURRENT_CMD" in + # JOB_RUN + 0) ;; + # JOB_PAUSE + 1) update_status 6 + kill -s STOP $mencoder_pid ;; + # JOB_RESUME + 2) update_status 4 + `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` + kill -s CONT $mencoder_pid ;; + # JOB_STOP + 4) update_status 5 + `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` + kill -9 $mencoder_pid $command_pid + clean_up_files + echo "Encode Cancelled" >> $LOGFILE + update_status 320 + exit ;; + esac +fi +} + +get_mencoder_pid() +{ +process_name="" +i1=1 +while [ "$process_name" != "found" ]; do + if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then + process_name="found" + else + mencoder_pid=`expr $mencoder_pid + 1` + fi + i1=`expr $i1 + 1` + if [ $i1 -gt 20 ]; then + break + fi +done +} + +clean_up_files() +# clean up left over files +{ +unlink $TMPFILE 2> /dev/null +unlink $TMPCUTFILE 2> /dev/null +unlink $TMPCUTFILE.map 2> /dev/null +unlink $TWOPASSFILE 2> /dev/null +unlink $TWOPASSFILE.tmp 2> /dev/null +unlink $STATUSFILE 2> /dev/null +unlink $MENCODER_RETURN_CODE 2> /dev/null +unlink $MENCODER_RETURN_CODE_2 2> /dev/null +} + +#-------MAIN SCRIPT------------ + +# check if %JOBID% is passed from command line +JOBID=$5 +if [ -z "$JOBID" ]; then + NO_JOBID=1 +else + NO_JOBID=0 +fi + +# create temp filename so multiple instances won't conflict +TMPNAME=toXVID-$$ +TMPFILE=/myth/tmp/$TMPNAME.avi +TMPCUTFILE=/myth/tmp/$TMPNAME.mpg +MENINPUTFILE=$1 +TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log +STATUSFILE=/myth/tmp/$TMPNAME-status.log +MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code +MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2 + +# log file location +LOGFILE=/var/log/mythtv/myth2xvid.log +CDate="`date`" +echo "" >> $LOGFILE +echo $CDate >> $LOGFILE +echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE + +# start timer +beforetime="$(date +%s)" + +check_myth_jobcmds + +# check if using cutlist +if [ $USECUTLIST = Y ]; then + MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2` + if [ -n "$MYTHCOMMFRAMES" ]; then + echo "Extracting Cutlist..." >> $LOGFILE + update_comment "Extracting Cutlist" + /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist + MENINPUTFILE=$TMPCUTFILE + fi +fi + +# run mencoder in background to do 1st pass conversion +echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE +( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ +-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \ +-xvidencopts pass=1:vhq=0:turbo:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \ +-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) & +mencoder_pid=$! +command_pid=$mencoder_pid +get_mencoder_pid + +check_background_progress "2" + +# run mencoder in background to do 2nd pass conversion +echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE +( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ +-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \ +-xvidencopts pass=2:vhq=0:bvhq=1:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \ +-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) & +mencoder_pid=$! +command_pid=$mencoder_pid +get_mencoder_pid + +check_background_progress "2 + 50" + +ERROR=$? + +# make output filename unique +OUTPUTFILE=$OUT_DIR/$2.avi +i=1 +while [ -e "$OUTPUTFILE" ] +do + OUTPUTFILE=$OUT_DIR/$2-$i.avi + i=`expr $i + 1` +done + +# move temp file to output location +chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" + +# stop timer +aftertime="$(date +%s)" +seconds="$(expr $aftertime - $beforetime)" + +if [ $ERROR -eq 0 ]; then + echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE + hours=$((seconds / 3600)) + seconds=$((seconds % 3600)) + minutes=$((seconds / 60)) + seconds=$((seconds % 60)) + echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE + update_status 272 + update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" +else + update_status 304 + update_comment "Encode Failed. Exit status: $ERROR" + echo "ERROR: $ERROR" >> $LOGFILE +fi + +clean_up_files \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/mythwelcome-set-alarm.sh b/abs/core-testing/linhes-scripts/mythwelcome-set-alarm.sh new file mode 100755 index 0000000..6dbd39e --- /dev/null +++ b/abs/core-testing/linhes-scripts/mythwelcome-set-alarm.sh @@ -0,0 +1,23 @@ +#!/bin/sh +#$1 is the first argument to the script. It is the time in seconds since 1970 +#This is defined in mythwelcome with the time_t argument + +# Configure mythwelcome --setup page: +# Command to Set Wakeup Time: sudo sh -c "/usr/LH/bin/mythwelcome-set-alarm.sh $time" +# Wakeup Time Format: time_t +# nvram-wakeup Restart Command: Leave this blank +# Command to reboot: sudo /sbin/reboot +# Command to shutdown: sudo /sbin/poweroff +# Command to run Xterm: xterm +# Command to start the Frontend: /usr/bin/mythfrontend -l /var/log/mythtv/mythfrontend.log + +# Configure mythtv-setup Shutdown/Wakeup Options page: +# Idletimeout (secs): any value greater that 0 +# Wakeup time format: yyyy-MM-dd:hh:mm +# Set wakeup time command: /usr/bin/mythshutdown --setwakeup $time +# Server Halt command: /usr/bin/mythshutdown --shutdown +# Pre shutdown check command: /usr/bin/mythshutdown --check + +echo 0 > /sys/class/rtc/rtc0/wakealarm #this clears your alarm +echo $1 > /sys/class/rtc/rtc0/wakealarm #this writes your alarm +cat /proc/driver/rtc > /var/log/wake_alarm diff --git a/abs/core-testing/linhes-scripts/mythwelcome-test-wakeup.sh b/abs/core-testing/linhes-scripts/mythwelcome-test-wakeup.sh new file mode 100755 index 0000000..4aadf6d --- /dev/null +++ b/abs/core-testing/linhes-scripts/mythwelcome-test-wakeup.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm" #this clears your alarm +sudo sh -c "echo `date '+%s' -d '+ 4 minutes'` > /sys/class/rtc/rtc0/wakealarm" #this writes your alarm +cat /proc/driver/rtc +cat /proc/driver/rtc > /var/log/wake_alarm +echo "Your computer is set to start up in 4 minutes using ACPI." +echo -n "Do you want to shutdown the computer now? (y/n): " +read -n 1 shutdown +if [ "$shutdown" == "y" ]; then + echo -e "\nShutting down now..." + sudo shutdown -t 5 -h now +else + echo -e "\nTo shutdown execute the following:" + echo " sudo shutdown -t 5 -h now" +fi diff --git a/abs/core-testing/linhes-scripts/pause-mythcommflag.sh b/abs/core-testing/linhes-scripts/pause-mythcommflag.sh new file mode 100755 index 0000000..4da808b --- /dev/null +++ b/abs/core-testing/linhes-scripts/pause-mythcommflag.sh @@ -0,0 +1,53 @@ +#!/bin/bash +# pause-mythcommflag.sh v0.2 05/21/09 +# Utility to automatically pause & unpause mythcommflag if CPU usage is above a certain level +# Free for any use. +# Installation: +# cp pause-mythcommflag.sh /usr/LH/bin +# chmod +x /usr/LH/bin/pause-mythcommflag.sh +# Usage: Executed from sv start pause-mythcommflag + +# Threshold for when mythcommflag will be paused +CPUTHRESHOLD=75 + +# Second Threshold for when mythcommflag is already paused +PAUSEDCPUTHRESHOLD=45 + +# Log file to write (change to /dev/null for no log) +LOG=/var/log/mythtv/pause-mythcommflag.log + +# Number of seconds to wait between checking for mythcommflag process +SLEEP=5 + +#sleep $SLEEP + +touch $LOG + +COMMFLAGSTATE=1 + +while true; do + PROCCOMMFLAG=`pidof mythcommflag` + if [ -n "${PROCCOMMFLAG}" ] + then + FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'` + if [ $COMMFLAGSTATE -eq 1 ] + then + CPUTHRESHOLD1=$CPUTHRESHOLD + else + CPUTHRESHOLD1=$PAUSEDCPUTHRESHOLD + fi + if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD1" ] + then +# echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD1%, PAUSE Commflagging" >> $LOG + kill -s STOP $PROCCOMMFLAG + COMMFLAGSTATE=0 + else +# echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD1%, CONTINUE Commflagging" >> $LOG + kill -s CONT $PROCCOMMFLAG + COMMFLAGSTATE=1 + fi +# else +# echo "No COMMFLAG Process Active" >> $LOG + fi + sleep $SLEEP +done diff --git a/abs/core-testing/linhes-scripts/pause_mythcommflag b/abs/core-testing/linhes-scripts/pause_mythcommflag new file mode 100755 index 0000000..c20f9b0 --- /dev/null +++ b/abs/core-testing/linhes-scripts/pause_mythcommflag @@ -0,0 +1,8 @@ +/var/log/mythtv/pause-mythcommflag.log { + daily + rotate 7 + notifempty + copytruncate + compress + missingok +} diff --git a/abs/core-testing/linhes-scripts/run-limit-mythcommflag b/abs/core-testing/linhes-scripts/run-limit-mythcommflag new file mode 100755 index 0000000..38ca45f --- /dev/null +++ b/abs/core-testing/linhes-scripts/run-limit-mythcommflag @@ -0,0 +1,2 @@ +#!/bin/sh +exec /usr/bin/nice -19 /usr/LH/bin/limit-mythcommflag.sh diff --git a/abs/core-testing/linhes-scripts/run-pause-mythcommflag b/abs/core-testing/linhes-scripts/run-pause-mythcommflag new file mode 100755 index 0000000..8bd25ac --- /dev/null +++ b/abs/core-testing/linhes-scripts/run-pause-mythcommflag @@ -0,0 +1,2 @@ +#!/bin/sh +exec /usr/bin/nice -19 /usr/LH/bin/pause-mythcommflag.sh diff --git a/abs/core-testing/linhes-scripts/screenshooter.sh b/abs/core-testing/linhes-scripts/screenshooter.sh new file mode 100755 index 0000000..9e35786 --- /dev/null +++ b/abs/core-testing/linhes-scripts/screenshooter.sh @@ -0,0 +1,225 @@ +#!/bin/bash + +# Written by Bob Igo from the MythTV Store at http://MythiC.TV +# with contributions from TJC and Sarah Hayes +# Email: bob@stormlogic.com +# +# If you run into problems with this script, please send me email + +# This is alpha code to auto-generate thumbnails for previews in MythVideo. +# It won't currently work on some filenames that have spaces in them. +# It's surely just a matter of escaping or quoting, but I have yet to find +# the right incantation. + +# example usage: +# find -L /myth/video -wholename '*.covers' -prune -o -name '*.resume' -o -type f -exec screenshooter.sh -v {} \; + +# limitations: +# -- +# In an MBE/SBE/FE setup this might get the settings for the wrong machine... +# The script has no AI to know if a grabbed frame is useful to identify the video, only that it was able to grab it. +# Doesn't clean up after itself if videos are deleted, though MythTV may do this on its own. +# Minimum theoretical compatible video length is 4 seconds. Shorter videos will not work with this version. +# Surely more limitations I can't think of because it's my baby :) + +Usage() { + echo "USAGE:" + echo `basename $0` "-v PATHNAME [-s SECONDS] [-c] [-b HOSTNAME] [-u USERNAME] [-p PASSWORD] [-o]" + echo "-v: pathname to Video" + echo "-s: number of Seconds to skip before capturing (270 by default)" + echo "-c: Clobber any previous screenshot found for this video (off by default)" + echo "-b: mysql server (Backend) hostname (localhost by default)" + echo "-u: mysql Username (mythtv by default)" + echo "-p: mysql Password (mythtv by default)" + echo "-o: verbOse mode (off by default)" + echo "-x: check for valid video eXtension (off by default)" + echo + echo "EXAMPLE: $0 -v /myth/video/HDTV/shuttle.mpg -c -s 30" + exit 3 +} + +if [ -z $1 ]; then + Usage +fi + +V_MISSING=1 + +while getopts "v:sbupochx" FLAG ; do + case "$FLAG" in + v) VIDEO_PATHNAME="$OPTARG" + V_MISSING=0;; + s) SKIPAHEAD="$OPTARG";; + c) CLOBBER=1;; + b) BACKEND_HOSTNAME="$OPTARG";; + u) DBUSERNAME="$OPTARG";; + p) DBPASSWORD="$OPTARG";; + o) VERBOSE=1;; + x) EXTENSION_CHECK=1;; + *) Usage;; + esac +done + +if [ $V_MISSING == 1 ]; then + Usage +fi + +# Declaring Variables here and assigning sensible defaults. + +# SKIPAHEAD is the number of seconds to skip ahead before starting the frame capture. +# Set it to an arbitrary value if none is specified. +SKIPAHEAD=${SKIPAHEAD:-"270"} +BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} +DBUSERNAME=${DBUSERNAME:-"mythtv"} +DBPASSWORD=${DBPASSWORD:-"mythtv"} +# Defaults to quiet. +VERBOSE=${VERBOSE:-0} +# Unless otherwise told, do not clobber existing cover files. +CLOBBER=${CLOBBER:-0} +# Unless otherwise told, do not check the file extension against +# MythTV's list of registered video file types. +EXTENSION_CHECK=${EXTENSION_CHECK:-0} + +VIDEO_CAPTURE_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoArtworkDir' limit 1") +if [ ! -d "$VIDEO_CAPTURE_HOME" ] ; then + echo "Directory $VIDEO_CAPTURE_HOME does not exist, nowhere to put the screen shot!" + echo "Have you configured MythVideo yet?" + exit 1 +fi + +VIDEO_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoStartupDir' limit 1") +if [ ! -d "$VIDEO_HOME" ] ; then + echo "Directory $VIDEO_HOME does not exist, nowhere to put the screen shot!" + echo "Have you configured MythVideo yet?" + exit 1 +fi + +VIDEO_FILENAME=$(basename "$VIDEO_PATHNAME") +VIDEO_EXTENSION=${VIDEO_FILENAME##*.} +# Since we cron'd lets first make sure the validity of the file +if [ "$EXTENSION_CHECK" == "1" ]; then + EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select f_ignore from videotypes where extension=\"$VIDEO_EXTENSION\";") + #excheck returns blank, it found nothing. + if [ "$EXCHECK" == "" ]; then + if [ "$VERBOSE" == "1" ]; then + echo "$VIDEO_EXTENSION does not appear to be a valid media file, skipping." + fi + exit 1 + else + # It is valid, but should we ignore it. If so then excheck will equal 1. + if [ "EXCHECK" == "1" ]; then + if [ "$VERBOSE" == "1" ]; then + echo "$VIDEO_EXTENSION is set to ignore." + fi + exit 1 + fi + # It is valid, it's not set to ignore. + if [ "$VERBOSE" == "1" ]; then + echo "$VIDEO_EXTENSION appears in the Database, checking further." + fi + EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select title from videometadata where filename=\"$VIDEO_PATHNAME\";") + #Right, the file is supposed to be playable. Has it been imported to the Db yet? + if [ "$EXCHECK" == "" ] ; then + if [ "$VERBOSE" == "1" ]; then + echo "$VIDEO_FILENAME does not exist in the database." + fi + exit 1 + # If you decide you want the system to 'auto import' the video then comment out + # the exit line and uncomment the rest of it. Bewarned, this is sucky SQL at + # the best but will give sensible defaults. + # + # if [ "$VERBOSE" == "1" ]; then + # echo "Importing $VIDEO_FILENAME in to database." + # fi + # mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "insert into videometadata (intid, title, director, plot, rating, inetref, year, userrating, length, showlevel, filename, coverfile, childid, browse, playcommand, category) values (' ', '$VIDEO_FILENAME', 'Unknown', 'Unknown', 'NR', '00000000', 1895, 0.0, 0, 1, '$VIDEO_PATHNAME', 'No Cover', -1, 1, ' ', 0);" + fi + fi +fi + +if [ "$CLOBBER" -eq 0 ]; then + # Since we're not clobbering, first check to see if this video already has a coverfile entry in MySQL: + SQL_CMD="select coverfile from videometadata where filename=\"$VIDEO_PATHNAME\";" + CURRENT_COVERFILE=`mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -B -e "$SQL_CMD" | tail -1` + + if [[ "$CURRENT_COVERFILE" != "" ]] && [[ "$CURRENT_COVERFILE" != "No Cover" ]]; then + # there's already a cover file for this video + if [ "$VERBOSE" == "1" ]; then + echo "$VIDEO_FILENAME has cover file, skipping." + fi + exit 2 + fi +fi + + +# Swap the video file extension for png. Should work assuming the extension only appears ONCE! +VIDEO_CAPTURE_PATHNAME="$VIDEO_CAPTURE_HOME/$VIDEO_FILENAME.png" + +# How many frames of video to capture. We'll grab the last frame as our screenshot. +if [ "$VIDEO_EXTENSION" == "m4v" ]; then + FRAMES_TO_CAPTURE="90" + SHOTFILE="000000"$FRAMES_TO_CAPTURE".png" +else + FRAMES_TO_CAPTURE="05" +fi + +SHOTFILE="000000"$FRAMES_TO_CAPTURE".png" +VIDEO_STATS="/tmp/screenshooter_video_stats.txt" + +cd /tmp + +# The video we're processing may be shorter than SKIPAHEAD seconds. +# Keep trying to capture until we find a SKIPAHEAD value within the length of the video. +# Give up if we reach 0 seconds. +while [ ! -f "$SHOTFILE" ]; do + /usr/bin/mplayer -ss $SKIPAHEAD -vf scale=640:-2 -ao null -vo png -quiet -frames $FRAMES_TO_CAPTURE -identify "$VIDEO_PATHNAME" &> $VIDEO_STATS & + TIMEOUT=9 + + # Some video formats will play audio only. This loop gives the above command 20 seconds to + # finish, otherwise it gets killed. + while [ -n "`ps -p $! --no-heading`" ]; do + TIMEOUT=$(expr $TIMEOUT - 1) + if [ "$TIMEOUT" -le 0 ]; then + kill -9 $! + break + fi + sleep 1 + done + + SKIPAHEAD=$(expr $SKIPAHEAD / 2) + if [ "$SKIPAHEAD" -le 0 ]; then + break + fi +done + +if [ -f "$SHOTFILE" ]; then + # Now, the video_capture is taken, and the name of the shot is in $SHOTFILE + # Rename it and move it to the place where video_captures live. + /bin/mv -f "$SHOTFILE" "$VIDEO_CAPTURE_PATHNAME" + /bin/rm -f 000000*png + chown mythtv: "$VIDEO_CAPTURE_PATHNAME" + + # We've got the shotfile nailed, now calculate video run length. + VIDEO_LENGTH_IN_SECONDS=`grep ID_LENGTH $VIDEO_STATS | awk -F'=' '{print $2}'` + VIDEO_LENGTH_IN_INTEGER_SECONDS=${VIDEO_LENGTH_IN_SECONDS/%.*/} + if [ $VIDEO_LENGTH_IN_INTEGER_SECONDS -lt 60 ]; then + VIDEO_LENGTH_IN_MINUTES="1" + else + VIDEO_LENGTH_IN_MINUTES=$(expr $VIDEO_LENGTH_IN_INTEGER_SECONDS / 60) + fi + + SQL_CMD="update videometadata set length=\"$MIN_LENGTH\" where filename=\"$VIDEO_PATHNAME\";" + mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD" + + + # put the screenshot pathname and any runlength info into videometadatatable + + # Pre-escape any single or double quotes for the SQL command. + + VIDEO_CAPTURE_PATHNAME=`echo $VIDEO_CAPTURE_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' ` + VIDEO_PATHNAME=`echo $VIDEO_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' ` + SQL_CMD="update videometadata set coverfile=\"$VIDEO_CAPTURE_PATHNAME\", length=\"$VIDEO_LENGTH_IN_MINUTES\" where filename=\"$VIDEO_PATHNAME\";" + + mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD" +else + echo "No image could be captured from $VIDEO_PATHNAME" + exit 1 +fi diff --git a/abs/core-testing/linhes-scripts/scripts/770-wrapper.sh b/abs/core-testing/linhes-scripts/scripts/770-wrapper.sh deleted file mode 100755 index 65573f4..0000000 --- a/abs/core-testing/linhes-scripts/scripts/770-wrapper.sh +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/bash -# 770-wrapper.sh by Cecil Watsona -# Modifed from -# pdatranscode -# -# created by Jeff Volckaert (inspired by Zach White) -# modified 01/16/06 -VIDEODIR=$1 -FILENAME=$2 -TITLE=$3 -# Remove non-alpha characters from TITLE -TITLE=${TITLE//[^a-zA-Z0-9]/} -STARTTIME=$4 -DIROUT=/myth/n770 - -# Sanity checking, to make sure everything is in order. -if [ -z "$VIDEODIR" -o -z "$FILENAME" ]; then - echo "Usage: $0 <VideoDirectory> <FileName> "<Title>" <Starttime>" - exit 5 -fi -if [ ! -f $VIDEODIR/$FILENAME ]; then - echo "File does not exist: $VIDEODIR/$FILENAME" - exit 6 -fi - -# Transcode the file - - -perl /usr/local/bin/770-encode.pl -q -p mplayer $VIDEODIR/$FILENAME $DIROUT/$TITLE-$STARTTIME.avi - -chmod 664 $DIROUT/$TITLE-$STARTTIME.avi - -ERROR=$? -if [ $ERROR -ne 0 ]; then - echo "Transcoding failed for ${FILENAME} with error $ERROR" - exit 3 -fi diff --git a/abs/core-testing/linhes-scripts/scripts/idle.sh b/abs/core-testing/linhes-scripts/scripts/idle.sh deleted file mode 100755 index f95b9fa..0000000 --- a/abs/core-testing/linhes-scripts/scripts/idle.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/bash - -usage () { - echo "Usage: $0 [-h] [-s] [-t <minutes_needed>]" - echo - echo "-h - Print this help/usage message and quit" - echo "-s - Run silently (default is verbose)" - echo "-t - Minutes of idle time needed (default is 20)" - echo "-v - Be more verbose for debugging" - echo - echo "Silent mode is recommended for use in cron jobs or scripts." - exit $1 -} - -msg () { # A status reporting function - [ "$VERBOSE" -ne 0 ] && echo "$*" -} - -mysql_cmd () { - /usr/bin/mysql -u root mythconverg -sBe "$*" -} - -# Command line argument handling -VERBOSE=1 -TIME_BEFORE=20 -TIME_AFTER=5 # Only adjustable by editing here - -while getopts "hst:v" OPT ; do - case $OPT in - h) usage 0 ;; - s) VERBOSE=0 ;; - t) TIME_BEFORE=$OPTARG ;; - v) VERBOSE=2 ;; - *) usage 1 ;; - esac -done -# Check for extra cruft on the command line... -shift $(($OPTIND - 1)) -[ -n "$*" ] && usage 1 - -msg "Checking what MythTV is doing now or plans within $TIME_BEFORE minutes..." -msg - -/usr/bin/mythshutdown -s 1 -BUSY="$?" -msg "mythshutdown returned $BUSY" -# Ignore certain non-zero flag values -BUSY=$(($BUSY & 0x2F)) - -SCHEMALOCK=$(mysql_cmd "select count(*) from schemalock") -msg "schemalock $SCHEMALOCK" - -JOBS=$(mysql_cmd "select count(*) from jobqueue where status = 4") -msg "running jobs $JOBS" - -INUSE=$(mysql_cmd "select count(*) from inuseprograms") -msg "inuse programs $INUSE" - -POTENTIAL=$(mysql_cmd "select count(*) from recordmatch as rm, program as p - where rm.chanid = p.chanid and rm.starttime = p.starttime - and rm.starttime < now() + interval $TIME_BEFORE minute - and now() < p.endtime + interval $TIME_AFTER minute") -msg "potential recordings $POTENTIAL" -# See if any of the potential upcoming recordings are real. -# This is ugly, but only the backend knows what programs it really -# plans to record or ignore, so we can't just check the DB. :-( -if [ "$VERBOSE" -ge 2 ] ; then - mysql_cmd "select p.starttime, p.endtime, p.title, subtitle - from recordmatch as rm, program as p - where rm.chanid = p.chanid and rm.starttime = p.starttime - and rm.starttime < now() + interval $TIME_BEFORE minute - and now() < p.endtime + interval $TIME_AFTER minute - order by p.starttime, p.endtime" -fi -UPCOMING=$(/usr/bin/mythbackend --printsched 2>&1 | - /bin/awk -v potential=$POTENTIAL ' - BEGIN {item=-1;real=0} - /--- print list start ---/,/--- print list end ---/ { - if (item>0 && item<=potential && substr($0,70,1) ~ "[0-9]") real+=1; - item += 1; - } - END {print real} -') -msg "planned recordings $UPCOMING" -if [ "$VERBOSE" -ge 2 ] ; then - /usr/bin/mythbackend --printsched 2>&1 | - /bin/awk -v potential=$POTENTIAL ' - BEGIN {item=-1} - /--- print list start ---/,/--- print list end ---/ { - if (item>0 && item<=potential) print $0; - item += 1; - }' -fi -activities=$(($BUSY + $SCHEMALOCK + $JOBS + $INUSE + $UPCOMING)) -msg -if [ "$activities" -eq 0 ] ; then - msg "System is idle" - exit 0 -else - msg "System is busy" - exit 1 -fi diff --git a/abs/core-testing/linhes-scripts/scripts/importfiles.sh b/abs/core-testing/linhes-scripts/scripts/importfiles.sh deleted file mode 100755 index 84f1ab5..0000000 --- a/abs/core-testing/linhes-scripts/scripts/importfiles.sh +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/bash -export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" - -DVD_or_CD=`cat /proc/mounts |grep iso9660|awk '{print $2}'|tail -1` -if [ "$DVD_or_CD" != "" ]; then - echo "Copying files from $DVD_or_CD to /myth/video." > /tmp/screens - echo "This could take several minutes, depending on the" >> /tmp/screens - echo "speed and size of your optical media." >> /tmp/screens - cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=0 & - /bin/cp -R $DVD_or_CD/* /myth/video/ - killall osd_cat - echo "Copied videos from $DVD_or_CD to /myth/video" > /tmp/screens - cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=2 & -else - echo "No optical media found. If you just inserted" > /tmp/screens - echo "your media, please wait a moment and try again." >> /tmp/screens - cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=5 & -fi diff --git a/abs/core-testing/linhes-scripts/scripts/limit-mythcommflag.sh b/abs/core-testing/linhes-scripts/scripts/limit-mythcommflag.sh deleted file mode 100755 index 8ca61c7..0000000 --- a/abs/core-testing/linhes-scripts/scripts/limit-mythcommflag.sh +++ /dev/null @@ -1,54 +0,0 @@ -#!/bin/bash -# limit-mythcommflag.sh v0.1 05/17/09 -# Utility to automatically limit mythcommflag if CPU usage is above a certain level. -# Uses cpulimit from http://cpulimit.sourceforge.net/ -# Free for any use. -# Installation: -# cp limit-mythcommflag.sh /usr/LH/bin -# chmod +x /usr/LH/bin/limit-mythcommflag.sh -# Usage: Executed from runit limit-mythcommflag at boot - -# Threshold for when mythcommflag will be paused -CPUTHRESHOLD=43 - -# Limit mythcommflag to percentage -LIMITCPU=20 - -# Log file to write (use /dev/null for no log) -#LOG=/var/log/mythtv/limit-mythcommflag.log -LOG=/dev/null - -# Number of seconds to wait between checking for mythcommflag process -SLEEP=5 - -#sleep $SLEEP - -touch $LOG - -ALREADYLIMITED=0 - -while true; do - PROCCOMMFLAG=`pidof mythcommflag` - if [ -n "${PROCCOMMFLAG}" ] - then - FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'` - if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD" ] - then - echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD%, LIMIT Commflagging" # >> $LOG - if [ $ALREADYLIMITED -eq 0 ]; then - cpulimit -e mythcommflag -l $LIMITCPU & - cpulimit_pid=$! - ALREADYLIMITED=1 - fi - else - echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD%, UNLIMIT Commflagging" #>> $LOG - if [ $ALREADYLIMITED -eq 1 ]; then - kill $cpulimit_pid - ALREADYLIMITED=0 - fi - fi -# else -# echo "No COMMFLAG Process Active" >> $LOG - fi - sleep $SLEEP -done diff --git a/abs/core-testing/linhes-scripts/scripts/mplayer-resumer-vdpau.pl b/abs/core-testing/linhes-scripts/scripts/mplayer-resumer-vdpau.pl deleted file mode 100755 index 9c82158..0000000 --- a/abs/core-testing/linhes-scripts/scripts/mplayer-resumer-vdpau.pl +++ /dev/null @@ -1,204 +0,0 @@ -#!/usr/bin/perl - -use Shell; -use strict; -use POSIX qw(floor); - -# Written by Bob Igo from the MythTV Store at http://MythiC.TV -# Email: bob@stormlogic.com -# -# If you run into problems with this script, please send me email - -# CHANGE LOG: -# 3/9/2009 -# Modded Bob's wonderful resumer script to work with the vdpau -# options detector script someone anonymously posted to the wiki -# -# http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo -# -# You need to have both this and the vdpau-detector script in the same -# dir for this to work properly. Also, change your default mplayer -# options in mythfrontend to read simply: # mplayer-resumer-vdpau.pl %s -# -# To tweak the shell commands for mplayer, edit the vdpau-detector script. -# It has a small README inside it as comments -# ENJOY! - -# 5/3/2006 -# Added last time started checking. -# If this script is restarted within $tdiff (default 5 seconds) -# then it will delete the file used to keep track of the videos -# resume position. - -# PURPOSE: -# -------------------------- -# This is a wrapper script to prove the concept of having MythTV -# resume playback of previously-stopped video where you left off. -# It's likely that a good solution will look different than this -# initial code. - -# RATIONALE: -# -------------------------- -# Watching 90% of a video and stopping causes you to return to the -# beginning again the next time you watch it. Remembering where -# you were in the video and resuming at that position is a much nicer -# behavior for the user. -# -# By default, mplayer spits out timecode information that tells you -# where you are in the video, to the tenth of a second. Mplayer also -# supports a seek feature on the command-line. We can make use of these -# features to write an mplayer wrapper that will remember the last -# position in a video file and resume to it on playback. - -# PARAMETERS: -# -------------------------- -# see print_usage() below - -# FILES: -# -------------------------- -# $infile, the video to play -# $resumefile, the video's resume file (see get_resume_filename() below) - -# KNOWN ISSUES: -# -------------------------- -# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything -# captured via an HDTV tuner card and put into your /myth/video directory -# will fail with this resumer. -# -# Current theories include the timecode having to do with the show's broadcast -# time, recording time, or perhaps its upload time to the station that -# broadcast it. - -# DESIGN LIMITATION: -# ------------------------- -# If the video file to be played is on a read-only filesystem, or otherwise -# lives in a location that cannot be written to, resume will fail. This is -# because the current implementation uses a file parallel to the video file -# to store the timecode. -# - -my $infile; -my $resumefile; -my $mplayer_parameters; -my $fudge_factor=2; # number of additional seconds to skip back before playback -my $tnow; # Time now. -my $tprev; # Time the prog was last started. - # Returned from the modification time of the xx.resume file. -my $tdiff=5; # How many seconds before we should start from - # the beginning of the movie -#DEBUG -#open(DEBUG,">/tmp/debug") || die "unable to open debug file"; - -sub init () { - $tnow = time(); - $infile = @ARGV[$#ARGV]; - - $resumefile = &get_resume_filename($infile); - # This returns the 9th element of the 13 element array - # created by the stat function. - $tprev = (stat ($resumefile))[9]; - # if this file is restarted in less than 5 seconds then - # remove the .resume file - if ( ($tnow - $tprev) < $tdiff ) { - unlink($resumefile); - } - - $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]); -} - -&init(); -&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile); - -#close(DEBUG); - -# For $pathname, return $path.$filename.resume -sub get_resume_filename () { - my($pathname)=@_; - - my $idx = rindex($pathname,"/"); - - if ($idx == -1) { # There was no "/" in $pathname - return ".".$pathname.".resume"; - } else { - # Now we need to split out the path from the filename. - my $path = substr($pathname,0,$idx+1); - my $filename = substr($pathname,$idx+1); - return "$path.$filename.resume"; - } -} - -# Calls mplayer and returns the last known video position -sub mplayer () { - my($parameters,$infile)=@_; - my $seconds=0; - my $timecode=&get_time_offset($infile); - my $mplayeropts=`./vdpau-detector $infile`; chomp $mplayeropts; - my @lines = split "\n", $mplayeropts; - my $last_line = pop(@lines); - my $command = "mplayer $last_line $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |"; - - open(SHELL, $command); - # The kind of line we care about looks like this example: - # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68% - # But all we care to look at is the first number. - - while (<SHELL>) { - #print DEBUG $_; - if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it - my $last_timecode_line = &extract_last_timecode_line($_); - if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) { - $seconds=$1; - } - } - } - close(SHELL); - - return $seconds; - - sub extract_last_timecode_line () { - my ($line)=@_; - my @lines=split('A:',$line); - return @lines[$#lines-1]; - } -} - -# Save the last known video position -sub save_time_offset () { - my($seconds, $resumefile)=@_; - - open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing"; - print RESUMEFILE "$seconds"; - close(RESUMEFILE); -} - -# returns the number of seconds corresponding to the last known video position, -# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer -sub get_time_offset () { - my($videofile)=@_; - my($resumefile) = &get_resume_filename($videofile); - my $seconds=0; - my $timecode; - - open(RESUMEFILE, "<$resumefile") || return "00:00:00"; - while(<RESUMEFILE>) { - $seconds=$_; - } - close(RESUMEFILE); - - my $hours = floor($seconds/3600); - $seconds = $seconds - $hours*3600; - - my $minutes = floor($seconds/60); - $seconds = int($seconds - $minutes*60) - $fudge_factor; - - $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds; -# print "TIMECODE: $timecode\n"; - return $timecode; -} - -sub print_usage () { - print "USAGE:\n"; - print "\t",$ARGV[0], "[mplayer parameters] video_file\n"; - print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n"; - print "\t","Version 3/9/2009\n"; -} diff --git a/abs/core-testing/linhes-scripts/scripts/mplayer-resumer.pl b/abs/core-testing/linhes-scripts/scripts/mplayer-resumer.pl deleted file mode 100755 index c785a25..0000000 --- a/abs/core-testing/linhes-scripts/scripts/mplayer-resumer.pl +++ /dev/null @@ -1,188 +0,0 @@ -#!/usr/bin/perl - -use Shell; -use strict; -use POSIX qw(floor); - -# Written by Bob Igo from the MythTV Store at http://MythiC.TV -# Email: bob@stormlogic.com -# -# If you run into problems with this script, please send me email - -# PURPOSE: -# -------------------------- -# This is a wrapper script to prove the concept of having MythTV -# resume playback of previously-stopped video where you left off. -# It's likely that a good solution will look different than this -# initial code. - -# RATIONALE: -# -------------------------- -# Watching 90% of a video and stopping causes you to return to the -# beginning again the next time you watch it. Remembering where -# you were in the video and resuming at that position is a much nicer -# behavior for the user. -# -# By default, mplayer spits out timecode information that tells you -# where you are in the video, to the tenth of a second. Mplayer also -# supports a seek feature on the command-line. We can make use of these -# features to write an mplayer wrapper that will remember the last -# position in a video file and resume to it on playback. - -# PARAMETERS: -# -------------------------- -# see print_usage() below - -# FILES: -# -------------------------- -# $infile, the video to play -# $resumefile, the video's resume file (see get_resume_filename() below) - -# KNOWN ISSUES: -# -------------------------- -# Mplayer misreports the timecodes on .nuv MPEG-2 files. Currently, anything -# captured via an HDTV tuner card and put into your /myth/video directory -# will fail with this resumer. -# -# Current theories include the timecode having to do with the show's broadcast -# time, recording time, or perhaps its upload time to the station that -# broadcast it. - -# DESIGN LIMITATION: -# ------------------------- -# If the video file to be played is on a read-only filesystem, or otherwise -# lives in a location that cannot be written to, resume will fail. This is -# because the current implementation uses a file parallel to the video file -# to store the timecode. -# - -# CHANGE LOG: -# 5/3/2006 -# Added last time started checking. -# If this script is restarted within $tdiff (default 5 seconds) -# then it will delete the file used to keep track of the videos -# resume position. - - -my $infile; -my $resumefile; -my $mplayer_parameters; -my $fudge_factor=2; # number of additional seconds to skip back before playback -my $tnow; # Time now. -my $tprev; # Time the prog was last started. - # Returned from the modification time of the xx.resume file. -my $tdiff=5; # How many seconds before we should start from - # the beginning of the movie -#DEBUG -#open(DEBUG,">/tmp/debug") || die "unable to open debug file"; - -sub init () { - $tnow = time(); - $infile = @ARGV[$#ARGV]; - - $resumefile = &get_resume_filename($infile); - # This returns the 9th element of the 13 element array - # created by the stat function. - $tprev = (stat ($resumefile))[9]; - # if this file is restarted in less than 5 seconds then - # remove the .resume file - if ( ($tnow - $tprev) < $tdiff ) { - unlink($resumefile); - } - - $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]); -} - -&init(); -&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile); - -#close(DEBUG); - -# For $pathname, return $path.$filename.resume -sub get_resume_filename () { - my($pathname)=@_; - - my $idx = rindex($pathname,"/"); - - if ($idx == -1) { # There was no "/" in $pathname - return ".".$pathname.".resume"; - } else { - # Now we need to split out the path from the filename. - my $path = substr($pathname,0,$idx+1); - my $filename = substr($pathname,$idx+1); - return "$path.$filename.resume"; - } -} - -# Calls mplayer and returns the last known video position -sub mplayer () { - my($parameters,$infile)=@_; - my $seconds=0; - my $timecode=&get_time_offset($infile); - my $command = "mplayer $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |"; - - open(SHELL, $command); - # The kind of line we care about looks like this example: - # A:1215.2 V:1215.2 A-V: 0.006 ct: 0.210 207/201 13% 0% 1.9% 0 0 68% - # But all we care to look at is the first number. - - while (<SHELL>) { - #print DEBUG $_; - if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it - my $last_timecode_line = &extract_last_timecode_line($_); - if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) { - $seconds=$1; - } - } - } - close(SHELL); - - return $seconds; - - sub extract_last_timecode_line () { - my ($line)=@_; - my @lines=split('A:',$line); - return @lines[$#lines-1]; - } -} - -# Save the last known video position -sub save_time_offset () { - my($seconds, $resumefile)=@_; - - open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing"; - print RESUMEFILE "$seconds"; - close(RESUMEFILE); -} - -# returns the number of seconds corresponding to the last known video position, -# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer -sub get_time_offset () { - my($videofile)=@_; - my($resumefile) = &get_resume_filename($videofile); - my $seconds=0; - my $timecode; - - open(RESUMEFILE, "<$resumefile") || return "00:00:00"; - while(<RESUMEFILE>) { - $seconds=$_; - } - close(RESUMEFILE); - - my $hours = floor($seconds/3600); - $seconds = $seconds - $hours*3600; - - my $minutes = floor($seconds/60); - $seconds = int($seconds - $minutes*60) - $fudge_factor; - - $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds; -# print "TIMECODE: $timecode\n"; - return $timecode; -} - -sub print_usage () { - print "USAGE:\n"; - print "\t",$ARGV[0], "[mplayer parameters] video_file\n"; - print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n"; - print "\t","Version 5/3/2006\n"; -} diff --git a/abs/core-testing/linhes-scripts/scripts/myth2mp3 b/abs/core-testing/linhes-scripts/scripts/myth2mp3 deleted file mode 100755 index 89181c1..0000000 --- a/abs/core-testing/linhes-scripts/scripts/myth2mp3 +++ /dev/null @@ -1,82 +0,0 @@ -#!/bin/sh -# convert recordings to as mp3 audio only -# version 0.9 - -# usage: -# first parameter must be %DIR%/%FILE% of the recording -# second parameter must be the desired base name of the output -# third parameter must be %CHANID% if you set USECUTLIST=Y -# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y -# In the mythtv setup screen invoke this script like this: -# MYTHTV User Job Command: -# /usr/LH/bin/myth2mp3 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" - -# options: -BITRATE=256k #ie. 128k, 160k, 192k, 224k, 256k -USECUTLIST=Y #Y or N - -# where the converted audio is stored -OUT_DIR=/myth/music - -# create temp filename so multiple instances won't conflict -TMPNAME=toMP3-$$ -TMPFILE=/myth/tmp/$TMPNAME.mp3 -TMPCUTFILE=/myth/tmp/$TMPNAME.mpg -FFINPUTFILE=$1 - -# log file location -LOGFILE=/var/log/mythtv/myth2mp3.log -CDate="`date`" -echo "" >> $LOGFILE -echo $CDate >> $LOGFILE -echo "File to encode: $1 Name: $2" >> $LOGFILE - -# start timer -beforetime="$(date +%s)" - -# check if using cutlist -if [ $USECUTLIST = Y ];then - MYTHCOMMFRAMES=`mythcommflag --getcutlist -f "$FFINPUTFILE" | grep 'Cutlist:' | cut -d \ -f 2` - if [ -n "$MYTHCOMMFRAMES" ]; then - echo "Extracting Cutlist..." >> $LOGFILE - /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist - FFINPUTFILE=$TMPCUTFILE - fi -fi - -# run ffmpeg to do conversion -echo "Encoding..." >> $LOGFILE -/usr/bin/nice -n19 /usr/bin/ffmpeg -i "$FFINPUTFILE" -vn -acodec libmp3lame -ab $BITRATE -ar 44100 -ac 2 "$TMPFILE" -ERROR=$? - -# make output filename unique -OUTPUTFILE=$OUT_DIR/$2.mp3 -i=1 -while [ -e "$OUTPUTFILE" ] -do - OUTPUTFILE=$OUT_DIR/$2-$i.mp3 - i=`expr $i + 1` -done - -# move temp file to output location -chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" - -# stop timer -aftertime="$(date +%s)" -seconds="$(expr $aftertime - $beforetime)" - -if [ $ERROR -eq 0 ]; then - echo "File Encoded Sucessfully: $OUTPUTFILE" >> $LOGFILE - hours=$((seconds / 3600)) - seconds=$((seconds % 3600)) - minutes=$((seconds / 60)) - seconds=$((seconds % 60)) - echo "Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" >> $LOGFILE -else - echo "ERROR: $ERROR" >> $LOGFILE -fi - -# clean up left over files -unlink $TMPFILE 2> /dev/null -unlink $TMPCUTFILE 2> /dev/null -unlink $TMPCUTFILE.map 2> /dev/null diff --git a/abs/core-testing/linhes-scripts/scripts/myth2x264 b/abs/core-testing/linhes-scripts/scripts/myth2x264 deleted file mode 100755 index 014fcbe..0000000 --- a/abs/core-testing/linhes-scripts/scripts/myth2x264 +++ /dev/null @@ -1,223 +0,0 @@ -#!/bin/sh -# convert recording to x264 encoded avi -# version 0.6 - -# usage: -# first parameter must be %DIR%/%FILE% of the recording -# second parameter must be the desired base name of the output -# third parameter must be %CHANID% if you set USECUTLIST=Y -# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y -# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV -# in the mythtv setup screen invoke this script like this: -# MYTHTV User Job Command: -# /usr/LH/bin/myth2x264 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%" - -# options: -RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544) -BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000) -USECUTLIST=Y # Y or N - -# where the converted video is stored -OUT_DIR=/myth/video - -# database settings -BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} -DBUSERNAME=${DBUSERNAME:-"mythtv"} -DBPASSWORD=${DBPASSWORD:-"mythtv"} -SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e" - -#------FUNCTIONS--------------- -update_comment() -# Arg_1 = COMMENT -{ -if [ $NO_JOBID = 0 ]; then - `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"` -fi -} - -update_status() -# Arg_1 = status code -{ -if [ $NO_JOBID = 0 ]; then - `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"` -fi -} - -check_background_progress() -# check mencoder progress in background -# Arg_1 = PROGRESS CALCULATION -{ -while [ `tail -1 $STATUSFILE | grep -c "^x264 \[info\]: kb/s:"` = 0 ] -do - sleep 10 - check_myth_jobcmds - current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"` - prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'` - current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'` - if [ -n "$prog_percent" ]; then - prog_percent=`expr $prog_percent / $1` - echo "$prog_percent% Completed @ $current_FPS fps" - update_comment "$prog_percent% Completed @ $current_FPS fps" - fi - sleep 10 -done -} - -check_myth_jobcmds() -# check the myth database for stop pause or resume commands -{ -if [ $NO_JOBID = 0 ]; then - CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'` - case "$CURRENT_CMD" in - # JOB_RUN - 0) ;; - # JOB_PAUSE - 1) update_status 6 - kill -s STOP $mencoder_pid ;; - # JOB_RESUME - 2) update_status 4 - `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` - kill -s CONT $mencoder_pid ;; - # JOB_STOP - 4) update_status 5 - `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` - kill -9 $mencoder_pid $command_pid - clean_up_files - echo "Encode Cancelled" >> $LOGFILE - update_status 320 - exit ;; - esac -fi -} - -get_mencoder_pid() -{ -process_name="" -i1=1 -while [ "$process_name" != "found" ]; do - if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then - process_name="found" - else - mencoder_pid=`expr $mencoder_pid + 1` - fi - i1=`expr $i1 + 1` - if [ $i1 -gt 20 ]; then - break - fi -done -} - -clean_up_files() -# clean up left over files -{ -unlink $TMPFILE 2> /dev/null -unlink $TMPCUTFILE 2> /dev/null -unlink $TMPCUTFILE.map 2> /dev/null -unlink $TWOPASSFILE 2> /dev/null -unlink $TWOPASSFILE.tmp 2> /dev/null -unlink $STATUSFILE 2> /dev/null -unlink $MENCODER_RETURN_CODE 2> /dev/null -unlink $MENCODER_RETURN_CODE_2 2> /dev/null -} - -#-------MAIN SCRIPT------------ - -# check if %JOBID% is passed from command line -JOBID=$5 -if [ -z "$JOBID" ]; then - NO_JOBID=1 -else - NO_JOBID=0 -fi - -# create temp filename so multiple instances won't conflict -TMPNAME=toX264-$$ -TMPFILE=/myth/tmp/$TMPNAME.avi -TMPCUTFILE=/myth/tmp/$TMPNAME.mpg -MENINPUTFILE=$1 -TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log -STATUSFILE=/myth/tmp/$TMPNAME-status.log -MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code -MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2 - -# log file location -LOGFILE=/var/log/mythtv/myth2x264.log -CDate="`date`" -echo "" >> $LOGFILE -echo $CDate >> $LOGFILE -echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE - -# start timer -beforetime="$(date +%s)" - -check_myth_jobcmds - -# check if using cutlist -if [ $USECUTLIST = Y ]; then - MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2` - if [ -n "$MYTHCOMMFRAMES" ]; then - echo "Extracting Cutlist..." >> $LOGFILE - update_comment "Extracting Cutlist" - /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist - MENINPUTFILE=$TMPCUTFILE - fi -fi - -# run mencoder in background to do 1st pass conversion -echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE -( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ --oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \ --x264encopts threads=auto:pass=1:turbo=1:subq=1:frameref=1:bframes=3:bitrate=$BITRATE \ --o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) & -mencoder_pid=$! -command_pid=$mencoder_pid -get_mencoder_pid - -check_background_progress "2" - -# run mencoder in background to do 2nd pass conversion -echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE -( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ --oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \ --x264encopts threads=auto:pass=2:subq=5:8x8dct:frameref=3:bframes=3:b_pyramid:weight_b:bitrate=$BITRATE \ --o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) & -mencoder_pid=$! -command_pid=$mencoder_pid -get_mencoder_pid - -check_background_progress "2 + 50" - -ERROR=$? - -# make output filename unique -OUTPUTFILE=$OUT_DIR/$2.avi -i=1 -while [ -e "$OUTPUTFILE" ] -do - OUTPUTFILE=$OUT_DIR/$2-$i.avi - i=`expr $i + 1` -done - -# move temp file to output location -chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" - -# stop timer -aftertime="$(date +%s)" -seconds="$(expr $aftertime - $beforetime)" - -if [ $ERROR -eq 0 ]; then - echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE - hours=$((seconds / 3600)) - seconds=$((seconds % 3600)) - minutes=$((seconds / 60)) - seconds=$((seconds % 60)) - echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE - update_status 272 - update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" -else - update_status 304 - update_comment "Encode Failed. Exit status: $ERROR" - echo "ERROR: $ERROR" >> $LOGFILE -fi - -clean_up_files diff --git a/abs/core-testing/linhes-scripts/scripts/myth2xvid b/abs/core-testing/linhes-scripts/scripts/myth2xvid deleted file mode 100755 index d0fcb42..0000000 --- a/abs/core-testing/linhes-scripts/scripts/myth2xvid +++ /dev/null @@ -1,223 +0,0 @@ -#!/bin/sh -# convert recording to xvid encoded avi -# version 1.3 - -# usage: -# first parameter must be %DIR%/%FILE% of the recording -# second parameter must be the desired base name of the output -# third parameter must be %CHANID% if you set USECUTLIST=Y -# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y -# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV -# in the mythtv setup screen invoke this script like this: -# MYTHTV User Job Command: -# /usr/LH/bin/myth2xvid "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%" - -# options: -RESOLUTION=960:544 # to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544) -BITRATE=2500 # use negative bitrate to set output file size in KB (ie. -700000) -USECUTLIST=Y # Y or N - -# where the converted video is stored -OUT_DIR=/myth/video - -# database settings -BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} -DBUSERNAME=${DBUSERNAME:-"mythtv"} -DBPASSWORD=${DBPASSWORD:-"mythtv"} -SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e" - -#------FUNCTIONS--------------- -update_comment() -# Arg_1 = COMMENT -{ -if [ $NO_JOBID = 0 ]; then - `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"` -fi -} - -update_status() -# Arg_1 = status code -{ -if [ $NO_JOBID = 0 ]; then - `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"` -fi -} - -check_background_progress() -# check mencoder progress in background -# Arg_1 = PROGRESS CALCULATION -{ -while [ `tail -1 $STATUSFILE | grep -c "^Audio stream:"` = 0 ] -do - sleep 10 - check_myth_jobcmds - current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"` - prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'` - current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'` - if [ -n "$prog_percent" ]; then - prog_percent=`expr $prog_percent / $1` - echo "$prog_percent% Completed @ $current_FPS fps" - update_comment "$prog_percent% Completed @ $current_FPS fps" - fi - sleep 10 -done -} - -check_myth_jobcmds() -# check the myth database for stop pause or resume commands -{ -if [ $NO_JOBID = 0 ]; then - CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'` - case "$CURRENT_CMD" in - # JOB_RUN - 0) ;; - # JOB_PAUSE - 1) update_status 6 - kill -s STOP $mencoder_pid ;; - # JOB_RESUME - 2) update_status 4 - `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` - kill -s CONT $mencoder_pid ;; - # JOB_STOP - 4) update_status 5 - `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` - kill -9 $mencoder_pid $command_pid - clean_up_files - echo "Encode Cancelled" >> $LOGFILE - update_status 320 - exit ;; - esac -fi -} - -get_mencoder_pid() -{ -process_name="" -i1=1 -while [ "$process_name" != "found" ]; do - if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then - process_name="found" - else - mencoder_pid=`expr $mencoder_pid + 1` - fi - i1=`expr $i1 + 1` - if [ $i1 -gt 20 ]; then - break - fi -done -} - -clean_up_files() -# clean up left over files -{ -unlink $TMPFILE 2> /dev/null -unlink $TMPCUTFILE 2> /dev/null -unlink $TMPCUTFILE.map 2> /dev/null -unlink $TWOPASSFILE 2> /dev/null -unlink $TWOPASSFILE.tmp 2> /dev/null -unlink $STATUSFILE 2> /dev/null -unlink $MENCODER_RETURN_CODE 2> /dev/null -unlink $MENCODER_RETURN_CODE_2 2> /dev/null -} - -#-------MAIN SCRIPT------------ - -# check if %JOBID% is passed from command line -JOBID=$5 -if [ -z "$JOBID" ]; then - NO_JOBID=1 -else - NO_JOBID=0 -fi - -# create temp filename so multiple instances won't conflict -TMPNAME=toXVID-$$ -TMPFILE=/myth/tmp/$TMPNAME.avi -TMPCUTFILE=/myth/tmp/$TMPNAME.mpg -MENINPUTFILE=$1 -TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log -STATUSFILE=/myth/tmp/$TMPNAME-status.log -MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code -MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2 - -# log file location -LOGFILE=/var/log/mythtv/myth2xvid.log -CDate="`date`" -echo "" >> $LOGFILE -echo $CDate >> $LOGFILE -echo "File to encode: $MENINPUTFILE Name: $2" >> $LOGFILE - -# start timer -beforetime="$(date +%s)" - -check_myth_jobcmds - -# check if using cutlist -if [ $USECUTLIST = Y ]; then - MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \ -f 2` - if [ -n "$MYTHCOMMFRAMES" ]; then - echo "Extracting Cutlist..." >> $LOGFILE - update_comment "Extracting Cutlist" - /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist - MENINPUTFILE=$TMPCUTFILE - fi -fi - -# run mencoder in background to do 1st pass conversion -echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE -( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ --oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \ --xvidencopts pass=1:vhq=0:turbo:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \ --o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) & -mencoder_pid=$! -command_pid=$mencoder_pid -get_mencoder_pid - -check_background_progress "2" - -# run mencoder in background to do 2nd pass conversion -echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE -( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \ --oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \ --xvidencopts pass=2:vhq=0:bvhq=1:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \ --o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) & -mencoder_pid=$! -command_pid=$mencoder_pid -get_mencoder_pid - -check_background_progress "2 + 50" - -ERROR=$? - -# make output filename unique -OUTPUTFILE=$OUT_DIR/$2.avi -i=1 -while [ -e "$OUTPUTFILE" ] -do - OUTPUTFILE=$OUT_DIR/$2-$i.avi - i=`expr $i + 1` -done - -# move temp file to output location -chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE" - -# stop timer -aftertime="$(date +%s)" -seconds="$(expr $aftertime - $beforetime)" - -if [ $ERROR -eq 0 ]; then - echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE - hours=$((seconds / 3600)) - seconds=$((seconds % 3600)) - minutes=$((seconds / 60)) - seconds=$((seconds % 60)) - echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE - update_status 272 - update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" -else - update_status 304 - update_comment "Encode Failed. Exit status: $ERROR" - echo "ERROR: $ERROR" >> $LOGFILE -fi - -clean_up_files \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/scripts/mythwelcome-set-alarm.sh b/abs/core-testing/linhes-scripts/scripts/mythwelcome-set-alarm.sh deleted file mode 100755 index 6dbd39e..0000000 --- a/abs/core-testing/linhes-scripts/scripts/mythwelcome-set-alarm.sh +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -#$1 is the first argument to the script. It is the time in seconds since 1970 -#This is defined in mythwelcome with the time_t argument - -# Configure mythwelcome --setup page: -# Command to Set Wakeup Time: sudo sh -c "/usr/LH/bin/mythwelcome-set-alarm.sh $time" -# Wakeup Time Format: time_t -# nvram-wakeup Restart Command: Leave this blank -# Command to reboot: sudo /sbin/reboot -# Command to shutdown: sudo /sbin/poweroff -# Command to run Xterm: xterm -# Command to start the Frontend: /usr/bin/mythfrontend -l /var/log/mythtv/mythfrontend.log - -# Configure mythtv-setup Shutdown/Wakeup Options page: -# Idletimeout (secs): any value greater that 0 -# Wakeup time format: yyyy-MM-dd:hh:mm -# Set wakeup time command: /usr/bin/mythshutdown --setwakeup $time -# Server Halt command: /usr/bin/mythshutdown --shutdown -# Pre shutdown check command: /usr/bin/mythshutdown --check - -echo 0 > /sys/class/rtc/rtc0/wakealarm #this clears your alarm -echo $1 > /sys/class/rtc/rtc0/wakealarm #this writes your alarm -cat /proc/driver/rtc > /var/log/wake_alarm diff --git a/abs/core-testing/linhes-scripts/scripts/mythwelcome-test-wakeup.sh b/abs/core-testing/linhes-scripts/scripts/mythwelcome-test-wakeup.sh deleted file mode 100755 index 4aadf6d..0000000 --- a/abs/core-testing/linhes-scripts/scripts/mythwelcome-test-wakeup.sh +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm" #this clears your alarm -sudo sh -c "echo `date '+%s' -d '+ 4 minutes'` > /sys/class/rtc/rtc0/wakealarm" #this writes your alarm -cat /proc/driver/rtc -cat /proc/driver/rtc > /var/log/wake_alarm -echo "Your computer is set to start up in 4 minutes using ACPI." -echo -n "Do you want to shutdown the computer now? (y/n): " -read -n 1 shutdown -if [ "$shutdown" == "y" ]; then - echo -e "\nShutting down now..." - sudo shutdown -t 5 -h now -else - echo -e "\nTo shutdown execute the following:" - echo " sudo shutdown -t 5 -h now" -fi diff --git a/abs/core-testing/linhes-scripts/scripts/pause-mythcommflag.sh b/abs/core-testing/linhes-scripts/scripts/pause-mythcommflag.sh deleted file mode 100755 index 4da808b..0000000 --- a/abs/core-testing/linhes-scripts/scripts/pause-mythcommflag.sh +++ /dev/null @@ -1,53 +0,0 @@ -#!/bin/bash -# pause-mythcommflag.sh v0.2 05/21/09 -# Utility to automatically pause & unpause mythcommflag if CPU usage is above a certain level -# Free for any use. -# Installation: -# cp pause-mythcommflag.sh /usr/LH/bin -# chmod +x /usr/LH/bin/pause-mythcommflag.sh -# Usage: Executed from sv start pause-mythcommflag - -# Threshold for when mythcommflag will be paused -CPUTHRESHOLD=75 - -# Second Threshold for when mythcommflag is already paused -PAUSEDCPUTHRESHOLD=45 - -# Log file to write (change to /dev/null for no log) -LOG=/var/log/mythtv/pause-mythcommflag.log - -# Number of seconds to wait between checking for mythcommflag process -SLEEP=5 - -#sleep $SLEEP - -touch $LOG - -COMMFLAGSTATE=1 - -while true; do - PROCCOMMFLAG=`pidof mythcommflag` - if [ -n "${PROCCOMMFLAG}" ] - then - FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'` - if [ $COMMFLAGSTATE -eq 1 ] - then - CPUTHRESHOLD1=$CPUTHRESHOLD - else - CPUTHRESHOLD1=$PAUSEDCPUTHRESHOLD - fi - if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD1" ] - then -# echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD1%, PAUSE Commflagging" >> $LOG - kill -s STOP $PROCCOMMFLAG - COMMFLAGSTATE=0 - else -# echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD1%, CONTINUE Commflagging" >> $LOG - kill -s CONT $PROCCOMMFLAG - COMMFLAGSTATE=1 - fi -# else -# echo "No COMMFLAG Process Active" >> $LOG - fi - sleep $SLEEP -done diff --git a/abs/core-testing/linhes-scripts/scripts/pause_mythcommflag b/abs/core-testing/linhes-scripts/scripts/pause_mythcommflag deleted file mode 100755 index c20f9b0..0000000 --- a/abs/core-testing/linhes-scripts/scripts/pause_mythcommflag +++ /dev/null @@ -1,8 +0,0 @@ -/var/log/mythtv/pause-mythcommflag.log { - daily - rotate 7 - notifempty - copytruncate - compress - missingok -} diff --git a/abs/core-testing/linhes-scripts/scripts/run-limit-mythcommflag b/abs/core-testing/linhes-scripts/scripts/run-limit-mythcommflag deleted file mode 100755 index 38ca45f..0000000 --- a/abs/core-testing/linhes-scripts/scripts/run-limit-mythcommflag +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -exec /usr/bin/nice -19 /usr/LH/bin/limit-mythcommflag.sh diff --git a/abs/core-testing/linhes-scripts/scripts/run-pause-mythcommflag b/abs/core-testing/linhes-scripts/scripts/run-pause-mythcommflag deleted file mode 100755 index 8bd25ac..0000000 --- a/abs/core-testing/linhes-scripts/scripts/run-pause-mythcommflag +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/sh -exec /usr/bin/nice -19 /usr/LH/bin/pause-mythcommflag.sh diff --git a/abs/core-testing/linhes-scripts/scripts/screenshooter.sh b/abs/core-testing/linhes-scripts/scripts/screenshooter.sh deleted file mode 100755 index 9e35786..0000000 --- a/abs/core-testing/linhes-scripts/scripts/screenshooter.sh +++ /dev/null @@ -1,225 +0,0 @@ -#!/bin/bash - -# Written by Bob Igo from the MythTV Store at http://MythiC.TV -# with contributions from TJC and Sarah Hayes -# Email: bob@stormlogic.com -# -# If you run into problems with this script, please send me email - -# This is alpha code to auto-generate thumbnails for previews in MythVideo. -# It won't currently work on some filenames that have spaces in them. -# It's surely just a matter of escaping or quoting, but I have yet to find -# the right incantation. - -# example usage: -# find -L /myth/video -wholename '*.covers' -prune -o -name '*.resume' -o -type f -exec screenshooter.sh -v {} \; - -# limitations: -# -- -# In an MBE/SBE/FE setup this might get the settings for the wrong machine... -# The script has no AI to know if a grabbed frame is useful to identify the video, only that it was able to grab it. -# Doesn't clean up after itself if videos are deleted, though MythTV may do this on its own. -# Minimum theoretical compatible video length is 4 seconds. Shorter videos will not work with this version. -# Surely more limitations I can't think of because it's my baby :) - -Usage() { - echo "USAGE:" - echo `basename $0` "-v PATHNAME [-s SECONDS] [-c] [-b HOSTNAME] [-u USERNAME] [-p PASSWORD] [-o]" - echo "-v: pathname to Video" - echo "-s: number of Seconds to skip before capturing (270 by default)" - echo "-c: Clobber any previous screenshot found for this video (off by default)" - echo "-b: mysql server (Backend) hostname (localhost by default)" - echo "-u: mysql Username (mythtv by default)" - echo "-p: mysql Password (mythtv by default)" - echo "-o: verbOse mode (off by default)" - echo "-x: check for valid video eXtension (off by default)" - echo - echo "EXAMPLE: $0 -v /myth/video/HDTV/shuttle.mpg -c -s 30" - exit 3 -} - -if [ -z $1 ]; then - Usage -fi - -V_MISSING=1 - -while getopts "v:sbupochx" FLAG ; do - case "$FLAG" in - v) VIDEO_PATHNAME="$OPTARG" - V_MISSING=0;; - s) SKIPAHEAD="$OPTARG";; - c) CLOBBER=1;; - b) BACKEND_HOSTNAME="$OPTARG";; - u) DBUSERNAME="$OPTARG";; - p) DBPASSWORD="$OPTARG";; - o) VERBOSE=1;; - x) EXTENSION_CHECK=1;; - *) Usage;; - esac -done - -if [ $V_MISSING == 1 ]; then - Usage -fi - -# Declaring Variables here and assigning sensible defaults. - -# SKIPAHEAD is the number of seconds to skip ahead before starting the frame capture. -# Set it to an arbitrary value if none is specified. -SKIPAHEAD=${SKIPAHEAD:-"270"} -BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"} -DBUSERNAME=${DBUSERNAME:-"mythtv"} -DBPASSWORD=${DBPASSWORD:-"mythtv"} -# Defaults to quiet. -VERBOSE=${VERBOSE:-0} -# Unless otherwise told, do not clobber existing cover files. -CLOBBER=${CLOBBER:-0} -# Unless otherwise told, do not check the file extension against -# MythTV's list of registered video file types. -EXTENSION_CHECK=${EXTENSION_CHECK:-0} - -VIDEO_CAPTURE_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoArtworkDir' limit 1") -if [ ! -d "$VIDEO_CAPTURE_HOME" ] ; then - echo "Directory $VIDEO_CAPTURE_HOME does not exist, nowhere to put the screen shot!" - echo "Have you configured MythVideo yet?" - exit 1 -fi - -VIDEO_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoStartupDir' limit 1") -if [ ! -d "$VIDEO_HOME" ] ; then - echo "Directory $VIDEO_HOME does not exist, nowhere to put the screen shot!" - echo "Have you configured MythVideo yet?" - exit 1 -fi - -VIDEO_FILENAME=$(basename "$VIDEO_PATHNAME") -VIDEO_EXTENSION=${VIDEO_FILENAME##*.} -# Since we cron'd lets first make sure the validity of the file -if [ "$EXTENSION_CHECK" == "1" ]; then - EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select f_ignore from videotypes where extension=\"$VIDEO_EXTENSION\";") - #excheck returns blank, it found nothing. - if [ "$EXCHECK" == "" ]; then - if [ "$VERBOSE" == "1" ]; then - echo "$VIDEO_EXTENSION does not appear to be a valid media file, skipping." - fi - exit 1 - else - # It is valid, but should we ignore it. If so then excheck will equal 1. - if [ "EXCHECK" == "1" ]; then - if [ "$VERBOSE" == "1" ]; then - echo "$VIDEO_EXTENSION is set to ignore." - fi - exit 1 - fi - # It is valid, it's not set to ignore. - if [ "$VERBOSE" == "1" ]; then - echo "$VIDEO_EXTENSION appears in the Database, checking further." - fi - EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select title from videometadata where filename=\"$VIDEO_PATHNAME\";") - #Right, the file is supposed to be playable. Has it been imported to the Db yet? - if [ "$EXCHECK" == "" ] ; then - if [ "$VERBOSE" == "1" ]; then - echo "$VIDEO_FILENAME does not exist in the database." - fi - exit 1 - # If you decide you want the system to 'auto import' the video then comment out - # the exit line and uncomment the rest of it. Bewarned, this is sucky SQL at - # the best but will give sensible defaults. - # - # if [ "$VERBOSE" == "1" ]; then - # echo "Importing $VIDEO_FILENAME in to database." - # fi - # mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "insert into videometadata (intid, title, director, plot, rating, inetref, year, userrating, length, showlevel, filename, coverfile, childid, browse, playcommand, category) values (' ', '$VIDEO_FILENAME', 'Unknown', 'Unknown', 'NR', '00000000', 1895, 0.0, 0, 1, '$VIDEO_PATHNAME', 'No Cover', -1, 1, ' ', 0);" - fi - fi -fi - -if [ "$CLOBBER" -eq 0 ]; then - # Since we're not clobbering, first check to see if this video already has a coverfile entry in MySQL: - SQL_CMD="select coverfile from videometadata where filename=\"$VIDEO_PATHNAME\";" - CURRENT_COVERFILE=`mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -B -e "$SQL_CMD" | tail -1` - - if [[ "$CURRENT_COVERFILE" != "" ]] && [[ "$CURRENT_COVERFILE" != "No Cover" ]]; then - # there's already a cover file for this video - if [ "$VERBOSE" == "1" ]; then - echo "$VIDEO_FILENAME has cover file, skipping." - fi - exit 2 - fi -fi - - -# Swap the video file extension for png. Should work assuming the extension only appears ONCE! -VIDEO_CAPTURE_PATHNAME="$VIDEO_CAPTURE_HOME/$VIDEO_FILENAME.png" - -# How many frames of video to capture. We'll grab the last frame as our screenshot. -if [ "$VIDEO_EXTENSION" == "m4v" ]; then - FRAMES_TO_CAPTURE="90" - SHOTFILE="000000"$FRAMES_TO_CAPTURE".png" -else - FRAMES_TO_CAPTURE="05" -fi - -SHOTFILE="000000"$FRAMES_TO_CAPTURE".png" -VIDEO_STATS="/tmp/screenshooter_video_stats.txt" - -cd /tmp - -# The video we're processing may be shorter than SKIPAHEAD seconds. -# Keep trying to capture until we find a SKIPAHEAD value within the length of the video. -# Give up if we reach 0 seconds. -while [ ! -f "$SHOTFILE" ]; do - /usr/bin/mplayer -ss $SKIPAHEAD -vf scale=640:-2 -ao null -vo png -quiet -frames $FRAMES_TO_CAPTURE -identify "$VIDEO_PATHNAME" &> $VIDEO_STATS & - TIMEOUT=9 - - # Some video formats will play audio only. This loop gives the above command 20 seconds to - # finish, otherwise it gets killed. - while [ -n "`ps -p $! --no-heading`" ]; do - TIMEOUT=$(expr $TIMEOUT - 1) - if [ "$TIMEOUT" -le 0 ]; then - kill -9 $! - break - fi - sleep 1 - done - - SKIPAHEAD=$(expr $SKIPAHEAD / 2) - if [ "$SKIPAHEAD" -le 0 ]; then - break - fi -done - -if [ -f "$SHOTFILE" ]; then - # Now, the video_capture is taken, and the name of the shot is in $SHOTFILE - # Rename it and move it to the place where video_captures live. - /bin/mv -f "$SHOTFILE" "$VIDEO_CAPTURE_PATHNAME" - /bin/rm -f 000000*png - chown mythtv: "$VIDEO_CAPTURE_PATHNAME" - - # We've got the shotfile nailed, now calculate video run length. - VIDEO_LENGTH_IN_SECONDS=`grep ID_LENGTH $VIDEO_STATS | awk -F'=' '{print $2}'` - VIDEO_LENGTH_IN_INTEGER_SECONDS=${VIDEO_LENGTH_IN_SECONDS/%.*/} - if [ $VIDEO_LENGTH_IN_INTEGER_SECONDS -lt 60 ]; then - VIDEO_LENGTH_IN_MINUTES="1" - else - VIDEO_LENGTH_IN_MINUTES=$(expr $VIDEO_LENGTH_IN_INTEGER_SECONDS / 60) - fi - - SQL_CMD="update videometadata set length=\"$MIN_LENGTH\" where filename=\"$VIDEO_PATHNAME\";" - mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD" - - - # put the screenshot pathname and any runlength info into videometadatatable - - # Pre-escape any single or double quotes for the SQL command. - - VIDEO_CAPTURE_PATHNAME=`echo $VIDEO_CAPTURE_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' ` - VIDEO_PATHNAME=`echo $VIDEO_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' ` - SQL_CMD="update videometadata set coverfile=\"$VIDEO_CAPTURE_PATHNAME\", length=\"$VIDEO_LENGTH_IN_MINUTES\" where filename=\"$VIDEO_PATHNAME\";" - - mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD" -else - echo "No image could be captured from $VIDEO_PATHNAME" - exit 1 -fi diff --git a/abs/core-testing/linhes-scripts/scripts/shootscreens-mythtv.sh b/abs/core-testing/linhes-scripts/scripts/shootscreens-mythtv.sh deleted file mode 100755 index db01147..0000000 --- a/abs/core-testing/linhes-scripts/scripts/shootscreens-mythtv.sh +++ /dev/null @@ -1,11 +0,0 @@ -#! /bin/bash -# available sizes: 34, 25, 24, 20, 18, 17, 14, 12, 11, 10 -export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" -echo "This could take several minutes," > /tmp/screens -echo "depending on your hardware and the" >> /tmp/screens -echo "number and type of videos you have." >> /tmp/screens -echo "It will only work on videos scanned" >> /tmp/screens -echo "with Video Manager." >> /tmp/screens -cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --offset=200 --color=yellow --delay=0 & -shootscreens.sh 1 -/bin/rm -f /tmp/screens \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/scripts/shootscreens.sh b/abs/core-testing/linhes-scripts/scripts/shootscreens.sh deleted file mode 100755 index 7b1260c..0000000 --- a/abs/core-testing/linhes-scripts/scripts/shootscreens.sh +++ /dev/null @@ -1,37 +0,0 @@ -#!/bin/bash - -# Written by Bob Igo from the MythTV Store at http://MythiC.TV -# Email: bob@stormlogic.com -# -# If you run into problems with this script, please send me email - -# This code generates screenshots (cover files) for all videos in -# MythTV's videometadata table that do not have covers associated with them. - -if [ "$1" == "1" ]; then - OSD=1 -else - OSD=0 -fi - -> /tmp/shooter.log -{ - percentage=0 - # Change IFS to be a newline so that filenames with spaces will be handled properly. - IFS=$'\n' - vidcount=`mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | wc -l` - increment=$(expr 100 / $vidcount) - for vid in `mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | grep -v -e "^filename$"` - do - if [ $OSD == 1 ]; then - osd_cat --barmode=percentage --percentage=$percentage --pos=middle --align=center --color=white --text="Generating Video Thumbnails..." --font=$FONT --shadow=3 --color=yellow --delay=0 & - percentage=$(expr $percentage + $increment) - fi - - screenshooter.sh -v $vid - done - if [ $OSD == 1 ]; then - killall -9 osd_cat - osd_cat --barmode=percentage --percentage=100 --pos=middle --align=center --color=white --text="Video Thumbnails Generated!" --font=$FONT --shadow=3 --color=yellow --delay=3 & - fi -} \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/scripts/vdpau-detector b/abs/core-testing/linhes-scripts/scripts/vdpau-detector deleted file mode 100755 index c8cd155..0000000 --- a/abs/core-testing/linhes-scripts/scripts/vdpau-detector +++ /dev/null @@ -1,103 +0,0 @@ -#!/bin/bash - -# This script written by an anonymous author -# Original page http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo -# -# It's modded to allow vdpau switches commands to pass to a modded version of Bob Igo's -# mplayer-resumer.pl wrapper for mplayer -# -# User can customize commandline for mplayer by editing the appropriate sections below -# They include BASIC_OPTS, NOHD_OPTS, and LOW_OPTS - -IAM=$0 -FILE=$1 - -#if no input display usage -if [[ -z "$FILE" ]]; then - echo usage: $0 /path/to/file - exit -fi - -MPLAYER="/usr/bin/mplayer" - -# For a complete list of options, see the mplayer DOCS -# http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html -# - -# Options for all videos: fullscreen, zoom, and use software eq -BASIC_OPTS="-fs -zoom" - -# Options for non-HD videos: force aspect to 16x10 (to ensure video fills TV screen) -# You'll need to modify the ratio if your res differs -# Example: 1920x1080 = 1.778 = 16:9 -# Example: 1680x1050 = 1.600 = 16:10 -# Example: 1280x720 = 1.778 = 16:9 - -NOHD_OPTS="-aspect 16:10" - -# Options for normal and lowres videos: use XV forcing 16x10 -LOW_OPTS="-aspect 16:10 -vo xv" - -VWIDTH=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_WIDTH | cut -c 16-25) -VCODEC=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_CODEC | cut -c 16-25) - -# all following echo commands can be uncommented for debug info -#echo . -#echo " DEBUG info: video codec: $VCODEC" -#echo " DEBUG info: video width: $VWIDTH" -#echo " Debug info: - - -# Test for codec, if it's supported by VDPAU, set options to use it. Then, check if the video is in HD, -# and if it's not, set non-HD options. -case $VCODEC in -ffh264) - #echo -e "Playing h.264 file $FILE:\n" - MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffh264vdpau" - if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" - fi - if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" - fi - ;; -ffmpeg2) - #echo -e "Playing MPEG2 file $FILE:\n" - MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffmpeg12vdpau" - if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" - fi - if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" - fi - ;; -ffwmv3) - #echo -e "Playing WMV3 file $FILE:\n" - MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffwmv3vdpau" - if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" - fi - if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" - fi - ;; -# VC-1 is largely unsupported by nvidia - uncomment this section if you're sure your card supports it. -ffvc1) - #echo -e "Playing VC-1 file $FILE:\n" - MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffvc1vdpau" - if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" - fi - if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then - MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" - fi - ;; -*) - #echo -e "Playing normal file $FILE:\n" - # Use XV and yadif filter with 'normal' (DiVX, XViD, old WMV, etc.) files, and force 16:9 - # -vf filters only seem to work with XV, or at least they don't work w/VDPAU - MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" - ;; -esac - -echo $MPLAYEROPTS diff --git a/abs/core-testing/linhes-scripts/shootscreens-mythtv.sh b/abs/core-testing/linhes-scripts/shootscreens-mythtv.sh new file mode 100755 index 0000000..db01147 --- /dev/null +++ b/abs/core-testing/linhes-scripts/shootscreens-mythtv.sh @@ -0,0 +1,11 @@ +#! /bin/bash +# available sizes: 34, 25, 24, 20, 18, 17, 14, 12, 11, 10 +export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*" +echo "This could take several minutes," > /tmp/screens +echo "depending on your hardware and the" >> /tmp/screens +echo "number and type of videos you have." >> /tmp/screens +echo "It will only work on videos scanned" >> /tmp/screens +echo "with Video Manager." >> /tmp/screens +cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --offset=200 --color=yellow --delay=0 & +shootscreens.sh 1 +/bin/rm -f /tmp/screens \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/shootscreens.sh b/abs/core-testing/linhes-scripts/shootscreens.sh new file mode 100755 index 0000000..7b1260c --- /dev/null +++ b/abs/core-testing/linhes-scripts/shootscreens.sh @@ -0,0 +1,37 @@ +#!/bin/bash + +# Written by Bob Igo from the MythTV Store at http://MythiC.TV +# Email: bob@stormlogic.com +# +# If you run into problems with this script, please send me email + +# This code generates screenshots (cover files) for all videos in +# MythTV's videometadata table that do not have covers associated with them. + +if [ "$1" == "1" ]; then + OSD=1 +else + OSD=0 +fi + +> /tmp/shooter.log +{ + percentage=0 + # Change IFS to be a newline so that filenames with spaces will be handled properly. + IFS=$'\n' + vidcount=`mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | wc -l` + increment=$(expr 100 / $vidcount) + for vid in `mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | grep -v -e "^filename$"` + do + if [ $OSD == 1 ]; then + osd_cat --barmode=percentage --percentage=$percentage --pos=middle --align=center --color=white --text="Generating Video Thumbnails..." --font=$FONT --shadow=3 --color=yellow --delay=0 & + percentage=$(expr $percentage + $increment) + fi + + screenshooter.sh -v $vid + done + if [ $OSD == 1 ]; then + killall -9 osd_cat + osd_cat --barmode=percentage --percentage=100 --pos=middle --align=center --color=white --text="Video Thumbnails Generated!" --font=$FONT --shadow=3 --color=yellow --delay=3 & + fi +} \ No newline at end of file diff --git a/abs/core-testing/linhes-scripts/vdpau-detector b/abs/core-testing/linhes-scripts/vdpau-detector new file mode 100755 index 0000000..c8cd155 --- /dev/null +++ b/abs/core-testing/linhes-scripts/vdpau-detector @@ -0,0 +1,103 @@ +#!/bin/bash + +# This script written by an anonymous author +# Original page http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo +# +# It's modded to allow vdpau switches commands to pass to a modded version of Bob Igo's +# mplayer-resumer.pl wrapper for mplayer +# +# User can customize commandline for mplayer by editing the appropriate sections below +# They include BASIC_OPTS, NOHD_OPTS, and LOW_OPTS + +IAM=$0 +FILE=$1 + +#if no input display usage +if [[ -z "$FILE" ]]; then + echo usage: $0 /path/to/file + exit +fi + +MPLAYER="/usr/bin/mplayer" + +# For a complete list of options, see the mplayer DOCS +# http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html +# + +# Options for all videos: fullscreen, zoom, and use software eq +BASIC_OPTS="-fs -zoom" + +# Options for non-HD videos: force aspect to 16x10 (to ensure video fills TV screen) +# You'll need to modify the ratio if your res differs +# Example: 1920x1080 = 1.778 = 16:9 +# Example: 1680x1050 = 1.600 = 16:10 +# Example: 1280x720 = 1.778 = 16:9 + +NOHD_OPTS="-aspect 16:10" + +# Options for normal and lowres videos: use XV forcing 16x10 +LOW_OPTS="-aspect 16:10 -vo xv" + +VWIDTH=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_WIDTH | cut -c 16-25) +VCODEC=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_CODEC | cut -c 16-25) + +# all following echo commands can be uncommented for debug info +#echo . +#echo " DEBUG info: video codec: $VCODEC" +#echo " DEBUG info: video width: $VWIDTH" +#echo " Debug info: + + +# Test for codec, if it's supported by VDPAU, set options to use it. Then, check if the video is in HD, +# and if it's not, set non-HD options. +case $VCODEC in +ffh264) + #echo -e "Playing h.264 file $FILE:\n" + MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffh264vdpau" + if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" + fi + if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" + fi + ;; +ffmpeg2) + #echo -e "Playing MPEG2 file $FILE:\n" + MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffmpeg12vdpau" + if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" + fi + if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" + fi + ;; +ffwmv3) + #echo -e "Playing WMV3 file $FILE:\n" + MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffwmv3vdpau" + if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" + fi + if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" + fi + ;; +# VC-1 is largely unsupported by nvidia - uncomment this section if you're sure your card supports it. +ffvc1) + #echo -e "Playing VC-1 file $FILE:\n" + MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffvc1vdpau" + if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS" + fi + if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then + MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" + fi + ;; +*) + #echo -e "Playing normal file $FILE:\n" + # Use XV and yadif filter with 'normal' (DiVX, XViD, old WMV, etc.) files, and force 16:9 + # -vf filters only seem to work with XV, or at least they don't work w/VDPAU + MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS" + ;; +esac + +echo $MPLAYEROPTS -- cgit v0.12