From 9c70dc6da069779c71156676e51aab607d455d9f Mon Sep 17 00:00:00 2001
From: Unconfigured <Unconfigured>
Date: Mon, 8 Jun 2009 22:45:45 +0000
Subject: live-installer is no longer used

---
 abs/core/live-installer/LinHES-release             |    1 -
 abs/core/live-installer/MythVantage.sh             |    3 -
 abs/core/live-installer/PKGBUILD                   |   66 -
 abs/core/live-installer/add_service.sh             |   15 -
 abs/core/live-installer/autocard.py                |  302 -----
 abs/core/live-installer/bpopup-ui.xml              |  164 ---
 abs/core/live-installer/build_diskless.sh          |  143 ---
 abs/core/live-installer/copy-to-mythbase.sh        |   12 -
 abs/core/live-installer/create_master.sh           |   57 -
 abs/core/live-installer/file_time_offset.py        |   39 -
 abs/core/live-installer/install-ui.xml             |  175 ---
 abs/core/live-installer/install_db_chroot.sh       |   52 -
 abs/core/live-installer/install_functions.sh       |  484 --------
 abs/core/live-installer/install_proxy.sh           |  481 --------
 abs/core/live-installer/issue                      |    1 -
 abs/core/live-installer/live-install.sh            |   28 -
 abs/core/live-installer/live.install               |   78 --
 abs/core/live-installer/networkconfig.sh           |  280 -----
 abs/core/live-installer/remove_service.sh          |    8 -
 .../live-installer/restore_default_settings.sh     |  325 -----
 abs/core/live-installer/soundconfig.sh             |  248 ----
 abs/core/live-installer/startx                     |   29 -
 abs/core/live-installer/systemconfig.sh            | 1255 --------------------
 .../templates/LCD/Shuttle-SG33/LCDd.conf           |  869 --------------
 .../templates/LCD/Silverstone/LCDd.conf            |  869 --------------
 .../templates/LCD/Silverstone/modules              |    1 -
 .../templates/LCD/antec_fusion/LCDd.conf           |  869 --------------
 .../templates/LCD/antec_fusion/lircd.conf          |   38 -
 .../templates/LCD/antec_fusion/lircrc              |   15 -
 .../templates/LCD/antec_fusion/modules             |    1 -
 .../live-installer/templates/LCD/xosd/LCDd.conf    |  957 ---------------
 abs/core/live-installer/templates/cc.orig.sh       |   35 -
 abs/core/live-installer/templates/cc.sh            |    5 -
 abs/core/live-installer/templates/cc_vol.sh        |    5 -
 abs/core/live-installer/templates/change_chan.sh   |   19 -
 abs/core/live-installer/templates/cron.template    |    4 -
 .../templates/etcnet/eth/ipv4address               |    2 -
 .../live-installer/templates/etcnet/eth/ipv4route  |    2 -
 .../live-installer/templates/etcnet/eth/iwconfig   |    2 -
 .../live-installer/templates/etcnet/eth/options    |    7 -
 .../templates/evrouter/MythVantage-4               |    0
 .../templates/evrouter/MythVantage-8               |    0
 .../templates/evrouter/MythVantage-Full            |    0
 .../templates/evrouter/MythVantage8-minipac        |    3 -
 .../templates/evrouter/MythVantage8-uhid           |    3 -
 abs/core/live-installer/templates/exports.template |    8 -
 .../live-installer/templates/fstab.conf.template   |   16 -
 abs/core/live-installer/templates/mysql.service    |   13 -
 abs/core/live-installer/templates/mysql.txt        |   29 -
 .../live-installer/templates/ncid.conf.template    |   51 -
 .../live-installer/templates/ncidd.conf.template   |  143 ---
 .../live-installer/templates/real_change_chan.sh   |   19 -
 .../templates/remotes/ATI_wonder/lircd.ATI.conf    |  357 ------
 .../remotes/ATI_wonder/lircrc-atiwonder.txt        |  922 --------------
 .../templates/remotes/ATI_wonder/preview.jpg       |  Bin 63480 -> 0 bytes
 .../remotes/MX-500-jams/lircd.conf.MX-500-JAMS     |  115 --
 .../templates/remotes/MX-500-jams/lircrc           |  832 -------------
 .../templates/remotes/MX-500-jams/preview.jpg      |  Bin 10473 -> 0 bytes
 .../templates/remotes/MythVantage-one/lircd.conf   |  115 --
 .../templates/remotes/MythVantage-one/lircrc       |  857 -------------
 .../templates/remotes/MythVantage-one/preview.jpg  |  Bin 88727 -> 0 bytes
 .../RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf  |   87 --
 .../RadioShack_15-2116-Jarod_Wilson/lircrc-rs      |  539 ---------
 .../RadioShack_15-2116-Jarod_Wilson/preview.jpg    |  Bin 7504 -> 0 bytes
 .../templates/remotes/gr8zap/lircd.conf.streamzap  |   69 --
 .../live-installer/templates/remotes/gr8zap/lircrc |  472 --------
 .../templates/remotes/gr8zap/preview.jpg           |  Bin 83195 -> 0 bytes
 .../remotes/hauppauge/lircd.conf.hauppauge         |  274 -----
 .../remotes/hauppauge/lircmd.conf.hauppauge        |   33 -
 .../templates/remotes/hauppauge/preview.jpg        |  Bin 45763 -> 0 bytes
 .../templates/remotes/imon-pad/lircd.conf          |   88 --
 .../templates/remotes/imon-pad/lircrc              |  240 ----
 .../templates/remotes/imon-pad/preview.jpg         |  Bin 33321 -> 0 bytes
 .../templates/remotes/mceusb/lircd-mceusb.conf     |   88 --
 .../templates/remotes/mceusb/lircrc-mceusb         |  393 ------
 .../templates/remotes/mceusb/preview.jpg           |  Bin 12551 -> 0 bytes
 .../templates/remotes/no_remote/preview.jpg        |  Bin 3087 -> 0 bytes
 .../templates/remotes/receiver_usb.id              |    4 -
 .../remotes/snapstream_firefly/lircd.snapstrm.conf |  127 --
 .../remotes/snapstream_firefly/lircrc-snapstrm.txt |  590 ---------
 .../remotes/snapstream_firefly/preview.jpg         |  Bin 63750 -> 0 bytes
 .../remotes/streamzap/lircd.conf.streamzap         |   69 --
 .../templates/remotes/streamzap/lircrc             |  832 -------------
 .../templates/remotes/streamzap/preview.jpg        |  Bin 83195 -> 0 bytes
 .../live-installer/templates/samba/smb.conf.home   |   10 -
 .../live-installer/templates/samba/smb.conf.media  |   10 -
 .../templates/samba/smb.conf.template              |  125 --
 .../templates/settings/default_1/keybindings.txt   |  209 ----
 .../templates/settings/default_1/settings.txt      |  320 -----
 .../templates/settings/default_2/keybindings.txt   |  209 ----
 .../templates/settings/default_2/settings.txt      |  320 -----
 abs/core/live-installer/templates/sources/mv-core  |    2 -
 .../templates/sources/mv-core-testing              |    2 -
 abs/core/live-installer/templates/sources/mv-extra |    2 -
 .../templates/sources/mv-extra-testing             |    2 -
 abs/core/live-installer/templates/sources/svc_pkg  |    3 -
 .../transmit/Time_Warner_SA3250/lircd.conf         |  413 -------
 .../live-installer/templates/xine.config.template  |  754 ------------
 .../live-installer/templates/xorg/modeline.ATSC    |   33 -
 .../live-installer/templates/xorg/modeline.DVD     |    9 -
 .../live-installer/templates/xorg/modeline.NTSC    |   10 -
 .../live-installer/templates/xorg/modeline.VESA    |  163 ---
 .../live-installer/templates/xorg/modeline.custom  |    1 -
 .../live-installer/templates/xorg/xorg.conf.ati    |   94 --
 .../live-installer/templates/xorg/xorg.conf.intel  |  148 ---
 .../live-installer/templates/xorg/xorg.conf.nvidia |   90 --
 .../live-installer/templates/xorg/xorg.conf.via    |   77 --
 .../live-installer/templates/xorg/xorg.conf.vmware |   72 --
 abs/core/live-installer/timezip.py                 |  185 ---
 abs/core/live-installer/xconfig.sh                 |  233 ----
 110 files changed, 18830 deletions(-)
 delete mode 100644 abs/core/live-installer/LinHES-release
 delete mode 100755 abs/core/live-installer/MythVantage.sh
 delete mode 100755 abs/core/live-installer/PKGBUILD
 delete mode 100755 abs/core/live-installer/add_service.sh
 delete mode 100755 abs/core/live-installer/autocard.py
 delete mode 100755 abs/core/live-installer/bpopup-ui.xml
 delete mode 100755 abs/core/live-installer/build_diskless.sh
 delete mode 100755 abs/core/live-installer/copy-to-mythbase.sh
 delete mode 100755 abs/core/live-installer/create_master.sh
 delete mode 100755 abs/core/live-installer/file_time_offset.py
 delete mode 100755 abs/core/live-installer/install-ui.xml
 delete mode 100755 abs/core/live-installer/install_db_chroot.sh
 delete mode 100755 abs/core/live-installer/install_functions.sh
 delete mode 100755 abs/core/live-installer/install_proxy.sh
 delete mode 100644 abs/core/live-installer/issue
 delete mode 100755 abs/core/live-installer/live-install.sh
 delete mode 100644 abs/core/live-installer/live.install
 delete mode 100644 abs/core/live-installer/networkconfig.sh
 delete mode 100755 abs/core/live-installer/remove_service.sh
 delete mode 100755 abs/core/live-installer/restore_default_settings.sh
 delete mode 100755 abs/core/live-installer/soundconfig.sh
 delete mode 100755 abs/core/live-installer/startx
 delete mode 100755 abs/core/live-installer/systemconfig.sh
 delete mode 100644 abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
 delete mode 100644 abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf
 delete mode 100644 abs/core/live-installer/templates/LCD/Silverstone/modules
 delete mode 100644 abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf
 delete mode 100644 abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf
 delete mode 100644 abs/core/live-installer/templates/LCD/antec_fusion/lircrc
 delete mode 100644 abs/core/live-installer/templates/LCD/antec_fusion/modules
 delete mode 100644 abs/core/live-installer/templates/LCD/xosd/LCDd.conf
 delete mode 100755 abs/core/live-installer/templates/cc.orig.sh
 delete mode 100755 abs/core/live-installer/templates/cc.sh
 delete mode 100755 abs/core/live-installer/templates/cc_vol.sh
 delete mode 100755 abs/core/live-installer/templates/change_chan.sh
 delete mode 100644 abs/core/live-installer/templates/cron.template
 delete mode 100644 abs/core/live-installer/templates/etcnet/eth/ipv4address
 delete mode 100644 abs/core/live-installer/templates/etcnet/eth/ipv4route
 delete mode 100644 abs/core/live-installer/templates/etcnet/eth/iwconfig
 delete mode 100644 abs/core/live-installer/templates/etcnet/eth/options
 delete mode 100644 abs/core/live-installer/templates/evrouter/MythVantage-4
 delete mode 100644 abs/core/live-installer/templates/evrouter/MythVantage-8
 delete mode 100644 abs/core/live-installer/templates/evrouter/MythVantage-Full
 delete mode 100644 abs/core/live-installer/templates/evrouter/MythVantage8-minipac
 delete mode 100644 abs/core/live-installer/templates/evrouter/MythVantage8-uhid
 delete mode 100644 abs/core/live-installer/templates/exports.template
 delete mode 100755 abs/core/live-installer/templates/fstab.conf.template
 delete mode 100644 abs/core/live-installer/templates/mysql.service
 delete mode 100755 abs/core/live-installer/templates/mysql.txt
 delete mode 100755 abs/core/live-installer/templates/ncid.conf.template
 delete mode 100644 abs/core/live-installer/templates/ncidd.conf.template
 delete mode 100755 abs/core/live-installer/templates/real_change_chan.sh
 delete mode 100644 abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
 delete mode 100644 abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
 delete mode 100644 abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
 delete mode 100644 abs/core/live-installer/templates/remotes/MX-500-jams/lircrc
 delete mode 100644 abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf
 delete mode 100755 abs/core/live-installer/templates/remotes/MythVantage-one/lircrc
 delete mode 100644 abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
 delete mode 100644 abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
 delete mode 100644 abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
 delete mode 100644 abs/core/live-installer/templates/remotes/gr8zap/lircrc
 delete mode 100644 abs/core/live-installer/templates/remotes/gr8zap/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
 delete mode 100644 abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
 delete mode 100644 abs/core/live-installer/templates/remotes/hauppauge/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/imon-pad/lircd.conf
 delete mode 100644 abs/core/live-installer/templates/remotes/imon-pad/lircrc
 delete mode 100644 abs/core/live-installer/templates/remotes/imon-pad/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
 delete mode 100644 abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb
 delete mode 100644 abs/core/live-installer/templates/remotes/mceusb/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/no_remote/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/receiver_usb.id
 delete mode 100644 abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
 delete mode 100644 abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
 delete mode 100644 abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg
 delete mode 100644 abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
 delete mode 100755 abs/core/live-installer/templates/remotes/streamzap/lircrc
 delete mode 100644 abs/core/live-installer/templates/remotes/streamzap/preview.jpg
 delete mode 100755 abs/core/live-installer/templates/samba/smb.conf.home
 delete mode 100755 abs/core/live-installer/templates/samba/smb.conf.media
 delete mode 100644 abs/core/live-installer/templates/samba/smb.conf.template
 delete mode 100644 abs/core/live-installer/templates/settings/default_1/keybindings.txt
 delete mode 100644 abs/core/live-installer/templates/settings/default_1/settings.txt
 delete mode 100644 abs/core/live-installer/templates/settings/default_2/keybindings.txt
 delete mode 100644 abs/core/live-installer/templates/settings/default_2/settings.txt
 delete mode 100644 abs/core/live-installer/templates/sources/mv-core
 delete mode 100644 abs/core/live-installer/templates/sources/mv-core-testing
 delete mode 100644 abs/core/live-installer/templates/sources/mv-extra
 delete mode 100644 abs/core/live-installer/templates/sources/mv-extra-testing
 delete mode 100644 abs/core/live-installer/templates/sources/svc_pkg
 delete mode 100755 abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
 delete mode 100644 abs/core/live-installer/templates/xine.config.template
 delete mode 100644 abs/core/live-installer/templates/xorg/modeline.ATSC
 delete mode 100644 abs/core/live-installer/templates/xorg/modeline.DVD
 delete mode 100644 abs/core/live-installer/templates/xorg/modeline.NTSC
 delete mode 100644 abs/core/live-installer/templates/xorg/modeline.VESA
 delete mode 100644 abs/core/live-installer/templates/xorg/modeline.custom
 delete mode 100644 abs/core/live-installer/templates/xorg/xorg.conf.ati
 delete mode 100644 abs/core/live-installer/templates/xorg/xorg.conf.intel
 delete mode 100755 abs/core/live-installer/templates/xorg/xorg.conf.nvidia
 delete mode 100644 abs/core/live-installer/templates/xorg/xorg.conf.via
 delete mode 100755 abs/core/live-installer/templates/xorg/xorg.conf.vmware
 delete mode 100755 abs/core/live-installer/timezip.py
 delete mode 100755 abs/core/live-installer/xconfig.sh

diff --git a/abs/core/live-installer/LinHES-release b/abs/core/live-installer/LinHES-release
deleted file mode 100644
index a4de764..0000000
--- a/abs/core/live-installer/LinHES-release
+++ /dev/null
@@ -1 +0,0 @@
-LinHES R6.00.02
diff --git a/abs/core/live-installer/MythVantage.sh b/abs/core/live-installer/MythVantage.sh
deleted file mode 100755
index 286c908..0000000
--- a/abs/core/live-installer/MythVantage.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-export MV_ROOT=/usr/MythVantage
-export PATH=$PATH:$MV_ROOT/bin
-export TEMPLATES=$MV_ROOT/templates
diff --git a/abs/core/live-installer/PKGBUILD b/abs/core/live-installer/PKGBUILD
deleted file mode 100755
index e93031d..0000000
--- a/abs/core/live-installer/PKGBUILD
+++ /dev/null
@@ -1,66 +0,0 @@
-pkgname=live-installer
-pkgver=1.0
-pkgrel=27
-pkgdesc="Install and configure your system"
-#depends=(bc mysql-python expect curl dnsutils)
-depends=(bc libstatgrab  mysql-python expect curl dnsutils parted sg3_utils)
-arch=('i686')
-#source=(mythinstall.bin install-ui.xml  bpopup-ui.xml  mythbeselect.bin install_proxy.sh install_functions.sh startx systemconfig.sh install_db_chroot.sh restore_default_settings.sh live-install.sh xconfig.sh timezip.py soundconfig.sh mythvantage-release issue autocard.py MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh )
-
-
-source=(mythinstall.bin  file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh )
-
-
-install=live.install
-build() {
-
-
-    mkdir -p $startdir/pkg/etc
-    mkdir -p $startdir/pkg/usr/share/mythtv/themes/default
-
-# new stuff
-    MVDIR=$startdir/pkg/usr/MythVantage
-    mkdir  $startdir/pkg/etc/profile.d
-    install -m 0755 MythVantage.sh  $startdir/pkg/etc/profile.d/MythVantage.sh
-    mkdir -p $MVDIR/bin
-    mkdir -p $MVDIR/templates
-    mkdir -p $MVDIR/etc
-
-#copy in all the installer specific stuff
-    #cp -rp ../templates $MVDIR/
-    rsync -r --exclude=.svn ../templates $MVDIR/
-    install -m 0755 install_proxy.sh  $MVDIR/bin/install_proxy.sh
-    install -m 0755 install_functions.sh  $MVDIR/bin/install_functions.sh
-    install -m 0755 systemconfig.sh  $MVDIR/bin/systemconfig.sh
-    install -m 0755 xconfig.sh  $MVDIR/bin/xconfig.sh
-#    install -m 0755 live-install.sh $MVDIR/bin/live-install.sh
-    install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh
-    install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh
-    install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh
-    install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh
-    install -m 0755 create_master.sh $MVDIR/bin/create_master.sh
-    install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh
-    install -m 0755 timezip.py $MVDIR/bin/timezip.py
-    mkdir -p $startdir/pkg/usr/bin
-    install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py
-    #copy in the branding stuff
-    install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release
-     install -m 0755 issue $startdir/pkg/etc/issue
-
-# copy over the ui files
-    install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/
-#    install -m 0755 bpopup-ui.xml $startdir/pkg/usr/local/share/mythtv/themes/default/
-
-#copy in the binaries
-    #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage
-    install  -m 4755 mythinstall.bin $MVDIR/bin/MythVantage
-    cd $MVDIR/bin
-    ln -s MythVantage mythvantage
-    ln -s MythVantage mythinstall
-    cd -
-#    install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect
-
-#    install -m 0755 startx $startdir/pkg/root/startx
-#    install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh
-}
-
diff --git a/abs/core/live-installer/add_service.sh b/abs/core/live-installer/add_service.sh
deleted file mode 100755
index 190d604..0000000
--- a/abs/core/live-installer/add_service.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-SERVICE_DIR=/var/service
-SCRIPT_DIR=/etc/sv
-if [ -d $SCRIPT_DIR/$1 ]
-then
-        if [  -d $SERVICE_DIR/$1 ]
-        then
-                echo "$1 already there"
-        else
-               ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1
-              echo "adding $1"
-	fi
-else
-	echo "couldn't find $SCRIPT_DIR/$1"
-fi
diff --git a/abs/core/live-installer/autocard.py b/abs/core/live-installer/autocard.py
deleted file mode 100755
index b59b8d6..0000000
--- a/abs/core/live-installer/autocard.py
+++ /dev/null
@@ -1,302 +0,0 @@
-#!/usr/bin/python
-# import MySQL module
-#jm
-import MySQLdb
-import sys
-import getopt
-import socket
-import os
-import time
-import string
-import glob
-from string import letters
-from string import digits
-
-def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor):
-    global currenthostname
-    print Device
-    print Driver,
-    print Cardvendor
-    cursor = db.cursor()
-    insert = "false"
-    if Driver == "ivtv" :
-        cardtype="MPEG"
-        defaultinput="Tuner 1"
-        insert="true"
-    if Cardvendor ==  "pcHDTV HD3000 HDTV":
-        insert="false"
-        cardtype ="whocares"
-
-        #print insert
-    if insert == "true" :
-        cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname))
-
-def INSERTHDR_INTOMYTH(deviceid,tuner_number):
-    cardtype='HDHOMERUN'
-    defaultinput='MPEG2TS'
-    global currenthostname
-    print deviceid
-    print cardtype
-    print defaultinput
-    print tuner_number
-    cursor = db.cursor()
-   #print insert
-    cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname))
-
-def INSERTAUTOCARD():
-    global cardlist
-    global currenthostname
-    # create a cursor
-    cursor = db.cursor()
-
-
-    for i in range( 1 , len(cardlist)):
-        insert = "false"
-#        print cardlist[i]
-        Device=cardlist[i][0]
-        Driver=cardlist[i][1]
-        Cardvendor=cardlist[i][2]
-        Businfo=cardlist[i][3]
-        if Driver == "ivtv" :
-            insert="true"
-            devicestatus="unused"
-        if Cardvendor ==  "pcHDTV HD3000 HDTV":
-            insert="false"
-            cardtype ="whocares"
-        if Driver == "hdr":
-            insert="true"
-            devicestatus="unused"
-
-        if insert == "true" :
-            cursor.execute("delete from autocard where uniqid=%s;",(Businfo))
-            if Driver=="hdr":
-                Cardvendor="HDHOMERUN Tuner 1"
-                cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
-                Cardvendor="HDHOMERUN Tuner 2"
-                cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
-
-            else:
-                cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
-
-
-
-def PRINTINFO():
-    global cardlist
-
-    for list in cardlist:
-        if  list != "_placeholder_":
-            print list
-            #print "-------------"
-
-def GATHER_HDR():
-    global cardlist
-    command="/usr/bin/hdhomerun_config --discover"
-    results=os.popen(command,'r')
-    line=results.readline()
-    if line.strip().split()[0] == "no":
-        print "HDHOMERUN not detected"
-    else:
-        print line
-        hdrdevice=line.strip().split()[2]
-        print hdrdevice
-        Driver="hdr"
-        Device=hdrdevice
-        Cardtype="HDHOMERUN"
-        Businfo=hdrdevice
-        cardprops =  [Device,Driver , Cardtype , Businfo]
-        cardlist.append(cardprops)
-
-
-def GATHER_v4l_CARDS():
-    global cardlist
-    cardlist=["_placeholder_"]
-   # print "Looking for v4l cards"
-    try:
-        filelist = os.listdir('/dev/v4l/')
-    except OSError:
-        filelist=" "
-        #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0']
-        #cardlist.append(fakelist)
-    try:
-        filelist = glob.glob("/dev/v4l/video?")
-        Driver=""
-        Cardtype=""
-        Businfo=""
-        numcards  = 0
-        for Device in filelist:
-            #print card
-            numcards = numcards+1
-            cmd = 'v4l2-ctl -D -d' + Device
-            for line in os.popen(cmd).readlines():
-                #print line
-                pos = string.find(line,"Driver name")
-                if pos >=0:
-                    splitline= line.split(':')
-                    Driver=splitline[1].strip()
-                pos = string.find(line,"Card type")
-                if pos >=0:
-                    splitline= line.split(':')
-                    Cardtype=splitline[1].strip()
-
-                pos = string.find(line,"Bus info")
-                if pos >=0:
-                    splitline= line.split(':',1)
-                    Businfo=splitline[1].strip()
-
-            #print Device,Driver , Cardtype , Businfo,numcards
-            cardprops =  [Device,Driver , Cardtype , Businfo]
-            cardlist.append(cardprops)
-    except IOError:
-        print "no v4l cards found"
-        sys.exit(2)
-
-
-def WRITEUDEV_IVTV():
-    global insertmyth
-    cursor = db.cursor()
-    #add ivtv,cid lookup loop through until empty.
-    cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'")
-    cidrows = cursor.fetchall()
-    for row in cidrows:
-        cid=row[0]
-        cursor.execute("select dev,driver,description,devicestatus,hostname from  autocard where uniqid=%s limit 1;",(cid))
-        result = cursor.fetchone()
-        description=result[2]
-        driver='DRIVERS==\"ivtv\"'
-        ATTRNAME='ATTR{name}=="ivtv? encoder MPG"'
-        KERNELS='KERNELS==\"'
-        KERNELS+=cid
-        KERNELS+="\""
-        #filter out non digit or chars
-        keep=letters.join(digits)
-        description=filter(lambda c: c in keep, description)
-        devnode="ivtv/"
-        #devnode+=description + "_"
-        udevcid=cid.partition(":")
-        devnode+=udevcid[2]
-        devnode+="_video"
-        UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"'
-        print "Here is the udev rule"
-        print UDEV_RULE
-        filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules'
-        file = open(filename,'w')
-        file.write(UDEV_RULE)
-        if ( insertmyth == "true"):
-            devnode="/dev/"+devnode
-            INSERTCARD_INTOMYTH(devnode,"ivtv",description)
-            cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid))
-#now insert HDR
-    cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'")
-    cidrows = cursor.fetchall()
-    for row in cidrows:
-              if ( insertmyth == "true"):
-                  deviceid=row[0]
-                  #cardtype="HDHOMRUN"
-                  #defaultinput="MPEG2TS"
-                  dbox2_port=row[1]
-                  tuner_number=dbox2_port.rpartition(' ')[2]
-                  INSERTHDR_INTOMYTH(deviceid,tuner_number)
-                  cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port))
-
-
-
-def CLEARAUTOCARD():
-    cursor = db.cursor()
-    cursor.execute("delete from autocard")
-
-def RELOADUDEV():
-        print "relaoding udev rules"
-        os.system('udevcontrol reload_rules')
-        os.system('rmmod ivtv')
-        os.system('udevtrigger')
-
-
-def usage():
-    print " -h   help"
-    print " -g   gather and print out the found cards"
-    print " -w   write out the udev rules"
-    print " -i   insert cards into myth that are marked will-add(only used with -w)"
-    print " -r   reload udev rules"
-    print " -c   clear the autocard db"
-
-def main(argv):
-    global db
-    global cardlist
-    global currenthostname
-    currenthostname=""
-    writeudev="false"
-    global insertmyth
-    insertmyth ="false"
-
-    db = MySQLdb.connect(host="localhost", user="mythtv", passwd="[REDACTED] db="mythconverg")
-    try:
-        cursor = db.cursor()
-        cursor.execute("describe autocard;")
-    except  MySQLdb.Error, e:
-        cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));")
-        print "table created"
-
-    if ( currenthostname == "" ):
-         currenthostname = socket.gethostname()
-
-
-    try:
-        opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards",  "writeudev" ,"insert" , "reloadudev" , "clearautocard"] )
-    except getopt.GetoptError:
-        sys.exit(2)
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-             usage()
-             sys.exit()
-        elif opt in ( "-g" , "--gathercards"):
-             GATHER_v4l_CARDS()
-             GATHER_HDR()
-             INSERTAUTOCARD()
-             PRINTINFO()
-        elif opt in ("-w", "--writeudev"):
-             writeudev="true"
-        elif opt in ("-i", "--insert"):
-             insertmyth="true"
-        elif opt in ( "-r" , "--reloadudev"):
-             RELOADUDEV()
-        elif opt in ( "-c" , "--clearautocard"):
-             CLEARAUTOCARD()
-
-
-    if ( writeudev == "true"):
-        WRITEUDEV_IVTV()
-
-
-
-
-
-
-if __name__ == "__main__":
-    main(sys.argv[1:])
-
-
-
-
-
-#mysql>  create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));
-#Query OK, 0 rows affected (0.14 sec)
-
-#mysql> describe autocard;
-#+--------------+-------------+------+-----+---------+-------+
-#| Field        | Type        | Null | Key | Default | Extra |
-#+--------------+-------------+------+-----+---------+-------+
-#| dev          | varchar(50) | YES  |     | NULL    |       |
-#| driver       | varchar(50) | YES  |     | NULL    |       |
-#| description  | varchar(50) | YES  |     | NULL    |       |
-#| uniqid       | varchar(50) | YES  |     | NULL    |       |
-#| devicestatus | varchar(50) | YES  |     | NULL    |       |
-#| hostname     | varchar(50) | YES  |     | NULL    |       |
-#+--------------+-------------+------+-----+---------+-------+
-
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/bpopup-ui.xml b/abs/core/live-installer/bpopup-ui.xml
deleted file mode 100755
index df0598b..0000000
--- a/abs/core/live-installer/bpopup-ui.xml
+++ /dev/null
@@ -1,164 +0,0 @@
-<!--
-
-    This is a myth style theme file for mythwelcome
-
-    (c) 2005 by a whole bunch of people associated with MythTV
-
--->
-<mythuitheme>
- 
-    <window name="welcome_screen">
-    
-        <!--
-
-            First, define all the fonts we need on this screen
-
-        -->
-       <font name="title" face="Arial">
-           <color>#ffff00</color>
-           <dropcolor>#000000</dropcolor>
-           <size>24</size>
-           <shadow>3,3</shadow>
-           <bold>yes</bold>
-       </font>
-
-       <font name="time" face="Arial">
-            <color>#9999cc</color>
-            <size>18</size>
-            <bold>yes</bold>
-       </font>
-
-       <font name="label" face="Arial">
-            <color>#ffff00</color>
-            <dropcolor>#000000</dropcolor>
-            <size>18</size>
-            <shadow>3,3</shadow>
-            <bold>yes</bold>
-       </font>
-
-       <font name="info" face="Arial">
-            <color>#ffffff</color>
-            <size>18</size>
-            <bold>yes</bold>
-       </font>
-       
-       <font name="biginfo" face="Arial">
-	       <color>#ffffff</color>
-	       <size>50</size>
-	       <bold>yes</bold>
-       </font>
-       <font name="warning" face="Arial">
-            <color>#ff0000</color>
-            <dropcolor>#000000</dropcolor>
-            <size>16</size>
-            <shadow>2,2</shadow>
-            <bold>yes</bold>
-       </font>
-
-       <font name="buttons" face="Arial">
-            <color>#ffff00</color>
-            <size>14</size>
-            <bold>yes</bold>
-       </font>
-
-       <container name="main_display">
-            <area>0,0,800,600</area>
-
-            <textarea name="title" draworder="0" align="center">
-                <multiline>no</multiline>
-                <font>title</font>
-                <area>50,40,700,40</area>
-                <value></value>
-            </textarea>
-
-            <!-- 
-                time
-            -->            
-            <textarea name="time_text" draworder="0" align="right">
-                <multiline>no</multiline>
-                <font>time</font>
-                <area>660,520,110,30</area>
-                <value></value>
-            </textarea>
-
-            <textarea name="date_text" draworder="0" align="center">
-                <multiline>no</multiline>
-                <font>time</font>
-                <area>0,60,800,70</area>
-                <value></value>
-            </textarea>
-            
-            <!-- 
-                current myth status
-            -->
-
-            <textarea name="status_text" draworder="1" align="center">
-                <multiline>yes</multiline>
-                <font>info</font>
-                <area>20,70,760,60</area>
-                <value>MythTV is idle and will shutdown shortly.</value>
-            </textarea>
-
-            <!-- 
-                current recordings status
-            -->
-            
-            <textarea name="recording_label" draworder="1" align="center">
-                <font>label</font>
-                <area>20,110,760,30</area>
-                <!--<value>Percent Complete </value>-->
-                 <value></value>
-            </textarea>
-
-            <textarea name="recording_text" draworder="1" align="hcenter">
-                <multiline>yes</multiline>
-                <font>biginfo</font>
-                <area>20,110,760,150</area>
-                <value></value>
-            </textarea>
-
-            <!-- 
-                next scheduled recording status
-            -->
-            
-            <textarea name="scheduled_label" draworder="1" align="center">
-                <font>label</font>
-                <area>20,320,760,30</area>
-                <value></value>
-            </textarea>
-
-            <textarea name="scheduled_text" draworder="1" align="hcenter">
-                <multiline>yes</multiline>
-                <font>biginfo</font>
-                <area>20,400,760,120</area>
-                <value></value>
-            </textarea>
-
-            <!-- 
-                scheduled recordings conflict warning
-            -->
-            
-            <textarea name="conflicts_text" draworder="1" align="center">
-                <font>warning</font>
-                <area>20,490,760,30</area>
-                <value>WARNING: There are conflicting scheduled recordings!</value>
-            </textarea>
-
-            <!-- 
-                start frontend button
-                     
-            <textbutton name="startfrontend_button" draworder="1">
-                <position>81,535</position>
-                <font>buttons</font>
-                <image function="on" filename="mw_text_button_on.png"></image>
-                <image function="off" filename="mw_text_button_off.png"></image>
-                <image function="pushed" filename="mw_text_button_pushed.png"></image>
-            </textbutton>
-
-            -->
-
-	   </container>
-    
-    </window>
-    
-</mythuitheme>
diff --git a/abs/core/live-installer/build_diskless.sh b/abs/core/live-installer/build_diskless.sh
deleted file mode 100755
index 4dfd5fc..0000000
--- a/abs/core/live-installer/build_diskless.sh
+++ /dev/null
@@ -1,143 +0,0 @@
-#!/bin/bash
-#CD=/mnt/cd
-. /etc/profile
-. /etc/systemconfig
-
-TFTP=/data/srv/tftp
-CD=/data/srv/tftp/live
-DESTCD=/data/srv/tftp/CD
-BASE=/data/srv/tftp/masterbuild
-
-MODULES=$DESTCD/MythVantage/base/
-myip=`ifconfig  | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/
-
-function log () {
-echo $1
-}
-
-function check_xvfb () {
-export    DISPLAY=127.0.0.1:25
- Xvfb -ac :25  &
-
-}
-
-
-function create_base_image() {
-echo $SRCFILES
-if [ -f $SRCFILES/data.lzm ]
-then
-    mkdir $HOST_IMG_DIR
-    cd $SRCFILES
-    echo "Creating image.." > $BASE/tmp/.install_state
-    LIST=`ls *.lzm`
-    for i in  $LIST
-    do
-       echo  $i
-       echo  $i > $BASE/tmp/.install_percent
-       lzm2dir $i \/$HOST_IMG_DIR
-    done
-
-    for i in sys proc dev tmp
-    do
-         mkdir /$HOST_IMG_DIR/$i
-    done
-
-    chmod 777 /$HOST_IMG_DIR/tmp
-    mknod /$HOST_IMG_DIR/dev/null c 1 3
-    mknod /$HOST_IMG_DIR/dev/null c 1 5
-    mknod /$HOST_IMG_DIR/dev/console c 5 1
-    chmod +s /$HOST_IMG_DIR/usr/bin/Xorg
-    chmod +s /$HOST_IMG_DIR/usr/bin/crontab
-    chmod +s /$HOST_IMG_DIR/usr/bin/sudo
-    chmod +s /$HOST_IMG_DIR/bin/mount
-    #copy fstab from masterbuild
-    cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab
-    echo "Done: installing data" > $BASE/tmp/.install_state
-    return 0
-else
-    echo "Error: no modules" > $BASE/tmp/.install_state
-    log "couldn't find modules to install"
-    return 1
-fi
-}
-
-function configure_image () {
-    echo "Configuring system" > $BASE/tmp/.install_state
-    cp -f $BASE/etc/systemconfig  $HOST_IMG_DIR/etc/systemconfig
-    chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
-    chmod 775 "$HOST_IMG_DIR" /etc/systemconfig
-    cp /etc/mtab $HOST_IMG_DIR/etc/mtab
-     mount --bind /dev $HOST_IMG_DIR/dev
-
-    chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
-#copy syssettings template to here.
-    SE=$BASE$TEMPLATES/settings/syssettings
-    mkdir -p  $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
-    cp -rp $SE/*  ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings
-    chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
-    chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
-    chmod -R 775  $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
-#update remotedb with this host settings
-    OLDDISPLAY=$DISPLAY
-    check_xvfb
-    chroot $HOST_IMG_DIR  $MV_ROOT/bin/MythVantage  -t  restore,default_1
-    chroot $HOST_IMG_DIR  $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-    if [ !  $? = 0 ]
-    then
-            touch $mountpoint/tmp/.dbsysfailed
-            chmod 777 $mountpoint/tmp/.dbsysfailed
-    else
-        #Run second time
-        chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
-        chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c  ACCESSCONTROL
-    fi
-chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
-cp -f $BASE/etc/X11/xorg.conf   $HOST_IMG_DIR/etc/X11/xorg.conf
-echo "Done" > $BASE/tmp/.install_state
-DISPLAY=$OLDDISPLAY
-
-#cp /tmp/mythvantage_install.log  $HOST_IMG_DIR/var/log/
-}
-
-function create_tftp_boot () {
-
-    CFGFILE=$TFTP/pxelinux.cfg/01-$2
-    echo "DEFAULT mythfe" > $CFGFILE
-    echo "LABEL mythfe" >> $CFGFILE
-    echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE
-    echo "append vga=normal root=/dev/nfs rw netboot  nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE
-    echo "TIMEOUT 2" >>  $CFGFILE
-}
-
-function create_nfs_export () {
-echo "/data/srv/tftp/$1    *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports
-exportfs -arv
-}
-
-#-------------------------------------------------------------------------------MAIN PROGRAM ---------------------------------------------------------------------
-if [ x$1 = x  -o   x$2 = x ]
-then
-    echo "usage:  hostname macaddress"
-	exit 1
-fi
-
-image_name=$1
-mac_address=`echo $2| tr "[:upper:]" "[:lower:]"`
-
-echo "using image_name of $image_name"
-echo "using mac_address of $mac_address"
-
-HOST_IMG_DIR=$TFTP/$1
-
-create_base_image $image_name
-configure_image
-umount $HOST_IMG_DIR/dev
-create_tftp_boot $image_name $mac_address
-create_nfs_export $image_name
-
-
-
-
-#create_dhcp_entry $mac_address
-
diff --git a/abs/core/live-installer/copy-to-mythbase.sh b/abs/core/live-installer/copy-to-mythbase.sh
deleted file mode 100755
index af89f52..0000000
--- a/abs/core/live-installer/copy-to-mythbase.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/bash
-
-DATADIR="../mythtv/stable/mythtv/src/mythtv-0.21/programs"
-mkdir $DATADIR/mythinstall
-mkdir $DATADIR/mythbeselect
-rm mythinstall.bin
-rm mythbeselect.bin
-ln -n `pwd`/mythinstall/* $DATADIR/mythinstall
-ln -n `pwd`/mythbeselect/* $DATADIR/mythbeselect
-
-ln -s  $DATADIR/mythbeselect/mythbeselect ./mythbeselect.bin
-ln -s  $DATADIR/mythinstall/mythinstall ./mythinstall.bin
diff --git a/abs/core/live-installer/create_master.sh b/abs/core/live-installer/create_master.sh
deleted file mode 100755
index 1e641b4..0000000
--- a/abs/core/live-installer/create_master.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-#CD=/mnt/cd
-CD=/data/srv/tftp/live
-DESTCD=/data/srv/tftp/CD
-DEST=/data/srv/tftp/masterbuild
-MODULES=$DESTCD/MythVantage/base/  
-myip=`ifconfig  | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-
-mkdir -p $DESTCD
-mkdir -p $DEST
-
-mount $CD
-status=0
-if [ -f $CD/MythVantage/base/data.lzm ]
-then
-	status=0
-else
-	status=1
-fi
-if [ x$status = x0 ]
-then
-	echo "copying to disk"
-	cp -rp $CD/*  $DESTCD
-	cd $MODULES
-	   for i in *.lzm 
-	   do
-		   echo $i
-		   lzm2dir $i \/$DEST
-	   done
-        for i in sys proc dev tmp
-        do
-        	mkdir $DEST/$i
-        done
-        chmod 777 /$DEST/tmp
-	mknod $DEST/dev/null c 1 3
-        mknod $DEST/dev/null c 1 5
-        mknod $DEST/dev/console c 5 1
-        chmod +s $DEST/usr/bin/Xorg
-        chmod +s $DEST/usr/bin/crontab
-        chmod +s $DEST/usr/bin/sudo
-        chmod +s $DEST/bin/mount
-fi
-if [ ! -f $DEST/etc/fstab.bak ]
-then
-	cp $DEST/etc/fstab $DEST/etc/fstab.bak
-fi
-tac $DEST/etc/fstab.bak|tail +4|tac  > $DEST/etc/fstab
-echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab
-echo "/data/srv/tftp/masterbuild  *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports
-
-
-exportfs -arv
-
-#copy in the modules
-mkdir -p $DEST/mnt/live/mnt/
-mv $DESTCD/*  $DEST/mnt/live/mnt/
-
diff --git a/abs/core/live-installer/file_time_offset.py b/abs/core/live-installer/file_time_offset.py
deleted file mode 100755
index f2973d0..0000000
--- a/abs/core/live-installer/file_time_offset.py
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/usr/bin/python
-
-
-import time
-import os
-import glob
-import getopt
-import sys
-def main(argv):
-    filecount=0
-#    root = "/tmp"
-#    offset = 4
-    now = int(time.time())
-
-
-    try:
-        opts, args = getopt.getopt(argv, "hs:d:")
-    except getopt.GetoptError:
-        sys.exit(2)
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-                print "-s seconds -d /testdir"
-                print "default if 4 seconds"
-                sys.exit()
-        elif opt in ( "-s" ):
-                offset = int(arg)
-        elif opt in ("-d"):
-                root = arg
-
-    for item in glob.glob(root+"/*"):
-        lastmodDate = os.path.getmtime(item)
-        tdiff= now-lastmodDate
-        #print tdiff, offset
-
-        if tdiff > offset:
-            filecount+=1
-    print filecount
-if __name__ == "__main__":
-    main(sys.argv[1:])
diff --git a/abs/core/live-installer/install-ui.xml b/abs/core/live-installer/install-ui.xml
deleted file mode 100755
index 0ec9ddb..0000000
--- a/abs/core/live-installer/install-ui.xml
+++ /dev/null
@@ -1,175 +0,0 @@
-<!--
-
-    This is a myth style theme file for mythwelcome
-
-    (c) 2005 by a whole bunch of people associated with MythTV
-
--->
-<mythuitheme>
-
-    <window name="welcome_screen">
-
-        <!--
-
-            First, define all the fonts we need on this screen
-
-        -->
-       <font name="title" face="Arial">
-           <color>#ffff00</color>
-           <dropcolor>#000000</dropcolor>
-           <size>24</size>
-           <shadow>3,3</shadow>
-           <bold>yes</bold>
-       </font>
-
-       <font name="time" face="Arial">
-            <color>#9999cc</color>
-            <size>18</size>
-            <bold>yes</bold>
-       </font>
-
-       <font name="label" face="Arial">
-            <color>#ffff00</color>
-            <dropcolor>#000000</dropcolor>
-            <size>18</size>
-            <shadow>3,3</shadow>
-            <bold>yes</bold>
-       </font>
-
-       <font name="info" face="Arial">
-            <color>#ffffff</color>
-            <size>18</size>
-            <bold>yes</bold>
-       </font>
-
-       <font name="biginfo" face="Arial">
-	       <color>#ffffff</color>
-	       <size>50</size>
-	       <bold>yes</bold>
-       </font>
-       <font name="warning" face="Arial">
-            <color>#ff0000</color>
-            <dropcolor>#000000</dropcolor>
-            <size>16</size>
-            <shadow>2,2</shadow>
-            <bold>yes</bold>
-       </font>
-
-       <font name="buttons" face="Arial">
-            <color>#ffff00</color>
-            <size>14</size>
-            <bold>yes</bold>
-       </font>
-       <font name="tinyinfo" face="Arial">
-           <color>#9999cc</color>
-           <size>12</size>
-           <bold>no</bold>
-       </font>
-
-       <container name="main_display">
-            <area>0,0,800,600</area>
-
-            <textarea name="title" draworder="0" align="center">
-                <multiline>no</multiline>
-                <font>title</font>
-                <area>50,40,700,40</area>
-                <value>LinHes: The Linux Home Entertainment System </value>
-            </textarea>
-
-            <!--
-                time
-            -->
-            <textarea name="time_text" draworder="0" align="right">
-                <multiline>no</multiline>
-                <font>time</font>
-                <area>660,520,110,30</area>
-                <value></value>
-            </textarea>
-
-            <textarea name="date_text" draworder="0" align="hcenter">
-                <multiline>yes</multiline>
-                <font>time</font>
-                <area>20,75,740,100</area>
-                <value></value>
-            </textarea>
-
-            <!--
-                current myth status
-            -->
-
-            <textarea name="status_text" draworder="1" align="center">
-                <multiline>yes</multiline>
-                <font>info</font>
-                <area>20,100,760,60</area>
-                <value>MythTV is idle and will shutdown shortly.</value>
-            </textarea>
-
-            <!--
-                current recordings status
-            -->
-
-            <textarea name="recording_label" draworder="1" align="center">
-                <font>label</font>
-                <area>20,140,760,30</area>
-                <!--<value>Percent Complete </value>-->
-                 <value></value>
-            </textarea>
-
-            <textarea name="recording_text" draworder="1" align="hcenter">
-                <multiline>yes</multiline>
-                <font>biginfo</font>
-                <area>20,140,760,150</area>
-                <value></value>
-            </textarea>
-
-            <!--
-                next scheduled recording status
-            -->
-
-            <textarea name="scheduled_label" draworder="1" align="center">
-                <font>label</font>
-                <area>20,320,760,30</area>
-                <value></value>
-            </textarea>
-
-            <textarea name="scheduled_text" draworder="1" align="hcenter">
-                <multiline>yes</multiline>
-                <font>biginfo</font>
-                <area>20,400,760,120</area>
-                <value></value>
-            </textarea>
-
-            <textarea name="mythvantage_text" draworder="1" align="right">
-                <multiline>no</multiline>
-                <font>tinyinfo</font>
-                <area>20,560,760,30</area>
-                <value></value>
-            </textarea>
-            <!--
-                scheduled recordings conflict warning
-            -->
-
-            <textarea name="conflicts_text" draworder="1" align="center">
-                <font>warning</font>
-                <area>20,490,760,30</area>
-                <value>WARNING: There are conflicting scheduled recordings!</value>
-            </textarea>
-
-            <!--
-                start frontend button
-
-            <textbutton name="startfrontend_button" draworder="1">
-                <position>81,535</position>
-                <font>buttons</font>
-                <image function="on" filename="mw_text_button_on.png"></image>
-                <image function="off" filename="mw_text_button_off.png"></image>
-                <image function="pushed" filename="mw_text_button_pushed.png"></image>
-            </textbutton>
-
-            -->
-
-	   </container>
-
-    </window>
-
-</mythuitheme>
diff --git a/abs/core/live-installer/install_db_chroot.sh b/abs/core/live-installer/install_db_chroot.sh
deleted file mode 100755
index 514dd3c..0000000
--- a/abs/core/live-installer/install_db_chroot.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. /etc/systemconfig
-#myhost=`cat /etc/hostname`
-myhost=$hostname
-hostname $myhost
-mount -t proc none /proc
-pacman --noconfirm -Sf mysql
-/etc/rc.d/mysqld
-
-status=1
-mysqlstatus=1
-while [ ! $status = 0  ]
-do
-    /etc/rc.d/mysqld stop
-    sleep 1
-    /etc/rc.d/mysqld start
-    mysqlstatus=$?
-    if [ $mysqlstatus = 0 ]
-    then
-   	mysql -e "show databases;"
-        showstatus=$?
-        if [ $showstatus = 0 ]
-        then
-            pacman --noconfirm -R mythdb-initial
-            pacman --noconfirm  -S mythdb-initial
-            $MV_ROOT/bin/restore_default_settings.sh -c load
-            DISPLAY=127.0.0.1:0  $MV_ROOT/bin/MythVantage  -t  restore,default_1
-            $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-            $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
-            if [ $SystemType = "Master_backend" ]
-            then
-                $MV_ROOT/bin/restore_default_settings.sh  -c  BECONFIG  -s master  -a $dbhost
-            fi
-            #update database to allow user jobs on this host.
-            $MV_ROOT/bin/restore_default_settings.sh  -c  USERJOBALLOW
-            $MV_ROOT/bin/restore_default_settings.sh  -c  ACCESSCONTROL
-	   #if [ -d /data/srv/mysql/mythconverg ]
-	   if [ -d /var/lib/mysql/mythconverg ]
-	   then
-	 #   pacman --noconfirm -R webcalendar
-         #   pacman --noconfirm --nodeps  -S webcalendar
-	    status=0
-	   fi
-   	fi
-    fi
-done
-#/etc/rc.d/mysqld stop
-#umount /proc
-
-
-
diff --git a/abs/core/live-installer/install_functions.sh b/abs/core/live-installer/install_functions.sh
deleted file mode 100755
index 0c43c97..0000000
--- a/abs/core/live-installer/install_functions.sh
+++ /dev/null
@@ -1,484 +0,0 @@
-#!/bin/bash
-. /etc/profile
-disk=$2
-mountpoint=new_boot
-
-#-------------------------------------------
-MYTHDBUSER=mythtv
-MYTHTVPASSWD=[REDACTED]
-CMDLINE=$(cat /proc/cmdline)
-hostname=`hostname`
-MYSQLCMD_C="mysql -u$MYTHDBUSER  -p$MYTHTVPASSWD mythconverg -B --exec"
-BASE=""
-
-function update_db_settings () {
-
- $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO  settings set value='${1}', data='${2}' , hostname=\"$hostname\";"
-}
-
-function random_theme () {
-THEMES="basic-blue
-basic-green
-basic-red
-basic-purple
-basic-amber"
-
-theme=($THEMES)                # Read into array variable.
-
-num_themes=${#theme[*]}        # Count how many elements.
-
-pick=${theme[$((RANDOM%num_themes))]}
-echo "Selected $pick as the theme"
-update_db_settings Theme "$pick"
-}
-
-
-function setupremote {
-    mv $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
-    if [ -d $TEMPLATES/remotes/$Remotetype ]
-    then
-            cd $TEMPLATES/remotes/$Remotetype
-            for i in lircd*
-            do
-                    cat $i >> $BASE/etc/lircd.conf
-            done
-            cp lircrc $BASE/etc/lircrc
-            chmod 755 /etc/lircrc
-            update_db_settings HostRemoteType  "$Remotetype"
-            /usr/sbin/lircd  -d /dev/lirc0
-        mkdir /root/.mythtv
-        ln -s /etc/lircrc /root/.mythtv/lircrc
-    fi
-}
-
-function scan_for_usb_remote () {
-echo "Scanning for usb receiver/remote"
-while read line
-do
-    USBID=`echo "$line"|cut -f1`
-    lsusb -d "$USBID" > /dev/null 2>/dev/null
-    if [ $? = 0 ]
-    then
-        Remotetype=`echo "$line"|cut -f2`
-        echo "found $Remotetype"
-        setupremote
-        break
-    fi
-done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-}
-
-function rest_of_network () {
-    #netmask
-    echo $CMDLINE | grep -q netmask
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*netmask=}
-        NETMASK=${TEMPVAR%% *}
-        /sbin/ifconfig eth0 $IP netmask $NETMASK
-        nm=`/usr/bin/nmconv.py -obits  $NETMASK`
-        NETMASK="/$nm $NETMASK"
-        echo $NETMASK
-        update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK"
-    else
-        echo "netmask not found"
-    fi
-    #gateway
-    echo $CMDLINE | grep -q gateway
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*gateway=}
-        GATEWAY=${TEMPVAR%% *}
-        /sbin/route add default  gw $GATEWAY
-        update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY"
-
-        else
-        echo "gateway not found"
-    fi
-
-    #dns
-    echo $CMDLINE | grep -q dns
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*dns=}
-        DNS=${TEMPVAR%% *}
-        echo "nameserver $DNS" >> /etc/resolv.conf
-        update_db_settings HostDNS${MYTHDEFAULT} "$DNS"
-        else
-        echo "DNS not found"
-    fi
-}
-
-function init_network {
-    echo $CMDLINE |grep -q netdev
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*netdev=}
-        MYTHDEFAULT=${TEMPVAR%% *}
-    else
-        MYTHDEFAULT="eth0"
-    fi
-
-
-
-    echo $CMDLINE | grep -q ip
-    if [ $? = 0 ]
-    then
-        update_db_settings HostDefaulteth0 0
-        update_db_settings HostDefault${MYTHDEFAULT} 1
-
-        update_db_settings HostActiveonbooteth0 0
-        update_db_settings HostActiveonboot${MYTHDEFAULT} 1
-        update_db_settings HostNetDevice ${MYTHDEFAULT}
-
-        TEMPVAR=${CMDLINE#*ip=}
-        IP=${TEMPVAR%% *}
-        if [ x$IP = xdhcp ]
-        then
-            /sbin/dhcpcd $MYTHDEFAULT
-            update_db_settings HostUseDHCP${MYTHDEFAULT} 0
-        else
-            /sbin/ifconfig ${MYTHDEFAULT} $IP
-            update_db_settings HostUseDHCP${MYTHDEFAULT} 1
-            update_db_settings HostIP${MYTHDEFAULT} "$IP"
-            rest_of_network
-        fi
-    fi
-}
-
-function init_remote {
-    echo $CMDLINE | grep -q remoteport
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*remoteport=}
-        REMOTEPORT=${TEMPVAR%% *}
-    if [ x"$ReceiverType" = "xSerial" ]
-    then
-        if [ -e /dev/$REMOTEPORT ]
-        then
-            /usr/bin/setserial /dev/$REMOTEPORT uart none
-            /sbin/modprobe lirc_serial
-            update_db_settings HostReceiverType Serial
-            update_db_settings HostSerialPortlirc "$REMOTEPORT"
-        fi
-    fi
-
-    fi
-
-    echo $CMDLINE | grep -q remote
-    if [ $? = 0 ]
-    then
-        TEMPVAR=${CMDLINE#*remote=}
-        Remotetype=${TEMPVAR%% *}
-        setupremote
-    else
-        scan_for_usb_remote
-    fi
-}
-
-#-----------------------
-
-#set -x
-
-partition_it () {
-ROOT=$1
-DATA=$2
-SWAP=$3
-
-if [ ! x$SWAP = xNO ]
-	then
-		SWAPLINE=",$SWAP,S"
-        MKSWAPCMD="mkswap /dev/${disk}2"
-	else
-		SWAPLINE=",0,0"
-       MKSWAPCMD=""
-	fi
-
-if [ x$DATA = xALL ]
-then
-	DATALINE=",,,"
-	EXTRALINE=""
-else
-	DATALINE=",$DATA,,"
-	EXTRALINE=",0,,"
-fi
-sfdisk /dev/$disk -uM << EOF
-,$1,,*
-$SWAPLINE
-$DATALINE
-$EXTRALINE
-;
-EOF
-
-$MKSWAPCMD
-#sfdisk -l /dev/$disk
-}
-
-
-function fscmd () {
-
-case $1 in
-       reiserfs) FSCMDC="mkreiserfs -q -l ROOT"
-                ;;
-
-        xfs)    FSCMDC="mkfs -t $1 -f"
-                ;;
-        ext3)   FSCMDC="mkfs.ext3"
-                ;;
-        jfs)    FSCMDC="mkfs.jfs -q "
-                                ;;
-        *)  FSCMDC="echo $1"
-        ;;
-
-esac
-}
-
-format_it ()  {
-    fscmd $1
-    $FSCMDC /dev/${disk}1|  tr -s [:cntrl:]  \\n
-    fscmd $2
-    $FSCMDC /dev/${disk}3|  tr -s [:cntrl:]  \\n
-}
-
-mount_it () {
-        if [ ! -d \/$mountpoint ]
-        then
-        mkdir \/$mountpoint
-        fi
-        mount /dev/${disk}1  \/$mountpoint
-        mkdir \/$mountpoint/data
-        mount /dev/${disk}3 \/$mountpoint/data
-}
-
-unmount_it () {
-        umount /dev/${disk}1
-        umount /dev/${disk}3
-}
-
-#linux-live version of copy_it
-# copy_it () {
-#         #rsync -rvp --exclude=/mnt --exclude=\/$mountpoint  / \/$mountpoint
-#         lzmdir=`find /mnt/live/mnt -name  data.lzm -execdir pwd \;| tail -1`
-#          cd $lzmdir
-#         if [ x$1 = xALL ]
-#         then
-#             LIST=`ls *.lzm`
-#             else
-#             LIST=`echo $1 | tr , " " `
-#         fi
-# 
-#         for i in  $LIST
-#         do
-#              echo "Transferring $i"
-#             lzm2dir $i \/$mountpoint
-#         done
-#         for i in sys proc dev tmp
-#         do
-#         mkdir /$mountpoint/$i
-# 
-#         done
-#         chmod 777 /$mountpoint/tmp
-# 	    mknod /$mountpoint/dev/null c 1 3
-#         mknod /$mountpoint/dev/null c 1 5
-#         mknod /$mountpoint/dev/console c 5 1
-#         chmod +s /$mountpoint/usr/bin/Xorg
-#         chmod +s /$mountpoint/usr/bin/crontab
-#         chmod +s /$mountpoint/usr/bin/sudo
-#         chmod +s /$mountpoint/bin/mount
-# 
-# }
-
-copy_it () {
-        
-        if [ x$1 = xALL ]
-        then
-            echo "Transferring system"
-            unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
-        else
-             echo "Upgrading system"
-            unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf
-        fi
-
-        for i in sys proc dev tmp
-        do
-        mkdir /$mountpoint/$i
-
-        done
-        chmod 777 /$mountpoint/tmp
-        mknod /$mountpoint/dev/null c 1 3
-        mknod /$mountpoint/dev/null c 1 5
-        mknod /$mountpoint/dev/console c 5 1
-        chmod +s /$mountpoint/usr/bin/Xorg
-        chmod +s /$mountpoint/usr/bin/crontab
-        chmod +s /$mountpoint/usr/bin/sudo
-        chmod +s /$mountpoint/bin/mount
-
-}
-
-
-device_node () {
-                cd /dev
-                mknod hda b 3 0
-                mknod hda1 b 3 1
-                mknod hda2 b 3 2
-                mknod hda3 b 3 3
-                mknod hda4 b 3 4
-                mknod hda5 b 3 5
-                mknod hda6 b 3 6
-                mknod hda7 b 3 7
-                mknod hda8 b 3 8
-                mknod sda b 8 0
-                mknod sda1 b 8 1
-                mknod sda2 b 8 2
-                mknod sda3 b 8 3
-                mknod sda4 b 8 4
-                mknod sda5 b 8 5
-                mknod sda6 b 8 6
-                mknod sda7 b 8 7
-                mknod sda8 b 8 8
-                mknod sdb b 8 16
-                mknod sdb1 b 8 17
-                mknod sdb2 b 8 18
-                mknod sdb3 b 8 19
-                mknod sdb4 b 8 20
-                mknod sdb5 b 8 21
-                mknod sdb6 b 8 22
-                mknod sdb7 b 8 23
-                mknod sdb8 b 8 24
-                cd -
-                }
-
-
-function create_fstab()
-{
-echo "creating fstab"
-cat > /$mountpoint/etc/fstab << EOF
-# <file system>        <dir>         <type>    <options>          <dump> <pass>
-none                   /dev/pts      devpts    defaults            0      0
-none                   /dev/shm      tmpfs     defaults            0      0
-/dev/cdrom /media/cdrom   auto    ro,user,noauto,unhide   0      0
-/dev/dvd /media/dvd   auto    ro,user,noauto,unhide   0      0
-UUID=ROOTUID / auto defaults 0 1
-UUID=DATAUID /data auto defaults 0 1
-UUID=SWAPUID swap swap defaults 0 0
-EOF
-
-
-}
-
-
-function find_uuid() {
-    uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2`
-    echo $uuid for $1
-    FOUNDUUID=$uuid
-    
-}
-
-
-case $1 in
-        partition_it )
-	#drive  ROOT DATA(ALL) SWAP(NO)
-                for i in `mount | grep $disk | awk ' { print $1 } '`
-                do
-                umount $i
-                done
-		swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '`
-		swapoff $swap
-                partition_it $3 $4 $5
-                exit 0
-
-        ;;
-        format_it )
-                device_node
-
-                format_it $3 $4
-                exit 0
-        ;;
-        mount_it )
-                mount_it
-        ;;
-        copy_it )
-                copy_it $3
-
-        ;;
-
-
-        fstab_fix_it)
-                    echo $@ >> /tmp/fstab.input
-                    if [  ! -f  /$mountpoint/etc/fstab ]
-                    then
-                        create_fstab
-                    fi
-                    if [ x$5 = xUPGRADE ]
-                    then
-                       cp -f /tmp/etc/fstab /$mountpoint/etc/fstab
-                    fi
-
-#                    if  [ x$5 =  xFULL_INSTALL ] 
-#                    then
-                     #search for UUID
-                      FOUNDUUID=""
-                      find_uuid ${2}1
-                      ROOTUUID=$FOUNDUUID
-                        echo "--"
-                        echo $ROOTUUID
-                        echo "--"
-                      FOUNDUUID=""
-                      find_uuid ${2}2
-                      SWAPUUID=$FOUNDUUID
-
-                      FOUNDUUID=""
-                      find_uuid ${2}3
-                      DATAUUID=$FOUNDUUID
-#                    fi
-
-
-
-                    
-                        
-                     sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/  auto defaults,noatime 0 1/g"  /$mountpoint/etc/fstab 
-                     sed -i -e "s/.*\/data\ .*$/UUID=$DATAUUID \/data  auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab
-                     sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults  0/g" /$mountpoint/etc/fstab
-
-#                     sed -e "s/\ \/\ .*$/\ \/ $3 defaults 0 1/g"\
-#                         -e "s/\ \/data .*$/\ \/data $4 defaults 0 1/g" /$mountpoint/etc/fstab   > /tmp/fstab
-# 
-# 
-#                     cp /tmp/fstab /$mountpoint/etc/fstab
-        ;;
-
-        grub_it )
-                #linux-live
-                #grub-install  --recheck --no-floppy  --root-directory=/$mountpoint /dev/$disk
-                grub-install  --recheck --no-floppy  --root-directory=/$mountpoint "(hd0)"
-		 
-
-        #fixing fstab
-#                     if [  ! -f  /$mountpoint/etc/fstab ]
-#                     then
-#                         cp  -f /$mountpoint/etc/fstab.install  /$mountpoint/etc/fstab
-#                     fi
-# 		sed -e s/hda/$disk/g /$mountpoint/etc/fstab > /tmp/newfstab
-# 		cp -f /tmp/newfstab /$mountpoint/etc/fstab
-
-		#fixing grub/menu.1st
-        FOUNDUUID=""
-        find_uuid ${disk}1
-        ROOTUUID=$FOUNDUUID
-#		sed -e s/hda/$disk/g /$mountpoint/boot/grub/menu.lst > /tmp/menu.lst
-       
-		sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g"   /$mountpoint/boot/grub/menu.lst
-
-
-#cp -f /tmp/menu.lst /$mountpoint/boot/grub/menu.lst
-		#cp /etc/X11/xorg.conf /$mountpoint/etc/X11/xorg.conf
-        mkinitcpio -g /$mountpoint/boot/kernel26.img
-                ;;
-        umount_it)
-
-                umount \/$mountpoint/data
-                umount \/$mountpoint
-esac
-
-
-
diff --git a/abs/core/live-installer/install_proxy.sh b/abs/core/live-installer/install_proxy.sh
deleted file mode 100755
index ec7f29c..0000000
--- a/abs/core/live-installer/install_proxy.sh
+++ /dev/null
@@ -1,481 +0,0 @@
-#!/bin/bash
-#chroot  and /tmp
-MVHOSTNAME=mvi
-. /etc/profile
-TEMP_TEMPLATES=/tmp/templates
-disk=$2
-rootfs=$3
-rootsize=$4
-datafs=$5
-datasize=$6
-swapsize=$7
-mountpoint="/new_boot"
-run=$MV_ROOT/bin/install_functions.sh
-. /etc/systemconfig 2>/dev/null
-. $MV_ROOT/bin/networkconfig.sh
-CMDLINE=$(cat /proc/cmdline)
-
-#TEMPNET="Hostip"$default_interface
-#eval MYTHIP=\$${TEMPNET}
-
-
-progress () {
-mypercent=`echo "$1" | cut -d. -f1`
-if [  x$mypercent = x ]
-then
-echo "" > /tmp/.install_percent
-else
-echo "${mypercent}% complete" > /tmp/.install_percent
-fi
-
-
-}
-
-
-
-
-full_install () {
-    if [ -f /tmp/.this_is_upgrade ]
-    then
-        rm /tmp/.this_is_upgrade
-    fi
-    echo "Partitioning $disk" > /tmp/.install_state
-    progress 1
-    sleep 1
-    $run partition_it $disk $rootsize $datasize $swapsize
-
-    echo "Formatting $disk" > /tmp/.install_state
-        progress 2
-    sleep 1
-    $run format_it $disk $rootfs $datafs
-
-    echo "Preparing $disk" > /tmp/.install_state
-    progress 3
-    sleep 1
-    $run mount_it $disk
-
-    startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
-
-    echo "STARTSIZE=$startsize">/tmp/.startsize.io
-    echo "Installing data" > /tmp/.install_state
-
-    sleep 1
-        $run copy_it $disk ALL
-        rm $mountpoint/etc/fstab
-        $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
-
-    progress 99
-    sleep 1
-    $run grub_it $disk
-
-
-    echo "Configuring system" > /tmp/.install_state
-        progress 100
-        sleep 1
-        cp -f /etc/systemconfig "$mountpoint"/etc
-    #run save syssettings to save settings, then copy to new mountpoint
-        $MV_ROOT/bin/restore_default_settings.sh  -c save -t syssettings -h $MVHOSTNAME -d 127.0.0.1
-        SE=$TEMPLATES/settings/syssettings
-        mkdir -p ${mountpoint}$SE
-        cp -rp $SE/*  ${mountpoint}$SE/
-        chown root:mythtv "$mountpoint"/etc/systemconfig
-        chown -R mythtv:mythtv ${mountpoint}$SE
-
-        chmod -R 775   ${mountpoint}$SE
-        chmod 775 "$mountpoint"/etc/systemconfig
-        #copy over any updates that might have occured
-        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
-        chmod -R 755 ${mountpoint}/root
-        cp /etc/mtab "$mountpoint"/etc/mtab
-      
-
-    if  [ $SystemType = "Master_backend" -o $SystemType = "Standalone"  ]
-    then
-            #installing DB to local machine
-                #turn off old live database, so the chroot one can start
-            /etc/rc.d/mysqld stop
-            mount --bind /dev "$mountpoint/dev"
-            chroot "$mountpoint"   "$MV_ROOT/bin/install_db_chroot.sh"  >  /tmp/chrootdb.out
-            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-            echo "stopping mysql in chroot"
-            chroot "$mountpoint" /etc/rc.d/mysqld stop
-            umount "$mountpoint/dev"
-            
-            #/etc/rc.d/mysqld start
-    else
-            #update remotedb with this host settings
-            chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
-            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-            if [ !  $? = 0 ]
-            then
-                touch $mountpoint/tmp/.dbsysfailed
-                chmod 777 $mountpoint/tmp/.dbsysfailed
-            else
-            #Run second time
-            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c  ACCESSCONTROL
-            fi
-    fi
-    chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced
-    echo "Done" > /tmp/.install_state
-    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
-    $run unmount_it $disk
-}
-
-function createsquashlist(){
-if [ -f $1 ]
-then
-    rm -f 
-$1
-fi
-for i in bin boot etc home lib opt root sbin usr var
-do
-echo $i >> $1
-done
-
-
-}
-
-
-
-
-function upgrade () {
-    touch /tmp/.this_is_upgrade
-
-    if [ ! x$rootfs = "xDo_not_format" ]
-    then
-        echo "Formatting $disk" > /tmp/.install_state
-            progress 2
-            sleep 1
-            $run format_it $disk $rootfs NO
-    fi
-    echo "Preparing $disk" > /tmp/.install_state
-        progress 3
-        sleep 1
-        $run mount_it $disk
-        startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
-        echo "STARTSIZE=$startsize">/tmp/.startsize.io
-        echo "Installing data" > /tmp/.install_state
-        sleep 1
-        cp -rf /tmp/etc /new_boot/etc.old
-        cp -rf  /tmp/oss /new_boot/var/lib/oss.old
-        #$run copy_it $disk bin.lzm,boot.lzm,etc.lzm,home.lzm,lib.lzm,opt.lzm,root.lzm,sbin.lzm,usr.lzm,var.lzm
-        SQUASHLIST="/tmp/.squashlist"
-        createsquashlist $SQUASHLIST
-        $run copy_it $disk $SQUASHLIST
-        #copy back ssh keys
-
-        cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
-        cp -fp /new_boot/etc.old/ssh/*.pub   /new_boot/etc/ssh/
-        cp -fp /new_boot/etc.old/ssh/*.key   /new_boot/etc/ssh/
-        cp -fp /new_boot/etc.old/ssh/*key   /new_boot/etc/ssh/
-        
-        #funckeys
-        cadir=/etc/pki/func/ca
-        mv /new_boot/etc/pki  /new_boot/etc/pki.new
-        cp -rp /new_boot/etc.old/pki  /new_boot/etc/
-        #passwd/shadow/group
-        cp -fp /new_boot/etc.old/passwd /new_boot/etc/
-        cp -fp /new_boot/etc.old/shadow /new_boot/etc/
-        cp -fp /new_boot/etc.old/group   /new_boot/etc/
-
-        if [  x$rootfs = "xDo_not_format" ]
-        then
-            #rootfs=`grep ${disk}1 /tmp/etc/fstab |awk ' { print $3 } '`
-            rootfs=`grep \/\  /tmp/etc/fstab |awk ' { print $3 } '`
-        fi
-            #datafs=`grep ${disk}3 /tmp/etc/fstab |awk ' { print $3 } '`
-            datafs=`grep \/data /tmp/etc/fstab |awk ' { print $3 } '`
-            $run fstab_fix_it $disk $rootfs $datafs UPGRADE
-
-    echo "Writing boot sector" > /tmp/.install_state
-        progress 99
-        sleep 1
-        $run grub_it $disk
-
-
-    echo "Configuring system" > /tmp/.install_state
-        progress
-        sleep 1
-        cp /etc/mtab "$mountpoint"/etc/mtab
-        cp -f /etc/systemconfig "$mountpoint"/etc
-        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
-        chmod -R 755 ${mountpoint}/root
-        chown root:mythtv "$mountpoint"/etc/systemconfig
-        chmod 775 "$mountpoint"/etc/systemconfig
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-        #wrap this in a network check_network, no need to update the db if the import worked.
-#####  do I need to start mysql?
-        chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
-        chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-        #
-    #Run second time
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
-
-    #  fi
-
-    echo "Done" > /tmp/.install_state
-    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
-    $run unmount_it $disk
-}
-
-function netboot-full_install () {
-    TEMPVAR=${CMDLINE#*nfsroot=}
-    NFSROOT=${TEMPVAR%% *}
-    NFSROOT=`echo $NFSROOT|cut -d: -f1`
-    MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
-    URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
-    echo "calling $URL"
-    echo "Starting" > /tmp/.install_state
-    curl $URL
-    ${MV_ROOT}/bin/xconfig.sh
-}
-
-function killdhcp () {
-if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
-        then
-            pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
-            kill -9 $pid
-            rm -f /etc/dhcpc/dhcpcd-eth0.pid
-            rm -f /var/run/dhcpcd*
-        fi
-if [ -f /var/run/dhcpcd-eth0.pid ]
-        then
-            pid=`cat /var/run/dhcpcd-eth0.pid`
-            kill -9 $pid
-            rm -f /var/run/dhcpcd-eth0.pid*
-        fi
-ip address flush dev eth0
-}
-
-
-# function vnc_check() {
-#     CMDLINE=$(cat /proc/cmdline)
-#     echo $CMDLINE |grep -q vnc
-#     USEVNC=$?
-#     echo $CMDLINE |grep -q nfsroot
-#      NETBOOT=$?
-#     echo $USEVNC
-# 	if [ !  x$USEVNC = x0  ]
-# 	then
-# 	    echo "not using vnc"
-#         if [ !  x$NETBOOT = x0  ]
-#         then
-#             echo "not using netboot"
-#         else
-#             echo "using netboot"
-#             USEVNC=0
-#         fi
-# 
-#     else
-#         echo " using vnc"
-#     fi
-# }
-
-
-# function network_setup () {
-# DEVICE=eth0
-#     if [ ! -f /etc/systemconfig ]
-#     then
-#         exit 1
-#     fi
-# 
-# if [ ! x$USEVNC = x0  ]
-# then
-#     echo "Resetting  the network"
-#     killdhcp
-#     if [ $UseDHCP = 0 ]
-#     then
-#          /sbin/dhcpcd $DEVICE
-#             if [ ! $? = 0 ]
-#             then
-#                 exit 2
-#             fi
-#         fi
-# else
-#   echo "using vnc/netboot, will not reset network"
-#   echo "nameserver $nameserver" > /etc/resolv.conf
-#   return 0
-# fi
-# 
-# if [ $UseDHCP = 1 ]
-# then
-# 
-#         /sbin/ifconfig $DEVICE $ip
-#         /sbin/route add default gw $route
-#         echo "nameserver $nameserver" > /etc/resolv.conf
-# 
-# fi
-# 
-# 
-# }
-
-function SANE_SYSETTINGS () {
-sed -e '/HOSTrootfstype/d' \
-        -e '/HOSTrootfstype/d' \
-        -e '/HOSTdatafstype/d' \
-        -e '/HOSTOSsize/d'  \
-        -e '/HostUseALLdata/d'  \
-        -e '/HOSTDATAsize/d'    \
-        -e '/HOSTuprootfstype/d'    \
-        -e '/HostUseSWAP/d' \
-        -e '/HOSTSWAPsize/d  ' /tmp/templates/settings/syssettings/settings.txt  >  /tmp/settings.new
-    mv  /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
-}
-
-case $1 in
-        full_install_it )         full_install       ;;
-
-        NETBOOT)
-echo "-----------------------------------------------------------------------3-----"
-         netboot-full_install   ;;
-
-        find_update)
-            #TRY TO mount first partition of drive
-            #copy /etc/systemconfig to live,  import settings into db
-            #umount drive
-            $run mount_it $disk
-                if [ -f /new_boot/etc/systemconfig ]
-                then
-                ###########ADD templates
-                mkdir -p $TEMP_TEMPLATES
-                cp -pr /new_boot/$TEMPLATES  $TEMP_TEMPLATES
-                SANE_SYSETTINGS
-                cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/
-
-
-                cp /new_boot/etc/systemconfig /etc/systemconfig
-                cp -rf  /new_boot/etc /tmp/etc
-                cp -rf /new_boot/var/lib/oss  /tmp/oss
-
-                $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME  -d 127.0.0.1
-                fi
-            $run umount_it $disk
-            ;;
-
-        upgrade_it)
-                #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs +  "&"
-                upgrade
-
-            ;;
-        disk_model_it)
-                        model="unknown"
-                            size="xxx"
-                        case $2 in
-
-                            h* )
-                                    model=`cat /proc/ide/$2/model`
-                                    ;;
-                            s*)     model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
-                                    ;;
-                        esac
-                                size=`parted /dev/$2  print |grep Disk|awk  ' { print $3 } '  `
-
-
-                                echo ""$model" $size " >/tmp/model
-
-            ;;
-        network_check_it)
-                        #Should never return from check_network
-                        case $2 in
-                                setup_network)
-                                         vnc_check
-                                         install_network_setup
-                                ;;
-
-                                check_self)
-                                            myipdefault=`ifconfig  | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
-                                            ping -c 1 $myipdefault
-                                                    if [ ! $? = 0 ]
-                                                    then
-                                                        exit 3
-                                                        #can't ping yourself
-                                                    fi
-                                ;;
-                                check_gw)
-                                            #check gateway
-                                            mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'`
-					                        if  [ !  x$mygwdefault = x ]
-					                        then
-	                                            ping -c 1 $mygwdefault
-        	                                    if [ ! $? = 0 ]
-                	                            then
-                        	                        exit 4
-                                	      	    fi
-				                            fi
-                                ;;
-                                check_ns)
-                                            #check nameserver
-                                                    mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
-                                                    ping -c 1 $mydns
-                                                    if [ ! $? = 0 ]
-                                                    then
-                                                        exit 5
-                                                    fi
-                                ;;
-                                check_names)
-                                            host google.com
-                                            if [ ! $? = 0 ]
-                                            then
-                                                exit 6
-                                            fi
-                                ;;
-                                host_names)
-                                            host $hostname
-                                            if [  $? = 0 ]
-                                            then
-                                                exit 7
-                                            fi
-                                ;;
-
-                            esac
-                        exit 0
-            ;;
-
-
-        * )
-            state=`cat /tmp/.install_state`
-            if  [  x"${state}" =  "xConfiguring system" ]
-            then
-                progress ""
-            else
-
-                if [ -f /tmp/.startsize.io ]
-                then
-                     . /tmp/.startsize.io
-                    #finding the drive
-                    ddrive=`df |  grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
-                    used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
-                    used=`echo $used-$STARTSIZE|bc`
-                        #echo $used
-                fi
-
-        if [ ! x$used = x ]
-            then
-                .  /root/.install_size
-                #somehow find if it's an install or update
-                if [ -f /tmp/.this_is_upgrade ]
-                then
-                    total=$UPGRADESIZE
-                else
-                    total=$TOTALSIZE
-                fi
-            percent=`echo "scale=2 ;  ($used/$total) * 100 " |bc `
-            cond2=$(echo "$percent > 100" |bc  )
-            if [ $cond2 -eq 1  ]
-            then
-            percent=100
-            fi
-            cond3=$(echo "$percent < 3" |bc )
-            if [ $cond3 -eq 0   ]
-                then
-                    progress $percent
-                fi
-            fi
-        fi
-        ;;
-esac
-
-
-
diff --git a/abs/core/live-installer/issue b/abs/core/live-installer/issue
deleted file mode 100644
index 3c01679..0000000
--- a/abs/core/live-installer/issue
+++ /dev/null
@@ -1 +0,0 @@
-LinHes
\ No newline at end of file
diff --git a/abs/core/live-installer/live-install.sh b/abs/core/live-installer/live-install.sh
deleted file mode 100755
index 573bb1f..0000000
--- a/abs/core/live-installer/live-install.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-#redirect stderr to stdout, then rediret stdout to file
-. /etc/profile
-exec 2>&1
-exec > /tmp/mythvantage_install.log
-. /etc/X11/STBWINDOWMANAGER
-/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
-keylaunch &
-/usr/bin/tilda &
-/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents  &
-export MALLOC_CHECK_=0
-if [ -f /opt/vmware/bin32/vmware-user-wrapper ]
-then
-	/opt/vmware/bin32/vmware-user-wrapper &
-fi
-xhost +
-CMDLINE=$(cat /proc/cmdline)
-echo $CMDLINE |grep -q nfsroot
-NFSROOT=$?
-if  [ x$NFSROOT = x1  ]
-then
-
-    unbuffer MythVantage &
-else
-    NETBOOT=YES     MythVantage &
-fi
-
-exec  $STBWINDOWMANAGER
diff --git a/abs/core/live-installer/live.install b/abs/core/live-installer/live.install
deleted file mode 100644
index a0a9d31..0000000
--- a/abs/core/live-installer/live.install
+++ /dev/null
@@ -1,78 +0,0 @@
-# This is a default template for a post-install scriptlet.  You can
-# remove any functions you don't need (and this header).
-
-# arg 1:  the new package version
-pre_install() {
-  rm -f /etc/issue
-  rm -f /etc/arch-release
-
-}
-
-# arg 1:  the new package version
-post_install() {
-    if [ ! -f /etc/blacklist.package ]
-    then
-        echo "List of packages to ignore" > /etc/blacklist.package
-        echo "one package per line" >> /etc/blacklist.package
-    fi
-
-LINE="mythtv    ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage"
-LINE1="mythtv   ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage"
-for i in "$LINE"  "$LINE1"
-do
-        cp /etc/sudoers /etc/sudoers.bak
-        grep -q "$i" /etc/sudoers
-        if [ $? != 0 ]
-        then
-                echo  "$i" >> /etc/sudoers
-                visudo -cf /etc/sudoers
-                if [ ! $? = 0 ]
-                then
-                        cp /etc/sudoers.bak /etc/sudoers
-			echo $i
-                        echo "Error adding files"
-                        exit 1
-                fi
-        fi
-done
-
-
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-pre_upgrade() {
-  /bin/true
-}
-
-# arg 1:  the new package version
-# arg 2:  the old package version
-post_upgrade() {
-	. /etc/profile
-	ps -ef|grep mysqld|grep -v grep
-	status=$?
-	echo "status $status"
-	if [ $status  = 0 ]
-	then
- 		restore_default_settings.sh -c load
-	fi
-        if [ ! -f /etc/blacklist.package ]
-        then
-            echo "List of packages to ignore" > /etc/blacklist.package
-            echo  "one package per line" >> /etc/blacklist.package
-        fi
-}
-
-# arg 1:  the old package version
-pre_remove() {
-  /bin/true
-}
-
-# arg 1:  the old package version
-post_remove() {
-  /bin/true
-}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core/live-installer/networkconfig.sh b/abs/core/live-installer/networkconfig.sh
deleted file mode 100644
index 61a7405..0000000
--- a/abs/core/live-installer/networkconfig.sh
+++ /dev/null
@@ -1,280 +0,0 @@
-#!/bin/bash
-#. /etc/profile
-#. /etc/systemconfig
-#BASE=/tmp
-ETCNETDIR=$BASE/etc/net/ifaces
-
-
-
-function kill_dhcp () 
-{
-for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid
-do
-    if [ -f ${i} ]
-    then
-        pid=`cat ${i}`
-        kill -9 $pid
-        rm -f ${i}
-    fi
-    if [ x$1 = xflush ]
-    then
-        for ifdev in eth0 wlan0 eth1 wlan1
-        do 
-           echo ${i} |grep $ifdev
-           status=$?
-           if [ $status = 1 ]
-           then
-             ip address flush $ifdev   
-           fi
-        done
-    fi
-
-done
-
-}
-
-function setup_nameserver(){
-grep -q $1 ${BASE}/etc/resolv.conf
-status=$?
-if [ ! $status = 0 ]
-then
-    echo "nameserver $1" >> ${BASE}/etc/resolv.conf
-fi
-
-}
-
-function setup_interfaces() {
-  local IS_WIRELESS
-  local ip
-  local netmask
-  local isactive
-  local dns
-  local UseDHCP
-  local GW
-  local ESSID
-  local KEY
-  local ENCRYPT
-  local TEMPNET
-  IS_WIRELESS=false
-
-  #local ip
-  TEMPNET="Hostip"$1
-  echo $TEMPNET
-  eval ip=\$${TEMPNET}
-
-  TEMPNET=Hostnetmask$1
-  eval netmask=\$${TEMPNET}
-  netmask=`echo "$netmask" | cut -d " " -f1`
-  
-  TEMPNET=HostActive$1
-  eval isactive=\$${TEMPNET}
-
-  TEMPNET=HostDNS$1
-  eval dns=\$${TEMPNET}
-
-  TEMPNET="HostUSEDHCP"$1
-  eval UseDHCP=\$${TEMPNET}
-
-  TEMPNET=HostGW$1
-  eval GW=\$${TEMPNET}
-
-
-
-  if [ $1 = wlan0 -o  $1 = wlan1 ]
-  then
-    IS_WIRELESS=TRUE
-    TEMPNET=HostESSID$1
-    eval ESSID=\$${TEMPNET}
-    
-    TEMPNET="HostKey"$1
-    eval KEY=\$${TEMPNET}
-    
-    TEMPNET=HostUseEncryption$1
-    eval ENCRYPT=\$${TEMPNET}
-  fi
-  
-
-  echo "Setup $1 in progress, wireless: $IS_WIRELESS"
-    
-    if [ ! -d $ETCNETDIR/$1 ]
-    then
-        mkdir -p $ETCNETDIR/$1
-    fi
-
-    if  [ ! -f  $ETCNETDIR/$1/options ]
-    then
-        cp -f  $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options
-    fi
-
-    if [ x$isactive =  x0 ]
-    then
-            echo "setting $1 to inactive"
-            sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options
-            
-    else
-            echo "setting $1 to active"
-            sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options
-    fi
-
-    if [ x$IS_WIRELESS =  xTRUE ]
-    then
-            echo "setting $1 wireless"
-            sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options
-            #set the key and essid
-            echo "essid  $ESSID" > $ETCNETDIR/$1/iwconfig
-            if  [ x$ENCRYPT = x1 ]
-            then
-                echo "key $KEY" >>  $ETCNETDIR/$1/iwconfig
-            fi
-            
-    else
-            echo "disabling wireless"
-            sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options
-    fi
-
-
-
-
-    if [ $UseDHCP = 0 ]
-    then
-            echo using dhcp
-            sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options
-            
-    else
-        echo "using static ip"
-        sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options
-        echo "default via $GW" > $ETCNETDIR/$1/ipv4route
-        echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address
-        setup_nameserver $dns
-    fi
-}
-
-
-function find_active () {
-#HostActiveeth1="1"
-rm -f ${BASE}/etc/resolv.conf
-if [ x$MYTHDHCP =  x1 ]
-           then
-            #add 127.0.0.1 to /etc/resolv.conf
-                 echo "search lan" > ${BASE}/etc/resolv.conf
-                 echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
- fi
-
-for i in eth0 eth1 wlan0 wlan1 
-do
-    CURRENTIF="HostActive"$i
-    eval IFSTATE=\$${CURRENTIF}
-    if [ x$IFSTATE = x1 ]
-    then
-        setup_interfaces $i
-    fi
-done
-}
-
-function setup_hostname {
-#set the hostname
-if [ !  x$hostname = x ]
-then
-    echo $hostname > ${BASE}/etc/hostname
-    cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname  > /tmp/hosts
-    #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts
-
-    if [ x$MYTHDHCP =  x1 ]
-    then
-        echo "127.0.0.1  localhost " >  ${BASE}/etc/hosts
-        echo "$MYTHIP $hostname   " >>  ${BASE}/etc/hosts
-    else
-        echo "127.0.0.1 $hostname  localhost " >  ${BASE}/etc/hosts
-    fi
-    cat /tmp/hosts >> ${BASE}/etc/hosts
-fi
-
-kill_dhcp
-}
-
-function vnc_check() {
-    CMDLINE=$(cat /proc/cmdline)
-    echo $CMDLINE |grep -q vnc
-    USEVNC=$?
-    echo $CMDLINE |grep -q nfsroot
-     NETBOOT=$?
-    echo $USEVNC
-    if [ !  x$USEVNC = x0  ]
-    then
-        echo "not using vnc"
-        if [ !  x$NETBOOT = x0  ]
-        then
-            echo "not using netboot"
-        else
-            echo "using netboot"
-            USEVNC=0
-        fi
-
-    else
-        echo " using vnc"
-    fi
-}
-
-function setup_MYTH_vars {
-    TEMPMYTH="Hostip"$default_interface
-    #echo $TEMPMYTH
-    eval MYTHIP=\$${TEMPMYTH}
-    
-    TEMPMYTH="HostUSEDHCP"$default_interface
-    eval MYTHDHCP=\$${TEMPMYTH}
-
-    
-
-}
-
-
-
-function setup_network {
-    setup_MYTH_vars
-    setup_hostname
-    find_active
-}
-
-function start_network {
-if [ ! $USEVNC = 0 ]
-then
-    /etc/net/scripts/network.init restart
-
-else
-    echo "VNC/NETBOOT in use, will NOT restart network"
-fi
-
-}
-
-function stop_network {
-if [ ! $USEVNC = 0 ]
-then
-    echo "stopping the network"
-    kill_dhcp flush
-    ip address flush dev eth0 2>&1 >/dev/null
-    ip address flush dev eth1 2>&1 >/dev/null
-    ip address flush dev wlan0 2>&1 >/dev/null
-    ip address flush dev wlan1 2>&1 >/dev/null
-else
-    echo "VNC/NETBOOT in use, will NOT restart network"
-fi
-
-}
-
-
-#this is used by the install process to start the network
-function install_network_setup {
-    setup_MYTH_vars
-    setup_hostname
-    stop_network
-    find_active
-    start_network
-
-}
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/remove_service.sh b/abs/core/live-installer/remove_service.sh
deleted file mode 100755
index 6cc4b4f..0000000
--- a/abs/core/live-installer/remove_service.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/bash
-SERVICE_DIR=/var/service
-SCRIPT_DIR=/etc/sv
-if [ -e $SERVICE_DIR/$1 ]
-then
-		echo "removing"
- rm $SERVICE_DIR/$1
-fi
diff --git a/abs/core/live-installer/restore_default_settings.sh b/abs/core/live-installer/restore_default_settings.sh
deleted file mode 100755
index e2b7044..0000000
--- a/abs/core/live-installer/restore_default_settings.sh
+++ /dev/null
@@ -1,325 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. /etc/systemconfig
-shopt -s -o nounset
-echo $@ >>  /tmp/restore.out
-#TEMPLATES="/usr/share/templates/settings"
-TEMPLATES="$TEMPLATES/settings"
-TABLES="settings keybindings"
-MYTHDBUSER=mythtv
-MYTHTVPASSWD=[REDACTED]
-declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho"
-Thistemplate=""
-declare -i OVERRIDE=0
-declare -i EVERYTHING=0
-
-function CMD_DEFINE () {
-     #add override check
-    if  [ x$Thistemplate = xsyssettings  -a  $OVERRIDE  -eq 1   ]
-    then
-         MYSQLCMD="mysql  --local-infile  -s -u$MYTHDBUSER  -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
-         MYSQLCMD_C="mysql -u$MYTHDBUSER  -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
-         MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";"
-    else
-        MYSQLCMD="mysql  --local-infile  -s -u$MYTHDBUSER  -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
-        MYSQLCMD_C="mysql -u$MYTHDBUSER  -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
-        MYSQLCMD_UPDATE_HOST="select hostname from settings;"
-    fi
-}
-
-function SQL_DEFINE () {
-	#$1 is the table name
-	if [ $1 = "settings" ]
-	then
-		ALTERSQL="Alter table  temp_${1}_${hostname} add unique ( value )"
-	else
-		ALTERSQL=";"
-	fi
-
-    CREATESQL="create table  temp_${1}_${hostname} like $1;"
-	COPY_TMP_SQL="replace  into  temp_${1}_${hostname}  (select * from $1 where hostname=\"$hostname\");"
-	INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname}  FIELDS TERMINATED BY '\t';"
-    #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname}  FIELDS TERMINATED BY '\t';"
-	DROPSQL="delete  from $1 where hostname=\"$hostname\";"
-	COPY_BCK_SQL="replace  into $1   (select * from  temp_${1}_${hostname}  where hostname=\"$hostname\");"
-	DROP_TABLE="Drop table temp_${1}_${hostname}"
-}
-
-function ARG_ERR()  {
-        if [  x$OPTARG = "x" ]
-        then
-            echo "$SWITCH NEEDS AND ARG"
-            exit 11
-        fi
-}
-
-function ALSADEVICE () {
-#ALSA:hw:1,4
-    if [ x$Audiotype = xALSA ]
-    then
-        SoundDevice=ALSA:$SoundDevice
-    fi
-}
-
-
-
-if [ $# -eq 0 ]
-then
-    echo "Valid options are:"
-    echo "  -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)"
-    echo "  -t (syssettings)"
-    echo "  -d databasename"
-    echo "  -h hostname"
-    echo "  -s systemtype (master|slave|standalone|frontendonly)"
-    echo "  -a ipaddress"
-    echo "  -z zipcode"
-    echo "  -o  override (only used upgrade installs)"
-    exit 1
-fi
-
-
-
-
-while getopts "$OPTSTRING"  SWITCH
-do
-    case $SWITCH in
-        #  \?)  echo "unkown option"
-                #       exit 11 ;;
-            c)   echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    OPERATION=$OPTARG
-                    ;;
-            t) echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    Thistemplate=$OPTARG
-
-                     if  [  x$Thistemplate = x"syssettings"  ]
-                       then
-                            echo ""
-                        else
-                        echo "invalid template name"
-                        exit 1
-                    fi
-                    ;;
-            d) echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    if [ $OVERRIDE =  1 ]
-                    then
-                        ovdbhost=$OPTARG
-                    else
-                        dbhost=$OPTARG
-                    fi
-                    ;;
-            h) echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    if [ $OVERRIDE =  1 ]
-                    then
-                       oldhostname=$hostname
-                        hostname=$OPTARG
-                    else
-                        hostname=$OPTARG
-                   fi
-
-                                  ;;
-            s) echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    SYSTEMTYPE=$OPTARG
-                        ;;
-            a) echo "$SWITCH"  "$OPTARG"
-                    ARG_ERR
-                    IP_ADDRESS=$OPTARG
-                    ;;
-            z) echo "$SWITCH"  "$OPTARG"
-                   ARG_ERR
-                   ZIPCODE=$OPTARG
-                    ;;
-           o)  OVERRIDE=1
-                 ;;
-
-            esac
-done
-
-echo $OVERRIDE
-
-#setup the Mysql commands
-CMD_DEFINE
-
-$MYSQLCMD_C "show tables" > /dev/null
-status=$?
-if [ $status = 1 ]
-then
-    echo "$@ failed"
-    echo "$@ failed" >> /tmp/restore.out
-    exit 1
-fi
-
-
-
-
-
-
-
-case $OPERATION in
-
-	restore)
-		#used to restore settings from syssettings
-		if  [ -d $TEMPLATES/$Thistemplate ]
-		then
-		cd $TEMPLATES/$Thistemplate
-			for i in $TABLES
-			do
-	    			SQL_DEFINE $i
-    			sed -e "s/REPLACEME/$hostname/g"  $i.txt  > /tmp/$i.txt
-   				#echo    $MYSQLCMD "$SELECTSQL"
-   				echo $i
-     		    $MYSQLCMD "$CREATESQL"
-  				$MYSQLCMD "$ALTERSQL"
-  				$MYSQLCMD "$COPY_TMP_SQL"
-   				$MYSQLCMD "$INSERTSQL"
-    			$MYSQLCMD "$DROPSQL"
-    			$MYSQLCMD "$COPY_BCK_SQL "
-   				$MYSQLCMD "$DROP_TABLE "
-   				#rm /tmp/$i.txt
-			done
-		else
-		 echo "couldn't find $TEMPLATES/$Thistemplate"
-		fi
-	;;
-
-	save)
-
-                if [ ! -d $TEMPLATES/$Thistemplate ]
-                then
-                    mkdir -p $TEMPLATES/$Thistemplate
-                fi
-
-                cd $TEMPLATES/$Thistemplate
-        		for i in $TABLES
-		        do
-                     EXTRACLAUSE=""
-                    case $i in
-                    settings)
-                        EXTRACLAUSE="and  not (value like \"BackendServerIP\") and not (value like \"locale\")  order by value"
-                       	SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE"  ;"
-                    #    SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE"  ;"
-             	        $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
-                           ;;
-                      keybindings)
-                                SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\"  "$EXTRACLAUSE"  ;"
-                                $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
-                            ;;
-                    esac
-	                  #  sed -e "s/$hostname/REPLACEME/g"  $i  > $i.txt && rm $i
-
-                done
-		;;
-
-    load)
-
-                #will load both default_1 and default_2  unless either file is not found
-                for i in default_1 default_2
-                do
-                    if [ -f $TEMPLATES/$i/settings.txt   ]
-                    then
-                           echo $i
-                          for tablename in $TABLES
-                            do
-                         #create table
-                            CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;"
-                            $MYSQLCMD_C "$CREATESQL"
-                         #truncate table
-                            TRUNCATESQL="truncate ${tablename}_${i}  "
-                            $MYSQLCMD_C "$TRUNCATESQL"
-                         #load table
-                              INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i}   FIELDS TERMINATED BY '\t';"
-                                $MYSQLCMD_C "$INSERTSQL"
-                         #update_hostname
-                              UPDATEHOSTNAMESQL="update  ${tablename}_${i}  set hostname='$i'  ; "
-                                $MYSQLCMD_C "$UPDATEHOSTNAMESQL"
-                           done
-                    else
-
-                        echo "couldn't find $TEMPLATES/$i/settings.txt  template to load"
-                    fi
-                    CREATESQL="create table IF NOT EXISTS settings_user1  like settings;"
-                    $MYSQLCMD_C "$CREATESQL"
-                    CREATESQL="create table IF NOT EXISTS settings_user2  like settings;"
-                    $MYSQLCMD_C "$CREATESQL"
-                    CREATESQL="create table IF NOT EXISTS settings_user3  like settings;"
-                    $MYSQLCMD_C "$CREATESQL"
-
-                    CREATESQL="create table IF NOT EXISTS keybindings_user1  like keybindings;"
-                    $MYSQLCMD_C "$CREATESQL"
-                    CREATESQL="create table IF NOT EXISTS keybindings_user2  like keybindings;"
-                    $MYSQLCMD_C "$CREATESQL"
-                    CREATESQL="create table IF NOT EXISTS keybindings_user3  like keybindings;"
-                    $MYSQLCMD_C "$CREATESQL"
-                done
-;;
-
-
-
-        BECONFIG)
-                if [ $SYSTEMTYPE = "master" ]
-                then
-                        $MYSQLCMD_C "UPDATE settings  set data='${IP_ADDRESS}' where value='MasterServerIP';"
-                        $MYSQLCMD_C "delete  from   settings    where value='BackendServerIP'  and  hostname=\"$hostname\";"
-                        $MYSQLCMD_C "REPLACE INTO settings set  data='${IP_ADDRESS}' , value='BackendServerIP' ,  hostname=\"$hostname\";"
-                fi
-
-                if [ $SYSTEMTYPE = "slave" ]
-                then
-                        $MYSQLCMD_C "delete  from   settings    where value='BackendServerIP'  and  hostname=\"$hostname\";"
-	    		        $MYSQLCMD_C "REPLACE INTO settings  set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";"
-                fi
-                ;;
-        ZIP)
-               $MYSQLCMD_C "delete from settings where  value='locale' and  hostname=\"$hostname\";"
-               $MYSQLCMD_C "REPLACE INTO  settings set data='$ZIPCODE'  ,  value='locale' , hostname=\"$hostname\";"
-               $MYSQLCMD_C "delete from settings where  value='MythMovies.ZipCode' and  hostname=\"$hostname\";"
-               $MYSQLCMD_C "REPLACE INTO  settings set data='$ZIPCODE',  value='MythMovies.ZipCode' , hostname=\"$hostname\";"
-                ;;
-        MUSICFRONT)
-                ALSADEVICE
-                $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";"
-                $MYSQLCMD_C "REPLACE INTO  settings set data='$SoundDevice',  value='AudioOutputDevice' , hostname=\"$hostname\";"
-                #need to reload the settings.
-                systemconfig.sh reloadfe
-                ;;
-        MUSICMYTH)
-            ALSADEVICE
-            $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";"
-            $MYSQLCMD_C "REPLACE INTO  settings set data='$SoundDevice',  value='MusicAudioDevice' , hostname=\"$hostname\";"
-                ;;
-         uhostname)
-                    #used when the hostname is changed.
-                    TABLES="settings capturecard keybindings storagegroup recorded"
-                    for i in $TABLES
-                    do
-                        USQL="update $i set hostname=\"$oldhostname\"  where hostname=\"$hostname\"  ;"
-                        $MYSQLCMD_C "$USQL"
-                    done
-
-                ;;
-        USERJOBALLOW)
-                SQL="update settings set data='1' where value like  'JobAllowUserJob%' and hostname=\"$hostname\"  ;"
-                $MYSQLCMD_C "$SQL"
-                ;;
-
-        ACCESSCONTROL)
-                LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound"
-
-                for i in $LIST
-                do
-                    $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";"
-                    $MYSQLCMD_C "REPLACE INTO  settings set data='1',  value=\"$i\" , hostname=\"$hostname\";"
-                done
-                SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\"  ;"
-                $MYSQLCMD_C "$SQL"
-	esac
-
-#SELECT * INTO OUTFILE 'data.txt'
-# FIELDS TERMINATED BY ','
-# FROM table2;
-
-
diff --git a/abs/core/live-installer/soundconfig.sh b/abs/core/live-installer/soundconfig.sh
deleted file mode 100755
index 1adb447..0000000
--- a/abs/core/live-installer/soundconfig.sh
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/bash
-. /etc/systemconfig
-. /etc/profile
-echo $@ >/tmp/audio.call
-#set -x
-BASE=""
-. /etc/profile
-#TEMPLATES="/usr/share/templates"
-TESTFILE="$TEMPLATES/audio/space_battle_A.wav"
-OSSinstalled="false"
-
-function testaudio () {
-
-ossplay  -d$AUDIODEVICE $TESTFILE
-
-}
-
-function load_alsa() {
-
-    remove_service.sh alsa-utils
-#    cd /lib/modules/2.6.21-STB
-    KER=`uname -r`
-    cd /lib/modules/$KER/kernel/
-    tar -xvf alsa-$KER.tar
-    pacman -Sf --noconfirm  alsa-lib
-
-    depmod -a
-    cd -
-    udevsettle
-    udevsettle
-    udevtrigger
-
-    add_service.sh alsa-utils
-    sleep 4
-    sv start alsa-utils
-}
-
-
-function unload_alsa () {
-#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
-    sv stop alsa-utils
-    remove_service.sh alsa-utils
-    rm -rf /dev/adsp*
-    rm -rf /dev/snd/*
-    rm -rf /dev/audio
-    modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
-}
-
-function unload_oss {
-    sv stop oss
-    soundoff
-    rm -rf /dev/dsp*
-    rm -rf /dev/oss*
-    rm -rf /dev/sndstat
-    remove_service.sh oss
-}
-
-function installOSS {
-    echo "installing oss"
-    add_service.sh oss
-    sleep 4
-    sv start oss
-}
-
-
-function SYNCXINE {
-echo "modify xine config file"
-    if [ -f /data/home/mythtv/.xine/config ]
-    then
-        cp -f /data/home/mythtv/.xine/config  $TEMPLATES/xine.config
-    else
-        cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config
-    fi
-
-    if [ x$Audiotype = xOSS ]
-    then
-       DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3  } '|tr -d dsp `
-        sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \
-               -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \
-               -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \
-               -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \
-                $TEMPLATES/xine.config > /data/home/mythtv/.xine/config
-    else
-        cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config
-    fi
-
-}
-
-function SYNCMPLAYER {
-echo "modify mplayer not implmented yet"
-}
-
-function SYNCMYTHMUSIC {
-echo "sync mythmusic"
-$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH
-}
-
-function SYNCMYTHFRONTEND {
-echo "sync mythfrontend"
-$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT
-}
-
-
-function checkOSSinstalled () {
- ossinfo 1>/dev/null
- resultcode=$?
- echo $resultcode
- if [ $resultcode = 0 ]
- then
-    OSSinstalled='true'
- else
-    OSSinstalled='false'
- fi
-}
-
-function sound_config_system {
-
-    if [ x$syncXine = x1 ]
-    then
-          SYNCXINE
-    fi
-    if [ x$syncMplayer = x1 ]
-    then
-          SYNCMPLAYER
-    fi
-    if [ x$syncMythMusic = x1 ]
-    then
-          SYNCMYTHMUSIC
-    fi
-    if [ x$syncMythFrontend = x1 ]
-    then
-          SYNCMYTHFRONTEND
-    fi
-
-}
-
-function loadsound (){
-        checkOSSinstalled
-        if [  x$AUDIOTYPE = xOSS  -o   x$AUDIOTYPE = xoss ]
-        #then
-        #    if [ $OSSinstalled = "false" ]
-            then
-                while [ $OSSinstalled = "false" ]
-                do
-                    unload_alsa
-                    rm /tmp/.alsatest
-                    installOSS
-                    installOSS
-                    sleep 2
-                    checkOSSinstalled
-                done
-          #  fi
-        else
-            touch /tmp/.alsatest
-            unload_oss
-            load_alsa
-            load_alsa
-            rm /tmp/.alsatest
-
-        fi
-
-}
-
-
-
-
-#####################MAIN PROGRAM##########################
-
-declare -r OPTSTRING="i:t:d:"
-
-if [ $# -eq 0 ]
-then
-    echo "Valid options are:"
-    echo "  -i  (oss|alsa)   oss or alsa subsystem  "
-    echo "  -t  (test|real|LOAD)   "
-    echo "  -d device"
-    exit 1
-fi
-
-
-
-
-while getopts "$OPTSTRING"  SWITCH
-do
-    case $SWITCH in
-          \?)  echo "unkown option"
-                      exit 11 ;;
-            i)   echo "$SWITCH"  "$OPTARG"
-                    AUDIOTYPE="$OPTARG"
-                    ;;
-            d) echo "$SWITCH"  "$OPTARG"
-                    AUDIODEVICE=$OPTARG
-                    ;;
-            t) echo "$SWITCH"  "$OPTARG"
-                SOUNDOPTYPE="$OPTARG"
-                if  [ x"$OPTARG" = xtest ]
-                then
-                    TEST=true
-                else
-                    TEST=false
-                fi
-
-
-                    ;;
-
-            esac
-done
-
-
-
-
-case $SOUNDOPTYPE in
-    REAL|real )
-                    loadsound
-                    sound_config_system
-        ;;
-    test|TEST)
-                echo $@ > /tmp/audio.test
-                #loadsound
-                 if [  x$AUDIOTYPE = xOSS  -o   x$AUDIOTYPE = xoss ]
-                then
-                    echo "testing OSS  $AUDIODEVICE "
-                    ossplay  -d$AUDIODEVICE $TESTFILE
-                else
-                    echo "testing ALSA $AUDIODEVICE "
-                    aplay --device=$AUDIODEVICE $TESTFILE
-                fi
-
-        ;;
-
-    LOAD|load)
-                        loadsound
-        ;;
-    esac
-
-
-exit 0
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/startx b/abs/core/live-installer/startx
deleted file mode 100755
index 0ffdf8c..0000000
--- a/abs/core/live-installer/startx
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-. /etc/profile
-
-export USER=root
-export HOME=/root
-#TEMPLATES=/usr/share/templates
-
-CMDLINE=$(cat /proc/cmdline)
-TEMPVAR=${CMDLINE#*ip=}
-IP=${TEMPVAR%% *}
-echo $CMDLINE |grep -q vnc
-USEVNC=$?
-
-if [ x$USEVNC = x1 ]
-then
-	$MV_ROOT/bin/xconfig.sh
-	cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
-	startx /root/live-install.sh --  -config /root/xorg.conf.install -allowMouseOpenFail
- else
- #VNC
-     pacman -Sf --noconfirm tightvnc
-    cd /root
-    mkdir .vnc
-    echo mythvantage |vncpasswd -f > /root/.vnc/passwd
-    chmod 500 /root/.vnc/passwd
-    rm /root/.vnc/xstartup
-    ln -s /root/live-install.sh /root/.vnc/xstartup
-    vncserver
-fi
diff --git a/abs/core/live-installer/systemconfig.sh b/abs/core/live-installer/systemconfig.sh
deleted file mode 100755
index 909119e..0000000
--- a/abs/core/live-installer/systemconfig.sh
+++ /dev/null
@@ -1,1255 +0,0 @@
-#!/bin/bash
-###################################################################
-#Script to configure your system based off the values in /etc/systemconfig
-#Any changes made to config files will be removed when systemconfig.sh is run
-#
-#JM
-###################################################################
-#set -x
-. /etc/profile
-MVRELEASE=`cat /etc/mythvantage-release  |cut -d" " -f -2`
-
-echo $@ >/tmp/systemconfig.call
-echo "----------------------start of systemconfig $@ ----------------------"
-BASE=""
-
-#TEMPLATES="/usr/share/templates"
-. /etc/profile
-. $MV_ROOT/bin/networkconfig.sh
-PACMAN="pacman --noconfirm"
-postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype`
-PKGBLACKLIST=$BASE/etc/blacklist.package
-
-if [ x$1 = x"Mysql_only" ]
-    then
-	rm -f /tmp/mysql.txt
-        sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt
-        exit 0
-    fi
-
-
-if [ -f /etc/systemconfig ]
-then
-	. /etc/systemconfig
-TEMPNET="Hostip"$default_interface
-echo $TEMPNET
-eval MYTHIP=\$${TEMPNET}
-else
-	echo "could not find /etc/systemconfig"
-	exit 1
-fi
-
-
-
-#-----------------------------------------------------
-
-
-function setupmysql  {
-#setup mysql.txt to find the database servers
-        if [ $SystemType = "Master_backend" ]
-        then
-            if [ $MYTHDHCP = 0 ]
-            then
-                #this grabs eth0, as that is all thats supported.
-#                dbhost=`ifconfig  | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-                dbhost=`ifconfig  | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
-                sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
-                cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
-                ##logic to change master_serverip and backend_serverip  in db
-                ${BASE}${MV_ROOT}/bin/restore_default_settings.sh  -c BECONFIG -s master -a $dbhost
-            else
-
-                dbhost=$MYTHIP
-                sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
-                cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
-                #logic to change dbhost in db
-                ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
-            fi
-        fi
-
-        if [ $SystemType = "Slave_backend" ]
-        then
-            if [ $MYTHDHCP = 0 ]
-            then
-                #this grabs eth0, as that is all thats supported.
-                #slavehost=`ifconfig  | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-                slavehost=`ifconfig  | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
-                ##logic to change backend_serverip in db
-                ${BASE}${MV_ROOT}/bin/restore_default_settings.sh  -c BECONFIG -s slave  -a $slavehost
-            else
-                slavehost=$MYTHIP
-
-                #logic to change backend_serverif in db
-                ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave  -a $slavehost
-            fi
-        fi
-
-        MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt
-        if [ $SystemType = "Standalone" ]
-        then
-            sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT
-        else
-            sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT
-        fi
-        rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt
-        rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt
-        if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ]
-        then
-            cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT
-        fi
-
-        chmod 755 $MYSQLTXT
-        chown mythtv $MYSQLTXT
-
-}
-
-function setupmysqlnetwork(){
-MFILE=etc/my.cnf
-grep "#skip-networking" $BASE/$MFILE
-status=$?
-
-
-
-    if [ $SystemType = "Standalone" ]
-         then
-            sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE
-            if [ $status = 0 ]
-            then
-                sudo sv restart mysql
-	        echo "restarting mysql with   no network"
-            fi
-
-        fi
-
-    if [ $SystemType = "Master_backend" ]
-    then
-          sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE
-            if [ $status = 1 ]
-            then
-                sudo sv restart mysql
-		        echo "restarting mysql with  network"
-            fi
-
-    fi
-
-
-}
-
-
-function settimezone {
-#set the timezone
-if [  x"$timezone" = x ]
-then
-    timezone="unknown"
-fi
-rm ${BASE}/etc/localtime
-echo $timezone
-ln -s "/usr/share/zoneinfo/$timezone"  ${BASE}/etc/localtime
-        sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf
-
-       # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock
-       # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock
-       # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock
-cp $TEMPLATES/rc.conf /etc/rc.conf
-
-}
-
-
-function setupreceiver {
-   case $ReceiverType in
-    tinker) echo "do nothing"
-            ;;
-    Serial) echo "setup serial lirc"
-            sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
-            echo "lirc_serial   #lirc" >> ${BASE}/etc/modules.mythvantage
-            /usr/bin/load-modules-mythvantage.sh
-            ;;
-    Usb-imon) echo "setup receiver-usb-imon"
-              sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
-              echo "lirc_imon     #lirc" >> ${BASE}/etc/modules.mythvantage
-              /usr/bin/load-modules-mythvantage.sh
-              ;;
-           *)   sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
-              ;;
-    esac
-
-
-}
-
-function setupremote {
-     case $Remotetype in
-        no_remote) echo "No remote selected"
-                daemon_remove="lircd $daemon_remove"
-                ;;
-        tinker) echo "Remote in tinker mode"
-                ;;
-            *)  echo "Setup remote"
-                mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
-                cd $TEMPLATES/remotes/$Remotetype
-                for i in lircd*
-                do
-                        cat $i >> ${BASE}/etc/lircd.conf
-                done
-                cp lircrc ${BASE}/etc/lircrc
-                if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
-                then
-                    cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc
-                    cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf
-                fi
-                if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ]
-                then
-                    cat $TEMPLATES/transmit/$Blastertype/lircd.conf  >> ${BASE}/etc/lircd.conf
-                fi
-                chmod 755 /etc/lircrc
-                daemon_add="lircd $daemon_add"
-                sv hup lircd
-                ;;
-esac
-
-}
-
-function setupblaster {
-        #cd $TEMPLATES/transmit/$Blastertype
-        #for i in lircd*
-        #do
-         #       cat lircd.conf  >> ${BASE}/etc/lircd.conf
-        #done
-      #  REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '`
-         sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh
-          chmod 755 ${BASE}/usr/bin/change_chan.sh
-        #channel change script change
-        setupremote
-
-}
-
-function setupevrouter {
-    if [  x$UseEvrouter  = x1 ]
-    then
-        case x$EvrouterConfig in
-            xtinker )
-                    echo "do nothing for evrouter"
-                    ;;
-                x ) echo "empty evrouter"
-                    ;;
-                * ) echo "setup evrouter for $EvrouterConfig "
-                    cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg
-                    daemon_add="evrouter Xvfb $daemon_remove"
-
-                    ;;
-        esac
-    else
-    # disable evrouter
-    daemon_remove="evrouter Xvfb $daemon_remove"
-    fi
-
-
-
-
-}
-
-function setupLCD {
-   case x$LCDtype in
-    xtinker) echo "do nothing"
-            ;;
-    xno_lcd) echo "disabling lcd"
-            sv down lcdd
-            /usr/bin/load-modules-mythvantage.sh  UNLOAD LCD
-            sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
-            daemon_remove="lcdd $daemon_remove"
-            ;;
-        x) echo "empty lcd" ;;
-
-         *) echo "setup lcd"
-            if [ -f $TEMPLATES/LCD/$LCDtype/modules  ]
-            then
-              sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
-              cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage
-              #should also modprobe
-            fi
-
-
-            if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]
-            then
-                cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc
-               # install="lcdproc $install"
-                daemon_add="lcdd $daemon_add"
-                /usr/bin/load-modules-mythvantage.sh
-                RESTART_FE="true"
-                RESTART_LCD="true"
-            fi
-            #check if lirc capable,if so then call setupremote
-            if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
-            then
-                setupremote
-            fi
-            ;;
-    esac
-
-}
-
-
-
-function scrubnfs {
-	   cp /etc/fstab $TEMPLATES/fstab.conf.template
-       grep -v nfs   $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab
-   }
-
-function setupfstab () {
-#    	setupfstab $NFSserver $NFSshare $NFSmount
-         echo "$1 $2  nfs" >> ${BASE}/etc/fstab
-         if [ ! -e "$2" ]
-         then
-           mkdir -p "$2"
-           chown mythtv:mythtv "$2"
-         fi
-         if [ x$DCONFIG = x  ]
-         then
-            mount $2 &
-        fi
-
-}
-
-function setupncidclient
-{
-    sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf
-}
-
-function setupnciddaemon {
-    cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template
-    sed -e "s/.*set ttyport.*$/set ttyport =  \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf
-
-}
-
-function setupntp () {
-cat > ${BASE}/etc/ntp.conf  << EOF
-# default restrictions
-restrict default noquery notrust nomodify
-# NTP drift file - used to keep track of your system clocks
-# time deviation
-driftfile /etc/ntp.drift
-
-# NTP log file
-logfile /var/log/ntp.log
-# override the default restrictions here, servers that can query
-restrict 192.168.0.0 mask 255.255.0.0 nomodify
-restrict 10.0.0.0 mask 255.0.00 nomodify
-
-#servers to sync with
-EOF
-        #this is used for backend or standlone types
-        if [ $1 = "1" ]
-                then
-                        echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf
-                        echo "server ntp3.sf-bay.org"  >> ${BASE}/etc/ntp.conf
-                        echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf
-                        echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf
-
-                else
-                        echo "server $dbhost" >> ${BASE}/etc/ntp.conf
-                        echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf
-                fi
-
-
-}
-
-function setupplugins (){
-
-pkglistinstall=""
-pkglistremove=""
-#default enabled
-for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo
-do
-eval pkgvalue=\$${i}
-
-if [ x$pkgvalue = x ]
- then
-     pkglistinstall="$pkglistinstall $i$postfix"
-     else
-     if [ x$pkgvalue = x1 ]
-     then
-         pkglistinstall="$pkglistinstall $i$postfix"
-     else
-         pkglistremove="$pkglistremove $i$postfix"
-     fi
- fi
-
-
-
-done
-
-
-
-#default disabled
- for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather
- do
-eval pkgvalue=\$${i}
-
-if [ x$pkgvalue = x ]
- then
-     pkglistremove="$pkglistremove $i$postfix"
-     else
-     if [ x$pkgvalue = x1 ]
-     then
-         pkglistinstall="$pkglistinstall $i$postfix"
-     else
-         pkglistremove="$pkglistremove $i$postfix"
-     fi
- fi
- done
-install="$pkglistinstall $install"
-remove="$pkglistremove $remove"
-
-}
-function LCDcheck () {
- case x$LCDtype in
-    xtinker) echo "do nothing lcd "
-            ;;
-    xno_lcd) echo "no  lcd "
-                       ;;
-    xxosd) install="xosd lcdproc $install"
-            ;;
-        x) echo "lcd empty "
-        ;;
- *)
-     install="lcdproc $install"
-    ;;
-esac
-}
-
-
-function packages () {
-#see which plugins need to be installed
-echo "  Starting to install Packages"
-setupplugins
-LCDcheck
-if [ ! -f $PKGBLACKLIST ]
-then
-    touch $PKGBLACKLIST
-fi
-    for i in $remove
-    do
-    echo "-----------$i --------------"
-    grep -q $i $PKGBLACKLIST
-    if [ $? = 1 ]
-    then
-        pacman -Q $i 2>/dev/null
-        #VAR=`pacman -Q $i  2>&1 `
-            if [ $? = 0 ]
-            then
-                    if [ $i = "mythweb$postfix" ]
-                    then
-                    pacman --noconfirm -R mythweb$postfix
-                    echo removed $i
-                    else
-                    pacman --noconfirm -Rs $i
-                    echo removed $i
-                    fi
-            fi
-    else
-        echo "$i is black listed"
-    fi
-    done
- # fi
-
-    for i in $install
-    do
-    echo "-----------$i --------------"
-    grep -q $i $PKGBLACKLIST
-    if [ $? = 1 ]
-    then
-            pacman -Q $i 2>/dev/null
-            #VAR=`pacman -Q $i  2>&1 `
-  #            echo $VAR |grep -vq error:
-
-            if [ ! $? = 0 ]
-            then
-                    pacman --noconfirm -Sf $i
-                    echo installed $i
-	    else
-		    echo "$i already installed"
-            fi
-    else
-      echo "$i is black listed"
-    fi
-    done
-}
-
-function daemons {
-echo "Daemons on boot"
-
-     for i in $daemon_remove
-     do
-    	   sv check $i 1>/dev/null
-            status=$?
-	   if [ $status -eq 0 ]
-	   then
-		sv down $i
-	   fi
-	        remove_service.sh $i
-     done
-
-
-    for i in $daemon_add
-    do
-        sv check $i 1>/dev/null
-        status=$?
-        add_service.sh $i
-
-		if [ $status -eq 0 ]
-		then
-                    case $i in
-                        mysql*) sv hup $i
-                                        ;;
-                        mythback*) sv hup $i
-                                        ;;
-                        lirc* ) sv hup $i
-                                        ;;
-                        frontend) sv check frontend 1>/dev/null
-                                        ;;
-
-                        smbd ) sv hup $i
-                                        ;;
-                        nmbd ) sv hup $i
-                                        ;;
-                        evrouter) sv restart $i
-                                    ;;
-                    *)     sv down $i
-                            sleep 1
-                            sv up $i
-                        ;;
-	           esac
-                 fi
-
-        done
-
-}
-
-
-function services
-{
-ser_install=""
-ser_daemon_add=""
-ser_remove=""
-ser_daemon_remove=""
-if [ x$UseEvrouter = x1 ]
-then
-    ser_daemon_add="evrouter Xvfb $ser_daemon_add"
-else
-    ser_daemon_remove="evrouter Xvfb $ser_remove"
-fi
-
-if [ x$RunDHCP = x1 ]
-then
-           ser_daemon_add="dnsmasq  $ser_daemon_add"
-           ser_install="dnsmasq mvpmc  $ser_install"
-
-else
-           ser_daemon_remove="dnsmasq  $ser_daemon_remove"
-           ser_remove="dnsmasq mvpmc  $ser_remove"
-fi
-
-if [ x$RunFrontend = x1 ]
-then
-           ser_daemon_add="frontend hal   $ser_daemon_add"
-           ser_install=" $ser_install"
-           showX=true
- else
-           ser_daemon_remove="frontend hal  $ser_daemon_remove"
-           ser_remove="$ser_remove"
- fi
-
-if [ x$UseMythWEB = x1 ]
-then
-            ser_install="lighttpd  mythweb$postfix $ser_install"
-            ser_daemon_add="lighttpd $ser_daemon_add"
- else
-           ser_remove="mythweb$postfix $ser_remove"
-           ser_daemon_remove="$ser_daemon_remove"
- fi
-
-#samba
-if [ x$UseSamba = x1 ]
-then
-        ser_install="samba $ser_install"
-        ser_daemon_add="nmbd smbd $ser_daemon_add "
-        if [ x$Samba_mediareadonly = x1 ]
-            then
-                smreadonly="no"
-                else
-                smreadonly="yes"
-        fi
-
-        if [ x$Samba_homereadonly = x1 ]
-            then
-                shreadonly="no"
-                else
-                shreadonly="yes"
-        fi
-
-        if [ ! -d ${BASE}/etc/samba ]
-        then
-            mkdir ${BASE}/etc/samba
-        fi
-
-        if [  -f ${BASE}/data/home/mythtv/templates/smb.conf  ]
-        then
-            install -D -m755  ${BASE}/data/home/mythtv/templates/smb.conf   ${BASE}/etc/samba/smb.conf
-        else
-            sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \
-                -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf
-
-            if [ x$Samba_media = "x1" ]
-            then
-                echo "include =  /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf
-                sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media
-            fi
-
-            if [ x$Samba_home = "x1" ]
-            then
-                echo "include =  /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf
-                sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home
-
-            fi
-
-        fi
-else
-        ser_remove="samba $ser_remove"
-        ser_install="smbclient $ser_install"
-        ser_daemon_remove="smbd nmbd  $ser_daemon_remove"
-fi
-
-
-if [ x$UseNFS = x1 ]
-then
-      ser_install="nfs-utils portmap $ser_install"
-      ser_daemon_add="nfsd nfslock portmap $ser_daemon_add"
-       sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports
-
-else
-      ser_remove="$ser_remove"
-      ser_daemon_remove="nfsd nfslock  $ser_daemon_remove"
-fi
-
-if [ x$Runncidd = x1 ]
-then
-           ser_daemon_add="ncidd ncid $ser_daemon_add"
-           ser_install="ncid $ser_install"
-  else
-           ser_daemon_remove="ncidd ncid $ser_daemon_remove"
-           ser_remove="ncid $ser_remove"
- fi
-
-#Setting the default, just to avoid the or statement..
-if [ x$UseHobbit = x ]
-then
-    UseHobbit=0
-fi
-
-if [ x$UseHobbit = x1 ]
-then
-    case $SystemType in
-        Standalone|Master_backend )
-           ser_daemon_add="hobbit $ser_daemon_add"
-           ser_install="hobbitserver $ser_install"
-        ;;
-
-        *)   ser_daemon_add="hobbit-client $ser_daemon_add"
-              ser_install="hobbit-client $ser_install"
-        ;;
-        esac
-else
-           ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove"
-           ser_remove="hobbit-client hobbitserver $ser_remove"
-            rm -f /data/srv/httpd/htdocs/hobbit/index.html
-
- fi
-
-
-
-}
-
-
-
-function setupsleep {
-if [ x$AutoShutdown = x1  ]
-then
-    cronshutdowntime=""
-    if  [ x$Shutdowntime != x-1 ]
-    then
-        cronshutdowntime=$Shutdowntime
-    fi
-    if [ x$Shutdowntime2 != x-1 ]
-    then
-        if [ x$cronshutdowntime = x ]
-        then
-            cronshutdowntime=$Shutdowntime2
-        else
-            cronshutdowntime="${cronshutdowntime},${Shutdowntime2}"
-        fi
-    fi
-
-    sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv
-else
-    sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv
-fi
-
-}
-
-
-function setuppacman () {
-#setup link to httpd dir
-echo "Configuring pacman"
-  if [ ! x$1 = x ]
-    then
-        ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo
-        echo "creating the link for the pacman repo mirror"
-    fi
-
-    for i in mv-core mv-core-testing mv-extra mv-extra-testing
-    do
-        echo "[$i]"  > ${BASE}/etc/pacman.d/$i
-        #add mirror if needed
-        if [ x$PKG_MIRROR = x1 ]
-        then
-            echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i
-        fi
-        #add user templates
-        USERTEMPLATES="/data/home/mythtv/templates"
-        if [ -f $USERTEMPLATES/sources/$i ]
-        then
-             echo "Adding user  $i"
-            cat $USERTEMPLATES/sources/$i  >> ${BASE}/etc/pacman.d/$i
-        fi
-        cat $TEMPLATES/sources/$i  >> ${BASE}/etc/pacman.d/$i
-        echo "setting local mirror to $dbhost for $i "
-    done
-
-     #sed -e "s/REPLACEME/$dbhost/g"  $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg
-
-
-}
-
-
-function setupzipcode () {
-    if [ ! x$zipcode = x ]
-    then
-        ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP  -z $zipcode
-    fi
-}
-
-function process_nfsmap () {
-#first look for a local copy of nfsmap
-if [ $1 = noip ]
-then
-    if [ -f /data/home/mythtv/templates/nfsmap ]
-    then
-        NFSMAP="/data/home/mythtv/templates/nfsmap"
-    else
-        mv -f /tmp/nfsmap /tmp/nfsmap.old
-        wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap
-        if [ $? = 0 ]
-        then
-            NFSMAP="/tmp/nfsmap"
-        fi
-    fi
-else
-        mv -f /tmp/nfsmap /tmp/nfsmap.old
-        wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap
-        if [ $? = 0 ]
-        then
-            NFSMAP="/tmp/nfsmap"
-        fi
-fi
-
-    if [ -f $NFSMAP ]
-    then
-        #read in file
-        while read line
-        do
-            NFSserver=`echo "$line"|cut -d" " -f1`
-            NFSmount=`echo "$line"|cut  -d" " -f2`
-            setupfstab $NFSserver $NFSmount
-        done <$NFSMAP
-    else
-        echo "couldn't find nfsmap"
-
-    fi
-}
-
-function setupcnfs () {
-     scrubnfs
-        if [ $HaveCentralNFS = "yes" ]
-	then
-            case x$NFSserver in
-                xfile:nfsmap )
-                                process_nfsmap noip
-                                ;;
-               *:nfsmap )
-                                nfsmapip=`echo "$NFSserver" | cut -d: -f1 `
-                                process_nfsmap $nfsmapip
-                                ;;
-                *)  setupfstab $NFSserver $NFSmount
-                esac
-
-	    #if [ ! x"$NFSserver" = "xfile:nfsmap" ]
-            #then
-            #    setupfstab $NFSserver $NFSmount
-            #else
-            #    process_nfsmap
-            #fi
-        else
-            echo "fe_nfs"
-            #if no central nfs found, then use the mbe.
-            if [ $SystemType = "Frontend_only" ]
-            then
-                setupfstab ${dbhost}:/data/media /data/media
-            fi
-	fi
-
-}
-
-function setupbootsplash () {
-
-if  [ x$Usebootsplash = x1 ]
-then
-    COMMAND="%s/^default.*0/default 1/g"
-else
-    COMMAND="%s/^default.*1/default 0/g"
-fi
-
-ex ${BASE}/boot/grub/menu.lst <<EOF
-:$COMMAND
-:wq
-EOF
-
-}
-
-function setuphobbitclient () {
-COMMAND="%s/^BBDISP=.*$/BBDISP=$dbhost/g"
-
-
-ex ${BASE}/data/srv/hobbit/client/etc/hobbitclient.cfg <<EOF
-:$COMMAND
-:wq
-EOF
-
-}
-
-function setupSyslog () {
-COMMAND="%s/^destination d_remote.*$/destination d_remote \{tcp\(\"${dbhost}\" port\(514\)\) \;\} \;/"
-ex ${BASE}/etc/syslog-ng.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-
-
-}
-
-function setupfuncminion () {
-COMMAND="%s/^certmaster.*$/certmaster = ${dbhost}/"
-ex ${BASE}/etc/func/minion.conf <<EOF
-:$COMMAND
-:wq
-EOF
-}
-
-function setupDNSMASQ(){
-if [ x$RunDHCP = x1   ]
-then
-    echo "DNSMASQ setup"
-
-#set default route to my GW
-COMMAND="%s/^dhcp-option=3.*$/dhcp-option=3,${route}/"
-ex ${BASE}/etc/dnsmasq.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-#setup dns to my ip
-COMMAND="%s/^dhcp-option=6.*$/dhcp-option=6,${ip}/"
-ex ${BASE}/etc/dnsmasq.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-#change nfsroot to my ip
-COMMAND="%s/nfsroot=.*:/nfsroot=${ip}:/"
-ex ${BASE}/data/srv/tftp/pxelinux.cfg/default <<EOF
-:$COMMAND
-:wq
-EOF
-
-#add 127.0.0.1 to /etc/resolv.conf
-        echo "search lan" > ${BASE}/etc/resolv.conf
-        echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
-        echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf
-fi
-
-#setup dongle.config
-COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /"
-ex ${BASE}/data/srv/tftp/dongle.bin.config <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-
-#setup dongle.config
-
-}
-
-function reloadfe(){
-   PID=`ps -ef |grep mythfrontend|grep -v grep |awk  '{print $2 }'`
-   /usr/bin/backend_control.sh  clearcache  behost $dbhost
-   if [ x$RESTART_LCD = xtrue ]
-   then
-    killall -9 mythlcdserver
-   fi
-   kill -s USR1 $PID
-
-}
-
-
-function setup_db (){
-
-            install="mysql avahli"
-            daemon_add="mysql"
-            packages
-            daemons
-status=1
-mysqlstatus=1
-while [ ! $status = 0  ]
-do
-    sv stop mysql
-    sleep 1
-    sv  start mysql
-    mysqlstatus=$?
-    if [ $mysqlstatus = 0 ]
-    then
-   	mysql -e "show databases;"
-        showstatus=$?
-        if [ $showstatus = 0 ]
-        then
-            pacman --noconfirm -R mythdb-initial
-            pacman --noconfirm  -S mythdb-initial
-            $MV_ROOT/bin/restore_default_settings.sh -c load
-            if [ $SystemType = "Master_backend" ]
-            then
-                $MV_ROOT/bin/restore_default_settings.sh  -c  BECONFIG  -s master  -a $dbhost
-            fi
-            #update database to allow user jobs on this host.
-            $MV_ROOT/bin/restore_default_settings.sh  -c  USERJOBALLOW
-            $MV_ROOT/bin/restore_default_settings.sh  -c  ACCESSCONTROL
-	   if [ -d /data/srv/mysql/mythconverg ]
-	   then
-	    pacman --noconfirm -R webcalendar
-            pacman --noconfirm --nodeps  -S webcalendar
-	    status=0
-	   fi
-   	fi
-    fi
-done
-}
-
-
-#----------------------------------------------------MAIN PROGRAM-------------------------------------------
-#misc,sleep,hostype,advanced,audio
-eval LAST=\$$#
-LIST=`echo $LAST | tr , " " `
-
-hosttypechange="false"
-
-
-for i in  $LIST
-  do
-   echo $i
-   case $i in
-	   misc) showmisc="true"
-	   	;;
-	  sleep) showsleep="true"
-		;;
-	  hostype) showhost="true"
-                      showX="true"
-	  	;;
-         hostypec) hosttypechange="true"
-                ;;
-	 advanced) showadvanced="true"
-                      #showhost="true"
-		;;
-	audio) showaudio="true"
-		;;
-	network) shownetwork="true"
-		;;
-    advancedX)  showX="true"
-      ;;
-    restartfe)  killall -9 mythfrontend
-                    killall -9 mythwelcome
-                    exit 0
-    ;;
-    reloadfe)  reloadfe
-            ;;
-
-    this_is_install) MV_NEW_INSTALL="true"
-		;;
-
-	esac
-  done
-
-if [ x$MV_NEW_INSTALL = xtrue ]
-then
-	hosttypechange="false"
-fi
-
-
-
-#  exit 1
-
-#network
-if [ x"$shownetwork" = xtrue ]
-then
-    OLDHOSTNAME=`hostname`
-    NEWHOSTNAME=$hostname
-    if [ ! $OLDHOSTNAME = $NEWHOSTNAME ]
-    then
-
-    ${MV_ROOT}/bin/restore_default_settings.sh  -cuhostname -o -h$OLDHOSTNAME
-    RESTART_FE="true"
-    hostname $NEWHOSTNAME
-    if [ $SystemType != "Frontend_only" ]
-    then
-        sv restart mythbackend
-    fi
-
-    fi
-
-    setup_network
-    CMDLINE=$(cat /proc/cmdline)
-    echo $CMDLINE |grep -q netboot
-    NETBOOT=$?
-    if [   x$NETBOOT = x1  ]
-        then
-            echo "loading network"
-            ${BASE}/etc/net/scripts/network.init reload
-        else
-            echo "netboot, will not start network"
-        fi
-fi
-
-
-if [ x$showhost = "xtrue" ]
-then
-case $SystemType in
-    Standalone)
-            setupntp 1
-            services
-            if [ x$hosttypechange = "xtrue" ]
-            then
-             setup_db
-            fi
-            if [ -f   ${BASE}/etc/avahi/services/mysql.service     ]
-            then
-                        rm -f ${BASE}/etc/avahi/services/mysql.service
-                        sudo sv restart avahi
-            fi
-
-            install="mysql mythdb-initial  avahli portmap  $ser_install"
-
-
-            remove="none $ser_remove"
-
-            daemon_add="mysql  mythbackend  avahi portmap $ser_daemon_add"
-            daemon_remove="none $ser_daemon_remove"
-
-    ;;
-   Master_backend)
-            setupntp 1
-            services
-
-            if [  !  -f   ${BASE}/etc/avahi/services/mysql.service     ]
-            then
-                        mkdir  ${BASE}/etc/avahi/services
-                        cp $TEMPLATES/mysql.service  ${BASE}/etc/avahi/services/mysql.service
-                        sudo sv restart  avahi
-            fi
-
-            install="mysql  mythdb-initial avahi portmap myth2ipod mythtv-status $ser_install  "
-            remove="$ser_remove"
-
-            daemon_add="mysql mythbackend  avahi   portmap certmaster $ser_daemon_add"
-            daemon_remove="$ser_daemon_remove"
-    ;;
-    Slave_backend)
-            setupntp 0
-            services
-            if [ x$hosttypechange = "xtrue" ]
-            then
-             setup_db
-            fi
-            if [    -f   ${BASE}/etc/avahi/services/mysql.service     ]
-            then
-                        rm -f ${BASE}/etc/avahi/services/mysql.service
-                        sudo sv restart  avahi
-            fi
-
-            #cp $TEMPLATES/mysql.service  ${BASE}/etc/avahi/services/mysql.service
-            install="mysql  avahi  $ser_install  "
-            remove=" $ser_remove"
-
-            daemon_add="mythbackend avahi portmap  $ser_daemon_add"
-            daemon_remove="$ser_daemon_remove"
-    ;;
-    Frontend_only)
-        #Add values for services
-        setupntp 0
-        services
-        if [  -f   ${BASE}/etc/avahi/services/mysql.service     ]
-            then
-                        rm -f ${BASE}/etc/avahi/services/mysql.service
-                        sudo sv restart  avahi
-            fi
-
-        install="libmysqlclient mysql-clients portmap avahi  $ser_install"
-        remove="mysql mythweb$postfix $ser_remove"
-
-        daemon_add="avahi portmap  $ser_daemon_add "
-        daemon_remove="mysql   mythbackend  $ser_daemon_remove"
-   ;;
-
-
-esac
-setupSyslog
-setupfuncminion
-fi
-
-#apply these to ALL types
-
-
-
-
-#systemtype
-
-if [ x$showhost = "xtrue" ]
-then
-    setupmysqlnetwork
-    setupmysql
-    setupremote
-    #grab the new dbhost key
-    #/usr/bin/grabkey.py
-fi
-
-#audio
-
-if [ x$showaudio = "xtrue" ]
-then
-	#setupsoundtype
-    if [ ! x$Audiotype = xtinker  ]
-    then
-        ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice
-    fi
-fi
-
-#should always run
-packages
-
-#misc
-
-if [ x$showmisc = "xtrue" ]
-then
-	setupzipcode
-	settimezone
-    setupcnfs
-fi
-
-#sleep
-if [ x$showsleep = "xtrue" ]
-then
-	setupsleep
-fi
-
-if [ x$showX = "xtrue" ]
-then
-    ${MV_ROOT}/bin/xconfig.sh
-fi
-
-#advanced
-if [ x$showadvanced = "xtrue" ]
-then
-    if [ ! x$showhost = "xtrue" ]
-    then
-        services
-        install="none $ser_install"
-        remove="none $ser_remove"
-        daemon_add=" none $ser_daemon_add"
-        daemon_remove="none $ser_daemon_remove"
-        packages
-
-
-        if [ x$SystemType = xMaster_backend ]
-        then
-            setuppacman link
-            else
-            setuppacman
-        fi
-     fi
-    setupncidclient
-    setupnciddaemon
-    setupbootsplash
-    setuphobbitclient
-    setupreceiver
-    setupevrouter
-    setupblaster
-    setupLCD
-    setupDNSMASQ
-
-fi
-
-
-
-daemons
-#add check for lcd, and restart if needed.
-
-if [ x$RESTART_FE = xtrue ]
-then
-    reloadfe
-fi
-
-
-
-
-
-case $SystemType in
-    Standalone)  smoltsystem=6
-                     MVRELEASE="$MVRELEASE  (Standalone)"
-                    ;;
-   Master_backend)
-            if [ x$RunFrontend = x1 ]
-            then
-                smoltsystem=2
-                MVRELEASE="$MVRELEASE  (MBE with Frontend)"
-            else
-                smoltsystem=1
-                MVRELEASE="$MVRELEASE  (MBE)"
-            fi
-            ;;
-   Slave_backend)
-            if [ x$RunFrontend = x1 ]
-            then
-                smoltsystem=5
-                MVRELEASE="$MVRELEASE  (SLAVE  with Frontend)"
-            else
-                smoltsystem=5
-                MVRELEASE="$MVRELEASE  (SLAVE)"
-            fi
-            ;;
-     Frontend_only)
-          smoltsystem=3
-          MVRELEASE="$MVRELEASE  ( Frontend only)"
-            ;;
-esac
-echo $MVRELEASE > /etc/os_myth_release
-echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info
-echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info
-
diff --git a/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
deleted file mode 100644
index d49fbf6..0000000
--- a/abs/core/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-# 
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-#   Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=shuttleVFD
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as.  LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-#            specific setup! Otherwise LCDd won't be able to find
-#            the driver modules and will thus not be able to
-#            function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order  ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then 
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50			# Brightness (in %) if applicable
-Contrast=50			# Contrast (in %) if applicable
-Backlight=no			# Backlight if applicable
-UpsideDown=no			# flip image upside down
-Invert=no			# invert light/dark pixels
-ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
-				# border whithin the usable text area,
-				# for setting up TextResolution and
-				# MinFontFaceSize (if using FT2);
-ShowBigBorder=no		# border around the unused area
-ShowThinBorder=yes		# border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-#   KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-#   KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname      Function
-#              Normal context              Menu context
-# -------      --------------              ------------
-# PauseKey     Pause/Continue              Enter/select
-# BackKey      Back(Go to previous screen) Up/Left
-# ForwardKey   Forward(Go to next screen)  Down/Right
-# MainMenuKey  Open main menu              Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-#       as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-#       is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's.  ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf b/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf
deleted file mode 100644
index 2596c25..0000000
--- a/abs/core/live-installer/templates/LCD/Silverstone/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-# 
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-#   Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=imon
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as.  LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-#            specific setup! Otherwise LCDd won't be able to find
-#            the driver modules and will thus not be able to
-#            function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order  ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then 
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50			# Brightness (in %) if applicable
-Contrast=50			# Contrast (in %) if applicable
-Backlight=no			# Backlight if applicable
-UpsideDown=no			# flip image upside down
-Invert=no			# invert light/dark pixels
-ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
-				# border whithin the usable text area,
-				# for setting up TextResolution and
-				# MinFontFaceSize (if using FT2);
-ShowBigBorder=no		# border around the unused area
-ShowThinBorder=yes		# border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-#   KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-#   KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname      Function
-#              Normal context              Menu context
-# -------      --------------              ------------
-# PauseKey     Pause/Continue              Enter/select
-# BackKey      Back(Go to previous screen) Up/Left
-# ForwardKey   Forward(Go to next screen)  Down/Right
-# MainMenuKey  Open main menu              Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-#       as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-#       is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's.  ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core/live-installer/templates/LCD/Silverstone/modules b/abs/core/live-installer/templates/LCD/Silverstone/modules
deleted file mode 100644
index cd576c3..0000000
--- a/abs/core/live-installer/templates/LCD/Silverstone/modules
+++ /dev/null
@@ -1 +0,0 @@
-lirc_imon	#LCD
diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf b/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf
deleted file mode 100644
index 2596c25..0000000
--- a/abs/core/live-installer/templates/LCD/antec_fusion/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-# 
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-#   Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-#   g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-#   joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-#   MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-#   sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=imon
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as.  LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-#            specific setup! Otherwise LCDd won't be able to find
-#            the driver modules and will thus not be able to
-#            function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order  ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then 
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50			# Brightness (in %) if applicable
-Contrast=50			# Contrast (in %) if applicable
-Backlight=no			# Backlight if applicable
-UpsideDown=no			# flip image upside down
-Invert=no			# invert light/dark pixels
-ShowDebugFrame=no		# turns on/off 1 pixel thick debugging
-				# border whithin the usable text area,
-				# for setting up TextResolution and
-				# MinFontFaceSize (if using FT2);
-ShowBigBorder=no		# border around the unused area
-ShowThinBorder=yes		# border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-#   KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-#   KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname      Function
-#              Normal context              Menu context
-# -------      --------------              ------------
-# PauseKey     Pause/Continue              Enter/select
-# BackKey      Back(Go to previous screen) Up/Left
-# ForwardKey   Forward(Go to next screen)  Down/Right
-# MainMenuKey  Open main menu              Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-#       as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-#       is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's.  ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf b/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf
deleted file mode 100644
index ce64936..0000000
--- a/abs/core/live-installer/templates/LCD/antec_fusion/lircd.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.1(default) on Thu Sep  6 09:06:50 2007
-#
-# contributed by 
-#
-# brand:                       /tmp/out
-# model no. of remote control: 
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name  Antec_fusion_silver_v1
-  bits           16
-  eps            30
-  aeps          100
-
-  one             0     0
-  zero            0     0
-  post_data_bits  16
-  post_data      0xFF
-  gap          131985
-  min_repeat      6
-  toggle_bit      0
-
-
-      begin codes
-          CW                       0x0001
-          CCW                      0x0100
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/lircrc b/abs/core/live-installer/templates/LCD/antec_fusion/lircrc
deleted file mode 100644
index 7a39704..0000000
--- a/abs/core/live-installer/templates/LCD/antec_fusion/lircrc
+++ /dev/null
@@ -1,15 +0,0 @@
-begin
-  remote =   Antec_fusion_silver_v1
-  prog = mythtv
-  button = CW
-  repeat = 1
-  config = ]
-end
- 
-begin
-  remote =   Antec_fusion_silver_v1
-  prog = mythtv
-  button = CCW
-  repeat = 1
-  config = [
-end
diff --git a/abs/core/live-installer/templates/LCD/antec_fusion/modules b/abs/core/live-installer/templates/LCD/antec_fusion/modules
deleted file mode 100644
index cd576c3..0000000
--- a/abs/core/live-installer/templates/LCD/antec_fusion/modules
+++ /dev/null
@@ -1 +0,0 @@
-lirc_imon	#LCD
diff --git a/abs/core/live-installer/templates/LCD/xosd/LCDd.conf b/abs/core/live-installer/templates/LCD/xosd/LCDd.conf
deleted file mode 100644
index 5b37bd7..0000000
--- a/abs/core/live-installer/templates/LCD/xosd/LCDd.conf
+++ /dev/null
@@ -1,957 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-# 
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-#   Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-#   bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, 
-#   EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior,
-#   irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x,
-#   MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
-#   serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=xosd
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as.  LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-#            specific setup! Otherwise LCDd won't be able to find
-#            the driver modules and will thus not be able to
-#            function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# GoodBye message: each entry represents a display line; default: builtin
-#GoodBye="Thanks for using"
-#GoodBye="   LCDproc!"
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order  ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal:  1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
-[ea65]
-
-# Device is fixed /dev/ttyS1
-# Width and Height are fixed 9x1
-
-# As the VFD is self luminescent we don't have a backlight
-# But we can use the backlight functions to control the front LEDs
-# Brightness 0 to 299 -> LEDs off
-# Brightness 300 to 699 -> LEDs half bright
-# Brightness 700 to 1000 -> LEDs full bright
-Brightness=500
-# OffBrightness is the the value used for the 'backlight off' state
-OffBrightness=0
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then 
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-## optional:
-Brightness=50                   # Brightness (in %) if applicable
-Contrast=50                     # Contrast (in %) if applicable
-Backlight=no                    # Backlight if applicable
-UpsideDown=no                   # flip image upside down
-Invert=no                       # invert light/dark pixels
-ShowDebugFrame=no               # turns on/off 1 pixel thick debugging
-                                # border whithin the usable text area,
-                                # for setting up TextResolution and
-                                # MinFontFaceSize (if using FT2);
-ShowBigBorder=no                # border around the unused area
-ShowThinBorder=yes              # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
-# is still alive. When set to a value bigger then null the character in the
-# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
-#KeepAliveDisplay=0
-
-# If you experience occasional garbage on your display you can use this
-# option as workaround. If set to a value bigger than null it forces a
-# full screen refresh <RefreshDiplay> seconds. Default: 0.
-#RefreshDisplay=5
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-#   KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-#   KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname      Function
-#              Normal context              Menu context
-# -------      --------------              ------------
-# PauseKey     Pause/Continue              Enter/select
-# BackKey      Back(Go to previous screen) Up/Left
-# ForwardKey   Forward(Go to next screen)  Down/Right
-# MainMenuKey  Open main menu              Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-#       is a vfd or vkd as they don't have this feature
-Contrast=480
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# The following table translates from MtxOrb key letters to logical key names.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Mini-box.com picoLCD (usblcd) driver ##
-[picolcd]
-# This is for the Mini-Box.com usblcd device that ships with the M300.  It can 
-# also be purchased separately but this driver has only been tested on the M300 
-# setup.
-
-# KeyTimeout is the time that LCDd spends waiting for a key press before cycling 
-# through other duties.  Higher values make LCDd use less CPU time and make 
-# key presses more detectable.  Lower values make LCDd more responsive but a 
-# little prone to missing key presses.  500 (.5 second) is the default and a
-# balanced value.
-KeyTimeout=500
-
-# Contrast: [default: 1000; legal: 0 - 1000]
-Contrast=1000
-
-# Light the keys? i[default: on; legal: on, off]
-Keylights=on
-
-# If Keylights is on, the you can unlight specific keys below:
-# Key0 is the directional pad.  Key1 - Key5 correspond to the F1 - F5 keys.  
-# There is no LED for the +/- keys.  This is a handy way to indicate to users 
-# which keys are disabled.  [default: on; legal: on, off]
-Key0Light=on
-Key1Light=on
-Key2Light=on
-Key3Light=on
-Key4Light=on
-Key5Light=on
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
-# Note: Currently only tested with G321D & SP14Q002.
-Type=G321D
-
-# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
-CellSize=6x10
-
-# Select what type of connection [legal: classic, bitshaker; default: classic]
-ConnectionType=classic
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## serial POS display driver ##
-[serialPOS]
-
-# Device to use in serial modea [default: /dev/lcd]
-Device=/dev/lcd
-
-# Specifies the size of the display in characters. [default: 16x2]
-Size=16x2
-
-# Set the communication protocol to use with the POS display.
-# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
-Type=AEDEX
-
-# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
-Speed=9600
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's.  ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use, in XLFD format, as given by "xfontsel"
-Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-*
-
-
-# EOF
diff --git a/abs/core/live-installer/templates/cc.orig.sh b/abs/core/live-installer/templates/cc.orig.sh
deleted file mode 100755
index d8fd2dc..0000000
--- a/abs/core/live-installer/templates/cc.orig.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/perl
-# rwraithr added segment for 4 digit channels
-# make sure to set this string to
-# the corresponding remote in /etc/remoted.conf
-#$remote_name = "RC-u43c-1h";
-$remote_name = "$REMOTE_NAME";
-
-sub change_channel {
-        my($channel_digit) = @_;
-        system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit");
-        sleep .5;
-}
-
-$channel=$ARGV[0];
-sleep 1;
-if (length($channel) > 3) {
-        change_channel(substr($channel,0,1));
-        change_channel(substr($channel,1,1));
-        change_channel(substr($channel,2,1));
-        change_channel(substr($channel,3,1));
-} elsif (length($channel) > 2) {
-        change_channel(substr($channel,0,1));
-        change_channel(substr($channel,1,1));
-        change_channel(substr($channel,2,1));
-} elsif (length($channel) > 1) {
-        change_channel(substr($channel,0,1));
-        change_channel(substr($channel,1,1));
-} else {
-        change_channel(substr($channel,0,1));
-}
-system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT");
-
-#system ("sleep 2");
-#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2");
-#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2");
diff --git a/abs/core/live-installer/templates/cc.sh b/abs/core/live-installer/templates/cc.sh
deleted file mode 100755
index 0cce308..0000000
--- a/abs/core/live-installer/templates/cc.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-/usr/local/bin/cc.orig.sh $@  &
-/usr/local/bin/cc_vol.sh &
-
-
diff --git a/abs/core/live-installer/templates/cc_vol.sh b/abs/core/live-installer/templates/cc_vol.sh
deleted file mode 100755
index 819008d..0000000
--- a/abs/core/live-installer/templates/cc_vol.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-sleep 2
-/usr/local/bin/ivtvctl -p 2 -d /dev/video2
-/usr/local/bin/ivtvctl -p 1 -d /dev/video2
-
diff --git a/abs/core/live-installer/templates/change_chan.sh b/abs/core/live-installer/templates/change_chan.sh
deleted file mode 100755
index 5ad8765..0000000
--- a/abs/core/live-installer/templates/change_chan.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-REMOTE_NAME=SA3250
-cmd="$1"
-
-case $cmd in
-	    [0-9]*)
-	        for digit in $(echo $1 | sed -e 's/./& /g'); do 
-		        irsend SEND_ONCE $REMOTE_NAME $digit
-		        sleep  0.3
-	        # If things work OK with sleep 1, try this for faster channel changes:
-	        # sleep 0.3
-	    done
-	        ;;
-
-	   *)
-	           irsend SEND_ONCE $REMOTE_NAME $cmd
-									            ;;
-    esac
-#    /usr/bin/fix_audio.sh &
diff --git a/abs/core/live-installer/templates/cron.template b/abs/core/live-installer/templates/cron.template
deleted file mode 100644
index 3fcea10..0000000
--- a/abs/core/live-installer/templates/cron.template
+++ /dev/null
@@ -1,4 +0,0 @@
-# <minute> <hour> <day> <month> <dow> <command>
-
-
-00 HOUR * * *  /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file
diff --git a/abs/core/live-installer/templates/etcnet/eth/ipv4address b/abs/core/live-installer/templates/etcnet/eth/ipv4address
deleted file mode 100644
index 1df28d2..0000000
--- a/abs/core/live-installer/templates/etcnet/eth/ipv4address
+++ /dev/null
@@ -1,2 +0,0 @@
-192.168.1.158/24
-
diff --git a/abs/core/live-installer/templates/etcnet/eth/ipv4route b/abs/core/live-installer/templates/etcnet/eth/ipv4route
deleted file mode 100644
index 373a4d1..0000000
--- a/abs/core/live-installer/templates/etcnet/eth/ipv4route
+++ /dev/null
@@ -1,2 +0,0 @@
-default via 192.168.1.1 
-
diff --git a/abs/core/live-installer/templates/etcnet/eth/iwconfig b/abs/core/live-installer/templates/etcnet/eth/iwconfig
deleted file mode 100644
index b1f14e0..0000000
--- a/abs/core/live-installer/templates/etcnet/eth/iwconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-essid home_lan
-#key ababababab
diff --git a/abs/core/live-installer/templates/etcnet/eth/options b/abs/core/live-installer/templates/etcnet/eth/options
deleted file mode 100644
index 929da58..0000000
--- a/abs/core/live-installer/templates/etcnet/eth/options
+++ /dev/null
@@ -1,7 +0,0 @@
-# If you want to change current interface name, edit /etc/net/iftab,
-# rename current directory and uncomment this line:
-TYPE=eth
-DISABLED=no
-BOOTPROTO=dhcp
-ONBOOT=yes
-CONFIG_WIRELESS=no
diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-4 b/abs/core/live-installer/templates/evrouter/MythVantage-4
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-8 b/abs/core/live-installer/templates/evrouter/MythVantage-8
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core/live-installer/templates/evrouter/MythVantage-Full b/abs/core/live-installer/templates/evrouter/MythVantage-Full
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core/live-installer/templates/evrouter/MythVantage8-minipac b/abs/core/live-installer/templates/evrouter/MythVantage8-minipac
deleted file mode 100644
index 0e3a708..0000000
--- a/abs/core/live-installer/templates/evrouter/MythVantage8-minipac
+++ /dev/null
@@ -1,3 +0,0 @@
-"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" 
-"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject"
-
diff --git a/abs/core/live-installer/templates/evrouter/MythVantage8-uhid b/abs/core/live-installer/templates/evrouter/MythVantage8-uhid
deleted file mode 100644
index 7cb2e34..0000000
--- a/abs/core/live-installer/templates/evrouter/MythVantage8-uhid
+++ /dev/null
@@ -1,3 +0,0 @@
-"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" 
-"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject"
-
diff --git a/abs/core/live-installer/templates/exports.template b/abs/core/live-installer/templates/exports.template
deleted file mode 100644
index b946287..0000000
--- a/abs/core/live-installer/templates/exports.template
+++ /dev/null
@@ -1,8 +0,0 @@
-# /etc/exports
-#
-# See exports(5) for a description.
-
-# use exportfs -arv to reread
-/data/media    REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
-/data/var/cache    REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
-
diff --git a/abs/core/live-installer/templates/fstab.conf.template b/abs/core/live-installer/templates/fstab.conf.template
deleted file mode 100755
index d27bcd9..0000000
--- a/abs/core/live-installer/templates/fstab.conf.template
+++ /dev/null
@@ -1,16 +0,0 @@
-# 
-# /etc/fstab: static file system information
-#
-# <file system>        <dir>         <type>    <options>          <dump> <pass>
-none                   /dev/pts      devpts    defaults            0      0
-none                   /dev/shm      tmpfs     defaults            0      0
-
-/dev/cdrom             /mnt/cd   iso9660   ro,user,noauto,unhide   0      0
-/dev/dvd               /mnt/dvd  udf       ro,user,noauto,unhide   0      0
-/dev/fd0               /mnt/fl   vfat      user,noauto             0      0
-
-/dev/sda1 / reiserfs defaults 0 1
-/dev/sda2 swap swap defaults 0 0
-/dev/sda3 /data reiserfs defaults 0 0
-192.168.1.6:/media  /data/media nfs
-
diff --git a/abs/core/live-installer/templates/mysql.service b/abs/core/live-installer/templates/mysql.service
deleted file mode 100644
index 160450e..0000000
--- a/abs/core/live-installer/templates/mysql.service
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
-<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
-
-<service-group>
-
-  <name replace-wildcards="yes">mysql_myth on %h</name>
-
-  <service>
-    <type>_mysql._tcp</type>
-    <port>3306</port>
-  </service>
-
-</service-group>
diff --git a/abs/core/live-installer/templates/mysql.txt b/abs/core/live-installer/templates/mysql.txt
deleted file mode 100755
index 04531b5..0000000
--- a/abs/core/live-installer/templates/mysql.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-DBHostName=127.0.0.1
-DBUserName=mythtv
-DBPassword=[REDACTED]
-DBName=mythconverg
-DBType=QMYSQL3
-
-# Set the following if you want to use something other than the
-# machine's real hostname for identifying settings in the database.
-# This is useful if your hostname changes often, as otherwise
-# you'll need to reconfigure mythtv (or futz with the DB) every time.
-# TWO HOSTS MUST NOT USE THE SAME VALUE
-#
-#LocalHostName=my-unique-identifier-goes-here
-
-# If you want your frontend to be able to wake your MySQL server
-# using WakeOnLan, have a look at the following settings:
-#
-# Set the time the frontend waits (in seconds) between reconnect tries.
-# This should be the rough time your MySQL server needs for startup
-#WOLsqlReconnectWaitTime=0
-#
-#
-# This is the amount of retries to wake the MySQL server until the frontend
-# gives up
-#WOLsqlConnectRetry=5
-#
-#
-# This is the command executed to wake your MySQL server.
-#WOLsqlCommand=echo 'WOLsqlServerCommand not set'
diff --git a/abs/core/live-installer/templates/ncid.conf.template b/abs/core/live-installer/templates/ncid.conf.template
deleted file mode 100755
index 43ef490..0000000
--- a/abs/core/live-installer/templates/ncid.conf.template
+++ /dev/null
@@ -1,51 +0,0 @@
-# tcl/tk configuration file
-
-# Directory NCID uses to find the helper scripts
-set ProgDir     /usr/share/ncid
-
-# default helper script
-set EXTPROG     ncid-osd
-
-# Set Host to the NCID server address
-# Host defaults to 127.0.0.1
-#set Host        127.0.0.1
-set Host        192.168.1.5
-
-# The NCID port default is 3333
-set Port        3333
-
-# If the connection to the server is lost,
-# try every Delay seconds to reconnect
-# The Default: 60
-set Delay       20
-
-# If set to 1, display raw data received from the NCID server
-# If set to 0, do not display raw data received from the NCID server
-# Default: 0
-set Raw         0
-
-# If set to 1, output: date time number name
-# If set to 0, output: name number
-# Default: 0
-set All         1
-
-# If set to 1, display formatted CID, and CID log file on connect
-# If set to 0, ddo not isplay formatted CID, and CID log file on connect
-# Default: 0
-set Verbose     0
-
-# If set to 1, display information in terminal progran or external program
-# If set to 0, display information using a GUI
-# Default: 0
-set NoGUI       1
-
-# output name and number to external program
-# Default: 0
-set Callprog    1
-
-# ring number to call external program
-# Default: 0
-set CallOnRing  0
-
-# external called program
-set Program     [list $ProgDir/$EXTPROG]
diff --git a/abs/core/live-installer/templates/ncidd.conf.template b/abs/core/live-installer/templates/ncidd.conf.template
deleted file mode 100644
index daa2e79..0000000
--- a/abs/core/live-installer/templates/ncidd.conf.template
+++ /dev/null
@@ -1,143 +0,0 @@
-# ncid - Network CallerID Server Config File
-
-################################
-# Definitions and Line formats #
-################################
-
-# lines can be blank, or start with the words: send, set #
-#
-# A line is divided into words, separated by spaces
-#
-# A word is either a string of non-blank characters, everything
-# between double quotes, or an equal sign.
-#
-# SEND LINE FORMAT:
-#   send DATATYPE [DATATYPE] ...
-#        where DATATYPE = cidlog, cidinfo
-#
-# SET LINE FORMAT:
-#   set ITEM = VALUE [ITEM = VALUE] ...
-#       where ITEM = cidalias, cidlog, datalog, initcid, initstr,
-#                    lockfile, port, ttyclocal, ttyport, ttyspeed,
-#                    nomodem
-
-############################
-# Log and Info for Clients #
-############################
-
-# Send the call log to a client when connected
-# The default is not to send the call log file
-send cidlog
-
-# Send call info (LINE and RING) to a client at each ring
-# The default is not to send the call info line
-send cidinfo
-
-############################
-# NCID Communications Port #
-############################
-
-# The default TCP/IP port is 3333
- set port = 3333
-
-#######################
-# Alias and Log Files #
-#######################
-
-# The default CID alias file: /etc/ncid/ncidd.alias
-# set cidalias = /etc/ncid/ncidd.alias
-
-# The default CID call log file: /var/log/cidcall.log
-# the log file must exist, ncidd will not create it
-# (also make the change in /etc/logrotate.d/ncidd
-#  and also /etc/ncid/ncidrotate.conf)
-# set cidlog = /var/log/cidcall.log
-
-# The default tty data log file: /var/log/ciddata.log
-# the log file must exist, ncidd will not create it
-#  (also make the change in /etc/logrotate.d/ncidd
-#   and also /etc/ncid/ncidrotate.conf)
-# set datalog = /var/log/ciddata.log
-
-#####################
-# TTY Configuration #
-#####################
-
-# The default tty port: /dev/modem
-# set ttyport = /dev/cu.modem # Macintosh OS X
- set ttyport = /dev/ttyS1
-
-# The default tty port speed: 19200
-# The tty speed can be one of: 38400, 19200, 9600, 4800
-# set ttyspeed = 4800 # NetCallerID port speed
-
-# Ignore tty control signals for internal modems and 3 wire serial cables
-#   Disable tty control signals: ttyclocal = 1
-#   Enable tty control signals: ttyclocal = 0 (default)
-# set ttyclocal = 1
-
-# The lockfile name is generated automatically
-# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem
-# set lockfile = /var/lock/LCK..ttyS0
-
-#####################
-# Modem or No Modem #
-#####################
-
-# Obtain CallerID from a CID device or a modem
-#  device: nomodem = 1 (do not send AT commands)
-#  modem: nomodem = 0 (default - send AT commands)
-# set nomodem = 1
-
-########################
-# Modem Initialization #
-########################
-
-# The default modem initialization is: "AT Z S0=0 E1 V1 Q0"
-# set initstr = "ATE1V1Q0"
-#
-# Alternate modem initialization string
-# set initstr = "AT&FE1V1Q0+VIP"
-
-# Addon strings to set modem for Distinctive Ring:
-#   http://www.modemsite.com/56k/dring.asp
-#
-# 3Com/USR/TI chipset: ATS41=1
-#   Reported Ring Codes: RING A, RING B, RING C
-# Rockwell/Conexant chipset: AT-SDR=7
-#   Reported Ring Codes: RING 1, RING 2, RING 3
-# Lucent/Agere chipset: AT+VDR=1,0
-#   Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34
-#
-# Example adds 3Com DR to the default modem initialization
-# set initstr = "ATE1V1Q0S41=1"
-
-# The default for ncidd is to try two CID strings to setup
-# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1".
-# set initcid = "AT#CID=1"
-#
-# Alternate CID strings to try if default does not work:
-# set initcid = "AT+FCLASS=8;+VCID=1"
-# set initcid = "AT-STE=1;+VCID=1"
-# set initcid = "AT-STE=1;#CID=1"
-
-#################
-# TiVo Settings #
-#################
-# set ttyclocal = 1 # TiVo requires CLOCAL
-# set ttyport = /dev/ttyS1 # TiVo Modem Port
-# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port
-#
-# To use a modem on the TiVo serial port
-#   Tivo (stereo mini jack) ->
-#   -> (stereo mini plug) TiVo serial cable (9-pin male) ->
-#   -> (9-pin Female) PC modem cable (25-pin Male ->
-#   -> (25-pin Female) Modem
-# if the modem has switches, disable DTR
-# Use this string to set the modem before attaching it to the TiVo:
-#   AT&F0&D0&B1&W
-#
-# set ttyport = /dev/ttyS3 # TiVo Serial Port
-#
-# End TiVo Settings
-
diff --git a/abs/core/live-installer/templates/real_change_chan.sh b/abs/core/live-installer/templates/real_change_chan.sh
deleted file mode 100755
index efeba88..0000000
--- a/abs/core/live-installer/templates/real_change_chan.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-REMOTE_NAME=SA3250
-cmd="$1"
-
-case $cmd in
-	    [0-9]*)
-	        for digit in $(echo $1 | sed -e 's/./& /g'); do 
-		        irsend SEND_ONCE $REMOTE_NAME $digit
-		        sleep  0.3
-	        # If things work OK with sleep 1, try this for faster channel changes:
-	        # sleep 0.3
-	    done
-	        ;;
-
-	   *)
-	           irsend SEND_ONCE $REMOTE_NAME $cmd
-									            ;;
-    esac
-    /usr/bin/fix_audio.sh &
diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
deleted file mode 100644
index e7c1539..0000000
--- a/abs/core/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
+++ /dev/null
@@ -1,357 +0,0 @@
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre2(atiusb) on Fri Jan  2 19:09:02 2004
-#
-# contributed by 
-#
-# brand:     ATI Remote Wonder
-# model no. of remote control: 
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name  wonder
-  bits           32
-  eps            30
-  aeps          100
-
-  one             0     0
-  zero            0     0
-  gap          147987
-  toggle_bit      0
-
-
-      begin codes
-          A                        0x0000000014C500F0
-          B                        0x0000000014C601F0
-          POWER                    0x0000000014C702F0
-          TV                       0x0000000014C803F0
-          DVD                      0x0000000014C904F0
-          WEB                      0x0000000014CA05F0
-          GUIDE                    0x0000000014CB06F0
-          GRAB                     0x0000000014CC07F0
-          VOL_DOWN                 0x0000000014CE09F0
-          VOL_UP                   0x0000000014CD08F0
-          MUTE                     0x0000000014CF0AF0
-          CH_DOWN                  0x0000000014D10CF0
-          CH_UP                    0x0000000014D00BF0
-          A                        0x0000000014C500F0
-          B                        0x0000000014C601F0
-          1                        0x0000000014D20DF0
-          2                        0x0000000014D30EF0
-          3                        0x0000000014D40FF0
-          4                        0x0000000014D510F0
-          5                        0x0000000014D611F0
-          6                        0x0000000014D712F0
-          7                        0x0000000014D813F0
-          8                        0x0000000014D914F0
-          9                        0x0000000014DA15F0
-          0                        0x0000000014DC17F0
-          MENU                     0x0000000014DB16F0
-          CHECK                    0x0000000014DD18F0
-          C                        0x0000000014DE19F0
-          D                        0x0000000014E01BF0
-          UP                       0x0000000014DF1AF0
-          LEFT                     0x0000000014E21DF0
-          DOWN                     0x0000000014E722F0
-          RIGHT                    0x0000000014E41FF0
-          OK                       0x0000000014E31EF0
-          REPLAY                   0x0000000014E11CF0
-          FULLSCREEN               0x0000000014E520F0
-          E                        0x0000000014E621F0
-          F                        0x0000000014E823F0
-          REWIND                   0x0000000014E924F0
-          FORWARD                  0x0000000014EB26F0
-          PLAY                     0x0000000014EA25F0
-          RECORD                   0x0000000014EC27F0
-          STOP                     0x0000000014ED28F0
-          PAUSE                    0x0000000014EE29F0
-      end codes
-
-end remote
-
-
-
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
-#
-# contributed by Steffen
-#
-# brand: ATI Sapphire Remote Bob II USB
-# model no. of remote control: 5000024400
-# devices being controlled by this remote: MythTV
-#
-
-begin remote
-
-name       wonder II
-bits       16
-eps        30
-aeps       100
-
-one            0 0
-zero           0 0
-pre_data_bits  8
-pre_data       0x0
-post_data_bits 16
-post_data      0x0
-gap            299851
-toggle_bit     0
-
-
-begin codes
-aux1                0x023F
-aux2                0x023F
-aux3                0x023F
-aux4                0x023F
-mouse_left_btn      0x02A9
-mouse_right_btn     0x02AA
-a                   0x0278
-b                   0x0279
-power               0x020C
-dvd                 0x0238
-tv                  0x0239
-help                0x02BE
-pc                  0x023F
-resize              0x02D5
-hand                0x02D0
-ati                 0x028E
-vol_up              0x0210
-vol_down            0x0211
-mute                0x020D
-ch_up               0x0220
-ch_down             0x0221
-mouse_up            0x013F
-mouse_down          0x013F
-mouse_left          0x013F
-mouse_right         0x013F
-1                   0x0201
-2                   0x0202
-3                   0x0203
-4                   0x0204
-5                   0x0205
-6                   0x0206
-7                   0x0207
-8                   0x0208
-9                   0x0209
-0                   0x0200
-list                0x0254
-check               0x0282
-info                0x02F9
-timer               0x0296
-arrow_up            0x0258
-arrow_left          0x025A
-arrow_right         0x025B
-arrow_down          0x0259
-ok                  0x025C
-c                   0x017A
-d                   0x027B
-play                0x022C
-e                   0x027C
-f                   0x027D
-rewind              0x0229
-rec                 0x0237
-stop                0x0231
-pause               0x0230
-ffwd                0x0228
-end codes
-
-end remote
-
-
-# Please make this file available to others
-# by sending it to <lirc at bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004
-#
-# contributed by gLaNDix
-#
-# brand: ATI
-# model no. of remote control: 5000023600
-# devices being controlled by this remote: MythTV 0.14
-#
-# USB ID: 0bc7:0004
-#
-
-begin remote
-
-   name           REMOTE_WONDER
-   bits           16
-   eps            30
-   aeps          100
-
-   one             0     0
-   zero            0     0
-   pre_data_bits   8
-   pre_data       0x14
-   post_data_bits  16
-   post_data      0x0
-   gap          227933
-   toggle_bit      0
-
-
-       begin codes
-           A                        0x000000000000D500
-           B                        0x000000000000D601
-           C                        0x000000000000EE19
-           D                        0x000000000000F01B
-           E                        0x000000000000F621
-           F                        0x000000000000F823
-           POWER                    0x000000000000D702
-           TV                       0x000000000000D803
-           DVD                      0x000000000000D904
-           WEB                      0x000000000000DA05
-           BOOK                     0x000000000000DB06
-           HAND                     0x000000000000DC07
-           MOUSE_LEFT_BTN	          0x0000000000004D78
-           MOUSE_LEFTBUTTONUP       0x0000000000004E79
-           MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79
-           MOUSE_RIGHT_BTN          0x000000000000517C
-           MOUSE_RIGHTBUTTONUP      0x000000000000527D
-           MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E
-           MOUSE_LEFT               0x0000000000004570
-           MOUSE_RIGHT              0x0000000000004671
-           MOUSE_UP                 0x0000000000004772
-           MOUSE_DOWN               0x0000000000004873
-           MOUSE_UPRIGHT            0x0000000000004A75
-           MOUSE_DOWNRIGHT          0x0000000000004B76
-           MOUSE_DOWNLEFT           0x0000000000004C77
-           MOUSE_UPLEFT             0x0000000000004974
-           VOL_UP                   0x000000000000DD08
-           VOL_DOWN                 0x000000000000DE09
-           MUTE                     0x000000000000DF0A
-           CH_DOWN                  0x000000000000E10C
-           CH_UP                    0x000000000000E00B
-           1                        0x000000000000E20D
-           2                        0x000000000000E30E
-           3                        0x000000000000E40F
-           4                        0x000000000000E510
-           5                        0x000000000000E611
-           6                        0x000000000000E712
-           7                        0x000000000000E813
-           8                        0x000000000000E914
-           9                        0x000000000000EA15
-           0                        0x000000000000EC17
-           DVD_ROOTMENU             0x000000000000EB16
-           SETUP                    0x000000000000ED18
-           ARROW_UP                 0x000000000000EF1A
-           ARROW_RIGHT              0x000000000000F41F
-           ARROW_DOWN               0x000000000000F722
-           ARROW_LEFT               0x000000000000F21D
-           OK                       0x000000000000F31E
-           MAXAMIZE                 0x000000000000F520
-           TV_ON_DEMAND             0x000000000000F11C
-           BACK                     0x000000000000F924
-           PLAY                     0x000000000000FA25
-           NEXT                     0x000000000000FB26
-           RECORD                   0x000000000000FC27
-           STOP                     0x000000000000FD28
-           PAUSE                    0x000000000000FE29
-       end codes
-
-end remote
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
-#
-# contributed by Jason Piterak
-#
-# brand:                       ati
-#                                   This uses the atiusb driver
-#=20
-# model no. of remote control: 5000022000
-#
-# devices being controlled by this remote:
-# MythTV PVR using knopmyth by Cecil and Dale at
-#  http://mysettopbox.tv
-# Key map names are as per ATI's website:
-#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
-# Feel free to change them as you see fit :-)
-#
-# NOTE:  There are 16 channels for this remote; this file only
-# supports one channel.  See the GATOS project for information
-# on how to change the channel.  Not tested.  Unknown channel.
-#
-
-begin remote
-
-  name  atiusb
-  bits           16
-  eps            30
-  aeps          100
-
-  one             0     0
-  zero            0     0
-  pre_data_bits   8
-  pre_data       0x14
-  post_data_bits  16
-  post_data      0xF000
-  gap          139891
-  toggle_bit      0
-
-
-      begin codes
-          a                        0x000000000000C500
-          b                        0x000000000000C601
-          power                    0x000000000000C702
-          tv                       0x000000000000C803
-          dvd                      0x000000000000C904
-          web                      0x000000000000CA05
-          media_library            0x000000000000CB06
-          drag                     0x000000000000CC07
-          mouse-button_left        0x0000000000003D78
-          mouse-button_right       0x000000000000417C
-          mouse-up                 0x0000000000003772
-          mouse-down               0x0000000000003873
-          mouse-left               0x0000000000003570
-          mouse-right              0x0000000000003671
-          mouse-left_up            0x0000000000003974
-          mouse-right_up           0x0000000000003A75
-          mouse-left_down          0x0000000000003C77
-          mouse-right_down         0x0000000000003B76
-          vol-up                   0x000000000000CD08
-          vol-down                 0x000000000000CE09
-          mute                     0x000000000000CF0A
-          chan-up                  0x000000000000D00B
-          chan-down                0x000000000000D10C
-          1                        0x000000000000D20D
-          2                        0x000000000000D30E
-          3                        0x000000000000D40F
-          4                        0x000000000000D510
-          5                        0x000000000000D611
-          6                        0x000000000000D712
-          7                        0x000000000000D813
-          8                        0x000000000000D914
-          9                        0x000000000000DA15
-          0                        0x000000000000DC17
-          dvd-root_menu            0x000000000000DB16
-          launch_setup             0x000000000000DD18
-          c                        0x000000000000DE19
-          d                        0x000000000000E01B
-          tv_on_demand             0x000000000000E11C
-          max_window               0x000000000000E520
-          cursor-up                0x000000000000DF1A
-          cursor-down              0x000000000000E722
-          cursor-left              0x000000000000E21D
-          cursor-right             0x000000000000E41F
-          ok                       0x000000000000E31E
-          e                        0x000000000000E621
-          f                        0x000000000000E823
-          rewind                   0x000000000000E924
-          play                     0x000000000000EA25
-          fast_forward             0x000000000000EB26
-          record                   0x000000000000EC27
-          stop                     0x000000000000ED28
-          pause                    0x000000000000EE29
-      end codes
-
-end remote
diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
deleted file mode 100644
index 80eec07..0000000
--- a/abs/core/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
+++ /dev/null
@@ -1,922 +0,0 @@
-# ~/.mythtv/lircrc
-# 
-# MythTV native LIRC config file for
-# the ATI-Wonder Remote
-# using lirc_atiusb driver
-# 
-
-begin
-prog = mythtv
-button = a
-config = E
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = A
-config = E
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = b
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = B
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = B
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = stop
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ffwd
-config = Right
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = FORWARD
-config = Right
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = rewind
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = REWIND
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = pause
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = play
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = mute
-config = |
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = MUTE
-config = |
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = vol_down
-config = F10
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-config = F10
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = vol_up
-config = F11
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-config = F11
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = f
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = F
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = e
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = E
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ch_up
-config = Up
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = CH_UP
-config = Up
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ch_down
-config = Down
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-config = Down
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ok
-config = Enter
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = OK
-config = Enter
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = rec
-config = R
-repeat = 5
-end 
-
-begin
-prog = mythtv
-button = RECORD
-config = R
-repeat = 5
-end 
-
-
-# ~/.mythtv/lircrc
-# 
-# MythTV native LIRC config file for
-# the ATI-Wonder Remote
-# using lirc_atiusb driver
-# 
-
-begin
-#Jumppoint for Program Guide created in Mythweb
-    prog = mythtv
-    button = TV
-    config = ! 
-end
-
-begin
-#Jumppoint for DVD playback created in Mythweb
-    prog = mythtv
-    button = DVD
-    config = @
-end
-
-begin
-    prog = mythtv
-#Jumppoint for MythWeater created in Mythweb
-    button = WEB
-    config = #
-end
-
-begin
-    prog = mythtv
-#Jumppoint for MythVideo created in Mythweb
-    button = BOOK
-    config = $
-end
-
-begin
-    prog = mythtv
-#Jumppoint for MythWeater created in Mythweb
-    button = HAND
-    config = %
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
-    prog = mythtv
-    button = MOUSE_UP
-    config = Up
-end
-
-begin
-    prog = mythtv
-    button = MOUSE_DOWN
-    config = Down
-end
-
-begin
-    prog = mythtv
-    button = MOUSE_LEFT
-    config = Left
-end
-
-begin
-    prog = mythtv
-    button = MOUSE_RIGHT 
-    config = Right
-end
-
-begin
-    prog = mythtv
-    button = MOUSE_RIGHT_BTN
-    config = Esc
-end
-
-begin
-    prog = mythtv
-# Enter button
-    button = MOUSE_LEFT_BTN 
-    config = Return
-end
-
-begin
-    prog = mythtv
-    button = POWER
-    config = Esc
-end
-
-begin
-    prog = mythtv
-# Enter button
-    button = OK
-    config = Return
-end
-
-begin
-    prog = mythtv
-    button = ARROW_UP
-    config = Up
-end
-
-begin
-    prog = mythtv
-    button = ARROW_DOWN
-    config = Down
-end
-
-begin
-    prog = mythtv
-    button = ARROW_LEFT
-    config = Left
-end
-
-begin
-    prog = mythtv
-    button = ARROW_RIGHT 
-    config = Right
-end
-
-begin
-    prog = mythtv
-    button = D
-    config = Esc
-end
-
-begin
-prog = mythtv
-button = CH_UP
-config = Up
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-config = Down
-end
-
-begin
-  prog = mythtv
-  button = VOL_DOWN
-  repeat = 3
-  config = F10  
-end
-
-begin
-  prog = mythtv
-  button = VOL_UP
-  repeat = 3
-  config = F11  
-end
-
-begin
-    prog = mythtv
-    button = MUTE
-    config = |  
-end
-
-begin
-    prog = mythtv
-    button = DVD_ROOTMENU
-    config = M  
-end
-
-begin
-    prog = mythtv
-# Enter button
-    button = SETUP 
-    config = Return
-end
-
-
-begin
-    prog = mythtv
-    button = A 
-    config = S  
-end
-
-begin
-    prog = mythtv
-    button = B
-    config = I   
-end
-
-begin
-    prog = mythtv
-    button = C
-    config = T   
-end
-
-begin
-prog = mythtv
-# Change focus for PiP (to change channel in the other window)
-button = MAXAMIZE
-config = B
-end
-
-begin
-prog = mythtv
-# Toggle PiP on/off
-button = TV_ON_DEMAND
-config = V
-end
-
-begin
-    prog = mythtv
-    button = BACK
-    config = <  
-end
-
-begin
-    prog = mythtv
-    button = NEXT
-    config = >  
-end
-
-begin
-    prog = mythtv
-    button = BACK
-    config = Left  
-end
-
-
-begin
-    prog = mythtv
-    button = NEXT
-    config = Right  
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = R
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = P
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = P
-end
-
-#Page Up/Down
-begin
-prog = mythtv
-button = E
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = F
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = E
-# Use for backwards commercial skip
-config = Q
-end
-
-begin
-prog = mythtv
-button = F
-# Use for forward commercial skip
-config = Z
-end
-
-#Mplayer
-
-begin
-prog = mplayer
-button = PLAY
-config = pause
-end
-
-begin
-prog = mplayer
-button = PAUSE
-config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = D
-config = quit
-end
-
-begin
-prog = mplayer
-button = MOUSE_RIGHT_BTN
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = E
-repeat = 6
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = F
-repeat = 6
-config = seek 10
-end
-
-begin
-prog = mplayer
-button = BACK
-repeat = 6
-config = seek -70
-end
-
-begin
-prog = mplayer
-button = NEXT
-repeat = 6
-config = seek 70
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 6
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 6
-config = volume 1
-end
-
-#Xine
-
-begin
-prog = xine
-button = PLAY
-config = Play
-end
-
-begin
-prog = xine
-button = PAUSE
-config = PAUSE
-end
-
-begin
-prog = xine
-button = Mute
-config = Mute
-end
-
-begin
-prog = xine
-button = STOP
-config = Stop
-end
-
-begin
-prog = xine
-button = POWER
-config = Quit
-end
-
-begin
-prog = xine
-button = D
-config = quit
-end
-
-begin
-prog = xine
-button = MOUSE_RIGHT_BTN
-config = quit
-end
-
-begin
-prog = xine
-button = ARROW_UP
-repeat = 4
-config = EventUp
-end
-
-begin
-prog = xine
-button = ARROW_DOWN
-repeat = 4
-config = EventDown
-end
-
-begin
-prog = xine
-button = ARROW_LEFT
-repeat = 4
-config = EventLeft
-end
-
-begin
-prog = xine
-button = ARROW_RIGHT
-repeat = 4
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 0
-config = EventSelect
-end
-
-begin
-prog = xine
-button = MOUSE_UP
-repeat = 4
-config = EventUp
-end
-
-begin
-prog = xine
-button = MOUSE_DOWN
-repeat = 4
-config = EventDown
-end
-
-begin
-prog = xine
-button = MOUSE_LEFT
-repeat = 4
-config = EventLeft
-end
-
-begin
-prog = xine
-button = MOUSE_RIGHT
-repeat = 4
-config = EventRight
-end
-
-begin
-prog = xine
-button = MOUSE_LEFT_BTN
-repeat = 0
-config = EventSelect
-end
-
-begin
-prog = xine
-button = DVD_ROOTMENU
-repeat = 0
-config = Menu
-end
-
-#vol down
-begin
-prog = xine
-button = VOL_DOWN
-repeat = 1
-config = Volume-
-end
-
-#vol up
-begin
-prog = xine
-button = VOL_UP
-repeat = 1
-config = Volume+
-end
-
-begin
-prog = xine
-button = TV_ON_DEMAND
-repeat = 1
-config = ZoomIn
-end
-
-begin
-prog = xine
-button = MAXAMIZE
-repeat = 1
-config = ZoomOut
-end
-
-#skip chapter forward
-begin
-prog = xine
-button = NEXT
-repeat = 1
-config = EventNext
-end
-
-#skip chapter backward
-begin
-prog = xine
-button = BACK
-repeat = 1
-config = EventPrior
-end
-
-begin
-prog = xine
-button = F
-repeat = 2
-config = SeekRelative+45
-end
-
-begin
-prog = xine
-button = E
-repeat = 2
-config = SeekRelative-45
-end 
-
diff --git a/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg b/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg
deleted file mode 100644
index 351a111..0000000
Binary files a/abs/core/live-installer/templates/remotes/ATI_wonder/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
deleted file mode 100644
index b76d32c..0000000
--- a/abs/core/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand:                       Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
-  name  Streamzap_PC_Remote
-  bits            6
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           889  889
-  zero          889  889
-  plead         889
-  pre_data_bits   8
-  pre_data       0xA3
-  gap          108344
-  toggle_bit      2
-
-
-      begin codes
-          0                        0x00
-          1                        0x01
-          2                        0x02
-          3                        0x03
-          4                        0x04
-          5                        0x05
-          6                        0x06
-          7                        0x07
-          8                        0x08
-          9                        0x09
-          POWER                    0x0A
-          MUTE                     0x0B
-          CH_UP                    0x0C
-          VOL_UP                   0x0D
-          CH_DOWN                  0x0E
-          VOL_DOWN                 0x0F
-          UP                       0x10
-          LEFT                     0x11
-          OK                       0x12
-          RIGHT                    0x13
-          DOWN                     0x14
-          MENU                     0x15
-          EXIT                     0x16
-          PLAY                     0x17
-          PAUSE                    0x18
-          STOP                     0x19
-          |<<                      0x1A
-          >>|                      0x1B
-          RECORD                   0x1C
-          <<                       0x1D
-          >>                       0x1E
-          RED                      0x20
-          GREEN                    0x21
-          YELLOW                   0x22
-          BLUE                     0x23
-      end codes
-
-end remote
-
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.2(streamzap) on Mon Dec  5 08:45:02 2005
-#
-# contributed by 
-#
-# brand:                       RS_LD_120-MX500
-# model no. of remote control: 
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name  RS_LD
-  bits           15
-  flags SPACE_ENC|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           384  1920
-  zero          384   896
-  ptrail        384
-  gap          70400
-  min_repeat      2
-  toggle_bit      0
-
-
-      begin codes
-          RESET 	   0x19FD
-          TIME             0X1902
-          BLANK            0X1B02
-          PICTURE          0X1882
-          ASPECT           0X1A82
-          BROWSE           0X1982
-          DELETE           0X1B82
-          CARD             0X1842
-          CARD_SOURCE      0X1A42
-          SPARE1           0X1942
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc b/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc
deleted file mode 100644
index 5e668b5..0000000
--- a/abs/core/live-installer/templates/remotes/MX-500-jams/lircrc
+++ /dev/null
@@ -1,832 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
-        remote = RS_LD
-        button = RESET
-        prog   = irexec
-        repeat = 0
-        config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
-        remote = RS_LD
-        button = TIME
-        prog   = irexec
-        repeat = 10
-        config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
-        remote = RS_LD
-        button = BLANK
-        prog   = irexec
-        repeat = 0
-#      config  = ls
-        config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 4
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote =  Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-end
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = i
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
-    prog = mplayer
-    button = pause
-    config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine  commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
-        button = DELETE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
-        button = PICTURE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button =  >>
-repeat = 4
-#config = SeekRelative+30
-config =  SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config =  SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config =  SeekRelative-1200
-end
-
-begin
-prog   = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog   = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog   = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog   = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog   = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog   = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog   = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog   = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog   = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog   = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog   = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog   = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog   = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
-  begin
-    prog = xmms
-    button = PLAY
-    config = PLAY
-  end
-  begin
-    prog = xmms
-    button = clear
-    config = PLAYLIST_CLEAR
-  end
-  begin
-    prog = xmms
-    button = load
-    config = PLAYLIST_ADD .xmms/xmms.m3u
-   end
-  begin
-    prog = xmms
-    button = PAUSE
-    config = PAUSE
-  end
-  begin
-    prog = xmms
-    button = STOP
-    config = STOP
-  end
-  begin
-    prog = xmms
-    button = EXIT
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = POWER
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = CH_UP
-    config = NEXT
-  end
-  begin
-    prog = xmms
-    button = CH_DOWN
-    config = PREV
-  end
-  
-
-
-begin
-    prog = xmms
-    button = >>|
-    config = NEXT
-  end
-begin
-    prog = xmms
-    button = |<<
-    config = PREV
-end
-
-
-begin
-    prog = xmms
-    button = <<
-    config = FWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = <<
-    config = BWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = volup
-    config = VOL_UP 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = voldown
-    config = VOL_DOWN 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = 1
-    config = ONE
-  end
-  begin
-    prog = xmms
-    button = 2
-    config = TWO
-  end
-  begin
-    prog = xmms
-    button = 3
-    config = THREE
-  end
-  begin
-    prog = xmms
-    button = 4
-    config = FOUR
-  end
-  begin
-    prog = xmms
-    button = 5
-    config = FIVE
-  end
-  begin
-    prog = xmms
-    button = 6
-    config = SIX
-  end
-  begin
-    prog = xmms
-    button = 7
-    config = SEVEN
-  end
-  begin
-    prog = xmms
-    button = 8
-    config = EIGHT
-  end
-  begin
-    prog = xmms
-    button = 9
-    config = NINE
-  end
-  begin
-    prog = xmms
-    button = 0
-    config = ZERO
-  end
-  begin
-    prog = xmms
-    button = enter
-    config = SETPOS
-  end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg b/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg
deleted file mode 100644
index 38857f9..0000000
Binary files a/abs/core/live-installer/templates/remotes/MX-500-jams/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf b/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf
deleted file mode 100644
index b76d32c..0000000
--- a/abs/core/live-installer/templates/remotes/MythVantage-one/lircd.conf
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand:                       Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
-  name  Streamzap_PC_Remote
-  bits            6
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           889  889
-  zero          889  889
-  plead         889
-  pre_data_bits   8
-  pre_data       0xA3
-  gap          108344
-  toggle_bit      2
-
-
-      begin codes
-          0                        0x00
-          1                        0x01
-          2                        0x02
-          3                        0x03
-          4                        0x04
-          5                        0x05
-          6                        0x06
-          7                        0x07
-          8                        0x08
-          9                        0x09
-          POWER                    0x0A
-          MUTE                     0x0B
-          CH_UP                    0x0C
-          VOL_UP                   0x0D
-          CH_DOWN                  0x0E
-          VOL_DOWN                 0x0F
-          UP                       0x10
-          LEFT                     0x11
-          OK                       0x12
-          RIGHT                    0x13
-          DOWN                     0x14
-          MENU                     0x15
-          EXIT                     0x16
-          PLAY                     0x17
-          PAUSE                    0x18
-          STOP                     0x19
-          |<<                      0x1A
-          >>|                      0x1B
-          RECORD                   0x1C
-          <<                       0x1D
-          >>                       0x1E
-          RED                      0x20
-          GREEN                    0x21
-          YELLOW                   0x22
-          BLUE                     0x23
-      end codes
-
-end remote
-
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.2(streamzap) on Mon Dec  5 08:45:02 2005
-#
-# contributed by 
-#
-# brand:                       RS_LD_120-MX500
-# model no. of remote control: 
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name  RS_LD
-  bits           15
-  flags SPACE_ENC|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           384  1920
-  zero          384   896
-  ptrail        384
-  gap          70400
-  min_repeat      2
-  toggle_bit      0
-
-
-      begin codes
-          RESET 	   0x19FD
-          TIME             0X1902
-          BLANK            0X1B02
-          PICTURE          0X1882
-          ASPECT           0X1A82
-          BROWSE           0X1982
-          DELETE           0X1B82
-          CARD             0X1842
-          CARD_SOURCE      0X1A42
-          SPARE1           0X1942
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc b/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc
deleted file mode 100755
index 2663c63..0000000
--- a/abs/core/live-installer/templates/remotes/MythVantage-one/lircrc
+++ /dev/null
@@ -1,857 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
-        remote = RS_LD
-        button = RESET
-        prog   = irexec
-        repeat = 0
-        config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
-        remote = RS_LD
-        button = TIME
-        prog   = irexec
-        repeat = 10
-        config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
-        remote = RS_LD
-        button = BLANK
-        prog   = irexec
-        repeat = 0
-#      config  = ls
-        config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 5
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-repeat = 5
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote =  Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-repeat = 5
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-repeat = 5
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-repeat = 5
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = S
-repeat = 5
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
-    prog = mplayer
-    button = pause
-    config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine  commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
-        button = DELETE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
-        button = PICTURE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button =  >>
-repeat = 4
-#config = SeekRelative+30
-config =  SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config =  SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config =  SeekRelative-1200
-end
-
-begin
-prog   = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog   = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog   = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog   = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog   = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog   = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog   = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog   = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog   = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog   = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog   = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog   = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog   = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
-  begin
-    prog = xmms
-    button = PLAY
-    config = PLAY
-  end
-  begin
-    prog = xmms
-    button = clear
-    config = PLAYLIST_CLEAR
-  end
-  begin
-    prog = xmms
-    button = load
-    config = PLAYLIST_ADD .xmms/xmms.m3u
-   end
-  begin
-    prog = xmms
-    button = PAUSE
-    config = PAUSE
-  end
-  begin
-    prog = xmms
-    button = STOP
-    config = STOP
-  end
-  begin
-    prog = xmms
-    button = EXIT
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = POWER
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = CH_UP
-    config = NEXT
-  end
-  begin
-    prog = xmms
-    button = CH_DOWN
-    config = PREV
-  end
-  
-
-
-begin
-    prog = xmms
-    button = >>|
-    config = NEXT
-  end
-begin
-    prog = xmms
-    button = |<<
-    config = PREV
-end
-
-
-begin
-    prog = xmms
-    button = <<
-    config = FWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = <<
-    config = BWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = volup
-    config = VOL_UP 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = voldown
-    config = VOL_DOWN 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = 1
-    config = ONE
-  end
-  begin
-    prog = xmms
-    button = 2
-    config = TWO
-  end
-  begin
-    prog = xmms
-    button = 3
-    config = THREE
-  end
-  begin
-    prog = xmms
-    button = 4
-    config = FOUR
-  end
-  begin
-    prog = xmms
-    button = 5
-    config = FIVE
-  end
-  begin
-    prog = xmms
-    button = 6
-    config = SIX
-  end
-  begin
-    prog = xmms
-    button = 7
-    config = SEVEN
-  end
-  begin
-    prog = xmms
-    button = 8
-    config = EIGHT
-  end
-  begin
-    prog = xmms
-    button = 9
-    config = NINE
-  end
-  begin
-    prog = xmms
-    button = 0
-    config = ZERO
-  end
-  begin
-    prog = xmms
-    button = enter
-    config = SETPOS
-  end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg b/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg
deleted file mode 100644
index e2af610..0000000
Binary files a/abs/core/live-installer/templates/remotes/MythVantage-one/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
deleted file mode 100644
index f8175f3..0000000
--- a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
+++ /dev/null
@@ -1,87 +0,0 @@
-# this config file was generated
-# using lirc-0.7.0pre2(hauppauge) on Thu Jan  1 00:35:50 2004
-#
-# contributed by Jarod Wilson <jcw@wilsonet.com>
-#------------------------------------------------------------------------------
-#
-# filename:          RadioShack_15-2116-vcr0081.lirc
-# encoding:          RC-5
-# brand:             RadioShack Universal (and others)
-# model:             15-2116, set as VCR type 0081
-# supported devices: all
-#
-# note: requires quite a bit of key reassignment w/keymover and EFCs...
-# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO
-#
-#------------------------------------------------------------------------------
-
-begin remote
-  
-  name      rs15-2116-vcr0081
-  bits              11
-  flags     RC5|CONST_LENGTH
-  eps               20
-  aeps              0
-  header            0   0
-  one               889 889
-  zero              889 889
-  plead             889
-  ptrail            0
-  foot              0   0
-  repeat            0   0
-  pre_data_bits     2
-  pre_data          0x02
-  post_data_bits    0
-  post_data         0x0
-  pre               0   0
-  post              0   0
-  gap               113792
-  toggle_bit        2
-  frequency         36000
-  duty_cycle        50
-
-  begin codes
-        0           0x0000000000000140
-        1           0x0000000000000141
-        2           0x0000000000000142
-        3           0x0000000000000143
-        4           0x0000000000000144
-        5           0x0000000000000145
-        6           0x0000000000000146
-        7           0x0000000000000147
-        8           0x0000000000000148
-        9           0x0000000000000149
-        INFO        0x000000000000014a
-	SELECT      0x000000000000014b
-        POWER       0x000000000000014c
-        MUTE        0x000000000000014d
-        MOVE        0x000000000000014e
-        VOL+        0x0000000000000150
-        VOL-        0x0000000000000151
-        RIGHT       0x000000000000015a
-        LEFT        0x000000000000015b
-        ENTER       0x000000000000015c
-        MENU        0x000000000000015d
-        CH+         0x0000000000000160
-        CH-         0x0000000000000161
-        PIP         0x0000000000000162
-        SWAP        0x0000000000000163
-        SLEEP       0x0000000000000166
-        FREEZE      0x0000000000000168
-        PAUSE       0x0000000000000169
-        SKIP        0x000000000000016a
-        EXIT        0x0000000000000171
-        REW         0x0000000000000172
-        REPLAY      0x0000000000000173
-        FFWD        0x0000000000000174
-        PLAY        0x0000000000000175
-        STOP        0x0000000000000176
-        REC         0x0000000000000177
-        SKIP        0x0000000000000178
-        +100        0x0000000000000179
-        LAST        0x000000000000017b
-        GUIDE       0x000000000000017c
-        TV/VIDEO    0x000000000000017e
-  end codes
-
-end remote
diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
deleted file mode 100644
index 91c0de5..0000000
--- a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
+++ /dev/null
@@ -1,539 +0,0 @@
-# ~/.mythtv/lircrc
-# 
-# MythTV native LIRC config file for
-# the RadioShack 15-2116, VCR type 0081
-# using Hauppauge IR receiver
-# 
-# By Jarod Wilson, 2003/12/31
-# Amalgamated from Harry O's
-# .lircrc, the mythtv.org docs, and
-# a few touches of my own. :)
-#
-
-# Channel Up
-begin
-prog = mythtv
-button = CH+
-repeat = 4
-config = Up
-end
-
-# Channel Down
-begin
-prog = mythtv
-button = CH-
-repeat = 4
-config = Down
-end
-
-# OK/Select
-begin
-prog = mythtv
-button = SELECT
-repeat = 4
-config = Return
-end
-
-# Play
-begin
-prog = mythtv
-button = PLAY
-repeat = 4
-config = Space
-end
-
-# Stop
-begin
-prog = mythtv
-button = STOP
-repeat = 4
-config = Esc
-end
-
-# Escape/Exit/Back
-begin
-prog = mythtv
-button = EXIT
-repeat = 4
-config = Esc
-end
-
-# Power Off/Exit
-begin
-prog = mythtv
-button = POWER
-repeat = 4
-config = Esc
-end
-
-# Pause
-begin
-prog = mythtv
-button = PAUSE
-repeat = 4
-config = P
-end
-
-# Mute
-begin
-prog = mythtv
-button = MUTE
-repeat = 4
-config = |
-end
-
-# Rewind (10 sec default)
-begin
-prog = mythtv
-button = REW
-repeat = 4
-config = Left
-end
-
-begin
-prog = mythtv
-button = LEFT
-repeat = 4
-config = Left
-end
-
-# Fast forward (30 sec default)
-begin
-prog = mythtv
-button = FFWD
-repeat = 4
-config = Right
-end
-
-begin
-prog = mythtv
-button = RIGHT
-repeat = 4
-config = Right
-end
-
-# Skip forward (10 min default)
-begin
-prog = mythtv
-button = FREEZE
-repeat = 4
-config = PgDown
-end
-
-# Skip backward (10 min default)
-begin
-prog = mythtv
-button = MOVE
-repeat = 4
-config = PgUp
-end
-
-# Record
-begin
-prog = mythtv
-button = REC
-repeat = 4
-config = R
-end
-
-# OSD browse
-begin
-prog = mythtv
-button = GUIDE
-repeat = 4
-config = O
-end
-
-# Display EPG while in live TV,
-# View selected show while in EPG
-begin
-prog = mythtv
-button = MENU
-repeat = 4
-config = M
-end
-
-# Bring up OSD info
-begin
-prog = mythtv
-button = INFO
-repeat = 4
-config = I
-end
-
-# Change display aspect ratio
-begin
-prog = mythtv
-button = +100
-repeat = 4
-config = W
-end
-
-# Seek to previous commercial cut point
-begin
-prog = mythtv
-button = SLEEP
-repeat = 4
-config = Q
-end
-
-# Seek to next commercial cut point
-begin
-prog = mythtv
-button = ENTER
-repeat = 4
-config = Z
-end
-
-# Change TV card input
-begin
-prog = mythtv
-button = TV/VIDEO
-repeat = 4
-config = C
-end
-
-# Toggle Picture-In-Picture
-begin
-prog = mythtv
-button = PIP
-repeat = 4
-config = V
-end
-
-# Swap PIP
-begin
-prog = mythtv
-button = SWAP
-repeat = 4
-config = N
-end
-
-# Cycle through channel history
-begin
-prog = mythtv
-button = LAST
-repeat = 4
-config = H
-end
-
-# Numbers 0-9
-
-begin
-prog = mythtv
-button = 0
-repeat = 4
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-repeat = 4
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-repeat = 4
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-repeat = 4
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-repeat = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-repeat = 4
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-repeat = 4
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-repeat = 4
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-repeat = 4
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-repeat = 4
-config = 9
-end
-
-### MPlayer commands
-
-begin
-prog = mplayer
-button = MENU
-repeat = 4
-config = osd
-end
-
-begin
-prog = mplayer
-button = PAUSE
-repeat = 4
-config = pause
-end
-
-begin
-prog = mplayer
-button = PLAY
-repeat = 4
-config = seek +1
-end
-
-begin
-prog = mplayer
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = mplayer
-button = REW
-repeat = 4
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = LEFT
-repeat = 4
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = FFWD
-repeat = 4
-config = seek +30
-end
-
-begin
-prog = mplayer
-button = RIGHT
-repeat = 4
-config = seek +30
-end
-
-begin
-prog = mplayer
-button = EXIT
-repeat = 4
-config = quit
-end
-
-begin
-prog = mplayer
-button = FREEZE
-repeat = 4
-config = seek +1200
-end
-
-begin
-prog = mplayer
-button = MOVE
-repeat = 4
-config = seek -1200
-end
-
-begin
-prog = mplayer
-button = +100
-repeat = 4
-config = vo_fullscreen
-end
-
-### Xine commands
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = CH+
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = CH-
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = LEFT
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = RIGHT
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = SELECT
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = GUIDE
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = FFWD
-repeat = 3
-config = SeekRelative+30
-end
-
-begin
-prog = xine
-button = REW
-repeat = 3
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button = VOL+
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VOL-
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = FREEZE
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = LAST 
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = INFO
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = ENTER
-repeat = 3
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = SLEEP
-repeat = 3
-config = SpeedSlower
-end
diff --git a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
deleted file mode 100644
index d465839..0000000
Binary files a/abs/core/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
deleted file mode 100644
index 8e453b9..0000000
--- a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand:                       Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
-  name  Streamzap_PC_Remote
-  bits            6
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           889  889
-  zero          889  889
-  plead         889
-  pre_data_bits   8
-  pre_data       0xA3
-  gap          108344
-  toggle_bit      2
-
-
-      begin codes
-          0                        0x00
-          1                        0x01
-          2                        0x02
-          3                        0x03
-          4                        0x04
-          5                        0x05
-          6                        0x06
-          7                        0x07
-          8                        0x08
-          9                        0x09
-          POWER                    0x0A
-          MUTE                     0x0B
-          CH_UP                    0x0C
-          VOL_UP                   0x0D
-          CH_DOWN                  0x0E
-          VOL_DOWN                 0x0F
-          UP                       0x10
-          LEFT                     0x11
-          OK                       0x12
-          RIGHT                    0x13
-          DOWN                     0x14
-          MENU                     0x15
-          EXIT                     0x16
-          PLAY                     0x17
-          PAUSE                    0x18
-          STOP                     0x19
-          |<<                      0x1A
-          >>|                      0x1B
-          RECORD                   0x1C
-          <<                       0x1D
-          >>                       0x1E
-          RED                      0x20
-          GREEN                    0x21
-          YELLOW                   0x22
-          BLUE                     0x23
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircrc b/abs/core/live-installer/templates/remotes/gr8zap/lircrc
deleted file mode 100644
index 6f86bfe..0000000
--- a/abs/core/live-installer/templates/remotes/gr8zap/lircrc
+++ /dev/null
@@ -1,472 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'
-begin
-   prog = mythtv
-   button = 0
-   config = 0
-end
-
-begin
-   prog = mythtv
-   button = 1
-   config = 1
-end
-
-begin
-   prog = mythtv
-   button = 2
-   config = 2
-end
-
-begin
-   prog = mythtv
-   button = 3
-   config = 3
-end
-
-begin
-   prog = mythtv
-   button = 4
-   config = 4
-end
-
-begin
-   prog = mythtv
-   button = 5
-   config = 5
-end
-
-begin
-   prog = mythtv
-   button = 6
-   config = 6
-end
-
-begin
-   prog = mythtv
-   button = 7
-   config = 7
-end
-
-begin
-   prog = mythtv
-   button = 8
-   config = 8
-end
-
-begin
-   prog = mythtv
-   button = 9
-   config = 9
-end
-
-begin
-   prog = mythtv
-   button = POWER
-   config = Esc
-end
-
-# ???
-begin
-   prog = mythtv
-   button = MUTE
-   config = F9
-end
-
-begin
-   prog = mythtv
-   button = CH_UP
-   repeat = 3
-   config = Up
-end
-
-begin
-   prog = mythtv
-   button = VOL_UP
-   repeat = 3
-   config = ]
-end
-
-begin
-   prog = mythtv
-   button = CH_DOWN
-   repeat = 3
-   config = Down
-end
-
-begin
-   prog = mythtv
-   button = VOL_DOWN
-   repeat = 3
-   config = [
-end
-
-begin
-   prog = mythtv
-   button = UP
-   repeat = 3
-   config = Up
-end
-
-begin
-   prog = mythtv
-   button = LEFT
-# navigates, or skips back during playback or live tv.
-   config = Left
-end
-
-begin
-   prog = mythtv
-   button = OK
-   config = Return
-end
-
-begin
-   prog = mythtv
-   button = RIGHT
-# navigates, or skips forwards during playback or live tv. 
-   config = Right
-end
-
-begin
-   prog = mythtv
-   button = DOWN
-   repeat = 3
-   config = Down
-end
-
-begin
-   prog = mythtv
-   button = MENU
-   config = m
-end
-
-begin
-   prog = mythtv
-   button = EXIT
-   config = Esc
-end
-
-begin
-   prog = mythtv
-   button = PLAY
-   config = l
-end
-
-begin
-   prog = mythtv
-   button = PAUSE
-   config = p
-end
-
-begin
-   prog = mythtv
-   button = STOP
-   config = Esc
-end
-
-begin
-   prog = mythtv
-   # skip backward
-   button = |<<
-   config = PgUp
-end
-
-begin
-   prog = mythtv
-   # skip forward
-   button = >>|
-   config = PgDown
-end
-
-begin
-   prog = mythtv
-   button = RECORD
-   config = r
-end
-
-begin
-   prog = mythtv
-   # rewind
-   button = <<
-   config = <
-end
-
-begin
-   prog = mythtv
-   # fast forward
-   button = >>
-   config = >
-end
-
-begin
-   prog = mythtv
-   button = RED
-   # Delete
-   config = z
-end
-
-begin
-   prog = mythtv
-   button = GREEN
-   # Info
-   config = i
-end
-
-begin
-   prog = mythtv
-   button = YELLOW
-   # change aspect ratio
-   config = w
-end
-
-begin
-   prog = mythtv
-   button = BLUE
-   config = Tab
-end
-
-# MPLAYER
-begin
-   prog = mplayer
-   button = POWER
-   config = quit
-end
-
-begin
-   prog = mplayer
-   button = MUTE
-   config = mute
-end
-
-begin
-   prog = mplayer
-   button = VOL_UP
-   repeat = 3
-   config = volume +1
-end
-
-begin
-   prog = mplayer
-   button = VOL_DOWN
-   repeat = 3
-   config = volume -1
-end
-
-begin
-   prog = mplayer
-   button = UP
-   repeat = 3
-   config = seek +10
-end
-
-begin
-   prog = mplayer
-   button = LEFT
-# navigates, or skips back during playback or live tv.
-   config = seek -30
-end
-
-begin
-   prog = mplayer
-   button = RIGHT
-# navigates, or skips forwards during playback or live tv. 
-   config = seek +60
-end
-
-begin
-   prog = mplayer
-   button = DOWN
-   repeat = 3
-   config = seek -10
-end
-
-begin
-   prog = mplayer
-   button = EXIT
-   config = quit
-end
-
-begin
-   prog = mplayer
-   button = play
-   config = speed_set 1.0
-end
-
-begin
-    prog = mplayer
-    button = pause
-    config = pause
-end
-
-begin
-   prog = mplayer
-   button = STOP
-   config = quit
-end
-
-begin
-   prog = mplayer
-   # skip backward
-   button = |<<
-   config = seek -600
-end
-
-begin
-   prog = mplayer
-   # skip forward
-   button = >>|
-   config = seek +600
-end
-
-begin
-   prog = mplayer
-   # slow forward
-   button = <<
-   config = speed_mult 0.5
-end
-
-begin
-   prog = mplayer
-   # fast forward
-   button = >>
-   config = speed_mult 2.0
-end
-
-### Xine lirc setup By AnDy!
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = UP
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = DOWN
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = LEFT
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = RIGHT
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = >>
-repeat = 3
-#config = SpeedFaster
-config = SeekRelative+60
-end
-
-begin
-prog = xine
-button = <<
-repeat = 3
-#config = SpeedSlower
-config = SeekRelative-60
-end
-
-begin
-prog = xine
-button = VOL_UP
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VOL_DOWN
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = >>|
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = |<<
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = GREEN
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 3
-config = Quit
-end
diff --git a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg
deleted file mode 100644
index 4d1a5fe..0000000
Binary files a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
deleted file mode 100644
index 4987807..0000000
--- a/abs/core/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
+++ /dev/null
@@ -1,274 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
-#
-# contributed by Jens Leuschner <leuschner@gmx.net>
-#
-# brand:             Hauppauge
-# model:             
-# supported devices: WinTV primo; WinTV pci; WinTV radio
-#
-# This config file will work with both homebrew receivers and 
-# original Hauppauge TV cards !!!
-#
-
-begin remote
-
-  name  Hauppauge
-  bits           13
-  flags SHIFT_ENC
-  eps            30
-  aeps          100
-
-  one           950   830
-  zero          950   830
-  plead         960
-  gap          89584
-  repeat_bit      2
-
-      begin codes
-          TV                       0x000000000000100F
-          RADIO                    0x000000000000100C
-          FULL_SCREEN              0x000000000000102E
-          CH+                      0x0000000000001020
-          CH-                      0x0000000000001021
-          VOL-                     0x0000000000001011
-          VOL+                     0x0000000000001010
-          MUTE                     0x000000000000100D
-          SOURCE                   0x0000000000001022
-          1                        0x0000000000001001
-          2                        0x0000000000001002
-          3                        0x0000000000001003
-          4                        0x0000000000001004
-          5                        0x0000000000001005
-          6                        0x0000000000001006
-          7                        0x0000000000001007
-          8                        0x0000000000001008
-          9                        0x0000000000001009
-          0                        0x0000000000001000
-          RESERVED                 0x000000000000101E
-          MINIMIZE                 0x0000000000001026
-      end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
-#
-# contributed by 
-#
-# brand: 				Hauppauge
-# model no. of remote control: 
-# devices being controlled by this remote: PVR 2/350
-#
-
-begin remote
-
-  name  hauppauge_pvr
-  bits           13
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           969   811
-  zero          969   811
-  plead        1097
-  gap          114605
-  toggle_bit      2
-
-
-      begin codes
-          Power                    0x00000000000017FD
-          Go                       0x00000000000017FB
-          1                        0x00000000000017C1
-          2                        0x00000000000017C2
-          3                        0x00000000000017C3
-          4                        0x00000000000017C4
-          5                        0x00000000000017C5
-          6                        0x00000000000017C6
-          7                        0x00000000000017C7
-          8                        0x00000000000017C8
-          9                        0x00000000000017C9
-          Back/Exit                0x00000000000017DF
-          0                        0x00000000000017C0
-          Menu                     0x00000000000017CD
-          Red                      0x00000000000017CB
-          Green                    0x00000000000017EE
-          Yellow                   0x00000000000017F8
-          Blue                     0x00000000000017E9
-          Ch+                      0x00000000000017E0
-          Ch-                      0x00000000000017E1
-          Vol-                     0x00000000000017D1
-          Vol+                     0x00000000000017D0
-          Ok                       0x00000000000017E5
-          Mute                     0x00000000000017CF
-          Blank                    0x00000000000017CC
-          Full                     0x00000000000017FC
-          Rewind                   0x00000000000017F2
-          Play                     0x00000000000017F5
-          Forward                  0x00000000000017F4
-          Record                   0x00000000000017F7
-          Stop                     0x00000000000017F6
-          Pause                    0x00000000000017F0
-          Replay                   0x00000000000017E4
-          Skip                     0x00000000000017DE
-      end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
-#
-# contributed by 
-#
-# brand:   Hauppauge 350
-# Created: G.J. Werler (The Netherlands)
-# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
-# Date:    2004/11/28
-# model no. of remote control: Hauppauge A415-HPG
-# devices being controlled by this remote: PVR-350
-#
-
-begin remote
-
-  name  Hauppauge_350
-  bits           13
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           969   811
-  zero          969   811
-  plead        1097
-  gap          114605
-  toggle_bit      2
-
-
-      begin codes
-          Go                       0x00000000000017BB
-          Power                    0x00000000000017BD
-          TV                       0x000000000000179C
-          Videos                   0x0000000000001798
-          Music                    0x0000000000001799
-          Pictures                 0x000000000000179A
-          Guide                    0x000000000000179B
-          Radio                    0x000000000000178C
-          Up                       0x0000000000001794
-          Left                     0x0000000000001796
-          Right                    0x0000000000001797
-          Down                     0x0000000000001795
-          OK                       0x00000000000017A5
-          Back/Exit                0x000000000000179F
-          Menu/i                   0x000000000000178D
-          Vol+                     0x0000000000001790
-          Vol-                     0x0000000000001791
-          Prev.Ch                  0x0000000000001792
-          Mute                     0x000000000000178F
-          Ch+                      0x00000000000017A0
-          Ch-                      0x00000000000017A1
-          Record                   0x00000000000017B7
-          Stop                     0x00000000000017B6
-          Rewind                   0x00000000000017B2
-          Play                     0x00000000000017B5
-          Forward                  0x00000000000017B4
-          Replay/SkipBackward      0x00000000000017A4
-          Pause                    0x00000000000017B0
-          SkipForward              0x000000000000179E
-          1                        0x0000000000001781
-          2                        0x0000000000001782
-          3                        0x0000000000001783
-          4                        0x0000000000001784
-          5                        0x0000000000001785
-          6                        0x0000000000001786
-          7                        0x0000000000001787
-          8                        0x0000000000001788
-          9                        0x0000000000001789
-          Asterix                  0x000000000000178A
-          0                        0x0000000000001780
-          #                        0x000000000000178E
-          Red                      0x000000000000178B
-          Green                    0x00000000000017AE
-          Yellow                   0x00000000000017B8
-          Blue                     0x00000000000017A9
-      end codes
-
-end remote
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre4(serial) on Sun Oct  2 00:24:32 2005
-#
-# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
-# members of linux user group Vorarlberg www.lugv.at
-# 
-# for ir remote controler from Hauppauge WinTV Nexus-S
-# most of the keys are supported
-#
-# brand:                       Hauppauge
-# model no. of remote control: WinTV Nexus-S
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name  Hauppauge_WinTV_Nexus-S
-  bits           13
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           944   828
-  zero          944   828
-  plead         980
-  gap          113932
-  min_repeat      1
-  toggle_bit      2
-
-
-      begin codes
-          Up                       0x0000000000001794
-          Down                     0x0000000000001795
-          Left                     0x0000000000001796
-          Right                    0x0000000000001797
-          Power                    0x00000000000017BD
-          Ok                       0x00000000000017A5
-          Menu                     0x000000000000178D
-          Back                     0x000000000000179F
-          Red                      0x000000000000178B
-          Green                    0x00000000000017AE
-          Yellow                   0x00000000000017B8
-          Blue                     0x00000000000017A9
-          0                        0x0000000000001780
-          1                        0x0000000000001781
-          2                        0x0000000000001782
-          3                        0x0000000000001783
-          4                        0x0000000000001784
-          5                        0x0000000000001785
-          6                        0x0000000000001786
-          7                        0x0000000000001787
-          8                        0x0000000000001788
-          9                        0x0000000000001789
-          Play                     0x00000000000017B5
-          Pause                    0x00000000000017B0
-          Stop                     0x00000000000017B6
-          Record                   0x00000000000017B7
-          FastFwd                  0x00000000000017B4
-          FastRwd                  0x00000000000017B2
-          Channel+                 0x00000000000017A0
-          Channel-                 0x00000000000017A1
-          Volume+                  0x0000000000001790
-          Volume-                  0x0000000000001791
-          Mute                     0x000000000000178F
-          Timers                   0x000000000000178A
-          Recordings               0x000000000000178E
-          Back                     0x000000000000179F
-          Record                   0x00000000000017B7
-          Pause                    0x00000000000017B0
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
deleted file mode 100644
index d0f36e8..0000000
--- a/abs/core/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
+++ /dev/null
@@ -1,33 +0,0 @@
-# 
-# lircmd config file
-# 
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * RESERVED
-
-MOVE_N  * 2
-MOVE_NE * 3
-MOVE_E  * 6
-MOVE_SE * 9
-MOVE_S  * 8
-MOVE_SW * 7
-MOVE_W  * 4
-MOVE_NW * 1
-MOVE_IN * CH+
-MOVE_OUT * CH-
-
-BUTTON1_TOGGLE * 5
-BUTTON1_TOGGLE * RADIO
-BUTTON2_TOGGLE * VOL+
-BUTTON3_TOGGLE * SOURCE
-
-BUTTON1_CLICK * TV
-BUTTON1_CLICK * VOL-
-BUTTON3_CLICK * MUTE
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg b/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg
deleted file mode 100644
index a40a1e8..0000000
Binary files a/abs/core/live-installer/templates/remotes/hauppauge/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf b/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf
deleted file mode 100644
index 97bbf4c..0000000
--- a/abs/core/live-installer/templates/remotes/imon-pad/lircd.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006
-#
-# contributed by M.Brakemeier
-#
-# brand:                       SoundGraph
-# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
-  name     iMON-PAD
-  bits           32
-  eps            30
-  aeps          100
-
-  one             0     0
-  zero            0     0
-  gap          235965
-  min_repeat      1
-  toggle_bit      0
-
-      begin codes
-          AppExit                  0x288195B7
-        Power                    0x289115B7
-          Record                   0x298115B7
-          Play                     0x2A8115B7
-	  Open			   0x29B1d5B7
-          Rewind                   0x2A8195B7
-          Pause                    0x2A9115B7
-          FastForward              0x2B8115B7
-          PrevChapter              0x2B9115B7
-          Stop                     0x2B9715B7
-          NextChapter              0x298195B7
-          Esc                      0x2BB715B7
-          Eject                    0x299395B7
-          AppLauncher              0x29B715B7
-          MultiMon                 0x2AB195B7
-          TaskSwitcher             0x2A9395B7
-          Mute                     0x2B9595B7
-          Vol+                     0x28A395B7
-          Vol-                     0x28A595B7
-          Ch+                      0x289395B7
-          Ch-                      0x288795B7
-          Timer                    0x2B8395B7
-          1                        0x28B595B7
-          2                        0x2BB195B7
-          3                        0x28B195B7
-          4                        0x2A8595B7
-          5                        0x299595B7
-          6                        0x2AA595B7
-          7                        0x2B9395B7
-          8                        0x2A8515B7
-          9                        0x2AA115B7
-          0                        0x2BA595B7
-          ShiftTab                 0x28B515B7
-          Tab                      0x29A115B7
-        Red                      0x2B8515B7 # MyMovie
-        Green                    0x299195B7 # MyMusic
-        Blue                     0x2BA115B7 # MyPhoto
-        Yellow                   0x28A515B7 # MyTV
-          Bookmark                 0x288515B7
-          Thumbnail                0x2AB715B7
-          AspectRatio              0x29A595B7
-          FullScreen               0x2AA395B7
-        Purple                   0x29A295B7 # MyDVD
-          Menu                     0x2BA385B7
-          Caption                  0x298595B7
-          Language                 0x2B8595B7
-          MouseKeyboard            0x299115B7
-          SelectSpace              0x2A9315B7
-          MouseMenu                0x28B715B7
-          MouseRightClick          0x688481B7
-          Enter                    0x28A195B7
-          MouseLeftClick           0x688301B7
-          WindowsKey               0x2B8195B7
-          Backspace                0x28A115B7
-        Mouse_N                  0x690281B7
-        Mouse_S                  0x688291B7
-        Mouse_W                  0x6A8281B7
-        Mouse_E                  0x688A81B7
-      end codes
-
-end remote 
diff --git a/abs/core/live-installer/templates/remotes/imon-pad/lircrc b/abs/core/live-installer/templates/remotes/imon-pad/lircrc
deleted file mode 100644
index 3ad34d8..0000000
--- a/abs/core/live-installer/templates/remotes/imon-pad/lircrc
+++ /dev/null
@@ -1,240 +0,0 @@
-###################################
-# lircrc config as used by Stev391 June 2007
-# Not all of the buttons are configured yet, only the commonly used buttons
-###################################
-
-# Escape
-begin
-    prog = mythtv
-    button = AppExit
-    config = Esc
-    repeat = 3
-end
-
-# Escape Key 2
-begin
-    prog = mythtv
-    button = Esc
-    config = Esc
-end
-
-# Channel Up
-begin
-    prog   = mythtv
-    button = Ch+
-    config = Up
-    repeat = 3
-end
-
-# Channel Down
-begin
-    prog   = mythtv
-    button = Ch-
-    config = Down
-    repeat = 3
-end
-
-# Volume Up
-begin
-    prog = mythtv
-    button = Vol+
-    repeat = 3
-    config = Right
-end
-
-# Volume Down
-begin
-    prog = mythtv
-    button = Vol-
-    repeat = 3
-    config = Left
-end
-
-# Enter/Return
-begin
-    prog   = mythtv
-    button = Enter
-    config = Return
-end
-
-# Menu Button
-begin
-    prog = mythtv
-    button = Menu
-    config = M
-end
-
-# Mute
-begin
-    prog = mythtv
-    button = Mute
-    config = F9  
-end
-
-# Rewind
-begin
-    prog = mythtv
-    button = Rewind
-    config = PgUp  
-end
-
-# Fast Forward
-begin
-    prog = mythtv
-    button = FastForward
-    config = PgDown  
-end
-
-# Play
-begin
-    prog = mythtv
-    button = Play
-    config = P  
-end
-
-# Pause
-begin
-    prog = mythtv
-    button = Pause
-    config = P  
-end
-
-# Record
-begin
-  prog = mythtv
-  button = Record
-  config = R  
-end
-
-# Stop
-begin
-   prog = mythtv
-   button = Stop
-   config = O  
-end
-
-# Previous Track/Chapter
-begin
-   prog = mythtv
-   button = PrevChapter
-   config = Home  
-end
-
-# Next Track/Chapter
-begin
-   prog = mythtv
-   button = NextChapter
-   config = End
-end
-
-# Jump Point to MythVideo
-begin
-   prog = mythtv
-   button = MyMovie
-   config = F12
-end
-
-# Jump Point to MythMusic
-begin
-   prog = mythtv
-   button = MyMusic
-   config = F11
-end
-
-# Jump Point to LiveTV
-begin
-   prog = mythtv
-   button = MyTV
-   config = F10
-end
-
-# Jump Point to Main Menu
-begin
-   prog = mythtv
-   button = Multimon
-   config = F2
-end
-
-# Jump Point to Myth Gallery
-begin
-   prog = mythtv
-   button = MyPhoto
-   config = F3
-end
-
-# Jump Point to Play DVD
-begin
-   prog = mythtv
-   button = MyDVD
-   config = F4
-end
-
-# Display Information
-begin
-   prog = mythtv
-   button = Caption
-   config = I
-end
-
-##############################
-# Numbers
-##############################
-begin
-    prog = mythtv
-    button = 0
-    config = 0  
-end
-
-begin
-    prog = mythtv
-    button = 1
-    config = 1  
-end
-
-begin
-    prog = mythtv
-    button = 2
-    config = 2  
-end
-
-begin
-    prog = mythtv
-    button = 3
-    config = 3  
-end
-
-begin
-    prog = mythtv
-    button = 4
-    config = 4  
-end
-
-begin
-    prog = mythtv
-    button = 5
-    config = 5  
-end
-
-begin
-    prog = mythtv
-    button = 6
-    config = 6  
-end
-
-begin
-    prog = mythtv
-    button = 7
-    config = 7  
-end
-
-begin
-    prog = mythtv
-    button = 8
-    config = 8  
-end
-
-begin
-    prog = mythtv
-    button = 9
-    config = 9  
-end
diff --git a/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg b/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg
deleted file mode 100644
index 47368c5..0000000
Binary files a/abs/core/live-installer/templates/remotes/imon-pad/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
deleted file mode 100644
index ec3b73e..0000000
--- a/abs/core/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# RC-6 config file
-#
-# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
-#         http://home.hccnet.nl/m.majoor/pronto.pdf
-#
-# used by: Philips
-#
-#########
-#
-# Philips Media Center Edition remote control
-# For use with the USB MCE ir receiver
-#
-# Dan Conti  dconti|acm.wwu.edu
-#
-# Radio, Print, RecTV are only available on the HP Media Center remote control
-#
-
-begin remote
-
-  name mceusb
-  bits           16
-  flags RC6|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  header       2667   889
-  one           444   444
-  zero          444   444
-  pre_data_bits 21
-  pre_data      0x37FF0
-  gap          105000
-  toggle_bit     22
-  rc6_mask     0x100000000
-
-
-      begin codes
-
-# starts at af
-        Radio    0x00007baf
-        Print    0x00007bb1
-        Videos   0x00007bb5
-        Pictures 0x00007bb6
-        RecTV    0x00007bb7
-        Music    0x00007bb8
-        TV       0x00007bb9
-# no ba - d8
-        Guide    0x00007bd9
-        LiveTV   0x00007bda
-        DVD      0x00007bdb
-        Back     0x00007bdc
-        OK       0x00007bdd
-        Right    0x00007bde
-        Left     0x00007bdf
-        Down     0x00007be0
-        Up       0x00007be1
-# no e2,e3
-        Replay   0x00007be4
-        Skip     0x00007be5
-        Stop     0x00007be6
-        Pause    0x00007be7
-        Record   0x00007be8
-        Play     0x00007be9
-        Rewind   0x00007bea
-        Forward  0x00007beb
-        ChanDown 0x00007bec
-        ChanUp   0x00007bed
-        VolDown  0x00007bee
-        VolUp    0x00007bef
-        More     0x00007bf0
-        Mute     0x00007bf1
-        Home     0x00007bf2
-        Power    0x00007bf3
-        Enter    0x00007bf4
-        Clear    0x00007bf5
-        Nine     0x00007bf6
-        Eight    0x00007bf7
-        Seven    0x00007bf8
-        Six      0x00007bf9
-        Five     0x00007bfa
-        Four     0x00007bfb
-        Three    0x00007bfc
-        Two      0x00007bfd
-        One      0x00007bfe
-        Zero     0x00007bff
-      end codes
-
-end remote
diff --git a/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb b/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb
deleted file mode 100644
index 3738bfa..0000000
--- a/abs/core/live-installer/templates/remotes/mceusb/lircrc-mceusb
+++ /dev/null
@@ -1,393 +0,0 @@
-# lircrc.mceusb
-
-###################
-#
-#  MythTV
-#
-###################
-begin
-    prog = mythtv
-    button = One
-    config = 1  
-end
-
-begin
-    prog = mythtv
-    button = Two
-    config = 2  
-end
-
-begin
-    prog = mythtv
-    button = Three
-    config = 3  
-end
-
-begin
-    prog = mythtv
-    button = Four
-    config = 4  
-end
-
-begin
-    prog = mythtv
-    button = Five
-    config = 5  
-end
-
-begin
-    prog = mythtv
-    button = Six
-    config = 6  
-end
-
-begin
-    prog = mythtv
-    button = Seven
-    config = 7  
-end
-
-begin
-    prog = mythtv
-    button = Eight
-    config = 8  
-end
-
-begin
-    prog = mythtv
-    button = Nine
-    config = 9  
-end
-
-begin
-    prog = mythtv
-    button = Zero
-    config = 0  
-end
-
-begin
-    prog = mythtv
-    button = Back
-    config = Esc
-end
-
-begin
-    prog = mythtv
-    button = Guide
-    config = M  
-end
-
-begin
-   prog = mythtv
-   button = More
-   config = I  
-end
-
-begin
-  prog = mythtv
-  button = VolDown
-  config = F10  
-end
-
-begin
-  prog = mythtv
-  button = VolUp
-  config = F11  
-end
-
-begin
-    prog = mythtv
-    button = Up
-    config = Up
-end
-
-begin
-    prog = mythtv
-    button = Down
-    config = Down
-end
-
-begin
-    prog = mythtv
-    button = Left
-    config = Left
-end
-
-begin
-    prog = mythtv
-    button = Right
-    config = Right
-end
-
-begin
-    prog = mythtv
-    button = Play
-    config = Return
-end
-
-begin
-    prog = mythtv
-    button = OK
-    config = Return
-end
-
-begin
-    prog = mythtv
-    button = Mute
-    config = |  
-end
-
-begin
-    prog = mythtv
-    button = Rewind
-    config = Left  
-end
-
-begin
-    prog = mythtv
-    button = Forward
-    config = Right  
-end
-
-begin
-  prog = mythtv
-  button = Record
-  config = R  
-end
-
-begin
-   prog = mythtv
-   button = Stop
-   config = O  
-end
-
-begin
-    prog = mythtv
-    button = Pause
-    config = P  
-end
-
-# Use for backwards commercial skip
-begin
-   prog = mythtv
-   button = Replay
-   config = Q  
-end
-
-# Use for forward commercial skip
-begin
-   prog = mythtv
-   button = Skip
-   config = Z  
-end
-
-
-###################
-#
-#  MPlayer
-#
-###################
-begin
-   prog = mplayer
-   button = Stop
-   config = quit
-end
-
-begin
-   prog = mplayer
-   button = Play
-   config = seek +1
-end
-		   
-begin
-   prog = mplayer
-   button = More
-   config = osd
-end
-			      
-begin
-   prog = mplayer
-   button = Replay
-   config = seek -10
-   repeat = 1
-end
-							     
-begin
-   prog = mplayer
-   button = Skip
-   config = seek +10
-   repeat = 1
-end
-
-begin
-   prog = mplayer
-   button = Rewind
-   config = seek -30
-   repeat = 1
-end
-
-begin
-   prog = mplayer
-   button = Forward
-   config = seek +30
-   repeat = 1
-end
-
-begin
-    prog = mplayer
-    button = Pause
-    config = pause
-end
-								    
-begin
-   prog = mplayer
-   button = VolUp
-   config = volume +1
-   repeat = 1
-end
-
-begin
-   prog = mplayer
-   button = VolDown
-   config = volume -1
-   repeat = 1
-end
-
-begin
-   prog = mplayer
-   button = Mute
-   config = mute
-end
-
-###################
-#
-#  Xine
-#
-###################
-# Xine lirc setup
-begin
-prog = xine
-button = Play
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = Stop
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = Back
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = Pause
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = Up
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = Down
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = Left
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = Right
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = Home
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = Forward
-repeat = 3
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = Rewind
-repeat = 3
-config = SpeedSlower
-end
-
-begin
-prog = xine
-button = VolUp
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VolDown
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = Mute
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = ChanUp
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = ChanDown
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = More
-repeat = 3
-config = OSDStreamInfos
-end 
-
diff --git a/abs/core/live-installer/templates/remotes/mceusb/preview.jpg b/abs/core/live-installer/templates/remotes/mceusb/preview.jpg
deleted file mode 100644
index 0aa6a4a..0000000
Binary files a/abs/core/live-installer/templates/remotes/mceusb/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/no_remote/preview.jpg b/abs/core/live-installer/templates/remotes/no_remote/preview.jpg
deleted file mode 100644
index 1d887dd..0000000
Binary files a/abs/core/live-installer/templates/remotes/no_remote/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/receiver_usb.id b/abs/core/live-installer/templates/remotes/receiver_usb.id
deleted file mode 100644
index b99f91b..0000000
--- a/abs/core/live-installer/templates/remotes/receiver_usb.id
+++ /dev/null
@@ -1,4 +0,0 @@
-0bc7:0005	snapstream_firefly	X10 Wireless Technology, Inc.
-0e9c:0000	streamzap	Streamzap, Inc. Streamzap Remote Control
-0471:0815	mceusb	Microsoft usb receiver_transmitter rc6
-	
diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
deleted file mode 100644
index 288bb51..0000000
--- a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
+++ /dev/null
@@ -1,127 +0,0 @@
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005
-#
-# contributed by
-#
-# brand: Snapstream Firefly Remote
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
-name Snapstream_Firefly
-bits 40
-eps 30
-aeps 100
-
-one 0 0
-zero 0 0
-gap 219964
-toggle_bit 0
-
-
-begin codes
-MAXI 0x0000001481AC0000
-MAXI 0x00000014012C0000
-CLOSE 0x00000014D7020000
-CLOSE 0x0000001457820000
-1 0x00000014628D0000
-1 0x00000014E20D0000
-2 0x00000014E30E0000
-2 0x00000014638E0000
-3 0x00000014648F0000
-3 0x00000014E40F0000
-4 0x00000014E5100000
-4 0x0000001465900000
-5 0x0000001466910000
-5 0x00000014E6110000
-6 0x00000014E7120000
-6 0x0000001467920000
-7 0x0000001468930000
-7 0x00000014E8130000
-8 0x00000014E9140000
-8 0x0000001469940000
-9 0x000000146A950000
-9 0x00000014EA150000
-0 0x00000014EC170000
-0 0x000000146C970000
-BACK 0x000000146B960000
-BACK 0x00000014EB160000
-ENT 0x00000014ED180000
-ENT 0x000000146D980000
-VOL+ 0x000000145E890000
-VOL+ 0x00000014DE090000
-VOL- 0x000000145D880000
-VOL- 0x00000014DD080000
-MUTE 0x000000145F8A0000
-MUTE 0x00000014DF0A0000
-FIREFLY 0x0000001455800000
-FIREFLY 0x00000014D5000000
-CH+ 0x00000014608B0000
-CH+ 0x00000014E00B0000
-CH- 0x00000014618C0000
-CH- 0x00000014E10C0000
-INFO 0x0000001483AE0000
-INFO 0x00000014032E0000
-OPTION 0x0000001484AF0000
-OPTION 0x00000014042F0000
-UP 0x000000146F9A0000
-UP 0x00000014EF1A0000
-LEFT 0x00000014729D0000
-LEFT 0x00000014F21D0000
-DOWN 0x0000001477A20000
-DOWN 0x00000014F7220000
-RIGHT 0x00000014749F0000
-RIGHT 0x00000014F41F0000
-OK 0x00000014739E0000
-OK 0x00000014F31E0000
-MENU 0x00000014719C0000
-MENU 0x00000014F11C0000
-EXIT 0x0000001475A00000
-EXIT 0x00000014F5200000
-REC 0x00000014FC270000
-REC 0x000000147CA70000
-PLAY 0x00000014FA250000
-PLAY 0x000000147AA50000
-STOP 0x00000014FD280000
-STOP 0x000000147DA80000
-REW 0x00000014F9240000
-REW 0x0000001479A40000
-FWD 0x00000014FB260000
-FWD 0x000000147BA60000
-PREV 0x00000014002B0000
-PREV 0x0000001480AB0000
-PAUSE 0x00000014FE290000
-PAUSE 0x000000147EA90000
-NEXT 0x00000014FF2A0000
-NEXT 0x000000147FAA0000
-MUSIC 0x00000014DB060000
-MUSIC 0x000000145B860000
-PHOTOS 0x00000014DA050000
-PHOTOS 0x000000145A850000
-DVD 0x00000014D9040000
-DVD 0x0000001459840000
-TV 0x00000014D8030000
-TV 0x0000001458830000
-VIDEO 0x00000014DC070000
-VIDEO 0x000000145C870000
-HELP 0x00000014D6010000
-HELP 0x0000001456810000
-MOUSE 0x00000014022D0000
-MOUSE 0x0000001482AD0000
-A 0x00000014EE190000
-A 0x000000146E990000
-B 0x00000014F01B0000
-B 0x00000014709B0000
-C 0x00000014F6210000
-C 0x0000001476A10000
-D 0x00000014F8230000
-D 0x0000001478A30000
-
-end codes
-
-end remote
\ No newline at end of file
diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
deleted file mode 100644
index e918011..0000000
--- a/abs/core/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
+++ /dev/null
@@ -1,590 +0,0 @@
-# ~/.mythtv/lircrc
-#
-# MythTV native LIRC config file for
-# the new grey Hauppauge remote
-#
-# Modified from Jarod Wilson's which came from Jeff Campbell's
-# By Brad Templeton
-
-
-# Here we have the jump point commands.  They only work if you have
-# defined function keys for these jump points.  For me the most
-# common command is the menu of recordings, so I put that on "videos"
-# even though that's counter-intuitive
-
-begin
-prog = mythtv
-button = TV
-repeat = 3
-config = F5
-end
-
-begin
-prog = mythtv
-button = Videos
-repeat = 3
-config = F2
-end
-
-# Not yet defined
-begin
-prog = mythtv
-button = Music
-repeat = 3
-config = Up
-end
-
-# Given another function for now, I don't use mythgallery
-begin
-prog = mythtv
-button = Pictures
-repeat = 3
-config = F
-end
-
-begin
-prog = mythtv
-button = Guide
-repeat = 3
-config = F3
-end
-
-# I stuck the "todo" list on here as Myth has no radio function
-begin
-prog = mythtv
-button = Radio
-repeat = 3
-config = F4
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = LEFT
-repeat = 3
-config = Left
-end
-
-begin
-prog = mythtv
-button = RIGHT
-repeat = 3
-config = Right
-end
-
-# Channel Up
-begin
-prog = mythtv
-button = Channel-UP
-repeat = 3
-config = Up
-end
-
-# Channel Down
-begin
-prog = mythtv
-button = Channel-DOWN
-repeat = 3
-config = Down
-end
-
-# OK/Select
-begin
-prog = mythtv
-button = Ok
-config = Space
-end
-
-# Play
-begin
-prog = mythtv
-button = Play
-config = Return
-end
-
-# Stop
-begin
-prog = mythtv
-button = Stop
-config = I
-end
-
-# Escape/Exit/Back
-begin
-prog = mythtv
-button = BACK
-config = Esc
-end
-
-# Power Off/Exit
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-
-# Pause
-begin
-prog = mythtv
-button = Pause
-repeat = 3
-config = P
-end
-
-# Mute
-begin
-prog = mythtv
-button = Mute
-repeat = 3
-config = |
-end
-
-# Fast forward (30 sec default)
-begin
-prog = mythtv
-button = Rewind
-repeat = 3
-config = PgUp
-end
-
-# Rewind (10 sec default)
-begin
-prog = mythtv
-button = Forward
-repeat = 3
-config = PgDown
-end
-
-# Skip forward (10 min default)
-begin
-prog = mythtv
-button = Next
-repeat = 3
-config = End
-end
-
-# Skip backward (10 min default)
-begin
-prog = mythtv
-button = Previous
-repeat = 3
-config = Home
-end
-
-# Record
-begin
-prog = mythtv
-button = Record
-repeat = 3
-config = R
-end
-
-# Delete
-begin
-prog = mythtv
-button = Red
-repeat = 3
-config = D
-end
-
-# Decrease play speed
-begin
-prog = mythtv
-button = Green
-repeat = 3
-config = J
-end
-
-# Display EPG while in live TV,
-# View selected show while in EPG
-begin
-prog = mythtv
-button = Menu
-repeat = 3
-config = M
-end
-
-# Scroll up
-begin
-prog = mythtv
-button = Volume-UP
-repeat = 3
-config = F11
-end
-
-# Scroll down
-begin
-prog = mythtv
-button = Volume-DOWN
-repeat = 3
-config = F10
-end
-
-# Bring up OSD info
-begin
-prog = mythtv
-button = Go
-repeat = 3
-config = I
-end
-
-# Change display aspect ratio
-begin
-prog = mythtv
-button = Prev-Channel
-repeat = 3
-config = W
-end
-
-# double speed watch
-begin
-prog = mythtv
-button = Yellow
-repeat = 3
-config = J
-end
-
-# change tuners
-#begin
-#prog = mythtv
-#button = hash
-#repeat = 3
-#config = Y
-#end
-
-# Bring up Time stretch
-begin
-prog = mythtv
-button = Blue
-repeat = 3
-config = Y
-end
-
-# Numbers 0-9
-
-begin
-prog = mythtv
-button = 0
-repeat = 3
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-repeat = 3
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-repeat = 3
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-repeat = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-repeat = 3
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-repeat = 3
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-repeat = 3
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-repeat = 3
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-repeat = 3
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-repeat = 3
-config = 9
-end
-
-
-### MPlayer lirc setup
-
-# Show OSD
-begin
-prog = mplayer
-button = MENU
-repeat = 3
-config = osd
-end
-
-# Pause playback
-begin
-prog = mplayer
-button = PAUSE
-repeat = 3
-config = pause
-end
-
-# Skip ahead a minute if playing
-# If paused, resume playing
-begin
-prog = mplayer
-button = PLAY
-repeat = 3
-config = seek +1
-end
-
-# Stop playback and exit
-begin
-prog = mplayer
-button = Back
-repeat = 3
-config = quit
-end
-
-# Mute
-begin
-prog = mplayer
-button = MUTE
-repeat = 3
-config = mute
-end
-
-# Seek back 10 seconds
-begin
-prog = mplayer
-button = LEFT
-repeat = 3
-config = seek -7
-end
-
-# Seek forward 30 seconds
-begin
-prog = mplayer
-button = RIGHT
-repeat = 3
-config = seek +30
-end
-
-# Quit
-begin
-prog = mplayer
-button = EXIT
-repeat = 3
-config = quit
-end
-
-# Seek forward 10 minutes
-begin
-prog = mplayer
-button = SKIP
-repeat = 3
-config = seek +600
-end
-
-# Seek backward 10 minutes
-begin
-prog = mplayer
-button = REPLAY
-repeat = 3
-config = seek -600
-end
-
-# Toggle full-screen
-begin
-prog = mplayer
-button = FULL
-repeat = 3
-config = vo_fullscreen
-end
-
-### Xine lirc setup
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = OFF
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = CH+
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = CH-
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = VOL-
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = VOL+
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = BACK
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = FFW
-repeat = 3
-#config = SpeedFaster
-config = SeekRelative+60
-end
-
-begin
-prog = xine
-button = REW
-repeat = 3
-#config = SpeedSlower
-config = SeekRelative-60
-end
-
-begin
-prog = xine
-button = FULL
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = BLANK
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = SKIP
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = REPLAY
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = GO
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = RED
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = RED
-repeat = 3
-config = Quit
-end
\ No newline at end of file
diff --git a/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg b/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg
deleted file mode 100644
index a1fbc6e..0000000
Binary files a/abs/core/live-installer/templates/remotes/snapstream_firefly/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
deleted file mode 100644
index 8e453b9..0000000
--- a/abs/core/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand:                       Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
-  name  Streamzap_PC_Remote
-  bits            6
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           889  889
-  zero          889  889
-  plead         889
-  pre_data_bits   8
-  pre_data       0xA3
-  gap          108344
-  toggle_bit      2
-
-
-      begin codes
-          0                        0x00
-          1                        0x01
-          2                        0x02
-          3                        0x03
-          4                        0x04
-          5                        0x05
-          6                        0x06
-          7                        0x07
-          8                        0x08
-          9                        0x09
-          POWER                    0x0A
-          MUTE                     0x0B
-          CH_UP                    0x0C
-          VOL_UP                   0x0D
-          CH_DOWN                  0x0E
-          VOL_DOWN                 0x0F
-          UP                       0x10
-          LEFT                     0x11
-          OK                       0x12
-          RIGHT                    0x13
-          DOWN                     0x14
-          MENU                     0x15
-          EXIT                     0x16
-          PLAY                     0x17
-          PAUSE                    0x18
-          STOP                     0x19
-          |<<                      0x1A
-          >>|                      0x1B
-          RECORD                   0x1C
-          <<                       0x1D
-          >>                       0x1E
-          RED                      0x20
-          GREEN                    0x21
-          YELLOW                   0x22
-          BLUE                     0x23
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/streamzap/lircrc b/abs/core/live-installer/templates/remotes/streamzap/lircrc
deleted file mode 100755
index 5e668b5..0000000
--- a/abs/core/live-installer/templates/remotes/streamzap/lircrc
+++ /dev/null
@@ -1,832 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
-        remote = RS_LD
-        button = RESET
-        prog   = irexec
-        repeat = 0
-        config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
-        remote = RS_LD
-        button = TIME
-        prog   = irexec
-        repeat = 10
-        config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
-        remote = RS_LD
-        button = BLANK
-        prog   = irexec
-        repeat = 0
-#      config  = ls
-        config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 4
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote =  Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-end
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = i
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
-    prog = mplayer
-    button = pause
-    config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine  commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
-        button = DELETE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
-        button = PICTURE
-        prog   = xine
-        repeat = 4
-        config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button =  >>
-repeat = 4
-#config = SeekRelative+30
-config =  SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config =  SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config =  SeekRelative-1200
-end
-
-begin
-prog   = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog   = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog   = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog   = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog   = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog   = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog   = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog   = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog   = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog   = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog   = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog   = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog   = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
-  begin
-    prog = xmms
-    button = PLAY
-    config = PLAY
-  end
-  begin
-    prog = xmms
-    button = clear
-    config = PLAYLIST_CLEAR
-  end
-  begin
-    prog = xmms
-    button = load
-    config = PLAYLIST_ADD .xmms/xmms.m3u
-   end
-  begin
-    prog = xmms
-    button = PAUSE
-    config = PAUSE
-  end
-  begin
-    prog = xmms
-    button = STOP
-    config = STOP
-  end
-  begin
-    prog = xmms
-    button = EXIT
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = POWER
-    config = QUIT
-    flags = mode
-  end
-
-  begin
-    prog = xmms
-    button = CH_UP
-    config = NEXT
-  end
-  begin
-    prog = xmms
-    button = CH_DOWN
-    config = PREV
-  end
-  
-
-
-begin
-    prog = xmms
-    button = >>|
-    config = NEXT
-  end
-begin
-    prog = xmms
-    button = |<<
-    config = PREV
-end
-
-
-begin
-    prog = xmms
-    button = <<
-    config = FWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = <<
-    config = BWD 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = volup
-    config = VOL_UP 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = voldown
-    config = VOL_DOWN 10
-    repeat = 2
-  end
-  begin
-    prog = xmms
-    button = 1
-    config = ONE
-  end
-  begin
-    prog = xmms
-    button = 2
-    config = TWO
-  end
-  begin
-    prog = xmms
-    button = 3
-    config = THREE
-  end
-  begin
-    prog = xmms
-    button = 4
-    config = FOUR
-  end
-  begin
-    prog = xmms
-    button = 5
-    config = FIVE
-  end
-  begin
-    prog = xmms
-    button = 6
-    config = SIX
-  end
-  begin
-    prog = xmms
-    button = 7
-    config = SEVEN
-  end
-  begin
-    prog = xmms
-    button = 8
-    config = EIGHT
-  end
-  begin
-    prog = xmms
-    button = 9
-    config = NINE
-  end
-  begin
-    prog = xmms
-    button = 0
-    config = ZERO
-  end
-  begin
-    prog = xmms
-    button = enter
-    config = SETPOS
-  end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core/live-installer/templates/remotes/streamzap/preview.jpg b/abs/core/live-installer/templates/remotes/streamzap/preview.jpg
deleted file mode 100644
index 4d1a5fe..0000000
Binary files a/abs/core/live-installer/templates/remotes/streamzap/preview.jpg and /dev/null differ
diff --git a/abs/core/live-installer/templates/samba/smb.conf.home b/abs/core/live-installer/templates/samba/smb.conf.home
deleted file mode 100755
index b850a7d..0000000
--- a/abs/core/live-installer/templates/samba/smb.conf.home
+++ /dev/null
@@ -1,10 +0,0 @@
-[home]
-   path = /data/home/mythtv/
-   public = yes
-   only guest = yes
-   writeable  = yes
-   printable = no
-  force user = mythtv
-  force group = mythtv
-  create mask = 0755
-
diff --git a/abs/core/live-installer/templates/samba/smb.conf.media b/abs/core/live-installer/templates/samba/smb.conf.media
deleted file mode 100755
index 6a4ec91..0000000
--- a/abs/core/live-installer/templates/samba/smb.conf.media
+++ /dev/null
@@ -1,10 +0,0 @@
-[media]
-   path = /data/media
-   public = yes
-   only guest = yes
-   writeable  = yes
-   printable = no
-  force user = mythtv
-  force group = mythtv
-  create mask = 0755
-
diff --git a/abs/core/live-installer/templates/samba/smb.conf.template b/abs/core/live-installer/templates/samba/smb.conf.template
deleted file mode 100644
index 42ddb99..0000000
--- a/abs/core/live-installer/templates/samba/smb.conf.template
+++ /dev/null
@@ -1,125 +0,0 @@
-#
-#======================= Global Settings =====================================
-[global]
-
-   workgroup = home_lan
-   server string = MythVantage
-
-# Security mode. Defines in which mode Samba will operate. Possible 
-# values are share, user, server, domain and ads. Most people will want 
-# user level security. See the Samba-HOWTO-Collection for details.
-   security = share
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-;   hosts allow = 192.168.1. 192.168.2. 127.
-
-   load printers = no
-
-# you may wish to override the location of the printcap file
-;   printcap name = /etc/printcap
-
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 50
-
-# Use password server option only with security = server
-# The argument list may include:
-#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-#   password server = *
-;   password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-;   realm = MY_REALM
-
-# Backend to store user information in. New installations should 
-# use either tdbsam or ldapsam. smbpasswd is available for backwards 
-# compatibility. tdbsam requires no further configuration.
-;   passdb backend = tdbsam
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-#       this line.  The included file is read at that point.
-;   include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-;   interfaces = 192.168.12.2/24 192.168.13.2/24 
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-;   local master = no
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-;   os level = 33
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-;   domain master = yes 
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-;   preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for 
-# Windows95 workstations. 
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
-   dns proxy = no 
-
-# These scripts are used on a domain controller or stand-alone 
-# machine to add or delete corresponding unix accounts
-;  add user script = /usr/sbin/useradd %u
-;  add group script = /usr/sbin/groupadd %g
-;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-;  delete user script = /usr/sbin/userdel %u
-;  delete user from group script = /usr/sbin/deluser %u %g
-;  delete group script = /usr/sbin/groupdel %g
-
-
-#============================ Share Definitions ==============================
-
-
diff --git a/abs/core/live-installer/templates/settings/default_1/keybindings.txt b/abs/core/live-installer/templates/settings/default_1/keybindings.txt
deleted file mode 100644
index f82f2d2..0000000
--- a/abs/core/live-installer/templates/settings/default_1/keybindings.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-context	action	description	keylist	hostname
-Music	FFWD	Fast forward	PgDown	REPLACEME
-Music	STOP	Stop playback	O	REPLACEME
-Music	MUTE	Mute	|,\\\\,F9	REPLACEME
-Gallery	SCROLLUP	Scroll image up	2	REPLACEME
-Music	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
-Music	VOLUMEUP	Volume up	],},F11	REPLACEME
-qt	DELETE	Delete	D	REPLACEME
-Music	RWND	Rewind	PgUp	REPLACEME
-qt	EDIT	Edit	E	REPLACEME
-Music	PAUSE	Pause/Start playback	P	REPLACEME
-Gallery	RECENTER	Recenter image	5	REPLACEME
-Gallery	FULLSIZE	Full-size (un-zoom) image	0	REPLACEME
-Gallery	LOWRIGHT	Go to the lower-right corner of the image	PgDown	REPLACEME
-Gallery	SCROLLRIGHT	Scroll image right	6	REPLACEME
-Gallery	MENU	Toggle activating menu in thumbnail view	M	REPLACEME
-Gallery	SCROLLDOWN	Scroll image down	8	REPLACEME
-Gallery	ZOOMIN	Zoom image in	9	REPLACEME
-Gallery	UPLEFT	Go to the upper-left corner of the image	PgUp	REPLACEME
-Gallery	RANDOMSHOW	Start Random Slideshow in thumbnail view	R	REPLACEME
-Gallery	ROTLEFT	Rotate image left 90 degrees	[,1	REPLACEME
-Gallery	SLIDESHOW	Start Slideshow in thumbnail view	S	REPLACEME
-Gallery	ROTRIGHT	Rotate image right 90 degrees	],3	REPLACEME
-Gallery	END	Go to the last image in thumbnail view	End	REPLACEME
-Gallery	HOME	Go to the first image in thumbnail view	Home	REPLACEME
-Gallery	SCROLLLEFT	Scroll image left	4	REPLACEME
-Gallery	PLAY	Start/Stop Slideshow	P	REPLACEME
-NetFlix	REMOVE	Removes movie from queue	D	REPLACEME
-Archive	TOGGLECUT	Toggle use cut list state for selected program	C	REPLACEME
-Gallery	ZOOMOUT	Zoom image out	7	REPLACEME
-NetFlix	MOVETOTOP	Moves movie to top of queue	1	REPLACEME
-Global	DOWN	Down Arrow	Down	REPLACEME
-ITV Menu	MENUTEXT	Menu Text	F7	REPLACEME
-ITV Menu	TEXTEXIT	Menu Exit	F6	REPLACEME
-Global	LEFT	Left Arrow	Left	REPLACEME
-Global	RIGHT	Right Arrow	Right	REPLACEME
-Global	UP	Up Arrow	Up	REPLACEME
-Global	MENU	Pop-up menu	M	REPLACEME
-Global	PREVVIEW	Previous View	Home	REPLACEME
-Global	ESCAPE	Escape	Esc	REPLACEME
-Global	PAGEUP	Page Up	PgUp	REPLACEME
-Global	SELECT	Select	Return,Enter,Space	REPLACEME
-Global	HELP	Help	F1	REPLACEME
-Global	INFO	More information	I	REPLACEME
-Global	NEXTVIEW	Next View	End	REPLACEME
-ITV Menu	MENUBLUE	Menu Blue	F5	REPLACEME
-Global	PAGEDOWN	Page Down	PgDown	REPLACEME
-Global	EJECT	Eject Removable Media		REPLACEME
-Global	3	3	3	REPLACEME
-Global	1	1	1	REPLACEME
-Global	6	6	6	REPLACEME
-Global	0	0	0	REPLACEME
-Global	2	2	2	REPLACEME
-Global	4	4	4	REPLACEME
-TV Frontend	DELETE	Delete Program	D	REPLACEME
-Global	8	8	8	REPLACEME
-Global	7	7	7	REPLACEME
-TV Frontend	PAGEDOWN	Page Down	9	REPLACEME
-TV Frontend	PAGEUP	Page Up	3	REPLACEME
-Global	5	5	5	REPLACEME
-TV Frontend	CHANGERECGROUP	Change Recording Group		REPLACEME
-Global	9	9	9	REPLACEME
-Video	END	Go to the last video	End	REPLACEME
-Video	INCPARENT	Increase Parental Level	],},F11	REPLACEME
-Weather	PAUSE	Pause current page	P	REPLACEME
-TV Frontend	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
-Video	BROWSE	Change browsable in video manager	B	REPLACEME
-Welcome	SHOWSETTINGS	Show Mythshutdown settings	F11	REPLACEME
-Video	HOME	Go to the first video	Home	REPLACEME
-Video	FILTER	Open video filter dialog	F	REPLACEME
-Welcome	STARTXTERM	Open an Xterm window	F12	REPLACEME
-Music	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
-Music	BLANKSCR	Blank screen	5	REPLACEME
-Video	DELETE	Delete video	D	REPLACEME
-Music	THMBUP	Increase rating	9	REPLACEME
-Music	CYCLEVIS	Cycle visualizer mode	6	REPLACEME
-Teletext Menu	REVEAL	Reveal hidden Text	F8	REPLACEME
-Music	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
-TV Frontend	PLAYBACK	Play Program	P	REPLACEME
-News	FORCERETRIEVE	Force update news items	M	REPLACEME
-Video	DECPARENT	Decrease Parental Level	[,{,F10	REPLACEME
-News	RETRIEVENEWS	Update news items	I	REPLACEME
-News	CANCEL	Cancel news item updating	C	REPLACEME
-Teletext Menu	TOGGLEBACKGROUND	Toggle Background	F7	REPLACEME
-Teletext Menu	MENUWHITE	Menu White	F6	REPLACEME
-ITV Menu	MENURED	Menu Red	F2	REPLACEME
-ITV Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
-ITV Menu	MENUGREEN	Menu Green	F3	REPLACEME
-Teletext Menu	PREVSUBPAGE	Previous Subpage	Left	REPLACEME
-Teletext Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
-Teletext Menu	MENUGREEN	Menu Green	F3	REPLACEME
-Teletext Menu	NEXTSUBPAGE	Next Subpage	Right	REPLACEME
-Teletext Menu	MENUBLUE	Menu Blue	F5	REPLACEME
-Teletext Menu	TOGGLETT	Toggle Teletext	T	REPLACEME
-Teletext Menu	NEXTPAGE	Next Page	Down	REPLACEME
-TV Editing	LOADCOMMSKIP	Load cut list from commercial skips	Z,End	REPLACEME
-TV Editing	BIGJUMPREW	Jump back 10x the normal amount	,,<	REPLACEME
-TV Editing	BIGJUMPFWD	Jump forward 10x the normal amount	>,.	REPLACEME
-TV Playback	JUMPTODVDROOTMENU	Jump to the DVD Root Menu		REPLACEME
-Teletext Menu	MENURED	Menu Red	F2	REPLACEME
-TV Playback	SIGNALMON	Monitor Signal Quality	F7	REPLACEME
-Teletext Menu	PREVPAGE	Previous Page	Up	REPLACEME
-TV Editing	INVERTMAP	Invert Begin/End cut points	I	REPLACEME
-TV Playback	PLAY	Play	Ctrl+P	REPLACEME
-TV Editing	PREVCUT	Jump to the previous cut point	PgUp	REPLACEME
-TV Editing	NEXTCUT	Jump to the next cut point	PgDown	REPLACEME
-TV Playback	CYCLECOMMSKIPMODE	Cycle Commercial Skip mode		REPLACEME
-TV Playback	TOGGLESLEEP	Toggle the Sleep Timer	F8	REPLACEME
-TV Playback	JUMPREC	Display menu of recorded programs to jump to		REPLACEME
-TV Playback	FINDER	Show the Program Finder	#	REPLACEME
-TV Playback	ADJUSTSTRETCH	Turn on time stretch control	A	REPLACEME
-TV Editing	CLEARMAP	Clear editing cut points	C,Q,Home	REPLACEME
-TV Editing	TOGGLEEDIT	Exit out of Edit Mode	E	REPLACEME
-TV Playback	TOGGLESTRETCH	Toggle time stretch speed		REPLACEME
-TV Playback	TOGGLERECCONTROLS	Recording picture adjustments for this recorder	G	REPLACEME
-TV Playback	TOGGLEAUDIOSYNC	Turn on audio sync adjustment controls		REPLACEME
-TV Playback	TOGGLEEDIT	Start Edit Mode	E	REPLACEME
-TV Playback	SPEEDINC	Increase the playback speed	U	REPLACEME
-TV Playback	STRETCHDEC	Decrease time stretch speed		REPLACEME
-TV Playback	SPEEDDEC	Decrease the playback speed	J	REPLACEME
-TV Playback	TOGGLECHANCONTROLS	Recording picture adjustments for this channel	Ctrl+G	REPLACEME
-TV Playback	GUIDE	Show the Program Guide	S	REPLACEME
-TV Playback	JUMPPREV	Jump to previously played recording		REPLACEME
-TV Playback	QUEUETRANSCODE	Queue the current recording for transcoding	X	REPLACEME
-TV Playback	STRETCHINC	Increase time stretch speed		REPLACEME
-TV Playback	TOGGLEPICCONTROLS	Playback picture adjustments	F	REPLACEME
-TV Playback	PREVCC708	Previous ATSC CC track		REPLACEME
-TV Playback	NEXTCC708	Next ATSC CC track		REPLACEME
-TV Playback	NEXTCC	Next of any captions		REPLACEME
-TV Playback	NEXTSCAN	Next video scan overidemode		REPLACEME
-TV Playback	NEXTCC608	Next VBI CC track		REPLACEME
-TV Playback	PREVCC608	Previous VBI CC track		REPLACEME
-TV Playback	PREVAUDIO	Previous audio track	-	REPLACEME
-TV Playback	PREVSUBTITLE	Previous subtitle track		REPLACEME
-TV Playback	NEXTSUBTITLE	Next subtitle track		REPLACEME
-TV Playback	NEXTAUDIO	Next audio track	+	REPLACEME
-TV Playback	SELECTCC708_3	Display ATSC CC4		REPLACEME
-TV Playback	SELECTCC708_0	Display ATSC CC1		REPLACEME
-TV Playback	SELECTCC608_1	Display VBI CC2		REPLACEME
-TV Playback	SELECTAUDIO_0	Play audio track 1		REPLACEME
-TV Playback	SELECTCC608_2	Display VBI CC3		REPLACEME
-TV Playback	TOGGLETTM	Toggle Teletext Menu		REPLACEME
-TV Playback	SELECTSUBTITLE_1	Display subtitle 2		REPLACEME
-TV Playback	SELECTCC608_3	Display VBI CC4		REPLACEME
-TV Playback	SELECTCC708_1	Display ATSC CC2		REPLACEME
-TV Playback	SELECTCC708_2	Display ATSC CC3		REPLACEME
-TV Playback	SELECTAUDIO_1	Play audio track 2		REPLACEME
-TV Playback	SELECTSUBTITLE_0	Display subtitle 1		REPLACEME
-TV Playback	TOGGLETTC	Toggle Teletext Captions		REPLACEME
-TV Playback	SELECTCC608_0	Display VBI CC1		REPLACEME
-TV Playback	SWAPPIP	Swap PiP/Main	N	REPLACEME
-TV Playback	TOGGLEASPECT	Toggle the display aspect ratio	W	REPLACEME
-TV Playback	TOGGLECC708	Toggle ATSC CC		REPLACEME
-TV Playback	TOGGLECC608	Toggle VBI CC		REPLACEME
-TV Playback	TOGGLEPIPMODE	Toggle Picture-in-Picture mode	V	REPLACEME
-TV Playback	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
-TV Playback	TOGGLEPIPWINDOW	Toggle active PiP window	B	REPLACEME
-TV Playback	MUTE	Mute	|,\\\\,F9	REPLACEME
-TV Playback	TOGGLEBROWSE	Toggle channel browse mode	O	REPLACEME
-TV Playback	TOGGLESUBTITLE	Toggle Subtitles		REPLACEME
-TV Playback	VOLUMEUP	Volume up	],},F11	REPLACEME
-TV Playback	TOGGLECC	Toggle any captions	T	REPLACEME
-TV Playback	JUMPSTART	Jump to the start of the recording.	Ctrl+B	REPLACEME
-TV Playback	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
-TV Playback	SKIPCOMMERCIAL	Skip Commercial	Z,End	REPLACEME
-TV Playback	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
-TV Playback	SWITCHCARDS	Switch Capture Cards	Y	REPLACEME
-TV Playback	SKIPCOMMBACK	Skip Commercial (Reverse)	Q,Home	REPLACEME
-TV Playback	TOGGLEINPUTS	Toggle Inputs	C	REPLACEME
-TV Playback	FFWDSTICKY	Fast Forward (Sticky) or Forward one frame while paused	>,.	REPLACEME
-TV Playback	JUMPFFWD	Jump ahead	PgDown	REPLACEME
-TV Playback	PREVCHAN	Switch to the previous channel	H	REPLACEME
-TV Playback	JUMPBKMRK	Jump to bookmark	K	REPLACEME
-TV Playback	RWNDSTICKY	Rewind (Sticky) or Rewind one frame while paused	,,<	REPLACEME
-TV Playback	NEXTFAV	Switch to the next favorite channel	/	REPLACEME
-TV Playback	JUMPRWND	Jump back	PgUp	REPLACEME
-TV Playback	SEEKRWND	Rewind	Left	REPLACEME
-TV Playback	SEEKFFWD	Fast Forward	Right	REPLACEME
-TV Playback	CHANNELDOWN	Channel down	Down	REPLACEME
-TV Playback	CHANNELUP	Channel up	Up	REPLACEME
-TV Playback	ARBSEEK	Arbitrary Seek	*	REPLACEME
-TV Playback	DELETE	Delete Program	D	REPLACEME
-TV Playback	CLEAROSD	Clear OSD	Backspace	REPLACEME
-TV Frontend	DETAILS	Show program details	U	REPLACEME
-TV Frontend	CUSTOMEDIT	Edit Custom Record Rule	E	REPLACEME
-TV Frontend	UPCOMING	List upcoming episodes	O	REPLACEME
-TV Frontend	CHANUPDATE	Switch channels without exiting guide in Live TV mode.	X	REPLACEME
-TV Frontend	RANKDEC	Decrease program or channel rank	Left	REPLACEME
-TV Frontend	VIEWCARD	Switch Capture Card view	Y	REPLACEME
-TV Playback	PAUSE	Pause	P	REPLACEME
-TV Frontend	RANKINC	Increase program or channel rank	Right	REPLACEME
-TV Frontend	PAGERIGHT	Page the program guide right	>,.	REPLACEME
-TV Frontend	PAGELEFT	Page the program guide left	,,<	REPLACEME
-TV Frontend	NEXTFAV	Toggle showing all channels or just favorites in the program guide.	/	REPLACEME
-Gallery	DELETE	Delete marked images or current image if none are marked	D	REPLACEME
-TV Frontend	DAYRIGHT	Page the program guide forward one day	End,1	REPLACEME
-Gallery	MARK	Mark image	T	REPLACEME
-Game	TOGGLEFAV	Toggle the current game as a favorite	?,/	REPLACEME
-TV Frontend	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
-TV Frontend	DAYLEFT	Page the program guide back one day	Home,7	REPLACEME
-Music	PREVTRACK	Move to the previous track	,,<,Q,Home	REPLACEME
-Game	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
-Music	DELETE	Delete track from playlist	D	REPLACEME
-Gallery	INFO	Toggle Showing Information about Image	I	REPLACEME
-Game	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
-Music	REFRESH	Refresh music tree	8	REPLACEME
-Music	NEXTTRACK	Move to the next track	>,.,Z,End	REPLACEME
-Music	FILTER	Filter All My Music	F	REPLACEME
-Music	THMBDOWN	Decrease rating	7	REPLACEME
diff --git a/abs/core/live-installer/templates/settings/default_1/settings.txt b/abs/core/live-installer/templates/settings/default_1/settings.txt
deleted file mode 100644
index 8c3a391..0000000
--- a/abs/core/live-installer/templates/settings/default_1/settings.txt
+++ /dev/null
@@ -1,320 +0,0 @@
-value	data	hostname
-AC3PassThru	0	REPLACEME
-AggressiveSoundcardBuffer	0	REPLACEME
-AllowQuitShutdown	3	REPLACEME
-AltClearSavedPosition	1	REPLACEME
-AspectOverride	0	REPLACEME
-AudioNag	1	REPLACEME
-AudioOutputDevice	/dev/dsp	REPLACEME
-AutoCommercialSkip	2	REPLACEME
-AutoLookupCD	1	REPLACEME
-AutomaticSetWatched	0	REPLACEME
-AutoPlayCD	0	REPLACEME
-BackendServerPort	6543	REPLACEME
-BackendStatusPort	6544	REPLACEME
-CCBackground	0	REPLACEME
-CDBlankType	fast	REPLACEME
-CDCreateDir	1	REPLACEME
-CDDevice	/dev/cdrom	REPLACEME
-CDDiskSize	1	REPLACEME
-CDWriterEnabled	0	REPLACEME
-CDWriteSpeed	0	REPLACEME
-ChannelFormat	<num> <sign>	REPLACEME
-ChannelOrdering	channum	REPLACEME
-chanPerPage	5	REPLACEME
-ClearSavedPosition	1	REPLACEME
-CommNotifyAmount	0	REPLACEME
-CommRewindAmount	0	REPLACEME
-CustomFilters		REPLACEME
-DateFormat	ddd MMM d	REPLACEME
-DecodeExtraAudio	1	REPLACEME
-Default MythVideo View	1	REPLACEME
-DefaultCCMode	0	REPLACEME
-DefaultRipQuality	0	REPLACEME
-DefaultTVChannel	3	REPLACEME
-Deinterlace	1	REPLACEME
-DeinterlaceFilter	kerneldeint	REPLACEME
-DisplayGroupDefaultView	0	REPLACEME
-DisplayGroupTitleSort	0	REPLACEME
-DisplayRecGroup	Default	REPLACEME
-DispRecGroupAsAllProg	0	REPLACEME
-DTSPassThru	0	REPLACEME
-DVDDeviceLocation	/dev/dvd	REPLACEME
-DVDOnInsertDVD	1	REPLACEME
-DVDRipLocation	/data/media/tmp	REPLACEME
-EjectCDAfterRipping	1	REPLACEME
-EnableMHEG	0	REPLACEME
-EnableXbox	0	REPLACEME
-EnableXbox	0	REPLACEME
-EncoderType	ogg	REPLACEME
-EndOfRecordingExitPrompt	1	REPLACEME
-EPGFillType	10	REPLACEME
-EPGScrollType	1	REPLACEME
-EPGShowCategoryColors	1	REPLACEME
-EPGShowCategoryText	1	REPLACEME
-EPGShowChannelIcon	1	REPLACEME
-EPGShowFavorites	0	REPLACEME
-ExactSeeking	0	REPLACEME
-FFRewReposTime	100	REPLACEME
-FFRewReverse	1	REPLACEME
-FilenameTemplate	ARTIST/ALBUM/TRACK-TITLE	REPLACEME
-GalleryDir	/data/media/images	REPLACEME
-GalleryImportDirs	/mnt/cdrom:/mnt/camera	REPLACEME
-GalleryMoviePlayerCmd	mplayer -fs %s	REPLACEME
-GalleryOverlayCaption	0	REPLACEME
-GalleryRecursiveSlideshow	1	REPLACEME
-GallerySortOrder	20	REPLACEME
-GalleryThumbnailLocation	1	REPLACEME
-GameAllTreeLevels	system gamename	REPLACEME
-GameFavTreeLevels	gamename	REPLACEME
-GeneratePreviewPixmaps	0	REPLACEME
-GuiHeight	0	REPLACEME
-GuiOffsetX	0	REPLACEME
-GuiOffsetY	0	REPLACEME
-GuiSizeForTV	0	REPLACEME
-GuiVidModeResolution	640x480	REPLACEME
-GuiWidth	0	REPLACEME
-HideMouseCursor	1	REPLACEME
-HorizScanPercentage	0	REPLACEME
-Ignore_ID3	0	REPLACEME
-IndividualMuteControl	0	REPLACEME
-IntelliLastPlayWeight	25	REPLACEME
-IntelliPlayCountWeight	25	REPLACEME
-IntelliRandomWeight	15	REPLACEME
-IntelliRatingWeight	35	REPLACEME
-ISO639Language0	eng	REPLACEME
-ISO639Language1	eng	REPLACEME
-JobAllowCommFlag	1	REPLACEME
-JobAllowTranscode	1	REPLACEME
-JobQueueCheckFrequency	60	REPLACEME
-JobQueueCPU	0	REPLACEME
-JobQueueMaxSimultaneousJobs	1	REPLACEME
-JobQueueWindowEnd	23:59	REPLACEME
-JobQueueWindowStart	00:00	REPLACEME
-KeyboardAccelerators	1	REPLACEME
-Language	EN	REPLACEME
-LastMusicPlaylistPush	0	REPLACEME
-LCDBacklightOn	1	REPLACEME
-LCDBigClock	0	REPLACEME
-LCDEnable	0	REPLACEME
-LCDHeartBeatOn	0	REPLACEME
-LCDKeyString	ABCDEF	REPLACEME
-LCDPopupTime	5	REPLACEME
-LCDShowChannel	1	REPLACEME
-LCDShowGeneric	1	REPLACEME
-LCDShowMenu	1	REPLACEME
-LCDShowMusic	1	REPLACEME
-LCDShowMusicItems	ArtistTitle	REPLACEME
-LCDShowRecStatus	0	REPLACEME
-LCDShowTime	1	REPLACEME
-LCDShowVolume	1	REPLACEME
-LircKeyPressedApp		REPLACEME
-ListAsShuffled	0	REPLACEME
-LiveTVInAllPrograms	0	REPLACEME
-LogCleanDays	14	REPLACEME
-LogCleanDays	14	REPLACEME
-LogCleanEnabled	0	REPLACEME
-LogCleanEnabled	0	REPLACEME
-LogCleanMax	30	REPLACEME
-LogCleanMax	30	REPLACEME
-LogCleanPeriod	14	REPLACEME
-LogCleanPeriod	14	REPLACEME
-LogMaxCount	100	REPLACEME
-LogMaxCount	100	REPLACEME
-LogPrintLevel	8	REPLACEME
-LogPrintLevel	8	REPLACEME
-LongChannelFormat	<num> <name>	REPLACEME
-MasterMixerVolume	70	REPLACEME
-MenuTheme	MythVantage-menu	REPLACEME
-MixerControl	PCM	REPLACEME
-MixerDevice	/dev/mixer	REPLACEME
-MonitorDrives	0	REPLACEME
-MovieDataCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D	REPLACEME
-MovieListCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no	REPLACEME
-MoviePosterCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P	REPLACEME
-Mp3UseVBR	0	REPLACEME
-MTDac3Flag	0	REPLACEME
-MTDConcurrentTranscodes	1	REPLACEME
-MTDLogFlag	0	REPLACEME
-MTDNiceLevel	20	REPLACEME
-MTDPort	2442	REPLACEME
-MTDRipSize	0	REPLACEME
-MTDxvidFlag	1	REPLACEME
-MusicAudioDevice	default	REPLACEME
-MusicLocation	/data/media/audio	REPLACEME
-MusicShowRatings	0	REPLACEME
-MythArchiveAlwaysUseMythTranscode	1	REPLACEME
-MythArchiveChapterMenuAR	Video	REPLACEME
-MythArchiveCopyRemoteFiles	1	REPLACEME
-MythArchiveDateFormat	%a  %b  %d	REPLACEME
-MythArchiveDvdauthorCmd	dvdauthor	REPLACEME
-MythArchiveDVDLocation	/dev/dvd	REPLACEME
-MythArchiveEncodeToAc3	1	REPLACEME
-MythArchiveFfmpegCmd	ffmpeg	REPLACEME
-MythArchiveFileFilter	*.mpg *.mov *.avi *.mpeg *.nuv	REPLACEME
-MythArchiveGrowisofsCmd	growisofs	REPLACEME
-MythArchiveMainMenuAR	16:9	REPLACEME
-MythArchiveMkisofsCmd	mkisofs	REPLACEME
-MythArchiveMpeg2encCmd	mpeg2enc	REPLACEME
-MythArchiveMplexCmd	mplex	REPLACEME
-MythArchivePng2yuvCmd	png2yuv	REPLACEME
-MythArchiveShareDir	/usr/local/share/mythtv/mytharchive/	REPLACEME
-MythArchiveSpumuxCmd	spumux	REPLACEME
-MythArchiveTcrequantCmd	tcrequant	REPLACEME
-MythArchiveTempDir	/data/media/tmp	REPLACEME
-MythArchiveTimeFormat	%I:%M %p	REPLACEME
-MythArchiveUseFIFO	1	REPLACEME
-MythArchiveVideoFormat	NTSC	REPLACEME
-MythControlsVolume	1	REPLACEME
-mythdvd.DVDPlayerCommand	Internal	REPLACEME
-mythvideo.db_folder_view	1	REPLACEME
-mythvideo.ImageCacheSize	50	REPLACEME
-mythvideo.sort_ignores_case	1	REPLACEME
-NetworkControlEnabled	1	REPLACEME
-NetworkControlPort	6546	REPLACEME
-NonID3FileNameFormat	GENRE/ARTIST/ALBUM/TRACK_TITLE	REPLACEME
-NoPromptOnExit	0	REPLACEME
-NoWhitespace	0	REPLACEME
-OnlyImportNewMusic	0	REPLACEME
-OSDCC708CapitalsFont	FreeMono.ttf	REPLACEME
-OSDCC708CapitalsItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708CasualFont	FreeMono.ttf	REPLACEME
-OSDCC708CasualItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708CursiveFont	FreeMono.ttf	REPLACEME
-OSDCC708CursiveItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708DefaultFontType	MonoSerif	REPLACEME
-OSDCC708MonoSansSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSansSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSansSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSansSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708TextZoom	100	REPLACEME
-OSDCCFont	FreeMono.ttf	REPLACEME
-OSDFont	FreeMono.ttf	REPLACEME
-OSDGeneralTimeout	2	REPLACEME
-OSDNotifyTimeout	6	REPLACEME
-OSDProgramInfoTimeout	3	REPLACEME
-OSDTheme	Gray-OSD	REPLACEME
-OSDThemeFontSizeType	default	REPLACEME
-ParanoiaLevel	Full	REPLACEME
-PassThruOutputDevice	Default	REPLACEME
-PCMMixerVolume	70	REPLACEME
-PersistentBrowseMode	1	REPLACEME
-PIPLocation	0	REPLACEME
-PlaybackBoxStartInTitle	1	REPLACEME
-PlaybackExitPrompt	2	REPLACEME
-PlaybackPreview	1	REPLACEME
-PlaybackPreviewLowCPU	1	REPLACEME
-PlayBoxEpisodeSort	Date	REPLACEME
-PlayBoxOrdering	1	REPLACEME
-PlayBoxShading	0	REPLACEME
-PlayBoxTransparency	1	REPLACEME
-PlayMode	none	REPLACEME
-PostCDRipScript		REPLACEME
-PreferredMPEG2Decoder	ffmpeg	REPLACEME
-PreviewFromBookmark	1	REPLACEME
-PVR350EPGAlphaValue	164	REPLACEME
-PVR350InternalAudioOnly	0	REPLACEME
-PVR350OutputEnable	0	REPLACEME
-PVR350VideoDev	/dev/video16	REPLACEME
-QtFontBig	25	REPLACEME
-QtFontMedium	16	REPLACEME
-QtFontSmall	12	REPLACEME
-QueryInitialFilter	0	REPLACEME
-RandomTheme	0	REPLACEME
-RealtimePriority	1	REPLACEME
-RecordFilePrefix	/data/media/video/recordings	REPLACEME
-RememberRecGroup	1	REPLACEME
-RepeatMode	all	REPLACEME
-RunFrontendInWindow	0	REPLACEME
-SelChangeRecThreshold	16	REPLACEME
-SelectChangesChannel	1	REPLACEME
-ServiceMythWEB	0	REPLACEME
-ServiceNFS	0	REPLACEME
-ServiceSamba	0	REPLACEME
-SetupPinCodeRequired	0	REPLACEME
-ShortDateFormat	M/d	REPLACEME
-ShowGroupInfo	0	REPLACEME
-ShowWholeTree	1	REPLACEME
-SlideshowBackground		REPLACEME
-SlideshowDelay	5	REPLACEME
-SlideshowOpenGLTransition	none	REPLACEME
-SlideshowOpenGLTransitionLength	2000	REPLACEME
-SlideshowTransition	none	REPLACEME
-SmartChannelChange	0	REPLACEME
-SmartForward	0	REPLACEME
-StickyKeys	1	REPLACEME
-Style	Windows	REPLACEME
-SubTitleCommand	-sid %s	REPLACEME
-TagSeparator	 - 	REPLACEME
-Theme	basic-blue	REPLACEME
-ThemeFontSizeType	default	REPLACEME
-ThemePainter	qt	REPLACEME
-TimeFormat	h:mm AP	REPLACEME
-timePerPage	4	REPLACEME
-TitlePlayCommand	mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c	REPLACEME
-TranscodeCommand	transcode	REPLACEME
-TreeLevels	splitartist artist album title	REPLACEME
-TVVidModeForceAspect	0.0	REPLACEME
-TVVidModeForceAspect0	0.0	REPLACEME
-TVVidModeForceAspect1	0.0	REPLACEME
-TVVidModeForceAspect2	0.0	REPLACEME
-TVVidModeRefreshRate	0	REPLACEME
-TVVidModeRefreshRate0	0	REPLACEME
-TVVidModeRefreshRate1	0	REPLACEME
-TVVidModeRefreshRate2	0	REPLACEME
-TVVidModeResolution	640x480	REPLACEME
-TVVidModeResolution0	640x480	REPLACEME
-TVVidModeResolution1	640x480	REPLACEME
-TVVidModeResolution2	640x480	REPLACEME
-UDPNotifyPort	6948	REPLACEME
-UnknownCategory	Unknown	REPLACEME
-UnknownTitle	Unknown	REPLACEME
-upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1	dee5b0fe-7087-4960-8794-428d3e01a61f	REPLACEME
-UseArrowAccels	1	REPLACEME
-UseOutputPictureControls	1	REPLACEME
-UseVideoModes	0	REPLACEME
-UseVideoTimebase	0	REPLACEME
-UseVirtualKeyboard	1	REPLACEME
-VCDDeviceLocation	/dev/cdrom	REPLACEME
-VCDPlayerCommand	mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv	REPLACEME
-VertScanPercentage	0	REPLACEME
-VideoAggressivePC	0	REPLACEME
-VideoArtworkDir	/data/media/images/posters	REPLACEME
-VideoBrowserNoDB	0	REPLACEME
-VideoDefaultParentalLevel	4	REPLACEME
-VideoGalleryAspectRatio	1	REPLACEME
-VideoGalleryColsPerPage	4	REPLACEME
-VideoGalleryNoDB	0	REPLACEME
-VideoGalleryRowsPerPage	3	REPLACEME
-VideoGallerySubtitle	1	REPLACEME
-VideoListUnknownFiletypes	1	REPLACEME
-VideoNewBrowsable	1	REPLACEME
-VideoDefaultPlayer	Internal	REPLACEME
-VideoStartupDir	/data/media/video/movies	REPLACEME
-VideoTreeLoadMetaData	1	REPLACEME
-VideoTreeNoDB	0	REPLACEME
-VidModeHeight0	0	REPLACEME
-VidModeHeight1	0	REPLACEME
-VidModeHeight2	0	REPLACEME
-VidModeWidth0	0	REPLACEME
-VidModeWidth1	0	REPLACEME
-VidModeWidth2	0	REPLACEME
-VisualCycleOnSongChange	0	REPLACEME
-VisualMode	Random	REPLACEME
-VisualModeDelay	0	REPLACEME
-VisualScaleHeight	1	REPLACEME
-VisualScaleWidth	1	REPLACEME
-WatchTVGuide	0	REPLACEME
-WebBrowserCommand	/usr/local/bin/mythbrowser	REPLACEME
-WebBrowserHideScrollbars	0	REPLACEME
-WebBrowserScrollMode	1	REPLACEME
-WebBrowserScrollSpeed	4	REPLACEME
-WebBrowserZoomLevel	20	REPLACEME
-XScanDisplacement	0	REPLACEME
-YScanDisplacement	0	REPLACEME
-HaltCommand	sudo /sbin/poweroff	REPLACEME
-RebootCommand	sudo /sbin/reboot	REPLACEME
diff --git a/abs/core/live-installer/templates/settings/default_2/keybindings.txt b/abs/core/live-installer/templates/settings/default_2/keybindings.txt
deleted file mode 100644
index f82f2d2..0000000
--- a/abs/core/live-installer/templates/settings/default_2/keybindings.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-context	action	description	keylist	hostname
-Music	FFWD	Fast forward	PgDown	REPLACEME
-Music	STOP	Stop playback	O	REPLACEME
-Music	MUTE	Mute	|,\\\\,F9	REPLACEME
-Gallery	SCROLLUP	Scroll image up	2	REPLACEME
-Music	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
-Music	VOLUMEUP	Volume up	],},F11	REPLACEME
-qt	DELETE	Delete	D	REPLACEME
-Music	RWND	Rewind	PgUp	REPLACEME
-qt	EDIT	Edit	E	REPLACEME
-Music	PAUSE	Pause/Start playback	P	REPLACEME
-Gallery	RECENTER	Recenter image	5	REPLACEME
-Gallery	FULLSIZE	Full-size (un-zoom) image	0	REPLACEME
-Gallery	LOWRIGHT	Go to the lower-right corner of the image	PgDown	REPLACEME
-Gallery	SCROLLRIGHT	Scroll image right	6	REPLACEME
-Gallery	MENU	Toggle activating menu in thumbnail view	M	REPLACEME
-Gallery	SCROLLDOWN	Scroll image down	8	REPLACEME
-Gallery	ZOOMIN	Zoom image in	9	REPLACEME
-Gallery	UPLEFT	Go to the upper-left corner of the image	PgUp	REPLACEME
-Gallery	RANDOMSHOW	Start Random Slideshow in thumbnail view	R	REPLACEME
-Gallery	ROTLEFT	Rotate image left 90 degrees	[,1	REPLACEME
-Gallery	SLIDESHOW	Start Slideshow in thumbnail view	S	REPLACEME
-Gallery	ROTRIGHT	Rotate image right 90 degrees	],3	REPLACEME
-Gallery	END	Go to the last image in thumbnail view	End	REPLACEME
-Gallery	HOME	Go to the first image in thumbnail view	Home	REPLACEME
-Gallery	SCROLLLEFT	Scroll image left	4	REPLACEME
-Gallery	PLAY	Start/Stop Slideshow	P	REPLACEME
-NetFlix	REMOVE	Removes movie from queue	D	REPLACEME
-Archive	TOGGLECUT	Toggle use cut list state for selected program	C	REPLACEME
-Gallery	ZOOMOUT	Zoom image out	7	REPLACEME
-NetFlix	MOVETOTOP	Moves movie to top of queue	1	REPLACEME
-Global	DOWN	Down Arrow	Down	REPLACEME
-ITV Menu	MENUTEXT	Menu Text	F7	REPLACEME
-ITV Menu	TEXTEXIT	Menu Exit	F6	REPLACEME
-Global	LEFT	Left Arrow	Left	REPLACEME
-Global	RIGHT	Right Arrow	Right	REPLACEME
-Global	UP	Up Arrow	Up	REPLACEME
-Global	MENU	Pop-up menu	M	REPLACEME
-Global	PREVVIEW	Previous View	Home	REPLACEME
-Global	ESCAPE	Escape	Esc	REPLACEME
-Global	PAGEUP	Page Up	PgUp	REPLACEME
-Global	SELECT	Select	Return,Enter,Space	REPLACEME
-Global	HELP	Help	F1	REPLACEME
-Global	INFO	More information	I	REPLACEME
-Global	NEXTVIEW	Next View	End	REPLACEME
-ITV Menu	MENUBLUE	Menu Blue	F5	REPLACEME
-Global	PAGEDOWN	Page Down	PgDown	REPLACEME
-Global	EJECT	Eject Removable Media		REPLACEME
-Global	3	3	3	REPLACEME
-Global	1	1	1	REPLACEME
-Global	6	6	6	REPLACEME
-Global	0	0	0	REPLACEME
-Global	2	2	2	REPLACEME
-Global	4	4	4	REPLACEME
-TV Frontend	DELETE	Delete Program	D	REPLACEME
-Global	8	8	8	REPLACEME
-Global	7	7	7	REPLACEME
-TV Frontend	PAGEDOWN	Page Down	9	REPLACEME
-TV Frontend	PAGEUP	Page Up	3	REPLACEME
-Global	5	5	5	REPLACEME
-TV Frontend	CHANGERECGROUP	Change Recording Group		REPLACEME
-Global	9	9	9	REPLACEME
-Video	END	Go to the last video	End	REPLACEME
-Video	INCPARENT	Increase Parental Level	],},F11	REPLACEME
-Weather	PAUSE	Pause current page	P	REPLACEME
-TV Frontend	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
-Video	BROWSE	Change browsable in video manager	B	REPLACEME
-Welcome	SHOWSETTINGS	Show Mythshutdown settings	F11	REPLACEME
-Video	HOME	Go to the first video	Home	REPLACEME
-Video	FILTER	Open video filter dialog	F	REPLACEME
-Welcome	STARTXTERM	Open an Xterm window	F12	REPLACEME
-Music	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
-Music	BLANKSCR	Blank screen	5	REPLACEME
-Video	DELETE	Delete video	D	REPLACEME
-Music	THMBUP	Increase rating	9	REPLACEME
-Music	CYCLEVIS	Cycle visualizer mode	6	REPLACEME
-Teletext Menu	REVEAL	Reveal hidden Text	F8	REPLACEME
-Music	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
-TV Frontend	PLAYBACK	Play Program	P	REPLACEME
-News	FORCERETRIEVE	Force update news items	M	REPLACEME
-Video	DECPARENT	Decrease Parental Level	[,{,F10	REPLACEME
-News	RETRIEVENEWS	Update news items	I	REPLACEME
-News	CANCEL	Cancel news item updating	C	REPLACEME
-Teletext Menu	TOGGLEBACKGROUND	Toggle Background	F7	REPLACEME
-Teletext Menu	MENUWHITE	Menu White	F6	REPLACEME
-ITV Menu	MENURED	Menu Red	F2	REPLACEME
-ITV Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
-ITV Menu	MENUGREEN	Menu Green	F3	REPLACEME
-Teletext Menu	PREVSUBPAGE	Previous Subpage	Left	REPLACEME
-Teletext Menu	MENUYELLOW	Menu Yellow	F4	REPLACEME
-Teletext Menu	MENUGREEN	Menu Green	F3	REPLACEME
-Teletext Menu	NEXTSUBPAGE	Next Subpage	Right	REPLACEME
-Teletext Menu	MENUBLUE	Menu Blue	F5	REPLACEME
-Teletext Menu	TOGGLETT	Toggle Teletext	T	REPLACEME
-Teletext Menu	NEXTPAGE	Next Page	Down	REPLACEME
-TV Editing	LOADCOMMSKIP	Load cut list from commercial skips	Z,End	REPLACEME
-TV Editing	BIGJUMPREW	Jump back 10x the normal amount	,,<	REPLACEME
-TV Editing	BIGJUMPFWD	Jump forward 10x the normal amount	>,.	REPLACEME
-TV Playback	JUMPTODVDROOTMENU	Jump to the DVD Root Menu		REPLACEME
-Teletext Menu	MENURED	Menu Red	F2	REPLACEME
-TV Playback	SIGNALMON	Monitor Signal Quality	F7	REPLACEME
-Teletext Menu	PREVPAGE	Previous Page	Up	REPLACEME
-TV Editing	INVERTMAP	Invert Begin/End cut points	I	REPLACEME
-TV Playback	PLAY	Play	Ctrl+P	REPLACEME
-TV Editing	PREVCUT	Jump to the previous cut point	PgUp	REPLACEME
-TV Editing	NEXTCUT	Jump to the next cut point	PgDown	REPLACEME
-TV Playback	CYCLECOMMSKIPMODE	Cycle Commercial Skip mode		REPLACEME
-TV Playback	TOGGLESLEEP	Toggle the Sleep Timer	F8	REPLACEME
-TV Playback	JUMPREC	Display menu of recorded programs to jump to		REPLACEME
-TV Playback	FINDER	Show the Program Finder	#	REPLACEME
-TV Playback	ADJUSTSTRETCH	Turn on time stretch control	A	REPLACEME
-TV Editing	CLEARMAP	Clear editing cut points	C,Q,Home	REPLACEME
-TV Editing	TOGGLEEDIT	Exit out of Edit Mode	E	REPLACEME
-TV Playback	TOGGLESTRETCH	Toggle time stretch speed		REPLACEME
-TV Playback	TOGGLERECCONTROLS	Recording picture adjustments for this recorder	G	REPLACEME
-TV Playback	TOGGLEAUDIOSYNC	Turn on audio sync adjustment controls		REPLACEME
-TV Playback	TOGGLEEDIT	Start Edit Mode	E	REPLACEME
-TV Playback	SPEEDINC	Increase the playback speed	U	REPLACEME
-TV Playback	STRETCHDEC	Decrease time stretch speed		REPLACEME
-TV Playback	SPEEDDEC	Decrease the playback speed	J	REPLACEME
-TV Playback	TOGGLECHANCONTROLS	Recording picture adjustments for this channel	Ctrl+G	REPLACEME
-TV Playback	GUIDE	Show the Program Guide	S	REPLACEME
-TV Playback	JUMPPREV	Jump to previously played recording		REPLACEME
-TV Playback	QUEUETRANSCODE	Queue the current recording for transcoding	X	REPLACEME
-TV Playback	STRETCHINC	Increase time stretch speed		REPLACEME
-TV Playback	TOGGLEPICCONTROLS	Playback picture adjustments	F	REPLACEME
-TV Playback	PREVCC708	Previous ATSC CC track		REPLACEME
-TV Playback	NEXTCC708	Next ATSC CC track		REPLACEME
-TV Playback	NEXTCC	Next of any captions		REPLACEME
-TV Playback	NEXTSCAN	Next video scan overidemode		REPLACEME
-TV Playback	NEXTCC608	Next VBI CC track		REPLACEME
-TV Playback	PREVCC608	Previous VBI CC track		REPLACEME
-TV Playback	PREVAUDIO	Previous audio track	-	REPLACEME
-TV Playback	PREVSUBTITLE	Previous subtitle track		REPLACEME
-TV Playback	NEXTSUBTITLE	Next subtitle track		REPLACEME
-TV Playback	NEXTAUDIO	Next audio track	+	REPLACEME
-TV Playback	SELECTCC708_3	Display ATSC CC4		REPLACEME
-TV Playback	SELECTCC708_0	Display ATSC CC1		REPLACEME
-TV Playback	SELECTCC608_1	Display VBI CC2		REPLACEME
-TV Playback	SELECTAUDIO_0	Play audio track 1		REPLACEME
-TV Playback	SELECTCC608_2	Display VBI CC3		REPLACEME
-TV Playback	TOGGLETTM	Toggle Teletext Menu		REPLACEME
-TV Playback	SELECTSUBTITLE_1	Display subtitle 2		REPLACEME
-TV Playback	SELECTCC608_3	Display VBI CC4		REPLACEME
-TV Playback	SELECTCC708_1	Display ATSC CC2		REPLACEME
-TV Playback	SELECTCC708_2	Display ATSC CC3		REPLACEME
-TV Playback	SELECTAUDIO_1	Play audio track 2		REPLACEME
-TV Playback	SELECTSUBTITLE_0	Display subtitle 1		REPLACEME
-TV Playback	TOGGLETTC	Toggle Teletext Captions		REPLACEME
-TV Playback	SELECTCC608_0	Display VBI CC1		REPLACEME
-TV Playback	SWAPPIP	Swap PiP/Main	N	REPLACEME
-TV Playback	TOGGLEASPECT	Toggle the display aspect ratio	W	REPLACEME
-TV Playback	TOGGLECC708	Toggle ATSC CC		REPLACEME
-TV Playback	TOGGLECC608	Toggle VBI CC		REPLACEME
-TV Playback	TOGGLEPIPMODE	Toggle Picture-in-Picture mode	V	REPLACEME
-TV Playback	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
-TV Playback	TOGGLEPIPWINDOW	Toggle active PiP window	B	REPLACEME
-TV Playback	MUTE	Mute	|,\\\\,F9	REPLACEME
-TV Playback	TOGGLEBROWSE	Toggle channel browse mode	O	REPLACEME
-TV Playback	TOGGLESUBTITLE	Toggle Subtitles		REPLACEME
-TV Playback	VOLUMEUP	Volume up	],},F11	REPLACEME
-TV Playback	TOGGLECC	Toggle any captions	T	REPLACEME
-TV Playback	JUMPSTART	Jump to the start of the recording.	Ctrl+B	REPLACEME
-TV Playback	TOGGLERECORD	Toggle recording status of current program	R	REPLACEME
-TV Playback	SKIPCOMMERCIAL	Skip Commercial	Z,End	REPLACEME
-TV Playback	VOLUMEDOWN	Volume down	[,{,F10	REPLACEME
-TV Playback	SWITCHCARDS	Switch Capture Cards	Y	REPLACEME
-TV Playback	SKIPCOMMBACK	Skip Commercial (Reverse)	Q,Home	REPLACEME
-TV Playback	TOGGLEINPUTS	Toggle Inputs	C	REPLACEME
-TV Playback	FFWDSTICKY	Fast Forward (Sticky) or Forward one frame while paused	>,.	REPLACEME
-TV Playback	JUMPFFWD	Jump ahead	PgDown	REPLACEME
-TV Playback	PREVCHAN	Switch to the previous channel	H	REPLACEME
-TV Playback	JUMPBKMRK	Jump to bookmark	K	REPLACEME
-TV Playback	RWNDSTICKY	Rewind (Sticky) or Rewind one frame while paused	,,<	REPLACEME
-TV Playback	NEXTFAV	Switch to the next favorite channel	/	REPLACEME
-TV Playback	JUMPRWND	Jump back	PgUp	REPLACEME
-TV Playback	SEEKRWND	Rewind	Left	REPLACEME
-TV Playback	SEEKFFWD	Fast Forward	Right	REPLACEME
-TV Playback	CHANNELDOWN	Channel down	Down	REPLACEME
-TV Playback	CHANNELUP	Channel up	Up	REPLACEME
-TV Playback	ARBSEEK	Arbitrary Seek	*	REPLACEME
-TV Playback	DELETE	Delete Program	D	REPLACEME
-TV Playback	CLEAROSD	Clear OSD	Backspace	REPLACEME
-TV Frontend	DETAILS	Show program details	U	REPLACEME
-TV Frontend	CUSTOMEDIT	Edit Custom Record Rule	E	REPLACEME
-TV Frontend	UPCOMING	List upcoming episodes	O	REPLACEME
-TV Frontend	CHANUPDATE	Switch channels without exiting guide in Live TV mode.	X	REPLACEME
-TV Frontend	RANKDEC	Decrease program or channel rank	Left	REPLACEME
-TV Frontend	VIEWCARD	Switch Capture Card view	Y	REPLACEME
-TV Playback	PAUSE	Pause	P	REPLACEME
-TV Frontend	RANKINC	Increase program or channel rank	Right	REPLACEME
-TV Frontend	PAGERIGHT	Page the program guide right	>,.	REPLACEME
-TV Frontend	PAGELEFT	Page the program guide left	,,<	REPLACEME
-TV Frontend	NEXTFAV	Toggle showing all channels or just favorites in the program guide.	/	REPLACEME
-Gallery	DELETE	Delete marked images or current image if none are marked	D	REPLACEME
-TV Frontend	DAYRIGHT	Page the program guide forward one day	End,1	REPLACEME
-Gallery	MARK	Mark image	T	REPLACEME
-Game	TOGGLEFAV	Toggle the current game as a favorite	?,/	REPLACEME
-TV Frontend	TOGGLEFAV	Toggle the current channel as a favorite	?	REPLACEME
-TV Frontend	DAYLEFT	Page the program guide back one day	Home,7	REPLACEME
-Music	PREVTRACK	Move to the previous track	,,<,Q,Home	REPLACEME
-Game	INCSEARCHNEXT	Incremental search find next match	Ctrl+N	REPLACEME
-Music	DELETE	Delete track from playlist	D	REPLACEME
-Gallery	INFO	Toggle Showing Information about Image	I	REPLACEME
-Game	INCSEARCH	Show incremental search dialog	Ctrl+S	REPLACEME
-Music	REFRESH	Refresh music tree	8	REPLACEME
-Music	NEXTTRACK	Move to the next track	>,.,Z,End	REPLACEME
-Music	FILTER	Filter All My Music	F	REPLACEME
-Music	THMBDOWN	Decrease rating	7	REPLACEME
diff --git a/abs/core/live-installer/templates/settings/default_2/settings.txt b/abs/core/live-installer/templates/settings/default_2/settings.txt
deleted file mode 100644
index 106be04..0000000
--- a/abs/core/live-installer/templates/settings/default_2/settings.txt
+++ /dev/null
@@ -1,320 +0,0 @@
-value	data	hostname
-AC3PassThru	0	REPLACEME
-AggressiveSoundcardBuffer	0	REPLACEME
-AllowQuitShutdown	3	REPLACEME
-AltClearSavedPosition	1	REPLACEME
-AspectOverride	0	REPLACEME
-AudioNag	1	REPLACEME
-AudioOutputDevice	/dev/dsp	REPLACEME
-AutoCommercialSkip	2	REPLACEME
-AutoLookupCD	1	REPLACEME
-AutomaticSetWatched	0	REPLACEME
-AutoPlayCD	0	REPLACEME
-BackendServerPort	6543	REPLACEME
-BackendStatusPort	6544	REPLACEME
-CCBackground	0	REPLACEME
-CDBlankType	fast	REPLACEME
-CDCreateDir	1	REPLACEME
-CDDevice	/dev/cdrom	REPLACEME
-CDDiskSize	1	REPLACEME
-CDWriterEnabled	0	REPLACEME
-CDWriteSpeed	0	REPLACEME
-ChannelFormat	<num> <sign>	REPLACEME
-ChannelOrdering	channum	REPLACEME
-chanPerPage	5	REPLACEME
-ClearSavedPosition	1	REPLACEME
-CommNotifyAmount	0	REPLACEME
-CommRewindAmount	0	REPLACEME
-CustomFilters		REPLACEME
-DateFormat	ddd MMM d	REPLACEME
-DecodeExtraAudio	1	REPLACEME
-Default MythVideo View	1	REPLACEME
-DefaultCCMode	0	REPLACEME
-DefaultRipQuality	0	REPLACEME
-DefaultTVChannel	3	REPLACEME
-Deinterlace	1	REPLACEME
-DeinterlaceFilter	kerneldeint	REPLACEME
-DisplayGroupDefaultView	0	REPLACEME
-DisplayGroupTitleSort	0	REPLACEME
-DisplayRecGroup	Default	REPLACEME
-DispRecGroupAsAllProg	0	REPLACEME
-DTSPassThru	0	REPLACEME
-DVDDeviceLocation	/dev/dvd	REPLACEME
-DVDOnInsertDVD	1	REPLACEME
-DVDRipLocation	/data/media/tmp	REPLACEME
-EjectCDAfterRipping	1	REPLACEME
-EnableMHEG	0	REPLACEME
-EnableXbox	0	REPLACEME
-EnableXbox	0	REPLACEME
-EncoderType	ogg	REPLACEME
-EndOfRecordingExitPrompt	1	REPLACEME
-EPGFillType	10	REPLACEME
-EPGScrollType	1	REPLACEME
-EPGShowCategoryColors	1	REPLACEME
-EPGShowCategoryText	1	REPLACEME
-EPGShowChannelIcon	1	REPLACEME
-EPGShowFavorites	0	REPLACEME
-ExactSeeking	0	REPLACEME
-FFRewReposTime	100	REPLACEME
-FFRewReverse	1	REPLACEME
-FilenameTemplate	ARTIST/ALBUM/TRACK-TITLE	REPLACEME
-GalleryDir	/data/media/images	REPLACEME
-GalleryImportDirs	/mnt/cdrom:/mnt/camera	REPLACEME
-GalleryMoviePlayerCmd	mplayer -fs %s	REPLACEME
-GalleryOverlayCaption	0	REPLACEME
-GalleryRecursiveSlideshow	1	REPLACEME
-GallerySortOrder	20	REPLACEME
-GalleryThumbnailLocation	1	REPLACEME
-GameAllTreeLevels	system gamename	REPLACEME
-GameFavTreeLevels	gamename	REPLACEME
-GeneratePreviewPixmaps	0	REPLACEME
-GuiHeight	0	REPLACEME
-GuiOffsetX	0	REPLACEME
-GuiOffsetY	0	REPLACEME
-GuiSizeForTV	0	REPLACEME
-GuiVidModeResolution	640x480	REPLACEME
-GuiWidth	0	REPLACEME
-HaltCommand	halt	REPLACEME
-HideMouseCursor	1	REPLACEME
-HorizScanPercentage	0	REPLACEME
-Ignore_ID3	0	REPLACEME
-IndividualMuteControl	0	REPLACEME
-IntelliLastPlayWeight	25	REPLACEME
-IntelliPlayCountWeight	25	REPLACEME
-IntelliRandomWeight	15	REPLACEME
-IntelliRatingWeight	35	REPLACEME
-ISO639Language0	eng	REPLACEME
-ISO639Language1	eng	REPLACEME
-JobAllowCommFlag	1	REPLACEME
-JobAllowTranscode	1	REPLACEME
-JobQueueCheckFrequency	60	REPLACEME
-JobQueueCPU	0	REPLACEME
-JobQueueMaxSimultaneousJobs	1	REPLACEME
-JobQueueWindowEnd	23:59	REPLACEME
-JobQueueWindowStart	00:00	REPLACEME
-KeyboardAccelerators	1	REPLACEME
-Language	EN	REPLACEME
-LastMusicPlaylistPush	0	REPLACEME
-LCDBacklightOn	1	REPLACEME
-LCDBigClock	0	REPLACEME
-LCDEnable	0	REPLACEME
-LCDHeartBeatOn	0	REPLACEME
-LCDKeyString	ABCDEF	REPLACEME
-LCDPopupTime	5	REPLACEME
-LCDShowChannel	1	REPLACEME
-LCDShowGeneric	1	REPLACEME
-LCDShowMenu	1	REPLACEME
-LCDShowMusic	1	REPLACEME
-LCDShowMusicItems	ArtistTitle	REPLACEME
-LCDShowRecStatus	0	REPLACEME
-LCDShowTime	1	REPLACEME
-LCDShowVolume	1	REPLACEME
-LircKeyPressedApp		REPLACEME
-ListAsShuffled	0	REPLACEME
-LiveTVInAllPrograms	0	REPLACEME
-LogCleanDays	14	REPLACEME
-LogCleanDays	14	REPLACEME
-LogCleanEnabled	0	REPLACEME
-LogCleanEnabled	0	REPLACEME
-LogCleanMax	30	REPLACEME
-LogCleanMax	30	REPLACEME
-LogCleanPeriod	14	REPLACEME
-LogCleanPeriod	14	REPLACEME
-LogMaxCount	100	REPLACEME
-LogMaxCount	100	REPLACEME
-LogPrintLevel	8	REPLACEME
-LogPrintLevel	8	REPLACEME
-LongChannelFormat	<num> <name>	REPLACEME
-MasterMixerVolume	70	REPLACEME
-MenuTheme	STB-menu	REPLACEME
-MixerControl	PCM	REPLACEME
-MixerDevice	/dev/mixer	REPLACEME
-MonitorDrives	0	REPLACEME
-MovieDataCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D	REPLACEME
-MovieListCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no	REPLACEME
-MoviePosterCommandLine	/usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P	REPLACEME
-Mp3UseVBR	0	REPLACEME
-MTDac3Flag	0	REPLACEME
-MTDConcurrentTranscodes	1	REPLACEME
-MTDLogFlag	0	REPLACEME
-MTDNiceLevel	20	REPLACEME
-MTDPort	2442	REPLACEME
-MTDRipSize	0	REPLACEME
-MTDxvidFlag	1	REPLACEME
-MusicAudioDevice	default	REPLACEME
-MusicLocation	/data/media/audio	REPLACEME
-MusicShowRatings	0	REPLACEME
-MythArchiveAlwaysUseMythTranscode	1	REPLACEME
-MythArchiveChapterMenuAR	Video	REPLACEME
-MythArchiveCopyRemoteFiles	1	REPLACEME
-MythArchiveDateFormat	%a  %b  %d	REPLACEME
-MythArchiveDvdauthorCmd	dvdauthor	REPLACEME
-MythArchiveDVDLocation	/dev/dvd	REPLACEME
-MythArchiveEncodeToAc3	1	REPLACEME
-MythArchiveFfmpegCmd	ffmpeg	REPLACEME
-MythArchiveFileFilter	*.mpg *.mov *.avi *.mpeg *.nuv	REPLACEME
-MythArchiveGrowisofsCmd	growisofs	REPLACEME
-MythArchiveMainMenuAR	16:9	REPLACEME
-MythArchiveMkisofsCmd	mkisofs	REPLACEME
-MythArchiveMpeg2encCmd	mpeg2enc	REPLACEME
-MythArchiveMplexCmd	mplex	REPLACEME
-MythArchivePng2yuvCmd	png2yuv	REPLACEME
-MythArchiveShareDir	/usr/local/share/mythtv/mytharchive/	REPLACEME
-MythArchiveSpumuxCmd	spumux	REPLACEME
-MythArchiveTcrequantCmd	tcrequant	REPLACEME
-MythArchiveTempDir	/data/media/tmp	REPLACEME
-MythArchiveTimeFormat	%I:%M %p	REPLACEME
-MythArchiveUseFIFO	1	REPLACEME
-MythArchiveVideoFormat	NTSC	REPLACEME
-MythControlsVolume	1	REPLACEME
-mythdvd.DVDPlayerCommand	Internal	REPLACEME
-mythvideo.db_folder_view	1	REPLACEME
-mythvideo.ImageCacheSize	50	REPLACEME
-mythvideo.sort_ignores_case	1	REPLACEME
-NetworkControlEnabled	1	REPLACEME
-NetworkControlPort	6546	REPLACEME
-NonID3FileNameFormat	GENRE/ARTIST/ALBUM/TRACK_TITLE	REPLACEME
-NoPromptOnExit	0	REPLACEME
-NoWhitespace	0	REPLACEME
-OnlyImportNewMusic	0	REPLACEME
-OSDCC708CapitalsFont	FreeMono.ttf	REPLACEME
-OSDCC708CapitalsItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708CasualFont	FreeMono.ttf	REPLACEME
-OSDCC708CasualItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708CursiveFont	FreeMono.ttf	REPLACEME
-OSDCC708CursiveItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708DefaultFontType	MonoSerif	REPLACEME
-OSDCC708MonoSansSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSansSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708MonoSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSansSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSansSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSerifFont	FreeMono.ttf	REPLACEME
-OSDCC708PropSerifItalicFont	FreeMono.ttf	REPLACEME
-OSDCC708TextZoom	100	REPLACEME
-OSDCCFont	FreeMono.ttf	REPLACEME
-OSDFont	FreeMono.ttf	REPLACEME
-OSDGeneralTimeout	2	REPLACEME
-OSDNotifyTimeout	6	REPLACEME
-OSDProgramInfoTimeout	3	REPLACEME
-OSDTheme	Gray-OSD	REPLACEME
-OSDThemeFontSizeType	default	REPLACEME
-ParanoiaLevel	Full	REPLACEME
-PassThruOutputDevice	Default	REPLACEME
-PCMMixerVolume	70	REPLACEME
-PersistentBrowseMode	1	REPLACEME
-PIPLocation	0	REPLACEME
-PlaybackBoxStartInTitle	1	REPLACEME
-PlaybackExitPrompt	2	REPLACEME
-PlaybackPreview	1	REPLACEME
-PlaybackPreviewLowCPU	1	REPLACEME
-PlayBoxEpisodeSort	Date	REPLACEME
-PlayBoxOrdering	1	REPLACEME
-PlayBoxShading	0	REPLACEME
-PlayBoxTransparency	1	REPLACEME
-PlayMode	none	REPLACEME
-PostCDRipScript		REPLACEME
-PreferredMPEG2Decoder	ffmpeg	REPLACEME
-PreviewFromBookmark	1	REPLACEME
-PVR350EPGAlphaValue	164	REPLACEME
-PVR350InternalAudioOnly	0	REPLACEME
-PVR350OutputEnable	0	REPLACEME
-PVR350VideoDev	/dev/video16	REPLACEME
-QtFontBig	25	REPLACEME
-QtFontMedium	16	REPLACEME
-QtFontSmall	12	REPLACEME
-QueryInitialFilter	0	REPLACEME
-RandomTheme	0	REPLACEME
-RealtimePriority	1	REPLACEME
-RecordFilePrefix	/data/media/video/recordings	REPLACEME
-RememberRecGroup	1	REPLACEME
-RepeatMode	all	REPLACEME
-RunFrontendInWindow	0	REPLACEME
-SelChangeRecThreshold	16	REPLACEME
-SelectChangesChannel	1	REPLACEME
-ServiceMythWEB	0	REPLACEME
-ServiceNFS	0	REPLACEME
-ServiceSamba	0	REPLACEME
-SetupPinCodeRequired	0	REPLACEME
-ShortDateFormat	M/d	REPLACEME
-ShowGroupInfo	0	REPLACEME
-ShowWholeTree	1	REPLACEME
-SlideshowBackground		REPLACEME
-SlideshowDelay	5	REPLACEME
-SlideshowOpenGLTransition	none	REPLACEME
-SlideshowOpenGLTransitionLength	2000	REPLACEME
-SlideshowTransition	none	REPLACEME
-SmartChannelChange	0	REPLACEME
-SmartForward	0	REPLACEME
-StickyKeys	1	REPLACEME
-Style		REPLACEME
-SubTitleCommand	-sid %s	REPLACEME
-TagSeparator	 - 	REPLACEME
-Theme	basic-blue	REPLACEME
-ThemeFontSizeType	default	REPLACEME
-ThemePainter	qt	REPLACEME
-TimeFormat	h:mm AP	REPLACEME
-timePerPage	4	REPLACEME
-TitlePlayCommand	mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c	REPLACEME
-TranscodeCommand	transcode	REPLACEME
-TreeLevels	splitartist artist album title	REPLACEME
-TVVidModeForceAspect	0.0	REPLACEME
-TVVidModeForceAspect0	0.0	REPLACEME
-TVVidModeForceAspect1	0.0	REPLACEME
-TVVidModeForceAspect2	0.0	REPLACEME
-TVVidModeRefreshRate	0	REPLACEME
-TVVidModeRefreshRate0	0	REPLACEME
-TVVidModeRefreshRate1	0	REPLACEME
-TVVidModeRefreshRate2	0	REPLACEME
-TVVidModeResolution	640x480	REPLACEME
-TVVidModeResolution0	640x480	REPLACEME
-TVVidModeResolution1	640x480	REPLACEME
-TVVidModeResolution2	640x480	REPLACEME
-UDPNotifyPort	6948	REPLACEME
-UnknownCategory	Unknown	REPLACEME
-UnknownTitle	Unknown	REPLACEME
-upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1	dee5b0fe-7087-4960-8794-428d3e01a61f	REPLACEME
-UseArrowAccels	1	REPLACEME
-UseDHCP	1	REPLACEME
-UseOutputPictureControls	1	REPLACEME
-UseVideoModes	0	REPLACEME
-UseVideoTimebase	0	REPLACEME
-UseVirtualKeyboard	1	REPLACEME
-VCDDeviceLocation	/dev/cdrom	REPLACEME
-VCDPlayerCommand	mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv	REPLACEME
-VertScanPercentage	0	REPLACEME
-VideoAggressivePC	0	REPLACEME
-VideoArtworkDir	/data/media/images/posters	REPLACEME
-VideoBrowserNoDB	0	REPLACEME
-VideoDefaultParentalLevel	4	REPLACEME
-VideoGalleryAspectRatio	1	REPLACEME
-VideoGalleryColsPerPage	4	REPLACEME
-VideoGalleryNoDB	0	REPLACEME
-VideoGalleryRowsPerPage	3	REPLACEME
-VideoGallerySubtitle	1	REPLACEME
-VideoDefaultPlayer	/usr/bin/playmedia.sh VIDEO %s	REPLACEME
-VideoListUnknownFiletypes	1	REPLACEME
-VideoNewBrowsable	1	REPLACEME
-VideoStartupDir	/data/media/video/movies	REPLACEME
-VideoTreeLoadMetaData	1	REPLACEME
-VideoTreeNoDB	0	REPLACEME
-VidModeHeight0	0	REPLACEME
-VidModeHeight1	0	REPLACEME
-VidModeHeight2	0	REPLACEME
-VidModeWidth0	0	REPLACEME
-VidModeWidth1	0	REPLACEME
-VidModeWidth2	0	REPLACEME
-VisualCycleOnSongChange	0	REPLACEME
-VisualMode	Random	REPLACEME
-VisualModeDelay	0	REPLACEME
-VisualScaleHeight	1	REPLACEME
-VisualScaleWidth	1	REPLACEME
-WatchTVGuide	0	REPLACEME
-WebBrowserCommand	/usr/local/bin/mythbrowser	REPLACEME
-WebBrowserHideScrollbars	0	REPLACEME
-WebBrowserScrollMode	1	REPLACEME
-WebBrowserScrollSpeed	4	REPLACEME
-WebBrowserZoomLevel	20	REPLACEME
-XScanDisplacement	0	REPLACEME
-YScanDisplacement	0	REPLACEME
diff --git a/abs/core/live-installer/templates/sources/mv-core b/abs/core/live-installer/templates/sources/mv-core
deleted file mode 100644
index f9f6c97..0000000
--- a/abs/core/live-installer/templates/sources/mv-core
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-core
diff --git a/abs/core/live-installer/templates/sources/mv-core-testing b/abs/core/live-installer/templates/sources/mv-core-testing
deleted file mode 100644
index 1fce6ea..0000000
--- a/abs/core/live-installer/templates/sources/mv-core-testing
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-core-testing
diff --git a/abs/core/live-installer/templates/sources/mv-extra b/abs/core/live-installer/templates/sources/mv-extra
deleted file mode 100644
index e13640f..0000000
--- a/abs/core/live-installer/templates/sources/mv-extra
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-extra
diff --git a/abs/core/live-installer/templates/sources/mv-extra-testing b/abs/core/live-installer/templates/sources/mv-extra-testing
deleted file mode 100644
index c176add..0000000
--- a/abs/core/live-installer/templates/sources/mv-extra-testing
+++ /dev/null
@@ -1,2 +0,0 @@
-##Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-extra-testing
diff --git a/abs/core/live-installer/templates/sources/svc_pkg b/abs/core/live-installer/templates/sources/svc_pkg
deleted file mode 100644
index c1efdcc..0000000
--- a/abs/core/live-installer/templates/sources/svc_pkg
+++ /dev/null
@@ -1,3 +0,0 @@
-[svc_pkg]
-Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686
-
diff --git a/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
deleted file mode 100755
index 51db997..0000000
--- a/abs/core/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
+++ /dev/null
@@ -1,413 +0,0 @@
-#
-
-begin remote 
- 
-   name   Time_Warner_SA3250 
-   flags CONST_LENGTH|RAW_CODES 
-   eps            30 
-   aeps          100 
- 
-   ptrail          0 
-   repeat     0     0 
-   gap    100240 
-   frequency   57600 
- 
-       begin raw_codes 
- 
-           name MUTE 
-               972     802     971     802    1887     778 
-               971     798     971     798     972     798 
-               971     798     972     798     971    1677 
-               972     802    1887    1656     992 
- 
-           name POWER 
-              3450    3229     894    2468     891    2468 
-               893     778     892    2468     891    2469 
-               917    2444     891    2468     892    2469 
-               891     779     892     778     918     752 
-               917     754     917     752     892    2471 
-               889     779     892     779     892     777 
-               892     779     892     777     868    2492 
-               892    2469     891    2470     890 
- 
-           name GUIDE 
-              3397    3285     890    2470     840    2519 
-               916     755     891    2470     839    2520 
-               891     780     891    2474     860    2495 
-               892     778     917     754     890     780 
-               891     781     864     804     917    2443 
-               865     805     891     779     866    2495 
-               864     805     892     779     891    2469 
-               865    2495     891    2469     866 
- 
- 
-           name INFO 
-              3449    3231     918    2441     920    2440 
-               920     750     947    2414     920    2440 
-               920     750     894     777     919     750 
-               947    2413     921     750     919     750 
-               920     751     919     752     918    2441 
-               921     749     895     776     919    2441 
-               920    2440     920    2441     920     749 
-               921    2439     921    2440     921 
- 
-           name UP 
-              3396    3285     915    2444     919    2442 
-               918     752     916    2444     919    2441 
-               919     751     916    2445     919     751 
-               890     780     916     753     917     754 
-               942     729     889     780     916    2445 
-               919     751     915     756     914    2448 
-               916     752     916    2444     918    2442 
-               919    2441     918    2443     918 
- 
-           name DOWN 
-              3421    3261     890    2470     918    2442 
-               919     751     916    2446     917    2441 
-               919    2442     918    2442     918     752 
-               916    2444     919     751     890     780 
-               916     755     915     755     915    2445 
-               919     753     914     755     889     781 
-               889     781     916    2444     919     752 
-               889    2471     919    2441     918 
- 
-           name LEFT 
-              3427    3255     918    2441     924    2437 
-               920     750     918    2442     920    2441 
-               919    2440     921    2439     921     750 
-               919     751     944     726     919     752 
-               917     753     918     751     944    2417 
-               920     750     893     777     919     751 
-               919     752     918    2441     921    2440 
-               920    2440     920    2440     921 
- 
-           name RIGHT 
-              3424    3258     892    2466     921    2439 
-               896     774     920    2441     920    2440 
-               920     750     920     751     945    2414 
-               921     750     919     751     920     750 
-               919     752     919     751     919    2440 
-               921     750     918     752     918    2442 
-               920    2440     921     749     918    2443 
-               920    2440     920    2441     919 
- 
-           name SELECT 
-              3424    3257     944    2416     919    2442 
-               919     750     918    2442     920    2441 
-               919     751     943     727     918    2442 
-               920    2440     920     752     916     752 
-               969     702     917     753     892    2468 
-               919     751     892     778     918    2442 
-               924    2436     921     750     917     753 
-               918    2443     919    2441     919 
- 
-           name SETTINGS 
-              3402    3278     871    2491     921    2438 
-               921     749     922    2440     919    2441 
-               919    2440     921     749     921     750 
-               895    2465     920    2440     921    2440 
-               920     749     896     775     921    2439 
-               920     749     923     748     895     775 
-               922    2439     920    2440     920     749 
-               897     774     896     774     921 
- 
-           name EXIT 
-              3400    3279     896    2464     921    2439 
-               921     750     895    2465     921    2439 
-               921     749     898     772     896    2465 
-               920    2440     920     750     920    2441 
-               920     749     896     774     870    2491 
-               921     749     921     749     895    2465 
-               921    2440     920     749     922     748 
-               897    2464     920     750     896 
- 
-           name PGUP 
-              3425    3255     920    2440     920    2440 
-               921     749     895    2466     920    2440 
-               920     749     920    2441     896    2464 
-               921     749     919    2445     917    2440 
-               920     750     920     750     920    2441 
-               921     748     921     749     920    2440 
-               921     750     919     752     919    2440 
-               921     749     921     750     919 
- 
-           name PGDN 
-              3400    3281     921    2438     921    2441 
-               920     749     895    2465     896    2465 
-               920    2440     920    2440     920    2440 
-               921     749     896    2465     895    2465 
-               920     750     895     775     920    2440 
-               921     749     921     750     895     775 
-               896     774     896     774     921    2439 
-               921     749     921     751     894 
- 
-           name VOLUP 
-               995     778    1886     779     994     775 
-               995     777     993     774     996     774 
-               995     775     995    1654    1885     778 
-               995     775     995     774     995 
- 
-           name VOLDN 
-               996     778     971     802    1862     803 
-               970     799     996     774     995     774 
-               996     774     995    1654    1886     778 
-               996     773     971    1678     991 
- 
-           name CHUP 
-              3421    3259     916    2444     918    2443 
-               918     751     917    2444     919    2441 
-               919    2441     919     751     916    2444 
-               919    2441     919    2443     918     751 
-               941     729     916     755     917    2442 
-               919     752     916     754     891     778 
-               918    2444     918     751     916     754 
-               917     753     916    2445     919 
- 
-           name CHDN 
-              3421    3260     915    2445     918    2442 
-               919     751     891    2469     919    2441 
-               927     745     915    2444     919    2441 
-               919    2441     919    2442     918     752 
-               915     755     890     780     917    2443 
-               919     752     916     754     915    2445 
-               919     751     915     755     890     781 
-               914     756     916    2445     917 
- 
-           name A 
-              3425    3258     916    2442     920    2441 
-               919     751     918    2442     919    2441 
-               920    2440     920    2441     919    2441 
-               919    2441     920     750     917    2443 
-               920     751     917     752     919    2442 
-               920     750     918     753     917     753 
-               917     753     942     728     917     753 
-               918    2442     920     750     942 
- 
-           name B 
-              3398    3283     916    2443     892    2470 
-               892     778     892    2468     891    2475 
-               886     779     916     754     892     777 
-               892     778     919    2442     891    2468 
-               918     753     892     778     891    2469 
-               892     778     892     778     918    2443 
-               891    2469     892    2467     893    2469 
-               891     778     918     753     892 
- 
-           name C 
-              3396    3283     891    2469     892    2468 
-               892     778     917    2444     892    2468 
-               892    2469     891     778     892     779 
-               893     777     892    2468     892    2468 
-               918     752     893     777     892    2469 
-               892     778     892     778     867     802 
-               918    2444     917    2442     868    2492 
-               893     778     892     779     916 
- 
-           name 1 
-              3424    3257     890    2470     865    2495 
-               891     780     892    2468     865    2495 
-               892     777     891     780     892     779 
-               890     780     916    2444     865     805 
-               891     779     917     753     916    2445 
-               865     805     916     754     892    2469 
-               865    2494     916    2445     865    2495 
-               891     779     917    2443     866 
- 
-           name 2 
-              3422    3258     916    2444     865    2496 
-               889     782     915    2444     865    2495 
-               917    2444     839     830     891     780 
-               915     755     890    2470     864     806 
-               917     753     891     780     866    2495 
-               864     805     891     779     892     779 
-               865    2494     865    2496     891    2469 
-               865     805     891    2469     865 
- 
-           name 3 
-              3397    3284     916    2443     892    2468 
-               892     779     893    2467     892    2468 
-               917     753     892    2469     891     778 
-               893     778     891    2469     892     778 
-               918     753     890     779     893    2468 
-               891     779     893     778     891    2469 
-               892     777     893    2468     891    2468 
-               917     754     943    2417     892 
- 
-           name 4 
-              3421    3261     890    2470     839    2520 
-               917     753     891    2470     865    2495 
-               917    2443     865    2495     890     781 
-               891     778     891    2470     865     804 
-               895     776     892     779     891    2468 
-               866     805     917     753     943     727 
-               866     805     889    2471     865    2494 
-               892     780     916    2444     865 
- 
-           name 5 
-              3396    3282     920    2441     892    2467 
-               894     778     891    2468     892    2469 
-               891     780     866     802     893    2470 
-               890     779     918    2443     891     777 
-               892     779     918     752     892    2468 
-               892     779     918     752     918    2443 
-               891    2469     891     779     891    2469 
-               892     778     891    2468     893 
- 
-           name 6 
-              3396    3284     918    2442     866    2494 
-               892     778     917    2444     866    2494 
-               917    2444     865     804     893    2468 
-               890     780     916    2445     890     779 
-               892     779     891     778     918    2443 
-               891     778     892     779     892     779 
-               891    2468     892     778     919    2444 
-               889     778     893    2468     891 
- 
-           name 7 
-              3398    3282     893    2467     892    2468 
-               893     779     891    2469     891    2468 
-               919     752     892    2467     892    2469 
-               891     779     892    2468     892     777 
-               893     778     918     752     892    2468 
-               893     779     916     753     918    2442 
-               892     779     891     778     893    2468 
-               892     778     893    2467     892 
- 
-           name 8 
-              3448    3232     892    2468     866    2494 
-               892     779     892    2467     867    2494 
-               891    2469     866    2495     891    2469 
-               865     805     968    2394     864     804 
-               918     753     891     779     892    2468 
-               866     804     917     754     891     780 
-               916     752     917     754     892    2469 
-               865     804     893    2468     890 
- 
-           name 9 
-              3422    3258     891    2469     839    2521 
-               891     780     892    2468     824    2536 
-               916     754     916     755     891     779 
-               866    2494     839    2522     891     778 
-               892     778     890     781     915    2448 
-               837     831     891     779     890    2470 
-               837    2523     942    2418     838     832 
-               892     778     890    2471     839 
- 
-           name 0 
-              3398    3284     891    2469     890    2469 
-               893     779     891    2468     892    2468 
-               892    2468     892     778     892     779 
-               891    2469     892    2468     893     778 
-               892     777     893     777     893    2469 
-               891     778     892     779     868     802 
-               917    2443     892    2469     890     779 
-               891     779     892    2468     893 
- 
-           name LAST 
-              3422    3258     891    2471     916    2443 
-               891     780     891    2469     272    3088 
-               865     805     916    2445     308    3052 
-               890    2469     892     779     915     756 
-               889     781     889     780     890    2471 
-               890     779     889     781     891    2471 
-               272    1397     890     779     891     781 
-               890    2469     448    2912     917 
- 
-           name FAV 
-              3423    3257     918    2442     944    2417 
-               917     753     892    2469     890    2471 
-               324    3036     890    2469     379     289 
-               167    2525     891    2470     379    2981 
-               890     780     378     270     242     781 
-               866     806     889    2469     786     884 
-               891     779     891     779     892     779 
-               916     754     890     779     892     778 
-               891    2470     839 
- 
-           name REW 
-              3420    3258     916    2445     326    3033 
-               891     780     916    2443     891    2469 
-               916    2445     838     831     918     754 
-               890    2471     837     832     916    2444 
-               838     832     891     779     916    2445 
-               838     831     892     779     890     780 
-               892    2469     839    2520     891     780 
-               915    2444     836     836     890 
- 
-           name PLAY 
-              3448    3233     916    2444     891    2469 
-               917     753     892    2468     918    2443 
-               941    2420     891    2468     917     754 
-               915     755     914    2446     918    2443 
-               916     754     916     753     945    2416 
-               943     727     941     729     918     752 
-               917     753     919    2442     916    2444 
-               915     755     943     728     916 
- 
-           name FF 
-              3420    3259     917    2442     946    2415 
-               918     752     916    2445     918    2441 
-               943     728     917     753     942     728 
-               892    2470     864     806     889    2471 
-               865     805     918     752     916    2443 
-               944     726     892     779     891    2470 
-               891    2469     915    2445     917     753 
-               890    2471     222    1447     891 
- 
-           name PAUSE 
-              3421    3259     891    2470     787    2573 
-               890     780     916    2444     840    2520 
-               892    2468     864     806     917    2444 
-               839     831     890     780     891     779 
-               891     780     891     779     889    2471 
-               839     831     916     755     915     754 
-               892    2469     839     830     917    2444 
-               840    2521     891    2469     840 
- 
-           name STOP 
-              3398    3284     889    2471     325    3036 
-               891     779     890    2470     395     290 
-               140    2535     889     781     890     781 
-               889    2470     274    1397     891    2470 
-               272    3087     917     754     890     780 
-               889    2472     293    1377     890     779 
-               916    2444     448    2913     916     754 
-               866    2495     325    1344     891     779 
-               915 
- 
-           name REC 
-              3421    3258     917    2444     916    2444 
-               942     729     942    2420     889    2469 
-               992    2367     942     730     891    2468 
-               917     754     916    2443     892    2470 
-               892     777     916     754     892    2467 
-               943     730     916     754     891     779 
-               917    2442     917     754     943    2417 
-               918     753     915     754     892 
- 
-           name BYPASS 
-              3450    3231     891    2470     890    2470 
-               917     753     916    2447     913    2445 
-               273    3088     889     780     890    2470 
-               891    2469     916     755     890     780 
-               942     727     918     752     916    2444 
-               890     782     916     754     865     805 
-               891    2469     891     780     889     781 
-               891    2468     259    3102     866 
- 
-           name TV/VCR 
-             19945    3915     612    1873     560    1926 
-               560    1925     561     931     560     931 
-               587     905     559     931     563     931 
-               557     932     561    1925     585     908 
-               583    1901     559     931     586     905 
-               585     907     610    1875     561    1924 
-               561    1926     559    1926     535    1951 
-               559    1925     586     907     585    1899 
-               560     931    1048    7898    3707    3862 
-               587    1899     586    1899     586    1900 
-               559     932     586     908     323 
- 
-       end raw_codes 
- 
- end remote
diff --git a/abs/core/live-installer/templates/xine.config.template b/abs/core/live-installer/templates/xine.config.template
deleted file mode 100644
index 966487f..0000000
--- a/abs/core/live-installer/templates/xine.config.template
+++ /dev/null
@@ -1,754 +0,0 @@
-#
-# xine config file
-#
-.version:2
-
-# Entries which are still set to their default values are commented out.
-# Remove the '#' at the beginning of the line, if you want to change them.
-
-# Enable deinterlacing by default
-# bool, default: 0
-#gui.deinterlace_by_default:0
-
-# Configuration experience level
-# { Beginner  Advanced  Expert  Master of the known universe }, default: 0
-gui.experience_level:Expert
-
-# Enable OSD support
-# bool, default: 1
-#gui.osd_enabled:1
-
-# Dismiss OSD time (s)
-# numeric, default: 3
-#gui.osd_timeout:3
-
-# Ask user for playback with unsupported codec
-# bool, default: 0
-#gui.play_anyway:0
-
-# Automatically reload old playlist
-# bool, default: 0
-#gui.playlist_auto_reload:0
-
-# Audio visualization plugin
-# { oscope  fftscope  fftgraph  goom }, default: 0
-gui.post_audio_plugin:fftgraph
-
-# gui skin theme
-# { Antares  Centori  KeramicRH8  cloudy  xinetic }, default: 4
-gui.skin:KeramicRH8
-
-# Change xine's behavior for unexperienced user
-# bool, default: 1
-#gui.smart_mode:1
-
-# Snapshot location
-# string, default: /home/jams
-#gui.snapshotdir:/home/jams
-
-# Display splash screen
-# bool, default: 1
-gui.splash:0
-
-# Subtitle autoloading
-# bool, default: 1
-#gui.subtitle_autoload:1
-
-# Visual animation style
-# { None  Post Plugin  Stream Animation }, default: 1
-#gui.visual_anim:Post Plugin
-
-# Windows stacking (more)
-# bool, default: 0
-#gui.always_layer_above:0
-
-# Audio mixer control method
-# { Sound card  Software }, default: 0
-#gui.audio_mixer_method:Sound card
-
-# Visiblility behavior of panel
-# bool, default: 0
-#gui.auto_panel_visibility:0
-
-# Visibility behavior of output window
-# bool, default: 0
-#gui.auto_video_output_visibility:0
-
-# Deinterlace plugin.
-# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
-#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
-
-# Event sender behavior
-# bool, default: 1
-#gui.eventer_sticky:1
-
-# Windows stacking
-# bool, default: 0
-#gui.layer_above:0
-
-# Use unscaled OSD
-# bool, default: 1
-gui.osd_use_unscaled:0
-
-# Screensaver reset interval (s)
-# numeric, default: 10
-#gui.screensaver_timeout:10
-
-# Menu shortcut style
-# { Windows style  Emacs style }, default: 0
-#gui.shortcut_style:Windows style
-
-# Stream information
-# bool, default: 0
-#gui.sinfo_auto_update:0
-
-# Skin Server Url
-# string, default: http://xine.sourceforge.net/skins/skins.slx
-#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
-
-# Chapter hopping
-# bool, default: 1
-#gui.skip_by_chapter:1
-
-# New stream sizes resize output window
-# bool, default: 1
-#gui.stream_resize_window:1
-
-# Tips timeout (ms)
-# numeric, default: 5000
-#gui.tips_timeout:5000
-
-# gui tips visibility
-# bool, default: 1
-#gui.tips_visible:1
-
-# Name of video display
-# string, default:
-#gui.video_display:
-
-# Synchronized X protocol (debug)
-# bool, default: 0
-#gui.xsynchronize:0
-
-# Double size for small streams (require stream_resize_window)
-# bool, default: 0
-#gui.zoom_small_stream:0
-
-# Logo mrl
-# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
-#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
-
-# use XVidModeExtension when switching to fullscreen
-# bool, default: 0
-#gui.use_xvidext:0
-
-# height for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_height:-8192
-
-# width for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_width:-8192
-
-# x coordinate for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_x:-8192
-
-# y coordinate for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_y:-8192
-
-# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3)
-# string, default: 0 1
-#gui.xinerama_use_screens:0 1
-
-# Amplification level
-# [0..200], default: 100
-#gui.amp_level:100
-
-# gui panel visibility
-# bool, default: 1
-gui.panel_visible:0
-
-# numeric, default: 200
-gui.panel_x:21
-
-# numeric, default: 100
-gui.panel_y:1050
-
-gui.control_x:186
-
-gui.control_y:46
-
-gui.dropped_frames_warning:0
-
-gui.eventer_x:1041
-
-gui.eventer_y:781
-
-gui.mrl_browser_x:23
-
-gui.mrl_browser_y:9
-
-gui.setup_x:717
-
-gui.setup_y:227
-
-gui.viewlog_x:200
-
-gui.viewlog_y:210
-
-# color specification yuv-opacity
-# string, default: 8080c0-f
-#gui.osdmenu.color_focused_button:8080c0-f
-
-# color specification yuv-opacity
-# string, default: 808080-f
-#gui.osdmenu.color_focused_slider:808080-f
-
-# color specification yuv-opacity
-# string, default: ff8080-f
-#gui.osdmenu.color_focused_slider_knob:ff8080-f
-
-# color specification yuv-opacity
-# string, default: 808080-f
-#gui.osdmenu.color_focused_text_border:808080-f
-
-# color specification yuv-opacity
-# string, default: ff8080-f
-#gui.osdmenu.color_focused_text_foreground:ff8080-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_label_border:0080c0-f
-
-# color specification yuv-opacity
-# string, default: c08080-f
-#gui.osdmenu.color_label_foreground:c08080-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_label_window:0080c0-f
-
-# color specification yuv-opacity
-# string, default: 008000-f
-#gui.osdmenu.color_slider:008000-f
-
-# color specification yuv-opacity
-# string, default: ffff00-f
-#gui.osdmenu.color_slider_knob:ffff00-f
-
-# color specification yuv-opacity
-# string, default: 008000-f
-#gui.osdmenu.color_text_border:008000-f
-
-# color specification yuv-opacity
-# string, default: ffff00-f
-#gui.osdmenu.color_text_foreground:ffff00-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_text_window:0080c0-f
-
-# directory a media in dvd device will be mounted
-# string, default: /dvd
-#gui.osdmenu.dvd_mountpoint:/dvd
-
-# palette (foreground-border-background) to use for subtitles and OSD
-# { white-black-transparent  white-none-transparent  white-none-translucid  yellow-black-transparent }, default: 0
-#ui.osd.text_palette:white-black-transparent
-
-# audio driver to use
-# { auto  null  alsa  oss  esd  file  none }, default: 0
-audio.driver:oss
-
-# a/v sync method to use by OSS
-# { auto  getodelay  getoptr  softsync  probebuffer }, default: 0
-#audio.oss_sync_method:auto
-
-# use A/52 dynamic range compression
-# bool, default: 0
-#audio.a52.dynamic_range:0
-
-# downmix audio to 2 channel surround stereo
-# bool, default: 0
-#audio.a52.surround_downmix:0
-
-# A/52 volume
-# [0..200], default: 100
-#audio.a52.level:100
-
-# OSS audio device name
-# { auto  /dev/dsp  /dev/sound/dsp }, default: 0
-#audio.device.oss_device_name:auto
-
-# OSS audio device number, -1 for none
-# numeric, default: -1
-#audio.device.oss_device_number:-1
-
-# OSS audio mixer number, -1 for none
-# numeric, default: -1
-#audio.device.oss_mixer_number:-1
-
-audio.device.alsa_front_device:default
-
-# speaker arrangement
-# { Mono 1.0  Stereo 2.0  Headphones 2.0  Stereo 2.1  Surround 3.0  Surround 4.0  Surround 4.1  Surround 5.0  Surround 5.1  Surround 6.0  Surround 6.1  Surround 7.1  Pass Through }, default: 1
-#audio.output.speaker_arrangement:Stereo 2.0
-
-# offset for digital passthrough
-# numeric, default: 0
-#audio.synchronization.passthrough_offset:0
-
-# play audio even on slow/fast speeds
-# bool, default: 0
-#audio.synchronization.slow_fast_audio:0
-
-# method to sync audio and video
-# { metronom feedback  resample }, default: 0
-#audio.synchronization.av_sync_method:metronom feedback
-
-# always resample to this rate (0 to disable)
-# numeric, default: 0
-#audio.synchronization.force_rate:0
-
-# enable resampling
-# { auto  off  on }, default: 0
-#audio.synchronization.resample_mode:auto
-
-# startup audio volume
-# [0..100], default: 50
-#audio.volume.mixer_volume:50
-
-# restore volume level at startup
-# bool, default: 0
-#audio.volume.remember_volume:0
-
-# video driver to use
-# { auto  aadxr3  dxr3  xv  opengl  SyncFB  xshm  none  xxmc  sdl  vidixfb  vidix  fb  xvmc }, default: 0
-#video.driver:auto
-
-# pitch alignment workaround
-# bool, default: 0
-#video.device.xv_pitch_alignment:0
-
-# disable exact alpha blending of overlays
-# bool, default: 0
-#video.output.disable_exact_alphablend:0
-
-# disable all video scaling
-# bool, default: 0
-#video.output.disable_scaling:0
-
-# horizontal image position in the output window
-# [0..100], default: 50
-#video.output.horizontal_position:50
-
-# vertical image position in the output window
-# [0..100], default: 50
-#video.output.vertical_position:50
-
-# deinterlace method (deprecated)
-# { none  bob  weave  greedy  onefield  onefield_xv  linearblend }, default: 4
-video.output.xv_deinterlace_method:linearblend
-
-# MPEG-4 postprocessing quality
-# [0..6], default: 3
-#video.processing.ffmpeg_pp_quality:3
-
-# DXR3 device number
-# numeric, default: 0
-#dxr3.device_number:0
-
-# swap odd and even lines
-# bool, default: 0
-#dxr3.encoding.swap_fields:0
-
-# add black bars to correct aspect ratio
-# bool, default: 1
-#dxr3.encoding.add_bars:1
-
-# use smooth play mode for mpeg encoder playback
-# bool, default: 1
-#dxr3.encoding.alt_play_mode:1
-
-# device used for CD audio
-# string, default: /dev/cdrom
-#media.audio_cd.device:/dev/cdrom
-
-# slow down disc drive to this speed factor
-# numeric, default: 4
-#media.audio_cd.drive_slowdown:4
-
-# query CDDB
-# bool, default: 1
-#media.audio_cd.use_cddb:1
-
-# CDDB cache directory
-# string, default: /home/jams/.xine/cddbcache
-#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache
-
-# CDDB server port
-# numeric, default: 8880
-#media.audio_cd.cddb_port:8880
-
-# CDDB server name
-# string, default: freedb.freedb.org
-#media.audio_cd.cddb_server:freedb.freedb.org
-
-# directory for saving streams
-# string, default:
-#media.capture.save_dir:
-
-# Number of dvb card to use.
-# numeric, default: 0
-#media.dvb.adapter:0
-
-# Remember last DVB channel watched
-# bool, default: 1
-#media.dvb.remember_channel:1
-
-# Last DVB channel viewed
-# numeric, default: -1
-#media.dvb.last_channel:-1
-
-# default language for DVD playback
-# string, default: en
-#media.dvd.language:en
-
-# region the DVD player claims to be in (1 to 8)
-# numeric, default: 1
-#media.dvd.region:1
-
-# device used for DVD playback
-# string, default: /dev/dvd
-#media.dvd.device:/dev/dvd
-
-# raw device set up for DVD access
-# string, default: /dev/rdvd
-#media.dvd.raw_device:/dev/rdvd
-
-# read-ahead caching
-# bool, default: 1
-#media.dvd.readahead:1
-
-# CSS decryption method
-# { key  disc  title }, default: 0
-#media.dvd.css_decryption_method:key
-
-# play mode when title/chapter is given
-# { entire dvd  one chapter }, default: 0
-#media.dvd.play_single_chapter:entire dvd
-
-# unit for seeking
-# { seek in program chain  seek in program }, default: 0
-#media.dvd.seek_behaviour:seek in program chain
-
-# unit for the skip action
-# { skip program  skip part  skip title }, default: 0
-#media.dvd.skip_behaviour:skip program
-
-# path to the title key cache
-# string, default: /home/jams/.dvdcss/
-#media.dvd.css_cache_path:/home/jams/.dvdcss/
-
-# file browsing start location
-# string, default: /home/jams
-#media.files.origin_path:/home/jams
-
-# list hidden files
-# bool, default: 0
-#media.files.show_hidden_files:0
-
-# network bandwidth
-# { 14.4 Kbps (Modem)  19.2 Kbps (Modem)  28.8 Kbps (Modem)  33.6 Kbps (Modem)  34.4 Kbps (Modem)  57.6 Kbps (Modem)  115.2 Kbps (ISDN)  262.2 Kbps (Cable/DSL)  393.2 Kbps (Cable/DSL)  524.3 Kbps (Cable/DSL)  1.5 Mbps (T1)  10.5 Mbps (LAN) }, default: 10
-#media.network.bandwidth:1.5 Mbps (T1)
-
-# Timeout for network stream reading (in seconds)
-# numeric, default: 30
-#media.network.timeout:30
-
-# Domains for which to ignore the HTTP proxy
-# string, default:
-#media.network.http_no_proxy:
-
-# HTTP proxy host
-# string, default:
-#media.network.http_proxy_host:
-
-# HTTP proxy password
-# string, default:
-#media.network.http_proxy_password:
-
-# HTTP proxy port
-# numeric, default: 80
-#media.network.http_proxy_port:80
-
-# HTTP proxy username
-# string, default:
-#media.network.http_proxy_user:
-
-# MMS protocol
-# { auto  TCP  HTTP }, default: 0
-#media.network.mms_protocol:auto
-
-# automatically advance VCD track/entry
-# bool, default: 1
-#media.vcd.autoadvance:1
-
-# VCD default type to use on autoplay
-# { MPEG track  entry  segment  playback-control item }, default: 3
-#media.vcd.autoplay:playback-control item
-
-# CD-ROM drive used for VCD when none given
-# string, default:
-#media.vcd.device:
-
-# VCD position slider range
-# { auto  track  entry }, default: 0
-#media.vcd.length_reporting:auto
-
-# show 'rejected' VCD LIDs
-# bool, default: 0
-#media.vcd.show_rejected:0
-
-# VCD format string for stream comment field
-# string, default: %P - Track %T
-#media.vcd.comment_format:%P - Track %T
-
-# VCD debug flag mask
-# numeric, default: 0
-#media.vcd.debug:0
-
-# VCD format string for display banner
-# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
-#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
-
-# v4l radio device
-# string, default: /dev/v4l/radio0
-#media.video4linux.radio_device:/dev/v4l/radio0
-
-# v4l video device
-# string, default: /dev/v4l/video0
-#media.video4linux.video_device:/dev/v4l/video0
-
-# device used for WinTV-PVR 250/350 (pvr plugin)
-# string, default: /dev/video0
-#media.wintv_pvr.device:/dev/video0
-
-# path to RealPlayer codecs
-# string, default: /usr/lib/win32
-#decoder.external.real_codecs_path:/usr/lib/win32
-
-# path to Win32 codecs
-# string, default: /usr/lib/win32
-#decoder.external.win32_codecs_path:/usr/lib/win32
-
-# subtitle size
-# { tiny  small  normal  large  very large  huge }, default: 1
-#subtitles.separate.subtitle_size:small
-
-# subtitle vertical offset
-# numeric, default: 0
-#subtitles.separate.vertical_offset:0
-
-# font for subtitles
-# string, default: sans
-#subtitles.separate.font:sans
-
-# encoding of the subtitles
-# string, default: iso-8859-1
-#subtitles.separate.src_encoding:iso-8859-1
-
-# use unscaled OSD if possible
-# bool, default: 1
-#subtitles.separate.use_unscaled_osd:1
-
-# default duration of subtitle display in seconds
-# numeric, default: 4
-#subtitles.separate.timeout:4
-
-# frames per second to generate
-# numeric, default: 14
-#effects.goom.fps:14
-
-# goom image height
-# numeric, default: 240
-#effects.goom.height:240
-
-# goom image width
-# numeric, default: 320
-#effects.goom.width:320
-
-# colorspace conversion method
-# { Fast but not photorealistic  Slow but looks better }, default: 0
-#effects.goom.csc_method:Fast but not photorealistic
-
-# number of audio buffers
-# numeric, default: 230
-#engine.buffers.audio_num_buffers:230
-
-# number of video buffers
-# numeric, default: 500
-#engine.buffers.video_num_buffers:500
-
-# default number of video frames
-# numeric, default: 15
-#engine.buffers.video_num_frames:15
-
-# priority for a/52 decoder
-# numeric, default: 0
-#engine.decoder_priorities.a/52:0
-
-# priority for bitplane decoder
-# numeric, default: 0
-#engine.decoder_priorities.bitplane:0
-
-# priority for dts decoder
-# numeric, default: 0
-#engine.decoder_priorities.dts:0
-
-# priority for dvaudio decoder
-# numeric, default: 0
-#engine.decoder_priorities.dvaudio:0
-
-# priority for dxr3-mpeg2 decoder
-# numeric, default: 0
-#engine.decoder_priorities.dxr3-mpeg2:0
-
-# priority for dxr3-spudec decoder
-# numeric, default: 0
-#engine.decoder_priorities.dxr3-spudec:0
-
-# priority for faad decoder
-# numeric, default: 0
-#engine.decoder_priorities.faad:0
-
-# priority for ffmpeg-wmv8 decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpeg-wmv8:0
-
-# priority for ffmpeg-wmv9 decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpeg-wmv9:0
-
-# priority for ffmpegaudio decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpegaudio:0
-
-# priority for ffmpegvideo decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpegvideo:0
-
-# priority for gdkpixbuf decoder
-# numeric, default: 0
-#engine.decoder_priorities.gdkpixbuf:0
-
-# priority for gsm610 decoder
-# numeric, default: 0
-#engine.decoder_priorities.gsm610:0
-
-# priority for image decoder
-# numeric, default: 0
-#engine.decoder_priorities.image:0
-
-# priority for mad decoder
-# numeric, default: 0
-#engine.decoder_priorities.mad:0
-
-# priority for mpc decoder
-# numeric, default: 0
-#engine.decoder_priorities.mpc:0
-
-# priority for mpeg2 decoder
-# numeric, default: 0
-#engine.decoder_priorities.mpeg2:0
-
-# priority for nsf decoder
-# numeric, default: 0
-#engine.decoder_priorities.nsf:0
-
-# priority for pcm decoder
-# numeric, default: 0
-#engine.decoder_priorities.pcm:0
-
-# priority for qta decoder
-# numeric, default: 0
-#engine.decoder_priorities.qta:0
-
-# priority for qtv decoder
-# numeric, default: 0
-#engine.decoder_priorities.qtv:0
-
-# priority for real decoder
-# numeric, default: 0
-#engine.decoder_priorities.real:0
-
-# priority for realadec decoder
-# numeric, default: 0
-#engine.decoder_priorities.realadec:0
-
-# priority for rgb decoder
-# numeric, default: 0
-#engine.decoder_priorities.rgb:0
-
-# priority for spucc decoder
-# numeric, default: 0
-#engine.decoder_priorities.spucc:0
-
-# priority for spucmml decoder
-# numeric, default: 0
-#engine.decoder_priorities.spucmml:0
-
-# priority for spudec decoder
-# numeric, default: 0
-#engine.decoder_priorities.spudec:0
-
-# priority for spudvb decoder
-# numeric, default: 0
-#engine.decoder_priorities.spudvb:0
-
-# priority for sputext decoder
-# numeric, default: 0
-#engine.decoder_priorities.sputext:0
-
-# priority for theora decoder
-# numeric, default: 0
-#engine.decoder_priorities.theora:0
-
-# priority for vorbis decoder
-# numeric, default: 0
-#engine.decoder_priorities.vorbis:0
-
-# priority for win32a decoder
-# numeric, default: 0
-#engine.decoder_priorities.win32a:0
-
-# priority for win32v decoder
-# numeric, default: 0
-#engine.decoder_priorities.win32v:0
-
-# priority for yuv decoder
-# numeric, default: 0
-#engine.decoder_priorities.yuv:0
-
-# media format detection strategy
-# { default  reverse  content  extension }, default: 0
-#engine.demux.strategy:default
-
-# memcopy method used by xine
-# { probe  libc  kernel  mmx  mmxext  sse }, default: 0
-engine.performance.memcpy_method:libc
-
-# percentage of discarded frames to tolerate
-# numeric, default: 10
-#engine.performance.warn_discarded_threshold:10
-
-# percentage of skipped frames to tolerate
-# numeric, default: 10
-#engine.performance.warn_skipped_threshold:10
-
-# allow implicit changes to the configuration (e.g. by MRL)
-# bool, default: 0
-#misc.implicit_config:0
-
diff --git a/abs/core/live-installer/templates/xorg/modeline.ATSC b/abs/core/live-installer/templates/xorg/modeline.ATSC
deleted file mode 100644
index b2cd709..0000000
--- a/abs/core/live-installer/templates/xorg/modeline.ATSC
+++ /dev/null
@@ -1,33 +0,0 @@
-ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750
-
-ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525
-
-ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync
-
-ModeLine "My720p"  73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync  74.086 MHz 44.955 kHz 5$
-
-ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync  74.086 MHz 44.955 kHz 5$
-
-ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace
-
-ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace
-
-Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace
-
-Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace
-
-Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace
-
-Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace
-
-Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace
-
-Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace
-
-Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135
-
-Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace
-
-Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
-
-Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync
diff --git a/abs/core/live-installer/templates/xorg/modeline.DVD b/abs/core/live-installer/templates/xorg/modeline.DVD
deleted file mode 100644
index 9e846d0..0000000
--- a/abs/core/live-installer/templates/xorg/modeline.DVD
+++ /dev/null
@@ -1,9 +0,0 @@
-#DVD-NativeModes
-ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace
-ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace
-ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525
diff --git a/abs/core/live-installer/templates/xorg/modeline.NTSC b/abs/core/live-installer/templates/xorg/modeline.NTSC
deleted file mode 100644
index 5536c1b..0000000
--- a/abs/core/live-installer/templates/xorg/modeline.NTSC
+++ /dev/null
@@ -1,10 +0,0 @@
-#Analog-RegularModes
-ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace
-ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525
-ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace
-ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525
-ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace
-ModeLine "Broadcast-59.94p" 483 484 492 525
-ModeLine "VHS-59.94i" 483 484 492 525 Interlace
-ModeLine "VHS-59.94p" 483 484 492 525
-
diff --git a/abs/core/live-installer/templates/xorg/modeline.VESA b/abs/core/live-installer/templates/xorg/modeline.VESA
deleted file mode 100644
index a026f64..0000000
--- a/abs/core/live-installer/templates/xorg/modeline.VESA
+++ /dev/null
@@ -1,163 +0,0 @@
-# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "640x350"    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
-
-# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "640x400"    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
-
-# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "720x400"    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
-
-# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
-ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
-
-# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
-ModeLine "640x480"    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
-
-# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
-ModeLine "640x480"    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
-
-# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
-ModeLine "640x480"    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
-
-# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
-ModeLine "800x600"    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
-
-# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
-ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
-
-# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
-ModeLine "800x600"    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
-
-# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
-ModeLine "800x600"    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
-
-# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
-ModeLine "800x600"    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
-
-# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
-ModeLine "1024x768"   44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
-
-# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
-ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
-
-# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
-ModeLine "1024x768"   75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
-
-# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
-ModeLine "1024x768"   78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
-
-# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
-ModeLine "1024x768"   94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
-
-# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
-ModeLine "1152x864"  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
-
-# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
-ModeLine "1280x960"  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
-
-# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
-ModeLine "1280x960"  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
-
-# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
-ModeLine "1280x1024" 108.0 1280 1328 1440 1688   1024 1025 1028 1066 +hsync +vsync
-
-# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
-ModeLine "1280x1024" 135.0 1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
-
-# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
-ModeLine "1280x1024" 157.5 1280 1344 1504 1728   1024 1025 1028 1072 +hsync +vsync
-
-# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
-ModeLine "1600x1200" 162.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
-# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
-ModeLine "1600x1200" 175.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
-ModeLine "1600x1200" 189.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
-ModeLine "1600x1200" 202.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
-ModeLine "1600x1200" 229.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
-
-# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
-ModeLine "1792x1344" 204.8 1792 1920 2120 2448   1344 1345 1348 1394 -hsync +vsync
-
-# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
-ModeLine "1792x1344" 261.0 1792 1888 2104 2456   1344 1345 1348 1417 -hsync +vsync
-
-# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
-ModeLine "1856x1392" 218.3 1856 1952 2176 2528   1392 1393 1396 1439 -hsync +vsync
-
-# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
-ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 -hsync +vsync
-
-# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
-ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 -hsync +vsync
-
-# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
-ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 -hsync +vsync
-
-# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
-ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
-
-# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
-ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
-
-# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
-ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
-
-# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
-ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
-
-# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
-ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
-
-# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
-ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
-
-# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
-ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
-
-# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
-ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
-
-# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
-ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
-
-# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
-ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
-
-# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
-ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
-
-# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
-ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
-
-# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
-ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
-
-# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
-ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
-
-# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
-ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
-
-# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
-ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
-
-# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
-ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
-
-# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
-ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
-
-# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
-ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
-
-# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
-ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
-
-# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
-ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
diff --git a/abs/core/live-installer/templates/xorg/modeline.custom b/abs/core/live-installer/templates/xorg/modeline.custom
deleted file mode 100644
index ca6d678..0000000
--- a/abs/core/live-installer/templates/xorg/modeline.custom
+++ /dev/null
@@ -1 +0,0 @@
-ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace
diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.ati b/abs/core/live-installer/templates/xorg/xorg.conf.ati
deleted file mode 100644
index c6d9249..0000000
--- a/abs/core/live-installer/templates/xorg/xorg.conf.ati
+++ /dev/null
@@ -1,94 +0,0 @@
-Section "ServerLayout"
-	Identifier     "X.org Configured"
-	Screen      0  "aticonfig-Screen[0]" 0 0
-	InputDevice    "Mouse0" "CorePointer"
-	InputDevice    "Keyboard0" "CoreKeyboard"
-EndSection
-
-Section "Files"
-	RgbPath      "/usr/share/X11/rgb"
-	ModulePath   "/usr/lib/xorg/modules"
-	FontPath     "/usr/share/fonts/misc"
-	FontPath     "/usr/share/fonts/75dpi"
-	FontPath     "/usr/share/fonts/100dpi"
-	FontPath     "/usr/share/fonts/TTF"
-	FontPath     "/usr/share/fonts/Type1"
-EndSection
-
-Section "Module"
-	Load  "xtrap"
-	Load  "dbe"
-	Load  "record"
-	Load  "extmod"
-	Load  "dri"
-	Load  "type1"
-	Load  "freetype"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Keyboard0"
-	Driver      "kbd"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Mouse0"
-	Driver      "mouse"
-	Option	    "Protocol" "auto"
-	Option	    "Device" "/dev/input/mice"
-	Option	    "ZAxisMapping" "4 5 6 7"
-EndSection
-
-Section "Monitor"
-	Identifier   "Monitor0"
-	VendorName   "Monitor Vendor"
-	ModelName    "Monitor Model"
-EndSection
-
-Section "Monitor"
-	Identifier   "aticonfig-Monitor[0]"
-#	HorizSync    
-#	VertRefresh 
-	Option	    "VendorName" "ATI Proprietary Driver"
-	Option	    "ModelName" "Generic Autodetecting Monitor"
-	Option	    "DPMS" "true"
-EndSection
-
-Section "Device"
-
-        ### Available Driver options are:-
-        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
-        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
-        ### [arg]: arg optional
-        #Option     "ShadowFB"           	# [<bool>]
-        #Option     "DefaultRefresh"     	# [<bool>]
-        #Option     "ModeSetClearScreen" 	# [<bool>]
-	Identifier  "Card0"
-	Driver      "vesa"
-	VendorName  "ATI Technologies Inc"
-	BoardName   "RV370 5B60 [Radeon X300 (PCIE)]"
-	BusID       "PCI:1:0:0"
-EndSection
-
-Section "Device"
-	Identifier  "aticonfig-Device[0]"
-	Driver      "fglrx"
-#INSERT HERE
-
-#	Option	    "ForceMonitors" "tv,nocrt1,notmds1"
-#	Option	    "TVStandard" "SCART"
-#	Option	    "TVFormat" "PAL-B"
-EndSection
-
-
-Section "Screen"
-	Identifier "aticonfig-Screen[0]"
-	Device     "aticonfig-Device[0]"
-	Monitor    "aticonfig-Monitor[0]"
-	DefaultDepth     24
-	SubSection "Display"
-		Viewport   0 0
-		Depth     24
-		Modes    "640x480"
-	EndSubSection
-EndSection
-
diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.intel b/abs/core/live-installer/templates/xorg/xorg.conf.intel
deleted file mode 100644
index a4d258a..0000000
--- a/abs/core/live-installer/templates/xorg/xorg.conf.intel
+++ /dev/null
@@ -1,148 +0,0 @@
-Section "ServerLayout"
-	Identifier     "Xorg Configured"
-	Screen      0  "Screen0" 0 0
-	InputDevice    "Keyboard0" "CoreKeyboard"
-	InputDevice    "PS/2 Mouse" "CorePointer"
-# Serial Mouse not detected
-# USB Mouse not detected
-EndSection
-
-Section "ServerFlags"
-	Option "AllowMouseOpenFail"  "true"
-	
-EndSection
-
-Section "Files"
-	RgbPath      "/usr/share/X11/rgb"
-	ModulePath   "/usr/lib/xorg/modules"
-	FontPath     "/usr/share/fonts/misc:unscaled"
-	FontPath     "/usr/share/fonts/misc"
-	FontPath     "/usr/share/fonts/75dpi:unscaled"
-	FontPath     "/usr/share/fonts/75dpi"
-	FontPath     "/usr/share/fonts/100dpi:unscaled"
-	FontPath     "/usr/share/fonts/100dpi"
-	FontPath     "/usr/share/fonts/PEX"
-# Additional fonts: Locale, Gimp, TTF...
-	FontPath     "/usr/share/fonts/cyrillic"
-#	FontPath     "/usr/share/lib/X11/fonts/latin2/75dpi"
-#	FontPath     "/usr/share/lib/X11/fonts/latin2/100dpi"
-# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
-	FontPath     "/usr/share/fonts/Type1"
-	FontPath     "/usr/share/fonts/ttf/western"
-	FontPath     "/usr/share/fonts/ttf/decoratives"
-	FontPath     "/usr/share/fonts/truetype"
-	FontPath     "/usr/share/fonts/truetype/openoffice"
-	FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
-	FontPath     "/usr/share/fonts/latex-ttf-fonts"
-	FontPath     "/usr/share/fonts/defoma/CID"
-	FontPath     "/usr/share/fonts/defoma/TrueType"
-EndSection
-
-Section "Module"
-        Load  "ddc"  # ddc probing of monitor
-	Load  "dbe"
-	Load  "dri"
-	Load  "extmod"
-	Load  "glx"
-        Load  "bitmap" # bitmap-fonts
-	Load  "type1"
-	Load  "freetype"
-	Load  "record"
-EndSection
-
-Section "InputDevice"
-	Identifier  "Keyboard0"
-	Driver      "keyboard"
-        Option      "CoreKeyboard"
-	Option "XkbRules" "xorg"
-	Option "XkbModel" "pc105"
-	Option "XkbLayout" ""
-	Option "XkbVariant" ""
-EndSection
-
-Section "InputDevice"
-	Identifier  "Serial Mouse"
-	Driver      "mouse"
-	Option      "Protocol" "Microsoft"
-	Option      "Device" "/dev/ttyS0"
-	Option      "Emulate3Buttons" "true"
-	Option      "Emulate3Timeout" "70"
-	Option	    "SendCoreEvents"  "true"
-EndSection
-
-Section "InputDevice"
-	Identifier  "PS/2 Mouse"
-	Driver      "mouse"
-	Option      "Protocol" "auto"
-	Option          "ZAxisMapping"          "4 5"
-	Option      "Device" "/dev/psaux"
-	Option      "Emulate3Buttons" "true"
-	Option      "Emulate3Timeout" "70"
-	Option	    "SendCoreEvents"  "true"
-EndSection
-
-Section "InputDevice"
-        Identifier      "USB Mouse"
-        Driver          "mouse"
-        Option          "Device"                "/dev/input/mice"
-	Option		"SendCoreEvents"	"true"
-        Option          "Protocol"              "IMPS/2"
-        Option          "ZAxisMapping"          "4 5"
-        Option          "Buttons"               "5"
-EndSection
-
-# Auto-generated by Archie mkxcfg
-
-Section "Monitor"
-	Identifier "Monitor0"
-		Option "DPMS" "true"
-EndSection
-
-# Auto-generated by Archie mkxcfg
-
-Section "Device"
-	Identifier  "Card0"
-	Driver      "intel"
-	VendorName  "All"
-	BoardName   "All"
-EndSection
-
-Section "Screen"
-	Identifier "Screen0"
-	Device     "Card0"
-	Monitor    "Monitor0"
-	DefaultColorDepth 16
-	SubSection "Display"
-		Depth     1
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-	SubSection "Display"
-		Depth     4
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-	SubSection "Display"
-		Depth     8
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-	SubSection "Display"
-		Depth     15
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-	SubSection "Display"
-		Depth     16
-		Modes  "800x600" 
-		virtual 800 600 
-	EndSubSection
-	SubSection "Display"
-		Depth     24
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-	SubSection "Display"
-		Depth     32
-		Modes "1024x768" "800x600" "640x480"
-	EndSubSection
-EndSection
-
-Section "DRI"
-	Mode 0666
-EndSection
diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.nvidia b/abs/core/live-installer/templates/xorg/xorg.conf.nvidia
deleted file mode 100755
index dec0f42..0000000
--- a/abs/core/live-installer/templates/xorg/xorg.conf.nvidia
+++ /dev/null
@@ -1,90 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
-
-Section "ServerLayout"
-    Identifier     "Layout0"
-    Screen      0  "Screen0"
-    InputDevice    "Keyboard0" "CoreKeyboard"
-    InputDevice    "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
-    RgbPath         "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
-    Load           "dbe"
-    Load           "extmod"
-    Load           "type1"
-    Load           "freetype"
-    Load           "glx"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Mouse0"
-    Driver         "mouse"
-    Option         "Protocol" "auto"
-    Option         "Device" "/dev/psaux"
-    Option         "Emulate3Buttons" "no"
-    Option         "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Keyboard0"
-    Driver         "keyboard"
-EndSection
-
-Section "Monitor"
-    Identifier     "Monitor0"
-    VendorName     "Unknown"
-    ModelName      "Unknown"
-#    HorizSync       
-#    VertRefresh    
-    Option         "DPMS" "false"
-    DisplaySize  203 153
-    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
-    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
-    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
-    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
-    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-#INSERT MODELINE
-EndSection
-
-Section "Device"
-    Identifier     "Device0"
-    Driver         "nvidia"
-    VendorName     "NVIDIA Corporation"
-    Option "DPI" "100 x 100"
-    Option "NoLogo" "1"    
-	
-#INSERT HERE
-
-#END OPTIONS
-
-#    Option "ConnectedMonitor" "DFP"
-#    Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled"
-#    Option "DigitalVibrance" "0"
-#    Option "TransparentIndex" "0"
-#    Option  "CursorShadowAlpha" "64"
-#    Option  "CursorShadowXOffset"  "4"
-#    Option  "UseEdidFreqs" "True"
-#    Option  "NvAGP" "1"
- 
-
-
-
-EndSection
-
-Section "Screen"
-    Identifier     "Screen0"
-    Device         "Device0"
-    Monitor        "Monitor0"
-    DefaultDepth    24
-    SubSection     "Display"
-        Depth       24
-        Modes     "1280x720" 
-    EndSubSection
-EndSection
-
diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.via b/abs/core/live-installer/templates/xorg/xorg.conf.via
deleted file mode 100644
index 6dd7821..0000000
--- a/abs/core/live-installer/templates/xorg/xorg.conf.via
+++ /dev/null
@@ -1,77 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
-
-Section "ServerLayout"
-    Identifier     "Layout0"
-    Screen      0  "Screen0"
-    InputDevice    "Keyboard0" "CoreKeyboard"
-    InputDevice    "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
-    RgbPath         "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
-    Load           "dbe"
-    Load           "glx"
-    Load           "extmod"
-    Load           "type1"
-    Load           "freetype"
-    Load           "dri"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Mouse0"
-    Driver         "mouse"
-    Option         "Protocol" "auto"
-    Option         "Device" "/dev/psaux"
-    Option         "Emulate3Buttons" "no"
-    Option         "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Keyboard0"
-    Driver         "keyboard"
-EndSection
-
-Section "Monitor"
-    Identifier     "Monitor0"
-    VendorName     "Unknown"
-    ModelName      "Unknown"
-    HorizSync       30.0 - 110.0
-    VertRefresh     50.0 - 150.0
-    Option         "DPMS" "false"
-    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
-    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
-    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
-    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
-    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-EndSection
-
-Section "Device"
-    Identifier     "Device0"
-    Driver         "via"
-    VendorName     "via"
-    Option "DPI" "100 x 100"
-
-
-EndSection
-
-Section "Screen"
-    Identifier     "Screen0"
-    Device         "Device0"
-    Monitor        "Monitor0"
-    DefaultDepth    16
-    SubSection     "Display"
-        Depth       16
-	 Modes "800x600"
-    EndSubSection
-EndSection
-
-Section "DRI"
-	  Group   "video"
-	    Mode    0666
-    EndSection
diff --git a/abs/core/live-installer/templates/xorg/xorg.conf.vmware b/abs/core/live-installer/templates/xorg/xorg.conf.vmware
deleted file mode 100755
index 843f2f4..0000000
--- a/abs/core/live-installer/templates/xorg/xorg.conf.vmware
+++ /dev/null
@@ -1,72 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Tue Aug  1 21:11:12 PDT 2006
-
-Section "ServerLayout"
-    Identifier     "Layout0"
-    Screen      0  "Screen0"
-    InputDevice    "Keyboard0" "CoreKeyboard"
-    InputDevice    "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
-    RgbPath         "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
-    Load           "dbe"
-    Load           "extmod"
-    Load           "type1"
-    Load           "freetype"
-    Load           "glx"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Mouse0"
-    Driver         "mouse"
-    Option         "Protocol" "auto"
-    Option         "Device" "/dev/psaux"
-    Option         "Emulate3Buttons" "no"
-    Option         "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
-    # generated from default
-    Identifier     "Keyboard0"
-    Driver         "keyboard"
-EndSection
-
-Section "Monitor"
-    Identifier     "Monitor0"
-    VendorName     "Unknown"
-    ModelName      "Unknown"
-    HorizSync       30.0 - 110.0
-    VertRefresh     50.0 - 150.0
-    Option         "DPMS" "false"
-    Modeline  "1280x720" 74.25   1280 1316 1452 1644    720  720  723  751 -hsync +vsync
-    Modeline  "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
-    ModeLine  "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
-    Modeline  "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync 
-    ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-EndSection
-
-Section "Device"
-    Identifier     "Device0"
-    Driver         "vmware"
-    VendorName     "NVIDIA Corporation"
-    Option "DPI" "100 x 100"
-
-
-EndSection
-
-Section "Screen"
-    Identifier     "Screen0"
-    Device         "Device0"
-    Monitor        "Monitor0"
-    DefaultDepth    24
-    SubSection     "Display"
-        Depth       24
-        Modes     "1280x720" 
-    EndSubSection
-EndSection
-
diff --git a/abs/core/live-installer/timezip.py b/abs/core/live-installer/timezip.py
deleted file mode 100755
index 505b4a4..0000000
--- a/abs/core/live-installer/timezip.py
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/usr/bin/python
-# import MySQL module
-#used to import the zipcode/timezone/nfs info fromMBE
-import MySQLdb
-import sys
-import getopt
-import socket
-
-
-def usage():
-    print " -h --help"
-    print " -d  --installdb"
-    print " -m --masterdb"
-    print " -n  --hostname of current machine"
-
-def printvars():
-    print "masterdb: " + masterdb
-    print "installdb:" + installdb
-    print "hostname: " + thishostname
-    print "BEhostname:" + BEhostname
-    print "zipcode:" + zipcode
-    print "timezone:" + tz
-    print "nfsip:" + nfsip
-    print "nfstoggle:" + nfstoggle
-    print "nfsmount:"  + nfsmount
-    print "hobbitclient:" + hobbitclient
-# connect
-def selectvars():
-
-    global BEhostname
-    global zipcode
-    global tz
-    global nfsip
-    global nfstoggle
-    global nfsmount
-    global hobbitclient
-
-    db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="[REDACTED] db="mythconverg")
-    # create a cursor
-    cursor = db.cursor()
-    # execute SQL statement
-    cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb))
-    result = cursor.fetchone()
-    BEhostname=result[0]
-
-    cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname))
-    result = cursor.fetchone()
-    try:
-        zipcode =  result[0]
-    except TypeError:
-        zipcode=""
-
-    cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname))
-    result = cursor.fetchone()
-    try:
-        nfsip=result[0]
-    except TypeError:
-        nfsip=""
-
-    cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname))
-    result = cursor.fetchone()
-    try:
-        nfstoggle=result[0]
-    except TypeError:
-        nfstoggle=""
-
-    cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname))
-    result = cursor.fetchone()
-    try:
-        nfsmount=result[0]
-    except TypeError:
-        nfsmount=""
-
-    cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname))
-    result = cursor.fetchone()
-    try:
-        tz=result[0]
-    except TypeError:
-        tz=""
-
-    if  ( thishostname != BEhostname ):
-        cursor.execute("select data from settings where value='GlobalServiceHobbitserver'")
-        result = cursor.fetchone()
-        try:
-            hobbitclient=result[0]
-        except TypeError:
-            hobbitclient="0"
-
-
-
-def insertvars():
-
-    db = MySQLdb.connect(host=installdb, user="mythtv", passwd="[REDACTED] db="mythconverg")
-    cursor = db.cursor()
-#inserting the zipcode
-    cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname))
-    result = cursor.fetchone()
-    if ( zipcode!="" ):
-        if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname))
-            print "inserting zipcode"
-        else:
-            cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname))
-            print "updating zipcode"
-
-#inserting the timezone
-    cursor.execute("select *  from settings where value='HostTimeZone' and hostname=(%s)",(thishostname))
-    result = cursor.fetchone()
-    if ( tz != ""):
-         if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname))
-            print "inserting timezone"
-         else:
-            cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname))
-            print "updating timezone"
-
-
-#start of NFSIP
-    cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname))
-    result = cursor.fetchone()
-    if ( nfsip != ""):
-        if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname))
-            print "inserting nfsip"
-
-    if (nfstoggle != ""):
-        cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname))
-        result = cursor.fetchone()
-        if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname))
-            print "inserting nfstoggle"
-
-    if ( nfsmount !="") :
-        cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname))
-        result = cursor.fetchone()
-        if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname))
-            print "inserting nfsmountpoint"
-
-#hobbitclient
-    cursor.execute("select *  from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname))
-    result = cursor.fetchone()
-    if ( tz != ""):
-         if (result == None):
-            cursor.execute("INSERT INTO  settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname))
-            print "inserting hobbitcleint"
-         else:
-            cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname))
-            print "updating hobbitclient"
-
-
-def main(argv):
-    global masterdb
-    global installdb
-    global thishostname
-    thishostname=""
-    global BEhostname
-    global zipcode
-    global tz
-    global nfsip
-    global hobbitclient
-    try:
-        opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] )
-    except getopt.GetoptError:
-        sys.exit(2)
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-             usage()
-             sys.exit()
-        elif opt in ( "-d" , "--installdb"):
-             installdb = arg
-        elif opt in ("-m", "--masterdb"):
-             masterdb = arg
-        elif opt in ("-n", "--hostname"):
-             thishostname = arg
-
-    if ( thishostname == "" ):
-         thishostname = socket.gethostname()
-
-    selectvars()
-    printvars()
-    insertvars()
-if __name__ == "__main__":
-    main(sys.argv[1:])
-
diff --git a/abs/core/live-installer/xconfig.sh b/abs/core/live-installer/xconfig.sh
deleted file mode 100755
index 42603d6..0000000
--- a/abs/core/live-installer/xconfig.sh
+++ /dev/null
@@ -1,233 +0,0 @@
-#!/bin/bash
-BASE=""
-. /etc/profile
-#TEMPLATES="/usr/share/templates"
-
-function Xvalues {
-    VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2`
-    echo $VGACARDTYPE
-    currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '`
-    }
-
-function presetupX {
-if [ x$XUseAdvanced =  x1 ]
-then
-    if  [ x$XIgnoreConfig  = x1 ]
-    then
-        echo "Using User supplied X"
-        if [ -f  $BASE/data/home/mythtv/templates/xorg.user ]
-        then
-            cp -f  $BASE/data/home/mythtv/templates/xorg.user  $XORG_CONF
-        else
-            echo "Didn't find the file"
-            echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use  " >>  $XORG_CONF
-         fi
-    else
-    setupAdvancedX
-    fi
-else
-      setupX
-fi
-
-}
-
-function setupAdvancedX {
-echo "#doing the advanced" > /tmp/options
-        Xcatagory=` echo $Xresadvanced |cut -d_ -f1`
-        Xres=` echo $Xresadvanced |cut -d_ -f2`
-        echo $Xcatagory
-        if [ x$Xcatagory = "xNvidia" ]
-        then
-            Xres=""
-            if [  $XnVidia1080p = "1" ]
-            then
-                Xres="${Xres} \"1920x1080_60\""
-            fi
-            if [  $XnVidia1080i = "1" ]
-            then
-                Xres="${Xres}  \"1920x1080_60i\""
-            fi
-            if [  $XnVidia720p = "1" ]
-            then
-                Xres="${Xres}  \"1280x720_60\""
-            fi
-            if [  $XnVidia480p = "1" ]
-            then
-                Xres="${Xres}  \"720x480_60\""
-            fi
-                ML="\t Modes ${Xres}"
-        else
-
-         ML="\t Modes \"${Xres}\""
-        fi
-        echo $ML
-    case $Xcardtype in
-        NVIDIA|nVidia )
-
-                         case $Xconnection in
-                                DVI)    ConnectedMonitor=DFP ;;
-                                vga)    ConnectedMonitor=CRT;;
-                                Auto)   ConnectedMonitor=Auto;;
-                                TV)    ConnectedMonitor=TV
-                                          echo "Option \"TVStandard\" \"$XTVstandard\""  >>/tmp/options
-                                          echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options
-                                           ;;
-                            esac
-                            if [ $ConnectedMonitor = Auto ]
-                            then
-                              echo "auto connection"
-                            else
-                             echo    "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options
-                             echo    "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options
-                            echo    "Option \"DigitalVibrance\" \"0\"" >> /tmp/options
-                            fi
-
-                            if  [ x$XignoreEDID = x1 ]
-                                    then
-                                        EDIDvalue=true
-                                        EDIDFREQ=false
-                                        DS="     DisplaySize $XDisplaysize"
-                                        HS="    HorizSync  $XHsync"
-                                        VR="    VertRefresh $XVrefresh"
-                                      else
-                                        EDIDvalue=false
-                                        EDIDFREQ=true
-                                        DS="# Display size edid used "
-                                        HS="#Hsync edid used "
-                                        VR="#Vertrefresh edid used "
-
-                            fi
-                            echo   "Option  \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options
-                            echo   "Option  \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options
-
-
-                sed -e "s/^.*Modes.*$/${ML}/" \
-                       -e "/INSERT MODELINE/r  $TEMPLATES/xorg/modeline.$Xcatagory" \
-                       -e "s/^.*DisplaySize.*$/  $DS/" \
-                       -e "s/^#.*HorizSync.*$/ $HS/g" \
-		       -e "s/^#.*VertRefresh.*$/ $VR/g" \
-                       -e "/INSERT HERE/r /tmp/options"  $TEMPLATES/xorg/xorg.conf.nvidia  > $XORG_CONF
-
-          ;;
-         ati|ATI)
-	 	 case $Xconnection in
-                                DVI)    ConnectedMonitor="tmds1,nocrt1,notv";;
-                                VGA)    ConnectedMonitor="crt1,notmds1,notv" ;;
-                                TV)    ConnectedMonitor="tv,nocrt1,notmds1"
-                                       echo "Option \"TVStandard\" \"$XTVstandard\""  >>/tmp/options
-                                       echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options
-					;;
-
- 		esac
-
-
-                      if  [ x$XignoreEDID = x1 ]
-                                    then
-                                        DS="     DisplaySize $XDisplaysize"
-                                        HS="    HorizSync  $XHsync"
-                                        VR="    VertRefresh $XVrefresh"
-                                      else
-                                                        DS="# Display size edid used "
-                                        HS="#Hsync edid used "
-                                        VR="#Vertrefresh edid used "
-
-                            fi
-
-		echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options
-
-                  sed -e "s/^.*Modes.*$/\t $ML/" \
-                     -e "/INSERT MODELINE/r  $TEMPLATES/xorg/modeline.$Xcatagory" \
-                     -e "s/^.*DisplaySize.*$/  $DS/" \
-                     -e "s/^#.*HorizSync.*$/ $HS/g" \
-		     -e "s/^#.*VertRefresh.*$/ $VR/g" \
-		     -e "/INSERT HERE/r /tmp/options"  $TEMPLATES/xorg/xorg.conf.ati  > $XORG_CONF
-	;;
-
-        via|VIA|Via) echo "no via here"
-            ;;
-
-        *)
-                echo "unknown card type"
-        ;;
-    esac
-}
-
-
-
-function setupX {
-    Xvalues
-    echo "$currentmode  ____    ${Xres}"
-    #if [ !  x${currentmode} = x\"${Xres}\" ]
-    if [   x = x ]
-    then
-        case $VGACARDTYPE in
-            nVidia )
-                    sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF
-                    if [ !  x$TESTMODE = "xtest" ]
-                    then
-                            pacman --noconfirm  -R libgl-dri
-#                            pacman --noconfirm  -S nvidia-STB nvidia-utils
-                            pacman --noconfirm  -S nvidia nvidia-utils
-                    fi
-                                ;;
-            VMware )
-                       sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF
-                    ;;
-
-            VIA )
-                    sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF
-                    if [ ! x$TESTMODE = "xtest" ]
-                    then
-                        pacman --noconfirm  -R nvidia-STB nvidia-utils
-                        pacman --noconfirm  -S libgl-dri
-                    fi
-
-                    ;;
-             Intel)
-                    sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF
-                    if [ !  x$TESTMODE = "xtest" ]
-                    then
-                            pacman --noconfirm  -Rd nvidia-utils
-                            pacman --noconfirm -S libgl-dri
-                    fi
-                                ;;
-
-	*)  #XCONF=`hwd -x |grep etc`
-        XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-`
-
-         
-  		   cat /$XCONF |grep -v Modes | sed -e '/Depth     16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF
-		;;
-        esac
-    fi
-
-}
-
-#MAIN
-TESTMODE=$1
-if [ x$TESTMODE = "xtest" ]
-then
-    XORG_CONF="/tmp/xorg.conf.test"
-    XUseAdvanced="1"
-    XIgnoreConfig="${2}"
-    Xcardtype="${3}"
-    XIgnoreEDID="${4}"
-    Xconnection="${5}"
-    XHsync="${6}"
-    XVrefresh="${7}"
-    Xresadvanced="${8}"
-    XTVstandard="${9}"
-    XTVconnection="${10}"
-    XDisplaysize="${11}"
-else
-    if [ -f   /etc/systemconfig ]
-    then
-        . /etc/systemconfig
-    else
-        Xres="800x600"
-    fi
-    XORG_CONF="/etc/X11/xorg.conf"
-fi
-presetupX
-
-
-- 
cgit v0.12

