From 6c8f178b6c8874623e780d2c049a49b780237654 Mon Sep 17 00:00:00 2001
From: James Meyer <james.meyer@operamail.com>
Date: Fri, 7 Nov 2008 19:55:11 -0600
Subject: rename live-installer to LinHES-config
---
abs/core-testing/LinHES-config/LinHES-release | 1 +
abs/core-testing/LinHES-config/LinHES.install | 78 ++
abs/core-testing/LinHES-config/MythVantage.sh | 3 +
abs/core-testing/LinHES-config/PKGBUILD | 63 +
abs/core-testing/LinHES-config/add_service.sh | 15 +
abs/core-testing/LinHES-config/autocard.py | 302 +++++
abs/core-testing/LinHES-config/bpopup-ui.xml | 164 +++
abs/core-testing/LinHES-config/build_diskless.sh | 143 +++
.../LinHES-config/checkout_MythVantage.sh | 47 +
abs/core-testing/LinHES-config/create_master.sh | 57 +
abs/core-testing/LinHES-config/file_time_offset.py | 39 +
abs/core-testing/LinHES-config/install-ui.xml | 175 +++
.../LinHES-config/install_db_chroot.sh | 52 +
.../LinHES-config/install_functions.sh | 449 +++++++
abs/core-testing/LinHES-config/install_proxy.sh | 526 ++++++++
abs/core-testing/LinHES-config/issue | 1 +
abs/core-testing/LinHES-config/live-install.sh | 28 +
abs/core-testing/LinHES-config/myth_user_call | 164 +++
abs/core-testing/LinHES-config/networkconfig.sh | 280 +++++
abs/core-testing/LinHES-config/remove_service.sh | 8 +
.../LinHES-config/restore_default_settings.sh | 349 ++++++
.../LinHES-config/restore_km_db_chroot.sh | 53 +
abs/core-testing/LinHES-config/soundconfig.sh | 248 ++++
abs/core-testing/LinHES-config/startx | 29 +
abs/core-testing/LinHES-config/systemconfig.sh | 1255 +++++++++++++++++++
.../templates/LCD/Shuttle-SG33/LCDd.conf | 869 +++++++++++++
.../templates/LCD/Silverstone/LCDd.conf | 869 +++++++++++++
.../templates/LCD/Silverstone/modules | 1 +
.../templates/LCD/antec_fusion/LCDd.conf | 869 +++++++++++++
.../templates/LCD/antec_fusion/lircd.conf | 38 +
.../templates/LCD/antec_fusion/lircrc | 15 +
.../templates/LCD/antec_fusion/modules | 1 +
.../LinHES-config/templates/LCD/xosd/LCDd.conf | 957 ++++++++++++++
.../LinHES-config/templates/cc.orig.sh | 35 +
abs/core-testing/LinHES-config/templates/cc.sh | 5 +
abs/core-testing/LinHES-config/templates/cc_vol.sh | 5 +
.../LinHES-config/templates/change_chan.sh | 19 +
.../LinHES-config/templates/cron.template | 4 +
.../LinHES-config/templates/etcnet/eth/ipv4address | 2 +
.../LinHES-config/templates/etcnet/eth/ipv4route | 2 +
.../LinHES-config/templates/etcnet/eth/iwconfig | 2 +
.../LinHES-config/templates/etcnet/eth/options | 7 +
.../LinHES-config/templates/evrouter/MythVantage-4 | 0
.../LinHES-config/templates/evrouter/MythVantage-8 | 0
.../templates/evrouter/MythVantage-Full | 0
.../templates/evrouter/MythVantage8-minipac | 3 +
.../templates/evrouter/MythVantage8-uhid | 3 +
.../LinHES-config/templates/exports.template | 8 +
.../LinHES-config/templates/fstab.conf.template | 16 +
.../LinHES-config/templates/mysql.service | 13 +
abs/core-testing/LinHES-config/templates/mysql.txt | 29 +
.../LinHES-config/templates/ncid.conf.template | 51 +
.../LinHES-config/templates/ncidd.conf.template | 143 +++
.../LinHES-config/templates/real_change_chan.sh | 19 +
.../templates/remotes/ATI_wonder/lircd.ATI.conf | 357 ++++++
.../remotes/ATI_wonder/lircrc-atiwonder.txt | 922 ++++++++++++++
.../templates/remotes/ATI_wonder/preview.jpg | Bin 0 -> 63480 bytes
.../remotes/MX-500-jams/lircd.conf.MX-500-JAMS | 115 ++
.../templates/remotes/MX-500-jams/lircrc | 832 +++++++++++++
.../templates/remotes/MX-500-jams/preview.jpg | Bin 0 -> 10473 bytes
.../templates/remotes/MythVantage-one/lircd.conf | 115 ++
.../templates/remotes/MythVantage-one/lircrc | 857 +++++++++++++
.../templates/remotes/MythVantage-one/preview.jpg | Bin 0 -> 88727 bytes
.../RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf | 87 ++
.../RadioShack_15-2116-Jarod_Wilson/lircrc-rs | 539 ++++++++
.../RadioShack_15-2116-Jarod_Wilson/preview.jpg | Bin 0 -> 7504 bytes
.../templates/remotes/adaptec/lircd.conf.AVC-2410 | 62 +
.../templates/remotes/animax/lircd.conf.animax | 199 +++
.../templates/remotes/animax/lircmd.conf.animax | 71 ++
.../templates/remotes/animax/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/asus/lircd.conf.asus | 56 +
.../templates/remotes/asus/lircd.conf.digimatrix | 152 +++
.../templates/remotes/atiusb/lircd.conf.atiusb | 1259 +++++++++++++++++++
.../remotes/avermedia/lircd.conf.avermedia | 72 ++
.../remotes/avermedia/lircd.conf.avermedia98 | 175 +++
.../templates/remotes/avermedia/lircd.conf.vdomate | 61 +
.../remotes/avermedia/lircmd.conf.avermedia | 33 +
.../remotes/avermedia/lircmd.conf.avermedia98 | 37 +
.../templates/remotes/avermedia/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/bestbuy/lircd.conf.bestbuy | 63 +
.../templates/remotes/bestbuy/lircd.conf.bestbuy2 | 59 +
.../templates/remotes/bestbuy/lircmd.conf.bestbuy | 33 +
.../templates/remotes/bestbuy/lircmd.conf.bestbuy2 | 34 +
.../templates/remotes/caraca/lircd.conf.caraca | 46 +
.../templates/remotes/caraca/lircrc.caraca | 134 ++
.../templates/remotes/caraca/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/chronos/lircd.conf.chronos | 56 +
.../templates/remotes/cph03x/lircd.conf.cph03x | 72 ++
.../templates/remotes/creative/lircd.conf.alsa_usb | 56 +
.../remotes/creative/lircd.conf.breakoutbox | 55 +
.../templates/remotes/creative/lircd.conf.creative | 59 +
.../templates/remotes/creative/lircd.conf.infracd | 61 +
.../remotes/creative/lircd.conf.livedrive | 115 ++
.../templates/remotes/dvico/lircd.conf.fusionHDTV | 221 ++++
.../templates/remotes/ea65/lircd.conf.ea65 | 73 ++
.../templates/remotes/ea65/lircrc.ea65 | 381 ++++++
.../templates/remotes/ea65/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/ericsson/lircd.conf.bte | 53 +
.../templates/remotes/generic/DENON.conf | 31 +
.../templates/remotes/generic/MOTOROLA.conf | 53 +
.../templates/remotes/generic/NEC-pulse.conf | 32 +
.../templates/remotes/generic/NEC-short-pulse.conf | 34 +
.../templates/remotes/generic/NEC.conf | 30 +
.../templates/remotes/generic/RC-5.conf | 30 +
.../templates/remotes/generic/RC-6.conf | 28 +
.../templates/remotes/generic/RCMM-32.conf | 23 +
.../templates/remotes/generic/RECS80.conf | 31 +
.../templates/remotes/generic/SANYO.conf | 34 +
.../templates/remotes/generic/SONY12.conf | 28 +
.../templates/remotes/generic/SONY20.conf | 29 +
.../templates/remotes/gr8zap/lircd.conf.streamzap | 69 ++
.../LinHES-config/templates/remotes/gr8zap/lircrc | 472 +++++++
.../templates/remotes/gr8zap/preview.jpg | Bin 0 -> 83195 bytes
.../remotes/hauppauge/lircd.conf.hauppauge | 274 ++++
.../remotes/hauppauge/lircmd.conf.hauppauge | 33 +
.../templates/remotes/hauppauge/preview.jpg | Bin 0 -> 45763 bytes
.../remotes/hercules/lircd.conf.smarttv_stereo | 63 +
.../templates/remotes/imon-pad/lircd.conf | 88 ++
.../templates/remotes/imon-pad/lircrc | 240 ++++
.../templates/remotes/imon-pad/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/imon/lircd.conf.imon | 79 ++
.../templates/remotes/imon/lircd.conf.imon-pad | 84 ++
.../templates/remotes/imon/lircd.conf.imon-rsc | 109 ++
.../templates/remotes/iodata/lircd.conf.gvbctv5pci | 68 +
.../templates/remotes/km_ready_preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/knc_one/lircd.conf.knc_one | 62 +
.../templates/remotes/kworld/lircd.conf.kworld | 144 +++
.../templates/remotes/leadtek/lircd.conf.PVR2000 | 75 ++
.../templates/remotes/leadtek/lircd.conf.RM-0007 | 86 ++
.../templates/remotes/leadtek/lircd.conf.RM-0010 | 101 ++
.../templates/remotes/leadtek/lircmd.conf.RM-0007 | 36 +
.../templates/remotes/leadtek/lircmd.conf.RM-0010 | 36 +
.../remotes/life-view/lircd.conf.flyvideo | 87 ++
.../remotes/life-view/lircmd.conf.flyvideo | 33 +
.../templates/remotes/life-view/lircrc.flyvideo | 131 ++
.../templates/remotes/life-view/preview.jpg | Bin 0 -> 15108 bytes
.../templates/remotes/logitech/lircd.conf.logitech | 111 ++
.../remotes/logitech/lircmd.conf.logitech | 64 +
.../templates/remotes/mceusb/lircd-mceusb.conf | 88 ++
.../templates/remotes/mceusb/lircd.conf.mceusb | 104 ++
.../templates/remotes/mceusb/lircrc-mceusb | 393 ++++++
.../templates/remotes/mceusb/preview.jpg | Bin 0 -> 12551 bytes
.../templates/remotes/no_remote/preview.jpg | Bin 0 -> 3087 bytes
.../remotes/packard_bell/lircd.conf.packard_bell | 94 ++
.../templates/remotes/pcmak/lircd.conf.pcmak | 116 ++
.../templates/remotes/pcmak/lircmd.conf.pcmak | 29 +
.../templates/remotes/pcmak/lircrc.pcmak | 1310 ++++++++++++++++++++
.../templates/remotes/pcmak/preview.jpg | Bin 0 -> 15108 bytes
.../remotes/pinnacle_systems/lircd.conf.pctv | 94 ++
.../templates/remotes/pixelview/lircd.conf.playtv | 34 +
.../remotes/pixelview/lircd.conf.playtv_bt878 | 54 +
.../remotes/pixelview/lircd.conf.playtv_pro | 159 +++
.../remotes/pixelview/lircd.conf.remotemaster | 117 ++
.../remotes/pixelview/lircmd.conf.playtv_pro | 29 +
.../remotes/pixelview/lircmd.conf.remotemaster | 31 +
.../templates/remotes/pixelview/lircrc.playtv_pro | 134 ++
.../templates/remotes/provideo/lircd.conf.pv951 | 67 +
.../templates/remotes/receiver_usb.id | 33 +
.../templates/remotes/remotec/lircd.conf.BW6130 | 88 ++
.../templates/remotes/remotec/lircmd.conf.BW6130 | 291 +++++
.../templates/remotes/sasem/lircd.conf.sasem | 81 ++
.../remotes/sigma_designs/lircd.conf.realmagic | 83 ++
.../templates/remotes/silitek/lircd.conf.silitek | 97 ++
.../templates/remotes/silitek/lircmd.conf.silitek | 72 ++
.../remotes/snapstream_firefly/lircd.snapstrm.conf | 127 ++
.../remotes/snapstream_firefly/lircrc-snapstrm.txt | 590 +++++++++
.../remotes/snapstream_firefly/preview.jpg | Bin 0 -> 63750 bytes
.../remotes/streamzap/lircd.conf.streamzap | 69 ++
.../templates/remotes/streamzap/lircrc | 832 +++++++++++++
.../templates/remotes/streamzap/preview.jpg | Bin 0 -> 83195 bytes
.../remotes/technisat/lircd.conf.mediafocusI | 42 +
.../templates/remotes/tekram/lircd.conf.m230 | 48 +
.../templates/remotes/tekram/lircmd.conf.m230 | 33 +
.../templates/remotes/unknown/preview.jpg | Bin 0 -> 1587 bytes
.../templates/remotes/x10/lircd.conf.mouseremote | 116 ++
.../templates/remotes/x10/lircd.conf.mp3anywhere | 64 +
.../templates/remotes/x10/lircmd.conf.mouseremote | 288 +++++
.../LinHES-config/templates/samba/smb.conf.home | 10 +
.../LinHES-config/templates/samba/smb.conf.media | 10 +
.../templates/samba/smb.conf.template | 125 ++
.../templates/settings/default_1/keybindings.txt | 209 ++++
.../templates/settings/default_1/settings.txt | 320 +++++
.../templates/settings/default_2/keybindings.txt | 209 ++++
.../templates/settings/default_2/settings.txt | 320 +++++
.../LinHES-config/templates/sources/mv-core | 2 +
.../templates/sources/mv-core-testing | 2 +
.../LinHES-config/templates/sources/mv-extra | 2 +
.../templates/sources/mv-extra-testing | 2 +
.../LinHES-config/templates/sources/svc_pkg | 3 +
.../transmit/Time_Warner_SA3250/lircd.conf | 413 ++++++
.../LinHES-config/templates/xine.config.template | 754 +++++++++++
.../LinHES-config/templates/xorg/modeline.ATSC | 33 +
.../LinHES-config/templates/xorg/modeline.DVD | 9 +
.../LinHES-config/templates/xorg/modeline.NTSC | 10 +
.../LinHES-config/templates/xorg/modeline.VESA | 163 +++
.../LinHES-config/templates/xorg/modeline.custom | 1 +
.../LinHES-config/templates/xorg/xorg.conf.ati | 94 ++
.../LinHES-config/templates/xorg/xorg.conf.intel | 148 +++
.../LinHES-config/templates/xorg/xorg.conf.nvidia | 90 ++
.../LinHES-config/templates/xorg/xorg.conf.via | 77 ++
.../LinHES-config/templates/xorg/xorg.conf.vmware | 72 ++
abs/core-testing/LinHES-config/timezip.py | 185 +++
abs/core-testing/LinHES-config/timezone.bin | Bin 0 -> 805819 bytes
abs/core-testing/LinHES-config/xconfig.sh | 233 ++++
abs/core-testing/live-installer/LinHES-release | 1 -
abs/core-testing/live-installer/MythVantage.sh | 3 -
abs/core-testing/live-installer/PKGBUILD | 62 -
abs/core-testing/live-installer/add_service.sh | 15 -
abs/core-testing/live-installer/autocard.py | 302 -----
abs/core-testing/live-installer/bpopup-ui.xml | 164 ---
abs/core-testing/live-installer/build_diskless.sh | 143 ---
.../live-installer/checkout_MythVantage.sh | 47 -
abs/core-testing/live-installer/create_master.sh | 57 -
.../live-installer/file_time_offset.py | 39 -
abs/core-testing/live-installer/install-ui.xml | 175 ---
.../live-installer/install_db_chroot.sh | 52 -
.../live-installer/install_functions.sh | 449 -------
abs/core-testing/live-installer/install_proxy.sh | 526 --------
abs/core-testing/live-installer/issue | 1 -
abs/core-testing/live-installer/live-install.sh | 28 -
abs/core-testing/live-installer/live.install | 78 --
abs/core-testing/live-installer/myth_user_call | 164 ---
abs/core-testing/live-installer/networkconfig.sh | 280 -----
abs/core-testing/live-installer/remove_service.sh | 8 -
.../live-installer/restore_default_settings.sh | 349 ------
.../live-installer/restore_km_db_chroot.sh | 53 -
abs/core-testing/live-installer/soundconfig.sh | 248 ----
abs/core-testing/live-installer/startx | 29 -
abs/core-testing/live-installer/systemconfig.sh | 1255 -------------------
.../templates/LCD/Shuttle-SG33/LCDd.conf | 869 -------------
.../templates/LCD/Silverstone/LCDd.conf | 869 -------------
.../templates/LCD/Silverstone/modules | 1 -
.../templates/LCD/antec_fusion/LCDd.conf | 869 -------------
.../templates/LCD/antec_fusion/lircd.conf | 38 -
.../templates/LCD/antec_fusion/lircrc | 15 -
.../templates/LCD/antec_fusion/modules | 1 -
.../live-installer/templates/LCD/xosd/LCDd.conf | 957 --------------
.../live-installer/templates/cc.orig.sh | 35 -
abs/core-testing/live-installer/templates/cc.sh | 5 -
.../live-installer/templates/cc_vol.sh | 5 -
.../live-installer/templates/change_chan.sh | 19 -
.../live-installer/templates/cron.template | 4 -
.../templates/etcnet/eth/ipv4address | 2 -
.../live-installer/templates/etcnet/eth/ipv4route | 2 -
.../live-installer/templates/etcnet/eth/iwconfig | 2 -
.../live-installer/templates/etcnet/eth/options | 7 -
.../templates/evrouter/MythVantage-4 | 0
.../templates/evrouter/MythVantage-8 | 0
.../templates/evrouter/MythVantage-Full | 0
.../templates/evrouter/MythVantage8-minipac | 3 -
.../templates/evrouter/MythVantage8-uhid | 3 -
.../live-installer/templates/exports.template | 8 -
.../live-installer/templates/fstab.conf.template | 16 -
.../live-installer/templates/mysql.service | 13 -
.../live-installer/templates/mysql.txt | 29 -
.../live-installer/templates/ncid.conf.template | 51 -
.../live-installer/templates/ncidd.conf.template | 143 ---
.../live-installer/templates/real_change_chan.sh | 19 -
.../templates/remotes/ATI_wonder/lircd.ATI.conf | 357 ------
.../remotes/ATI_wonder/lircrc-atiwonder.txt | 922 --------------
.../templates/remotes/ATI_wonder/preview.jpg | Bin 63480 -> 0 bytes
.../remotes/MX-500-jams/lircd.conf.MX-500-JAMS | 115 --
.../templates/remotes/MX-500-jams/lircrc | 832 -------------
.../templates/remotes/MX-500-jams/preview.jpg | Bin 10473 -> 0 bytes
.../templates/remotes/MythVantage-one/lircd.conf | 115 --
.../templates/remotes/MythVantage-one/lircrc | 857 -------------
.../templates/remotes/MythVantage-one/preview.jpg | Bin 88727 -> 0 bytes
.../RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf | 87 --
.../RadioShack_15-2116-Jarod_Wilson/lircrc-rs | 539 --------
.../RadioShack_15-2116-Jarod_Wilson/preview.jpg | Bin 7504 -> 0 bytes
.../templates/remotes/adaptec/lircd.conf.AVC-2410 | 62 -
.../templates/remotes/animax/lircd.conf.animax | 199 ---
.../templates/remotes/animax/lircmd.conf.animax | 71 --
.../templates/remotes/animax/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/asus/lircd.conf.asus | 56 -
.../templates/remotes/asus/lircd.conf.digimatrix | 152 ---
.../templates/remotes/atiusb/lircd.conf.atiusb | 1259 -------------------
.../remotes/avermedia/lircd.conf.avermedia | 72 --
.../remotes/avermedia/lircd.conf.avermedia98 | 175 ---
.../templates/remotes/avermedia/lircd.conf.vdomate | 61 -
.../remotes/avermedia/lircmd.conf.avermedia | 33 -
.../remotes/avermedia/lircmd.conf.avermedia98 | 37 -
.../templates/remotes/avermedia/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/bestbuy/lircd.conf.bestbuy | 63 -
.../templates/remotes/bestbuy/lircd.conf.bestbuy2 | 59 -
.../templates/remotes/bestbuy/lircmd.conf.bestbuy | 33 -
.../templates/remotes/bestbuy/lircmd.conf.bestbuy2 | 34 -
.../templates/remotes/caraca/lircd.conf.caraca | 46 -
.../templates/remotes/caraca/lircrc.caraca | 134 --
.../templates/remotes/caraca/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/chronos/lircd.conf.chronos | 56 -
.../templates/remotes/cph03x/lircd.conf.cph03x | 72 --
.../templates/remotes/creative/lircd.conf.alsa_usb | 56 -
.../remotes/creative/lircd.conf.breakoutbox | 55 -
.../templates/remotes/creative/lircd.conf.creative | 59 -
.../templates/remotes/creative/lircd.conf.infracd | 61 -
.../remotes/creative/lircd.conf.livedrive | 115 --
.../templates/remotes/dvico/lircd.conf.fusionHDTV | 221 ----
.../templates/remotes/ea65/lircd.conf.ea65 | 73 --
.../templates/remotes/ea65/lircrc.ea65 | 381 ------
.../templates/remotes/ea65/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/ericsson/lircd.conf.bte | 53 -
.../templates/remotes/generic/DENON.conf | 31 -
.../templates/remotes/generic/MOTOROLA.conf | 53 -
.../templates/remotes/generic/NEC-pulse.conf | 32 -
.../templates/remotes/generic/NEC-short-pulse.conf | 34 -
.../templates/remotes/generic/NEC.conf | 30 -
.../templates/remotes/generic/RC-5.conf | 30 -
.../templates/remotes/generic/RC-6.conf | 28 -
.../templates/remotes/generic/RCMM-32.conf | 23 -
.../templates/remotes/generic/RECS80.conf | 31 -
.../templates/remotes/generic/SANYO.conf | 34 -
.../templates/remotes/generic/SONY12.conf | 28 -
.../templates/remotes/generic/SONY20.conf | 29 -
.../templates/remotes/gr8zap/lircd.conf.streamzap | 69 --
.../live-installer/templates/remotes/gr8zap/lircrc | 472 -------
.../templates/remotes/gr8zap/preview.jpg | Bin 83195 -> 0 bytes
.../remotes/hauppauge/lircd.conf.hauppauge | 274 ----
.../remotes/hauppauge/lircmd.conf.hauppauge | 33 -
.../templates/remotes/hauppauge/preview.jpg | Bin 45763 -> 0 bytes
.../remotes/hercules/lircd.conf.smarttv_stereo | 63 -
.../templates/remotes/imon-pad/lircd.conf | 88 --
.../templates/remotes/imon-pad/lircrc | 240 ----
.../templates/remotes/imon-pad/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/imon/lircd.conf.imon | 79 --
.../templates/remotes/imon/lircd.conf.imon-pad | 84 --
.../templates/remotes/imon/lircd.conf.imon-rsc | 109 --
.../templates/remotes/iodata/lircd.conf.gvbctv5pci | 68 -
.../templates/remotes/km_ready_preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/knc_one/lircd.conf.knc_one | 62 -
.../templates/remotes/kworld/lircd.conf.kworld | 144 ---
.../templates/remotes/leadtek/lircd.conf.PVR2000 | 75 --
.../templates/remotes/leadtek/lircd.conf.RM-0007 | 86 --
.../templates/remotes/leadtek/lircd.conf.RM-0010 | 101 --
.../templates/remotes/leadtek/lircmd.conf.RM-0007 | 36 -
.../templates/remotes/leadtek/lircmd.conf.RM-0010 | 36 -
.../remotes/life-view/lircd.conf.flyvideo | 87 --
.../remotes/life-view/lircmd.conf.flyvideo | 33 -
.../templates/remotes/life-view/lircrc.flyvideo | 131 --
.../templates/remotes/life-view/preview.jpg | Bin 15108 -> 0 bytes
.../templates/remotes/logitech/lircd.conf.logitech | 111 --
.../remotes/logitech/lircmd.conf.logitech | 64 -
.../templates/remotes/mceusb/lircd-mceusb.conf | 88 --
.../templates/remotes/mceusb/lircd.conf.mceusb | 104 --
.../templates/remotes/mceusb/lircrc-mceusb | 393 ------
.../templates/remotes/mceusb/preview.jpg | Bin 12551 -> 0 bytes
.../templates/remotes/no_remote/preview.jpg | Bin 3087 -> 0 bytes
.../remotes/packard_bell/lircd.conf.packard_bell | 94 --
.../templates/remotes/pcmak/lircd.conf.pcmak | 116 --
.../templates/remotes/pcmak/lircmd.conf.pcmak | 29 -
.../templates/remotes/pcmak/lircrc.pcmak | 1310 --------------------
.../templates/remotes/pcmak/preview.jpg | Bin 15108 -> 0 bytes
.../remotes/pinnacle_systems/lircd.conf.pctv | 94 --
.../templates/remotes/pixelview/lircd.conf.playtv | 34 -
.../remotes/pixelview/lircd.conf.playtv_bt878 | 54 -
.../remotes/pixelview/lircd.conf.playtv_pro | 159 ---
.../remotes/pixelview/lircd.conf.remotemaster | 117 --
.../remotes/pixelview/lircmd.conf.playtv_pro | 29 -
.../remotes/pixelview/lircmd.conf.remotemaster | 31 -
.../templates/remotes/pixelview/lircrc.playtv_pro | 134 --
.../templates/remotes/provideo/lircd.conf.pv951 | 67 -
.../templates/remotes/receiver_usb.id | 33 -
.../templates/remotes/remotec/lircd.conf.BW6130 | 88 --
.../templates/remotes/remotec/lircmd.conf.BW6130 | 291 -----
.../templates/remotes/sasem/lircd.conf.sasem | 81 --
.../remotes/sigma_designs/lircd.conf.realmagic | 83 --
.../templates/remotes/silitek/lircd.conf.silitek | 97 --
.../templates/remotes/silitek/lircmd.conf.silitek | 72 --
.../remotes/snapstream_firefly/lircd.snapstrm.conf | 127 --
.../remotes/snapstream_firefly/lircrc-snapstrm.txt | 590 ---------
.../remotes/snapstream_firefly/preview.jpg | Bin 63750 -> 0 bytes
.../remotes/streamzap/lircd.conf.streamzap | 69 --
.../templates/remotes/streamzap/lircrc | 832 -------------
.../templates/remotes/streamzap/preview.jpg | Bin 83195 -> 0 bytes
.../remotes/technisat/lircd.conf.mediafocusI | 42 -
.../templates/remotes/tekram/lircd.conf.m230 | 48 -
.../templates/remotes/tekram/lircmd.conf.m230 | 33 -
.../templates/remotes/unknown/preview.jpg | Bin 1587 -> 0 bytes
.../templates/remotes/x10/lircd.conf.mouseremote | 116 --
.../templates/remotes/x10/lircd.conf.mp3anywhere | 64 -
.../templates/remotes/x10/lircmd.conf.mouseremote | 288 -----
.../live-installer/templates/samba/smb.conf.home | 10 -
.../live-installer/templates/samba/smb.conf.media | 10 -
.../templates/samba/smb.conf.template | 125 --
.../templates/settings/default_1/keybindings.txt | 209 ----
.../templates/settings/default_1/settings.txt | 320 -----
.../templates/settings/default_2/keybindings.txt | 209 ----
.../templates/settings/default_2/settings.txt | 320 -----
.../live-installer/templates/sources/mv-core | 2 -
.../templates/sources/mv-core-testing | 2 -
.../live-installer/templates/sources/mv-extra | 2 -
.../templates/sources/mv-extra-testing | 2 -
.../live-installer/templates/sources/svc_pkg | 3 -
.../transmit/Time_Warner_SA3250/lircd.conf | 413 ------
.../live-installer/templates/xine.config.template | 754 -----------
.../live-installer/templates/xorg/modeline.ATSC | 33 -
.../live-installer/templates/xorg/modeline.DVD | 9 -
.../live-installer/templates/xorg/modeline.NTSC | 10 -
.../live-installer/templates/xorg/modeline.VESA | 163 ---
.../live-installer/templates/xorg/modeline.custom | 1 -
.../live-installer/templates/xorg/xorg.conf.ati | 94 --
.../live-installer/templates/xorg/xorg.conf.intel | 148 ---
.../live-installer/templates/xorg/xorg.conf.nvidia | 90 --
.../live-installer/templates/xorg/xorg.conf.via | 77 --
.../live-installer/templates/xorg/xorg.conf.vmware | 72 --
abs/core-testing/live-installer/timezip.py | 185 ---
abs/core-testing/live-installer/timezone.bin | Bin 805819 -> 0 bytes
abs/core-testing/live-installer/xconfig.sh | 233 ----
408 files changed, 28317 insertions(+), 28316 deletions(-)
create mode 100644 abs/core-testing/LinHES-config/LinHES-release
create mode 100644 abs/core-testing/LinHES-config/LinHES.install
create mode 100755 abs/core-testing/LinHES-config/MythVantage.sh
create mode 100755 abs/core-testing/LinHES-config/PKGBUILD
create mode 100755 abs/core-testing/LinHES-config/add_service.sh
create mode 100755 abs/core-testing/LinHES-config/autocard.py
create mode 100755 abs/core-testing/LinHES-config/bpopup-ui.xml
create mode 100755 abs/core-testing/LinHES-config/build_diskless.sh
create mode 100755 abs/core-testing/LinHES-config/checkout_MythVantage.sh
create mode 100755 abs/core-testing/LinHES-config/create_master.sh
create mode 100755 abs/core-testing/LinHES-config/file_time_offset.py
create mode 100755 abs/core-testing/LinHES-config/install-ui.xml
create mode 100755 abs/core-testing/LinHES-config/install_db_chroot.sh
create mode 100755 abs/core-testing/LinHES-config/install_functions.sh
create mode 100755 abs/core-testing/LinHES-config/install_proxy.sh
create mode 100644 abs/core-testing/LinHES-config/issue
create mode 100755 abs/core-testing/LinHES-config/live-install.sh
create mode 100644 abs/core-testing/LinHES-config/myth_user_call
create mode 100644 abs/core-testing/LinHES-config/networkconfig.sh
create mode 100755 abs/core-testing/LinHES-config/remove_service.sh
create mode 100755 abs/core-testing/LinHES-config/restore_default_settings.sh
create mode 100644 abs/core-testing/LinHES-config/restore_km_db_chroot.sh
create mode 100755 abs/core-testing/LinHES-config/soundconfig.sh
create mode 100755 abs/core-testing/LinHES-config/startx
create mode 100755 abs/core-testing/LinHES-config/systemconfig.sh
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules
create mode 100644 abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf
create mode 100755 abs/core-testing/LinHES-config/templates/cc.orig.sh
create mode 100755 abs/core-testing/LinHES-config/templates/cc.sh
create mode 100755 abs/core-testing/LinHES-config/templates/cc_vol.sh
create mode 100755 abs/core-testing/LinHES-config/templates/change_chan.sh
create mode 100644 abs/core-testing/LinHES-config/templates/cron.template
create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address
create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route
create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig
create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/options
create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4
create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8
create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full
create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac
create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid
create mode 100644 abs/core-testing/LinHES-config/templates/exports.template
create mode 100755 abs/core-testing/LinHES-config/templates/fstab.conf.template
create mode 100644 abs/core-testing/LinHES-config/templates/mysql.service
create mode 100755 abs/core-testing/LinHES-config/templates/mysql.txt
create mode 100755 abs/core-testing/LinHES-config/templates/ncid.conf.template
create mode 100644 abs/core-testing/LinHES-config/templates/ncidd.conf.template
create mode 100755 abs/core-testing/LinHES-config/templates/real_change_chan.sh
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf
create mode 100755 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap
create mode 100755 abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere
create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote
create mode 100755 abs/core-testing/LinHES-config/templates/samba/smb.conf.home
create mode 100755 abs/core-testing/LinHES-config/templates/samba/smb.conf.media
create mode 100644 abs/core-testing/LinHES-config/templates/samba/smb.conf.template
create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt
create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt
create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt
create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt
create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-core
create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-core-testing
create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-extra
create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-extra-testing
create mode 100644 abs/core-testing/LinHES-config/templates/sources/svc_pkg
create mode 100755 abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf
create mode 100644 abs/core-testing/LinHES-config/templates/xine.config.template
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.DVD
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.VESA
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.custom
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel
create mode 100755 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia
create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via
create mode 100755 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware
create mode 100755 abs/core-testing/LinHES-config/timezip.py
create mode 100755 abs/core-testing/LinHES-config/timezone.bin
create mode 100755 abs/core-testing/LinHES-config/xconfig.sh
delete mode 100644 abs/core-testing/live-installer/LinHES-release
delete mode 100755 abs/core-testing/live-installer/MythVantage.sh
delete mode 100755 abs/core-testing/live-installer/PKGBUILD
delete mode 100755 abs/core-testing/live-installer/add_service.sh
delete mode 100755 abs/core-testing/live-installer/autocard.py
delete mode 100755 abs/core-testing/live-installer/bpopup-ui.xml
delete mode 100755 abs/core-testing/live-installer/build_diskless.sh
delete mode 100755 abs/core-testing/live-installer/checkout_MythVantage.sh
delete mode 100755 abs/core-testing/live-installer/create_master.sh
delete mode 100755 abs/core-testing/live-installer/file_time_offset.py
delete mode 100755 abs/core-testing/live-installer/install-ui.xml
delete mode 100755 abs/core-testing/live-installer/install_db_chroot.sh
delete mode 100755 abs/core-testing/live-installer/install_functions.sh
delete mode 100755 abs/core-testing/live-installer/install_proxy.sh
delete mode 100644 abs/core-testing/live-installer/issue
delete mode 100755 abs/core-testing/live-installer/live-install.sh
delete mode 100644 abs/core-testing/live-installer/live.install
delete mode 100644 abs/core-testing/live-installer/myth_user_call
delete mode 100644 abs/core-testing/live-installer/networkconfig.sh
delete mode 100755 abs/core-testing/live-installer/remove_service.sh
delete mode 100755 abs/core-testing/live-installer/restore_default_settings.sh
delete mode 100644 abs/core-testing/live-installer/restore_km_db_chroot.sh
delete mode 100755 abs/core-testing/live-installer/soundconfig.sh
delete mode 100755 abs/core-testing/live-installer/startx
delete mode 100755 abs/core-testing/live-installer/systemconfig.sh
delete mode 100644 abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
delete mode 100644 abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf
delete mode 100644 abs/core-testing/live-installer/templates/LCD/Silverstone/modules
delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf
delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf
delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/modules
delete mode 100644 abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf
delete mode 100755 abs/core-testing/live-installer/templates/cc.orig.sh
delete mode 100755 abs/core-testing/live-installer/templates/cc.sh
delete mode 100755 abs/core-testing/live-installer/templates/cc_vol.sh
delete mode 100755 abs/core-testing/live-installer/templates/change_chan.sh
delete mode 100644 abs/core-testing/live-installer/templates/cron.template
delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/ipv4address
delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/ipv4route
delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/iwconfig
delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/options
delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-4
delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-8
delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-Full
delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac
delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid
delete mode 100644 abs/core-testing/live-installer/templates/exports.template
delete mode 100755 abs/core-testing/live-installer/templates/fstab.conf.template
delete mode 100644 abs/core-testing/live-installer/templates/mysql.service
delete mode 100755 abs/core-testing/live-installer/templates/mysql.txt
delete mode 100755 abs/core-testing/live-installer/templates/ncid.conf.template
delete mode 100644 abs/core-testing/live-installer/templates/ncidd.conf.template
delete mode 100755 abs/core-testing/live-installer/templates/real_change_chan.sh
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf
delete mode 100755 abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410
delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax
delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax
delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus
delete mode 100644 abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix
delete mode 100644 abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98
delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy
delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2
delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy
delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2
delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca
delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca
delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos
delete mode 100644 abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x
delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb
delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox
delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative
delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd
delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive
delete mode 100644 abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/DENON.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad
delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci
delete mode 100644 abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one
delete mode 100644 abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld
delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000
delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007
delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010
delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007
delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010
delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo
delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo
delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo
delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech
delete mode 100644 abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech
delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb
delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb
delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster
delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro
delete mode 100644 abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951
delete mode 100644 abs/core-testing/live-installer/templates/remotes/receiver_usb.id
delete mode 100644 abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130
delete mode 100644 abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130
delete mode 100644 abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem
delete mode 100644 abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic
delete mode 100644 abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek
delete mode 100644 abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek
delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
delete mode 100755 abs/core-testing/live-installer/templates/remotes/streamzap/lircrc
delete mode 100644 abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI
delete mode 100644 abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230
delete mode 100644 abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230
delete mode 100644 abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg
delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote
delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere
delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote
delete mode 100755 abs/core-testing/live-installer/templates/samba/smb.conf.home
delete mode 100755 abs/core-testing/live-installer/templates/samba/smb.conf.media
delete mode 100644 abs/core-testing/live-installer/templates/samba/smb.conf.template
delete mode 100644 abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt
delete mode 100644 abs/core-testing/live-installer/templates/settings/default_1/settings.txt
delete mode 100644 abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt
delete mode 100644 abs/core-testing/live-installer/templates/settings/default_2/settings.txt
delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-core
delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-core-testing
delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-extra
delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-extra-testing
delete mode 100644 abs/core-testing/live-installer/templates/sources/svc_pkg
delete mode 100755 abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
delete mode 100644 abs/core-testing/live-installer/templates/xine.config.template
delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.ATSC
delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.DVD
delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.NTSC
delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.VESA
delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.custom
delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.ati
delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.intel
delete mode 100755 abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia
delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.via
delete mode 100755 abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware
delete mode 100755 abs/core-testing/live-installer/timezip.py
delete mode 100755 abs/core-testing/live-installer/timezone.bin
delete mode 100755 abs/core-testing/live-installer/xconfig.sh
diff --git a/abs/core-testing/LinHES-config/LinHES-release b/abs/core-testing/LinHES-config/LinHES-release
new file mode 100644
index 0000000..a4de764
--- /dev/null
+++ b/abs/core-testing/LinHES-config/LinHES-release
@@ -0,0 +1 @@
+LinHES R6.00.02
diff --git a/abs/core-testing/LinHES-config/LinHES.install b/abs/core-testing/LinHES-config/LinHES.install
new file mode 100644
index 0000000..a0a9d31
--- /dev/null
+++ b/abs/core-testing/LinHES-config/LinHES.install
@@ -0,0 +1,78 @@
+# This is a default template for a post-install scriptlet. You can
+# remove any functions you don't need (and this header).
+
+# arg 1: the new package version
+pre_install() {
+ rm -f /etc/issue
+ rm -f /etc/arch-release
+
+}
+
+# arg 1: the new package version
+post_install() {
+ if [ ! -f /etc/blacklist.package ]
+ then
+ echo "List of packages to ignore" > /etc/blacklist.package
+ echo "one package per line" >> /etc/blacklist.package
+ fi
+
+LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage"
+LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage"
+for i in "$LINE" "$LINE1"
+do
+ cp /etc/sudoers /etc/sudoers.bak
+ grep -q "$i" /etc/sudoers
+ if [ $? != 0 ]
+ then
+ echo "$i" >> /etc/sudoers
+ visudo -cf /etc/sudoers
+ if [ ! $? = 0 ]
+ then
+ cp /etc/sudoers.bak /etc/sudoers
+ echo $i
+ echo "Error adding files"
+ exit 1
+ fi
+ fi
+done
+
+
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+pre_upgrade() {
+ /bin/true
+}
+
+# arg 1: the new package version
+# arg 2: the old package version
+post_upgrade() {
+ . /etc/profile
+ ps -ef|grep mysqld|grep -v grep
+ status=$?
+ echo "status $status"
+ if [ $status = 0 ]
+ then
+ restore_default_settings.sh -c load
+ fi
+ if [ ! -f /etc/blacklist.package ]
+ then
+ echo "List of packages to ignore" > /etc/blacklist.package
+ echo "one package per line" >> /etc/blacklist.package
+ fi
+}
+
+# arg 1: the old package version
+pre_remove() {
+ /bin/true
+}
+
+# arg 1: the old package version
+post_remove() {
+ /bin/true
+}
+
+op=$1
+shift
+$op $*
diff --git a/abs/core-testing/LinHES-config/MythVantage.sh b/abs/core-testing/LinHES-config/MythVantage.sh
new file mode 100755
index 0000000..286c908
--- /dev/null
+++ b/abs/core-testing/LinHES-config/MythVantage.sh
@@ -0,0 +1,3 @@
+export MV_ROOT=/usr/MythVantage
+export PATH=$PATH:$MV_ROOT/bin
+export TEMPLATES=$MV_ROOT/templates
diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD
new file mode 100755
index 0000000..5fa4e66
--- /dev/null
+++ b/abs/core-testing/LinHES-config/PKGBUILD
@@ -0,0 +1,63 @@
+pkgname=LinHES-config
+pkgver=1.0
+pkgrel=1
+conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev )
+pkgdesc="Install and configure your system"
+depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan)
+arch=('i686')
+
+source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh)
+
+install=LinHES.install
+build() {
+ mkdir -p $startdir/pkg/etc
+ mkdir -p $startdir/pkg/usr/share/mythtv/themes/default
+
+ MVDIR=$startdir/pkg/usr/MythVantage
+ mkdir $startdir/pkg/etc/profile.d
+ install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh
+ mkdir -p $MVDIR/bin
+ mkdir -p $MVDIR/templates
+ mkdir -p $MVDIR/etc
+
+#copy in all the installer specific stuff
+ rsync -r --exclude=.svn ../templates $MVDIR/
+ install -m0700 myth_user_call $MVDIR/bin/myth_user_call
+ install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh
+ install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh
+ install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh
+ install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh
+# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh
+ install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh
+ install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh
+ install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh
+ install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh
+ install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh
+ install -m 0755 create_master.sh $MVDIR/bin/create_master.sh
+ install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh
+ install -m 0755 timezone.bin $MVDIR/bin/timezone.bin
+ install -m 0755 timezip.py $MVDIR/bin/timezip.py
+ install -m 0755 autocard.py $MVDIR/bin/autocard.py
+
+ mkdir -p $startdir/pkg/usr/bin
+ install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py
+ #copy in the branding stuff
+ install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release
+ install -m 0755 issue $startdir/pkg/etc/issue
+
+# copy over the ui files
+ install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/
+
+#copy in the binaries
+ #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage
+ install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage
+ cd $MVDIR/bin
+ ln -s MythVantage mythvantage
+ ln -s MythVantage mythinstall
+ cd -
+# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect
+
+# install -m 0755 startx $startdir/pkg/root/startx
+# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh
+}
+
diff --git a/abs/core-testing/LinHES-config/add_service.sh b/abs/core-testing/LinHES-config/add_service.sh
new file mode 100755
index 0000000..190d604
--- /dev/null
+++ b/abs/core-testing/LinHES-config/add_service.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+SERVICE_DIR=/var/service
+SCRIPT_DIR=/etc/sv
+if [ -d $SCRIPT_DIR/$1 ]
+then
+ if [ -d $SERVICE_DIR/$1 ]
+ then
+ echo "$1 already there"
+ else
+ ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1
+ echo "adding $1"
+ fi
+else
+ echo "couldn't find $SCRIPT_DIR/$1"
+fi
diff --git a/abs/core-testing/LinHES-config/autocard.py b/abs/core-testing/LinHES-config/autocard.py
new file mode 100755
index 0000000..b59b8d6
--- /dev/null
+++ b/abs/core-testing/LinHES-config/autocard.py
@@ -0,0 +1,302 @@
+#!/usr/bin/python
+# import MySQL module
+#jm
+import MySQLdb
+import sys
+import getopt
+import socket
+import os
+import time
+import string
+import glob
+from string import letters
+from string import digits
+
+def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor):
+ global currenthostname
+ print Device
+ print Driver,
+ print Cardvendor
+ cursor = db.cursor()
+ insert = "false"
+ if Driver == "ivtv" :
+ cardtype="MPEG"
+ defaultinput="Tuner 1"
+ insert="true"
+ if Cardvendor == "pcHDTV HD3000 HDTV":
+ insert="false"
+ cardtype ="whocares"
+
+ #print insert
+ if insert == "true" :
+ cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname))
+
+def INSERTHDR_INTOMYTH(deviceid,tuner_number):
+ cardtype='HDHOMERUN'
+ defaultinput='MPEG2TS'
+ global currenthostname
+ print deviceid
+ print cardtype
+ print defaultinput
+ print tuner_number
+ cursor = db.cursor()
+ #print insert
+ cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname))
+
+def INSERTAUTOCARD():
+ global cardlist
+ global currenthostname
+ # create a cursor
+ cursor = db.cursor()
+
+
+ for i in range( 1 , len(cardlist)):
+ insert = "false"
+# print cardlist[i]
+ Device=cardlist[i][0]
+ Driver=cardlist[i][1]
+ Cardvendor=cardlist[i][2]
+ Businfo=cardlist[i][3]
+ if Driver == "ivtv" :
+ insert="true"
+ devicestatus="unused"
+ if Cardvendor == "pcHDTV HD3000 HDTV":
+ insert="false"
+ cardtype ="whocares"
+ if Driver == "hdr":
+ insert="true"
+ devicestatus="unused"
+
+ if insert == "true" :
+ cursor.execute("delete from autocard where uniqid=%s;",(Businfo))
+ if Driver=="hdr":
+ Cardvendor="HDHOMERUN Tuner 1"
+ cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
+ Cardvendor="HDHOMERUN Tuner 2"
+ cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
+
+ else:
+ cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
+
+
+
+def PRINTINFO():
+ global cardlist
+
+ for list in cardlist:
+ if list != "_placeholder_":
+ print list
+ #print "-------------"
+
+def GATHER_HDR():
+ global cardlist
+ command="/usr/bin/hdhomerun_config --discover"
+ results=os.popen(command,'r')
+ line=results.readline()
+ if line.strip().split()[0] == "no":
+ print "HDHOMERUN not detected"
+ else:
+ print line
+ hdrdevice=line.strip().split()[2]
+ print hdrdevice
+ Driver="hdr"
+ Device=hdrdevice
+ Cardtype="HDHOMERUN"
+ Businfo=hdrdevice
+ cardprops = [Device,Driver , Cardtype , Businfo]
+ cardlist.append(cardprops)
+
+
+def GATHER_v4l_CARDS():
+ global cardlist
+ cardlist=["_placeholder_"]
+ # print "Looking for v4l cards"
+ try:
+ filelist = os.listdir('/dev/v4l/')
+ except OSError:
+ filelist=" "
+ #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0']
+ #cardlist.append(fakelist)
+ try:
+ filelist = glob.glob("/dev/v4l/video?")
+ Driver=""
+ Cardtype=""
+ Businfo=""
+ numcards = 0
+ for Device in filelist:
+ #print card
+ numcards = numcards+1
+ cmd = 'v4l2-ctl -D -d' + Device
+ for line in os.popen(cmd).readlines():
+ #print line
+ pos = string.find(line,"Driver name")
+ if pos >=0:
+ splitline= line.split(':')
+ Driver=splitline[1].strip()
+ pos = string.find(line,"Card type")
+ if pos >=0:
+ splitline= line.split(':')
+ Cardtype=splitline[1].strip()
+
+ pos = string.find(line,"Bus info")
+ if pos >=0:
+ splitline= line.split(':',1)
+ Businfo=splitline[1].strip()
+
+ #print Device,Driver , Cardtype , Businfo,numcards
+ cardprops = [Device,Driver , Cardtype , Businfo]
+ cardlist.append(cardprops)
+ except IOError:
+ print "no v4l cards found"
+ sys.exit(2)
+
+
+def WRITEUDEV_IVTV():
+ global insertmyth
+ cursor = db.cursor()
+ #add ivtv,cid lookup loop through until empty.
+ cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'")
+ cidrows = cursor.fetchall()
+ for row in cidrows:
+ cid=row[0]
+ cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid))
+ result = cursor.fetchone()
+ description=result[2]
+ driver='DRIVERS==\"ivtv\"'
+ ATTRNAME='ATTR{name}=="ivtv? encoder MPG"'
+ KERNELS='KERNELS==\"'
+ KERNELS+=cid
+ KERNELS+="\""
+ #filter out non digit or chars
+ keep=letters.join(digits)
+ description=filter(lambda c: c in keep, description)
+ devnode="ivtv/"
+ #devnode+=description + "_"
+ udevcid=cid.partition(":")
+ devnode+=udevcid[2]
+ devnode+="_video"
+ UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"'
+ print "Here is the udev rule"
+ print UDEV_RULE
+ filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules'
+ file = open(filename,'w')
+ file.write(UDEV_RULE)
+ if ( insertmyth == "true"):
+ devnode="/dev/"+devnode
+ INSERTCARD_INTOMYTH(devnode,"ivtv",description)
+ cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid))
+#now insert HDR
+ cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'")
+ cidrows = cursor.fetchall()
+ for row in cidrows:
+ if ( insertmyth == "true"):
+ deviceid=row[0]
+ #cardtype="HDHOMRUN"
+ #defaultinput="MPEG2TS"
+ dbox2_port=row[1]
+ tuner_number=dbox2_port.rpartition(' ')[2]
+ INSERTHDR_INTOMYTH(deviceid,tuner_number)
+ cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port))
+
+
+
+def CLEARAUTOCARD():
+ cursor = db.cursor()
+ cursor.execute("delete from autocard")
+
+def RELOADUDEV():
+ print "relaoding udev rules"
+ os.system('udevcontrol reload_rules')
+ os.system('rmmod ivtv')
+ os.system('udevtrigger')
+
+
+def usage():
+ print " -h help"
+ print " -g gather and print out the found cards"
+ print " -w write out the udev rules"
+ print " -i insert cards into myth that are marked will-add(only used with -w)"
+ print " -r reload udev rules"
+ print " -c clear the autocard db"
+
+def main(argv):
+ global db
+ global cardlist
+ global currenthostname
+ currenthostname=""
+ writeudev="false"
+ global insertmyth
+ insertmyth ="false"
+
+ db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg")
+ try:
+ cursor = db.cursor()
+ cursor.execute("describe autocard;")
+ except MySQLdb.Error, e:
+ cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));")
+ print "table created"
+
+ if ( currenthostname == "" ):
+ currenthostname = socket.gethostname()
+
+
+ try:
+ opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] )
+ except getopt.GetoptError:
+ sys.exit(2)
+ for opt, arg in opts:
+ if opt in ("-h", "--help"):
+ usage()
+ sys.exit()
+ elif opt in ( "-g" , "--gathercards"):
+ GATHER_v4l_CARDS()
+ GATHER_HDR()
+ INSERTAUTOCARD()
+ PRINTINFO()
+ elif opt in ("-w", "--writeudev"):
+ writeudev="true"
+ elif opt in ("-i", "--insert"):
+ insertmyth="true"
+ elif opt in ( "-r" , "--reloadudev"):
+ RELOADUDEV()
+ elif opt in ( "-c" , "--clearautocard"):
+ CLEARAUTOCARD()
+
+
+ if ( writeudev == "true"):
+ WRITEUDEV_IVTV()
+
+
+
+
+
+
+if __name__ == "__main__":
+ main(sys.argv[1:])
+
+
+
+
+
+#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));
+#Query OK, 0 rows affected (0.14 sec)
+
+#mysql> describe autocard;
+#+--------------+-------------+------+-----+---------+-------+
+#| Field | Type | Null | Key | Default | Extra |
+#+--------------+-------------+------+-----+---------+-------+
+#| dev | varchar(50) | YES | | NULL | |
+#| driver | varchar(50) | YES | | NULL | |
+#| description | varchar(50) | YES | | NULL | |
+#| uniqid | varchar(50) | YES | | NULL | |
+#| devicestatus | varchar(50) | YES | | NULL | |
+#| hostname | varchar(50) | YES | | NULL | |
+#+--------------+-------------+------+-----+---------+-------+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/bpopup-ui.xml b/abs/core-testing/LinHES-config/bpopup-ui.xml
new file mode 100755
index 0000000..df0598b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/bpopup-ui.xml
@@ -0,0 +1,164 @@
+<!--
+
+ This is a myth style theme file for mythwelcome
+
+ (c) 2005 by a whole bunch of people associated with MythTV
+
+-->
+<mythuitheme>
+
+ <window name="welcome_screen">
+
+ <!--
+
+ First, define all the fonts we need on this screen
+
+ -->
+ <font name="title" face="Arial">
+ <color>#ffff00</color>
+ <dropcolor>#000000</dropcolor>
+ <size>24</size>
+ <shadow>3,3</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="time" face="Arial">
+ <color>#9999cc</color>
+ <size>18</size>
+ <bold>yes</bold>
+ </font>
+
+ <font name="label" face="Arial">
+ <color>#ffff00</color>
+ <dropcolor>#000000</dropcolor>
+ <size>18</size>
+ <shadow>3,3</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="info" face="Arial">
+ <color>#ffffff</color>
+ <size>18</size>
+ <bold>yes</bold>
+ </font>
+
+ <font name="biginfo" face="Arial">
+ <color>#ffffff</color>
+ <size>50</size>
+ <bold>yes</bold>
+ </font>
+ <font name="warning" face="Arial">
+ <color>#ff0000</color>
+ <dropcolor>#000000</dropcolor>
+ <size>16</size>
+ <shadow>2,2</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="buttons" face="Arial">
+ <color>#ffff00</color>
+ <size>14</size>
+ <bold>yes</bold>
+ </font>
+
+ <container name="main_display">
+ <area>0,0,800,600</area>
+
+ <textarea name="title" draworder="0" align="center">
+ <multiline>no</multiline>
+ <font>title</font>
+ <area>50,40,700,40</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ time
+ -->
+ <textarea name="time_text" draworder="0" align="right">
+ <multiline>no</multiline>
+ <font>time</font>
+ <area>660,520,110,30</area>
+ <value></value>
+ </textarea>
+
+ <textarea name="date_text" draworder="0" align="center">
+ <multiline>no</multiline>
+ <font>time</font>
+ <area>0,60,800,70</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ current myth status
+ -->
+
+ <textarea name="status_text" draworder="1" align="center">
+ <multiline>yes</multiline>
+ <font>info</font>
+ <area>20,70,760,60</area>
+ <value>MythTV is idle and will shutdown shortly.</value>
+ </textarea>
+
+ <!--
+ current recordings status
+ -->
+
+ <textarea name="recording_label" draworder="1" align="center">
+ <font>label</font>
+ <area>20,110,760,30</area>
+ <!--<value>Percent Complete </value>-->
+ <value></value>
+ </textarea>
+
+ <textarea name="recording_text" draworder="1" align="hcenter">
+ <multiline>yes</multiline>
+ <font>biginfo</font>
+ <area>20,110,760,150</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ next scheduled recording status
+ -->
+
+ <textarea name="scheduled_label" draworder="1" align="center">
+ <font>label</font>
+ <area>20,320,760,30</area>
+ <value></value>
+ </textarea>
+
+ <textarea name="scheduled_text" draworder="1" align="hcenter">
+ <multiline>yes</multiline>
+ <font>biginfo</font>
+ <area>20,400,760,120</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ scheduled recordings conflict warning
+ -->
+
+ <textarea name="conflicts_text" draworder="1" align="center">
+ <font>warning</font>
+ <area>20,490,760,30</area>
+ <value>WARNING: There are conflicting scheduled recordings!</value>
+ </textarea>
+
+ <!--
+ start frontend button
+
+ <textbutton name="startfrontend_button" draworder="1">
+ <position>81,535</position>
+ <font>buttons</font>
+ <image function="on" filename="mw_text_button_on.png"></image>
+ <image function="off" filename="mw_text_button_off.png"></image>
+ <image function="pushed" filename="mw_text_button_pushed.png"></image>
+ </textbutton>
+
+ -->
+
+ </container>
+
+ </window>
+
+</mythuitheme>
diff --git a/abs/core-testing/LinHES-config/build_diskless.sh b/abs/core-testing/LinHES-config/build_diskless.sh
new file mode 100755
index 0000000..4dfd5fc
--- /dev/null
+++ b/abs/core-testing/LinHES-config/build_diskless.sh
@@ -0,0 +1,143 @@
+#!/bin/bash
+#CD=/mnt/cd
+. /etc/profile
+. /etc/systemconfig
+
+TFTP=/data/srv/tftp
+CD=/data/srv/tftp/live
+DESTCD=/data/srv/tftp/CD
+BASE=/data/srv/tftp/masterbuild
+
+MODULES=$DESTCD/MythVantage/base/
+myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
+SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/
+
+function log () {
+echo $1
+}
+
+function check_xvfb () {
+export DISPLAY=127.0.0.1:25
+ Xvfb -ac :25 &
+
+}
+
+
+function create_base_image() {
+echo $SRCFILES
+if [ -f $SRCFILES/data.lzm ]
+then
+ mkdir $HOST_IMG_DIR
+ cd $SRCFILES
+ echo "Creating image.." > $BASE/tmp/.install_state
+ LIST=`ls *.lzm`
+ for i in $LIST
+ do
+ echo $i
+ echo $i > $BASE/tmp/.install_percent
+ lzm2dir $i \/$HOST_IMG_DIR
+ done
+
+ for i in sys proc dev tmp
+ do
+ mkdir /$HOST_IMG_DIR/$i
+ done
+
+ chmod 777 /$HOST_IMG_DIR/tmp
+ mknod /$HOST_IMG_DIR/dev/null c 1 3
+ mknod /$HOST_IMG_DIR/dev/null c 1 5
+ mknod /$HOST_IMG_DIR/dev/console c 5 1
+ chmod +s /$HOST_IMG_DIR/usr/bin/Xorg
+ chmod +s /$HOST_IMG_DIR/usr/bin/crontab
+ chmod +s /$HOST_IMG_DIR/usr/bin/sudo
+ chmod +s /$HOST_IMG_DIR/bin/mount
+ #copy fstab from masterbuild
+ cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab
+ echo "Done: installing data" > $BASE/tmp/.install_state
+ return 0
+else
+ echo "Error: no modules" > $BASE/tmp/.install_state
+ log "couldn't find modules to install"
+ return 1
+fi
+}
+
+function configure_image () {
+ echo "Configuring system" > $BASE/tmp/.install_state
+ cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig
+ chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
+ chmod 775 "$HOST_IMG_DIR" /etc/systemconfig
+ cp /etc/mtab $HOST_IMG_DIR/etc/mtab
+ mount --bind /dev $HOST_IMG_DIR/dev
+
+ chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
+#copy syssettings template to here.
+ SE=$BASE$TEMPLATES/settings/syssettings
+ mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
+ cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings
+ chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
+ chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
+ chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
+#update remotedb with this host settings
+ OLDDISPLAY=$DISPLAY
+ check_xvfb
+ chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1
+ chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ if [ ! $? = 0 ]
+ then
+ touch $mountpoint/tmp/.dbsysfailed
+ chmod 777 $mountpoint/tmp/.dbsysfailed
+ else
+ #Run second time
+ chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
+ chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ fi
+chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
+cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf
+echo "Done" > $BASE/tmp/.install_state
+DISPLAY=$OLDDISPLAY
+
+#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/
+}
+
+function create_tftp_boot () {
+
+ CFGFILE=$TFTP/pxelinux.cfg/01-$2
+ echo "DEFAULT mythfe" > $CFGFILE
+ echo "LABEL mythfe" >> $CFGFILE
+ echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE
+ echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE
+ echo "TIMEOUT 2" >> $CFGFILE
+}
+
+function create_nfs_export () {
+echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports
+exportfs -arv
+}
+
+#-------------------------------------------------------------------------------MAIN PROGRAM ---------------------------------------------------------------------
+if [ x$1 = x -o x$2 = x ]
+then
+ echo "usage: hostname macaddress"
+ exit 1
+fi
+
+image_name=$1
+mac_address=`echo $2| tr "[:upper:]" "[:lower:]"`
+
+echo "using image_name of $image_name"
+echo "using mac_address of $mac_address"
+
+HOST_IMG_DIR=$TFTP/$1
+
+create_base_image $image_name
+configure_image
+umount $HOST_IMG_DIR/dev
+create_tftp_boot $image_name $mac_address
+create_nfs_export $image_name
+
+
+
+
+#create_dhcp_entry $mac_address
+
diff --git a/abs/core-testing/LinHES-config/checkout_MythVantage.sh b/abs/core-testing/LinHES-config/checkout_MythVantage.sh
new file mode 100755
index 0000000..764e418
--- /dev/null
+++ b/abs/core-testing/LinHES-config/checkout_MythVantage.sh
@@ -0,0 +1,47 @@
+#!/bin/bash
+MYDIR=`pwd`
+MYTHPATH="\/data\/LinHES-PKGBUILD\/abs\/core-testing\/mythtv\/stable\/mythtv\/src\/mythtv-0.21"
+
+function setup_links {
+rm mythinstall.bin
+rm mythbeselect.bin
+ln -s $MYDIR/src/MythVantage-app/mythinstall/mythinstall ./mythinstall.bin
+ln -s $MYDIR/src/MythVantage-app/mythbeselect/mythbeselect ./mythbeselect.bin
+}
+
+function dl_repo {
+mkdir src
+cd src
+if [ ! -d MythVantage-app ]
+then
+ git clone http://mythvantage.com/MythVantage-app.git/
+ cd MythVantage-app
+ git checkout --track -b LinHES origin/LinHES
+ cd $MYDIR
+ setup_links
+ cd -
+else
+ echo "updating exisiting tree"
+ cd MythVantage-app
+ git pull
+ git checkout master
+ git merge
+ cd -
+fi
+
+cd MythVantage-app
+git checkout master
+#git checkout origin/LinHES
+
+}
+
+dl_repo
+sed -i "s/^MYTHPATH.*$/MYTHPATH\=\"$MYTHPATH\"/g" $MYDIR/src/MythVantage-app/mythinstall/mythinstall.pro
+sed -i "s/#define __MVAPP__/\/\/#define __MVAPP__/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h
+sed -i "s/mythvantage/LinHES/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h
+
+cd $MYDIR/src/MythVantage-app/mythinstall && qmake
+make || exit 1
+cd $MYDIR/src/MythVantage-app/mythbeselect && qmake
+make ||exit 1
+
diff --git a/abs/core-testing/LinHES-config/create_master.sh b/abs/core-testing/LinHES-config/create_master.sh
new file mode 100755
index 0000000..1e641b4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/create_master.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+#CD=/mnt/cd
+CD=/data/srv/tftp/live
+DESTCD=/data/srv/tftp/CD
+DEST=/data/srv/tftp/masterbuild
+MODULES=$DESTCD/MythVantage/base/
+myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
+
+mkdir -p $DESTCD
+mkdir -p $DEST
+
+mount $CD
+status=0
+if [ -f $CD/MythVantage/base/data.lzm ]
+then
+ status=0
+else
+ status=1
+fi
+if [ x$status = x0 ]
+then
+ echo "copying to disk"
+ cp -rp $CD/* $DESTCD
+ cd $MODULES
+ for i in *.lzm
+ do
+ echo $i
+ lzm2dir $i \/$DEST
+ done
+ for i in sys proc dev tmp
+ do
+ mkdir $DEST/$i
+ done
+ chmod 777 /$DEST/tmp
+ mknod $DEST/dev/null c 1 3
+ mknod $DEST/dev/null c 1 5
+ mknod $DEST/dev/console c 5 1
+ chmod +s $DEST/usr/bin/Xorg
+ chmod +s $DEST/usr/bin/crontab
+ chmod +s $DEST/usr/bin/sudo
+ chmod +s $DEST/bin/mount
+fi
+if [ ! -f $DEST/etc/fstab.bak ]
+then
+ cp $DEST/etc/fstab $DEST/etc/fstab.bak
+fi
+tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab
+echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab
+echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports
+
+
+exportfs -arv
+
+#copy in the modules
+mkdir -p $DEST/mnt/live/mnt/
+mv $DESTCD/* $DEST/mnt/live/mnt/
+
diff --git a/abs/core-testing/LinHES-config/file_time_offset.py b/abs/core-testing/LinHES-config/file_time_offset.py
new file mode 100755
index 0000000..f2973d0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/file_time_offset.py
@@ -0,0 +1,39 @@
+#!/usr/bin/python
+
+
+import time
+import os
+import glob
+import getopt
+import sys
+def main(argv):
+ filecount=0
+# root = "/tmp"
+# offset = 4
+ now = int(time.time())
+
+
+ try:
+ opts, args = getopt.getopt(argv, "hs:d:")
+ except getopt.GetoptError:
+ sys.exit(2)
+ for opt, arg in opts:
+ if opt in ("-h", "--help"):
+ print "-s seconds -d /testdir"
+ print "default if 4 seconds"
+ sys.exit()
+ elif opt in ( "-s" ):
+ offset = int(arg)
+ elif opt in ("-d"):
+ root = arg
+
+ for item in glob.glob(root+"/*"):
+ lastmodDate = os.path.getmtime(item)
+ tdiff= now-lastmodDate
+ #print tdiff, offset
+
+ if tdiff > offset:
+ filecount+=1
+ print filecount
+if __name__ == "__main__":
+ main(sys.argv[1:])
diff --git a/abs/core-testing/LinHES-config/install-ui.xml b/abs/core-testing/LinHES-config/install-ui.xml
new file mode 100755
index 0000000..0ec9ddb
--- /dev/null
+++ b/abs/core-testing/LinHES-config/install-ui.xml
@@ -0,0 +1,175 @@
+<!--
+
+ This is a myth style theme file for mythwelcome
+
+ (c) 2005 by a whole bunch of people associated with MythTV
+
+-->
+<mythuitheme>
+
+ <window name="welcome_screen">
+
+ <!--
+
+ First, define all the fonts we need on this screen
+
+ -->
+ <font name="title" face="Arial">
+ <color>#ffff00</color>
+ <dropcolor>#000000</dropcolor>
+ <size>24</size>
+ <shadow>3,3</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="time" face="Arial">
+ <color>#9999cc</color>
+ <size>18</size>
+ <bold>yes</bold>
+ </font>
+
+ <font name="label" face="Arial">
+ <color>#ffff00</color>
+ <dropcolor>#000000</dropcolor>
+ <size>18</size>
+ <shadow>3,3</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="info" face="Arial">
+ <color>#ffffff</color>
+ <size>18</size>
+ <bold>yes</bold>
+ </font>
+
+ <font name="biginfo" face="Arial">
+ <color>#ffffff</color>
+ <size>50</size>
+ <bold>yes</bold>
+ </font>
+ <font name="warning" face="Arial">
+ <color>#ff0000</color>
+ <dropcolor>#000000</dropcolor>
+ <size>16</size>
+ <shadow>2,2</shadow>
+ <bold>yes</bold>
+ </font>
+
+ <font name="buttons" face="Arial">
+ <color>#ffff00</color>
+ <size>14</size>
+ <bold>yes</bold>
+ </font>
+ <font name="tinyinfo" face="Arial">
+ <color>#9999cc</color>
+ <size>12</size>
+ <bold>no</bold>
+ </font>
+
+ <container name="main_display">
+ <area>0,0,800,600</area>
+
+ <textarea name="title" draworder="0" align="center">
+ <multiline>no</multiline>
+ <font>title</font>
+ <area>50,40,700,40</area>
+ <value>LinHes: The Linux Home Entertainment System </value>
+ </textarea>
+
+ <!--
+ time
+ -->
+ <textarea name="time_text" draworder="0" align="right">
+ <multiline>no</multiline>
+ <font>time</font>
+ <area>660,520,110,30</area>
+ <value></value>
+ </textarea>
+
+ <textarea name="date_text" draworder="0" align="hcenter">
+ <multiline>yes</multiline>
+ <font>time</font>
+ <area>20,75,740,100</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ current myth status
+ -->
+
+ <textarea name="status_text" draworder="1" align="center">
+ <multiline>yes</multiline>
+ <font>info</font>
+ <area>20,100,760,60</area>
+ <value>MythTV is idle and will shutdown shortly.</value>
+ </textarea>
+
+ <!--
+ current recordings status
+ -->
+
+ <textarea name="recording_label" draworder="1" align="center">
+ <font>label</font>
+ <area>20,140,760,30</area>
+ <!--<value>Percent Complete </value>-->
+ <value></value>
+ </textarea>
+
+ <textarea name="recording_text" draworder="1" align="hcenter">
+ <multiline>yes</multiline>
+ <font>biginfo</font>
+ <area>20,140,760,150</area>
+ <value></value>
+ </textarea>
+
+ <!--
+ next scheduled recording status
+ -->
+
+ <textarea name="scheduled_label" draworder="1" align="center">
+ <font>label</font>
+ <area>20,320,760,30</area>
+ <value></value>
+ </textarea>
+
+ <textarea name="scheduled_text" draworder="1" align="hcenter">
+ <multiline>yes</multiline>
+ <font>biginfo</font>
+ <area>20,400,760,120</area>
+ <value></value>
+ </textarea>
+
+ <textarea name="mythvantage_text" draworder="1" align="right">
+ <multiline>no</multiline>
+ <font>tinyinfo</font>
+ <area>20,560,760,30</area>
+ <value></value>
+ </textarea>
+ <!--
+ scheduled recordings conflict warning
+ -->
+
+ <textarea name="conflicts_text" draworder="1" align="center">
+ <font>warning</font>
+ <area>20,490,760,30</area>
+ <value>WARNING: There are conflicting scheduled recordings!</value>
+ </textarea>
+
+ <!--
+ start frontend button
+
+ <textbutton name="startfrontend_button" draworder="1">
+ <position>81,535</position>
+ <font>buttons</font>
+ <image function="on" filename="mw_text_button_on.png"></image>
+ <image function="off" filename="mw_text_button_off.png"></image>
+ <image function="pushed" filename="mw_text_button_pushed.png"></image>
+ </textbutton>
+
+ -->
+
+ </container>
+
+ </window>
+
+</mythuitheme>
diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh
new file mode 100755
index 0000000..514dd3c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/install_db_chroot.sh
@@ -0,0 +1,52 @@
+#!/bin/bash
+. /etc/profile
+. /etc/systemconfig
+#myhost=`cat /etc/hostname`
+myhost=$hostname
+hostname $myhost
+mount -t proc none /proc
+pacman --noconfirm -Sf mysql
+/etc/rc.d/mysqld
+
+status=1
+mysqlstatus=1
+while [ ! $status = 0 ]
+do
+ /etc/rc.d/mysqld stop
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqlstatus=$?
+ if [ $mysqlstatus = 0 ]
+ then
+ mysql -e "show databases;"
+ showstatus=$?
+ if [ $showstatus = 0 ]
+ then
+ pacman --noconfirm -R mythdb-initial
+ pacman --noconfirm -S mythdb-initial
+ $MV_ROOT/bin/restore_default_settings.sh -c load
+ DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
+ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
+ if [ $SystemType = "Master_backend" ]
+ then
+ $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
+ fi
+ #update database to allow user jobs on this host.
+ $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
+ $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ #if [ -d /data/srv/mysql/mythconverg ]
+ if [ -d /var/lib/mysql/mythconverg ]
+ then
+ # pacman --noconfirm -R webcalendar
+ # pacman --noconfirm --nodeps -S webcalendar
+ status=0
+ fi
+ fi
+ fi
+done
+#/etc/rc.d/mysqld stop
+#umount /proc
+
+
+
diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh
new file mode 100755
index 0000000..e5912da
--- /dev/null
+++ b/abs/core-testing/LinHES-config/install_functions.sh
@@ -0,0 +1,449 @@
+#!/bin/bash
+. /etc/profile
+disk=$2
+mountpoint=new_boot
+
+#-------------------------------------------
+MYTHDBUSER=mythtv
+MYTHTVPASSWD=mythtv
+CMDLINE=$(cat /proc/cmdline)
+hostname=`hostname`
+MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec"
+BASE=""
+
+function update_db_settings () {
+
+ $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";"
+}
+
+function random_theme () {
+THEMES="basic-blue
+basic-green
+basic-red
+basic-purple
+basic-amber"
+
+theme=($THEMES) # Read into array variable.
+
+num_themes=${#theme[*]} # Count how many elements.
+
+pick=${theme[$((RANDOM%num_themes))]}
+echo "Selected $pick as the theme"
+update_db_settings Theme "$pick"
+}
+
+
+function setupremote {
+ mv -f $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` 2>/dev/null
+ if [ -d $TEMPLATES/remotes/$Remotetype ]
+ then
+ cd $TEMPLATES/remotes/$Remotetype
+ for i in lircd*
+ do
+ cat $i >> $BASE/etc/lircd.conf
+ done
+ cp -f lircrc* $BASE/etc/lircrc
+ chmod 755 /etc/lircrc
+ update_db_settings HostRemoteType "$Remotetype"
+ /usr/sbin/lircd -d /dev/lirc0
+ mkdir /root/.mythtv
+ ln -s /etc/lircrc /root/.mythtv/lircrc
+ fi
+}
+
+function scan_for_usb_remote () {
+echo "Scanning for usb receiver/remote"
+while read line
+do
+ USBID=`echo "$line"|cut -d"|" -f1`
+ lsusb -d "$USBID" > /dev/null 2>/dev/null
+ if [ $? = 0 ]
+ then
+ Remotetype=`echo "$line"|cut -d"|" -f2`
+ echo "found $Remotetype"
+ setupremote
+ break
+ fi
+done <$BASE/$TEMPLATES/remotes/receiver_usb.id
+}
+
+function rest_of_network () {
+ #netmask
+ echo $CMDLINE | grep -q netmask
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*netmask=}
+ NETMASK=${TEMPVAR%% *}
+ /sbin/ifconfig eth0 $IP netmask $NETMASK
+ nm=`/usr/bin/nmconv.py -obits $NETMASK`
+ NETMASK="/$nm $NETMASK"
+ echo $NETMASK
+ update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK"
+ else
+ echo "netmask not found"
+ fi
+ #gateway
+ echo $CMDLINE | grep -q gateway
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*gateway=}
+ GATEWAY=${TEMPVAR%% *}
+ /sbin/route add default gw $GATEWAY
+ update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY"
+
+ else
+ echo "gateway not found"
+ fi
+
+ #dns
+ echo $CMDLINE | grep -q dns
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*dns=}
+ DNS=${TEMPVAR%% *}
+ echo "nameserver $DNS" >> /etc/resolv.conf
+ update_db_settings HostDNS${MYTHDEFAULT} "$DNS"
+ else
+ echo "DNS not found"
+ fi
+}
+
+function init_network {
+ echo $CMDLINE |grep -q netdev
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*netdev=}
+ MYTHDEFAULT=${TEMPVAR%% *}
+ else
+ MYTHDEFAULT="eth0"
+ fi
+
+
+
+ echo $CMDLINE | grep -q ip
+ if [ $? = 0 ]
+ then
+ update_db_settings HostDefaulteth0 0
+ update_db_settings HostDefault${MYTHDEFAULT} 1
+
+ update_db_settings HostActiveonbooteth0 0
+ update_db_settings HostActiveonboot${MYTHDEFAULT} 1
+ update_db_settings HostNetDevice ${MYTHDEFAULT}
+
+ TEMPVAR=${CMDLINE#*ip=}
+ IP=${TEMPVAR%% *}
+ if [ x$IP = xdhcp ]
+ then
+ /sbin/dhcpcd $MYTHDEFAULT
+ update_db_settings HostUseDHCP${MYTHDEFAULT} 0
+ else
+ /sbin/ifconfig ${MYTHDEFAULT} $IP
+ update_db_settings HostUseDHCP${MYTHDEFAULT} 1
+ update_db_settings HostIP${MYTHDEFAULT} "$IP"
+ rest_of_network
+ fi
+ fi
+}
+
+function init_remote {
+ echo $CMDLINE | grep -q remoteport
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*remoteport=}
+ REMOTEPORT=${TEMPVAR%% *}
+ if [ x"$ReceiverType" = "xSerial" ]
+ then
+ if [ -e /dev/$REMOTEPORT ]
+ then
+ /usr/bin/setserial /dev/$REMOTEPORT uart none
+ /sbin/modprobe lirc_serial
+ update_db_settings HostReceiverType Serial
+ update_db_settings HostSerialPortlirc "$REMOTEPORT"
+ fi
+ fi
+
+ fi
+
+ echo $CMDLINE | grep -q remote
+ if [ $? = 0 ]
+ then
+ TEMPVAR=${CMDLINE#*remote=}
+ Remotetype=${TEMPVAR%% *}
+ setupremote
+ else
+ scan_for_usb_remote
+ fi
+}
+
+#-----------------------
+
+#set -x
+
+partition_it () {
+ROOT=$1
+DATA=$2
+SWAP=$3
+
+if [ ! x$SWAP = xNO ]
+ then
+ SWAPLINE=",$SWAP,S"
+ MKSWAPCMD="mkswap /dev/${disk}2"
+ else
+ SWAPLINE=",0,0"
+ MKSWAPCMD=""
+ fi
+
+if [ x$DATA = xALL ]
+then
+ DATALINE=",,,"
+ EXTRALINE=""
+else
+ DATALINE=",$DATA,,"
+ EXTRALINE=",0,,"
+fi
+sfdisk /dev/$disk -uM << EOF
+,$1,,*
+$SWAPLINE
+$DATALINE
+$EXTRALINE
+;
+EOF
+
+$MKSWAPCMD
+#sfdisk -l /dev/$disk
+}
+
+
+function fscmd () {
+
+case $1 in
+ reiserfs) FSCMDC="mkreiserfs -q -l ROOT"
+ ;;
+
+ xfs) FSCMDC="mkfs -t $1 -f"
+ ;;
+ ext3) FSCMDC="mkfs.ext3"
+ ;;
+ jfs) FSCMDC="mkfs.jfs -q "
+ ;;
+ *) FSCMDC="echo $1"
+ ;;
+
+esac
+}
+
+format_it () {
+ fscmd $1
+ $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n
+ fscmd $2
+ $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n
+}
+
+mount_it () {
+ if [ ! -d \/$mountpoint ]
+ then
+ mkdir \/$mountpoint
+ fi
+ mount /dev/${disk}1 \/$mountpoint
+ mkdir \/$mountpoint/myth
+ mount /dev/${disk}3 \/$mountpoint/myth
+}
+
+unmount_it () {
+ umount /dev/${disk}1
+ umount /dev/${disk}3
+}
+
+
+copy_it () {
+
+ if [ x$1 = xALL ]
+ then
+ echo "Transferring system"
+ unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
+ else
+ echo "Upgrading system"
+ unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf
+ fi
+
+ for i in sys proc dev tmp
+ do
+ mkdir /$mountpoint/$i
+
+ done
+ chmod 777 /$mountpoint/tmp
+ mknod /$mountpoint/dev/null c 1 3
+ mknod /$mountpoint/dev/null c 1 5
+ mknod /$mountpoint/dev/console c 5 1
+ chmod +s /$mountpoint/usr/bin/Xorg
+ chmod +s /$mountpoint/usr/bin/crontab
+ chmod +s /$mountpoint/usr/bin/sudo
+ chmod +s /$mountpoint/bin/mount
+
+}
+
+
+device_node () {
+ cd /dev
+ mknod hda b 3 0
+ mknod hda1 b 3 1
+ mknod hda2 b 3 2
+ mknod hda3 b 3 3
+ mknod hda4 b 3 4
+ mknod hda5 b 3 5
+ mknod hda6 b 3 6
+ mknod hda7 b 3 7
+ mknod hda8 b 3 8
+ mknod sda b 8 0
+ mknod sda1 b 8 1
+ mknod sda2 b 8 2
+ mknod sda3 b 8 3
+ mknod sda4 b 8 4
+ mknod sda5 b 8 5
+ mknod sda6 b 8 6
+ mknod sda7 b 8 7
+ mknod sda8 b 8 8
+ mknod sdb b 8 16
+ mknod sdb1 b 8 17
+ mknod sdb2 b 8 18
+ mknod sdb3 b 8 19
+ mknod sdb4 b 8 20
+ mknod sdb5 b 8 21
+ mknod sdb6 b 8 22
+ mknod sdb7 b 8 23
+ mknod sdb8 b 8 24
+ cd -
+ }
+
+
+function create_fstab()
+{
+echo "creating fstab"
+cat > /$mountpoint/etc/fstab << EOF
+# <file system> <dir> <type> <options> <dump> <pass>
+none /dev/pts devpts defaults 0 0
+none /dev/shm tmpfs defaults 0 0
+/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0
+/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
+UUID=ROOTUID / auto defaults 0 1
+UUID=DATAUID /myth auto defaults 0 1
+UUID=SWAPUID swap swap defaults 0 0
+EOF
+
+
+}
+
+
+function find_uuid() {
+ uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2`
+ echo $uuid for $1
+ FOUNDUUID=$uuid
+
+}
+
+
+case $1 in
+ partition_it )
+ #drive ROOT DATA(ALL) SWAP(NO)
+ for i in `mount | grep $disk | awk ' { print $1 } '`
+ do
+ umount $i
+ done
+ swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '`
+ swapoff $swap
+ partition_it $3 $4 $5
+ exit 0
+
+ ;;
+ format_it )
+ device_node
+
+ format_it $3 $4
+ exit 0
+ ;;
+ mount_it )
+ mount_it
+ ;;
+ copy_it )
+ copy_it $3
+
+ ;;
+
+
+ fstab_fix_it)
+ echo $@ >> /tmp/fstab.input
+ if [ ! -f /$mountpoint/etc/fstab ]
+ then
+ create_fstab
+ fi
+ #was 5
+ if [ x$3 = xUPGRADE ]
+ then
+ if [ ! -f /tmp/etc/KnoppMyth-version ]
+ then
+ if [ -f /tmp/etc/fstab ]
+ then
+ cp -f /tmp/etc/fstab /$mountpoint/etc/fstab
+ else
+ create_fstab
+ fi
+ else
+ create_fstab
+ fi
+ fi
+
+ #search for UUID
+ FOUNDUUID=""
+ find_uuid ${2}1
+ ROOTUUID=$FOUNDUUID
+ echo "--"
+ echo $ROOTUUID
+ echo "--"
+ FOUNDUUID=""
+ find_uuid ${2}2
+ SWAPUUID=$FOUNDUUID
+
+ FOUNDUUID=""
+ find_uuid ${2}3
+ DATAUUID=$FOUNDUUID
+
+
+ sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab
+ sed -i -e "s/.*\/myth\ .*$/UUID=$DATAUUID \/myth auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab
+ sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab
+
+#if Knoppmyth upgrade then loop through old fstab picking out vg
+ if [ -f /tmp/etc/KnoppMyth-version ]
+ then
+ if [ -f /tmp/etc/fstab ]
+ then
+ grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
+ grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
+ grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs chown -R mythtv:users
+ fi
+ fi
+ ;;
+
+ grub_it )
+ grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)"
+ #fixing grub/menu.1st
+ FOUNDUUID=""
+ find_uuid ${disk}1
+ ROOTUUID=$FOUNDUUID
+ sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst
+ mkinitcpio -g /$mountpoint/boot/kernel26.img
+ ;;
+ umount_it)
+ umount \/$mountpoint/myth
+ umount \/$mountpoint
+ ;;
+ update_db_it )
+ update_db_settings "$2" "$3"
+ ;;
+
+
+esac
+
+
+
diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh
new file mode 100755
index 0000000..bc89a1d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/install_proxy.sh
@@ -0,0 +1,526 @@
+#!/bin/bash
+#chroot and /tmp
+MVHOSTNAME=larch5
+. /etc/profile
+TEMP_TEMPLATES=/tmp/templates
+disk=$2
+rootfs=$3
+rootsize=$4
+datafs=$5
+datasize=$6
+swapsize=$7
+mountpoint="/new_boot"
+run=$MV_ROOT/bin/install_functions.sh
+. /etc/systemconfig 2>/dev/null
+. $MV_ROOT/bin/networkconfig.sh
+CMDLINE=$(cat /proc/cmdline)
+
+#TEMPNET="Hostip"$default_interface
+#eval MYTHIP=\$${TEMPNET}
+
+
+progress () {
+mypercent=`echo "$1" | cut -d. -f1`
+if [ x$mypercent = x ]
+then
+echo "" > /tmp/.install_percent
+else
+echo "${mypercent}% complete" > /tmp/.install_percent
+fi
+
+
+}
+
+function apply_new_auth () {
+#check if file is present
+ if [ -f /root/myth_user_call.out ]
+ then
+ #read in file, running each command in chroot
+ exec 4</root/myth_user_call.out
+ while read LINE <&4
+ do
+ if [ ! x"$LINE" = x ]
+ then
+ #run commands in chroot
+ chroot "$mountpoint" $MV_ROOT/bin/myth_user_call -i $LINE > /tmp/user_auth.update
+ fi
+ done
+ rm -f /root/myth_user_call.out
+ else
+ echo "No new password changes to apply"
+ fi
+}
+
+
+function backup_sql_check {
+
+ if [ -f $mountpoint/myth/backup/mythconverg.sql.gz ]
+ then
+ return 0
+ else
+ return 1
+ fi
+}
+
+function upgrade_mount_search {
+ MYTH_P=`cat /tmp/etc/fstab |grep /myth| awk ' {print $1 '} `
+ umount $mountpoint/myth
+ mount $MYTH_P $mountpoint/myth
+ return 0
+
+}
+
+
+full_install () {
+ if [ -f /tmp/.this_is_upgrade ]
+ then
+ rm /tmp/.this_is_upgrade
+ fi
+ echo "Partitioning $disk" > /tmp/.install_state
+ progress 1
+ sleep 1
+ $run partition_it $disk $rootsize $datasize $swapsize
+
+ echo "Formating $disk" > /tmp/.install_state
+ progress 2
+ sleep 1
+ $run format_it $disk $rootfs $datafs
+
+ echo "Preparing $disk" > /tmp/.install_state
+ progress 3
+ sleep 1
+ $run mount_it $disk
+
+ startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+
+ echo "STARTSIZE=$startsize">/tmp/.startsize.io
+ echo "Installing data" > /tmp/.install_state
+
+ sleep 1
+ $run copy_it $disk ALL
+ rm $mountpoint/etc/fstab
+ $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
+
+ progress 99
+ sleep 1
+ $run grub_it $disk
+
+
+ echo "Configuring system" > /tmp/.install_state
+ progress 100
+ sleep 1
+ cp -f /etc/systemconfig "$mountpoint"/etc
+ #run save syssettings to save settings, then copy to new mountpoint
+ $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
+ SE=$TEMPLATES/settings/syssettings
+ mkdir -p ${mountpoint}$SE
+ cp -rp $SE/* ${mountpoint}$SE/
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chown -R mythtv:mythtv ${mountpoint}$SE
+
+ chmod -R 775 ${mountpoint}$SE
+ chmod 775 "$mountpoint"/etc/systemconfig
+ #copy over any updates that might have occured
+ cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
+ chmod -R 755 ${mountpoint}/root
+ cp /etc/mtab "$mountpoint"/etc/mtab
+ apply_new_auth
+
+
+ if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
+ then
+ #installing DB to local machine
+ #turn off old live database, so the chroot one can start
+ /etc/rc.d/mysqld stop
+ mount --bind /dev "$mountpoint/dev"
+ chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+ echo "stopping mysql in chroot"
+ chroot "$mountpoint" /etc/rc.d/mysqld stop
+ umount "$mountpoint/dev"
+
+ #/etc/rc.d/mysqld start
+ else
+ #update remotedb with this host settings
+ chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ if [ ! $? = 0 ]
+ then
+ touch $mountpoint/tmp/.dbsysfailed
+ chmod 777 $mountpoint/tmp/.dbsysfailed
+ else
+ #Run second time
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ fi
+ fi
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced
+ touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure
+
+ echo "Done" > /tmp/.install_state
+ cp /tmp/mythvantage_install.log $mountpoint/var/log/
+ $run unmount_it $disk
+}
+
+function createsquashlist(){
+if [ -f $1 ]
+then
+ rm -f
+$1
+fi
+for i in bin boot etc home lib opt root sbin usr var
+do
+echo $i >> $1
+done
+
+
+}
+
+
+
+
+function upgrade () {
+ touch /tmp/.this_is_upgrade
+
+ if [ ! x$rootfs = "xDo_not_format" ]
+ then
+ echo "Formating $disk" > /tmp/.install_state
+ progress 2
+ sleep 1
+ $run format_it $disk $rootfs NO
+ fi
+ echo "Preparing $disk" > /tmp/.install_state
+ progress 3
+ sleep 1
+ $run mount_it $disk
+ startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+ echo "STARTSIZE=$startsize">/tmp/.startsize.io
+ echo "Installing data" > /tmp/.install_state
+ sleep 1
+ cp -rf /tmp/etc /new_boot/etc.old
+ cp -rf /tmp/oss /new_boot/var/lib/oss.old
+
+
+ SQUASHLIST="/tmp/.squashlist"
+ createsquashlist $SQUASHLIST
+ $run copy_it $disk $SQUASHLIST
+ #copy back ssh keys
+
+ cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
+ cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/
+ cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/
+ cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/
+
+ if [ ! -f /tmp/etc/KnoppMyth-version ]
+ then
+ #passwd/shadow/group
+ cp -fp /new_boot/etc.old/passwd /new_boot/etc/
+ cp -fp /new_boot/etc.old/shadow /new_boot/etc/
+ cp -fp /new_boot/etc.old/group /new_boot/etc/
+ fi
+
+ if [ x$rootfs = "xDo_not_format" ]
+ then
+ rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '`
+ fi
+ $run fstab_fix_it $disk UPGRADE
+
+ echo "Writing boot sector" > /tmp/.install_state
+ progress 99
+ sleep 1
+ $run grub_it $disk
+
+ echo "Configuring system" > /tmp/.install_state
+ progress
+ sleep 1
+ cp /etc/mtab "$mountpoint"/etc/mtab
+ cp -f /etc/systemconfig "$mountpoint"/etc
+#make sure mythconverg.sql.gz is present
+ if [ ! backup_sql_check ]
+ then
+ upgrade_mount_search
+ fi
+
+ if [ -f /tmp/etc/KnoppMyth-version ]
+ then
+ #run save syssettings to save settings, then copy to new mountpoint
+ $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
+ SE=$TEMPLATES/settings/syssettings
+ mkdir -p ${mountpoint}$SE
+ cp -rp $SE/* ${mountpoint}$SE/
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chown -R mythtv:mythtv ${mountpoint}$SE
+ chmod -R 775 ${mountpoint}$SE
+ touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade
+ fi
+
+ cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
+ chmod -R 755 ${mountpoint}/root
+ chown root:mythtv "$mountpoint"/etc/systemconfig
+ chmod 775 "$mountpoint"/etc/systemconfig
+ #mount /proc and /dev
+ mount --bind /dev "$mountpoint/dev"
+ mount --bind /proc "$mountpoint/proc"
+
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+ #wrap this in a network check_network, no need to update the db if the import worked.
+##### do I need to start mysql?
+ /etc/rc.d/mysqld stop
+ chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" > /tmp/chrootdb_km.out
+ if [ -f /tmp/etc/KnoppMyth-version ]
+ then
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings
+ else
+ chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+ fi
+ #
+ #Run second time
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+ chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
+ apply_new_auth
+ umount "$mountpoint/dev"
+ umount "$mountpoint/proc"
+
+ echo "Done" > /tmp/.install_state
+ cp /tmp/mythvantage_install.log $mountpoint/var/log/
+
+ $run unmount_it $disk
+ /etc/rc.d/mysqld start
+}
+
+function netboot-full_install () {
+ TEMPVAR=${CMDLINE#*nfsroot=}
+ NFSROOT=${TEMPVAR%% *}
+ NFSROOT=`echo $NFSROOT|cut -d: -f1`
+ MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
+ URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
+ echo "calling $URL"
+ echo "Starting" > /tmp/.install_state
+ curl $URL
+ ${MV_ROOT}/bin/xconfig.sh
+}
+
+function killdhcp () {
+if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
+ then
+ pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
+ kill -9 $pid
+ rm -f /etc/dhcpc/dhcpcd-eth0.pid
+ rm -f /var/run/dhcpcd*
+ fi
+if [ -f /var/run/dhcpcd-eth0.pid ]
+ then
+ pid=`cat /var/run/dhcpcd-eth0.pid`
+ kill -9 $pid
+ rm -f /var/run/dhcpcd-eth0.pid*
+ fi
+ip address flush dev eth0
+}
+
+
+
+function SANE_SYSETTINGS () {
+sed -e '/HOSTrootfstype/d' \
+ -e '/HOSTrootfstype/d' \
+ -e '/HOSTdatafstype/d' \
+ -e '/HOSTOSsize/d' \
+ -e '/HostUseALLdata/d' \
+ -e '/HOSTDATAsize/d' \
+ -e '/HOSTuprootfstype/d' \
+ -e '/HostUseSWAP/d' \
+ -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new
+ mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
+}
+
+case $1 in
+ full_install_it ) full_install ;;
+
+ NETBOOT)
+echo "-----------------------------------------------------------------------3-----"
+ netboot-full_install ;;
+
+ find_update)
+ #TRY TO mount first partition of drive
+ #copy /etc/systemconfig to live, import settings into db
+ #umount drive
+ $run mount_it $disk
+ if [ -f /new_boot/etc/systemconfig ]
+ then
+ ###########ADD templates
+ mkdir -p $TEMP_TEMPLATES
+ cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES
+ SANE_SYSETTINGS
+ cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/
+ cp /new_boot/etc/systemconfig /etc/systemconfig
+ cp -rf /new_boot/etc /tmp/etc
+ cp -rf /new_boot/var/lib/oss /tmp/oss
+
+ $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1
+ else
+ cp -rf /new_boot/etc /tmp/etc
+ #now we search for the timezone and try to update
+ TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1`
+ TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -`
+
+
+ if [ $TZREGION = $TZSUB ]
+ then
+ $run update_db_it HostTimeZoneRegion "$TZREGION"
+ else
+ $run update_db_it HostTimeZoneRegion "$TZREGION"
+ $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB"
+ fi
+
+
+
+ fi
+
+
+
+ $run umount_it $disk
+ ;;
+
+ upgrade_it)
+ #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&"
+ upgrade
+
+ ;;
+ disk_model_it)
+ model="unknown"
+ size="xxx"
+ case $2 in
+
+ h* )
+ model=`cat /proc/ide/$2/model`
+ ;;
+ s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
+ ;;
+ esac
+ size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' `
+
+
+ echo ""$model" $size " >/tmp/model
+
+ ;;
+ network_check_it)
+ #Should never return from check_network
+ case $2 in
+ setup_network)
+ vnc_check
+ install_network_setup
+ ;;
+
+ check_self)
+ myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
+ ping -c 1 $myipdefault
+ if [ ! $? = 0 ]
+ then
+ exit 3
+ #can't ping yourself
+ fi
+ ;;
+ check_gw)
+ #check gateway
+ mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'`
+ if [ ! x$mygwdefault = x ]
+ then
+ ping -c 1 $mygwdefault
+ if [ ! $? = 0 ]
+ then
+ exit 4
+ fi
+ fi
+ ;;
+ check_ns)
+ #check nameserver
+ mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
+ ping -c 1 $mydns
+ if [ ! $? = 0 ]
+ then
+ exit 5
+ fi
+ ;;
+ check_names)
+ host google.com
+ if [ ! $? = 0 ]
+ then
+ exit 6
+ fi
+ ;;
+ host_names)
+ #if host is found, then check to see if it's online
+ #if not online, assume it's ok to use this hostname
+
+ hout=`host $hostname`
+ status=$?
+ #found host, now grab the ip
+ if [ $status = 0 ]
+ then
+ hoip=`echo $hout|awk '{print $4}'`
+ ping -c 1 $hoip
+ if [ $? = 0 ]
+ then
+ status=0
+ else
+ status=1
+ fi
+ fi
+
+ if [ $status = 0 ]
+ then
+ exit 7
+ fi
+
+
+ ;;
+
+ esac
+ exit 0
+ ;;
+
+
+ * )
+ state=`cat /tmp/.install_state`
+ if [ x"${state}" = "xConfiguring system" ]
+ then
+ progress ""
+ else
+
+ if [ -f /tmp/.startsize.io ]
+ then
+ . /tmp/.startsize.io
+ #finding the drive
+ ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
+ used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
+ used=`echo $used-$STARTSIZE|bc`
+ #echo $used
+ fi
+
+ if [ ! x$used = x ]
+ then
+ . /root/.install_size
+ #somehow find if it's an install or update
+ if [ -f /tmp/.this_is_upgrade ]
+ then
+ total=$UPGRADESIZE
+ else
+ total=$TOTALSIZE
+ fi
+ percent=`echo "scale=2 ; ($used/$total) * 100 " |bc `
+ cond2=$(echo "$percent > 100" |bc )
+ if [ $cond2 -eq 1 ]
+ then
+ percent=100
+ fi
+ cond3=$(echo "$percent < 3" |bc )
+ if [ $cond3 -eq 0 ]
+ then
+ progress $percent
+ fi
+ fi
+ fi
+ ;;
+esac
+
+
+
diff --git a/abs/core-testing/LinHES-config/issue b/abs/core-testing/LinHES-config/issue
new file mode 100644
index 0000000..3c01679
--- /dev/null
+++ b/abs/core-testing/LinHES-config/issue
@@ -0,0 +1 @@
+LinHes
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-config/live-install.sh b/abs/core-testing/LinHES-config/live-install.sh
new file mode 100755
index 0000000..573bb1f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/live-install.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+#redirect stderr to stdout, then rediret stdout to file
+. /etc/profile
+exec 2>&1
+exec > /tmp/mythvantage_install.log
+. /etc/X11/STBWINDOWMANAGER
+/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
+keylaunch &
+/usr/bin/tilda &
+/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents &
+export MALLOC_CHECK_=0
+if [ -f /opt/vmware/bin32/vmware-user-wrapper ]
+then
+ /opt/vmware/bin32/vmware-user-wrapper &
+fi
+xhost +
+CMDLINE=$(cat /proc/cmdline)
+echo $CMDLINE |grep -q nfsroot
+NFSROOT=$?
+if [ x$NFSROOT = x1 ]
+then
+
+ unbuffer MythVantage &
+else
+ NETBOOT=YES MythVantage &
+fi
+
+exec $STBWINDOWMANAGER
diff --git a/abs/core-testing/LinHES-config/myth_user_call b/abs/core-testing/LinHES-config/myth_user_call
new file mode 100644
index 0000000..d95e468
--- /dev/null
+++ b/abs/core-testing/LinHES-config/myth_user_call
@@ -0,0 +1,164 @@
+#!/bin/bash
+#Wrapper script to manage USERNAME accounts + web security
+# myth_USERNAME_all -c add -u USERNAME
+# myth_USERNAME_all -c delete -u USERNAME
+# myth_USERNAME_all -c pass -u USERNAME -p pass
+# myth_USERNAME_all -c web -u USERNAME -p pass
+
+INIT_CHECK=TRUE
+FULL_CALL="$@"
+function CHROOT_CHECK {
+ INIT=`ps -p 1 -o comm=`
+ if [ x$INIT = xrunit ]
+ then
+ CHROOT_NEEDED=FALSE
+ else
+ CHROOT_NEEDED=TRUE
+ fi
+}
+
+function store_commands () {
+ echo "$FULL_CALL" >> /root/myth_user_call.out
+ chmod 600 /root/myth_user_call.out
+}
+
+
+function add_user() {
+ if [ $CHROOT_NEEDED = TRUE ]
+ then
+ echo "calling myth_call_user in chroot to add user"
+ store_commands
+ else
+ echo "adding user $USERNAME"
+ useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users
+ fi
+
+}
+
+
+function del_user() {
+ if [ $CHROOT_NEEDED = TRUE ]
+ then
+ echo "calling myth_call_user in chroot to delete user"
+ store_commands
+ else
+ echo "removing user $USERNAME"
+ userdel $USERNAME
+ fi
+
+}
+
+
+function pass_change() {
+ if [ $CHROOT_NEEDED = TRUE ]
+ then
+ echo "calling myth_call_user in chroot to change password"
+ store_commands
+ else
+ echo "changing password for $USERNAME"
+ echo $USERNAME:$PASSWORD | chpasswd
+ fi
+
+}
+
+
+function web_security {
+ echo "this is just a stub"
+
+}
+
+function ARG_ERR() {
+ if [ x$OPTARG = "x" ]
+ then
+ echo "$SWITCH NEEDS AND ARG"
+ exit 11
+ fi
+}
+
+
+function print_help {
+
+ echo "Valid options are:"
+ echo " -c (add|delete|pass|web)"
+ echo " -u USERNAMEname"
+ echo " -p password"
+ exit 1
+}
+
+if [ $# -eq 0 ]
+then
+ print_help
+fi
+
+declare -r OPTSTRING="c:u:p:i"
+while getopts "$OPTSTRING" SWITCH
+do
+ case $SWITCH in
+
+ c) ARG_ERR
+ OPERATION=$OPTARG
+ ;;
+ u) ARG_ERR
+ USERNAME=$OPTARG
+ ;;
+ p) ARG_ERR
+ PASSWORD=$OPTARG
+ ;;
+ i) INIT_CHECK=FALSE
+
+ esac
+done
+
+if [ $INIT_CHECK = TRUE ]
+then
+ CHROOT_CHECK
+else
+ CHROOT_NEEDED=FALSE
+fi
+
+case $OPERATION in
+ add)
+ if [ x$USERNAME = x ]
+ then
+ print_help
+ fi
+ add_user
+ ;;
+ delete)
+ if [ x$USERNAME = x ]
+ then
+ print_help
+ fi
+ del_user
+ ;;
+ pass)
+ if [ x$USERNAME = x ]
+ then
+ print_help
+ fi
+
+ if [ x$PASSWORD = x ]
+ then
+ print_help
+ fi
+ pass_change
+ ;;
+
+ web)
+ if [ x$USERNAME = x ]
+ then
+ print_help
+ fi
+
+
+ if [ x$PASSWORD = x ]
+ then
+ print_help
+ fi
+ echo "adding webUSERNAME $USERNAME with $PASS"
+ ;;
+ *) print_help
+ ;;
+esac
+
+
diff --git a/abs/core-testing/LinHES-config/networkconfig.sh b/abs/core-testing/LinHES-config/networkconfig.sh
new file mode 100644
index 0000000..61a7405
--- /dev/null
+++ b/abs/core-testing/LinHES-config/networkconfig.sh
@@ -0,0 +1,280 @@
+#!/bin/bash
+#. /etc/profile
+#. /etc/systemconfig
+#BASE=/tmp
+ETCNETDIR=$BASE/etc/net/ifaces
+
+
+
+function kill_dhcp ()
+{
+for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid
+do
+ if [ -f ${i} ]
+ then
+ pid=`cat ${i}`
+ kill -9 $pid
+ rm -f ${i}
+ fi
+ if [ x$1 = xflush ]
+ then
+ for ifdev in eth0 wlan0 eth1 wlan1
+ do
+ echo ${i} |grep $ifdev
+ status=$?
+ if [ $status = 1 ]
+ then
+ ip address flush $ifdev
+ fi
+ done
+ fi
+
+done
+
+}
+
+function setup_nameserver(){
+grep -q $1 ${BASE}/etc/resolv.conf
+status=$?
+if [ ! $status = 0 ]
+then
+ echo "nameserver $1" >> ${BASE}/etc/resolv.conf
+fi
+
+}
+
+function setup_interfaces() {
+ local IS_WIRELESS
+ local ip
+ local netmask
+ local isactive
+ local dns
+ local UseDHCP
+ local GW
+ local ESSID
+ local KEY
+ local ENCRYPT
+ local TEMPNET
+ IS_WIRELESS=false
+
+ #local ip
+ TEMPNET="Hostip"$1
+ echo $TEMPNET
+ eval ip=\$${TEMPNET}
+
+ TEMPNET=Hostnetmask$1
+ eval netmask=\$${TEMPNET}
+ netmask=`echo "$netmask" | cut -d " " -f1`
+
+ TEMPNET=HostActive$1
+ eval isactive=\$${TEMPNET}
+
+ TEMPNET=HostDNS$1
+ eval dns=\$${TEMPNET}
+
+ TEMPNET="HostUSEDHCP"$1
+ eval UseDHCP=\$${TEMPNET}
+
+ TEMPNET=HostGW$1
+ eval GW=\$${TEMPNET}
+
+
+
+ if [ $1 = wlan0 -o $1 = wlan1 ]
+ then
+ IS_WIRELESS=TRUE
+ TEMPNET=HostESSID$1
+ eval ESSID=\$${TEMPNET}
+
+ TEMPNET="HostKey"$1
+ eval KEY=\$${TEMPNET}
+
+ TEMPNET=HostUseEncryption$1
+ eval ENCRYPT=\$${TEMPNET}
+ fi
+
+
+ echo "Setup $1 in progress, wireless: $IS_WIRELESS"
+
+ if [ ! -d $ETCNETDIR/$1 ]
+ then
+ mkdir -p $ETCNETDIR/$1
+ fi
+
+ if [ ! -f $ETCNETDIR/$1/options ]
+ then
+ cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options
+ fi
+
+ if [ x$isactive = x0 ]
+ then
+ echo "setting $1 to inactive"
+ sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options
+
+ else
+ echo "setting $1 to active"
+ sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options
+ fi
+
+ if [ x$IS_WIRELESS = xTRUE ]
+ then
+ echo "setting $1 wireless"
+ sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options
+ #set the key and essid
+ echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig
+ if [ x$ENCRYPT = x1 ]
+ then
+ echo "key $KEY" >> $ETCNETDIR/$1/iwconfig
+ fi
+
+ else
+ echo "disabling wireless"
+ sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options
+ fi
+
+
+
+
+ if [ $UseDHCP = 0 ]
+ then
+ echo using dhcp
+ sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options
+
+ else
+ echo "using static ip"
+ sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options
+ echo "default via $GW" > $ETCNETDIR/$1/ipv4route
+ echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address
+ setup_nameserver $dns
+ fi
+}
+
+
+function find_active () {
+#HostActiveeth1="1"
+rm -f ${BASE}/etc/resolv.conf
+if [ x$MYTHDHCP = x1 ]
+ then
+ #add 127.0.0.1 to /etc/resolv.conf
+ echo "search lan" > ${BASE}/etc/resolv.conf
+ echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
+ fi
+
+for i in eth0 eth1 wlan0 wlan1
+do
+ CURRENTIF="HostActive"$i
+ eval IFSTATE=\$${CURRENTIF}
+ if [ x$IFSTATE = x1 ]
+ then
+ setup_interfaces $i
+ fi
+done
+}
+
+function setup_hostname {
+#set the hostname
+if [ ! x$hostname = x ]
+then
+ echo $hostname > ${BASE}/etc/hostname
+ cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts
+ #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts
+
+ if [ x$MYTHDHCP = x1 ]
+ then
+ echo "127.0.0.1 localhost " > ${BASE}/etc/hosts
+ echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts
+ else
+ echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts
+ fi
+ cat /tmp/hosts >> ${BASE}/etc/hosts
+fi
+
+kill_dhcp
+}
+
+function vnc_check() {
+ CMDLINE=$(cat /proc/cmdline)
+ echo $CMDLINE |grep -q vnc
+ USEVNC=$?
+ echo $CMDLINE |grep -q nfsroot
+ NETBOOT=$?
+ echo $USEVNC
+ if [ ! x$USEVNC = x0 ]
+ then
+ echo "not using vnc"
+ if [ ! x$NETBOOT = x0 ]
+ then
+ echo "not using netboot"
+ else
+ echo "using netboot"
+ USEVNC=0
+ fi
+
+ else
+ echo " using vnc"
+ fi
+}
+
+function setup_MYTH_vars {
+ TEMPMYTH="Hostip"$default_interface
+ #echo $TEMPMYTH
+ eval MYTHIP=\$${TEMPMYTH}
+
+ TEMPMYTH="HostUSEDHCP"$default_interface
+ eval MYTHDHCP=\$${TEMPMYTH}
+
+
+
+}
+
+
+
+function setup_network {
+ setup_MYTH_vars
+ setup_hostname
+ find_active
+}
+
+function start_network {
+if [ ! $USEVNC = 0 ]
+then
+ /etc/net/scripts/network.init restart
+
+else
+ echo "VNC/NETBOOT in use, will NOT restart network"
+fi
+
+}
+
+function stop_network {
+if [ ! $USEVNC = 0 ]
+then
+ echo "stopping the network"
+ kill_dhcp flush
+ ip address flush dev eth0 2>&1 >/dev/null
+ ip address flush dev eth1 2>&1 >/dev/null
+ ip address flush dev wlan0 2>&1 >/dev/null
+ ip address flush dev wlan1 2>&1 >/dev/null
+else
+ echo "VNC/NETBOOT in use, will NOT restart network"
+fi
+
+}
+
+
+#this is used by the install process to start the network
+function install_network_setup {
+ setup_MYTH_vars
+ setup_hostname
+ stop_network
+ find_active
+ start_network
+
+}
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/remove_service.sh b/abs/core-testing/LinHES-config/remove_service.sh
new file mode 100755
index 0000000..6cc4b4f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/remove_service.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+SERVICE_DIR=/var/service
+SCRIPT_DIR=/etc/sv
+if [ -e $SERVICE_DIR/$1 ]
+then
+ echo "removing"
+ rm $SERVICE_DIR/$1
+fi
diff --git a/abs/core-testing/LinHES-config/restore_default_settings.sh b/abs/core-testing/LinHES-config/restore_default_settings.sh
new file mode 100755
index 0000000..5690f48
--- /dev/null
+++ b/abs/core-testing/LinHES-config/restore_default_settings.sh
@@ -0,0 +1,349 @@
+#!/bin/bash
+. /etc/profile
+. /etc/systemconfig
+shopt -s -o nounset
+echo $@ >> /tmp/restore.out
+#TEMPLATES="/usr/share/templates/settings"
+TEMPLATES="$TEMPLATES/settings"
+TABLES="settings keybindings"
+MYTHDBUSER=mythtv
+MYTHTVPASSWD=mythtv
+declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho"
+Thistemplate=""
+declare -i OVERRIDE=0
+declare -i EVERYTHING=0
+
+function CMD_DEFINE () {
+ #add override check
+ if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ]
+ then
+ MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
+ MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
+ MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";"
+ else
+ MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
+ MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
+ MYSQLCMD_UPDATE_HOST="select hostname from settings;"
+ fi
+}
+
+function SQL_DEFINE () {
+ #$1 is the table name
+ if [ $1 = "settings" ]
+ then
+ ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )"
+ else
+ ALTERSQL=";"
+ fi
+
+ CREATESQL="create table temp_${1}_${hostname} like $1;"
+ COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");"
+ INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';"
+ #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';"
+ DROPSQL="delete from $1 where hostname=\"$hostname\";"
+ COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");"
+ DROP_TABLE="Drop table temp_${1}_${hostname}"
+}
+
+function ARG_ERR() {
+ if [ x$OPTARG = "x" ]
+ then
+ echo "$SWITCH NEEDS AND ARG"
+ exit 11
+ fi
+}
+
+function ALSADEVICE () {
+#ALSA:hw:1,4
+ if [ x$Audiotype = xALSA ]
+ then
+ SoundDevice=ALSA:$SoundDevice
+ fi
+}
+
+
+
+if [ $# -eq 0 ]
+then
+ echo "Valid options are:"
+ echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)"
+ echo " -t (syssettings|hostsettings)"
+ echo " -d databasename"
+ echo " -h hostname"
+ echo " -s systemtype (master|slave|standalone|frontendonly)"
+ echo " -a ipaddress"
+ echo " -z zipcode"
+ echo " -o override (only used upgrade installs)"
+ exit 1
+fi
+
+
+
+
+while getopts "$OPTSTRING" SWITCH
+do
+ case $SWITCH in
+ # \?) echo "unkown option"
+ # exit 11 ;;
+ c) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ OPERATION=$OPTARG
+ ;;
+ t) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ Thistemplate=$OPTARG
+
+ if [ x$Thistemplate = x"syssettings" ]
+ then
+ echo "template is syssettings"
+ loadhost=false
+ elif [ x$Thistemplate = x"hostsettings" ]
+ then
+ echo "template is hostsettings"
+ Thistemplate=syssettings
+ loadhost=true
+ else
+ echo "invalid template name"
+ exit 1
+ fi
+ ;;
+ d) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ if [ $OVERRIDE = 1 ]
+ then
+ ovdbhost=$OPTARG
+ else
+ dbhost=$OPTARG
+ fi
+ ;;
+ h) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ if [ $OVERRIDE = 1 ]
+ then
+ oldhostname=$hostname
+ hostname=$OPTARG
+ else
+ hostname=$OPTARG
+ fi
+
+ ;;
+ s) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ SYSTEMTYPE=$OPTARG
+ ;;
+ a) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ IP_ADDRESS=$OPTARG
+ ;;
+ z) echo "$SWITCH" "$OPTARG"
+ ARG_ERR
+ ZIPCODE=$OPTARG
+ ;;
+ o) OVERRIDE=1
+ ;;
+
+ esac
+done
+
+echo $OVERRIDE
+
+#setup the Mysql commands
+CMD_DEFINE
+
+$MYSQLCMD_C "show tables" > /dev/null
+status=$?
+if [ $status = 1 ]
+then
+ echo "$@ failed"
+ echo "$@ failed" >> /tmp/restore.out
+ exit 1
+fi
+
+
+
+
+
+
+
+case $OPERATION in
+
+ restore)
+ #used to restore settings from syssettings
+ if [ -d $TEMPLATES/$Thistemplate ]
+ then
+ cd $TEMPLATES/$Thistemplate
+ if [ $loadhost = false ]
+ then
+ for i in $TABLES
+ do
+ SQL_DEFINE $i
+ sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt
+ #echo $MYSQLCMD "$SELECTSQL"
+ echo $i
+ $MYSQLCMD "$CREATESQL"
+ $MYSQLCMD "$ALTERSQL"
+ $MYSQLCMD "$COPY_TMP_SQL"
+ $MYSQLCMD "$INSERTSQL"
+ $MYSQLCMD "$DROPSQL"
+ $MYSQLCMD "$COPY_BCK_SQL "
+ $MYSQLCMD "$DROP_TABLE "
+ #rm /tmp/$i.txt
+ done
+ fi
+ if [ $loadhost = true ]
+ then
+ #only load the settings table with values HOST
+ i=settings
+ SQL_DEFINE $i
+ sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt
+ echo $i
+ $MYSQLCMD "$CREATESQL"
+ $MYSQLCMD "$ALTERSQL"
+ $MYSQLCMD "$INSERTSQL"
+ $MYSQLCMD "$COPY_TMP_SQL"
+ $MYSQLCMD "$DROPSQL"
+ $MYSQLCMD "$COPY_BCK_SQL"
+ $MYSQLCMD "$DROP_TABLE "
+ fi
+ else
+ echo "couldn't find $TEMPLATES/$Thistemplate"
+ fi
+ ;;
+
+ save)
+
+ if [ ! -d $TEMPLATES/$Thistemplate ]
+ then
+ mkdir -p $TEMPLATES/$Thistemplate
+ fi
+
+ cd $TEMPLATES/$Thistemplate
+ for i in $TABLES
+ do
+ EXTRACLAUSE=""
+ case $i in
+ settings)
+ EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value"
+ SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
+ # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
+ $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
+ ;;
+ keybindings)
+ SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
+ $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
+ ;;
+ esac
+ # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i
+
+ done
+ ;;
+
+ load)
+
+ #will load both default_1 and default_2 unless either file is not found
+ for i in default_1 default_2
+ do
+ if [ -f $TEMPLATES/$i/settings.txt ]
+ then
+ echo $i
+ for tablename in $TABLES
+ do
+ #create table
+ CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;"
+ $MYSQLCMD_C "$CREATESQL"
+ #truncate table
+ TRUNCATESQL="truncate ${tablename}_${i} "
+ $MYSQLCMD_C "$TRUNCATESQL"
+ #load table
+ INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';"
+ $MYSQLCMD_C "$INSERTSQL"
+ #update_hostname
+ UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; "
+ $MYSQLCMD_C "$UPDATEHOSTNAMESQL"
+ done
+ else
+
+ echo "couldn't find $TEMPLATES/$i/settings.txt template to load"
+ fi
+ CREATESQL="create table IF NOT EXISTS settings_user1 like settings;"
+ $MYSQLCMD_C "$CREATESQL"
+ CREATESQL="create table IF NOT EXISTS settings_user2 like settings;"
+ $MYSQLCMD_C "$CREATESQL"
+ CREATESQL="create table IF NOT EXISTS settings_user3 like settings;"
+ $MYSQLCMD_C "$CREATESQL"
+
+ CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;"
+ $MYSQLCMD_C "$CREATESQL"
+ CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;"
+ $MYSQLCMD_C "$CREATESQL"
+ CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;"
+ $MYSQLCMD_C "$CREATESQL"
+ done
+;;
+
+
+
+ BECONFIG)
+ if [ $SYSTEMTYPE = "master" ]
+ then
+ $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';"
+ $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";"
+ fi
+
+ if [ $SYSTEMTYPE = "slave" ]
+ then
+ $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";"
+ fi
+ ;;
+ ZIP)
+ $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";"
+ $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";"
+ ;;
+ MUSICFRONT)
+ ALSADEVICE
+ $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";"
+ #need to reload the settings.
+ systemconfig.sh reloadfe
+ ;;
+ MUSICMYTH)
+ ALSADEVICE
+ $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";"
+ ;;
+ uhostname)
+ #used when the hostname is changed.
+ TABLES="settings capturecard keybindings storagegroup recorded"
+ for i in $TABLES
+ do
+ USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;"
+ $MYSQLCMD_C "$USQL"
+ done
+
+ ;;
+ USERJOBALLOW)
+ SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;"
+ $MYSQLCMD_C "$SQL"
+ ;;
+
+ ACCESSCONTROL)
+ LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound"
+
+ for i in $LIST
+ do
+ $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";"
+ $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";"
+ done
+ SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;"
+ $MYSQLCMD_C "$SQL"
+ esac
+
+#SELECT * INTO OUTFILE 'data.txt'
+# FIELDS TERMINATED BY ','
+# FROM table2;
+
+
diff --git a/abs/core-testing/LinHES-config/restore_km_db_chroot.sh b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh
new file mode 100644
index 0000000..9467ffd
--- /dev/null
+++ b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+. /etc/profile
+. /etc/systemconfig
+set -x
+#myhost=`cat /etc/hostname`
+myhost=$hostname
+hostname $myhost
+mount -t proc none /proc
+DBFILE=$1
+
+if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
+ then
+ #restore database
+ pacman --noconfirm -Sf mysql
+ status=1
+ mysqlstatus=1
+ while [ ! $status = 0 ]
+ do
+ /etc/rc.d/mysqld stop
+ sleep 1
+ /etc/rc.d/mysqld start
+ mysqlstatus=$?
+ if [ $mysqlstatus = 0 ]
+ then
+ mysql -e "show databases;"
+ showstatus=$?
+ if [ $showstatus = 0 ]
+ then
+ #load database
+ pacman --noconfirm -R mythdb-initial
+ pacman --noconfirm -S mythdb-initial
+ echo "restoring old database"
+ gunzip -c /myth/backup/mythconverg.sql.gz > /myth/backup/mythconverg.sql
+ mysql mythconverg < /myth/backup/mythconverg.sql
+
+
+ if [ -d /var/lib/mysql/mythconverg ]
+ then
+ status=0
+ fi
+ fi
+ fi
+ done
+ rm -f /myth/backup/mythconverg.sql
+ else
+ exit 0
+ fi
+
+#/etc/rc.d/mysqld stop
+#umount /proc
+
+
+
diff --git a/abs/core-testing/LinHES-config/soundconfig.sh b/abs/core-testing/LinHES-config/soundconfig.sh
new file mode 100755
index 0000000..1adb447
--- /dev/null
+++ b/abs/core-testing/LinHES-config/soundconfig.sh
@@ -0,0 +1,248 @@
+#!/bin/bash
+. /etc/systemconfig
+. /etc/profile
+echo $@ >/tmp/audio.call
+#set -x
+BASE=""
+. /etc/profile
+#TEMPLATES="/usr/share/templates"
+TESTFILE="$TEMPLATES/audio/space_battle_A.wav"
+OSSinstalled="false"
+
+function testaudio () {
+
+ossplay -d$AUDIODEVICE $TESTFILE
+
+}
+
+function load_alsa() {
+
+ remove_service.sh alsa-utils
+# cd /lib/modules/2.6.21-STB
+ KER=`uname -r`
+ cd /lib/modules/$KER/kernel/
+ tar -xvf alsa-$KER.tar
+ pacman -Sf --noconfirm alsa-lib
+
+ depmod -a
+ cd -
+ udevsettle
+ udevsettle
+ udevtrigger
+
+ add_service.sh alsa-utils
+ sleep 4
+ sv start alsa-utils
+}
+
+
+function unload_alsa () {
+#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
+ sv stop alsa-utils
+ remove_service.sh alsa-utils
+ rm -rf /dev/adsp*
+ rm -rf /dev/snd/*
+ rm -rf /dev/audio
+ modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
+}
+
+function unload_oss {
+ sv stop oss
+ soundoff
+ rm -rf /dev/dsp*
+ rm -rf /dev/oss*
+ rm -rf /dev/sndstat
+ remove_service.sh oss
+}
+
+function installOSS {
+ echo "installing oss"
+ add_service.sh oss
+ sleep 4
+ sv start oss
+}
+
+
+function SYNCXINE {
+echo "modify xine config file"
+ if [ -f /data/home/mythtv/.xine/config ]
+ then
+ cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config
+ else
+ cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config
+ fi
+
+ if [ x$Audiotype = xOSS ]
+ then
+ DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp `
+ sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \
+ -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \
+ -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \
+ -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \
+ $TEMPLATES/xine.config > /data/home/mythtv/.xine/config
+ else
+ cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config
+ fi
+
+}
+
+function SYNCMPLAYER {
+echo "modify mplayer not implmented yet"
+}
+
+function SYNCMYTHMUSIC {
+echo "sync mythmusic"
+$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH
+}
+
+function SYNCMYTHFRONTEND {
+echo "sync mythfrontend"
+$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT
+}
+
+
+function checkOSSinstalled () {
+ ossinfo 1>/dev/null
+ resultcode=$?
+ echo $resultcode
+ if [ $resultcode = 0 ]
+ then
+ OSSinstalled='true'
+ else
+ OSSinstalled='false'
+ fi
+}
+
+function sound_config_system {
+
+ if [ x$syncXine = x1 ]
+ then
+ SYNCXINE
+ fi
+ if [ x$syncMplayer = x1 ]
+ then
+ SYNCMPLAYER
+ fi
+ if [ x$syncMythMusic = x1 ]
+ then
+ SYNCMYTHMUSIC
+ fi
+ if [ x$syncMythFrontend = x1 ]
+ then
+ SYNCMYTHFRONTEND
+ fi
+
+}
+
+function loadsound (){
+ checkOSSinstalled
+ if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ]
+ #then
+ # if [ $OSSinstalled = "false" ]
+ then
+ while [ $OSSinstalled = "false" ]
+ do
+ unload_alsa
+ rm /tmp/.alsatest
+ installOSS
+ installOSS
+ sleep 2
+ checkOSSinstalled
+ done
+ # fi
+ else
+ touch /tmp/.alsatest
+ unload_oss
+ load_alsa
+ load_alsa
+ rm /tmp/.alsatest
+
+ fi
+
+}
+
+
+
+
+#####################MAIN PROGRAM##########################
+
+declare -r OPTSTRING="i:t:d:"
+
+if [ $# -eq 0 ]
+then
+ echo "Valid options are:"
+ echo " -i (oss|alsa) oss or alsa subsystem "
+ echo " -t (test|real|LOAD) "
+ echo " -d device"
+ exit 1
+fi
+
+
+
+
+while getopts "$OPTSTRING" SWITCH
+do
+ case $SWITCH in
+ \?) echo "unkown option"
+ exit 11 ;;
+ i) echo "$SWITCH" "$OPTARG"
+ AUDIOTYPE="$OPTARG"
+ ;;
+ d) echo "$SWITCH" "$OPTARG"
+ AUDIODEVICE=$OPTARG
+ ;;
+ t) echo "$SWITCH" "$OPTARG"
+ SOUNDOPTYPE="$OPTARG"
+ if [ x"$OPTARG" = xtest ]
+ then
+ TEST=true
+ else
+ TEST=false
+ fi
+
+
+ ;;
+
+ esac
+done
+
+
+
+
+case $SOUNDOPTYPE in
+ REAL|real )
+ loadsound
+ sound_config_system
+ ;;
+ test|TEST)
+ echo $@ > /tmp/audio.test
+ #loadsound
+ if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ]
+ then
+ echo "testing OSS $AUDIODEVICE "
+ ossplay -d$AUDIODEVICE $TESTFILE
+ else
+ echo "testing ALSA $AUDIODEVICE "
+ aplay --device=$AUDIODEVICE $TESTFILE
+ fi
+
+ ;;
+
+ LOAD|load)
+ loadsound
+ ;;
+ esac
+
+
+exit 0
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/startx b/abs/core-testing/LinHES-config/startx
new file mode 100755
index 0000000..0ffdf8c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/startx
@@ -0,0 +1,29 @@
+#!/bin/bash
+. /etc/profile
+
+export USER=root
+export HOME=/root
+#TEMPLATES=/usr/share/templates
+
+CMDLINE=$(cat /proc/cmdline)
+TEMPVAR=${CMDLINE#*ip=}
+IP=${TEMPVAR%% *}
+echo $CMDLINE |grep -q vnc
+USEVNC=$?
+
+if [ x$USEVNC = x1 ]
+then
+ $MV_ROOT/bin/xconfig.sh
+ cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
+ startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail
+ else
+ #VNC
+ pacman -Sf --noconfirm tightvnc
+ cd /root
+ mkdir .vnc
+ echo mythvantage |vncpasswd -f > /root/.vnc/passwd
+ chmod 500 /root/.vnc/passwd
+ rm /root/.vnc/xstartup
+ ln -s /root/live-install.sh /root/.vnc/xstartup
+ vncserver
+fi
diff --git a/abs/core-testing/LinHES-config/systemconfig.sh b/abs/core-testing/LinHES-config/systemconfig.sh
new file mode 100755
index 0000000..845c67c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/systemconfig.sh
@@ -0,0 +1,1255 @@
+#!/bin/bash
+###################################################################
+#Script to configure your system based off the values in /etc/systemconfig
+#Any changes made to config files will be removed when systemconfig.sh is run
+#
+#JM
+###################################################################
+#set -x
+. /etc/profile
+#MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2`
+MVRELEASE=`cat /etc/LinHES-release `
+echo $@ >/tmp/systemconfig.call
+echo "----------------------start of systemconfig $@ ----------------------"
+BASE=""
+
+#TEMPLATES="/usr/share/templates"
+. /etc/profile
+. $MV_ROOT/bin/networkconfig.sh
+PACMAN="pacman --noconfirm"
+postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype`
+PKGBLACKLIST=$BASE/etc/blacklist.package
+
+if [ x$1 = x"Mysql_only" ]
+ then
+ rm -f /tmp/mysql.txt
+ sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt
+ exit 0
+ fi
+
+
+if [ -f /etc/systemconfig ]
+then
+ . /etc/systemconfig
+TEMPNET="Hostip"$default_interface
+echo $TEMPNET
+eval MYTHIP=\$${TEMPNET}
+else
+ echo "could not find /etc/systemconfig"
+ exit 1
+fi
+
+
+
+#-----------------------------------------------------
+
+
+function setupmysql {
+#setup mysql.txt to find the database servers
+ if [ $SystemType = "Master_backend" ]
+ then
+ if [ $MYTHDHCP = 0 ]
+ then
+ #this grabs eth0, as that is all thats supported.
+# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
+ dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
+ sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
+ cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
+ ##logic to change master_serverip and backend_serverip in db
+ ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
+ else
+
+ dbhost=$MYTHIP
+ sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
+ cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
+ #logic to change dbhost in db
+ ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
+ fi
+ fi
+
+ if [ $SystemType = "Slave_backend" ]
+ then
+ if [ $MYTHDHCP = 0 ]
+ then
+ #this grabs eth0, as that is all thats supported.
+ #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
+ slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
+ ##logic to change backend_serverip in db
+ ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost
+ else
+ slavehost=$MYTHIP
+
+ #logic to change backend_serverif in db
+ ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost
+ fi
+ fi
+
+ MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt
+ if [ $SystemType = "Standalone" ]
+ then
+ sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT
+ else
+ sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT
+ fi
+ rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt
+ rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt
+ if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ]
+ then
+ cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT
+ fi
+
+ chmod 755 $MYSQLTXT
+ chown mythtv $MYSQLTXT
+
+}
+
+function setupmysqlnetwork(){
+MFILE=etc/my.cnf
+grep "#skip-networking" $BASE/$MFILE
+status=$?
+
+
+
+ if [ $SystemType = "Standalone" ]
+ then
+ sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE
+ if [ $status = 0 ]
+ then
+ sudo sv restart mysql
+ echo "restarting mysql with no network"
+ fi
+
+ fi
+
+ if [ $SystemType = "Master_backend" ]
+ then
+ sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE
+ if [ $status = 1 ]
+ then
+ sudo sv restart mysql
+ echo "restarting mysql with network"
+ fi
+
+ fi
+
+
+}
+
+
+function settimezone {
+#set the timezone
+if [ x"$timezone" = x ]
+then
+ timezone="unknown"
+fi
+rm ${BASE}/etc/localtime
+echo $timezone
+ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime
+ sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf
+
+ # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock
+ # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock
+ # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock
+cp $TEMPLATES/rc.conf /etc/rc.conf
+
+}
+
+
+function setupreceiver {
+ case $ReceiverType in
+ tinker) echo "do nothing"
+ ;;
+ Serial) echo "setup serial lirc"
+ sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
+ echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage
+ /usr/bin/load-modules-mythvantage.sh
+ ;;
+ Usb-imon) echo "setup receiver-usb-imon"
+ sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
+ echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage
+ /usr/bin/load-modules-mythvantage.sh
+ ;;
+ *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
+ ;;
+ esac
+
+
+}
+
+function setupremote {
+ case $Remotetype in
+ no_remote) echo "No remote selected"
+ daemon_remove="lircd $daemon_remove"
+ ;;
+ tinker) echo "Remote in tinker mode"
+ ;;
+ *) echo "Setup remote"
+ mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
+ cd $TEMPLATES/remotes/$Remotetype
+ for i in lircd*
+ do
+ cat $i >> ${BASE}/etc/lircd.conf
+ done
+ cp lircrc ${BASE}/etc/lircrc
+ if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
+ then
+ cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc
+ cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf
+ fi
+ if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ]
+ then
+ cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf
+ fi
+ chmod 755 /etc/lircrc
+ daemon_add="lircd $daemon_add"
+ sv hup lircd
+ ;;
+esac
+
+}
+
+function setupblaster {
+ #cd $TEMPLATES/transmit/$Blastertype
+ #for i in lircd*
+ #do
+ # cat lircd.conf >> ${BASE}/etc/lircd.conf
+ #done
+ # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '`
+ sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh
+ chmod 755 ${BASE}/usr/bin/change_chan.sh
+ #channel change script change
+ setupremote
+
+}
+
+function setupevrouter {
+ if [ x$UseEvrouter = x1 ]
+ then
+ case x$EvrouterConfig in
+ xtinker )
+ echo "do nothing for evrouter"
+ ;;
+ x ) echo "empty evrouter"
+ ;;
+ * ) echo "setup evrouter for $EvrouterConfig "
+ cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg
+ daemon_add="evrouter Xvfb $daemon_remove"
+
+ ;;
+ esac
+ else
+ # disable evrouter
+ daemon_remove="evrouter Xvfb $daemon_remove"
+ fi
+
+
+
+
+}
+
+function setupLCD {
+ case x$LCDtype in
+ xtinker) echo "do nothing"
+ ;;
+ xno_lcd) echo "disabling lcd"
+ sv down lcdd
+ /usr/bin/load-modules-mythvantage.sh UNLOAD LCD
+ sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
+ daemon_remove="lcdd $daemon_remove"
+ ;;
+ x) echo "empty lcd" ;;
+
+ *) echo "setup lcd"
+ if [ -f $TEMPLATES/LCD/$LCDtype/modules ]
+ then
+ sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
+ cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage
+ #should also modprobe
+ fi
+
+
+ if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]
+ then
+ cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc
+ # install="lcdproc $install"
+ daemon_add="lcdd $daemon_add"
+ /usr/bin/load-modules-mythvantage.sh
+ RESTART_FE="true"
+ RESTART_LCD="true"
+ fi
+ #check if lirc capable,if so then call setupremote
+ if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
+ then
+ setupremote
+ fi
+ ;;
+ esac
+
+}
+
+
+
+function scrubnfs {
+ cp /etc/fstab $TEMPLATES/fstab.conf.template
+ grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab
+ }
+
+function setupfstab () {
+# setupfstab $NFSserver $NFSshare $NFSmount
+ echo "$1 $2 nfs" >> ${BASE}/etc/fstab
+ if [ ! -e "$2" ]
+ then
+ mkdir -p "$2"
+ chown mythtv:mythtv "$2"
+ fi
+ if [ x$DCONFIG = x ]
+ then
+ mount $2 &
+ fi
+
+}
+
+function setupncidclient
+{
+ sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf
+}
+
+function setupnciddaemon {
+ cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template
+ sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf
+
+}
+
+function setupntp () {
+cat > ${BASE}/etc/ntp.conf << EOF
+# default restrictions
+restrict default noquery notrust nomodify
+# NTP drift file - used to keep track of your system clocks
+# time deviation
+driftfile /etc/ntp.drift
+
+# NTP log file
+logfile /var/log/ntp.log
+# override the default restrictions here, servers that can query
+restrict 192.168.0.0 mask 255.255.0.0 nomodify
+restrict 10.0.0.0 mask 255.0.00 nomodify
+
+#servers to sync with
+EOF
+ #this is used for backend or standlone types
+ if [ $1 = "1" ]
+ then
+ echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf
+ echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf
+ echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf
+ echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf
+
+ else
+ echo "server $dbhost" >> ${BASE}/etc/ntp.conf
+ echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf
+ fi
+
+
+}
+
+function setupplugins (){
+
+pkglistinstall=""
+pkglistremove=""
+#default enabled
+for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo
+do
+eval pkgvalue=\$${i}
+
+if [ x$pkgvalue = x ]
+ then
+ pkglistinstall="$pkglistinstall $i$postfix"
+ else
+ if [ x$pkgvalue = x1 ]
+ then
+ pkglistinstall="$pkglistinstall $i$postfix"
+ else
+ pkglistremove="$pkglistremove $i$postfix"
+ fi
+ fi
+
+
+
+done
+
+
+
+#default disabled
+ for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather
+ do
+eval pkgvalue=\$${i}
+
+if [ x$pkgvalue = x ]
+ then
+ pkglistremove="$pkglistremove $i$postfix"
+ else
+ if [ x$pkgvalue = x1 ]
+ then
+ pkglistinstall="$pkglistinstall $i$postfix"
+ else
+ pkglistremove="$pkglistremove $i$postfix"
+ fi
+ fi
+ done
+install="$pkglistinstall $install"
+remove="$pkglistremove $remove"
+
+}
+function LCDcheck () {
+ case x$LCDtype in
+ xtinker) echo "do nothing lcd "
+ ;;
+ xno_lcd) echo "no lcd "
+ ;;
+ xxosd) install="xosd lcdproc $install"
+ ;;
+ x) echo "lcd empty "
+ ;;
+ *)
+ install="lcdproc $install"
+ ;;
+esac
+}
+
+
+function packages () {
+#see which plugins need to be installed
+echo " Starting to install Packages"
+setupplugins
+LCDcheck
+if [ ! -f $PKGBLACKLIST ]
+then
+ touch $PKGBLACKLIST
+fi
+ for i in $remove
+ do
+ echo "-----------$i --------------"
+ grep -q $i $PKGBLACKLIST
+ if [ $? = 1 ]
+ then
+ pacman -Q $i 2>/dev/null
+ #VAR=`pacman -Q $i 2>&1 `
+ if [ $? = 0 ]
+ then
+ if [ $i = "mythweb$postfix" ]
+ then
+ pacman --noconfirm -R mythweb$postfix
+ echo removed $i
+ else
+ pacman --noconfirm -Rs $i
+ echo removed $i
+ fi
+ fi
+ else
+ echo "$i is black listed"
+ fi
+ done
+ # fi
+
+ for i in $install
+ do
+ echo "-----------$i --------------"
+ grep -q $i $PKGBLACKLIST
+ if [ $? = 1 ]
+ then
+ pacman -Q $i 2>/dev/null
+ #VAR=`pacman -Q $i 2>&1 `
+ # echo $VAR |grep -vq error:
+
+ if [ ! $? = 0 ]
+ then
+ pacman --noconfirm -Sf $i
+ echo installed $i
+ else
+ echo "$i already installed"
+ fi
+ else
+ echo "$i is black listed"
+ fi
+ done
+}
+
+function daemons {
+echo "Daemons on boot"
+
+ for i in $daemon_remove
+ do
+ sv check $i 1>/dev/null
+ status=$?
+ if [ $status -eq 0 ]
+ then
+ sv down $i
+ fi
+ remove_service.sh $i
+ done
+
+
+ for i in $daemon_add
+ do
+ sv check $i 1>/dev/null
+ status=$?
+ add_service.sh $i
+
+ if [ $status -eq 0 ]
+ then
+ case $i in
+ mysql*) sv hup $i
+ ;;
+ mythback*) sv hup $i
+ ;;
+ lirc* ) sv hup $i
+ ;;
+ frontend) sv check frontend 1>/dev/null
+ ;;
+
+ smbd ) sv hup $i
+ ;;
+ nmbd ) sv hup $i
+ ;;
+ evrouter) sv restart $i
+ ;;
+ *) sv down $i
+ sleep 1
+ sv up $i
+ ;;
+ esac
+ fi
+
+ done
+
+}
+
+
+function services
+{
+ser_install=""
+ser_daemon_add=""
+ser_remove=""
+ser_daemon_remove=""
+if [ x$UseEvrouter = x1 ]
+then
+ ser_daemon_add="evrouter Xvfb $ser_daemon_add"
+else
+ ser_daemon_remove="evrouter Xvfb $ser_remove"
+fi
+
+if [ x$RunDHCP = x1 ]
+then
+ ser_daemon_add="dnsmasq $ser_daemon_add"
+ ser_install="dnsmasq mvpmc $ser_install"
+
+else
+ ser_daemon_remove="dnsmasq $ser_daemon_remove"
+ ser_remove="dnsmasq mvpmc $ser_remove"
+fi
+
+if [ x$RunFrontend = x1 ]
+then
+ ser_daemon_add="frontend hal $ser_daemon_add"
+ ser_install=" $ser_install"
+ showX=true
+ else
+ ser_daemon_remove="frontend hal $ser_daemon_remove"
+ ser_remove="$ser_remove"
+ fi
+
+if [ x$UseMythWEB = x1 ]
+then
+ ser_install="lighttpd mythweb$postfix $ser_install"
+ ser_daemon_add="lighttpd $ser_daemon_add"
+ else
+ ser_remove="mythweb$postfix $ser_remove"
+ ser_daemon_remove="$ser_daemon_remove"
+ fi
+
+#samba
+if [ x$UseSamba = x1 ]
+then
+ ser_install="samba $ser_install"
+ ser_daemon_add="nmbd smbd $ser_daemon_add "
+ if [ x$Samba_mediareadonly = x1 ]
+ then
+ smreadonly="no"
+ else
+ smreadonly="yes"
+ fi
+
+ if [ x$Samba_homereadonly = x1 ]
+ then
+ shreadonly="no"
+ else
+ shreadonly="yes"
+ fi
+
+ if [ ! -d ${BASE}/etc/samba ]
+ then
+ mkdir ${BASE}/etc/samba
+ fi
+
+ if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ]
+ then
+ install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf
+ else
+ sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \
+ -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf
+
+ if [ x$Samba_media = "x1" ]
+ then
+ echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf
+ sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media
+ fi
+
+ if [ x$Samba_home = "x1" ]
+ then
+ echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf
+ sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home
+
+ fi
+
+ fi
+else
+ ser_remove="samba $ser_remove"
+ ser_install="smbclient $ser_install"
+ ser_daemon_remove="smbd nmbd $ser_daemon_remove"
+fi
+
+
+if [ x$UseNFS = x1 ]
+then
+ ser_install="nfs-utils portmap $ser_install"
+ ser_daemon_add="nfsd nfslock portmap $ser_daemon_add"
+ sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports
+
+else
+ ser_remove="$ser_remove"
+ ser_daemon_remove="nfsd nfslock $ser_daemon_remove"
+fi
+
+if [ x$Runncidd = x1 ]
+then
+ ser_daemon_add="ncidd ncid $ser_daemon_add"
+ ser_install="ncid $ser_install"
+ else
+ ser_daemon_remove="ncidd ncid $ser_daemon_remove"
+ ser_remove="ncid $ser_remove"
+ fi
+
+#Setting the default, just to avoid the or statement..
+if [ x$UseHobbit = x ]
+then
+ UseHobbit=0
+fi
+
+if [ x$UseHobbit = x1 ]
+then
+ case $SystemType in
+ Standalone|Master_backend )
+ ser_daemon_add="hobbit $ser_daemon_add"
+ ser_install="hobbitserver $ser_install"
+ ;;
+
+ *) ser_daemon_add="hobbit-client $ser_daemon_add"
+ ser_install="hobbit-client $ser_install"
+ ;;
+ esac
+else
+ ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove"
+ ser_remove="hobbit-client hobbitserver $ser_remove"
+ rm -f /data/srv/httpd/htdocs/hobbit/index.html
+
+ fi
+
+
+
+}
+
+
+
+function setupsleep {
+if [ x$AutoShutdown = x1 ]
+then
+ cronshutdowntime=""
+ if [ x$Shutdowntime != x-1 ]
+ then
+ cronshutdowntime=$Shutdowntime
+ fi
+ if [ x$Shutdowntime2 != x-1 ]
+ then
+ if [ x$cronshutdowntime = x ]
+ then
+ cronshutdowntime=$Shutdowntime2
+ else
+ cronshutdowntime="${cronshutdowntime},${Shutdowntime2}"
+ fi
+ fi
+
+ sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv
+else
+ sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv
+fi
+
+}
+
+
+function setuppacman () {
+#setup link to httpd dir
+echo "Configuring pacman"
+ if [ ! x$1 = x ]
+ then
+ ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo
+ echo "creating the link for the pacman repo mirror"
+ fi
+
+ for i in mv-core mv-core-testing mv-extra mv-extra-testing
+ do
+ echo "[$i]" > ${BASE}/etc/pacman.d/$i
+ #add mirror if needed
+ if [ x$PKG_MIRROR = x1 ]
+ then
+ echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i
+ fi
+ #add user templates
+ USERTEMPLATES="/data/home/mythtv/templates"
+ if [ -f $USERTEMPLATES/sources/$i ]
+ then
+ echo "Adding user $i"
+ cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i
+ fi
+ cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i
+ echo "setting local mirror to $dbhost for $i "
+ done
+
+ #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg
+
+
+}
+
+
+function setupzipcode () {
+ if [ ! x$zipcode = x ]
+ then
+ ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode
+ fi
+}
+
+function process_nfsmap () {
+#first look for a local copy of nfsmap
+if [ $1 = noip ]
+then
+ if [ -f /data/home/mythtv/templates/nfsmap ]
+ then
+ NFSMAP="/data/home/mythtv/templates/nfsmap"
+ else
+ mv -f /tmp/nfsmap /tmp/nfsmap.old
+ wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap
+ if [ $? = 0 ]
+ then
+ NFSMAP="/tmp/nfsmap"
+ fi
+ fi
+else
+ mv -f /tmp/nfsmap /tmp/nfsmap.old
+ wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap
+ if [ $? = 0 ]
+ then
+ NFSMAP="/tmp/nfsmap"
+ fi
+fi
+
+ if [ -f $NFSMAP ]
+ then
+ #read in file
+ while read line
+ do
+ NFSserver=`echo "$line"|cut -d" " -f1`
+ NFSmount=`echo "$line"|cut -d" " -f2`
+ setupfstab $NFSserver $NFSmount
+ done <$NFSMAP
+ else
+ echo "couldn't find nfsmap"
+
+ fi
+}
+
+function setupcnfs () {
+ scrubnfs
+ if [ $HaveCentralNFS = "yes" ]
+ then
+ case x$NFSserver in
+ xfile:nfsmap )
+ process_nfsmap noip
+ ;;
+ *:nfsmap )
+ nfsmapip=`echo "$NFSserver" | cut -d: -f1 `
+ process_nfsmap $nfsmapip
+ ;;
+ *) setupfstab $NFSserver $NFSmount
+ esac
+
+ #if [ ! x"$NFSserver" = "xfile:nfsmap" ]
+ #then
+ # setupfstab $NFSserver $NFSmount
+ #else
+ # process_nfsmap
+ #fi
+ else
+ echo "fe_nfs"
+ #if no central nfs found, then use the mbe.
+ if [ $SystemType = "Frontend_only" ]
+ then
+ setupfstab ${dbhost}:/data/media /data/media
+ fi
+ fi
+
+}
+
+function setupbootsplash () {
+
+if [ x$Usebootsplash = x1 ]
+then
+ COMMAND="%s/^default.*0/default 1/g"
+else
+ COMMAND="%s/^default.*1/default 0/g"
+fi
+
+ex ${BASE}/boot/grub/menu.lst <<EOF
+:$COMMAND
+:wq
+EOF
+
+}
+
+function setuphobbitclient () {
+COMMAND="%s/^BBDISP=.*$/BBDISP=$dbhost/g"
+
+
+ex ${BASE}/data/srv/hobbit/client/etc/hobbitclient.cfg <<EOF
+:$COMMAND
+:wq
+EOF
+
+}
+
+function setupSyslog () {
+COMMAND="%s/^destination d_remote.*$/destination d_remote \{tcp\(\"${dbhost}\" port\(514\)\) \;\} \;/"
+ex ${BASE}/etc/syslog-ng.conf <<EOF
+:$COMMAND
+:wq
+EOF
+
+
+
+
+}
+
+function setupfuncminion () {
+COMMAND="%s/^certmaster.*$/certmaster = ${dbhost}/"
+ex ${BASE}/etc/func/minion.conf <<EOF
+:$COMMAND
+:wq
+EOF
+}
+
+function setupDNSMASQ(){
+if [ x$RunDHCP = x1 ]
+then
+ echo "DNSMASQ setup"
+
+#set default route to my GW
+COMMAND="%s/^dhcp-option=3.*$/dhcp-option=3,${route}/"
+ex ${BASE}/etc/dnsmasq.conf <<EOF
+:$COMMAND
+:wq
+EOF
+
+#setup dns to my ip
+COMMAND="%s/^dhcp-option=6.*$/dhcp-option=6,${ip}/"
+ex ${BASE}/etc/dnsmasq.conf <<EOF
+:$COMMAND
+:wq
+EOF
+
+
+#change nfsroot to my ip
+COMMAND="%s/nfsroot=.*:/nfsroot=${ip}:/"
+ex ${BASE}/data/srv/tftp/pxelinux.cfg/default <<EOF
+:$COMMAND
+:wq
+EOF
+
+#add 127.0.0.1 to /etc/resolv.conf
+ echo "search lan" > ${BASE}/etc/resolv.conf
+ echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
+ echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf
+fi
+
+#setup dongle.config
+COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /"
+ex ${BASE}/data/srv/tftp/dongle.bin.config <<EOF
+:$COMMAND
+:wq
+EOF
+
+
+
+#setup dongle.config
+
+}
+
+function reloadfe(){
+ PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'`
+ /usr/bin/backend_control.sh clearcache behost $dbhost
+ if [ x$RESTART_LCD = xtrue ]
+ then
+ killall -9 mythlcdserver
+ fi
+ kill -s USR1 $PID
+
+}
+
+
+function setup_db (){
+
+ install="mysql avahli"
+ daemon_add="mysql"
+ packages
+ daemons
+status=1
+mysqlstatus=1
+while [ ! $status = 0 ]
+do
+ sv stop mysql
+ sleep 1
+ sv start mysql
+ mysqlstatus=$?
+ if [ $mysqlstatus = 0 ]
+ then
+ mysql -e "show databases;"
+ showstatus=$?
+ if [ $showstatus = 0 ]
+ then
+ pacman --noconfirm -R mythdb-initial
+ pacman --noconfirm -S mythdb-initial
+ $MV_ROOT/bin/restore_default_settings.sh -c load
+ if [ $SystemType = "Master_backend" ]
+ then
+ $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
+ fi
+ #update database to allow user jobs on this host.
+ $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
+ $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
+ if [ -d /data/srv/mysql/mythconverg ]
+ then
+ pacman --noconfirm -R webcalendar
+ pacman --noconfirm --nodeps -S webcalendar
+ status=0
+ fi
+ fi
+ fi
+done
+}
+
+
+#----------------------------------------------------MAIN PROGRAM-------------------------------------------
+#misc,sleep,hostype,advanced,audio
+eval LAST=\$$#
+LIST=`echo $LAST | tr , " " `
+
+hosttypechange="false"
+
+
+for i in $LIST
+ do
+ echo $i
+ case $i in
+ misc) showmisc="true"
+ ;;
+ sleep) showsleep="true"
+ ;;
+ hostype) showhost="true"
+ showX="true"
+ ;;
+ hostypec) hosttypechange="true"
+ ;;
+ advanced) showadvanced="true"
+ #showhost="true"
+ ;;
+ audio) showaudio="true"
+ ;;
+ network) shownetwork="true"
+ ;;
+ advancedX) showX="true"
+ ;;
+ restartfe) killall -9 mythfrontend
+ killall -9 mythwelcome
+ exit 0
+ ;;
+ reloadfe) reloadfe
+ ;;
+
+ this_is_install) MV_NEW_INSTALL="true"
+ ;;
+
+ esac
+ done
+
+if [ x$MV_NEW_INSTALL = xtrue ]
+then
+ hosttypechange="false"
+fi
+
+
+
+# exit 1
+
+#network
+if [ x"$shownetwork" = xtrue ]
+then
+ OLDHOSTNAME=`hostname`
+ NEWHOSTNAME=$hostname
+ if [ ! $OLDHOSTNAME = $NEWHOSTNAME ]
+ then
+
+ ${MV_ROOT}/bin/restore_default_settings.sh -cuhostname -o -h$OLDHOSTNAME
+ RESTART_FE="true"
+ hostname $NEWHOSTNAME
+ if [ $SystemType != "Frontend_only" ]
+ then
+ sv restart mythbackend
+ fi
+
+ fi
+
+ setup_network
+ CMDLINE=$(cat /proc/cmdline)
+ echo $CMDLINE |grep -q netboot
+ NETBOOT=$?
+ if [ x$NETBOOT = x1 ]
+ then
+ echo "loading network"
+ ${BASE}/etc/net/scripts/network.init reload
+ else
+ echo "netboot, will not start network"
+ fi
+fi
+
+
+if [ x$showhost = "xtrue" ]
+then
+case $SystemType in
+ Standalone)
+ setupntp 1
+ services
+ if [ x$hosttypechange = "xtrue" ]
+ then
+ setup_db
+ fi
+ if [ -f ${BASE}/etc/avahi/services/mysql.service ]
+ then
+ rm -f ${BASE}/etc/avahi/services/mysql.service
+ sudo sv restart avahi
+ fi
+
+ install="mysql mythdb-initial avahli portmap local-website $ser_install"
+
+
+ remove="none $ser_remove"
+
+ daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add"
+ daemon_remove="none $ser_daemon_remove"
+
+ ;;
+ Master_backend)
+ setupntp 1
+ services
+
+ if [ ! -f ${BASE}/etc/avahi/services/mysql.service ]
+ then
+ mkdir ${BASE}/etc/avahi/services
+ cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service
+ sudo sv restart avahi
+ fi
+
+ install="mysql mythdb-initial avahi portmap local-website myth2ipod mythtv-status $ser_install "
+ remove="$ser_remove"
+
+ daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add"
+ daemon_remove="$ser_daemon_remove"
+ ;;
+ Slave_backend)
+ setupntp 0
+ services
+ if [ x$hosttypechange = "xtrue" ]
+ then
+ setup_db
+ fi
+ if [ -f ${BASE}/etc/avahi/services/mysql.service ]
+ then
+ rm -f ${BASE}/etc/avahi/services/mysql.service
+ sudo sv restart avahi
+ fi
+
+ #cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service
+ install="mysql avahi local-website $ser_install "
+ remove=" $ser_remove"
+
+ daemon_add="mythbackend avahi portmap lighttpd $ser_daemon_add"
+ daemon_remove="$ser_daemon_remove"
+ ;;
+ Frontend_only)
+ #Add values for services
+ setupntp 0
+ services
+ if [ -f ${BASE}/etc/avahi/services/mysql.service ]
+ then
+ rm -f ${BASE}/etc/avahi/services/mysql.service
+ sudo sv restart avahi
+ fi
+
+ install="libmysqlclient mysql-clients portmap avahi local-website $ser_install"
+ remove="mysql mythweb$postfix $ser_remove"
+
+ daemon_add="avahi portmap lighttpd $ser_daemon_add "
+ daemon_remove="mysql mythbackend $ser_daemon_remove"
+ ;;
+
+
+esac
+#setupSyslog
+
+fi
+
+#apply these to ALL types
+
+
+
+
+#systemtype
+
+if [ x$showhost = "xtrue" ]
+then
+ setupmysqlnetwork
+ setupmysql
+ setupremote
+ #grab the new dbhost key
+ #/usr/bin/grabkey.py
+fi
+
+#audio
+
+if [ x$showaudio = "xtrue" ]
+then
+ #setupsoundtype
+ if [ ! x$Audiotype = xtinker ]
+ then
+ ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice
+ fi
+fi
+
+#should always run
+packages
+
+#misc
+
+if [ x$showmisc = "xtrue" ]
+then
+ setupzipcode
+ settimezone
+ setupcnfs
+fi
+
+#sleep
+if [ x$showsleep = "xtrue" ]
+then
+ setupsleep
+fi
+
+if [ x$showX = "xtrue" ]
+then
+ ${MV_ROOT}/bin/xconfig.sh
+fi
+
+#advanced
+if [ x$showadvanced = "xtrue" ]
+then
+ if [ ! x$showhost = "xtrue" ]
+ then
+ services
+ install="none $ser_install"
+ remove="none $ser_remove"
+ daemon_add=" none $ser_daemon_add"
+ daemon_remove="none $ser_daemon_remove"
+ packages
+
+
+ if [ x$SystemType = xMaster_backend ]
+ then
+ setuppacman link
+ else
+ setuppacman
+ fi
+ fi
+ setupncidclient
+ setupnciddaemon
+ setupbootsplash
+ setuphobbitclient
+ setupreceiver
+ setupevrouter
+ setupblaster
+ setupLCD
+ setupDNSMASQ
+
+fi
+
+
+
+daemons
+#add check for lcd, and restart if needed.
+
+if [ x$RESTART_FE = xtrue ]
+then
+ reloadfe
+fi
+
+
+
+
+
+case $SystemType in
+ Standalone) smoltsystem=6
+ MVRELEASE="$MVRELEASE (Standalone)"
+ ;;
+ Master_backend)
+ if [ x$RunFrontend = x1 ]
+ then
+ smoltsystem=2
+ MVRELEASE="$MVRELEASE (MBE with Frontend)"
+ else
+ smoltsystem=1
+ MVRELEASE="$MVRELEASE (MBE)"
+ fi
+ ;;
+ Slave_backend)
+ if [ x$RunFrontend = x1 ]
+ then
+ smoltsystem=5
+ MVRELEASE="$MVRELEASE (SLAVE with Frontend)"
+ else
+ smoltsystem=5
+ MVRELEASE="$MVRELEASE (SLAVE)"
+ fi
+ ;;
+ Frontend_only)
+ smoltsystem=3
+ MVRELEASE="$MVRELEASE ( Frontend only)"
+ ;;
+esac
+echo $MVRELEASE > /etc/os_myth_release
+echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info
+echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info
+
diff --git a/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf
new file mode 100644
index 0000000..d49fbf6
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=shuttleVFD
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as. LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+# specific setup! Otherwise LCDd won't be able to find
+# the driver modules and will thus not be able to
+# function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50 # Brightness (in %) if applicable
+Contrast=50 # Contrast (in %) if applicable
+Backlight=no # Backlight if applicable
+UpsideDown=no # flip image upside down
+Invert=no # invert light/dark pixels
+ShowDebugFrame=no # turns on/off 1 pixel thick debugging
+ # border whithin the usable text area,
+ # for setting up TextResolution and
+ # MinFontFaceSize (if using FT2);
+ShowBigBorder=no # border around the unused area
+ShowThinBorder=yes # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+# KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+# KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname Function
+# Normal context Menu context
+# ------- -------------- ------------
+# PauseKey Pause/Continue Enter/select
+# BackKey Back(Go to previous screen) Up/Left
+# ForwardKey Forward(Go to next screen) Down/Right
+# MainMenuKey Open main menu Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+# as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+# is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's. ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf
new file mode 100644
index 0000000..2596c25
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=imon
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as. LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+# specific setup! Otherwise LCDd won't be able to find
+# the driver modules and will thus not be able to
+# function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50 # Brightness (in %) if applicable
+Contrast=50 # Contrast (in %) if applicable
+Backlight=no # Backlight if applicable
+UpsideDown=no # flip image upside down
+Invert=no # invert light/dark pixels
+ShowDebugFrame=no # turns on/off 1 pixel thick debugging
+ # border whithin the usable text area,
+ # for setting up TextResolution and
+ # MinFontFaceSize (if using FT2);
+ShowBigBorder=no # border around the unused area
+ShowThinBorder=yes # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+# KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+# KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname Function
+# Normal context Menu context
+# ------- -------------- ------------
+# PauseKey Pause/Continue Enter/select
+# BackKey Back(Go to previous screen) Up/Left
+# ForwardKey Forward(Go to next screen) Down/Right
+# MainMenuKey Open main menu Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+# as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+# is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's. ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules
new file mode 100644
index 0000000..cd576c3
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules
@@ -0,0 +1 @@
+lirc_imon #LCD
diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf
new file mode 100644
index 0000000..2596c25
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf
@@ -0,0 +1,869 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
+# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
+# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
+# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
+# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=imon
+#Driver=curses
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+#ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as. LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+# specific setup! Otherwise LCDd won't be able to find
+# the driver modules and will thus not be able to
+# function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+# Set the initial off-brightness [default: 0; legal: 0 - 255]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+
+## optional:
+Brightness=50 # Brightness (in %) if applicable
+Contrast=50 # Contrast (in %) if applicable
+Backlight=no # Backlight if applicable
+UpsideDown=no # flip image upside down
+Invert=no # invert light/dark pixels
+ShowDebugFrame=no # turns on/off 1 pixel thick debugging
+ # border whithin the usable text area,
+ # for setting up TextResolution and
+ # MinFontFaceSize (if using FT2);
+ShowBigBorder=no # border around the unused area
+ShowThinBorder=yes # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+# KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+# KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname Function
+# Normal context Menu context
+# ------- -------------- ------------
+# PauseKey Pause/Continue Enter/select
+# BackKey Back(Go to previous screen) Up/Left
+# ForwardKey Forward(Go to next screen) Down/Right
+# MainMenuKey Open main menu Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+# NOTE: The driver will ignore this if the display is a vfd or vkd
+# as they crash if the backlight is turned off
+Backlight=yes
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+# is a vfd or vkd as they don't have this feature
+Contrast=800
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# The following table translates from MtxOrb key letters to logical key namess.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
+# Note: G321D is the only one that is tested currently.
+Type=G321D
+
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's. ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use
+Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
+
+# EOF
diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf
new file mode 100644
index 0000000..ce64936
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf
@@ -0,0 +1,38 @@
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007
+#
+# contributed by
+#
+# brand: /tmp/out
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name Antec_fusion_silver_v1
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ post_data_bits 16
+ post_data 0xFF
+ gap 131985
+ min_repeat 6
+ toggle_bit 0
+
+
+ begin codes
+ CW 0x0001
+ CCW 0x0100
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc
new file mode 100644
index 0000000..7a39704
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc
@@ -0,0 +1,15 @@
+begin
+ remote = Antec_fusion_silver_v1
+ prog = mythtv
+ button = CW
+ repeat = 1
+ config = ]
+end
+
+begin
+ remote = Antec_fusion_silver_v1
+ prog = mythtv
+ button = CCW
+ repeat = 1
+ config = [
+end
diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules
new file mode 100644
index 0000000..cd576c3
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules
@@ -0,0 +1 @@
+lirc_imon #LCD
diff --git a/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf
new file mode 100644
index 0000000..5b37bd7
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf
@@ -0,0 +1,957 @@
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifiying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving af File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65,
+# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior,
+# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x,
+# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
+# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd
+Driver=xosd
+
+# Tells the driver to bind to the given interface
+Bind=127.0.0.1
+
+# Listen on this specified port; defaults to 13666.
+Port=13666
+
+# Sets the reporting level; defaults to 2 (warnings and errors only).
+ReportLevel=3
+
+# Should we report to syslog instead of stderr ? Default: no
+#ReportToSyslog=yes
+
+# Sets the default time in seconds to displays a screen.
+WaitTime=5
+
+# User to run as. LCDd will drop its root priviledges,
+# if any, and run as this user instead.
+User=nobody
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active.
+#ServerScreen=no
+
+# The server will stay in the foreground if set to true.
+#Foreground=no
+
+# Where can we find the driver modules ?
+# IMPORTANT: Make sure to change this setting to reflect your
+# specific setup! Otherwise LCDd won't be able to find
+# the driver modules and will thus not be able to
+# function properly.
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/lcdproc/
+
+# GoodBye message: each entry represents a display line; default: builtin
+#GoodBye="Thanks for using"
+#GoodBye=" LCDproc!"
+
+# The "...Key=" lines define what the server does with keypresses that
+# don't go to any client.
+# These are the defaults:
+ToggleRotateKey=Enter
+PrevScreenKey=Left
+NextScreenKey=Right
+#ScrollUpKey=Up
+#ScrollDownKey=Down
+
+# If you have only 4 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+#NextScreenKey=Down
+
+# If you have only 3 keys, you can choose to use this:
+#ToggleRotateKey=Enter
+#PrevScreenKey=Up
+
+
+
+## The menu section. The menu is an internal LCDproc client. ##
+[menu]
+# You can configure what keys the menu should use. Note that the MenuKey
+# will be reserved exclusively, the others work in shared mode.
+
+# The following works excellent with 4 keys or more.
+MenuKey=Escape
+EnterKey=Enter
+UpKey=Up
+DownKey=Down
+# If you have 6 keys you may define these as well
+#LeftKey=Left
+#RightKey=Right
+
+# If you have only 3 keys, you could use something like this:
+#MenuKey=Escape
+#EnterKey=Enter
+#DownKey=Down
+
+
+
+### Driver sections are below this line, in alphabetical order ###
+
+
+## EMAC BayRAD driver ##
+[bayrad]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
+Speed=9600
+
+
+
+## CrystalFontz driver (for CF632 & CF634) ##
+[CFontz]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD size [default: 20x4]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
+Speed=9600
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+
+
+## CrystalFontz633 driver (for CF633 only) ##
+[CFontz633]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+# Select the LCD type (size) [default: 16x2]
+Size=16x2
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=19200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
+[CFontzPacket]
+
+# Select the LCD model [default: 633; legal: 631, 633, 635]
+Model=635
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
+Size=20x4
+# Set the initial contrast [default: 560; legal: 0 - 1000]
+Contrast=350
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=115200
+# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
+# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
+#NewFirmware=no
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# I want to reboot the LCD to make sure we start from a known state
+Reboot=yes
+
+
+
+## Curses driver ##
+[curses]
+
+# color settings
+# foreground color [default: blue]
+Foreground=blue
+# background color when "backlight" is off [default: cyan]
+Background=cyan
+# background color when "backlight" is on [default: red]
+Backlight=red
+
+# display size [default: 20x4]
+Size=20x4
+
+# What position (X,Y) to start the left top corner at...
+# Default: (7,7)
+TopLeftX=7
+TopLeftY=7
+
+# use ASC symbols for icons & bars [default: no; legal, yes, no]
+UseACS=no
+
+
+
+## Cwlinux driver ##
+[CwLnx]
+
+# Select the LCD model [default: 12232; legal: 12232, 1602]
+Model=12232
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
+Size=20x4
+
+# Set the communication speed [default: 19200; legal: 9600, 19200]
+Speed=19200
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+# normally you shouldn't need this
+Reboot=no
+
+# If you have a keypad connected. Keypad layout is currently not
+# configureable from the config file.
+Keypad=yes
+
+# If you have a non-standard keypad you can associate any keystrings to keys.
+# There are 6 input keys in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following is the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+# keypad_test_mode permits to test keypad assignement
+# Default value is no
+#keypad_test_mode=yes
+
+
+
+## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
+[ea65]
+
+# Device is fixed /dev/ttyS1
+# Width and Height are fixed 9x1
+
+# As the VFD is self luminescent we don't have a backlight
+# But we can use the backlight functions to control the front LEDs
+# Brightness 0 to 299 -> LEDs off
+# Brightness 300 to 699 -> LEDs half bright
+# Brightness 700 to 1000 -> LEDs full bright
+Brightness=500
+# OffBrightness is the the value used for the 'backlight off' state
+OffBrightness=0
+
+
+
+## EyeboxOne driver ##
+[EyeboxOne]
+
+# Select the output device to use [default: /dev/ttyS1]
+#Device=/dev/cua01
+Device=/dev/ttyS1
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Switch on the backlight? [default: yes]
+Backlight=yes
+
+# Switch on the cursor? [default: no]
+Cursor=no
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# Enter Key is a \r character, so it's hardcoded in the driver
+LeftKey=D
+RightKey=C
+UpKey=A
+DownKey=B
+EscapeKey=P
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## g15 driver for Logitech G15 Keyboard LCDs ##
+[g15]
+
+# Display size (currently unused)
+size=20x5
+
+## glcdlib meta driver for graphical LCDs ##
+[glcdlib]
+
+## mandatory:
+
+# which graphical display supported by graphlcd-base to use [default: image]
+# (see /etc/graphlcd.conf for possible drivers)
+Driver=noritake800
+
+# no=use graphlcd bitmap fonts (they have only one size / font file)
+# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
+UseFT2=yes
+
+# text resolution in fixed width characters [default: 16x4]
+# (if it won't fit according to available physical pixel resolutioni
+# and the minimum available font face size in pixels, then
+# 'DebugBorder' will automatically be turned on)
+TextResolution=20x4
+
+# path to font file to use
+FontFile=/usr/share/fonts/corefonts/courbd.ttf
+
+## these only apply if UseFT2=yes:
+
+# character encoding to use
+CharEncoding=iso8859-2
+
+# minumum size in pixels in which fonts should be rendered
+MinFontFaceSize=7x12
+
+## optional:
+Brightness=50 # Brightness (in %) if applicable
+Contrast=50 # Contrast (in %) if applicable
+Backlight=no # Backlight if applicable
+UpsideDown=no # flip image upside down
+Invert=no # invert light/dark pixels
+ShowDebugFrame=no # turns on/off 1 pixel thick debugging
+ # border whithin the usable text area,
+ # for setting up TextResolution and
+ # MinFontFaceSize (if using FT2);
+ShowBigBorder=no # border around the unused area
+ShowThinBorder=yes # border around the unused area
+PixelShiftX=0
+PixelShiftY=2
+
+
+
+## Matrix Orbital GLK driver ##
+[glk]
+
+# select the serial device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# set the initial contrast value [default: 560; legal: 0 - 1000]
+Contrast=560
+
+# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
+Speed=19200
+
+
+
+## Hitachi HD44780 driver ##
+[hd44780]
+
+# Select what type of connection. See documentation for types.
+ConnectionType=4bit
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device of the serial interface (default is /dev/lcd)
+Device=/dev/ttyS0
+
+# Bitrate of the serial port (0 for interface default)
+Speed=0
+
+# If you have a keypad connected.
+# You may also need to configure the keypad layout further on in this file.
+Keypad=no
+
+# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
+Contrast=0
+
+# If you have a switchable backlight.
+Backlight=no
+
+# If you have the additional output port ("bargraph") and you want to
+# be able to control it with the lcdproc OUTPUT command
+OutputPort=no
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+# Specifies the size of the LCD.
+# In case of multiple combined displays, this should be the total size.
+Size=20x4
+
+# For multiple combined displays: how many lines does each display have.
+# Vspan=2,2 means both displays have 2 lines.
+#vspan=2,2
+
+# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
+# set this flag to get into extended mode (4-line linear).
+# This flag is NOT the old obsolete Extended option.
+#ExtendedMode=yes
+
+# Character map to to map ISO-8859-1 to the LCD's character set
+# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ]
+Charmap=hd44780_default
+
+# If your display is slow and cannot keep up with the flow of data from
+# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
+# to increase the delays. Default: 1.
+#DelayMult=2
+
+# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
+# is still alive. When set to a value bigger then null the character in the
+# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
+#KeepAliveDisplay=0
+
+# If you experience occasional garbage on your display you can use this
+# option as workaround. If set to a value bigger than null it forces a
+# full screen refresh <RefreshDiplay> seconds. Default: 0.
+#RefreshDisplay=5
+
+# You can reduce the inserted delays by setting this to false.
+# On fast PCs it is possible your LCD does not respond correctly.
+# Default: true.
+DelayBus=true
+
+# If you have a keypad you can assign keystrings to the keys.
+# See documentation for used terms and how to wire it.
+# For example to give directly connected key 4 the string "Enter", use:
+# KeyDirect_4=Enter
+# For matrix keys use the X and Y coordinates of the key:
+# KeyMatrix_1_3=Enter
+KeyMatrix_4_1=Enter
+KeyMatrix_4_2=Up
+KeyMatrix_4_3=Down
+KeyMatrix_4_4=Escape
+
+
+
+## ICP A106 driver ##
+[icp_a106]
+Device=/dev/ttyS1
+
+
+
+## Code Mercenaries IO-Warrior driver ##
+[IOWarrior]
+
+# display dimensions
+Size=20x4
+
+# serial number [exactly as listed by usbview]
+# (if not given, the 1st IOWarrior found gets used)
+#SerialNumber=00000674
+
+# Specifies if the last line is pixel addressable or it controls an
+# underline effect. [default: true (= pixel addressable); legal: yes, no]
+#Lastline=true
+
+
+
+## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
+[imon]
+
+# select the device to use
+Device=/dev/lcd0
+
+# display dimensions
+Size=16x2
+
+
+
+## IrMan driver ##
+[IrMan]
+#if in trouble with IrMan, try Lirc emulator for IrMan
+
+# Select the input device to use
+#Device=/dev/irman
+
+# Select the configuration file to use
+#Config=/etc/irman.cfg
+
+
+
+## Joystick driver ##
+[joy]
+
+# Select the input device to use [default: /dev/js0]
+Device=/dev/js0
+
+# set the axis map
+Map_Axis1neg=Left
+Map_Axis1pos=Right
+Map_Axis2neg=Up
+Map_Axis2pos=Down
+
+# set the button map
+Map_Button1=Enter
+Map_Button2=Escape
+
+
+
+## LB216 driver ##
+[lb216]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Set the communication speed [default: 9600; legal: 2400, 9600]
+Speed=9600
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## LCDM001 driver ##
+[lcdm001]
+
+Device=/dev/ttyS1
+
+# keypad settings
+# Keyname Function
+# Normal context Menu context
+# ------- -------------- ------------
+# PauseKey Pause/Continue Enter/select
+# BackKey Back(Go to previous screen) Up/Left
+# ForwardKey Forward(Go to next screen) Down/Right
+# MainMenuKey Open main menu Exit/Cancel
+PauseKey=LeftKey
+BackKey=UpKey
+ForwardKey=DownKey
+MainMenuKey=RightKey
+
+# You can rearrange the settings here.
+# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
+
+
+
+## HNE LCTerm driver ##
+[lcterm]
+Device=/dev/ttyS1
+Size=16x2
+
+
+
+## LIRC input driver ##
+[lirc]
+
+# Specify an alternative location of the lircrc file [default: ~/.lircrc]
+#lircrc=/etc/lircrc.lcdproc
+
+# Must be the same as in your lircrc
+#prog=lcdd
+
+
+
+##The driver for the VFD of the Medion MD8800 PC ##
+[MD8800]
+# device to use [default: /dev/ttyS1]
+#Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=50
+
+
+
+## MSI MS-6931 driver for displays in 1HU servers ##
+[ms6931]
+
+# device to use [default: /dev/ttyS1]
+Device=/dev/ttyS1
+
+# display size [default: 16x2]
+#Size=16x2
+
+
+
+## MTC-S16209x driver ##
+[mtc_s16209x]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the initial brightness [default: 255; legal: 0 - 255]
+Brightness=255
+
+# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
+Reboot=no
+
+
+
+## Matrix Orbital driver ##
+[MtxOrb]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Set the display size [default: 20x4]
+Size=20x4
+
+# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
+Type=lkd
+
+# Set the initial contrast [default: 480]
+# NOTE: The driver will ignore this if the display
+# is a vfd or vkd as they don't have this feature
+Contrast=480
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=0
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
+Speed=19200
+
+# The following table translates from MtxOrb key letters to logical key names.
+# By default no keys are mapped, meaning the keypad is not used at all.
+#KeyMap_A=Left
+#KeyMap_B=Right
+#KeyMap_C=Up
+#KeyMap_D=Down
+#KeyMap_E=Enter
+#KeyMap_F=Escape
+# See the [menu] section for an explanation of the key mappings
+
+# You can find out which key of your display sends which
+# character by setting keypad_test_mode to yes and running
+# LCDd. LCDd will output all characters it receives.
+# Afterwards you can modify the settings above and set
+# keypad_set_mode to no again.
+keypad_test_mode=no
+
+
+
+## Noritake VFD driver ##
+[NoritakeVFD]
+# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
+Device=/dev/ttyS0
+
+# Specifies the size of the LCD.
+Size=20x4
+
+# set the brightness
+Brightness=255
+
+# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# re-initialize VFD ?
+#Reboot=yes
+
+
+
+## Mini-box.com picoLCD (usblcd) driver ##
+[picolcd]
+# This is for the Mini-Box.com usblcd device that ships with the M300. It can
+# also be purchased separately but this driver has only been tested on the M300
+# setup.
+
+# KeyTimeout is the time that LCDd spends waiting for a key press before cycling
+# through other duties. Higher values make LCDd use less CPU time and make
+# key presses more detectable. Lower values make LCDd more responsive but a
+# little prone to missing key presses. 500 (.5 second) is the default and a
+# balanced value.
+KeyTimeout=500
+
+# Contrast: [default: 1000; legal: 0 - 1000]
+Contrast=1000
+
+# Light the keys? i[default: on; legal: on, off]
+Keylights=on
+
+# If Keylights is on, the you can unlight specific keys below:
+# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys.
+# There is no LED for the +/- keys. This is a handy way to indicate to users
+# which keys are disabled. [default: on; legal: on, off]
+Key0Light=on
+Key1Light=on
+Key2Light=on
+Key3Light=on
+Key4Light=on
+Key5Light=on
+
+
+
+## Pyramid LCD driver ##
+[pyramid]
+
+# device to connect to [default: /dev/lcd]
+Device=/dev/ttyUSB0
+
+
+
+## Seiko Epson 1330 driver ##
+[sed1330]
+
+# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
+# Note: Currently only tested with G321D & SP14Q002.
+Type=G321D
+
+# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
+CellSize=6x10
+
+# Select what type of connection [legal: classic, bitshaker; default: classic]
+ConnectionType=classic
+
+
+## Seiko Epson 1520 driver ##
+[sed1520]
+
+# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+
+
+## serial POS display driver ##
+[serialPOS]
+
+# Device to use in serial modea [default: /dev/lcd]
+Device=/dev/lcd
+
+# Specifies the size of the display in characters. [default: 16x2]
+Size=16x2
+
+# Set the communication protocol to use with the POS display.
+# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
+Type=AEDEX
+
+# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
+Speed=9600
+
+
+
+## Serial VFD driver ##
+## Drives various (see below) serial 5x7dot VFD's. ##
+[serialVFD]
+
+# Specifies the displaytype.[default: 0]
+# 0 NEC (FIPC8367 based) VFDs.
+# 1 KD Rev 2.1.
+# 2 Noritake VFDs (*).
+# 3 Futaba VFDs
+# (* most should work, not testet yet.)
+Type=0
+
+# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
+use_parallel=no
+
+# Number of Custom-Characters [default: displaytype dependent]
+#Custom-Characters=0
+
+# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
+Port=0x378
+
+# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
+Device=/dev/ttyS1
+
+# Specifies the size of the VFD.
+Size=20x2
+
+# Set the initial brightness [default: 1000; legal: 0 - 1000]
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+Brightness=1000
+# Set the initial off-brightness [default: 0; legal: 0 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+# (4 steps 0-250, 251-500, 501-750, 751-1000)
+OffBrightness=0
+
+# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
+Speed=9600
+
+# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
+#ISO_8859_1=yes
+
+
+
+## stv5730 driver ##
+[stv5730]
+
+# Port the device is connected to [default: 0x378]
+Port=0x378
+
+
+
+## SVGAlib driver ##
+[svga]
+
+# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
+#Mode=G640x480x256
+
+# set display size [default: 20x4]
+Size=20x4
+
+# Set the initial contrast [default: 500; legal: 0 - 1000]
+# Can be set but does not change anything internally
+Contrast=500
+
+# Set the initial brightness [default: 1000; legal: 1 - 1000]
+Brightness=1000
+
+# Set the initial off-brightness [default: 500; legal: 1 - 1000]
+# This value is used when the display is normally
+# switched off in case LCDd is inactive
+OffBrightness=500
+
+
+
+## Text driver ##
+[text]
+# Set the display size [default: 20x4]
+Size=20x4
+
+
+
+## Toshiba T6963 driver ##
+[t6963]
+
+# set display size [default: 20x6]
+Size=20x6
+
+# port to use [default: 0x378; legal: 0x200 - 0x400]
+Port=0x378
+
+# Is ECP mode on? [default: yes; legal: yes, no]
+#ECPlpt=yes
+
+# Use graphics? [default: no; legal: yes, no]
+#graphic=no
+
+
+
+## Tyan Barebones LCD driver (GS10 & GS12 series) ##
+[tyan]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 9600; legal: 4800, 9600]
+Speed=9600
+
+# set display size [default: 16x2]
+Size=16x2
+
+
+
+## ELV ula200 driver ##
+[ula200]
+
+# Select the LCD size [default: 20x4]
+Size=20x4
+
+# If you have a non standard keypad you can associate any keystrings to keys.
+# There are 6 input key in the CwLnx hardware that generate characters
+# from 'A' to 'F'.
+#
+# The following it the built-in default mapping hardcoded in the driver.
+# You can leave those unchanged if you have a standard keypad.
+# You can change it if you want to report other keystrings or have a non
+# standard keypad.
+# KeyMap_A=Up
+# KeyMap_B=Down
+# KeyMap_C=Left
+# KeyMap_D=Right
+# KeyMap_E=Enter
+# KeyMap_F=Escape
+
+
+
+## Wirz SLI LCD driver ##
+[sli]
+
+# Select the output device to use [default: /dev/lcd]
+Device=/dev/lcd
+
+# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
+Speed=19200
+
+
+
+## OnScreen Display using libxosd ##
+[xosd]
+
+# set display size [default: 20x4]
+Size=20x4
+
+# font to use, in XLFD format, as given by "xfontsel"
+Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-*
+
+
+# EOF
diff --git a/abs/core-testing/LinHES-config/templates/cc.orig.sh b/abs/core-testing/LinHES-config/templates/cc.orig.sh
new file mode 100755
index 0000000..d8fd2dc
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/cc.orig.sh
@@ -0,0 +1,35 @@
+#!/usr/bin/perl
+# rwraithr added segment for 4 digit channels
+# make sure to set this string to
+# the corresponding remote in /etc/remoted.conf
+#$remote_name = "RC-u43c-1h";
+$remote_name = "$REMOTE_NAME";
+
+sub change_channel {
+ my($channel_digit) = @_;
+ system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit");
+ sleep .5;
+}
+
+$channel=$ARGV[0];
+sleep 1;
+if (length($channel) > 3) {
+ change_channel(substr($channel,0,1));
+ change_channel(substr($channel,1,1));
+ change_channel(substr($channel,2,1));
+ change_channel(substr($channel,3,1));
+} elsif (length($channel) > 2) {
+ change_channel(substr($channel,0,1));
+ change_channel(substr($channel,1,1));
+ change_channel(substr($channel,2,1));
+} elsif (length($channel) > 1) {
+ change_channel(substr($channel,0,1));
+ change_channel(substr($channel,1,1));
+} else {
+ change_channel(substr($channel,0,1));
+}
+system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT");
+
+#system ("sleep 2");
+#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2");
+#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2");
diff --git a/abs/core-testing/LinHES-config/templates/cc.sh b/abs/core-testing/LinHES-config/templates/cc.sh
new file mode 100755
index 0000000..0cce308
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/cc.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+/usr/local/bin/cc.orig.sh $@ &
+/usr/local/bin/cc_vol.sh &
+
+
diff --git a/abs/core-testing/LinHES-config/templates/cc_vol.sh b/abs/core-testing/LinHES-config/templates/cc_vol.sh
new file mode 100755
index 0000000..819008d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/cc_vol.sh
@@ -0,0 +1,5 @@
+#!/bin/bash
+sleep 2
+/usr/local/bin/ivtvctl -p 2 -d /dev/video2
+/usr/local/bin/ivtvctl -p 1 -d /dev/video2
+
diff --git a/abs/core-testing/LinHES-config/templates/change_chan.sh b/abs/core-testing/LinHES-config/templates/change_chan.sh
new file mode 100755
index 0000000..5ad8765
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/change_chan.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+REMOTE_NAME=SA3250
+cmd="$1"
+
+case $cmd in
+ [0-9]*)
+ for digit in $(echo $1 | sed -e 's/./& /g'); do
+ irsend SEND_ONCE $REMOTE_NAME $digit
+ sleep 0.3
+ # If things work OK with sleep 1, try this for faster channel changes:
+ # sleep 0.3
+ done
+ ;;
+
+ *)
+ irsend SEND_ONCE $REMOTE_NAME $cmd
+ ;;
+ esac
+# /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/LinHES-config/templates/cron.template b/abs/core-testing/LinHES-config/templates/cron.template
new file mode 100644
index 0000000..3fcea10
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/cron.template
@@ -0,0 +1,4 @@
+# <minute> <hour> <day> <month> <dow> <command>
+
+
+00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address
new file mode 100644
index 0000000..1df28d2
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address
@@ -0,0 +1,2 @@
+192.168.1.158/24
+
diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route
new file mode 100644
index 0000000..373a4d1
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route
@@ -0,0 +1,2 @@
+default via 192.168.1.1
+
diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig
new file mode 100644
index 0000000..b1f14e0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig
@@ -0,0 +1,2 @@
+essid home_lan
+#key ababababab
diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/options b/abs/core-testing/LinHES-config/templates/etcnet/eth/options
new file mode 100644
index 0000000..929da58
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/options
@@ -0,0 +1,7 @@
+# If you want to change current interface name, edit /etc/net/iftab,
+# rename current directory and uncomment this line:
+TYPE=eth
+DISABLED=no
+BOOTPROTO=dhcp
+ONBOOT=yes
+CONFIG_WIRELESS=no
diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4
new file mode 100644
index 0000000..e69de29
diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8
new file mode 100644
index 0000000..e69de29
diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full
new file mode 100644
index 0000000..e69de29
diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac
new file mode 100644
index 0000000..0e3a708
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac
@@ -0,0 +1,3 @@
+"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh"
+"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject"
+
diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid
new file mode 100644
index 0000000..7cb2e34
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid
@@ -0,0 +1,3 @@
+"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh"
+"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject"
+
diff --git a/abs/core-testing/LinHES-config/templates/exports.template b/abs/core-testing/LinHES-config/templates/exports.template
new file mode 100644
index 0000000..b946287
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/exports.template
@@ -0,0 +1,8 @@
+# /etc/exports
+#
+# See exports(5) for a description.
+
+# use exportfs -arv to reread
+/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
+/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
+
diff --git a/abs/core-testing/LinHES-config/templates/fstab.conf.template b/abs/core-testing/LinHES-config/templates/fstab.conf.template
new file mode 100755
index 0000000..d27bcd9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/fstab.conf.template
@@ -0,0 +1,16 @@
+#
+# /etc/fstab: static file system information
+#
+# <file system> <dir> <type> <options> <dump> <pass>
+none /dev/pts devpts defaults 0 0
+none /dev/shm tmpfs defaults 0 0
+
+/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
+/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
+/dev/fd0 /mnt/fl vfat user,noauto 0 0
+
+/dev/sda1 / reiserfs defaults 0 1
+/dev/sda2 swap swap defaults 0 0
+/dev/sda3 /data reiserfs defaults 0 0
+192.168.1.6:/media /data/media nfs
+
diff --git a/abs/core-testing/LinHES-config/templates/mysql.service b/abs/core-testing/LinHES-config/templates/mysql.service
new file mode 100644
index 0000000..160450e
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/mysql.service
@@ -0,0 +1,13 @@
+<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
+<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
+
+<service-group>
+
+ <name replace-wildcards="yes">mysql_myth on %h</name>
+
+ <service>
+ <type>_mysql._tcp</type>
+ <port>3306</port>
+ </service>
+
+</service-group>
diff --git a/abs/core-testing/LinHES-config/templates/mysql.txt b/abs/core-testing/LinHES-config/templates/mysql.txt
new file mode 100755
index 0000000..04531b5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/mysql.txt
@@ -0,0 +1,29 @@
+DBHostName=127.0.0.1
+DBUserName=mythtv
+DBPassword=mythtv
+DBName=mythconverg
+DBType=QMYSQL3
+
+# Set the following if you want to use something other than the
+# machine's real hostname for identifying settings in the database.
+# This is useful if your hostname changes often, as otherwise
+# you'll need to reconfigure mythtv (or futz with the DB) every time.
+# TWO HOSTS MUST NOT USE THE SAME VALUE
+#
+#LocalHostName=my-unique-identifier-goes-here
+
+# If you want your frontend to be able to wake your MySQL server
+# using WakeOnLan, have a look at the following settings:
+#
+# Set the time the frontend waits (in seconds) between reconnect tries.
+# This should be the rough time your MySQL server needs for startup
+#WOLsqlReconnectWaitTime=0
+#
+#
+# This is the amount of retries to wake the MySQL server until the frontend
+# gives up
+#WOLsqlConnectRetry=5
+#
+#
+# This is the command executed to wake your MySQL server.
+#WOLsqlCommand=echo 'WOLsqlServerCommand not set'
diff --git a/abs/core-testing/LinHES-config/templates/ncid.conf.template b/abs/core-testing/LinHES-config/templates/ncid.conf.template
new file mode 100755
index 0000000..43ef490
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/ncid.conf.template
@@ -0,0 +1,51 @@
+# tcl/tk configuration file
+
+# Directory NCID uses to find the helper scripts
+set ProgDir /usr/share/ncid
+
+# default helper script
+set EXTPROG ncid-osd
+
+# Set Host to the NCID server address
+# Host defaults to 127.0.0.1
+#set Host 127.0.0.1
+set Host 192.168.1.5
+
+# The NCID port default is 3333
+set Port 3333
+
+# If the connection to the server is lost,
+# try every Delay seconds to reconnect
+# The Default: 60
+set Delay 20
+
+# If set to 1, display raw data received from the NCID server
+# If set to 0, do not display raw data received from the NCID server
+# Default: 0
+set Raw 0
+
+# If set to 1, output: date time number name
+# If set to 0, output: name number
+# Default: 0
+set All 1
+
+# If set to 1, display formatted CID, and CID log file on connect
+# If set to 0, ddo not isplay formatted CID, and CID log file on connect
+# Default: 0
+set Verbose 0
+
+# If set to 1, display information in terminal progran or external program
+# If set to 0, display information using a GUI
+# Default: 0
+set NoGUI 1
+
+# output name and number to external program
+# Default: 0
+set Callprog 1
+
+# ring number to call external program
+# Default: 0
+set CallOnRing 0
+
+# external called program
+set Program [list $ProgDir/$EXTPROG]
diff --git a/abs/core-testing/LinHES-config/templates/ncidd.conf.template b/abs/core-testing/LinHES-config/templates/ncidd.conf.template
new file mode 100644
index 0000000..daa2e79
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/ncidd.conf.template
@@ -0,0 +1,143 @@
+# ncid - Network CallerID Server Config File
+
+################################
+# Definitions and Line formats #
+################################
+
+# lines can be blank, or start with the words: send, set #
+#
+# A line is divided into words, separated by spaces
+#
+# A word is either a string of non-blank characters, everything
+# between double quotes, or an equal sign.
+#
+# SEND LINE FORMAT:
+# send DATATYPE [DATATYPE] ...
+# where DATATYPE = cidlog, cidinfo
+#
+# SET LINE FORMAT:
+# set ITEM = VALUE [ITEM = VALUE] ...
+# where ITEM = cidalias, cidlog, datalog, initcid, initstr,
+# lockfile, port, ttyclocal, ttyport, ttyspeed,
+# nomodem
+
+############################
+# Log and Info for Clients #
+############################
+
+# Send the call log to a client when connected
+# The default is not to send the call log file
+send cidlog
+
+# Send call info (LINE and RING) to a client at each ring
+# The default is not to send the call info line
+send cidinfo
+
+############################
+# NCID Communications Port #
+############################
+
+# The default TCP/IP port is 3333
+ set port = 3333
+
+#######################
+# Alias and Log Files #
+#######################
+
+# The default CID alias file: /etc/ncid/ncidd.alias
+# set cidalias = /etc/ncid/ncidd.alias
+
+# The default CID call log file: /var/log/cidcall.log
+# the log file must exist, ncidd will not create it
+# (also make the change in /etc/logrotate.d/ncidd
+# and also /etc/ncid/ncidrotate.conf)
+# set cidlog = /var/log/cidcall.log
+
+# The default tty data log file: /var/log/ciddata.log
+# the log file must exist, ncidd will not create it
+# (also make the change in /etc/logrotate.d/ncidd
+# and also /etc/ncid/ncidrotate.conf)
+# set datalog = /var/log/ciddata.log
+
+#####################
+# TTY Configuration #
+#####################
+
+# The default tty port: /dev/modem
+# set ttyport = /dev/cu.modem # Macintosh OS X
+ set ttyport = /dev/ttyS1
+
+# The default tty port speed: 19200
+# The tty speed can be one of: 38400, 19200, 9600, 4800
+# set ttyspeed = 4800 # NetCallerID port speed
+
+# Ignore tty control signals for internal modems and 3 wire serial cables
+# Disable tty control signals: ttyclocal = 1
+# Enable tty control signals: ttyclocal = 0 (default)
+# set ttyclocal = 1
+
+# The lockfile name is generated automatically
+# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem
+# set lockfile = /var/lock/LCK..ttyS0
+
+#####################
+# Modem or No Modem #
+#####################
+
+# Obtain CallerID from a CID device or a modem
+# device: nomodem = 1 (do not send AT commands)
+# modem: nomodem = 0 (default - send AT commands)
+# set nomodem = 1
+
+########################
+# Modem Initialization #
+########################
+
+# The default modem initialization is: "AT Z S0=0 E1 V1 Q0"
+# set initstr = "ATE1V1Q0"
+#
+# Alternate modem initialization string
+# set initstr = "AT&FE1V1Q0+VIP"
+
+# Addon strings to set modem for Distinctive Ring:
+# http://www.modemsite.com/56k/dring.asp
+#
+# 3Com/USR/TI chipset: ATS41=1
+# Reported Ring Codes: RING A, RING B, RING C
+# Rockwell/Conexant chipset: AT-SDR=7
+# Reported Ring Codes: RING 1, RING 2, RING 3
+# Lucent/Agere chipset: AT+VDR=1,0
+# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34
+#
+# Example adds 3Com DR to the default modem initialization
+# set initstr = "ATE1V1Q0S41=1"
+
+# The default for ncidd is to try two CID strings to setup
+# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1".
+# set initcid = "AT#CID=1"
+#
+# Alternate CID strings to try if default does not work:
+# set initcid = "AT+FCLASS=8;+VCID=1"
+# set initcid = "AT-STE=1;+VCID=1"
+# set initcid = "AT-STE=1;#CID=1"
+
+#################
+# TiVo Settings #
+#################
+# set ttyclocal = 1 # TiVo requires CLOCAL
+# set ttyport = /dev/ttyS1 # TiVo Modem Port
+# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port
+#
+# To use a modem on the TiVo serial port
+# Tivo (stereo mini jack) ->
+# -> (stereo mini plug) TiVo serial cable (9-pin male) ->
+# -> (9-pin Female) PC modem cable (25-pin Male ->
+# -> (25-pin Female) Modem
+# if the modem has switches, disable DTR
+# Use this string to set the modem before attaching it to the TiVo:
+# AT&F0&D0&B1&W
+#
+# set ttyport = /dev/ttyS3 # TiVo Serial Port
+#
+# End TiVo Settings
+
diff --git a/abs/core-testing/LinHES-config/templates/real_change_chan.sh b/abs/core-testing/LinHES-config/templates/real_change_chan.sh
new file mode 100755
index 0000000..efeba88
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/real_change_chan.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+REMOTE_NAME=SA3250
+cmd="$1"
+
+case $cmd in
+ [0-9]*)
+ for digit in $(echo $1 | sed -e 's/./& /g'); do
+ irsend SEND_ONCE $REMOTE_NAME $digit
+ sleep 0.3
+ # If things work OK with sleep 1, try this for faster channel changes:
+ # sleep 0.3
+ done
+ ;;
+
+ *)
+ irsend SEND_ONCE $REMOTE_NAME $cmd
+ ;;
+ esac
+ /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf
new file mode 100644
index 0000000..e7c1539
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf
@@ -0,0 +1,357 @@
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004
+#
+# contributed by
+#
+# brand: ATI Remote Wonder
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name wonder
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 147987
+ toggle_bit 0
+
+
+ begin codes
+ A 0x0000000014C500F0
+ B 0x0000000014C601F0
+ POWER 0x0000000014C702F0
+ TV 0x0000000014C803F0
+ DVD 0x0000000014C904F0
+ WEB 0x0000000014CA05F0
+ GUIDE 0x0000000014CB06F0
+ GRAB 0x0000000014CC07F0
+ VOL_DOWN 0x0000000014CE09F0
+ VOL_UP 0x0000000014CD08F0
+ MUTE 0x0000000014CF0AF0
+ CH_DOWN 0x0000000014D10CF0
+ CH_UP 0x0000000014D00BF0
+ A 0x0000000014C500F0
+ B 0x0000000014C601F0
+ 1 0x0000000014D20DF0
+ 2 0x0000000014D30EF0
+ 3 0x0000000014D40FF0
+ 4 0x0000000014D510F0
+ 5 0x0000000014D611F0
+ 6 0x0000000014D712F0
+ 7 0x0000000014D813F0
+ 8 0x0000000014D914F0
+ 9 0x0000000014DA15F0
+ 0 0x0000000014DC17F0
+ MENU 0x0000000014DB16F0
+ CHECK 0x0000000014DD18F0
+ C 0x0000000014DE19F0
+ D 0x0000000014E01BF0
+ UP 0x0000000014DF1AF0
+ LEFT 0x0000000014E21DF0
+ DOWN 0x0000000014E722F0
+ RIGHT 0x0000000014E41FF0
+ OK 0x0000000014E31EF0
+ REPLAY 0x0000000014E11CF0
+ FULLSCREEN 0x0000000014E520F0
+ E 0x0000000014E621F0
+ F 0x0000000014E823F0
+ REWIND 0x0000000014E924F0
+ FORWARD 0x0000000014EB26F0
+ PLAY 0x0000000014EA25F0
+ RECORD 0x0000000014EC27F0
+ STOP 0x0000000014ED28F0
+ PAUSE 0x0000000014EE29F0
+ end codes
+
+end remote
+
+
+
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
+#
+# contributed by Steffen
+#
+# brand: ATI Sapphire Remote Bob II USB
+# model no. of remote control: 5000024400
+# devices being controlled by this remote: MythTV
+#
+
+begin remote
+
+name wonder II
+bits 16
+eps 30
+aeps 100
+
+one 0 0
+zero 0 0
+pre_data_bits 8
+pre_data 0x0
+post_data_bits 16
+post_data 0x0
+gap 299851
+toggle_bit 0
+
+
+begin codes
+aux1 0x023F
+aux2 0x023F
+aux3 0x023F
+aux4 0x023F
+mouse_left_btn 0x02A9
+mouse_right_btn 0x02AA
+a 0x0278
+b 0x0279
+power 0x020C
+dvd 0x0238
+tv 0x0239
+help 0x02BE
+pc 0x023F
+resize 0x02D5
+hand 0x02D0
+ati 0x028E
+vol_up 0x0210
+vol_down 0x0211
+mute 0x020D
+ch_up 0x0220
+ch_down 0x0221
+mouse_up 0x013F
+mouse_down 0x013F
+mouse_left 0x013F
+mouse_right 0x013F
+1 0x0201
+2 0x0202
+3 0x0203
+4 0x0204
+5 0x0205
+6 0x0206
+7 0x0207
+8 0x0208
+9 0x0209
+0 0x0200
+list 0x0254
+check 0x0282
+info 0x02F9
+timer 0x0296
+arrow_up 0x0258
+arrow_left 0x025A
+arrow_right 0x025B
+arrow_down 0x0259
+ok 0x025C
+c 0x017A
+d 0x027B
+play 0x022C
+e 0x027C
+f 0x027D
+rewind 0x0229
+rec 0x0237
+stop 0x0231
+pause 0x0230
+ffwd 0x0228
+end codes
+
+end remote
+
+
+# Please make this file available to others
+# by sending it to <lirc at bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004
+#
+# contributed by gLaNDix
+#
+# brand: ATI
+# model no. of remote control: 5000023600
+# devices being controlled by this remote: MythTV 0.14
+#
+# USB ID: 0bc7:0004
+#
+
+begin remote
+
+ name REMOTE_WONDER
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 227933
+ toggle_bit 0
+
+
+ begin codes
+ A 0x000000000000D500
+ B 0x000000000000D601
+ C 0x000000000000EE19
+ D 0x000000000000F01B
+ E 0x000000000000F621
+ F 0x000000000000F823
+ POWER 0x000000000000D702
+ TV 0x000000000000D803
+ DVD 0x000000000000D904
+ WEB 0x000000000000DA05
+ BOOK 0x000000000000DB06
+ HAND 0x000000000000DC07
+ MOUSE_LEFT_BTN 0x0000000000004D78
+ MOUSE_LEFTBUTTONUP 0x0000000000004E79
+ MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79
+ MOUSE_RIGHT_BTN 0x000000000000517C
+ MOUSE_RIGHTBUTTONUP 0x000000000000527D
+ MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E
+ MOUSE_LEFT 0x0000000000004570
+ MOUSE_RIGHT 0x0000000000004671
+ MOUSE_UP 0x0000000000004772
+ MOUSE_DOWN 0x0000000000004873
+ MOUSE_UPRIGHT 0x0000000000004A75
+ MOUSE_DOWNRIGHT 0x0000000000004B76
+ MOUSE_DOWNLEFT 0x0000000000004C77
+ MOUSE_UPLEFT 0x0000000000004974
+ VOL_UP 0x000000000000DD08
+ VOL_DOWN 0x000000000000DE09
+ MUTE 0x000000000000DF0A
+ CH_DOWN 0x000000000000E10C
+ CH_UP 0x000000000000E00B
+ 1 0x000000000000E20D
+ 2 0x000000000000E30E
+ 3 0x000000000000E40F
+ 4 0x000000000000E510
+ 5 0x000000000000E611
+ 6 0x000000000000E712
+ 7 0x000000000000E813
+ 8 0x000000000000E914
+ 9 0x000000000000EA15
+ 0 0x000000000000EC17
+ DVD_ROOTMENU 0x000000000000EB16
+ SETUP 0x000000000000ED18
+ ARROW_UP 0x000000000000EF1A
+ ARROW_RIGHT 0x000000000000F41F
+ ARROW_DOWN 0x000000000000F722
+ ARROW_LEFT 0x000000000000F21D
+ OK 0x000000000000F31E
+ MAXAMIZE 0x000000000000F520
+ TV_ON_DEMAND 0x000000000000F11C
+ BACK 0x000000000000F924
+ PLAY 0x000000000000FA25
+ NEXT 0x000000000000FB26
+ RECORD 0x000000000000FC27
+ STOP 0x000000000000FD28
+ PAUSE 0x000000000000FE29
+ end codes
+
+end remote
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
+#
+# contributed by Jason Piterak
+#
+# brand: ati
+# This uses the atiusb driver
+#=20
+# model no. of remote control: 5000022000
+#
+# devices being controlled by this remote:
+# MythTV PVR using knopmyth by Cecil and Dale at
+# http://mysettopbox.tv
+# Key map names are as per ATI's website:
+#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
+# Feel free to change them as you see fit :-)
+#
+# NOTE: There are 16 channels for this remote; this file only
+# supports one channel. See the GATOS project for information
+# on how to change the channel. Not tested. Unknown channel.
+#
+
+begin remote
+
+ name atiusb
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0xF000
+ gap 139891
+ toggle_bit 0
+
+
+ begin codes
+ a 0x000000000000C500
+ b 0x000000000000C601
+ power 0x000000000000C702
+ tv 0x000000000000C803
+ dvd 0x000000000000C904
+ web 0x000000000000CA05
+ media_library 0x000000000000CB06
+ drag 0x000000000000CC07
+ mouse-button_left 0x0000000000003D78
+ mouse-button_right 0x000000000000417C
+ mouse-up 0x0000000000003772
+ mouse-down 0x0000000000003873
+ mouse-left 0x0000000000003570
+ mouse-right 0x0000000000003671
+ mouse-left_up 0x0000000000003974
+ mouse-right_up 0x0000000000003A75
+ mouse-left_down 0x0000000000003C77
+ mouse-right_down 0x0000000000003B76
+ vol-up 0x000000000000CD08
+ vol-down 0x000000000000CE09
+ mute 0x000000000000CF0A
+ chan-up 0x000000000000D00B
+ chan-down 0x000000000000D10C
+ 1 0x000000000000D20D
+ 2 0x000000000000D30E
+ 3 0x000000000000D40F
+ 4 0x000000000000D510
+ 5 0x000000000000D611
+ 6 0x000000000000D712
+ 7 0x000000000000D813
+ 8 0x000000000000D914
+ 9 0x000000000000DA15
+ 0 0x000000000000DC17
+ dvd-root_menu 0x000000000000DB16
+ launch_setup 0x000000000000DD18
+ c 0x000000000000DE19
+ d 0x000000000000E01B
+ tv_on_demand 0x000000000000E11C
+ max_window 0x000000000000E520
+ cursor-up 0x000000000000DF1A
+ cursor-down 0x000000000000E722
+ cursor-left 0x000000000000E21D
+ cursor-right 0x000000000000E41F
+ ok 0x000000000000E31E
+ e 0x000000000000E621
+ f 0x000000000000E823
+ rewind 0x000000000000E924
+ play 0x000000000000EA25
+ fast_forward 0x000000000000EB26
+ record 0x000000000000EC27
+ stop 0x000000000000ED28
+ pause 0x000000000000EE29
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
new file mode 100644
index 0000000..80eec07
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
@@ -0,0 +1,922 @@
+# ~/.mythtv/lircrc
+#
+# MythTV native LIRC config file for
+# the ATI-Wonder Remote
+# using lirc_atiusb driver
+#
+
+begin
+prog = mythtv
+button = a
+config = E
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = A
+config = E
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = b
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = B
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = B
+config = O
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = stop
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ffwd
+config = Right
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = FORWARD
+config = Right
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = rewind
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = REWIND
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = pause
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = play
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = P
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = mute
+config = |
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = MUTE
+config = |
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = vol_down
+config = F10
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+config = F10
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = vol_up
+config = F11
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+config = F11
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = f
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = F
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = e
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = E
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ch_up
+config = Up
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = CH_UP
+config = Up
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ch_down
+config = Down
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+config = Down
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = ok
+config = Enter
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = OK
+config = Enter
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = rec
+config = R
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = R
+repeat = 5
+end
+
+
+# ~/.mythtv/lircrc
+#
+# MythTV native LIRC config file for
+# the ATI-Wonder Remote
+# using lirc_atiusb driver
+#
+
+begin
+#Jumppoint for Program Guide created in Mythweb
+ prog = mythtv
+ button = TV
+ config = !
+end
+
+begin
+#Jumppoint for DVD playback created in Mythweb
+ prog = mythtv
+ button = DVD
+ config = @
+end
+
+begin
+ prog = mythtv
+#Jumppoint for MythWeater created in Mythweb
+ button = WEB
+ config = #
+end
+
+begin
+ prog = mythtv
+#Jumppoint for MythVideo created in Mythweb
+ button = BOOK
+ config = $
+end
+
+begin
+ prog = mythtv
+#Jumppoint for MythWeater created in Mythweb
+ button = HAND
+ config = %
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+ prog = mythtv
+ button = MOUSE_UP
+ config = Up
+end
+
+begin
+ prog = mythtv
+ button = MOUSE_DOWN
+ config = Down
+end
+
+begin
+ prog = mythtv
+ button = MOUSE_LEFT
+ config = Left
+end
+
+begin
+ prog = mythtv
+ button = MOUSE_RIGHT
+ config = Right
+end
+
+begin
+ prog = mythtv
+ button = MOUSE_RIGHT_BTN
+ config = Esc
+end
+
+begin
+ prog = mythtv
+# Enter button
+ button = MOUSE_LEFT_BTN
+ config = Return
+end
+
+begin
+ prog = mythtv
+ button = POWER
+ config = Esc
+end
+
+begin
+ prog = mythtv
+# Enter button
+ button = OK
+ config = Return
+end
+
+begin
+ prog = mythtv
+ button = ARROW_UP
+ config = Up
+end
+
+begin
+ prog = mythtv
+ button = ARROW_DOWN
+ config = Down
+end
+
+begin
+ prog = mythtv
+ button = ARROW_LEFT
+ config = Left
+end
+
+begin
+ prog = mythtv
+ button = ARROW_RIGHT
+ config = Right
+end
+
+begin
+ prog = mythtv
+ button = D
+ config = Esc
+end
+
+begin
+prog = mythtv
+button = CH_UP
+config = Up
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+config = Down
+end
+
+begin
+ prog = mythtv
+ button = VOL_DOWN
+ repeat = 3
+ config = F10
+end
+
+begin
+ prog = mythtv
+ button = VOL_UP
+ repeat = 3
+ config = F11
+end
+
+begin
+ prog = mythtv
+ button = MUTE
+ config = |
+end
+
+begin
+ prog = mythtv
+ button = DVD_ROOTMENU
+ config = M
+end
+
+begin
+ prog = mythtv
+# Enter button
+ button = SETUP
+ config = Return
+end
+
+
+begin
+ prog = mythtv
+ button = A
+ config = S
+end
+
+begin
+ prog = mythtv
+ button = B
+ config = I
+end
+
+begin
+ prog = mythtv
+ button = C
+ config = T
+end
+
+begin
+prog = mythtv
+# Change focus for PiP (to change channel in the other window)
+button = MAXAMIZE
+config = B
+end
+
+begin
+prog = mythtv
+# Toggle PiP on/off
+button = TV_ON_DEMAND
+config = V
+end
+
+begin
+ prog = mythtv
+ button = BACK
+ config = <
+end
+
+begin
+ prog = mythtv
+ button = NEXT
+ config = >
+end
+
+begin
+ prog = mythtv
+ button = BACK
+ config = Left
+end
+
+
+begin
+ prog = mythtv
+ button = NEXT
+ config = Right
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = R
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = P
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = P
+end
+
+#Page Up/Down
+begin
+prog = mythtv
+button = E
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = F
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = E
+# Use for backwards commercial skip
+config = Q
+end
+
+begin
+prog = mythtv
+button = F
+# Use for forward commercial skip
+config = Z
+end
+
+#Mplayer
+
+begin
+prog = mplayer
+button = PLAY
+config = pause
+end
+
+begin
+prog = mplayer
+button = PAUSE
+config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = D
+config = quit
+end
+
+begin
+prog = mplayer
+button = MOUSE_RIGHT_BTN
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = E
+repeat = 6
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = F
+repeat = 6
+config = seek 10
+end
+
+begin
+prog = mplayer
+button = BACK
+repeat = 6
+config = seek -70
+end
+
+begin
+prog = mplayer
+button = NEXT
+repeat = 6
+config = seek 70
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 6
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 6
+config = volume 1
+end
+
+#Xine
+
+begin
+prog = xine
+button = PLAY
+config = Play
+end
+
+begin
+prog = xine
+button = PAUSE
+config = PAUSE
+end
+
+begin
+prog = xine
+button = Mute
+config = Mute
+end
+
+begin
+prog = xine
+button = STOP
+config = Stop
+end
+
+begin
+prog = xine
+button = POWER
+config = Quit
+end
+
+begin
+prog = xine
+button = D
+config = quit
+end
+
+begin
+prog = xine
+button = MOUSE_RIGHT_BTN
+config = quit
+end
+
+begin
+prog = xine
+button = ARROW_UP
+repeat = 4
+config = EventUp
+end
+
+begin
+prog = xine
+button = ARROW_DOWN
+repeat = 4
+config = EventDown
+end
+
+begin
+prog = xine
+button = ARROW_LEFT
+repeat = 4
+config = EventLeft
+end
+
+begin
+prog = xine
+button = ARROW_RIGHT
+repeat = 4
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 0
+config = EventSelect
+end
+
+begin
+prog = xine
+button = MOUSE_UP
+repeat = 4
+config = EventUp
+end
+
+begin
+prog = xine
+button = MOUSE_DOWN
+repeat = 4
+config = EventDown
+end
+
+begin
+prog = xine
+button = MOUSE_LEFT
+repeat = 4
+config = EventLeft
+end
+
+begin
+prog = xine
+button = MOUSE_RIGHT
+repeat = 4
+config = EventRight
+end
+
+begin
+prog = xine
+button = MOUSE_LEFT_BTN
+repeat = 0
+config = EventSelect
+end
+
+begin
+prog = xine
+button = DVD_ROOTMENU
+repeat = 0
+config = Menu
+end
+
+#vol down
+begin
+prog = xine
+button = VOL_DOWN
+repeat = 1
+config = Volume-
+end
+
+#vol up
+begin
+prog = xine
+button = VOL_UP
+repeat = 1
+config = Volume+
+end
+
+begin
+prog = xine
+button = TV_ON_DEMAND
+repeat = 1
+config = ZoomIn
+end
+
+begin
+prog = xine
+button = MAXAMIZE
+repeat = 1
+config = ZoomOut
+end
+
+#skip chapter forward
+begin
+prog = xine
+button = NEXT
+repeat = 1
+config = EventNext
+end
+
+#skip chapter backward
+begin
+prog = xine
+button = BACK
+repeat = 1
+config = EventPrior
+end
+
+begin
+prog = xine
+button = F
+repeat = 2
+config = SeekRelative+45
+end
+
+begin
+prog = xine
+button = E
+repeat = 2
+config = SeekRelative-45
+end
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg
new file mode 100644
index 0000000..351a111
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
new file mode 100644
index 0000000..b76d32c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
@@ -0,0 +1,115 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand: Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+ name Streamzap_PC_Remote
+ bits 6
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 889 889
+ zero 889 889
+ plead 889
+ pre_data_bits 8
+ pre_data 0xA3
+ gap 108344
+ toggle_bit 2
+
+
+ begin codes
+ 0 0x00
+ 1 0x01
+ 2 0x02
+ 3 0x03
+ 4 0x04
+ 5 0x05
+ 6 0x06
+ 7 0x07
+ 8 0x08
+ 9 0x09
+ POWER 0x0A
+ MUTE 0x0B
+ CH_UP 0x0C
+ VOL_UP 0x0D
+ CH_DOWN 0x0E
+ VOL_DOWN 0x0F
+ UP 0x10
+ LEFT 0x11
+ OK 0x12
+ RIGHT 0x13
+ DOWN 0x14
+ MENU 0x15
+ EXIT 0x16
+ PLAY 0x17
+ PAUSE 0x18
+ STOP 0x19
+ |<< 0x1A
+ >>| 0x1B
+ RECORD 0x1C
+ << 0x1D
+ >> 0x1E
+ RED 0x20
+ GREEN 0x21
+ YELLOW 0x22
+ BLUE 0x23
+ end codes
+
+end remote
+
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005
+#
+# contributed by
+#
+# brand: RS_LD_120-MX500
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name RS_LD
+ bits 15
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 384 1920
+ zero 384 896
+ ptrail 384
+ gap 70400
+ min_repeat 2
+ toggle_bit 0
+
+
+ begin codes
+ RESET 0x19FD
+ TIME 0X1902
+ BLANK 0X1B02
+ PICTURE 0X1882
+ ASPECT 0X1A82
+ BROWSE 0X1982
+ DELETE 0X1B82
+ CARD 0X1842
+ CARD_SOURCE 0X1A42
+ SPARE1 0X1942
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc
new file mode 100644
index 0000000..5e668b5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc
@@ -0,0 +1,832 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+ remote = RS_LD
+ button = RESET
+ prog = irexec
+ repeat = 0
+ config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+ remote = RS_LD
+ button = TIME
+ prog = irexec
+ repeat = 10
+ config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+ remote = RS_LD
+ button = BLANK
+ prog = irexec
+ repeat = 0
+# config = ls
+ config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 4
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+end
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = i
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+ prog = mplayer
+ button = pause
+ config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+ button = DELETE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+ button = PICTURE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button = >>
+repeat = 4
+#config = SeekRelative+30
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config = SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config = SeekRelative-1200
+end
+
+begin
+prog = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+ begin
+ prog = xmms
+ button = PLAY
+ config = PLAY
+ end
+ begin
+ prog = xmms
+ button = clear
+ config = PLAYLIST_CLEAR
+ end
+ begin
+ prog = xmms
+ button = load
+ config = PLAYLIST_ADD .xmms/xmms.m3u
+ end
+ begin
+ prog = xmms
+ button = PAUSE
+ config = PAUSE
+ end
+ begin
+ prog = xmms
+ button = STOP
+ config = STOP
+ end
+ begin
+ prog = xmms
+ button = EXIT
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = POWER
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = CH_UP
+ config = NEXT
+ end
+ begin
+ prog = xmms
+ button = CH_DOWN
+ config = PREV
+ end
+
+
+
+begin
+ prog = xmms
+ button = >>|
+ config = NEXT
+ end
+begin
+ prog = xmms
+ button = |<<
+ config = PREV
+end
+
+
+begin
+ prog = xmms
+ button = <<
+ config = FWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = <<
+ config = BWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = volup
+ config = VOL_UP 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = voldown
+ config = VOL_DOWN 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = 1
+ config = ONE
+ end
+ begin
+ prog = xmms
+ button = 2
+ config = TWO
+ end
+ begin
+ prog = xmms
+ button = 3
+ config = THREE
+ end
+ begin
+ prog = xmms
+ button = 4
+ config = FOUR
+ end
+ begin
+ prog = xmms
+ button = 5
+ config = FIVE
+ end
+ begin
+ prog = xmms
+ button = 6
+ config = SIX
+ end
+ begin
+ prog = xmms
+ button = 7
+ config = SEVEN
+ end
+ begin
+ prog = xmms
+ button = 8
+ config = EIGHT
+ end
+ begin
+ prog = xmms
+ button = 9
+ config = NINE
+ end
+ begin
+ prog = xmms
+ button = 0
+ config = ZERO
+ end
+ begin
+ prog = xmms
+ button = enter
+ config = SETPOS
+ end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg
new file mode 100644
index 0000000..38857f9
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf
new file mode 100644
index 0000000..b76d32c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf
@@ -0,0 +1,115 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand: Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+ name Streamzap_PC_Remote
+ bits 6
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 889 889
+ zero 889 889
+ plead 889
+ pre_data_bits 8
+ pre_data 0xA3
+ gap 108344
+ toggle_bit 2
+
+
+ begin codes
+ 0 0x00
+ 1 0x01
+ 2 0x02
+ 3 0x03
+ 4 0x04
+ 5 0x05
+ 6 0x06
+ 7 0x07
+ 8 0x08
+ 9 0x09
+ POWER 0x0A
+ MUTE 0x0B
+ CH_UP 0x0C
+ VOL_UP 0x0D
+ CH_DOWN 0x0E
+ VOL_DOWN 0x0F
+ UP 0x10
+ LEFT 0x11
+ OK 0x12
+ RIGHT 0x13
+ DOWN 0x14
+ MENU 0x15
+ EXIT 0x16
+ PLAY 0x17
+ PAUSE 0x18
+ STOP 0x19
+ |<< 0x1A
+ >>| 0x1B
+ RECORD 0x1C
+ << 0x1D
+ >> 0x1E
+ RED 0x20
+ GREEN 0x21
+ YELLOW 0x22
+ BLUE 0x23
+ end codes
+
+end remote
+
+
+
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005
+#
+# contributed by
+#
+# brand: RS_LD_120-MX500
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name RS_LD
+ bits 15
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 384 1920
+ zero 384 896
+ ptrail 384
+ gap 70400
+ min_repeat 2
+ toggle_bit 0
+
+
+ begin codes
+ RESET 0x19FD
+ TIME 0X1902
+ BLANK 0X1B02
+ PICTURE 0X1882
+ ASPECT 0X1A82
+ BROWSE 0X1982
+ DELETE 0X1B82
+ CARD 0X1842
+ CARD_SOURCE 0X1A42
+ SPARE1 0X1942
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc
new file mode 100755
index 0000000..2663c63
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc
@@ -0,0 +1,857 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+ remote = RS_LD
+ button = RESET
+ prog = irexec
+ repeat = 0
+ config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+ remote = RS_LD
+ button = TIME
+ prog = irexec
+ repeat = 10
+ config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+ remote = RS_LD
+ button = BLANK
+ prog = irexec
+ repeat = 0
+# config = ls
+ config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 5
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+repeat = 5
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+repeat = 5
+end
+
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+repeat = 5
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+repeat = 5
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+repeat = 5
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+repeat = 5
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+repeat = 5
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = S
+repeat = 5
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+ prog = mplayer
+ button = pause
+ config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+ button = DELETE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+ button = PICTURE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button = >>
+repeat = 4
+#config = SeekRelative+30
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config = SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config = SeekRelative-1200
+end
+
+begin
+prog = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+ begin
+ prog = xmms
+ button = PLAY
+ config = PLAY
+ end
+ begin
+ prog = xmms
+ button = clear
+ config = PLAYLIST_CLEAR
+ end
+ begin
+ prog = xmms
+ button = load
+ config = PLAYLIST_ADD .xmms/xmms.m3u
+ end
+ begin
+ prog = xmms
+ button = PAUSE
+ config = PAUSE
+ end
+ begin
+ prog = xmms
+ button = STOP
+ config = STOP
+ end
+ begin
+ prog = xmms
+ button = EXIT
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = POWER
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = CH_UP
+ config = NEXT
+ end
+ begin
+ prog = xmms
+ button = CH_DOWN
+ config = PREV
+ end
+
+
+
+begin
+ prog = xmms
+ button = >>|
+ config = NEXT
+ end
+begin
+ prog = xmms
+ button = |<<
+ config = PREV
+end
+
+
+begin
+ prog = xmms
+ button = <<
+ config = FWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = <<
+ config = BWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = volup
+ config = VOL_UP 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = voldown
+ config = VOL_DOWN 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = 1
+ config = ONE
+ end
+ begin
+ prog = xmms
+ button = 2
+ config = TWO
+ end
+ begin
+ prog = xmms
+ button = 3
+ config = THREE
+ end
+ begin
+ prog = xmms
+ button = 4
+ config = FOUR
+ end
+ begin
+ prog = xmms
+ button = 5
+ config = FIVE
+ end
+ begin
+ prog = xmms
+ button = 6
+ config = SIX
+ end
+ begin
+ prog = xmms
+ button = 7
+ config = SEVEN
+ end
+ begin
+ prog = xmms
+ button = 8
+ config = EIGHT
+ end
+ begin
+ prog = xmms
+ button = 9
+ config = NINE
+ end
+ begin
+ prog = xmms
+ button = 0
+ config = ZERO
+ end
+ begin
+ prog = xmms
+ button = enter
+ config = SETPOS
+ end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg
new file mode 100644
index 0000000..e2af610
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
new file mode 100644
index 0000000..f8175f3
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
@@ -0,0 +1,87 @@
+# this config file was generated
+# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004
+#
+# contributed by Jarod Wilson <jcw@wilsonet.com>
+#------------------------------------------------------------------------------
+#
+# filename: RadioShack_15-2116-vcr0081.lirc
+# encoding: RC-5
+# brand: RadioShack Universal (and others)
+# model: 15-2116, set as VCR type 0081
+# supported devices: all
+#
+# note: requires quite a bit of key reassignment w/keymover and EFCs...
+# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO
+#
+#------------------------------------------------------------------------------
+
+begin remote
+
+ name rs15-2116-vcr0081
+ bits 11
+ flags RC5|CONST_LENGTH
+ eps 20
+ aeps 0
+ header 0 0
+ one 889 889
+ zero 889 889
+ plead 889
+ ptrail 0
+ foot 0 0
+ repeat 0 0
+ pre_data_bits 2
+ pre_data 0x02
+ post_data_bits 0
+ post_data 0x0
+ pre 0 0
+ post 0 0
+ gap 113792
+ toggle_bit 2
+ frequency 36000
+ duty_cycle 50
+
+ begin codes
+ 0 0x0000000000000140
+ 1 0x0000000000000141
+ 2 0x0000000000000142
+ 3 0x0000000000000143
+ 4 0x0000000000000144
+ 5 0x0000000000000145
+ 6 0x0000000000000146
+ 7 0x0000000000000147
+ 8 0x0000000000000148
+ 9 0x0000000000000149
+ INFO 0x000000000000014a
+ SELECT 0x000000000000014b
+ POWER 0x000000000000014c
+ MUTE 0x000000000000014d
+ MOVE 0x000000000000014e
+ VOL+ 0x0000000000000150
+ VOL- 0x0000000000000151
+ RIGHT 0x000000000000015a
+ LEFT 0x000000000000015b
+ ENTER 0x000000000000015c
+ MENU 0x000000000000015d
+ CH+ 0x0000000000000160
+ CH- 0x0000000000000161
+ PIP 0x0000000000000162
+ SWAP 0x0000000000000163
+ SLEEP 0x0000000000000166
+ FREEZE 0x0000000000000168
+ PAUSE 0x0000000000000169
+ SKIP 0x000000000000016a
+ EXIT 0x0000000000000171
+ REW 0x0000000000000172
+ REPLAY 0x0000000000000173
+ FFWD 0x0000000000000174
+ PLAY 0x0000000000000175
+ STOP 0x0000000000000176
+ REC 0x0000000000000177
+ SKIP 0x0000000000000178
+ +100 0x0000000000000179
+ LAST 0x000000000000017b
+ GUIDE 0x000000000000017c
+ TV/VIDEO 0x000000000000017e
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
new file mode 100644
index 0000000..91c0de5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
@@ -0,0 +1,539 @@
+# ~/.mythtv/lircrc
+#
+# MythTV native LIRC config file for
+# the RadioShack 15-2116, VCR type 0081
+# using Hauppauge IR receiver
+#
+# By Jarod Wilson, 2003/12/31
+# Amalgamated from Harry O's
+# .lircrc, the mythtv.org docs, and
+# a few touches of my own. :)
+#
+
+# Channel Up
+begin
+prog = mythtv
+button = CH+
+repeat = 4
+config = Up
+end
+
+# Channel Down
+begin
+prog = mythtv
+button = CH-
+repeat = 4
+config = Down
+end
+
+# OK/Select
+begin
+prog = mythtv
+button = SELECT
+repeat = 4
+config = Return
+end
+
+# Play
+begin
+prog = mythtv
+button = PLAY
+repeat = 4
+config = Space
+end
+
+# Stop
+begin
+prog = mythtv
+button = STOP
+repeat = 4
+config = Esc
+end
+
+# Escape/Exit/Back
+begin
+prog = mythtv
+button = EXIT
+repeat = 4
+config = Esc
+end
+
+# Power Off/Exit
+begin
+prog = mythtv
+button = POWER
+repeat = 4
+config = Esc
+end
+
+# Pause
+begin
+prog = mythtv
+button = PAUSE
+repeat = 4
+config = P
+end
+
+# Mute
+begin
+prog = mythtv
+button = MUTE
+repeat = 4
+config = |
+end
+
+# Rewind (10 sec default)
+begin
+prog = mythtv
+button = REW
+repeat = 4
+config = Left
+end
+
+begin
+prog = mythtv
+button = LEFT
+repeat = 4
+config = Left
+end
+
+# Fast forward (30 sec default)
+begin
+prog = mythtv
+button = FFWD
+repeat = 4
+config = Right
+end
+
+begin
+prog = mythtv
+button = RIGHT
+repeat = 4
+config = Right
+end
+
+# Skip forward (10 min default)
+begin
+prog = mythtv
+button = FREEZE
+repeat = 4
+config = PgDown
+end
+
+# Skip backward (10 min default)
+begin
+prog = mythtv
+button = MOVE
+repeat = 4
+config = PgUp
+end
+
+# Record
+begin
+prog = mythtv
+button = REC
+repeat = 4
+config = R
+end
+
+# OSD browse
+begin
+prog = mythtv
+button = GUIDE
+repeat = 4
+config = O
+end
+
+# Display EPG while in live TV,
+# View selected show while in EPG
+begin
+prog = mythtv
+button = MENU
+repeat = 4
+config = M
+end
+
+# Bring up OSD info
+begin
+prog = mythtv
+button = INFO
+repeat = 4
+config = I
+end
+
+# Change display aspect ratio
+begin
+prog = mythtv
+button = +100
+repeat = 4
+config = W
+end
+
+# Seek to previous commercial cut point
+begin
+prog = mythtv
+button = SLEEP
+repeat = 4
+config = Q
+end
+
+# Seek to next commercial cut point
+begin
+prog = mythtv
+button = ENTER
+repeat = 4
+config = Z
+end
+
+# Change TV card input
+begin
+prog = mythtv
+button = TV/VIDEO
+repeat = 4
+config = C
+end
+
+# Toggle Picture-In-Picture
+begin
+prog = mythtv
+button = PIP
+repeat = 4
+config = V
+end
+
+# Swap PIP
+begin
+prog = mythtv
+button = SWAP
+repeat = 4
+config = N
+end
+
+# Cycle through channel history
+begin
+prog = mythtv
+button = LAST
+repeat = 4
+config = H
+end
+
+# Numbers 0-9
+
+begin
+prog = mythtv
+button = 0
+repeat = 4
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+repeat = 4
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+repeat = 4
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+repeat = 4
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+repeat = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+repeat = 4
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+repeat = 4
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+repeat = 4
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+repeat = 4
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+repeat = 4
+config = 9
+end
+
+### MPlayer commands
+
+begin
+prog = mplayer
+button = MENU
+repeat = 4
+config = osd
+end
+
+begin
+prog = mplayer
+button = PAUSE
+repeat = 4
+config = pause
+end
+
+begin
+prog = mplayer
+button = PLAY
+repeat = 4
+config = seek +1
+end
+
+begin
+prog = mplayer
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = mplayer
+button = REW
+repeat = 4
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = LEFT
+repeat = 4
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = FFWD
+repeat = 4
+config = seek +30
+end
+
+begin
+prog = mplayer
+button = RIGHT
+repeat = 4
+config = seek +30
+end
+
+begin
+prog = mplayer
+button = EXIT
+repeat = 4
+config = quit
+end
+
+begin
+prog = mplayer
+button = FREEZE
+repeat = 4
+config = seek +1200
+end
+
+begin
+prog = mplayer
+button = MOVE
+repeat = 4
+config = seek -1200
+end
+
+begin
+prog = mplayer
+button = +100
+repeat = 4
+config = vo_fullscreen
+end
+
+### Xine commands
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = CH+
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = CH-
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = LEFT
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = RIGHT
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = SELECT
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = GUIDE
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = FFWD
+repeat = 3
+config = SeekRelative+30
+end
+
+begin
+prog = xine
+button = REW
+repeat = 3
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button = VOL+
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VOL-
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = FREEZE
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = LAST
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = INFO
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = ENTER
+repeat = 3
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = SLEEP
+repeat = 3
+config = SpeedSlower
+end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
new file mode 100644
index 0000000..d465839
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410
new file mode 100644
index 0000000..3f6c5f0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410
@@ -0,0 +1,62 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005
+#
+# contributed by
+#
+# brand: Adaptec
+# model no. of remote control:
+# devices being controlled by this remote: AVC-2410 capture card
+#
+
+begin remote
+
+ name AVC-2410
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 16
+ pre_data 0x82F1
+ gap 202922
+ min_repeat 0
+ toggle_bit 0
+
+
+ begin codes
+ Live 0x00000000000025DA
+ Timeshift 0x00000000000017E8
+ Scan 0x00000000000018e7
+ Power 0x00000000000009f6
+ 1 0x00000000000026D9
+ 2 0x00000000000019E6
+ 3 0x00000000000010EF
+ 4 0x00000000000027D8
+ 5 0x00000000000020DF
+ 6 0x00000000000011EE
+ 7 0x00000000000028D7
+ 8 0x00000000000021DE
+ 9 0x00000000000012ED
+ 0 0x00000000000022DD
+ Mute 0x00000000000013EC
+ Full 0x00000000000029D6
+ Play 0x00000000000030CF
+ Stop 0x00000000000023DC
+ Skip 0x00000000000024DB
+ Replay 0x00000000000014EB
+ Rewind 0x00000000000031CE
+ Forward 0x00000000000015EA
+ Ch+ 0x00000000000001FE
+ Ch- 0x00000000000005FA
+ Vol+ 0x00000000000004FB
+ Vol- 0x00000000000002FD
+ Enter 0x00000000000003FC
+ OSD 0x00000000000032CD
+ cc 0x00000000000016E9
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax
new file mode 100644
index 0000000..06a4102
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax
@@ -0,0 +1,199 @@
+
+#
+# This is a space encoded remote control from AnimaX.
+# You need at least lirc-0.5.4 to use this config file
+#
+# contributed by Karsten Scheibler <karsten.scheibler@student.uni-halle.de>
+#
+# brand: AnimaX
+# model: Anir Remote Control
+# supported devices: This remote control comes with some TV Tuner cards from
+# Hauppauge.
+#
+
+begin remote
+
+ name ANIMAX
+ bits 16
+ flags SPACE_ENC|REVERSE
+ eps 20
+ aeps 0
+
+ header 4500 4500
+ one 562 1682
+ zero 562 562
+ ptrail 562
+ plead 0
+ foot 0 0
+ repeat 2500 2500
+ pre_data_bits 8
+ pre_data 0xF0
+ post_data_bits 0
+ post_data 0x0
+ pre 0 0
+ post 0 0
+ gap 12937
+ repeat_gap 102937
+ repeat_bit 0
+
+ begin codes
+ CD_DOWN 0x000000000000DB24
+ CD_UP 0x0000000000005BA4
+ TV_DOWN 0x000000000000DC23
+ TV_UP 0x0000000000005CA3
+ PHONE_DOWN 0x000000000000DD22
+ PHONE_UP 0x0000000000005DA2
+ RADIO_DOWN 0x000000000000DE21
+ RADIO_UP 0x0000000000005EA1
+ VIDEO_DOWN 0x000000000000DF20
+ VIDEO_UP 0x0000000000005FA0
+ AUX1_DOWN 0x000000000000E01F
+ AUX1_UP 0x000000000000609F
+ MAIL_DOWN 0x000000000000E11E
+ MAIL_UP 0x000000000000619E
+ AUX2_DOWN 0x000000000000E21D
+ AUX2_UP 0x000000000000629D
+ POWER_DOWN 0x000000000000E31C
+ POWER_UP 0x000000000000639C
+ LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B
+ LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B
+ REWIND_DOWN 0x000000000000E51A
+ REWIND_UP 0x000000000000659A
+ PLAY_DOWN 0x000000000000E619
+ PLAY_UP 0x0000000000006699
+ FORWARD_DOWN 0x000000000000E718
+ FORWARD_UP 0x0000000000006798
+ SKIP_BACKWARD_DOWN 0x000000000000E817
+ SKIP_BACKWARD 0x0000000000006897
+ STOP_DOWN 0x000000000000E916
+ STOP_UP 0x0000000000006996
+ SKIP_FORWARD_DOWN 0x000000000000EA15
+ SKIP_FORWARD_UP 0x0000000000006A95
+ CHANNEL_UP_DOWN 0x000000000000EB14
+ CHANNEL_UP_UP 0x0000000000006B94
+ MENU_DOWN 0x000000000000EC13
+ MENU_UP 0x0000000000006C93
+ VOLUME_UP_DOWN 0x000000000000ED12
+ VOLUME_UP_UP 0x0000000000006D92
+ BLUE_BUTTON_DOWN 0x000000000000EE11
+ BLUE_BUTTON_UP 0x0000000000006E91
+ MUTE_DOWN 0x000000000000EF10
+ MUTE_UP 0x0000000000006F90
+ VOLUME_DOWN_DOWN 0x000000000000F00F
+ VOLUME_DOWN_UP 0x000000000000708F
+ RED_BUTTON_DOWN 0x000000000000F10E
+ RED_BUTTON_UP 0x000000000000718E
+ GREEN_BUTTON_DOWN 0x000000000000F20D
+ GREEN_BUTTON_UP 0x000000000000728D
+ CHANNEL_DOWN_DOWN 0x000000000000F30C
+ CHANNEL_DOWN_UP 0x000000000000738C
+ 1_DOWN 0x000000000000F40B
+ 1_UP 0x000000000000748B
+ 2_DOWN 0x000000000000F50A
+ 2_UP 0x000000000000758A
+ 3_DOWN 0x000000000000F609
+ 3_UP 0x0000000000007689
+ 4_DOWN 0x000000000000F708
+ 4_UP 0x0000000000007788
+ 5_DOWN 0x000000000000F807
+ 5_UP 0x0000000000007887
+ 6_DOWN 0x000000000000F906
+ 6_UP 0x0000000000007986
+ 7_DOWN 0x000000000000FA05
+ 7_UP 0x0000000000007A85
+ 8_DOWN 0x000000000000FB04
+ 8_UP 0x0000000000007B84
+ 9_DOWN 0x000000000000FC03
+ 9_UP 0x0000000000007C83
+ SLASH_DOWN 0x000000000000FD02
+ SLASH_UP 0x0000000000007D82
+ 0_DOWN 0x000000000000FE01
+ 0_UP 0x0000000000007E81
+ MINUS_DOWN 0x000000000000FF00
+ MINUS_UP 0x0000000000007F80
+ end codes
+
+end remote
+
+
+begin remote
+
+ name ANIMAX_MOUSE_BUTTONS
+ bits 16
+ flags SPACE_ENC|REVERSE
+ eps 20
+ aeps 0
+
+ header 4500 4500
+ one 562 1682
+ zero 562 562
+ ptrail 562
+ plead 0
+ foot 0 0
+ repeat 0 0
+ pre_data_bits 8
+ pre_data 0xF0
+ post_data_bits 0
+ post_data 0x0
+ pre 0 0
+ post 0 0
+ gap 12937
+ repeat_bit 0
+
+ begin codes
+ RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639
+ RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9
+ LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31
+ LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1
+ end codes
+
+end remote
+
+
+begin remote
+
+ name ANIMAX_MOUSE_PAD
+ bits 16
+ flags SPACE_ENC|REVERSE
+ eps 20
+ aeps 0
+
+ header 4500 4500
+ one 562 1682
+ zero 562 562
+ ptrail 562
+ plead 0
+ foot 0 0
+ repeat 2500 2500
+ pre_data_bits 8
+ pre_data 0xF0
+ post_data_bits 0
+ post_data 0x0
+ pre 0 0
+ post 0 0
+ gap 12937
+ repeat_gap 8437
+ repeat_bit 0
+
+ begin codes
+ MOUSE_NNW 0x000000000000906F
+ MOUSE_NW 0x000000000000D02F
+ MOUSE_NWW 0x000000000000916E
+ MOUSE_W 0x000000000000D12E
+ MOUSE_SWW 0x000000000000926D
+ MOUSE_SW 0x000000000000D22D
+ MOUSE_SSW 0x000000000000936C
+ MOUSE_S 0x000000000000D32C
+ MOUSE_SSE 0x000000000000946B
+ MOUSE_SE 0x000000000000D42B
+ MOUSE_SEE 0x000000000000956A
+ MOUSE_E 0x000000000000D52A
+ MOUSE_NEE 0x0000000000009669
+ MOUSE_NE 0x000000000000D629
+ MOUSE_NNE 0x0000000000009768
+ MOUSE_N 0x000000000000D728
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax
new file mode 100644
index 0000000..09a2341
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax
@@ -0,0 +1,71 @@
+#
+# lircmd config file for the animax remote control
+#
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 1 3 2
+
+#ACTIVATE * MENU
+
+
+
+MOVE_N ANIMAX_MOUSE_PAD MOUSE_N
+MOVE_N ANIMAX_MOUSE_PAD MOUSE_N
+
+MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE
+MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE
+
+MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE
+MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE
+
+MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE
+MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE
+
+MOVE_E ANIMAX_MOUSE_PAD MOUSE_E
+MOVE_E ANIMAX_MOUSE_PAD MOUSE_E
+
+MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE
+MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE
+
+MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE
+MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE
+
+MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE
+MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE
+
+MOVE_S ANIMAX_MOUSE_PAD MOUSE_S
+MOVE_S ANIMAX_MOUSE_PAD MOUSE_S
+
+MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW
+MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW
+
+MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW
+MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW
+
+MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW
+MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW
+
+MOVE_W ANIMAX_MOUSE_PAD MOUSE_W
+MOVE_W ANIMAX_MOUSE_PAD MOUSE_W
+
+MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW
+MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW
+
+MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW
+MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW
+
+MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW
+MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW
+
+
+
+BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN
+
+BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN
+BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN
+
+BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP
+BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus
new file mode 100644
index 0000000..ceadbf0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus
@@ -0,0 +1,56 @@
+#
+# contributed by Tibor Sipos <tibors@moravia-it.com> and
+# Stefan Jahn <stefan@lkcc.org>
+#
+# brand: Asus
+# model: Asus TV-Box Remote Control
+#
+
+begin remote
+
+ name Asus TV-Box IR
+
+ bits 8
+ eps 30
+ aeps 100
+ one 0 0
+ zero 0 0
+ gap 1399999
+ toggle_bit 0
+
+ begin codes
+ 0 0x0000000000000000
+ 1 0x0000000000000008
+ 2 0x0000000000000010
+ 3 0x0000000000000018
+ 4 0x0000000000000020
+ 5 0x0000000000000028
+ 6 0x0000000000000030
+ 7 0x0000000000000038
+ 8 0x0000000000000040
+ 9 0x0000000000000048
+ PREV 0x0000000000000050
+ ENTER 0x0000000000000058
+ CH+ 0x0000000000000060
+ CH- 0x0000000000000068
+ VOL+ 0x0000000000000070
+ VOL- 0x0000000000000078
+ MAXIMIZE 0x0000000000000080
+ MUTE 0x0000000000000088
+ POWER 0x0000000000000090
+ MENU 0x0000000000000098
+ UP 0x00000000000000A0
+ DOWN 0x00000000000000A8
+ LEFT 0x00000000000000B0
+ RIGHT 0x00000000000000B8
+ CAPTION 0x00000000000000C0
+ MTS/SAP 0x00000000000000C8
+ DISPLAY 0x00000000000000D0
+ SCAN 0x00000000000000D8
+ RED 0x00000000000000E0
+ GREEN 0x00000000000000E8
+ YELLOW 0x00000000000000F0
+ BLUE 0x00000000000000F8
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix
new file mode 100644
index 0000000..a6e9abd
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix
@@ -0,0 +1,152 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004
+#
+# contributed by
+#
+# brand: ASUS
+# model no. of remote control: DigiMatrix
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name ASUS_DigiMatrix
+ bits 16
+ flags SPACE_ENC
+ eps 30
+ aeps 100
+
+ header 8057 4071
+ one 479 1534
+ zero 479 531
+ ptrail 491
+ pre_data_bits 8
+ pre_data 0x35
+ gap 25647
+ toggle_bit 0
+
+
+ begin codes
+ up 0x000000000000E817
+ down 0x00000000000018E7
+ enter 0x000000000000D02F
+ left 0x0000000000009867
+ right 0x00000000000058A7
+ 1 0x00000000000000FF
+ 2 0x000000000000807F
+ 3 0x00000000000040BF
+ 4 0x000000000000C03F
+ 5 0x00000000000020DF
+ 6 0x000000000000A05F
+ 7 0x000000000000609F
+ 8 0x000000000000E01F
+ 9 0x00000000000010EF
+ 0 0x000000000000906F
+ on_off 0x000000000000B04F
+ dvd_vcd 0x000000000000F00F
+ tv 0x00000000000008F7
+ os_start 0x00000000000030CF
+ photo 0x00000000000048B7
+ home 0x00000000000044BB
+ back 0x000000000000A857
+ ch+ 0x000000000000B847
+ stop 0x000000000000946B
+ play 0x000000000000C43B
+ vol+ 0x000000000000F807
+ ch- 0x0000000000007887
+ step- 0x000000000000E41B
+ step+ 0x000000000000649B
+ vol- 0x00000000000004FB
+ pause 0x00000000000024DB
+ pre 0x00000000000014EB
+ next 0x000000000000A45B
+ mute 0x000000000000847B
+ rec 0x000000000000D42B
+ subtitle 0x000000000000C837
+ menu 0x00000000000038C7
+ dvd_audio 0x00000000000050AF
+ ui_size 0x0000000000008877
+ ui_on_off 0x00000000000028D7
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005
+#
+# contributed by
+#
+# brand: ASUS
+# model no. of remote control: DigiMatrix Mark 2
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name ASUS_DigiMatrixMk2
+ bits 8
+ flags SPACE_ENC
+ eps 30
+ aeps 100
+
+ header 2666 1378
+ one 260 741
+ zero 260 279
+ ptrail 251
+ pre_data_bits 1
+ pre_data 0x0
+ post_data_bits 8
+ post_data 0x3
+ gap 10826
+ min_repeat 1
+ toggle_bit 0
+
+
+ begin codes
+ power 0x0000000000000084
+ tv_dvr 0x0000000000000044
+ fm 0x00000000000000C4
+ os_start 0x0000000000000024
+ music 0x00000000000000A4
+ pictures 0x0000000000000064
+ video 0x00000000000000E4
+ dvd_menu 0x0000000000000014
+ up 0x000000000000004C
+ down 0x00000000000000E0
+ left 0x0000000000000010
+ right 0x0000000000000040
+ back 0x00000000000000B4
+ ok 0x0000000000000088
+ back_fwd 0x0000000000000074
+ rew 0x0000000000000094
+ play_pause 0x0000000000000054
+ fwd 0x00000000000000D4
+ step- 0x0000000000000098
+ stop 0x0000000000000048
+ step+ 0x0000000000000090
+ vol+ 0x0000000000000058
+ vol- 0x00000000000000D8
+ home 0x00000000000000C8
+ ch+ 0x0000000000000050
+ ch- 0x00000000000000D0
+ mute 0x0000000000000038
+ rec 0x0000000000000028
+ pc 0x0000000000000030
+ 1 0x00000000000000B8
+ 2 0x00000000000000A8
+ 3 0x00000000000000B0
+ 4 0x0000000000000078
+ 5 0x0000000000000068
+ 6 0x0000000000000070
+ 7 0x00000000000000F8
+ 8 0x00000000000000E8
+ 9 0x00000000000000F0
+ 0 0x0000000000000018
+ ui_size 0x0000000000000004
+ repeat 0x0000000000000008
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb
new file mode 100644
index 0000000..4953bf2
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb
@@ -0,0 +1,1259 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004
+#
+# contributed by Paul Miller <pmiller9@users.sourceforge.net>
+#
+# brand: ATI Remote Wonder
+# model no. of remote control: 5000015900A
+# devices being controlled by this remote: ATI USB Receiver
+#
+# CHANNEL CODES
+# To change your channel, hold the hand button down until the
+# LED begins to blink. Then enter the channel number
+# (1 through 16) and press the hand again.
+#
+# NOTE!! The lirc_atiusb driver now removes the channel code
+# from key-codes (by default). This effectively outputs codes
+# for remote channel 1. You can change this behavior by
+# loading the module with unique=1. Type `modinfo lirc_atiusb`
+# for details.
+
+begin remote
+
+ name ATIUSB_5000015900A
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 139944
+ toggle_bit 0
+
+
+ begin codes
+ A 0x000000000000F500
+ B 0x000000000000F601
+ C 0x0000000000000E19
+ D 0x000000000000101B
+ E 0x0000000000001621
+ F 0x0000000000001823
+ TV 0x000000000000F803
+ DVD 0x000000000000F904
+ WEB 0x000000000000FA05
+ BOOK 0x000000000000FB06
+ HAND 0x000000000000FC07
+ POWER 0x000000000000F702
+ MOUSE_LEFT_BTN 0x0000000000006D78
+ MOUSE_RIGHT_BTN 0x000000000000717C
+ MOUSE_UP 0x0000000000006772
+ MOUSE_DOWN 0x0000000000006B76
+ MOUSE_LEFT 0x0000000000006C77
+ MOUSE_RIGHT 0x0000000000006B76
+ VOL_UP 0x000000000000FD08
+ VOL_DOWN 0x000000000000FE09
+ MUTE 0x000000000000FF0A
+ CH_UP 0x000000000000000B
+ CH_DOWN 0x000000000000010C
+ 1 0x000000000000020D
+ 2 0x000000000000030E
+ 3 0x000000000000040F
+ 4 0x0000000000000510
+ 5 0x0000000000000611
+ 6 0x0000000000000712
+ 7 0x0000000000000813
+ 8 0x0000000000000914
+ 9 0x0000000000000A15
+ 0 0x0000000000000C17
+ LIST 0x0000000000000B16
+ CHECK 0x0000000000000D18
+ UP 0x0000000000000F1A
+ DOWN 0x0000000000001722
+ LEFT 0x000000000000121D
+ RIGHT 0x000000000000141F
+ OK 0x000000000000131E
+ TIMER 0x000000000000111C
+ MAX 0x0000000000001520
+ REWIND 0x0000000000001924
+ PLAY 0x0000000000001A25
+ FFWD 0x0000000000001B26
+ REC 0x0000000000001C27
+ STOP 0x0000000000001D28
+ PAUSE 0x0000000000001E29
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
+#
+# contributed by Jason Piterak
+#
+# brand: ATI
+# model no. of remote control: 5000022000
+#
+# devices being controlled by this remote:
+# MythTV PVR using knopmyth by Cecil and Dale at
+# http://mysettopbox.tv
+# Key map names are as per ATI's website:
+# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
+# Feel free to change them as you see fit :-)
+#
+# NOTE: There are 16 channels for this remote; this file only
+# supports one channel. See the GATOS project for information
+# on how to change the channel. Not tested. Unknown channel.
+#
+# also reported by Jeffrey Barnhill to work with model 5000023600 while
+# the dedicated section below did not work
+
+begin remote
+
+ name ATIUSB_5000022000
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0000
+ gap 139891
+ toggle_bit 0
+
+
+ begin codes
+ a 0x000000000000C500
+ b 0x000000000000C601
+ power 0x000000000000C702
+ tv 0x000000000000C803
+ dvd 0x000000000000C904
+ web 0x000000000000CA05
+ media_library 0x000000000000CB06
+ drag 0x000000000000CC07
+ mouse-button_left 0x0000000000003D78
+ mouse-button_right 0x000000000000417C
+ mouse-up 0x0000000000003772
+ mouse-down 0x0000000000003873
+ mouse-left 0x0000000000003570
+ mouse-right 0x0000000000003671
+ mouse-left_up 0x0000000000003974
+ mouse-right_up 0x0000000000003A75
+ mouse-left_down 0x0000000000003C77
+ mouse-right_down 0x0000000000003B76
+ vol-up 0x000000000000CD08
+ vol-down 0x000000000000CE09
+ mute 0x000000000000CF0A
+ chan-up 0x000000000000D00B
+ chan-down 0x000000000000D10C
+ 1 0x000000000000D20D
+ 2 0x000000000000D30E
+ 3 0x000000000000D40F
+ 4 0x000000000000D510
+ 5 0x000000000000D611
+ 6 0x000000000000D712
+ 7 0x000000000000D813
+ 8 0x000000000000D914
+ 9 0x000000000000DA15
+ 0 0x000000000000DC17
+ dvd-root_menu 0x000000000000DB16
+ launch_setup 0x000000000000DD18
+ c 0x000000000000DE19
+ d 0x000000000000E01B
+ tv_on_demand 0x000000000000E11C
+ max_window 0x000000000000E520
+ cursor-up 0x000000000000DF1A
+ cursor-down 0x000000000000E722
+ cursor-left 0x000000000000E21D
+ cursor-right 0x000000000000E41F
+ ok 0x000000000000E31E
+ e 0x000000000000E621
+ f 0x000000000000E823
+ rewind 0x000000000000E924
+ play 0x000000000000EA25
+ fast_forward 0x000000000000EB26
+ record 0x000000000000EC27
+ stop 0x000000000000ED28
+ pause 0x000000000000EE29
+ end codes
+
+end remote
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004
+#
+# contributed by Jurgen Kramer
+#
+# brand: ATI
+# model no. of remote control: 5000023600
+# devices being controlled by this remote: MythTV 0.14
+#
+# USB ID: 0bc7:0004
+#
+
+begin remote
+
+ name ATIUSB_5000023600
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 227972
+ min_repeat 4
+ toggle_bit 0
+
+
+ begin codes
+ 1 0x000000000000920D
+ 2 0x000000000000930E
+ 3 0x000000000000940F
+ 4 0x0000000000009510
+ 5 0x0000000000009611
+ 6 0x0000000000009712
+ 7 0x0000000000009813
+ 8 0x0000000000009914
+ 9 0x0000000000009A15
+ a 0x0000000000008500
+ b 0x0000000000008601
+ power 0x0000000000008702
+ tv 0x0000000000008803
+ dvd 0x0000000000008904
+ web 0x0000000000008A05
+ media_library 0x0000000000008B06
+ drag 0x0000000000008C07
+ 0 0x0000000000009C17
+ c 0x0000000000009E19
+ d 0x000000000000A01B
+ mute 0x0000000000008F0A
+ tv_on_demand 0x000000000000A11C
+ max_window 0x000000000000A520
+ e 0x000000000000A621
+ f 0x000000000000A823
+ ok 0x000000000000A31E
+ left 0x000000000000A21D
+ right 0x000000000000A41F
+ up 0x0000000000009F1A
+ down 0x000000000000A722
+ rewind 0x000000000000A924
+ play 0x000000000000AA25
+ forward 0x000000000000AB26
+ record 0x000000000000AC27
+ stop 0x000000000000AD28
+ pause 0x000000000000AE29
+ mouse_button_left 0x000000000000FD78
+ mouse_button_right 0x000000000000017C
+ vol-down 0x0000000000008E09
+ vol-up 0x0000000000008D08
+ chan-down 0x000000000000910C
+ chan-up 0x000000000000900B
+ mouse-up 0x000000000000F772
+ mouse-down 0x000000000000F873
+ mouse-left 0x000000000000F570
+ mouse-right 0x000000000000F671
+ mouse-left_up 0x000000000000F974
+ mouse-left_down 0x000000000000FC77
+ mouse-right_up 0x000000000000FA75
+ mouse-right_down 0x000000000000FB76
+ dvd-root_menu 0x0000000000009B16
+ launch_setup 0x0000000000009D18
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005
+#
+# contributed by Rapha�l Doursenaud (rdoursenaud@free.fr)
+#
+# brand: Sapphire (ATI)
+# model no. of remote control: 5000023600
+# devices being controlled by this remote: xmms, tvtime
+#
+
+begin remote
+
+ name SAPPHIRE_ATIUSB_5000023600
+ bits 40
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 227990
+ toggle_bit 0
+
+
+ begin codes
+ 1 0x00000014E20D0000
+ 2 0x00000014E30E0000
+ 3 0x00000014E40F0000
+ 4 0x00000014E5100000
+ 5 0x00000014E6110000
+ 6 0x00000014E7120000
+ 7 0x00000014E8130000
+ 8 0x00000014E9140000
+ 9 0x00000014EA150000
+ a 0x00000014D5000000
+ b 0x00000014D6010000
+ power 0x00000014D7020000
+ tv 0x00000014D8030000
+ dvd 0x00000014D9040000
+ web 0x00000014DA050000
+ media_library 0x00000014DB060000
+ drag 0x00000014DC070000
+ 0 0x00000014EC170000
+ c 0x00000014EE190000
+ d 0x00000014F01B0000
+ mute 0x00000014DF0A0000
+ tv_on_demand 0x00000014F11C0000
+ max_window 0x00000014F5200000
+ e 0x00000014F6210000
+ f 0x00000014F8230000
+ ok 0x00000014F31E0000
+ left 0x00000014F21D0000
+ right 0x00000014F41F0000
+ up 0x00000014EF1A0000
+ down 0x00000014F7220000
+ rewind 0x00000014F9240000
+ play 0x00000014FA250000
+ forward 0x00000014FB260000
+ record 0x00000014FC270000
+ stop 0x00000014FD280000
+ pause 0x00000014FE290000
+ mouse_button_left 0x000000144D780000
+ mouse_button_right 0x00000014517C0000
+ vol-down 0x00000014DE090000
+ vol-up 0x00000014DD080000
+ chan-down 0x00000014E10C0000
+ chan-up 0x00000014E00B0000
+ mouse-up 0x0000001447720000
+ mouse-down 0x0000001448730000
+ mouse-left 0x0000001445700000
+ mouse-right 0x0000001446710000
+ mouse-left_up 0x0000001449740000
+ mouse-left_down 0x000000144C770000
+ mouse-right_up 0x000000144A750000
+ mouse-right_down 0x000000144B760000
+ dvd-root_menu 0x00000014EB160000
+ launch_setup 0x00000014ED180000
+ end codes
+
+end remote
+
+
+# lircd.conf for X-10 Lola remote
+#
+# this config file was automatically generated
+# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004
+# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc
+#
+#
+# brand: X-10 Lola
+# model no. of remote control: UR89A
+# devices being controlled by this remote: mythtv
+#
+
+begin remote
+
+ name X-10_Lola
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 219972
+ toggle_bit 0
+
+
+ begin codes
+ up 0x000000000000600B
+ down 0x000000000000610C
+ left 0x0000000000005D08
+ right 0x0000000000005E09
+ M 0x0000000000005F0A
+ 1 0x000000000000620D
+ 2 0x000000000000630E
+ 3 0x000000000000640F
+ 4 0x0000000000006510
+ 5 0x0000000000006611
+ 6 0x0000000000006712
+ 7 0x0000000000006813
+ 8 0x0000000000006914
+ 9 0x0000000000006A15
+ 0 0x0000000000006C17
+ a-d 0x0000000000006B16
+ a-b 0x0000000000006D18
+ pageup 0x000000000000711C
+ pagedown 0x0000000000007520
+ T 0x000000000000832E
+ E 0x000000000000842F
+ F 0x0000000000005C07
+ S 0x0000000000008530
+ scan- 0x000000000000802B
+ rew 0x0000000000007924
+ play 0x0000000000007A25
+ ff 0x0000000000007B26
+ scan+ 0x0000000000007F2A
+ rec 0x0000000000007C27
+ stop 0x0000000000007D28
+ pause 0x0000000000007E29
+ playlist 0x0000000000005601
+ playing 0x000000000000822D
+ enter 0x000000000000731E
+ eu 0x0000000000006F1A
+ ed 0x0000000000007722
+ el 0x000000000000721D
+ er 0x000000000000741F
+ alb 0x0000000000006E19
+ art 0x000000000000701B
+ gen 0x0000000000007621
+ trk 0x0000000000007823
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004
+#
+# contributed by Julien Damon
+#
+# brand: microapp6in1
+# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184
+# distributed in France
+# model no. of remote control: 4184(UR86E)
+# devices being controlled by this remote:
+
+#
+# sold by Pearl as Q-Sonic Master Remote 6in1 PC
+#
+
+begin remote
+
+ name microapp6in1
+ bits 40
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 203993
+ toggle_bit 0
+
+
+ begin codes
+ num_1 0x00000020EE11820D
+ num_2 0x00000020EE11420D
+ num_3 0x00000020EE11C20D
+ num_4 0x00000020EE11220D
+ num_5 0x00000020EE11A20D
+ num_6 0x00000020EE11620D
+ num_7 0x00000020EE11E20D
+ num_8 0x00000020EE11120D
+ num_9 0x00000020EE11920D
+ num_0 0x00000020EE11020D
+ AV 0x00000020EE11BA05
+ ok 0x00000020EE11520D
+ up 0x00000020EE11D50A
+ left 0x00000020EE11D20D
+ right 0x00000020EE11D10E
+ down 0x00000020EE11D30C
+ exit 0x00000020EE11C906
+ menu 0x00000020EE11B609
+ mute 0x00000020EE11A00F
+ vol+ 0x00000020EE11600F
+ vol- 0x00000020EE11E00F
+ ch+ 0x00000020EE11400F
+ ch- 0x00000020EE11C00F
+ hand 0x00000014307B0000
+ skip_left 0x00000020EE113A05
+ skip_right 0x00000020EE11D807
+ play 0x00000020EE11B00F
+ backward 0x00000020EE113807
+ forward 0x00000020EE11B807
+ pause 0x00000020EE11720D
+ stop 0x00000020EE11FF00
+ record 0x00000020EE11700F
+ clic_left 0x000000142D780000
+ clic_right 0x00000014317C0000
+ mouse_up 0x0000001427720000
+ mouse_down 0x0000001428730000
+ mouse_right 0x0000001426710000
+ mouse_left 0x0000001425700000
+ mouse_up_right 0x000000142A750000
+ mouse_down_right 0x000000142B760000
+ mouse_up_left 0x0000001429740000
+ mouse_down_left 0x000000142C770000
+ power 0x00000020EE11F00F
+# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC
+ leftbtn_up 0x000000142e790000
+ rightbtn_up 0x00000014327d0000
+ pc 0x00000020ee11d40b
+
+ end codes
+
+end remote
+
+
+# this config file was automatically generated
+# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004
+#
+# contributed by Martin Tomasek <mtd@centrum.cz>
+#
+# brand: ATI Remote Wonder
+# model no. of remote control:
+# devices being controlled by this remote: ATI USB Receiver (X10).
+#
+# * remote is set to channel 1, driver reports channel 16. don't know
+# which is true.
+
+#
+# P: Vendor=0bc7 ProdID=0004 Rev= 1.00
+# S: Manufacturer=X10 Wireless Technology Inc
+# S: Product=USB Receiver
+#
+
+begin remote
+
+ name atiusb_ch1
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 227933
+ toggle_bit 0
+
+
+ begin codes
+ A 0x000000000000D500
+ B 0x000000000000D601
+ C 0x000000000000EE19
+ D 0x000000000000F01B
+ E 0x000000000000F621
+ F 0x000000000000F823
+ POWER 0x000000000000D702
+ TV 0x000000000000D803
+ DVD 0x000000000000D904
+ WEB 0x000000000000DA05
+ BOOK 0x000000000000DB06
+ HAND 0x000000000000DC07
+ MOUSE_LEFT_BTN 0x0000000000004D78
+ MOUSE_RIGHT_BTN 0x000000000000517C
+ MOUSE_LEFT 0x0000000000004570
+ MOUSE_RIGHT 0x0000000000004671
+ MOUSE_UP 0x0000000000004772
+ MOUSE_DOWN 0x0000000000004873
+ VOL_UP 0x000000000000DD08
+ VOL_DOWN 0x000000000000DE09
+ MUTE 0x000000000000DF0A
+ CH_UP 0x000000000000E00B
+ CH_DOWN 0x000000000000E10C
+ 1 0x000000000000E20D
+ 2 0x000000000000E30E
+ 3 0x000000000000E40F
+ 4 0x000000000000E510
+ 5 0x000000000000E611
+ 6 0x000000000000E712
+ 7 0x000000000000E813
+ 8 0x000000000000E914
+ 9 0x000000000000EA15
+ 0 0x000000000000EC17
+ LIST 0x000000000000EB16
+ CHECK 0x000000000000ED18
+ UP 0x000000000000EF1A
+ DOWN 0x000000000000F722
+ LEFT 0x000000000000F21D
+ RIGHT 0x000000000000F41F
+ OK 0x000000000000F31E
+ TIMER 0x000000000000F11C
+ MAXIMIZE 0x000000000000F520
+ REW 0x000000000000F924
+ FFWD 0x000000000000FB26
+ PLAY 0x000000000000FA25
+ STOP 0x000000000000FD28
+ RECORD 0x000000000000FC27
+ PAUSE 0x000000000000FE29
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004
+#
+# contributed by Phil Speights
+#
+# brand: nvidia
+# model no. of remote control: UR88A
+# devices being controlled by this remote: nvidia personal cinema
+#
+
+begin remote
+
+ name ATIUSB_UR88A
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 243948
+ toggle_bit 0
+
+
+ begin codes
+ mouse-up 0x4A75
+ mouse-right_up 0x4A75
+ mouse-right 0x4671
+ mouse-right_down 0x4B76
+ mouse-down 0x4B76
+ mouse-left_down 0x4873
+ mouse-left 0x4C77
+ mouse-left_up 0x4772
+ esc 0xDF0A
+ mouse-button_left 0x4D78
+ mouse-button_right 0x517C
+ 1 0xE20D
+ 2 0xE30E
+ 3 0xE40F
+ 4 0xE510
+ 5 0xE611
+ 6 0xE712
+ 7 0xE813
+ 8 0xE914
+ 9 0xEA15
+ 0 0xEC17
+ stop 0xFD28
+ play 0xFA25
+ fastfoward 0xFB26
+ rewind 0xF924
+ pause 0xFE29
+ record 0xFC27
+ previous 0xF621
+ next 0xF823
+ up 0xEF1A
+ down 0xF722
+ right 0xF41F
+ left 0xF21D
+ web 0xDC07
+ music 0xDB06
+ photo 0xDA05
+ dvd/vcd 0xD904
+ dvr 0xD803
+ mute 0xD500
+ playlist 0xD601
+ chsurf 0xD702
+ dvdmenu 0xEE19
+ txt 0xEB16
+ snapshots 0xED18
+ setup 0xF01B
+ audio 0xF11C
+ slow 0xF520
+ ok 0xF31E
+ vol+ 0xDE09
+ vol- 0xDD08
+ chan- 0xE10C
+ chan+ 0xE00B
+ zoom 0xFF2A
+ angle 0x002B
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005
+#
+# contributed by Dirk Aust
+#
+# brand: Medion, Made by X10, China
+# Remote P/N: 20016398
+# Receiver P/N: 20016397
+#
+# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC
+
+begin remote
+
+ name Medion
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 139873
+ toggle_bit 0
+
+
+ begin codes
+ TV 0x012C
+ VCR 0x022D
+ DVD 0xD904
+ MUSIC 0xDB06
+ RADIO 0x032E
+ PHOTO 0xDA05
+ TV_PREVIEW 0x042F
+ CHANNEL_LIST 0x0530
+ SETUP 0xF01B
+ VIDEO_DESKTOP 0x0631
+ CHAN+ 0xE00B
+ VOL- 0xDD08
+ MUTE 0xD500
+ VOL+ 0xDE09
+ CHAN- 0xE10C
+ RED 0x0732
+ GREEN 0x0833
+ YELLOW 0x0934
+ BLUE 0x0A35
+ TXT 0xEB16
+ 1 0xE20D
+ 2 0xE30E
+ 3 0xE40F
+ 4 0xE510
+ 5 0xE611
+ 6 0xE712
+ 7 0xE813
+ 8 0xE914
+ 9 0xEA15
+ TV/RADIO 0xF11C
+ 0 0xEC17
+ DELETE 0xF520
+ RENAME 0x0B36
+ SNAPSHOT 0xED18
+ UP 0xEF1A
+ LEFT 0xF21D
+ OK 0xF31E
+ RIGHT 0xF41F
+ DOWN 0xF722
+ ACQ_IMAGE 0x0C37
+ EDIT_IMAGE 0x0D38
+ REW 0xF924
+ PLAY 0xFA25
+ FFW 0xFB26
+ RECORD 0xFC27
+ STOP 0xFD28
+ PAUSE 0xFE29
+ PREV 0xF621
+ FULL 0x0E39
+ NEXT 0xF823
+ DVD_MENU 0xEE19
+ DVD_AUDIO 0x0F3A
+ POWER 0xD702
+ end codes
+
+end remote
+
+
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
+#
+# contributed by Steffen <starv-lirc@juniks.org>
+#
+# brand: ATI Sapphire Remote Bob II USB
+# model no. of remote control: 5000024400
+# devices being controlled by this remote: ASUS Digimatrix MythTV PVR
+#
+
+begin remote
+
+ name 5000024400
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x0
+ post_data_bits 16
+ post_data 0x0
+ gap 299851
+ toggle_bit 0
+
+
+ begin codes
+ aux1 0x023F
+ aux2 0x023F
+ aux3 0x023F
+ aux4 0x023F
+ leftmouse 0x02A9
+ rightmouse 0x02AA
+ a 0x0278
+ b 0x0279
+ power 0x020C
+ dvd 0x0238
+ tv 0x0239
+ help 0x02BE
+ pc 0x023F
+ resize 0x02D5
+ hand 0x02D0
+ ati 0x028E
+ vol-up 0x0210
+ vol-down 0x0211
+ mute 0x020D
+ chan-up 0x0220
+ chan-down 0x0221
+ mouse-up 0x013F
+ mouse-down 0x013F
+ mouse-left 0x013F
+ mouse-right 0x013F
+ 1 0x0201
+ 2 0x0202
+ 3 0x0203
+ 4 0x0204
+ 5 0x0205
+ 6 0x0206
+ 7 0x0207
+ 8 0x0208
+ 9 0x0209
+ 0 0x0200
+ list 0x0254
+ check 0x0282
+ info 0x02F9
+ timer 0x0296
+ up 0x0258
+ left 0x025A
+ right 0x025B
+ down 0x0259
+ ok 0x025C
+ c 0x017A
+ d 0x027B
+ play 0x022C
+ e 0x027C
+ f 0x027D
+ rewind 0x0229
+ rec 0x0237
+ stop 0x0231
+ pause 0x0230
+ ffwd 0x0228
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005
+#
+# contributed by
+#
+# brand: Niveus
+# model no. of remote control:
+# devices being controlled by this remote: Niveus X10
+#
+
+begin remote
+
+ name Niveus_X10
+ bits 40
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 203974
+ toggle_bit 0
+
+
+ begin codes
+ power 0x00000020EE11F00F
+ mouse-up 0x0000001447720000
+ mouse-down 0x0000001448730000
+ mouse-left 0x0000001445700000
+ mouse-right 0x0000001446710000
+ mouse-up-left 0x0000001449740000
+ mouse-up-right 0x000000144A750000
+ mouse-down-left 0x000000144C770000
+ mouse-down-right 0x000000144B760000
+ mouse-left-click 0x000000144D780000
+ mouse-right-click 0x00000014517C0000
+ mouse-drag 0x00000014507B0000
+ vol- 0x00000020EE01E00F
+ vol+ 0x00000020EE81600F
+ ch- 0x00000020EEE1C00F
+ ch+ 0x00000020EE61400F
+ mute 0x00000020EEC1A00F
+ 1 0x00000020EEA1820D
+ 2 0x00000020EE61420D
+ 3 0x00000020EEE1C20D
+ 4 0x00000020EE41220D
+ 5 0x00000020EEC1A20D
+ 6 0x00000020EE81620D
+ 7 0x00000020EE01E20D
+ 8 0x00000020EE31120D
+ 9 0x00000020EEB1920D
+ ent 0x00000020EE71520D
+ 0 0x00000020EE21020D
+ a-b 0x00000020EED1BA05
+ a 0x00000020EE513A05
+ b 0x00000020EEF1D807
+ c 0x00000020EEF1D609
+ d 0x00000020EEF1D906
+ menu 0x00000020EED1B609
+ exit 0x00000020EEE1C906
+ up 0x00000020EEF1D50A
+ down 0x00000020EEF1D30C
+ left 0x00000020EEF1D20D
+ right 0x00000020EEF1D10E
+ ok 0x00000020EE71520D
+ rew 0x00000020EE513807
+ play 0x00000020EED1B00F
+ ff 0x00000020EED1B807
+ rec 0x00000020EE11FF00
+ stop 0x00000020EE91700F
+ pause 0x00000020EE91720D
+ end codes
+
+end remote
+#
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005
+#
+# contributed by
+#
+# brand: Medion
+# model no. of remote control: MD1 NBC remote
+# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb
+#
+
+begin remote
+
+ name Medion_MD1
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 219994
+ min_repeat 27
+ toggle_bit 0
+
+
+ begin codes
+ Power 0x000000000000D702
+ TV 0x000000000000012C
+ Video 0x00000000000082AD
+ CD/DVD 0x000000000000D904
+ Teletext 0x0000000000006B96
+ Audio 0x000000000000DB06
+ Radio 0x00000000000083AE
+ Page 0x0000000000000631
+ Photo 0x0000000000005A85
+ Info 0x000000000000042F
+ Menu 0x0000000000006E99
+ Back 0x000000000000F520
+ Wheel_Up 0x000000000000CDF8
+ Wheel_Down 0x000000000000C7F2
+ Wheel_Left 0x000000000000F21D
+ Wheel_Right 0x000000000000749F
+ Wheel_Click 0x000000000000F31E
+ Vol+ 0x000000000000DE09
+ Vol- 0x0000000000005D88
+ Mute 0x000000000000D500
+ Program+ 0x000000000000608B
+ Program- 0x000000000000E10C
+ Prog_Switch 0x000000000000719C
+ Select 0x000000000000F01B
+ Red 0x00000000000087B2
+ Green 0x0000000000000833
+ Yellow 0x00000000000089B4
+ Blue 0x0000000000000A35
+ Stop 0x0000000000007DA8
+ Pause 0x000000000000FE29
+ Play 0x0000000000007AA5
+ Skip_Left 0x000000000000F621
+ Camera 0x0000000000006D98
+ Skip_Right 0x000000000000F823
+ Fast_Reverse 0x00000000000079A4
+ Fast_Forward 0x000000000000FB26
+ 1 0x000000000000628D
+ 2 0x000000000000E30E
+ 3 0x000000000000648F
+ 4 0x000000000000E510
+ 5 0x0000000000006691
+ 6 0x000000000000E712
+ 7 0x0000000000006893
+ 8 0x000000000000E914
+ 9 0x0000000000006A95
+ 0 0x000000000000EC17
+ Record 0x000000000000FC27
+ end codes
+
+end remote
+
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005
+#
+# contributed by a_matteur
+#
+# brand: MEDION X10 RF
+# model no. of remote control: remote P/N:20014752, receiver P/N:20014751
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name MEDION_X10_RF
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x14
+ post_data_bits 16
+ post_data 0x0
+ gap 235923
+ toggle_bit 0
+
+
+ begin codes
+ tv 0x012C
+ vcr 0x022D
+ dvd 0x0904
+ music 0x0B06
+ radio 0x032E
+ photo 0x0A05
+ tvpreview 0x042F
+ channellist 0x0530
+ setup 0x001B
+ videodesktop 0x0631
+ ch+ 0x000B
+ ch- 0x010C
+ vol+ 0x0E09
+ vol- 0x0D08
+ mute 0x0500
+ red 0x0732
+ green 0x0833
+ yellow 0x0934
+ blue 0x0A35
+ txt 0x0B16
+ 0 0x0C17
+ 1 0x020D
+ 2 0x030E
+ 3 0x040F
+ 4 0x0510
+ 5 0x0611
+ 6 0x0712
+ 7 0x0813
+ 8 0x0914
+ 9 0x0A15
+ tvradio 0x011C
+ delete 0x0520
+ rename 0x0B36
+ snapshot 0x0D18
+ up 0x0F1A
+ down 0x0722
+ left 0x021D
+ right 0x041F
+ ok 0x031E
+ acquireimage 0x0C37
+ editimage 0x0D38
+ play 0x0A25
+ pause 0x0E29
+ stop 0x0D28
+ forward 0x0B26
+ rewind 0x0924
+ next 0x0823
+ prev 0x0621
+ record 0x0C27
+ fullscreen 0x0E39
+ dvdmenu 0x0E19
+ dvdaudio 0x0F3A
+ power 0x0702
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005
+#
+# contributed by: Peter J. Weyers <lirc(a)usr-local.de>
+#
+# brand: MEDION / ATI
+# model no. of remote control: 40005927
+# devices being controlled by this remote:
+#
+# This is an USB attached reciever wich works by radio, not by IR. It is
+# most probably a relabeled ATI X10 device and sold together with the
+# Medion Notebook MD41300. It works with the lirc_atiusb driver while the
+# ati_remote module is NOT(!) loaded
+
+begin remote
+
+ name MEDION_40005927
+ bits 40
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 227972
+ toggle_bit 0
+
+
+ begin codes
+ TV_DVD 0x1481AC0000
+ VIDEO 0x1482AD0000
+ PHOTO 0x1459840000
+ MUSIC 0x145B860000
+ PC 0x1483AE0000
+ MUTE 0x1455800000
+ OK 0x14739E0000
+ UP 0x146F9A0000
+ DOWN 0x1477A20000
+ LEFT 0x14729D0000
+ RIGHT 0x14749F0000
+ CH+ 0x145E890000
+ CH- 0x145D880000
+ VOL+ 0x14608B0000
+ VOL- 0x14618C0000
+ PLAY_PAUSE 0x147AA50000
+ RECORD 0x147CA70000
+ STOP 0x147DA80000
+ FRWND 0x1479A40000
+ FFWD 0x147BA60000
+ PREV 0x1476A10000
+ NEXT 0x1478A30000
+ 1 0x14628D0000
+ 2 0x14638E0000
+ 3 0x14648F0000
+ 4 0x1465900000
+ 5 0x1466910000
+ 6 0x1467920000
+ 7 0x1468930000
+ 8 0x1469940000
+ 9 0x146A950000
+ 0 0x146C970000
+ RC 0x1484AF0000
+ Screen_Symbol 0x146B960000
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006
+#
+# contributed by
+#
+# brand: Medion USB Remote Control X10
+# model no. of remote control: 40009936
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name Medion_X10
+ bits 40
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 219969
+ toggle_bit 0
+
+
+ begin codes
+ off 0x14D7020000
+ tv 0x14012C0000
+ video 0x1482AD0000
+ dvd 0x14D9040000
+ vt 0x146B960000
+ audio 0x14DB060000
+ radio 0x1483AE0000
+ book 0x1406310000
+ photo 0x145A850000
+ info 0x14042F0000
+ 0 0x146C970000
+ 1 0x14E20D0000
+ 2 0x14638E0000
+ 3 0x14E40F0000
+ 4 0x1465900000
+ 5 0x14E6110000
+ 6 0x1467920000
+ 7 0x1468930000
+ 8 0x14E9140000
+ 9 0x146A950000
+ ok 0x14F31E0000
+ up 0x14CDF80000
+ down 0x1446710000
+ left 0x14F21D0000
+ right 0x14749F0000
+ menu 0x14EE190000
+ back 0x1475A00000
+ red 0x1407320000
+ green 0x1488B30000
+ yellow 0x1409340000
+ blue 0x148AB50000
+ mute 0x14D5000000
+ ch+ 0x14608B0000
+ ch- 0x14E10C0000
+ vol+ 0x145E890000
+ vol- 0x14DD080000
+ switch 0x14719C0000
+ stop 0x14FD280000
+ pause 0x147EA90000
+ play 0x14FA250000
+ reward 0x1476A10000
+ forward 0x14F8230000
+ skipr 0x1479A40000
+ skipf 0x14FB260000
+ rec 0x147CA70000
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia
new file mode 100644
index 0000000..7091aa4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia
@@ -0,0 +1,72 @@
+#
+# This is for the remote that Avermedia bundles with its TVCapture and
+# TVPhone, the classic ones (pre 98).
+# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes
+# lirc's job easy. You need at least lirc-0.6.3 to use this config file
+#
+# this config file was automatically generated
+# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001
+#
+# contributed by Santiago Garcia Mantinan <manty@i.am>
+#
+# brand: Avermedia
+# model: TVCapture & TVPhone, the classic ones (pre 98)
+# supported devices: This remote control comes with some TV Tuner cards from
+# Avermedia.
+
+begin remote
+
+ name Avermedia
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 8984 4527
+ one 568 1681
+ zero 568 558
+ ptrail 547
+ repeat 8985 2276
+ pre_data_bits 16
+ pre_data 0x2FD
+ gap 108069
+ toggle_bit 0
+
+
+ begin codes
+ TV 0x0000000000006897
+ FM 0x000000000000A857
+ EXIT 0x00000000000048B7
+ DISPLAY 0x00000000000030CF
+ FREEZE 0x00000000000028D7
+ CAPTURE 0x0000000000008877
+ VIDEO 0x00000000000038C7
+ 1 0x000000000000807F
+ 2 0x00000000000040BF
+ 3 0x000000000000C03F
+ AUDIO 0x00000000000018E7
+ 4 0x00000000000020DF
+ 5 0x000000000000A05F
+ 6 0x000000000000609F
+ FULLSCREEN 0x000000000000F00F
+ 7 0x000000000000E01F
+ 8 0x00000000000010EF
+ 9 0x000000000000906F
+ LOOP 0x000000000000C837
+ 0 0x00000000000050AF
+ LEFTARROW 0x00000000000000FF
+ RIGHTARROW 0x000000000000E817
+ MUTE 0x00000000000008F7
+ COLOR 0x000000000000B04F
+ PREVIEW 0x000000000000708F
+ CHANNELUP 0x000000000000D827
+ VOL_UP 0x00000000000058A7
+ AUTOSCAN 0x000000000000B847
+ ENTER 0x0000000000009867
+ CHANNELDOWN 0x000000000000F807
+ VOL_DOWN 0x0000000000007887
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98
new file mode 100644
index 0000000..f60ee50
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98
@@ -0,0 +1,175 @@
+#
+# this config file was automatically generated
+# using lirc-0.5.5 on Thu May 25 18:00:24 2000
+#
+# contributed by Michal Kochanowicz & Jesus Bravo Alvarez
+#
+# brand: AVerMedia
+# model: ?
+# supported devices: some TVCapture98 (ID 0x00021461) and
+# some TVPhone98 (ID 0x00011461) cards
+
+begin remote
+
+ name TVCapture98
+ bits 6
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9078 4437
+ one 615 1631
+ zero 615 515
+ ptrail 620
+# pre_data_bits 16
+# pre_data 0x40BF
+ repeat 9080 2189
+ gap 108056
+ repeat_bit 0
+
+ begin codes
+ TV/FM 0x0000000000000023
+ CD 0x0000000000000022
+# TELETEXT 0x000000000000C03F
+ POWER 0x0000000000000027
+
+ 1 0x0000000000000018
+ 2 0x0000000000000010
+ 3 0x0000000000000008
+ VIDEO 0x0000000000000000
+
+ 4 0x0000000000000019
+ 5 0x0000000000000011
+ 6 0x0000000000000009
+ AUDIO 0x0000000000000001
+
+ 7 0x000000000000001A
+ 8 0x0000000000000012
+ 9 0x000000000000000A
+ FULLSCREEN 0x0000000000000002
+
+ 0 0x000000000000001B
+ DISPLAY 0x0000000000000013
+ COLOR 0x000000000000000B
+ LOOP 0x0000000000000003
+
+ UNLABELED 0x000000000000001C
+ LEFT 0x0000000000000014
+ RIGHT 0x000000000000000C
+ PREVIEW 0x0000000000000004
+
+ AUTOSCAN 0x000000000000001D
+ FREEZE 0x0000000000000015
+ CAPTURE 0x000000000000000D
+ MUTE 0x0000000000000005
+
+ RED 0x000000000000001E
+ VOL_DOWN 0x0000000000000016
+ VOL_UP 0x000000000000000E
+ YELLOW 0x0000000000000006
+
+ GREEN 0x000000000000001F
+ CH_DOWN 0x0000000000000017
+ CH_UP 0x000000000000000F
+ BLUE 0x0000000000000007
+ end codes
+
+end remote
+
+#
+# this config file was automatically generated
+# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000
+#
+# contributed by Christoph Bartelmus <lirc@bartelmus.de>
+#
+# brand: AVerMedia
+# model: ? (36 buttons)
+# supported devices: TVPhone98 card (ID 0x00031461)
+# TVCapture98 card (ID 0x00041461)
+#
+# This config file does work with both homebrew receivers and
+# original AVerMedia TV cards !!!
+#
+
+begin remote
+
+ name TVPhone98
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9078 4437
+ one 615 1631
+ zero 615 515
+ ptrail 620
+ repeat 9080 2189
+ pre_data_bits 16
+ pre_data 0x40BF
+ gap 108056
+ repeat_bit 0
+
+ begin codes
+ POWER 0x00000000000000FF
+ TV/FM 0x000000000000807F
+ CD 0x00000000000040BF
+ TELETEXT 0x000000000000C03F
+ VIDEO 0x00000000000020DF
+ 1 0x000000000000A05F
+ 2 0x000000000000609F
+ 3 0x000000000000E01F
+ AUDIO 0x00000000000010EF
+ 4 0x000000000000906F
+ 5 0x00000000000050AF
+ 6 0x000000000000D02F
+ FULLSCREEN 0x00000000000030CF
+ 7 0x000000000000B04F
+ 8 0x000000000000708F
+ 9 0x000000000000F00F
+
+ PREVIEW 0x00000000000008F7
+ 0 0x0000000000008877
+ DISPLAY 0x00000000000048B7
+ LOOP 0x000000000000C837
+ MUTE 0x00000000000028D7
+ AUTOSCAN 0x000000000000A857
+ FREEZE 0x0000000000006897
+ CAPTURE 0x000000000000E817
+ PLAY 0x00000000000018E7
+ RECORD 0x0000000000009867
+ PAUSE 0x00000000000058A7
+ STOP 0x000000000000D827
+ YELLOW 0x00000000000038C7
+ RED 0x000000000000B847
+ VOL_DOWN 0x0000000000007887
+ VOL_UP 0x000000000000F807
+ end codes
+
+end remote
+
+begin remote
+
+ name TVPhone98_ext
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9078 4437
+ one 615 1631
+ zero 615 515
+ ptrail 620
+ repeat 9080 2189
+ pre_data_bits 16
+ pre_data 0xC03F
+ gap 108056
+ repeat_bit 0
+
+ begin codes
+ BLUE 0x00000000000000FF
+ GREEN 0x000000000000807F
+ CH_DOWN 0x00000000000040BF
+ CH_UP 0x000000000000C03F
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate
new file mode 100644
index 0000000..36b1c6b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate
@@ -0,0 +1,61 @@
+#
+# this config file was automatically generated
+# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002
+#
+# contributed by
+#
+# brand: AVerMedia
+# model:
+# supported devices: VDOMATE (ID 0x3001461)
+#
+
+begin remote
+
+ name hanircd
+ bits 32
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9086 4425
+ one 625 1624
+ zero 625 500
+ ptrail 624
+ repeat 9087 2185
+ gap 107977
+ toggle_bit 0
+
+
+ begin codes
+ power 0x0000000040BF00FF
+ one 0x0000000040BFA05F
+ two 0x0000000040BF609F
+ three 0x0000000040BFE01F
+ four 0x0000000040BF906F
+ five 0x0000000040BF50AF
+ six 0x0000000040BFD02F
+ seven 0x0000000040BFB04F
+ eight 0x0000000040BF708F
+ nine 0x0000000040BFF00F
+ zero 0x0000000040BF8877
+ video 0x0000000040BF20DF
+ fullscreen 0x0000000040BF30CF
+ display 0x0000000040BF48B7
+ color 0x0000000040BFC837
+ loop 0x0000000040BF08F7
+ coloup 0x0000000040BF6897
+ colordn 0x0000000040BFE817
+ preview 0x0000000040BF28D7
+ autoscan 0x0000000040BF9867
+ freeze 0x0000000040BF58A7
+ capture 0x0000000040BFD827
+ mute 0x0000000040BF18E7
+ volumeup 0x0000000040BF7887
+ volumedown 0x0000000040BFF807
+ chnldown 0x00000000C03F40BF
+ chnlup 0x00000000C03FC03F
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia
new file mode 100644
index 0000000..e950862
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia
@@ -0,0 +1,33 @@
+#
+# lircmd config file
+#
+
+#PROTOCOL IntelliMouse
+PROTOCOL MouseSystems
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * FM
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+
+# These are lircmd-0.5.5 extensions
+MOVE_IN * VOLUP
+MOVE_OUT * VOLDOWN
+
+BUTTON1_CLICK * DISPLAY
+BUTTON2_CLICK * FREEZE
+BUTTON3_CLICK * CAPTURE
+
+BUTTON1_TOGGLE * AUDIO
+BUTTON2_TOGGLE * FULLSCREEN
+BUTTON3_TOGGLE * LOOP
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98
new file mode 100644
index 0000000..2885372
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98
@@ -0,0 +1,37 @@
+#
+# lircmd config file
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+# ACTIVATE * MENUE
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+
+# These are lircmd-0.5.5 extensions
+MOVE_IN * VOL_UP
+MOVE_OUT * VOL_DOWN
+
+BUTTON1_DOWN * 5
+BUTTON1_UP * 0
+
+BUTTON1_DOWN * TV/FM
+BUTTON2_DOWN * CD
+BUTTON3_DOWN * TELETEXT
+BUTTON1_CLICK * DISPLAY
+BUTTON3_CLICK * LOOP
+
+BUTTON1_TOGGLE * VIDEO
+BUTTON2_TOGGLE * AUDIO
+BUTTON3_TOGGLE * FULLSCREEN
diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy
new file mode 100644
index 0000000..1fd689f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy
@@ -0,0 +1,63 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001
+#
+# contributed by Miguel Angel Alvarez <maacruz@navegalia.com>
+#
+# brand: BESTBUY
+# model: Easy TV (BT848)
+# supported devices:
+#
+
+begin remote
+
+ name BESTBUY
+ bits 5
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 3
+ pre_data 0x0
+# gap 149990
+ gap 199989
+ toggle_bit 2
+
+
+ begin codes
+ 0 0x0000000000000000
+ 1 0x0000000000000001
+ 2 0x0000000000000002
+ 3 0x0000000000000003
+ 4 0x0000000000000004
+ 5 0x0000000000000005
+ 6 0x0000000000000006
+ 7 0x0000000000000007
+ 8 0x0000000000000008
+ 9 0x0000000000000009
+ TV 0x000000000000001C
+ POWER 0x0000000000000012
+ VIDEO 0x0000000000000011
+ PREVIEW 0x000000000000000F
+ MUTE 0x0000000000000013
+ SCAN 0x0000000000000010
+ CHANNEL_UP 0x000000000000001A
+ CHANNEL_DOWN 0x000000000000001E
+ VOL_UP 0x000000000000001B
+ VOL_DOWN 0x000000000000001F
+ LOOP 0x000000000000000A
+ 100 0x0000000000000017
+ ZOOM 0x000000000000000D
+ RECORD 0x000000000000000E
+ STOP 0x000000000000001D
+ PLAY 0x0000000000000019
+ FREEZE 0x0000000000000016
+ COLOR 0x0000000000000014
+ LEFT 0x0000000000000018
+ RIGHT 0x000000000000000C
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2
new file mode 100644
index 0000000..77e87e3
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2
@@ -0,0 +1,59 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001
+#
+# contributed by Miguel Angel Alvarez <maacruz@navegalia.com>
+#
+# brand: BESTBUY
+# model: EASY TV (BT878)
+# supported devices:
+#
+
+begin remote
+
+ name BESTBUY
+ bits 7
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 1
+ pre_data 0x0
+ gap 199981
+ toggle_bit 0
+
+
+ begin codes
+ TV/FM 0x0000000000000043
+ SCAN 0x0000000000000047
+ ZOOM 0x000000000000005C
+ POWER 0x000000000000005E
+ 1 0x0000000000000041
+ 2 0x000000000000004B
+ 3 0x000000000000005B
+ VOL+ 0x000000000000005F
+ 4 0x0000000000000045
+ 5 0x0000000000000049
+ 6 0x0000000000000055
+ VOL- 0x0000000000000057
+ 7 0x0000000000000046
+ 8 0x000000000000004A
+ 9 0x0000000000000052
+ CH+ 0x0000000000000056
+ 0 0x0000000000000042
+ LOOP 0x0000000000000053
+ +100 0x0000000000000050
+ CH- 0x0000000000000054
+ SOURCE 0x0000000000000040
+ MUTE 0x0000000000000058
+ - 0x0000000000000044
+ FUNCTION 0x000000000000004E
+ + 0x000000000000004C
+ RESET 0x000000000000004D
+ FREEZE 0x000000000000004F
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy
new file mode 100644
index 0000000..e57d11f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy
@@ -0,0 +1,33 @@
+#
+# lircmd config file
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * RESERVED
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_IN * CHANNEL_UP
+MOVE_OUT * CHANNEL_DOWN
+
+BUTTON1_TOGGLE * 5
+BUTTON1_TOGGLE * ZOOM
+BUTTON2_TOGGLE * RECORD
+BUTTON3_TOGGLE * STOP
+
+BUTTON1_CLICK * POWER
+BUTTON2_CLICK * TV
+BUTTON3_CLICK * SCAN
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2
new file mode 100644
index 0000000..c515058
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2
@@ -0,0 +1,34 @@
+#
+# lircmd config file
+#
+
+#PROTOCOL IntelliMouse
+PROTOCOL MouseSystems
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * PLAY
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_IN * CH+
+MOVE_OUT * CH-
+
+BUTTON1_TOGGLE * 5
+BUTTON1_TOGGLE * FUNCTION
+BUTTON2_TOGGLE * -
+BUTTON3_TOGGLE * +
+
+BUTTON1_CLICK * TV/FM
+BUTTON2_CLICK * SCAN
+BUTTON3_CLICK * ZOOM
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca
new file mode 100644
index 0000000..c1a0fa1
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca
@@ -0,0 +1,46 @@
+#
+#
+# contributed by Konrad Riedel <k.riedel@gmx.de>
+#
+# brand: CARACA
+# model: RC5 Remote Control
+#
+# supported devices:
+# CARACA nodes - see http://caraca.sourceforge.net
+# first byte: node address
+# 2nd byte: ir code
+#
+
+begin remote
+
+ name Caraca
+ bits 16
+
+ begin codes
+ POWER 0x3ff3
+ 1 0x3ffe
+ 2 0x3ffd
+ 3 0x3ffc
+ 4 0x3ffb
+ 5 0x3ffa
+ 6 0x3ff9
+ 7 0x3ff8
+ 8 0x3ff7
+ 9 0x3ff6
+ 0 0x3ff5
+ PAUSE 0x3fcf
+ EJECT 0x3fe2
+ SEEK- 0x3fcd
+ PLAY 0x3fca
+ SEEK+ 0x3fcb
+ RECORD 0x3fd2
+ STOP 0x3fc9
+ CH- 0x3fde
+ CH+ 0x3fdf
+ VOL- 0x3fee
+ VOL+ 0x3fef
+ MUTE 0x3ff2
+ TV/FM 0x3fe3
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca
new file mode 100644
index 0000000..6baf5e4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca
@@ -0,0 +1,134 @@
+#
+# This is an example of ~/.lircrc file
+# It is a copy of actual setup from my home machine.
+# Contributed by Konrad Riedel <k.riedel@gmx.de>
+#
+begin
+ prog = irexec
+ button = tv/fm
+ config = xawtv -geometry +64+64 &
+ mode = tv
+ flags = once
+end
+
+begin tv
+ begin
+ prog = xawtv
+ button = power
+ config = quit
+ flags = mode
+ end
+ begin
+ prog = xawtv
+ button = source
+ repeat = 1
+ config = setinput next
+ end
+ begin
+ prog = xawtv
+ button = zoom
+ repeat = 1
+ config = fullscreen
+ end
+ begin
+ prog = xawtv
+ button = ch-
+ repeat = 1
+ config = setstation prev
+ end
+ begin
+ prog = xawtv
+ button = ch+
+ repeat = 1
+ config = setstation next
+ end
+ begin
+ prog = xawtv
+ button = record
+ repeat = 1
+ #config = snap jpeg
+ config = quit
+ end
+ begin
+ prog = xawtv
+ button = scan
+ repeat = 1
+ config = Key ctrl-z xawtv
+ end
+ begin
+ prog = xawtv
+ button = MUTE
+ config = volume mute
+ end
+end tv
+begin
+ prog = irexec
+ button = power
+ config = xmms&
+ mode = xmms
+ flags = once
+end
+
+begin xmms
+ begin
+ prog = xmms
+ button = play
+ config = PLAY
+ end
+ begin
+ prog = xmms
+ button = pause
+ config = PAUSE
+ end
+ begin
+ prog = xmms
+ button = stop
+ config = STOP
+ end
+ begin
+ prog = xmms
+ button = vol-
+ repeat = 1
+ config = VOL_DOWN
+ end
+ begin
+ prog = xmms
+ button = vol+
+ repeat = 1
+ config = VOL_UP
+ end
+
+ begin
+ prog = xmms
+ button = power
+ config = QUIT
+ flags = mode
+ end
+ begin
+ prog = xmms
+ button = mute
+ config = MUTE
+ end
+ begin
+ prog = xmms
+ button = seek+
+ repeat = 1
+ config = FWD
+ end
+ begin
+ prog = xmms
+ button = seek-
+ repeat = 1
+ config = BWD
+ end
+ begin
+ prog = xmms
+ button = ch+
+ config = NEXT
+ end
+ begin
+ prog = xmms
+ button = ch-
+ config = PREV
+ end
+end xmms
diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos
new file mode 100644
index 0000000..764506c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos
@@ -0,0 +1,56 @@
+
+#
+# This config file is for remote that comes with cheap TV Card made by
+# Chronos.
+#
+# contributed by T�nu Raitviir <jussuf@bumpclub.ee>
+#
+# brand: Chronos Video Shuttle II
+# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23)
+#
+
+begin remote
+
+ name Chronos
+ bits 5
+ eps 30
+ aeps 100
+
+ gap 199766
+ toggle_bit 0
+
+ begin codes
+ POWER 0x0000000000000000
+ MOUSE_MODE 0x0000000000000010
+ FULL_SCREEN 0x0000000000000008
+ CH+ 0x0000000000000009
+ CH- 0x0000000000000019
+ 1 0x0000000000000018
+ 2 0x0000000000000004
+ 3 0x0000000000000014
+ 4 0x000000000000001C
+ 5 0x0000000000000002
+ 6 0x0000000000000012
+ 7 0x000000000000001A
+ 8 0x0000000000000006
+ 9 0x0000000000000016
+ 0 0x000000000000001E
+ VOL+ 0x0000000000000005
+ VOL- 0x000000000000001D
+ SOURCE 0x0000000000000003
+ MUTE 0x000000000000001B
+ AUDIO 0x0000000000000015
+ VIDEO 0x0000000000000011
+ CANCEL 0x000000000000001F
+ ENTER 0x0000000000000001
+ ESC 0x000000000000000B
+ RECALL 0x000000000000000C
+ AIR_CATV 0x000000000000000E
+ INC 0x000000000000000A
+ DEC 0x000000000000000D
+ BOX 0x0000000000000017
+ DOWN_ARROW 0x0000000000000013
+ LEFT_ARROW_TERM 0x000000000000000F
+ RIGHT_ARROW_TERM 0x0000000000000007
+ end codes
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x
new file mode 100644
index 0000000..62f711e
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x
@@ -0,0 +1,72 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000
+#
+# contributed by Claas Langbehn <claas@bigfoot.com>
+# Please read the documentation, faq etc.
+# before sending me mails.
+#
+# brand: ASKEY
+# model: AS-218 / AS-220
+# supported devices: ASKEY MagicTV
+#
+# comment: repeated keys are recognized, now.
+#
+
+begin remote
+
+ name AS-218
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9087 4424
+ one 629 1617
+ zero 629 495
+ ptrail 632
+ repeat 9088 2182
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 107905
+ repeat_bit 0
+
+ begin codes
+ 0 0x00000000000000FF
+ 1 0x000000000000807F
+ 2 0x00000000000040BF
+ 3 0x000000000000C03F
+ 4 0x00000000000020DF
+ 5 0x000000000000A05F
+ 6 0x000000000000609F
+ 7 0x000000000000E01F
+ 8 0x00000000000010EF
+ 9 0x000000000000906F
+ LOOP 0x00000000000050AF
+# unused
+ FINE_UP(PLUS) 0x00000000000030CF
+ ZOOM 0x000000000000B04F
+ RECORD 0x000000000000708F
+ PREVIEW 0x000000000000F00F
+
+ SCAN 0x00000000000008F7
+ VIDEO 0x0000000000008877
+ POWER 0x00000000000048B7
+ MUTE 0x000000000000C837
+ COLOR 0x00000000000028D7
+#unused
+ FREEZE 0x0000000000006897
+ 100 0x000000000000E817
+ FINE_DOWN(MINUS) 0x00000000000018E7
+ PLAY 0x0000000000009867
+ CH_UP 0x00000000000058A7
+ VOL_UP 0x000000000000D827
+ TV 0x00000000000038C7
+ STOP 0x000000000000B847
+ CH_DOWN 0x0000000000007887
+ VOL_DOWN 0x000000000000F807
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb
new file mode 100644
index 0000000..e84a68b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb
@@ -0,0 +1,56 @@
+#
+# contributed by Clemens Ladisch <clemens|ladisch.de>
+#
+# brand: Creative
+# model: RM-1500
+# supported devices: Sound Blaster Extigy, SB Audigy 2 NX
+#
+# This is for the integrated IR receiver in Creative USB audio devices
+# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio
+# driver from ALSA 1.0.9 or later).
+#
+# This file should work with the exaudio driver, too.
+#
+
+begin remote
+
+ name RM-1500
+ bits 8
+
+ begin codes
+ power 0x01
+ 1 0x02
+ 2 0x03
+ 3 0x04
+ 4 0x05
+ 5 0x06
+ 6 0x07
+ 7 0x08
+ 8 0x09
+ 9 0x0a
+ 0 0x0b
+ cmss 0x0c
+ mute 0x0d
+ rec 0x0e
+ vol- 0x0f
+ vol+ 0x10
+ stop-eject 0x11
+ play-pause 0x12
+ slow 0x13
+ prev 0x14
+ next 0x15
+ step 0x16
+ eax 0x17
+ options 0x18
+ display 0x19
+ return 0x1a
+ start 0x1b
+ cancel 0x1c
+ up 0x1d
+ left 0x1e
+ ok 0x1f
+ right 0x20
+ down 0x21
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox
new file mode 100644
index 0000000..c5d2d9c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox
@@ -0,0 +1,55 @@
+#
+# contributed by Juergen Jaeschke <jaeschke.privat@gmx.de>
+#
+# brand: Creative
+# model: Creative BreakOut-Box Remote Control
+#
+
+begin remote
+
+ name Creative BreakOut-Box IR
+ bits 8
+ eps 30
+ aeps 100
+ one 0 0
+ zero 0 0
+ gap 199984
+ toggle_bit 0
+
+ begin codes
+ DVD/CD 0x0000000000000001
+ DVR/TV 0x0000000000000000
+ MENU 0x0000000000000003
+ LANG 0x0000000000000005
+ PLAYLIST 0x0000000000000011
+ BACKWARD 0x000000000000000A
+ PLAY 0x0000000000000008
+ FORWARD 0x000000000000000F
+ LAST 0x0000000000000002
+ STOP 0x0000000000000007
+ NEXT 0x0000000000000006
+ MUTE 0x0000000000000014
+ STEP 0x0000000000000009
+ UP 0x000000000000000C
+ LEFT 0x000000000000000B
+ RIGHT 0x000000000000000D
+ DOWN 0x000000000000000E
+ VOL+ 0x0000000000000012
+ VOL- 0x0000000000000015
+ OK 0x0000000000000011
+ ANGLE+ 0x0000000000000010
+ ANGLE- 0x0000000000000013
+ REC 0x0000000000000004
+ 1 0x0000000000000016
+ 2 0x0000000000000017
+ 3 0x0000000000000018
+ 4 0x0000000000000019
+ 5 0x000000000000001A
+ 6 0x000000000000001B
+ 7 0x000000000000001C
+ 8 0x000000000000001D
+ 9 0x000000000000001E
+ 0 0x000000000000001F
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative
new file mode 100644
index 0000000..69f3d27
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative
@@ -0,0 +1,59 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001
+#
+# contributed by Stephen White <stephen@earth.li>
+#
+# brand: Creative
+# model: PC-DVD Remote
+# supported devices: Creative-Infra-Receiver
+#
+
+begin remote
+
+ name CREATIVE_INFRA_DVD
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9293 4302
+ one 771 1494
+ zero 771 358
+ ptrail 756
+ pre_data_bits 16
+ pre_data 0x8435
+ gap 108646
+ toggle_bit 0
+
+ begin codes
+ play 0x00000000000005FA
+ stop 0x00000000000016E9
+ pause 0x00000000000000FF
+ eject 0x00000000000002FD
+ last 0x00000000000017E8
+ rrev 0x00000000000004FB
+ ffwd 0x00000000000006F9
+ next 0x00000000000001FE
+ 1 0x00000000000008F7
+ 2 0x00000000000009F6
+ 3 0x0000000000000AF5
+ shift 0x00000000000014EB
+ 4 0x0000000000000CF3
+ 5 0x0000000000000DF2
+ 6 0x0000000000000EF1
+ mouse 0x00000000000007F8
+ 7 0x00000000000010EF
+ 8 0x00000000000011EE
+ 9 0x00000000000012ED
+ vol+ 0x0000000000000FF0
+ start 0x00000000000003FC
+ 0 0x00000000000015EA
+ mute 0x0000000000000BF4
+ vol- 0x00000000000013EC
+ end codes
+
+end remote
+
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd
new file mode 100644
index 0000000..cdaaad9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd
@@ -0,0 +1,61 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001
+#
+# contributed by
+#
+# brand: Creative
+# model: CD-Rom Creditcard-sized IR-Controller
+# supported devices: CD-Rom
+#
+
+begin remote
+
+ name CREATIVE_INFRA
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9051 4625
+ one 534 1707
+ zero 534 588
+ ptrail 490
+ repeat 9039 2363
+ pre_data_bits 16
+ pre_data 0x8435
+ gap 108434
+ min_repeat 1
+ toggle_bit 0
+
+
+ begin codes
+ PAUSE 0x00000000000001FE
+ PLAY 0x00000000000002FD
+ STOP 0x00000000000003FC
+ REW 0x00000000000005FA
+ PREV 0x00000000000006F9
+ FF 0x00000000000007F8
+ MENU 0x00000000000004FB
+ MOUSE 0x00000000000008F7
+ 1 0x00000000000009F6
+ 2 0x0000000000000AF5
+ 3 0x0000000000000BF4
+ 4 0x0000000000000DF2
+ 5 0x0000000000000EF1
+ 6 0x0000000000000FF0
+ 7 0x00000000000011EE
+ 8 0x00000000000012ED
+ 9 0x00000000000013EC
+ 0 0x00000000000016E9
+ MUTE 0x0000000000000CF3
+ VOL_UP 0x00000000000010EF
+ VOL_DOWN 0x00000000000014EB
+ SHIFT 0x00000000000015EA
+ ENTER 0x00000000000017E8
+ ZOOM 0x00000000000018E7
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive
new file mode 100644
index 0000000..b68e5c4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive
@@ -0,0 +1,115 @@
+#
+# contributed by Andrew de Quincey
+#
+# brand: rm1000w
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name rm1000w
+ flags SPACE_ENC|CONST_LENGTH
+ bits 16
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ pre_data_bits 16
+ pre_data 0x8322
+ gap 108000
+ toggle_bit 0
+
+ repeat 9000 2250
+
+ frequency 38000
+ duty_cycle 33
+
+
+ begin codes
+ 1 0x0000000000008B74
+ 2 0x0000000000008F70
+ 3 0x000000000000906F
+ 4 0x0000000000008A75
+ 5 0x000000000000847B
+ 6 0x0000000000007887
+ 7 0x0000000000008976
+ 8 0x000000000000837C
+ 9 0x0000000000007788
+ 0 0x000000000000807F
+ stop 0x000000000000857A
+ play 0x0000000000007986
+ pause 0x0000000000007986
+ slow 0x0000000000007D82
+ step 0x0000000000007E81
+ prev 0x0000000000007F80
+ next 0x0000000000007A85
+ mute 0x0000000000006E91
+ vol- 0x000000000000639C
+ vol+ 0x000000000000629D
+ eax 0x0000000000008C73
+ options 0x000000000000827D
+ display 0x0000000000007689
+ return 0x0000000000008E71
+ start 0x0000000000008877
+ close 0x0000000000007C83
+ up 0x0000000000007B84
+ down 0x0000000000008D72
+ left 0x0000000000008778
+ right 0x000000000000758A
+ ok 0x000000000000817E
+ power 0x000000000000619e
+ cmss 0x000000000000718e
+ record 0x000000000000738c
+
+ end codes
+
+end remote
+
+#
+# contributed by Stefan Br�ns
+#
+# brand: Creative Audigy 2 ZS Platinum LiveDrive
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+
+begin remote
+
+
+ name LiveDrive
+ flags SPACE_ENC|CONST_LENGTH
+ bits 16
+ eps 30
+ aeps 100
+
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ pre_data_bits 16
+ pre_data 0x8000
+ gap 108000
+ toggle_bit 0
+
+
+ repeat 9000 2250
+
+
+ frequency 38000
+ duty_cycle 33
+
+
+
+
+ begin codes
+ mute 0x0000000000000040
+ vol+ 0x0000000000008080
+ vol- 0x0000000000008082
+ cmss 0x0000000000000080
+ end codes
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV
new file mode 100644
index 0000000..fbc91a8
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV
@@ -0,0 +1,221 @@
+#
+# contributed by Chris Pascoe
+#
+# brand: DVICO
+# model no. of remote control: DVB-T
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name DVICO
+ bits 32
+ eps 0
+ aeps 0
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 32
+ pre_data 0x10046
+ gap 195755
+ post_data_bits 0
+ toggle_bit 0
+
+ begin codes
+ 1 0x00000000000011F9
+ 2 0x00000000000012F9
+ 3 0x00000000000013F9
+ 4 0x00000000000014F9
+ 5 0x00000000000015F9
+ 6 0x00000000000016F9
+ 7 0x00000000000017F9
+ 8 0x00000000000018F9
+ 9 0x00000000000019F9
+ 0 0x00000000000010F9
+ power 0x0000000000000AF9
+ pcoff 0x0000000000000CF9
+ camera 0x0000000000001AF9
+ record 0x0000000000001BF9
+ chup 0x00000000000000F9
+ chdown 0x00000000000001F9
+ volup 0x00000000000002F9
+ voldown 0x00000000000003F9
+ playpause 0x0000000000001FF9
+ rew 0x0000000000001CF9
+ stop 0x0000000000001EF9
+ ff 0x0000000000001DF9
+ folder 0x00000000000040F9
+ atvdtv 0x00000000000006F9
+ dvhs 0x00000000000041F9
+ menu 0x00000000000008F9
+ aspect 0x00000000000007F9
+ zoom 0x00000000000004F9
+ epg 0x0000000000000BF9
+ mute 0x0000000000000DF9
+ back 0x0000000000000EF9
+ hd 0x0000000000000FF9
+ red 0x00000000000005F9
+ green 0x00000000000009F9
+ yellow 0x00000000000042F9
+ blue 0x00000000000043F9
+ end codes
+
+end remote
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005
+#
+# contributed by anonymous
+#
+# brand: DVICO
+# model no. of remote control: MCE Remote
+#
+
+begin remote
+
+ name DVICO_MCE
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x0
+ post_data_bits 8
+ post_data 0x0
+ gap 195956
+ toggle_bit 0
+
+
+ begin codes
+ ok 0x0000000000FE5E00
+ dtv 0x0000000000FE0200
+ mp3 0x0000000000FE0E00
+ dvd 0x0000000000FE1A00
+ cpf 0x0000000000FE1E00
+ setup 0x0000000000FE1600
+ tv_onoff 0x0000000000FE4600
+ guide 0x0000000000FE0A00
+ back 0x0000000000FE4900
+ more 0x0000000000FE5900
+ dvd_menu 0x0000000000FE4D00
+ alt_tab 0x0000000000FE5500
+ replay 0x0000000000FE0F00
+ skip 0x0000000000FE1200
+ up 0x0000000000FE5100
+ down 0x0000000000FE5300
+ left 0x0000000000FE5B00
+ right 0x0000000000FE5F00
+ start 0x0000000000FE4200
+ vol_up 0x0000000000FE1500
+ vol_down 0x0000000000FE0500
+ ch_up 0x0000000000FE1100
+ ch_down 0x0000000000FE0900
+ snapshot 0x0000000000FE5200
+ live 0x0000000000FE5A00
+ folder_open 0x0000000000FE1900
+ 1 0x0000000000FE0B00
+ 2 0x0000000000FE1700
+ 3 0x0000000000FE1B00
+ 4 0x0000000000FE0700
+ 5 0x0000000000FE5000
+ 6 0x0000000000FE5400
+ 7 0x0000000000FE4800
+ 8 0x0000000000FE4C00
+ 9 0x0000000000FE5800
+ 0 0x0000000000FE0300
+ aspect 0x0000000000FE1300
+ fullscreen 0x0000000000FE1F00
+ rewind 0x0000000000FE4300
+ playpause 0x0000000000FE4700
+ fastforward 0x0000000000FE4F00
+ stop 0x0000000000FE0D00
+ mute 0x0000000000FE5700
+ record 0x0000000000FE0100
+ white_onoff 0x0000000000FE4E00
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005
+#
+# contributed by: David Bussenschutt <buzz|oska.com>
+#
+# brand: "DViCO"
+# model no. of remote control: "Fusion Remote MCE"
+# devices being controlled by this remote: My MythTV install
+#
+
+begin remote
+
+ name DVICO_MCE
+ bits 8
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 48
+ pre_data 0x100460000
+ post_data_bits 8
+ post_data 0xFE
+ gap 195843
+ toggle_bit 0
+
+
+ begin codes
+ ok 0x5e
+ up 0x51
+ down 0x53
+ left 0x5B
+ right 0x5F
+ setup 0x16
+ tv_onoff 0x46
+ guide 0x0A
+ dtv 0x02
+ mp3 0x0E
+ dvd 0x1A
+ cpf 0x1E
+ back 0x49
+ more 0x59
+ dvd_menu 0x4D
+ alt_tab 0x55
+ replay 0x0F
+ skip 0x12
+ start 0x42
+ vol_up 0x15
+ vol_down 0x05
+ ch_up 0x11
+ ch_down 0x09
+ photo 0x52
+ live 0x5A
+ folder 0x19
+ 1 0x0B
+ 2 0x17
+ 3 0x1B
+ 4 0x07
+ 5 0x50
+ 6 0x54
+ 7 0x48
+ 8 0x4C
+ 9 0x58
+ 0 0x03
+ ratio 0x13
+ zoom 0x1F
+ rew 0x43
+ playpause 0x47
+ ff 0x4F
+ mute 0x57
+ stop 0x0D
+ rec 0x01
+ power_onoff 0x4e
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65
new file mode 100644
index 0000000..a10181d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65
@@ -0,0 +1,73 @@
+#
+# Config file for AOpen XC Cube EA65, EA65-II
+# Max Krasnyanskiy <maxk@qualcomm.com>
+#
+
+begin remote
+ name EA65
+ bits 24
+ eps 10
+ aeps 100
+
+ gap 960000
+ toggle_bit 0
+
+ begin codes
+ tv/pvr 0x0014814c
+ photo 0x0017810e
+ htpc 0x0011811b
+ dvd/vcd 0x00128100
+ cd/mp3 0x00138152
+ fm 0x00158111
+ video 0x0016810f
+
+ 1 0x0041810b
+ 2 0x00428115
+ 3 0x00438112
+ 4 0x00448141
+ 5 0x00458119
+ 6 0x00468116
+ 7 0x00478150
+ 8 0x0048811a
+ 9 0x00498155
+ * 0x00328156
+ 0 0x00408158
+ # 0x0030814d
+
+ menu 0x00188104
+ exit 0x001d8154
+ enter 0x001e8101
+ up 0x00198159
+ down 0x001a811c
+ left 0x001c8102
+ right 0x001b815d
+
+ vol+ 0x00298103
+ vol- 0x002a814e
+ ch+ 0x002c8113
+ ch- 0x002d8117
+ mute 0x00288105
+ tune+ 0x002e8144
+ tune- 0x002f8148
+ mem 0x00318145
+ scan 0x00278151
+
+ display 0x0034811f
+ eject 0x0035815c
+ rwnd 0x00228118
+ ffwd 0x00218110
+ rec 0x002b810a
+ repeate 0x0038815a
+ prev 0x00238107
+ next 0x00248114
+ time/shift 0x00338108
+ stop 0x0020811d
+ play/pause 0x001f8109
+
+ play-pause 0x0080811d
+ stop-eject 0x00238107
+ mode- 0x00ff1080
+ mode+ 0x00ff1180
+ end codes
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65
new file mode 100644
index 0000000..fd96d42
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65
@@ -0,0 +1,381 @@
+#
+# Max Krasnyanskiy <maxk@qualcomm.com>
+#
+
+#
+# Xine key bindings.
+#
+
+# start playback
+begin
+ button = dvd/vcd
+ prog = xine
+ repeat = 1
+ config = Play
+end
+
+# playback pause toggle
+begin
+ button = play/pause
+ prog = xine
+ repeat = 1
+ config = Pause
+end
+
+# stop playback
+begin
+ button = stop
+ prog = xine
+ repeat = 1
+ config = Stop
+end
+
+# eject the current medium
+begin
+ button = eject
+ prog = xine
+ repeat = 1
+ config = Eject
+end
+
+# scan playlist to grab stream infos
+begin
+ button = mem
+ prog = xine
+ repeat = 1
+ config = ScanPlaylistInfo
+end
+
+# set position to -60 seconds in current stream
+begin
+ button = rwnd
+ prog = xine
+ repeat = 1
+ config = SeekRelative-60
+end
+
+# set position to +60 seconds in current stream
+begin
+ button = ffwd
+ prog = xine
+ repeat = 1
+ config = SeekRelative+60
+end
+
+# increment playback speed
+begin
+ button = tune+
+ prog = xine
+ repeat = 1
+ config = SpeedFaster
+end
+
+# decrement playback speed
+begin
+ button = tune-
+ prog = xine
+ repeat = 1
+ config = SpeedSlower
+end
+
+# increment audio volume
+begin
+ button = vol+
+ prog = xine
+ repeat = 1
+ config = Volume+
+end
+
+# decrement audio volume
+begin
+ button = vol-
+ prog = xine
+ repeat = 1
+ config = Volume-
+end
+
+# audio muting toggle
+begin
+ button = mute
+ prog = xine
+ repeat = 1
+ config = Mute
+end
+
+# select next audio channel
+begin
+ button = ch+
+ prog = xine
+ repeat = 1
+ config = AudioChannelNext
+end
+
+# select previous audio channel
+begin
+ button = ch-
+ prog = xine
+ repeat = 1
+ config = AudioChannelPrior
+end
+
+# interlaced mode toggle
+begin
+ button = scan
+ prog = xine
+ repeat = 1
+ config = ToggleInterleave
+end
+
+# cycle aspect ratio values
+begin
+ button = display
+ prog = xine
+ repeat = 1
+ config = ToggleAspectRatio
+end
+
+# jump to Title Menu
+begin
+ button = menu
+ prog = xine
+ repeat = 1
+ config = TitleMenu
+end
+
+# menu navigate up
+begin
+ button = up
+ prog = xine
+ repeat = 1
+ config = EventUp
+end
+
+# menu navigate down
+begin
+ button = down
+ prog = xine
+ repeat = 1
+ config = EventDown
+end
+
+# menu navigate left
+begin
+ button = left
+ prog = xine
+ repeat = 1
+ config = EventLeft
+end
+
+# menu navigate right
+begin
+ button = right
+ prog = xine
+ repeat = 1
+ config = EventRight
+end
+
+# menu select
+begin
+ button = enter
+ prog = xine
+ repeat = 1
+ config = EventSelect
+end
+
+# jump to next chapter
+begin
+ button = next
+ prog = xine
+ repeat = 1
+ config = EventNext
+end
+
+# jump to previous chapter
+begin
+ button = prev
+ prog = xine
+ repeat = 1
+ config = EventPrior
+end
+
+# select a subtitle file
+begin
+ button = repeat
+ prog = xine
+ repeat = 1
+ config = SubSelector
+end
+
+# enter the number 0
+begin
+ button = 0
+ prog = xine
+ repeat = 1
+ config = Number0
+end
+
+# enter the number 1
+begin
+ button = 1
+ prog = xine
+ repeat = 1
+ config = Number1
+end
+
+# enter the number 2
+begin
+ button = 2
+ prog = xine
+ repeat = 1
+ config = Number2
+end
+
+# enter the number 3
+begin
+ button = 3
+ prog = xine
+ repeat = 1
+ config = Number3
+end
+
+# enter the number 4
+begin
+ button = 4
+ prog = xine
+ repeat = 1
+ config = Number4
+end
+
+# enter the number 5
+begin
+ button = 5
+ prog = xine
+ repeat = 1
+ config = Number5
+end
+
+# enter the number 6
+begin
+ button = 6
+ prog = xine
+ repeat = 1
+ config = Number6
+end
+
+# enter the number 7
+begin
+ button = 7
+ prog = xine
+ repeat = 1
+ config = Number7
+end
+
+# enter the number 8
+begin
+ button = 8
+ prog = xine
+ repeat = 1
+ config = Number8
+end
+
+# enter the number 9
+begin
+ button = 9
+ prog = xine
+ repeat = 1
+ config = Number9
+end
+
+# quit the program
+begin
+ button = exit
+ prog = xine
+ repeat = 1
+ config = Quit
+end
+
+##
+# End of xine key bindings.
+##
+
+## MPlayer lirc setup
+
+# Show OSD
+begin
+ prog = mplayer
+ button = menu
+ repeat = 1
+ config = osd
+end
+
+# Pause playback
+begin
+ prog = mplayer
+ button = play/pause
+ repeat = 1
+ config = pause
+end
+
+# Stop playback and exit
+begin
+ prog = mplayer
+ button = stop
+ repeat = 1
+ config = stop #quit
+end
+
+# Mute
+begin
+ prog = mplayer
+ button = mute
+ repeat = 1
+ config = mute
+end
+
+# Seek back 10 seconds
+begin
+ prog = mplayer
+ button = rwnd
+ repeat = 1
+ config = seek -10
+end
+
+# Seek forward 30 seconds
+begin
+ prog = mplayer
+ button = ffwd
+ repeat = 1
+ config = seek +10
+end
+
+# Quit
+begin
+ prog = mplayer
+ button = exit
+ repeat = 1
+ config = quit
+end
+
+# Seek forward 10 minutes
+begin
+ prog = mplayer
+ button = next
+ repeat = 1
+ config = seek +600
+end
+
+# Seek backward 10 minutes
+begin
+ prog = mplayer
+ button = prev
+ repeat = 1
+ config = seek -600
+end
+
+# Toggle full-screen
+begin
+ prog = mplayer
+ button = display
+ repeat = 1
+ config = vo_fullscreen
+end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte
new file mode 100644
index 0000000..d2330a3
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte
@@ -0,0 +1,53 @@
+#
+#
+# contributed by Vadim Shliakhov <svadim@nm.ru>
+#
+# brand: Ericsson
+# model: Mobile Phone over Bluetooth (BTE)
+#
+# supported devices:
+# Ericsson t520m, t630
+#
+
+begin remote
+
+ name bte
+ bits 16
+
+ begin codes
+ 0 0x0030
+ 1 0x0031
+ 2 0x0032
+ 3 0x0033
+ 4 0x0034
+ 5 0x0035
+ 6 0x0036
+ 7 0x0037
+ 8 0x0038
+ 9 0x0039
+ STAR 0x002a # '*'
+ HASH 0x0023 # '#'
+ UP 0x005e # '^'
+ DOWN 0x0076 # 'v'
+ LEFT 0x003c # '<'
+ RIGHT 0x003e # '>'
+ CANCEL 0x0063 # 'c'
+ VOL_UP 0x0075 # 'u'
+ VOL_DOWN 0x0064 # 'd'
+
+# t520m
+ NO 0x0065 # 'e'
+ YES 0x0073 # 's'
+ OPTION 0x004c # 'L'
+ MEMO 0x0047 # 'G' - hides dialog widget!
+
+# t630
+ F_LEFT 0x005b # '['
+ F_RIGHT 0x005d # ']' - triggers 'e'
+ J_CLICK 0x3a4a # ':J' - triggers 'e'
+ RETURN 0x3a52 # ':R' - triggers 'e'
+ CAMERA 0x3a43 # ':C'
+ WAP 0x3a4f # ':O'
+
+ end codes
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf
new file mode 100644
index 0000000..e645cba
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf
@@ -0,0 +1,31 @@
+#
+# generic Denon config file
+#
+# source: various
+#
+# used by: Denon, Sharp
+
+begin remote
+
+ name DENON
+ bits 15
+ flags SPACE_ENC
+ eps 30
+ aeps 100
+
+ one 275 1900
+ zero 275 775
+ ptrail 275
+ gap 43000
+ repeat_bit 0
+
+# frequency 32000
+# frequency is 455/12 according to stewart@neuron.com
+# remote is based on Sharp lc3715 IC
+ frequency 38000
+# duty_cycle unknown
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf
new file mode 100644
index 0000000..e786f2b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf
@@ -0,0 +1,53 @@
+#
+# generic Motorola config file
+#
+# source: Motorola Application Note AN463
+# ICs 68HC05K0/MC144105/MC144107
+#
+# used by Grundig
+#
+# currently you have to create config files for such remotes manually
+# as irrecord always will record the start code
+
+begin remote
+
+ name MOTOROLA_START/STOP
+ flags SHIFT_ENC|CONST_LENGTH
+ bits 10
+ eps 10
+ aeps 250
+
+ header 512 2560
+ one 512 512
+ zero 512 512
+ gap 32800
+ repeat_bit 0
+ frequency 32000
+ duty_cycle 25
+
+ begin codes
+ START/STOP 0x0000000000000000
+ end codes
+
+end remote
+
+begin remote
+
+ name MOTOROLA
+ flags SHIFT_ENC|CONST_LENGTH
+ bits 10
+ eps 10
+ aeps 250
+
+ header 512 2560
+ one 512 512
+ zero 512 512
+ gap 131000
+ repeat_bit 0
+ frequency 32000
+ duty_cycle 25
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf
new file mode 100644
index 0000000..51c31d9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf
@@ -0,0 +1,32 @@
+#
+# generic NEC config file
+#
+# source: CIrCC datasheet, exiting config files
+#
+# used by: Toshiba
+
+begin remote
+
+ name NEC
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ pre_data_bits 16
+# just a guess
+ gap 108000
+
+ repeat 9000 4500
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf
new file mode 100644
index 0000000..068c253
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf
@@ -0,0 +1,34 @@
+#
+# generic NEC config file
+#
+# source: CIrCC datasheet, exiting config files
+#
+# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo,
+# Sanyo, Schneider, SEG, Yamaha
+
+
+begin remote
+
+ name NEC
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ pre_data_bits 16
+# just a guess
+ gap 108000
+
+ repeat 9000 2250
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf
new file mode 100644
index 0000000..18ee327
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf
@@ -0,0 +1,30 @@
+#
+# generic NEC config file
+#
+# source: CIrCC datasheet, exiting config files
+#
+# used by: Canon, Creative, Domland, Orion
+
+begin remote
+
+ name NEC
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ pre_data_bits 16
+# just a guess
+ gap 108000
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf
new file mode 100644
index 0000000..f62e3f9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf
@@ -0,0 +1,30 @@
+#
+# generic RC-5 config file
+#
+# source: SAA3010 datasheet
+#
+# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider
+
+begin remote
+
+ name RC-5
+ bits 6
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 889 889
+ zero 889 889
+ plead 889
+ pre_data_bits 7
+ gap 113792
+ toggle_bit 2
+
+# frequency 35750
+ frequency 36000
+ duty_cycle 50
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf
new file mode 100644
index 0000000..9565707
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf
@@ -0,0 +1,28 @@
+#
+# generic RC-6 config file
+#
+# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
+# http://home.hccnet.nl/m.majoor/pronto.pdf
+#
+# used by: Philips
+
+begin remote
+
+ name RC-6
+ bits 8
+ flags RC6|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 2667 889
+ one 444 444
+ zero 444 444
+ pre_data_bits 13
+ pre_data 0xEFB
+ gap 108000
+ toggle_bit 5
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf
new file mode 100644
index 0000000..89f847a
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf
@@ -0,0 +1,23 @@
+begin remote
+
+ name RCMM-32
+ bits 32
+ flags RCMM|CONST_LENGTH
+ eps 2
+ aeps 100
+
+ header 417 278
+ three 167 778
+ two 167 611
+ one 167 444
+ zero 167 278
+ ptrail 167
+ pre_data_bits 0
+ gap 99817
+ repeat_bit 0
+
+ begin codes
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf
new file mode 100644
index 0000000..b9702ea
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf
@@ -0,0 +1,31 @@
+#
+# generic RECS 80 config file
+#
+# source: SAA3008 datasheet
+#
+# used by: Saba, Technisat
+
+begin remote
+
+ name RECS80
+ bits 5
+ flags SPACE_ENC|CONST_LENGTH
+ eps 20
+ aeps 150
+
+ one 141 7590
+ zero 141 5090
+ ptrail 141
+ pre_data_bits 6
+ pre_data 0x22
+ gap 121440
+ toggle_bit 2
+
+# frequency 37916
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf
new file mode 100644
index 0000000..fbcf8dc
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf
@@ -0,0 +1,34 @@
+#
+# generic Sanyo config file
+#
+# source: CIrCC datasheet, exiting config files
+# Sanyo LC7461M datasheet
+#
+# used by: Aiwa, Chinon, Sanyo
+
+begin remote
+
+ name Sanyo
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ pre_data_bits 26
+# just a guess
+ gap 108000
+
+ repeat 9000 4500
+
+# 455kHz/12
+ frequency 37916
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf
new file mode 100644
index 0000000..d62d12c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf
@@ -0,0 +1,28 @@
+#
+# generic Sony 12-bit config file
+#
+# source: various
+#
+
+begin remote
+
+ name SONY
+ bits 7
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 2400 600
+ one 1200 600
+ zero 600 600
+ post_data_bits 5
+ gap 45000
+ min_repeat 2
+
+ frequency 40000
+ duty_cycle 33
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf
new file mode 100644
index 0000000..4a64ca7
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf
@@ -0,0 +1,29 @@
+#
+# generic Sony 20-bit config file
+#
+# source: various
+#
+
+begin remote
+
+ name SONY
+ bits 7
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 2400 600
+ one 1200 600
+ zero 600 600
+ post_data_bits 13
+# gap is just a guess
+ gap 45000
+ min_repeat 2
+
+ frequency 40000
+# duty_cycle unknown
+
+ begin codes
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap
new file mode 100644
index 0000000..8e453b9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap
@@ -0,0 +1,69 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand: Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+ name Streamzap_PC_Remote
+ bits 6
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 889 889
+ zero 889 889
+ plead 889
+ pre_data_bits 8
+ pre_data 0xA3
+ gap 108344
+ toggle_bit 2
+
+
+ begin codes
+ 0 0x00
+ 1 0x01
+ 2 0x02
+ 3 0x03
+ 4 0x04
+ 5 0x05
+ 6 0x06
+ 7 0x07
+ 8 0x08
+ 9 0x09
+ POWER 0x0A
+ MUTE 0x0B
+ CH_UP 0x0C
+ VOL_UP 0x0D
+ CH_DOWN 0x0E
+ VOL_DOWN 0x0F
+ UP 0x10
+ LEFT 0x11
+ OK 0x12
+ RIGHT 0x13
+ DOWN 0x14
+ MENU 0x15
+ EXIT 0x16
+ PLAY 0x17
+ PAUSE 0x18
+ STOP 0x19
+ |<< 0x1A
+ >>| 0x1B
+ RECORD 0x1C
+ << 0x1D
+ >> 0x1E
+ RED 0x20
+ GREEN 0x21
+ YELLOW 0x22
+ BLUE 0x23
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc
new file mode 100644
index 0000000..6f86bfe
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc
@@ -0,0 +1,472 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'
+begin
+ prog = mythtv
+ button = 0
+ config = 0
+end
+
+begin
+ prog = mythtv
+ button = 1
+ config = 1
+end
+
+begin
+ prog = mythtv
+ button = 2
+ config = 2
+end
+
+begin
+ prog = mythtv
+ button = 3
+ config = 3
+end
+
+begin
+ prog = mythtv
+ button = 4
+ config = 4
+end
+
+begin
+ prog = mythtv
+ button = 5
+ config = 5
+end
+
+begin
+ prog = mythtv
+ button = 6
+ config = 6
+end
+
+begin
+ prog = mythtv
+ button = 7
+ config = 7
+end
+
+begin
+ prog = mythtv
+ button = 8
+ config = 8
+end
+
+begin
+ prog = mythtv
+ button = 9
+ config = 9
+end
+
+begin
+ prog = mythtv
+ button = POWER
+ config = Esc
+end
+
+# ???
+begin
+ prog = mythtv
+ button = MUTE
+ config = F9
+end
+
+begin
+ prog = mythtv
+ button = CH_UP
+ repeat = 3
+ config = Up
+end
+
+begin
+ prog = mythtv
+ button = VOL_UP
+ repeat = 3
+ config = ]
+end
+
+begin
+ prog = mythtv
+ button = CH_DOWN
+ repeat = 3
+ config = Down
+end
+
+begin
+ prog = mythtv
+ button = VOL_DOWN
+ repeat = 3
+ config = [
+end
+
+begin
+ prog = mythtv
+ button = UP
+ repeat = 3
+ config = Up
+end
+
+begin
+ prog = mythtv
+ button = LEFT
+# navigates, or skips back during playback or live tv.
+ config = Left
+end
+
+begin
+ prog = mythtv
+ button = OK
+ config = Return
+end
+
+begin
+ prog = mythtv
+ button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+ config = Right
+end
+
+begin
+ prog = mythtv
+ button = DOWN
+ repeat = 3
+ config = Down
+end
+
+begin
+ prog = mythtv
+ button = MENU
+ config = m
+end
+
+begin
+ prog = mythtv
+ button = EXIT
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ button = PLAY
+ config = l
+end
+
+begin
+ prog = mythtv
+ button = PAUSE
+ config = p
+end
+
+begin
+ prog = mythtv
+ button = STOP
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ # skip backward
+ button = |<<
+ config = PgUp
+end
+
+begin
+ prog = mythtv
+ # skip forward
+ button = >>|
+ config = PgDown
+end
+
+begin
+ prog = mythtv
+ button = RECORD
+ config = r
+end
+
+begin
+ prog = mythtv
+ # rewind
+ button = <<
+ config = <
+end
+
+begin
+ prog = mythtv
+ # fast forward
+ button = >>
+ config = >
+end
+
+begin
+ prog = mythtv
+ button = RED
+ # Delete
+ config = z
+end
+
+begin
+ prog = mythtv
+ button = GREEN
+ # Info
+ config = i
+end
+
+begin
+ prog = mythtv
+ button = YELLOW
+ # change aspect ratio
+ config = w
+end
+
+begin
+ prog = mythtv
+ button = BLUE
+ config = Tab
+end
+
+# MPLAYER
+begin
+ prog = mplayer
+ button = POWER
+ config = quit
+end
+
+begin
+ prog = mplayer
+ button = MUTE
+ config = mute
+end
+
+begin
+ prog = mplayer
+ button = VOL_UP
+ repeat = 3
+ config = volume +1
+end
+
+begin
+ prog = mplayer
+ button = VOL_DOWN
+ repeat = 3
+ config = volume -1
+end
+
+begin
+ prog = mplayer
+ button = UP
+ repeat = 3
+ config = seek +10
+end
+
+begin
+ prog = mplayer
+ button = LEFT
+# navigates, or skips back during playback or live tv.
+ config = seek -30
+end
+
+begin
+ prog = mplayer
+ button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+ config = seek +60
+end
+
+begin
+ prog = mplayer
+ button = DOWN
+ repeat = 3
+ config = seek -10
+end
+
+begin
+ prog = mplayer
+ button = EXIT
+ config = quit
+end
+
+begin
+ prog = mplayer
+ button = play
+ config = speed_set 1.0
+end
+
+begin
+ prog = mplayer
+ button = pause
+ config = pause
+end
+
+begin
+ prog = mplayer
+ button = STOP
+ config = quit
+end
+
+begin
+ prog = mplayer
+ # skip backward
+ button = |<<
+ config = seek -600
+end
+
+begin
+ prog = mplayer
+ # skip forward
+ button = >>|
+ config = seek +600
+end
+
+begin
+ prog = mplayer
+ # slow forward
+ button = <<
+ config = speed_mult 0.5
+end
+
+begin
+ prog = mplayer
+ # fast forward
+ button = >>
+ config = speed_mult 2.0
+end
+
+### Xine lirc setup By AnDy!
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = UP
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = DOWN
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = LEFT
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = RIGHT
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = >>
+repeat = 3
+#config = SpeedFaster
+config = SeekRelative+60
+end
+
+begin
+prog = xine
+button = <<
+repeat = 3
+#config = SpeedSlower
+config = SeekRelative-60
+end
+
+begin
+prog = xine
+button = VOL_UP
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VOL_DOWN
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = >>|
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = |<<
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = GREEN
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 3
+config = Quit
+end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg
new file mode 100644
index 0000000..4d1a5fe
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge
new file mode 100644
index 0000000..4987807
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge
@@ -0,0 +1,274 @@
+#
+# this config file was automatically generated
+# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
+#
+# contributed by Jens Leuschner <leuschner@gmx.net>
+#
+# brand: Hauppauge
+# model:
+# supported devices: WinTV primo; WinTV pci; WinTV radio
+#
+# This config file will work with both homebrew receivers and
+# original Hauppauge TV cards !!!
+#
+
+begin remote
+
+ name Hauppauge
+ bits 13
+ flags SHIFT_ENC
+ eps 30
+ aeps 100
+
+ one 950 830
+ zero 950 830
+ plead 960
+ gap 89584
+ repeat_bit 2
+
+ begin codes
+ TV 0x000000000000100F
+ RADIO 0x000000000000100C
+ FULL_SCREEN 0x000000000000102E
+ CH+ 0x0000000000001020
+ CH- 0x0000000000001021
+ VOL- 0x0000000000001011
+ VOL+ 0x0000000000001010
+ MUTE 0x000000000000100D
+ SOURCE 0x0000000000001022
+ 1 0x0000000000001001
+ 2 0x0000000000001002
+ 3 0x0000000000001003
+ 4 0x0000000000001004
+ 5 0x0000000000001005
+ 6 0x0000000000001006
+ 7 0x0000000000001007
+ 8 0x0000000000001008
+ 9 0x0000000000001009
+ 0 0x0000000000001000
+ RESERVED 0x000000000000101E
+ MINIMIZE 0x0000000000001026
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
+#
+# contributed by
+#
+# brand: Hauppauge
+# model no. of remote control:
+# devices being controlled by this remote: PVR 2/350
+#
+
+begin remote
+
+ name hauppauge_pvr
+ bits 13
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 969 811
+ zero 969 811
+ plead 1097
+ gap 114605
+ toggle_bit 2
+
+
+ begin codes
+ Power 0x00000000000017FD
+ Go 0x00000000000017FB
+ 1 0x00000000000017C1
+ 2 0x00000000000017C2
+ 3 0x00000000000017C3
+ 4 0x00000000000017C4
+ 5 0x00000000000017C5
+ 6 0x00000000000017C6
+ 7 0x00000000000017C7
+ 8 0x00000000000017C8
+ 9 0x00000000000017C9
+ Back/Exit 0x00000000000017DF
+ 0 0x00000000000017C0
+ Menu 0x00000000000017CD
+ Red 0x00000000000017CB
+ Green 0x00000000000017EE
+ Yellow 0x00000000000017F8
+ Blue 0x00000000000017E9
+ Ch+ 0x00000000000017E0
+ Ch- 0x00000000000017E1
+ Vol- 0x00000000000017D1
+ Vol+ 0x00000000000017D0
+ Ok 0x00000000000017E5
+ Mute 0x00000000000017CF
+ Blank 0x00000000000017CC
+ Full 0x00000000000017FC
+ Rewind 0x00000000000017F2
+ Play 0x00000000000017F5
+ Forward 0x00000000000017F4
+ Record 0x00000000000017F7
+ Stop 0x00000000000017F6
+ Pause 0x00000000000017F0
+ Replay 0x00000000000017E4
+ Skip 0x00000000000017DE
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
+#
+# contributed by
+#
+# brand: Hauppauge 350
+# Created: G.J. Werler (The Netherlands)
+# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
+# Date: 2004/11/28
+# model no. of remote control: Hauppauge A415-HPG
+# devices being controlled by this remote: PVR-350
+#
+
+begin remote
+
+ name Hauppauge_350
+ bits 13
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 969 811
+ zero 969 811
+ plead 1097
+ gap 114605
+ toggle_bit 2
+
+
+ begin codes
+ Go 0x00000000000017BB
+ Power 0x00000000000017BD
+ TV 0x000000000000179C
+ Videos 0x0000000000001798
+ Music 0x0000000000001799
+ Pictures 0x000000000000179A
+ Guide 0x000000000000179B
+ Radio 0x000000000000178C
+ Up 0x0000000000001794
+ Left 0x0000000000001796
+ Right 0x0000000000001797
+ Down 0x0000000000001795
+ OK 0x00000000000017A5
+ Back/Exit 0x000000000000179F
+ Menu/i 0x000000000000178D
+ Vol+ 0x0000000000001790
+ Vol- 0x0000000000001791
+ Prev.Ch 0x0000000000001792
+ Mute 0x000000000000178F
+ Ch+ 0x00000000000017A0
+ Ch- 0x00000000000017A1
+ Record 0x00000000000017B7
+ Stop 0x00000000000017B6
+ Rewind 0x00000000000017B2
+ Play 0x00000000000017B5
+ Forward 0x00000000000017B4
+ Replay/SkipBackward 0x00000000000017A4
+ Pause 0x00000000000017B0
+ SkipForward 0x000000000000179E
+ 1 0x0000000000001781
+ 2 0x0000000000001782
+ 3 0x0000000000001783
+ 4 0x0000000000001784
+ 5 0x0000000000001785
+ 6 0x0000000000001786
+ 7 0x0000000000001787
+ 8 0x0000000000001788
+ 9 0x0000000000001789
+ Asterix 0x000000000000178A
+ 0 0x0000000000001780
+ # 0x000000000000178E
+ Red 0x000000000000178B
+ Green 0x00000000000017AE
+ Yellow 0x00000000000017B8
+ Blue 0x00000000000017A9
+ end codes
+
+end remote
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
+#
+# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
+# members of linux user group Vorarlberg www.lugv.at
+#
+# for ir remote controler from Hauppauge WinTV Nexus-S
+# most of the keys are supported
+#
+# brand: Hauppauge
+# model no. of remote control: WinTV Nexus-S
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name Hauppauge_WinTV_Nexus-S
+ bits 13
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 944 828
+ zero 944 828
+ plead 980
+ gap 113932
+ min_repeat 1
+ toggle_bit 2
+
+
+ begin codes
+ Up 0x0000000000001794
+ Down 0x0000000000001795
+ Left 0x0000000000001796
+ Right 0x0000000000001797
+ Power 0x00000000000017BD
+ Ok 0x00000000000017A5
+ Menu 0x000000000000178D
+ Back 0x000000000000179F
+ Red 0x000000000000178B
+ Green 0x00000000000017AE
+ Yellow 0x00000000000017B8
+ Blue 0x00000000000017A9
+ 0 0x0000000000001780
+ 1 0x0000000000001781
+ 2 0x0000000000001782
+ 3 0x0000000000001783
+ 4 0x0000000000001784
+ 5 0x0000000000001785
+ 6 0x0000000000001786
+ 7 0x0000000000001787
+ 8 0x0000000000001788
+ 9 0x0000000000001789
+ Play 0x00000000000017B5
+ Pause 0x00000000000017B0
+ Stop 0x00000000000017B6
+ Record 0x00000000000017B7
+ FastFwd 0x00000000000017B4
+ FastRwd 0x00000000000017B2
+ Channel+ 0x00000000000017A0
+ Channel- 0x00000000000017A1
+ Volume+ 0x0000000000001790
+ Volume- 0x0000000000001791
+ Mute 0x000000000000178F
+ Timers 0x000000000000178A
+ Recordings 0x000000000000178E
+ Back 0x000000000000179F
+ Record 0x00000000000017B7
+ Pause 0x00000000000017B0
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge
new file mode 100644
index 0000000..d0f36e8
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge
@@ -0,0 +1,33 @@
+#
+# lircmd config file
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * RESERVED
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_IN * CH+
+MOVE_OUT * CH-
+
+BUTTON1_TOGGLE * 5
+BUTTON1_TOGGLE * RADIO
+BUTTON2_TOGGLE * VOL+
+BUTTON3_TOGGLE * SOURCE
+
+BUTTON1_CLICK * TV
+BUTTON1_CLICK * VOL-
+BUTTON3_CLICK * MUTE
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg
new file mode 100644
index 0000000..a40a1e8
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo
new file mode 100644
index 0000000..4b3d95a
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo
@@ -0,0 +1,63 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003
+#
+# contributed by Dimitris Michail <dmichail|yahoo.com>
+#
+# brand: Hercules
+# model no. of remote control: unknown
+# devices being controlled by this remote: Hercules SmartTV Stereo
+#
+# Works with module lirc_i2c, reports PV951 IR
+
+begin remote
+
+ name HERCULES_SMARTTV_STEREO
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 199964
+ toggle_bit 0
+
+
+ begin codes
+ POWER 0x00000000000048B7
+ MUTE 0x000000000000C837
+ PREVIEW 0x000000000000F00F
+ FULLSCREEN 0x00000000000038C7
+ AV/TV 0x0000000000008877
+ TELETEXT 0x00000000000008F7
+ 1 0x000000000000807F
+ 2 0x00000000000040BF
+ 3 0x000000000000C03F
+ 4 0x00000000000020DF
+ 5 0x000000000000A05F
+ 6 0x000000000000609F
+ 7 0x000000000000E01F
+ 8 0x00000000000010EF
+ 9 0x000000000000906F
+ 0 0x00000000000000FF
+ SNAPSHOT 0x00000000000050AF
+ 100+ 0x000000000000E817
+ CH+ 0x00000000000058A7
+ CH- 0x0000000000007887
+ VOL+ 0x000000000000D827
+ VOL- 0x000000000000F807
+ PAUSE 0x000000000000B04F
+ RECORD 0x000000000000708F
+ STOP 0x000000000000B847
+ PLAY 0x0000000000009867
+ TV_REPLAY 0x0000000000006897
+ TIME_SHIFT 0x00000000000028D7
+ SEEK_BACK 0x00000000000018E7
+ SEEK_FWD 0x00000000000030CF
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf
new file mode 100644
index 0000000..97bbf4c
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf
@@ -0,0 +1,88 @@
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006
+#
+# contributed by M.Brakemeier
+#
+# brand: SoundGraph
+# model no. of remote control: iMON-PAD
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name iMON-PAD
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 235965
+ min_repeat 1
+ toggle_bit 0
+
+ begin codes
+ AppExit 0x288195B7
+ Power 0x289115B7
+ Record 0x298115B7
+ Play 0x2A8115B7
+ Open 0x29B1d5B7
+ Rewind 0x2A8195B7
+ Pause 0x2A9115B7
+ FastForward 0x2B8115B7
+ PrevChapter 0x2B9115B7
+ Stop 0x2B9715B7
+ NextChapter 0x298195B7
+ Esc 0x2BB715B7
+ Eject 0x299395B7
+ AppLauncher 0x29B715B7
+ MultiMon 0x2AB195B7
+ TaskSwitcher 0x2A9395B7
+ Mute 0x2B9595B7
+ Vol+ 0x28A395B7
+ Vol- 0x28A595B7
+ Ch+ 0x289395B7
+ Ch- 0x288795B7
+ Timer 0x2B8395B7
+ 1 0x28B595B7
+ 2 0x2BB195B7
+ 3 0x28B195B7
+ 4 0x2A8595B7
+ 5 0x299595B7
+ 6 0x2AA595B7
+ 7 0x2B9395B7
+ 8 0x2A8515B7
+ 9 0x2AA115B7
+ 0 0x2BA595B7
+ ShiftTab 0x28B515B7
+ Tab 0x29A115B7
+ Red 0x2B8515B7 # MyMovie
+ Green 0x299195B7 # MyMusic
+ Blue 0x2BA115B7 # MyPhoto
+ Yellow 0x28A515B7 # MyTV
+ Bookmark 0x288515B7
+ Thumbnail 0x2AB715B7
+ AspectRatio 0x29A595B7
+ FullScreen 0x2AA395B7
+ Purple 0x29A295B7 # MyDVD
+ Menu 0x2BA385B7
+ Caption 0x298595B7
+ Language 0x2B8595B7
+ MouseKeyboard 0x299115B7
+ SelectSpace 0x2A9315B7
+ MouseMenu 0x28B715B7
+ MouseRightClick 0x688481B7
+ Enter 0x28A195B7
+ MouseLeftClick 0x688301B7
+ WindowsKey 0x2B8195B7
+ Backspace 0x28A115B7
+ Mouse_N 0x690281B7
+ Mouse_S 0x688291B7
+ Mouse_W 0x6A8281B7
+ Mouse_E 0x688A81B7
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc
new file mode 100644
index 0000000..3ad34d8
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc
@@ -0,0 +1,240 @@
+###################################
+# lircrc config as used by Stev391 June 2007
+# Not all of the buttons are configured yet, only the commonly used buttons
+###################################
+
+# Escape
+begin
+ prog = mythtv
+ button = AppExit
+ config = Esc
+ repeat = 3
+end
+
+# Escape Key 2
+begin
+ prog = mythtv
+ button = Esc
+ config = Esc
+end
+
+# Channel Up
+begin
+ prog = mythtv
+ button = Ch+
+ config = Up
+ repeat = 3
+end
+
+# Channel Down
+begin
+ prog = mythtv
+ button = Ch-
+ config = Down
+ repeat = 3
+end
+
+# Volume Up
+begin
+ prog = mythtv
+ button = Vol+
+ repeat = 3
+ config = Right
+end
+
+# Volume Down
+begin
+ prog = mythtv
+ button = Vol-
+ repeat = 3
+ config = Left
+end
+
+# Enter/Return
+begin
+ prog = mythtv
+ button = Enter
+ config = Return
+end
+
+# Menu Button
+begin
+ prog = mythtv
+ button = Menu
+ config = M
+end
+
+# Mute
+begin
+ prog = mythtv
+ button = Mute
+ config = F9
+end
+
+# Rewind
+begin
+ prog = mythtv
+ button = Rewind
+ config = PgUp
+end
+
+# Fast Forward
+begin
+ prog = mythtv
+ button = FastForward
+ config = PgDown
+end
+
+# Play
+begin
+ prog = mythtv
+ button = Play
+ config = P
+end
+
+# Pause
+begin
+ prog = mythtv
+ button = Pause
+ config = P
+end
+
+# Record
+begin
+ prog = mythtv
+ button = Record
+ config = R
+end
+
+# Stop
+begin
+ prog = mythtv
+ button = Stop
+ config = O
+end
+
+# Previous Track/Chapter
+begin
+ prog = mythtv
+ button = PrevChapter
+ config = Home
+end
+
+# Next Track/Chapter
+begin
+ prog = mythtv
+ button = NextChapter
+ config = End
+end
+
+# Jump Point to MythVideo
+begin
+ prog = mythtv
+ button = MyMovie
+ config = F12
+end
+
+# Jump Point to MythMusic
+begin
+ prog = mythtv
+ button = MyMusic
+ config = F11
+end
+
+# Jump Point to LiveTV
+begin
+ prog = mythtv
+ button = MyTV
+ config = F10
+end
+
+# Jump Point to Main Menu
+begin
+ prog = mythtv
+ button = Multimon
+ config = F2
+end
+
+# Jump Point to Myth Gallery
+begin
+ prog = mythtv
+ button = MyPhoto
+ config = F3
+end
+
+# Jump Point to Play DVD
+begin
+ prog = mythtv
+ button = MyDVD
+ config = F4
+end
+
+# Display Information
+begin
+ prog = mythtv
+ button = Caption
+ config = I
+end
+
+##############################
+# Numbers
+##############################
+begin
+ prog = mythtv
+ button = 0
+ config = 0
+end
+
+begin
+ prog = mythtv
+ button = 1
+ config = 1
+end
+
+begin
+ prog = mythtv
+ button = 2
+ config = 2
+end
+
+begin
+ prog = mythtv
+ button = 3
+ config = 3
+end
+
+begin
+ prog = mythtv
+ button = 4
+ config = 4
+end
+
+begin
+ prog = mythtv
+ button = 5
+ config = 5
+end
+
+begin
+ prog = mythtv
+ button = 6
+ config = 6
+end
+
+begin
+ prog = mythtv
+ button = 7
+ config = 7
+end
+
+begin
+ prog = mythtv
+ button = 8
+ config = 8
+end
+
+begin
+ prog = mythtv
+ button = 9
+ config = 9
+end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon
new file mode 100644
index 0000000..6875f3f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon
@@ -0,0 +1,79 @@
+#
+# contributed by Venky Raju (dev@venky.ws)
+#
+# brand: Soundgraph
+# model no. of remote control: iMON MultiMedian
+#
+# devices being controlled by this remote: HTPC
+#
+
+begin remote
+
+ name IMON_MultiMedian
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 130
+
+ header 9000 4500
+ one 625 1625
+ zero 625 375
+ ptrail 625
+ repeat 8875 2125
+ pre_data_bits 16
+ pre_data 0x609F
+ gap 100000
+ toggle_bit 0
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ App.Exit 0x00000000000000FF
+ Power 0x000000000000807F
+ 1 0x00000000000040BF
+ 2 0x000000000000C03F
+ 3 0x00000000000020DF
+ 4 0x000000000000A05F
+ 5 0x000000000000609F
+ 6 0x000000000000E01F
+ 7 0x00000000000010EF
+ 8 0x000000000000906F
+ 9 0x00000000000050AF
+ 0 0x000000000000D02F
+ Windows 0x00000000000030CF
+ Menu 0x000000000000B04F
+ App.Launcher 0x000000000000708F
+ Function 0x000000000000F00F
+ Task.Switcher 0x00000000000008F7
+ Back 0x0000000000008877
+ Select 0x00000000000048B7
+ Eject 0x0000000000009867
+ Delete 0x00000000000018E7
+ Up 0x000000000000C837
+ Right 0x0000000000006897
+ Down 0x000000000000E817
+ Left 0x00000000000028D7
+ Enter 0x000000000000A857
+ Vol- 0x00000000000058A7
+ Vol+ 0x000000000000D827
+ Mute 0x00000000000038C7
+ Play 0x000000000000B847
+ Pause 0x0000000000007887
+ Prev 0x000000000000F807
+ Next 0x00000000000002FD
+ Rew 0x000000000000827D
+ Fwd 0x00000000000042BD
+ Stop 0x000000000000C23D
+ Open 0x00000000000022DD
+ Rec 0x000000000000A25D
+ Bookmark 0x000000000000629D
+ Thumbnail 0x000000000000E21D
+ Aspect 0x00000000000012ED
+ DVD.Menu 0x000000000000926D
+ DVD.Caption 0x00000000000052AD
+ DVD.Language 0x000000000000D22D
+ Full.Screen 0x00000000000032CD
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad
new file mode 100644
index 0000000..e8b8818
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad
@@ -0,0 +1,84 @@
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005
+#
+# contributed by Venky Raju
+#
+# brand: iMON-New
+# model no. of remote control: iMON-PAD
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name iMON-PAD
+ bits 32
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 235965
+ min_repeat 1
+ toggle_bit 0
+
+
+ begin codes
+ AppExit 0x288195B7
+ Record 0x298115B7
+ Play 0x2A8115B7
+ SlowMotion 0x29B195B7
+ Rewind 0x2A8195B7
+ Pause 0x2A9115B7
+ FastForward 0x2B8115B7
+ PrevChapter 0x2B9115B7
+ Stop 0x2B9715B7
+ NextChapter 0x298195B7
+ Esc 0x2BB715B7
+ Eject 0x299395B7
+ AppLauncher 0x29B715B7
+ MultiMon 0x2AB195B7
+ TaskSwitcher 0x2A9395B7
+ Mute 0x2B9595B7
+ Vol+ 0x28A395B7
+ Vol- 0x28A595B7
+ Ch+ 0x289395B7
+ Ch- 0x288795B7
+ Timer 0x2B8395B7
+ 1 0x28B595B7
+ 2 0x2BB195B7
+ 3 0x28B195B7
+ 4 0x2A8595B7
+ 5 0x299595B7
+ 6 0x2AA595B7
+ 7 0x2B9395B7
+ 8 0x2A8515B7
+ 9 0x2AA115B7
+ 0 0x2BA595B7
+ ShiftTab 0x28B515B7
+ Tab 0x29A115B7
+ MyMovie 0x2B8515B7
+ MyMusic 0x299195B7
+ MyPhoto 0x2BA115B7
+ MyTV 0x28A515B7
+ Bookmark 0x288515B7
+ Thumbnail 0x2AB715B7
+ AspectRatio 0x29A595B7
+ FullScreen 0x2AA395B7
+ MyDVD 0x29A295B7
+ Menu 0x2BA385B7
+ Caption 0x298595B7
+ Language 0x2B8595B7
+ MouseKeyboard 0x299115B7
+ SelectSpace 0x2A9315B7
+ MouseMenu 0x28B715B7
+ MouseRightClick 0x688481B7
+ Enter 0x28A195B7
+ MouseLeftClick 0x688301B7
+ WindowsKey 0x2B8195B7
+ Backspace 0x28A115B7
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc
new file mode 100644
index 0000000..cf6d2fc
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc
@@ -0,0 +1,109 @@
+#
+# contributed by Venky Raju (dev@venky.ws)
+#
+# brand: Soundgraph
+# model no. of remote control: iMON RSC
+#
+# devices being controlled by this remote: HTPC
+#
+# Credit: Changwoo Ryu <cwryu@debian.org>
+#
+begin remote
+
+ name IMON_RSC
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 40
+ aeps 130
+
+ header 9000 4500
+ one 625 1625
+ zero 625 375
+ ptrail 625
+ repeat 8875 2125
+ pre_data_bits 16
+ pre_data 0x0108
+
+ gap 100000
+
+ begin codes
+ App.Exit 0x00000000000008F7
+ Power 0x000000000000F40B
+ ScreenSaver 0x00000000000052AD
+ Timer 0x000000000000926D
+ 1 0x0000000000002AD5
+ 2 0x000000000000AA55
+ 3 0x0000000000006A95
+ 4 0x000000000000EA15
+ 5 0x0000000000001AE5
+ 6 0x0000000000009A65
+ 7 0x0000000000005AA5
+ 8 0x000000000000DA25
+ 9 0x0000000000003AC5
+ 0 0x000000000000BA45
+ Desktop 0x000000000000817E
+ Max/Res 0x00000000000041BE
+ Esc 0x00000000000012ED
+ Windows 0x000000000000D22D
+ Menu 0x000000000000C13E
+ App.Launcher 0x000000000000A25D
+ Function 0x00000000000021DE
+ Task.Switcher 0x000000000000629D
+ Backspace 0x000000000000A15E
+ Mouse/Keyboard 0x000000000000619E
+ Space 0x000000000000E11E
+ Shift.Tab 0x0000000000007887
+ Enter 0x00000000000019E6
+ Tab 0x000000000000F807
+ L.Click 0x000000000000d827
+ DragNDrop 0x0000000000006897
+ R.Click 0x000000000000b847
+ Mute 0x00000000000011ee
+ Vol- 0x0000000000007a85
+ Vol+ 0x000000000000fa05
+ Play 0x00000000000032cd
+ Pause 0x000000000000b24d
+ Open 0x000000000000f20d
+ Prev 0x0000000000000af5
+ Next 0x0000000000008a75
+ Stop 0x000000000000728d
+ Rew 0x0000000000004ab5
+ F.Fwd 0x000000000000ca35
+ Full.Screen 0x000000000000916e
+ end codes
+
+end remote
+
+begin remote
+
+ name IMON_RSC_STICK
+ bits 4
+ flags SPACE_ENC
+ eps 40
+ aeps 130
+
+ header 2125 1875
+ one 625 1625
+ zero 625 375
+ ptrail 625
+
+ begin codes
+ STICK_N 0x0
+ STICK_S 0x1
+ STICK_E 0x2
+ STICK_W 0x3
+ STICK_NE 0x4
+ STICK_SW 0x5
+ STICK_SE 0x6
+ STICK_NW 0x7
+ STICK_NNE 0x8
+ STICK_SSW 0x9
+ STICK_SEE 0xa
+ STICK_NWW 0xb
+ STICK_NEE 0xc
+ STICK_SWW 0xd
+ STICK_SSE 0xe
+ STICK_NNW 0xf
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci
new file mode 100644
index 0000000..076d032
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci
@@ -0,0 +1,68 @@
+#
+# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI
+#
+# this config file was automatically generated
+# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003
+#
+# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org)
+#
+# brand: I-O Data Co.
+# model: GV-BCTV5/PCI
+# supported devices: This remote control comes with the TV Tuner card
+# GV-BCTV5/PCI from I-O Data Co. (Japan)
+#
+
+begin remote
+
+ name GV-BCTV5/PCI
+ bits 8
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 149949
+ toggle_bit 0
+
+
+ begin codes
+ TV 0x0000000000000042
+ FM 0x0000000000000022
+ EPG 0x0000000000000062
+ POWER 0x0000000000000002
+ 1 0x0000000000000052
+ 2 0x0000000000000032
+ 3 0x0000000000000072
+ 4 0x000000000000004A
+ 5 0x000000000000002A
+ 6 0x000000000000006A
+ 7 0x000000000000005A
+ 8 0x000000000000003A
+ 9 0x000000000000007A
+ 10 0x0000000000000046
+ 11 0x0000000000000026
+ 12 0x0000000000000066
+ LIVE 0x0000000000000012
+ TIME_SHIFT 0x000000000000000A
+ PLAY 0x000000000000001A
+ MULTI 0x0000000000000006
+ VIDEO 0x0000000000000056
+ SVIDEO 0x000000000000004E
+ CHANNEL_PLUS 0x0000000000000036
+ CHANNEL_MINUS 0x000000000000002E
+ VOLUME_PLUS 0x0000000000000076
+ VOLUME_MINUS 0x000000000000006E
+ MUTE 0x0000000000000016
+ PICTURE_SIZE 0x000000000000000E
+ PAUSE 0x000000000000005E
+ HALT 0x000000000000003E
+ RECORD 0x000000000000007E
+ STOP 0x000000000000001E
+ REWIND 0x0000000000000043
+ START 0x0000000000000023
+ FORWARD 0x0000000000000063
+ SYNC 0x0000000000000003
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one
new file mode 100644
index 0000000..b962433
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one
@@ -0,0 +1,62 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001
+#
+# contributed by Ulrich Mueller <ulrich.mueller42@web.de>
+#
+# brand: KNC ONE
+# model: TV Station (-/SE/PRO/RDS)
+#
+# brand: Anubis
+# model: Typhoon TView Tuner (-/Stereo/RDS)
+#
+
+begin remote
+
+ name lircd.conf
+ bits 8
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 199992
+ toggle_bit 0
+
+
+ begin codes
+ TV/FM 0x000000000000001C
+ OK 0x0000000000000015
+ F1 0x000000000000000B
+ POWER 0x0000000000000012
+ AV/TV 0x0000000000000011
+ TELETEXT 0x000000000000000F
+ FULLSCREEN 0x0000000000000013
+ MUTE 0x0000000000000010
+ 1 0x0000000000000001
+ 2 0x0000000000000002
+ 3 0x0000000000000003
+ 4 0x0000000000000004
+ 5 0x0000000000000005
+ 6 0x0000000000000006
+ 7 0x0000000000000007
+ 8 0x0000000000000008
+ 9 0x0000000000000009
+ 0 0x0000000000000000
+ CH+ 0x000000000000001A
+ CH- 0x000000000000001E
+ VOL+ 0x000000000000001B
+ VOL- 0x000000000000001F
+ SNAPSHOT 0x000000000000000A
+ 100+ 0x0000000000000017
+ RECORD 0x000000000000000D
+ PAUSE 0x000000000000000E
+ PLAY 0x000000000000001D
+ STOP 0x0000000000000019
+ MENU 0x0000000000000016
+ ESC 0x0000000000000014
+ - 0x0000000000000018
+ + 0x000000000000000C
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld
new file mode 100644
index 0000000..280c47d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld
@@ -0,0 +1,144 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003
+#
+# contributed by Denes Balatoni <pnis at coder.hu>
+#
+# brand: kworld
+# model no. of remote control: ?
+# devices being controlled by this remote: tv878r tuner card
+#
+
+begin remote
+
+ name kworld-878
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 8853 4526
+ one 533 1713
+ zero 533 589
+ ptrail 531
+ repeat 8853 2281
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 107839
+ toggle_bit 0
+
+
+ begin codes
+ power 0x0000000000007887
+ source 0x000000000000E01F
+ scan 0x00000000000038C7
+ mute 0x00000000000018E7
+ tv/fm 0x000000000000C03F
+ 1 0x000000000000807F
+ 2 0x000000000000D02F
+ 3 0x000000000000D827
+ fm_scan+ 0x000000000000F807
+ 4 0x000000000000A05F
+ 5 0x000000000000906F
+ 6 0x000000000000A857
+ fm_scan- 0x000000000000E817
+ 7 0x000000000000609F
+ 8 0x00000000000050AF
+ 9 0x00000000000048B7
+ fm_freq+ 0x00000000000030CF
+ 0 0x00000000000040BF
+ + 0x00000000000008F7
+ recall 0x000000000000C837
+ fm-freq- 0x00000000000020DF
+ record 0x00000000000000FF
+ stop 0x00000000000010EF
+ play 0x0000000000008877
+ minimze 0x000000000000F00F
+ ch+ 0x000000000000F807
+ zoom 0x0000000000009867
+ vol- 0x00000000000028D7
+ ch- 0x000000000000E817
+ vol+ 0x0000000000006897
+ snapshot 0x00000000000058A7
+ mts 0x000000000000B04F
+ function- 0x00000000000020DF
+ function 0x000000000000708F
+ function+ 0x00000000000030CF
+ reset 0x000000000000B847
+ end codes
+
+end remote
+
+
+#
+# this config file was automatically generated
+# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003
+#
+# contributed by Denes Balatoni <pnis at coder.hu>
+# Modified by Daniel Foote <freefoote at dview dot net> to
+# work with remote that came with DVB-T card.
+#
+# brand: kworld
+# model no. of remote control: ?
+# devices being controlled by this remote: tv878r tuner card
+#
+
+begin remote
+
+ name KWorld_DVB-T
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 8853 4526
+ one 533 1713
+ zero 533 589
+ ptrail 531
+ repeat 8853 2281
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 107839
+ toggle_bit 0
+
+
+ begin codes
+ ch- 0x0000000000007887
+ 7 0x000000000000E01F
+ preview 0x00000000000038C7
+ zoom 0x00000000000018E7
+ 3 0x000000000000C03F
+ 1 0x000000000000807F
+ epg 0x000000000000D02F
+ vol+ 0x000000000000D827
+ vol- 0x000000000000F807
+ 5 0x000000000000A05F
+ 9 0x000000000000906F
+ reset 0x000000000000A857
+ turnleft 0x000000000000E817
+ 6 0x000000000000609F
+ 0 0x00000000000050AF
+ power 0x00000000000048B7
+ scan 0x00000000000030CF
+ 2 0x00000000000040BF
+ mute 0x00000000000008F7
+ snap 0x000000000000C837
+ 4 0x00000000000020DF
+ turnup 0x00000000000000FF
+ 8 0x00000000000010EF
+ backward 0x0000000000008877
+ source 0x000000000000F00F
+ forward 0x0000000000009867
+ pip 0x00000000000028D7
+ ch- 0x000000000000E817
+ play 0x0000000000006897
+ ch+ 0x00000000000058A7
+ stop 0x000000000000B04F
+ function- 0x00000000000020DF
+ pause 0x000000000000708F
+ function+ 0x00000000000030CF
+ rec 0x000000000000B847
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000
new file mode 100644
index 0000000..3adfd4b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000
@@ -0,0 +1,75 @@
+#
+# this config file was written on Mon Dec 13 23:51:16 MET 2004
+# by Thomas Reitmayr (treitmayr@yahoo.com)
+#
+# brand: Leadtek
+# model: Y0400052 (bundeled with Winfast PVR2000 TV-card)
+#
+# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a
+# limitation of the remote control.
+#
+
+
+begin remote
+
+ name PVR2000
+ bits 8
+ flags SHIFT_ENC
+ gap 120000
+
+ begin codes
+ POWER 0x0000000000000070
+ TV 0x0000000000000026
+ FM 0x0000000000000027
+ DVD 0x0000000000000028
+ RED 0x000000000000003B
+ GREEN 0x000000000000003C
+ YELLOW 0x000000000000003D
+ BLUE 0x000000000000003E
+ TELETEXT 0x000000000000006F
+ SLEEP 0x0000000000000030
+ MUTE 0x0000000000000064
+ BOSS_KEY 0x0000000000000039
+ CH_UP 0x000000000000007C
+ CH_DOWN 0x0000000000000060
+ VOL_DOWN 0x0000000000000078
+ VOL_UP 0x0000000000000074
+ ENTER 0x0000000000000063
+ CC 0x0000000000000020
+ FULLSCREEN 0x0000000000000073
+ MENU 0x000000000000003F
+ SCAN 0x0000000000000021
+ REPLAY 0x0000000000000032
+ PLAY 0x0000000000000033
+ SKIP 0x0000000000000034
+ OSD 0x0000000000000022
+ BACK 0x0000000000000024
+ STOP 0x0000000000000036
+ FORWARD 0x0000000000000025
+ LANGUAGE 0x0000000000000023
+ 1 0x0000000000000075
+ 2 0x0000000000000076
+ 3 0x0000000000000077
+ 4 0x0000000000000079
+ 5 0x000000000000007A
+ 6 0x000000000000007B
+ 7 0x000000000000007D
+ 8 0x000000000000007E
+ 9 0x000000000000007F
+ 0 0x0000000000000062
+ . 0x0000000000000031
+ RECALL 0x0000000000000061
+ VIDEO 0x000000000000006E
+ AUDIO 0x000000000000006B
+ DISPLAY 0x0000000000000066
+ SNAPSHOT 0x0000000000000038
+ PIP 0x000000000000003A
+ RECSTOP 0x0000000000000036
+ REC 0x0000000000000037
+ TIMESHIFT 0x0000000000000035
+
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007
new file mode 100644
index 0000000..47e5b8e
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007
@@ -0,0 +1,86 @@
+# Made by Leandro Lucarella <luca@lugmen.org.ar>
+#
+# brand: Leadtek
+# model: RM-0007 (bundeled with WinView 601TV card)
+#
+# Based on Winfast TV200:
+# modified by CB
+#
+# contributed by Erik Christiansson, aka Sci
+# www.alphafish.com
+# erik@alphafish.com
+#
+# modifications based on the config files from
+# Juan Toledo <toledo@users.sourceforge.net> and
+# Markus Lischka <mlischka@users.sourceforge.net>
+#
+# With some modification based on a patch for WinView 601 made by
+# Juan FC. <juan@kili.com.ar>
+#
+# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to
+# be a hardware limitation.
+#
+
+begin remote
+
+ name RM-0007
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 40
+ aeps 100
+
+ header 9000 4500
+ one 629 1617
+ zero 629 495
+ ptrail 632
+ repeat 9000 2250
+ pre_data_bits 16
+ pre_data 0xC03F
+ gap 108000
+ toggle_bit 0
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+# 1st row of buttons
+ POWER 0x00000000000000FF
+ MENU 0x000000000000807F
+ FM 0x00000000000040BF
+ PC/TV 0x000000000000C03F
+# volume/channel
+ VOL_UP 0x00000000000020DF
+ VOL_DOWN 0x00000000000010EF
+ CH_UP 0x00000000000030CF
+ CH_DOWN 0x00000000000008F7
+# numbers pad
+ 1 0x000000000000A05F
+ 2 0x000000000000609F
+ 3 0x000000000000E01F
+ 4 0x000000000000906F
+ 5 0x00000000000050AF
+ 6 0x000000000000D02F
+ 7 0x000000000000B04F
+ 8 0x000000000000708F
+ 9 0x000000000000F00F
+ RETURN 0x0000000000008877
+ 0 0x00000000000048B7
+ DISPLAY 0x000000000000C837
+# unknown icon buttons
+ HELP 0x00000000000038C7
+ SCAN 0x000000000000A857
+ OSD 0x0000000000006897
+ OPTIONS 0x000000000000E817
+# labeled buttons
+ MUTE 0x00000000000028D7
+ MTS 0x000000000000D827
+ VIDEO 0x0000000000007887
+ CC 0x000000000000F807
+# color dots buttons
+ RED 0x00000000000018E7
+ GREEN 0x0000000000009867
+ YELLOW 0x00000000000058A7
+ BLUE 0x000000000000B847
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010
new file mode 100644
index 0000000..e0efcba
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010
@@ -0,0 +1,101 @@
+#
+# this config file was automatically generated
+# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002
+#
+# modified by CB
+#
+# contributed by Erik Christiansson, aka Sci
+# www.alphafish.com
+# erik@alphafish.com
+#
+# brand: Leadtek
+# model: RM-0010 (bundeled with TV2000 TV-card)
+#
+# modifications based on the config files from
+# Juan Toledo <toledo@users.sourceforge.net> and
+# Markus Lischka <mlischka@users.sourceforge.net>
+# Reza Naima
+#
+# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to
+# be a hardware limitation.
+#
+
+
+begin remote
+
+ name RM-0010
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 40
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ repeat 9000 2250
+ pre_data_bits 16
+ pre_data 0xC03F
+ gap 108000
+ toggle_bit 0
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ POWER 0x00000000000000FF
+ TV/FM 0x00000000000040BF
+ SCAN 0x000000000000A857
+ DISPLAY 0x0000000000006897
+ 1 0x000000000000A05F
+ 2 0x000000000000609F
+ 3 0x000000000000E01F
+ 4 0x000000000000906F
+ 5 0x00000000000050AF
+ 6 0x000000000000D02F
+ 7 0x000000000000B04F
+ 8 0x000000000000708F
+ 9 0x000000000000F00F
+ 0 0x00000000000048B7
+ RECALL 0x0000000000008877
+ ENTER 0x000000000000C837
+ CC 0x000000000000F807
+ MTS 0x000000000000D827
+ FINE_DOWN 0x0000000000009867
+ FINE_UP 0x00000000000018E7
+ VIDEO 0x0000000000007887
+ MUTE 0x00000000000028D7
+ CH_UP 0x00000000000030CF
+ CH_DOWN 0x00000000000008F7
+ VOL_DOWN 0x00000000000010EF
+ VOL_UP 0x00000000000020DF
+ FULLSCREEN 0x000000000000C03F
+
+# The following are only supported by the remote control bundled with
+# the WinFast TV 2000 XP Deluxe card.
+
+ SLEEP 0x00000000000002FD
+ BOSS_KEY 0x000000000000926D
+ RED 0x000000000000D22D
+ GREEN 0x00000000000032CD
+ YELLOW 0x000000000000B24D
+ BLUE 0x000000000000728D
+ PIP 0x00000000000052AD
+ . 0x000000000000827D
+ BACK 0x00000000000042BD
+ PLAY 0x000000000000C23D
+ NEXT 0x00000000000022DD
+ TIMESHIFT 0x000000000000A25D
+ STOP 0x000000000000629D
+ REC 0x000000000000E21D
+ SNAPSHOT 0x00000000000012ED
+
+# Only found on CoolCommand remote
+
+ REPEAT 0x000000000000884B
+ TELETEXT 0x000000000000F807
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007
new file mode 100644
index 0000000..ef1992a
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007
@@ -0,0 +1,36 @@
+#
+# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control).
+#
+# Made by Leandro Lucarella <luca@lugmen.org.ar> based on mainstream lirc
+# Leadtek WinFast2000TV (RM-0010 remote control).
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * BLUE
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_IN * CH_UP
+MOVE_OUT * CH_DOWN
+
+BUTTON1_TOGGLE * RETURN
+BUTTON2_TOGGLE * 0
+BUTTON3_TOGGLE * DISPLAY
+
+BUTTON1_CLICK * MENU
+BUTTON1_CLICK * 5
+BUTTON2_CLICK * FM
+BUTTON3_CLICK * PC/TV
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010
new file mode 100644
index 0000000..ce0eff4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010
@@ -0,0 +1,36 @@
+#
+# lircmd config file
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 2 30 5
+
+ACTIVATE * SCAN
+
+MOVE_N * 2
+MOVE_N * CH_UP
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_E * VOL_UP
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_S * CH_DOWN
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_W * VOL_DOWN
+MOVE_NW * 1
+MOVE_IN * VIDEO
+MOVE_OUT * MUTE
+
+BUTTON1_TOGGLE * RECALL
+BUTTON2_TOGGLE * 0
+BUTTON3_TOGGLE * ENTER
+
+BUTTON1_CLICK * FULLSCREEN
+BUTTON2_CLICK * FINE_DOWN
+BUTTON3_CLICK * FINE_UP
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo
new file mode 100644
index 0000000..6402ed0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo
@@ -0,0 +1,87 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002
+#
+# contributed by Jarek Zuk
+#
+# brand: LiveView
+# devices being controlled by this remote:
+# FlyVideo II
+# FlyVideo'98
+# FlyVideo 98/FM /2000S
+# Flyvideo 98FM (LR50Q)
+# Typhoon TView TV/FM Tuner
+#
+
+begin remote
+
+ name flyvideo
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ repeat 9000 4500
+ pre_data_bits 26
+ pre_data 0x01A1F2F
+ gap 108000
+ toggle_bit 0
+
+ frequency 37916
+ duty_cycle 33
+
+ begin codes
+ 0 0x000000000000F00F
+ 1 0x000000000000C03F
+ 2 0x00000000000020DF
+ 3 0x000000000000A05F
+ 4 0x000000000000E01F
+ 5 0x00000000000010EF
+ 6 0x000000000000906F
+ 7 0x000000000000D02F
+ 8 0x00000000000030CF
+ 9 0x000000000000B04F
+ POWER 0x00000000000000FF
+ MOUSE_MODE 0x000000000000807F
+ FULL_SCREEN 0x00000000000040BF
+ CHAN_PLUS 0x00000000000048B7
+ CHAN_MINUS 0x000000000000C837
+ CANCEL 0x000000000000F807
+ ENTER 0x00000000000008F7
+ VOL_PLUS 0x00000000000028D7
+ VOL_MINUS 0x000000000000E817
+ MENU 0x000000000000609F
+ UP 0x000000000000708F
+ DOWN 0x0000000000009867
+ LEFT 0x000000000000609F
+ RIGHT 0x000000000000A857
+ INC 0x00000000000050AF
+ DEC 0x0000000000006897
+ ESC 0x00000000000058A7
+ MUTE 0x000000000000D827
+ RETURN 0x00000000000018E7
+ CENTER 0x000000000000C837
+
+ CHANELS 0x00000000000047B8
+ REV 0x0000000000008778
+ FWD 0x000000000000C738
+ VIDEO 0x0000000000008877
+
+# from FlyVideo II config file
+ Audio 0x000000000000A857
+# newly added by Jarek Zuk
+ SQUARE 0x000000000000B847
+ TAB_LEFT 0x0000000000007887
+ TAB_RIGHT 0x00000000000038C7
+ CENTER 0x000000000000C837
+ LEFT 0x00000000000048B7
+
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo
new file mode 100644
index 0000000..71cac36
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo
@@ -0,0 +1,33 @@
+#
+# lircmd config file for FlyVideo98 remote control
+# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl>
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+#ACCELERATOR 2 30 5
+
+ACTIVATE * MOUSE_MODE
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+
+# These are lircmd-0.5.5 extensions
+MOVE_IN * VOL_PLUS
+MOVE_OUT * VOL_MINUS
+
+BUTTON1_CLICK * CANCEL
+BUTTON2_CLICK * 0
+BUTTON3_CLICK * ENTER
+
+BUTTON1_TOGGLE * UP
+BUTTON2_TOGGLE * VIDEO
+BUTTON3_TOGGLE * INC
diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo
new file mode 100644
index 0000000..2175201
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo
@@ -0,0 +1,131 @@
+#
+# This is an example of ~/.lircrc file
+# It is a copy of actual setup from my home machine.
+# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl>
+#
+begin
+ button = MOUSE_MODE
+ mode = mouse
+end
+begin
+ prog = irexec
+ button = FULL_SCREEN
+ config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 &
+ mode = tv
+ flags = once
+end
+begin
+ button = ESC
+ mode = system
+ flags = once
+end
+begin system
+ begin
+ prog = irexec
+ button = 1
+ button = 2
+ button = 3
+ button = 6
+ button = 3
+ button = 6
+ config = shutdown -r now
+ flags = mode
+ end
+end system
+
+begin tv
+ begin
+ prog = irxevent
+ button = POWER
+ config = Key q xawtv
+ flags = mode
+ end
+ begin
+ prog = irxevent
+ button = FULL_SCREEN
+ config = Key f xawtv
+ config = Key f xawtv
+ repeat = 1
+ end
+ begin
+ prog = irxevent
+ button = CHAN_MINUS
+ repeat = 1
+ config = Key Page_Down xawtv
+ end
+ begin
+ prog = irxevent
+ button = CHAN_PLUS
+ repeat = 1
+ config = Key Page_Up xawtv
+ end
+ begin
+ prog = irxevent
+ button = MENU
+ repeat = 1
+ config = Key c xawtv
+ end
+ begin
+ prog = irxevent
+ button = CHANELS
+ repeat = 1
+ config = Key ctrl-z xawtv
+ end
+ begin
+ prog = irxevent
+ button = MUTE
+ config = Key Return xawtv
+ end
+ begin
+ prog = irxevent
+ button = VOL_PLUS
+ repeat = 1
+ config = Key KP_Add xawtv
+ end
+ begin
+ prog = irxevent
+ button = VOL_MINUS
+ repeat = 1
+ config = Key KP_Subtract xawtv
+ end
+ begin
+ prog = irexec
+ button = 1
+ config = xawtv-remote setstation 0
+ end
+ begin
+ prog = irexec
+ button = 2
+ config = xawtv-remote setstation 1
+ end
+ begin
+ prog = irexec
+ button = 3
+ config = xawtv-remote setstation 2
+ end
+ begin
+ prog = irexec
+ button = 4
+ config = xawtv-remote setstation 3
+ end
+ begin
+ prog = irexec
+ button = 5
+ config = xawtv-remote setstation 4
+ end
+ begin
+ prog = irexec
+ button = 6
+ config = xawtv-remote setstation 5
+ end
+ begin
+ prog = irexec
+ button = 7
+ config = xawtv-remote setstation 6
+ end
+ begin
+ prog = irexec
+ button = 8
+ config = xawtv-remote setstation 7
+ end
+end tv
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech
new file mode 100644
index 0000000..1960b6f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech
@@ -0,0 +1,111 @@
+#
+#
+# contributed by Isaac Lauer
+#
+# brand: Logitech
+# model: Value Infrared Remote Control
+# supported devices:
+#
+
+begin remote
+
+ name Logitech
+ bits 8
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 0 833
+ zero 833 0
+ pre_data_bits 8
+ pre_data 0xA0
+ gap 29858
+ repeat_bit 0
+
+ begin codes
+ POWER 0x0000000000000002
+ 1 0x0000000000000015
+ 2 0x0000000000000016
+ 3 0x0000000000000014
+ 4 0x0000000000000018
+ 5 0x0000000000000019
+ 6 0x0000000000000017
+ 7 0x000000000000001C
+ 8 0x000000000000001B
+ 9 0x000000000000001A
+ 0 0x000000000000001D
+ PAUSE 0x0000000000000013
+ EJECT 0x0000000000000011
+ SEEK- 0x000000000000000E
+ PLAY 0x000000000000000F
+ SEEK+ 0x0000000000000010
+ STOP 0x0000000000000012
+ HELP 0x0000000000000001
+ CH- 0x000000000000000D
+ CH+ 0x000000000000000A
+ VOL- 0x000000000000000C
+ VOL+ 0x0000000000000009
+ * 0x000000000000001F
+ # 0x000000000000001E
+ MUTE 0x000000000000000B
+ BUTTONL_DOWN 0x0000000000000039
+ BUTTONR_DOWN 0x000000000000003A
+ BUTTON_UP 0x0000000000000038
+ ENTER 0x0000000000000008
+ CLOSE 0x0000000000000023
+ TV 0x0000000000000004
+ GDE 0x0000000000000005
+ CD 0x0000000000000006
+ MSG 0x0000000000000007
+ PHONE 0x0000000000000003
+ MOUSE_N 0x0000000000000040
+ MOUSE_NNE 0x0000000000000041
+ MOUSE_NE 0x0000000000000042
+ MOUSE_NEE 0x0000000000000043
+ MOUSE_E 0x0000000000000044
+ MOUSE_SEE 0x0000000000000045
+ MOUSE_SE 0x0000000000000046
+ MOUSE_SSE 0x0000000000000047
+ MOUSE_S 0x0000000000000048
+ MOUSE_SSW 0x0000000000000049
+ MOUSE_SW 0x000000000000004A
+ MOUSE_SWW 0x000000000000004B
+ MOUSE_W 0x000000000000004C
+ MOUSE_NWW 0x000000000000004D
+ MOUSE_NW 0x000000000000004E
+ MOUSE_NNW 0x000000000000004F
+ MOUSE_N 0x0000000000000050
+ MOUSE_NNE 0x0000000000000051
+ MOUSE_NE 0x0000000000000052
+ MOUSE_NEE 0x0000000000000053
+ MOUSE_E 0x0000000000000054
+ MOUSE_SEE 0x0000000000000055
+ MOUSE_SE 0x0000000000000056
+ MOUSE_SSE 0x0000000000000057
+ MOUSE_S 0x0000000000000058
+ MOUSE_SSW 0x0000000000000059
+ MOUSE_SW 0x000000000000005A
+ MOUSE_SWW 0x000000000000005B
+ MOUSE_W 0x000000000000005C
+ MOUSE_NWW 0x000000000000005D
+ MOUSE_NW 0x000000000000005E
+ MOUSE_NNW 0x000000000000005F
+ MOUSE_N 0x0000000000000060
+ MOUSE_NNE 0x0000000000000061
+ MOUSE_NE 0x0000000000000062
+ MOUSE_NEE 0x0000000000000063
+ MOUSE_E 0x0000000000000064
+ MOUSE_SEE 0x0000000000000065
+ MOUSE_SE 0x0000000000000066
+ MOUSE_SSE 0x0000000000000067
+ MOUSE_S 0x0000000000000068
+ MOUSE_SSW 0x0000000000000069
+ MOUSE_SW 0x000000000000006A
+ MOUSE_SWW 0x000000000000006B
+ MOUSE_W 0x000000000000006C
+ MOUSE_NWW 0x000000000000006D
+ MOUSE_NW 0x000000000000006E
+ MOUSE_NWW 0x000000000000006F
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech
new file mode 100644
index 0000000..d8067f5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech
@@ -0,0 +1,64 @@
+#
+# lircmd config file for the Logitech control
+#
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 1 3 2
+
+#ACTIVATE * MENU
+
+
+MOVE_N Logitech MOUSE_N
+MOVE_N Logitech MOUSE_N
+
+MOVE_N Logitech MOUSE_NNE
+MOVE_NE Logitech MOUSE_NNE
+
+MOVE_NE Logitech MOUSE_NE
+MOVE_NE Logitech MOUSE_NE
+
+MOVE_E Logitech MOUSE_NEE
+MOVE_NE Logitech MOUSE_NEE
+
+MOVE_E Logitech MOUSE_E
+MOVE_E Logitech MOUSE_E
+
+MOVE_E Logitech MOUSE_SEE
+MOVE_SE Logitech MOUSE_SEE
+
+MOVE_SE Logitech MOUSE_SE
+MOVE_SE Logitech MOUSE_SE
+
+MOVE_S Logitech MOUSE_SSE
+MOVE_SE Logitech MOUSE_SSE
+
+MOVE_S Logitech MOUSE_S
+MOVE_S Logitech MOUSE_S
+
+MOVE_S Logitech MOUSE_SSW
+MOVE_SW Logitech MOUSE_SSW
+
+MOVE_SW Logitech MOUSE_SW
+MOVE_SW Logitech MOUSE_SW
+
+MOVE_W Logitech MOUSE_SWW
+MOVE_SW Logitech MOUSE_SWW
+
+MOVE_W Logitech MOUSE_W
+MOVE_W Logitech MOUSE_W
+
+MOVE_W Logitech MOUSE_NWW
+MOVE_NW Logitech MOUSE_NWW
+
+MOVE_NW Logitech MOUSE_NW
+MOVE_NW Logitech MOUSE_NW
+
+MOVE_N Logitech MOUSE_NNW
+MOVE_NW Logitech MOUSE_NNW
+
+BUTTON1_DOWN Logitech BUTTONL_DOWN
+BUTTON2_DOWN Logitech BUTTONR_DOWN
+
+BUTTON1_UP Logitech BUTTON_UP
+BUTTON2_UP Logitech BUTTON_UP
diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf
new file mode 100644
index 0000000..ec3b73e
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf
@@ -0,0 +1,88 @@
+#
+# RC-6 config file
+#
+# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
+# http://home.hccnet.nl/m.majoor/pronto.pdf
+#
+# used by: Philips
+#
+#########
+#
+# Philips Media Center Edition remote control
+# For use with the USB MCE ir receiver
+#
+# Dan Conti dconti|acm.wwu.edu
+#
+# Radio, Print, RecTV are only available on the HP Media Center remote control
+#
+
+begin remote
+
+ name mceusb
+ bits 16
+ flags RC6|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 2667 889
+ one 444 444
+ zero 444 444
+ pre_data_bits 21
+ pre_data 0x37FF0
+ gap 105000
+ toggle_bit 22
+ rc6_mask 0x100000000
+
+
+ begin codes
+
+# starts at af
+ Radio 0x00007baf
+ Print 0x00007bb1
+ Videos 0x00007bb5
+ Pictures 0x00007bb6
+ RecTV 0x00007bb7
+ Music 0x00007bb8
+ TV 0x00007bb9
+# no ba - d8
+ Guide 0x00007bd9
+ LiveTV 0x00007bda
+ DVD 0x00007bdb
+ Back 0x00007bdc
+ OK 0x00007bdd
+ Right 0x00007bde
+ Left 0x00007bdf
+ Down 0x00007be0
+ Up 0x00007be1
+# no e2,e3
+ Replay 0x00007be4
+ Skip 0x00007be5
+ Stop 0x00007be6
+ Pause 0x00007be7
+ Record 0x00007be8
+ Play 0x00007be9
+ Rewind 0x00007bea
+ Forward 0x00007beb
+ ChanDown 0x00007bec
+ ChanUp 0x00007bed
+ VolDown 0x00007bee
+ VolUp 0x00007bef
+ More 0x00007bf0
+ Mute 0x00007bf1
+ Home 0x00007bf2
+ Power 0x00007bf3
+ Enter 0x00007bf4
+ Clear 0x00007bf5
+ Nine 0x00007bf6
+ Eight 0x00007bf7
+ Seven 0x00007bf8
+ Six 0x00007bf9
+ Five 0x00007bfa
+ Four 0x00007bfb
+ Three 0x00007bfc
+ Two 0x00007bfd
+ One 0x00007bfe
+ Zero 0x00007bff
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb
new file mode 100644
index 0000000..041c2cb
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb
@@ -0,0 +1,104 @@
+#
+# RC-6 config file
+#
+# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
+# http://home.hccnet.nl/m.majoor/pronto.pdf
+#
+# used by: Philips
+#
+#########
+#
+# Philips Media Center Edition remote control
+# For use with the USB MCE ir receiver
+#
+# Dan Conti dconti|acm.wwu.edu
+#
+# Updated with codes for MCE 2005 Remote additional buttons
+# *, #, Teletext, Red, Green, Yellow & Blue Buttons
+# Note: TV power button transmits no code until programmed.
+# Updated 12th September 2005
+# Graham Auld - mce|graham.auld.me.uk
+#
+# Radio, Print, RecTV are only available on the HP Media Center remote control
+#
+
+begin remote
+
+ name mceusb
+ bits 16
+ flags RC6|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 2667 889
+ one 444 444
+ zero 444 444
+ pre_data_bits 21
+ pre_data 0x37FF0
+ gap 105000
+ toggle_bit 22
+ rc6_mask 0x100000000
+
+
+ begin codes
+
+ Blue 0x00007ba1
+ Yellow 0x00007ba2
+ Green 0x00007ba3
+ Red 0x00007ba4
+ Teletext 0x00007ba5
+
+# starts at af
+ Radio 0x00007baf
+ Print 0x00007bb1
+ Videos 0x00007bb5
+ Pictures 0x00007bb6
+ RecTV 0x00007bb7
+ Music 0x00007bb8
+ TV 0x00007bb9
+# no ba - d8
+
+ Guide 0x00007bd9
+ LiveTV 0x00007bda
+ DVD 0x00007bdb
+ Back 0x00007bdc
+ OK 0x00007bdd
+ Right 0x00007bde
+ Left 0x00007bdf
+ Down 0x00007be0
+ Up 0x00007be1
+
+ Star 0x00007be2
+ Hash 0x00007be3
+
+ Replay 0x00007be4
+ Skip 0x00007be5
+ Stop 0x00007be6
+ Pause 0x00007be7
+ Record 0x00007be8
+ Play 0x00007be9
+ Rewind 0x00007bea
+ Forward 0x00007beb
+ ChanDown 0x00007bec
+ ChanUp 0x00007bed
+ VolDown 0x00007bee
+ VolUp 0x00007bef
+ More 0x00007bf0
+ Mute 0x00007bf1
+ Home 0x00007bf2
+ Power 0x00007bf3
+ Enter 0x00007bf4
+ Clear 0x00007bf5
+ Nine 0x00007bf6
+ Eight 0x00007bf7
+ Seven 0x00007bf8
+ Six 0x00007bf9
+ Five 0x00007bfa
+ Four 0x00007bfb
+ Three 0x00007bfc
+ Two 0x00007bfd
+ One 0x00007bfe
+ Zero 0x00007bff
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb
new file mode 100644
index 0000000..3738bfa
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb
@@ -0,0 +1,393 @@
+# lircrc.mceusb
+
+###################
+#
+# MythTV
+#
+###################
+begin
+ prog = mythtv
+ button = One
+ config = 1
+end
+
+begin
+ prog = mythtv
+ button = Two
+ config = 2
+end
+
+begin
+ prog = mythtv
+ button = Three
+ config = 3
+end
+
+begin
+ prog = mythtv
+ button = Four
+ config = 4
+end
+
+begin
+ prog = mythtv
+ button = Five
+ config = 5
+end
+
+begin
+ prog = mythtv
+ button = Six
+ config = 6
+end
+
+begin
+ prog = mythtv
+ button = Seven
+ config = 7
+end
+
+begin
+ prog = mythtv
+ button = Eight
+ config = 8
+end
+
+begin
+ prog = mythtv
+ button = Nine
+ config = 9
+end
+
+begin
+ prog = mythtv
+ button = Zero
+ config = 0
+end
+
+begin
+ prog = mythtv
+ button = Back
+ config = Esc
+end
+
+begin
+ prog = mythtv
+ button = Guide
+ config = M
+end
+
+begin
+ prog = mythtv
+ button = More
+ config = I
+end
+
+begin
+ prog = mythtv
+ button = VolDown
+ config = F10
+end
+
+begin
+ prog = mythtv
+ button = VolUp
+ config = F11
+end
+
+begin
+ prog = mythtv
+ button = Up
+ config = Up
+end
+
+begin
+ prog = mythtv
+ button = Down
+ config = Down
+end
+
+begin
+ prog = mythtv
+ button = Left
+ config = Left
+end
+
+begin
+ prog = mythtv
+ button = Right
+ config = Right
+end
+
+begin
+ prog = mythtv
+ button = Play
+ config = Return
+end
+
+begin
+ prog = mythtv
+ button = OK
+ config = Return
+end
+
+begin
+ prog = mythtv
+ button = Mute
+ config = |
+end
+
+begin
+ prog = mythtv
+ button = Rewind
+ config = Left
+end
+
+begin
+ prog = mythtv
+ button = Forward
+ config = Right
+end
+
+begin
+ prog = mythtv
+ button = Record
+ config = R
+end
+
+begin
+ prog = mythtv
+ button = Stop
+ config = O
+end
+
+begin
+ prog = mythtv
+ button = Pause
+ config = P
+end
+
+# Use for backwards commercial skip
+begin
+ prog = mythtv
+ button = Replay
+ config = Q
+end
+
+# Use for forward commercial skip
+begin
+ prog = mythtv
+ button = Skip
+ config = Z
+end
+
+
+###################
+#
+# MPlayer
+#
+###################
+begin
+ prog = mplayer
+ button = Stop
+ config = quit
+end
+
+begin
+ prog = mplayer
+ button = Play
+ config = seek +1
+end
+
+begin
+ prog = mplayer
+ button = More
+ config = osd
+end
+
+begin
+ prog = mplayer
+ button = Replay
+ config = seek -10
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = Skip
+ config = seek +10
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = Rewind
+ config = seek -30
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = Forward
+ config = seek +30
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = Pause
+ config = pause
+end
+
+begin
+ prog = mplayer
+ button = VolUp
+ config = volume +1
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = VolDown
+ config = volume -1
+ repeat = 1
+end
+
+begin
+ prog = mplayer
+ button = Mute
+ config = mute
+end
+
+###################
+#
+# Xine
+#
+###################
+# Xine lirc setup
+begin
+prog = xine
+button = Play
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = Stop
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = Back
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = Pause
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = Up
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = Down
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = Left
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = Right
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = Home
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = Forward
+repeat = 3
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = Rewind
+repeat = 3
+config = SpeedSlower
+end
+
+begin
+prog = xine
+button = VolUp
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = VolDown
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = Mute
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = ChanUp
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = ChanDown
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = More
+repeat = 3
+config = OSDStreamInfos
+end
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg
new file mode 100644
index 0000000..0aa6a4a
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg
new file mode 100644
index 0000000..1d887dd
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell
new file mode 100644
index 0000000..b63ab25
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell
@@ -0,0 +1,94 @@
+# Config file for Packard Bell Remotes (with repeat codes!)
+# created by Samuel Wood (sjw@umr.edu)
+#
+# brand: Packard Bell Remote
+# model: El Cheapo Packard Bell Remote
+#
+# This is a config file for the cheap excess Packard Bell remotes
+# you sometimes can buy from online auctions like www.onsale.com.
+#
+# The receiver that comes with it hooks into the serial port and works
+# fine with lirc 0.5.4.
+#
+# The receiver that comes with the remote is near garbage. If
+# you don't point almost directly at it, it will not detect. But
+# it's simpler than building your own. :-)
+#
+# Repeat works fine for me. You just have to modify or add the
+# "repeat=" lines in your .lircrc.
+#
+# irrecord was used to generate the file, then I modified and
+# added repeat codes.
+#
+# The button names used are identical to what was printed on the
+# remote, except for the number pads (using actual numbers like
+# "1" and so forth did not seem to work. Similarly, '*' is Star
+# and '#' is Hash. LMB and RMB refer to the two mousepad buttons
+# on the left and right respectively.
+#
+# I still need to modify the gap setting. Right now, if you don't
+# hold the button down long enough, it may not register, but if
+# you hold it too long, it will detect a repeat or two. Feel free
+# to modify this to work better. If you get it to work better, send
+# me a copy. :-)
+
+begin remote
+
+ name PackBell
+ bits 15
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9065 4500
+ one 597 532
+ zero 597 1643
+ ptrail 597
+ pre_data_bits 16
+ pre_data 0xF708
+ post_data_bits 1
+ post_data 0x0
+ gap 107000
+ repeat_bit 0
+ repeat 9050 2250
+
+ begin codes
+ Help 0x0000000000006F90
+ Phone 0x0000000000004FB0
+ Message 0x0000000000006E91
+ SRS 0x0000000000004EB1
+ CD 0x0000000000002FD0
+ Aux1 0x0000000000000FF0
+ Aux2 0x0000000000002ED1
+ Aux3 0x0000000000000EF1
+ LMB 0x00000000000023DC
+ RMB 0x000000000000639C
+ Up 0x00000000000037C8
+ Down 0x00000000000057A8
+ Left 0x0000000000007788
+ Right 0x00000000000017E8
+ Menu 0x0000000000007B84
+ Mute 0x0000000000003BC4
+ Enter 0x00000000000047B8
+ CHUp 0x00000000000027D8
+ CHDown 0x0000000000006798
+ VolUp 0x0000000000005BA4
+ VolDown 0x0000000000001BE4
+ Display 0x00000000000007F8
+ One 0x0000000000005EA1
+ Two 0x0000000000001EE1
+ Three 0x0000000000000BF4
+ Four 0x0000000000007E81
+ Five 0x0000000000003EC1
+ Six 0x0000000000004BB4
+ Seven 0x0000000000005FA0
+ Eight 0x0000000000001FE0
+ Nine 0x0000000000002BD4
+ Zero 0x0000000000003FC0
+ Star 0x0000000000007F80
+ Hash 0x0000000000006B94
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak
new file mode 100644
index 0000000..0a11e58
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak
@@ -0,0 +1,116 @@
+#
+#
+# contributed by P_awe_L pablozrudnika@wp.pl
+#
+# brand: PC MAK/MINIMAK LASER/MINIMAK
+# model: Value Infrared Remote Control
+# supported devices: PC MAK receiver
+#
+
+begin remote
+
+ name PC_MAK
+ bits 8
+ flags SPACE_ENC|CONST_LENGTH
+ eps 15
+ aeps 100
+
+ one 0 833
+ zero 833 0
+ pre_data_bits 8
+ pre_data 0xAA
+ gap 100000
+ repeat_bit 0
+
+ begin codes
+ HOME 0x0000000000000001
+ ARROW_UP 0x0000000000000002
+ PG_UP 0x0000000000000003
+ ARROW_LEFT 0x0000000000000004
+ ENTER 0x0000000000000005
+ ARROW_RIGHT 0x0000000000000006
+ END 0x0000000000000007
+ ARROW_DOWN 0x0000000000000008
+ PG_DN 0x0000000000000009
+ SPACE 0x000000000000000A
+ TAB 0x000000000000000B
+ ESC 0x000000000000000C
+ ALT 0x000000000000000D
+ PLAYLIST 0x000000000000000E
+ LOAD 0x000000000000000F
+ MOUSE_N 0x0000000000000010
+ MOUSE_NE 0x0000000000000011
+ MOUSE_E 0x0000000000000012
+ MOUSE_SE 0x0000000000000013
+ MOUSE_S 0x0000000000000014
+ MOUSE_SW 0x0000000000000015
+ MOUSE_W 0x0000000000000016
+ MOUSE_NW 0x0000000000000017
+ FULLSCREEN 0x0000000000000018
+ BUTTONL_DOWN 0x0000000000000019
+ BUTTONR_DOWN 0x000000000000001A
+ POWER 0x000000000000001B
+ A 0x000000000000001C
+ B 0x000000000000001D
+ C 0x000000000000001E
+ D 0x000000000000001F
+ VOL_DOWN 0x0000000000000020
+ MUTE 0x0000000000000021
+ VOL_UP 0x0000000000000022
+ PLAY 0x0000000000000024
+ PREV 0x0000000000000026
+ PAUSE 0x0000000000000027
+ NEXT 0x0000000000000028
+ SKIP_BACK 0x0000000000000029
+ STOP 0x000000000000002A
+ SKIP_FORW 0x000000000000002B
+ 1 0x0000000000000041
+ 2 0x0000000000000042
+ 3 0x0000000000000043
+ 4 0x0000000000000044
+ 5 0x0000000000000045
+ 6 0x0000000000000046
+ 7 0x0000000000000047
+ 8 0x0000000000000048
+ 9 0x0000000000000049
+ 0 0x000000000000004A
+ sTAB 0x000000000000004B
+ sESC 0x000000000000004C
+ sALT 0x000000000000004D
+ sPLAYLIST 0x000000000000004E
+ TXT 0x000000000000004F
+ sMOUSE_N 0x0000000000000050
+ sMOUSE_NE 0x0000000000000051
+ sMOUSE_E 0x0000000000000052
+ sMOUSE_SE 0x0000000000000053
+ sMOUSE_S 0x0000000000000054
+ sMOUSE_SW 0x0000000000000055
+ sMOUSE_W 0x0000000000000056
+ sMOUSE_NW 0x0000000000000057
+ sOK 0x0000000000000058
+ BUTTONL_UP 0x0000000000000059
+ BUTTONR_UP 0x000000000000005A
+ EXIT 0x000000000000005B
+ E 0x000000000000005C
+ F 0x000000000000005D
+ G 0x000000000000005E
+ H 0x000000000000005F
+ sVOL_DOWN 0x0000000000000060
+ sMUTE 0x0000000000000061
+ sVOL_UP 0x0000000000000062
+ sPLAY 0x0000000000000064
+ sPREV 0x0000000000000066
+ sPAUSE 0x0000000000000067
+ sNEXT 0x0000000000000068
+ ZOOM- 0x0000000000000069
+ HELP 0x000000000000006A
+ ZOOM+ 0x000000000000006B
+ MM_PLAY 0x000000000000002F
+ MM_PREV 0x0000000000000030
+ MM_NEXT 0x0000000000000031
+ MM_PAUSE 0x000000000000005F
+ MM_BACK 0x0000000000000075
+ MM_FORW 0x0000000000000079
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak
new file mode 100644
index 0000000..d7c8dcf
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak
@@ -0,0 +1,29 @@
+#
+# lircmd config file for the PC_MAK control
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 1 25 2
+
+#ACTIVATE * MENU
+
+MOVE_N PC_MAK MOUSE_N
+MOVE_NE PC_MAK MOUSE_NE
+
+MOVE_E PC_MAK MOUSE_E
+MOVE_SE PC_MAK MOUSE_SE
+
+MOVE_S PC_MAK MOUSE_S
+MOVE_SW PC_MAK MOUSE_SW
+
+MOVE_W PC_MAK MOUSE_W
+MOVE_NW PC_MAK MOUSE_NW
+
+BUTTON1_CLICK PC_MAK BUTTONL_DOWN
+BUTTON3_CLICK PC_MAK BUTTONR_DOWN
+
+BUTTON1_TOGGLE PC_MAK BUTTONL_UP
+BUTTON3_TOGGLE PC_MAK BUTTONR_UP
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak
new file mode 100644
index 0000000..414e38a
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak
@@ -0,0 +1,1310 @@
+#####################################################################
+# contributed by P_awe_L pablozrudnika@wp.pl
+#####################################################################
+#
+# XMMS
+#
+#####################################################################
+begin xmms
+ begin
+ prog = irxevent
+ button = LOAD
+ config = Key shift-L xmms
+ end
+ begin
+ prog = xmms
+ button = play
+ config = PLAY
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = PLAYLIST
+ config = Key alt-e XMMS
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = FULLSCREEN
+ config = Key ctrl-d XMMS
+ end
+ begin
+ prog = xmms
+ button = TXT
+ config = PLAYLIST_CLEAR
+ end
+ begin
+ prog = xmms
+ button = load
+ config = PLAYLIST_ADD .xmms/xmms.m3u
+ end
+ begin
+ prog = xmms
+ button = pause
+ config = PAUSE
+ end
+ begin
+ prog = xmms
+ button = stop
+ config = STOP
+ end
+ begin
+ prog = xmms
+ button = EXIT
+ config = QUIT
+ end
+ begin
+ prog = xmms
+ button = NEXT
+ config = NEXT
+ end
+ begin
+ prog = xmms
+ button = PREV
+ config = PREV
+ end
+ begin
+ prog = xmms
+ button = SKIP_FORW
+ repeat = 2
+ config = FWD 3
+ end
+ begin
+ prog = xmms
+ button = SKIP_BACK
+ repeat = 2
+ config = BWD 3
+ end
+ begin
+ prog = xmms
+ button = VOL_UP
+ repeat = 2
+ config = VOL_UP 5
+ end
+ begin
+ prog = xmms
+ remote = *
+ button = H
+ repeat = 2
+ config = VOL_DOWN 5
+ end
+end xmms
+#####################################################################
+#
+# MPlayer
+#
+#####################################################################
+begin mplayer
+ begin
+ prog = mplayer
+ remote = *
+ button = PLAYLIST
+ config = gui_playlist
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = LOAD
+ config = gui_loadfile
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = TXT
+ config = gui_loadsubtitle
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = FULLSCREEN
+ config = vo_fullscreen
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = MUTE
+ config = mute
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = SKIP_FORW
+ repeat = 1
+ config = seek +10
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = VOL_DOWN
+ repeat = 1
+ config = volume -1
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = VOL_UP
+ repeat = 1
+ config = volume 1
+ end
+ begin
+ prog = mplayer
+ remote = *
+ button = SKIP_BACK
+ repeat = 1
+ config = seek -10
+ end
+ begin
+ prog = mplayer
+ button = play
+ config = pause
+ end
+ begin
+ prog = mplayer
+ button = pause
+ config = pause
+ end
+ begin
+ prog = mplayer
+ button = stop
+ config = seek 0 1\npause
+ end
+ begin
+ prog = mplayer
+ button = NEXT
+ config = pt_step 1
+ end
+ begin
+ prog = mplayer
+ button = PREV
+ config = pt_step -1
+ end
+ begin
+ prog = mplayer
+ button = EXIT
+ config = quit
+ end
+end mplayer
+#####################################################################
+#
+# GQview
+#
+#####################################################################
+begin gqview
+ begin
+ prog = irxevent
+ remote = *
+ button = EXIT
+ config = Key ctrl-q GQview
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = FULLSCREEN
+ config = Key v GQview
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = PREV
+ repeat = 5
+ config = Key Prior GQview
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = SKIP_BACK
+ config = Key Home GQview
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = SKIP_FORW
+ config = Key End GQview
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = NEXT
+ repeat = 5
+ config = Key Next GQview
+ end
+ begin
+ prog = irxevent
+ button = ZOOM-
+ repeat = 5
+ config = Key minus GQview
+ end
+ begin
+ prog = irxevent
+ button = ZOOM+
+ repeat = 5
+ config = Key plus GQview
+ end
+ begin
+ prog = irxevent
+ button = C
+ config = Key s GQview
+ end
+ begin
+ prog = irxevent
+ button = LOAD
+ config = Key o GQview
+ end
+end gqview
+#####################################################################
+#
+# Sterowanie Xwindow Linuxa
+#
+#####################################################################
+begin linux
+ begin
+ prog = irexec
+ button = PAUSE
+ config = xscreensaver-command -activate
+ end
+ begin
+ prog = irxevent
+ button = sNEXT
+ config = Key alt-Escape RootWindow
+ end
+ begin
+ prog = irxevent
+ button = sPREV
+ config = Key alt-shift-Escape RootWindow
+ end
+ begin
+ prog = irexec
+ button = STOP
+ config = xset dpms force off
+ end
+ begin
+ prog = irexec
+ button = PLAY
+ config = xset dpms force on
+ end
+ begin
+ prog = irexec
+ button = EXIT
+ config = poweroff
+ end
+end linux
+#####################################################################
+#
+# Xine
+#
+#####################################################################
+# Reduce the output window size.
+begin xine
+ begin
+ prog = xine
+ button = xxxxx
+ config = WindowReduce
+ end
+ # Enlarge the output window size.
+ begin
+ prog = xine
+ button = xxxxx
+ config = WindowEnlarge
+ end
+ # Select next sub picture (subtitle) channel.
+ begin
+ prog = xine
+ button = NEXT
+ config = SpuNext
+ end
+ # Select previous sub picture (subtitle) channel.
+ begin
+ prog = xine
+ button = PREV
+ config = SpuPrior
+ end
+ # Visibility toggle of control window.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ControlShow
+ end
+ # Visibility toggle of output window visibility.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ToggleWindowVisibility
+ end
+ # Select next audio channel.
+ begin
+ prog = xine
+ button = xxxxx
+ config = AudioChannelNext
+ end
+ # Select previous audio channel.
+ begin
+ prog = xine
+ button = xxxxx
+ config = AudioChannelPrior
+ end
+ # Visibility toggle of playlist editor window.
+ begin
+ prog = xine
+ button = PLAYLIST
+ config = PlaylistEditor
+ end
+ # Playback pause toggle.
+ begin
+ prog = xine
+ button = PAUSE
+ config = Pause
+ end
+ # Visibility toggle of UI windows.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ToggleVisiblity
+ end
+ # Fullscreen toggle.
+ begin
+ prog = xine
+ button = FULLSCREEN
+ config = ToggleFullscreen
+ end
+ # Aspect ratio values toggle.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ToggleAspectRatio
+ end
+ # Interlaced mode toggle.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ToggleInterleave
+ end
+ # Quit the program.
+ begin
+ prog = irxevent
+ button = EXIT
+ config = Key q xine
+ end
+ # Start playback.
+ begin
+ prog = xine
+ button = PLAY
+ config = Play
+ end
+ # Visibility toggle of the setup window.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetupShow
+ end
+ # Stop playback.
+ begin
+ prog = xine
+ button = STOP
+ config = Stop
+ end
+ # Select and play next mrl in the playlist.
+ begin
+ prog = xine
+ button = xxxxx
+ config = NextMrl
+ end
+ # Select and play previous mrl in the playlist.
+ begin
+ prog = xine
+ button = xxxxx
+ config = PriorMrl
+ end
+ # Eject the current medium.
+ begin
+ prog = xine
+ button = xxxxx
+ config = Eject
+ end
+ # Set position to beginning of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition0%
+ end
+ # Set position to 10% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition10%
+ end
+ # Set position to 20% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition20%
+ end
+ # Set position to 30% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition30%
+ end
+ # Set position to 40% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition40%
+ end
+ # Set position to 50% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition50%
+ end
+ # Set position to 60% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition60%
+ end
+ # Set position to 70% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition70%
+ end
+ # Set position to 80% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition80%
+ end
+ # Set position to 90% of current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SetPosition90%
+ end
+ # Set position to -60 seconds in current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SeekRelative-60
+ end
+ # Set position to +60 seconds in current stream.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SeekRelative+60
+ end
+ # Set position to -15 seconds in current stream.
+ begin
+ prog = xine
+ button = SKIP_BACK
+ config = SeekRelative-15
+ end
+ # Set position to +15 seconds in current stream.
+ begin
+ prog = xine
+ button = SKIP_FORW
+ config = SeekRelative+15
+ end
+ # Visibility toggle of mrl browser window.
+ begin
+ prog = xine
+ button = xxxxx
+ config = MrlBrowser
+ end
+ # Audio muting toggle.
+ begin
+ prog = xine
+ button = MUTE
+ config = Mute
+ end
+ # Change audio syncing.
+ begin
+ prog = xine
+ button = xxxxx
+ config = AudioVideoDecay+
+ end
+ # Change audio syncing.
+ begin
+ prog = xine
+ button = xxxxx
+ config = AudioVideoDecay-
+ end
+ # Reset audio video syncing offset.
+ begin
+ prog = xine
+ button = xxxxx
+ config = AudioVideoDecayReset
+ end
+ # Increment playback speed.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SpeedFaster
+ end
+ # Decrement playback speed.
+ begin
+ prog = xine
+ button = xxxxx
+ config = SpeedSlower
+ end
+ # Increment audio volume.
+ begin
+ prog = xine
+ button = VOL_UP
+ config = Volume+
+ end
+ # Decrement audio volume.
+ begin
+ prog = xine
+ button = VOL_DOWN
+ config = Volume-
+ end
+ # Take a snapshot (Internal image fetch and save).
+ begin
+ prog = xine
+ button = xxxxx
+ config = Snapshot
+ end
+ # Resize output window to stream size1:1.
+ begin
+ prog = xine
+ button = xxxxx
+ config = Zoom1:1
+ end
+ # Grab pointer toggle.
+ begin
+ prog = xine
+ button = xxxxx
+ config = GrabPointer
+ end
+ # Menu 1 event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventMenu1
+ end
+ # Menu 2 event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventMenu2
+ end
+ # Menu 3 event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventMenu3
+ end
+ # Up event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventUp
+ end
+ # Down event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventDown
+ end
+ # Left event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventLeft
+ end
+ # Right event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventRight
+ end
+ # Previous event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventPrior
+ end
+ # Next event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventNext
+ end
+ # Previous angle event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventAnglePrior
+ end
+ # Next angle event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventAngleNext
+ end
+ # Select event.
+ begin
+ prog = xine
+ button = xxxxx
+ config = EventSelect
+ end
+ # Zoom into video.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomIn
+ end
+ # Zoom out of video.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomOut
+ end
+ # Zoom into video horizontally, distorting aspect ratio.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomInX
+ end
+ # Zoom out of video horizontally, distorting aspect ratio.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomOutX
+ end
+ # Zoom into video vertically, distorting aspect ratio.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomInY
+ end
+ # Zoom out of video vertically, distorting aspect ratio.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomOutY
+ end
+ # Reset zooming.
+ begin
+ prog = xine
+ button = xxxxx
+ config = ZoomReset
+ end
+ # Toggle TV modes on the DXR3
+ begin
+ prog = xine
+ button = xxxxx
+ config = ToggleTVmode
+ end
+ # Visibility toggle of log viewer
+ begin
+ prog = xine
+ button = xxxxx
+ config = ViewlogShow
+ end
+end xine
+#####################################################################
+#
+# XAWTV
+#
+#####################################################################
+begin xawtv
+ begin
+ prog = xawtv
+ remote = *
+ button = NEXT
+ config = setstation next
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = PREV
+ config = setstation prev
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = VOL_UP
+ config = volume inc
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = VOL_DOWN
+ config = volume dec
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = MUTE
+ config = volume mute
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = FULLSCREEN
+ config = fullscreen toggle
+ flags = once
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = PLAYLIST
+ config = setinput next
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = EXIT
+ config = quit
+ flags = once
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ARROW_UP
+ config = keypad 1
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ARROW_UP
+ config = keypad 2
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = PG_UP
+ config = keypad 3
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ARROW_LEFT
+ config = keypad 4
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ENTER
+ config = keypad 5
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ARROW_RIGHT
+ config = keypad 6
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = END
+ config = keypad 7
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = ARROW_DOWN
+ config = keypad 8
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = PG_DN
+ config = keypad 9
+ end
+ begin
+ prog = xawtv
+ remote = *
+ button = SPACE
+ config = keypad 0
+ end
+end xawtv
+#####################################################################
+#
+# Xpdf
+#
+#####################################################################
+begin xpdf
+ begin
+ prog = irxevent
+ remote = *
+ button = LOAD
+ config = Key o xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = PREV
+ config = Key p xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = NEXT
+ config = Key n xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = SKIP_BACK
+ config = Key BackSpace xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = SKIP_FORW
+ config = Key space xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = ZOOM-
+ config = Key minus xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = ZOOM+
+ config = Key KP_Add xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = sPREV
+ config = Key z xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = sNEXT
+ config = Key w xpdf
+ end
+ begin
+ prog = irxevent
+ remote = *
+ button = EXIT
+ config = Key q xpdf
+ end
+end xpdf
+#####################################################################
+#
+# FREEVO
+# In freevo_config.py variable LIRCRC have to show this file
+# eg. LIRCRC = '/home/john/.lircrc'
+#####################################################################
+begin freevo
+ begin
+ prog = irexec
+ remote = *
+ button = POWER
+ config = freevo stop
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PLAYLIST
+ config = DISPLAY
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = sPLAYLIST
+ config = SUBTITLE
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = BUTTONR_DOWN
+ config = EXIT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = MOUSE_N
+ config = UP
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = MOUSE_S
+ config = DOWN
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = MOUSE_W
+ config = LEFT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = MOUSE_E
+ config = RIGHT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = BUTTONL_DOWN
+ config = SELECT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = FULLSCREEN
+ config = SELECT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = MUTE
+ config = MUTE
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = VOL_UP
+ config = VOL+
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = VOL_DOWN
+ config = VOL-
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = NEXT
+ config = CH+
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PREV
+ config = CH-
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = sPREV
+ config = PREV_CH
+ end
+ begin
+ prog = freevo
+ button = sNEXT
+ config = NEXT_CH
+ end
+ begin
+ prog = freevo
+ button = SKIP_BACK
+ config = REW
+ end
+ begin
+ prog = freevo
+ button = SKIP_FORW
+ config = FFWD
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PLAY
+ config = PLAY
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PAUSE
+ config = PAUSE
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = STOP
+ config = STOP
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = sPLAY
+ config = REC
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = HELP
+ repeat = 10
+ config = EJECT
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = HOME
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ARROW_UP
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PG_UP
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ARROW_LEFT
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ENTER
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ARROW_RIGHT
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = END
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ARROW_DOWN
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = PG_DN
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = SPACE
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = TAB
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ESC
+ config =
+ end
+ begin
+ prog = freevo
+ remote = *
+ button = ALT
+ config =
+ end
+end freevo
+#####################################################################
+#
+# Wybor aplikacji
+#
+#####################################################################
+begin
+ prog = irexec
+ button = A
+ config = xmms&
+ mode = xmms
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ button = B
+ config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi
+ mode = mplayer
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ button = C
+ config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi
+ mode = gqview
+end
+begin
+ prog = none
+ button = D
+ mode = linux
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ remote = *
+ button = E
+ config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi
+ mode = xine
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ button = F
+ config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi
+ mode = xawtv
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ button = G
+ config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi
+ mode = xpdf
+end
+#tag:Uruchom program tylko raz!!
+begin
+ prog = irexec
+ remote = *
+ button = H
+ config = freevo&
+ mode = freevo
+end
+#####################################################################
+#
+# Klawisze Globalne
+#
+#####################################################################
+begin
+ prog = irxevent
+ button = HOME
+ config = Key Home CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ARROW_UP
+ repeat = 5
+ config = Key Up CurrentWindow
+end
+begin
+ prog = irxevent
+ button = PG_UP
+ repeat = 5
+ config = Key Page_Up CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ARROW_LEFT
+ repeat = 5
+ config = Key Left CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ENTER
+ config = Key Return CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ARROW_RIGHT
+ repeat = 5
+ config = Key Right CurrentWindow
+end
+begin
+ prog = irxevent
+ button = END
+ config = Key End CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ARROW_DOWN
+ repeat = 5
+ config = Key Down CurrentWindow
+end
+begin
+ prog = irxevent
+ button = PG_DN
+ repeat = 5
+ config = Key Page_Down CurrentWindow
+end
+begin
+ prog = irxevent
+ button = TAB
+ config = Key Tab CurrentWindow
+end
+begin
+ prog = irxevent
+ remote = *
+ button = sTAB
+ config = Key shift-Tab CurrentWindow
+end
+begin
+ prog = irxevent
+ button = SPACE
+ config = Key space CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ESC
+ config = Key Escape CurrentWindow
+end
+begin
+ prog = irxevent
+ button = ALT
+ config = Key UP CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 1
+ config = Key 1 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 2
+ config = Key 2 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 3
+ config = Key 3 CurrentWindow
+end
+begin
+ prog = irxevent
+ remote = *
+ button = 4
+ config = Key 4 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 5
+ config = Key 5 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 6
+ config = Key 6 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 7
+ config = Key 7 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 8
+ config = Key 8 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 9
+ config = Key 9 CurrentWindow
+end
+begin
+ prog = irxevent
+ button = 0
+ config = Key 0 CurrentWindow
+end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg
new file mode 100644
index 0000000..d2ccdd1
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv
new file mode 100644
index 0000000..4783e06
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv
@@ -0,0 +1,94 @@
+#
+# contributed by Bart Alewijnse <scarfboy@yahoo.com>
+#
+# brand: Pinnacle Systems
+# model: PCTV Remote (Perhaps other ones as well)
+# supported devices: there's only one I know of. (serial)
+#
+# Mail me if your remote is only partly supported, or if it has different
+# buttons than listed below.
+#
+
+begin remote
+
+ name PinnacleSysPCTVRemote
+ bits 8
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ gap 180000
+
+ begin codes
+ Mute 0x000000000000003C
+ Power 0x000000000000002F
+ Chan+Play 0x000000000000003F
+ Chan-Stop 0x000000000000003E
+ Vol+FF 0x000000000000003B
+ Vol-Rew 0x000000000000003D
+ 1 0x0000000000000031
+ 2 0x0000000000000032
+ 3 0x0000000000000033
+ 4 0x0000000000000034
+ 5 0x0000000000000035
+ 6 0x0000000000000036
+ 7 0x0000000000000037
+ 8 0x0000000000000038
+ 9 0x0000000000000039
+ Fullscreen 0x000000000000002D
+ 0/AV 0x000000000000003A
+ Info 0x000000000000002B
+ Preview 0x000000000000002E
+ Record 0x0000000000000027
+ Chan_Last 0x0000000000000025
+ F_TV 0x0000000000000026
+ F_TELETEXT 0x0000000000000029
+ F_RADIO 0x000000000000002A
+
+#
+# here are some extra buttons a new version of the remote seems to have
+#
+# contributed by Robbert Monna <rjmonna@kabelfoon.nl>
+#
+# brand: Pinnacle Systems
+# model: PCTV Remote (newest version?)
+# supported devices: dongle on serial port (from TV-Card)
+#
+ L 0x000000000000001F
+ Zoom 0x000000000000001E
+ vol+ 0x000000000000001B
+ vol- 0x000000000000000F
+ channel+ 0x0000000000000017
+ channel- 0x000000000000001C
+ middle 0x000000000000001A
+ Menu 0x000000000000001D
+ next 0x0000000000000019
+ undo 0x0000000000000016
+ pause 0x0000000000000015
+ redo 0x0000000000000013
+ Rewind 0x000000000000000E
+ Play 0x000000000000000D
+ Stop 0x000000000000000B
+ FForward 0x0000000000000007
+ EPG 0x0000000000000018
+
+# here are some more buttons that seem to be mapped differently from
+# the ones above
+
+# contributed by InterCeptor ceptor_7@freemail.hu
+#
+# brand: Pinnacle Systems PCTV Pro Remote
+# model no. of remote control: (I can't find any numbers on it)
+# supported devices: serial
+#
+
+ 9 0x0000000000000082
+ Zoom 0x00000000000000B2
+ middle 0x0000000000000014
+
+
+ end codes
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv
new file mode 100644
index 0000000..064ee57
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv
@@ -0,0 +1,34 @@
+#
+# contributed by Nathan Hand <nathanh@chirp.com.au>
+#
+# brand: Pixelview
+# model:
+# supported devices: Pixelview PlayTV PRO
+#
+
+begin remote
+ name Pixelview
+ bits 8
+
+ begin codes
+ TV/FM 0x00000000000000e7
+ FULL_SCREEN 0x00000000000000bf
+ CH+ 0x0000000000000049
+ CH- 0x00000000000000c1
+ VOL- 0x000000000000006a
+ VOL+ 0x000000000000004a
+ MUTE 0x0000000000000047
+ SOURCE 0x00000000000000e1
+ 1 0x00000000000000e0
+ 2 0x00000000000000c8
+ 3 0x00000000000000e8
+ 4 0x0000000000000060
+ 5 0x0000000000000062
+ 6 0x00000000000000c9
+ 7 0x00000000000000c0
+ 8 0x00000000000000c2
+ 9 0x0000000000000061
+ 0 0x0000000000000040
+ end codes
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878
new file mode 100644
index 0000000..f017a3b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878
@@ -0,0 +1,54 @@
+#
+# contributed by Michal Kochanowicz <mkochano@pld.org.pl>
+# based on file contributred by Nathan Hand <nathanh@chirp.com.au>
+#
+# brand: PixelView
+# model: BT878+W/FM
+# supported devices: PixelView BT878+W/FM
+#
+
+begin remote
+ name PixelView
+ bits 8
+# repeat_bit 2
+ repeat 9080 2189
+ gap 108056
+ repeat_bit 0
+
+ begin codes
+ POWER 0x00000000000000aa
+ TV/FM 0x00000000000000e7
+ TELETEXT 0x000000000000003f
+ SCAN 0x0000000000000041
+ +/- 0x0000000000000069
+ EJECT 0x000000000000002a
+ STOP 0x000000000000008a
+ SOURCE 0x00000000000000e1
+ STEREO 0x00000000000000df
+ ENTER 0x000000000000005f
+ SEEK_NEXT 0x0000000000000067
+ SEEK_FWD 0x00000000000000c7
+ CH_UP 0x0000000000000049
+ VOL_UP 0x000000000000004a
+ RECALL 0x0000000000000048
+ PAUSE 0x0000000000000068
+ PLAY 0x00000000000000ca
+ CH_DOWN 0x00000000000000c1
+ VOL_DOWN 0x000000000000006a
+ SEEK_PREV 0x000000000000000a
+ SEEK_BACK 0x0000000000000042
+ ZOOM 0x00000000000000bf
+ MUTE 0x0000000000000047
+ 1 0x00000000000000e0
+ 2 0x00000000000000c8
+ 3 0x00000000000000e8
+ 4 0x0000000000000060
+ 5 0x0000000000000062
+ 6 0x00000000000000c9
+ 7 0x00000000000000c0
+ 8 0x00000000000000c2
+ 9 0x0000000000000061
+ 0 0x0000000000000040
+ end codes
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro
new file mode 100644
index 0000000..84e84a9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro
@@ -0,0 +1,159 @@
+#
+# brand: PixelView
+# model: PlayTV Pro remote control
+#
+# supported devices:
+# works both with home-brew and TV card receiver (use lirc-0.6.6 or better)
+#
+
+
+begin remote
+
+ name pixelviewp
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 20
+ aeps 200
+
+ pre_data_bits 16
+ pre_data 0x61d6
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ repeat 9000 2250
+ gap 108000
+ toggle_bit 0
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+
+ power 0x0000000000007887
+ zoom 0x00000000000038C7
+ scan 0x000000000000E01F
+ tv/fm 0x000000000000C03F
+ vol+ 0x000000000000F807
+ vol- 0x000000000000E817
+ chan+ 0x0000000000006897
+ chan- 0x00000000000028D7
+ mute 0x00000000000018E7
+ source 0x00000000000000FF
+ loop 0x000000000000C837
+ +100 0x00000000000008F7
+ fn- 0x00000000000020DF
+ fn+ 0x00000000000030CF
+ reset 0x000000000000B04F
+ freeze 0x000000000000F00F
+ function 0x000000000000708F
+ 0 0x00000000000040BF
+ 1 0x000000000000807F
+ 2 0x000000000000D02F
+ 3 0x000000000000D827
+ 4 0x000000000000A05F
+ 5 0x000000000000906F
+ 6 0x000000000000A857
+ 7 0x000000000000609F
+ 8 0x00000000000050AF
+ 9 0x00000000000048B7
+
+ end codes
+
+end remote
+
+
+# This config file was automatically generated
+# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005
+#
+# contributed by Thadeu A. Coelho de Paula
+# thadeudepaula (at) gmail (dot) com
+# http://mundolivre.hostrix.com.br
+#
+# brand: PixelView
+# model: PlayTV MPEG2 (M4900)
+#
+# supported devices:
+# This TV Card
+
+
+begin remote
+
+ name PixelView_PlayTV_MPEG2
+ bits 16
+ eps 30
+ aeps 100
+
+ pre_data_bits 16
+ pre_data 0x61D6
+
+ header 9000 4500
+ one 563 1687
+ zero 563 562
+ ptrail 563
+ repeat 9000 2250
+ gap 108000
+ toggle_bit 0
+
+ frequency 38000
+ duty_cycle 33
+
+
+
+ begin codes
+ timeshift 0xC03F
+ power 0x7887
+ 1 0x807F
+ 2 0xD02F
+ 3 0xD827
+ 4 0xA05F
+ 5 0x906F
+ 6 0xA857
+ 7 0x609F
+ 8 0x50AF
+ 9 0x48B7
+ 0 0x40BF
+ loop 0xC837
+ +100 0x08F7
+ source 0x00FF
+ mute 0x18E7
+ ch+ 0x6897
+ ch- 0x28D7
+ vol+ 0xF807
+ vol- 0xE817
+ zoom 0x38C7
+ snapshot 0x9867
+ scan 0x58A7
+ bw 0x20DF
+ rec 0x708F
+ fw 0x30CF
+ stop 0xB847
+ play 0x10EF
+ pause 0xF00F
+ tv 0xB04F
+ fm 0xE01F
+ end codes
+
+end remote
+
+# CONTROL LAYOUT:
+#
+# TIMESHIFT POWER
+#
+# 1 2 3
+# 4 5 6
+# 7 8 9
+# LOOP 0 SCAN
+# SOURCE MUTE
+#
+# CH+
+# VOL- ZOOM VOL+
+# CH-
+#
+# SNAPSHOT SCAN
+#
+# BW REC FW
+# STOP PLAY PAUSE
+#
+# TV FM
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster
new file mode 100644
index 0000000..1b75e42
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster
@@ -0,0 +1,117 @@
+# this config file was MANUALLY generated
+# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000
+#
+# contributed by Petre Rodan <rodan@subdimension.com>
+#
+# brand: PixelView
+# model: RemoteMaster 2000
+# supported devices: ComboTV series
+# receiver type: /dev/ttySx
+# video card: PixelView bttv848 pll=1 type=5
+#
+
+begin remote
+
+ name RemoteMaster_2000_12b
+ bits 20
+ flags SPACE_ENC
+ eps 30
+ aeps 100
+
+ one 0 833
+ zero 833 0
+ pre_data_bits 10
+ pre_data 0x12B
+ gap 189264
+
+ begin codes
+ 1 0x0000000000052D2F
+ 2 0x0000000000052CCF
+ 3 0x0000000000052CAF
+ 4 0x0000000000052D37
+ 5 0x0000000000052CDF
+ 6 0x000000000005359F
+ 7 0x0000000000052D4F
+ 8 0x0000000000052D3F
+ 9 0x00000000000534DF
+ 0 0x0000000000052D57
+ ENTER 0x0000000000052CD7
+ +10 0x0000000000053537
+ POWER 0x0000000000054D5F
+ MODE 0x00000000000534AF
+ TAB 0x0000000000053557
+ ZOOM 0x000000000005355F
+ FREEZE 0x000000000005356F
+ SEEK-- 0x0000000000054DAF
+ PAUSE 0x0000000000052CB7
+ SEEK++ 0x00000000000534B7
+ SEEK- 0x0000000000052D5F
+ PLAY 0x0000000000052D9F
+ SEEK+ 0x00000000000534CF
+ STOP 0x0000000000054D9F
+ EJECT 0x0000000000054D6F
+ F1 0x000000000005354F
+ F2 0x00000000000534D7
+ F3 0x00000000000534BF
+ F4 0x000000000005352F
+ CH- 0x000000000005353F
+ CH+ 0x00000000000535AF
+ VOL- 0x0000000000052D6F
+ VOL+ 0x0000000000052DAF
+ end codes
+
+end remote
+
+begin remote
+
+ name RemoteMaster_2000_14b
+ bits 20
+ flags SPACE_ENC
+ eps 30
+ aeps 100
+
+ one 0 833
+ zero 833 0
+ pre_data_bits 10
+ pre_data 0x14B
+ gap 189264
+
+ begin codes
+ 1 0x0000000000052D2F
+ 2 0x0000000000052CCF
+ 3 0x0000000000052CAF
+ 4 0x0000000000052D37
+ 5 0x0000000000052CDF
+ 6 0x000000000005359F
+ 7 0x0000000000052D4F
+ 8 0x0000000000052D3F
+ 9 0x00000000000534DF
+ 0 0x0000000000052D57
+ ENTER 0x0000000000052CD7
+ +10 0x0000000000053537
+ POWER 0x0000000000054D5F
+ MODE 0x00000000000534AF
+ TAB 0x0000000000053557
+ ZOOM 0x000000000005355F
+ FREEZE 0x000000000005356F
+ SEEK-- 0x0000000000054DAF
+ PAUSE 0x0000000000052CB7
+ SEEK++ 0x00000000000534B7
+ SEEK- 0x0000000000052D5F
+ PLAY 0x0000000000052D9F
+ SEEK+ 0x00000000000534CF
+ STOP 0x0000000000054D9F
+ EJECT 0x0000000000054D6F
+ F1 0x000000000005354F
+ F2 0x00000000000534D7
+ F3 0x00000000000534BF
+ F4 0x000000000005352F
+ CH- 0x000000000005353F
+ CH+ 0x00000000000535AF
+ VOL- 0x0000000000052D6F
+ VOL+ 0x0000000000052DAF
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro
new file mode 100644
index 0000000..e277fe6
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro
@@ -0,0 +1,29 @@
+# lircmd.conf file to be used with PixeView PlayTV pro
+#
+# lircmd config file
+#
+
+#PROTOCOL IntelliMouse
+
+ACCELERATOR 2 20 5
+
+ACTIVATE * +100
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_S * 8
+
+BUTTON1_TOGGLE * tv/fm
+BUTTON2_TOGGLE * scan
+BUTTON3_TOGGLE * zoom
+
+BUTTON1_CLICK * 0
+BUTTON2_CLICK * loop
+BUTTON3_CLICK * source
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster
new file mode 100644
index 0000000..07d2547
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster
@@ -0,0 +1,31 @@
+# lircmd.conf file to be used with RemoteMaster 2000
+#
+# lircmd config file
+#
+
+# ACCELERATOR start max multiplier
+
+#PROTOCOL IntelliMouse
+
+ACCELERATOR 2 20 5
+
+ACTIVATE * ENTER
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+MOVE_S * 8
+
+BUTTON1_TOGGLE * +10
+BUTTON2_TOGGLE * FREEZE
+#BUTTON3_TOGGLE * LIST
+
+BUTTON1_CLICK * 5
+BUTTON2_CLICK * 0
+#BUTTON3_CLICK * POWER
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro
new file mode 100644
index 0000000..4e495c8
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro
@@ -0,0 +1,134 @@
+#
+# This is an example of ~/.lircrc file
+# It is a copy of actual setup from my home machine.
+# Contributed by Artur Lipowski <alipowski@interia.pl>
+#
+ begin
+ prog = irexec
+ button = power
+ config = xawtv-remote quit
+ flags = mode
+ end
+ begin
+ prog = irexec
+ button = source
+ repeat = 1
+ config = xawtv-remote setinput next
+ end
+ begin
+ prog = irexec
+ button = zoom
+ repeat = 1
+ config = xawtv-remote fullscreen
+ end
+ begin
+ prog = irexec
+ button = chan-
+ repeat = 1
+ config = xawtv-remote setstation prev
+ end
+ begin
+ prog = irexec
+ button = chan+
+ repeat = 1
+ config = xawtv-remote setstation next
+ end
+ begin
+ prog = irxevent
+ button = loop
+ repeat = 1
+ config = Key c xawtv
+ end
+ begin
+ prog = irxevent
+ button = scan
+ repeat = 1
+ config = Key ctrl-z xawtv
+ end
+ begin
+ prog = irxevent
+ button = mute
+ config = Key a xawtv
+ end
+ begin
+ prog = irxevent
+ button = vol+
+ repeat = 1
+ config = Key KP_Add xawtv
+ end
+ begin
+ prog = irxevent
+ button = vol-
+ repeat = 1
+ config = Key KP_Subtract xawtv
+ end
+ begin
+ prog = irexec
+ button = 1
+ config = xawtv-remote setstation 0
+ end
+ begin
+ prog = irexec
+ button = 2
+ config = xawtv-remote setstation 1
+ end
+ begin
+ prog = irexec
+ button = 3
+ config = xawtv-remote setstation 2
+ end
+ begin
+ prog = irexec
+ button = 4
+ config = xawtv-remote setstation 3
+ end
+ begin
+ prog = irexec
+ button = 5
+ config = xawtv-remote setstation 4
+ end
+ begin
+ prog = irexec
+ button = 6
+ config = xawtv-remote setstation 5
+ end
+ begin
+ prog = irexec
+ button = 7
+ config = xawtv-remote setstation 6
+ end
+ begin
+ prog = irexec
+ button = 8
+ config = xawtv-remote setstation 7
+ end
+ begin
+ prog = irexec
+ button = 9
+ config = xawtv-remote setstation 8
+ end
+ begin
+ prog = irexec
+ button = 0
+ config = xawtv-remote setstation 0
+ end
+ begin
+ prog = irexec
+ button = function
+ config = xawtv-remote attr next
+ end
+ begin
+ prog = irexec
+ button = fn+
+ config = xawtv-remote attr inc
+ end
+ begin
+ prog = irexec
+ button = fn-
+ config = xawtv-remote attr dec
+ end
+ begin
+ prog = irexec
+ button = +100
+ config = xawtv-remote msg " `date +%H:%M` "
+ end
diff --git a/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951
new file mode 100644
index 0000000..e488424
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951
@@ -0,0 +1,67 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.1 on Wed May 24 23:10:08 2000
+#
+# contributed by BartOwl <bartowl@dione.ids.pl>
+#
+# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/
+# model: PV951 (http://www.jsir.com/pv951.htm)
+# supported devices: Remote control for this TV-capture card
+#
+# The manufacturer seems to be ProVideo: http://www.provideo.com.tw
+# Funny: they have Linux "drivers" for this card...
+#
+
+begin remote
+
+ name PV951
+ bits 16
+ flags SPACE_ENC|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ header 9067 4482
+ one 597 1650
+ zero 597 529
+ ptrail 584
+ repeat 9068 2232
+ pre_data_bits 16
+ pre_data 0x61D6
+ gap 107983
+ repeat_bit 0
+
+ begin codes
+ power 0x00000000000048B7
+ air/cbl 0x000000000000D02F
+ pc/tv 0x0000000000008877
+ source 0x000000000000F00F
+ mts 0x000000000000C837
+ mute 0x00000000000008F7
+ 1 0x000000000000807F
+ 2 0x00000000000040BF
+ 3 0x000000000000C03F
+ 4 0x00000000000020DF
+ 5 0x000000000000A05F
+ 6 0x000000000000609F
+ 7 0x000000000000E01F
+ 8 0x00000000000010EF
+ 9 0x000000000000906F
+ 0 0x00000000000000FF
+ +100 0x00000000000050AF
+ ch_rtn 0x000000000000E817
+ ch+ 0x00000000000058A7
+ ch- 0x0000000000007887
+ vol+ 0x000000000000D827
+ vol- 0x000000000000F807
+ func 0x0000000000009867
+ ttx 0x000000000000B04F
+ pg+ 0x000000000000708F
+ pg- 0x000000000000B847
+ cc 0x0000000000006897
+ sync 0x00000000000028D7
+ ch+- 0x00000000000018E7
+ autoscan 0x00000000000030CF
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id
new file mode 100644
index 0000000..4070964
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id
@@ -0,0 +1,33 @@
+0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc."
+0bc7:0008|SnapStream_Firefly| "SnapStream Firefly"
+10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver"
+0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder"
+0e9c:0000|streamzap| "Streamzap Remote"
+0fe9:9010|dvico| "DVICO Remote:"
+6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone "
+1509:9242|MCEUSB-new| "FIC eHome Infrared Transceiver 1509/9242"
+1934:0602|MCEUSB-new| "Fintek eHome Infrared Transceiver 1934/0602"
+147a:e015|MCEUSB-new| "Formosa eHome Infrared Transceiver 147a/e015"
+147a:e017|MCEUSB-new| "Formosa aim / Trust MCE Infrared Receiver147a/e017"
+147a:e018|MCEUSB-new| "Formosa Industrial Computing 147a/e018"
+107b:3009|MCEUSB-new| "Gateway eHome Infrared Transceiver 107b/3009"
+195d:7002|MCEUSB-new| "Itron ione Libra Q-11 195d/7002"
+043e:9803|MCEUSB-new| "LG eHome Infrared Transceiver 043e/9803"
+045e:00a0|MCEUSB-new| "Microsoft MCE Infrared Transceiver 045e/00a0"
+03ee:2501|MCEUSB-new| "Mitsumi 03ee/2501"
+0471:060c|MCEUSB-new| "Philips Infrared Transciever - HP branded 0471/060C"
+0471:060d|MCEUSB-new| "Philips SRM5100 0471/060d"
+0471:0815|MCEUSB-new| "Philips eHome Infrared Transciever 0471/0815"
+2304:0225|MCEUSB-new| "Pinnacle Systems, Inc. 2304/0225"
+179d:0010|MCEUSB-new| "Ricavision internal Infrared Transceiver 179d/0010"
+1308:c001|MCEUSB-new| "Shuttle eHome Infrared Transceiver 1308/c001"
+051c:c001|MCEUSB-new| "Shuttle2 eHome Infrared Transceiver 051c/c001"
+0609:031d|MCEUSB-new| "SMK/Toshiba G83C0004D410 0609/031d"
+0609:0322|MCEUSB-new| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322"
+0609:0334|MCEUSB-new| "SKM bundled with Hauppauge PVR-150 0609/0334"
+1460:9150|MCEUSB-new| "Tatung eHome Infrared Transceiver 1460/9150"
+1784:0001|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0001"
+1784:0006|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0006"
+1784:0007|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0007"
+1784:0008|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0008"
+045e:006d|MCEUSB-old| "USB Microsoft IR Transceiver Driver 045e/006d"
diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130
new file mode 100644
index 0000000..1797647
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130
@@ -0,0 +1,88 @@
+#
+# brand: Remotec
+# model no. of remote control: BW 6130 Multimedia Master Receiver
+# devices being controlled by this remote:
+#
+
+begin remote
+
+ name MEDIAMASTER
+ bits 32
+ eps 0
+ aeps 0
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 32
+ pre_data 0xFFA10003
+ gap 131980
+ post_data_bits 0
+ toggle_bit 0
+
+ begin codes
+ PRE 0x23
+ NEXT 0x24
+ 1 0X10
+ 2 0x11
+ 3 0x12
+ POWER 0x50
+ VOL+ 0x30
+ VOL- 0x31
+ L 0x42
+ R 0x44
+ PAUSE 0x22
+ PLAY 0x20
+ STOP 0x21
+ MUTE 0x32
+ MOUSE_SLOW_N 0x95
+ MOUSE_SLOW_NNE 0xd1
+ MOUSE_SLOW_NE 0xcd
+ MOUSE_SLOW_ENE 0xc9
+ MOUSE_SLOW_E 0xc5
+ MOUSE_SLOW_ESE 0xe9
+ MOUSE_SLOW_SE 0xed
+ MOUSE_SLOW_SSE 0xf1
+ MOUSE_SLOW_S 0xb5
+ MOUSE_SLOW_SSW 0xb1
+ MOUSE_SLOW_SW 0xad
+ MOUSE_SLOW_WSW 0xa9
+ MOUSE_SLOW_W 0x85
+ MOUSE_SLOW_WNW 0x89
+ MOUSE_SLOW_NW 0x8d
+ MOUSE_SLOW_NNW 0x91
+ MOUSE_MEDIUM_N 0x96
+ MOUSE_MEDIUM_NNE 0xd2
+ MOUSE_MEDIUM_NE 0xce
+ MOUSE_MEDIUM_ENE 0xca
+ MOUSE_MEDIUM_E 0xc6
+ MOUSE_MEDIUM_ESE 0xea
+ MOUSE_MEDIUM_SE 0xee
+ MOUSE_MEDIUM_SSE 0xf2
+ MOUSE_MEDIUM_S 0xb6
+ MOUSE_MEDIUM_SSW 0xb2
+ MOUSE_MEDIUM_SW 0xae
+ MOUSE_MEDIUM_WSW 0xaa
+ MOUSE_MEDIUM_W 0x86
+ MOUSE_MEDIUM_WNW 0x8a
+ MOUSE_MEDIUM_NW 0x8e
+ MOUSE_MEDIUM_NNW 0x92
+ MOUSE_FAST_N 0x97
+ MOUSE_FAST_NNE 0xd3
+ MOUSE_FAST_NE 0xcf
+ MOUSE_FAST_ENE 0xcb
+ MOUSE_FAST_E 0xc7
+ MOUSE_FAST_ESE 0xeb
+ MOUSE_FAST_SE 0xef
+ MOUSE_FAST_SSE 0xf3
+ MOUSE_FAST_S 0xb7
+ MOUSE_FAST_SSW 0xb3
+ MOUSE_FAST_SW 0xaf
+ MOUSE_FAST_WSW 0xab
+ MOUSE_FAST_W 0x87
+ MOUSE_FAST_WNW 0x8b
+ MOUSE_FAST_NW 0x8f
+ MOUSE_FAST_NNW 0x93
+ end codes
+
+end remote
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130
new file mode 100644
index 0000000..f056530
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130
@@ -0,0 +1,291 @@
+#
+# lircmd config file
+# simply copied/edited x10/mouseremote lircmd file
+#
+
+PROTOCOL IntelliMouse
+#PROTOCOL MouseSystems
+
+# ACCELERATOR start max multiplier
+
+TOGGLE_ACTIVATE MEDIAMASTER 3
+
+ACCELERATOR 1 3 2
+
+
+MOVE_N MEDIAMASTER MOUSE_SLOW_N
+MOVE_N MEDIAMASTER MOUSE_SLOW_N
+
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
+
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+MOVE_N MEDIAMASTER MOUSE_FAST_N
+
+MOVE_N MEDIAMASTER MOUSE_SLOW_NNE
+MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE
+
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE
+
+MOVE_N MEDIAMASTER MOUSE_FAST_NNE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
+MOVE_N MEDIAMASTER MOUSE_FAST_NNE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
+MOVE_N MEDIAMASTER MOUSE_FAST_NNE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
+MOVE_N MEDIAMASTER MOUSE_FAST_NNE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
+
+MOVE_NE MEDIAMASTER MOUSE_SLOW_NE
+MOVE_NE MEDIAMASTER MOUSE_SLOW_NE
+
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
+
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+MOVE_NE MEDIAMASTER MOUSE_FAST_NE
+
+MOVE_E MEDIAMASTER MOUSE_SLOW_ENE
+MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE
+
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE
+MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE
+
+MOVE_E MEDIAMASTER MOUSE_FAST_ENE
+MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
+MOVE_E MEDIAMASTER MOUSE_FAST_ENE
+MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
+MOVE_E MEDIAMASTER MOUSE_FAST_ENE
+MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
+MOVE_E MEDIAMASTER MOUSE_FAST_ENE
+MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
+
+MOVE_E MEDIAMASTER MOUSE_SLOW_E
+MOVE_E MEDIAMASTER MOUSE_SLOW_E
+
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
+
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+MOVE_E MEDIAMASTER MOUSE_FAST_E
+
+MOVE_E MEDIAMASTER MOUSE_SLOW_ESE
+MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE
+
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE
+MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE
+
+MOVE_E MEDIAMASTER MOUSE_FAST_ESE
+MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
+MOVE_E MEDIAMASTER MOUSE_FAST_ESE
+MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
+MOVE_E MEDIAMASTER MOUSE_FAST_ESE
+MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
+MOVE_E MEDIAMASTER MOUSE_FAST_ESE
+MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
+
+MOVE_SE MEDIAMASTER MOUSE_SLOW_SE
+MOVE_SE MEDIAMASTER MOUSE_SLOW_SE
+
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
+
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SE
+
+MOVE_S MEDIAMASTER MOUSE_SLOW_SSE
+MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE
+
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE
+MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE
+
+MOVE_S MEDIAMASTER MOUSE_FAST_SSE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
+MOVE_S MEDIAMASTER MOUSE_FAST_SSE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
+MOVE_S MEDIAMASTER MOUSE_FAST_SSE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
+MOVE_S MEDIAMASTER MOUSE_FAST_SSE
+MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
+
+MOVE_S MEDIAMASTER MOUSE_SLOW_S
+MOVE_S MEDIAMASTER MOUSE_SLOW_S
+
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
+
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+MOVE_S MEDIAMASTER MOUSE_FAST_S
+
+MOVE_S MEDIAMASTER MOUSE_SLOW_SSW
+MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW
+
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW
+MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW
+
+MOVE_S MEDIAMASTER MOUSE_FAST_SSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
+MOVE_S MEDIAMASTER MOUSE_FAST_SSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
+MOVE_S MEDIAMASTER MOUSE_FAST_SSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
+MOVE_S MEDIAMASTER MOUSE_FAST_SSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
+
+MOVE_SW MEDIAMASTER MOUSE_SLOW_SW
+MOVE_SW MEDIAMASTER MOUSE_SLOW_SW
+
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
+
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+MOVE_SW MEDIAMASTER MOUSE_FAST_SW
+
+MOVE_W MEDIAMASTER MOUSE_SLOW_WSW
+MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW
+
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW
+MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW
+
+MOVE_W MEDIAMASTER MOUSE_FAST_WSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
+MOVE_W MEDIAMASTER MOUSE_FAST_WSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
+MOVE_W MEDIAMASTER MOUSE_FAST_WSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
+MOVE_W MEDIAMASTER MOUSE_FAST_WSW
+MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
+
+MOVE_W MEDIAMASTER MOUSE_SLOW_W
+MOVE_W MEDIAMASTER MOUSE_SLOW_W
+
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
+
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+MOVE_W MEDIAMASTER MOUSE_FAST_W
+
+MOVE_W MEDIAMASTER MOUSE_SLOW_WNW
+MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW
+
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW
+MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW
+
+MOVE_W MEDIAMASTER MOUSE_FAST_WNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
+MOVE_W MEDIAMASTER MOUSE_FAST_WNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
+MOVE_W MEDIAMASTER MOUSE_FAST_WNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
+MOVE_W MEDIAMASTER MOUSE_FAST_WNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
+
+MOVE_NW MEDIAMASTER MOUSE_SLOW_NW
+MOVE_NW MEDIAMASTER MOUSE_SLOW_NW
+
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
+
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NW
+
+MOVE_N MEDIAMASTER MOUSE_SLOW_NNW
+MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW
+
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW
+MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW
+MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW
+
+MOVE_N MEDIAMASTER MOUSE_FAST_NNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
+MOVE_N MEDIAMASTER MOUSE_FAST_NNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
+MOVE_N MEDIAMASTER MOUSE_FAST_NNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
+MOVE_N MEDIAMASTER MOUSE_FAST_NNW
+MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
+
+BUTTON1_CLICK MEDIAMASTER L
+BUTTON3_CLICK MEDIAMASTER R
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem
new file mode 100644
index 0000000..da0fb82
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem
@@ -0,0 +1,81 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004
+#
+# contributed by Oliver Stabel (oliver.stabel@gmx.de)
+#
+# brand: Sasem OnAir
+# model no. of remote control: n/a
+# devices being controlled by this remote:
+# This IR came with the Dign HV5 HTPC case, manufactured
+# by Uneed in Korea (www.iuneed.com).
+# AFAIK the case is called Ahanix HV5 in the US.
+# The IR/VFD device is originally manufactured by Sasem,
+# and sold as OnAir Remocon-V (?looks different from
+# mine but should be the same?)
+#
+
+begin remote
+
+ name lirc_sasem
+ bits 16
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 24
+ pre_data 0x0C807F
+ post_data_bits 24
+ post_data 0x000000
+ gap 196000
+ toggle_bit 0
+
+
+ begin codes
+ 1 0x08F7
+ 2 0x09F6
+ 3 0x0AF5
+ 4 0x10EF
+ 5 0x11EE
+ 6 0x12ED
+ 7 0x18E7
+ 8 0x19E6
+ 9 0x1AE5
+ start 0x40BF
+ 0 0x41BE
+ full_down 0x06F9
+ vol- 0x0FF0
+ vol+ 0x0EF1
+ esc 0x05FA
+ up 0x0BF4
+ close 0x07F8
+ left 0x03FC
+ enter 0x13EC
+ right 0x1BE4
+ prev 0x0CF3
+ down 0x43BC
+ next 0x01FE
+ mute 0x0DF2
+ step 0x04FB
+ play_pause 0x49B6
+ stop 0x48B7
+ winamp 0x1EE1
+ media_player 0x15EA
+ hdtv 0x17E8
+ cd_player 0x16E9
+ win_dvd 0x44BB
+ power_dvd 0x14EB
+ internet 0x46B9
+ email 0x47B8
+ a 0x45BA
+ b 0x1DE2
+ c 0x1CE3
+ d 0x1FE0
+ eject 0x02FD
+ power 0x00FF
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic
new file mode 100644
index 0000000..8aa4ef5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic
@@ -0,0 +1,83 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000
+#
+# contributed by Stefan Neuwirth & Andreas Lange <langsmethanromp@gmx.de>
+#
+# brand: Sigma Designs
+# model: REALmagic remote control
+# www.realmagic.com/support.htm#remote
+# supported devices:
+# "For Hollywood Plus Version 1.4 or above Driver only"
+# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card
+# receiver is connected to the serial port - it does not require the card
+#
+# The first byte always is 131. The second and third byte are equal. (CB)
+#
+
+begin remote
+
+ name REALmagic
+ bits 20
+ eps 30
+ aeps 100
+
+ one 0 0
+ zero 0 0
+ pre_data_bits 10
+ pre_data 0x183
+ gap 189974
+ toggle_bit 0
+
+
+ begin codes
+ 1 0x0000000000062D8B
+ 2 0x0000000000012C4B
+ 3 0x000000000001AC6B
+ 4 0x0000000000072DCB
+ 5 0x000000000000AC2B
+ 6 0x0000000000052D4B
+
+# Nicolas Vignal reported that this code is sent for his remote
+# version (1.5). It should be no problem to just have two entries for
+# "6" unless you want to send codes what won't work for this receiver
+# anyway.
+
+ 6 0x0000000000041505
+
+ 7 0x0000000000058561
+ 8 0x0000000000044511
+ 9 0x000000000004AD2B
+ 0 0x000000000004C531
+ VOL+ 0x0000000000022C8B
+ VOL- 0x0000000000032CCB
+ MUTE 0x000000000006ADAB
+ L-R 0x0000000000052549
+ VGA 0x0000000000054551
+ ENTER 0x0000000000042509
+ QUIT 0x0000000000058D63
+ PRG 0x0000000000038CE3
+ UP 0x0000000000078DE3
+ DOWN 0x0000000000064D93
+ LEFT 0x0000000000044D13
+ RIGHT 0x000000000003ECFB
+ SELECT 0x0000000000024C93
+ MENU 0x0000000000014C53
+ TITLE 0x0000000000054D53
+ OSD 0x0000000000034CD3
+ LANG 0x0000000000074DD3
+ ANGLE 0x000000000000CC33
+ SUB 0x000000000004CD33
+ PAUSE 0x000000000002CCB3
+ STOP 0x000000000006CDB3
+ PLAY 0x000000000001CC73
+ EJECT 0x000000000005CD73
+ REV 0x000000000003CCF3
+ FF 0x000000000007CDF3
+ PREV 0x0000000000002C0B
+ NEXT 0x0000000000042D0B
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek
new file mode 100644
index 0000000..090afb9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek
@@ -0,0 +1,97 @@
+#
+#
+# contributed by Krister Wicksell <krister.wicksell@spray.se>
+#
+# brand: Silitek
+# model: SM-1000
+# supported devices:
+#
+
+begin remote
+
+ name SILITEK_SM-1000
+ bits 24
+ repeat_bit 0
+
+ begin codes
+ MOUSE_E 0x0000000000aa0001
+ MOUSE_NEE 0x0000000000aa0102
+ MOUSE_NE 0x0000000000aa0103
+ MOUSE_NNE 0x0000000000aa0104
+ MOUSE_N 0x0000000000aa0105
+ MOUSE_NNW 0x0000000000aa1104
+ MOUSE_NW 0x0000000000aa1103
+ MOUSE_NWW 0x0000000000aa1102
+ MOUSE_W 0x0000000000aa1001
+ MOUSE_SWW 0x0000000000aa1002
+ MOUSE_SW 0x0000000000aa1003
+ MOUSE_SSW 0x0000000000aa1004
+ MOUSE_S 0x0000000000aa0005
+ MOUSE_SSE 0x0000000000aa0004
+ MOUSE_SE 0x0000000000aa0003
+ MOUSE_SEE 0x0000000000aa0002
+ MOUSE_R_BUTTON 0x0000000000aaa0bb
+ MOUSE_L_BUTTON 0x0000000000aa0abb
+ MOUSE_L+R_BUTTON 0x0000000000aaaabb
+
+ 0 0x0000000000bb4a75
+ 1 0x0000000000bbc1fe
+ 2 0x0000000000bbc2fd
+ 3 0x0000000000bb437c
+ 4 0x0000000000bbc4fb
+ 5 0x0000000000bb457a
+ 6 0x0000000000bb4679
+ 7 0x0000000000bbc7f8
+ 8 0x0000000000bbc8f7
+ 9 0x0000000000bb4976
+ * 0x0000000000bbcbf4
+ # 0x0000000000bb4c73
+ REW 0x0000000000bb516e
+ FWD 0x0000000000bbd0ef
+ PAUSE 0x0000000000bbcef1
+ PLAY 0x0000000000bbcdf2
+ STOP 0x0000000000bb4f70
+ VOLUME_UP 0x0000000000bbd3ec
+ VOLUME_DOWN 0x0000000000bb546b
+ MUTE 0x0000000000bb526d
+ DISPLAY 0x0000000000bbd5ea
+ CD 0x0000000000bbdae5
+ SHOW_WIZ 0x0000000000bb5b64
+ PG_UP 0x0000000000bbd6e9
+ PG_DN 0x0000000000bb5768
+ BACK 0x0000000000bb5867
+ FORWARD 0x0000000000bbd9e6
+ WWW 0x0000000000bbdce3
+ CLOSE 0x0000000000bb5d62
+
+ 0_UP 0x0000000000cc4a75
+ 1_UP 0x0000000000ccc1fe
+ 2_UP 0x0000000000ccc2fd
+ 3_UP 0x0000000000cc437c
+ 4_UP 0x0000000000ccc4fb
+ 5_UP 0x0000000000cc457a
+ 6_UP 0x0000000000cc4679
+ 7_UP 0x0000000000ccc7f8
+ 8_UP 0x0000000000ccc8f7
+ 9_UP 0x0000000000cc4976
+ *_UP 0x0000000000cccbf4
+ #_UP 0x0000000000cc4c73
+ REW_UP 0x0000000000cc516e
+ FWD_UP 0x0000000000ccd0ef
+ PAUSE_UP 0x0000000000cccef1
+ PLAY_UP 0x0000000000cccdf2
+ STOP_UP 0x0000000000cc4f70
+ VOLUME_UP_UP 0x0000000000ccd3ec
+ VOLUME_DOWN_UP 0x0000000000cc546b
+ MUTE_UP 0x0000000000cc526d
+ DISPLAY_UP 0x0000000000ccd5ea
+ CD_UP 0x0000000000ccdae5
+ SHOW_WIZ_UP 0x0000000000cc5b64
+ PG_UP_UP 0x0000000000ccd6e9
+ PG_DN_UP 0x0000000000cc5768
+ BACK_UP 0x0000000000cc5867
+ FORWARD_UP 0x0000000000ccd9e6
+ WWW_UP 0x0000000000ccdce3
+ CLOSE_UP 0x0000000000cc5d62
+ end codes
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek
new file mode 100644
index 0000000..fc93f79
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek
@@ -0,0 +1,72 @@
+#
+# lircmd config file for the Silitek control
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 1 4 2
+
+#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ
+
+MOVE_N SILITEK_SM-1000 MOUSE_N
+MOVE_N SILITEK_SM-1000 MOUSE_N
+
+MOVE_N SILITEK_SM-1000 MOUSE_NNE
+MOVE_NE SILITEK_SM-1000 MOUSE_NNE
+
+MOVE_NE SILITEK_SM-1000 MOUSE_NE
+MOVE_NE SILITEK_SM-1000 MOUSE_NE
+
+MOVE_E SILITEK_SM-1000 MOUSE_NEE
+MOVE_NE SILITEK_SM-1000 MOUSE_NEE
+
+MOVE_E SILITEK_SM-1000 MOUSE_E
+MOVE_E SILITEK_SM-1000 MOUSE_E
+
+MOVE_E SILITEK_SM-1000 MOUSE_SEE
+MOVE_SE SILITEK_SM-1000 MOUSE_SEE
+
+MOVE_SE SILITEK_SM-1000 MOUSE_SE
+MOVE_SE SILITEK_SM-1000 MOUSE_SE
+
+MOVE_S SILITEK_SM-1000 MOUSE_SSE
+MOVE_SE SILITEK_SM-1000 MOUSE_SSE
+
+MOVE_S SILITEK_SM-1000 MOUSE_S
+MOVE_S SILITEK_SM-1000 MOUSE_S
+
+MOVE_S SILITEK_SM-1000 MOUSE_SSW
+MOVE_SW SILITEK_SM-1000 MOUSE_SSW
+
+MOVE_SW SILITEK_SM-1000 MOUSE_SW
+MOVE_SW SILITEK_SM-1000 MOUSE_SW
+
+MOVE_W SILITEK_SM-1000 MOUSE_SWW
+MOVE_SW SILITEK_SM-1000 MOUSE_SWW
+
+MOVE_W SILITEK_SM-1000 MOUSE_W
+MOVE_W SILITEK_SM-1000 MOUSE_W
+
+MOVE_W SILITEK_SM-1000 MOUSE_NWW
+MOVE_NW SILITEK_SM-1000 MOUSE_NWW
+
+MOVE_NW SILITEK_SM-1000 MOUSE_NW
+MOVE_NW SILITEK_SM-1000 MOUSE_NW
+
+MOVE_N SILITEK_SM-1000 MOUSE_NNW
+MOVE_NW SILITEK_SM-1000 MOUSE_NNW
+
+MOVE_IN SILITEK_SM-1000 PG_UP
+MOVE_OUT SILITEK_SM-1000 PG_DN
+
+BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY
+#BUTTON2_TOGGLE SILITEK_SM-1000 5
+#BUTTON3_TOGGLE SILITEK_SM-1000 6
+
+BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON
+BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON
+BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON
+
+# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
new file mode 100644
index 0000000..288bb51
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
@@ -0,0 +1,127 @@
+# Please make this file available to others
+# by sending it to <lirc@bartelmus.de>
+#
+# this config file was automatically generated
+# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005
+#
+# contributed by
+#
+# brand: Snapstream Firefly Remote
+# model no. of remote control:
+# devices being controlled by this remote:
+#
+
+begin remote
+
+name Snapstream_Firefly
+bits 40
+eps 30
+aeps 100
+
+one 0 0
+zero 0 0
+gap 219964
+toggle_bit 0
+
+
+begin codes
+MAXI 0x0000001481AC0000
+MAXI 0x00000014012C0000
+CLOSE 0x00000014D7020000
+CLOSE 0x0000001457820000
+1 0x00000014628D0000
+1 0x00000014E20D0000
+2 0x00000014E30E0000
+2 0x00000014638E0000
+3 0x00000014648F0000
+3 0x00000014E40F0000
+4 0x00000014E5100000
+4 0x0000001465900000
+5 0x0000001466910000
+5 0x00000014E6110000
+6 0x00000014E7120000
+6 0x0000001467920000
+7 0x0000001468930000
+7 0x00000014E8130000
+8 0x00000014E9140000
+8 0x0000001469940000
+9 0x000000146A950000
+9 0x00000014EA150000
+0 0x00000014EC170000
+0 0x000000146C970000
+BACK 0x000000146B960000
+BACK 0x00000014EB160000
+ENT 0x00000014ED180000
+ENT 0x000000146D980000
+VOL+ 0x000000145E890000
+VOL+ 0x00000014DE090000
+VOL- 0x000000145D880000
+VOL- 0x00000014DD080000
+MUTE 0x000000145F8A0000
+MUTE 0x00000014DF0A0000
+FIREFLY 0x0000001455800000
+FIREFLY 0x00000014D5000000
+CH+ 0x00000014608B0000
+CH+ 0x00000014E00B0000
+CH- 0x00000014618C0000
+CH- 0x00000014E10C0000
+INFO 0x0000001483AE0000
+INFO 0x00000014032E0000
+OPTION 0x0000001484AF0000
+OPTION 0x00000014042F0000
+UP 0x000000146F9A0000
+UP 0x00000014EF1A0000
+LEFT 0x00000014729D0000
+LEFT 0x00000014F21D0000
+DOWN 0x0000001477A20000
+DOWN 0x00000014F7220000
+RIGHT 0x00000014749F0000
+RIGHT 0x00000014F41F0000
+OK 0x00000014739E0000
+OK 0x00000014F31E0000
+MENU 0x00000014719C0000
+MENU 0x00000014F11C0000
+EXIT 0x0000001475A00000
+EXIT 0x00000014F5200000
+REC 0x00000014FC270000
+REC 0x000000147CA70000
+PLAY 0x00000014FA250000
+PLAY 0x000000147AA50000
+STOP 0x00000014FD280000
+STOP 0x000000147DA80000
+REW 0x00000014F9240000
+REW 0x0000001479A40000
+FWD 0x00000014FB260000
+FWD 0x000000147BA60000
+PREV 0x00000014002B0000
+PREV 0x0000001480AB0000
+PAUSE 0x00000014FE290000
+PAUSE 0x000000147EA90000
+NEXT 0x00000014FF2A0000
+NEXT 0x000000147FAA0000
+MUSIC 0x00000014DB060000
+MUSIC 0x000000145B860000
+PHOTOS 0x00000014DA050000
+PHOTOS 0x000000145A850000
+DVD 0x00000014D9040000
+DVD 0x0000001459840000
+TV 0x00000014D8030000
+TV 0x0000001458830000
+VIDEO 0x00000014DC070000
+VIDEO 0x000000145C870000
+HELP 0x00000014D6010000
+HELP 0x0000001456810000
+MOUSE 0x00000014022D0000
+MOUSE 0x0000001482AD0000
+A 0x00000014EE190000
+A 0x000000146E990000
+B 0x00000014F01B0000
+B 0x00000014709B0000
+C 0x00000014F6210000
+C 0x0000001476A10000
+D 0x00000014F8230000
+D 0x0000001478A30000
+
+end codes
+
+end remote
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
new file mode 100644
index 0000000..e918011
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
@@ -0,0 +1,590 @@
+# ~/.mythtv/lircrc
+#
+# MythTV native LIRC config file for
+# the new grey Hauppauge remote
+#
+# Modified from Jarod Wilson's which came from Jeff Campbell's
+# By Brad Templeton
+
+
+# Here we have the jump point commands. They only work if you have
+# defined function keys for these jump points. For me the most
+# common command is the menu of recordings, so I put that on "videos"
+# even though that's counter-intuitive
+
+begin
+prog = mythtv
+button = TV
+repeat = 3
+config = F5
+end
+
+begin
+prog = mythtv
+button = Videos
+repeat = 3
+config = F2
+end
+
+# Not yet defined
+begin
+prog = mythtv
+button = Music
+repeat = 3
+config = Up
+end
+
+# Given another function for now, I don't use mythgallery
+begin
+prog = mythtv
+button = Pictures
+repeat = 3
+config = F
+end
+
+begin
+prog = mythtv
+button = Guide
+repeat = 3
+config = F3
+end
+
+# I stuck the "todo" list on here as Myth has no radio function
+begin
+prog = mythtv
+button = Radio
+repeat = 3
+config = F4
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = LEFT
+repeat = 3
+config = Left
+end
+
+begin
+prog = mythtv
+button = RIGHT
+repeat = 3
+config = Right
+end
+
+# Channel Up
+begin
+prog = mythtv
+button = Channel-UP
+repeat = 3
+config = Up
+end
+
+# Channel Down
+begin
+prog = mythtv
+button = Channel-DOWN
+repeat = 3
+config = Down
+end
+
+# OK/Select
+begin
+prog = mythtv
+button = Ok
+config = Space
+end
+
+# Play
+begin
+prog = mythtv
+button = Play
+config = Return
+end
+
+# Stop
+begin
+prog = mythtv
+button = Stop
+config = I
+end
+
+# Escape/Exit/Back
+begin
+prog = mythtv
+button = BACK
+config = Esc
+end
+
+# Power Off/Exit
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+
+# Pause
+begin
+prog = mythtv
+button = Pause
+repeat = 3
+config = P
+end
+
+# Mute
+begin
+prog = mythtv
+button = Mute
+repeat = 3
+config = |
+end
+
+# Fast forward (30 sec default)
+begin
+prog = mythtv
+button = Rewind
+repeat = 3
+config = PgUp
+end
+
+# Rewind (10 sec default)
+begin
+prog = mythtv
+button = Forward
+repeat = 3
+config = PgDown
+end
+
+# Skip forward (10 min default)
+begin
+prog = mythtv
+button = Next
+repeat = 3
+config = End
+end
+
+# Skip backward (10 min default)
+begin
+prog = mythtv
+button = Previous
+repeat = 3
+config = Home
+end
+
+# Record
+begin
+prog = mythtv
+button = Record
+repeat = 3
+config = R
+end
+
+# Delete
+begin
+prog = mythtv
+button = Red
+repeat = 3
+config = D
+end
+
+# Decrease play speed
+begin
+prog = mythtv
+button = Green
+repeat = 3
+config = J
+end
+
+# Display EPG while in live TV,
+# View selected show while in EPG
+begin
+prog = mythtv
+button = Menu
+repeat = 3
+config = M
+end
+
+# Scroll up
+begin
+prog = mythtv
+button = Volume-UP
+repeat = 3
+config = F11
+end
+
+# Scroll down
+begin
+prog = mythtv
+button = Volume-DOWN
+repeat = 3
+config = F10
+end
+
+# Bring up OSD info
+begin
+prog = mythtv
+button = Go
+repeat = 3
+config = I
+end
+
+# Change display aspect ratio
+begin
+prog = mythtv
+button = Prev-Channel
+repeat = 3
+config = W
+end
+
+# double speed watch
+begin
+prog = mythtv
+button = Yellow
+repeat = 3
+config = J
+end
+
+# change tuners
+#begin
+#prog = mythtv
+#button = hash
+#repeat = 3
+#config = Y
+#end
+
+# Bring up Time stretch
+begin
+prog = mythtv
+button = Blue
+repeat = 3
+config = Y
+end
+
+# Numbers 0-9
+
+begin
+prog = mythtv
+button = 0
+repeat = 3
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+repeat = 3
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+repeat = 3
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+repeat = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+repeat = 3
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+repeat = 3
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+repeat = 3
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+repeat = 3
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+repeat = 3
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+repeat = 3
+config = 9
+end
+
+
+### MPlayer lirc setup
+
+# Show OSD
+begin
+prog = mplayer
+button = MENU
+repeat = 3
+config = osd
+end
+
+# Pause playback
+begin
+prog = mplayer
+button = PAUSE
+repeat = 3
+config = pause
+end
+
+# Skip ahead a minute if playing
+# If paused, resume playing
+begin
+prog = mplayer
+button = PLAY
+repeat = 3
+config = seek +1
+end
+
+# Stop playback and exit
+begin
+prog = mplayer
+button = Back
+repeat = 3
+config = quit
+end
+
+# Mute
+begin
+prog = mplayer
+button = MUTE
+repeat = 3
+config = mute
+end
+
+# Seek back 10 seconds
+begin
+prog = mplayer
+button = LEFT
+repeat = 3
+config = seek -7
+end
+
+# Seek forward 30 seconds
+begin
+prog = mplayer
+button = RIGHT
+repeat = 3
+config = seek +30
+end
+
+# Quit
+begin
+prog = mplayer
+button = EXIT
+repeat = 3
+config = quit
+end
+
+# Seek forward 10 minutes
+begin
+prog = mplayer
+button = SKIP
+repeat = 3
+config = seek +600
+end
+
+# Seek backward 10 minutes
+begin
+prog = mplayer
+button = REPLAY
+repeat = 3
+config = seek -600
+end
+
+# Toggle full-screen
+begin
+prog = mplayer
+button = FULL
+repeat = 3
+config = vo_fullscreen
+end
+
+### Xine lirc setup
+
+begin
+prog = xine
+button = PLAY
+repeat = 3
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 3
+config = Stop
+end
+
+begin
+prog = xine
+button = OFF
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = PAUSE
+repeat = 3
+config = Pause
+end
+
+begin
+prog = xine
+button = CH+
+repeat = 3
+config = EventUp
+end
+
+begin
+prog = xine
+button = CH-
+repeat = 3
+config = EventDown
+end
+
+begin
+prog = xine
+button = VOL-
+repeat = 3
+config = EventLeft
+end
+
+begin
+prog = xine
+button = VOL+
+repeat = 3
+config = EventRight
+end
+
+begin
+prog = xine
+button = OK
+repeat = 3
+config = EventSelect
+end
+
+begin
+prog = xine
+button = BACK
+repeat = 3
+config = Menu
+end
+
+begin
+prog = xine
+button = FFW
+repeat = 3
+#config = SpeedFaster
+config = SeekRelative+60
+end
+
+begin
+prog = xine
+button = REW
+repeat = 3
+#config = SpeedSlower
+config = SeekRelative-60
+end
+
+begin
+prog = xine
+button = FULL
+repeat = 3
+config = Volume+
+end
+
+begin
+prog = xine
+button = BLANK
+repeat = 3
+config = Volume-
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 3
+config = Mute
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 3
+config = RootMenu
+end
+
+begin
+prog = xine
+button = SKIP
+repeat = 3
+config = EventNext
+end
+
+begin
+prog = xine
+button = REPLAY
+repeat = 3
+config = EventPrior
+end
+
+begin
+prog = xine
+button = GO
+repeat = 3
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = RED
+repeat = 3
+config = Quit
+end
+
+begin
+prog = xine
+button = RED
+repeat = 3
+config = Quit
+end
\ No newline at end of file
diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg
new file mode 100644
index 0000000..a1fbc6e
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap
new file mode 100644
index 0000000..8e453b9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap
@@ -0,0 +1,69 @@
+#
+# this config file was automatically generated
+# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
+#
+# contributed by Christoph Bartelmus
+#
+# brand: Streamzap
+# model no. of remote control: PC Remote
+# devices being controlled by this remote: USB receiver
+#
+
+begin remote
+
+ name Streamzap_PC_Remote
+ bits 6
+ flags RC5|CONST_LENGTH
+ eps 30
+ aeps 100
+
+ one 889 889
+ zero 889 889
+ plead 889
+ pre_data_bits 8
+ pre_data 0xA3
+ gap 108344
+ toggle_bit 2
+
+
+ begin codes
+ 0 0x00
+ 1 0x01
+ 2 0x02
+ 3 0x03
+ 4 0x04
+ 5 0x05
+ 6 0x06
+ 7 0x07
+ 8 0x08
+ 9 0x09
+ POWER 0x0A
+ MUTE 0x0B
+ CH_UP 0x0C
+ VOL_UP 0x0D
+ CH_DOWN 0x0E
+ VOL_DOWN 0x0F
+ UP 0x10
+ LEFT 0x11
+ OK 0x12
+ RIGHT 0x13
+ DOWN 0x14
+ MENU 0x15
+ EXIT 0x16
+ PLAY 0x17
+ PAUSE 0x18
+ STOP 0x19
+ |<< 0x1A
+ >>| 0x1B
+ RECORD 0x1C
+ << 0x1D
+ >> 0x1E
+ RED 0x20
+ GREEN 0x21
+ YELLOW 0x22
+ BLUE 0x23
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc
new file mode 100755
index 0000000..5e668b5
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc
@@ -0,0 +1,832 @@
+# StreamZap Remote
+# 'config' must either be a literal key, e.g. 'config = l' or must
+# refer to a defined key in MythTV, e.g. 'config = PLAY'a
+
+
+#restart frontend
+begin
+ remote = RS_LD
+ button = RESET
+ prog = irexec
+ repeat = 0
+ config = /usr/bin/restartfrontend.sh
+end
+
+#time
+begin
+ remote = RS_LD
+ button = TIME
+ prog = irexec
+ repeat = 10
+ config = /usr/bin/saytime.sh
+end
+
+#screen blank
+begin
+ remote = RS_LD
+ button = BLANK
+ prog = irexec
+ repeat = 0
+# config = ls
+ config = xset s activate ; xset s blank
+end
+
+
+#picture
+begin
+REMOTE = RS_LD
+prog = mythtv
+button = PICTURE
+repeat = 4
+config = f
+end
+
+#change aspect
+begin
+remote = RS_LD
+prog = mythtv
+button = ASPECT
+# change aspect ratio
+config = w
+end
+
+#Browse
+begin
+remote = RS_LD
+prog = mythtv
+button = BROWSE
+repeat = 8
+config = o
+end
+
+# delete key
+begin
+remote = RS_LD
+prog = mythtv
+button = DELETE
+repeat = 8
+config = d
+end
+
+
+#change card
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD
+repeat = 8
+config = y
+end
+
+# Change TV card input
+begin
+remote = RS_LD
+prog = mythtv
+button = CARD_SOURCE
+repeat = 4
+config = C
+end
+
+
+
+# Cycle through channel history
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = BLUE
+repeat = 4
+config = H
+end
+
+# Bring up OSD info
+begin
+remote = Streamzap_PC_Remote
+prog = mythtv
+button = YELLOW
+repeat = 4
+config = i
+end
+
+
+
+
+begin
+prog = mythtv
+button = 0
+config = 0
+end
+
+begin
+prog = mythtv
+button = 1
+config = 1
+end
+
+begin
+prog = mythtv
+button = 2
+config = 2
+end
+
+begin
+prog = mythtv
+button = 3
+config = 3
+end
+
+begin
+prog = mythtv
+button = 4
+config = 4
+end
+
+begin
+prog = mythtv
+button = 5
+config = 5
+end
+
+begin
+prog = mythtv
+button = 6
+config = 6
+end
+
+begin
+prog = mythtv
+button = 7
+config = 7
+end
+
+begin
+prog = mythtv
+button = 8
+config = 8
+end
+
+begin
+prog = mythtv
+button = 9
+config = 9
+end
+
+begin
+prog = mythtv
+button = POWER
+config = Esc
+end
+
+# ???
+begin
+prog = mythtv
+button = MUTE
+config = F9
+end
+
+begin
+prog = mythtv
+button = CH_UP
+repeat = 3
+config = PgUp
+end
+
+begin
+prog = mythtv
+button = VOL_UP
+repeat = 3
+config = ]
+end
+
+begin
+prog = mythtv
+button = CH_DOWN
+repeat = 3
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = VOL_DOWN
+repeat = 3
+config = [
+end
+
+begin
+prog = mythtv
+button = UP
+repeat = 3
+config = Up
+end
+
+begin
+prog = mythtv
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = Left
+end
+
+begin
+prog = mythtv
+button = OK
+config = Return
+end
+
+begin
+prog = mythtv
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = Right
+end
+
+begin
+prog = mythtv
+button = DOWN
+repeat = 3
+config = Down
+end
+
+begin
+prog = mythtv
+button = MENU
+config = m
+end
+
+begin
+prog = mythtv
+button = EXIT
+config = Esc
+end
+
+begin
+prog = mythtv
+button = PLAY
+config = Space
+end
+
+begin
+prog = mythtv
+button = PAUSE
+config = p
+end
+
+begin
+prog = mythtv
+button = STOP
+config = Esc
+end
+
+begin
+prog = mythtv
+# skip backward
+button = |<<
+config = PgUp
+end
+
+begin
+prog = mythtv
+# skip forward
+button = >>|
+config = PgDown
+end
+
+begin
+prog = mythtv
+button = RECORD
+config = r
+end
+
+begin
+prog = mythtv
+# rewind
+button = <<
+config = Home
+end
+
+begin
+prog = mythtv
+# fast forward
+button = >>
+config = End
+end
+
+begin
+prog = mythtv
+button = RED
+# Delete
+config = d
+end
+
+begin
+prog = mythtv
+button = GREEN
+# Info
+config = i
+end
+
+#begin
+#prog = mythtv
+#button = YELLOW
+# change aspect ratio
+#config = w
+#end
+
+begin
+prog = mythtv
+button = BLUE
+config = Tab
+end
+
+# MPLAYER
+begin
+prog = mplayer
+button = POWER
+config = quit
+end
+
+begin
+prog = mplayer
+button = MUTE
+config = mute
+end
+
+begin
+prog = mplayer
+button = VOL_UP
+repeat = 3
+config = volume +1
+end
+
+begin
+prog = mplayer
+button = VOL_DOWN
+repeat = 3
+config = volume -1
+end
+
+begin
+prog = mplayer
+button = UP
+repeat = 3
+config = seek +10
+end
+
+begin
+prog = mplayer
+button = LEFT
+# navigates, or skips back during playback or live tv.
+config = seek -60
+end
+
+begin
+prog = mplayer
+button = RIGHT
+# navigates, or skips forwards during playback or live tv.
+config = seek +60
+end
+
+begin
+prog = mplayer
+button = DOWN
+repeat = 3
+config = seek -10
+end
+
+begin
+prog = mplayer
+button = EXIT
+config = quit
+end
+
+begin
+prog = mplayer
+button = play
+config = speed_set 1.0
+end
+
+begin
+ prog = mplayer
+ button = pause
+ config = pause
+end
+
+begin
+prog = mplayer
+button = STOP
+config = quit
+end
+
+begin
+prog = mplayer
+# skip backward
+button = |<<
+config = seek -600
+end
+
+begin
+prog = mplayer
+# skip forward
+button = >>|
+config = seek +600
+end
+
+begin
+prog = mplayer
+# slow forward
+button = <<
+config = speed_mult 0.5
+end
+
+begin
+prog = mplayer
+# fast forward
+button = >>
+config = speed_mult 2.0
+end
+
+### xine commands
+
+begin
+prog = xine
+button = YELLOW
+repeat = 4
+#config = ToggleVisiblity
+config = OSDStreamInfos
+end
+
+begin
+prog = xine
+button = MENU
+repeat = 4
+config = SeekRelative+60
+end
+
+# increase brightness by 10
+begin
+ button = DELETE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl+
+end
+
+# decrease brightness by 10
+begin
+ button = PICTURE
+ prog = xine
+ repeat = 4
+ config = BrightnessControl-
+end
+
+
+begin
+prog = xine
+button = PAUSE
+repeat = 4
+config = Pause
+end
+
+begin
+prog = xine
+button = PLAY
+repeat = 4
+config = Play
+end
+
+begin
+prog = xine
+button = STOP
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = MUTE
+repeat = 4
+config = mute
+end
+
+begin
+prog = xine
+button = <<
+repeat = 4
+config = SeekRelative-30
+end
+
+begin
+prog = xine
+button = >>
+repeat = 4
+#config = SeekRelative+30
+config = SpeedFaster
+end
+
+begin
+prog = xine
+button = POWER
+repeat = 4
+config = quit
+end
+
+begin
+prog = xine
+button = EXIT
+repeat = 4
+config = quit
+end
+
+
+begin
+prog = xine
+button = FREEZE
+repeat = 4
+config = SeekRelative+1200
+end
+
+begin
+prog = xine
+button = MOVE
+repeat = 4
+config = SeekRelative-1200
+end
+
+begin
+prog = xine
+button = 3
+config = SpuNext
+repeat = 0
+end
+
+# Select previous sub picture (subtitle) channel.
+begin
+button = 1
+prog = xine
+repeat = 0
+config = SpuPrior
+end
+
+# Select next audio channel.
+begin
+button = 9
+prog = xine
+repeat = 0
+config = AudioChannelNext
+end
+
+# Select previous audio channel.
+begin
+button = 7
+prog = xine
+repeat = 0
+config = AudioChannelPrior
+end
+
+
+
+# Up event.
+begin
+
+button = UP
+prog = xine
+repeat = 8
+config = EventUp
+end
+
+# Down event.
+begin
+
+button = DOWN
+prog = xine
+repeat = 8
+config = EventDown
+end
+
+# Left event.
+begin
+
+button = LEFT
+prog = xine
+repeat = 8
+config = EventLeft
+end
+
+# Right event.
+begin
+
+button = RIGHT
+prog = xine
+repeat = 8
+config = EventRight
+end
+
+# Select event.
+begin
+prog = xine
+button = ok
+repeat = 8
+config = EventSelect
+end
+
+# Down Chapter
+begin
+
+button = CH_DOWN
+prog = xine
+repeat = 8
+config = EventPrior
+end
+
+# Next Chapter.
+begin
+
+button = CH_UP
+prog = xine
+repeat = 8
+config = EventNext
+end
+
+# menu.
+begin
+
+button = record
+prog = xine
+repeat = 8
+config = RootMenu
+end
+
+# Toggle aspect ratio
+begin
+prog = xine
+button = ASPECT
+repeat = 0
+config = ToggleAspectRatio
+end
+
+
+
+#######xmms
+begin xmms
+ begin
+ prog = xmms
+ button = PLAY
+ config = PLAY
+ end
+ begin
+ prog = xmms
+ button = clear
+ config = PLAYLIST_CLEAR
+ end
+ begin
+ prog = xmms
+ button = load
+ config = PLAYLIST_ADD .xmms/xmms.m3u
+ end
+ begin
+ prog = xmms
+ button = PAUSE
+ config = PAUSE
+ end
+ begin
+ prog = xmms
+ button = STOP
+ config = STOP
+ end
+ begin
+ prog = xmms
+ button = EXIT
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = POWER
+ config = QUIT
+ flags = mode
+ end
+
+ begin
+ prog = xmms
+ button = CH_UP
+ config = NEXT
+ end
+ begin
+ prog = xmms
+ button = CH_DOWN
+ config = PREV
+ end
+
+
+
+begin
+ prog = xmms
+ button = >>|
+ config = NEXT
+ end
+begin
+ prog = xmms
+ button = |<<
+ config = PREV
+end
+
+
+begin
+ prog = xmms
+ button = <<
+ config = FWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = <<
+ config = BWD 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = volup
+ config = VOL_UP 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = voldown
+ config = VOL_DOWN 10
+ repeat = 2
+ end
+ begin
+ prog = xmms
+ button = 1
+ config = ONE
+ end
+ begin
+ prog = xmms
+ button = 2
+ config = TWO
+ end
+ begin
+ prog = xmms
+ button = 3
+ config = THREE
+ end
+ begin
+ prog = xmms
+ button = 4
+ config = FOUR
+ end
+ begin
+ prog = xmms
+ button = 5
+ config = FIVE
+ end
+ begin
+ prog = xmms
+ button = 6
+ config = SIX
+ end
+ begin
+ prog = xmms
+ button = 7
+ config = SEVEN
+ end
+ begin
+ prog = xmms
+ button = 8
+ config = EIGHT
+ end
+ begin
+ prog = xmms
+ button = 9
+ config = NINE
+ end
+ begin
+ prog = xmms
+ button = 0
+ config = ZERO
+ end
+ begin
+ prog = xmms
+ button = enter
+ config = SETPOS
+ end
+end xmms
+
+#
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg
new file mode 100644
index 0000000..4d1a5fe
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI
new file mode 100644
index 0000000..6dd84f9
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI
@@ -0,0 +1,42 @@
+#
+# this config file was automatically generated
+# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000
+#
+# contributed by Peter Schlaf
+#
+# brand: Technisat
+# model:
+# supported devices: MediaFocus PC card
+#
+
+begin remote
+
+ name TECHNISAT
+ bits 10
+ flags SPACE_ENC|CONST_LENGTH
+ eps 20
+ aeps 150
+
+ one 141 7590
+ zero 141 5090
+ ptrail 141
+ pre_data_bits 1
+ pre_data 0x1
+ gap 121440
+ repeat_bit 0
+ toggle_bit 2
+
+ frequency 38000
+ duty_cycle 33
+
+ begin codes
+ MUTE 0x0000000000000046
+ VOL+ 0x000000000000006E
+ VOL- 0x000000000000006F
+ CH+ 0x0000000000000047
+ CH- 0x0000000000000048
+ end codes
+
+end remote
+
+
diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230
new file mode 100644
index 0000000..9562f60
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230
@@ -0,0 +1,48 @@
+#
+# This is for the remote that Tekram bundles with its M230 card (Mach64)
+# Commands from the remote are hardware-decoded
+#
+# contributed by Froenchenko Leonid <lfroen@galileo.co.il>
+#
+# brand: Tekram M230 (ATI Mach64)
+# supported devices: This remote control comes with TV Tuner cards from
+# Tekram based on ATI 264VT (btt829)
+#
+
+begin remote
+ name M230
+ bits 8
+ begin codes
+ 0 0x00
+ 1 0x01
+ 2 0x02
+ 3 0x03
+ 4 0x04
+ 5 0x05
+ 6 0x06
+ 7 0x07
+ 8 0x08
+ 9 0x09
+ RECALL 0x0A
+ ENTER 0x17
+ POWER 0x1C
+ SOURCE 0x15
+ PC_VID 0x12
+ STILL 0x11
+ TTX 0x0F
+ FAV 0x13
+ MUTE 0x10
+ VOL_UP 0x1A
+ VOL_DN 0x1E
+ CH_UP 0x1B
+ CH_DN 0x1F
+ PLAY 0x0D
+ STOP 0x0E
+ REW 0x1D
+ FFW 0x19
+ ADD_ER 0x16
+ FUNC 0x14
+ F_PLUS 0x18
+ F_MINUS 0x0C
+ end codes
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230
new file mode 100644
index 0000000..0bacf5d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230
@@ -0,0 +1,33 @@
+#
+# lircmd config file for Tekram remote control
+# Contributed by Froenchenko Leonid <lfroen@galileo.co.il>
+#
+
+PROTOCOL IntelliMouse
+
+# ACCELERATOR start max multiplier
+
+#ACCELERATOR 2 30 5
+
+ACTIVATE * MOUSE_MODE
+
+MOVE_N * 2
+MOVE_NE * 3
+MOVE_E * 6
+MOVE_SE * 9
+MOVE_S * 8
+MOVE_SW * 7
+MOVE_W * 4
+MOVE_NW * 1
+
+# These are lircmd-0.5.5 extensions
+MOVE_IN * VOL_UP
+MOVE_OUT * VOL_DN
+
+BUTTON1_CLICK * RECALL
+BUTTON2_CLICK * 0
+BUTTON3_CLICK * ENTER
+
+BUTTON1_TOGGLE * PLAY
+BUTTON2_TOGGLE * STOP
+BUTTON3_TOGGLE * REW
diff --git a/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg
new file mode 100644
index 0000000..a034186
Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg differ
diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote
new file mode 100644
index 0000000..73df340
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote
@@ -0,0 +1,116 @@
+#
+#
+# contributed by Isaac Lauer
+# modified by Shawn Nycz
+# modified by Brian Craft
+#
+# brand: X10
+# model: MP3 MouseRemote, Model mk19a
+#
+
+begin remote
+
+ name mouseremote
+ bits 16
+ eps 30
+ aeps 100
+ one 0 0
+ zero 0 0
+ pre_data_bits 8
+ pre_data 0x08
+ post_data_bits 8
+ post_data 0x7f
+ min_repeat 2
+ gap 140000
+
+ begin codes
+ POWER 0x000000000000000F
+ PC 0x000000000000002B
+ LAST 0x000000000000004F
+ CHANUP 0x0000000000000002
+ CHANDOWN 0x0000000000000003
+ VOLUP 0x0000000000000006
+ VOLDOWN 0x0000000000000007
+ MUTE 0x0000000000000005
+ 1 0x0000000000000041
+ 2 0x0000000000000042
+ 3 0x0000000000000043
+ 4 0x0000000000000044
+ 5 0x0000000000000045
+ 6 0x0000000000000046
+ 7 0x0000000000000047
+ 8 0x0000000000000048
+ 9 0x0000000000000049
+ 0 0x0000000000000040
+ ENTER 0x000000000000004a
+ ADOTB 0x000000000000005D
+ REWIND 0x000000000000001C
+ PLAY 0x000000000000000D
+ FFWD 0x000000000000001D
+ STOP 0x000000000000000E
+ PAUSE 0x000000000000004E
+ RECORD 0x00000000000000FF
+ ENTER 0x000000000000004A
+ LAST 0x000000000000004F
+ DISP 0x000000000000005C
+ SHIFT 0x000000000000006B
+ GUIDE 0x000000000000006D
+ SELECT 0x0000000000000093
+ PHONE 0x000000000000004B
+ WEB 0x000000000000008B
+ CD 0x00000000000000AB
+ DVD 0x00000000000000CB
+ MOUSE_SLOW_N 0x0000000000000110
+ MOUSE_SLOW_NNE 0x0000000000000131
+ MOUSE_SLOW_NE 0x0000000000000111
+ MOUSE_SLOW_ENE 0x0000000000000113
+ MOUSE_SLOW_E 0x0000000000000101
+ MOUSE_SLOW_ESE 0x0000000000000193
+ MOUSE_SLOW_SE 0x0000000000000191
+ MOUSE_SLOW_SSE 0x00000000000001B1
+ MOUSE_SLOW_S 0x0000000000000190
+ MOUSE_SLOW_SSW 0x00000000000001B9
+ MOUSE_SLOW_SW 0x0000000000000199
+ MOUSE_SLOW_WSW 0x000000000000019B
+ MOUSE_SLOW_W 0x0000000000000109
+ MOUSE_SLOW_WNW 0x000000000000011B
+ MOUSE_SLOW_NW 0x0000000000000119
+ MOUSE_SLOW_NNW 0x0000000000000139
+ MOUSE_MEDIUM_N 0x0000000000000310
+ MOUSE_MEDIUM_NNE 0x0000000000000331
+ MOUSE_MEDIUM_NE 0x0000000000000311
+ MOUSE_MEDIUM_ENE 0x0000000000000313
+ MOUSE_MEDIUM_E 0x0000000000000301
+ MOUSE_MEDIUM_ESE 0x0000000000000393
+ MOUSE_MEDIUM_SE 0x0000000000000391
+ MOUSE_MEDIUM_SSE 0x00000000000003B1
+ MOUSE_MEDIUM_S 0x0000000000000390
+ MOUSE_MEDIUM_SSW 0x00000000000003B9
+ MOUSE_MEDIUM_SW 0x0000000000000399
+ MOUSE_MEDIUM_WSW 0x000000000000039B
+ MOUSE_MEDIUM_W 0x0000000000000309
+ MOUSE_MEDIUM_WNW 0x000000000000031B
+ MOUSE_MEDIUM_NW 0x0000000000000319
+ MOUSE_MEDIUM_NNW 0x0000000000000339
+ MOUSE_FAST_N 0x0000000000000510
+ MOUSE_FAST_NNE 0x0000000000000531
+ MOUSE_FAST_NE 0x0000000000000511
+ MOUSE_FAST_ENE 0x0000000000000513
+ MOUSE_FAST_E 0x0000000000000501
+ MOUSE_FAST_ESE 0x0000000000000593
+ MOUSE_FAST_SE 0x0000000000000591
+ MOUSE_FAST_SSE 0x00000000000005B1
+ MOUSE_FAST_S 0x0000000000000590
+ MOUSE_FAST_SSW 0x00000000000005B9
+ MOUSE_FAST_SW 0x0000000000000599
+ MOUSE_FAST_WSW 0x000000000000059B
+ MOUSE_FAST_W 0x0000000000000509
+ MOUSE_FAST_WNW 0x000000000000051B
+ MOUSE_FAST_NW 0x0000000000000519
+ MOUSE_FAST_NNW 0x0000000000000539
+ BUTTONR_DOWN 0x0000000000000801
+ BUTTONL_DOWN 0x0000000000000804
+ BUTTON_UP 0x0000000000000800
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere
new file mode 100644
index 0000000..c9bb727
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere
@@ -0,0 +1,64 @@
+#
+#
+# contributed by Isaac Lauer
+# modified by Shawn Nycz
+#
+# brand: X10
+# model: MP3 Anywhere Remote, Model UR81A
+# supported devices: at least FireCracker Receiver Model MR26A, maybe more
+#
+
+begin remote
+
+ name mp3anywhere
+ bits 8
+ eps 30
+ aeps 100
+ one 0 0
+ zero 0 0
+ pre_data_bits 24
+ pre_data 0xD5AAEE
+ min_repeat 2
+ gap 140000
+
+ begin codes
+ POWER 0x00000000000000F0
+ PC 0x00000000000000D4
+ LAST 0x00000000000000F2
+ CHANUP 0x0000000000000040
+ CHANDOWN 0x00000000000000C0
+ VOLUP 0x0000000000000060
+ VOLDOWN 0x00000000000000E0
+ MUTE 0x00000000000000A0
+ ONE 0x0000000000000082
+ TWO 0x0000000000000042
+ THREE 0x00000000000000C2
+ FOUR 0x0000000000000022
+ FIVE 0x00000000000000A2
+ SIX 0x0000000000000062
+ SEVEN 0x00000000000000E2
+ EIGHT 0x0000000000000012
+ NINE 0x0000000000000092
+ ZERO 0x0000000000000002
+ ENTER 0x0000000000000052
+ ADOTB 0x00000000000000BA
+ A 0x000000000000003A
+ B 0x00000000000000D8
+ C 0x00000000000000D6
+ D 0x00000000000000D4
+ MENU 0x00000000000000B6
+ EXIT 0x00000000000000C9
+ UP 0x00000000000000D5
+ DOWN 0x00000000000000D3
+ LEFT 0x00000000000000D2
+ RIGHT 0x00000000000000D1
+ OK 0x0000000000000052
+ REWIND 0x0000000000000038
+ PLAY 0x00000000000000B0
+ FFWD 0x00000000000000B8
+ RECORD 0x00000000000000FF
+ STOP 0x0000000000000070
+ PAUSE 0x0000000000000072
+ end codes
+
+end remote
diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote
new file mode 100644
index 0000000..c3c23b1
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote
@@ -0,0 +1,288 @@
+#
+# lircmd config file for the mouseremote control
+#
+
+# ACCELERATOR start max multiplier
+
+ACCELERATOR 1 3 2
+
+#ACTIVATE * MENU
+
+
+MOVE_N mouseremote MOUSE_SLOW_N
+MOVE_N mouseremote MOUSE_SLOW_N
+
+MOVE_N mouseremote MOUSE_MEDIUM_N
+MOVE_N mouseremote MOUSE_MEDIUM_N
+MOVE_N mouseremote MOUSE_MEDIUM_N
+MOVE_N mouseremote MOUSE_MEDIUM_N
+
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+MOVE_N mouseremote MOUSE_FAST_N
+
+MOVE_N mouseremote MOUSE_SLOW_NNE
+MOVE_NE mouseremote MOUSE_SLOW_NNE
+
+MOVE_N mouseremote MOUSE_MEDIUM_NNE
+MOVE_NE mouseremote MOUSE_MEDIUM_NNE
+MOVE_N mouseremote MOUSE_MEDIUM_NNE
+MOVE_NE mouseremote MOUSE_MEDIUM_NNE
+
+MOVE_N mouseremote MOUSE_FAST_NNE
+MOVE_NE mouseremote MOUSE_FAST_NNE
+MOVE_N mouseremote MOUSE_FAST_NNE
+MOVE_NE mouseremote MOUSE_FAST_NNE
+MOVE_N mouseremote MOUSE_FAST_NNE
+MOVE_NE mouseremote MOUSE_FAST_NNE
+MOVE_N mouseremote MOUSE_FAST_NNE
+MOVE_NE mouseremote MOUSE_FAST_NNE
+
+MOVE_NE mouseremote MOUSE_SLOW_NE
+MOVE_NE mouseremote MOUSE_SLOW_NE
+
+MOVE_NE mouseremote MOUSE_MEDIUM_NE
+MOVE_NE mouseremote MOUSE_MEDIUM_NE
+MOVE_NE mouseremote MOUSE_MEDIUM_NE
+MOVE_NE mouseremote MOUSE_MEDIUM_NE
+
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+MOVE_NE mouseremote MOUSE_FAST_NE
+
+MOVE_E mouseremote MOUSE_SLOW_ENE
+MOVE_NE mouseremote MOUSE_SLOW_ENE
+
+MOVE_E mouseremote MOUSE_MEDIUM_ENE
+MOVE_NE mouseremote MOUSE_MEDIUM_ENE
+MOVE_E mouseremote MOUSE_MEDIUM_ENE
+MOVE_NE mouseremote MOUSE_MEDIUM_ENE
+
+MOVE_E mouseremote MOUSE_FAST_ENE
+MOVE_NE mouseremote MOUSE_FAST_ENE
+MOVE_E mouseremote MOUSE_FAST_ENE
+MOVE_NE mouseremote MOUSE_FAST_ENE
+MOVE_E mouseremote MOUSE_FAST_ENE
+MOVE_NE mouseremote MOUSE_FAST_ENE
+MOVE_E mouseremote MOUSE_FAST_ENE
+MOVE_NE mouseremote MOUSE_FAST_ENE
+
+MOVE_E mouseremote MOUSE_SLOW_E
+MOVE_E mouseremote MOUSE_SLOW_E
+
+MOVE_E mouseremote MOUSE_MEDIUM_E
+MOVE_E mouseremote MOUSE_MEDIUM_E
+MOVE_E mouseremote MOUSE_MEDIUM_E
+MOVE_E mouseremote MOUSE_MEDIUM_E
+
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+MOVE_E mouseremote MOUSE_FAST_E
+
+MOVE_E mouseremote MOUSE_SLOW_ESE
+MOVE_SE mouseremote MOUSE_SLOW_ESE
+
+MOVE_E mouseremote MOUSE_MEDIUM_ESE
+MOVE_SE mouseremote MOUSE_MEDIUM_ESE
+MOVE_E mouseremote MOUSE_MEDIUM_ESE
+MOVE_SE mouseremote MOUSE_MEDIUM_ESE
+
+MOVE_E mouseremote MOUSE_FAST_ESE
+MOVE_SE mouseremote MOUSE_FAST_ESE
+MOVE_E mouseremote MOUSE_FAST_ESE
+MOVE_SE mouseremote MOUSE_FAST_ESE
+MOVE_E mouseremote MOUSE_FAST_ESE
+MOVE_SE mouseremote MOUSE_FAST_ESE
+MOVE_E mouseremote MOUSE_FAST_ESE
+MOVE_SE mouseremote MOUSE_FAST_ESE
+
+MOVE_SE mouseremote MOUSE_SLOW_SE
+MOVE_SE mouseremote MOUSE_SLOW_SE
+
+MOVE_SE mouseremote MOUSE_MEDIUM_SE
+MOVE_SE mouseremote MOUSE_MEDIUM_SE
+MOVE_SE mouseremote MOUSE_MEDIUM_SE
+MOVE_SE mouseremote MOUSE_MEDIUM_SE
+
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+MOVE_SE mouseremote MOUSE_FAST_SE
+
+MOVE_S mouseremote MOUSE_SLOW_SSE
+MOVE_SE mouseremote MOUSE_SLOW_SSE
+
+MOVE_S mouseremote MOUSE_MEDIUM_SSE
+MOVE_SE mouseremote MOUSE_MEDIUM_SSE
+MOVE_S mouseremote MOUSE_MEDIUM_SSE
+MOVE_SE mouseremote MOUSE_MEDIUM_SSE
+
+MOVE_S mouseremote MOUSE_FAST_SSE
+MOVE_SE mouseremote MOUSE_FAST_SSE
+MOVE_S mouseremote MOUSE_FAST_SSE
+MOVE_SE mouseremote MOUSE_FAST_SSE
+MOVE_S mouseremote MOUSE_FAST_SSE
+MOVE_SE mouseremote MOUSE_FAST_SSE
+MOVE_S mouseremote MOUSE_FAST_SSE
+MOVE_SE mouseremote MOUSE_FAST_SSE
+
+MOVE_S mouseremote MOUSE_SLOW_S
+MOVE_S mouseremote MOUSE_SLOW_S
+
+MOVE_S mouseremote MOUSE_MEDIUM_S
+MOVE_S mouseremote MOUSE_MEDIUM_S
+MOVE_S mouseremote MOUSE_MEDIUM_S
+MOVE_S mouseremote MOUSE_MEDIUM_S
+
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+MOVE_S mouseremote MOUSE_FAST_S
+
+MOVE_S mouseremote MOUSE_SLOW_SSW
+MOVE_SW mouseremote MOUSE_SLOW_SSW
+
+MOVE_S mouseremote MOUSE_MEDIUM_SSW
+MOVE_SW mouseremote MOUSE_MEDIUM_SSW
+MOVE_S mouseremote MOUSE_MEDIUM_SSW
+MOVE_SW mouseremote MOUSE_MEDIUM_SSW
+
+MOVE_S mouseremote MOUSE_FAST_SSW
+MOVE_SW mouseremote MOUSE_FAST_SSW
+MOVE_S mouseremote MOUSE_FAST_SSW
+MOVE_SW mouseremote MOUSE_FAST_SSW
+MOVE_S mouseremote MOUSE_FAST_SSW
+MOVE_SW mouseremote MOUSE_FAST_SSW
+MOVE_S mouseremote MOUSE_FAST_SSW
+MOVE_SW mouseremote MOUSE_FAST_SSW
+
+MOVE_SW mouseremote MOUSE_SLOW_SW
+MOVE_SW mouseremote MOUSE_SLOW_SW
+
+MOVE_SW mouseremote MOUSE_MEDIUM_SW
+MOVE_SW mouseremote MOUSE_MEDIUM_SW
+MOVE_SW mouseremote MOUSE_MEDIUM_SW
+MOVE_SW mouseremote MOUSE_MEDIUM_SW
+
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+MOVE_SW mouseremote MOUSE_FAST_SW
+
+MOVE_W mouseremote MOUSE_SLOW_WSW
+MOVE_SW mouseremote MOUSE_SLOW_WSW
+
+MOVE_W mouseremote MOUSE_MEDIUM_WSW
+MOVE_SW mouseremote MOUSE_MEDIUM_WSW
+MOVE_W mouseremote MOUSE_MEDIUM_WSW
+MOVE_SW mouseremote MOUSE_MEDIUM_WSW
+
+MOVE_W mouseremote MOUSE_FAST_WSW
+MOVE_SW mouseremote MOUSE_FAST_WSW
+MOVE_W mouseremote MOUSE_FAST_WSW
+MOVE_SW mouseremote MOUSE_FAST_WSW
+MOVE_W mouseremote MOUSE_FAST_WSW
+MOVE_SW mouseremote MOUSE_FAST_WSW
+MOVE_W mouseremote MOUSE_FAST_WSW
+MOVE_SW mouseremote MOUSE_FAST_WSW
+
+MOVE_W mouseremote MOUSE_SLOW_W
+MOVE_W mouseremote MOUSE_SLOW_W
+
+MOVE_W mouseremote MOUSE_MEDIUM_W
+MOVE_W mouseremote MOUSE_MEDIUM_W
+MOVE_W mouseremote MOUSE_MEDIUM_W
+MOVE_W mouseremote MOUSE_MEDIUM_W
+
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+MOVE_W mouseremote MOUSE_FAST_W
+
+MOVE_W mouseremote MOUSE_SLOW_WNW
+MOVE_NW mouseremote MOUSE_SLOW_WNW
+
+MOVE_W mouseremote MOUSE_MEDIUM_WNW
+MOVE_NW mouseremote MOUSE_MEDIUM_WNW
+MOVE_W mouseremote MOUSE_MEDIUM_WNW
+MOVE_NW mouseremote MOUSE_MEDIUM_WNW
+
+MOVE_W mouseremote MOUSE_FAST_WNW
+MOVE_NW mouseremote MOUSE_FAST_WNW
+MOVE_W mouseremote MOUSE_FAST_WNW
+MOVE_NW mouseremote MOUSE_FAST_WNW
+MOVE_W mouseremote MOUSE_FAST_WNW
+MOVE_NW mouseremote MOUSE_FAST_WNW
+MOVE_W mouseremote MOUSE_FAST_WNW
+MOVE_NW mouseremote MOUSE_FAST_WNW
+
+MOVE_NW mouseremote MOUSE_SLOW_NW
+MOVE_NW mouseremote MOUSE_SLOW_NW
+
+MOVE_NW mouseremote MOUSE_MEDIUM_NW
+MOVE_NW mouseremote MOUSE_MEDIUM_NW
+MOVE_NW mouseremote MOUSE_MEDIUM_NW
+MOVE_NW mouseremote MOUSE_MEDIUM_NW
+
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+MOVE_NW mouseremote MOUSE_FAST_NW
+
+MOVE_N mouseremote MOUSE_SLOW_NNW
+MOVE_NW mouseremote MOUSE_SLOW_NNW
+
+MOVE_N mouseremote MOUSE_MEDIUM_NNW
+MOVE_NW mouseremote MOUSE_MEDIUM_NNW
+MOVE_N mouseremote MOUSE_MEDIUM_NNW
+MOVE_NW mouseremote MOUSE_MEDIUM_NNW
+
+MOVE_N mouseremote MOUSE_FAST_NNW
+MOVE_NW mouseremote MOUSE_FAST_NNW
+MOVE_N mouseremote MOUSE_FAST_NNW
+MOVE_NW mouseremote MOUSE_FAST_NNW
+MOVE_N mouseremote MOUSE_FAST_NNW
+MOVE_NW mouseremote MOUSE_FAST_NNW
+MOVE_N mouseremote MOUSE_FAST_NNW
+MOVE_NW mouseremote MOUSE_FAST_NNW
+
+BUTTON1_DOWN mouseremote BUTTONL_DOWN
+BUTTON2_DOWN mouseremote BUTTONR_DOWN
+
+BUTTON1_UP mouseremote BUTTON_UP
+BUTTON2_UP mouseremote BUTTON_UP
diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.home b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home
new file mode 100755
index 0000000..b850a7d
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home
@@ -0,0 +1,10 @@
+[home]
+ path = /data/home/mythtv/
+ public = yes
+ only guest = yes
+ writeable = yes
+ printable = no
+ force user = mythtv
+ force group = mythtv
+ create mask = 0755
+
diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.media b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media
new file mode 100755
index 0000000..6a4ec91
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media
@@ -0,0 +1,10 @@
+[media]
+ path = /data/media
+ public = yes
+ only guest = yes
+ writeable = yes
+ printable = no
+ force user = mythtv
+ force group = mythtv
+ create mask = 0755
+
diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.template b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template
new file mode 100644
index 0000000..42ddb99
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template
@@ -0,0 +1,125 @@
+#
+#======================= Global Settings =====================================
+[global]
+
+ workgroup = home_lan
+ server string = MythVantage
+
+# Security mode. Defines in which mode Samba will operate. Possible
+# values are share, user, server, domain and ads. Most people will want
+# user level security. See the Samba-HOWTO-Collection for details.
+ security = share
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+; hosts allow = 192.168.1. 192.168.2. 127.
+
+ load printers = no
+
+# you may wish to override the location of the printcap file
+; printcap name = /etc/printcap
+
+; guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+ max log size = 50
+
+# Use password server option only with security = server
+# The argument list may include:
+# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
+# or to auto-locate the domain controller/s
+# password server = *
+; password server = <NT-Server-Name>
+
+# Use the realm option only with security = ads
+# Specifies the Active Directory realm the host is part of
+; realm = MY_REALM
+
+# Backend to store user information in. New installations should
+# use either tdbsam or ldapsam. smbpasswd is available for backwards
+# compatibility. tdbsam requires no further configuration.
+; passdb backend = tdbsam
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting.
+# Note: Consider carefully the location in the configuration file of
+# this line. The included file is read at that point.
+; include = /usr/local/samba/lib/smb.conf.%m
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+; interfaces = 192.168.12.2/24 192.168.13.2/24
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+; local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+; os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+; domain master = yes
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+; preferred master = yes
+
+# Enable this if you want Samba to be a domain logon server for
+# Windows95 workstations.
+; domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+; logon script = %m.bat
+# run a specific logon batch file per username
+; logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+# %L substitutes for this servers netbios name, %U is username
+# You must uncomment the [Profiles] share below
+; logon path = \\%L\Profiles\%U
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+; wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one WINS Server on the network. The default is NO.
+; wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The default is NO.
+ dns proxy = no
+
+# These scripts are used on a domain controller or stand-alone
+# machine to add or delete corresponding unix accounts
+; add user script = /usr/sbin/useradd %u
+; add group script = /usr/sbin/groupadd %g
+; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
+; delete user script = /usr/sbin/userdel %u
+; delete user from group script = /usr/sbin/deluser %u %g
+; delete group script = /usr/sbin/groupdel %g
+
+
+#============================ Share Definitions ==============================
+
+
diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt
new file mode 100644
index 0000000..f82f2d2
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt
@@ -0,0 +1,209 @@
+context action description keylist hostname
+Music FFWD Fast forward PgDown REPLACEME
+Music STOP Stop playback O REPLACEME
+Music MUTE Mute |,\\\\,F9 REPLACEME
+Gallery SCROLLUP Scroll image up 2 REPLACEME
+Music VOLUMEDOWN Volume down [,{,F10 REPLACEME
+Music VOLUMEUP Volume up ],},F11 REPLACEME
+qt DELETE Delete D REPLACEME
+Music RWND Rewind PgUp REPLACEME
+qt EDIT Edit E REPLACEME
+Music PAUSE Pause/Start playback P REPLACEME
+Gallery RECENTER Recenter image 5 REPLACEME
+Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME
+Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME
+Gallery SCROLLRIGHT Scroll image right 6 REPLACEME
+Gallery MENU Toggle activating menu in thumbnail view M REPLACEME
+Gallery SCROLLDOWN Scroll image down 8 REPLACEME
+Gallery ZOOMIN Zoom image in 9 REPLACEME
+Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME
+Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME
+Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME
+Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME
+Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME
+Gallery END Go to the last image in thumbnail view End REPLACEME
+Gallery HOME Go to the first image in thumbnail view Home REPLACEME
+Gallery SCROLLLEFT Scroll image left 4 REPLACEME
+Gallery PLAY Start/Stop Slideshow P REPLACEME
+NetFlix REMOVE Removes movie from queue D REPLACEME
+Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME
+Gallery ZOOMOUT Zoom image out 7 REPLACEME
+NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME
+Global DOWN Down Arrow Down REPLACEME
+ITV Menu MENUTEXT Menu Text F7 REPLACEME
+ITV Menu TEXTEXIT Menu Exit F6 REPLACEME
+Global LEFT Left Arrow Left REPLACEME
+Global RIGHT Right Arrow Right REPLACEME
+Global UP Up Arrow Up REPLACEME
+Global MENU Pop-up menu M REPLACEME
+Global PREVVIEW Previous View Home REPLACEME
+Global ESCAPE Escape Esc REPLACEME
+Global PAGEUP Page Up PgUp REPLACEME
+Global SELECT Select Return,Enter,Space REPLACEME
+Global HELP Help F1 REPLACEME
+Global INFO More information I REPLACEME
+Global NEXTVIEW Next View End REPLACEME
+ITV Menu MENUBLUE Menu Blue F5 REPLACEME
+Global PAGEDOWN Page Down PgDown REPLACEME
+Global EJECT Eject Removable Media REPLACEME
+Global 3 3 3 REPLACEME
+Global 1 1 1 REPLACEME
+Global 6 6 6 REPLACEME
+Global 0 0 0 REPLACEME
+Global 2 2 2 REPLACEME
+Global 4 4 4 REPLACEME
+TV Frontend DELETE Delete Program D REPLACEME
+Global 8 8 8 REPLACEME
+Global 7 7 7 REPLACEME
+TV Frontend PAGEDOWN Page Down 9 REPLACEME
+TV Frontend PAGEUP Page Up 3 REPLACEME
+Global 5 5 5 REPLACEME
+TV Frontend CHANGERECGROUP Change Recording Group REPLACEME
+Global 9 9 9 REPLACEME
+Video END Go to the last video End REPLACEME
+Video INCPARENT Increase Parental Level ],},F11 REPLACEME
+Weather PAUSE Pause current page P REPLACEME
+TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME
+Video BROWSE Change browsable in video manager B REPLACEME
+Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME
+Video HOME Go to the first video Home REPLACEME
+Video FILTER Open video filter dialog F REPLACEME
+Welcome STARTXTERM Open an Xterm window F12 REPLACEME
+Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
+Music BLANKSCR Blank screen 5 REPLACEME
+Video DELETE Delete video D REPLACEME
+Music THMBUP Increase rating 9 REPLACEME
+Music CYCLEVIS Cycle visualizer mode 6 REPLACEME
+Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME
+Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
+TV Frontend PLAYBACK Play Program P REPLACEME
+News FORCERETRIEVE Force update news items M REPLACEME
+Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME
+News RETRIEVENEWS Update news items I REPLACEME
+News CANCEL Cancel news item updating C REPLACEME
+Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME
+Teletext Menu MENUWHITE Menu White F6 REPLACEME
+ITV Menu MENURED Menu Red F2 REPLACEME
+ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME
+ITV Menu MENUGREEN Menu Green F3 REPLACEME
+Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME
+Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME
+Teletext Menu MENUGREEN Menu Green F3 REPLACEME
+Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME
+Teletext Menu MENUBLUE Menu Blue F5 REPLACEME
+Teletext Menu TOGGLETT Toggle Teletext T REPLACEME
+Teletext Menu NEXTPAGE Next Page Down REPLACEME
+TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME
+TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME
+TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME
+TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME
+Teletext Menu MENURED Menu Red F2 REPLACEME
+TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME
+Teletext Menu PREVPAGE Previous Page Up REPLACEME
+TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME
+TV Playback PLAY Play Ctrl+P REPLACEME
+TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME
+TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME
+TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME
+TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME
+TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME
+TV Playback FINDER Show the Program Finder # REPLACEME
+TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME
+TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME
+TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME
+TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME
+TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME
+TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME
+TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME
+TV Playback SPEEDINC Increase the playback speed U REPLACEME
+TV Playback STRETCHDEC Decrease time stretch speed REPLACEME
+TV Playback SPEEDDEC Decrease the playback speed J REPLACEME
+TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME
+TV Playback GUIDE Show the Program Guide S REPLACEME
+TV Playback JUMPPREV Jump to previously played recording REPLACEME
+TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME
+TV Playback STRETCHINC Increase time stretch speed REPLACEME
+TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME
+TV Playback PREVCC708 Previous ATSC CC track REPLACEME
+TV Playback NEXTCC708 Next ATSC CC track REPLACEME
+TV Playback NEXTCC Next of any captions REPLACEME
+TV Playback NEXTSCAN Next video scan overidemode REPLACEME
+TV Playback NEXTCC608 Next VBI CC track REPLACEME
+TV Playback PREVCC608 Previous VBI CC track REPLACEME
+TV Playback PREVAUDIO Previous audio track - REPLACEME
+TV Playback PREVSUBTITLE Previous subtitle track REPLACEME
+TV Playback NEXTSUBTITLE Next subtitle track REPLACEME
+TV Playback NEXTAUDIO Next audio track + REPLACEME
+TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME
+TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME
+TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME
+TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME
+TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME
+TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME
+TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME
+TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME
+TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME
+TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME
+TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME
+TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME
+TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME
+TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME
+TV Playback SWAPPIP Swap PiP/Main N REPLACEME
+TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME
+TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME
+TV Playback TOGGLECC608 Toggle VBI CC REPLACEME
+TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME
+TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
+TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME
+TV Playback MUTE Mute |,\\\\,F9 REPLACEME
+TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME
+TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME
+TV Playback VOLUMEUP Volume up ],},F11 REPLACEME
+TV Playback TOGGLECC Toggle any captions T REPLACEME
+TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME
+TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME
+TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME
+TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME
+TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME
+TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME
+TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME
+TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME
+TV Playback JUMPFFWD Jump ahead PgDown REPLACEME
+TV Playback PREVCHAN Switch to the previous channel H REPLACEME
+TV Playback JUMPBKMRK Jump to bookmark K REPLACEME
+TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME
+TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME
+TV Playback JUMPRWND Jump back PgUp REPLACEME
+TV Playback SEEKRWND Rewind Left REPLACEME
+TV Playback SEEKFFWD Fast Forward Right REPLACEME
+TV Playback CHANNELDOWN Channel down Down REPLACEME
+TV Playback CHANNELUP Channel up Up REPLACEME
+TV Playback ARBSEEK Arbitrary Seek * REPLACEME
+TV Playback DELETE Delete Program D REPLACEME
+TV Playback CLEAROSD Clear OSD Backspace REPLACEME
+TV Frontend DETAILS Show program details U REPLACEME
+TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME
+TV Frontend UPCOMING List upcoming episodes O REPLACEME
+TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME
+TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME
+TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME
+TV Playback PAUSE Pause P REPLACEME
+TV Frontend RANKINC Increase program or channel rank Right REPLACEME
+TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME
+TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME
+TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME
+Gallery DELETE Delete marked images or current image if none are marked D REPLACEME
+TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME
+Gallery MARK Mark image T REPLACEME
+Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME
+TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
+TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME
+Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME
+Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
+Music DELETE Delete track from playlist D REPLACEME
+Gallery INFO Toggle Showing Information about Image I REPLACEME
+Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
+Music REFRESH Refresh music tree 8 REPLACEME
+Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME
+Music FILTER Filter All My Music F REPLACEME
+Music THMBDOWN Decrease rating 7 REPLACEME
diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt
new file mode 100644
index 0000000..8c3a391
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt
@@ -0,0 +1,320 @@
+value data hostname
+AC3PassThru 0 REPLACEME
+AggressiveSoundcardBuffer 0 REPLACEME
+AllowQuitShutdown 3 REPLACEME
+AltClearSavedPosition 1 REPLACEME
+AspectOverride 0 REPLACEME
+AudioNag 1 REPLACEME
+AudioOutputDevice /dev/dsp REPLACEME
+AutoCommercialSkip 2 REPLACEME
+AutoLookupCD 1 REPLACEME
+AutomaticSetWatched 0 REPLACEME
+AutoPlayCD 0 REPLACEME
+BackendServerPort 6543 REPLACEME
+BackendStatusPort 6544 REPLACEME
+CCBackground 0 REPLACEME
+CDBlankType fast REPLACEME
+CDCreateDir 1 REPLACEME
+CDDevice /dev/cdrom REPLACEME
+CDDiskSize 1 REPLACEME
+CDWriterEnabled 0 REPLACEME
+CDWriteSpeed 0 REPLACEME
+ChannelFormat <num> <sign> REPLACEME
+ChannelOrdering channum REPLACEME
+chanPerPage 5 REPLACEME
+ClearSavedPosition 1 REPLACEME
+CommNotifyAmount 0 REPLACEME
+CommRewindAmount 0 REPLACEME
+CustomFilters REPLACEME
+DateFormat ddd MMM d REPLACEME
+DecodeExtraAudio 1 REPLACEME
+Default MythVideo View 1 REPLACEME
+DefaultCCMode 0 REPLACEME
+DefaultRipQuality 0 REPLACEME
+DefaultTVChannel 3 REPLACEME
+Deinterlace 1 REPLACEME
+DeinterlaceFilter kerneldeint REPLACEME
+DisplayGroupDefaultView 0 REPLACEME
+DisplayGroupTitleSort 0 REPLACEME
+DisplayRecGroup Default REPLACEME
+DispRecGroupAsAllProg 0 REPLACEME
+DTSPassThru 0 REPLACEME
+DVDDeviceLocation /dev/dvd REPLACEME
+DVDOnInsertDVD 1 REPLACEME
+DVDRipLocation /data/media/tmp REPLACEME
+EjectCDAfterRipping 1 REPLACEME
+EnableMHEG 0 REPLACEME
+EnableXbox 0 REPLACEME
+EnableXbox 0 REPLACEME
+EncoderType ogg REPLACEME
+EndOfRecordingExitPrompt 1 REPLACEME
+EPGFillType 10 REPLACEME
+EPGScrollType 1 REPLACEME
+EPGShowCategoryColors 1 REPLACEME
+EPGShowCategoryText 1 REPLACEME
+EPGShowChannelIcon 1 REPLACEME
+EPGShowFavorites 0 REPLACEME
+ExactSeeking 0 REPLACEME
+FFRewReposTime 100 REPLACEME
+FFRewReverse 1 REPLACEME
+FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME
+GalleryDir /data/media/images REPLACEME
+GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME
+GalleryMoviePlayerCmd mplayer -fs %s REPLACEME
+GalleryOverlayCaption 0 REPLACEME
+GalleryRecursiveSlideshow 1 REPLACEME
+GallerySortOrder 20 REPLACEME
+GalleryThumbnailLocation 1 REPLACEME
+GameAllTreeLevels system gamename REPLACEME
+GameFavTreeLevels gamename REPLACEME
+GeneratePreviewPixmaps 0 REPLACEME
+GuiHeight 0 REPLACEME
+GuiOffsetX 0 REPLACEME
+GuiOffsetY 0 REPLACEME
+GuiSizeForTV 0 REPLACEME
+GuiVidModeResolution 640x480 REPLACEME
+GuiWidth 0 REPLACEME
+HideMouseCursor 1 REPLACEME
+HorizScanPercentage 0 REPLACEME
+Ignore_ID3 0 REPLACEME
+IndividualMuteControl 0 REPLACEME
+IntelliLastPlayWeight 25 REPLACEME
+IntelliPlayCountWeight 25 REPLACEME
+IntelliRandomWeight 15 REPLACEME
+IntelliRatingWeight 35 REPLACEME
+ISO639Language0 eng REPLACEME
+ISO639Language1 eng REPLACEME
+JobAllowCommFlag 1 REPLACEME
+JobAllowTranscode 1 REPLACEME
+JobQueueCheckFrequency 60 REPLACEME
+JobQueueCPU 0 REPLACEME
+JobQueueMaxSimultaneousJobs 1 REPLACEME
+JobQueueWindowEnd 23:59 REPLACEME
+JobQueueWindowStart 00:00 REPLACEME
+KeyboardAccelerators 1 REPLACEME
+Language EN REPLACEME
+LastMusicPlaylistPush 0 REPLACEME
+LCDBacklightOn 1 REPLACEME
+LCDBigClock 0 REPLACEME
+LCDEnable 0 REPLACEME
+LCDHeartBeatOn 0 REPLACEME
+LCDKeyString ABCDEF REPLACEME
+LCDPopupTime 5 REPLACEME
+LCDShowChannel 1 REPLACEME
+LCDShowGeneric 1 REPLACEME
+LCDShowMenu 1 REPLACEME
+LCDShowMusic 1 REPLACEME
+LCDShowMusicItems ArtistTitle REPLACEME
+LCDShowRecStatus 0 REPLACEME
+LCDShowTime 1 REPLACEME
+LCDShowVolume 1 REPLACEME
+LircKeyPressedApp REPLACEME
+ListAsShuffled 0 REPLACEME
+LiveTVInAllPrograms 0 REPLACEME
+LogCleanDays 14 REPLACEME
+LogCleanDays 14 REPLACEME
+LogCleanEnabled 0 REPLACEME
+LogCleanEnabled 0 REPLACEME
+LogCleanMax 30 REPLACEME
+LogCleanMax 30 REPLACEME
+LogCleanPeriod 14 REPLACEME
+LogCleanPeriod 14 REPLACEME
+LogMaxCount 100 REPLACEME
+LogMaxCount 100 REPLACEME
+LogPrintLevel 8 REPLACEME
+LogPrintLevel 8 REPLACEME
+LongChannelFormat <num> <name> REPLACEME
+MasterMixerVolume 70 REPLACEME
+MenuTheme MythVantage-menu REPLACEME
+MixerControl PCM REPLACEME
+MixerDevice /dev/mixer REPLACEME
+MonitorDrives 0 REPLACEME
+MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME
+MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME
+MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME
+Mp3UseVBR 0 REPLACEME
+MTDac3Flag 0 REPLACEME
+MTDConcurrentTranscodes 1 REPLACEME
+MTDLogFlag 0 REPLACEME
+MTDNiceLevel 20 REPLACEME
+MTDPort 2442 REPLACEME
+MTDRipSize 0 REPLACEME
+MTDxvidFlag 1 REPLACEME
+MusicAudioDevice default REPLACEME
+MusicLocation /data/media/audio REPLACEME
+MusicShowRatings 0 REPLACEME
+MythArchiveAlwaysUseMythTranscode 1 REPLACEME
+MythArchiveChapterMenuAR Video REPLACEME
+MythArchiveCopyRemoteFiles 1 REPLACEME
+MythArchiveDateFormat %a %b %d REPLACEME
+MythArchiveDvdauthorCmd dvdauthor REPLACEME
+MythArchiveDVDLocation /dev/dvd REPLACEME
+MythArchiveEncodeToAc3 1 REPLACEME
+MythArchiveFfmpegCmd ffmpeg REPLACEME
+MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME
+MythArchiveGrowisofsCmd growisofs REPLACEME
+MythArchiveMainMenuAR 16:9 REPLACEME
+MythArchiveMkisofsCmd mkisofs REPLACEME
+MythArchiveMpeg2encCmd mpeg2enc REPLACEME
+MythArchiveMplexCmd mplex REPLACEME
+MythArchivePng2yuvCmd png2yuv REPLACEME
+MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME
+MythArchiveSpumuxCmd spumux REPLACEME
+MythArchiveTcrequantCmd tcrequant REPLACEME
+MythArchiveTempDir /data/media/tmp REPLACEME
+MythArchiveTimeFormat %I:%M %p REPLACEME
+MythArchiveUseFIFO 1 REPLACEME
+MythArchiveVideoFormat NTSC REPLACEME
+MythControlsVolume 1 REPLACEME
+mythdvd.DVDPlayerCommand Internal REPLACEME
+mythvideo.db_folder_view 1 REPLACEME
+mythvideo.ImageCacheSize 50 REPLACEME
+mythvideo.sort_ignores_case 1 REPLACEME
+NetworkControlEnabled 1 REPLACEME
+NetworkControlPort 6546 REPLACEME
+NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME
+NoPromptOnExit 0 REPLACEME
+NoWhitespace 0 REPLACEME
+OnlyImportNewMusic 0 REPLACEME
+OSDCC708CapitalsFont FreeMono.ttf REPLACEME
+OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME
+OSDCC708CasualFont FreeMono.ttf REPLACEME
+OSDCC708CasualItalicFont FreeMono.ttf REPLACEME
+OSDCC708CursiveFont FreeMono.ttf REPLACEME
+OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME
+OSDCC708DefaultFontType MonoSerif REPLACEME
+OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME
+OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708MonoSerifFont FreeMono.ttf REPLACEME
+OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME
+OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708PropSerifFont FreeMono.ttf REPLACEME
+OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708TextZoom 100 REPLACEME
+OSDCCFont FreeMono.ttf REPLACEME
+OSDFont FreeMono.ttf REPLACEME
+OSDGeneralTimeout 2 REPLACEME
+OSDNotifyTimeout 6 REPLACEME
+OSDProgramInfoTimeout 3 REPLACEME
+OSDTheme Gray-OSD REPLACEME
+OSDThemeFontSizeType default REPLACEME
+ParanoiaLevel Full REPLACEME
+PassThruOutputDevice Default REPLACEME
+PCMMixerVolume 70 REPLACEME
+PersistentBrowseMode 1 REPLACEME
+PIPLocation 0 REPLACEME
+PlaybackBoxStartInTitle 1 REPLACEME
+PlaybackExitPrompt 2 REPLACEME
+PlaybackPreview 1 REPLACEME
+PlaybackPreviewLowCPU 1 REPLACEME
+PlayBoxEpisodeSort Date REPLACEME
+PlayBoxOrdering 1 REPLACEME
+PlayBoxShading 0 REPLACEME
+PlayBoxTransparency 1 REPLACEME
+PlayMode none REPLACEME
+PostCDRipScript REPLACEME
+PreferredMPEG2Decoder ffmpeg REPLACEME
+PreviewFromBookmark 1 REPLACEME
+PVR350EPGAlphaValue 164 REPLACEME
+PVR350InternalAudioOnly 0 REPLACEME
+PVR350OutputEnable 0 REPLACEME
+PVR350VideoDev /dev/video16 REPLACEME
+QtFontBig 25 REPLACEME
+QtFontMedium 16 REPLACEME
+QtFontSmall 12 REPLACEME
+QueryInitialFilter 0 REPLACEME
+RandomTheme 0 REPLACEME
+RealtimePriority 1 REPLACEME
+RecordFilePrefix /data/media/video/recordings REPLACEME
+RememberRecGroup 1 REPLACEME
+RepeatMode all REPLACEME
+RunFrontendInWindow 0 REPLACEME
+SelChangeRecThreshold 16 REPLACEME
+SelectChangesChannel 1 REPLACEME
+ServiceMythWEB 0 REPLACEME
+ServiceNFS 0 REPLACEME
+ServiceSamba 0 REPLACEME
+SetupPinCodeRequired 0 REPLACEME
+ShortDateFormat M/d REPLACEME
+ShowGroupInfo 0 REPLACEME
+ShowWholeTree 1 REPLACEME
+SlideshowBackground REPLACEME
+SlideshowDelay 5 REPLACEME
+SlideshowOpenGLTransition none REPLACEME
+SlideshowOpenGLTransitionLength 2000 REPLACEME
+SlideshowTransition none REPLACEME
+SmartChannelChange 0 REPLACEME
+SmartForward 0 REPLACEME
+StickyKeys 1 REPLACEME
+Style Windows REPLACEME
+SubTitleCommand -sid %s REPLACEME
+TagSeparator - REPLACEME
+Theme basic-blue REPLACEME
+ThemeFontSizeType default REPLACEME
+ThemePainter qt REPLACEME
+TimeFormat h:mm AP REPLACEME
+timePerPage 4 REPLACEME
+TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME
+TranscodeCommand transcode REPLACEME
+TreeLevels splitartist artist album title REPLACEME
+TVVidModeForceAspect 0.0 REPLACEME
+TVVidModeForceAspect0 0.0 REPLACEME
+TVVidModeForceAspect1 0.0 REPLACEME
+TVVidModeForceAspect2 0.0 REPLACEME
+TVVidModeRefreshRate 0 REPLACEME
+TVVidModeRefreshRate0 0 REPLACEME
+TVVidModeRefreshRate1 0 REPLACEME
+TVVidModeRefreshRate2 0 REPLACEME
+TVVidModeResolution 640x480 REPLACEME
+TVVidModeResolution0 640x480 REPLACEME
+TVVidModeResolution1 640x480 REPLACEME
+TVVidModeResolution2 640x480 REPLACEME
+UDPNotifyPort 6948 REPLACEME
+UnknownCategory Unknown REPLACEME
+UnknownTitle Unknown REPLACEME
+upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME
+UseArrowAccels 1 REPLACEME
+UseOutputPictureControls 1 REPLACEME
+UseVideoModes 0 REPLACEME
+UseVideoTimebase 0 REPLACEME
+UseVirtualKeyboard 1 REPLACEME
+VCDDeviceLocation /dev/cdrom REPLACEME
+VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME
+VertScanPercentage 0 REPLACEME
+VideoAggressivePC 0 REPLACEME
+VideoArtworkDir /data/media/images/posters REPLACEME
+VideoBrowserNoDB 0 REPLACEME
+VideoDefaultParentalLevel 4 REPLACEME
+VideoGalleryAspectRatio 1 REPLACEME
+VideoGalleryColsPerPage 4 REPLACEME
+VideoGalleryNoDB 0 REPLACEME
+VideoGalleryRowsPerPage 3 REPLACEME
+VideoGallerySubtitle 1 REPLACEME
+VideoListUnknownFiletypes 1 REPLACEME
+VideoNewBrowsable 1 REPLACEME
+VideoDefaultPlayer Internal REPLACEME
+VideoStartupDir /data/media/video/movies REPLACEME
+VideoTreeLoadMetaData 1 REPLACEME
+VideoTreeNoDB 0 REPLACEME
+VidModeHeight0 0 REPLACEME
+VidModeHeight1 0 REPLACEME
+VidModeHeight2 0 REPLACEME
+VidModeWidth0 0 REPLACEME
+VidModeWidth1 0 REPLACEME
+VidModeWidth2 0 REPLACEME
+VisualCycleOnSongChange 0 REPLACEME
+VisualMode Random REPLACEME
+VisualModeDelay 0 REPLACEME
+VisualScaleHeight 1 REPLACEME
+VisualScaleWidth 1 REPLACEME
+WatchTVGuide 0 REPLACEME
+WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME
+WebBrowserHideScrollbars 0 REPLACEME
+WebBrowserScrollMode 1 REPLACEME
+WebBrowserScrollSpeed 4 REPLACEME
+WebBrowserZoomLevel 20 REPLACEME
+XScanDisplacement 0 REPLACEME
+YScanDisplacement 0 REPLACEME
+HaltCommand sudo /sbin/poweroff REPLACEME
+RebootCommand sudo /sbin/reboot REPLACEME
diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt
new file mode 100644
index 0000000..f82f2d2
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt
@@ -0,0 +1,209 @@
+context action description keylist hostname
+Music FFWD Fast forward PgDown REPLACEME
+Music STOP Stop playback O REPLACEME
+Music MUTE Mute |,\\\\,F9 REPLACEME
+Gallery SCROLLUP Scroll image up 2 REPLACEME
+Music VOLUMEDOWN Volume down [,{,F10 REPLACEME
+Music VOLUMEUP Volume up ],},F11 REPLACEME
+qt DELETE Delete D REPLACEME
+Music RWND Rewind PgUp REPLACEME
+qt EDIT Edit E REPLACEME
+Music PAUSE Pause/Start playback P REPLACEME
+Gallery RECENTER Recenter image 5 REPLACEME
+Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME
+Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME
+Gallery SCROLLRIGHT Scroll image right 6 REPLACEME
+Gallery MENU Toggle activating menu in thumbnail view M REPLACEME
+Gallery SCROLLDOWN Scroll image down 8 REPLACEME
+Gallery ZOOMIN Zoom image in 9 REPLACEME
+Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME
+Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME
+Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME
+Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME
+Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME
+Gallery END Go to the last image in thumbnail view End REPLACEME
+Gallery HOME Go to the first image in thumbnail view Home REPLACEME
+Gallery SCROLLLEFT Scroll image left 4 REPLACEME
+Gallery PLAY Start/Stop Slideshow P REPLACEME
+NetFlix REMOVE Removes movie from queue D REPLACEME
+Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME
+Gallery ZOOMOUT Zoom image out 7 REPLACEME
+NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME
+Global DOWN Down Arrow Down REPLACEME
+ITV Menu MENUTEXT Menu Text F7 REPLACEME
+ITV Menu TEXTEXIT Menu Exit F6 REPLACEME
+Global LEFT Left Arrow Left REPLACEME
+Global RIGHT Right Arrow Right REPLACEME
+Global UP Up Arrow Up REPLACEME
+Global MENU Pop-up menu M REPLACEME
+Global PREVVIEW Previous View Home REPLACEME
+Global ESCAPE Escape Esc REPLACEME
+Global PAGEUP Page Up PgUp REPLACEME
+Global SELECT Select Return,Enter,Space REPLACEME
+Global HELP Help F1 REPLACEME
+Global INFO More information I REPLACEME
+Global NEXTVIEW Next View End REPLACEME
+ITV Menu MENUBLUE Menu Blue F5 REPLACEME
+Global PAGEDOWN Page Down PgDown REPLACEME
+Global EJECT Eject Removable Media REPLACEME
+Global 3 3 3 REPLACEME
+Global 1 1 1 REPLACEME
+Global 6 6 6 REPLACEME
+Global 0 0 0 REPLACEME
+Global 2 2 2 REPLACEME
+Global 4 4 4 REPLACEME
+TV Frontend DELETE Delete Program D REPLACEME
+Global 8 8 8 REPLACEME
+Global 7 7 7 REPLACEME
+TV Frontend PAGEDOWN Page Down 9 REPLACEME
+TV Frontend PAGEUP Page Up 3 REPLACEME
+Global 5 5 5 REPLACEME
+TV Frontend CHANGERECGROUP Change Recording Group REPLACEME
+Global 9 9 9 REPLACEME
+Video END Go to the last video End REPLACEME
+Video INCPARENT Increase Parental Level ],},F11 REPLACEME
+Weather PAUSE Pause current page P REPLACEME
+TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME
+Video BROWSE Change browsable in video manager B REPLACEME
+Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME
+Video HOME Go to the first video Home REPLACEME
+Video FILTER Open video filter dialog F REPLACEME
+Welcome STARTXTERM Open an Xterm window F12 REPLACEME
+Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
+Music BLANKSCR Blank screen 5 REPLACEME
+Video DELETE Delete video D REPLACEME
+Music THMBUP Increase rating 9 REPLACEME
+Music CYCLEVIS Cycle visualizer mode 6 REPLACEME
+Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME
+Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
+TV Frontend PLAYBACK Play Program P REPLACEME
+News FORCERETRIEVE Force update news items M REPLACEME
+Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME
+News RETRIEVENEWS Update news items I REPLACEME
+News CANCEL Cancel news item updating C REPLACEME
+Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME
+Teletext Menu MENUWHITE Menu White F6 REPLACEME
+ITV Menu MENURED Menu Red F2 REPLACEME
+ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME
+ITV Menu MENUGREEN Menu Green F3 REPLACEME
+Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME
+Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME
+Teletext Menu MENUGREEN Menu Green F3 REPLACEME
+Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME
+Teletext Menu MENUBLUE Menu Blue F5 REPLACEME
+Teletext Menu TOGGLETT Toggle Teletext T REPLACEME
+Teletext Menu NEXTPAGE Next Page Down REPLACEME
+TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME
+TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME
+TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME
+TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME
+Teletext Menu MENURED Menu Red F2 REPLACEME
+TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME
+Teletext Menu PREVPAGE Previous Page Up REPLACEME
+TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME
+TV Playback PLAY Play Ctrl+P REPLACEME
+TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME
+TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME
+TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME
+TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME
+TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME
+TV Playback FINDER Show the Program Finder # REPLACEME
+TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME
+TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME
+TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME
+TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME
+TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME
+TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME
+TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME
+TV Playback SPEEDINC Increase the playback speed U REPLACEME
+TV Playback STRETCHDEC Decrease time stretch speed REPLACEME
+TV Playback SPEEDDEC Decrease the playback speed J REPLACEME
+TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME
+TV Playback GUIDE Show the Program Guide S REPLACEME
+TV Playback JUMPPREV Jump to previously played recording REPLACEME
+TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME
+TV Playback STRETCHINC Increase time stretch speed REPLACEME
+TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME
+TV Playback PREVCC708 Previous ATSC CC track REPLACEME
+TV Playback NEXTCC708 Next ATSC CC track REPLACEME
+TV Playback NEXTCC Next of any captions REPLACEME
+TV Playback NEXTSCAN Next video scan overidemode REPLACEME
+TV Playback NEXTCC608 Next VBI CC track REPLACEME
+TV Playback PREVCC608 Previous VBI CC track REPLACEME
+TV Playback PREVAUDIO Previous audio track - REPLACEME
+TV Playback PREVSUBTITLE Previous subtitle track REPLACEME
+TV Playback NEXTSUBTITLE Next subtitle track REPLACEME
+TV Playback NEXTAUDIO Next audio track + REPLACEME
+TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME
+TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME
+TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME
+TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME
+TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME
+TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME
+TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME
+TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME
+TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME
+TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME
+TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME
+TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME
+TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME
+TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME
+TV Playback SWAPPIP Swap PiP/Main N REPLACEME
+TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME
+TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME
+TV Playback TOGGLECC608 Toggle VBI CC REPLACEME
+TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME
+TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
+TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME
+TV Playback MUTE Mute |,\\\\,F9 REPLACEME
+TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME
+TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME
+TV Playback VOLUMEUP Volume up ],},F11 REPLACEME
+TV Playback TOGGLECC Toggle any captions T REPLACEME
+TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME
+TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME
+TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME
+TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME
+TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME
+TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME
+TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME
+TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME
+TV Playback JUMPFFWD Jump ahead PgDown REPLACEME
+TV Playback PREVCHAN Switch to the previous channel H REPLACEME
+TV Playback JUMPBKMRK Jump to bookmark K REPLACEME
+TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME
+TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME
+TV Playback JUMPRWND Jump back PgUp REPLACEME
+TV Playback SEEKRWND Rewind Left REPLACEME
+TV Playback SEEKFFWD Fast Forward Right REPLACEME
+TV Playback CHANNELDOWN Channel down Down REPLACEME
+TV Playback CHANNELUP Channel up Up REPLACEME
+TV Playback ARBSEEK Arbitrary Seek * REPLACEME
+TV Playback DELETE Delete Program D REPLACEME
+TV Playback CLEAROSD Clear OSD Backspace REPLACEME
+TV Frontend DETAILS Show program details U REPLACEME
+TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME
+TV Frontend UPCOMING List upcoming episodes O REPLACEME
+TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME
+TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME
+TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME
+TV Playback PAUSE Pause P REPLACEME
+TV Frontend RANKINC Increase program or channel rank Right REPLACEME
+TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME
+TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME
+TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME
+Gallery DELETE Delete marked images or current image if none are marked D REPLACEME
+TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME
+Gallery MARK Mark image T REPLACEME
+Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME
+TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
+TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME
+Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME
+Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
+Music DELETE Delete track from playlist D REPLACEME
+Gallery INFO Toggle Showing Information about Image I REPLACEME
+Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
+Music REFRESH Refresh music tree 8 REPLACEME
+Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME
+Music FILTER Filter All My Music F REPLACEME
+Music THMBDOWN Decrease rating 7 REPLACEME
diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt
new file mode 100644
index 0000000..106be04
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt
@@ -0,0 +1,320 @@
+value data hostname
+AC3PassThru 0 REPLACEME
+AggressiveSoundcardBuffer 0 REPLACEME
+AllowQuitShutdown 3 REPLACEME
+AltClearSavedPosition 1 REPLACEME
+AspectOverride 0 REPLACEME
+AudioNag 1 REPLACEME
+AudioOutputDevice /dev/dsp REPLACEME
+AutoCommercialSkip 2 REPLACEME
+AutoLookupCD 1 REPLACEME
+AutomaticSetWatched 0 REPLACEME
+AutoPlayCD 0 REPLACEME
+BackendServerPort 6543 REPLACEME
+BackendStatusPort 6544 REPLACEME
+CCBackground 0 REPLACEME
+CDBlankType fast REPLACEME
+CDCreateDir 1 REPLACEME
+CDDevice /dev/cdrom REPLACEME
+CDDiskSize 1 REPLACEME
+CDWriterEnabled 0 REPLACEME
+CDWriteSpeed 0 REPLACEME
+ChannelFormat <num> <sign> REPLACEME
+ChannelOrdering channum REPLACEME
+chanPerPage 5 REPLACEME
+ClearSavedPosition 1 REPLACEME
+CommNotifyAmount 0 REPLACEME
+CommRewindAmount 0 REPLACEME
+CustomFilters REPLACEME
+DateFormat ddd MMM d REPLACEME
+DecodeExtraAudio 1 REPLACEME
+Default MythVideo View 1 REPLACEME
+DefaultCCMode 0 REPLACEME
+DefaultRipQuality 0 REPLACEME
+DefaultTVChannel 3 REPLACEME
+Deinterlace 1 REPLACEME
+DeinterlaceFilter kerneldeint REPLACEME
+DisplayGroupDefaultView 0 REPLACEME
+DisplayGroupTitleSort 0 REPLACEME
+DisplayRecGroup Default REPLACEME
+DispRecGroupAsAllProg 0 REPLACEME
+DTSPassThru 0 REPLACEME
+DVDDeviceLocation /dev/dvd REPLACEME
+DVDOnInsertDVD 1 REPLACEME
+DVDRipLocation /data/media/tmp REPLACEME
+EjectCDAfterRipping 1 REPLACEME
+EnableMHEG 0 REPLACEME
+EnableXbox 0 REPLACEME
+EnableXbox 0 REPLACEME
+EncoderType ogg REPLACEME
+EndOfRecordingExitPrompt 1 REPLACEME
+EPGFillType 10 REPLACEME
+EPGScrollType 1 REPLACEME
+EPGShowCategoryColors 1 REPLACEME
+EPGShowCategoryText 1 REPLACEME
+EPGShowChannelIcon 1 REPLACEME
+EPGShowFavorites 0 REPLACEME
+ExactSeeking 0 REPLACEME
+FFRewReposTime 100 REPLACEME
+FFRewReverse 1 REPLACEME
+FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME
+GalleryDir /data/media/images REPLACEME
+GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME
+GalleryMoviePlayerCmd mplayer -fs %s REPLACEME
+GalleryOverlayCaption 0 REPLACEME
+GalleryRecursiveSlideshow 1 REPLACEME
+GallerySortOrder 20 REPLACEME
+GalleryThumbnailLocation 1 REPLACEME
+GameAllTreeLevels system gamename REPLACEME
+GameFavTreeLevels gamename REPLACEME
+GeneratePreviewPixmaps 0 REPLACEME
+GuiHeight 0 REPLACEME
+GuiOffsetX 0 REPLACEME
+GuiOffsetY 0 REPLACEME
+GuiSizeForTV 0 REPLACEME
+GuiVidModeResolution 640x480 REPLACEME
+GuiWidth 0 REPLACEME
+HaltCommand halt REPLACEME
+HideMouseCursor 1 REPLACEME
+HorizScanPercentage 0 REPLACEME
+Ignore_ID3 0 REPLACEME
+IndividualMuteControl 0 REPLACEME
+IntelliLastPlayWeight 25 REPLACEME
+IntelliPlayCountWeight 25 REPLACEME
+IntelliRandomWeight 15 REPLACEME
+IntelliRatingWeight 35 REPLACEME
+ISO639Language0 eng REPLACEME
+ISO639Language1 eng REPLACEME
+JobAllowCommFlag 1 REPLACEME
+JobAllowTranscode 1 REPLACEME
+JobQueueCheckFrequency 60 REPLACEME
+JobQueueCPU 0 REPLACEME
+JobQueueMaxSimultaneousJobs 1 REPLACEME
+JobQueueWindowEnd 23:59 REPLACEME
+JobQueueWindowStart 00:00 REPLACEME
+KeyboardAccelerators 1 REPLACEME
+Language EN REPLACEME
+LastMusicPlaylistPush 0 REPLACEME
+LCDBacklightOn 1 REPLACEME
+LCDBigClock 0 REPLACEME
+LCDEnable 0 REPLACEME
+LCDHeartBeatOn 0 REPLACEME
+LCDKeyString ABCDEF REPLACEME
+LCDPopupTime 5 REPLACEME
+LCDShowChannel 1 REPLACEME
+LCDShowGeneric 1 REPLACEME
+LCDShowMenu 1 REPLACEME
+LCDShowMusic 1 REPLACEME
+LCDShowMusicItems ArtistTitle REPLACEME
+LCDShowRecStatus 0 REPLACEME
+LCDShowTime 1 REPLACEME
+LCDShowVolume 1 REPLACEME
+LircKeyPressedApp REPLACEME
+ListAsShuffled 0 REPLACEME
+LiveTVInAllPrograms 0 REPLACEME
+LogCleanDays 14 REPLACEME
+LogCleanDays 14 REPLACEME
+LogCleanEnabled 0 REPLACEME
+LogCleanEnabled 0 REPLACEME
+LogCleanMax 30 REPLACEME
+LogCleanMax 30 REPLACEME
+LogCleanPeriod 14 REPLACEME
+LogCleanPeriod 14 REPLACEME
+LogMaxCount 100 REPLACEME
+LogMaxCount 100 REPLACEME
+LogPrintLevel 8 REPLACEME
+LogPrintLevel 8 REPLACEME
+LongChannelFormat <num> <name> REPLACEME
+MasterMixerVolume 70 REPLACEME
+MenuTheme STB-menu REPLACEME
+MixerControl PCM REPLACEME
+MixerDevice /dev/mixer REPLACEME
+MonitorDrives 0 REPLACEME
+MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME
+MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME
+MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME
+Mp3UseVBR 0 REPLACEME
+MTDac3Flag 0 REPLACEME
+MTDConcurrentTranscodes 1 REPLACEME
+MTDLogFlag 0 REPLACEME
+MTDNiceLevel 20 REPLACEME
+MTDPort 2442 REPLACEME
+MTDRipSize 0 REPLACEME
+MTDxvidFlag 1 REPLACEME
+MusicAudioDevice default REPLACEME
+MusicLocation /data/media/audio REPLACEME
+MusicShowRatings 0 REPLACEME
+MythArchiveAlwaysUseMythTranscode 1 REPLACEME
+MythArchiveChapterMenuAR Video REPLACEME
+MythArchiveCopyRemoteFiles 1 REPLACEME
+MythArchiveDateFormat %a %b %d REPLACEME
+MythArchiveDvdauthorCmd dvdauthor REPLACEME
+MythArchiveDVDLocation /dev/dvd REPLACEME
+MythArchiveEncodeToAc3 1 REPLACEME
+MythArchiveFfmpegCmd ffmpeg REPLACEME
+MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME
+MythArchiveGrowisofsCmd growisofs REPLACEME
+MythArchiveMainMenuAR 16:9 REPLACEME
+MythArchiveMkisofsCmd mkisofs REPLACEME
+MythArchiveMpeg2encCmd mpeg2enc REPLACEME
+MythArchiveMplexCmd mplex REPLACEME
+MythArchivePng2yuvCmd png2yuv REPLACEME
+MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME
+MythArchiveSpumuxCmd spumux REPLACEME
+MythArchiveTcrequantCmd tcrequant REPLACEME
+MythArchiveTempDir /data/media/tmp REPLACEME
+MythArchiveTimeFormat %I:%M %p REPLACEME
+MythArchiveUseFIFO 1 REPLACEME
+MythArchiveVideoFormat NTSC REPLACEME
+MythControlsVolume 1 REPLACEME
+mythdvd.DVDPlayerCommand Internal REPLACEME
+mythvideo.db_folder_view 1 REPLACEME
+mythvideo.ImageCacheSize 50 REPLACEME
+mythvideo.sort_ignores_case 1 REPLACEME
+NetworkControlEnabled 1 REPLACEME
+NetworkControlPort 6546 REPLACEME
+NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME
+NoPromptOnExit 0 REPLACEME
+NoWhitespace 0 REPLACEME
+OnlyImportNewMusic 0 REPLACEME
+OSDCC708CapitalsFont FreeMono.ttf REPLACEME
+OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME
+OSDCC708CasualFont FreeMono.ttf REPLACEME
+OSDCC708CasualItalicFont FreeMono.ttf REPLACEME
+OSDCC708CursiveFont FreeMono.ttf REPLACEME
+OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME
+OSDCC708DefaultFontType MonoSerif REPLACEME
+OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME
+OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708MonoSerifFont FreeMono.ttf REPLACEME
+OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME
+OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708PropSerifFont FreeMono.ttf REPLACEME
+OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME
+OSDCC708TextZoom 100 REPLACEME
+OSDCCFont FreeMono.ttf REPLACEME
+OSDFont FreeMono.ttf REPLACEME
+OSDGeneralTimeout 2 REPLACEME
+OSDNotifyTimeout 6 REPLACEME
+OSDProgramInfoTimeout 3 REPLACEME
+OSDTheme Gray-OSD REPLACEME
+OSDThemeFontSizeType default REPLACEME
+ParanoiaLevel Full REPLACEME
+PassThruOutputDevice Default REPLACEME
+PCMMixerVolume 70 REPLACEME
+PersistentBrowseMode 1 REPLACEME
+PIPLocation 0 REPLACEME
+PlaybackBoxStartInTitle 1 REPLACEME
+PlaybackExitPrompt 2 REPLACEME
+PlaybackPreview 1 REPLACEME
+PlaybackPreviewLowCPU 1 REPLACEME
+PlayBoxEpisodeSort Date REPLACEME
+PlayBoxOrdering 1 REPLACEME
+PlayBoxShading 0 REPLACEME
+PlayBoxTransparency 1 REPLACEME
+PlayMode none REPLACEME
+PostCDRipScript REPLACEME
+PreferredMPEG2Decoder ffmpeg REPLACEME
+PreviewFromBookmark 1 REPLACEME
+PVR350EPGAlphaValue 164 REPLACEME
+PVR350InternalAudioOnly 0 REPLACEME
+PVR350OutputEnable 0 REPLACEME
+PVR350VideoDev /dev/video16 REPLACEME
+QtFontBig 25 REPLACEME
+QtFontMedium 16 REPLACEME
+QtFontSmall 12 REPLACEME
+QueryInitialFilter 0 REPLACEME
+RandomTheme 0 REPLACEME
+RealtimePriority 1 REPLACEME
+RecordFilePrefix /data/media/video/recordings REPLACEME
+RememberRecGroup 1 REPLACEME
+RepeatMode all REPLACEME
+RunFrontendInWindow 0 REPLACEME
+SelChangeRecThreshold 16 REPLACEME
+SelectChangesChannel 1 REPLACEME
+ServiceMythWEB 0 REPLACEME
+ServiceNFS 0 REPLACEME
+ServiceSamba 0 REPLACEME
+SetupPinCodeRequired 0 REPLACEME
+ShortDateFormat M/d REPLACEME
+ShowGroupInfo 0 REPLACEME
+ShowWholeTree 1 REPLACEME
+SlideshowBackground REPLACEME
+SlideshowDelay 5 REPLACEME
+SlideshowOpenGLTransition none REPLACEME
+SlideshowOpenGLTransitionLength 2000 REPLACEME
+SlideshowTransition none REPLACEME
+SmartChannelChange 0 REPLACEME
+SmartForward 0 REPLACEME
+StickyKeys 1 REPLACEME
+Style REPLACEME
+SubTitleCommand -sid %s REPLACEME
+TagSeparator - REPLACEME
+Theme basic-blue REPLACEME
+ThemeFontSizeType default REPLACEME
+ThemePainter qt REPLACEME
+TimeFormat h:mm AP REPLACEME
+timePerPage 4 REPLACEME
+TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME
+TranscodeCommand transcode REPLACEME
+TreeLevels splitartist artist album title REPLACEME
+TVVidModeForceAspect 0.0 REPLACEME
+TVVidModeForceAspect0 0.0 REPLACEME
+TVVidModeForceAspect1 0.0 REPLACEME
+TVVidModeForceAspect2 0.0 REPLACEME
+TVVidModeRefreshRate 0 REPLACEME
+TVVidModeRefreshRate0 0 REPLACEME
+TVVidModeRefreshRate1 0 REPLACEME
+TVVidModeRefreshRate2 0 REPLACEME
+TVVidModeResolution 640x480 REPLACEME
+TVVidModeResolution0 640x480 REPLACEME
+TVVidModeResolution1 640x480 REPLACEME
+TVVidModeResolution2 640x480 REPLACEME
+UDPNotifyPort 6948 REPLACEME
+UnknownCategory Unknown REPLACEME
+UnknownTitle Unknown REPLACEME
+upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME
+UseArrowAccels 1 REPLACEME
+UseDHCP 1 REPLACEME
+UseOutputPictureControls 1 REPLACEME
+UseVideoModes 0 REPLACEME
+UseVideoTimebase 0 REPLACEME
+UseVirtualKeyboard 1 REPLACEME
+VCDDeviceLocation /dev/cdrom REPLACEME
+VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME
+VertScanPercentage 0 REPLACEME
+VideoAggressivePC 0 REPLACEME
+VideoArtworkDir /data/media/images/posters REPLACEME
+VideoBrowserNoDB 0 REPLACEME
+VideoDefaultParentalLevel 4 REPLACEME
+VideoGalleryAspectRatio 1 REPLACEME
+VideoGalleryColsPerPage 4 REPLACEME
+VideoGalleryNoDB 0 REPLACEME
+VideoGalleryRowsPerPage 3 REPLACEME
+VideoGallerySubtitle 1 REPLACEME
+VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME
+VideoListUnknownFiletypes 1 REPLACEME
+VideoNewBrowsable 1 REPLACEME
+VideoStartupDir /data/media/video/movies REPLACEME
+VideoTreeLoadMetaData 1 REPLACEME
+VideoTreeNoDB 0 REPLACEME
+VidModeHeight0 0 REPLACEME
+VidModeHeight1 0 REPLACEME
+VidModeHeight2 0 REPLACEME
+VidModeWidth0 0 REPLACEME
+VidModeWidth1 0 REPLACEME
+VidModeWidth2 0 REPLACEME
+VisualCycleOnSongChange 0 REPLACEME
+VisualMode Random REPLACEME
+VisualModeDelay 0 REPLACEME
+VisualScaleHeight 1 REPLACEME
+VisualScaleWidth 1 REPLACEME
+WatchTVGuide 0 REPLACEME
+WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME
+WebBrowserHideScrollbars 0 REPLACEME
+WebBrowserScrollMode 1 REPLACEME
+WebBrowserScrollSpeed 4 REPLACEME
+WebBrowserZoomLevel 20 REPLACEME
+XScanDisplacement 0 REPLACEME
+YScanDisplacement 0 REPLACEME
diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core b/abs/core-testing/LinHES-config/templates/sources/mv-core
new file mode 100644
index 0000000..f9f6c97
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/sources/mv-core
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-core
diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core-testing b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing
new file mode 100644
index 0000000..1fce6ea
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-core-testing
diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra b/abs/core-testing/LinHES-config/templates/sources/mv-extra
new file mode 100644
index 0000000..e13640f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra
@@ -0,0 +1,2 @@
+#Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-extra
diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing
new file mode 100644
index 0000000..c176add
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing
@@ -0,0 +1,2 @@
+##Begin official list of mirrors
+Server = http://www.mythvantage.com/repo/mv-extra-testing
diff --git a/abs/core-testing/LinHES-config/templates/sources/svc_pkg b/abs/core-testing/LinHES-config/templates/sources/svc_pkg
new file mode 100644
index 0000000..c1efdcc
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/sources/svc_pkg
@@ -0,0 +1,3 @@
+[svc_pkg]
+Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686
+
diff --git a/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf
new file mode 100755
index 0000000..51db997
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf
@@ -0,0 +1,413 @@
+#
+
+begin remote
+
+ name Time_Warner_SA3250
+ flags CONST_LENGTH|RAW_CODES
+ eps 30
+ aeps 100
+
+ ptrail 0
+ repeat 0 0
+ gap 100240
+ frequency 57600
+
+ begin raw_codes
+
+ name MUTE
+ 972 802 971 802 1887 778
+ 971 798 971 798 972 798
+ 971 798 972 798 971 1677
+ 972 802 1887 1656 992
+
+ name POWER
+ 3450 3229 894 2468 891 2468
+ 893 778 892 2468 891 2469
+ 917 2444 891 2468 892 2469
+ 891 779 892 778 918 752
+ 917 754 917 752 892 2471
+ 889 779 892 779 892 777
+ 892 779 892 777 868 2492
+ 892 2469 891 2470 890
+
+ name GUIDE
+ 3397 3285 890 2470 840 2519
+ 916 755 891 2470 839 2520
+ 891 780 891 2474 860 2495
+ 892 778 917 754 890 780
+ 891 781 864 804 917 2443
+ 865 805 891 779 866 2495
+ 864 805 892 779 891 2469
+ 865 2495 891 2469 866
+
+
+ name INFO
+ 3449 3231 918 2441 920 2440
+ 920 750 947 2414 920 2440
+ 920 750 894 777 919 750
+ 947 2413 921 750 919 750
+ 920 751 919 752 918 2441
+ 921 749 895 776 919 2441
+ 920 2440 920 2441 920 749
+ 921 2439 921 2440 921
+
+ name UP
+ 3396 3285 915 2444 919 2442
+ 918 752 916 2444 919 2441
+ 919 751 916 2445 919 751
+ 890 780 916 753 917 754
+ 942 729 889 780 916 2445
+ 919 751 915 756 914 2448
+ 916 752 916 2444 918 2442
+ 919 2441 918 2443 918
+
+ name DOWN
+ 3421 3261 890 2470 918 2442
+ 919 751 916 2446 917 2441
+ 919 2442 918 2442 918 752
+ 916 2444 919 751 890 780
+ 916 755 915 755 915 2445
+ 919 753 914 755 889 781
+ 889 781 916 2444 919 752
+ 889 2471 919 2441 918
+
+ name LEFT
+ 3427 3255 918 2441 924 2437
+ 920 750 918 2442 920 2441
+ 919 2440 921 2439 921 750
+ 919 751 944 726 919 752
+ 917 753 918 751 944 2417
+ 920 750 893 777 919 751
+ 919 752 918 2441 921 2440
+ 920 2440 920 2440 921
+
+ name RIGHT
+ 3424 3258 892 2466 921 2439
+ 896 774 920 2441 920 2440
+ 920 750 920 751 945 2414
+ 921 750 919 751 920 750
+ 919 752 919 751 919 2440
+ 921 750 918 752 918 2442
+ 920 2440 921 749 918 2443
+ 920 2440 920 2441 919
+
+ name SELECT
+ 3424 3257 944 2416 919 2442
+ 919 750 918 2442 920 2441
+ 919 751 943 727 918 2442
+ 920 2440 920 752 916 752
+ 969 702 917 753 892 2468
+ 919 751 892 778 918 2442
+ 924 2436 921 750 917 753
+ 918 2443 919 2441 919
+
+ name SETTINGS
+ 3402 3278 871 2491 921 2438
+ 921 749 922 2440 919 2441
+ 919 2440 921 749 921 750
+ 895 2465 920 2440 921 2440
+ 920 749 896 775 921 2439
+ 920 749 923 748 895 775
+ 922 2439 920 2440 920 749
+ 897 774 896 774 921
+
+ name EXIT
+ 3400 3279 896 2464 921 2439
+ 921 750 895 2465 921 2439
+ 921 749 898 772 896 2465
+ 920 2440 920 750 920 2441
+ 920 749 896 774 870 2491
+ 921 749 921 749 895 2465
+ 921 2440 920 749 922 748
+ 897 2464 920 750 896
+
+ name PGUP
+ 3425 3255 920 2440 920 2440
+ 921 749 895 2466 920 2440
+ 920 749 920 2441 896 2464
+ 921 749 919 2445 917 2440
+ 920 750 920 750 920 2441
+ 921 748 921 749 920 2440
+ 921 750 919 752 919 2440
+ 921 749 921 750 919
+
+ name PGDN
+ 3400 3281 921 2438 921 2441
+ 920 749 895 2465 896 2465
+ 920 2440 920 2440 920 2440
+ 921 749 896 2465 895 2465
+ 920 750 895 775 920 2440
+ 921 749 921 750 895 775
+ 896 774 896 774 921 2439
+ 921 749 921 751 894
+
+ name VOLUP
+ 995 778 1886 779 994 775
+ 995 777 993 774 996 774
+ 995 775 995 1654 1885 778
+ 995 775 995 774 995
+
+ name VOLDN
+ 996 778 971 802 1862 803
+ 970 799 996 774 995 774
+ 996 774 995 1654 1886 778
+ 996 773 971 1678 991
+
+ name CHUP
+ 3421 3259 916 2444 918 2443
+ 918 751 917 2444 919 2441
+ 919 2441 919 751 916 2444
+ 919 2441 919 2443 918 751
+ 941 729 916 755 917 2442
+ 919 752 916 754 891 778
+ 918 2444 918 751 916 754
+ 917 753 916 2445 919
+
+ name CHDN
+ 3421 3260 915 2445 918 2442
+ 919 751 891 2469 919 2441
+ 927 745 915 2444 919 2441
+ 919 2441 919 2442 918 752
+ 915 755 890 780 917 2443
+ 919 752 916 754 915 2445
+ 919 751 915 755 890 781
+ 914 756 916 2445 917
+
+ name A
+ 3425 3258 916 2442 920 2441
+ 919 751 918 2442 919 2441
+ 920 2440 920 2441 919 2441
+ 919 2441 920 750 917 2443
+ 920 751 917 752 919 2442
+ 920 750 918 753 917 753
+ 917 753 942 728 917 753
+ 918 2442 920 750 942
+
+ name B
+ 3398 3283 916 2443 892 2470
+ 892 778 892 2468 891 2475
+ 886 779 916 754 892 777
+ 892 778 919 2442 891 2468
+ 918 753 892 778 891 2469
+ 892 778 892 778 918 2443
+ 891 2469 892 2467 893 2469
+ 891 778 918 753 892
+
+ name C
+ 3396 3283 891 2469 892 2468
+ 892 778 917 2444 892 2468
+ 892 2469 891 778 892 779
+ 893 777 892 2468 892 2468
+ 918 752 893 777 892 2469
+ 892 778 892 778 867 802
+ 918 2444 917 2442 868 2492
+ 893 778 892 779 916
+
+ name 1
+ 3424 3257 890 2470 865 2495
+ 891 780 892 2468 865 2495
+ 892 777 891 780 892 779
+ 890 780 916 2444 865 805
+ 891 779 917 753 916 2445
+ 865 805 916 754 892 2469
+ 865 2494 916 2445 865 2495
+ 891 779 917 2443 866
+
+ name 2
+ 3422 3258 916 2444 865 2496
+ 889 782 915 2444 865 2495
+ 917 2444 839 830 891 780
+ 915 755 890 2470 864 806
+ 917 753 891 780 866 2495
+ 864 805 891 779 892 779
+ 865 2494 865 2496 891 2469
+ 865 805 891 2469 865
+
+ name 3
+ 3397 3284 916 2443 892 2468
+ 892 779 893 2467 892 2468
+ 917 753 892 2469 891 778
+ 893 778 891 2469 892 778
+ 918 753 890 779 893 2468
+ 891 779 893 778 891 2469
+ 892 777 893 2468 891 2468
+ 917 754 943 2417 892
+
+ name 4
+ 3421 3261 890 2470 839 2520
+ 917 753 891 2470 865 2495
+ 917 2443 865 2495 890 781
+ 891 778 891 2470 865 804
+ 895 776 892 779 891 2468
+ 866 805 917 753 943 727
+ 866 805 889 2471 865 2494
+ 892 780 916 2444 865
+
+ name 5
+ 3396 3282 920 2441 892 2467
+ 894 778 891 2468 892 2469
+ 891 780 866 802 893 2470
+ 890 779 918 2443 891 777
+ 892 779 918 752 892 2468
+ 892 779 918 752 918 2443
+ 891 2469 891 779 891 2469
+ 892 778 891 2468 893
+
+ name 6
+ 3396 3284 918 2442 866 2494
+ 892 778 917 2444 866 2494
+ 917 2444 865 804 893 2468
+ 890 780 916 2445 890 779
+ 892 779 891 778 918 2443
+ 891 778 892 779 892 779
+ 891 2468 892 778 919 2444
+ 889 778 893 2468 891
+
+ name 7
+ 3398 3282 893 2467 892 2468
+ 893 779 891 2469 891 2468
+ 919 752 892 2467 892 2469
+ 891 779 892 2468 892 777
+ 893 778 918 752 892 2468
+ 893 779 916 753 918 2442
+ 892 779 891 778 893 2468
+ 892 778 893 2467 892
+
+ name 8
+ 3448 3232 892 2468 866 2494
+ 892 779 892 2467 867 2494
+ 891 2469 866 2495 891 2469
+ 865 805 968 2394 864 804
+ 918 753 891 779 892 2468
+ 866 804 917 754 891 780
+ 916 752 917 754 892 2469
+ 865 804 893 2468 890
+
+ name 9
+ 3422 3258 891 2469 839 2521
+ 891 780 892 2468 824 2536
+ 916 754 916 755 891 779
+ 866 2494 839 2522 891 778
+ 892 778 890 781 915 2448
+ 837 831 891 779 890 2470
+ 837 2523 942 2418 838 832
+ 892 778 890 2471 839
+
+ name 0
+ 3398 3284 891 2469 890 2469
+ 893 779 891 2468 892 2468
+ 892 2468 892 778 892 779
+ 891 2469 892 2468 893 778
+ 892 777 893 777 893 2469
+ 891 778 892 779 868 802
+ 917 2443 892 2469 890 779
+ 891 779 892 2468 893
+
+ name LAST
+ 3422 3258 891 2471 916 2443
+ 891 780 891 2469 272 3088
+ 865 805 916 2445 308 3052
+ 890 2469 892 779 915 756
+ 889 781 889 780 890 2471
+ 890 779 889 781 891 2471
+ 272 1397 890 779 891 781
+ 890 2469 448 2912 917
+
+ name FAV
+ 3423 3257 918 2442 944 2417
+ 917 753 892 2469 890 2471
+ 324 3036 890 2469 379 289
+ 167 2525 891 2470 379 2981
+ 890 780 378 270 242 781
+ 866 806 889 2469 786 884
+ 891 779 891 779 892 779
+ 916 754 890 779 892 778
+ 891 2470 839
+
+ name REW
+ 3420 3258 916 2445 326 3033
+ 891 780 916 2443 891 2469
+ 916 2445 838 831 918 754
+ 890 2471 837 832 916 2444
+ 838 832 891 779 916 2445
+ 838 831 892 779 890 780
+ 892 2469 839 2520 891 780
+ 915 2444 836 836 890
+
+ name PLAY
+ 3448 3233 916 2444 891 2469
+ 917 753 892 2468 918 2443
+ 941 2420 891 2468 917 754
+ 915 755 914 2446 918 2443
+ 916 754 916 753 945 2416
+ 943 727 941 729 918 752
+ 917 753 919 2442 916 2444
+ 915 755 943 728 916
+
+ name FF
+ 3420 3259 917 2442 946 2415
+ 918 752 916 2445 918 2441
+ 943 728 917 753 942 728
+ 892 2470 864 806 889 2471
+ 865 805 918 752 916 2443
+ 944 726 892 779 891 2470
+ 891 2469 915 2445 917 753
+ 890 2471 222 1447 891
+
+ name PAUSE
+ 3421 3259 891 2470 787 2573
+ 890 780 916 2444 840 2520
+ 892 2468 864 806 917 2444
+ 839 831 890 780 891 779
+ 891 780 891 779 889 2471
+ 839 831 916 755 915 754
+ 892 2469 839 830 917 2444
+ 840 2521 891 2469 840
+
+ name STOP
+ 3398 3284 889 2471 325 3036
+ 891 779 890 2470 395 290
+ 140 2535 889 781 890 781
+ 889 2470 274 1397 891 2470
+ 272 3087 917 754 890 780
+ 889 2472 293 1377 890 779
+ 916 2444 448 2913 916 754
+ 866 2495 325 1344 891 779
+ 915
+
+ name REC
+ 3421 3258 917 2444 916 2444
+ 942 729 942 2420 889 2469
+ 992 2367 942 730 891 2468
+ 917 754 916 2443 892 2470
+ 892 777 916 754 892 2467
+ 943 730 916 754 891 779
+ 917 2442 917 754 943 2417
+ 918 753 915 754 892
+
+ name BYPASS
+ 3450 3231 891 2470 890 2470
+ 917 753 916 2447 913 2445
+ 273 3088 889 780 890 2470
+ 891 2469 916 755 890 780
+ 942 727 918 752 916 2444
+ 890 782 916 754 865 805
+ 891 2469 891 780 889 781
+ 891 2468 259 3102 866
+
+ name TV/VCR
+ 19945 3915 612 1873 560 1926
+ 560 1925 561 931 560 931
+ 587 905 559 931 563 931
+ 557 932 561 1925 585 908
+ 583 1901 559 931 586 905
+ 585 907 610 1875 561 1924
+ 561 1926 559 1926 535 1951
+ 559 1925 586 907 585 1899
+ 560 931 1048 7898 3707 3862
+ 587 1899 586 1899 586 1900
+ 559 932 586 908 323
+
+ end raw_codes
+
+ end remote
diff --git a/abs/core-testing/LinHES-config/templates/xine.config.template b/abs/core-testing/LinHES-config/templates/xine.config.template
new file mode 100644
index 0000000..966487f
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xine.config.template
@@ -0,0 +1,754 @@
+#
+# xine config file
+#
+.version:2
+
+# Entries which are still set to their default values are commented out.
+# Remove the '#' at the beginning of the line, if you want to change them.
+
+# Enable deinterlacing by default
+# bool, default: 0
+#gui.deinterlace_by_default:0
+
+# Configuration experience level
+# { Beginner Advanced Expert Master of the known universe }, default: 0
+gui.experience_level:Expert
+
+# Enable OSD support
+# bool, default: 1
+#gui.osd_enabled:1
+
+# Dismiss OSD time (s)
+# numeric, default: 3
+#gui.osd_timeout:3
+
+# Ask user for playback with unsupported codec
+# bool, default: 0
+#gui.play_anyway:0
+
+# Automatically reload old playlist
+# bool, default: 0
+#gui.playlist_auto_reload:0
+
+# Audio visualization plugin
+# { oscope fftscope fftgraph goom }, default: 0
+gui.post_audio_plugin:fftgraph
+
+# gui skin theme
+# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4
+gui.skin:KeramicRH8
+
+# Change xine's behavior for unexperienced user
+# bool, default: 1
+#gui.smart_mode:1
+
+# Snapshot location
+# string, default: /home/jams
+#gui.snapshotdir:/home/jams
+
+# Display splash screen
+# bool, default: 1
+gui.splash:0
+
+# Subtitle autoloading
+# bool, default: 1
+#gui.subtitle_autoload:1
+
+# Visual animation style
+# { None Post Plugin Stream Animation }, default: 1
+#gui.visual_anim:Post Plugin
+
+# Windows stacking (more)
+# bool, default: 0
+#gui.always_layer_above:0
+
+# Audio mixer control method
+# { Sound card Software }, default: 0
+#gui.audio_mixer_method:Sound card
+
+# Visiblility behavior of panel
+# bool, default: 0
+#gui.auto_panel_visibility:0
+
+# Visibility behavior of output window
+# bool, default: 0
+#gui.auto_video_output_visibility:0
+
+# Deinterlace plugin.
+# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
+#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
+
+# Event sender behavior
+# bool, default: 1
+#gui.eventer_sticky:1
+
+# Windows stacking
+# bool, default: 0
+#gui.layer_above:0
+
+# Use unscaled OSD
+# bool, default: 1
+gui.osd_use_unscaled:0
+
+# Screensaver reset interval (s)
+# numeric, default: 10
+#gui.screensaver_timeout:10
+
+# Menu shortcut style
+# { Windows style Emacs style }, default: 0
+#gui.shortcut_style:Windows style
+
+# Stream information
+# bool, default: 0
+#gui.sinfo_auto_update:0
+
+# Skin Server Url
+# string, default: http://xine.sourceforge.net/skins/skins.slx
+#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
+
+# Chapter hopping
+# bool, default: 1
+#gui.skip_by_chapter:1
+
+# New stream sizes resize output window
+# bool, default: 1
+#gui.stream_resize_window:1
+
+# Tips timeout (ms)
+# numeric, default: 5000
+#gui.tips_timeout:5000
+
+# gui tips visibility
+# bool, default: 1
+#gui.tips_visible:1
+
+# Name of video display
+# string, default:
+#gui.video_display:
+
+# Synchronized X protocol (debug)
+# bool, default: 0
+#gui.xsynchronize:0
+
+# Double size for small streams (require stream_resize_window)
+# bool, default: 0
+#gui.zoom_small_stream:0
+
+# Logo mrl
+# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
+#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
+
+# use XVidModeExtension when switching to fullscreen
+# bool, default: 0
+#gui.use_xvidext:0
+
+# height for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_height:-8192
+
+# width for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_width:-8192
+
+# x coordinate for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_x:-8192
+
+# y coordinate for xinerama fullscreen (-8192 = autodetect)
+# numeric, default: -8192
+#gui.xinerama_fullscreen_y:-8192
+
+# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3)
+# string, default: 0 1
+#gui.xinerama_use_screens:0 1
+
+# Amplification level
+# [0..200], default: 100
+#gui.amp_level:100
+
+# gui panel visibility
+# bool, default: 1
+gui.panel_visible:0
+
+# numeric, default: 200
+gui.panel_x:21
+
+# numeric, default: 100
+gui.panel_y:1050
+
+gui.control_x:186
+
+gui.control_y:46
+
+gui.dropped_frames_warning:0
+
+gui.eventer_x:1041
+
+gui.eventer_y:781
+
+gui.mrl_browser_x:23
+
+gui.mrl_browser_y:9
+
+gui.setup_x:717
+
+gui.setup_y:227
+
+gui.viewlog_x:200
+
+gui.viewlog_y:210
+
+# color specification yuv-opacity
+# string, default: 8080c0-f
+#gui.osdmenu.color_focused_button:8080c0-f
+
+# color specification yuv-opacity
+# string, default: 808080-f
+#gui.osdmenu.color_focused_slider:808080-f
+
+# color specification yuv-opacity
+# string, default: ff8080-f
+#gui.osdmenu.color_focused_slider_knob:ff8080-f
+
+# color specification yuv-opacity
+# string, default: 808080-f
+#gui.osdmenu.color_focused_text_border:808080-f
+
+# color specification yuv-opacity
+# string, default: ff8080-f
+#gui.osdmenu.color_focused_text_foreground:ff8080-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_label_border:0080c0-f
+
+# color specification yuv-opacity
+# string, default: c08080-f
+#gui.osdmenu.color_label_foreground:c08080-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_label_window:0080c0-f
+
+# color specification yuv-opacity
+# string, default: 008000-f
+#gui.osdmenu.color_slider:008000-f
+
+# color specification yuv-opacity
+# string, default: ffff00-f
+#gui.osdmenu.color_slider_knob:ffff00-f
+
+# color specification yuv-opacity
+# string, default: 008000-f
+#gui.osdmenu.color_text_border:008000-f
+
+# color specification yuv-opacity
+# string, default: ffff00-f
+#gui.osdmenu.color_text_foreground:ffff00-f
+
+# color specification yuv-opacity
+# string, default: 0080c0-f
+#gui.osdmenu.color_text_window:0080c0-f
+
+# directory a media in dvd device will be mounted
+# string, default: /dvd
+#gui.osdmenu.dvd_mountpoint:/dvd
+
+# palette (foreground-border-background) to use for subtitles and OSD
+# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
+#ui.osd.text_palette:white-black-transparent
+
+# audio driver to use
+# { auto null alsa oss esd file none }, default: 0
+audio.driver:oss
+
+# a/v sync method to use by OSS
+# { auto getodelay getoptr softsync probebuffer }, default: 0
+#audio.oss_sync_method:auto
+
+# use A/52 dynamic range compression
+# bool, default: 0
+#audio.a52.dynamic_range:0
+
+# downmix audio to 2 channel surround stereo
+# bool, default: 0
+#audio.a52.surround_downmix:0
+
+# A/52 volume
+# [0..200], default: 100
+#audio.a52.level:100
+
+# OSS audio device name
+# { auto /dev/dsp /dev/sound/dsp }, default: 0
+#audio.device.oss_device_name:auto
+
+# OSS audio device number, -1 for none
+# numeric, default: -1
+#audio.device.oss_device_number:-1
+
+# OSS audio mixer number, -1 for none
+# numeric, default: -1
+#audio.device.oss_mixer_number:-1
+
+audio.device.alsa_front_device:default
+
+# speaker arrangement
+# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
+#audio.output.speaker_arrangement:Stereo 2.0
+
+# offset for digital passthrough
+# numeric, default: 0
+#audio.synchronization.passthrough_offset:0
+
+# play audio even on slow/fast speeds
+# bool, default: 0
+#audio.synchronization.slow_fast_audio:0
+
+# method to sync audio and video
+# { metronom feedback resample }, default: 0
+#audio.synchronization.av_sync_method:metronom feedback
+
+# always resample to this rate (0 to disable)
+# numeric, default: 0
+#audio.synchronization.force_rate:0
+
+# enable resampling
+# { auto off on }, default: 0
+#audio.synchronization.resample_mode:auto
+
+# startup audio volume
+# [0..100], default: 50
+#audio.volume.mixer_volume:50
+
+# restore volume level at startup
+# bool, default: 0
+#audio.volume.remember_volume:0
+
+# video driver to use
+# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0
+#video.driver:auto
+
+# pitch alignment workaround
+# bool, default: 0
+#video.device.xv_pitch_alignment:0
+
+# disable exact alpha blending of overlays
+# bool, default: 0
+#video.output.disable_exact_alphablend:0
+
+# disable all video scaling
+# bool, default: 0
+#video.output.disable_scaling:0
+
+# horizontal image position in the output window
+# [0..100], default: 50
+#video.output.horizontal_position:50
+
+# vertical image position in the output window
+# [0..100], default: 50
+#video.output.vertical_position:50
+
+# deinterlace method (deprecated)
+# { none bob weave greedy onefield onefield_xv linearblend }, default: 4
+video.output.xv_deinterlace_method:linearblend
+
+# MPEG-4 postprocessing quality
+# [0..6], default: 3
+#video.processing.ffmpeg_pp_quality:3
+
+# DXR3 device number
+# numeric, default: 0
+#dxr3.device_number:0
+
+# swap odd and even lines
+# bool, default: 0
+#dxr3.encoding.swap_fields:0
+
+# add black bars to correct aspect ratio
+# bool, default: 1
+#dxr3.encoding.add_bars:1
+
+# use smooth play mode for mpeg encoder playback
+# bool, default: 1
+#dxr3.encoding.alt_play_mode:1
+
+# device used for CD audio
+# string, default: /dev/cdrom
+#media.audio_cd.device:/dev/cdrom
+
+# slow down disc drive to this speed factor
+# numeric, default: 4
+#media.audio_cd.drive_slowdown:4
+
+# query CDDB
+# bool, default: 1
+#media.audio_cd.use_cddb:1
+
+# CDDB cache directory
+# string, default: /home/jams/.xine/cddbcache
+#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache
+
+# CDDB server port
+# numeric, default: 8880
+#media.audio_cd.cddb_port:8880
+
+# CDDB server name
+# string, default: freedb.freedb.org
+#media.audio_cd.cddb_server:freedb.freedb.org
+
+# directory for saving streams
+# string, default:
+#media.capture.save_dir:
+
+# Number of dvb card to use.
+# numeric, default: 0
+#media.dvb.adapter:0
+
+# Remember last DVB channel watched
+# bool, default: 1
+#media.dvb.remember_channel:1
+
+# Last DVB channel viewed
+# numeric, default: -1
+#media.dvb.last_channel:-1
+
+# default language for DVD playback
+# string, default: en
+#media.dvd.language:en
+
+# region the DVD player claims to be in (1 to 8)
+# numeric, default: 1
+#media.dvd.region:1
+
+# device used for DVD playback
+# string, default: /dev/dvd
+#media.dvd.device:/dev/dvd
+
+# raw device set up for DVD access
+# string, default: /dev/rdvd
+#media.dvd.raw_device:/dev/rdvd
+
+# read-ahead caching
+# bool, default: 1
+#media.dvd.readahead:1
+
+# CSS decryption method
+# { key disc title }, default: 0
+#media.dvd.css_decryption_method:key
+
+# play mode when title/chapter is given
+# { entire dvd one chapter }, default: 0
+#media.dvd.play_single_chapter:entire dvd
+
+# unit for seeking
+# { seek in program chain seek in program }, default: 0
+#media.dvd.seek_behaviour:seek in program chain
+
+# unit for the skip action
+# { skip program skip part skip title }, default: 0
+#media.dvd.skip_behaviour:skip program
+
+# path to the title key cache
+# string, default: /home/jams/.dvdcss/
+#media.dvd.css_cache_path:/home/jams/.dvdcss/
+
+# file browsing start location
+# string, default: /home/jams
+#media.files.origin_path:/home/jams
+
+# list hidden files
+# bool, default: 0
+#media.files.show_hidden_files:0
+
+# network bandwidth
+# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10
+#media.network.bandwidth:1.5 Mbps (T1)
+
+# Timeout for network stream reading (in seconds)
+# numeric, default: 30
+#media.network.timeout:30
+
+# Domains for which to ignore the HTTP proxy
+# string, default:
+#media.network.http_no_proxy:
+
+# HTTP proxy host
+# string, default:
+#media.network.http_proxy_host:
+
+# HTTP proxy password
+# string, default:
+#media.network.http_proxy_password:
+
+# HTTP proxy port
+# numeric, default: 80
+#media.network.http_proxy_port:80
+
+# HTTP proxy username
+# string, default:
+#media.network.http_proxy_user:
+
+# MMS protocol
+# { auto TCP HTTP }, default: 0
+#media.network.mms_protocol:auto
+
+# automatically advance VCD track/entry
+# bool, default: 1
+#media.vcd.autoadvance:1
+
+# VCD default type to use on autoplay
+# { MPEG track entry segment playback-control item }, default: 3
+#media.vcd.autoplay:playback-control item
+
+# CD-ROM drive used for VCD when none given
+# string, default:
+#media.vcd.device:
+
+# VCD position slider range
+# { auto track entry }, default: 0
+#media.vcd.length_reporting:auto
+
+# show 'rejected' VCD LIDs
+# bool, default: 0
+#media.vcd.show_rejected:0
+
+# VCD format string for stream comment field
+# string, default: %P - Track %T
+#media.vcd.comment_format:%P - Track %T
+
+# VCD debug flag mask
+# numeric, default: 0
+#media.vcd.debug:0
+
+# VCD format string for display banner
+# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
+#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
+
+# v4l radio device
+# string, default: /dev/v4l/radio0
+#media.video4linux.radio_device:/dev/v4l/radio0
+
+# v4l video device
+# string, default: /dev/v4l/video0
+#media.video4linux.video_device:/dev/v4l/video0
+
+# device used for WinTV-PVR 250/350 (pvr plugin)
+# string, default: /dev/video0
+#media.wintv_pvr.device:/dev/video0
+
+# path to RealPlayer codecs
+# string, default: /usr/lib/win32
+#decoder.external.real_codecs_path:/usr/lib/win32
+
+# path to Win32 codecs
+# string, default: /usr/lib/win32
+#decoder.external.win32_codecs_path:/usr/lib/win32
+
+# subtitle size
+# { tiny small normal large very large huge }, default: 1
+#subtitles.separate.subtitle_size:small
+
+# subtitle vertical offset
+# numeric, default: 0
+#subtitles.separate.vertical_offset:0
+
+# font for subtitles
+# string, default: sans
+#subtitles.separate.font:sans
+
+# encoding of the subtitles
+# string, default: iso-8859-1
+#subtitles.separate.src_encoding:iso-8859-1
+
+# use unscaled OSD if possible
+# bool, default: 1
+#subtitles.separate.use_unscaled_osd:1
+
+# default duration of subtitle display in seconds
+# numeric, default: 4
+#subtitles.separate.timeout:4
+
+# frames per second to generate
+# numeric, default: 14
+#effects.goom.fps:14
+
+# goom image height
+# numeric, default: 240
+#effects.goom.height:240
+
+# goom image width
+# numeric, default: 320
+#effects.goom.width:320
+
+# colorspace conversion method
+# { Fast but not photorealistic Slow but looks better }, default: 0
+#effects.goom.csc_method:Fast but not photorealistic
+
+# number of audio buffers
+# numeric, default: 230
+#engine.buffers.audio_num_buffers:230
+
+# number of video buffers
+# numeric, default: 500
+#engine.buffers.video_num_buffers:500
+
+# default number of video frames
+# numeric, default: 15
+#engine.buffers.video_num_frames:15
+
+# priority for a/52 decoder
+# numeric, default: 0
+#engine.decoder_priorities.a/52:0
+
+# priority for bitplane decoder
+# numeric, default: 0
+#engine.decoder_priorities.bitplane:0
+
+# priority for dts decoder
+# numeric, default: 0
+#engine.decoder_priorities.dts:0
+
+# priority for dvaudio decoder
+# numeric, default: 0
+#engine.decoder_priorities.dvaudio:0
+
+# priority for dxr3-mpeg2 decoder
+# numeric, default: 0
+#engine.decoder_priorities.dxr3-mpeg2:0
+
+# priority for dxr3-spudec decoder
+# numeric, default: 0
+#engine.decoder_priorities.dxr3-spudec:0
+
+# priority for faad decoder
+# numeric, default: 0
+#engine.decoder_priorities.faad:0
+
+# priority for ffmpeg-wmv8 decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpeg-wmv8:0
+
+# priority for ffmpeg-wmv9 decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpeg-wmv9:0
+
+# priority for ffmpegaudio decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpegaudio:0
+
+# priority for ffmpegvideo decoder
+# numeric, default: 0
+#engine.decoder_priorities.ffmpegvideo:0
+
+# priority for gdkpixbuf decoder
+# numeric, default: 0
+#engine.decoder_priorities.gdkpixbuf:0
+
+# priority for gsm610 decoder
+# numeric, default: 0
+#engine.decoder_priorities.gsm610:0
+
+# priority for image decoder
+# numeric, default: 0
+#engine.decoder_priorities.image:0
+
+# priority for mad decoder
+# numeric, default: 0
+#engine.decoder_priorities.mad:0
+
+# priority for mpc decoder
+# numeric, default: 0
+#engine.decoder_priorities.mpc:0
+
+# priority for mpeg2 decoder
+# numeric, default: 0
+#engine.decoder_priorities.mpeg2:0
+
+# priority for nsf decoder
+# numeric, default: 0
+#engine.decoder_priorities.nsf:0
+
+# priority for pcm decoder
+# numeric, default: 0
+#engine.decoder_priorities.pcm:0
+
+# priority for qta decoder
+# numeric, default: 0
+#engine.decoder_priorities.qta:0
+
+# priority for qtv decoder
+# numeric, default: 0
+#engine.decoder_priorities.qtv:0
+
+# priority for real decoder
+# numeric, default: 0
+#engine.decoder_priorities.real:0
+
+# priority for realadec decoder
+# numeric, default: 0
+#engine.decoder_priorities.realadec:0
+
+# priority for rgb decoder
+# numeric, default: 0
+#engine.decoder_priorities.rgb:0
+
+# priority for spucc decoder
+# numeric, default: 0
+#engine.decoder_priorities.spucc:0
+
+# priority for spucmml decoder
+# numeric, default: 0
+#engine.decoder_priorities.spucmml:0
+
+# priority for spudec decoder
+# numeric, default: 0
+#engine.decoder_priorities.spudec:0
+
+# priority for spudvb decoder
+# numeric, default: 0
+#engine.decoder_priorities.spudvb:0
+
+# priority for sputext decoder
+# numeric, default: 0
+#engine.decoder_priorities.sputext:0
+
+# priority for theora decoder
+# numeric, default: 0
+#engine.decoder_priorities.theora:0
+
+# priority for vorbis decoder
+# numeric, default: 0
+#engine.decoder_priorities.vorbis:0
+
+# priority for win32a decoder
+# numeric, default: 0
+#engine.decoder_priorities.win32a:0
+
+# priority for win32v decoder
+# numeric, default: 0
+#engine.decoder_priorities.win32v:0
+
+# priority for yuv decoder
+# numeric, default: 0
+#engine.decoder_priorities.yuv:0
+
+# media format detection strategy
+# { default reverse content extension }, default: 0
+#engine.demux.strategy:default
+
+# memcopy method used by xine
+# { probe libc kernel mmx mmxext sse }, default: 0
+engine.performance.memcpy_method:libc
+
+# percentage of discarded frames to tolerate
+# numeric, default: 10
+#engine.performance.warn_discarded_threshold:10
+
+# percentage of skipped frames to tolerate
+# numeric, default: 10
+#engine.performance.warn_skipped_threshold:10
+
+# allow implicit changes to the configuration (e.g. by MRL)
+# bool, default: 0
+#misc.implicit_config:0
+
diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC
new file mode 100644
index 0000000..b2cd709
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC
@@ -0,0 +1,33 @@
+ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750
+
+ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525
+
+ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync
+
+ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$
+
+ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$
+
+ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace
+
+ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace
+
+Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace
+
+Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace
+
+Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace
+
+Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace
+
+Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace
+
+Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace
+
+Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135
+
+Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace
+
+Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+
+Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync
diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD
new file mode 100644
index 0000000..9e846d0
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD
@@ -0,0 +1,9 @@
+#DVD-NativeModes
+ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace
+ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace
+ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525
+ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525
diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC
new file mode 100644
index 0000000..5536c1b
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC
@@ -0,0 +1,10 @@
+#Analog-RegularModes
+ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace
+ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525
+ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace
+ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525
+ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace
+ModeLine "Broadcast-59.94p" 483 484 492 525
+ModeLine "VHS-59.94i" 483 484 492 525 Interlace
+ModeLine "VHS-59.94p" 483 484 492 525
+
diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA
new file mode 100644
index 0000000..a026f64
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA
@@ -0,0 +1,163 @@
+# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
+
+# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
+
+# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
+ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
+
+# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
+ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
+
+# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
+ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
+
+# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
+ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
+
+# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
+ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
+
+# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
+ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
+
+# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
+ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
+
+# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
+ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
+
+# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
+ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
+
+# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
+ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
+
+# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
+ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
+
+# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
+ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
+
+# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
+ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
+
+# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
+ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
+
+# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
+ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
+
+# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
+ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
+
+# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
+ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
+
+# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
+ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
+
+# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
+ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
+
+# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
+ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
+
+# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
+ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
+
+# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
+ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
+# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
+ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
+ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
+ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
+
+# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
+ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
+
+# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
+ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
+
+# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
+ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
+
+# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
+ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
+
+# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
+ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
+
+# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
+ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
+
+# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
+ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
+
+# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
+ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
+
+# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
+ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
+
+# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
+ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
+
+# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
+ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
+
+# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
+ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
+
+# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
+ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
+
+# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
+ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
+
+# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
+ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
+
+# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
+ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
+
+# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
+ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
+
+# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
+ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
+
+# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
+ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
+
+# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
+ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
+
+# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
+ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
+
+# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
+ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
+
+# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
+ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
+
+# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
+ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
+
+# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
+ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
+
+# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
+ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
+
+# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
+ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
+
+# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
+ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.custom b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom
new file mode 100644
index 0000000..ca6d678
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom
@@ -0,0 +1 @@
+ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace
diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati
new file mode 100644
index 0000000..c6d9249
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati
@@ -0,0 +1,94 @@
+Section "ServerLayout"
+ Identifier "X.org Configured"
+ Screen 0 "aticonfig-Screen[0]" 0 0
+ InputDevice "Mouse0" "CorePointer"
+ InputDevice "Keyboard0" "CoreKeyboard"
+EndSection
+
+Section "Files"
+ RgbPath "/usr/share/X11/rgb"
+ ModulePath "/usr/lib/xorg/modules"
+ FontPath "/usr/share/fonts/misc"
+ FontPath "/usr/share/fonts/75dpi"
+ FontPath "/usr/share/fonts/100dpi"
+ FontPath "/usr/share/fonts/TTF"
+ FontPath "/usr/share/fonts/Type1"
+EndSection
+
+Section "Module"
+ Load "xtrap"
+ Load "dbe"
+ Load "record"
+ Load "extmod"
+ Load "dri"
+ Load "type1"
+ Load "freetype"
+EndSection
+
+Section "InputDevice"
+ Identifier "Keyboard0"
+ Driver "kbd"
+EndSection
+
+Section "InputDevice"
+ Identifier "Mouse0"
+ Driver "mouse"
+ Option "Protocol" "auto"
+ Option "Device" "/dev/input/mice"
+ Option "ZAxisMapping" "4 5 6 7"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ VendorName "Monitor Vendor"
+ ModelName "Monitor Model"
+EndSection
+
+Section "Monitor"
+ Identifier "aticonfig-Monitor[0]"
+# HorizSync
+# VertRefresh
+ Option "VendorName" "ATI Proprietary Driver"
+ Option "ModelName" "Generic Autodetecting Monitor"
+ Option "DPMS" "true"
+EndSection
+
+Section "Device"
+
+ ### Available Driver options are:-
+ ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+ ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+ ### [arg]: arg optional
+ #Option "ShadowFB" # [<bool>]
+ #Option "DefaultRefresh" # [<bool>]
+ #Option "ModeSetClearScreen" # [<bool>]
+ Identifier "Card0"
+ Driver "vesa"
+ VendorName "ATI Technologies Inc"
+ BoardName "RV370 5B60 [Radeon X300 (PCIE)]"
+ BusID "PCI:1:0:0"
+EndSection
+
+Section "Device"
+ Identifier "aticonfig-Device[0]"
+ Driver "fglrx"
+#INSERT HERE
+
+# Option "ForceMonitors" "tv,nocrt1,notmds1"
+# Option "TVStandard" "SCART"
+# Option "TVFormat" "PAL-B"
+EndSection
+
+
+Section "Screen"
+ Identifier "aticonfig-Screen[0]"
+ Device "aticonfig-Device[0]"
+ Monitor "aticonfig-Monitor[0]"
+ DefaultDepth 24
+ SubSection "Display"
+ Viewport 0 0
+ Depth 24
+ Modes "640x480"
+ EndSubSection
+EndSection
+
diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel
new file mode 100644
index 0000000..a4d258a
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel
@@ -0,0 +1,148 @@
+Section "ServerLayout"
+ Identifier "Xorg Configured"
+ Screen 0 "Screen0" 0 0
+ InputDevice "Keyboard0" "CoreKeyboard"
+ InputDevice "PS/2 Mouse" "CorePointer"
+# Serial Mouse not detected
+# USB Mouse not detected
+EndSection
+
+Section "ServerFlags"
+ Option "AllowMouseOpenFail" "true"
+
+EndSection
+
+Section "Files"
+ RgbPath "/usr/share/X11/rgb"
+ ModulePath "/usr/lib/xorg/modules"
+ FontPath "/usr/share/fonts/misc:unscaled"
+ FontPath "/usr/share/fonts/misc"
+ FontPath "/usr/share/fonts/75dpi:unscaled"
+ FontPath "/usr/share/fonts/75dpi"
+ FontPath "/usr/share/fonts/100dpi:unscaled"
+ FontPath "/usr/share/fonts/100dpi"
+ FontPath "/usr/share/fonts/PEX"
+# Additional fonts: Locale, Gimp, TTF...
+ FontPath "/usr/share/fonts/cyrillic"
+# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
+# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
+# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
+ FontPath "/usr/share/fonts/Type1"
+ FontPath "/usr/share/fonts/ttf/western"
+ FontPath "/usr/share/fonts/ttf/decoratives"
+ FontPath "/usr/share/fonts/truetype"
+ FontPath "/usr/share/fonts/truetype/openoffice"
+ FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
+ FontPath "/usr/share/fonts/latex-ttf-fonts"
+ FontPath "/usr/share/fonts/defoma/CID"
+ FontPath "/usr/share/fonts/defoma/TrueType"
+EndSection
+
+Section "Module"
+ Load "ddc" # ddc probing of monitor
+ Load "dbe"
+ Load "dri"
+ Load "extmod"
+ Load "glx"
+ Load "bitmap" # bitmap-fonts
+ Load "type1"
+ Load "freetype"
+ Load "record"
+EndSection
+
+Section "InputDevice"
+ Identifier "Keyboard0"
+ Driver "keyboard"
+ Option "CoreKeyboard"
+ Option "XkbRules" "xorg"
+ Option "XkbModel" "pc105"
+ Option "XkbLayout" ""
+ Option "XkbVariant" ""
+EndSection
+
+Section "InputDevice"
+ Identifier "Serial Mouse"
+ Driver "mouse"
+ Option "Protocol" "Microsoft"
+ Option "Device" "/dev/ttyS0"
+ Option "Emulate3Buttons" "true"
+ Option "Emulate3Timeout" "70"
+ Option "SendCoreEvents" "true"
+EndSection
+
+Section "InputDevice"
+ Identifier "PS/2 Mouse"
+ Driver "mouse"
+ Option "Protocol" "auto"
+ Option "ZAxisMapping" "4 5"
+ Option "Device" "/dev/psaux"
+ Option "Emulate3Buttons" "true"
+ Option "Emulate3Timeout" "70"
+ Option "SendCoreEvents" "true"
+EndSection
+
+Section "InputDevice"
+ Identifier "USB Mouse"
+ Driver "mouse"
+ Option "Device" "/dev/input/mice"
+ Option "SendCoreEvents" "true"
+ Option "Protocol" "IMPS/2"
+ Option "ZAxisMapping" "4 5"
+ Option "Buttons" "5"
+EndSection
+
+# Auto-generated by Archie mkxcfg
+
+Section "Monitor"
+ Identifier "Monitor0"
+ Option "DPMS" "true"
+EndSection
+
+# Auto-generated by Archie mkxcfg
+
+Section "Device"
+ Identifier "Card0"
+ Driver "intel"
+ VendorName "All"
+ BoardName "All"
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Card0"
+ Monitor "Monitor0"
+ DefaultColorDepth 16
+ SubSection "Display"
+ Depth 1
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+ SubSection "Display"
+ Depth 4
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+ SubSection "Display"
+ Depth 8
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+ SubSection "Display"
+ Depth 15
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+ SubSection "Display"
+ Depth 16
+ Modes "800x600"
+ virtual 800 600
+ EndSubSection
+ SubSection "Display"
+ Depth 24
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+ SubSection "Display"
+ Depth 32
+ Modes "1024x768" "800x600" "640x480"
+ EndSubSection
+EndSection
+
+Section "DRI"
+ Mode 0666
+EndSection
diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia
new file mode 100755
index 0000000..dec0f42
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia
@@ -0,0 +1,90 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+ Identifier "Layout0"
+ Screen 0 "Screen0"
+ InputDevice "Keyboard0" "CoreKeyboard"
+ InputDevice "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+ RgbPath "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+ Load "dbe"
+ Load "extmod"
+ Load "type1"
+ Load "freetype"
+ Load "glx"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Mouse0"
+ Driver "mouse"
+ Option "Protocol" "auto"
+ Option "Device" "/dev/psaux"
+ Option "Emulate3Buttons" "no"
+ Option "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Keyboard0"
+ Driver "keyboard"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ VendorName "Unknown"
+ ModelName "Unknown"
+# HorizSync
+# VertRefresh
+ Option "DPMS" "false"
+ DisplaySize 203 153
+ Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
+ Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+ ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+ Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
+ ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+#INSERT MODELINE
+EndSection
+
+Section "Device"
+ Identifier "Device0"
+ Driver "nvidia"
+ VendorName "NVIDIA Corporation"
+ Option "DPI" "100 x 100"
+ Option "NoLogo" "1"
+
+#INSERT HERE
+
+#END OPTIONS
+
+# Option "ConnectedMonitor" "DFP"
+# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled"
+# Option "DigitalVibrance" "0"
+# Option "TransparentIndex" "0"
+# Option "CursorShadowAlpha" "64"
+# Option "CursorShadowXOffset" "4"
+# Option "UseEdidFreqs" "True"
+# Option "NvAGP" "1"
+
+
+
+
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Device0"
+ Monitor "Monitor0"
+ DefaultDepth 24
+ SubSection "Display"
+ Depth 24
+ Modes "1280x720"
+ EndSubSection
+EndSection
+
diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via
new file mode 100644
index 0000000..6dd7821
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via
@@ -0,0 +1,77 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+ Identifier "Layout0"
+ Screen 0 "Screen0"
+ InputDevice "Keyboard0" "CoreKeyboard"
+ InputDevice "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+ RgbPath "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+ Load "dbe"
+ Load "glx"
+ Load "extmod"
+ Load "type1"
+ Load "freetype"
+ Load "dri"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Mouse0"
+ Driver "mouse"
+ Option "Protocol" "auto"
+ Option "Device" "/dev/psaux"
+ Option "Emulate3Buttons" "no"
+ Option "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Keyboard0"
+ Driver "keyboard"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ VendorName "Unknown"
+ ModelName "Unknown"
+ HorizSync 30.0 - 110.0
+ VertRefresh 50.0 - 150.0
+ Option "DPMS" "false"
+ Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
+ Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+ ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+ Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
+ ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+EndSection
+
+Section "Device"
+ Identifier "Device0"
+ Driver "via"
+ VendorName "via"
+ Option "DPI" "100 x 100"
+
+
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Device0"
+ Monitor "Monitor0"
+ DefaultDepth 16
+ SubSection "Display"
+ Depth 16
+ Modes "800x600"
+ EndSubSection
+EndSection
+
+Section "DRI"
+ Group "video"
+ Mode 0666
+ EndSection
diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware
new file mode 100755
index 0000000..843f2f4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware
@@ -0,0 +1,72 @@
+# nvidia-xconfig: X configuration file generated by nvidia-xconfig
+# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
+
+Section "ServerLayout"
+ Identifier "Layout0"
+ Screen 0 "Screen0"
+ InputDevice "Keyboard0" "CoreKeyboard"
+ InputDevice "Mouse0" "CorePointer"
+EndSection
+
+Section "Files"
+ RgbPath "/usr/X11R6/lib/X11/rgb"
+EndSection
+
+Section "Module"
+ Load "dbe"
+ Load "extmod"
+ Load "type1"
+ Load "freetype"
+ Load "glx"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Mouse0"
+ Driver "mouse"
+ Option "Protocol" "auto"
+ Option "Device" "/dev/psaux"
+ Option "Emulate3Buttons" "no"
+ Option "ZAxisMapping" "4 5"
+EndSection
+
+Section "InputDevice"
+ # generated from default
+ Identifier "Keyboard0"
+ Driver "keyboard"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ VendorName "Unknown"
+ ModelName "Unknown"
+ HorizSync 30.0 - 110.0
+ VertRefresh 50.0 - 150.0
+ Option "DPMS" "false"
+ Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
+ Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
+ ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
+ Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
+ ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
+EndSection
+
+Section "Device"
+ Identifier "Device0"
+ Driver "vmware"
+ VendorName "NVIDIA Corporation"
+ Option "DPI" "100 x 100"
+
+
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Device0"
+ Monitor "Monitor0"
+ DefaultDepth 24
+ SubSection "Display"
+ Depth 24
+ Modes "1280x720"
+ EndSubSection
+EndSection
+
diff --git a/abs/core-testing/LinHES-config/timezip.py b/abs/core-testing/LinHES-config/timezip.py
new file mode 100755
index 0000000..505b4a4
--- /dev/null
+++ b/abs/core-testing/LinHES-config/timezip.py
@@ -0,0 +1,185 @@
+#!/usr/bin/python
+# import MySQL module
+#used to import the zipcode/timezone/nfs info fromMBE
+import MySQLdb
+import sys
+import getopt
+import socket
+
+
+def usage():
+ print " -h --help"
+ print " -d --installdb"
+ print " -m --masterdb"
+ print " -n --hostname of current machine"
+
+def printvars():
+ print "masterdb: " + masterdb
+ print "installdb:" + installdb
+ print "hostname: " + thishostname
+ print "BEhostname:" + BEhostname
+ print "zipcode:" + zipcode
+ print "timezone:" + tz
+ print "nfsip:" + nfsip
+ print "nfstoggle:" + nfstoggle
+ print "nfsmount:" + nfsmount
+ print "hobbitclient:" + hobbitclient
+# connect
+def selectvars():
+
+ global BEhostname
+ global zipcode
+ global tz
+ global nfsip
+ global nfstoggle
+ global nfsmount
+ global hobbitclient
+
+ db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg")
+ # create a cursor
+ cursor = db.cursor()
+ # execute SQL statement
+ cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb))
+ result = cursor.fetchone()
+ BEhostname=result[0]
+
+ cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname))
+ result = cursor.fetchone()
+ try:
+ zipcode = result[0]
+ except TypeError:
+ zipcode=""
+
+ cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname))
+ result = cursor.fetchone()
+ try:
+ nfsip=result[0]
+ except TypeError:
+ nfsip=""
+
+ cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname))
+ result = cursor.fetchone()
+ try:
+ nfstoggle=result[0]
+ except TypeError:
+ nfstoggle=""
+
+ cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname))
+ result = cursor.fetchone()
+ try:
+ nfsmount=result[0]
+ except TypeError:
+ nfsmount=""
+
+ cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname))
+ result = cursor.fetchone()
+ try:
+ tz=result[0]
+ except TypeError:
+ tz=""
+
+ if ( thishostname != BEhostname ):
+ cursor.execute("select data from settings where value='GlobalServiceHobbitserver'")
+ result = cursor.fetchone()
+ try:
+ hobbitclient=result[0]
+ except TypeError:
+ hobbitclient="0"
+
+
+
+def insertvars():
+
+ db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg")
+ cursor = db.cursor()
+#inserting the zipcode
+ cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if ( zipcode!="" ):
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname))
+ print "inserting zipcode"
+ else:
+ cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname))
+ print "updating zipcode"
+
+#inserting the timezone
+ cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if ( tz != ""):
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname))
+ print "inserting timezone"
+ else:
+ cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname))
+ print "updating timezone"
+
+
+#start of NFSIP
+ cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if ( nfsip != ""):
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname))
+ print "inserting nfsip"
+
+ if (nfstoggle != ""):
+ cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname))
+ print "inserting nfstoggle"
+
+ if ( nfsmount !="") :
+ cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname))
+ print "inserting nfsmountpoint"
+
+#hobbitclient
+ cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname))
+ result = cursor.fetchone()
+ if ( tz != ""):
+ if (result == None):
+ cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname))
+ print "inserting hobbitcleint"
+ else:
+ cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname))
+ print "updating hobbitclient"
+
+
+def main(argv):
+ global masterdb
+ global installdb
+ global thishostname
+ thishostname=""
+ global BEhostname
+ global zipcode
+ global tz
+ global nfsip
+ global hobbitclient
+ try:
+ opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] )
+ except getopt.GetoptError:
+ sys.exit(2)
+ for opt, arg in opts:
+ if opt in ("-h", "--help"):
+ usage()
+ sys.exit()
+ elif opt in ( "-d" , "--installdb"):
+ installdb = arg
+ elif opt in ("-m", "--masterdb"):
+ masterdb = arg
+ elif opt in ("-n", "--hostname"):
+ thishostname = arg
+
+ if ( thishostname == "" ):
+ thishostname = socket.gethostname()
+
+ selectvars()
+ printvars()
+ insertvars()
+if __name__ == "__main__":
+ main(sys.argv[1:])
+
diff --git a/abs/core-testing/LinHES-config/timezone.bin b/abs/core-testing/LinHES-config/timezone.bin
new file mode 100755
index 0000000..a11d65a
Binary files /dev/null and b/abs/core-testing/LinHES-config/timezone.bin differ
diff --git a/abs/core-testing/LinHES-config/xconfig.sh b/abs/core-testing/LinHES-config/xconfig.sh
new file mode 100755
index 0000000..42603d6
--- /dev/null
+++ b/abs/core-testing/LinHES-config/xconfig.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+BASE=""
+. /etc/profile
+#TEMPLATES="/usr/share/templates"
+
+function Xvalues {
+ VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2`
+ echo $VGACARDTYPE
+ currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '`
+ }
+
+function presetupX {
+if [ x$XUseAdvanced = x1 ]
+then
+ if [ x$XIgnoreConfig = x1 ]
+ then
+ echo "Using User supplied X"
+ if [ -f $BASE/data/home/mythtv/templates/xorg.user ]
+ then
+ cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF
+ else
+ echo "Didn't find the file"
+ echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF
+ fi
+ else
+ setupAdvancedX
+ fi
+else
+ setupX
+fi
+
+}
+
+function setupAdvancedX {
+echo "#doing the advanced" > /tmp/options
+ Xcatagory=` echo $Xresadvanced |cut -d_ -f1`
+ Xres=` echo $Xresadvanced |cut -d_ -f2`
+ echo $Xcatagory
+ if [ x$Xcatagory = "xNvidia" ]
+ then
+ Xres=""
+ if [ $XnVidia1080p = "1" ]
+ then
+ Xres="${Xres} \"1920x1080_60\""
+ fi
+ if [ $XnVidia1080i = "1" ]
+ then
+ Xres="${Xres} \"1920x1080_60i\""
+ fi
+ if [ $XnVidia720p = "1" ]
+ then
+ Xres="${Xres} \"1280x720_60\""
+ fi
+ if [ $XnVidia480p = "1" ]
+ then
+ Xres="${Xres} \"720x480_60\""
+ fi
+ ML="\t Modes ${Xres}"
+ else
+
+ ML="\t Modes \"${Xres}\""
+ fi
+ echo $ML
+ case $Xcardtype in
+ NVIDIA|nVidia )
+
+ case $Xconnection in
+ DVI) ConnectedMonitor=DFP ;;
+ vga) ConnectedMonitor=CRT;;
+ Auto) ConnectedMonitor=Auto;;
+ TV) ConnectedMonitor=TV
+ echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options
+ echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options
+ ;;
+ esac
+ if [ $ConnectedMonitor = Auto ]
+ then
+ echo "auto connection"
+ else
+ echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options
+ echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options
+ echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options
+ fi
+
+ if [ x$XignoreEDID = x1 ]
+ then
+ EDIDvalue=true
+ EDIDFREQ=false
+ DS=" DisplaySize $XDisplaysize"
+ HS=" HorizSync $XHsync"
+ VR=" VertRefresh $XVrefresh"
+ else
+ EDIDvalue=false
+ EDIDFREQ=true
+ DS="# Display size edid used "
+ HS="#Hsync edid used "
+ VR="#Vertrefresh edid used "
+
+ fi
+ echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options
+ echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options
+
+
+ sed -e "s/^.*Modes.*$/${ML}/" \
+ -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \
+ -e "s/^.*DisplaySize.*$/ $DS/" \
+ -e "s/^#.*HorizSync.*$/ $HS/g" \
+ -e "s/^#.*VertRefresh.*$/ $VR/g" \
+ -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF
+
+ ;;
+ ati|ATI)
+ case $Xconnection in
+ DVI) ConnectedMonitor="tmds1,nocrt1,notv";;
+ VGA) ConnectedMonitor="crt1,notmds1,notv" ;;
+ TV) ConnectedMonitor="tv,nocrt1,notmds1"
+ echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options
+ echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options
+ ;;
+
+ esac
+
+
+ if [ x$XignoreEDID = x1 ]
+ then
+ DS=" DisplaySize $XDisplaysize"
+ HS=" HorizSync $XHsync"
+ VR=" VertRefresh $XVrefresh"
+ else
+ DS="# Display size edid used "
+ HS="#Hsync edid used "
+ VR="#Vertrefresh edid used "
+
+ fi
+
+ echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options
+
+ sed -e "s/^.*Modes.*$/\t $ML/" \
+ -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \
+ -e "s/^.*DisplaySize.*$/ $DS/" \
+ -e "s/^#.*HorizSync.*$/ $HS/g" \
+ -e "s/^#.*VertRefresh.*$/ $VR/g" \
+ -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF
+ ;;
+
+ via|VIA|Via) echo "no via here"
+ ;;
+
+ *)
+ echo "unknown card type"
+ ;;
+ esac
+}
+
+
+
+function setupX {
+ Xvalues
+ echo "$currentmode ____ ${Xres}"
+ #if [ ! x${currentmode} = x\"${Xres}\" ]
+ if [ x = x ]
+ then
+ case $VGACARDTYPE in
+ nVidia )
+ sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF
+ if [ ! x$TESTMODE = "xtest" ]
+ then
+ pacman --noconfirm -R libgl-dri
+# pacman --noconfirm -S nvidia-STB nvidia-utils
+ pacman --noconfirm -S nvidia nvidia-utils
+ fi
+ ;;
+ VMware )
+ sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF
+ ;;
+
+ VIA )
+ sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF
+ if [ ! x$TESTMODE = "xtest" ]
+ then
+ pacman --noconfirm -R nvidia-STB nvidia-utils
+ pacman --noconfirm -S libgl-dri
+ fi
+
+ ;;
+ Intel)
+ sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF
+ if [ ! x$TESTMODE = "xtest" ]
+ then
+ pacman --noconfirm -Rd nvidia-utils
+ pacman --noconfirm -S libgl-dri
+ fi
+ ;;
+
+ *) #XCONF=`hwd -x |grep etc`
+ XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-`
+
+
+ cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF
+ ;;
+ esac
+ fi
+
+}
+
+#MAIN
+TESTMODE=$1
+if [ x$TESTMODE = "xtest" ]
+then
+ XORG_CONF="/tmp/xorg.conf.test"
+ XUseAdvanced="1"
+ XIgnoreConfig="${2}"
+ Xcardtype="${3}"
+ XIgnoreEDID="${4}"
+ Xconnection="${5}"
+ XHsync="${6}"
+ XVrefresh="${7}"
+ Xresadvanced="${8}"
+ XTVstandard="${9}"
+ XTVconnection="${10}"
+ XDisplaysize="${11}"
+else
+ if [ -f /etc/systemconfig ]
+ then
+ . /etc/systemconfig
+ else
+ Xres="800x600"
+ fi
+ XORG_CONF="/etc/X11/xorg.conf"
+fi
+presetupX
+
+
diff --git a/abs/core-testing/live-installer/LinHES-release b/abs/core-testing/live-installer/LinHES-release
deleted file mode 100644
index a4de764..0000000
--- a/abs/core-testing/live-installer/LinHES-release
+++ /dev/null
@@ -1 +0,0 @@
-LinHES R6.00.02
diff --git a/abs/core-testing/live-installer/MythVantage.sh b/abs/core-testing/live-installer/MythVantage.sh
deleted file mode 100755
index 286c908..0000000
--- a/abs/core-testing/live-installer/MythVantage.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-export MV_ROOT=/usr/MythVantage
-export PATH=$PATH:$MV_ROOT/bin
-export TEMPLATES=$MV_ROOT/templates
diff --git a/abs/core-testing/live-installer/PKGBUILD b/abs/core-testing/live-installer/PKGBUILD
deleted file mode 100755
index b8fc206..0000000
--- a/abs/core-testing/live-installer/PKGBUILD
+++ /dev/null
@@ -1,62 +0,0 @@
-pkgname=live-installer
-pkgver=1.0
-pkgrel=93
-pkgdesc="Install and configure your system"
-depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan)
-arch=('i686')
-
-source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh)
-
-install=live.install
-build() {
- mkdir -p $startdir/pkg/etc
- mkdir -p $startdir/pkg/usr/share/mythtv/themes/default
-
- MVDIR=$startdir/pkg/usr/MythVantage
- mkdir $startdir/pkg/etc/profile.d
- install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh
- mkdir -p $MVDIR/bin
- mkdir -p $MVDIR/templates
- mkdir -p $MVDIR/etc
-
-#copy in all the installer specific stuff
- rsync -r --exclude=.svn ../templates $MVDIR/
- install -m0700 myth_user_call $MVDIR/bin/myth_user_call
- install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh
- install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh
- install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh
- install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh
-# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh
- install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh
- install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh
- install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh
- install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh
- install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh
- install -m 0755 create_master.sh $MVDIR/bin/create_master.sh
- install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh
- install -m 0755 timezone.bin $MVDIR/bin/timezone.bin
- install -m 0755 timezip.py $MVDIR/bin/timezip.py
- install -m 0755 autocard.py $MVDIR/bin/autocard.py
-
- mkdir -p $startdir/pkg/usr/bin
- install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py
- #copy in the branding stuff
- install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release
- install -m 0755 issue $startdir/pkg/etc/issue
-
-# copy over the ui files
- install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/
-
-#copy in the binaries
- #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage
- install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage
- cd $MVDIR/bin
- ln -s MythVantage mythvantage
- ln -s MythVantage mythinstall
- cd -
-# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect
-
-# install -m 0755 startx $startdir/pkg/root/startx
-# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh
-}
-
diff --git a/abs/core-testing/live-installer/add_service.sh b/abs/core-testing/live-installer/add_service.sh
deleted file mode 100755
index 190d604..0000000
--- a/abs/core-testing/live-installer/add_service.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-SERVICE_DIR=/var/service
-SCRIPT_DIR=/etc/sv
-if [ -d $SCRIPT_DIR/$1 ]
-then
- if [ -d $SERVICE_DIR/$1 ]
- then
- echo "$1 already there"
- else
- ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1
- echo "adding $1"
- fi
-else
- echo "couldn't find $SCRIPT_DIR/$1"
-fi
diff --git a/abs/core-testing/live-installer/autocard.py b/abs/core-testing/live-installer/autocard.py
deleted file mode 100755
index b59b8d6..0000000
--- a/abs/core-testing/live-installer/autocard.py
+++ /dev/null
@@ -1,302 +0,0 @@
-#!/usr/bin/python
-# import MySQL module
-#jm
-import MySQLdb
-import sys
-import getopt
-import socket
-import os
-import time
-import string
-import glob
-from string import letters
-from string import digits
-
-def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor):
- global currenthostname
- print Device
- print Driver,
- print Cardvendor
- cursor = db.cursor()
- insert = "false"
- if Driver == "ivtv" :
- cardtype="MPEG"
- defaultinput="Tuner 1"
- insert="true"
- if Cardvendor == "pcHDTV HD3000 HDTV":
- insert="false"
- cardtype ="whocares"
-
- #print insert
- if insert == "true" :
- cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname))
-
-def INSERTHDR_INTOMYTH(deviceid,tuner_number):
- cardtype='HDHOMERUN'
- defaultinput='MPEG2TS'
- global currenthostname
- print deviceid
- print cardtype
- print defaultinput
- print tuner_number
- cursor = db.cursor()
- #print insert
- cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname))
-
-def INSERTAUTOCARD():
- global cardlist
- global currenthostname
- # create a cursor
- cursor = db.cursor()
-
-
- for i in range( 1 , len(cardlist)):
- insert = "false"
-# print cardlist[i]
- Device=cardlist[i][0]
- Driver=cardlist[i][1]
- Cardvendor=cardlist[i][2]
- Businfo=cardlist[i][3]
- if Driver == "ivtv" :
- insert="true"
- devicestatus="unused"
- if Cardvendor == "pcHDTV HD3000 HDTV":
- insert="false"
- cardtype ="whocares"
- if Driver == "hdr":
- insert="true"
- devicestatus="unused"
-
- if insert == "true" :
- cursor.execute("delete from autocard where uniqid=%s;",(Businfo))
- if Driver=="hdr":
- Cardvendor="HDHOMERUN Tuner 1"
- cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
- Cardvendor="HDHOMERUN Tuner 2"
- cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
-
- else:
- cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname))
-
-
-
-def PRINTINFO():
- global cardlist
-
- for list in cardlist:
- if list != "_placeholder_":
- print list
- #print "-------------"
-
-def GATHER_HDR():
- global cardlist
- command="/usr/bin/hdhomerun_config --discover"
- results=os.popen(command,'r')
- line=results.readline()
- if line.strip().split()[0] == "no":
- print "HDHOMERUN not detected"
- else:
- print line
- hdrdevice=line.strip().split()[2]
- print hdrdevice
- Driver="hdr"
- Device=hdrdevice
- Cardtype="HDHOMERUN"
- Businfo=hdrdevice
- cardprops = [Device,Driver , Cardtype , Businfo]
- cardlist.append(cardprops)
-
-
-def GATHER_v4l_CARDS():
- global cardlist
- cardlist=["_placeholder_"]
- # print "Looking for v4l cards"
- try:
- filelist = os.listdir('/dev/v4l/')
- except OSError:
- filelist=" "
- #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0']
- #cardlist.append(fakelist)
- try:
- filelist = glob.glob("/dev/v4l/video?")
- Driver=""
- Cardtype=""
- Businfo=""
- numcards = 0
- for Device in filelist:
- #print card
- numcards = numcards+1
- cmd = 'v4l2-ctl -D -d' + Device
- for line in os.popen(cmd).readlines():
- #print line
- pos = string.find(line,"Driver name")
- if pos >=0:
- splitline= line.split(':')
- Driver=splitline[1].strip()
- pos = string.find(line,"Card type")
- if pos >=0:
- splitline= line.split(':')
- Cardtype=splitline[1].strip()
-
- pos = string.find(line,"Bus info")
- if pos >=0:
- splitline= line.split(':',1)
- Businfo=splitline[1].strip()
-
- #print Device,Driver , Cardtype , Businfo,numcards
- cardprops = [Device,Driver , Cardtype , Businfo]
- cardlist.append(cardprops)
- except IOError:
- print "no v4l cards found"
- sys.exit(2)
-
-
-def WRITEUDEV_IVTV():
- global insertmyth
- cursor = db.cursor()
- #add ivtv,cid lookup loop through until empty.
- cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'")
- cidrows = cursor.fetchall()
- for row in cidrows:
- cid=row[0]
- cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid))
- result = cursor.fetchone()
- description=result[2]
- driver='DRIVERS==\"ivtv\"'
- ATTRNAME='ATTR{name}=="ivtv? encoder MPG"'
- KERNELS='KERNELS==\"'
- KERNELS+=cid
- KERNELS+="\""
- #filter out non digit or chars
- keep=letters.join(digits)
- description=filter(lambda c: c in keep, description)
- devnode="ivtv/"
- #devnode+=description + "_"
- udevcid=cid.partition(":")
- devnode+=udevcid[2]
- devnode+="_video"
- UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"'
- print "Here is the udev rule"
- print UDEV_RULE
- filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules'
- file = open(filename,'w')
- file.write(UDEV_RULE)
- if ( insertmyth == "true"):
- devnode="/dev/"+devnode
- INSERTCARD_INTOMYTH(devnode,"ivtv",description)
- cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid))
-#now insert HDR
- cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'")
- cidrows = cursor.fetchall()
- for row in cidrows:
- if ( insertmyth == "true"):
- deviceid=row[0]
- #cardtype="HDHOMRUN"
- #defaultinput="MPEG2TS"
- dbox2_port=row[1]
- tuner_number=dbox2_port.rpartition(' ')[2]
- INSERTHDR_INTOMYTH(deviceid,tuner_number)
- cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port))
-
-
-
-def CLEARAUTOCARD():
- cursor = db.cursor()
- cursor.execute("delete from autocard")
-
-def RELOADUDEV():
- print "relaoding udev rules"
- os.system('udevcontrol reload_rules')
- os.system('rmmod ivtv')
- os.system('udevtrigger')
-
-
-def usage():
- print " -h help"
- print " -g gather and print out the found cards"
- print " -w write out the udev rules"
- print " -i insert cards into myth that are marked will-add(only used with -w)"
- print " -r reload udev rules"
- print " -c clear the autocard db"
-
-def main(argv):
- global db
- global cardlist
- global currenthostname
- currenthostname=""
- writeudev="false"
- global insertmyth
- insertmyth ="false"
-
- db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg")
- try:
- cursor = db.cursor()
- cursor.execute("describe autocard;")
- except MySQLdb.Error, e:
- cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));")
- print "table created"
-
- if ( currenthostname == "" ):
- currenthostname = socket.gethostname()
-
-
- try:
- opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] )
- except getopt.GetoptError:
- sys.exit(2)
- for opt, arg in opts:
- if opt in ("-h", "--help"):
- usage()
- sys.exit()
- elif opt in ( "-g" , "--gathercards"):
- GATHER_v4l_CARDS()
- GATHER_HDR()
- INSERTAUTOCARD()
- PRINTINFO()
- elif opt in ("-w", "--writeudev"):
- writeudev="true"
- elif opt in ("-i", "--insert"):
- insertmyth="true"
- elif opt in ( "-r" , "--reloadudev"):
- RELOADUDEV()
- elif opt in ( "-c" , "--clearautocard"):
- CLEARAUTOCARD()
-
-
- if ( writeudev == "true"):
- WRITEUDEV_IVTV()
-
-
-
-
-
-
-if __name__ == "__main__":
- main(sys.argv[1:])
-
-
-
-
-
-#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));
-#Query OK, 0 rows affected (0.14 sec)
-
-#mysql> describe autocard;
-#+--------------+-------------+------+-----+---------+-------+
-#| Field | Type | Null | Key | Default | Extra |
-#+--------------+-------------+------+-----+---------+-------+
-#| dev | varchar(50) | YES | | NULL | |
-#| driver | varchar(50) | YES | | NULL | |
-#| description | varchar(50) | YES | | NULL | |
-#| uniqid | varchar(50) | YES | | NULL | |
-#| devicestatus | varchar(50) | YES | | NULL | |
-#| hostname | varchar(50) | YES | | NULL | |
-#+--------------+-------------+------+-----+---------+-------+
-
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/bpopup-ui.xml b/abs/core-testing/live-installer/bpopup-ui.xml
deleted file mode 100755
index df0598b..0000000
--- a/abs/core-testing/live-installer/bpopup-ui.xml
+++ /dev/null
@@ -1,164 +0,0 @@
-<!--
-
- This is a myth style theme file for mythwelcome
-
- (c) 2005 by a whole bunch of people associated with MythTV
-
--->
-<mythuitheme>
-
- <window name="welcome_screen">
-
- <!--
-
- First, define all the fonts we need on this screen
-
- -->
- <font name="title" face="Arial">
- <color>#ffff00</color>
- <dropcolor>#000000</dropcolor>
- <size>24</size>
- <shadow>3,3</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="time" face="Arial">
- <color>#9999cc</color>
- <size>18</size>
- <bold>yes</bold>
- </font>
-
- <font name="label" face="Arial">
- <color>#ffff00</color>
- <dropcolor>#000000</dropcolor>
- <size>18</size>
- <shadow>3,3</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="info" face="Arial">
- <color>#ffffff</color>
- <size>18</size>
- <bold>yes</bold>
- </font>
-
- <font name="biginfo" face="Arial">
- <color>#ffffff</color>
- <size>50</size>
- <bold>yes</bold>
- </font>
- <font name="warning" face="Arial">
- <color>#ff0000</color>
- <dropcolor>#000000</dropcolor>
- <size>16</size>
- <shadow>2,2</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="buttons" face="Arial">
- <color>#ffff00</color>
- <size>14</size>
- <bold>yes</bold>
- </font>
-
- <container name="main_display">
- <area>0,0,800,600</area>
-
- <textarea name="title" draworder="0" align="center">
- <multiline>no</multiline>
- <font>title</font>
- <area>50,40,700,40</area>
- <value></value>
- </textarea>
-
- <!--
- time
- -->
- <textarea name="time_text" draworder="0" align="right">
- <multiline>no</multiline>
- <font>time</font>
- <area>660,520,110,30</area>
- <value></value>
- </textarea>
-
- <textarea name="date_text" draworder="0" align="center">
- <multiline>no</multiline>
- <font>time</font>
- <area>0,60,800,70</area>
- <value></value>
- </textarea>
-
- <!--
- current myth status
- -->
-
- <textarea name="status_text" draworder="1" align="center">
- <multiline>yes</multiline>
- <font>info</font>
- <area>20,70,760,60</area>
- <value>MythTV is idle and will shutdown shortly.</value>
- </textarea>
-
- <!--
- current recordings status
- -->
-
- <textarea name="recording_label" draworder="1" align="center">
- <font>label</font>
- <area>20,110,760,30</area>
- <!--<value>Percent Complete </value>-->
- <value></value>
- </textarea>
-
- <textarea name="recording_text" draworder="1" align="hcenter">
- <multiline>yes</multiline>
- <font>biginfo</font>
- <area>20,110,760,150</area>
- <value></value>
- </textarea>
-
- <!--
- next scheduled recording status
- -->
-
- <textarea name="scheduled_label" draworder="1" align="center">
- <font>label</font>
- <area>20,320,760,30</area>
- <value></value>
- </textarea>
-
- <textarea name="scheduled_text" draworder="1" align="hcenter">
- <multiline>yes</multiline>
- <font>biginfo</font>
- <area>20,400,760,120</area>
- <value></value>
- </textarea>
-
- <!--
- scheduled recordings conflict warning
- -->
-
- <textarea name="conflicts_text" draworder="1" align="center">
- <font>warning</font>
- <area>20,490,760,30</area>
- <value>WARNING: There are conflicting scheduled recordings!</value>
- </textarea>
-
- <!--
- start frontend button
-
- <textbutton name="startfrontend_button" draworder="1">
- <position>81,535</position>
- <font>buttons</font>
- <image function="on" filename="mw_text_button_on.png"></image>
- <image function="off" filename="mw_text_button_off.png"></image>
- <image function="pushed" filename="mw_text_button_pushed.png"></image>
- </textbutton>
-
- -->
-
- </container>
-
- </window>
-
-</mythuitheme>
diff --git a/abs/core-testing/live-installer/build_diskless.sh b/abs/core-testing/live-installer/build_diskless.sh
deleted file mode 100755
index 4dfd5fc..0000000
--- a/abs/core-testing/live-installer/build_diskless.sh
+++ /dev/null
@@ -1,143 +0,0 @@
-#!/bin/bash
-#CD=/mnt/cd
-. /etc/profile
-. /etc/systemconfig
-
-TFTP=/data/srv/tftp
-CD=/data/srv/tftp/live
-DESTCD=/data/srv/tftp/CD
-BASE=/data/srv/tftp/masterbuild
-
-MODULES=$DESTCD/MythVantage/base/
-myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/
-
-function log () {
-echo $1
-}
-
-function check_xvfb () {
-export DISPLAY=127.0.0.1:25
- Xvfb -ac :25 &
-
-}
-
-
-function create_base_image() {
-echo $SRCFILES
-if [ -f $SRCFILES/data.lzm ]
-then
- mkdir $HOST_IMG_DIR
- cd $SRCFILES
- echo "Creating image.." > $BASE/tmp/.install_state
- LIST=`ls *.lzm`
- for i in $LIST
- do
- echo $i
- echo $i > $BASE/tmp/.install_percent
- lzm2dir $i \/$HOST_IMG_DIR
- done
-
- for i in sys proc dev tmp
- do
- mkdir /$HOST_IMG_DIR/$i
- done
-
- chmod 777 /$HOST_IMG_DIR/tmp
- mknod /$HOST_IMG_DIR/dev/null c 1 3
- mknod /$HOST_IMG_DIR/dev/null c 1 5
- mknod /$HOST_IMG_DIR/dev/console c 5 1
- chmod +s /$HOST_IMG_DIR/usr/bin/Xorg
- chmod +s /$HOST_IMG_DIR/usr/bin/crontab
- chmod +s /$HOST_IMG_DIR/usr/bin/sudo
- chmod +s /$HOST_IMG_DIR/bin/mount
- #copy fstab from masterbuild
- cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab
- echo "Done: installing data" > $BASE/tmp/.install_state
- return 0
-else
- echo "Error: no modules" > $BASE/tmp/.install_state
- log "couldn't find modules to install"
- return 1
-fi
-}
-
-function configure_image () {
- echo "Configuring system" > $BASE/tmp/.install_state
- cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig
- chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
- chmod 775 "$HOST_IMG_DIR" /etc/systemconfig
- cp /etc/mtab $HOST_IMG_DIR/etc/mtab
- mount --bind /dev $HOST_IMG_DIR/dev
-
- chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
-#copy syssettings template to here.
- SE=$BASE$TEMPLATES/settings/syssettings
- mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
- cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings
- chown root:mythtv $HOST_IMG_DIR/etc/systemconfig
- chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
- chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings
-#update remotedb with this host settings
- OLDDISPLAY=$DISPLAY
- check_xvfb
- chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1
- chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- if [ ! $? = 0 ]
- then
- touch $mountpoint/tmp/.dbsysfailed
- chmod 777 $mountpoint/tmp/.dbsysfailed
- else
- #Run second time
- chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install
- chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- fi
-chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
-cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf
-echo "Done" > $BASE/tmp/.install_state
-DISPLAY=$OLDDISPLAY
-
-#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/
-}
-
-function create_tftp_boot () {
-
- CFGFILE=$TFTP/pxelinux.cfg/01-$2
- echo "DEFAULT mythfe" > $CFGFILE
- echo "LABEL mythfe" >> $CFGFILE
- echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE
- echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE
- echo "TIMEOUT 2" >> $CFGFILE
-}
-
-function create_nfs_export () {
-echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports
-exportfs -arv
-}
-
-#-------------------------------------------------------------------------------MAIN PROGRAM ---------------------------------------------------------------------
-if [ x$1 = x -o x$2 = x ]
-then
- echo "usage: hostname macaddress"
- exit 1
-fi
-
-image_name=$1
-mac_address=`echo $2| tr "[:upper:]" "[:lower:]"`
-
-echo "using image_name of $image_name"
-echo "using mac_address of $mac_address"
-
-HOST_IMG_DIR=$TFTP/$1
-
-create_base_image $image_name
-configure_image
-umount $HOST_IMG_DIR/dev
-create_tftp_boot $image_name $mac_address
-create_nfs_export $image_name
-
-
-
-
-#create_dhcp_entry $mac_address
-
diff --git a/abs/core-testing/live-installer/checkout_MythVantage.sh b/abs/core-testing/live-installer/checkout_MythVantage.sh
deleted file mode 100755
index 764e418..0000000
--- a/abs/core-testing/live-installer/checkout_MythVantage.sh
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/bash
-MYDIR=`pwd`
-MYTHPATH="\/data\/LinHES-PKGBUILD\/abs\/core-testing\/mythtv\/stable\/mythtv\/src\/mythtv-0.21"
-
-function setup_links {
-rm mythinstall.bin
-rm mythbeselect.bin
-ln -s $MYDIR/src/MythVantage-app/mythinstall/mythinstall ./mythinstall.bin
-ln -s $MYDIR/src/MythVantage-app/mythbeselect/mythbeselect ./mythbeselect.bin
-}
-
-function dl_repo {
-mkdir src
-cd src
-if [ ! -d MythVantage-app ]
-then
- git clone http://mythvantage.com/MythVantage-app.git/
- cd MythVantage-app
- git checkout --track -b LinHES origin/LinHES
- cd $MYDIR
- setup_links
- cd -
-else
- echo "updating exisiting tree"
- cd MythVantage-app
- git pull
- git checkout master
- git merge
- cd -
-fi
-
-cd MythVantage-app
-git checkout master
-#git checkout origin/LinHES
-
-}
-
-dl_repo
-sed -i "s/^MYTHPATH.*$/MYTHPATH\=\"$MYTHPATH\"/g" $MYDIR/src/MythVantage-app/mythinstall/mythinstall.pro
-sed -i "s/#define __MVAPP__/\/\/#define __MVAPP__/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h
-sed -i "s/mythvantage/LinHES/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h
-
-cd $MYDIR/src/MythVantage-app/mythinstall && qmake
-make || exit 1
-cd $MYDIR/src/MythVantage-app/mythbeselect && qmake
-make ||exit 1
-
diff --git a/abs/core-testing/live-installer/create_master.sh b/abs/core-testing/live-installer/create_master.sh
deleted file mode 100755
index 1e641b4..0000000
--- a/abs/core-testing/live-installer/create_master.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-#CD=/mnt/cd
-CD=/data/srv/tftp/live
-DESTCD=/data/srv/tftp/CD
-DEST=/data/srv/tftp/masterbuild
-MODULES=$DESTCD/MythVantage/base/
-myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
-
-mkdir -p $DESTCD
-mkdir -p $DEST
-
-mount $CD
-status=0
-if [ -f $CD/MythVantage/base/data.lzm ]
-then
- status=0
-else
- status=1
-fi
-if [ x$status = x0 ]
-then
- echo "copying to disk"
- cp -rp $CD/* $DESTCD
- cd $MODULES
- for i in *.lzm
- do
- echo $i
- lzm2dir $i \/$DEST
- done
- for i in sys proc dev tmp
- do
- mkdir $DEST/$i
- done
- chmod 777 /$DEST/tmp
- mknod $DEST/dev/null c 1 3
- mknod $DEST/dev/null c 1 5
- mknod $DEST/dev/console c 5 1
- chmod +s $DEST/usr/bin/Xorg
- chmod +s $DEST/usr/bin/crontab
- chmod +s $DEST/usr/bin/sudo
- chmod +s $DEST/bin/mount
-fi
-if [ ! -f $DEST/etc/fstab.bak ]
-then
- cp $DEST/etc/fstab $DEST/etc/fstab.bak
-fi
-tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab
-echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab
-echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports
-
-
-exportfs -arv
-
-#copy in the modules
-mkdir -p $DEST/mnt/live/mnt/
-mv $DESTCD/* $DEST/mnt/live/mnt/
-
diff --git a/abs/core-testing/live-installer/file_time_offset.py b/abs/core-testing/live-installer/file_time_offset.py
deleted file mode 100755
index f2973d0..0000000
--- a/abs/core-testing/live-installer/file_time_offset.py
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/usr/bin/python
-
-
-import time
-import os
-import glob
-import getopt
-import sys
-def main(argv):
- filecount=0
-# root = "/tmp"
-# offset = 4
- now = int(time.time())
-
-
- try:
- opts, args = getopt.getopt(argv, "hs:d:")
- except getopt.GetoptError:
- sys.exit(2)
- for opt, arg in opts:
- if opt in ("-h", "--help"):
- print "-s seconds -d /testdir"
- print "default if 4 seconds"
- sys.exit()
- elif opt in ( "-s" ):
- offset = int(arg)
- elif opt in ("-d"):
- root = arg
-
- for item in glob.glob(root+"/*"):
- lastmodDate = os.path.getmtime(item)
- tdiff= now-lastmodDate
- #print tdiff, offset
-
- if tdiff > offset:
- filecount+=1
- print filecount
-if __name__ == "__main__":
- main(sys.argv[1:])
diff --git a/abs/core-testing/live-installer/install-ui.xml b/abs/core-testing/live-installer/install-ui.xml
deleted file mode 100755
index 0ec9ddb..0000000
--- a/abs/core-testing/live-installer/install-ui.xml
+++ /dev/null
@@ -1,175 +0,0 @@
-<!--
-
- This is a myth style theme file for mythwelcome
-
- (c) 2005 by a whole bunch of people associated with MythTV
-
--->
-<mythuitheme>
-
- <window name="welcome_screen">
-
- <!--
-
- First, define all the fonts we need on this screen
-
- -->
- <font name="title" face="Arial">
- <color>#ffff00</color>
- <dropcolor>#000000</dropcolor>
- <size>24</size>
- <shadow>3,3</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="time" face="Arial">
- <color>#9999cc</color>
- <size>18</size>
- <bold>yes</bold>
- </font>
-
- <font name="label" face="Arial">
- <color>#ffff00</color>
- <dropcolor>#000000</dropcolor>
- <size>18</size>
- <shadow>3,3</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="info" face="Arial">
- <color>#ffffff</color>
- <size>18</size>
- <bold>yes</bold>
- </font>
-
- <font name="biginfo" face="Arial">
- <color>#ffffff</color>
- <size>50</size>
- <bold>yes</bold>
- </font>
- <font name="warning" face="Arial">
- <color>#ff0000</color>
- <dropcolor>#000000</dropcolor>
- <size>16</size>
- <shadow>2,2</shadow>
- <bold>yes</bold>
- </font>
-
- <font name="buttons" face="Arial">
- <color>#ffff00</color>
- <size>14</size>
- <bold>yes</bold>
- </font>
- <font name="tinyinfo" face="Arial">
- <color>#9999cc</color>
- <size>12</size>
- <bold>no</bold>
- </font>
-
- <container name="main_display">
- <area>0,0,800,600</area>
-
- <textarea name="title" draworder="0" align="center">
- <multiline>no</multiline>
- <font>title</font>
- <area>50,40,700,40</area>
- <value>LinHes: The Linux Home Entertainment System </value>
- </textarea>
-
- <!--
- time
- -->
- <textarea name="time_text" draworder="0" align="right">
- <multiline>no</multiline>
- <font>time</font>
- <area>660,520,110,30</area>
- <value></value>
- </textarea>
-
- <textarea name="date_text" draworder="0" align="hcenter">
- <multiline>yes</multiline>
- <font>time</font>
- <area>20,75,740,100</area>
- <value></value>
- </textarea>
-
- <!--
- current myth status
- -->
-
- <textarea name="status_text" draworder="1" align="center">
- <multiline>yes</multiline>
- <font>info</font>
- <area>20,100,760,60</area>
- <value>MythTV is idle and will shutdown shortly.</value>
- </textarea>
-
- <!--
- current recordings status
- -->
-
- <textarea name="recording_label" draworder="1" align="center">
- <font>label</font>
- <area>20,140,760,30</area>
- <!--<value>Percent Complete </value>-->
- <value></value>
- </textarea>
-
- <textarea name="recording_text" draworder="1" align="hcenter">
- <multiline>yes</multiline>
- <font>biginfo</font>
- <area>20,140,760,150</area>
- <value></value>
- </textarea>
-
- <!--
- next scheduled recording status
- -->
-
- <textarea name="scheduled_label" draworder="1" align="center">
- <font>label</font>
- <area>20,320,760,30</area>
- <value></value>
- </textarea>
-
- <textarea name="scheduled_text" draworder="1" align="hcenter">
- <multiline>yes</multiline>
- <font>biginfo</font>
- <area>20,400,760,120</area>
- <value></value>
- </textarea>
-
- <textarea name="mythvantage_text" draworder="1" align="right">
- <multiline>no</multiline>
- <font>tinyinfo</font>
- <area>20,560,760,30</area>
- <value></value>
- </textarea>
- <!--
- scheduled recordings conflict warning
- -->
-
- <textarea name="conflicts_text" draworder="1" align="center">
- <font>warning</font>
- <area>20,490,760,30</area>
- <value>WARNING: There are conflicting scheduled recordings!</value>
- </textarea>
-
- <!--
- start frontend button
-
- <textbutton name="startfrontend_button" draworder="1">
- <position>81,535</position>
- <font>buttons</font>
- <image function="on" filename="mw_text_button_on.png"></image>
- <image function="off" filename="mw_text_button_off.png"></image>
- <image function="pushed" filename="mw_text_button_pushed.png"></image>
- </textbutton>
-
- -->
-
- </container>
-
- </window>
-
-</mythuitheme>
diff --git a/abs/core-testing/live-installer/install_db_chroot.sh b/abs/core-testing/live-installer/install_db_chroot.sh
deleted file mode 100755
index 514dd3c..0000000
--- a/abs/core-testing/live-installer/install_db_chroot.sh
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. /etc/systemconfig
-#myhost=`cat /etc/hostname`
-myhost=$hostname
-hostname $myhost
-mount -t proc none /proc
-pacman --noconfirm -Sf mysql
-/etc/rc.d/mysqld
-
-status=1
-mysqlstatus=1
-while [ ! $status = 0 ]
-do
- /etc/rc.d/mysqld stop
- sleep 1
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql -e "show databases;"
- showstatus=$?
- if [ $showstatus = 0 ]
- then
- pacman --noconfirm -R mythdb-initial
- pacman --noconfirm -S mythdb-initial
- $MV_ROOT/bin/restore_default_settings.sh -c load
- DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1
- $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install
- if [ $SystemType = "Master_backend" ]
- then
- $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
- fi
- #update database to allow user jobs on this host.
- $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
- $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- #if [ -d /data/srv/mysql/mythconverg ]
- if [ -d /var/lib/mysql/mythconverg ]
- then
- # pacman --noconfirm -R webcalendar
- # pacman --noconfirm --nodeps -S webcalendar
- status=0
- fi
- fi
- fi
-done
-#/etc/rc.d/mysqld stop
-#umount /proc
-
-
-
diff --git a/abs/core-testing/live-installer/install_functions.sh b/abs/core-testing/live-installer/install_functions.sh
deleted file mode 100755
index e5912da..0000000
--- a/abs/core-testing/live-installer/install_functions.sh
+++ /dev/null
@@ -1,449 +0,0 @@
-#!/bin/bash
-. /etc/profile
-disk=$2
-mountpoint=new_boot
-
-#-------------------------------------------
-MYTHDBUSER=mythtv
-MYTHTVPASSWD=mythtv
-CMDLINE=$(cat /proc/cmdline)
-hostname=`hostname`
-MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec"
-BASE=""
-
-function update_db_settings () {
-
- $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";"
-}
-
-function random_theme () {
-THEMES="basic-blue
-basic-green
-basic-red
-basic-purple
-basic-amber"
-
-theme=($THEMES) # Read into array variable.
-
-num_themes=${#theme[*]} # Count how many elements.
-
-pick=${theme[$((RANDOM%num_themes))]}
-echo "Selected $pick as the theme"
-update_db_settings Theme "$pick"
-}
-
-
-function setupremote {
- mv -f $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` 2>/dev/null
- if [ -d $TEMPLATES/remotes/$Remotetype ]
- then
- cd $TEMPLATES/remotes/$Remotetype
- for i in lircd*
- do
- cat $i >> $BASE/etc/lircd.conf
- done
- cp -f lircrc* $BASE/etc/lircrc
- chmod 755 /etc/lircrc
- update_db_settings HostRemoteType "$Remotetype"
- /usr/sbin/lircd -d /dev/lirc0
- mkdir /root/.mythtv
- ln -s /etc/lircrc /root/.mythtv/lircrc
- fi
-}
-
-function scan_for_usb_remote () {
-echo "Scanning for usb receiver/remote"
-while read line
-do
- USBID=`echo "$line"|cut -d"|" -f1`
- lsusb -d "$USBID" > /dev/null 2>/dev/null
- if [ $? = 0 ]
- then
- Remotetype=`echo "$line"|cut -d"|" -f2`
- echo "found $Remotetype"
- setupremote
- break
- fi
-done <$BASE/$TEMPLATES/remotes/receiver_usb.id
-}
-
-function rest_of_network () {
- #netmask
- echo $CMDLINE | grep -q netmask
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*netmask=}
- NETMASK=${TEMPVAR%% *}
- /sbin/ifconfig eth0 $IP netmask $NETMASK
- nm=`/usr/bin/nmconv.py -obits $NETMASK`
- NETMASK="/$nm $NETMASK"
- echo $NETMASK
- update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK"
- else
- echo "netmask not found"
- fi
- #gateway
- echo $CMDLINE | grep -q gateway
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*gateway=}
- GATEWAY=${TEMPVAR%% *}
- /sbin/route add default gw $GATEWAY
- update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY"
-
- else
- echo "gateway not found"
- fi
-
- #dns
- echo $CMDLINE | grep -q dns
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*dns=}
- DNS=${TEMPVAR%% *}
- echo "nameserver $DNS" >> /etc/resolv.conf
- update_db_settings HostDNS${MYTHDEFAULT} "$DNS"
- else
- echo "DNS not found"
- fi
-}
-
-function init_network {
- echo $CMDLINE |grep -q netdev
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*netdev=}
- MYTHDEFAULT=${TEMPVAR%% *}
- else
- MYTHDEFAULT="eth0"
- fi
-
-
-
- echo $CMDLINE | grep -q ip
- if [ $? = 0 ]
- then
- update_db_settings HostDefaulteth0 0
- update_db_settings HostDefault${MYTHDEFAULT} 1
-
- update_db_settings HostActiveonbooteth0 0
- update_db_settings HostActiveonboot${MYTHDEFAULT} 1
- update_db_settings HostNetDevice ${MYTHDEFAULT}
-
- TEMPVAR=${CMDLINE#*ip=}
- IP=${TEMPVAR%% *}
- if [ x$IP = xdhcp ]
- then
- /sbin/dhcpcd $MYTHDEFAULT
- update_db_settings HostUseDHCP${MYTHDEFAULT} 0
- else
- /sbin/ifconfig ${MYTHDEFAULT} $IP
- update_db_settings HostUseDHCP${MYTHDEFAULT} 1
- update_db_settings HostIP${MYTHDEFAULT} "$IP"
- rest_of_network
- fi
- fi
-}
-
-function init_remote {
- echo $CMDLINE | grep -q remoteport
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*remoteport=}
- REMOTEPORT=${TEMPVAR%% *}
- if [ x"$ReceiverType" = "xSerial" ]
- then
- if [ -e /dev/$REMOTEPORT ]
- then
- /usr/bin/setserial /dev/$REMOTEPORT uart none
- /sbin/modprobe lirc_serial
- update_db_settings HostReceiverType Serial
- update_db_settings HostSerialPortlirc "$REMOTEPORT"
- fi
- fi
-
- fi
-
- echo $CMDLINE | grep -q remote
- if [ $? = 0 ]
- then
- TEMPVAR=${CMDLINE#*remote=}
- Remotetype=${TEMPVAR%% *}
- setupremote
- else
- scan_for_usb_remote
- fi
-}
-
-#-----------------------
-
-#set -x
-
-partition_it () {
-ROOT=$1
-DATA=$2
-SWAP=$3
-
-if [ ! x$SWAP = xNO ]
- then
- SWAPLINE=",$SWAP,S"
- MKSWAPCMD="mkswap /dev/${disk}2"
- else
- SWAPLINE=",0,0"
- MKSWAPCMD=""
- fi
-
-if [ x$DATA = xALL ]
-then
- DATALINE=",,,"
- EXTRALINE=""
-else
- DATALINE=",$DATA,,"
- EXTRALINE=",0,,"
-fi
-sfdisk /dev/$disk -uM << EOF
-,$1,,*
-$SWAPLINE
-$DATALINE
-$EXTRALINE
-;
-EOF
-
-$MKSWAPCMD
-#sfdisk -l /dev/$disk
-}
-
-
-function fscmd () {
-
-case $1 in
- reiserfs) FSCMDC="mkreiserfs -q -l ROOT"
- ;;
-
- xfs) FSCMDC="mkfs -t $1 -f"
- ;;
- ext3) FSCMDC="mkfs.ext3"
- ;;
- jfs) FSCMDC="mkfs.jfs -q "
- ;;
- *) FSCMDC="echo $1"
- ;;
-
-esac
-}
-
-format_it () {
- fscmd $1
- $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n
- fscmd $2
- $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n
-}
-
-mount_it () {
- if [ ! -d \/$mountpoint ]
- then
- mkdir \/$mountpoint
- fi
- mount /dev/${disk}1 \/$mountpoint
- mkdir \/$mountpoint/myth
- mount /dev/${disk}3 \/$mountpoint/myth
-}
-
-unmount_it () {
- umount /dev/${disk}1
- umount /dev/${disk}3
-}
-
-
-copy_it () {
-
- if [ x$1 = xALL ]
- then
- echo "Transferring system"
- unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf
- else
- echo "Upgrading system"
- unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf
- fi
-
- for i in sys proc dev tmp
- do
- mkdir /$mountpoint/$i
-
- done
- chmod 777 /$mountpoint/tmp
- mknod /$mountpoint/dev/null c 1 3
- mknod /$mountpoint/dev/null c 1 5
- mknod /$mountpoint/dev/console c 5 1
- chmod +s /$mountpoint/usr/bin/Xorg
- chmod +s /$mountpoint/usr/bin/crontab
- chmod +s /$mountpoint/usr/bin/sudo
- chmod +s /$mountpoint/bin/mount
-
-}
-
-
-device_node () {
- cd /dev
- mknod hda b 3 0
- mknod hda1 b 3 1
- mknod hda2 b 3 2
- mknod hda3 b 3 3
- mknod hda4 b 3 4
- mknod hda5 b 3 5
- mknod hda6 b 3 6
- mknod hda7 b 3 7
- mknod hda8 b 3 8
- mknod sda b 8 0
- mknod sda1 b 8 1
- mknod sda2 b 8 2
- mknod sda3 b 8 3
- mknod sda4 b 8 4
- mknod sda5 b 8 5
- mknod sda6 b 8 6
- mknod sda7 b 8 7
- mknod sda8 b 8 8
- mknod sdb b 8 16
- mknod sdb1 b 8 17
- mknod sdb2 b 8 18
- mknod sdb3 b 8 19
- mknod sdb4 b 8 20
- mknod sdb5 b 8 21
- mknod sdb6 b 8 22
- mknod sdb7 b 8 23
- mknod sdb8 b 8 24
- cd -
- }
-
-
-function create_fstab()
-{
-echo "creating fstab"
-cat > /$mountpoint/etc/fstab << EOF
-# <file system> <dir> <type> <options> <dump> <pass>
-none /dev/pts devpts defaults 0 0
-none /dev/shm tmpfs defaults 0 0
-/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0
-/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
-UUID=ROOTUID / auto defaults 0 1
-UUID=DATAUID /myth auto defaults 0 1
-UUID=SWAPUID swap swap defaults 0 0
-EOF
-
-
-}
-
-
-function find_uuid() {
- uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2`
- echo $uuid for $1
- FOUNDUUID=$uuid
-
-}
-
-
-case $1 in
- partition_it )
- #drive ROOT DATA(ALL) SWAP(NO)
- for i in `mount | grep $disk | awk ' { print $1 } '`
- do
- umount $i
- done
- swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '`
- swapoff $swap
- partition_it $3 $4 $5
- exit 0
-
- ;;
- format_it )
- device_node
-
- format_it $3 $4
- exit 0
- ;;
- mount_it )
- mount_it
- ;;
- copy_it )
- copy_it $3
-
- ;;
-
-
- fstab_fix_it)
- echo $@ >> /tmp/fstab.input
- if [ ! -f /$mountpoint/etc/fstab ]
- then
- create_fstab
- fi
- #was 5
- if [ x$3 = xUPGRADE ]
- then
- if [ ! -f /tmp/etc/KnoppMyth-version ]
- then
- if [ -f /tmp/etc/fstab ]
- then
- cp -f /tmp/etc/fstab /$mountpoint/etc/fstab
- else
- create_fstab
- fi
- else
- create_fstab
- fi
- fi
-
- #search for UUID
- FOUNDUUID=""
- find_uuid ${2}1
- ROOTUUID=$FOUNDUUID
- echo "--"
- echo $ROOTUUID
- echo "--"
- FOUNDUUID=""
- find_uuid ${2}2
- SWAPUUID=$FOUNDUUID
-
- FOUNDUUID=""
- find_uuid ${2}3
- DATAUUID=$FOUNDUUID
-
-
- sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab
- sed -i -e "s/.*\/myth\ .*$/UUID=$DATAUUID \/myth auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab
- sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab
-
-#if Knoppmyth upgrade then loop through old fstab picking out vg
- if [ -f /tmp/etc/KnoppMyth-version ]
- then
- if [ -f /tmp/etc/fstab ]
- then
- grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab
- grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir
- grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs chown -R mythtv:users
- fi
- fi
- ;;
-
- grub_it )
- grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)"
- #fixing grub/menu.1st
- FOUNDUUID=""
- find_uuid ${disk}1
- ROOTUUID=$FOUNDUUID
- sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst
- mkinitcpio -g /$mountpoint/boot/kernel26.img
- ;;
- umount_it)
- umount \/$mountpoint/myth
- umount \/$mountpoint
- ;;
- update_db_it )
- update_db_settings "$2" "$3"
- ;;
-
-
-esac
-
-
-
diff --git a/abs/core-testing/live-installer/install_proxy.sh b/abs/core-testing/live-installer/install_proxy.sh
deleted file mode 100755
index bc89a1d..0000000
--- a/abs/core-testing/live-installer/install_proxy.sh
+++ /dev/null
@@ -1,526 +0,0 @@
-#!/bin/bash
-#chroot and /tmp
-MVHOSTNAME=larch5
-. /etc/profile
-TEMP_TEMPLATES=/tmp/templates
-disk=$2
-rootfs=$3
-rootsize=$4
-datafs=$5
-datasize=$6
-swapsize=$7
-mountpoint="/new_boot"
-run=$MV_ROOT/bin/install_functions.sh
-. /etc/systemconfig 2>/dev/null
-. $MV_ROOT/bin/networkconfig.sh
-CMDLINE=$(cat /proc/cmdline)
-
-#TEMPNET="Hostip"$default_interface
-#eval MYTHIP=\$${TEMPNET}
-
-
-progress () {
-mypercent=`echo "$1" | cut -d. -f1`
-if [ x$mypercent = x ]
-then
-echo "" > /tmp/.install_percent
-else
-echo "${mypercent}% complete" > /tmp/.install_percent
-fi
-
-
-}
-
-function apply_new_auth () {
-#check if file is present
- if [ -f /root/myth_user_call.out ]
- then
- #read in file, running each command in chroot
- exec 4</root/myth_user_call.out
- while read LINE <&4
- do
- if [ ! x"$LINE" = x ]
- then
- #run commands in chroot
- chroot "$mountpoint" $MV_ROOT/bin/myth_user_call -i $LINE > /tmp/user_auth.update
- fi
- done
- rm -f /root/myth_user_call.out
- else
- echo "No new password changes to apply"
- fi
-}
-
-
-function backup_sql_check {
-
- if [ -f $mountpoint/myth/backup/mythconverg.sql.gz ]
- then
- return 0
- else
- return 1
- fi
-}
-
-function upgrade_mount_search {
- MYTH_P=`cat /tmp/etc/fstab |grep /myth| awk ' {print $1 '} `
- umount $mountpoint/myth
- mount $MYTH_P $mountpoint/myth
- return 0
-
-}
-
-
-full_install () {
- if [ -f /tmp/.this_is_upgrade ]
- then
- rm /tmp/.this_is_upgrade
- fi
- echo "Partitioning $disk" > /tmp/.install_state
- progress 1
- sleep 1
- $run partition_it $disk $rootsize $datasize $swapsize
-
- echo "Formating $disk" > /tmp/.install_state
- progress 2
- sleep 1
- $run format_it $disk $rootfs $datafs
-
- echo "Preparing $disk" > /tmp/.install_state
- progress 3
- sleep 1
- $run mount_it $disk
-
- startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
-
- echo "STARTSIZE=$startsize">/tmp/.startsize.io
- echo "Installing data" > /tmp/.install_state
-
- sleep 1
- $run copy_it $disk ALL
- rm $mountpoint/etc/fstab
- $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
-
- progress 99
- sleep 1
- $run grub_it $disk
-
-
- echo "Configuring system" > /tmp/.install_state
- progress 100
- sleep 1
- cp -f /etc/systemconfig "$mountpoint"/etc
- #run save syssettings to save settings, then copy to new mountpoint
- $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
- SE=$TEMPLATES/settings/syssettings
- mkdir -p ${mountpoint}$SE
- cp -rp $SE/* ${mountpoint}$SE/
- chown root:mythtv "$mountpoint"/etc/systemconfig
- chown -R mythtv:mythtv ${mountpoint}$SE
-
- chmod -R 775 ${mountpoint}$SE
- chmod 775 "$mountpoint"/etc/systemconfig
- #copy over any updates that might have occured
- cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
- chmod -R 755 ${mountpoint}/root
- cp /etc/mtab "$mountpoint"/etc/mtab
- apply_new_auth
-
-
- if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
- then
- #installing DB to local machine
- #turn off old live database, so the chroot one can start
- /etc/rc.d/mysqld stop
- mount --bind /dev "$mountpoint/dev"
- chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
- echo "stopping mysql in chroot"
- chroot "$mountpoint" /etc/rc.d/mysqld stop
- umount "$mountpoint/dev"
-
- #/etc/rc.d/mysqld start
- else
- #update remotedb with this host settings
- chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1
- chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- if [ ! $? = 0 ]
- then
- touch $mountpoint/tmp/.dbsysfailed
- chmod 777 $mountpoint/tmp/.dbsysfailed
- else
- #Run second time
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
- chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- fi
- fi
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced
- touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure
-
- echo "Done" > /tmp/.install_state
- cp /tmp/mythvantage_install.log $mountpoint/var/log/
- $run unmount_it $disk
-}
-
-function createsquashlist(){
-if [ -f $1 ]
-then
- rm -f
-$1
-fi
-for i in bin boot etc home lib opt root sbin usr var
-do
-echo $i >> $1
-done
-
-
-}
-
-
-
-
-function upgrade () {
- touch /tmp/.this_is_upgrade
-
- if [ ! x$rootfs = "xDo_not_format" ]
- then
- echo "Formating $disk" > /tmp/.install_state
- progress 2
- sleep 1
- $run format_it $disk $rootfs NO
- fi
- echo "Preparing $disk" > /tmp/.install_state
- progress 3
- sleep 1
- $run mount_it $disk
- startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
- echo "STARTSIZE=$startsize">/tmp/.startsize.io
- echo "Installing data" > /tmp/.install_state
- sleep 1
- cp -rf /tmp/etc /new_boot/etc.old
- cp -rf /tmp/oss /new_boot/var/lib/oss.old
-
-
- SQUASHLIST="/tmp/.squashlist"
- createsquashlist $SQUASHLIST
- $run copy_it $disk $SQUASHLIST
- #copy back ssh keys
-
- cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
- cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/
- cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/
- cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/
-
- if [ ! -f /tmp/etc/KnoppMyth-version ]
- then
- #passwd/shadow/group
- cp -fp /new_boot/etc.old/passwd /new_boot/etc/
- cp -fp /new_boot/etc.old/shadow /new_boot/etc/
- cp -fp /new_boot/etc.old/group /new_boot/etc/
- fi
-
- if [ x$rootfs = "xDo_not_format" ]
- then
- rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '`
- fi
- $run fstab_fix_it $disk UPGRADE
-
- echo "Writing boot sector" > /tmp/.install_state
- progress 99
- sleep 1
- $run grub_it $disk
-
- echo "Configuring system" > /tmp/.install_state
- progress
- sleep 1
- cp /etc/mtab "$mountpoint"/etc/mtab
- cp -f /etc/systemconfig "$mountpoint"/etc
-#make sure mythconverg.sql.gz is present
- if [ ! backup_sql_check ]
- then
- upgrade_mount_search
- fi
-
- if [ -f /tmp/etc/KnoppMyth-version ]
- then
- #run save syssettings to save settings, then copy to new mountpoint
- $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost
- SE=$TEMPLATES/settings/syssettings
- mkdir -p ${mountpoint}$SE
- cp -rp $SE/* ${mountpoint}$SE/
- chown root:mythtv "$mountpoint"/etc/systemconfig
- chown -R mythtv:mythtv ${mountpoint}$SE
- chmod -R 775 ${mountpoint}$SE
- touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade
- fi
-
- cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
- chmod -R 755 ${mountpoint}/root
- chown root:mythtv "$mountpoint"/etc/systemconfig
- chmod 775 "$mountpoint"/etc/systemconfig
- #mount /proc and /dev
- mount --bind /dev "$mountpoint/dev"
- mount --bind /proc "$mountpoint/proc"
-
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
- #wrap this in a network check_network, no need to update the db if the import worked.
-##### do I need to start mysql?
- /etc/rc.d/mysqld stop
- chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" > /tmp/chrootdb_km.out
- if [ -f /tmp/etc/KnoppMyth-version ]
- then
- chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings
- else
- chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
- fi
- #
- #Run second time
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
- chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
- apply_new_auth
- umount "$mountpoint/dev"
- umount "$mountpoint/proc"
-
- echo "Done" > /tmp/.install_state
- cp /tmp/mythvantage_install.log $mountpoint/var/log/
-
- $run unmount_it $disk
- /etc/rc.d/mysqld start
-}
-
-function netboot-full_install () {
- TEMPVAR=${CMDLINE#*nfsroot=}
- NFSROOT=${TEMPVAR%% *}
- NFSROOT=`echo $NFSROOT|cut -d: -f1`
- MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
- URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
- echo "calling $URL"
- echo "Starting" > /tmp/.install_state
- curl $URL
- ${MV_ROOT}/bin/xconfig.sh
-}
-
-function killdhcp () {
-if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
- then
- pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
- kill -9 $pid
- rm -f /etc/dhcpc/dhcpcd-eth0.pid
- rm -f /var/run/dhcpcd*
- fi
-if [ -f /var/run/dhcpcd-eth0.pid ]
- then
- pid=`cat /var/run/dhcpcd-eth0.pid`
- kill -9 $pid
- rm -f /var/run/dhcpcd-eth0.pid*
- fi
-ip address flush dev eth0
-}
-
-
-
-function SANE_SYSETTINGS () {
-sed -e '/HOSTrootfstype/d' \
- -e '/HOSTrootfstype/d' \
- -e '/HOSTdatafstype/d' \
- -e '/HOSTOSsize/d' \
- -e '/HostUseALLdata/d' \
- -e '/HOSTDATAsize/d' \
- -e '/HOSTuprootfstype/d' \
- -e '/HostUseSWAP/d' \
- -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new
- mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
-}
-
-case $1 in
- full_install_it ) full_install ;;
-
- NETBOOT)
-echo "-----------------------------------------------------------------------3-----"
- netboot-full_install ;;
-
- find_update)
- #TRY TO mount first partition of drive
- #copy /etc/systemconfig to live, import settings into db
- #umount drive
- $run mount_it $disk
- if [ -f /new_boot/etc/systemconfig ]
- then
- ###########ADD templates
- mkdir -p $TEMP_TEMPLATES
- cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES
- SANE_SYSETTINGS
- cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/
- cp /new_boot/etc/systemconfig /etc/systemconfig
- cp -rf /new_boot/etc /tmp/etc
- cp -rf /new_boot/var/lib/oss /tmp/oss
-
- $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1
- else
- cp -rf /new_boot/etc /tmp/etc
- #now we search for the timezone and try to update
- TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1`
- TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -`
-
-
- if [ $TZREGION = $TZSUB ]
- then
- $run update_db_it HostTimeZoneRegion "$TZREGION"
- else
- $run update_db_it HostTimeZoneRegion "$TZREGION"
- $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB"
- fi
-
-
-
- fi
-
-
-
- $run umount_it $disk
- ;;
-
- upgrade_it)
- #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&"
- upgrade
-
- ;;
- disk_model_it)
- model="unknown"
- size="xxx"
- case $2 in
-
- h* )
- model=`cat /proc/ide/$2/model`
- ;;
- s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
- ;;
- esac
- size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' `
-
-
- echo ""$model" $size " >/tmp/model
-
- ;;
- network_check_it)
- #Should never return from check_network
- case $2 in
- setup_network)
- vnc_check
- install_network_setup
- ;;
-
- check_self)
- myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
- ping -c 1 $myipdefault
- if [ ! $? = 0 ]
- then
- exit 3
- #can't ping yourself
- fi
- ;;
- check_gw)
- #check gateway
- mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'`
- if [ ! x$mygwdefault = x ]
- then
- ping -c 1 $mygwdefault
- if [ ! $? = 0 ]
- then
- exit 4
- fi
- fi
- ;;
- check_ns)
- #check nameserver
- mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
- ping -c 1 $mydns
- if [ ! $? = 0 ]
- then
- exit 5
- fi
- ;;
- check_names)
- host google.com
- if [ ! $? = 0 ]
- then
- exit 6
- fi
- ;;
- host_names)
- #if host is found, then check to see if it's online
- #if not online, assume it's ok to use this hostname
-
- hout=`host $hostname`
- status=$?
- #found host, now grab the ip
- if [ $status = 0 ]
- then
- hoip=`echo $hout|awk '{print $4}'`
- ping -c 1 $hoip
- if [ $? = 0 ]
- then
- status=0
- else
- status=1
- fi
- fi
-
- if [ $status = 0 ]
- then
- exit 7
- fi
-
-
- ;;
-
- esac
- exit 0
- ;;
-
-
- * )
- state=`cat /tmp/.install_state`
- if [ x"${state}" = "xConfiguring system" ]
- then
- progress ""
- else
-
- if [ -f /tmp/.startsize.io ]
- then
- . /tmp/.startsize.io
- #finding the drive
- ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
- used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
- used=`echo $used-$STARTSIZE|bc`
- #echo $used
- fi
-
- if [ ! x$used = x ]
- then
- . /root/.install_size
- #somehow find if it's an install or update
- if [ -f /tmp/.this_is_upgrade ]
- then
- total=$UPGRADESIZE
- else
- total=$TOTALSIZE
- fi
- percent=`echo "scale=2 ; ($used/$total) * 100 " |bc `
- cond2=$(echo "$percent > 100" |bc )
- if [ $cond2 -eq 1 ]
- then
- percent=100
- fi
- cond3=$(echo "$percent < 3" |bc )
- if [ $cond3 -eq 0 ]
- then
- progress $percent
- fi
- fi
- fi
- ;;
-esac
-
-
-
diff --git a/abs/core-testing/live-installer/issue b/abs/core-testing/live-installer/issue
deleted file mode 100644
index 3c01679..0000000
--- a/abs/core-testing/live-installer/issue
+++ /dev/null
@@ -1 +0,0 @@
-LinHes
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/live-install.sh b/abs/core-testing/live-installer/live-install.sh
deleted file mode 100755
index 573bb1f..0000000
--- a/abs/core-testing/live-installer/live-install.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-#redirect stderr to stdout, then rediret stdout to file
-. /etc/profile
-exec 2>&1
-exec > /tmp/mythvantage_install.log
-. /etc/X11/STBWINDOWMANAGER
-/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
-keylaunch &
-/usr/bin/tilda &
-/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents &
-export MALLOC_CHECK_=0
-if [ -f /opt/vmware/bin32/vmware-user-wrapper ]
-then
- /opt/vmware/bin32/vmware-user-wrapper &
-fi
-xhost +
-CMDLINE=$(cat /proc/cmdline)
-echo $CMDLINE |grep -q nfsroot
-NFSROOT=$?
-if [ x$NFSROOT = x1 ]
-then
-
- unbuffer MythVantage &
-else
- NETBOOT=YES MythVantage &
-fi
-
-exec $STBWINDOWMANAGER
diff --git a/abs/core-testing/live-installer/live.install b/abs/core-testing/live-installer/live.install
deleted file mode 100644
index a0a9d31..0000000
--- a/abs/core-testing/live-installer/live.install
+++ /dev/null
@@ -1,78 +0,0 @@
-# This is a default template for a post-install scriptlet. You can
-# remove any functions you don't need (and this header).
-
-# arg 1: the new package version
-pre_install() {
- rm -f /etc/issue
- rm -f /etc/arch-release
-
-}
-
-# arg 1: the new package version
-post_install() {
- if [ ! -f /etc/blacklist.package ]
- then
- echo "List of packages to ignore" > /etc/blacklist.package
- echo "one package per line" >> /etc/blacklist.package
- fi
-
-LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage"
-LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage"
-for i in "$LINE" "$LINE1"
-do
- cp /etc/sudoers /etc/sudoers.bak
- grep -q "$i" /etc/sudoers
- if [ $? != 0 ]
- then
- echo "$i" >> /etc/sudoers
- visudo -cf /etc/sudoers
- if [ ! $? = 0 ]
- then
- cp /etc/sudoers.bak /etc/sudoers
- echo $i
- echo "Error adding files"
- exit 1
- fi
- fi
-done
-
-
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-pre_upgrade() {
- /bin/true
-}
-
-# arg 1: the new package version
-# arg 2: the old package version
-post_upgrade() {
- . /etc/profile
- ps -ef|grep mysqld|grep -v grep
- status=$?
- echo "status $status"
- if [ $status = 0 ]
- then
- restore_default_settings.sh -c load
- fi
- if [ ! -f /etc/blacklist.package ]
- then
- echo "List of packages to ignore" > /etc/blacklist.package
- echo "one package per line" >> /etc/blacklist.package
- fi
-}
-
-# arg 1: the old package version
-pre_remove() {
- /bin/true
-}
-
-# arg 1: the old package version
-post_remove() {
- /bin/true
-}
-
-op=$1
-shift
-$op $*
diff --git a/abs/core-testing/live-installer/myth_user_call b/abs/core-testing/live-installer/myth_user_call
deleted file mode 100644
index d95e468..0000000
--- a/abs/core-testing/live-installer/myth_user_call
+++ /dev/null
@@ -1,164 +0,0 @@
-#!/bin/bash
-#Wrapper script to manage USERNAME accounts + web security
-# myth_USERNAME_all -c add -u USERNAME
-# myth_USERNAME_all -c delete -u USERNAME
-# myth_USERNAME_all -c pass -u USERNAME -p pass
-# myth_USERNAME_all -c web -u USERNAME -p pass
-
-INIT_CHECK=TRUE
-FULL_CALL="$@"
-function CHROOT_CHECK {
- INIT=`ps -p 1 -o comm=`
- if [ x$INIT = xrunit ]
- then
- CHROOT_NEEDED=FALSE
- else
- CHROOT_NEEDED=TRUE
- fi
-}
-
-function store_commands () {
- echo "$FULL_CALL" >> /root/myth_user_call.out
- chmod 600 /root/myth_user_call.out
-}
-
-
-function add_user() {
- if [ $CHROOT_NEEDED = TRUE ]
- then
- echo "calling myth_call_user in chroot to add user"
- store_commands
- else
- echo "adding user $USERNAME"
- useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users
- fi
-
-}
-
-
-function del_user() {
- if [ $CHROOT_NEEDED = TRUE ]
- then
- echo "calling myth_call_user in chroot to delete user"
- store_commands
- else
- echo "removing user $USERNAME"
- userdel $USERNAME
- fi
-
-}
-
-
-function pass_change() {
- if [ $CHROOT_NEEDED = TRUE ]
- then
- echo "calling myth_call_user in chroot to change password"
- store_commands
- else
- echo "changing password for $USERNAME"
- echo $USERNAME:$PASSWORD | chpasswd
- fi
-
-}
-
-
-function web_security {
- echo "this is just a stub"
-
-}
-
-function ARG_ERR() {
- if [ x$OPTARG = "x" ]
- then
- echo "$SWITCH NEEDS AND ARG"
- exit 11
- fi
-}
-
-
-function print_help {
-
- echo "Valid options are:"
- echo " -c (add|delete|pass|web)"
- echo " -u USERNAMEname"
- echo " -p password"
- exit 1
-}
-
-if [ $# -eq 0 ]
-then
- print_help
-fi
-
-declare -r OPTSTRING="c:u:p:i"
-while getopts "$OPTSTRING" SWITCH
-do
- case $SWITCH in
-
- c) ARG_ERR
- OPERATION=$OPTARG
- ;;
- u) ARG_ERR
- USERNAME=$OPTARG
- ;;
- p) ARG_ERR
- PASSWORD=$OPTARG
- ;;
- i) INIT_CHECK=FALSE
-
- esac
-done
-
-if [ $INIT_CHECK = TRUE ]
-then
- CHROOT_CHECK
-else
- CHROOT_NEEDED=FALSE
-fi
-
-case $OPERATION in
- add)
- if [ x$USERNAME = x ]
- then
- print_help
- fi
- add_user
- ;;
- delete)
- if [ x$USERNAME = x ]
- then
- print_help
- fi
- del_user
- ;;
- pass)
- if [ x$USERNAME = x ]
- then
- print_help
- fi
-
- if [ x$PASSWORD = x ]
- then
- print_help
- fi
- pass_change
- ;;
-
- web)
- if [ x$USERNAME = x ]
- then
- print_help
- fi
-
-
- if [ x$PASSWORD = x ]
- then
- print_help
- fi
- echo "adding webUSERNAME $USERNAME with $PASS"
- ;;
- *) print_help
- ;;
-esac
-
-
diff --git a/abs/core-testing/live-installer/networkconfig.sh b/abs/core-testing/live-installer/networkconfig.sh
deleted file mode 100644
index 61a7405..0000000
--- a/abs/core-testing/live-installer/networkconfig.sh
+++ /dev/null
@@ -1,280 +0,0 @@
-#!/bin/bash
-#. /etc/profile
-#. /etc/systemconfig
-#BASE=/tmp
-ETCNETDIR=$BASE/etc/net/ifaces
-
-
-
-function kill_dhcp ()
-{
-for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid
-do
- if [ -f ${i} ]
- then
- pid=`cat ${i}`
- kill -9 $pid
- rm -f ${i}
- fi
- if [ x$1 = xflush ]
- then
- for ifdev in eth0 wlan0 eth1 wlan1
- do
- echo ${i} |grep $ifdev
- status=$?
- if [ $status = 1 ]
- then
- ip address flush $ifdev
- fi
- done
- fi
-
-done
-
-}
-
-function setup_nameserver(){
-grep -q $1 ${BASE}/etc/resolv.conf
-status=$?
-if [ ! $status = 0 ]
-then
- echo "nameserver $1" >> ${BASE}/etc/resolv.conf
-fi
-
-}
-
-function setup_interfaces() {
- local IS_WIRELESS
- local ip
- local netmask
- local isactive
- local dns
- local UseDHCP
- local GW
- local ESSID
- local KEY
- local ENCRYPT
- local TEMPNET
- IS_WIRELESS=false
-
- #local ip
- TEMPNET="Hostip"$1
- echo $TEMPNET
- eval ip=\$${TEMPNET}
-
- TEMPNET=Hostnetmask$1
- eval netmask=\$${TEMPNET}
- netmask=`echo "$netmask" | cut -d " " -f1`
-
- TEMPNET=HostActive$1
- eval isactive=\$${TEMPNET}
-
- TEMPNET=HostDNS$1
- eval dns=\$${TEMPNET}
-
- TEMPNET="HostUSEDHCP"$1
- eval UseDHCP=\$${TEMPNET}
-
- TEMPNET=HostGW$1
- eval GW=\$${TEMPNET}
-
-
-
- if [ $1 = wlan0 -o $1 = wlan1 ]
- then
- IS_WIRELESS=TRUE
- TEMPNET=HostESSID$1
- eval ESSID=\$${TEMPNET}
-
- TEMPNET="HostKey"$1
- eval KEY=\$${TEMPNET}
-
- TEMPNET=HostUseEncryption$1
- eval ENCRYPT=\$${TEMPNET}
- fi
-
-
- echo "Setup $1 in progress, wireless: $IS_WIRELESS"
-
- if [ ! -d $ETCNETDIR/$1 ]
- then
- mkdir -p $ETCNETDIR/$1
- fi
-
- if [ ! -f $ETCNETDIR/$1/options ]
- then
- cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options
- fi
-
- if [ x$isactive = x0 ]
- then
- echo "setting $1 to inactive"
- sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options
-
- else
- echo "setting $1 to active"
- sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options
- fi
-
- if [ x$IS_WIRELESS = xTRUE ]
- then
- echo "setting $1 wireless"
- sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options
- #set the key and essid
- echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig
- if [ x$ENCRYPT = x1 ]
- then
- echo "key $KEY" >> $ETCNETDIR/$1/iwconfig
- fi
-
- else
- echo "disabling wireless"
- sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options
- fi
-
-
-
-
- if [ $UseDHCP = 0 ]
- then
- echo using dhcp
- sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options
-
- else
- echo "using static ip"
- sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options
- echo "default via $GW" > $ETCNETDIR/$1/ipv4route
- echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address
- setup_nameserver $dns
- fi
-}
-
-
-function find_active () {
-#HostActiveeth1="1"
-rm -f ${BASE}/etc/resolv.conf
-if [ x$MYTHDHCP = x1 ]
- then
- #add 127.0.0.1 to /etc/resolv.conf
- echo "search lan" > ${BASE}/etc/resolv.conf
- echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
- fi
-
-for i in eth0 eth1 wlan0 wlan1
-do
- CURRENTIF="HostActive"$i
- eval IFSTATE=\$${CURRENTIF}
- if [ x$IFSTATE = x1 ]
- then
- setup_interfaces $i
- fi
-done
-}
-
-function setup_hostname {
-#set the hostname
-if [ ! x$hostname = x ]
-then
- echo $hostname > ${BASE}/etc/hostname
- cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts
- #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts
-
- if [ x$MYTHDHCP = x1 ]
- then
- echo "127.0.0.1 localhost " > ${BASE}/etc/hosts
- echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts
- else
- echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts
- fi
- cat /tmp/hosts >> ${BASE}/etc/hosts
-fi
-
-kill_dhcp
-}
-
-function vnc_check() {
- CMDLINE=$(cat /proc/cmdline)
- echo $CMDLINE |grep -q vnc
- USEVNC=$?
- echo $CMDLINE |grep -q nfsroot
- NETBOOT=$?
- echo $USEVNC
- if [ ! x$USEVNC = x0 ]
- then
- echo "not using vnc"
- if [ ! x$NETBOOT = x0 ]
- then
- echo "not using netboot"
- else
- echo "using netboot"
- USEVNC=0
- fi
-
- else
- echo " using vnc"
- fi
-}
-
-function setup_MYTH_vars {
- TEMPMYTH="Hostip"$default_interface
- #echo $TEMPMYTH
- eval MYTHIP=\$${TEMPMYTH}
-
- TEMPMYTH="HostUSEDHCP"$default_interface
- eval MYTHDHCP=\$${TEMPMYTH}
-
-
-
-}
-
-
-
-function setup_network {
- setup_MYTH_vars
- setup_hostname
- find_active
-}
-
-function start_network {
-if [ ! $USEVNC = 0 ]
-then
- /etc/net/scripts/network.init restart
-
-else
- echo "VNC/NETBOOT in use, will NOT restart network"
-fi
-
-}
-
-function stop_network {
-if [ ! $USEVNC = 0 ]
-then
- echo "stopping the network"
- kill_dhcp flush
- ip address flush dev eth0 2>&1 >/dev/null
- ip address flush dev eth1 2>&1 >/dev/null
- ip address flush dev wlan0 2>&1 >/dev/null
- ip address flush dev wlan1 2>&1 >/dev/null
-else
- echo "VNC/NETBOOT in use, will NOT restart network"
-fi
-
-}
-
-
-#this is used by the install process to start the network
-function install_network_setup {
- setup_MYTH_vars
- setup_hostname
- stop_network
- find_active
- start_network
-
-}
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/remove_service.sh b/abs/core-testing/live-installer/remove_service.sh
deleted file mode 100755
index 6cc4b4f..0000000
--- a/abs/core-testing/live-installer/remove_service.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/bash
-SERVICE_DIR=/var/service
-SCRIPT_DIR=/etc/sv
-if [ -e $SERVICE_DIR/$1 ]
-then
- echo "removing"
- rm $SERVICE_DIR/$1
-fi
diff --git a/abs/core-testing/live-installer/restore_default_settings.sh b/abs/core-testing/live-installer/restore_default_settings.sh
deleted file mode 100755
index 5690f48..0000000
--- a/abs/core-testing/live-installer/restore_default_settings.sh
+++ /dev/null
@@ -1,349 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. /etc/systemconfig
-shopt -s -o nounset
-echo $@ >> /tmp/restore.out
-#TEMPLATES="/usr/share/templates/settings"
-TEMPLATES="$TEMPLATES/settings"
-TABLES="settings keybindings"
-MYTHDBUSER=mythtv
-MYTHTVPASSWD=mythtv
-declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho"
-Thistemplate=""
-declare -i OVERRIDE=0
-declare -i EVERYTHING=0
-
-function CMD_DEFINE () {
- #add override check
- if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ]
- then
- MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
- MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec"
- MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";"
- else
- MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
- MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec"
- MYSQLCMD_UPDATE_HOST="select hostname from settings;"
- fi
-}
-
-function SQL_DEFINE () {
- #$1 is the table name
- if [ $1 = "settings" ]
- then
- ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )"
- else
- ALTERSQL=";"
- fi
-
- CREATESQL="create table temp_${1}_${hostname} like $1;"
- COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");"
- INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';"
- #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';"
- DROPSQL="delete from $1 where hostname=\"$hostname\";"
- COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");"
- DROP_TABLE="Drop table temp_${1}_${hostname}"
-}
-
-function ARG_ERR() {
- if [ x$OPTARG = "x" ]
- then
- echo "$SWITCH NEEDS AND ARG"
- exit 11
- fi
-}
-
-function ALSADEVICE () {
-#ALSA:hw:1,4
- if [ x$Audiotype = xALSA ]
- then
- SoundDevice=ALSA:$SoundDevice
- fi
-}
-
-
-
-if [ $# -eq 0 ]
-then
- echo "Valid options are:"
- echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)"
- echo " -t (syssettings|hostsettings)"
- echo " -d databasename"
- echo " -h hostname"
- echo " -s systemtype (master|slave|standalone|frontendonly)"
- echo " -a ipaddress"
- echo " -z zipcode"
- echo " -o override (only used upgrade installs)"
- exit 1
-fi
-
-
-
-
-while getopts "$OPTSTRING" SWITCH
-do
- case $SWITCH in
- # \?) echo "unkown option"
- # exit 11 ;;
- c) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- OPERATION=$OPTARG
- ;;
- t) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- Thistemplate=$OPTARG
-
- if [ x$Thistemplate = x"syssettings" ]
- then
- echo "template is syssettings"
- loadhost=false
- elif [ x$Thistemplate = x"hostsettings" ]
- then
- echo "template is hostsettings"
- Thistemplate=syssettings
- loadhost=true
- else
- echo "invalid template name"
- exit 1
- fi
- ;;
- d) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- if [ $OVERRIDE = 1 ]
- then
- ovdbhost=$OPTARG
- else
- dbhost=$OPTARG
- fi
- ;;
- h) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- if [ $OVERRIDE = 1 ]
- then
- oldhostname=$hostname
- hostname=$OPTARG
- else
- hostname=$OPTARG
- fi
-
- ;;
- s) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- SYSTEMTYPE=$OPTARG
- ;;
- a) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- IP_ADDRESS=$OPTARG
- ;;
- z) echo "$SWITCH" "$OPTARG"
- ARG_ERR
- ZIPCODE=$OPTARG
- ;;
- o) OVERRIDE=1
- ;;
-
- esac
-done
-
-echo $OVERRIDE
-
-#setup the Mysql commands
-CMD_DEFINE
-
-$MYSQLCMD_C "show tables" > /dev/null
-status=$?
-if [ $status = 1 ]
-then
- echo "$@ failed"
- echo "$@ failed" >> /tmp/restore.out
- exit 1
-fi
-
-
-
-
-
-
-
-case $OPERATION in
-
- restore)
- #used to restore settings from syssettings
- if [ -d $TEMPLATES/$Thistemplate ]
- then
- cd $TEMPLATES/$Thistemplate
- if [ $loadhost = false ]
- then
- for i in $TABLES
- do
- SQL_DEFINE $i
- sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt
- #echo $MYSQLCMD "$SELECTSQL"
- echo $i
- $MYSQLCMD "$CREATESQL"
- $MYSQLCMD "$ALTERSQL"
- $MYSQLCMD "$COPY_TMP_SQL"
- $MYSQLCMD "$INSERTSQL"
- $MYSQLCMD "$DROPSQL"
- $MYSQLCMD "$COPY_BCK_SQL "
- $MYSQLCMD "$DROP_TABLE "
- #rm /tmp/$i.txt
- done
- fi
- if [ $loadhost = true ]
- then
- #only load the settings table with values HOST
- i=settings
- SQL_DEFINE $i
- sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt
- echo $i
- $MYSQLCMD "$CREATESQL"
- $MYSQLCMD "$ALTERSQL"
- $MYSQLCMD "$INSERTSQL"
- $MYSQLCMD "$COPY_TMP_SQL"
- $MYSQLCMD "$DROPSQL"
- $MYSQLCMD "$COPY_BCK_SQL"
- $MYSQLCMD "$DROP_TABLE "
- fi
- else
- echo "couldn't find $TEMPLATES/$Thistemplate"
- fi
- ;;
-
- save)
-
- if [ ! -d $TEMPLATES/$Thistemplate ]
- then
- mkdir -p $TEMPLATES/$Thistemplate
- fi
-
- cd $TEMPLATES/$Thistemplate
- for i in $TABLES
- do
- EXTRACLAUSE=""
- case $i in
- settings)
- EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value"
- SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
- # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
- $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
- ;;
- keybindings)
- SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;"
- $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt
- ;;
- esac
- # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i
-
- done
- ;;
-
- load)
-
- #will load both default_1 and default_2 unless either file is not found
- for i in default_1 default_2
- do
- if [ -f $TEMPLATES/$i/settings.txt ]
- then
- echo $i
- for tablename in $TABLES
- do
- #create table
- CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;"
- $MYSQLCMD_C "$CREATESQL"
- #truncate table
- TRUNCATESQL="truncate ${tablename}_${i} "
- $MYSQLCMD_C "$TRUNCATESQL"
- #load table
- INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';"
- $MYSQLCMD_C "$INSERTSQL"
- #update_hostname
- UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; "
- $MYSQLCMD_C "$UPDATEHOSTNAMESQL"
- done
- else
-
- echo "couldn't find $TEMPLATES/$i/settings.txt template to load"
- fi
- CREATESQL="create table IF NOT EXISTS settings_user1 like settings;"
- $MYSQLCMD_C "$CREATESQL"
- CREATESQL="create table IF NOT EXISTS settings_user2 like settings;"
- $MYSQLCMD_C "$CREATESQL"
- CREATESQL="create table IF NOT EXISTS settings_user3 like settings;"
- $MYSQLCMD_C "$CREATESQL"
-
- CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;"
- $MYSQLCMD_C "$CREATESQL"
- CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;"
- $MYSQLCMD_C "$CREATESQL"
- CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;"
- $MYSQLCMD_C "$CREATESQL"
- done
-;;
-
-
-
- BECONFIG)
- if [ $SYSTEMTYPE = "master" ]
- then
- $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';"
- $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";"
- fi
-
- if [ $SYSTEMTYPE = "slave" ]
- then
- $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";"
- fi
- ;;
- ZIP)
- $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";"
- $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";"
- ;;
- MUSICFRONT)
- ALSADEVICE
- $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";"
- #need to reload the settings.
- systemconfig.sh reloadfe
- ;;
- MUSICMYTH)
- ALSADEVICE
- $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";"
- ;;
- uhostname)
- #used when the hostname is changed.
- TABLES="settings capturecard keybindings storagegroup recorded"
- for i in $TABLES
- do
- USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;"
- $MYSQLCMD_C "$USQL"
- done
-
- ;;
- USERJOBALLOW)
- SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;"
- $MYSQLCMD_C "$SQL"
- ;;
-
- ACCESSCONTROL)
- LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound"
-
- for i in $LIST
- do
- $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";"
- $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";"
- done
- SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;"
- $MYSQLCMD_C "$SQL"
- esac
-
-#SELECT * INTO OUTFILE 'data.txt'
-# FIELDS TERMINATED BY ','
-# FROM table2;
-
-
diff --git a/abs/core-testing/live-installer/restore_km_db_chroot.sh b/abs/core-testing/live-installer/restore_km_db_chroot.sh
deleted file mode 100644
index 9467ffd..0000000
--- a/abs/core-testing/live-installer/restore_km_db_chroot.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. /etc/systemconfig
-set -x
-#myhost=`cat /etc/hostname`
-myhost=$hostname
-hostname $myhost
-mount -t proc none /proc
-DBFILE=$1
-
-if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ]
- then
- #restore database
- pacman --noconfirm -Sf mysql
- status=1
- mysqlstatus=1
- while [ ! $status = 0 ]
- do
- /etc/rc.d/mysqld stop
- sleep 1
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql -e "show databases;"
- showstatus=$?
- if [ $showstatus = 0 ]
- then
- #load database
- pacman --noconfirm -R mythdb-initial
- pacman --noconfirm -S mythdb-initial
- echo "restoring old database"
- gunzip -c /myth/backup/mythconverg.sql.gz > /myth/backup/mythconverg.sql
- mysql mythconverg < /myth/backup/mythconverg.sql
-
-
- if [ -d /var/lib/mysql/mythconverg ]
- then
- status=0
- fi
- fi
- fi
- done
- rm -f /myth/backup/mythconverg.sql
- else
- exit 0
- fi
-
-#/etc/rc.d/mysqld stop
-#umount /proc
-
-
-
diff --git a/abs/core-testing/live-installer/soundconfig.sh b/abs/core-testing/live-installer/soundconfig.sh
deleted file mode 100755
index 1adb447..0000000
--- a/abs/core-testing/live-installer/soundconfig.sh
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/bin/bash
-. /etc/systemconfig
-. /etc/profile
-echo $@ >/tmp/audio.call
-#set -x
-BASE=""
-. /etc/profile
-#TEMPLATES="/usr/share/templates"
-TESTFILE="$TEMPLATES/audio/space_battle_A.wav"
-OSSinstalled="false"
-
-function testaudio () {
-
-ossplay -d$AUDIODEVICE $TESTFILE
-
-}
-
-function load_alsa() {
-
- remove_service.sh alsa-utils
-# cd /lib/modules/2.6.21-STB
- KER=`uname -r`
- cd /lib/modules/$KER/kernel/
- tar -xvf alsa-$KER.tar
- pacman -Sf --noconfirm alsa-lib
-
- depmod -a
- cd -
- udevsettle
- udevsettle
- udevtrigger
-
- add_service.sh alsa-utils
- sleep 4
- sv start alsa-utils
-}
-
-
-function unload_alsa () {
-#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
- sv stop alsa-utils
- remove_service.sh alsa-utils
- rm -rf /dev/adsp*
- rm -rf /dev/snd/*
- rm -rf /dev/audio
- modprobe -r $(lsmod |grep ^snd |awk '{print $1}')
-}
-
-function unload_oss {
- sv stop oss
- soundoff
- rm -rf /dev/dsp*
- rm -rf /dev/oss*
- rm -rf /dev/sndstat
- remove_service.sh oss
-}
-
-function installOSS {
- echo "installing oss"
- add_service.sh oss
- sleep 4
- sv start oss
-}
-
-
-function SYNCXINE {
-echo "modify xine config file"
- if [ -f /data/home/mythtv/.xine/config ]
- then
- cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config
- else
- cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config
- fi
-
- if [ x$Audiotype = xOSS ]
- then
- DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp `
- sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \
- -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \
- -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \
- -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \
- $TEMPLATES/xine.config > /data/home/mythtv/.xine/config
- else
- cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config
- fi
-
-}
-
-function SYNCMPLAYER {
-echo "modify mplayer not implmented yet"
-}
-
-function SYNCMYTHMUSIC {
-echo "sync mythmusic"
-$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH
-}
-
-function SYNCMYTHFRONTEND {
-echo "sync mythfrontend"
-$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT
-}
-
-
-function checkOSSinstalled () {
- ossinfo 1>/dev/null
- resultcode=$?
- echo $resultcode
- if [ $resultcode = 0 ]
- then
- OSSinstalled='true'
- else
- OSSinstalled='false'
- fi
-}
-
-function sound_config_system {
-
- if [ x$syncXine = x1 ]
- then
- SYNCXINE
- fi
- if [ x$syncMplayer = x1 ]
- then
- SYNCMPLAYER
- fi
- if [ x$syncMythMusic = x1 ]
- then
- SYNCMYTHMUSIC
- fi
- if [ x$syncMythFrontend = x1 ]
- then
- SYNCMYTHFRONTEND
- fi
-
-}
-
-function loadsound (){
- checkOSSinstalled
- if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ]
- #then
- # if [ $OSSinstalled = "false" ]
- then
- while [ $OSSinstalled = "false" ]
- do
- unload_alsa
- rm /tmp/.alsatest
- installOSS
- installOSS
- sleep 2
- checkOSSinstalled
- done
- # fi
- else
- touch /tmp/.alsatest
- unload_oss
- load_alsa
- load_alsa
- rm /tmp/.alsatest
-
- fi
-
-}
-
-
-
-
-#####################MAIN PROGRAM##########################
-
-declare -r OPTSTRING="i:t:d:"
-
-if [ $# -eq 0 ]
-then
- echo "Valid options are:"
- echo " -i (oss|alsa) oss or alsa subsystem "
- echo " -t (test|real|LOAD) "
- echo " -d device"
- exit 1
-fi
-
-
-
-
-while getopts "$OPTSTRING" SWITCH
-do
- case $SWITCH in
- \?) echo "unkown option"
- exit 11 ;;
- i) echo "$SWITCH" "$OPTARG"
- AUDIOTYPE="$OPTARG"
- ;;
- d) echo "$SWITCH" "$OPTARG"
- AUDIODEVICE=$OPTARG
- ;;
- t) echo "$SWITCH" "$OPTARG"
- SOUNDOPTYPE="$OPTARG"
- if [ x"$OPTARG" = xtest ]
- then
- TEST=true
- else
- TEST=false
- fi
-
-
- ;;
-
- esac
-done
-
-
-
-
-case $SOUNDOPTYPE in
- REAL|real )
- loadsound
- sound_config_system
- ;;
- test|TEST)
- echo $@ > /tmp/audio.test
- #loadsound
- if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ]
- then
- echo "testing OSS $AUDIODEVICE "
- ossplay -d$AUDIODEVICE $TESTFILE
- else
- echo "testing ALSA $AUDIODEVICE "
- aplay --device=$AUDIODEVICE $TESTFILE
- fi
-
- ;;
-
- LOAD|load)
- loadsound
- ;;
- esac
-
-
-exit 0
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/startx b/abs/core-testing/live-installer/startx
deleted file mode 100755
index 0ffdf8c..0000000
--- a/abs/core-testing/live-installer/startx
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/bash
-. /etc/profile
-
-export USER=root
-export HOME=/root
-#TEMPLATES=/usr/share/templates
-
-CMDLINE=$(cat /proc/cmdline)
-TEMPVAR=${CMDLINE#*ip=}
-IP=${TEMPVAR%% *}
-echo $CMDLINE |grep -q vnc
-USEVNC=$?
-
-if [ x$USEVNC = x1 ]
-then
- $MV_ROOT/bin/xconfig.sh
- cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
- startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail
- else
- #VNC
- pacman -Sf --noconfirm tightvnc
- cd /root
- mkdir .vnc
- echo mythvantage |vncpasswd -f > /root/.vnc/passwd
- chmod 500 /root/.vnc/passwd
- rm /root/.vnc/xstartup
- ln -s /root/live-install.sh /root/.vnc/xstartup
- vncserver
-fi
diff --git a/abs/core-testing/live-installer/systemconfig.sh b/abs/core-testing/live-installer/systemconfig.sh
deleted file mode 100755
index 845c67c..0000000
--- a/abs/core-testing/live-installer/systemconfig.sh
+++ /dev/null
@@ -1,1255 +0,0 @@
-#!/bin/bash
-###################################################################
-#Script to configure your system based off the values in /etc/systemconfig
-#Any changes made to config files will be removed when systemconfig.sh is run
-#
-#JM
-###################################################################
-#set -x
-. /etc/profile
-#MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2`
-MVRELEASE=`cat /etc/LinHES-release `
-echo $@ >/tmp/systemconfig.call
-echo "----------------------start of systemconfig $@ ----------------------"
-BASE=""
-
-#TEMPLATES="/usr/share/templates"
-. /etc/profile
-. $MV_ROOT/bin/networkconfig.sh
-PACMAN="pacman --noconfirm"
-postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype`
-PKGBLACKLIST=$BASE/etc/blacklist.package
-
-if [ x$1 = x"Mysql_only" ]
- then
- rm -f /tmp/mysql.txt
- sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt
- exit 0
- fi
-
-
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-TEMPNET="Hostip"$default_interface
-echo $TEMPNET
-eval MYTHIP=\$${TEMPNET}
-else
- echo "could not find /etc/systemconfig"
- exit 1
-fi
-
-
-
-#-----------------------------------------------------
-
-
-function setupmysql {
-#setup mysql.txt to find the database servers
- if [ $SystemType = "Master_backend" ]
- then
- if [ $MYTHDHCP = 0 ]
- then
- #this grabs eth0, as that is all thats supported.
-# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
- dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
- sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
- cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
- ##logic to change master_serverip and backend_serverip in db
- ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
- else
-
- dbhost=$MYTHIP
- sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old
- cp /tmp/systemconfig.old ${BASE}/etc/systemconfig
- #logic to change dbhost in db
- ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
- fi
- fi
-
- if [ $SystemType = "Slave_backend" ]
- then
- if [ $MYTHDHCP = 0 ]
- then
- #this grabs eth0, as that is all thats supported.
- #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1`
- slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
- ##logic to change backend_serverip in db
- ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost
- else
- slavehost=$MYTHIP
-
- #logic to change backend_serverif in db
- ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost
- fi
- fi
-
- MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt
- if [ $SystemType = "Standalone" ]
- then
- sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT
- else
- sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT
- fi
- rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt
- rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt
- if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ]
- then
- cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT
- fi
-
- chmod 755 $MYSQLTXT
- chown mythtv $MYSQLTXT
-
-}
-
-function setupmysqlnetwork(){
-MFILE=etc/my.cnf
-grep "#skip-networking" $BASE/$MFILE
-status=$?
-
-
-
- if [ $SystemType = "Standalone" ]
- then
- sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE
- if [ $status = 0 ]
- then
- sudo sv restart mysql
- echo "restarting mysql with no network"
- fi
-
- fi
-
- if [ $SystemType = "Master_backend" ]
- then
- sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE
- if [ $status = 1 ]
- then
- sudo sv restart mysql
- echo "restarting mysql with network"
- fi
-
- fi
-
-
-}
-
-
-function settimezone {
-#set the timezone
-if [ x"$timezone" = x ]
-then
- timezone="unknown"
-fi
-rm ${BASE}/etc/localtime
-echo $timezone
-ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime
- sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf
-
- # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock
- # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock
- # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock
-cp $TEMPLATES/rc.conf /etc/rc.conf
-
-}
-
-
-function setupreceiver {
- case $ReceiverType in
- tinker) echo "do nothing"
- ;;
- Serial) echo "setup serial lirc"
- sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
- echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage
- /usr/bin/load-modules-mythvantage.sh
- ;;
- Usb-imon) echo "setup receiver-usb-imon"
- sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
- echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage
- /usr/bin/load-modules-mythvantage.sh
- ;;
- *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage
- ;;
- esac
-
-
-}
-
-function setupremote {
- case $Remotetype in
- no_remote) echo "No remote selected"
- daemon_remove="lircd $daemon_remove"
- ;;
- tinker) echo "Remote in tinker mode"
- ;;
- *) echo "Setup remote"
- mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M`
- cd $TEMPLATES/remotes/$Remotetype
- for i in lircd*
- do
- cat $i >> ${BASE}/etc/lircd.conf
- done
- cp lircrc ${BASE}/etc/lircrc
- if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
- then
- cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc
- cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf
- fi
- if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ]
- then
- cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf
- fi
- chmod 755 /etc/lircrc
- daemon_add="lircd $daemon_add"
- sv hup lircd
- ;;
-esac
-
-}
-
-function setupblaster {
- #cd $TEMPLATES/transmit/$Blastertype
- #for i in lircd*
- #do
- # cat lircd.conf >> ${BASE}/etc/lircd.conf
- #done
- # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '`
- sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh
- chmod 755 ${BASE}/usr/bin/change_chan.sh
- #channel change script change
- setupremote
-
-}
-
-function setupevrouter {
- if [ x$UseEvrouter = x1 ]
- then
- case x$EvrouterConfig in
- xtinker )
- echo "do nothing for evrouter"
- ;;
- x ) echo "empty evrouter"
- ;;
- * ) echo "setup evrouter for $EvrouterConfig "
- cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg
- daemon_add="evrouter Xvfb $daemon_remove"
-
- ;;
- esac
- else
- # disable evrouter
- daemon_remove="evrouter Xvfb $daemon_remove"
- fi
-
-
-
-
-}
-
-function setupLCD {
- case x$LCDtype in
- xtinker) echo "do nothing"
- ;;
- xno_lcd) echo "disabling lcd"
- sv down lcdd
- /usr/bin/load-modules-mythvantage.sh UNLOAD LCD
- sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
- daemon_remove="lcdd $daemon_remove"
- ;;
- x) echo "empty lcd" ;;
-
- *) echo "setup lcd"
- if [ -f $TEMPLATES/LCD/$LCDtype/modules ]
- then
- sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage
- cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage
- #should also modprobe
- fi
-
-
- if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ]
- then
- cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc
- # install="lcdproc $install"
- daemon_add="lcdd $daemon_add"
- /usr/bin/load-modules-mythvantage.sh
- RESTART_FE="true"
- RESTART_LCD="true"
- fi
- #check if lirc capable,if so then call setupremote
- if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ]
- then
- setupremote
- fi
- ;;
- esac
-
-}
-
-
-
-function scrubnfs {
- cp /etc/fstab $TEMPLATES/fstab.conf.template
- grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab
- }
-
-function setupfstab () {
-# setupfstab $NFSserver $NFSshare $NFSmount
- echo "$1 $2 nfs" >> ${BASE}/etc/fstab
- if [ ! -e "$2" ]
- then
- mkdir -p "$2"
- chown mythtv:mythtv "$2"
- fi
- if [ x$DCONFIG = x ]
- then
- mount $2 &
- fi
-
-}
-
-function setupncidclient
-{
- sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf
-}
-
-function setupnciddaemon {
- cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template
- sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf
-
-}
-
-function setupntp () {
-cat > ${BASE}/etc/ntp.conf << EOF
-# default restrictions
-restrict default noquery notrust nomodify
-# NTP drift file - used to keep track of your system clocks
-# time deviation
-driftfile /etc/ntp.drift
-
-# NTP log file
-logfile /var/log/ntp.log
-# override the default restrictions here, servers that can query
-restrict 192.168.0.0 mask 255.255.0.0 nomodify
-restrict 10.0.0.0 mask 255.0.00 nomodify
-
-#servers to sync with
-EOF
- #this is used for backend or standlone types
- if [ $1 = "1" ]
- then
- echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf
- echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf
- echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf
- echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf
-
- else
- echo "server $dbhost" >> ${BASE}/etc/ntp.conf
- echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf
- fi
-
-
-}
-
-function setupplugins (){
-
-pkglistinstall=""
-pkglistremove=""
-#default enabled
-for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo
-do
-eval pkgvalue=\$${i}
-
-if [ x$pkgvalue = x ]
- then
- pkglistinstall="$pkglistinstall $i$postfix"
- else
- if [ x$pkgvalue = x1 ]
- then
- pkglistinstall="$pkglistinstall $i$postfix"
- else
- pkglistremove="$pkglistremove $i$postfix"
- fi
- fi
-
-
-
-done
-
-
-
-#default disabled
- for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather
- do
-eval pkgvalue=\$${i}
-
-if [ x$pkgvalue = x ]
- then
- pkglistremove="$pkglistremove $i$postfix"
- else
- if [ x$pkgvalue = x1 ]
- then
- pkglistinstall="$pkglistinstall $i$postfix"
- else
- pkglistremove="$pkglistremove $i$postfix"
- fi
- fi
- done
-install="$pkglistinstall $install"
-remove="$pkglistremove $remove"
-
-}
-function LCDcheck () {
- case x$LCDtype in
- xtinker) echo "do nothing lcd "
- ;;
- xno_lcd) echo "no lcd "
- ;;
- xxosd) install="xosd lcdproc $install"
- ;;
- x) echo "lcd empty "
- ;;
- *)
- install="lcdproc $install"
- ;;
-esac
-}
-
-
-function packages () {
-#see which plugins need to be installed
-echo " Starting to install Packages"
-setupplugins
-LCDcheck
-if [ ! -f $PKGBLACKLIST ]
-then
- touch $PKGBLACKLIST
-fi
- for i in $remove
- do
- echo "-----------$i --------------"
- grep -q $i $PKGBLACKLIST
- if [ $? = 1 ]
- then
- pacman -Q $i 2>/dev/null
- #VAR=`pacman -Q $i 2>&1 `
- if [ $? = 0 ]
- then
- if [ $i = "mythweb$postfix" ]
- then
- pacman --noconfirm -R mythweb$postfix
- echo removed $i
- else
- pacman --noconfirm -Rs $i
- echo removed $i
- fi
- fi
- else
- echo "$i is black listed"
- fi
- done
- # fi
-
- for i in $install
- do
- echo "-----------$i --------------"
- grep -q $i $PKGBLACKLIST
- if [ $? = 1 ]
- then
- pacman -Q $i 2>/dev/null
- #VAR=`pacman -Q $i 2>&1 `
- # echo $VAR |grep -vq error:
-
- if [ ! $? = 0 ]
- then
- pacman --noconfirm -Sf $i
- echo installed $i
- else
- echo "$i already installed"
- fi
- else
- echo "$i is black listed"
- fi
- done
-}
-
-function daemons {
-echo "Daemons on boot"
-
- for i in $daemon_remove
- do
- sv check $i 1>/dev/null
- status=$?
- if [ $status -eq 0 ]
- then
- sv down $i
- fi
- remove_service.sh $i
- done
-
-
- for i in $daemon_add
- do
- sv check $i 1>/dev/null
- status=$?
- add_service.sh $i
-
- if [ $status -eq 0 ]
- then
- case $i in
- mysql*) sv hup $i
- ;;
- mythback*) sv hup $i
- ;;
- lirc* ) sv hup $i
- ;;
- frontend) sv check frontend 1>/dev/null
- ;;
-
- smbd ) sv hup $i
- ;;
- nmbd ) sv hup $i
- ;;
- evrouter) sv restart $i
- ;;
- *) sv down $i
- sleep 1
- sv up $i
- ;;
- esac
- fi
-
- done
-
-}
-
-
-function services
-{
-ser_install=""
-ser_daemon_add=""
-ser_remove=""
-ser_daemon_remove=""
-if [ x$UseEvrouter = x1 ]
-then
- ser_daemon_add="evrouter Xvfb $ser_daemon_add"
-else
- ser_daemon_remove="evrouter Xvfb $ser_remove"
-fi
-
-if [ x$RunDHCP = x1 ]
-then
- ser_daemon_add="dnsmasq $ser_daemon_add"
- ser_install="dnsmasq mvpmc $ser_install"
-
-else
- ser_daemon_remove="dnsmasq $ser_daemon_remove"
- ser_remove="dnsmasq mvpmc $ser_remove"
-fi
-
-if [ x$RunFrontend = x1 ]
-then
- ser_daemon_add="frontend hal $ser_daemon_add"
- ser_install=" $ser_install"
- showX=true
- else
- ser_daemon_remove="frontend hal $ser_daemon_remove"
- ser_remove="$ser_remove"
- fi
-
-if [ x$UseMythWEB = x1 ]
-then
- ser_install="lighttpd mythweb$postfix $ser_install"
- ser_daemon_add="lighttpd $ser_daemon_add"
- else
- ser_remove="mythweb$postfix $ser_remove"
- ser_daemon_remove="$ser_daemon_remove"
- fi
-
-#samba
-if [ x$UseSamba = x1 ]
-then
- ser_install="samba $ser_install"
- ser_daemon_add="nmbd smbd $ser_daemon_add "
- if [ x$Samba_mediareadonly = x1 ]
- then
- smreadonly="no"
- else
- smreadonly="yes"
- fi
-
- if [ x$Samba_homereadonly = x1 ]
- then
- shreadonly="no"
- else
- shreadonly="yes"
- fi
-
- if [ ! -d ${BASE}/etc/samba ]
- then
- mkdir ${BASE}/etc/samba
- fi
-
- if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ]
- then
- install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf
- else
- sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \
- -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf
-
- if [ x$Samba_media = "x1" ]
- then
- echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf
- sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media
- fi
-
- if [ x$Samba_home = "x1" ]
- then
- echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf
- sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home
-
- fi
-
- fi
-else
- ser_remove="samba $ser_remove"
- ser_install="smbclient $ser_install"
- ser_daemon_remove="smbd nmbd $ser_daemon_remove"
-fi
-
-
-if [ x$UseNFS = x1 ]
-then
- ser_install="nfs-utils portmap $ser_install"
- ser_daemon_add="nfsd nfslock portmap $ser_daemon_add"
- sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports
-
-else
- ser_remove="$ser_remove"
- ser_daemon_remove="nfsd nfslock $ser_daemon_remove"
-fi
-
-if [ x$Runncidd = x1 ]
-then
- ser_daemon_add="ncidd ncid $ser_daemon_add"
- ser_install="ncid $ser_install"
- else
- ser_daemon_remove="ncidd ncid $ser_daemon_remove"
- ser_remove="ncid $ser_remove"
- fi
-
-#Setting the default, just to avoid the or statement..
-if [ x$UseHobbit = x ]
-then
- UseHobbit=0
-fi
-
-if [ x$UseHobbit = x1 ]
-then
- case $SystemType in
- Standalone|Master_backend )
- ser_daemon_add="hobbit $ser_daemon_add"
- ser_install="hobbitserver $ser_install"
- ;;
-
- *) ser_daemon_add="hobbit-client $ser_daemon_add"
- ser_install="hobbit-client $ser_install"
- ;;
- esac
-else
- ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove"
- ser_remove="hobbit-client hobbitserver $ser_remove"
- rm -f /data/srv/httpd/htdocs/hobbit/index.html
-
- fi
-
-
-
-}
-
-
-
-function setupsleep {
-if [ x$AutoShutdown = x1 ]
-then
- cronshutdowntime=""
- if [ x$Shutdowntime != x-1 ]
- then
- cronshutdowntime=$Shutdowntime
- fi
- if [ x$Shutdowntime2 != x-1 ]
- then
- if [ x$cronshutdowntime = x ]
- then
- cronshutdowntime=$Shutdowntime2
- else
- cronshutdowntime="${cronshutdowntime},${Shutdowntime2}"
- fi
- fi
-
- sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv
-else
- sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv
-fi
-
-}
-
-
-function setuppacman () {
-#setup link to httpd dir
-echo "Configuring pacman"
- if [ ! x$1 = x ]
- then
- ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo
- echo "creating the link for the pacman repo mirror"
- fi
-
- for i in mv-core mv-core-testing mv-extra mv-extra-testing
- do
- echo "[$i]" > ${BASE}/etc/pacman.d/$i
- #add mirror if needed
- if [ x$PKG_MIRROR = x1 ]
- then
- echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i
- fi
- #add user templates
- USERTEMPLATES="/data/home/mythtv/templates"
- if [ -f $USERTEMPLATES/sources/$i ]
- then
- echo "Adding user $i"
- cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i
- fi
- cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i
- echo "setting local mirror to $dbhost for $i "
- done
-
- #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg
-
-
-}
-
-
-function setupzipcode () {
- if [ ! x$zipcode = x ]
- then
- ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode
- fi
-}
-
-function process_nfsmap () {
-#first look for a local copy of nfsmap
-if [ $1 = noip ]
-then
- if [ -f /data/home/mythtv/templates/nfsmap ]
- then
- NFSMAP="/data/home/mythtv/templates/nfsmap"
- else
- mv -f /tmp/nfsmap /tmp/nfsmap.old
- wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap
- if [ $? = 0 ]
- then
- NFSMAP="/tmp/nfsmap"
- fi
- fi
-else
- mv -f /tmp/nfsmap /tmp/nfsmap.old
- wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap
- if [ $? = 0 ]
- then
- NFSMAP="/tmp/nfsmap"
- fi
-fi
-
- if [ -f $NFSMAP ]
- then
- #read in file
- while read line
- do
- NFSserver=`echo "$line"|cut -d" " -f1`
- NFSmount=`echo "$line"|cut -d" " -f2`
- setupfstab $NFSserver $NFSmount
- done <$NFSMAP
- else
- echo "couldn't find nfsmap"
-
- fi
-}
-
-function setupcnfs () {
- scrubnfs
- if [ $HaveCentralNFS = "yes" ]
- then
- case x$NFSserver in
- xfile:nfsmap )
- process_nfsmap noip
- ;;
- *:nfsmap )
- nfsmapip=`echo "$NFSserver" | cut -d: -f1 `
- process_nfsmap $nfsmapip
- ;;
- *) setupfstab $NFSserver $NFSmount
- esac
-
- #if [ ! x"$NFSserver" = "xfile:nfsmap" ]
- #then
- # setupfstab $NFSserver $NFSmount
- #else
- # process_nfsmap
- #fi
- else
- echo "fe_nfs"
- #if no central nfs found, then use the mbe.
- if [ $SystemType = "Frontend_only" ]
- then
- setupfstab ${dbhost}:/data/media /data/media
- fi
- fi
-
-}
-
-function setupbootsplash () {
-
-if [ x$Usebootsplash = x1 ]
-then
- COMMAND="%s/^default.*0/default 1/g"
-else
- COMMAND="%s/^default.*1/default 0/g"
-fi
-
-ex ${BASE}/boot/grub/menu.lst <<EOF
-:$COMMAND
-:wq
-EOF
-
-}
-
-function setuphobbitclient () {
-COMMAND="%s/^BBDISP=.*$/BBDISP=$dbhost/g"
-
-
-ex ${BASE}/data/srv/hobbit/client/etc/hobbitclient.cfg <<EOF
-:$COMMAND
-:wq
-EOF
-
-}
-
-function setupSyslog () {
-COMMAND="%s/^destination d_remote.*$/destination d_remote \{tcp\(\"${dbhost}\" port\(514\)\) \;\} \;/"
-ex ${BASE}/etc/syslog-ng.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-
-
-}
-
-function setupfuncminion () {
-COMMAND="%s/^certmaster.*$/certmaster = ${dbhost}/"
-ex ${BASE}/etc/func/minion.conf <<EOF
-:$COMMAND
-:wq
-EOF
-}
-
-function setupDNSMASQ(){
-if [ x$RunDHCP = x1 ]
-then
- echo "DNSMASQ setup"
-
-#set default route to my GW
-COMMAND="%s/^dhcp-option=3.*$/dhcp-option=3,${route}/"
-ex ${BASE}/etc/dnsmasq.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-#setup dns to my ip
-COMMAND="%s/^dhcp-option=6.*$/dhcp-option=6,${ip}/"
-ex ${BASE}/etc/dnsmasq.conf <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-#change nfsroot to my ip
-COMMAND="%s/nfsroot=.*:/nfsroot=${ip}:/"
-ex ${BASE}/data/srv/tftp/pxelinux.cfg/default <<EOF
-:$COMMAND
-:wq
-EOF
-
-#add 127.0.0.1 to /etc/resolv.conf
- echo "search lan" > ${BASE}/etc/resolv.conf
- echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf
- echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf
-fi
-
-#setup dongle.config
-COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /"
-ex ${BASE}/data/srv/tftp/dongle.bin.config <<EOF
-:$COMMAND
-:wq
-EOF
-
-
-
-#setup dongle.config
-
-}
-
-function reloadfe(){
- PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'`
- /usr/bin/backend_control.sh clearcache behost $dbhost
- if [ x$RESTART_LCD = xtrue ]
- then
- killall -9 mythlcdserver
- fi
- kill -s USR1 $PID
-
-}
-
-
-function setup_db (){
-
- install="mysql avahli"
- daemon_add="mysql"
- packages
- daemons
-status=1
-mysqlstatus=1
-while [ ! $status = 0 ]
-do
- sv stop mysql
- sleep 1
- sv start mysql
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql -e "show databases;"
- showstatus=$?
- if [ $showstatus = 0 ]
- then
- pacman --noconfirm -R mythdb-initial
- pacman --noconfirm -S mythdb-initial
- $MV_ROOT/bin/restore_default_settings.sh -c load
- if [ $SystemType = "Master_backend" ]
- then
- $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost
- fi
- #update database to allow user jobs on this host.
- $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW
- $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL
- if [ -d /data/srv/mysql/mythconverg ]
- then
- pacman --noconfirm -R webcalendar
- pacman --noconfirm --nodeps -S webcalendar
- status=0
- fi
- fi
- fi
-done
-}
-
-
-#----------------------------------------------------MAIN PROGRAM-------------------------------------------
-#misc,sleep,hostype,advanced,audio
-eval LAST=\$$#
-LIST=`echo $LAST | tr , " " `
-
-hosttypechange="false"
-
-
-for i in $LIST
- do
- echo $i
- case $i in
- misc) showmisc="true"
- ;;
- sleep) showsleep="true"
- ;;
- hostype) showhost="true"
- showX="true"
- ;;
- hostypec) hosttypechange="true"
- ;;
- advanced) showadvanced="true"
- #showhost="true"
- ;;
- audio) showaudio="true"
- ;;
- network) shownetwork="true"
- ;;
- advancedX) showX="true"
- ;;
- restartfe) killall -9 mythfrontend
- killall -9 mythwelcome
- exit 0
- ;;
- reloadfe) reloadfe
- ;;
-
- this_is_install) MV_NEW_INSTALL="true"
- ;;
-
- esac
- done
-
-if [ x$MV_NEW_INSTALL = xtrue ]
-then
- hosttypechange="false"
-fi
-
-
-
-# exit 1
-
-#network
-if [ x"$shownetwork" = xtrue ]
-then
- OLDHOSTNAME=`hostname`
- NEWHOSTNAME=$hostname
- if [ ! $OLDHOSTNAME = $NEWHOSTNAME ]
- then
-
- ${MV_ROOT}/bin/restore_default_settings.sh -cuhostname -o -h$OLDHOSTNAME
- RESTART_FE="true"
- hostname $NEWHOSTNAME
- if [ $SystemType != "Frontend_only" ]
- then
- sv restart mythbackend
- fi
-
- fi
-
- setup_network
- CMDLINE=$(cat /proc/cmdline)
- echo $CMDLINE |grep -q netboot
- NETBOOT=$?
- if [ x$NETBOOT = x1 ]
- then
- echo "loading network"
- ${BASE}/etc/net/scripts/network.init reload
- else
- echo "netboot, will not start network"
- fi
-fi
-
-
-if [ x$showhost = "xtrue" ]
-then
-case $SystemType in
- Standalone)
- setupntp 1
- services
- if [ x$hosttypechange = "xtrue" ]
- then
- setup_db
- fi
- if [ -f ${BASE}/etc/avahi/services/mysql.service ]
- then
- rm -f ${BASE}/etc/avahi/services/mysql.service
- sudo sv restart avahi
- fi
-
- install="mysql mythdb-initial avahli portmap local-website $ser_install"
-
-
- remove="none $ser_remove"
-
- daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add"
- daemon_remove="none $ser_daemon_remove"
-
- ;;
- Master_backend)
- setupntp 1
- services
-
- if [ ! -f ${BASE}/etc/avahi/services/mysql.service ]
- then
- mkdir ${BASE}/etc/avahi/services
- cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service
- sudo sv restart avahi
- fi
-
- install="mysql mythdb-initial avahi portmap local-website myth2ipod mythtv-status $ser_install "
- remove="$ser_remove"
-
- daemon_add="mysql mythbackend avahi portmap lighttpd $ser_daemon_add"
- daemon_remove="$ser_daemon_remove"
- ;;
- Slave_backend)
- setupntp 0
- services
- if [ x$hosttypechange = "xtrue" ]
- then
- setup_db
- fi
- if [ -f ${BASE}/etc/avahi/services/mysql.service ]
- then
- rm -f ${BASE}/etc/avahi/services/mysql.service
- sudo sv restart avahi
- fi
-
- #cp $TEMPLATES/mysql.service ${BASE}/etc/avahi/services/mysql.service
- install="mysql avahi local-website $ser_install "
- remove=" $ser_remove"
-
- daemon_add="mythbackend avahi portmap lighttpd $ser_daemon_add"
- daemon_remove="$ser_daemon_remove"
- ;;
- Frontend_only)
- #Add values for services
- setupntp 0
- services
- if [ -f ${BASE}/etc/avahi/services/mysql.service ]
- then
- rm -f ${BASE}/etc/avahi/services/mysql.service
- sudo sv restart avahi
- fi
-
- install="libmysqlclient mysql-clients portmap avahi local-website $ser_install"
- remove="mysql mythweb$postfix $ser_remove"
-
- daemon_add="avahi portmap lighttpd $ser_daemon_add "
- daemon_remove="mysql mythbackend $ser_daemon_remove"
- ;;
-
-
-esac
-#setupSyslog
-
-fi
-
-#apply these to ALL types
-
-
-
-
-#systemtype
-
-if [ x$showhost = "xtrue" ]
-then
- setupmysqlnetwork
- setupmysql
- setupremote
- #grab the new dbhost key
- #/usr/bin/grabkey.py
-fi
-
-#audio
-
-if [ x$showaudio = "xtrue" ]
-then
- #setupsoundtype
- if [ ! x$Audiotype = xtinker ]
- then
- ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice
- fi
-fi
-
-#should always run
-packages
-
-#misc
-
-if [ x$showmisc = "xtrue" ]
-then
- setupzipcode
- settimezone
- setupcnfs
-fi
-
-#sleep
-if [ x$showsleep = "xtrue" ]
-then
- setupsleep
-fi
-
-if [ x$showX = "xtrue" ]
-then
- ${MV_ROOT}/bin/xconfig.sh
-fi
-
-#advanced
-if [ x$showadvanced = "xtrue" ]
-then
- if [ ! x$showhost = "xtrue" ]
- then
- services
- install="none $ser_install"
- remove="none $ser_remove"
- daemon_add=" none $ser_daemon_add"
- daemon_remove="none $ser_daemon_remove"
- packages
-
-
- if [ x$SystemType = xMaster_backend ]
- then
- setuppacman link
- else
- setuppacman
- fi
- fi
- setupncidclient
- setupnciddaemon
- setupbootsplash
- setuphobbitclient
- setupreceiver
- setupevrouter
- setupblaster
- setupLCD
- setupDNSMASQ
-
-fi
-
-
-
-daemons
-#add check for lcd, and restart if needed.
-
-if [ x$RESTART_FE = xtrue ]
-then
- reloadfe
-fi
-
-
-
-
-
-case $SystemType in
- Standalone) smoltsystem=6
- MVRELEASE="$MVRELEASE (Standalone)"
- ;;
- Master_backend)
- if [ x$RunFrontend = x1 ]
- then
- smoltsystem=2
- MVRELEASE="$MVRELEASE (MBE with Frontend)"
- else
- smoltsystem=1
- MVRELEASE="$MVRELEASE (MBE)"
- fi
- ;;
- Slave_backend)
- if [ x$RunFrontend = x1 ]
- then
- smoltsystem=5
- MVRELEASE="$MVRELEASE (SLAVE with Frontend)"
- else
- smoltsystem=5
- MVRELEASE="$MVRELEASE (SLAVE)"
- fi
- ;;
- Frontend_only)
- smoltsystem=3
- MVRELEASE="$MVRELEASE ( Frontend only)"
- ;;
-esac
-echo $MVRELEASE > /etc/os_myth_release
-echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info
-echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info
-
diff --git a/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
deleted file mode 100644
index d49fbf6..0000000
--- a/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-#
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-# Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=shuttleVFD
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as. LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-# specific setup! Otherwise LCDd won't be able to find
-# the driver modules and will thus not be able to
-# function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50 # Brightness (in %) if applicable
-Contrast=50 # Contrast (in %) if applicable
-Backlight=no # Backlight if applicable
-UpsideDown=no # flip image upside down
-Invert=no # invert light/dark pixels
-ShowDebugFrame=no # turns on/off 1 pixel thick debugging
- # border whithin the usable text area,
- # for setting up TextResolution and
- # MinFontFaceSize (if using FT2);
-ShowBigBorder=no # border around the unused area
-ShowThinBorder=yes # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-# KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-# KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname Function
-# Normal context Menu context
-# ------- -------------- ------------
-# PauseKey Pause/Continue Enter/select
-# BackKey Back(Go to previous screen) Up/Left
-# ForwardKey Forward(Go to next screen) Down/Right
-# MainMenuKey Open main menu Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-# as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-# is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's. ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf
deleted file mode 100644
index 2596c25..0000000
--- a/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-#
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-# Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=imon
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as. LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-# specific setup! Otherwise LCDd won't be able to find
-# the driver modules and will thus not be able to
-# function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50 # Brightness (in %) if applicable
-Contrast=50 # Contrast (in %) if applicable
-Backlight=no # Backlight if applicable
-UpsideDown=no # flip image upside down
-Invert=no # invert light/dark pixels
-ShowDebugFrame=no # turns on/off 1 pixel thick debugging
- # border whithin the usable text area,
- # for setting up TextResolution and
- # MinFontFaceSize (if using FT2);
-ShowBigBorder=no # border around the unused area
-ShowThinBorder=yes # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-# KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-# KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname Function
-# Normal context Menu context
-# ------- -------------- ------------
-# PauseKey Pause/Continue Enter/select
-# BackKey Back(Go to previous screen) Up/Left
-# ForwardKey Forward(Go to next screen) Down/Right
-# MainMenuKey Open main menu Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-# as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-# is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's. ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/modules b/abs/core-testing/live-installer/templates/LCD/Silverstone/modules
deleted file mode 100644
index cd576c3..0000000
--- a/abs/core-testing/live-installer/templates/LCD/Silverstone/modules
+++ /dev/null
@@ -1 +0,0 @@
-lirc_imon #LCD
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf
deleted file mode 100644
index 2596c25..0000000
--- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf
+++ /dev/null
@@ -1,869 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-#
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-# Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne,
-# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman,
-# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x,
-# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD,
-# sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=imon
-#Driver=curses
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as. LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-# specific setup! Otherwise LCDd won't be able to find
-# the driver modules and will thus not be able to
-# function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-# Set the initial off-brightness [default: 0; legal: 0 - 255]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-
-## optional:
-Brightness=50 # Brightness (in %) if applicable
-Contrast=50 # Contrast (in %) if applicable
-Backlight=no # Backlight if applicable
-UpsideDown=no # flip image upside down
-Invert=no # invert light/dark pixels
-ShowDebugFrame=no # turns on/off 1 pixel thick debugging
- # border whithin the usable text area,
- # for setting up TextResolution and
- # MinFontFaceSize (if using FT2);
-ShowBigBorder=no # border around the unused area
-ShowThinBorder=yes # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-# KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-# KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname Function
-# Normal context Menu context
-# ------- -------------- ------------
-# PauseKey Pause/Continue Enter/select
-# BackKey Back(Go to previous screen) Up/Left
-# ForwardKey Forward(Go to next screen) Down/Right
-# MainMenuKey Open main menu Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-# NOTE: The driver will ignore this if the display is a vfd or vkd
-# as they crash if the backlight is turned off
-Backlight=yes
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-# is a vfd or vkd as they don't have this feature
-Contrast=800
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# The following table translates from MtxOrb key letters to logical key namess.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446)
-# Note: G321D is the only one that is tested currently.
-Type=G321D
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's. ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-# EOF
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf
deleted file mode 100644
index ce64936..0000000
--- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf
+++ /dev/null
@@ -1,38 +0,0 @@
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007
-#
-# contributed by
-#
-# brand: /tmp/out
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name Antec_fusion_silver_v1
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- post_data_bits 16
- post_data 0xFF
- gap 131985
- min_repeat 6
- toggle_bit 0
-
-
- begin codes
- CW 0x0001
- CCW 0x0100
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc
deleted file mode 100644
index 7a39704..0000000
--- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc
+++ /dev/null
@@ -1,15 +0,0 @@
-begin
- remote = Antec_fusion_silver_v1
- prog = mythtv
- button = CW
- repeat = 1
- config = ]
-end
-
-begin
- remote = Antec_fusion_silver_v1
- prog = mythtv
- button = CCW
- repeat = 1
- config = [
-end
diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules b/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules
deleted file mode 100644
index cd576c3..0000000
--- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules
+++ /dev/null
@@ -1 +0,0 @@
-lirc_imon #LCD
diff --git a/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf
deleted file mode 100644
index 5b37bd7..0000000
--- a/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf
+++ /dev/null
@@ -1,957 +0,0 @@
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-#
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifiying them in a driver= line in the
-# server section, like:
-#
-# Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving af File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65,
-# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior,
-# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x,
-# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS,
-# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd
-Driver=xosd
-
-# Tells the driver to bind to the given interface
-Bind=127.0.0.1
-
-# Listen on this specified port; defaults to 13666.
-Port=13666
-
-# Sets the reporting level; defaults to 2 (warnings and errors only).
-ReportLevel=3
-
-# Should we report to syslog instead of stderr ? Default: no
-#ReportToSyslog=yes
-
-# Sets the default time in seconds to displays a screen.
-WaitTime=5
-
-# User to run as. LCDd will drop its root priviledges,
-# if any, and run as this user instead.
-User=nobody
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active.
-#ServerScreen=no
-
-# The server will stay in the foreground if set to true.
-#Foreground=no
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-# specific setup! Otherwise LCDd won't be able to find
-# the driver modules and will thus not be able to
-# function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/lcdproc/
-
-# GoodBye message: each entry represents a display line; default: builtin
-#GoodBye="Thanks for using"
-#GoodBye=" LCDproc!"
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client.
-# These are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-# If you have only 4 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-#NextScreenKey=Down
-
-# If you have only 3 keys, you can choose to use this:
-#ToggleRotateKey=Enter
-#PrevScreenKey=Up
-
-
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# The following works excellent with 4 keys or more.
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-# If you have 6 keys you may define these as well
-#LeftKey=Left
-#RightKey=Right
-
-# If you have only 3 keys, you could use something like this:
-#MenuKey=Escape
-#EnterKey=Enter
-#DownKey=Down
-
-
-
-### Driver sections are below this line, in alphabetical order ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz633 driver (for CF633 only) ##
-[CFontz633]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD type (size) [default: 16x2]
-Size=16x2
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=19200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## CrystalFontz packet driver (for CF631, CF633 & CF635) ##
-[CFontzPacket]
-
-# Select the LCD model [default: 633; legal: 631, 633, 635]
-Model=635
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=115200
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-# Currently this flag is not in use, there is no such thing as NewFirmware. ;=)
-#NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# I want to reboot the LCD to make sure we start from a known state
-Reboot=yes
-
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x4
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal, yes, no]
-UseACS=no
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 1602]
-Model=12232
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2]
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits to test keypad assignement
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
-[ea65]
-
-# Device is fixed /dev/ttyS1
-# Width and Height are fixed 9x1
-
-# As the VFD is self luminescent we don't have a backlight
-# But we can use the backlight functions to control the front LEDs
-# Brightness 0 to 299 -> LEDs off
-# Brightness 300 to 699 -> LEDs half bright
-# Brightness 700 to 1000 -> LEDs full bright
-Brightness=500
-# OffBrightness is the the value used for the 'backlight off' state
-OffBrightness=0
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-#Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolutioni
-# and the minimum available font face size in pixels, then
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minumum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-## optional:
-Brightness=50 # Brightness (in %) if applicable
-Contrast=50 # Contrast (in %) if applicable
-Backlight=no # Backlight if applicable
-UpsideDown=no # flip image upside down
-Invert=no # invert light/dark pixels
-ShowDebugFrame=no # turns on/off 1 pixel thick debugging
- # border whithin the usable text area,
- # for setting up TextResolution and
- # MinFontFaceSize (if using FT2);
-ShowBigBorder=no # border around the unused area
-ShowThinBorder=yes # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 560; legal: 0 - 1000]
-Contrast=560
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-
-# Select what type of connection. See documentation for types.
-ConnectionType=4bit
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device of the serial interface (default is /dev/lcd)
-Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-Keypad=no
-
-# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000]
-Contrast=0
-
-# If you have a switchable backlight.
-Backlight=no
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-OutputPort=no
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-# This flag is NOT the old obsolete Extended option.
-#ExtendedMode=yes
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ]
-Charmap=hd44780_default
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
-# is still alive. When set to a value bigger then null the character in the
-# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
-#KeepAliveDisplay=0
-
-# If you experience occasional garbage on your display you can use this
-# option as workaround. If set to a value bigger than null it forces a
-# full screen refresh <RefreshDiplay> seconds. Default: 0.
-#RefreshDisplay=5
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-# KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-# KeyMatrix_1_3=Enter
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-
-
-
-## ICP A106 driver ##
-[icp_a106]
-Device=/dev/ttyS1
-
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number [exactly as listed by usbview]
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# Specifies if the last line is pixel addressable or it controls an
-# underline effect. [default: true (= pixel addressable); legal: yes, no]
-#Lastline=true
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-
-
-## IrMan driver ##
-[IrMan]
-#if in trouble with IrMan, try Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname Function
-# Normal context Menu context
-# ------- -------------- ------------
-# PauseKey Pause/Continue Enter/select
-# BackKey Back(Go to previous screen) Up/Left
-# ForwardKey Forward(Go to next screen) Down/Right
-# MainMenuKey Open main menu Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-# is a vfd or vkd as they don't have this feature
-Contrast=480
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# The following table translates from MtxOrb key letters to logical key names.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Specifies the size of the LCD.
-Size=20x4
-
-# set the brightness
-Brightness=255
-
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# re-initialize VFD ?
-#Reboot=yes
-
-
-
-## Mini-box.com picoLCD (usblcd) driver ##
-[picolcd]
-# This is for the Mini-Box.com usblcd device that ships with the M300. It can
-# also be purchased separately but this driver has only been tested on the M300
-# setup.
-
-# KeyTimeout is the time that LCDd spends waiting for a key press before cycling
-# through other duties. Higher values make LCDd use less CPU time and make
-# key presses more detectable. Lower values make LCDd more responsive but a
-# little prone to missing key presses. 500 (.5 second) is the default and a
-# balanced value.
-KeyTimeout=500
-
-# Contrast: [default: 1000; legal: 0 - 1000]
-Contrast=1000
-
-# Light the keys? i[default: on; legal: on, off]
-Keylights=on
-
-# If Keylights is on, the you can unlight specific keys below:
-# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys.
-# There is no LED for the +/- keys. This is a handy way to indicate to users
-# which keys are disabled. [default: on; legal: on, off]
-Key0Light=on
-Key1Light=on
-Key2Light=on
-Key3Light=on
-Key4Light=on
-Key5Light=on
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
-# Note: Currently only tested with G321D & SP14Q002.
-Type=G321D
-
-# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
-CellSize=6x10
-
-# Select what type of connection [legal: classic, bitshaker; default: classic]
-ConnectionType=classic
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-
-
-## serial POS display driver ##
-[serialPOS]
-
-# Device to use in serial modea [default: /dev/lcd]
-Device=/dev/lcd
-
-# Specifies the size of the display in characters. [default: 16x2]
-Size=16x2
-
-# Set the communication protocol to use with the POS display.
-# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate]
-Type=AEDEX
-
-# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200]
-Speed=9600
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's. ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# (* most should work, not testet yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)]
-use_parallel=no
-
-# Number of Custom-Characters [default: displaytype dependent]
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes]
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size [default: 20x6]
-Size=20x6
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Is ECP mode on? [default: yes; legal: yes, no]
-#ECPlpt=yes
-
-# Use graphics? [default: no; legal: yes, no]
-#graphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# font to use, in XLFD format, as given by "xfontsel"
-Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-*
-
-
-# EOF
diff --git a/abs/core-testing/live-installer/templates/cc.orig.sh b/abs/core-testing/live-installer/templates/cc.orig.sh
deleted file mode 100755
index d8fd2dc..0000000
--- a/abs/core-testing/live-installer/templates/cc.orig.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/usr/bin/perl
-# rwraithr added segment for 4 digit channels
-# make sure to set this string to
-# the corresponding remote in /etc/remoted.conf
-#$remote_name = "RC-u43c-1h";
-$remote_name = "$REMOTE_NAME";
-
-sub change_channel {
- my($channel_digit) = @_;
- system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit");
- sleep .5;
-}
-
-$channel=$ARGV[0];
-sleep 1;
-if (length($channel) > 3) {
- change_channel(substr($channel,0,1));
- change_channel(substr($channel,1,1));
- change_channel(substr($channel,2,1));
- change_channel(substr($channel,3,1));
-} elsif (length($channel) > 2) {
- change_channel(substr($channel,0,1));
- change_channel(substr($channel,1,1));
- change_channel(substr($channel,2,1));
-} elsif (length($channel) > 1) {
- change_channel(substr($channel,0,1));
- change_channel(substr($channel,1,1));
-} else {
- change_channel(substr($channel,0,1));
-}
-system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT");
-
-#system ("sleep 2");
-#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2");
-#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2");
diff --git a/abs/core-testing/live-installer/templates/cc.sh b/abs/core-testing/live-installer/templates/cc.sh
deleted file mode 100755
index 0cce308..0000000
--- a/abs/core-testing/live-installer/templates/cc.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-/usr/local/bin/cc.orig.sh $@ &
-/usr/local/bin/cc_vol.sh &
-
-
diff --git a/abs/core-testing/live-installer/templates/cc_vol.sh b/abs/core-testing/live-installer/templates/cc_vol.sh
deleted file mode 100755
index 819008d..0000000
--- a/abs/core-testing/live-installer/templates/cc_vol.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-sleep 2
-/usr/local/bin/ivtvctl -p 2 -d /dev/video2
-/usr/local/bin/ivtvctl -p 1 -d /dev/video2
-
diff --git a/abs/core-testing/live-installer/templates/change_chan.sh b/abs/core-testing/live-installer/templates/change_chan.sh
deleted file mode 100755
index 5ad8765..0000000
--- a/abs/core-testing/live-installer/templates/change_chan.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-REMOTE_NAME=SA3250
-cmd="$1"
-
-case $cmd in
- [0-9]*)
- for digit in $(echo $1 | sed -e 's/./& /g'); do
- irsend SEND_ONCE $REMOTE_NAME $digit
- sleep 0.3
- # If things work OK with sleep 1, try this for faster channel changes:
- # sleep 0.3
- done
- ;;
-
- *)
- irsend SEND_ONCE $REMOTE_NAME $cmd
- ;;
- esac
-# /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/live-installer/templates/cron.template b/abs/core-testing/live-installer/templates/cron.template
deleted file mode 100644
index 3fcea10..0000000
--- a/abs/core-testing/live-installer/templates/cron.template
+++ /dev/null
@@ -1,4 +0,0 @@
-# <minute> <hour> <day> <month> <dow> <command>
-
-
-00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address
deleted file mode 100644
index 1df28d2..0000000
--- a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address
+++ /dev/null
@@ -1,2 +0,0 @@
-192.168.1.158/24
-
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route
deleted file mode 100644
index 373a4d1..0000000
--- a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route
+++ /dev/null
@@ -1,2 +0,0 @@
-default via 192.168.1.1
-
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig b/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig
deleted file mode 100644
index b1f14e0..0000000
--- a/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-essid home_lan
-#key ababababab
diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/options b/abs/core-testing/live-installer/templates/etcnet/eth/options
deleted file mode 100644
index 929da58..0000000
--- a/abs/core-testing/live-installer/templates/etcnet/eth/options
+++ /dev/null
@@ -1,7 +0,0 @@
-# If you want to change current interface name, edit /etc/net/iftab,
-# rename current directory and uncomment this line:
-TYPE=eth
-DISABLED=no
-BOOTPROTO=dhcp
-ONBOOT=yes
-CONFIG_WIRELESS=no
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-4 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-4
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-8 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-8
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full b/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full
deleted file mode 100644
index e69de29..0000000
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac
deleted file mode 100644
index 0e3a708..0000000
--- a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac
+++ /dev/null
@@ -1,3 +0,0 @@
-"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh"
-"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject"
-
diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid
deleted file mode 100644
index 7cb2e34..0000000
--- a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid
+++ /dev/null
@@ -1,3 +0,0 @@
-"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh"
-"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject"
-
diff --git a/abs/core-testing/live-installer/templates/exports.template b/abs/core-testing/live-installer/templates/exports.template
deleted file mode 100644
index b946287..0000000
--- a/abs/core-testing/live-installer/templates/exports.template
+++ /dev/null
@@ -1,8 +0,0 @@
-# /etc/exports
-#
-# See exports(5) for a description.
-
-# use exportfs -arv to reread
-/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
-/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000)
-
diff --git a/abs/core-testing/live-installer/templates/fstab.conf.template b/abs/core-testing/live-installer/templates/fstab.conf.template
deleted file mode 100755
index d27bcd9..0000000
--- a/abs/core-testing/live-installer/templates/fstab.conf.template
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# /etc/fstab: static file system information
-#
-# <file system> <dir> <type> <options> <dump> <pass>
-none /dev/pts devpts defaults 0 0
-none /dev/shm tmpfs defaults 0 0
-
-/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
-/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
-/dev/fd0 /mnt/fl vfat user,noauto 0 0
-
-/dev/sda1 / reiserfs defaults 0 1
-/dev/sda2 swap swap defaults 0 0
-/dev/sda3 /data reiserfs defaults 0 0
-192.168.1.6:/media /data/media nfs
-
diff --git a/abs/core-testing/live-installer/templates/mysql.service b/abs/core-testing/live-installer/templates/mysql.service
deleted file mode 100644
index 160450e..0000000
--- a/abs/core-testing/live-installer/templates/mysql.service
+++ /dev/null
@@ -1,13 +0,0 @@
-<?xml version="1.0" standalone='no'?><!--*-nxml-*-->
-<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
-
-<service-group>
-
- <name replace-wildcards="yes">mysql_myth on %h</name>
-
- <service>
- <type>_mysql._tcp</type>
- <port>3306</port>
- </service>
-
-</service-group>
diff --git a/abs/core-testing/live-installer/templates/mysql.txt b/abs/core-testing/live-installer/templates/mysql.txt
deleted file mode 100755
index 04531b5..0000000
--- a/abs/core-testing/live-installer/templates/mysql.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-DBHostName=127.0.0.1
-DBUserName=mythtv
-DBPassword=mythtv
-DBName=mythconverg
-DBType=QMYSQL3
-
-# Set the following if you want to use something other than the
-# machine's real hostname for identifying settings in the database.
-# This is useful if your hostname changes often, as otherwise
-# you'll need to reconfigure mythtv (or futz with the DB) every time.
-# TWO HOSTS MUST NOT USE THE SAME VALUE
-#
-#LocalHostName=my-unique-identifier-goes-here
-
-# If you want your frontend to be able to wake your MySQL server
-# using WakeOnLan, have a look at the following settings:
-#
-# Set the time the frontend waits (in seconds) between reconnect tries.
-# This should be the rough time your MySQL server needs for startup
-#WOLsqlReconnectWaitTime=0
-#
-#
-# This is the amount of retries to wake the MySQL server until the frontend
-# gives up
-#WOLsqlConnectRetry=5
-#
-#
-# This is the command executed to wake your MySQL server.
-#WOLsqlCommand=echo 'WOLsqlServerCommand not set'
diff --git a/abs/core-testing/live-installer/templates/ncid.conf.template b/abs/core-testing/live-installer/templates/ncid.conf.template
deleted file mode 100755
index 43ef490..0000000
--- a/abs/core-testing/live-installer/templates/ncid.conf.template
+++ /dev/null
@@ -1,51 +0,0 @@
-# tcl/tk configuration file
-
-# Directory NCID uses to find the helper scripts
-set ProgDir /usr/share/ncid
-
-# default helper script
-set EXTPROG ncid-osd
-
-# Set Host to the NCID server address
-# Host defaults to 127.0.0.1
-#set Host 127.0.0.1
-set Host 192.168.1.5
-
-# The NCID port default is 3333
-set Port 3333
-
-# If the connection to the server is lost,
-# try every Delay seconds to reconnect
-# The Default: 60
-set Delay 20
-
-# If set to 1, display raw data received from the NCID server
-# If set to 0, do not display raw data received from the NCID server
-# Default: 0
-set Raw 0
-
-# If set to 1, output: date time number name
-# If set to 0, output: name number
-# Default: 0
-set All 1
-
-# If set to 1, display formatted CID, and CID log file on connect
-# If set to 0, ddo not isplay formatted CID, and CID log file on connect
-# Default: 0
-set Verbose 0
-
-# If set to 1, display information in terminal progran or external program
-# If set to 0, display information using a GUI
-# Default: 0
-set NoGUI 1
-
-# output name and number to external program
-# Default: 0
-set Callprog 1
-
-# ring number to call external program
-# Default: 0
-set CallOnRing 0
-
-# external called program
-set Program [list $ProgDir/$EXTPROG]
diff --git a/abs/core-testing/live-installer/templates/ncidd.conf.template b/abs/core-testing/live-installer/templates/ncidd.conf.template
deleted file mode 100644
index daa2e79..0000000
--- a/abs/core-testing/live-installer/templates/ncidd.conf.template
+++ /dev/null
@@ -1,143 +0,0 @@
-# ncid - Network CallerID Server Config File
-
-################################
-# Definitions and Line formats #
-################################
-
-# lines can be blank, or start with the words: send, set #
-#
-# A line is divided into words, separated by spaces
-#
-# A word is either a string of non-blank characters, everything
-# between double quotes, or an equal sign.
-#
-# SEND LINE FORMAT:
-# send DATATYPE [DATATYPE] ...
-# where DATATYPE = cidlog, cidinfo
-#
-# SET LINE FORMAT:
-# set ITEM = VALUE [ITEM = VALUE] ...
-# where ITEM = cidalias, cidlog, datalog, initcid, initstr,
-# lockfile, port, ttyclocal, ttyport, ttyspeed,
-# nomodem
-
-############################
-# Log and Info for Clients #
-############################
-
-# Send the call log to a client when connected
-# The default is not to send the call log file
-send cidlog
-
-# Send call info (LINE and RING) to a client at each ring
-# The default is not to send the call info line
-send cidinfo
-
-############################
-# NCID Communications Port #
-############################
-
-# The default TCP/IP port is 3333
- set port = 3333
-
-#######################
-# Alias and Log Files #
-#######################
-
-# The default CID alias file: /etc/ncid/ncidd.alias
-# set cidalias = /etc/ncid/ncidd.alias
-
-# The default CID call log file: /var/log/cidcall.log
-# the log file must exist, ncidd will not create it
-# (also make the change in /etc/logrotate.d/ncidd
-# and also /etc/ncid/ncidrotate.conf)
-# set cidlog = /var/log/cidcall.log
-
-# The default tty data log file: /var/log/ciddata.log
-# the log file must exist, ncidd will not create it
-# (also make the change in /etc/logrotate.d/ncidd
-# and also /etc/ncid/ncidrotate.conf)
-# set datalog = /var/log/ciddata.log
-
-#####################
-# TTY Configuration #
-#####################
-
-# The default tty port: /dev/modem
-# set ttyport = /dev/cu.modem # Macintosh OS X
- set ttyport = /dev/ttyS1
-
-# The default tty port speed: 19200
-# The tty speed can be one of: 38400, 19200, 9600, 4800
-# set ttyspeed = 4800 # NetCallerID port speed
-
-# Ignore tty control signals for internal modems and 3 wire serial cables
-# Disable tty control signals: ttyclocal = 1
-# Enable tty control signals: ttyclocal = 0 (default)
-# set ttyclocal = 1
-
-# The lockfile name is generated automatically
-# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem
-# set lockfile = /var/lock/LCK..ttyS0
-
-#####################
-# Modem or No Modem #
-#####################
-
-# Obtain CallerID from a CID device or a modem
-# device: nomodem = 1 (do not send AT commands)
-# modem: nomodem = 0 (default - send AT commands)
-# set nomodem = 1
-
-########################
-# Modem Initialization #
-########################
-
-# The default modem initialization is: "AT Z S0=0 E1 V1 Q0"
-# set initstr = "ATE1V1Q0"
-#
-# Alternate modem initialization string
-# set initstr = "AT&FE1V1Q0+VIP"
-
-# Addon strings to set modem for Distinctive Ring:
-# http://www.modemsite.com/56k/dring.asp
-#
-# 3Com/USR/TI chipset: ATS41=1
-# Reported Ring Codes: RING A, RING B, RING C
-# Rockwell/Conexant chipset: AT-SDR=7
-# Reported Ring Codes: RING 1, RING 2, RING 3
-# Lucent/Agere chipset: AT+VDR=1,0
-# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34
-#
-# Example adds 3Com DR to the default modem initialization
-# set initstr = "ATE1V1Q0S41=1"
-
-# The default for ncidd is to try two CID strings to setup
-# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1".
-# set initcid = "AT#CID=1"
-#
-# Alternate CID strings to try if default does not work:
-# set initcid = "AT+FCLASS=8;+VCID=1"
-# set initcid = "AT-STE=1;+VCID=1"
-# set initcid = "AT-STE=1;#CID=1"
-
-#################
-# TiVo Settings #
-#################
-# set ttyclocal = 1 # TiVo requires CLOCAL
-# set ttyport = /dev/ttyS1 # TiVo Modem Port
-# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port
-#
-# To use a modem on the TiVo serial port
-# Tivo (stereo mini jack) ->
-# -> (stereo mini plug) TiVo serial cable (9-pin male) ->
-# -> (9-pin Female) PC modem cable (25-pin Male ->
-# -> (25-pin Female) Modem
-# if the modem has switches, disable DTR
-# Use this string to set the modem before attaching it to the TiVo:
-# AT&F0&D0&B1&W
-#
-# set ttyport = /dev/ttyS3 # TiVo Serial Port
-#
-# End TiVo Settings
-
diff --git a/abs/core-testing/live-installer/templates/real_change_chan.sh b/abs/core-testing/live-installer/templates/real_change_chan.sh
deleted file mode 100755
index efeba88..0000000
--- a/abs/core-testing/live-installer/templates/real_change_chan.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-REMOTE_NAME=SA3250
-cmd="$1"
-
-case $cmd in
- [0-9]*)
- for digit in $(echo $1 | sed -e 's/./& /g'); do
- irsend SEND_ONCE $REMOTE_NAME $digit
- sleep 0.3
- # If things work OK with sleep 1, try this for faster channel changes:
- # sleep 0.3
- done
- ;;
-
- *)
- irsend SEND_ONCE $REMOTE_NAME $cmd
- ;;
- esac
- /usr/bin/fix_audio.sh &
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
deleted file mode 100644
index e7c1539..0000000
--- a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf
+++ /dev/null
@@ -1,357 +0,0 @@
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004
-#
-# contributed by
-#
-# brand: ATI Remote Wonder
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name wonder
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 147987
- toggle_bit 0
-
-
- begin codes
- A 0x0000000014C500F0
- B 0x0000000014C601F0
- POWER 0x0000000014C702F0
- TV 0x0000000014C803F0
- DVD 0x0000000014C904F0
- WEB 0x0000000014CA05F0
- GUIDE 0x0000000014CB06F0
- GRAB 0x0000000014CC07F0
- VOL_DOWN 0x0000000014CE09F0
- VOL_UP 0x0000000014CD08F0
- MUTE 0x0000000014CF0AF0
- CH_DOWN 0x0000000014D10CF0
- CH_UP 0x0000000014D00BF0
- A 0x0000000014C500F0
- B 0x0000000014C601F0
- 1 0x0000000014D20DF0
- 2 0x0000000014D30EF0
- 3 0x0000000014D40FF0
- 4 0x0000000014D510F0
- 5 0x0000000014D611F0
- 6 0x0000000014D712F0
- 7 0x0000000014D813F0
- 8 0x0000000014D914F0
- 9 0x0000000014DA15F0
- 0 0x0000000014DC17F0
- MENU 0x0000000014DB16F0
- CHECK 0x0000000014DD18F0
- C 0x0000000014DE19F0
- D 0x0000000014E01BF0
- UP 0x0000000014DF1AF0
- LEFT 0x0000000014E21DF0
- DOWN 0x0000000014E722F0
- RIGHT 0x0000000014E41FF0
- OK 0x0000000014E31EF0
- REPLAY 0x0000000014E11CF0
- FULLSCREEN 0x0000000014E520F0
- E 0x0000000014E621F0
- F 0x0000000014E823F0
- REWIND 0x0000000014E924F0
- FORWARD 0x0000000014EB26F0
- PLAY 0x0000000014EA25F0
- RECORD 0x0000000014EC27F0
- STOP 0x0000000014ED28F0
- PAUSE 0x0000000014EE29F0
- end codes
-
-end remote
-
-
-
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
-#
-# contributed by Steffen
-#
-# brand: ATI Sapphire Remote Bob II USB
-# model no. of remote control: 5000024400
-# devices being controlled by this remote: MythTV
-#
-
-begin remote
-
-name wonder II
-bits 16
-eps 30
-aeps 100
-
-one 0 0
-zero 0 0
-pre_data_bits 8
-pre_data 0x0
-post_data_bits 16
-post_data 0x0
-gap 299851
-toggle_bit 0
-
-
-begin codes
-aux1 0x023F
-aux2 0x023F
-aux3 0x023F
-aux4 0x023F
-mouse_left_btn 0x02A9
-mouse_right_btn 0x02AA
-a 0x0278
-b 0x0279
-power 0x020C
-dvd 0x0238
-tv 0x0239
-help 0x02BE
-pc 0x023F
-resize 0x02D5
-hand 0x02D0
-ati 0x028E
-vol_up 0x0210
-vol_down 0x0211
-mute 0x020D
-ch_up 0x0220
-ch_down 0x0221
-mouse_up 0x013F
-mouse_down 0x013F
-mouse_left 0x013F
-mouse_right 0x013F
-1 0x0201
-2 0x0202
-3 0x0203
-4 0x0204
-5 0x0205
-6 0x0206
-7 0x0207
-8 0x0208
-9 0x0209
-0 0x0200
-list 0x0254
-check 0x0282
-info 0x02F9
-timer 0x0296
-arrow_up 0x0258
-arrow_left 0x025A
-arrow_right 0x025B
-arrow_down 0x0259
-ok 0x025C
-c 0x017A
-d 0x027B
-play 0x022C
-e 0x027C
-f 0x027D
-rewind 0x0229
-rec 0x0237
-stop 0x0231
-pause 0x0230
-ffwd 0x0228
-end codes
-
-end remote
-
-
-# Please make this file available to others
-# by sending it to <lirc at bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004
-#
-# contributed by gLaNDix
-#
-# brand: ATI
-# model no. of remote control: 5000023600
-# devices being controlled by this remote: MythTV 0.14
-#
-# USB ID: 0bc7:0004
-#
-
-begin remote
-
- name REMOTE_WONDER
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 227933
- toggle_bit 0
-
-
- begin codes
- A 0x000000000000D500
- B 0x000000000000D601
- C 0x000000000000EE19
- D 0x000000000000F01B
- E 0x000000000000F621
- F 0x000000000000F823
- POWER 0x000000000000D702
- TV 0x000000000000D803
- DVD 0x000000000000D904
- WEB 0x000000000000DA05
- BOOK 0x000000000000DB06
- HAND 0x000000000000DC07
- MOUSE_LEFT_BTN 0x0000000000004D78
- MOUSE_LEFTBUTTONUP 0x0000000000004E79
- MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79
- MOUSE_RIGHT_BTN 0x000000000000517C
- MOUSE_RIGHTBUTTONUP 0x000000000000527D
- MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E
- MOUSE_LEFT 0x0000000000004570
- MOUSE_RIGHT 0x0000000000004671
- MOUSE_UP 0x0000000000004772
- MOUSE_DOWN 0x0000000000004873
- MOUSE_UPRIGHT 0x0000000000004A75
- MOUSE_DOWNRIGHT 0x0000000000004B76
- MOUSE_DOWNLEFT 0x0000000000004C77
- MOUSE_UPLEFT 0x0000000000004974
- VOL_UP 0x000000000000DD08
- VOL_DOWN 0x000000000000DE09
- MUTE 0x000000000000DF0A
- CH_DOWN 0x000000000000E10C
- CH_UP 0x000000000000E00B
- 1 0x000000000000E20D
- 2 0x000000000000E30E
- 3 0x000000000000E40F
- 4 0x000000000000E510
- 5 0x000000000000E611
- 6 0x000000000000E712
- 7 0x000000000000E813
- 8 0x000000000000E914
- 9 0x000000000000EA15
- 0 0x000000000000EC17
- DVD_ROOTMENU 0x000000000000EB16
- SETUP 0x000000000000ED18
- ARROW_UP 0x000000000000EF1A
- ARROW_RIGHT 0x000000000000F41F
- ARROW_DOWN 0x000000000000F722
- ARROW_LEFT 0x000000000000F21D
- OK 0x000000000000F31E
- MAXAMIZE 0x000000000000F520
- TV_ON_DEMAND 0x000000000000F11C
- BACK 0x000000000000F924
- PLAY 0x000000000000FA25
- NEXT 0x000000000000FB26
- RECORD 0x000000000000FC27
- STOP 0x000000000000FD28
- PAUSE 0x000000000000FE29
- end codes
-
-end remote
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
-#
-# contributed by Jason Piterak
-#
-# brand: ati
-# This uses the atiusb driver
-#=20
-# model no. of remote control: 5000022000
-#
-# devices being controlled by this remote:
-# MythTV PVR using knopmyth by Cecil and Dale at
-# http://mysettopbox.tv
-# Key map names are as per ATI's website:
-#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
-# Feel free to change them as you see fit :-)
-#
-# NOTE: There are 16 channels for this remote; this file only
-# supports one channel. See the GATOS project for information
-# on how to change the channel. Not tested. Unknown channel.
-#
-
-begin remote
-
- name atiusb
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0xF000
- gap 139891
- toggle_bit 0
-
-
- begin codes
- a 0x000000000000C500
- b 0x000000000000C601
- power 0x000000000000C702
- tv 0x000000000000C803
- dvd 0x000000000000C904
- web 0x000000000000CA05
- media_library 0x000000000000CB06
- drag 0x000000000000CC07
- mouse-button_left 0x0000000000003D78
- mouse-button_right 0x000000000000417C
- mouse-up 0x0000000000003772
- mouse-down 0x0000000000003873
- mouse-left 0x0000000000003570
- mouse-right 0x0000000000003671
- mouse-left_up 0x0000000000003974
- mouse-right_up 0x0000000000003A75
- mouse-left_down 0x0000000000003C77
- mouse-right_down 0x0000000000003B76
- vol-up 0x000000000000CD08
- vol-down 0x000000000000CE09
- mute 0x000000000000CF0A
- chan-up 0x000000000000D00B
- chan-down 0x000000000000D10C
- 1 0x000000000000D20D
- 2 0x000000000000D30E
- 3 0x000000000000D40F
- 4 0x000000000000D510
- 5 0x000000000000D611
- 6 0x000000000000D712
- 7 0x000000000000D813
- 8 0x000000000000D914
- 9 0x000000000000DA15
- 0 0x000000000000DC17
- dvd-root_menu 0x000000000000DB16
- launch_setup 0x000000000000DD18
- c 0x000000000000DE19
- d 0x000000000000E01B
- tv_on_demand 0x000000000000E11C
- max_window 0x000000000000E520
- cursor-up 0x000000000000DF1A
- cursor-down 0x000000000000E722
- cursor-left 0x000000000000E21D
- cursor-right 0x000000000000E41F
- ok 0x000000000000E31E
- e 0x000000000000E621
- f 0x000000000000E823
- rewind 0x000000000000E924
- play 0x000000000000EA25
- fast_forward 0x000000000000EB26
- record 0x000000000000EC27
- stop 0x000000000000ED28
- pause 0x000000000000EE29
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
deleted file mode 100644
index 80eec07..0000000
--- a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt
+++ /dev/null
@@ -1,922 +0,0 @@
-# ~/.mythtv/lircrc
-#
-# MythTV native LIRC config file for
-# the ATI-Wonder Remote
-# using lirc_atiusb driver
-#
-
-begin
-prog = mythtv
-button = a
-config = E
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = A
-config = E
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = b
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = B
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = B
-config = O
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = stop
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ffwd
-config = Right
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = FORWARD
-config = Right
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = rewind
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = REWIND
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = pause
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = play
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = P
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = mute
-config = |
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = MUTE
-config = |
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = vol_down
-config = F10
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-config = F10
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = vol_up
-config = F11
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-config = F11
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = f
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = F
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = e
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = E
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ch_up
-config = Up
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = CH_UP
-config = Up
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ch_down
-config = Down
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-config = Down
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = ok
-config = Enter
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = OK
-config = Enter
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = rec
-config = R
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = R
-repeat = 5
-end
-
-
-# ~/.mythtv/lircrc
-#
-# MythTV native LIRC config file for
-# the ATI-Wonder Remote
-# using lirc_atiusb driver
-#
-
-begin
-#Jumppoint for Program Guide created in Mythweb
- prog = mythtv
- button = TV
- config = !
-end
-
-begin
-#Jumppoint for DVD playback created in Mythweb
- prog = mythtv
- button = DVD
- config = @
-end
-
-begin
- prog = mythtv
-#Jumppoint for MythWeater created in Mythweb
- button = WEB
- config = #
-end
-
-begin
- prog = mythtv
-#Jumppoint for MythVideo created in Mythweb
- button = BOOK
- config = $
-end
-
-begin
- prog = mythtv
-#Jumppoint for MythWeater created in Mythweb
- button = HAND
- config = %
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
- prog = mythtv
- button = MOUSE_UP
- config = Up
-end
-
-begin
- prog = mythtv
- button = MOUSE_DOWN
- config = Down
-end
-
-begin
- prog = mythtv
- button = MOUSE_LEFT
- config = Left
-end
-
-begin
- prog = mythtv
- button = MOUSE_RIGHT
- config = Right
-end
-
-begin
- prog = mythtv
- button = MOUSE_RIGHT_BTN
- config = Esc
-end
-
-begin
- prog = mythtv
-# Enter button
- button = MOUSE_LEFT_BTN
- config = Return
-end
-
-begin
- prog = mythtv
- button = POWER
- config = Esc
-end
-
-begin
- prog = mythtv
-# Enter button
- button = OK
- config = Return
-end
-
-begin
- prog = mythtv
- button = ARROW_UP
- config = Up
-end
-
-begin
- prog = mythtv
- button = ARROW_DOWN
- config = Down
-end
-
-begin
- prog = mythtv
- button = ARROW_LEFT
- config = Left
-end
-
-begin
- prog = mythtv
- button = ARROW_RIGHT
- config = Right
-end
-
-begin
- prog = mythtv
- button = D
- config = Esc
-end
-
-begin
-prog = mythtv
-button = CH_UP
-config = Up
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-config = Down
-end
-
-begin
- prog = mythtv
- button = VOL_DOWN
- repeat = 3
- config = F10
-end
-
-begin
- prog = mythtv
- button = VOL_UP
- repeat = 3
- config = F11
-end
-
-begin
- prog = mythtv
- button = MUTE
- config = |
-end
-
-begin
- prog = mythtv
- button = DVD_ROOTMENU
- config = M
-end
-
-begin
- prog = mythtv
-# Enter button
- button = SETUP
- config = Return
-end
-
-
-begin
- prog = mythtv
- button = A
- config = S
-end
-
-begin
- prog = mythtv
- button = B
- config = I
-end
-
-begin
- prog = mythtv
- button = C
- config = T
-end
-
-begin
-prog = mythtv
-# Change focus for PiP (to change channel in the other window)
-button = MAXAMIZE
-config = B
-end
-
-begin
-prog = mythtv
-# Toggle PiP on/off
-button = TV_ON_DEMAND
-config = V
-end
-
-begin
- prog = mythtv
- button = BACK
- config = <
-end
-
-begin
- prog = mythtv
- button = NEXT
- config = >
-end
-
-begin
- prog = mythtv
- button = BACK
- config = Left
-end
-
-
-begin
- prog = mythtv
- button = NEXT
- config = Right
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = R
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = P
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = P
-end
-
-#Page Up/Down
-begin
-prog = mythtv
-button = E
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = F
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = E
-# Use for backwards commercial skip
-config = Q
-end
-
-begin
-prog = mythtv
-button = F
-# Use for forward commercial skip
-config = Z
-end
-
-#Mplayer
-
-begin
-prog = mplayer
-button = PLAY
-config = pause
-end
-
-begin
-prog = mplayer
-button = PAUSE
-config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = D
-config = quit
-end
-
-begin
-prog = mplayer
-button = MOUSE_RIGHT_BTN
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = E
-repeat = 6
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = F
-repeat = 6
-config = seek 10
-end
-
-begin
-prog = mplayer
-button = BACK
-repeat = 6
-config = seek -70
-end
-
-begin
-prog = mplayer
-button = NEXT
-repeat = 6
-config = seek 70
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 6
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 6
-config = volume 1
-end
-
-#Xine
-
-begin
-prog = xine
-button = PLAY
-config = Play
-end
-
-begin
-prog = xine
-button = PAUSE
-config = PAUSE
-end
-
-begin
-prog = xine
-button = Mute
-config = Mute
-end
-
-begin
-prog = xine
-button = STOP
-config = Stop
-end
-
-begin
-prog = xine
-button = POWER
-config = Quit
-end
-
-begin
-prog = xine
-button = D
-config = quit
-end
-
-begin
-prog = xine
-button = MOUSE_RIGHT_BTN
-config = quit
-end
-
-begin
-prog = xine
-button = ARROW_UP
-repeat = 4
-config = EventUp
-end
-
-begin
-prog = xine
-button = ARROW_DOWN
-repeat = 4
-config = EventDown
-end
-
-begin
-prog = xine
-button = ARROW_LEFT
-repeat = 4
-config = EventLeft
-end
-
-begin
-prog = xine
-button = ARROW_RIGHT
-repeat = 4
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 0
-config = EventSelect
-end
-
-begin
-prog = xine
-button = MOUSE_UP
-repeat = 4
-config = EventUp
-end
-
-begin
-prog = xine
-button = MOUSE_DOWN
-repeat = 4
-config = EventDown
-end
-
-begin
-prog = xine
-button = MOUSE_LEFT
-repeat = 4
-config = EventLeft
-end
-
-begin
-prog = xine
-button = MOUSE_RIGHT
-repeat = 4
-config = EventRight
-end
-
-begin
-prog = xine
-button = MOUSE_LEFT_BTN
-repeat = 0
-config = EventSelect
-end
-
-begin
-prog = xine
-button = DVD_ROOTMENU
-repeat = 0
-config = Menu
-end
-
-#vol down
-begin
-prog = xine
-button = VOL_DOWN
-repeat = 1
-config = Volume-
-end
-
-#vol up
-begin
-prog = xine
-button = VOL_UP
-repeat = 1
-config = Volume+
-end
-
-begin
-prog = xine
-button = TV_ON_DEMAND
-repeat = 1
-config = ZoomIn
-end
-
-begin
-prog = xine
-button = MAXAMIZE
-repeat = 1
-config = ZoomOut
-end
-
-#skip chapter forward
-begin
-prog = xine
-button = NEXT
-repeat = 1
-config = EventNext
-end
-
-#skip chapter backward
-begin
-prog = xine
-button = BACK
-repeat = 1
-config = EventPrior
-end
-
-begin
-prog = xine
-button = F
-repeat = 2
-config = SeekRelative+45
-end
-
-begin
-prog = xine
-button = E
-repeat = 2
-config = SeekRelative-45
-end
-
diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg
deleted file mode 100644
index 351a111..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
deleted file mode 100644
index b76d32c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand: Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
- name Streamzap_PC_Remote
- bits 6
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 889 889
- zero 889 889
- plead 889
- pre_data_bits 8
- pre_data 0xA3
- gap 108344
- toggle_bit 2
-
-
- begin codes
- 0 0x00
- 1 0x01
- 2 0x02
- 3 0x03
- 4 0x04
- 5 0x05
- 6 0x06
- 7 0x07
- 8 0x08
- 9 0x09
- POWER 0x0A
- MUTE 0x0B
- CH_UP 0x0C
- VOL_UP 0x0D
- CH_DOWN 0x0E
- VOL_DOWN 0x0F
- UP 0x10
- LEFT 0x11
- OK 0x12
- RIGHT 0x13
- DOWN 0x14
- MENU 0x15
- EXIT 0x16
- PLAY 0x17
- PAUSE 0x18
- STOP 0x19
- |<< 0x1A
- >>| 0x1B
- RECORD 0x1C
- << 0x1D
- >> 0x1E
- RED 0x20
- GREEN 0x21
- YELLOW 0x22
- BLUE 0x23
- end codes
-
-end remote
-
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005
-#
-# contributed by
-#
-# brand: RS_LD_120-MX500
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name RS_LD
- bits 15
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- one 384 1920
- zero 384 896
- ptrail 384
- gap 70400
- min_repeat 2
- toggle_bit 0
-
-
- begin codes
- RESET 0x19FD
- TIME 0X1902
- BLANK 0X1B02
- PICTURE 0X1882
- ASPECT 0X1A82
- BROWSE 0X1982
- DELETE 0X1B82
- CARD 0X1842
- CARD_SOURCE 0X1A42
- SPARE1 0X1942
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc
deleted file mode 100644
index 5e668b5..0000000
--- a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc
+++ /dev/null
@@ -1,832 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
- remote = RS_LD
- button = RESET
- prog = irexec
- repeat = 0
- config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
- remote = RS_LD
- button = TIME
- prog = irexec
- repeat = 10
- config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
- remote = RS_LD
- button = BLANK
- prog = irexec
- repeat = 0
-# config = ls
- config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 4
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-end
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = i
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
- prog = mplayer
- button = pause
- config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
- button = DELETE
- prog = xine
- repeat = 4
- config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
- button = PICTURE
- prog = xine
- repeat = 4
- config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button = >>
-repeat = 4
-#config = SeekRelative+30
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config = SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config = SeekRelative-1200
-end
-
-begin
-prog = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
- begin
- prog = xmms
- button = PLAY
- config = PLAY
- end
- begin
- prog = xmms
- button = clear
- config = PLAYLIST_CLEAR
- end
- begin
- prog = xmms
- button = load
- config = PLAYLIST_ADD .xmms/xmms.m3u
- end
- begin
- prog = xmms
- button = PAUSE
- config = PAUSE
- end
- begin
- prog = xmms
- button = STOP
- config = STOP
- end
- begin
- prog = xmms
- button = EXIT
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = POWER
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = CH_UP
- config = NEXT
- end
- begin
- prog = xmms
- button = CH_DOWN
- config = PREV
- end
-
-
-
-begin
- prog = xmms
- button = >>|
- config = NEXT
- end
-begin
- prog = xmms
- button = |<<
- config = PREV
-end
-
-
-begin
- prog = xmms
- button = <<
- config = FWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = <<
- config = BWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = volup
- config = VOL_UP 10
- repeat = 2
- end
- begin
- prog = xmms
- button = voldown
- config = VOL_DOWN 10
- repeat = 2
- end
- begin
- prog = xmms
- button = 1
- config = ONE
- end
- begin
- prog = xmms
- button = 2
- config = TWO
- end
- begin
- prog = xmms
- button = 3
- config = THREE
- end
- begin
- prog = xmms
- button = 4
- config = FOUR
- end
- begin
- prog = xmms
- button = 5
- config = FIVE
- end
- begin
- prog = xmms
- button = 6
- config = SIX
- end
- begin
- prog = xmms
- button = 7
- config = SEVEN
- end
- begin
- prog = xmms
- button = 8
- config = EIGHT
- end
- begin
- prog = xmms
- button = 9
- config = NINE
- end
- begin
- prog = xmms
- button = 0
- config = ZERO
- end
- begin
- prog = xmms
- button = enter
- config = SETPOS
- end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg
deleted file mode 100644
index 38857f9..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf
deleted file mode 100644
index b76d32c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand: Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
- name Streamzap_PC_Remote
- bits 6
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 889 889
- zero 889 889
- plead 889
- pre_data_bits 8
- pre_data 0xA3
- gap 108344
- toggle_bit 2
-
-
- begin codes
- 0 0x00
- 1 0x01
- 2 0x02
- 3 0x03
- 4 0x04
- 5 0x05
- 6 0x06
- 7 0x07
- 8 0x08
- 9 0x09
- POWER 0x0A
- MUTE 0x0B
- CH_UP 0x0C
- VOL_UP 0x0D
- CH_DOWN 0x0E
- VOL_DOWN 0x0F
- UP 0x10
- LEFT 0x11
- OK 0x12
- RIGHT 0x13
- DOWN 0x14
- MENU 0x15
- EXIT 0x16
- PLAY 0x17
- PAUSE 0x18
- STOP 0x19
- |<< 0x1A
- >>| 0x1B
- RECORD 0x1C
- << 0x1D
- >> 0x1E
- RED 0x20
- GREEN 0x21
- YELLOW 0x22
- BLUE 0x23
- end codes
-
-end remote
-
-
-
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005
-#
-# contributed by
-#
-# brand: RS_LD_120-MX500
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name RS_LD
- bits 15
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- one 384 1920
- zero 384 896
- ptrail 384
- gap 70400
- min_repeat 2
- toggle_bit 0
-
-
- begin codes
- RESET 0x19FD
- TIME 0X1902
- BLANK 0X1B02
- PICTURE 0X1882
- ASPECT 0X1A82
- BROWSE 0X1982
- DELETE 0X1B82
- CARD 0X1842
- CARD_SOURCE 0X1A42
- SPARE1 0X1942
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc
deleted file mode 100755
index 2663c63..0000000
--- a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc
+++ /dev/null
@@ -1,857 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
- remote = RS_LD
- button = RESET
- prog = irexec
- repeat = 0
- config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
- remote = RS_LD
- button = TIME
- prog = irexec
- repeat = 10
- config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
- remote = RS_LD
- button = BLANK
- prog = irexec
- repeat = 0
-# config = ls
- config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 5
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-repeat = 5
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-repeat = 5
-end
-
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-repeat = 5
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-repeat = 5
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-repeat = 5
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-repeat = 5
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-repeat = 5
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = S
-repeat = 5
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
- prog = mplayer
- button = pause
- config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
- button = DELETE
- prog = xine
- repeat = 4
- config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
- button = PICTURE
- prog = xine
- repeat = 4
- config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button = >>
-repeat = 4
-#config = SeekRelative+30
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config = SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config = SeekRelative-1200
-end
-
-begin
-prog = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
- begin
- prog = xmms
- button = PLAY
- config = PLAY
- end
- begin
- prog = xmms
- button = clear
- config = PLAYLIST_CLEAR
- end
- begin
- prog = xmms
- button = load
- config = PLAYLIST_ADD .xmms/xmms.m3u
- end
- begin
- prog = xmms
- button = PAUSE
- config = PAUSE
- end
- begin
- prog = xmms
- button = STOP
- config = STOP
- end
- begin
- prog = xmms
- button = EXIT
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = POWER
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = CH_UP
- config = NEXT
- end
- begin
- prog = xmms
- button = CH_DOWN
- config = PREV
- end
-
-
-
-begin
- prog = xmms
- button = >>|
- config = NEXT
- end
-begin
- prog = xmms
- button = |<<
- config = PREV
-end
-
-
-begin
- prog = xmms
- button = <<
- config = FWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = <<
- config = BWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = volup
- config = VOL_UP 10
- repeat = 2
- end
- begin
- prog = xmms
- button = voldown
- config = VOL_DOWN 10
- repeat = 2
- end
- begin
- prog = xmms
- button = 1
- config = ONE
- end
- begin
- prog = xmms
- button = 2
- config = TWO
- end
- begin
- prog = xmms
- button = 3
- config = THREE
- end
- begin
- prog = xmms
- button = 4
- config = FOUR
- end
- begin
- prog = xmms
- button = 5
- config = FIVE
- end
- begin
- prog = xmms
- button = 6
- config = SIX
- end
- begin
- prog = xmms
- button = 7
- config = SEVEN
- end
- begin
- prog = xmms
- button = 8
- config = EIGHT
- end
- begin
- prog = xmms
- button = 9
- config = NINE
- end
- begin
- prog = xmms
- button = 0
- config = ZERO
- end
- begin
- prog = xmms
- button = enter
- config = SETPOS
- end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg
deleted file mode 100644
index e2af610..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
deleted file mode 100644
index f8175f3..0000000
--- a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf
+++ /dev/null
@@ -1,87 +0,0 @@
-# this config file was generated
-# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004
-#
-# contributed by Jarod Wilson <jcw@wilsonet.com>
-#------------------------------------------------------------------------------
-#
-# filename: RadioShack_15-2116-vcr0081.lirc
-# encoding: RC-5
-# brand: RadioShack Universal (and others)
-# model: 15-2116, set as VCR type 0081
-# supported devices: all
-#
-# note: requires quite a bit of key reassignment w/keymover and EFCs...
-# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO
-#
-#------------------------------------------------------------------------------
-
-begin remote
-
- name rs15-2116-vcr0081
- bits 11
- flags RC5|CONST_LENGTH
- eps 20
- aeps 0
- header 0 0
- one 889 889
- zero 889 889
- plead 889
- ptrail 0
- foot 0 0
- repeat 0 0
- pre_data_bits 2
- pre_data 0x02
- post_data_bits 0
- post_data 0x0
- pre 0 0
- post 0 0
- gap 113792
- toggle_bit 2
- frequency 36000
- duty_cycle 50
-
- begin codes
- 0 0x0000000000000140
- 1 0x0000000000000141
- 2 0x0000000000000142
- 3 0x0000000000000143
- 4 0x0000000000000144
- 5 0x0000000000000145
- 6 0x0000000000000146
- 7 0x0000000000000147
- 8 0x0000000000000148
- 9 0x0000000000000149
- INFO 0x000000000000014a
- SELECT 0x000000000000014b
- POWER 0x000000000000014c
- MUTE 0x000000000000014d
- MOVE 0x000000000000014e
- VOL+ 0x0000000000000150
- VOL- 0x0000000000000151
- RIGHT 0x000000000000015a
- LEFT 0x000000000000015b
- ENTER 0x000000000000015c
- MENU 0x000000000000015d
- CH+ 0x0000000000000160
- CH- 0x0000000000000161
- PIP 0x0000000000000162
- SWAP 0x0000000000000163
- SLEEP 0x0000000000000166
- FREEZE 0x0000000000000168
- PAUSE 0x0000000000000169
- SKIP 0x000000000000016a
- EXIT 0x0000000000000171
- REW 0x0000000000000172
- REPLAY 0x0000000000000173
- FFWD 0x0000000000000174
- PLAY 0x0000000000000175
- STOP 0x0000000000000176
- REC 0x0000000000000177
- SKIP 0x0000000000000178
- +100 0x0000000000000179
- LAST 0x000000000000017b
- GUIDE 0x000000000000017c
- TV/VIDEO 0x000000000000017e
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
deleted file mode 100644
index 91c0de5..0000000
--- a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs
+++ /dev/null
@@ -1,539 +0,0 @@
-# ~/.mythtv/lircrc
-#
-# MythTV native LIRC config file for
-# the RadioShack 15-2116, VCR type 0081
-# using Hauppauge IR receiver
-#
-# By Jarod Wilson, 2003/12/31
-# Amalgamated from Harry O's
-# .lircrc, the mythtv.org docs, and
-# a few touches of my own. :)
-#
-
-# Channel Up
-begin
-prog = mythtv
-button = CH+
-repeat = 4
-config = Up
-end
-
-# Channel Down
-begin
-prog = mythtv
-button = CH-
-repeat = 4
-config = Down
-end
-
-# OK/Select
-begin
-prog = mythtv
-button = SELECT
-repeat = 4
-config = Return
-end
-
-# Play
-begin
-prog = mythtv
-button = PLAY
-repeat = 4
-config = Space
-end
-
-# Stop
-begin
-prog = mythtv
-button = STOP
-repeat = 4
-config = Esc
-end
-
-# Escape/Exit/Back
-begin
-prog = mythtv
-button = EXIT
-repeat = 4
-config = Esc
-end
-
-# Power Off/Exit
-begin
-prog = mythtv
-button = POWER
-repeat = 4
-config = Esc
-end
-
-# Pause
-begin
-prog = mythtv
-button = PAUSE
-repeat = 4
-config = P
-end
-
-# Mute
-begin
-prog = mythtv
-button = MUTE
-repeat = 4
-config = |
-end
-
-# Rewind (10 sec default)
-begin
-prog = mythtv
-button = REW
-repeat = 4
-config = Left
-end
-
-begin
-prog = mythtv
-button = LEFT
-repeat = 4
-config = Left
-end
-
-# Fast forward (30 sec default)
-begin
-prog = mythtv
-button = FFWD
-repeat = 4
-config = Right
-end
-
-begin
-prog = mythtv
-button = RIGHT
-repeat = 4
-config = Right
-end
-
-# Skip forward (10 min default)
-begin
-prog = mythtv
-button = FREEZE
-repeat = 4
-config = PgDown
-end
-
-# Skip backward (10 min default)
-begin
-prog = mythtv
-button = MOVE
-repeat = 4
-config = PgUp
-end
-
-# Record
-begin
-prog = mythtv
-button = REC
-repeat = 4
-config = R
-end
-
-# OSD browse
-begin
-prog = mythtv
-button = GUIDE
-repeat = 4
-config = O
-end
-
-# Display EPG while in live TV,
-# View selected show while in EPG
-begin
-prog = mythtv
-button = MENU
-repeat = 4
-config = M
-end
-
-# Bring up OSD info
-begin
-prog = mythtv
-button = INFO
-repeat = 4
-config = I
-end
-
-# Change display aspect ratio
-begin
-prog = mythtv
-button = +100
-repeat = 4
-config = W
-end
-
-# Seek to previous commercial cut point
-begin
-prog = mythtv
-button = SLEEP
-repeat = 4
-config = Q
-end
-
-# Seek to next commercial cut point
-begin
-prog = mythtv
-button = ENTER
-repeat = 4
-config = Z
-end
-
-# Change TV card input
-begin
-prog = mythtv
-button = TV/VIDEO
-repeat = 4
-config = C
-end
-
-# Toggle Picture-In-Picture
-begin
-prog = mythtv
-button = PIP
-repeat = 4
-config = V
-end
-
-# Swap PIP
-begin
-prog = mythtv
-button = SWAP
-repeat = 4
-config = N
-end
-
-# Cycle through channel history
-begin
-prog = mythtv
-button = LAST
-repeat = 4
-config = H
-end
-
-# Numbers 0-9
-
-begin
-prog = mythtv
-button = 0
-repeat = 4
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-repeat = 4
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-repeat = 4
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-repeat = 4
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-repeat = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-repeat = 4
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-repeat = 4
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-repeat = 4
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-repeat = 4
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-repeat = 4
-config = 9
-end
-
-### MPlayer commands
-
-begin
-prog = mplayer
-button = MENU
-repeat = 4
-config = osd
-end
-
-begin
-prog = mplayer
-button = PAUSE
-repeat = 4
-config = pause
-end
-
-begin
-prog = mplayer
-button = PLAY
-repeat = 4
-config = seek +1
-end
-
-begin
-prog = mplayer
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = mplayer
-button = REW
-repeat = 4
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = LEFT
-repeat = 4
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = FFWD
-repeat = 4
-config = seek +30
-end
-
-begin
-prog = mplayer
-button = RIGHT
-repeat = 4
-config = seek +30
-end
-
-begin
-prog = mplayer
-button = EXIT
-repeat = 4
-config = quit
-end
-
-begin
-prog = mplayer
-button = FREEZE
-repeat = 4
-config = seek +1200
-end
-
-begin
-prog = mplayer
-button = MOVE
-repeat = 4
-config = seek -1200
-end
-
-begin
-prog = mplayer
-button = +100
-repeat = 4
-config = vo_fullscreen
-end
-
-### Xine commands
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = CH+
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = CH-
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = LEFT
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = RIGHT
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = SELECT
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = GUIDE
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = FFWD
-repeat = 3
-config = SeekRelative+30
-end
-
-begin
-prog = xine
-button = REW
-repeat = 3
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button = VOL+
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VOL-
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = FREEZE
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = LAST
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = INFO
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = ENTER
-repeat = 3
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = SLEEP
-repeat = 3
-config = SpeedSlower
-end
diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg
deleted file mode 100644
index d465839..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410
deleted file mode 100644
index 3f6c5f0..0000000
--- a/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005
-#
-# contributed by
-#
-# brand: Adaptec
-# model no. of remote control:
-# devices being controlled by this remote: AVC-2410 capture card
-#
-
-begin remote
-
- name AVC-2410
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 16
- pre_data 0x82F1
- gap 202922
- min_repeat 0
- toggle_bit 0
-
-
- begin codes
- Live 0x00000000000025DA
- Timeshift 0x00000000000017E8
- Scan 0x00000000000018e7
- Power 0x00000000000009f6
- 1 0x00000000000026D9
- 2 0x00000000000019E6
- 3 0x00000000000010EF
- 4 0x00000000000027D8
- 5 0x00000000000020DF
- 6 0x00000000000011EE
- 7 0x00000000000028D7
- 8 0x00000000000021DE
- 9 0x00000000000012ED
- 0 0x00000000000022DD
- Mute 0x00000000000013EC
- Full 0x00000000000029D6
- Play 0x00000000000030CF
- Stop 0x00000000000023DC
- Skip 0x00000000000024DB
- Replay 0x00000000000014EB
- Rewind 0x00000000000031CE
- Forward 0x00000000000015EA
- Ch+ 0x00000000000001FE
- Ch- 0x00000000000005FA
- Vol+ 0x00000000000004FB
- Vol- 0x00000000000002FD
- Enter 0x00000000000003FC
- OSD 0x00000000000032CD
- cc 0x00000000000016E9
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax
deleted file mode 100644
index 06a4102..0000000
--- a/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax
+++ /dev/null
@@ -1,199 +0,0 @@
-
-#
-# This is a space encoded remote control from AnimaX.
-# You need at least lirc-0.5.4 to use this config file
-#
-# contributed by Karsten Scheibler <karsten.scheibler@student.uni-halle.de>
-#
-# brand: AnimaX
-# model: Anir Remote Control
-# supported devices: This remote control comes with some TV Tuner cards from
-# Hauppauge.
-#
-
-begin remote
-
- name ANIMAX
- bits 16
- flags SPACE_ENC|REVERSE
- eps 20
- aeps 0
-
- header 4500 4500
- one 562 1682
- zero 562 562
- ptrail 562
- plead 0
- foot 0 0
- repeat 2500 2500
- pre_data_bits 8
- pre_data 0xF0
- post_data_bits 0
- post_data 0x0
- pre 0 0
- post 0 0
- gap 12937
- repeat_gap 102937
- repeat_bit 0
-
- begin codes
- CD_DOWN 0x000000000000DB24
- CD_UP 0x0000000000005BA4
- TV_DOWN 0x000000000000DC23
- TV_UP 0x0000000000005CA3
- PHONE_DOWN 0x000000000000DD22
- PHONE_UP 0x0000000000005DA2
- RADIO_DOWN 0x000000000000DE21
- RADIO_UP 0x0000000000005EA1
- VIDEO_DOWN 0x000000000000DF20
- VIDEO_UP 0x0000000000005FA0
- AUX1_DOWN 0x000000000000E01F
- AUX1_UP 0x000000000000609F
- MAIL_DOWN 0x000000000000E11E
- MAIL_UP 0x000000000000619E
- AUX2_DOWN 0x000000000000E21D
- AUX2_UP 0x000000000000629D
- POWER_DOWN 0x000000000000E31C
- POWER_UP 0x000000000000639C
- LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B
- LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B
- REWIND_DOWN 0x000000000000E51A
- REWIND_UP 0x000000000000659A
- PLAY_DOWN 0x000000000000E619
- PLAY_UP 0x0000000000006699
- FORWARD_DOWN 0x000000000000E718
- FORWARD_UP 0x0000000000006798
- SKIP_BACKWARD_DOWN 0x000000000000E817
- SKIP_BACKWARD 0x0000000000006897
- STOP_DOWN 0x000000000000E916
- STOP_UP 0x0000000000006996
- SKIP_FORWARD_DOWN 0x000000000000EA15
- SKIP_FORWARD_UP 0x0000000000006A95
- CHANNEL_UP_DOWN 0x000000000000EB14
- CHANNEL_UP_UP 0x0000000000006B94
- MENU_DOWN 0x000000000000EC13
- MENU_UP 0x0000000000006C93
- VOLUME_UP_DOWN 0x000000000000ED12
- VOLUME_UP_UP 0x0000000000006D92
- BLUE_BUTTON_DOWN 0x000000000000EE11
- BLUE_BUTTON_UP 0x0000000000006E91
- MUTE_DOWN 0x000000000000EF10
- MUTE_UP 0x0000000000006F90
- VOLUME_DOWN_DOWN 0x000000000000F00F
- VOLUME_DOWN_UP 0x000000000000708F
- RED_BUTTON_DOWN 0x000000000000F10E
- RED_BUTTON_UP 0x000000000000718E
- GREEN_BUTTON_DOWN 0x000000000000F20D
- GREEN_BUTTON_UP 0x000000000000728D
- CHANNEL_DOWN_DOWN 0x000000000000F30C
- CHANNEL_DOWN_UP 0x000000000000738C
- 1_DOWN 0x000000000000F40B
- 1_UP 0x000000000000748B
- 2_DOWN 0x000000000000F50A
- 2_UP 0x000000000000758A
- 3_DOWN 0x000000000000F609
- 3_UP 0x0000000000007689
- 4_DOWN 0x000000000000F708
- 4_UP 0x0000000000007788
- 5_DOWN 0x000000000000F807
- 5_UP 0x0000000000007887
- 6_DOWN 0x000000000000F906
- 6_UP 0x0000000000007986
- 7_DOWN 0x000000000000FA05
- 7_UP 0x0000000000007A85
- 8_DOWN 0x000000000000FB04
- 8_UP 0x0000000000007B84
- 9_DOWN 0x000000000000FC03
- 9_UP 0x0000000000007C83
- SLASH_DOWN 0x000000000000FD02
- SLASH_UP 0x0000000000007D82
- 0_DOWN 0x000000000000FE01
- 0_UP 0x0000000000007E81
- MINUS_DOWN 0x000000000000FF00
- MINUS_UP 0x0000000000007F80
- end codes
-
-end remote
-
-
-begin remote
-
- name ANIMAX_MOUSE_BUTTONS
- bits 16
- flags SPACE_ENC|REVERSE
- eps 20
- aeps 0
-
- header 4500 4500
- one 562 1682
- zero 562 562
- ptrail 562
- plead 0
- foot 0 0
- repeat 0 0
- pre_data_bits 8
- pre_data 0xF0
- post_data_bits 0
- post_data 0x0
- pre 0 0
- post 0 0
- gap 12937
- repeat_bit 0
-
- begin codes
- RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639
- RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9
- LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31
- LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1
- end codes
-
-end remote
-
-
-begin remote
-
- name ANIMAX_MOUSE_PAD
- bits 16
- flags SPACE_ENC|REVERSE
- eps 20
- aeps 0
-
- header 4500 4500
- one 562 1682
- zero 562 562
- ptrail 562
- plead 0
- foot 0 0
- repeat 2500 2500
- pre_data_bits 8
- pre_data 0xF0
- post_data_bits 0
- post_data 0x0
- pre 0 0
- post 0 0
- gap 12937
- repeat_gap 8437
- repeat_bit 0
-
- begin codes
- MOUSE_NNW 0x000000000000906F
- MOUSE_NW 0x000000000000D02F
- MOUSE_NWW 0x000000000000916E
- MOUSE_W 0x000000000000D12E
- MOUSE_SWW 0x000000000000926D
- MOUSE_SW 0x000000000000D22D
- MOUSE_SSW 0x000000000000936C
- MOUSE_S 0x000000000000D32C
- MOUSE_SSE 0x000000000000946B
- MOUSE_SE 0x000000000000D42B
- MOUSE_SEE 0x000000000000956A
- MOUSE_E 0x000000000000D52A
- MOUSE_NEE 0x0000000000009669
- MOUSE_NE 0x000000000000D629
- MOUSE_NNE 0x0000000000009768
- MOUSE_N 0x000000000000D728
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax
deleted file mode 100644
index 09a2341..0000000
--- a/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax
+++ /dev/null
@@ -1,71 +0,0 @@
-#
-# lircmd config file for the animax remote control
-#
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 1 3 2
-
-#ACTIVATE * MENU
-
-
-
-MOVE_N ANIMAX_MOUSE_PAD MOUSE_N
-MOVE_N ANIMAX_MOUSE_PAD MOUSE_N
-
-MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE
-MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE
-
-MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE
-MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE
-
-MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE
-MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE
-
-MOVE_E ANIMAX_MOUSE_PAD MOUSE_E
-MOVE_E ANIMAX_MOUSE_PAD MOUSE_E
-
-MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE
-MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE
-
-MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE
-MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE
-
-MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE
-MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE
-
-MOVE_S ANIMAX_MOUSE_PAD MOUSE_S
-MOVE_S ANIMAX_MOUSE_PAD MOUSE_S
-
-MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW
-MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW
-
-MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW
-MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW
-
-MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW
-MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW
-
-MOVE_W ANIMAX_MOUSE_PAD MOUSE_W
-MOVE_W ANIMAX_MOUSE_PAD MOUSE_W
-
-MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW
-MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW
-
-MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW
-MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW
-
-MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW
-MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW
-
-
-
-BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN
-
-BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN
-BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN
-
-BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP
-BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg b/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus
deleted file mode 100644
index ceadbf0..0000000
--- a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# contributed by Tibor Sipos <tibors@moravia-it.com> and
-# Stefan Jahn <stefan@lkcc.org>
-#
-# brand: Asus
-# model: Asus TV-Box Remote Control
-#
-
-begin remote
-
- name Asus TV-Box IR
-
- bits 8
- eps 30
- aeps 100
- one 0 0
- zero 0 0
- gap 1399999
- toggle_bit 0
-
- begin codes
- 0 0x0000000000000000
- 1 0x0000000000000008
- 2 0x0000000000000010
- 3 0x0000000000000018
- 4 0x0000000000000020
- 5 0x0000000000000028
- 6 0x0000000000000030
- 7 0x0000000000000038
- 8 0x0000000000000040
- 9 0x0000000000000048
- PREV 0x0000000000000050
- ENTER 0x0000000000000058
- CH+ 0x0000000000000060
- CH- 0x0000000000000068
- VOL+ 0x0000000000000070
- VOL- 0x0000000000000078
- MAXIMIZE 0x0000000000000080
- MUTE 0x0000000000000088
- POWER 0x0000000000000090
- MENU 0x0000000000000098
- UP 0x00000000000000A0
- DOWN 0x00000000000000A8
- LEFT 0x00000000000000B0
- RIGHT 0x00000000000000B8
- CAPTION 0x00000000000000C0
- MTS/SAP 0x00000000000000C8
- DISPLAY 0x00000000000000D0
- SCAN 0x00000000000000D8
- RED 0x00000000000000E0
- GREEN 0x00000000000000E8
- YELLOW 0x00000000000000F0
- BLUE 0x00000000000000F8
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix
deleted file mode 100644
index a6e9abd..0000000
--- a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix
+++ /dev/null
@@ -1,152 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004
-#
-# contributed by
-#
-# brand: ASUS
-# model no. of remote control: DigiMatrix
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name ASUS_DigiMatrix
- bits 16
- flags SPACE_ENC
- eps 30
- aeps 100
-
- header 8057 4071
- one 479 1534
- zero 479 531
- ptrail 491
- pre_data_bits 8
- pre_data 0x35
- gap 25647
- toggle_bit 0
-
-
- begin codes
- up 0x000000000000E817
- down 0x00000000000018E7
- enter 0x000000000000D02F
- left 0x0000000000009867
- right 0x00000000000058A7
- 1 0x00000000000000FF
- 2 0x000000000000807F
- 3 0x00000000000040BF
- 4 0x000000000000C03F
- 5 0x00000000000020DF
- 6 0x000000000000A05F
- 7 0x000000000000609F
- 8 0x000000000000E01F
- 9 0x00000000000010EF
- 0 0x000000000000906F
- on_off 0x000000000000B04F
- dvd_vcd 0x000000000000F00F
- tv 0x00000000000008F7
- os_start 0x00000000000030CF
- photo 0x00000000000048B7
- home 0x00000000000044BB
- back 0x000000000000A857
- ch+ 0x000000000000B847
- stop 0x000000000000946B
- play 0x000000000000C43B
- vol+ 0x000000000000F807
- ch- 0x0000000000007887
- step- 0x000000000000E41B
- step+ 0x000000000000649B
- vol- 0x00000000000004FB
- pause 0x00000000000024DB
- pre 0x00000000000014EB
- next 0x000000000000A45B
- mute 0x000000000000847B
- rec 0x000000000000D42B
- subtitle 0x000000000000C837
- menu 0x00000000000038C7
- dvd_audio 0x00000000000050AF
- ui_size 0x0000000000008877
- ui_on_off 0x00000000000028D7
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005
-#
-# contributed by
-#
-# brand: ASUS
-# model no. of remote control: DigiMatrix Mark 2
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name ASUS_DigiMatrixMk2
- bits 8
- flags SPACE_ENC
- eps 30
- aeps 100
-
- header 2666 1378
- one 260 741
- zero 260 279
- ptrail 251
- pre_data_bits 1
- pre_data 0x0
- post_data_bits 8
- post_data 0x3
- gap 10826
- min_repeat 1
- toggle_bit 0
-
-
- begin codes
- power 0x0000000000000084
- tv_dvr 0x0000000000000044
- fm 0x00000000000000C4
- os_start 0x0000000000000024
- music 0x00000000000000A4
- pictures 0x0000000000000064
- video 0x00000000000000E4
- dvd_menu 0x0000000000000014
- up 0x000000000000004C
- down 0x00000000000000E0
- left 0x0000000000000010
- right 0x0000000000000040
- back 0x00000000000000B4
- ok 0x0000000000000088
- back_fwd 0x0000000000000074
- rew 0x0000000000000094
- play_pause 0x0000000000000054
- fwd 0x00000000000000D4
- step- 0x0000000000000098
- stop 0x0000000000000048
- step+ 0x0000000000000090
- vol+ 0x0000000000000058
- vol- 0x00000000000000D8
- home 0x00000000000000C8
- ch+ 0x0000000000000050
- ch- 0x00000000000000D0
- mute 0x0000000000000038
- rec 0x0000000000000028
- pc 0x0000000000000030
- 1 0x00000000000000B8
- 2 0x00000000000000A8
- 3 0x00000000000000B0
- 4 0x0000000000000078
- 5 0x0000000000000068
- 6 0x0000000000000070
- 7 0x00000000000000F8
- 8 0x00000000000000E8
- 9 0x00000000000000F0
- 0 0x0000000000000018
- ui_size 0x0000000000000004
- repeat 0x0000000000000008
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb
deleted file mode 100644
index 4953bf2..0000000
--- a/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb
+++ /dev/null
@@ -1,1259 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004
-#
-# contributed by Paul Miller <pmiller9@users.sourceforge.net>
-#
-# brand: ATI Remote Wonder
-# model no. of remote control: 5000015900A
-# devices being controlled by this remote: ATI USB Receiver
-#
-# CHANNEL CODES
-# To change your channel, hold the hand button down until the
-# LED begins to blink. Then enter the channel number
-# (1 through 16) and press the hand again.
-#
-# NOTE!! The lirc_atiusb driver now removes the channel code
-# from key-codes (by default). This effectively outputs codes
-# for remote channel 1. You can change this behavior by
-# loading the module with unique=1. Type `modinfo lirc_atiusb`
-# for details.
-
-begin remote
-
- name ATIUSB_5000015900A
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 139944
- toggle_bit 0
-
-
- begin codes
- A 0x000000000000F500
- B 0x000000000000F601
- C 0x0000000000000E19
- D 0x000000000000101B
- E 0x0000000000001621
- F 0x0000000000001823
- TV 0x000000000000F803
- DVD 0x000000000000F904
- WEB 0x000000000000FA05
- BOOK 0x000000000000FB06
- HAND 0x000000000000FC07
- POWER 0x000000000000F702
- MOUSE_LEFT_BTN 0x0000000000006D78
- MOUSE_RIGHT_BTN 0x000000000000717C
- MOUSE_UP 0x0000000000006772
- MOUSE_DOWN 0x0000000000006B76
- MOUSE_LEFT 0x0000000000006C77
- MOUSE_RIGHT 0x0000000000006B76
- VOL_UP 0x000000000000FD08
- VOL_DOWN 0x000000000000FE09
- MUTE 0x000000000000FF0A
- CH_UP 0x000000000000000B
- CH_DOWN 0x000000000000010C
- 1 0x000000000000020D
- 2 0x000000000000030E
- 3 0x000000000000040F
- 4 0x0000000000000510
- 5 0x0000000000000611
- 6 0x0000000000000712
- 7 0x0000000000000813
- 8 0x0000000000000914
- 9 0x0000000000000A15
- 0 0x0000000000000C17
- LIST 0x0000000000000B16
- CHECK 0x0000000000000D18
- UP 0x0000000000000F1A
- DOWN 0x0000000000001722
- LEFT 0x000000000000121D
- RIGHT 0x000000000000141F
- OK 0x000000000000131E
- TIMER 0x000000000000111C
- MAX 0x0000000000001520
- REWIND 0x0000000000001924
- PLAY 0x0000000000001A25
- FFWD 0x0000000000001B26
- REC 0x0000000000001C27
- STOP 0x0000000000001D28
- PAUSE 0x0000000000001E29
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003
-#
-# contributed by Jason Piterak
-#
-# brand: ATI
-# model no. of remote control: 5000022000
-#
-# devices being controlled by this remote:
-# MythTV PVR using knopmyth by Cecil and Dale at
-# http://mysettopbox.tv
-# Key map names are as per ATI's website:
-# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html
-# Feel free to change them as you see fit :-)
-#
-# NOTE: There are 16 channels for this remote; this file only
-# supports one channel. See the GATOS project for information
-# on how to change the channel. Not tested. Unknown channel.
-#
-# also reported by Jeffrey Barnhill to work with model 5000023600 while
-# the dedicated section below did not work
-
-begin remote
-
- name ATIUSB_5000022000
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0000
- gap 139891
- toggle_bit 0
-
-
- begin codes
- a 0x000000000000C500
- b 0x000000000000C601
- power 0x000000000000C702
- tv 0x000000000000C803
- dvd 0x000000000000C904
- web 0x000000000000CA05
- media_library 0x000000000000CB06
- drag 0x000000000000CC07
- mouse-button_left 0x0000000000003D78
- mouse-button_right 0x000000000000417C
- mouse-up 0x0000000000003772
- mouse-down 0x0000000000003873
- mouse-left 0x0000000000003570
- mouse-right 0x0000000000003671
- mouse-left_up 0x0000000000003974
- mouse-right_up 0x0000000000003A75
- mouse-left_down 0x0000000000003C77
- mouse-right_down 0x0000000000003B76
- vol-up 0x000000000000CD08
- vol-down 0x000000000000CE09
- mute 0x000000000000CF0A
- chan-up 0x000000000000D00B
- chan-down 0x000000000000D10C
- 1 0x000000000000D20D
- 2 0x000000000000D30E
- 3 0x000000000000D40F
- 4 0x000000000000D510
- 5 0x000000000000D611
- 6 0x000000000000D712
- 7 0x000000000000D813
- 8 0x000000000000D914
- 9 0x000000000000DA15
- 0 0x000000000000DC17
- dvd-root_menu 0x000000000000DB16
- launch_setup 0x000000000000DD18
- c 0x000000000000DE19
- d 0x000000000000E01B
- tv_on_demand 0x000000000000E11C
- max_window 0x000000000000E520
- cursor-up 0x000000000000DF1A
- cursor-down 0x000000000000E722
- cursor-left 0x000000000000E21D
- cursor-right 0x000000000000E41F
- ok 0x000000000000E31E
- e 0x000000000000E621
- f 0x000000000000E823
- rewind 0x000000000000E924
- play 0x000000000000EA25
- fast_forward 0x000000000000EB26
- record 0x000000000000EC27
- stop 0x000000000000ED28
- pause 0x000000000000EE29
- end codes
-
-end remote
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004
-#
-# contributed by Jurgen Kramer
-#
-# brand: ATI
-# model no. of remote control: 5000023600
-# devices being controlled by this remote: MythTV 0.14
-#
-# USB ID: 0bc7:0004
-#
-
-begin remote
-
- name ATIUSB_5000023600
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 227972
- min_repeat 4
- toggle_bit 0
-
-
- begin codes
- 1 0x000000000000920D
- 2 0x000000000000930E
- 3 0x000000000000940F
- 4 0x0000000000009510
- 5 0x0000000000009611
- 6 0x0000000000009712
- 7 0x0000000000009813
- 8 0x0000000000009914
- 9 0x0000000000009A15
- a 0x0000000000008500
- b 0x0000000000008601
- power 0x0000000000008702
- tv 0x0000000000008803
- dvd 0x0000000000008904
- web 0x0000000000008A05
- media_library 0x0000000000008B06
- drag 0x0000000000008C07
- 0 0x0000000000009C17
- c 0x0000000000009E19
- d 0x000000000000A01B
- mute 0x0000000000008F0A
- tv_on_demand 0x000000000000A11C
- max_window 0x000000000000A520
- e 0x000000000000A621
- f 0x000000000000A823
- ok 0x000000000000A31E
- left 0x000000000000A21D
- right 0x000000000000A41F
- up 0x0000000000009F1A
- down 0x000000000000A722
- rewind 0x000000000000A924
- play 0x000000000000AA25
- forward 0x000000000000AB26
- record 0x000000000000AC27
- stop 0x000000000000AD28
- pause 0x000000000000AE29
- mouse_button_left 0x000000000000FD78
- mouse_button_right 0x000000000000017C
- vol-down 0x0000000000008E09
- vol-up 0x0000000000008D08
- chan-down 0x000000000000910C
- chan-up 0x000000000000900B
- mouse-up 0x000000000000F772
- mouse-down 0x000000000000F873
- mouse-left 0x000000000000F570
- mouse-right 0x000000000000F671
- mouse-left_up 0x000000000000F974
- mouse-left_down 0x000000000000FC77
- mouse-right_up 0x000000000000FA75
- mouse-right_down 0x000000000000FB76
- dvd-root_menu 0x0000000000009B16
- launch_setup 0x0000000000009D18
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005
-#
-# contributed by Rapha�l Doursenaud (rdoursenaud@free.fr)
-#
-# brand: Sapphire (ATI)
-# model no. of remote control: 5000023600
-# devices being controlled by this remote: xmms, tvtime
-#
-
-begin remote
-
- name SAPPHIRE_ATIUSB_5000023600
- bits 40
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 227990
- toggle_bit 0
-
-
- begin codes
- 1 0x00000014E20D0000
- 2 0x00000014E30E0000
- 3 0x00000014E40F0000
- 4 0x00000014E5100000
- 5 0x00000014E6110000
- 6 0x00000014E7120000
- 7 0x00000014E8130000
- 8 0x00000014E9140000
- 9 0x00000014EA150000
- a 0x00000014D5000000
- b 0x00000014D6010000
- power 0x00000014D7020000
- tv 0x00000014D8030000
- dvd 0x00000014D9040000
- web 0x00000014DA050000
- media_library 0x00000014DB060000
- drag 0x00000014DC070000
- 0 0x00000014EC170000
- c 0x00000014EE190000
- d 0x00000014F01B0000
- mute 0x00000014DF0A0000
- tv_on_demand 0x00000014F11C0000
- max_window 0x00000014F5200000
- e 0x00000014F6210000
- f 0x00000014F8230000
- ok 0x00000014F31E0000
- left 0x00000014F21D0000
- right 0x00000014F41F0000
- up 0x00000014EF1A0000
- down 0x00000014F7220000
- rewind 0x00000014F9240000
- play 0x00000014FA250000
- forward 0x00000014FB260000
- record 0x00000014FC270000
- stop 0x00000014FD280000
- pause 0x00000014FE290000
- mouse_button_left 0x000000144D780000
- mouse_button_right 0x00000014517C0000
- vol-down 0x00000014DE090000
- vol-up 0x00000014DD080000
- chan-down 0x00000014E10C0000
- chan-up 0x00000014E00B0000
- mouse-up 0x0000001447720000
- mouse-down 0x0000001448730000
- mouse-left 0x0000001445700000
- mouse-right 0x0000001446710000
- mouse-left_up 0x0000001449740000
- mouse-left_down 0x000000144C770000
- mouse-right_up 0x000000144A750000
- mouse-right_down 0x000000144B760000
- dvd-root_menu 0x00000014EB160000
- launch_setup 0x00000014ED180000
- end codes
-
-end remote
-
-
-# lircd.conf for X-10 Lola remote
-#
-# this config file was automatically generated
-# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004
-# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc
-#
-#
-# brand: X-10 Lola
-# model no. of remote control: UR89A
-# devices being controlled by this remote: mythtv
-#
-
-begin remote
-
- name X-10_Lola
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
-
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 219972
- toggle_bit 0
-
-
- begin codes
- up 0x000000000000600B
- down 0x000000000000610C
- left 0x0000000000005D08
- right 0x0000000000005E09
- M 0x0000000000005F0A
- 1 0x000000000000620D
- 2 0x000000000000630E
- 3 0x000000000000640F
- 4 0x0000000000006510
- 5 0x0000000000006611
- 6 0x0000000000006712
- 7 0x0000000000006813
- 8 0x0000000000006914
- 9 0x0000000000006A15
- 0 0x0000000000006C17
- a-d 0x0000000000006B16
- a-b 0x0000000000006D18
- pageup 0x000000000000711C
- pagedown 0x0000000000007520
- T 0x000000000000832E
- E 0x000000000000842F
- F 0x0000000000005C07
- S 0x0000000000008530
- scan- 0x000000000000802B
- rew 0x0000000000007924
- play 0x0000000000007A25
- ff 0x0000000000007B26
- scan+ 0x0000000000007F2A
- rec 0x0000000000007C27
- stop 0x0000000000007D28
- pause 0x0000000000007E29
- playlist 0x0000000000005601
- playing 0x000000000000822D
- enter 0x000000000000731E
- eu 0x0000000000006F1A
- ed 0x0000000000007722
- el 0x000000000000721D
- er 0x000000000000741F
- alb 0x0000000000006E19
- art 0x000000000000701B
- gen 0x0000000000007621
- trk 0x0000000000007823
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004
-#
-# contributed by Julien Damon
-#
-# brand: microapp6in1
-# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184
-# distributed in France
-# model no. of remote control: 4184(UR86E)
-# devices being controlled by this remote:
-
-#
-# sold by Pearl as Q-Sonic Master Remote 6in1 PC
-#
-
-begin remote
-
- name microapp6in1
- bits 40
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 203993
- toggle_bit 0
-
-
- begin codes
- num_1 0x00000020EE11820D
- num_2 0x00000020EE11420D
- num_3 0x00000020EE11C20D
- num_4 0x00000020EE11220D
- num_5 0x00000020EE11A20D
- num_6 0x00000020EE11620D
- num_7 0x00000020EE11E20D
- num_8 0x00000020EE11120D
- num_9 0x00000020EE11920D
- num_0 0x00000020EE11020D
- AV 0x00000020EE11BA05
- ok 0x00000020EE11520D
- up 0x00000020EE11D50A
- left 0x00000020EE11D20D
- right 0x00000020EE11D10E
- down 0x00000020EE11D30C
- exit 0x00000020EE11C906
- menu 0x00000020EE11B609
- mute 0x00000020EE11A00F
- vol+ 0x00000020EE11600F
- vol- 0x00000020EE11E00F
- ch+ 0x00000020EE11400F
- ch- 0x00000020EE11C00F
- hand 0x00000014307B0000
- skip_left 0x00000020EE113A05
- skip_right 0x00000020EE11D807
- play 0x00000020EE11B00F
- backward 0x00000020EE113807
- forward 0x00000020EE11B807
- pause 0x00000020EE11720D
- stop 0x00000020EE11FF00
- record 0x00000020EE11700F
- clic_left 0x000000142D780000
- clic_right 0x00000014317C0000
- mouse_up 0x0000001427720000
- mouse_down 0x0000001428730000
- mouse_right 0x0000001426710000
- mouse_left 0x0000001425700000
- mouse_up_right 0x000000142A750000
- mouse_down_right 0x000000142B760000
- mouse_up_left 0x0000001429740000
- mouse_down_left 0x000000142C770000
- power 0x00000020EE11F00F
-# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC
- leftbtn_up 0x000000142e790000
- rightbtn_up 0x00000014327d0000
- pc 0x00000020ee11d40b
-
- end codes
-
-end remote
-
-
-# this config file was automatically generated
-# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004
-#
-# contributed by Martin Tomasek <mtd@centrum.cz>
-#
-# brand: ATI Remote Wonder
-# model no. of remote control:
-# devices being controlled by this remote: ATI USB Receiver (X10).
-#
-# * remote is set to channel 1, driver reports channel 16. don't know
-# which is true.
-
-#
-# P: Vendor=0bc7 ProdID=0004 Rev= 1.00
-# S: Manufacturer=X10 Wireless Technology Inc
-# S: Product=USB Receiver
-#
-
-begin remote
-
- name atiusb_ch1
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 227933
- toggle_bit 0
-
-
- begin codes
- A 0x000000000000D500
- B 0x000000000000D601
- C 0x000000000000EE19
- D 0x000000000000F01B
- E 0x000000000000F621
- F 0x000000000000F823
- POWER 0x000000000000D702
- TV 0x000000000000D803
- DVD 0x000000000000D904
- WEB 0x000000000000DA05
- BOOK 0x000000000000DB06
- HAND 0x000000000000DC07
- MOUSE_LEFT_BTN 0x0000000000004D78
- MOUSE_RIGHT_BTN 0x000000000000517C
- MOUSE_LEFT 0x0000000000004570
- MOUSE_RIGHT 0x0000000000004671
- MOUSE_UP 0x0000000000004772
- MOUSE_DOWN 0x0000000000004873
- VOL_UP 0x000000000000DD08
- VOL_DOWN 0x000000000000DE09
- MUTE 0x000000000000DF0A
- CH_UP 0x000000000000E00B
- CH_DOWN 0x000000000000E10C
- 1 0x000000000000E20D
- 2 0x000000000000E30E
- 3 0x000000000000E40F
- 4 0x000000000000E510
- 5 0x000000000000E611
- 6 0x000000000000E712
- 7 0x000000000000E813
- 8 0x000000000000E914
- 9 0x000000000000EA15
- 0 0x000000000000EC17
- LIST 0x000000000000EB16
- CHECK 0x000000000000ED18
- UP 0x000000000000EF1A
- DOWN 0x000000000000F722
- LEFT 0x000000000000F21D
- RIGHT 0x000000000000F41F
- OK 0x000000000000F31E
- TIMER 0x000000000000F11C
- MAXIMIZE 0x000000000000F520
- REW 0x000000000000F924
- FFWD 0x000000000000FB26
- PLAY 0x000000000000FA25
- STOP 0x000000000000FD28
- RECORD 0x000000000000FC27
- PAUSE 0x000000000000FE29
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004
-#
-# contributed by Phil Speights
-#
-# brand: nvidia
-# model no. of remote control: UR88A
-# devices being controlled by this remote: nvidia personal cinema
-#
-
-begin remote
-
- name ATIUSB_UR88A
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 243948
- toggle_bit 0
-
-
- begin codes
- mouse-up 0x4A75
- mouse-right_up 0x4A75
- mouse-right 0x4671
- mouse-right_down 0x4B76
- mouse-down 0x4B76
- mouse-left_down 0x4873
- mouse-left 0x4C77
- mouse-left_up 0x4772
- esc 0xDF0A
- mouse-button_left 0x4D78
- mouse-button_right 0x517C
- 1 0xE20D
- 2 0xE30E
- 3 0xE40F
- 4 0xE510
- 5 0xE611
- 6 0xE712
- 7 0xE813
- 8 0xE914
- 9 0xEA15
- 0 0xEC17
- stop 0xFD28
- play 0xFA25
- fastfoward 0xFB26
- rewind 0xF924
- pause 0xFE29
- record 0xFC27
- previous 0xF621
- next 0xF823
- up 0xEF1A
- down 0xF722
- right 0xF41F
- left 0xF21D
- web 0xDC07
- music 0xDB06
- photo 0xDA05
- dvd/vcd 0xD904
- dvr 0xD803
- mute 0xD500
- playlist 0xD601
- chsurf 0xD702
- dvdmenu 0xEE19
- txt 0xEB16
- snapshots 0xED18
- setup 0xF01B
- audio 0xF11C
- slow 0xF520
- ok 0xF31E
- vol+ 0xDE09
- vol- 0xDD08
- chan- 0xE10C
- chan+ 0xE00B
- zoom 0xFF2A
- angle 0x002B
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005
-#
-# contributed by Dirk Aust
-#
-# brand: Medion, Made by X10, China
-# Remote P/N: 20016398
-# Receiver P/N: 20016397
-#
-# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC
-
-begin remote
-
- name Medion
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 139873
- toggle_bit 0
-
-
- begin codes
- TV 0x012C
- VCR 0x022D
- DVD 0xD904
- MUSIC 0xDB06
- RADIO 0x032E
- PHOTO 0xDA05
- TV_PREVIEW 0x042F
- CHANNEL_LIST 0x0530
- SETUP 0xF01B
- VIDEO_DESKTOP 0x0631
- CHAN+ 0xE00B
- VOL- 0xDD08
- MUTE 0xD500
- VOL+ 0xDE09
- CHAN- 0xE10C
- RED 0x0732
- GREEN 0x0833
- YELLOW 0x0934
- BLUE 0x0A35
- TXT 0xEB16
- 1 0xE20D
- 2 0xE30E
- 3 0xE40F
- 4 0xE510
- 5 0xE611
- 6 0xE712
- 7 0xE813
- 8 0xE914
- 9 0xEA15
- TV/RADIO 0xF11C
- 0 0xEC17
- DELETE 0xF520
- RENAME 0x0B36
- SNAPSHOT 0xED18
- UP 0xEF1A
- LEFT 0xF21D
- OK 0xF31E
- RIGHT 0xF41F
- DOWN 0xF722
- ACQ_IMAGE 0x0C37
- EDIT_IMAGE 0x0D38
- REW 0xF924
- PLAY 0xFA25
- FFW 0xFB26
- RECORD 0xFC27
- STOP 0xFD28
- PAUSE 0xFE29
- PREV 0xF621
- FULL 0x0E39
- NEXT 0xF823
- DVD_MENU 0xEE19
- DVD_AUDIO 0x0F3A
- POWER 0xD702
- end codes
-
-end remote
-
-
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005
-#
-# contributed by Steffen <starv-lirc@juniks.org>
-#
-# brand: ATI Sapphire Remote Bob II USB
-# model no. of remote control: 5000024400
-# devices being controlled by this remote: ASUS Digimatrix MythTV PVR
-#
-
-begin remote
-
- name 5000024400
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x0
- post_data_bits 16
- post_data 0x0
- gap 299851
- toggle_bit 0
-
-
- begin codes
- aux1 0x023F
- aux2 0x023F
- aux3 0x023F
- aux4 0x023F
- leftmouse 0x02A9
- rightmouse 0x02AA
- a 0x0278
- b 0x0279
- power 0x020C
- dvd 0x0238
- tv 0x0239
- help 0x02BE
- pc 0x023F
- resize 0x02D5
- hand 0x02D0
- ati 0x028E
- vol-up 0x0210
- vol-down 0x0211
- mute 0x020D
- chan-up 0x0220
- chan-down 0x0221
- mouse-up 0x013F
- mouse-down 0x013F
- mouse-left 0x013F
- mouse-right 0x013F
- 1 0x0201
- 2 0x0202
- 3 0x0203
- 4 0x0204
- 5 0x0205
- 6 0x0206
- 7 0x0207
- 8 0x0208
- 9 0x0209
- 0 0x0200
- list 0x0254
- check 0x0282
- info 0x02F9
- timer 0x0296
- up 0x0258
- left 0x025A
- right 0x025B
- down 0x0259
- ok 0x025C
- c 0x017A
- d 0x027B
- play 0x022C
- e 0x027C
- f 0x027D
- rewind 0x0229
- rec 0x0237
- stop 0x0231
- pause 0x0230
- ffwd 0x0228
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005
-#
-# contributed by
-#
-# brand: Niveus
-# model no. of remote control:
-# devices being controlled by this remote: Niveus X10
-#
-
-begin remote
-
- name Niveus_X10
- bits 40
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 203974
- toggle_bit 0
-
-
- begin codes
- power 0x00000020EE11F00F
- mouse-up 0x0000001447720000
- mouse-down 0x0000001448730000
- mouse-left 0x0000001445700000
- mouse-right 0x0000001446710000
- mouse-up-left 0x0000001449740000
- mouse-up-right 0x000000144A750000
- mouse-down-left 0x000000144C770000
- mouse-down-right 0x000000144B760000
- mouse-left-click 0x000000144D780000
- mouse-right-click 0x00000014517C0000
- mouse-drag 0x00000014507B0000
- vol- 0x00000020EE01E00F
- vol+ 0x00000020EE81600F
- ch- 0x00000020EEE1C00F
- ch+ 0x00000020EE61400F
- mute 0x00000020EEC1A00F
- 1 0x00000020EEA1820D
- 2 0x00000020EE61420D
- 3 0x00000020EEE1C20D
- 4 0x00000020EE41220D
- 5 0x00000020EEC1A20D
- 6 0x00000020EE81620D
- 7 0x00000020EE01E20D
- 8 0x00000020EE31120D
- 9 0x00000020EEB1920D
- ent 0x00000020EE71520D
- 0 0x00000020EE21020D
- a-b 0x00000020EED1BA05
- a 0x00000020EE513A05
- b 0x00000020EEF1D807
- c 0x00000020EEF1D609
- d 0x00000020EEF1D906
- menu 0x00000020EED1B609
- exit 0x00000020EEE1C906
- up 0x00000020EEF1D50A
- down 0x00000020EEF1D30C
- left 0x00000020EEF1D20D
- right 0x00000020EEF1D10E
- ok 0x00000020EE71520D
- rew 0x00000020EE513807
- play 0x00000020EED1B00F
- ff 0x00000020EED1B807
- rec 0x00000020EE11FF00
- stop 0x00000020EE91700F
- pause 0x00000020EE91720D
- end codes
-
-end remote
-#
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005
-#
-# contributed by
-#
-# brand: Medion
-# model no. of remote control: MD1 NBC remote
-# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb
-#
-
-begin remote
-
- name Medion_MD1
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 219994
- min_repeat 27
- toggle_bit 0
-
-
- begin codes
- Power 0x000000000000D702
- TV 0x000000000000012C
- Video 0x00000000000082AD
- CD/DVD 0x000000000000D904
- Teletext 0x0000000000006B96
- Audio 0x000000000000DB06
- Radio 0x00000000000083AE
- Page 0x0000000000000631
- Photo 0x0000000000005A85
- Info 0x000000000000042F
- Menu 0x0000000000006E99
- Back 0x000000000000F520
- Wheel_Up 0x000000000000CDF8
- Wheel_Down 0x000000000000C7F2
- Wheel_Left 0x000000000000F21D
- Wheel_Right 0x000000000000749F
- Wheel_Click 0x000000000000F31E
- Vol+ 0x000000000000DE09
- Vol- 0x0000000000005D88
- Mute 0x000000000000D500
- Program+ 0x000000000000608B
- Program- 0x000000000000E10C
- Prog_Switch 0x000000000000719C
- Select 0x000000000000F01B
- Red 0x00000000000087B2
- Green 0x0000000000000833
- Yellow 0x00000000000089B4
- Blue 0x0000000000000A35
- Stop 0x0000000000007DA8
- Pause 0x000000000000FE29
- Play 0x0000000000007AA5
- Skip_Left 0x000000000000F621
- Camera 0x0000000000006D98
- Skip_Right 0x000000000000F823
- Fast_Reverse 0x00000000000079A4
- Fast_Forward 0x000000000000FB26
- 1 0x000000000000628D
- 2 0x000000000000E30E
- 3 0x000000000000648F
- 4 0x000000000000E510
- 5 0x0000000000006691
- 6 0x000000000000E712
- 7 0x0000000000006893
- 8 0x000000000000E914
- 9 0x0000000000006A95
- 0 0x000000000000EC17
- Record 0x000000000000FC27
- end codes
-
-end remote
-
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005
-#
-# contributed by a_matteur
-#
-# brand: MEDION X10 RF
-# model no. of remote control: remote P/N:20014752, receiver P/N:20014751
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name MEDION_X10_RF
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x14
- post_data_bits 16
- post_data 0x0
- gap 235923
- toggle_bit 0
-
-
- begin codes
- tv 0x012C
- vcr 0x022D
- dvd 0x0904
- music 0x0B06
- radio 0x032E
- photo 0x0A05
- tvpreview 0x042F
- channellist 0x0530
- setup 0x001B
- videodesktop 0x0631
- ch+ 0x000B
- ch- 0x010C
- vol+ 0x0E09
- vol- 0x0D08
- mute 0x0500
- red 0x0732
- green 0x0833
- yellow 0x0934
- blue 0x0A35
- txt 0x0B16
- 0 0x0C17
- 1 0x020D
- 2 0x030E
- 3 0x040F
- 4 0x0510
- 5 0x0611
- 6 0x0712
- 7 0x0813
- 8 0x0914
- 9 0x0A15
- tvradio 0x011C
- delete 0x0520
- rename 0x0B36
- snapshot 0x0D18
- up 0x0F1A
- down 0x0722
- left 0x021D
- right 0x041F
- ok 0x031E
- acquireimage 0x0C37
- editimage 0x0D38
- play 0x0A25
- pause 0x0E29
- stop 0x0D28
- forward 0x0B26
- rewind 0x0924
- next 0x0823
- prev 0x0621
- record 0x0C27
- fullscreen 0x0E39
- dvdmenu 0x0E19
- dvdaudio 0x0F3A
- power 0x0702
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005
-#
-# contributed by: Peter J. Weyers <lirc(a)usr-local.de>
-#
-# brand: MEDION / ATI
-# model no. of remote control: 40005927
-# devices being controlled by this remote:
-#
-# This is an USB attached reciever wich works by radio, not by IR. It is
-# most probably a relabeled ATI X10 device and sold together with the
-# Medion Notebook MD41300. It works with the lirc_atiusb driver while the
-# ati_remote module is NOT(!) loaded
-
-begin remote
-
- name MEDION_40005927
- bits 40
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 227972
- toggle_bit 0
-
-
- begin codes
- TV_DVD 0x1481AC0000
- VIDEO 0x1482AD0000
- PHOTO 0x1459840000
- MUSIC 0x145B860000
- PC 0x1483AE0000
- MUTE 0x1455800000
- OK 0x14739E0000
- UP 0x146F9A0000
- DOWN 0x1477A20000
- LEFT 0x14729D0000
- RIGHT 0x14749F0000
- CH+ 0x145E890000
- CH- 0x145D880000
- VOL+ 0x14608B0000
- VOL- 0x14618C0000
- PLAY_PAUSE 0x147AA50000
- RECORD 0x147CA70000
- STOP 0x147DA80000
- FRWND 0x1479A40000
- FFWD 0x147BA60000
- PREV 0x1476A10000
- NEXT 0x1478A30000
- 1 0x14628D0000
- 2 0x14638E0000
- 3 0x14648F0000
- 4 0x1465900000
- 5 0x1466910000
- 6 0x1467920000
- 7 0x1468930000
- 8 0x1469940000
- 9 0x146A950000
- 0 0x146C970000
- RC 0x1484AF0000
- Screen_Symbol 0x146B960000
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006
-#
-# contributed by
-#
-# brand: Medion USB Remote Control X10
-# model no. of remote control: 40009936
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name Medion_X10
- bits 40
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 219969
- toggle_bit 0
-
-
- begin codes
- off 0x14D7020000
- tv 0x14012C0000
- video 0x1482AD0000
- dvd 0x14D9040000
- vt 0x146B960000
- audio 0x14DB060000
- radio 0x1483AE0000
- book 0x1406310000
- photo 0x145A850000
- info 0x14042F0000
- 0 0x146C970000
- 1 0x14E20D0000
- 2 0x14638E0000
- 3 0x14E40F0000
- 4 0x1465900000
- 5 0x14E6110000
- 6 0x1467920000
- 7 0x1468930000
- 8 0x14E9140000
- 9 0x146A950000
- ok 0x14F31E0000
- up 0x14CDF80000
- down 0x1446710000
- left 0x14F21D0000
- right 0x14749F0000
- menu 0x14EE190000
- back 0x1475A00000
- red 0x1407320000
- green 0x1488B30000
- yellow 0x1409340000
- blue 0x148AB50000
- mute 0x14D5000000
- ch+ 0x14608B0000
- ch- 0x14E10C0000
- vol+ 0x145E890000
- vol- 0x14DD080000
- switch 0x14719C0000
- stop 0x14FD280000
- pause 0x147EA90000
- play 0x14FA250000
- reward 0x1476A10000
- forward 0x14F8230000
- skipr 0x1479A40000
- skipf 0x14FB260000
- rec 0x147CA70000
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia
deleted file mode 100644
index 7091aa4..0000000
--- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# This is for the remote that Avermedia bundles with its TVCapture and
-# TVPhone, the classic ones (pre 98).
-# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes
-# lirc's job easy. You need at least lirc-0.6.3 to use this config file
-#
-# this config file was automatically generated
-# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001
-#
-# contributed by Santiago Garcia Mantinan <manty@i.am>
-#
-# brand: Avermedia
-# model: TVCapture & TVPhone, the classic ones (pre 98)
-# supported devices: This remote control comes with some TV Tuner cards from
-# Avermedia.
-
-begin remote
-
- name Avermedia
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 8984 4527
- one 568 1681
- zero 568 558
- ptrail 547
- repeat 8985 2276
- pre_data_bits 16
- pre_data 0x2FD
- gap 108069
- toggle_bit 0
-
-
- begin codes
- TV 0x0000000000006897
- FM 0x000000000000A857
- EXIT 0x00000000000048B7
- DISPLAY 0x00000000000030CF
- FREEZE 0x00000000000028D7
- CAPTURE 0x0000000000008877
- VIDEO 0x00000000000038C7
- 1 0x000000000000807F
- 2 0x00000000000040BF
- 3 0x000000000000C03F
- AUDIO 0x00000000000018E7
- 4 0x00000000000020DF
- 5 0x000000000000A05F
- 6 0x000000000000609F
- FULLSCREEN 0x000000000000F00F
- 7 0x000000000000E01F
- 8 0x00000000000010EF
- 9 0x000000000000906F
- LOOP 0x000000000000C837
- 0 0x00000000000050AF
- LEFTARROW 0x00000000000000FF
- RIGHTARROW 0x000000000000E817
- MUTE 0x00000000000008F7
- COLOR 0x000000000000B04F
- PREVIEW 0x000000000000708F
- CHANNELUP 0x000000000000D827
- VOL_UP 0x00000000000058A7
- AUTOSCAN 0x000000000000B847
- ENTER 0x0000000000009867
- CHANNELDOWN 0x000000000000F807
- VOL_DOWN 0x0000000000007887
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98
deleted file mode 100644
index f60ee50..0000000
--- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98
+++ /dev/null
@@ -1,175 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.5.5 on Thu May 25 18:00:24 2000
-#
-# contributed by Michal Kochanowicz & Jesus Bravo Alvarez
-#
-# brand: AVerMedia
-# model: ?
-# supported devices: some TVCapture98 (ID 0x00021461) and
-# some TVPhone98 (ID 0x00011461) cards
-
-begin remote
-
- name TVCapture98
- bits 6
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9078 4437
- one 615 1631
- zero 615 515
- ptrail 620
-# pre_data_bits 16
-# pre_data 0x40BF
- repeat 9080 2189
- gap 108056
- repeat_bit 0
-
- begin codes
- TV/FM 0x0000000000000023
- CD 0x0000000000000022
-# TELETEXT 0x000000000000C03F
- POWER 0x0000000000000027
-
- 1 0x0000000000000018
- 2 0x0000000000000010
- 3 0x0000000000000008
- VIDEO 0x0000000000000000
-
- 4 0x0000000000000019
- 5 0x0000000000000011
- 6 0x0000000000000009
- AUDIO 0x0000000000000001
-
- 7 0x000000000000001A
- 8 0x0000000000000012
- 9 0x000000000000000A
- FULLSCREEN 0x0000000000000002
-
- 0 0x000000000000001B
- DISPLAY 0x0000000000000013
- COLOR 0x000000000000000B
- LOOP 0x0000000000000003
-
- UNLABELED 0x000000000000001C
- LEFT 0x0000000000000014
- RIGHT 0x000000000000000C
- PREVIEW 0x0000000000000004
-
- AUTOSCAN 0x000000000000001D
- FREEZE 0x0000000000000015
- CAPTURE 0x000000000000000D
- MUTE 0x0000000000000005
-
- RED 0x000000000000001E
- VOL_DOWN 0x0000000000000016
- VOL_UP 0x000000000000000E
- YELLOW 0x0000000000000006
-
- GREEN 0x000000000000001F
- CH_DOWN 0x0000000000000017
- CH_UP 0x000000000000000F
- BLUE 0x0000000000000007
- end codes
-
-end remote
-
-#
-# this config file was automatically generated
-# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000
-#
-# contributed by Christoph Bartelmus <lirc@bartelmus.de>
-#
-# brand: AVerMedia
-# model: ? (36 buttons)
-# supported devices: TVPhone98 card (ID 0x00031461)
-# TVCapture98 card (ID 0x00041461)
-#
-# This config file does work with both homebrew receivers and
-# original AVerMedia TV cards !!!
-#
-
-begin remote
-
- name TVPhone98
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9078 4437
- one 615 1631
- zero 615 515
- ptrail 620
- repeat 9080 2189
- pre_data_bits 16
- pre_data 0x40BF
- gap 108056
- repeat_bit 0
-
- begin codes
- POWER 0x00000000000000FF
- TV/FM 0x000000000000807F
- CD 0x00000000000040BF
- TELETEXT 0x000000000000C03F
- VIDEO 0x00000000000020DF
- 1 0x000000000000A05F
- 2 0x000000000000609F
- 3 0x000000000000E01F
- AUDIO 0x00000000000010EF
- 4 0x000000000000906F
- 5 0x00000000000050AF
- 6 0x000000000000D02F
- FULLSCREEN 0x00000000000030CF
- 7 0x000000000000B04F
- 8 0x000000000000708F
- 9 0x000000000000F00F
-
- PREVIEW 0x00000000000008F7
- 0 0x0000000000008877
- DISPLAY 0x00000000000048B7
- LOOP 0x000000000000C837
- MUTE 0x00000000000028D7
- AUTOSCAN 0x000000000000A857
- FREEZE 0x0000000000006897
- CAPTURE 0x000000000000E817
- PLAY 0x00000000000018E7
- RECORD 0x0000000000009867
- PAUSE 0x00000000000058A7
- STOP 0x000000000000D827
- YELLOW 0x00000000000038C7
- RED 0x000000000000B847
- VOL_DOWN 0x0000000000007887
- VOL_UP 0x000000000000F807
- end codes
-
-end remote
-
-begin remote
-
- name TVPhone98_ext
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9078 4437
- one 615 1631
- zero 615 515
- ptrail 620
- repeat 9080 2189
- pre_data_bits 16
- pre_data 0xC03F
- gap 108056
- repeat_bit 0
-
- begin codes
- BLUE 0x00000000000000FF
- GREEN 0x000000000000807F
- CH_DOWN 0x00000000000040BF
- CH_UP 0x000000000000C03F
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate
deleted file mode 100644
index 36b1c6b..0000000
--- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# this config file was automatically generated
-# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002
-#
-# contributed by
-#
-# brand: AVerMedia
-# model:
-# supported devices: VDOMATE (ID 0x3001461)
-#
-
-begin remote
-
- name hanircd
- bits 32
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9086 4425
- one 625 1624
- zero 625 500
- ptrail 624
- repeat 9087 2185
- gap 107977
- toggle_bit 0
-
-
- begin codes
- power 0x0000000040BF00FF
- one 0x0000000040BFA05F
- two 0x0000000040BF609F
- three 0x0000000040BFE01F
- four 0x0000000040BF906F
- five 0x0000000040BF50AF
- six 0x0000000040BFD02F
- seven 0x0000000040BFB04F
- eight 0x0000000040BF708F
- nine 0x0000000040BFF00F
- zero 0x0000000040BF8877
- video 0x0000000040BF20DF
- fullscreen 0x0000000040BF30CF
- display 0x0000000040BF48B7
- color 0x0000000040BFC837
- loop 0x0000000040BF08F7
- coloup 0x0000000040BF6897
- colordn 0x0000000040BFE817
- preview 0x0000000040BF28D7
- autoscan 0x0000000040BF9867
- freeze 0x0000000040BF58A7
- capture 0x0000000040BFD827
- mute 0x0000000040BF18E7
- volumeup 0x0000000040BF7887
- volumedown 0x0000000040BFF807
- chnldown 0x00000000C03F40BF
- chnlup 0x00000000C03FC03F
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia
deleted file mode 100644
index e950862..0000000
--- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# lircmd config file
-#
-
-#PROTOCOL IntelliMouse
-PROTOCOL MouseSystems
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * FM
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-
-# These are lircmd-0.5.5 extensions
-MOVE_IN * VOLUP
-MOVE_OUT * VOLDOWN
-
-BUTTON1_CLICK * DISPLAY
-BUTTON2_CLICK * FREEZE
-BUTTON3_CLICK * CAPTURE
-
-BUTTON1_TOGGLE * AUDIO
-BUTTON2_TOGGLE * FULLSCREEN
-BUTTON3_TOGGLE * LOOP
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98
deleted file mode 100644
index 2885372..0000000
--- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# lircmd config file
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-# ACTIVATE * MENUE
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-
-# These are lircmd-0.5.5 extensions
-MOVE_IN * VOL_UP
-MOVE_OUT * VOL_DOWN
-
-BUTTON1_DOWN * 5
-BUTTON1_UP * 0
-
-BUTTON1_DOWN * TV/FM
-BUTTON2_DOWN * CD
-BUTTON3_DOWN * TELETEXT
-BUTTON1_CLICK * DISPLAY
-BUTTON3_CLICK * LOOP
-
-BUTTON1_TOGGLE * VIDEO
-BUTTON2_TOGGLE * AUDIO
-BUTTON3_TOGGLE * FULLSCREEN
diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg b/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy
deleted file mode 100644
index 1fd689f..0000000
--- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001
-#
-# contributed by Miguel Angel Alvarez <maacruz@navegalia.com>
-#
-# brand: BESTBUY
-# model: Easy TV (BT848)
-# supported devices:
-#
-
-begin remote
-
- name BESTBUY
- bits 5
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 3
- pre_data 0x0
-# gap 149990
- gap 199989
- toggle_bit 2
-
-
- begin codes
- 0 0x0000000000000000
- 1 0x0000000000000001
- 2 0x0000000000000002
- 3 0x0000000000000003
- 4 0x0000000000000004
- 5 0x0000000000000005
- 6 0x0000000000000006
- 7 0x0000000000000007
- 8 0x0000000000000008
- 9 0x0000000000000009
- TV 0x000000000000001C
- POWER 0x0000000000000012
- VIDEO 0x0000000000000011
- PREVIEW 0x000000000000000F
- MUTE 0x0000000000000013
- SCAN 0x0000000000000010
- CHANNEL_UP 0x000000000000001A
- CHANNEL_DOWN 0x000000000000001E
- VOL_UP 0x000000000000001B
- VOL_DOWN 0x000000000000001F
- LOOP 0x000000000000000A
- 100 0x0000000000000017
- ZOOM 0x000000000000000D
- RECORD 0x000000000000000E
- STOP 0x000000000000001D
- PLAY 0x0000000000000019
- FREEZE 0x0000000000000016
- COLOR 0x0000000000000014
- LEFT 0x0000000000000018
- RIGHT 0x000000000000000C
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2
deleted file mode 100644
index 77e87e3..0000000
--- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001
-#
-# contributed by Miguel Angel Alvarez <maacruz@navegalia.com>
-#
-# brand: BESTBUY
-# model: EASY TV (BT878)
-# supported devices:
-#
-
-begin remote
-
- name BESTBUY
- bits 7
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 1
- pre_data 0x0
- gap 199981
- toggle_bit 0
-
-
- begin codes
- TV/FM 0x0000000000000043
- SCAN 0x0000000000000047
- ZOOM 0x000000000000005C
- POWER 0x000000000000005E
- 1 0x0000000000000041
- 2 0x000000000000004B
- 3 0x000000000000005B
- VOL+ 0x000000000000005F
- 4 0x0000000000000045
- 5 0x0000000000000049
- 6 0x0000000000000055
- VOL- 0x0000000000000057
- 7 0x0000000000000046
- 8 0x000000000000004A
- 9 0x0000000000000052
- CH+ 0x0000000000000056
- 0 0x0000000000000042
- LOOP 0x0000000000000053
- +100 0x0000000000000050
- CH- 0x0000000000000054
- SOURCE 0x0000000000000040
- MUTE 0x0000000000000058
- - 0x0000000000000044
- FUNCTION 0x000000000000004E
- + 0x000000000000004C
- RESET 0x000000000000004D
- FREEZE 0x000000000000004F
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy
deleted file mode 100644
index e57d11f..0000000
--- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# lircmd config file
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * RESERVED
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_IN * CHANNEL_UP
-MOVE_OUT * CHANNEL_DOWN
-
-BUTTON1_TOGGLE * 5
-BUTTON1_TOGGLE * ZOOM
-BUTTON2_TOGGLE * RECORD
-BUTTON3_TOGGLE * STOP
-
-BUTTON1_CLICK * POWER
-BUTTON2_CLICK * TV
-BUTTON3_CLICK * SCAN
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2
deleted file mode 100644
index c515058..0000000
--- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# lircmd config file
-#
-
-#PROTOCOL IntelliMouse
-PROTOCOL MouseSystems
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * PLAY
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_IN * CH+
-MOVE_OUT * CH-
-
-BUTTON1_TOGGLE * 5
-BUTTON1_TOGGLE * FUNCTION
-BUTTON2_TOGGLE * -
-BUTTON3_TOGGLE * +
-
-BUTTON1_CLICK * TV/FM
-BUTTON2_CLICK * SCAN
-BUTTON3_CLICK * ZOOM
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca
deleted file mode 100644
index c1a0fa1..0000000
--- a/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#
-# contributed by Konrad Riedel <k.riedel@gmx.de>
-#
-# brand: CARACA
-# model: RC5 Remote Control
-#
-# supported devices:
-# CARACA nodes - see http://caraca.sourceforge.net
-# first byte: node address
-# 2nd byte: ir code
-#
-
-begin remote
-
- name Caraca
- bits 16
-
- begin codes
- POWER 0x3ff3
- 1 0x3ffe
- 2 0x3ffd
- 3 0x3ffc
- 4 0x3ffb
- 5 0x3ffa
- 6 0x3ff9
- 7 0x3ff8
- 8 0x3ff7
- 9 0x3ff6
- 0 0x3ff5
- PAUSE 0x3fcf
- EJECT 0x3fe2
- SEEK- 0x3fcd
- PLAY 0x3fca
- SEEK+ 0x3fcb
- RECORD 0x3fd2
- STOP 0x3fc9
- CH- 0x3fde
- CH+ 0x3fdf
- VOL- 0x3fee
- VOL+ 0x3fef
- MUTE 0x3ff2
- TV/FM 0x3fe3
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca
deleted file mode 100644
index 6baf5e4..0000000
--- a/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# This is an example of ~/.lircrc file
-# It is a copy of actual setup from my home machine.
-# Contributed by Konrad Riedel <k.riedel@gmx.de>
-#
-begin
- prog = irexec
- button = tv/fm
- config = xawtv -geometry +64+64 &
- mode = tv
- flags = once
-end
-
-begin tv
- begin
- prog = xawtv
- button = power
- config = quit
- flags = mode
- end
- begin
- prog = xawtv
- button = source
- repeat = 1
- config = setinput next
- end
- begin
- prog = xawtv
- button = zoom
- repeat = 1
- config = fullscreen
- end
- begin
- prog = xawtv
- button = ch-
- repeat = 1
- config = setstation prev
- end
- begin
- prog = xawtv
- button = ch+
- repeat = 1
- config = setstation next
- end
- begin
- prog = xawtv
- button = record
- repeat = 1
- #config = snap jpeg
- config = quit
- end
- begin
- prog = xawtv
- button = scan
- repeat = 1
- config = Key ctrl-z xawtv
- end
- begin
- prog = xawtv
- button = MUTE
- config = volume mute
- end
-end tv
-begin
- prog = irexec
- button = power
- config = xmms&
- mode = xmms
- flags = once
-end
-
-begin xmms
- begin
- prog = xmms
- button = play
- config = PLAY
- end
- begin
- prog = xmms
- button = pause
- config = PAUSE
- end
- begin
- prog = xmms
- button = stop
- config = STOP
- end
- begin
- prog = xmms
- button = vol-
- repeat = 1
- config = VOL_DOWN
- end
- begin
- prog = xmms
- button = vol+
- repeat = 1
- config = VOL_UP
- end
-
- begin
- prog = xmms
- button = power
- config = QUIT
- flags = mode
- end
- begin
- prog = xmms
- button = mute
- config = MUTE
- end
- begin
- prog = xmms
- button = seek+
- repeat = 1
- config = FWD
- end
- begin
- prog = xmms
- button = seek-
- repeat = 1
- config = BWD
- end
- begin
- prog = xmms
- button = ch+
- config = NEXT
- end
- begin
- prog = xmms
- button = ch-
- config = PREV
- end
-end xmms
diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg b/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos
deleted file mode 100644
index 764506c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos
+++ /dev/null
@@ -1,56 +0,0 @@
-
-#
-# This config file is for remote that comes with cheap TV Card made by
-# Chronos.
-#
-# contributed by T�nu Raitviir <jussuf@bumpclub.ee>
-#
-# brand: Chronos Video Shuttle II
-# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23)
-#
-
-begin remote
-
- name Chronos
- bits 5
- eps 30
- aeps 100
-
- gap 199766
- toggle_bit 0
-
- begin codes
- POWER 0x0000000000000000
- MOUSE_MODE 0x0000000000000010
- FULL_SCREEN 0x0000000000000008
- CH+ 0x0000000000000009
- CH- 0x0000000000000019
- 1 0x0000000000000018
- 2 0x0000000000000004
- 3 0x0000000000000014
- 4 0x000000000000001C
- 5 0x0000000000000002
- 6 0x0000000000000012
- 7 0x000000000000001A
- 8 0x0000000000000006
- 9 0x0000000000000016
- 0 0x000000000000001E
- VOL+ 0x0000000000000005
- VOL- 0x000000000000001D
- SOURCE 0x0000000000000003
- MUTE 0x000000000000001B
- AUDIO 0x0000000000000015
- VIDEO 0x0000000000000011
- CANCEL 0x000000000000001F
- ENTER 0x0000000000000001
- ESC 0x000000000000000B
- RECALL 0x000000000000000C
- AIR_CATV 0x000000000000000E
- INC 0x000000000000000A
- DEC 0x000000000000000D
- BOX 0x0000000000000017
- DOWN_ARROW 0x0000000000000013
- LEFT_ARROW_TERM 0x000000000000000F
- RIGHT_ARROW_TERM 0x0000000000000007
- end codes
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x
deleted file mode 100644
index 62f711e..0000000
--- a/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000
-#
-# contributed by Claas Langbehn <claas@bigfoot.com>
-# Please read the documentation, faq etc.
-# before sending me mails.
-#
-# brand: ASKEY
-# model: AS-218 / AS-220
-# supported devices: ASKEY MagicTV
-#
-# comment: repeated keys are recognized, now.
-#
-
-begin remote
-
- name AS-218
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9087 4424
- one 629 1617
- zero 629 495
- ptrail 632
- repeat 9088 2182
- pre_data_bits 16
- pre_data 0x61D6
- gap 107905
- repeat_bit 0
-
- begin codes
- 0 0x00000000000000FF
- 1 0x000000000000807F
- 2 0x00000000000040BF
- 3 0x000000000000C03F
- 4 0x00000000000020DF
- 5 0x000000000000A05F
- 6 0x000000000000609F
- 7 0x000000000000E01F
- 8 0x00000000000010EF
- 9 0x000000000000906F
- LOOP 0x00000000000050AF
-# unused
- FINE_UP(PLUS) 0x00000000000030CF
- ZOOM 0x000000000000B04F
- RECORD 0x000000000000708F
- PREVIEW 0x000000000000F00F
-
- SCAN 0x00000000000008F7
- VIDEO 0x0000000000008877
- POWER 0x00000000000048B7
- MUTE 0x000000000000C837
- COLOR 0x00000000000028D7
-#unused
- FREEZE 0x0000000000006897
- 100 0x000000000000E817
- FINE_DOWN(MINUS) 0x00000000000018E7
- PLAY 0x0000000000009867
- CH_UP 0x00000000000058A7
- VOL_UP 0x000000000000D827
- TV 0x00000000000038C7
- STOP 0x000000000000B847
- CH_DOWN 0x0000000000007887
- VOL_DOWN 0x000000000000F807
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb
deleted file mode 100644
index e84a68b..0000000
--- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# contributed by Clemens Ladisch <clemens|ladisch.de>
-#
-# brand: Creative
-# model: RM-1500
-# supported devices: Sound Blaster Extigy, SB Audigy 2 NX
-#
-# This is for the integrated IR receiver in Creative USB audio devices
-# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio
-# driver from ALSA 1.0.9 or later).
-#
-# This file should work with the exaudio driver, too.
-#
-
-begin remote
-
- name RM-1500
- bits 8
-
- begin codes
- power 0x01
- 1 0x02
- 2 0x03
- 3 0x04
- 4 0x05
- 5 0x06
- 6 0x07
- 7 0x08
- 8 0x09
- 9 0x0a
- 0 0x0b
- cmss 0x0c
- mute 0x0d
- rec 0x0e
- vol- 0x0f
- vol+ 0x10
- stop-eject 0x11
- play-pause 0x12
- slow 0x13
- prev 0x14
- next 0x15
- step 0x16
- eax 0x17
- options 0x18
- display 0x19
- return 0x1a
- start 0x1b
- cancel 0x1c
- up 0x1d
- left 0x1e
- ok 0x1f
- right 0x20
- down 0x21
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox
deleted file mode 100644
index c5d2d9c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# contributed by Juergen Jaeschke <jaeschke.privat@gmx.de>
-#
-# brand: Creative
-# model: Creative BreakOut-Box Remote Control
-#
-
-begin remote
-
- name Creative BreakOut-Box IR
- bits 8
- eps 30
- aeps 100
- one 0 0
- zero 0 0
- gap 199984
- toggle_bit 0
-
- begin codes
- DVD/CD 0x0000000000000001
- DVR/TV 0x0000000000000000
- MENU 0x0000000000000003
- LANG 0x0000000000000005
- PLAYLIST 0x0000000000000011
- BACKWARD 0x000000000000000A
- PLAY 0x0000000000000008
- FORWARD 0x000000000000000F
- LAST 0x0000000000000002
- STOP 0x0000000000000007
- NEXT 0x0000000000000006
- MUTE 0x0000000000000014
- STEP 0x0000000000000009
- UP 0x000000000000000C
- LEFT 0x000000000000000B
- RIGHT 0x000000000000000D
- DOWN 0x000000000000000E
- VOL+ 0x0000000000000012
- VOL- 0x0000000000000015
- OK 0x0000000000000011
- ANGLE+ 0x0000000000000010
- ANGLE- 0x0000000000000013
- REC 0x0000000000000004
- 1 0x0000000000000016
- 2 0x0000000000000017
- 3 0x0000000000000018
- 4 0x0000000000000019
- 5 0x000000000000001A
- 6 0x000000000000001B
- 7 0x000000000000001C
- 8 0x000000000000001D
- 9 0x000000000000001E
- 0 0x000000000000001F
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative
deleted file mode 100644
index 69f3d27..0000000
--- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001
-#
-# contributed by Stephen White <stephen@earth.li>
-#
-# brand: Creative
-# model: PC-DVD Remote
-# supported devices: Creative-Infra-Receiver
-#
-
-begin remote
-
- name CREATIVE_INFRA_DVD
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9293 4302
- one 771 1494
- zero 771 358
- ptrail 756
- pre_data_bits 16
- pre_data 0x8435
- gap 108646
- toggle_bit 0
-
- begin codes
- play 0x00000000000005FA
- stop 0x00000000000016E9
- pause 0x00000000000000FF
- eject 0x00000000000002FD
- last 0x00000000000017E8
- rrev 0x00000000000004FB
- ffwd 0x00000000000006F9
- next 0x00000000000001FE
- 1 0x00000000000008F7
- 2 0x00000000000009F6
- 3 0x0000000000000AF5
- shift 0x00000000000014EB
- 4 0x0000000000000CF3
- 5 0x0000000000000DF2
- 6 0x0000000000000EF1
- mouse 0x00000000000007F8
- 7 0x00000000000010EF
- 8 0x00000000000011EE
- 9 0x00000000000012ED
- vol+ 0x0000000000000FF0
- start 0x00000000000003FC
- 0 0x00000000000015EA
- mute 0x0000000000000BF4
- vol- 0x00000000000013EC
- end codes
-
-end remote
-
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd
deleted file mode 100644
index cdaaad9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001
-#
-# contributed by
-#
-# brand: Creative
-# model: CD-Rom Creditcard-sized IR-Controller
-# supported devices: CD-Rom
-#
-
-begin remote
-
- name CREATIVE_INFRA
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9051 4625
- one 534 1707
- zero 534 588
- ptrail 490
- repeat 9039 2363
- pre_data_bits 16
- pre_data 0x8435
- gap 108434
- min_repeat 1
- toggle_bit 0
-
-
- begin codes
- PAUSE 0x00000000000001FE
- PLAY 0x00000000000002FD
- STOP 0x00000000000003FC
- REW 0x00000000000005FA
- PREV 0x00000000000006F9
- FF 0x00000000000007F8
- MENU 0x00000000000004FB
- MOUSE 0x00000000000008F7
- 1 0x00000000000009F6
- 2 0x0000000000000AF5
- 3 0x0000000000000BF4
- 4 0x0000000000000DF2
- 5 0x0000000000000EF1
- 6 0x0000000000000FF0
- 7 0x00000000000011EE
- 8 0x00000000000012ED
- 9 0x00000000000013EC
- 0 0x00000000000016E9
- MUTE 0x0000000000000CF3
- VOL_UP 0x00000000000010EF
- VOL_DOWN 0x00000000000014EB
- SHIFT 0x00000000000015EA
- ENTER 0x00000000000017E8
- ZOOM 0x00000000000018E7
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive
deleted file mode 100644
index b68e5c4..0000000
--- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# contributed by Andrew de Quincey
-#
-# brand: rm1000w
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name rm1000w
- flags SPACE_ENC|CONST_LENGTH
- bits 16
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- pre_data_bits 16
- pre_data 0x8322
- gap 108000
- toggle_bit 0
-
- repeat 9000 2250
-
- frequency 38000
- duty_cycle 33
-
-
- begin codes
- 1 0x0000000000008B74
- 2 0x0000000000008F70
- 3 0x000000000000906F
- 4 0x0000000000008A75
- 5 0x000000000000847B
- 6 0x0000000000007887
- 7 0x0000000000008976
- 8 0x000000000000837C
- 9 0x0000000000007788
- 0 0x000000000000807F
- stop 0x000000000000857A
- play 0x0000000000007986
- pause 0x0000000000007986
- slow 0x0000000000007D82
- step 0x0000000000007E81
- prev 0x0000000000007F80
- next 0x0000000000007A85
- mute 0x0000000000006E91
- vol- 0x000000000000639C
- vol+ 0x000000000000629D
- eax 0x0000000000008C73
- options 0x000000000000827D
- display 0x0000000000007689
- return 0x0000000000008E71
- start 0x0000000000008877
- close 0x0000000000007C83
- up 0x0000000000007B84
- down 0x0000000000008D72
- left 0x0000000000008778
- right 0x000000000000758A
- ok 0x000000000000817E
- power 0x000000000000619e
- cmss 0x000000000000718e
- record 0x000000000000738c
-
- end codes
-
-end remote
-
-#
-# contributed by Stefan Br�ns
-#
-# brand: Creative Audigy 2 ZS Platinum LiveDrive
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-
-begin remote
-
-
- name LiveDrive
- flags SPACE_ENC|CONST_LENGTH
- bits 16
- eps 30
- aeps 100
-
-
- header 9000 4500
- one 563 1687
- zero 563 562
- pre_data_bits 16
- pre_data 0x8000
- gap 108000
- toggle_bit 0
-
-
- repeat 9000 2250
-
-
- frequency 38000
- duty_cycle 33
-
-
-
-
- begin codes
- mute 0x0000000000000040
- vol+ 0x0000000000008080
- vol- 0x0000000000008082
- cmss 0x0000000000000080
- end codes
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV
deleted file mode 100644
index fbc91a8..0000000
--- a/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV
+++ /dev/null
@@ -1,221 +0,0 @@
-#
-# contributed by Chris Pascoe
-#
-# brand: DVICO
-# model no. of remote control: DVB-T
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name DVICO
- bits 32
- eps 0
- aeps 0
-
- one 0 0
- zero 0 0
- pre_data_bits 32
- pre_data 0x10046
- gap 195755
- post_data_bits 0
- toggle_bit 0
-
- begin codes
- 1 0x00000000000011F9
- 2 0x00000000000012F9
- 3 0x00000000000013F9
- 4 0x00000000000014F9
- 5 0x00000000000015F9
- 6 0x00000000000016F9
- 7 0x00000000000017F9
- 8 0x00000000000018F9
- 9 0x00000000000019F9
- 0 0x00000000000010F9
- power 0x0000000000000AF9
- pcoff 0x0000000000000CF9
- camera 0x0000000000001AF9
- record 0x0000000000001BF9
- chup 0x00000000000000F9
- chdown 0x00000000000001F9
- volup 0x00000000000002F9
- voldown 0x00000000000003F9
- playpause 0x0000000000001FF9
- rew 0x0000000000001CF9
- stop 0x0000000000001EF9
- ff 0x0000000000001DF9
- folder 0x00000000000040F9
- atvdtv 0x00000000000006F9
- dvhs 0x00000000000041F9
- menu 0x00000000000008F9
- aspect 0x00000000000007F9
- zoom 0x00000000000004F9
- epg 0x0000000000000BF9
- mute 0x0000000000000DF9
- back 0x0000000000000EF9
- hd 0x0000000000000FF9
- red 0x00000000000005F9
- green 0x00000000000009F9
- yellow 0x00000000000042F9
- blue 0x00000000000043F9
- end codes
-
-end remote
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005
-#
-# contributed by anonymous
-#
-# brand: DVICO
-# model no. of remote control: MCE Remote
-#
-
-begin remote
-
- name DVICO_MCE
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x0
- post_data_bits 8
- post_data 0x0
- gap 195956
- toggle_bit 0
-
-
- begin codes
- ok 0x0000000000FE5E00
- dtv 0x0000000000FE0200
- mp3 0x0000000000FE0E00
- dvd 0x0000000000FE1A00
- cpf 0x0000000000FE1E00
- setup 0x0000000000FE1600
- tv_onoff 0x0000000000FE4600
- guide 0x0000000000FE0A00
- back 0x0000000000FE4900
- more 0x0000000000FE5900
- dvd_menu 0x0000000000FE4D00
- alt_tab 0x0000000000FE5500
- replay 0x0000000000FE0F00
- skip 0x0000000000FE1200
- up 0x0000000000FE5100
- down 0x0000000000FE5300
- left 0x0000000000FE5B00
- right 0x0000000000FE5F00
- start 0x0000000000FE4200
- vol_up 0x0000000000FE1500
- vol_down 0x0000000000FE0500
- ch_up 0x0000000000FE1100
- ch_down 0x0000000000FE0900
- snapshot 0x0000000000FE5200
- live 0x0000000000FE5A00
- folder_open 0x0000000000FE1900
- 1 0x0000000000FE0B00
- 2 0x0000000000FE1700
- 3 0x0000000000FE1B00
- 4 0x0000000000FE0700
- 5 0x0000000000FE5000
- 6 0x0000000000FE5400
- 7 0x0000000000FE4800
- 8 0x0000000000FE4C00
- 9 0x0000000000FE5800
- 0 0x0000000000FE0300
- aspect 0x0000000000FE1300
- fullscreen 0x0000000000FE1F00
- rewind 0x0000000000FE4300
- playpause 0x0000000000FE4700
- fastforward 0x0000000000FE4F00
- stop 0x0000000000FE0D00
- mute 0x0000000000FE5700
- record 0x0000000000FE0100
- white_onoff 0x0000000000FE4E00
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005
-#
-# contributed by: David Bussenschutt <buzz|oska.com>
-#
-# brand: "DViCO"
-# model no. of remote control: "Fusion Remote MCE"
-# devices being controlled by this remote: My MythTV install
-#
-
-begin remote
-
- name DVICO_MCE
- bits 8
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 48
- pre_data 0x100460000
- post_data_bits 8
- post_data 0xFE
- gap 195843
- toggle_bit 0
-
-
- begin codes
- ok 0x5e
- up 0x51
- down 0x53
- left 0x5B
- right 0x5F
- setup 0x16
- tv_onoff 0x46
- guide 0x0A
- dtv 0x02
- mp3 0x0E
- dvd 0x1A
- cpf 0x1E
- back 0x49
- more 0x59
- dvd_menu 0x4D
- alt_tab 0x55
- replay 0x0F
- skip 0x12
- start 0x42
- vol_up 0x15
- vol_down 0x05
- ch_up 0x11
- ch_down 0x09
- photo 0x52
- live 0x5A
- folder 0x19
- 1 0x0B
- 2 0x17
- 3 0x1B
- 4 0x07
- 5 0x50
- 6 0x54
- 7 0x48
- 8 0x4C
- 9 0x58
- 0 0x03
- ratio 0x13
- zoom 0x1F
- rew 0x43
- playpause 0x47
- ff 0x4F
- mute 0x57
- stop 0x0D
- rec 0x01
- power_onoff 0x4e
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65
deleted file mode 100644
index a10181d..0000000
--- a/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65
+++ /dev/null
@@ -1,73 +0,0 @@
-#
-# Config file for AOpen XC Cube EA65, EA65-II
-# Max Krasnyanskiy <maxk@qualcomm.com>
-#
-
-begin remote
- name EA65
- bits 24
- eps 10
- aeps 100
-
- gap 960000
- toggle_bit 0
-
- begin codes
- tv/pvr 0x0014814c
- photo 0x0017810e
- htpc 0x0011811b
- dvd/vcd 0x00128100
- cd/mp3 0x00138152
- fm 0x00158111
- video 0x0016810f
-
- 1 0x0041810b
- 2 0x00428115
- 3 0x00438112
- 4 0x00448141
- 5 0x00458119
- 6 0x00468116
- 7 0x00478150
- 8 0x0048811a
- 9 0x00498155
- * 0x00328156
- 0 0x00408158
- # 0x0030814d
-
- menu 0x00188104
- exit 0x001d8154
- enter 0x001e8101
- up 0x00198159
- down 0x001a811c
- left 0x001c8102
- right 0x001b815d
-
- vol+ 0x00298103
- vol- 0x002a814e
- ch+ 0x002c8113
- ch- 0x002d8117
- mute 0x00288105
- tune+ 0x002e8144
- tune- 0x002f8148
- mem 0x00318145
- scan 0x00278151
-
- display 0x0034811f
- eject 0x0035815c
- rwnd 0x00228118
- ffwd 0x00218110
- rec 0x002b810a
- repeate 0x0038815a
- prev 0x00238107
- next 0x00248114
- time/shift 0x00338108
- stop 0x0020811d
- play/pause 0x001f8109
-
- play-pause 0x0080811d
- stop-eject 0x00238107
- mode- 0x00ff1080
- mode+ 0x00ff1180
- end codes
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65
deleted file mode 100644
index fd96d42..0000000
--- a/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65
+++ /dev/null
@@ -1,381 +0,0 @@
-#
-# Max Krasnyanskiy <maxk@qualcomm.com>
-#
-
-#
-# Xine key bindings.
-#
-
-# start playback
-begin
- button = dvd/vcd
- prog = xine
- repeat = 1
- config = Play
-end
-
-# playback pause toggle
-begin
- button = play/pause
- prog = xine
- repeat = 1
- config = Pause
-end
-
-# stop playback
-begin
- button = stop
- prog = xine
- repeat = 1
- config = Stop
-end
-
-# eject the current medium
-begin
- button = eject
- prog = xine
- repeat = 1
- config = Eject
-end
-
-# scan playlist to grab stream infos
-begin
- button = mem
- prog = xine
- repeat = 1
- config = ScanPlaylistInfo
-end
-
-# set position to -60 seconds in current stream
-begin
- button = rwnd
- prog = xine
- repeat = 1
- config = SeekRelative-60
-end
-
-# set position to +60 seconds in current stream
-begin
- button = ffwd
- prog = xine
- repeat = 1
- config = SeekRelative+60
-end
-
-# increment playback speed
-begin
- button = tune+
- prog = xine
- repeat = 1
- config = SpeedFaster
-end
-
-# decrement playback speed
-begin
- button = tune-
- prog = xine
- repeat = 1
- config = SpeedSlower
-end
-
-# increment audio volume
-begin
- button = vol+
- prog = xine
- repeat = 1
- config = Volume+
-end
-
-# decrement audio volume
-begin
- button = vol-
- prog = xine
- repeat = 1
- config = Volume-
-end
-
-# audio muting toggle
-begin
- button = mute
- prog = xine
- repeat = 1
- config = Mute
-end
-
-# select next audio channel
-begin
- button = ch+
- prog = xine
- repeat = 1
- config = AudioChannelNext
-end
-
-# select previous audio channel
-begin
- button = ch-
- prog = xine
- repeat = 1
- config = AudioChannelPrior
-end
-
-# interlaced mode toggle
-begin
- button = scan
- prog = xine
- repeat = 1
- config = ToggleInterleave
-end
-
-# cycle aspect ratio values
-begin
- button = display
- prog = xine
- repeat = 1
- config = ToggleAspectRatio
-end
-
-# jump to Title Menu
-begin
- button = menu
- prog = xine
- repeat = 1
- config = TitleMenu
-end
-
-# menu navigate up
-begin
- button = up
- prog = xine
- repeat = 1
- config = EventUp
-end
-
-# menu navigate down
-begin
- button = down
- prog = xine
- repeat = 1
- config = EventDown
-end
-
-# menu navigate left
-begin
- button = left
- prog = xine
- repeat = 1
- config = EventLeft
-end
-
-# menu navigate right
-begin
- button = right
- prog = xine
- repeat = 1
- config = EventRight
-end
-
-# menu select
-begin
- button = enter
- prog = xine
- repeat = 1
- config = EventSelect
-end
-
-# jump to next chapter
-begin
- button = next
- prog = xine
- repeat = 1
- config = EventNext
-end
-
-# jump to previous chapter
-begin
- button = prev
- prog = xine
- repeat = 1
- config = EventPrior
-end
-
-# select a subtitle file
-begin
- button = repeat
- prog = xine
- repeat = 1
- config = SubSelector
-end
-
-# enter the number 0
-begin
- button = 0
- prog = xine
- repeat = 1
- config = Number0
-end
-
-# enter the number 1
-begin
- button = 1
- prog = xine
- repeat = 1
- config = Number1
-end
-
-# enter the number 2
-begin
- button = 2
- prog = xine
- repeat = 1
- config = Number2
-end
-
-# enter the number 3
-begin
- button = 3
- prog = xine
- repeat = 1
- config = Number3
-end
-
-# enter the number 4
-begin
- button = 4
- prog = xine
- repeat = 1
- config = Number4
-end
-
-# enter the number 5
-begin
- button = 5
- prog = xine
- repeat = 1
- config = Number5
-end
-
-# enter the number 6
-begin
- button = 6
- prog = xine
- repeat = 1
- config = Number6
-end
-
-# enter the number 7
-begin
- button = 7
- prog = xine
- repeat = 1
- config = Number7
-end
-
-# enter the number 8
-begin
- button = 8
- prog = xine
- repeat = 1
- config = Number8
-end
-
-# enter the number 9
-begin
- button = 9
- prog = xine
- repeat = 1
- config = Number9
-end
-
-# quit the program
-begin
- button = exit
- prog = xine
- repeat = 1
- config = Quit
-end
-
-##
-# End of xine key bindings.
-##
-
-## MPlayer lirc setup
-
-# Show OSD
-begin
- prog = mplayer
- button = menu
- repeat = 1
- config = osd
-end
-
-# Pause playback
-begin
- prog = mplayer
- button = play/pause
- repeat = 1
- config = pause
-end
-
-# Stop playback and exit
-begin
- prog = mplayer
- button = stop
- repeat = 1
- config = stop #quit
-end
-
-# Mute
-begin
- prog = mplayer
- button = mute
- repeat = 1
- config = mute
-end
-
-# Seek back 10 seconds
-begin
- prog = mplayer
- button = rwnd
- repeat = 1
- config = seek -10
-end
-
-# Seek forward 30 seconds
-begin
- prog = mplayer
- button = ffwd
- repeat = 1
- config = seek +10
-end
-
-# Quit
-begin
- prog = mplayer
- button = exit
- repeat = 1
- config = quit
-end
-
-# Seek forward 10 minutes
-begin
- prog = mplayer
- button = next
- repeat = 1
- config = seek +600
-end
-
-# Seek backward 10 minutes
-begin
- prog = mplayer
- button = prev
- repeat = 1
- config = seek -600
-end
-
-# Toggle full-screen
-begin
- prog = mplayer
- button = display
- repeat = 1
- config = vo_fullscreen
-end
diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg b/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte
deleted file mode 100644
index d2330a3..0000000
--- a/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-#
-# contributed by Vadim Shliakhov <svadim@nm.ru>
-#
-# brand: Ericsson
-# model: Mobile Phone over Bluetooth (BTE)
-#
-# supported devices:
-# Ericsson t520m, t630
-#
-
-begin remote
-
- name bte
- bits 16
-
- begin codes
- 0 0x0030
- 1 0x0031
- 2 0x0032
- 3 0x0033
- 4 0x0034
- 5 0x0035
- 6 0x0036
- 7 0x0037
- 8 0x0038
- 9 0x0039
- STAR 0x002a # '*'
- HASH 0x0023 # '#'
- UP 0x005e # '^'
- DOWN 0x0076 # 'v'
- LEFT 0x003c # '<'
- RIGHT 0x003e # '>'
- CANCEL 0x0063 # 'c'
- VOL_UP 0x0075 # 'u'
- VOL_DOWN 0x0064 # 'd'
-
-# t520m
- NO 0x0065 # 'e'
- YES 0x0073 # 's'
- OPTION 0x004c # 'L'
- MEMO 0x0047 # 'G' - hides dialog widget!
-
-# t630
- F_LEFT 0x005b # '['
- F_RIGHT 0x005d # ']' - triggers 'e'
- J_CLICK 0x3a4a # ':J' - triggers 'e'
- RETURN 0x3a52 # ':R' - triggers 'e'
- CAMERA 0x3a43 # ':C'
- WAP 0x3a4f # ':O'
-
- end codes
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf b/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf
deleted file mode 100644
index e645cba..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# generic Denon config file
-#
-# source: various
-#
-# used by: Denon, Sharp
-
-begin remote
-
- name DENON
- bits 15
- flags SPACE_ENC
- eps 30
- aeps 100
-
- one 275 1900
- zero 275 775
- ptrail 275
- gap 43000
- repeat_bit 0
-
-# frequency 32000
-# frequency is 455/12 according to stewart@neuron.com
-# remote is based on Sharp lc3715 IC
- frequency 38000
-# duty_cycle unknown
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf
deleted file mode 100644
index e786f2b..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# generic Motorola config file
-#
-# source: Motorola Application Note AN463
-# ICs 68HC05K0/MC144105/MC144107
-#
-# used by Grundig
-#
-# currently you have to create config files for such remotes manually
-# as irrecord always will record the start code
-
-begin remote
-
- name MOTOROLA_START/STOP
- flags SHIFT_ENC|CONST_LENGTH
- bits 10
- eps 10
- aeps 250
-
- header 512 2560
- one 512 512
- zero 512 512
- gap 32800
- repeat_bit 0
- frequency 32000
- duty_cycle 25
-
- begin codes
- START/STOP 0x0000000000000000
- end codes
-
-end remote
-
-begin remote
-
- name MOTOROLA
- flags SHIFT_ENC|CONST_LENGTH
- bits 10
- eps 10
- aeps 250
-
- header 512 2560
- one 512 512
- zero 512 512
- gap 131000
- repeat_bit 0
- frequency 32000
- duty_cycle 25
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf
deleted file mode 100644
index 51c31d9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# generic NEC config file
-#
-# source: CIrCC datasheet, exiting config files
-#
-# used by: Toshiba
-
-begin remote
-
- name NEC
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- pre_data_bits 16
-# just a guess
- gap 108000
-
- repeat 9000 4500
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf
deleted file mode 100644
index 068c253..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# generic NEC config file
-#
-# source: CIrCC datasheet, exiting config files
-#
-# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo,
-# Sanyo, Schneider, SEG, Yamaha
-
-
-begin remote
-
- name NEC
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- pre_data_bits 16
-# just a guess
- gap 108000
-
- repeat 9000 2250
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf
deleted file mode 100644
index 18ee327..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# generic NEC config file
-#
-# source: CIrCC datasheet, exiting config files
-#
-# used by: Canon, Creative, Domland, Orion
-
-begin remote
-
- name NEC
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- pre_data_bits 16
-# just a guess
- gap 108000
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf b/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf
deleted file mode 100644
index f62e3f9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# generic RC-5 config file
-#
-# source: SAA3010 datasheet
-#
-# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider
-
-begin remote
-
- name RC-5
- bits 6
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 889 889
- zero 889 889
- plead 889
- pre_data_bits 7
- gap 113792
- toggle_bit 2
-
-# frequency 35750
- frequency 36000
- duty_cycle 50
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf b/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf
deleted file mode 100644
index 9565707..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# generic RC-6 config file
-#
-# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
-# http://home.hccnet.nl/m.majoor/pronto.pdf
-#
-# used by: Philips
-
-begin remote
-
- name RC-6
- bits 8
- flags RC6|CONST_LENGTH
- eps 30
- aeps 100
-
- header 2667 889
- one 444 444
- zero 444 444
- pre_data_bits 13
- pre_data 0xEFB
- gap 108000
- toggle_bit 5
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf
deleted file mode 100644
index 89f847a..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-begin remote
-
- name RCMM-32
- bits 32
- flags RCMM|CONST_LENGTH
- eps 2
- aeps 100
-
- header 417 278
- three 167 778
- two 167 611
- one 167 444
- zero 167 278
- ptrail 167
- pre_data_bits 0
- gap 99817
- repeat_bit 0
-
- begin codes
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf b/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf
deleted file mode 100644
index b9702ea..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# generic RECS 80 config file
-#
-# source: SAA3008 datasheet
-#
-# used by: Saba, Technisat
-
-begin remote
-
- name RECS80
- bits 5
- flags SPACE_ENC|CONST_LENGTH
- eps 20
- aeps 150
-
- one 141 7590
- zero 141 5090
- ptrail 141
- pre_data_bits 6
- pre_data 0x22
- gap 121440
- toggle_bit 2
-
-# frequency 37916
- frequency 38000
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf b/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf
deleted file mode 100644
index fbcf8dc..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# generic Sanyo config file
-#
-# source: CIrCC datasheet, exiting config files
-# Sanyo LC7461M datasheet
-#
-# used by: Aiwa, Chinon, Sanyo
-
-begin remote
-
- name Sanyo
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- pre_data_bits 26
-# just a guess
- gap 108000
-
- repeat 9000 4500
-
-# 455kHz/12
- frequency 37916
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf b/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf
deleted file mode 100644
index d62d12c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# generic Sony 12-bit config file
-#
-# source: various
-#
-
-begin remote
-
- name SONY
- bits 7
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 2400 600
- one 1200 600
- zero 600 600
- post_data_bits 5
- gap 45000
- min_repeat 2
-
- frequency 40000
- duty_cycle 33
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf b/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf
deleted file mode 100644
index 4a64ca7..0000000
--- a/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# generic Sony 20-bit config file
-#
-# source: various
-#
-
-begin remote
-
- name SONY
- bits 7
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 2400 600
- one 1200 600
- zero 600 600
- post_data_bits 13
-# gap is just a guess
- gap 45000
- min_repeat 2
-
- frequency 40000
-# duty_cycle unknown
-
- begin codes
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
deleted file mode 100644
index 8e453b9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand: Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
- name Streamzap_PC_Remote
- bits 6
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 889 889
- zero 889 889
- plead 889
- pre_data_bits 8
- pre_data 0xA3
- gap 108344
- toggle_bit 2
-
-
- begin codes
- 0 0x00
- 1 0x01
- 2 0x02
- 3 0x03
- 4 0x04
- 5 0x05
- 6 0x06
- 7 0x07
- 8 0x08
- 9 0x09
- POWER 0x0A
- MUTE 0x0B
- CH_UP 0x0C
- VOL_UP 0x0D
- CH_DOWN 0x0E
- VOL_DOWN 0x0F
- UP 0x10
- LEFT 0x11
- OK 0x12
- RIGHT 0x13
- DOWN 0x14
- MENU 0x15
- EXIT 0x16
- PLAY 0x17
- PAUSE 0x18
- STOP 0x19
- |<< 0x1A
- >>| 0x1B
- RECORD 0x1C
- << 0x1D
- >> 0x1E
- RED 0x20
- GREEN 0x21
- YELLOW 0x22
- BLUE 0x23
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc
deleted file mode 100644
index 6f86bfe..0000000
--- a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc
+++ /dev/null
@@ -1,472 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'
-begin
- prog = mythtv
- button = 0
- config = 0
-end
-
-begin
- prog = mythtv
- button = 1
- config = 1
-end
-
-begin
- prog = mythtv
- button = 2
- config = 2
-end
-
-begin
- prog = mythtv
- button = 3
- config = 3
-end
-
-begin
- prog = mythtv
- button = 4
- config = 4
-end
-
-begin
- prog = mythtv
- button = 5
- config = 5
-end
-
-begin
- prog = mythtv
- button = 6
- config = 6
-end
-
-begin
- prog = mythtv
- button = 7
- config = 7
-end
-
-begin
- prog = mythtv
- button = 8
- config = 8
-end
-
-begin
- prog = mythtv
- button = 9
- config = 9
-end
-
-begin
- prog = mythtv
- button = POWER
- config = Esc
-end
-
-# ???
-begin
- prog = mythtv
- button = MUTE
- config = F9
-end
-
-begin
- prog = mythtv
- button = CH_UP
- repeat = 3
- config = Up
-end
-
-begin
- prog = mythtv
- button = VOL_UP
- repeat = 3
- config = ]
-end
-
-begin
- prog = mythtv
- button = CH_DOWN
- repeat = 3
- config = Down
-end
-
-begin
- prog = mythtv
- button = VOL_DOWN
- repeat = 3
- config = [
-end
-
-begin
- prog = mythtv
- button = UP
- repeat = 3
- config = Up
-end
-
-begin
- prog = mythtv
- button = LEFT
-# navigates, or skips back during playback or live tv.
- config = Left
-end
-
-begin
- prog = mythtv
- button = OK
- config = Return
-end
-
-begin
- prog = mythtv
- button = RIGHT
-# navigates, or skips forwards during playback or live tv.
- config = Right
-end
-
-begin
- prog = mythtv
- button = DOWN
- repeat = 3
- config = Down
-end
-
-begin
- prog = mythtv
- button = MENU
- config = m
-end
-
-begin
- prog = mythtv
- button = EXIT
- config = Esc
-end
-
-begin
- prog = mythtv
- button = PLAY
- config = l
-end
-
-begin
- prog = mythtv
- button = PAUSE
- config = p
-end
-
-begin
- prog = mythtv
- button = STOP
- config = Esc
-end
-
-begin
- prog = mythtv
- # skip backward
- button = |<<
- config = PgUp
-end
-
-begin
- prog = mythtv
- # skip forward
- button = >>|
- config = PgDown
-end
-
-begin
- prog = mythtv
- button = RECORD
- config = r
-end
-
-begin
- prog = mythtv
- # rewind
- button = <<
- config = <
-end
-
-begin
- prog = mythtv
- # fast forward
- button = >>
- config = >
-end
-
-begin
- prog = mythtv
- button = RED
- # Delete
- config = z
-end
-
-begin
- prog = mythtv
- button = GREEN
- # Info
- config = i
-end
-
-begin
- prog = mythtv
- button = YELLOW
- # change aspect ratio
- config = w
-end
-
-begin
- prog = mythtv
- button = BLUE
- config = Tab
-end
-
-# MPLAYER
-begin
- prog = mplayer
- button = POWER
- config = quit
-end
-
-begin
- prog = mplayer
- button = MUTE
- config = mute
-end
-
-begin
- prog = mplayer
- button = VOL_UP
- repeat = 3
- config = volume +1
-end
-
-begin
- prog = mplayer
- button = VOL_DOWN
- repeat = 3
- config = volume -1
-end
-
-begin
- prog = mplayer
- button = UP
- repeat = 3
- config = seek +10
-end
-
-begin
- prog = mplayer
- button = LEFT
-# navigates, or skips back during playback or live tv.
- config = seek -30
-end
-
-begin
- prog = mplayer
- button = RIGHT
-# navigates, or skips forwards during playback or live tv.
- config = seek +60
-end
-
-begin
- prog = mplayer
- button = DOWN
- repeat = 3
- config = seek -10
-end
-
-begin
- prog = mplayer
- button = EXIT
- config = quit
-end
-
-begin
- prog = mplayer
- button = play
- config = speed_set 1.0
-end
-
-begin
- prog = mplayer
- button = pause
- config = pause
-end
-
-begin
- prog = mplayer
- button = STOP
- config = quit
-end
-
-begin
- prog = mplayer
- # skip backward
- button = |<<
- config = seek -600
-end
-
-begin
- prog = mplayer
- # skip forward
- button = >>|
- config = seek +600
-end
-
-begin
- prog = mplayer
- # slow forward
- button = <<
- config = speed_mult 0.5
-end
-
-begin
- prog = mplayer
- # fast forward
- button = >>
- config = speed_mult 2.0
-end
-
-### Xine lirc setup By AnDy!
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = UP
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = DOWN
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = LEFT
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = RIGHT
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = >>
-repeat = 3
-#config = SpeedFaster
-config = SeekRelative+60
-end
-
-begin
-prog = xine
-button = <<
-repeat = 3
-#config = SpeedSlower
-config = SeekRelative-60
-end
-
-begin
-prog = xine
-button = VOL_UP
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VOL_DOWN
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = >>|
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = |<<
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = GREEN
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 3
-config = Quit
-end
diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg
deleted file mode 100644
index 4d1a5fe..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
deleted file mode 100644
index 4987807..0000000
--- a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge
+++ /dev/null
@@ -1,274 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
-#
-# contributed by Jens Leuschner <leuschner@gmx.net>
-#
-# brand: Hauppauge
-# model:
-# supported devices: WinTV primo; WinTV pci; WinTV radio
-#
-# This config file will work with both homebrew receivers and
-# original Hauppauge TV cards !!!
-#
-
-begin remote
-
- name Hauppauge
- bits 13
- flags SHIFT_ENC
- eps 30
- aeps 100
-
- one 950 830
- zero 950 830
- plead 960
- gap 89584
- repeat_bit 2
-
- begin codes
- TV 0x000000000000100F
- RADIO 0x000000000000100C
- FULL_SCREEN 0x000000000000102E
- CH+ 0x0000000000001020
- CH- 0x0000000000001021
- VOL- 0x0000000000001011
- VOL+ 0x0000000000001010
- MUTE 0x000000000000100D
- SOURCE 0x0000000000001022
- 1 0x0000000000001001
- 2 0x0000000000001002
- 3 0x0000000000001003
- 4 0x0000000000001004
- 5 0x0000000000001005
- 6 0x0000000000001006
- 7 0x0000000000001007
- 8 0x0000000000001008
- 9 0x0000000000001009
- 0 0x0000000000001000
- RESERVED 0x000000000000101E
- MINIMIZE 0x0000000000001026
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003
-#
-# contributed by
-#
-# brand: Hauppauge
-# model no. of remote control:
-# devices being controlled by this remote: PVR 2/350
-#
-
-begin remote
-
- name hauppauge_pvr
- bits 13
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 969 811
- zero 969 811
- plead 1097
- gap 114605
- toggle_bit 2
-
-
- begin codes
- Power 0x00000000000017FD
- Go 0x00000000000017FB
- 1 0x00000000000017C1
- 2 0x00000000000017C2
- 3 0x00000000000017C3
- 4 0x00000000000017C4
- 5 0x00000000000017C5
- 6 0x00000000000017C6
- 7 0x00000000000017C7
- 8 0x00000000000017C8
- 9 0x00000000000017C9
- Back/Exit 0x00000000000017DF
- 0 0x00000000000017C0
- Menu 0x00000000000017CD
- Red 0x00000000000017CB
- Green 0x00000000000017EE
- Yellow 0x00000000000017F8
- Blue 0x00000000000017E9
- Ch+ 0x00000000000017E0
- Ch- 0x00000000000017E1
- Vol- 0x00000000000017D1
- Vol+ 0x00000000000017D0
- Ok 0x00000000000017E5
- Mute 0x00000000000017CF
- Blank 0x00000000000017CC
- Full 0x00000000000017FC
- Rewind 0x00000000000017F2
- Play 0x00000000000017F5
- Forward 0x00000000000017F4
- Record 0x00000000000017F7
- Stop 0x00000000000017F6
- Pause 0x00000000000017F0
- Replay 0x00000000000017E4
- Skip 0x00000000000017DE
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
-#
-# contributed by
-#
-# brand: Hauppauge 350
-# Created: G.J. Werler (The Netherlands)
-# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
-# Date: 2004/11/28
-# model no. of remote control: Hauppauge A415-HPG
-# devices being controlled by this remote: PVR-350
-#
-
-begin remote
-
- name Hauppauge_350
- bits 13
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 969 811
- zero 969 811
- plead 1097
- gap 114605
- toggle_bit 2
-
-
- begin codes
- Go 0x00000000000017BB
- Power 0x00000000000017BD
- TV 0x000000000000179C
- Videos 0x0000000000001798
- Music 0x0000000000001799
- Pictures 0x000000000000179A
- Guide 0x000000000000179B
- Radio 0x000000000000178C
- Up 0x0000000000001794
- Left 0x0000000000001796
- Right 0x0000000000001797
- Down 0x0000000000001795
- OK 0x00000000000017A5
- Back/Exit 0x000000000000179F
- Menu/i 0x000000000000178D
- Vol+ 0x0000000000001790
- Vol- 0x0000000000001791
- Prev.Ch 0x0000000000001792
- Mute 0x000000000000178F
- Ch+ 0x00000000000017A0
- Ch- 0x00000000000017A1
- Record 0x00000000000017B7
- Stop 0x00000000000017B6
- Rewind 0x00000000000017B2
- Play 0x00000000000017B5
- Forward 0x00000000000017B4
- Replay/SkipBackward 0x00000000000017A4
- Pause 0x00000000000017B0
- SkipForward 0x000000000000179E
- 1 0x0000000000001781
- 2 0x0000000000001782
- 3 0x0000000000001783
- 4 0x0000000000001784
- 5 0x0000000000001785
- 6 0x0000000000001786
- 7 0x0000000000001787
- 8 0x0000000000001788
- 9 0x0000000000001789
- Asterix 0x000000000000178A
- 0 0x0000000000001780
- # 0x000000000000178E
- Red 0x000000000000178B
- Green 0x00000000000017AE
- Yellow 0x00000000000017B8
- Blue 0x00000000000017A9
- end codes
-
-end remote
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005
-#
-# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at
-# members of linux user group Vorarlberg www.lugv.at
-#
-# for ir remote controler from Hauppauge WinTV Nexus-S
-# most of the keys are supported
-#
-# brand: Hauppauge
-# model no. of remote control: WinTV Nexus-S
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name Hauppauge_WinTV_Nexus-S
- bits 13
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 944 828
- zero 944 828
- plead 980
- gap 113932
- min_repeat 1
- toggle_bit 2
-
-
- begin codes
- Up 0x0000000000001794
- Down 0x0000000000001795
- Left 0x0000000000001796
- Right 0x0000000000001797
- Power 0x00000000000017BD
- Ok 0x00000000000017A5
- Menu 0x000000000000178D
- Back 0x000000000000179F
- Red 0x000000000000178B
- Green 0x00000000000017AE
- Yellow 0x00000000000017B8
- Blue 0x00000000000017A9
- 0 0x0000000000001780
- 1 0x0000000000001781
- 2 0x0000000000001782
- 3 0x0000000000001783
- 4 0x0000000000001784
- 5 0x0000000000001785
- 6 0x0000000000001786
- 7 0x0000000000001787
- 8 0x0000000000001788
- 9 0x0000000000001789
- Play 0x00000000000017B5
- Pause 0x00000000000017B0
- Stop 0x00000000000017B6
- Record 0x00000000000017B7
- FastFwd 0x00000000000017B4
- FastRwd 0x00000000000017B2
- Channel+ 0x00000000000017A0
- Channel- 0x00000000000017A1
- Volume+ 0x0000000000001790
- Volume- 0x0000000000001791
- Mute 0x000000000000178F
- Timers 0x000000000000178A
- Recordings 0x000000000000178E
- Back 0x000000000000179F
- Record 0x00000000000017B7
- Pause 0x00000000000017B0
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
deleted file mode 100644
index d0f36e8..0000000
--- a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# lircmd config file
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * RESERVED
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_IN * CH+
-MOVE_OUT * CH-
-
-BUTTON1_TOGGLE * 5
-BUTTON1_TOGGLE * RADIO
-BUTTON2_TOGGLE * VOL+
-BUTTON3_TOGGLE * SOURCE
-
-BUTTON1_CLICK * TV
-BUTTON1_CLICK * VOL-
-BUTTON3_CLICK * MUTE
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg
deleted file mode 100644
index a40a1e8..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo
deleted file mode 100644
index 4b3d95a..0000000
--- a/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003
-#
-# contributed by Dimitris Michail <dmichail|yahoo.com>
-#
-# brand: Hercules
-# model no. of remote control: unknown
-# devices being controlled by this remote: Hercules SmartTV Stereo
-#
-# Works with module lirc_i2c, reports PV951 IR
-
-begin remote
-
- name HERCULES_SMARTTV_STEREO
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 16
- pre_data 0x61D6
- gap 199964
- toggle_bit 0
-
-
- begin codes
- POWER 0x00000000000048B7
- MUTE 0x000000000000C837
- PREVIEW 0x000000000000F00F
- FULLSCREEN 0x00000000000038C7
- AV/TV 0x0000000000008877
- TELETEXT 0x00000000000008F7
- 1 0x000000000000807F
- 2 0x00000000000040BF
- 3 0x000000000000C03F
- 4 0x00000000000020DF
- 5 0x000000000000A05F
- 6 0x000000000000609F
- 7 0x000000000000E01F
- 8 0x00000000000010EF
- 9 0x000000000000906F
- 0 0x00000000000000FF
- SNAPSHOT 0x00000000000050AF
- 100+ 0x000000000000E817
- CH+ 0x00000000000058A7
- CH- 0x0000000000007887
- VOL+ 0x000000000000D827
- VOL- 0x000000000000F807
- PAUSE 0x000000000000B04F
- RECORD 0x000000000000708F
- STOP 0x000000000000B847
- PLAY 0x0000000000009867
- TV_REPLAY 0x0000000000006897
- TIME_SHIFT 0x00000000000028D7
- SEEK_BACK 0x00000000000018E7
- SEEK_FWD 0x00000000000030CF
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf
deleted file mode 100644
index 97bbf4c..0000000
--- a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006
-#
-# contributed by M.Brakemeier
-#
-# brand: SoundGraph
-# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name iMON-PAD
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 235965
- min_repeat 1
- toggle_bit 0
-
- begin codes
- AppExit 0x288195B7
- Power 0x289115B7
- Record 0x298115B7
- Play 0x2A8115B7
- Open 0x29B1d5B7
- Rewind 0x2A8195B7
- Pause 0x2A9115B7
- FastForward 0x2B8115B7
- PrevChapter 0x2B9115B7
- Stop 0x2B9715B7
- NextChapter 0x298195B7
- Esc 0x2BB715B7
- Eject 0x299395B7
- AppLauncher 0x29B715B7
- MultiMon 0x2AB195B7
- TaskSwitcher 0x2A9395B7
- Mute 0x2B9595B7
- Vol+ 0x28A395B7
- Vol- 0x28A595B7
- Ch+ 0x289395B7
- Ch- 0x288795B7
- Timer 0x2B8395B7
- 1 0x28B595B7
- 2 0x2BB195B7
- 3 0x28B195B7
- 4 0x2A8595B7
- 5 0x299595B7
- 6 0x2AA595B7
- 7 0x2B9395B7
- 8 0x2A8515B7
- 9 0x2AA115B7
- 0 0x2BA595B7
- ShiftTab 0x28B515B7
- Tab 0x29A115B7
- Red 0x2B8515B7 # MyMovie
- Green 0x299195B7 # MyMusic
- Blue 0x2BA115B7 # MyPhoto
- Yellow 0x28A515B7 # MyTV
- Bookmark 0x288515B7
- Thumbnail 0x2AB715B7
- AspectRatio 0x29A595B7
- FullScreen 0x2AA395B7
- Purple 0x29A295B7 # MyDVD
- Menu 0x2BA385B7
- Caption 0x298595B7
- Language 0x2B8595B7
- MouseKeyboard 0x299115B7
- SelectSpace 0x2A9315B7
- MouseMenu 0x28B715B7
- MouseRightClick 0x688481B7
- Enter 0x28A195B7
- MouseLeftClick 0x688301B7
- WindowsKey 0x2B8195B7
- Backspace 0x28A115B7
- Mouse_N 0x690281B7
- Mouse_S 0x688291B7
- Mouse_W 0x6A8281B7
- Mouse_E 0x688A81B7
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc
deleted file mode 100644
index 3ad34d8..0000000
--- a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc
+++ /dev/null
@@ -1,240 +0,0 @@
-###################################
-# lircrc config as used by Stev391 June 2007
-# Not all of the buttons are configured yet, only the commonly used buttons
-###################################
-
-# Escape
-begin
- prog = mythtv
- button = AppExit
- config = Esc
- repeat = 3
-end
-
-# Escape Key 2
-begin
- prog = mythtv
- button = Esc
- config = Esc
-end
-
-# Channel Up
-begin
- prog = mythtv
- button = Ch+
- config = Up
- repeat = 3
-end
-
-# Channel Down
-begin
- prog = mythtv
- button = Ch-
- config = Down
- repeat = 3
-end
-
-# Volume Up
-begin
- prog = mythtv
- button = Vol+
- repeat = 3
- config = Right
-end
-
-# Volume Down
-begin
- prog = mythtv
- button = Vol-
- repeat = 3
- config = Left
-end
-
-# Enter/Return
-begin
- prog = mythtv
- button = Enter
- config = Return
-end
-
-# Menu Button
-begin
- prog = mythtv
- button = Menu
- config = M
-end
-
-# Mute
-begin
- prog = mythtv
- button = Mute
- config = F9
-end
-
-# Rewind
-begin
- prog = mythtv
- button = Rewind
- config = PgUp
-end
-
-# Fast Forward
-begin
- prog = mythtv
- button = FastForward
- config = PgDown
-end
-
-# Play
-begin
- prog = mythtv
- button = Play
- config = P
-end
-
-# Pause
-begin
- prog = mythtv
- button = Pause
- config = P
-end
-
-# Record
-begin
- prog = mythtv
- button = Record
- config = R
-end
-
-# Stop
-begin
- prog = mythtv
- button = Stop
- config = O
-end
-
-# Previous Track/Chapter
-begin
- prog = mythtv
- button = PrevChapter
- config = Home
-end
-
-# Next Track/Chapter
-begin
- prog = mythtv
- button = NextChapter
- config = End
-end
-
-# Jump Point to MythVideo
-begin
- prog = mythtv
- button = MyMovie
- config = F12
-end
-
-# Jump Point to MythMusic
-begin
- prog = mythtv
- button = MyMusic
- config = F11
-end
-
-# Jump Point to LiveTV
-begin
- prog = mythtv
- button = MyTV
- config = F10
-end
-
-# Jump Point to Main Menu
-begin
- prog = mythtv
- button = Multimon
- config = F2
-end
-
-# Jump Point to Myth Gallery
-begin
- prog = mythtv
- button = MyPhoto
- config = F3
-end
-
-# Jump Point to Play DVD
-begin
- prog = mythtv
- button = MyDVD
- config = F4
-end
-
-# Display Information
-begin
- prog = mythtv
- button = Caption
- config = I
-end
-
-##############################
-# Numbers
-##############################
-begin
- prog = mythtv
- button = 0
- config = 0
-end
-
-begin
- prog = mythtv
- button = 1
- config = 1
-end
-
-begin
- prog = mythtv
- button = 2
- config = 2
-end
-
-begin
- prog = mythtv
- button = 3
- config = 3
-end
-
-begin
- prog = mythtv
- button = 4
- config = 4
-end
-
-begin
- prog = mythtv
- button = 5
- config = 5
-end
-
-begin
- prog = mythtv
- button = 6
- config = 6
-end
-
-begin
- prog = mythtv
- button = 7
- config = 7
-end
-
-begin
- prog = mythtv
- button = 8
- config = 8
-end
-
-begin
- prog = mythtv
- button = 9
- config = 9
-end
diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon
deleted file mode 100644
index 6875f3f..0000000
--- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon
+++ /dev/null
@@ -1,79 +0,0 @@
-#
-# contributed by Venky Raju (dev@venky.ws)
-#
-# brand: Soundgraph
-# model no. of remote control: iMON MultiMedian
-#
-# devices being controlled by this remote: HTPC
-#
-
-begin remote
-
- name IMON_MultiMedian
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 130
-
- header 9000 4500
- one 625 1625
- zero 625 375
- ptrail 625
- repeat 8875 2125
- pre_data_bits 16
- pre_data 0x609F
- gap 100000
- toggle_bit 0
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- App.Exit 0x00000000000000FF
- Power 0x000000000000807F
- 1 0x00000000000040BF
- 2 0x000000000000C03F
- 3 0x00000000000020DF
- 4 0x000000000000A05F
- 5 0x000000000000609F
- 6 0x000000000000E01F
- 7 0x00000000000010EF
- 8 0x000000000000906F
- 9 0x00000000000050AF
- 0 0x000000000000D02F
- Windows 0x00000000000030CF
- Menu 0x000000000000B04F
- App.Launcher 0x000000000000708F
- Function 0x000000000000F00F
- Task.Switcher 0x00000000000008F7
- Back 0x0000000000008877
- Select 0x00000000000048B7
- Eject 0x0000000000009867
- Delete 0x00000000000018E7
- Up 0x000000000000C837
- Right 0x0000000000006897
- Down 0x000000000000E817
- Left 0x00000000000028D7
- Enter 0x000000000000A857
- Vol- 0x00000000000058A7
- Vol+ 0x000000000000D827
- Mute 0x00000000000038C7
- Play 0x000000000000B847
- Pause 0x0000000000007887
- Prev 0x000000000000F807
- Next 0x00000000000002FD
- Rew 0x000000000000827D
- Fwd 0x00000000000042BD
- Stop 0x000000000000C23D
- Open 0x00000000000022DD
- Rec 0x000000000000A25D
- Bookmark 0x000000000000629D
- Thumbnail 0x000000000000E21D
- Aspect 0x00000000000012ED
- DVD.Menu 0x000000000000926D
- DVD.Caption 0x00000000000052AD
- DVD.Language 0x000000000000D22D
- Full.Screen 0x00000000000032CD
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad
deleted file mode 100644
index e8b8818..0000000
--- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad
+++ /dev/null
@@ -1,84 +0,0 @@
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005
-#
-# contributed by Venky Raju
-#
-# brand: iMON-New
-# model no. of remote control: iMON-PAD
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name iMON-PAD
- bits 32
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 235965
- min_repeat 1
- toggle_bit 0
-
-
- begin codes
- AppExit 0x288195B7
- Record 0x298115B7
- Play 0x2A8115B7
- SlowMotion 0x29B195B7
- Rewind 0x2A8195B7
- Pause 0x2A9115B7
- FastForward 0x2B8115B7
- PrevChapter 0x2B9115B7
- Stop 0x2B9715B7
- NextChapter 0x298195B7
- Esc 0x2BB715B7
- Eject 0x299395B7
- AppLauncher 0x29B715B7
- MultiMon 0x2AB195B7
- TaskSwitcher 0x2A9395B7
- Mute 0x2B9595B7
- Vol+ 0x28A395B7
- Vol- 0x28A595B7
- Ch+ 0x289395B7
- Ch- 0x288795B7
- Timer 0x2B8395B7
- 1 0x28B595B7
- 2 0x2BB195B7
- 3 0x28B195B7
- 4 0x2A8595B7
- 5 0x299595B7
- 6 0x2AA595B7
- 7 0x2B9395B7
- 8 0x2A8515B7
- 9 0x2AA115B7
- 0 0x2BA595B7
- ShiftTab 0x28B515B7
- Tab 0x29A115B7
- MyMovie 0x2B8515B7
- MyMusic 0x299195B7
- MyPhoto 0x2BA115B7
- MyTV 0x28A515B7
- Bookmark 0x288515B7
- Thumbnail 0x2AB715B7
- AspectRatio 0x29A595B7
- FullScreen 0x2AA395B7
- MyDVD 0x29A295B7
- Menu 0x2BA385B7
- Caption 0x298595B7
- Language 0x2B8595B7
- MouseKeyboard 0x299115B7
- SelectSpace 0x2A9315B7
- MouseMenu 0x28B715B7
- MouseRightClick 0x688481B7
- Enter 0x28A195B7
- MouseLeftClick 0x688301B7
- WindowsKey 0x2B8195B7
- Backspace 0x28A115B7
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc
deleted file mode 100644
index cf6d2fc..0000000
--- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc
+++ /dev/null
@@ -1,109 +0,0 @@
-#
-# contributed by Venky Raju (dev@venky.ws)
-#
-# brand: Soundgraph
-# model no. of remote control: iMON RSC
-#
-# devices being controlled by this remote: HTPC
-#
-# Credit: Changwoo Ryu <cwryu@debian.org>
-#
-begin remote
-
- name IMON_RSC
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 40
- aeps 130
-
- header 9000 4500
- one 625 1625
- zero 625 375
- ptrail 625
- repeat 8875 2125
- pre_data_bits 16
- pre_data 0x0108
-
- gap 100000
-
- begin codes
- App.Exit 0x00000000000008F7
- Power 0x000000000000F40B
- ScreenSaver 0x00000000000052AD
- Timer 0x000000000000926D
- 1 0x0000000000002AD5
- 2 0x000000000000AA55
- 3 0x0000000000006A95
- 4 0x000000000000EA15
- 5 0x0000000000001AE5
- 6 0x0000000000009A65
- 7 0x0000000000005AA5
- 8 0x000000000000DA25
- 9 0x0000000000003AC5
- 0 0x000000000000BA45
- Desktop 0x000000000000817E
- Max/Res 0x00000000000041BE
- Esc 0x00000000000012ED
- Windows 0x000000000000D22D
- Menu 0x000000000000C13E
- App.Launcher 0x000000000000A25D
- Function 0x00000000000021DE
- Task.Switcher 0x000000000000629D
- Backspace 0x000000000000A15E
- Mouse/Keyboard 0x000000000000619E
- Space 0x000000000000E11E
- Shift.Tab 0x0000000000007887
- Enter 0x00000000000019E6
- Tab 0x000000000000F807
- L.Click 0x000000000000d827
- DragNDrop 0x0000000000006897
- R.Click 0x000000000000b847
- Mute 0x00000000000011ee
- Vol- 0x0000000000007a85
- Vol+ 0x000000000000fa05
- Play 0x00000000000032cd
- Pause 0x000000000000b24d
- Open 0x000000000000f20d
- Prev 0x0000000000000af5
- Next 0x0000000000008a75
- Stop 0x000000000000728d
- Rew 0x0000000000004ab5
- F.Fwd 0x000000000000ca35
- Full.Screen 0x000000000000916e
- end codes
-
-end remote
-
-begin remote
-
- name IMON_RSC_STICK
- bits 4
- flags SPACE_ENC
- eps 40
- aeps 130
-
- header 2125 1875
- one 625 1625
- zero 625 375
- ptrail 625
-
- begin codes
- STICK_N 0x0
- STICK_S 0x1
- STICK_E 0x2
- STICK_W 0x3
- STICK_NE 0x4
- STICK_SW 0x5
- STICK_SE 0x6
- STICK_NW 0x7
- STICK_NNE 0x8
- STICK_SSW 0x9
- STICK_SEE 0xa
- STICK_NWW 0xb
- STICK_NEE 0xc
- STICK_SWW 0xd
- STICK_SSE 0xe
- STICK_NNW 0xf
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci
deleted file mode 100644
index 076d032..0000000
--- a/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI
-#
-# this config file was automatically generated
-# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003
-#
-# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org)
-#
-# brand: I-O Data Co.
-# model: GV-BCTV5/PCI
-# supported devices: This remote control comes with the TV Tuner card
-# GV-BCTV5/PCI from I-O Data Co. (Japan)
-#
-
-begin remote
-
- name GV-BCTV5/PCI
- bits 8
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 149949
- toggle_bit 0
-
-
- begin codes
- TV 0x0000000000000042
- FM 0x0000000000000022
- EPG 0x0000000000000062
- POWER 0x0000000000000002
- 1 0x0000000000000052
- 2 0x0000000000000032
- 3 0x0000000000000072
- 4 0x000000000000004A
- 5 0x000000000000002A
- 6 0x000000000000006A
- 7 0x000000000000005A
- 8 0x000000000000003A
- 9 0x000000000000007A
- 10 0x0000000000000046
- 11 0x0000000000000026
- 12 0x0000000000000066
- LIVE 0x0000000000000012
- TIME_SHIFT 0x000000000000000A
- PLAY 0x000000000000001A
- MULTI 0x0000000000000006
- VIDEO 0x0000000000000056
- SVIDEO 0x000000000000004E
- CHANNEL_PLUS 0x0000000000000036
- CHANNEL_MINUS 0x000000000000002E
- VOLUME_PLUS 0x0000000000000076
- VOLUME_MINUS 0x000000000000006E
- MUTE 0x0000000000000016
- PICTURE_SIZE 0x000000000000000E
- PAUSE 0x000000000000005E
- HALT 0x000000000000003E
- RECORD 0x000000000000007E
- STOP 0x000000000000001E
- REWIND 0x0000000000000043
- START 0x0000000000000023
- FORWARD 0x0000000000000063
- SYNC 0x0000000000000003
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg b/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one
deleted file mode 100644
index b962433..0000000
--- a/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001
-#
-# contributed by Ulrich Mueller <ulrich.mueller42@web.de>
-#
-# brand: KNC ONE
-# model: TV Station (-/SE/PRO/RDS)
-#
-# brand: Anubis
-# model: Typhoon TView Tuner (-/Stereo/RDS)
-#
-
-begin remote
-
- name lircd.conf
- bits 8
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 199992
- toggle_bit 0
-
-
- begin codes
- TV/FM 0x000000000000001C
- OK 0x0000000000000015
- F1 0x000000000000000B
- POWER 0x0000000000000012
- AV/TV 0x0000000000000011
- TELETEXT 0x000000000000000F
- FULLSCREEN 0x0000000000000013
- MUTE 0x0000000000000010
- 1 0x0000000000000001
- 2 0x0000000000000002
- 3 0x0000000000000003
- 4 0x0000000000000004
- 5 0x0000000000000005
- 6 0x0000000000000006
- 7 0x0000000000000007
- 8 0x0000000000000008
- 9 0x0000000000000009
- 0 0x0000000000000000
- CH+ 0x000000000000001A
- CH- 0x000000000000001E
- VOL+ 0x000000000000001B
- VOL- 0x000000000000001F
- SNAPSHOT 0x000000000000000A
- 100+ 0x0000000000000017
- RECORD 0x000000000000000D
- PAUSE 0x000000000000000E
- PLAY 0x000000000000001D
- STOP 0x0000000000000019
- MENU 0x0000000000000016
- ESC 0x0000000000000014
- - 0x0000000000000018
- + 0x000000000000000C
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld
deleted file mode 100644
index 280c47d..0000000
--- a/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld
+++ /dev/null
@@ -1,144 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003
-#
-# contributed by Denes Balatoni <pnis at coder.hu>
-#
-# brand: kworld
-# model no. of remote control: ?
-# devices being controlled by this remote: tv878r tuner card
-#
-
-begin remote
-
- name kworld-878
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 8853 4526
- one 533 1713
- zero 533 589
- ptrail 531
- repeat 8853 2281
- pre_data_bits 16
- pre_data 0x61D6
- gap 107839
- toggle_bit 0
-
-
- begin codes
- power 0x0000000000007887
- source 0x000000000000E01F
- scan 0x00000000000038C7
- mute 0x00000000000018E7
- tv/fm 0x000000000000C03F
- 1 0x000000000000807F
- 2 0x000000000000D02F
- 3 0x000000000000D827
- fm_scan+ 0x000000000000F807
- 4 0x000000000000A05F
- 5 0x000000000000906F
- 6 0x000000000000A857
- fm_scan- 0x000000000000E817
- 7 0x000000000000609F
- 8 0x00000000000050AF
- 9 0x00000000000048B7
- fm_freq+ 0x00000000000030CF
- 0 0x00000000000040BF
- + 0x00000000000008F7
- recall 0x000000000000C837
- fm-freq- 0x00000000000020DF
- record 0x00000000000000FF
- stop 0x00000000000010EF
- play 0x0000000000008877
- minimze 0x000000000000F00F
- ch+ 0x000000000000F807
- zoom 0x0000000000009867
- vol- 0x00000000000028D7
- ch- 0x000000000000E817
- vol+ 0x0000000000006897
- snapshot 0x00000000000058A7
- mts 0x000000000000B04F
- function- 0x00000000000020DF
- function 0x000000000000708F
- function+ 0x00000000000030CF
- reset 0x000000000000B847
- end codes
-
-end remote
-
-
-#
-# this config file was automatically generated
-# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003
-#
-# contributed by Denes Balatoni <pnis at coder.hu>
-# Modified by Daniel Foote <freefoote at dview dot net> to
-# work with remote that came with DVB-T card.
-#
-# brand: kworld
-# model no. of remote control: ?
-# devices being controlled by this remote: tv878r tuner card
-#
-
-begin remote
-
- name KWorld_DVB-T
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 8853 4526
- one 533 1713
- zero 533 589
- ptrail 531
- repeat 8853 2281
- pre_data_bits 16
- pre_data 0x61D6
- gap 107839
- toggle_bit 0
-
-
- begin codes
- ch- 0x0000000000007887
- 7 0x000000000000E01F
- preview 0x00000000000038C7
- zoom 0x00000000000018E7
- 3 0x000000000000C03F
- 1 0x000000000000807F
- epg 0x000000000000D02F
- vol+ 0x000000000000D827
- vol- 0x000000000000F807
- 5 0x000000000000A05F
- 9 0x000000000000906F
- reset 0x000000000000A857
- turnleft 0x000000000000E817
- 6 0x000000000000609F
- 0 0x00000000000050AF
- power 0x00000000000048B7
- scan 0x00000000000030CF
- 2 0x00000000000040BF
- mute 0x00000000000008F7
- snap 0x000000000000C837
- 4 0x00000000000020DF
- turnup 0x00000000000000FF
- 8 0x00000000000010EF
- backward 0x0000000000008877
- source 0x000000000000F00F
- forward 0x0000000000009867
- pip 0x00000000000028D7
- ch- 0x000000000000E817
- play 0x0000000000006897
- ch+ 0x00000000000058A7
- stop 0x000000000000B04F
- function- 0x00000000000020DF
- pause 0x000000000000708F
- function+ 0x00000000000030CF
- rec 0x000000000000B847
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000
deleted file mode 100644
index 3adfd4b..0000000
--- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-# this config file was written on Mon Dec 13 23:51:16 MET 2004
-# by Thomas Reitmayr (treitmayr@yahoo.com)
-#
-# brand: Leadtek
-# model: Y0400052 (bundeled with Winfast PVR2000 TV-card)
-#
-# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a
-# limitation of the remote control.
-#
-
-
-begin remote
-
- name PVR2000
- bits 8
- flags SHIFT_ENC
- gap 120000
-
- begin codes
- POWER 0x0000000000000070
- TV 0x0000000000000026
- FM 0x0000000000000027
- DVD 0x0000000000000028
- RED 0x000000000000003B
- GREEN 0x000000000000003C
- YELLOW 0x000000000000003D
- BLUE 0x000000000000003E
- TELETEXT 0x000000000000006F
- SLEEP 0x0000000000000030
- MUTE 0x0000000000000064
- BOSS_KEY 0x0000000000000039
- CH_UP 0x000000000000007C
- CH_DOWN 0x0000000000000060
- VOL_DOWN 0x0000000000000078
- VOL_UP 0x0000000000000074
- ENTER 0x0000000000000063
- CC 0x0000000000000020
- FULLSCREEN 0x0000000000000073
- MENU 0x000000000000003F
- SCAN 0x0000000000000021
- REPLAY 0x0000000000000032
- PLAY 0x0000000000000033
- SKIP 0x0000000000000034
- OSD 0x0000000000000022
- BACK 0x0000000000000024
- STOP 0x0000000000000036
- FORWARD 0x0000000000000025
- LANGUAGE 0x0000000000000023
- 1 0x0000000000000075
- 2 0x0000000000000076
- 3 0x0000000000000077
- 4 0x0000000000000079
- 5 0x000000000000007A
- 6 0x000000000000007B
- 7 0x000000000000007D
- 8 0x000000000000007E
- 9 0x000000000000007F
- 0 0x0000000000000062
- . 0x0000000000000031
- RECALL 0x0000000000000061
- VIDEO 0x000000000000006E
- AUDIO 0x000000000000006B
- DISPLAY 0x0000000000000066
- SNAPSHOT 0x0000000000000038
- PIP 0x000000000000003A
- RECSTOP 0x0000000000000036
- REC 0x0000000000000037
- TIMESHIFT 0x0000000000000035
-
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007
deleted file mode 100644
index 47e5b8e..0000000
--- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007
+++ /dev/null
@@ -1,86 +0,0 @@
-# Made by Leandro Lucarella <luca@lugmen.org.ar>
-#
-# brand: Leadtek
-# model: RM-0007 (bundeled with WinView 601TV card)
-#
-# Based on Winfast TV200:
-# modified by CB
-#
-# contributed by Erik Christiansson, aka Sci
-# www.alphafish.com
-# erik@alphafish.com
-#
-# modifications based on the config files from
-# Juan Toledo <toledo@users.sourceforge.net> and
-# Markus Lischka <mlischka@users.sourceforge.net>
-#
-# With some modification based on a patch for WinView 601 made by
-# Juan FC. <juan@kili.com.ar>
-#
-# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to
-# be a hardware limitation.
-#
-
-begin remote
-
- name RM-0007
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 40
- aeps 100
-
- header 9000 4500
- one 629 1617
- zero 629 495
- ptrail 632
- repeat 9000 2250
- pre_data_bits 16
- pre_data 0xC03F
- gap 108000
- toggle_bit 0
-
- frequency 38000
- duty_cycle 33
-
- begin codes
-# 1st row of buttons
- POWER 0x00000000000000FF
- MENU 0x000000000000807F
- FM 0x00000000000040BF
- PC/TV 0x000000000000C03F
-# volume/channel
- VOL_UP 0x00000000000020DF
- VOL_DOWN 0x00000000000010EF
- CH_UP 0x00000000000030CF
- CH_DOWN 0x00000000000008F7
-# numbers pad
- 1 0x000000000000A05F
- 2 0x000000000000609F
- 3 0x000000000000E01F
- 4 0x000000000000906F
- 5 0x00000000000050AF
- 6 0x000000000000D02F
- 7 0x000000000000B04F
- 8 0x000000000000708F
- 9 0x000000000000F00F
- RETURN 0x0000000000008877
- 0 0x00000000000048B7
- DISPLAY 0x000000000000C837
-# unknown icon buttons
- HELP 0x00000000000038C7
- SCAN 0x000000000000A857
- OSD 0x0000000000006897
- OPTIONS 0x000000000000E817
-# labeled buttons
- MUTE 0x00000000000028D7
- MTS 0x000000000000D827
- VIDEO 0x0000000000007887
- CC 0x000000000000F807
-# color dots buttons
- RED 0x00000000000018E7
- GREEN 0x0000000000009867
- YELLOW 0x00000000000058A7
- BLUE 0x000000000000B847
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010
deleted file mode 100644
index e0efcba..0000000
--- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010
+++ /dev/null
@@ -1,101 +0,0 @@
-#
-# this config file was automatically generated
-# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002
-#
-# modified by CB
-#
-# contributed by Erik Christiansson, aka Sci
-# www.alphafish.com
-# erik@alphafish.com
-#
-# brand: Leadtek
-# model: RM-0010 (bundeled with TV2000 TV-card)
-#
-# modifications based on the config files from
-# Juan Toledo <toledo@users.sourceforge.net> and
-# Markus Lischka <mlischka@users.sourceforge.net>
-# Reza Naima
-#
-# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to
-# be a hardware limitation.
-#
-
-
-begin remote
-
- name RM-0010
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 40
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- repeat 9000 2250
- pre_data_bits 16
- pre_data 0xC03F
- gap 108000
- toggle_bit 0
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- POWER 0x00000000000000FF
- TV/FM 0x00000000000040BF
- SCAN 0x000000000000A857
- DISPLAY 0x0000000000006897
- 1 0x000000000000A05F
- 2 0x000000000000609F
- 3 0x000000000000E01F
- 4 0x000000000000906F
- 5 0x00000000000050AF
- 6 0x000000000000D02F
- 7 0x000000000000B04F
- 8 0x000000000000708F
- 9 0x000000000000F00F
- 0 0x00000000000048B7
- RECALL 0x0000000000008877
- ENTER 0x000000000000C837
- CC 0x000000000000F807
- MTS 0x000000000000D827
- FINE_DOWN 0x0000000000009867
- FINE_UP 0x00000000000018E7
- VIDEO 0x0000000000007887
- MUTE 0x00000000000028D7
- CH_UP 0x00000000000030CF
- CH_DOWN 0x00000000000008F7
- VOL_DOWN 0x00000000000010EF
- VOL_UP 0x00000000000020DF
- FULLSCREEN 0x000000000000C03F
-
-# The following are only supported by the remote control bundled with
-# the WinFast TV 2000 XP Deluxe card.
-
- SLEEP 0x00000000000002FD
- BOSS_KEY 0x000000000000926D
- RED 0x000000000000D22D
- GREEN 0x00000000000032CD
- YELLOW 0x000000000000B24D
- BLUE 0x000000000000728D
- PIP 0x00000000000052AD
- . 0x000000000000827D
- BACK 0x00000000000042BD
- PLAY 0x000000000000C23D
- NEXT 0x00000000000022DD
- TIMESHIFT 0x000000000000A25D
- STOP 0x000000000000629D
- REC 0x000000000000E21D
- SNAPSHOT 0x00000000000012ED
-
-# Only found on CoolCommand remote
-
- REPEAT 0x000000000000884B
- TELETEXT 0x000000000000F807
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007
deleted file mode 100644
index ef1992a..0000000
--- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control).
-#
-# Made by Leandro Lucarella <luca@lugmen.org.ar> based on mainstream lirc
-# Leadtek WinFast2000TV (RM-0010 remote control).
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * BLUE
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_IN * CH_UP
-MOVE_OUT * CH_DOWN
-
-BUTTON1_TOGGLE * RETURN
-BUTTON2_TOGGLE * 0
-BUTTON3_TOGGLE * DISPLAY
-
-BUTTON1_CLICK * MENU
-BUTTON1_CLICK * 5
-BUTTON2_CLICK * FM
-BUTTON3_CLICK * PC/TV
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010
deleted file mode 100644
index ce0eff4..0000000
--- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# lircmd config file
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 2 30 5
-
-ACTIVATE * SCAN
-
-MOVE_N * 2
-MOVE_N * CH_UP
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_E * VOL_UP
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_S * CH_DOWN
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_W * VOL_DOWN
-MOVE_NW * 1
-MOVE_IN * VIDEO
-MOVE_OUT * MUTE
-
-BUTTON1_TOGGLE * RECALL
-BUTTON2_TOGGLE * 0
-BUTTON3_TOGGLE * ENTER
-
-BUTTON1_CLICK * FULLSCREEN
-BUTTON2_CLICK * FINE_DOWN
-BUTTON3_CLICK * FINE_UP
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo
deleted file mode 100644
index 6402ed0..0000000
--- a/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002
-#
-# contributed by Jarek Zuk
-#
-# brand: LiveView
-# devices being controlled by this remote:
-# FlyVideo II
-# FlyVideo'98
-# FlyVideo 98/FM /2000S
-# Flyvideo 98FM (LR50Q)
-# Typhoon TView TV/FM Tuner
-#
-
-begin remote
-
- name flyvideo
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- repeat 9000 4500
- pre_data_bits 26
- pre_data 0x01A1F2F
- gap 108000
- toggle_bit 0
-
- frequency 37916
- duty_cycle 33
-
- begin codes
- 0 0x000000000000F00F
- 1 0x000000000000C03F
- 2 0x00000000000020DF
- 3 0x000000000000A05F
- 4 0x000000000000E01F
- 5 0x00000000000010EF
- 6 0x000000000000906F
- 7 0x000000000000D02F
- 8 0x00000000000030CF
- 9 0x000000000000B04F
- POWER 0x00000000000000FF
- MOUSE_MODE 0x000000000000807F
- FULL_SCREEN 0x00000000000040BF
- CHAN_PLUS 0x00000000000048B7
- CHAN_MINUS 0x000000000000C837
- CANCEL 0x000000000000F807
- ENTER 0x00000000000008F7
- VOL_PLUS 0x00000000000028D7
- VOL_MINUS 0x000000000000E817
- MENU 0x000000000000609F
- UP 0x000000000000708F
- DOWN 0x0000000000009867
- LEFT 0x000000000000609F
- RIGHT 0x000000000000A857
- INC 0x00000000000050AF
- DEC 0x0000000000006897
- ESC 0x00000000000058A7
- MUTE 0x000000000000D827
- RETURN 0x00000000000018E7
- CENTER 0x000000000000C837
-
- CHANELS 0x00000000000047B8
- REV 0x0000000000008778
- FWD 0x000000000000C738
- VIDEO 0x0000000000008877
-
-# from FlyVideo II config file
- Audio 0x000000000000A857
-# newly added by Jarek Zuk
- SQUARE 0x000000000000B847
- TAB_LEFT 0x0000000000007887
- TAB_RIGHT 0x00000000000038C7
- CENTER 0x000000000000C837
- LEFT 0x00000000000048B7
-
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo
deleted file mode 100644
index 71cac36..0000000
--- a/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# lircmd config file for FlyVideo98 remote control
-# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl>
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-#ACCELERATOR 2 30 5
-
-ACTIVATE * MOUSE_MODE
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-
-# These are lircmd-0.5.5 extensions
-MOVE_IN * VOL_PLUS
-MOVE_OUT * VOL_MINUS
-
-BUTTON1_CLICK * CANCEL
-BUTTON2_CLICK * 0
-BUTTON3_CLICK * ENTER
-
-BUTTON1_TOGGLE * UP
-BUTTON2_TOGGLE * VIDEO
-BUTTON3_TOGGLE * INC
diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo
deleted file mode 100644
index 2175201..0000000
--- a/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# This is an example of ~/.lircrc file
-# It is a copy of actual setup from my home machine.
-# Contributed by Pawel T. Jochym <jochym@ifj.edu.pl>
-#
-begin
- button = MOUSE_MODE
- mode = mouse
-end
-begin
- prog = irexec
- button = FULL_SCREEN
- config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 &
- mode = tv
- flags = once
-end
-begin
- button = ESC
- mode = system
- flags = once
-end
-begin system
- begin
- prog = irexec
- button = 1
- button = 2
- button = 3
- button = 6
- button = 3
- button = 6
- config = shutdown -r now
- flags = mode
- end
-end system
-
-begin tv
- begin
- prog = irxevent
- button = POWER
- config = Key q xawtv
- flags = mode
- end
- begin
- prog = irxevent
- button = FULL_SCREEN
- config = Key f xawtv
- config = Key f xawtv
- repeat = 1
- end
- begin
- prog = irxevent
- button = CHAN_MINUS
- repeat = 1
- config = Key Page_Down xawtv
- end
- begin
- prog = irxevent
- button = CHAN_PLUS
- repeat = 1
- config = Key Page_Up xawtv
- end
- begin
- prog = irxevent
- button = MENU
- repeat = 1
- config = Key c xawtv
- end
- begin
- prog = irxevent
- button = CHANELS
- repeat = 1
- config = Key ctrl-z xawtv
- end
- begin
- prog = irxevent
- button = MUTE
- config = Key Return xawtv
- end
- begin
- prog = irxevent
- button = VOL_PLUS
- repeat = 1
- config = Key KP_Add xawtv
- end
- begin
- prog = irxevent
- button = VOL_MINUS
- repeat = 1
- config = Key KP_Subtract xawtv
- end
- begin
- prog = irexec
- button = 1
- config = xawtv-remote setstation 0
- end
- begin
- prog = irexec
- button = 2
- config = xawtv-remote setstation 1
- end
- begin
- prog = irexec
- button = 3
- config = xawtv-remote setstation 2
- end
- begin
- prog = irexec
- button = 4
- config = xawtv-remote setstation 3
- end
- begin
- prog = irexec
- button = 5
- config = xawtv-remote setstation 4
- end
- begin
- prog = irexec
- button = 6
- config = xawtv-remote setstation 5
- end
- begin
- prog = irexec
- button = 7
- config = xawtv-remote setstation 6
- end
- begin
- prog = irexec
- button = 8
- config = xawtv-remote setstation 7
- end
-end tv
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg b/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech
deleted file mode 100644
index 1960b6f..0000000
--- a/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-#
-# contributed by Isaac Lauer
-#
-# brand: Logitech
-# model: Value Infrared Remote Control
-# supported devices:
-#
-
-begin remote
-
- name Logitech
- bits 8
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- one 0 833
- zero 833 0
- pre_data_bits 8
- pre_data 0xA0
- gap 29858
- repeat_bit 0
-
- begin codes
- POWER 0x0000000000000002
- 1 0x0000000000000015
- 2 0x0000000000000016
- 3 0x0000000000000014
- 4 0x0000000000000018
- 5 0x0000000000000019
- 6 0x0000000000000017
- 7 0x000000000000001C
- 8 0x000000000000001B
- 9 0x000000000000001A
- 0 0x000000000000001D
- PAUSE 0x0000000000000013
- EJECT 0x0000000000000011
- SEEK- 0x000000000000000E
- PLAY 0x000000000000000F
- SEEK+ 0x0000000000000010
- STOP 0x0000000000000012
- HELP 0x0000000000000001
- CH- 0x000000000000000D
- CH+ 0x000000000000000A
- VOL- 0x000000000000000C
- VOL+ 0x0000000000000009
- * 0x000000000000001F
- # 0x000000000000001E
- MUTE 0x000000000000000B
- BUTTONL_DOWN 0x0000000000000039
- BUTTONR_DOWN 0x000000000000003A
- BUTTON_UP 0x0000000000000038
- ENTER 0x0000000000000008
- CLOSE 0x0000000000000023
- TV 0x0000000000000004
- GDE 0x0000000000000005
- CD 0x0000000000000006
- MSG 0x0000000000000007
- PHONE 0x0000000000000003
- MOUSE_N 0x0000000000000040
- MOUSE_NNE 0x0000000000000041
- MOUSE_NE 0x0000000000000042
- MOUSE_NEE 0x0000000000000043
- MOUSE_E 0x0000000000000044
- MOUSE_SEE 0x0000000000000045
- MOUSE_SE 0x0000000000000046
- MOUSE_SSE 0x0000000000000047
- MOUSE_S 0x0000000000000048
- MOUSE_SSW 0x0000000000000049
- MOUSE_SW 0x000000000000004A
- MOUSE_SWW 0x000000000000004B
- MOUSE_W 0x000000000000004C
- MOUSE_NWW 0x000000000000004D
- MOUSE_NW 0x000000000000004E
- MOUSE_NNW 0x000000000000004F
- MOUSE_N 0x0000000000000050
- MOUSE_NNE 0x0000000000000051
- MOUSE_NE 0x0000000000000052
- MOUSE_NEE 0x0000000000000053
- MOUSE_E 0x0000000000000054
- MOUSE_SEE 0x0000000000000055
- MOUSE_SE 0x0000000000000056
- MOUSE_SSE 0x0000000000000057
- MOUSE_S 0x0000000000000058
- MOUSE_SSW 0x0000000000000059
- MOUSE_SW 0x000000000000005A
- MOUSE_SWW 0x000000000000005B
- MOUSE_W 0x000000000000005C
- MOUSE_NWW 0x000000000000005D
- MOUSE_NW 0x000000000000005E
- MOUSE_NNW 0x000000000000005F
- MOUSE_N 0x0000000000000060
- MOUSE_NNE 0x0000000000000061
- MOUSE_NE 0x0000000000000062
- MOUSE_NEE 0x0000000000000063
- MOUSE_E 0x0000000000000064
- MOUSE_SEE 0x0000000000000065
- MOUSE_SE 0x0000000000000066
- MOUSE_SSE 0x0000000000000067
- MOUSE_S 0x0000000000000068
- MOUSE_SSW 0x0000000000000069
- MOUSE_SW 0x000000000000006A
- MOUSE_SWW 0x000000000000006B
- MOUSE_W 0x000000000000006C
- MOUSE_NWW 0x000000000000006D
- MOUSE_NW 0x000000000000006E
- MOUSE_NWW 0x000000000000006F
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech
deleted file mode 100644
index d8067f5..0000000
--- a/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# lircmd config file for the Logitech control
-#
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 1 3 2
-
-#ACTIVATE * MENU
-
-
-MOVE_N Logitech MOUSE_N
-MOVE_N Logitech MOUSE_N
-
-MOVE_N Logitech MOUSE_NNE
-MOVE_NE Logitech MOUSE_NNE
-
-MOVE_NE Logitech MOUSE_NE
-MOVE_NE Logitech MOUSE_NE
-
-MOVE_E Logitech MOUSE_NEE
-MOVE_NE Logitech MOUSE_NEE
-
-MOVE_E Logitech MOUSE_E
-MOVE_E Logitech MOUSE_E
-
-MOVE_E Logitech MOUSE_SEE
-MOVE_SE Logitech MOUSE_SEE
-
-MOVE_SE Logitech MOUSE_SE
-MOVE_SE Logitech MOUSE_SE
-
-MOVE_S Logitech MOUSE_SSE
-MOVE_SE Logitech MOUSE_SSE
-
-MOVE_S Logitech MOUSE_S
-MOVE_S Logitech MOUSE_S
-
-MOVE_S Logitech MOUSE_SSW
-MOVE_SW Logitech MOUSE_SSW
-
-MOVE_SW Logitech MOUSE_SW
-MOVE_SW Logitech MOUSE_SW
-
-MOVE_W Logitech MOUSE_SWW
-MOVE_SW Logitech MOUSE_SWW
-
-MOVE_W Logitech MOUSE_W
-MOVE_W Logitech MOUSE_W
-
-MOVE_W Logitech MOUSE_NWW
-MOVE_NW Logitech MOUSE_NWW
-
-MOVE_NW Logitech MOUSE_NW
-MOVE_NW Logitech MOUSE_NW
-
-MOVE_N Logitech MOUSE_NNW
-MOVE_NW Logitech MOUSE_NNW
-
-BUTTON1_DOWN Logitech BUTTONL_DOWN
-BUTTON2_DOWN Logitech BUTTONR_DOWN
-
-BUTTON1_UP Logitech BUTTON_UP
-BUTTON2_UP Logitech BUTTON_UP
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
deleted file mode 100644
index ec3b73e..0000000
--- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# RC-6 config file
-#
-# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
-# http://home.hccnet.nl/m.majoor/pronto.pdf
-#
-# used by: Philips
-#
-#########
-#
-# Philips Media Center Edition remote control
-# For use with the USB MCE ir receiver
-#
-# Dan Conti dconti|acm.wwu.edu
-#
-# Radio, Print, RecTV are only available on the HP Media Center remote control
-#
-
-begin remote
-
- name mceusb
- bits 16
- flags RC6|CONST_LENGTH
- eps 30
- aeps 100
-
- header 2667 889
- one 444 444
- zero 444 444
- pre_data_bits 21
- pre_data 0x37FF0
- gap 105000
- toggle_bit 22
- rc6_mask 0x100000000
-
-
- begin codes
-
-# starts at af
- Radio 0x00007baf
- Print 0x00007bb1
- Videos 0x00007bb5
- Pictures 0x00007bb6
- RecTV 0x00007bb7
- Music 0x00007bb8
- TV 0x00007bb9
-# no ba - d8
- Guide 0x00007bd9
- LiveTV 0x00007bda
- DVD 0x00007bdb
- Back 0x00007bdc
- OK 0x00007bdd
- Right 0x00007bde
- Left 0x00007bdf
- Down 0x00007be0
- Up 0x00007be1
-# no e2,e3
- Replay 0x00007be4
- Skip 0x00007be5
- Stop 0x00007be6
- Pause 0x00007be7
- Record 0x00007be8
- Play 0x00007be9
- Rewind 0x00007bea
- Forward 0x00007beb
- ChanDown 0x00007bec
- ChanUp 0x00007bed
- VolDown 0x00007bee
- VolUp 0x00007bef
- More 0x00007bf0
- Mute 0x00007bf1
- Home 0x00007bf2
- Power 0x00007bf3
- Enter 0x00007bf4
- Clear 0x00007bf5
- Nine 0x00007bf6
- Eight 0x00007bf7
- Seven 0x00007bf8
- Six 0x00007bf9
- Five 0x00007bfa
- Four 0x00007bfb
- Three 0x00007bfc
- Two 0x00007bfd
- One 0x00007bfe
- Zero 0x00007bff
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb
deleted file mode 100644
index 041c2cb..0000000
--- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb
+++ /dev/null
@@ -1,104 +0,0 @@
-#
-# RC-6 config file
-#
-# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
-# http://home.hccnet.nl/m.majoor/pronto.pdf
-#
-# used by: Philips
-#
-#########
-#
-# Philips Media Center Edition remote control
-# For use with the USB MCE ir receiver
-#
-# Dan Conti dconti|acm.wwu.edu
-#
-# Updated with codes for MCE 2005 Remote additional buttons
-# *, #, Teletext, Red, Green, Yellow & Blue Buttons
-# Note: TV power button transmits no code until programmed.
-# Updated 12th September 2005
-# Graham Auld - mce|graham.auld.me.uk
-#
-# Radio, Print, RecTV are only available on the HP Media Center remote control
-#
-
-begin remote
-
- name mceusb
- bits 16
- flags RC6|CONST_LENGTH
- eps 30
- aeps 100
-
- header 2667 889
- one 444 444
- zero 444 444
- pre_data_bits 21
- pre_data 0x37FF0
- gap 105000
- toggle_bit 22
- rc6_mask 0x100000000
-
-
- begin codes
-
- Blue 0x00007ba1
- Yellow 0x00007ba2
- Green 0x00007ba3
- Red 0x00007ba4
- Teletext 0x00007ba5
-
-# starts at af
- Radio 0x00007baf
- Print 0x00007bb1
- Videos 0x00007bb5
- Pictures 0x00007bb6
- RecTV 0x00007bb7
- Music 0x00007bb8
- TV 0x00007bb9
-# no ba - d8
-
- Guide 0x00007bd9
- LiveTV 0x00007bda
- DVD 0x00007bdb
- Back 0x00007bdc
- OK 0x00007bdd
- Right 0x00007bde
- Left 0x00007bdf
- Down 0x00007be0
- Up 0x00007be1
-
- Star 0x00007be2
- Hash 0x00007be3
-
- Replay 0x00007be4
- Skip 0x00007be5
- Stop 0x00007be6
- Pause 0x00007be7
- Record 0x00007be8
- Play 0x00007be9
- Rewind 0x00007bea
- Forward 0x00007beb
- ChanDown 0x00007bec
- ChanUp 0x00007bed
- VolDown 0x00007bee
- VolUp 0x00007bef
- More 0x00007bf0
- Mute 0x00007bf1
- Home 0x00007bf2
- Power 0x00007bf3
- Enter 0x00007bf4
- Clear 0x00007bf5
- Nine 0x00007bf6
- Eight 0x00007bf7
- Seven 0x00007bf8
- Six 0x00007bf9
- Five 0x00007bfa
- Four 0x00007bfb
- Three 0x00007bfc
- Two 0x00007bfd
- One 0x00007bfe
- Zero 0x00007bff
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb
deleted file mode 100644
index 3738bfa..0000000
--- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb
+++ /dev/null
@@ -1,393 +0,0 @@
-# lircrc.mceusb
-
-###################
-#
-# MythTV
-#
-###################
-begin
- prog = mythtv
- button = One
- config = 1
-end
-
-begin
- prog = mythtv
- button = Two
- config = 2
-end
-
-begin
- prog = mythtv
- button = Three
- config = 3
-end
-
-begin
- prog = mythtv
- button = Four
- config = 4
-end
-
-begin
- prog = mythtv
- button = Five
- config = 5
-end
-
-begin
- prog = mythtv
- button = Six
- config = 6
-end
-
-begin
- prog = mythtv
- button = Seven
- config = 7
-end
-
-begin
- prog = mythtv
- button = Eight
- config = 8
-end
-
-begin
- prog = mythtv
- button = Nine
- config = 9
-end
-
-begin
- prog = mythtv
- button = Zero
- config = 0
-end
-
-begin
- prog = mythtv
- button = Back
- config = Esc
-end
-
-begin
- prog = mythtv
- button = Guide
- config = M
-end
-
-begin
- prog = mythtv
- button = More
- config = I
-end
-
-begin
- prog = mythtv
- button = VolDown
- config = F10
-end
-
-begin
- prog = mythtv
- button = VolUp
- config = F11
-end
-
-begin
- prog = mythtv
- button = Up
- config = Up
-end
-
-begin
- prog = mythtv
- button = Down
- config = Down
-end
-
-begin
- prog = mythtv
- button = Left
- config = Left
-end
-
-begin
- prog = mythtv
- button = Right
- config = Right
-end
-
-begin
- prog = mythtv
- button = Play
- config = Return
-end
-
-begin
- prog = mythtv
- button = OK
- config = Return
-end
-
-begin
- prog = mythtv
- button = Mute
- config = |
-end
-
-begin
- prog = mythtv
- button = Rewind
- config = Left
-end
-
-begin
- prog = mythtv
- button = Forward
- config = Right
-end
-
-begin
- prog = mythtv
- button = Record
- config = R
-end
-
-begin
- prog = mythtv
- button = Stop
- config = O
-end
-
-begin
- prog = mythtv
- button = Pause
- config = P
-end
-
-# Use for backwards commercial skip
-begin
- prog = mythtv
- button = Replay
- config = Q
-end
-
-# Use for forward commercial skip
-begin
- prog = mythtv
- button = Skip
- config = Z
-end
-
-
-###################
-#
-# MPlayer
-#
-###################
-begin
- prog = mplayer
- button = Stop
- config = quit
-end
-
-begin
- prog = mplayer
- button = Play
- config = seek +1
-end
-
-begin
- prog = mplayer
- button = More
- config = osd
-end
-
-begin
- prog = mplayer
- button = Replay
- config = seek -10
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = Skip
- config = seek +10
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = Rewind
- config = seek -30
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = Forward
- config = seek +30
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = Pause
- config = pause
-end
-
-begin
- prog = mplayer
- button = VolUp
- config = volume +1
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = VolDown
- config = volume -1
- repeat = 1
-end
-
-begin
- prog = mplayer
- button = Mute
- config = mute
-end
-
-###################
-#
-# Xine
-#
-###################
-# Xine lirc setup
-begin
-prog = xine
-button = Play
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = Stop
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = Back
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = Pause
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = Up
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = Down
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = Left
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = Right
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = Home
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = Forward
-repeat = 3
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = Rewind
-repeat = 3
-config = SpeedSlower
-end
-
-begin
-prog = xine
-button = VolUp
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VolDown
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = Mute
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = ChanUp
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = ChanDown
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = More
-repeat = 3
-config = OSDStreamInfos
-end
-
diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg b/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg
deleted file mode 100644
index 0aa6a4a..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg b/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg
deleted file mode 100644
index 1d887dd..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell
deleted file mode 100644
index b63ab25..0000000
--- a/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell
+++ /dev/null
@@ -1,94 +0,0 @@
-# Config file for Packard Bell Remotes (with repeat codes!)
-# created by Samuel Wood (sjw@umr.edu)
-#
-# brand: Packard Bell Remote
-# model: El Cheapo Packard Bell Remote
-#
-# This is a config file for the cheap excess Packard Bell remotes
-# you sometimes can buy from online auctions like www.onsale.com.
-#
-# The receiver that comes with it hooks into the serial port and works
-# fine with lirc 0.5.4.
-#
-# The receiver that comes with the remote is near garbage. If
-# you don't point almost directly at it, it will not detect. But
-# it's simpler than building your own. :-)
-#
-# Repeat works fine for me. You just have to modify or add the
-# "repeat=" lines in your .lircrc.
-#
-# irrecord was used to generate the file, then I modified and
-# added repeat codes.
-#
-# The button names used are identical to what was printed on the
-# remote, except for the number pads (using actual numbers like
-# "1" and so forth did not seem to work. Similarly, '*' is Star
-# and '#' is Hash. LMB and RMB refer to the two mousepad buttons
-# on the left and right respectively.
-#
-# I still need to modify the gap setting. Right now, if you don't
-# hold the button down long enough, it may not register, but if
-# you hold it too long, it will detect a repeat or two. Feel free
-# to modify this to work better. If you get it to work better, send
-# me a copy. :-)
-
-begin remote
-
- name PackBell
- bits 15
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9065 4500
- one 597 532
- zero 597 1643
- ptrail 597
- pre_data_bits 16
- pre_data 0xF708
- post_data_bits 1
- post_data 0x0
- gap 107000
- repeat_bit 0
- repeat 9050 2250
-
- begin codes
- Help 0x0000000000006F90
- Phone 0x0000000000004FB0
- Message 0x0000000000006E91
- SRS 0x0000000000004EB1
- CD 0x0000000000002FD0
- Aux1 0x0000000000000FF0
- Aux2 0x0000000000002ED1
- Aux3 0x0000000000000EF1
- LMB 0x00000000000023DC
- RMB 0x000000000000639C
- Up 0x00000000000037C8
- Down 0x00000000000057A8
- Left 0x0000000000007788
- Right 0x00000000000017E8
- Menu 0x0000000000007B84
- Mute 0x0000000000003BC4
- Enter 0x00000000000047B8
- CHUp 0x00000000000027D8
- CHDown 0x0000000000006798
- VolUp 0x0000000000005BA4
- VolDown 0x0000000000001BE4
- Display 0x00000000000007F8
- One 0x0000000000005EA1
- Two 0x0000000000001EE1
- Three 0x0000000000000BF4
- Four 0x0000000000007E81
- Five 0x0000000000003EC1
- Six 0x0000000000004BB4
- Seven 0x0000000000005FA0
- Eight 0x0000000000001FE0
- Nine 0x0000000000002BD4
- Zero 0x0000000000003FC0
- Star 0x0000000000007F80
- Hash 0x0000000000006B94
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak
deleted file mode 100644
index 0a11e58..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak
+++ /dev/null
@@ -1,116 +0,0 @@
-#
-#
-# contributed by P_awe_L pablozrudnika@wp.pl
-#
-# brand: PC MAK/MINIMAK LASER/MINIMAK
-# model: Value Infrared Remote Control
-# supported devices: PC MAK receiver
-#
-
-begin remote
-
- name PC_MAK
- bits 8
- flags SPACE_ENC|CONST_LENGTH
- eps 15
- aeps 100
-
- one 0 833
- zero 833 0
- pre_data_bits 8
- pre_data 0xAA
- gap 100000
- repeat_bit 0
-
- begin codes
- HOME 0x0000000000000001
- ARROW_UP 0x0000000000000002
- PG_UP 0x0000000000000003
- ARROW_LEFT 0x0000000000000004
- ENTER 0x0000000000000005
- ARROW_RIGHT 0x0000000000000006
- END 0x0000000000000007
- ARROW_DOWN 0x0000000000000008
- PG_DN 0x0000000000000009
- SPACE 0x000000000000000A
- TAB 0x000000000000000B
- ESC 0x000000000000000C
- ALT 0x000000000000000D
- PLAYLIST 0x000000000000000E
- LOAD 0x000000000000000F
- MOUSE_N 0x0000000000000010
- MOUSE_NE 0x0000000000000011
- MOUSE_E 0x0000000000000012
- MOUSE_SE 0x0000000000000013
- MOUSE_S 0x0000000000000014
- MOUSE_SW 0x0000000000000015
- MOUSE_W 0x0000000000000016
- MOUSE_NW 0x0000000000000017
- FULLSCREEN 0x0000000000000018
- BUTTONL_DOWN 0x0000000000000019
- BUTTONR_DOWN 0x000000000000001A
- POWER 0x000000000000001B
- A 0x000000000000001C
- B 0x000000000000001D
- C 0x000000000000001E
- D 0x000000000000001F
- VOL_DOWN 0x0000000000000020
- MUTE 0x0000000000000021
- VOL_UP 0x0000000000000022
- PLAY 0x0000000000000024
- PREV 0x0000000000000026
- PAUSE 0x0000000000000027
- NEXT 0x0000000000000028
- SKIP_BACK 0x0000000000000029
- STOP 0x000000000000002A
- SKIP_FORW 0x000000000000002B
- 1 0x0000000000000041
- 2 0x0000000000000042
- 3 0x0000000000000043
- 4 0x0000000000000044
- 5 0x0000000000000045
- 6 0x0000000000000046
- 7 0x0000000000000047
- 8 0x0000000000000048
- 9 0x0000000000000049
- 0 0x000000000000004A
- sTAB 0x000000000000004B
- sESC 0x000000000000004C
- sALT 0x000000000000004D
- sPLAYLIST 0x000000000000004E
- TXT 0x000000000000004F
- sMOUSE_N 0x0000000000000050
- sMOUSE_NE 0x0000000000000051
- sMOUSE_E 0x0000000000000052
- sMOUSE_SE 0x0000000000000053
- sMOUSE_S 0x0000000000000054
- sMOUSE_SW 0x0000000000000055
- sMOUSE_W 0x0000000000000056
- sMOUSE_NW 0x0000000000000057
- sOK 0x0000000000000058
- BUTTONL_UP 0x0000000000000059
- BUTTONR_UP 0x000000000000005A
- EXIT 0x000000000000005B
- E 0x000000000000005C
- F 0x000000000000005D
- G 0x000000000000005E
- H 0x000000000000005F
- sVOL_DOWN 0x0000000000000060
- sMUTE 0x0000000000000061
- sVOL_UP 0x0000000000000062
- sPLAY 0x0000000000000064
- sPREV 0x0000000000000066
- sPAUSE 0x0000000000000067
- sNEXT 0x0000000000000068
- ZOOM- 0x0000000000000069
- HELP 0x000000000000006A
- ZOOM+ 0x000000000000006B
- MM_PLAY 0x000000000000002F
- MM_PREV 0x0000000000000030
- MM_NEXT 0x0000000000000031
- MM_PAUSE 0x000000000000005F
- MM_BACK 0x0000000000000075
- MM_FORW 0x0000000000000079
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak
deleted file mode 100644
index d7c8dcf..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# lircmd config file for the PC_MAK control
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 1 25 2
-
-#ACTIVATE * MENU
-
-MOVE_N PC_MAK MOUSE_N
-MOVE_NE PC_MAK MOUSE_NE
-
-MOVE_E PC_MAK MOUSE_E
-MOVE_SE PC_MAK MOUSE_SE
-
-MOVE_S PC_MAK MOUSE_S
-MOVE_SW PC_MAK MOUSE_SW
-
-MOVE_W PC_MAK MOUSE_W
-MOVE_NW PC_MAK MOUSE_NW
-
-BUTTON1_CLICK PC_MAK BUTTONL_DOWN
-BUTTON3_CLICK PC_MAK BUTTONR_DOWN
-
-BUTTON1_TOGGLE PC_MAK BUTTONL_UP
-BUTTON3_TOGGLE PC_MAK BUTTONR_UP
diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak
deleted file mode 100644
index 414e38a..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak
+++ /dev/null
@@ -1,1310 +0,0 @@
-#####################################################################
-# contributed by P_awe_L pablozrudnika@wp.pl
-#####################################################################
-#
-# XMMS
-#
-#####################################################################
-begin xmms
- begin
- prog = irxevent
- button = LOAD
- config = Key shift-L xmms
- end
- begin
- prog = xmms
- button = play
- config = PLAY
- end
- begin
- prog = irxevent
- remote = *
- button = PLAYLIST
- config = Key alt-e XMMS
- end
- begin
- prog = irxevent
- remote = *
- button = FULLSCREEN
- config = Key ctrl-d XMMS
- end
- begin
- prog = xmms
- button = TXT
- config = PLAYLIST_CLEAR
- end
- begin
- prog = xmms
- button = load
- config = PLAYLIST_ADD .xmms/xmms.m3u
- end
- begin
- prog = xmms
- button = pause
- config = PAUSE
- end
- begin
- prog = xmms
- button = stop
- config = STOP
- end
- begin
- prog = xmms
- button = EXIT
- config = QUIT
- end
- begin
- prog = xmms
- button = NEXT
- config = NEXT
- end
- begin
- prog = xmms
- button = PREV
- config = PREV
- end
- begin
- prog = xmms
- button = SKIP_FORW
- repeat = 2
- config = FWD 3
- end
- begin
- prog = xmms
- button = SKIP_BACK
- repeat = 2
- config = BWD 3
- end
- begin
- prog = xmms
- button = VOL_UP
- repeat = 2
- config = VOL_UP 5
- end
- begin
- prog = xmms
- remote = *
- button = H
- repeat = 2
- config = VOL_DOWN 5
- end
-end xmms
-#####################################################################
-#
-# MPlayer
-#
-#####################################################################
-begin mplayer
- begin
- prog = mplayer
- remote = *
- button = PLAYLIST
- config = gui_playlist
- end
- begin
- prog = mplayer
- remote = *
- button = LOAD
- config = gui_loadfile
- end
- begin
- prog = mplayer
- remote = *
- button = TXT
- config = gui_loadsubtitle
- end
- begin
- prog = mplayer
- remote = *
- button = FULLSCREEN
- config = vo_fullscreen
- end
- begin
- prog = mplayer
- remote = *
- button = MUTE
- config = mute
- end
- begin
- prog = mplayer
- remote = *
- button = SKIP_FORW
- repeat = 1
- config = seek +10
- end
- begin
- prog = mplayer
- remote = *
- button = VOL_DOWN
- repeat = 1
- config = volume -1
- end
- begin
- prog = mplayer
- remote = *
- button = VOL_UP
- repeat = 1
- config = volume 1
- end
- begin
- prog = mplayer
- remote = *
- button = SKIP_BACK
- repeat = 1
- config = seek -10
- end
- begin
- prog = mplayer
- button = play
- config = pause
- end
- begin
- prog = mplayer
- button = pause
- config = pause
- end
- begin
- prog = mplayer
- button = stop
- config = seek 0 1\npause
- end
- begin
- prog = mplayer
- button = NEXT
- config = pt_step 1
- end
- begin
- prog = mplayer
- button = PREV
- config = pt_step -1
- end
- begin
- prog = mplayer
- button = EXIT
- config = quit
- end
-end mplayer
-#####################################################################
-#
-# GQview
-#
-#####################################################################
-begin gqview
- begin
- prog = irxevent
- remote = *
- button = EXIT
- config = Key ctrl-q GQview
- end
- begin
- prog = irxevent
- remote = *
- button = FULLSCREEN
- config = Key v GQview
- end
- begin
- prog = irxevent
- remote = *
- button = PREV
- repeat = 5
- config = Key Prior GQview
- end
- begin
- prog = irxevent
- remote = *
- button = SKIP_BACK
- config = Key Home GQview
- end
- begin
- prog = irxevent
- remote = *
- button = SKIP_FORW
- config = Key End GQview
- end
- begin
- prog = irxevent
- remote = *
- button = NEXT
- repeat = 5
- config = Key Next GQview
- end
- begin
- prog = irxevent
- button = ZOOM-
- repeat = 5
- config = Key minus GQview
- end
- begin
- prog = irxevent
- button = ZOOM+
- repeat = 5
- config = Key plus GQview
- end
- begin
- prog = irxevent
- button = C
- config = Key s GQview
- end
- begin
- prog = irxevent
- button = LOAD
- config = Key o GQview
- end
-end gqview
-#####################################################################
-#
-# Sterowanie Xwindow Linuxa
-#
-#####################################################################
-begin linux
- begin
- prog = irexec
- button = PAUSE
- config = xscreensaver-command -activate
- end
- begin
- prog = irxevent
- button = sNEXT
- config = Key alt-Escape RootWindow
- end
- begin
- prog = irxevent
- button = sPREV
- config = Key alt-shift-Escape RootWindow
- end
- begin
- prog = irexec
- button = STOP
- config = xset dpms force off
- end
- begin
- prog = irexec
- button = PLAY
- config = xset dpms force on
- end
- begin
- prog = irexec
- button = EXIT
- config = poweroff
- end
-end linux
-#####################################################################
-#
-# Xine
-#
-#####################################################################
-# Reduce the output window size.
-begin xine
- begin
- prog = xine
- button = xxxxx
- config = WindowReduce
- end
- # Enlarge the output window size.
- begin
- prog = xine
- button = xxxxx
- config = WindowEnlarge
- end
- # Select next sub picture (subtitle) channel.
- begin
- prog = xine
- button = NEXT
- config = SpuNext
- end
- # Select previous sub picture (subtitle) channel.
- begin
- prog = xine
- button = PREV
- config = SpuPrior
- end
- # Visibility toggle of control window.
- begin
- prog = xine
- button = xxxxx
- config = ControlShow
- end
- # Visibility toggle of output window visibility.
- begin
- prog = xine
- button = xxxxx
- config = ToggleWindowVisibility
- end
- # Select next audio channel.
- begin
- prog = xine
- button = xxxxx
- config = AudioChannelNext
- end
- # Select previous audio channel.
- begin
- prog = xine
- button = xxxxx
- config = AudioChannelPrior
- end
- # Visibility toggle of playlist editor window.
- begin
- prog = xine
- button = PLAYLIST
- config = PlaylistEditor
- end
- # Playback pause toggle.
- begin
- prog = xine
- button = PAUSE
- config = Pause
- end
- # Visibility toggle of UI windows.
- begin
- prog = xine
- button = xxxxx
- config = ToggleVisiblity
- end
- # Fullscreen toggle.
- begin
- prog = xine
- button = FULLSCREEN
- config = ToggleFullscreen
- end
- # Aspect ratio values toggle.
- begin
- prog = xine
- button = xxxxx
- config = ToggleAspectRatio
- end
- # Interlaced mode toggle.
- begin
- prog = xine
- button = xxxxx
- config = ToggleInterleave
- end
- # Quit the program.
- begin
- prog = irxevent
- button = EXIT
- config = Key q xine
- end
- # Start playback.
- begin
- prog = xine
- button = PLAY
- config = Play
- end
- # Visibility toggle of the setup window.
- begin
- prog = xine
- button = xxxxx
- config = SetupShow
- end
- # Stop playback.
- begin
- prog = xine
- button = STOP
- config = Stop
- end
- # Select and play next mrl in the playlist.
- begin
- prog = xine
- button = xxxxx
- config = NextMrl
- end
- # Select and play previous mrl in the playlist.
- begin
- prog = xine
- button = xxxxx
- config = PriorMrl
- end
- # Eject the current medium.
- begin
- prog = xine
- button = xxxxx
- config = Eject
- end
- # Set position to beginning of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition0%
- end
- # Set position to 10% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition10%
- end
- # Set position to 20% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition20%
- end
- # Set position to 30% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition30%
- end
- # Set position to 40% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition40%
- end
- # Set position to 50% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition50%
- end
- # Set position to 60% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition60%
- end
- # Set position to 70% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition70%
- end
- # Set position to 80% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition80%
- end
- # Set position to 90% of current stream.
- begin
- prog = xine
- button = xxxxx
- config = SetPosition90%
- end
- # Set position to -60 seconds in current stream.
- begin
- prog = xine
- button = xxxxx
- config = SeekRelative-60
- end
- # Set position to +60 seconds in current stream.
- begin
- prog = xine
- button = xxxxx
- config = SeekRelative+60
- end
- # Set position to -15 seconds in current stream.
- begin
- prog = xine
- button = SKIP_BACK
- config = SeekRelative-15
- end
- # Set position to +15 seconds in current stream.
- begin
- prog = xine
- button = SKIP_FORW
- config = SeekRelative+15
- end
- # Visibility toggle of mrl browser window.
- begin
- prog = xine
- button = xxxxx
- config = MrlBrowser
- end
- # Audio muting toggle.
- begin
- prog = xine
- button = MUTE
- config = Mute
- end
- # Change audio syncing.
- begin
- prog = xine
- button = xxxxx
- config = AudioVideoDecay+
- end
- # Change audio syncing.
- begin
- prog = xine
- button = xxxxx
- config = AudioVideoDecay-
- end
- # Reset audio video syncing offset.
- begin
- prog = xine
- button = xxxxx
- config = AudioVideoDecayReset
- end
- # Increment playback speed.
- begin
- prog = xine
- button = xxxxx
- config = SpeedFaster
- end
- # Decrement playback speed.
- begin
- prog = xine
- button = xxxxx
- config = SpeedSlower
- end
- # Increment audio volume.
- begin
- prog = xine
- button = VOL_UP
- config = Volume+
- end
- # Decrement audio volume.
- begin
- prog = xine
- button = VOL_DOWN
- config = Volume-
- end
- # Take a snapshot (Internal image fetch and save).
- begin
- prog = xine
- button = xxxxx
- config = Snapshot
- end
- # Resize output window to stream size1:1.
- begin
- prog = xine
- button = xxxxx
- config = Zoom1:1
- end
- # Grab pointer toggle.
- begin
- prog = xine
- button = xxxxx
- config = GrabPointer
- end
- # Menu 1 event.
- begin
- prog = xine
- button = xxxxx
- config = EventMenu1
- end
- # Menu 2 event.
- begin
- prog = xine
- button = xxxxx
- config = EventMenu2
- end
- # Menu 3 event.
- begin
- prog = xine
- button = xxxxx
- config = EventMenu3
- end
- # Up event.
- begin
- prog = xine
- button = xxxxx
- config = EventUp
- end
- # Down event.
- begin
- prog = xine
- button = xxxxx
- config = EventDown
- end
- # Left event.
- begin
- prog = xine
- button = xxxxx
- config = EventLeft
- end
- # Right event.
- begin
- prog = xine
- button = xxxxx
- config = EventRight
- end
- # Previous event.
- begin
- prog = xine
- button = xxxxx
- config = EventPrior
- end
- # Next event.
- begin
- prog = xine
- button = xxxxx
- config = EventNext
- end
- # Previous angle event.
- begin
- prog = xine
- button = xxxxx
- config = EventAnglePrior
- end
- # Next angle event.
- begin
- prog = xine
- button = xxxxx
- config = EventAngleNext
- end
- # Select event.
- begin
- prog = xine
- button = xxxxx
- config = EventSelect
- end
- # Zoom into video.
- begin
- prog = xine
- button = xxxxx
- config = ZoomIn
- end
- # Zoom out of video.
- begin
- prog = xine
- button = xxxxx
- config = ZoomOut
- end
- # Zoom into video horizontally, distorting aspect ratio.
- begin
- prog = xine
- button = xxxxx
- config = ZoomInX
- end
- # Zoom out of video horizontally, distorting aspect ratio.
- begin
- prog = xine
- button = xxxxx
- config = ZoomOutX
- end
- # Zoom into video vertically, distorting aspect ratio.
- begin
- prog = xine
- button = xxxxx
- config = ZoomInY
- end
- # Zoom out of video vertically, distorting aspect ratio.
- begin
- prog = xine
- button = xxxxx
- config = ZoomOutY
- end
- # Reset zooming.
- begin
- prog = xine
- button = xxxxx
- config = ZoomReset
- end
- # Toggle TV modes on the DXR3
- begin
- prog = xine
- button = xxxxx
- config = ToggleTVmode
- end
- # Visibility toggle of log viewer
- begin
- prog = xine
- button = xxxxx
- config = ViewlogShow
- end
-end xine
-#####################################################################
-#
-# XAWTV
-#
-#####################################################################
-begin xawtv
- begin
- prog = xawtv
- remote = *
- button = NEXT
- config = setstation next
- end
- begin
- prog = xawtv
- remote = *
- button = PREV
- config = setstation prev
- end
- begin
- prog = xawtv
- remote = *
- button = VOL_UP
- config = volume inc
- end
- begin
- prog = xawtv
- remote = *
- button = VOL_DOWN
- config = volume dec
- end
- begin
- prog = xawtv
- remote = *
- button = MUTE
- config = volume mute
- end
- begin
- prog = xawtv
- remote = *
- button = FULLSCREEN
- config = fullscreen toggle
- flags = once
- end
- begin
- prog = xawtv
- remote = *
- button = PLAYLIST
- config = setinput next
- end
- begin
- prog = xawtv
- remote = *
- button = EXIT
- config = quit
- flags = once
- end
- begin
- prog = xawtv
- remote = *
- button = ARROW_UP
- config = keypad 1
- end
- begin
- prog = xawtv
- remote = *
- button = ARROW_UP
- config = keypad 2
- end
- begin
- prog = xawtv
- remote = *
- button = PG_UP
- config = keypad 3
- end
- begin
- prog = xawtv
- remote = *
- button = ARROW_LEFT
- config = keypad 4
- end
- begin
- prog = xawtv
- remote = *
- button = ENTER
- config = keypad 5
- end
- begin
- prog = xawtv
- remote = *
- button = ARROW_RIGHT
- config = keypad 6
- end
- begin
- prog = xawtv
- remote = *
- button = END
- config = keypad 7
- end
- begin
- prog = xawtv
- remote = *
- button = ARROW_DOWN
- config = keypad 8
- end
- begin
- prog = xawtv
- remote = *
- button = PG_DN
- config = keypad 9
- end
- begin
- prog = xawtv
- remote = *
- button = SPACE
- config = keypad 0
- end
-end xawtv
-#####################################################################
-#
-# Xpdf
-#
-#####################################################################
-begin xpdf
- begin
- prog = irxevent
- remote = *
- button = LOAD
- config = Key o xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = PREV
- config = Key p xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = NEXT
- config = Key n xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = SKIP_BACK
- config = Key BackSpace xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = SKIP_FORW
- config = Key space xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = ZOOM-
- config = Key minus xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = ZOOM+
- config = Key KP_Add xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = sPREV
- config = Key z xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = sNEXT
- config = Key w xpdf
- end
- begin
- prog = irxevent
- remote = *
- button = EXIT
- config = Key q xpdf
- end
-end xpdf
-#####################################################################
-#
-# FREEVO
-# In freevo_config.py variable LIRCRC have to show this file
-# eg. LIRCRC = '/home/john/.lircrc'
-#####################################################################
-begin freevo
- begin
- prog = irexec
- remote = *
- button = POWER
- config = freevo stop
- end
- begin
- prog = freevo
- remote = *
- button = PLAYLIST
- config = DISPLAY
- end
- begin
- prog = freevo
- remote = *
- button = sPLAYLIST
- config = SUBTITLE
- end
- begin
- prog = freevo
- remote = *
- button = BUTTONR_DOWN
- config = EXIT
- end
- begin
- prog = freevo
- remote = *
- button = MOUSE_N
- config = UP
- end
- begin
- prog = freevo
- remote = *
- button = MOUSE_S
- config = DOWN
- end
- begin
- prog = freevo
- remote = *
- button = MOUSE_W
- config = LEFT
- end
- begin
- prog = freevo
- remote = *
- button = MOUSE_E
- config = RIGHT
- end
- begin
- prog = freevo
- remote = *
- button = BUTTONL_DOWN
- config = SELECT
- end
- begin
- prog = freevo
- remote = *
- button = FULLSCREEN
- config = SELECT
- end
- begin
- prog = freevo
- remote = *
- button = MUTE
- config = MUTE
- end
- begin
- prog = freevo
- remote = *
- button = VOL_UP
- config = VOL+
- end
- begin
- prog = freevo
- remote = *
- button = VOL_DOWN
- config = VOL-
- end
- begin
- prog = freevo
- remote = *
- button = NEXT
- config = CH+
- end
- begin
- prog = freevo
- remote = *
- button = PREV
- config = CH-
- end
- begin
- prog = freevo
- remote = *
- button = sPREV
- config = PREV_CH
- end
- begin
- prog = freevo
- button = sNEXT
- config = NEXT_CH
- end
- begin
- prog = freevo
- button = SKIP_BACK
- config = REW
- end
- begin
- prog = freevo
- button = SKIP_FORW
- config = FFWD
- end
- begin
- prog = freevo
- remote = *
- button = PLAY
- config = PLAY
- end
- begin
- prog = freevo
- remote = *
- button = PAUSE
- config = PAUSE
- end
- begin
- prog = freevo
- remote = *
- button = STOP
- config = STOP
- end
- begin
- prog = freevo
- remote = *
- button = sPLAY
- config = REC
- end
- begin
- prog = freevo
- remote = *
- button = HELP
- repeat = 10
- config = EJECT
- end
- begin
- prog = freevo
- remote = *
- button = HOME
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ARROW_UP
- config =
- end
- begin
- prog = freevo
- remote = *
- button = PG_UP
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ARROW_LEFT
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ENTER
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ARROW_RIGHT
- config =
- end
- begin
- prog = freevo
- remote = *
- button = END
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ARROW_DOWN
- config =
- end
- begin
- prog = freevo
- remote = *
- button = PG_DN
- config =
- end
- begin
- prog = freevo
- remote = *
- button = SPACE
- config =
- end
- begin
- prog = freevo
- remote = *
- button = TAB
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ESC
- config =
- end
- begin
- prog = freevo
- remote = *
- button = ALT
- config =
- end
-end freevo
-#####################################################################
-#
-# Wybor aplikacji
-#
-#####################################################################
-begin
- prog = irexec
- button = A
- config = xmms&
- mode = xmms
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- button = B
- config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi
- mode = mplayer
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- button = C
- config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi
- mode = gqview
-end
-begin
- prog = none
- button = D
- mode = linux
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- remote = *
- button = E
- config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi
- mode = xine
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- button = F
- config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi
- mode = xawtv
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- button = G
- config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi
- mode = xpdf
-end
-#tag:Uruchom program tylko raz!!
-begin
- prog = irexec
- remote = *
- button = H
- config = freevo&
- mode = freevo
-end
-#####################################################################
-#
-# Klawisze Globalne
-#
-#####################################################################
-begin
- prog = irxevent
- button = HOME
- config = Key Home CurrentWindow
-end
-begin
- prog = irxevent
- button = ARROW_UP
- repeat = 5
- config = Key Up CurrentWindow
-end
-begin
- prog = irxevent
- button = PG_UP
- repeat = 5
- config = Key Page_Up CurrentWindow
-end
-begin
- prog = irxevent
- button = ARROW_LEFT
- repeat = 5
- config = Key Left CurrentWindow
-end
-begin
- prog = irxevent
- button = ENTER
- config = Key Return CurrentWindow
-end
-begin
- prog = irxevent
- button = ARROW_RIGHT
- repeat = 5
- config = Key Right CurrentWindow
-end
-begin
- prog = irxevent
- button = END
- config = Key End CurrentWindow
-end
-begin
- prog = irxevent
- button = ARROW_DOWN
- repeat = 5
- config = Key Down CurrentWindow
-end
-begin
- prog = irxevent
- button = PG_DN
- repeat = 5
- config = Key Page_Down CurrentWindow
-end
-begin
- prog = irxevent
- button = TAB
- config = Key Tab CurrentWindow
-end
-begin
- prog = irxevent
- remote = *
- button = sTAB
- config = Key shift-Tab CurrentWindow
-end
-begin
- prog = irxevent
- button = SPACE
- config = Key space CurrentWindow
-end
-begin
- prog = irxevent
- button = ESC
- config = Key Escape CurrentWindow
-end
-begin
- prog = irxevent
- button = ALT
- config = Key UP CurrentWindow
-end
-begin
- prog = irxevent
- button = 1
- config = Key 1 CurrentWindow
-end
-begin
- prog = irxevent
- button = 2
- config = Key 2 CurrentWindow
-end
-begin
- prog = irxevent
- button = 3
- config = Key 3 CurrentWindow
-end
-begin
- prog = irxevent
- remote = *
- button = 4
- config = Key 4 CurrentWindow
-end
-begin
- prog = irxevent
- button = 5
- config = Key 5 CurrentWindow
-end
-begin
- prog = irxevent
- button = 6
- config = Key 6 CurrentWindow
-end
-begin
- prog = irxevent
- button = 7
- config = Key 7 CurrentWindow
-end
-begin
- prog = irxevent
- button = 8
- config = Key 8 CurrentWindow
-end
-begin
- prog = irxevent
- button = 9
- config = Key 9 CurrentWindow
-end
-begin
- prog = irxevent
- button = 0
- config = Key 0 CurrentWindow
-end
diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg b/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg
deleted file mode 100644
index d2ccdd1..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv
deleted file mode 100644
index 4783e06..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv
+++ /dev/null
@@ -1,94 +0,0 @@
-#
-# contributed by Bart Alewijnse <scarfboy@yahoo.com>
-#
-# brand: Pinnacle Systems
-# model: PCTV Remote (Perhaps other ones as well)
-# supported devices: there's only one I know of. (serial)
-#
-# Mail me if your remote is only partly supported, or if it has different
-# buttons than listed below.
-#
-
-begin remote
-
- name PinnacleSysPCTVRemote
- bits 8
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- gap 180000
-
- begin codes
- Mute 0x000000000000003C
- Power 0x000000000000002F
- Chan+Play 0x000000000000003F
- Chan-Stop 0x000000000000003E
- Vol+FF 0x000000000000003B
- Vol-Rew 0x000000000000003D
- 1 0x0000000000000031
- 2 0x0000000000000032
- 3 0x0000000000000033
- 4 0x0000000000000034
- 5 0x0000000000000035
- 6 0x0000000000000036
- 7 0x0000000000000037
- 8 0x0000000000000038
- 9 0x0000000000000039
- Fullscreen 0x000000000000002D
- 0/AV 0x000000000000003A
- Info 0x000000000000002B
- Preview 0x000000000000002E
- Record 0x0000000000000027
- Chan_Last 0x0000000000000025
- F_TV 0x0000000000000026
- F_TELETEXT 0x0000000000000029
- F_RADIO 0x000000000000002A
-
-#
-# here are some extra buttons a new version of the remote seems to have
-#
-# contributed by Robbert Monna <rjmonna@kabelfoon.nl>
-#
-# brand: Pinnacle Systems
-# model: PCTV Remote (newest version?)
-# supported devices: dongle on serial port (from TV-Card)
-#
- L 0x000000000000001F
- Zoom 0x000000000000001E
- vol+ 0x000000000000001B
- vol- 0x000000000000000F
- channel+ 0x0000000000000017
- channel- 0x000000000000001C
- middle 0x000000000000001A
- Menu 0x000000000000001D
- next 0x0000000000000019
- undo 0x0000000000000016
- pause 0x0000000000000015
- redo 0x0000000000000013
- Rewind 0x000000000000000E
- Play 0x000000000000000D
- Stop 0x000000000000000B
- FForward 0x0000000000000007
- EPG 0x0000000000000018
-
-# here are some more buttons that seem to be mapped differently from
-# the ones above
-
-# contributed by InterCeptor ceptor_7@freemail.hu
-#
-# brand: Pinnacle Systems PCTV Pro Remote
-# model no. of remote control: (I can't find any numbers on it)
-# supported devices: serial
-#
-
- 9 0x0000000000000082
- Zoom 0x00000000000000B2
- middle 0x0000000000000014
-
-
- end codes
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv
deleted file mode 100644
index 064ee57..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# contributed by Nathan Hand <nathanh@chirp.com.au>
-#
-# brand: Pixelview
-# model:
-# supported devices: Pixelview PlayTV PRO
-#
-
-begin remote
- name Pixelview
- bits 8
-
- begin codes
- TV/FM 0x00000000000000e7
- FULL_SCREEN 0x00000000000000bf
- CH+ 0x0000000000000049
- CH- 0x00000000000000c1
- VOL- 0x000000000000006a
- VOL+ 0x000000000000004a
- MUTE 0x0000000000000047
- SOURCE 0x00000000000000e1
- 1 0x00000000000000e0
- 2 0x00000000000000c8
- 3 0x00000000000000e8
- 4 0x0000000000000060
- 5 0x0000000000000062
- 6 0x00000000000000c9
- 7 0x00000000000000c0
- 8 0x00000000000000c2
- 9 0x0000000000000061
- 0 0x0000000000000040
- end codes
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878
deleted file mode 100644
index f017a3b..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# contributed by Michal Kochanowicz <mkochano@pld.org.pl>
-# based on file contributred by Nathan Hand <nathanh@chirp.com.au>
-#
-# brand: PixelView
-# model: BT878+W/FM
-# supported devices: PixelView BT878+W/FM
-#
-
-begin remote
- name PixelView
- bits 8
-# repeat_bit 2
- repeat 9080 2189
- gap 108056
- repeat_bit 0
-
- begin codes
- POWER 0x00000000000000aa
- TV/FM 0x00000000000000e7
- TELETEXT 0x000000000000003f
- SCAN 0x0000000000000041
- +/- 0x0000000000000069
- EJECT 0x000000000000002a
- STOP 0x000000000000008a
- SOURCE 0x00000000000000e1
- STEREO 0x00000000000000df
- ENTER 0x000000000000005f
- SEEK_NEXT 0x0000000000000067
- SEEK_FWD 0x00000000000000c7
- CH_UP 0x0000000000000049
- VOL_UP 0x000000000000004a
- RECALL 0x0000000000000048
- PAUSE 0x0000000000000068
- PLAY 0x00000000000000ca
- CH_DOWN 0x00000000000000c1
- VOL_DOWN 0x000000000000006a
- SEEK_PREV 0x000000000000000a
- SEEK_BACK 0x0000000000000042
- ZOOM 0x00000000000000bf
- MUTE 0x0000000000000047
- 1 0x00000000000000e0
- 2 0x00000000000000c8
- 3 0x00000000000000e8
- 4 0x0000000000000060
- 5 0x0000000000000062
- 6 0x00000000000000c9
- 7 0x00000000000000c0
- 8 0x00000000000000c2
- 9 0x0000000000000061
- 0 0x0000000000000040
- end codes
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro
deleted file mode 100644
index 84e84a9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro
+++ /dev/null
@@ -1,159 +0,0 @@
-#
-# brand: PixelView
-# model: PlayTV Pro remote control
-#
-# supported devices:
-# works both with home-brew and TV card receiver (use lirc-0.6.6 or better)
-#
-
-
-begin remote
-
- name pixelviewp
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 20
- aeps 200
-
- pre_data_bits 16
- pre_data 0x61d6
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- repeat 9000 2250
- gap 108000
- toggle_bit 0
-
- frequency 38000
- duty_cycle 33
-
- begin codes
-
- power 0x0000000000007887
- zoom 0x00000000000038C7
- scan 0x000000000000E01F
- tv/fm 0x000000000000C03F
- vol+ 0x000000000000F807
- vol- 0x000000000000E817
- chan+ 0x0000000000006897
- chan- 0x00000000000028D7
- mute 0x00000000000018E7
- source 0x00000000000000FF
- loop 0x000000000000C837
- +100 0x00000000000008F7
- fn- 0x00000000000020DF
- fn+ 0x00000000000030CF
- reset 0x000000000000B04F
- freeze 0x000000000000F00F
- function 0x000000000000708F
- 0 0x00000000000040BF
- 1 0x000000000000807F
- 2 0x000000000000D02F
- 3 0x000000000000D827
- 4 0x000000000000A05F
- 5 0x000000000000906F
- 6 0x000000000000A857
- 7 0x000000000000609F
- 8 0x00000000000050AF
- 9 0x00000000000048B7
-
- end codes
-
-end remote
-
-
-# This config file was automatically generated
-# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005
-#
-# contributed by Thadeu A. Coelho de Paula
-# thadeudepaula (at) gmail (dot) com
-# http://mundolivre.hostrix.com.br
-#
-# brand: PixelView
-# model: PlayTV MPEG2 (M4900)
-#
-# supported devices:
-# This TV Card
-
-
-begin remote
-
- name PixelView_PlayTV_MPEG2
- bits 16
- eps 30
- aeps 100
-
- pre_data_bits 16
- pre_data 0x61D6
-
- header 9000 4500
- one 563 1687
- zero 563 562
- ptrail 563
- repeat 9000 2250
- gap 108000
- toggle_bit 0
-
- frequency 38000
- duty_cycle 33
-
-
-
- begin codes
- timeshift 0xC03F
- power 0x7887
- 1 0x807F
- 2 0xD02F
- 3 0xD827
- 4 0xA05F
- 5 0x906F
- 6 0xA857
- 7 0x609F
- 8 0x50AF
- 9 0x48B7
- 0 0x40BF
- loop 0xC837
- +100 0x08F7
- source 0x00FF
- mute 0x18E7
- ch+ 0x6897
- ch- 0x28D7
- vol+ 0xF807
- vol- 0xE817
- zoom 0x38C7
- snapshot 0x9867
- scan 0x58A7
- bw 0x20DF
- rec 0x708F
- fw 0x30CF
- stop 0xB847
- play 0x10EF
- pause 0xF00F
- tv 0xB04F
- fm 0xE01F
- end codes
-
-end remote
-
-# CONTROL LAYOUT:
-#
-# TIMESHIFT POWER
-#
-# 1 2 3
-# 4 5 6
-# 7 8 9
-# LOOP 0 SCAN
-# SOURCE MUTE
-#
-# CH+
-# VOL- ZOOM VOL+
-# CH-
-#
-# SNAPSHOT SCAN
-#
-# BW REC FW
-# STOP PLAY PAUSE
-#
-# TV FM
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster
deleted file mode 100644
index 1b75e42..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster
+++ /dev/null
@@ -1,117 +0,0 @@
-# this config file was MANUALLY generated
-# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000
-#
-# contributed by Petre Rodan <rodan@subdimension.com>
-#
-# brand: PixelView
-# model: RemoteMaster 2000
-# supported devices: ComboTV series
-# receiver type: /dev/ttySx
-# video card: PixelView bttv848 pll=1 type=5
-#
-
-begin remote
-
- name RemoteMaster_2000_12b
- bits 20
- flags SPACE_ENC
- eps 30
- aeps 100
-
- one 0 833
- zero 833 0
- pre_data_bits 10
- pre_data 0x12B
- gap 189264
-
- begin codes
- 1 0x0000000000052D2F
- 2 0x0000000000052CCF
- 3 0x0000000000052CAF
- 4 0x0000000000052D37
- 5 0x0000000000052CDF
- 6 0x000000000005359F
- 7 0x0000000000052D4F
- 8 0x0000000000052D3F
- 9 0x00000000000534DF
- 0 0x0000000000052D57
- ENTER 0x0000000000052CD7
- +10 0x0000000000053537
- POWER 0x0000000000054D5F
- MODE 0x00000000000534AF
- TAB 0x0000000000053557
- ZOOM 0x000000000005355F
- FREEZE 0x000000000005356F
- SEEK-- 0x0000000000054DAF
- PAUSE 0x0000000000052CB7
- SEEK++ 0x00000000000534B7
- SEEK- 0x0000000000052D5F
- PLAY 0x0000000000052D9F
- SEEK+ 0x00000000000534CF
- STOP 0x0000000000054D9F
- EJECT 0x0000000000054D6F
- F1 0x000000000005354F
- F2 0x00000000000534D7
- F3 0x00000000000534BF
- F4 0x000000000005352F
- CH- 0x000000000005353F
- CH+ 0x00000000000535AF
- VOL- 0x0000000000052D6F
- VOL+ 0x0000000000052DAF
- end codes
-
-end remote
-
-begin remote
-
- name RemoteMaster_2000_14b
- bits 20
- flags SPACE_ENC
- eps 30
- aeps 100
-
- one 0 833
- zero 833 0
- pre_data_bits 10
- pre_data 0x14B
- gap 189264
-
- begin codes
- 1 0x0000000000052D2F
- 2 0x0000000000052CCF
- 3 0x0000000000052CAF
- 4 0x0000000000052D37
- 5 0x0000000000052CDF
- 6 0x000000000005359F
- 7 0x0000000000052D4F
- 8 0x0000000000052D3F
- 9 0x00000000000534DF
- 0 0x0000000000052D57
- ENTER 0x0000000000052CD7
- +10 0x0000000000053537
- POWER 0x0000000000054D5F
- MODE 0x00000000000534AF
- TAB 0x0000000000053557
- ZOOM 0x000000000005355F
- FREEZE 0x000000000005356F
- SEEK-- 0x0000000000054DAF
- PAUSE 0x0000000000052CB7
- SEEK++ 0x00000000000534B7
- SEEK- 0x0000000000052D5F
- PLAY 0x0000000000052D9F
- SEEK+ 0x00000000000534CF
- STOP 0x0000000000054D9F
- EJECT 0x0000000000054D6F
- F1 0x000000000005354F
- F2 0x00000000000534D7
- F3 0x00000000000534BF
- F4 0x000000000005352F
- CH- 0x000000000005353F
- CH+ 0x00000000000535AF
- VOL- 0x0000000000052D6F
- VOL+ 0x0000000000052DAF
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro
deleted file mode 100644
index e277fe6..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro
+++ /dev/null
@@ -1,29 +0,0 @@
-# lircmd.conf file to be used with PixeView PlayTV pro
-#
-# lircmd config file
-#
-
-#PROTOCOL IntelliMouse
-
-ACCELERATOR 2 20 5
-
-ACTIVATE * +100
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_S * 8
-
-BUTTON1_TOGGLE * tv/fm
-BUTTON2_TOGGLE * scan
-BUTTON3_TOGGLE * zoom
-
-BUTTON1_CLICK * 0
-BUTTON2_CLICK * loop
-BUTTON3_CLICK * source
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster
deleted file mode 100644
index 07d2547..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster
+++ /dev/null
@@ -1,31 +0,0 @@
-# lircmd.conf file to be used with RemoteMaster 2000
-#
-# lircmd config file
-#
-
-# ACCELERATOR start max multiplier
-
-#PROTOCOL IntelliMouse
-
-ACCELERATOR 2 20 5
-
-ACTIVATE * ENTER
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-MOVE_S * 8
-
-BUTTON1_TOGGLE * +10
-BUTTON2_TOGGLE * FREEZE
-#BUTTON3_TOGGLE * LIST
-
-BUTTON1_CLICK * 5
-BUTTON2_CLICK * 0
-#BUTTON3_CLICK * POWER
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro
deleted file mode 100644
index 4e495c8..0000000
--- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# This is an example of ~/.lircrc file
-# It is a copy of actual setup from my home machine.
-# Contributed by Artur Lipowski <alipowski@interia.pl>
-#
- begin
- prog = irexec
- button = power
- config = xawtv-remote quit
- flags = mode
- end
- begin
- prog = irexec
- button = source
- repeat = 1
- config = xawtv-remote setinput next
- end
- begin
- prog = irexec
- button = zoom
- repeat = 1
- config = xawtv-remote fullscreen
- end
- begin
- prog = irexec
- button = chan-
- repeat = 1
- config = xawtv-remote setstation prev
- end
- begin
- prog = irexec
- button = chan+
- repeat = 1
- config = xawtv-remote setstation next
- end
- begin
- prog = irxevent
- button = loop
- repeat = 1
- config = Key c xawtv
- end
- begin
- prog = irxevent
- button = scan
- repeat = 1
- config = Key ctrl-z xawtv
- end
- begin
- prog = irxevent
- button = mute
- config = Key a xawtv
- end
- begin
- prog = irxevent
- button = vol+
- repeat = 1
- config = Key KP_Add xawtv
- end
- begin
- prog = irxevent
- button = vol-
- repeat = 1
- config = Key KP_Subtract xawtv
- end
- begin
- prog = irexec
- button = 1
- config = xawtv-remote setstation 0
- end
- begin
- prog = irexec
- button = 2
- config = xawtv-remote setstation 1
- end
- begin
- prog = irexec
- button = 3
- config = xawtv-remote setstation 2
- end
- begin
- prog = irexec
- button = 4
- config = xawtv-remote setstation 3
- end
- begin
- prog = irexec
- button = 5
- config = xawtv-remote setstation 4
- end
- begin
- prog = irexec
- button = 6
- config = xawtv-remote setstation 5
- end
- begin
- prog = irexec
- button = 7
- config = xawtv-remote setstation 6
- end
- begin
- prog = irexec
- button = 8
- config = xawtv-remote setstation 7
- end
- begin
- prog = irexec
- button = 9
- config = xawtv-remote setstation 8
- end
- begin
- prog = irexec
- button = 0
- config = xawtv-remote setstation 0
- end
- begin
- prog = irexec
- button = function
- config = xawtv-remote attr next
- end
- begin
- prog = irexec
- button = fn+
- config = xawtv-remote attr inc
- end
- begin
- prog = irexec
- button = fn-
- config = xawtv-remote attr dec
- end
- begin
- prog = irexec
- button = +100
- config = xawtv-remote msg " `date +%H:%M` "
- end
diff --git a/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951
deleted file mode 100644
index e488424..0000000
--- a/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.1 on Wed May 24 23:10:08 2000
-#
-# contributed by BartOwl <bartowl@dione.ids.pl>
-#
-# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/
-# model: PV951 (http://www.jsir.com/pv951.htm)
-# supported devices: Remote control for this TV-capture card
-#
-# The manufacturer seems to be ProVideo: http://www.provideo.com.tw
-# Funny: they have Linux "drivers" for this card...
-#
-
-begin remote
-
- name PV951
- bits 16
- flags SPACE_ENC|CONST_LENGTH
- eps 30
- aeps 100
-
- header 9067 4482
- one 597 1650
- zero 597 529
- ptrail 584
- repeat 9068 2232
- pre_data_bits 16
- pre_data 0x61D6
- gap 107983
- repeat_bit 0
-
- begin codes
- power 0x00000000000048B7
- air/cbl 0x000000000000D02F
- pc/tv 0x0000000000008877
- source 0x000000000000F00F
- mts 0x000000000000C837
- mute 0x00000000000008F7
- 1 0x000000000000807F
- 2 0x00000000000040BF
- 3 0x000000000000C03F
- 4 0x00000000000020DF
- 5 0x000000000000A05F
- 6 0x000000000000609F
- 7 0x000000000000E01F
- 8 0x00000000000010EF
- 9 0x000000000000906F
- 0 0x00000000000000FF
- +100 0x00000000000050AF
- ch_rtn 0x000000000000E817
- ch+ 0x00000000000058A7
- ch- 0x0000000000007887
- vol+ 0x000000000000D827
- vol- 0x000000000000F807
- func 0x0000000000009867
- ttx 0x000000000000B04F
- pg+ 0x000000000000708F
- pg- 0x000000000000B847
- cc 0x0000000000006897
- sync 0x00000000000028D7
- ch+- 0x00000000000018E7
- autoscan 0x00000000000030CF
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/receiver_usb.id b/abs/core-testing/live-installer/templates/remotes/receiver_usb.id
deleted file mode 100644
index a830b11..0000000
--- a/abs/core-testing/live-installer/templates/remotes/receiver_usb.id
+++ /dev/null
@@ -1,33 +0,0 @@
-0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc."
-0bc7:0008|SnapStream_Firefly| "SnapStream Firefly"
-10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver"
-0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder"
-0e9c:0000|streamzap| "Streamzap Remote"
-0fe9:9010|Dvico| "DVICO Remote:"
-6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone "
-1509:9242|MCEUSB-new| "FIC eHome Infrared Transceiver 1509/9242"
-1934:0602|MCEUSB-new| "Fintek eHome Infrared Transceiver 1934/0602"
-147a:e015|MCEUSB-new| "Formosa eHome Infrared Transceiver 147a/e015"
-147a:e017|MCEUSB-new| "Formosa aim / Trust MCE Infrared Receiver147a/e017"
-147a:e018|MCEUSB-new| "Formosa Industrial Computing 147a/e018"
-107b:3009|MCEUSB-new| "Gateway eHome Infrared Transceiver 107b/3009"
-195d:7002|MCEUSB-new| "Itron ione Libra Q-11 195d/7002"
-043e:9803|MCEUSB-new| "LG eHome Infrared Transceiver 043e/9803"
-045e:00a0|MCEUSB-new| "Microsoft MCE Infrared Transceiver 045e/00a0"
-03ee:2501|MCEUSB-new| "Mitsumi 03ee/2501"
-0471:060c|MCEUSB-new| "Philips Infrared Transciever - HP branded 0471/060C"
-0471:060d|MCEUSB-new| "Philips SRM5100 0471/060d"
-0471:0815|MCEUSB-new| "Philips eHome Infrared Transciever 0471/0815"
-2304:0225|MCEUSB-new| "Pinnacle Systems, Inc. 2304/0225"
-179d:0010|MCEUSB-new| "Ricavision internal Infrared Transceiver 179d/0010"
-1308:c001|MCEUSB-new| "Shuttle eHome Infrared Transceiver 1308/c001"
-051c:c001|MCEUSB-new| "Shuttle2 eHome Infrared Transceiver 051c/c001"
-0609:031d|MCEUSB-new| "SMK/Toshiba G83C0004D410 0609/031d"
-0609:0322|MCEUSB-new| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322"
-0609:0334|MCEUSB-new| "SKM bundled with Hauppauge PVR-150 0609/0334"
-1460:9150|MCEUSB-new| "Tatung eHome Infrared Transceiver 1460/9150"
-1784:0001|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0001"
-1784:0006|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0006"
-1784:0007|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0007"
-1784:0008|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0008"
-045e:006d|MCEUSB-old| "USB Microsoft IR Transceiver Driver 045e/006d"
diff --git a/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130
deleted file mode 100644
index 1797647..0000000
--- a/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# brand: Remotec
-# model no. of remote control: BW 6130 Multimedia Master Receiver
-# devices being controlled by this remote:
-#
-
-begin remote
-
- name MEDIAMASTER
- bits 32
- eps 0
- aeps 0
-
- one 0 0
- zero 0 0
- pre_data_bits 32
- pre_data 0xFFA10003
- gap 131980
- post_data_bits 0
- toggle_bit 0
-
- begin codes
- PRE 0x23
- NEXT 0x24
- 1 0X10
- 2 0x11
- 3 0x12
- POWER 0x50
- VOL+ 0x30
- VOL- 0x31
- L 0x42
- R 0x44
- PAUSE 0x22
- PLAY 0x20
- STOP 0x21
- MUTE 0x32
- MOUSE_SLOW_N 0x95
- MOUSE_SLOW_NNE 0xd1
- MOUSE_SLOW_NE 0xcd
- MOUSE_SLOW_ENE 0xc9
- MOUSE_SLOW_E 0xc5
- MOUSE_SLOW_ESE 0xe9
- MOUSE_SLOW_SE 0xed
- MOUSE_SLOW_SSE 0xf1
- MOUSE_SLOW_S 0xb5
- MOUSE_SLOW_SSW 0xb1
- MOUSE_SLOW_SW 0xad
- MOUSE_SLOW_WSW 0xa9
- MOUSE_SLOW_W 0x85
- MOUSE_SLOW_WNW 0x89
- MOUSE_SLOW_NW 0x8d
- MOUSE_SLOW_NNW 0x91
- MOUSE_MEDIUM_N 0x96
- MOUSE_MEDIUM_NNE 0xd2
- MOUSE_MEDIUM_NE 0xce
- MOUSE_MEDIUM_ENE 0xca
- MOUSE_MEDIUM_E 0xc6
- MOUSE_MEDIUM_ESE 0xea
- MOUSE_MEDIUM_SE 0xee
- MOUSE_MEDIUM_SSE 0xf2
- MOUSE_MEDIUM_S 0xb6
- MOUSE_MEDIUM_SSW 0xb2
- MOUSE_MEDIUM_SW 0xae
- MOUSE_MEDIUM_WSW 0xaa
- MOUSE_MEDIUM_W 0x86
- MOUSE_MEDIUM_WNW 0x8a
- MOUSE_MEDIUM_NW 0x8e
- MOUSE_MEDIUM_NNW 0x92
- MOUSE_FAST_N 0x97
- MOUSE_FAST_NNE 0xd3
- MOUSE_FAST_NE 0xcf
- MOUSE_FAST_ENE 0xcb
- MOUSE_FAST_E 0xc7
- MOUSE_FAST_ESE 0xeb
- MOUSE_FAST_SE 0xef
- MOUSE_FAST_SSE 0xf3
- MOUSE_FAST_S 0xb7
- MOUSE_FAST_SSW 0xb3
- MOUSE_FAST_SW 0xaf
- MOUSE_FAST_WSW 0xab
- MOUSE_FAST_W 0x87
- MOUSE_FAST_WNW 0x8b
- MOUSE_FAST_NW 0x8f
- MOUSE_FAST_NNW 0x93
- end codes
-
-end remote
-
diff --git a/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130
deleted file mode 100644
index f056530..0000000
--- a/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130
+++ /dev/null
@@ -1,291 +0,0 @@
-#
-# lircmd config file
-# simply copied/edited x10/mouseremote lircmd file
-#
-
-PROTOCOL IntelliMouse
-#PROTOCOL MouseSystems
-
-# ACCELERATOR start max multiplier
-
-TOGGLE_ACTIVATE MEDIAMASTER 3
-
-ACCELERATOR 1 3 2
-
-
-MOVE_N MEDIAMASTER MOUSE_SLOW_N
-MOVE_N MEDIAMASTER MOUSE_SLOW_N
-
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_N
-
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-MOVE_N MEDIAMASTER MOUSE_FAST_N
-
-MOVE_N MEDIAMASTER MOUSE_SLOW_NNE
-MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE
-
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE
-
-MOVE_N MEDIAMASTER MOUSE_FAST_NNE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
-MOVE_N MEDIAMASTER MOUSE_FAST_NNE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
-MOVE_N MEDIAMASTER MOUSE_FAST_NNE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
-MOVE_N MEDIAMASTER MOUSE_FAST_NNE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NNE
-
-MOVE_NE MEDIAMASTER MOUSE_SLOW_NE
-MOVE_NE MEDIAMASTER MOUSE_SLOW_NE
-
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE
-
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-MOVE_NE MEDIAMASTER MOUSE_FAST_NE
-
-MOVE_E MEDIAMASTER MOUSE_SLOW_ENE
-MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE
-
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE
-MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE
-
-MOVE_E MEDIAMASTER MOUSE_FAST_ENE
-MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
-MOVE_E MEDIAMASTER MOUSE_FAST_ENE
-MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
-MOVE_E MEDIAMASTER MOUSE_FAST_ENE
-MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
-MOVE_E MEDIAMASTER MOUSE_FAST_ENE
-MOVE_NE MEDIAMASTER MOUSE_FAST_ENE
-
-MOVE_E MEDIAMASTER MOUSE_SLOW_E
-MOVE_E MEDIAMASTER MOUSE_SLOW_E
-
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_E
-
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-MOVE_E MEDIAMASTER MOUSE_FAST_E
-
-MOVE_E MEDIAMASTER MOUSE_SLOW_ESE
-MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE
-
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE
-MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE
-
-MOVE_E MEDIAMASTER MOUSE_FAST_ESE
-MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
-MOVE_E MEDIAMASTER MOUSE_FAST_ESE
-MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
-MOVE_E MEDIAMASTER MOUSE_FAST_ESE
-MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
-MOVE_E MEDIAMASTER MOUSE_FAST_ESE
-MOVE_SE MEDIAMASTER MOUSE_FAST_ESE
-
-MOVE_SE MEDIAMASTER MOUSE_SLOW_SE
-MOVE_SE MEDIAMASTER MOUSE_SLOW_SE
-
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE
-
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SE
-
-MOVE_S MEDIAMASTER MOUSE_SLOW_SSE
-MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE
-
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE
-MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE
-
-MOVE_S MEDIAMASTER MOUSE_FAST_SSE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
-MOVE_S MEDIAMASTER MOUSE_FAST_SSE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
-MOVE_S MEDIAMASTER MOUSE_FAST_SSE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
-MOVE_S MEDIAMASTER MOUSE_FAST_SSE
-MOVE_SE MEDIAMASTER MOUSE_FAST_SSE
-
-MOVE_S MEDIAMASTER MOUSE_SLOW_S
-MOVE_S MEDIAMASTER MOUSE_SLOW_S
-
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_S
-
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-MOVE_S MEDIAMASTER MOUSE_FAST_S
-
-MOVE_S MEDIAMASTER MOUSE_SLOW_SSW
-MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW
-
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW
-MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW
-
-MOVE_S MEDIAMASTER MOUSE_FAST_SSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
-MOVE_S MEDIAMASTER MOUSE_FAST_SSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
-MOVE_S MEDIAMASTER MOUSE_FAST_SSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
-MOVE_S MEDIAMASTER MOUSE_FAST_SSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SSW
-
-MOVE_SW MEDIAMASTER MOUSE_SLOW_SW
-MOVE_SW MEDIAMASTER MOUSE_SLOW_SW
-
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW
-
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-MOVE_SW MEDIAMASTER MOUSE_FAST_SW
-
-MOVE_W MEDIAMASTER MOUSE_SLOW_WSW
-MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW
-
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW
-MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW
-
-MOVE_W MEDIAMASTER MOUSE_FAST_WSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
-MOVE_W MEDIAMASTER MOUSE_FAST_WSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
-MOVE_W MEDIAMASTER MOUSE_FAST_WSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
-MOVE_W MEDIAMASTER MOUSE_FAST_WSW
-MOVE_SW MEDIAMASTER MOUSE_FAST_WSW
-
-MOVE_W MEDIAMASTER MOUSE_SLOW_W
-MOVE_W MEDIAMASTER MOUSE_SLOW_W
-
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_W
-
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-MOVE_W MEDIAMASTER MOUSE_FAST_W
-
-MOVE_W MEDIAMASTER MOUSE_SLOW_WNW
-MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW
-
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW
-MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW
-
-MOVE_W MEDIAMASTER MOUSE_FAST_WNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
-MOVE_W MEDIAMASTER MOUSE_FAST_WNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
-MOVE_W MEDIAMASTER MOUSE_FAST_WNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
-MOVE_W MEDIAMASTER MOUSE_FAST_WNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_WNW
-
-MOVE_NW MEDIAMASTER MOUSE_SLOW_NW
-MOVE_NW MEDIAMASTER MOUSE_SLOW_NW
-
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW
-
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NW
-
-MOVE_N MEDIAMASTER MOUSE_SLOW_NNW
-MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW
-
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW
-MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW
-MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW
-
-MOVE_N MEDIAMASTER MOUSE_FAST_NNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
-MOVE_N MEDIAMASTER MOUSE_FAST_NNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
-MOVE_N MEDIAMASTER MOUSE_FAST_NNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
-MOVE_N MEDIAMASTER MOUSE_FAST_NNW
-MOVE_NW MEDIAMASTER MOUSE_FAST_NNW
-
-BUTTON1_CLICK MEDIAMASTER L
-BUTTON3_CLICK MEDIAMASTER R
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem
deleted file mode 100644
index da0fb82..0000000
--- a/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem
+++ /dev/null
@@ -1,81 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004
-#
-# contributed by Oliver Stabel (oliver.stabel@gmx.de)
-#
-# brand: Sasem OnAir
-# model no. of remote control: n/a
-# devices being controlled by this remote:
-# This IR came with the Dign HV5 HTPC case, manufactured
-# by Uneed in Korea (www.iuneed.com).
-# AFAIK the case is called Ahanix HV5 in the US.
-# The IR/VFD device is originally manufactured by Sasem,
-# and sold as OnAir Remocon-V (?looks different from
-# mine but should be the same?)
-#
-
-begin remote
-
- name lirc_sasem
- bits 16
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 24
- pre_data 0x0C807F
- post_data_bits 24
- post_data 0x000000
- gap 196000
- toggle_bit 0
-
-
- begin codes
- 1 0x08F7
- 2 0x09F6
- 3 0x0AF5
- 4 0x10EF
- 5 0x11EE
- 6 0x12ED
- 7 0x18E7
- 8 0x19E6
- 9 0x1AE5
- start 0x40BF
- 0 0x41BE
- full_down 0x06F9
- vol- 0x0FF0
- vol+ 0x0EF1
- esc 0x05FA
- up 0x0BF4
- close 0x07F8
- left 0x03FC
- enter 0x13EC
- right 0x1BE4
- prev 0x0CF3
- down 0x43BC
- next 0x01FE
- mute 0x0DF2
- step 0x04FB
- play_pause 0x49B6
- stop 0x48B7
- winamp 0x1EE1
- media_player 0x15EA
- hdtv 0x17E8
- cd_player 0x16E9
- win_dvd 0x44BB
- power_dvd 0x14EB
- internet 0x46B9
- email 0x47B8
- a 0x45BA
- b 0x1DE2
- c 0x1CE3
- d 0x1FE0
- eject 0x02FD
- power 0x00FF
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic
deleted file mode 100644
index 8aa4ef5..0000000
--- a/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic
+++ /dev/null
@@ -1,83 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000
-#
-# contributed by Stefan Neuwirth & Andreas Lange <langsmethanromp@gmx.de>
-#
-# brand: Sigma Designs
-# model: REALmagic remote control
-# www.realmagic.com/support.htm#remote
-# supported devices:
-# "For Hollywood Plus Version 1.4 or above Driver only"
-# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card
-# receiver is connected to the serial port - it does not require the card
-#
-# The first byte always is 131. The second and third byte are equal. (CB)
-#
-
-begin remote
-
- name REALmagic
- bits 20
- eps 30
- aeps 100
-
- one 0 0
- zero 0 0
- pre_data_bits 10
- pre_data 0x183
- gap 189974
- toggle_bit 0
-
-
- begin codes
- 1 0x0000000000062D8B
- 2 0x0000000000012C4B
- 3 0x000000000001AC6B
- 4 0x0000000000072DCB
- 5 0x000000000000AC2B
- 6 0x0000000000052D4B
-
-# Nicolas Vignal reported that this code is sent for his remote
-# version (1.5). It should be no problem to just have two entries for
-# "6" unless you want to send codes what won't work for this receiver
-# anyway.
-
- 6 0x0000000000041505
-
- 7 0x0000000000058561
- 8 0x0000000000044511
- 9 0x000000000004AD2B
- 0 0x000000000004C531
- VOL+ 0x0000000000022C8B
- VOL- 0x0000000000032CCB
- MUTE 0x000000000006ADAB
- L-R 0x0000000000052549
- VGA 0x0000000000054551
- ENTER 0x0000000000042509
- QUIT 0x0000000000058D63
- PRG 0x0000000000038CE3
- UP 0x0000000000078DE3
- DOWN 0x0000000000064D93
- LEFT 0x0000000000044D13
- RIGHT 0x000000000003ECFB
- SELECT 0x0000000000024C93
- MENU 0x0000000000014C53
- TITLE 0x0000000000054D53
- OSD 0x0000000000034CD3
- LANG 0x0000000000074DD3
- ANGLE 0x000000000000CC33
- SUB 0x000000000004CD33
- PAUSE 0x000000000002CCB3
- STOP 0x000000000006CDB3
- PLAY 0x000000000001CC73
- EJECT 0x000000000005CD73
- REV 0x000000000003CCF3
- FF 0x000000000007CDF3
- PREV 0x0000000000002C0B
- NEXT 0x0000000000042D0B
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek
deleted file mode 100644
index 090afb9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek
+++ /dev/null
@@ -1,97 +0,0 @@
-#
-#
-# contributed by Krister Wicksell <krister.wicksell@spray.se>
-#
-# brand: Silitek
-# model: SM-1000
-# supported devices:
-#
-
-begin remote
-
- name SILITEK_SM-1000
- bits 24
- repeat_bit 0
-
- begin codes
- MOUSE_E 0x0000000000aa0001
- MOUSE_NEE 0x0000000000aa0102
- MOUSE_NE 0x0000000000aa0103
- MOUSE_NNE 0x0000000000aa0104
- MOUSE_N 0x0000000000aa0105
- MOUSE_NNW 0x0000000000aa1104
- MOUSE_NW 0x0000000000aa1103
- MOUSE_NWW 0x0000000000aa1102
- MOUSE_W 0x0000000000aa1001
- MOUSE_SWW 0x0000000000aa1002
- MOUSE_SW 0x0000000000aa1003
- MOUSE_SSW 0x0000000000aa1004
- MOUSE_S 0x0000000000aa0005
- MOUSE_SSE 0x0000000000aa0004
- MOUSE_SE 0x0000000000aa0003
- MOUSE_SEE 0x0000000000aa0002
- MOUSE_R_BUTTON 0x0000000000aaa0bb
- MOUSE_L_BUTTON 0x0000000000aa0abb
- MOUSE_L+R_BUTTON 0x0000000000aaaabb
-
- 0 0x0000000000bb4a75
- 1 0x0000000000bbc1fe
- 2 0x0000000000bbc2fd
- 3 0x0000000000bb437c
- 4 0x0000000000bbc4fb
- 5 0x0000000000bb457a
- 6 0x0000000000bb4679
- 7 0x0000000000bbc7f8
- 8 0x0000000000bbc8f7
- 9 0x0000000000bb4976
- * 0x0000000000bbcbf4
- # 0x0000000000bb4c73
- REW 0x0000000000bb516e
- FWD 0x0000000000bbd0ef
- PAUSE 0x0000000000bbcef1
- PLAY 0x0000000000bbcdf2
- STOP 0x0000000000bb4f70
- VOLUME_UP 0x0000000000bbd3ec
- VOLUME_DOWN 0x0000000000bb546b
- MUTE 0x0000000000bb526d
- DISPLAY 0x0000000000bbd5ea
- CD 0x0000000000bbdae5
- SHOW_WIZ 0x0000000000bb5b64
- PG_UP 0x0000000000bbd6e9
- PG_DN 0x0000000000bb5768
- BACK 0x0000000000bb5867
- FORWARD 0x0000000000bbd9e6
- WWW 0x0000000000bbdce3
- CLOSE 0x0000000000bb5d62
-
- 0_UP 0x0000000000cc4a75
- 1_UP 0x0000000000ccc1fe
- 2_UP 0x0000000000ccc2fd
- 3_UP 0x0000000000cc437c
- 4_UP 0x0000000000ccc4fb
- 5_UP 0x0000000000cc457a
- 6_UP 0x0000000000cc4679
- 7_UP 0x0000000000ccc7f8
- 8_UP 0x0000000000ccc8f7
- 9_UP 0x0000000000cc4976
- *_UP 0x0000000000cccbf4
- #_UP 0x0000000000cc4c73
- REW_UP 0x0000000000cc516e
- FWD_UP 0x0000000000ccd0ef
- PAUSE_UP 0x0000000000cccef1
- PLAY_UP 0x0000000000cccdf2
- STOP_UP 0x0000000000cc4f70
- VOLUME_UP_UP 0x0000000000ccd3ec
- VOLUME_DOWN_UP 0x0000000000cc546b
- MUTE_UP 0x0000000000cc526d
- DISPLAY_UP 0x0000000000ccd5ea
- CD_UP 0x0000000000ccdae5
- SHOW_WIZ_UP 0x0000000000cc5b64
- PG_UP_UP 0x0000000000ccd6e9
- PG_DN_UP 0x0000000000cc5768
- BACK_UP 0x0000000000cc5867
- FORWARD_UP 0x0000000000ccd9e6
- WWW_UP 0x0000000000ccdce3
- CLOSE_UP 0x0000000000cc5d62
- end codes
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek
deleted file mode 100644
index fc93f79..0000000
--- a/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek
+++ /dev/null
@@ -1,72 +0,0 @@
-#
-# lircmd config file for the Silitek control
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 1 4 2
-
-#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ
-
-MOVE_N SILITEK_SM-1000 MOUSE_N
-MOVE_N SILITEK_SM-1000 MOUSE_N
-
-MOVE_N SILITEK_SM-1000 MOUSE_NNE
-MOVE_NE SILITEK_SM-1000 MOUSE_NNE
-
-MOVE_NE SILITEK_SM-1000 MOUSE_NE
-MOVE_NE SILITEK_SM-1000 MOUSE_NE
-
-MOVE_E SILITEK_SM-1000 MOUSE_NEE
-MOVE_NE SILITEK_SM-1000 MOUSE_NEE
-
-MOVE_E SILITEK_SM-1000 MOUSE_E
-MOVE_E SILITEK_SM-1000 MOUSE_E
-
-MOVE_E SILITEK_SM-1000 MOUSE_SEE
-MOVE_SE SILITEK_SM-1000 MOUSE_SEE
-
-MOVE_SE SILITEK_SM-1000 MOUSE_SE
-MOVE_SE SILITEK_SM-1000 MOUSE_SE
-
-MOVE_S SILITEK_SM-1000 MOUSE_SSE
-MOVE_SE SILITEK_SM-1000 MOUSE_SSE
-
-MOVE_S SILITEK_SM-1000 MOUSE_S
-MOVE_S SILITEK_SM-1000 MOUSE_S
-
-MOVE_S SILITEK_SM-1000 MOUSE_SSW
-MOVE_SW SILITEK_SM-1000 MOUSE_SSW
-
-MOVE_SW SILITEK_SM-1000 MOUSE_SW
-MOVE_SW SILITEK_SM-1000 MOUSE_SW
-
-MOVE_W SILITEK_SM-1000 MOUSE_SWW
-MOVE_SW SILITEK_SM-1000 MOUSE_SWW
-
-MOVE_W SILITEK_SM-1000 MOUSE_W
-MOVE_W SILITEK_SM-1000 MOUSE_W
-
-MOVE_W SILITEK_SM-1000 MOUSE_NWW
-MOVE_NW SILITEK_SM-1000 MOUSE_NWW
-
-MOVE_NW SILITEK_SM-1000 MOUSE_NW
-MOVE_NW SILITEK_SM-1000 MOUSE_NW
-
-MOVE_N SILITEK_SM-1000 MOUSE_NNW
-MOVE_NW SILITEK_SM-1000 MOUSE_NNW
-
-MOVE_IN SILITEK_SM-1000 PG_UP
-MOVE_OUT SILITEK_SM-1000 PG_DN
-
-BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY
-#BUTTON2_TOGGLE SILITEK_SM-1000 5
-#BUTTON3_TOGGLE SILITEK_SM-1000 6
-
-BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON
-BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON
-BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON
-
-# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
deleted file mode 100644
index 288bb51..0000000
--- a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf
+++ /dev/null
@@ -1,127 +0,0 @@
-# Please make this file available to others
-# by sending it to <lirc@bartelmus.de>
-#
-# this config file was automatically generated
-# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005
-#
-# contributed by
-#
-# brand: Snapstream Firefly Remote
-# model no. of remote control:
-# devices being controlled by this remote:
-#
-
-begin remote
-
-name Snapstream_Firefly
-bits 40
-eps 30
-aeps 100
-
-one 0 0
-zero 0 0
-gap 219964
-toggle_bit 0
-
-
-begin codes
-MAXI 0x0000001481AC0000
-MAXI 0x00000014012C0000
-CLOSE 0x00000014D7020000
-CLOSE 0x0000001457820000
-1 0x00000014628D0000
-1 0x00000014E20D0000
-2 0x00000014E30E0000
-2 0x00000014638E0000
-3 0x00000014648F0000
-3 0x00000014E40F0000
-4 0x00000014E5100000
-4 0x0000001465900000
-5 0x0000001466910000
-5 0x00000014E6110000
-6 0x00000014E7120000
-6 0x0000001467920000
-7 0x0000001468930000
-7 0x00000014E8130000
-8 0x00000014E9140000
-8 0x0000001469940000
-9 0x000000146A950000
-9 0x00000014EA150000
-0 0x00000014EC170000
-0 0x000000146C970000
-BACK 0x000000146B960000
-BACK 0x00000014EB160000
-ENT 0x00000014ED180000
-ENT 0x000000146D980000
-VOL+ 0x000000145E890000
-VOL+ 0x00000014DE090000
-VOL- 0x000000145D880000
-VOL- 0x00000014DD080000
-MUTE 0x000000145F8A0000
-MUTE 0x00000014DF0A0000
-FIREFLY 0x0000001455800000
-FIREFLY 0x00000014D5000000
-CH+ 0x00000014608B0000
-CH+ 0x00000014E00B0000
-CH- 0x00000014618C0000
-CH- 0x00000014E10C0000
-INFO 0x0000001483AE0000
-INFO 0x00000014032E0000
-OPTION 0x0000001484AF0000
-OPTION 0x00000014042F0000
-UP 0x000000146F9A0000
-UP 0x00000014EF1A0000
-LEFT 0x00000014729D0000
-LEFT 0x00000014F21D0000
-DOWN 0x0000001477A20000
-DOWN 0x00000014F7220000
-RIGHT 0x00000014749F0000
-RIGHT 0x00000014F41F0000
-OK 0x00000014739E0000
-OK 0x00000014F31E0000
-MENU 0x00000014719C0000
-MENU 0x00000014F11C0000
-EXIT 0x0000001475A00000
-EXIT 0x00000014F5200000
-REC 0x00000014FC270000
-REC 0x000000147CA70000
-PLAY 0x00000014FA250000
-PLAY 0x000000147AA50000
-STOP 0x00000014FD280000
-STOP 0x000000147DA80000
-REW 0x00000014F9240000
-REW 0x0000001479A40000
-FWD 0x00000014FB260000
-FWD 0x000000147BA60000
-PREV 0x00000014002B0000
-PREV 0x0000001480AB0000
-PAUSE 0x00000014FE290000
-PAUSE 0x000000147EA90000
-NEXT 0x00000014FF2A0000
-NEXT 0x000000147FAA0000
-MUSIC 0x00000014DB060000
-MUSIC 0x000000145B860000
-PHOTOS 0x00000014DA050000
-PHOTOS 0x000000145A850000
-DVD 0x00000014D9040000
-DVD 0x0000001459840000
-TV 0x00000014D8030000
-TV 0x0000001458830000
-VIDEO 0x00000014DC070000
-VIDEO 0x000000145C870000
-HELP 0x00000014D6010000
-HELP 0x0000001456810000
-MOUSE 0x00000014022D0000
-MOUSE 0x0000001482AD0000
-A 0x00000014EE190000
-A 0x000000146E990000
-B 0x00000014F01B0000
-B 0x00000014709B0000
-C 0x00000014F6210000
-C 0x0000001476A10000
-D 0x00000014F8230000
-D 0x0000001478A30000
-
-end codes
-
-end remote
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
deleted file mode 100644
index e918011..0000000
--- a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt
+++ /dev/null
@@ -1,590 +0,0 @@
-# ~/.mythtv/lircrc
-#
-# MythTV native LIRC config file for
-# the new grey Hauppauge remote
-#
-# Modified from Jarod Wilson's which came from Jeff Campbell's
-# By Brad Templeton
-
-
-# Here we have the jump point commands. They only work if you have
-# defined function keys for these jump points. For me the most
-# common command is the menu of recordings, so I put that on "videos"
-# even though that's counter-intuitive
-
-begin
-prog = mythtv
-button = TV
-repeat = 3
-config = F5
-end
-
-begin
-prog = mythtv
-button = Videos
-repeat = 3
-config = F2
-end
-
-# Not yet defined
-begin
-prog = mythtv
-button = Music
-repeat = 3
-config = Up
-end
-
-# Given another function for now, I don't use mythgallery
-begin
-prog = mythtv
-button = Pictures
-repeat = 3
-config = F
-end
-
-begin
-prog = mythtv
-button = Guide
-repeat = 3
-config = F3
-end
-
-# I stuck the "todo" list on here as Myth has no radio function
-begin
-prog = mythtv
-button = Radio
-repeat = 3
-config = F4
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = LEFT
-repeat = 3
-config = Left
-end
-
-begin
-prog = mythtv
-button = RIGHT
-repeat = 3
-config = Right
-end
-
-# Channel Up
-begin
-prog = mythtv
-button = Channel-UP
-repeat = 3
-config = Up
-end
-
-# Channel Down
-begin
-prog = mythtv
-button = Channel-DOWN
-repeat = 3
-config = Down
-end
-
-# OK/Select
-begin
-prog = mythtv
-button = Ok
-config = Space
-end
-
-# Play
-begin
-prog = mythtv
-button = Play
-config = Return
-end
-
-# Stop
-begin
-prog = mythtv
-button = Stop
-config = I
-end
-
-# Escape/Exit/Back
-begin
-prog = mythtv
-button = BACK
-config = Esc
-end
-
-# Power Off/Exit
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-
-# Pause
-begin
-prog = mythtv
-button = Pause
-repeat = 3
-config = P
-end
-
-# Mute
-begin
-prog = mythtv
-button = Mute
-repeat = 3
-config = |
-end
-
-# Fast forward (30 sec default)
-begin
-prog = mythtv
-button = Rewind
-repeat = 3
-config = PgUp
-end
-
-# Rewind (10 sec default)
-begin
-prog = mythtv
-button = Forward
-repeat = 3
-config = PgDown
-end
-
-# Skip forward (10 min default)
-begin
-prog = mythtv
-button = Next
-repeat = 3
-config = End
-end
-
-# Skip backward (10 min default)
-begin
-prog = mythtv
-button = Previous
-repeat = 3
-config = Home
-end
-
-# Record
-begin
-prog = mythtv
-button = Record
-repeat = 3
-config = R
-end
-
-# Delete
-begin
-prog = mythtv
-button = Red
-repeat = 3
-config = D
-end
-
-# Decrease play speed
-begin
-prog = mythtv
-button = Green
-repeat = 3
-config = J
-end
-
-# Display EPG while in live TV,
-# View selected show while in EPG
-begin
-prog = mythtv
-button = Menu
-repeat = 3
-config = M
-end
-
-# Scroll up
-begin
-prog = mythtv
-button = Volume-UP
-repeat = 3
-config = F11
-end
-
-# Scroll down
-begin
-prog = mythtv
-button = Volume-DOWN
-repeat = 3
-config = F10
-end
-
-# Bring up OSD info
-begin
-prog = mythtv
-button = Go
-repeat = 3
-config = I
-end
-
-# Change display aspect ratio
-begin
-prog = mythtv
-button = Prev-Channel
-repeat = 3
-config = W
-end
-
-# double speed watch
-begin
-prog = mythtv
-button = Yellow
-repeat = 3
-config = J
-end
-
-# change tuners
-#begin
-#prog = mythtv
-#button = hash
-#repeat = 3
-#config = Y
-#end
-
-# Bring up Time stretch
-begin
-prog = mythtv
-button = Blue
-repeat = 3
-config = Y
-end
-
-# Numbers 0-9
-
-begin
-prog = mythtv
-button = 0
-repeat = 3
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-repeat = 3
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-repeat = 3
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-repeat = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-repeat = 3
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-repeat = 3
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-repeat = 3
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-repeat = 3
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-repeat = 3
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-repeat = 3
-config = 9
-end
-
-
-### MPlayer lirc setup
-
-# Show OSD
-begin
-prog = mplayer
-button = MENU
-repeat = 3
-config = osd
-end
-
-# Pause playback
-begin
-prog = mplayer
-button = PAUSE
-repeat = 3
-config = pause
-end
-
-# Skip ahead a minute if playing
-# If paused, resume playing
-begin
-prog = mplayer
-button = PLAY
-repeat = 3
-config = seek +1
-end
-
-# Stop playback and exit
-begin
-prog = mplayer
-button = Back
-repeat = 3
-config = quit
-end
-
-# Mute
-begin
-prog = mplayer
-button = MUTE
-repeat = 3
-config = mute
-end
-
-# Seek back 10 seconds
-begin
-prog = mplayer
-button = LEFT
-repeat = 3
-config = seek -7
-end
-
-# Seek forward 30 seconds
-begin
-prog = mplayer
-button = RIGHT
-repeat = 3
-config = seek +30
-end
-
-# Quit
-begin
-prog = mplayer
-button = EXIT
-repeat = 3
-config = quit
-end
-
-# Seek forward 10 minutes
-begin
-prog = mplayer
-button = SKIP
-repeat = 3
-config = seek +600
-end
-
-# Seek backward 10 minutes
-begin
-prog = mplayer
-button = REPLAY
-repeat = 3
-config = seek -600
-end
-
-# Toggle full-screen
-begin
-prog = mplayer
-button = FULL
-repeat = 3
-config = vo_fullscreen
-end
-
-### Xine lirc setup
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = OFF
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = CH+
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = CH-
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = VOL-
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = VOL+
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = BACK
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = FFW
-repeat = 3
-#config = SpeedFaster
-config = SeekRelative+60
-end
-
-begin
-prog = xine
-button = REW
-repeat = 3
-#config = SpeedSlower
-config = SeekRelative-60
-end
-
-begin
-prog = xine
-button = FULL
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = BLANK
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = SKIP
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = REPLAY
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = GO
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = RED
-repeat = 3
-config = Quit
-end
-
-begin
-prog = xine
-button = RED
-repeat = 3
-config = Quit
-end
\ No newline at end of file
diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg
deleted file mode 100644
index a1fbc6e..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
deleted file mode 100644
index 8e453b9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand: Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
- name Streamzap_PC_Remote
- bits 6
- flags RC5|CONST_LENGTH
- eps 30
- aeps 100
-
- one 889 889
- zero 889 889
- plead 889
- pre_data_bits 8
- pre_data 0xA3
- gap 108344
- toggle_bit 2
-
-
- begin codes
- 0 0x00
- 1 0x01
- 2 0x02
- 3 0x03
- 4 0x04
- 5 0x05
- 6 0x06
- 7 0x07
- 8 0x08
- 9 0x09
- POWER 0x0A
- MUTE 0x0B
- CH_UP 0x0C
- VOL_UP 0x0D
- CH_DOWN 0x0E
- VOL_DOWN 0x0F
- UP 0x10
- LEFT 0x11
- OK 0x12
- RIGHT 0x13
- DOWN 0x14
- MENU 0x15
- EXIT 0x16
- PLAY 0x17
- PAUSE 0x18
- STOP 0x19
- |<< 0x1A
- >>| 0x1B
- RECORD 0x1C
- << 0x1D
- >> 0x1E
- RED 0x20
- GREEN 0x21
- YELLOW 0x22
- BLUE 0x23
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc b/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc
deleted file mode 100755
index 5e668b5..0000000
--- a/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc
+++ /dev/null
@@ -1,832 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'a
-
-
-#restart frontend
-begin
- remote = RS_LD
- button = RESET
- prog = irexec
- repeat = 0
- config = /usr/bin/restartfrontend.sh
-end
-
-#time
-begin
- remote = RS_LD
- button = TIME
- prog = irexec
- repeat = 10
- config = /usr/bin/saytime.sh
-end
-
-#screen blank
-begin
- remote = RS_LD
- button = BLANK
- prog = irexec
- repeat = 0
-# config = ls
- config = xset s activate ; xset s blank
-end
-
-
-#picture
-begin
-REMOTE = RS_LD
-prog = mythtv
-button = PICTURE
-repeat = 4
-config = f
-end
-
-#change aspect
-begin
-remote = RS_LD
-prog = mythtv
-button = ASPECT
-# change aspect ratio
-config = w
-end
-
-#Browse
-begin
-remote = RS_LD
-prog = mythtv
-button = BROWSE
-repeat = 8
-config = o
-end
-
-# delete key
-begin
-remote = RS_LD
-prog = mythtv
-button = DELETE
-repeat = 8
-config = d
-end
-
-
-#change card
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD
-repeat = 8
-config = y
-end
-
-# Change TV card input
-begin
-remote = RS_LD
-prog = mythtv
-button = CARD_SOURCE
-repeat = 4
-config = C
-end
-
-
-
-# Cycle through channel history
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = BLUE
-repeat = 4
-config = H
-end
-
-# Bring up OSD info
-begin
-remote = Streamzap_PC_Remote
-prog = mythtv
-button = YELLOW
-repeat = 4
-config = i
-end
-
-
-
-
-begin
-prog = mythtv
-button = 0
-config = 0
-end
-
-begin
-prog = mythtv
-button = 1
-config = 1
-end
-
-begin
-prog = mythtv
-button = 2
-config = 2
-end
-
-begin
-prog = mythtv
-button = 3
-config = 3
-end
-
-begin
-prog = mythtv
-button = 4
-config = 4
-end
-
-begin
-prog = mythtv
-button = 5
-config = 5
-end
-
-begin
-prog = mythtv
-button = 6
-config = 6
-end
-
-begin
-prog = mythtv
-button = 7
-config = 7
-end
-
-begin
-prog = mythtv
-button = 8
-config = 8
-end
-
-begin
-prog = mythtv
-button = 9
-config = 9
-end
-
-begin
-prog = mythtv
-button = POWER
-config = Esc
-end
-
-# ???
-begin
-prog = mythtv
-button = MUTE
-config = F9
-end
-
-begin
-prog = mythtv
-button = CH_UP
-repeat = 3
-config = PgUp
-end
-
-begin
-prog = mythtv
-button = VOL_UP
-repeat = 3
-config = ]
-end
-
-begin
-prog = mythtv
-button = CH_DOWN
-repeat = 3
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = VOL_DOWN
-repeat = 3
-config = [
-end
-
-begin
-prog = mythtv
-button = UP
-repeat = 3
-config = Up
-end
-
-begin
-prog = mythtv
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = Left
-end
-
-begin
-prog = mythtv
-button = OK
-config = Return
-end
-
-begin
-prog = mythtv
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = Right
-end
-
-begin
-prog = mythtv
-button = DOWN
-repeat = 3
-config = Down
-end
-
-begin
-prog = mythtv
-button = MENU
-config = m
-end
-
-begin
-prog = mythtv
-button = EXIT
-config = Esc
-end
-
-begin
-prog = mythtv
-button = PLAY
-config = Space
-end
-
-begin
-prog = mythtv
-button = PAUSE
-config = p
-end
-
-begin
-prog = mythtv
-button = STOP
-config = Esc
-end
-
-begin
-prog = mythtv
-# skip backward
-button = |<<
-config = PgUp
-end
-
-begin
-prog = mythtv
-# skip forward
-button = >>|
-config = PgDown
-end
-
-begin
-prog = mythtv
-button = RECORD
-config = r
-end
-
-begin
-prog = mythtv
-# rewind
-button = <<
-config = Home
-end
-
-begin
-prog = mythtv
-# fast forward
-button = >>
-config = End
-end
-
-begin
-prog = mythtv
-button = RED
-# Delete
-config = d
-end
-
-begin
-prog = mythtv
-button = GREEN
-# Info
-config = i
-end
-
-#begin
-#prog = mythtv
-#button = YELLOW
-# change aspect ratio
-#config = w
-#end
-
-begin
-prog = mythtv
-button = BLUE
-config = Tab
-end
-
-# MPLAYER
-begin
-prog = mplayer
-button = POWER
-config = quit
-end
-
-begin
-prog = mplayer
-button = MUTE
-config = mute
-end
-
-begin
-prog = mplayer
-button = VOL_UP
-repeat = 3
-config = volume +1
-end
-
-begin
-prog = mplayer
-button = VOL_DOWN
-repeat = 3
-config = volume -1
-end
-
-begin
-prog = mplayer
-button = UP
-repeat = 3
-config = seek +10
-end
-
-begin
-prog = mplayer
-button = LEFT
-# navigates, or skips back during playback or live tv.
-config = seek -60
-end
-
-begin
-prog = mplayer
-button = RIGHT
-# navigates, or skips forwards during playback or live tv.
-config = seek +60
-end
-
-begin
-prog = mplayer
-button = DOWN
-repeat = 3
-config = seek -10
-end
-
-begin
-prog = mplayer
-button = EXIT
-config = quit
-end
-
-begin
-prog = mplayer
-button = play
-config = speed_set 1.0
-end
-
-begin
- prog = mplayer
- button = pause
- config = pause
-end
-
-begin
-prog = mplayer
-button = STOP
-config = quit
-end
-
-begin
-prog = mplayer
-# skip backward
-button = |<<
-config = seek -600
-end
-
-begin
-prog = mplayer
-# skip forward
-button = >>|
-config = seek +600
-end
-
-begin
-prog = mplayer
-# slow forward
-button = <<
-config = speed_mult 0.5
-end
-
-begin
-prog = mplayer
-# fast forward
-button = >>
-config = speed_mult 2.0
-end
-
-### xine commands
-
-begin
-prog = xine
-button = YELLOW
-repeat = 4
-#config = ToggleVisiblity
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 4
-config = SeekRelative+60
-end
-
-# increase brightness by 10
-begin
- button = DELETE
- prog = xine
- repeat = 4
- config = BrightnessControl+
-end
-
-# decrease brightness by 10
-begin
- button = PICTURE
- prog = xine
- repeat = 4
- config = BrightnessControl-
-end
-
-
-begin
-prog = xine
-button = PAUSE
-repeat = 4
-config = Pause
-end
-
-begin
-prog = xine
-button = PLAY
-repeat = 4
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 4
-config = mute
-end
-
-begin
-prog = xine
-button = <<
-repeat = 4
-config = SeekRelative-30
-end
-
-begin
-prog = xine
-button = >>
-repeat = 4
-#config = SeekRelative+30
-config = SpeedFaster
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 4
-config = quit
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 4
-config = quit
-end
-
-
-begin
-prog = xine
-button = FREEZE
-repeat = 4
-config = SeekRelative+1200
-end
-
-begin
-prog = xine
-button = MOVE
-repeat = 4
-config = SeekRelative-1200
-end
-
-begin
-prog = xine
-button = 3
-config = SpuNext
-repeat = 0
-end
-
-# Select previous sub picture (subtitle) channel.
-begin
-button = 1
-prog = xine
-repeat = 0
-config = SpuPrior
-end
-
-# Select next audio channel.
-begin
-button = 9
-prog = xine
-repeat = 0
-config = AudioChannelNext
-end
-
-# Select previous audio channel.
-begin
-button = 7
-prog = xine
-repeat = 0
-config = AudioChannelPrior
-end
-
-
-
-# Up event.
-begin
-
-button = UP
-prog = xine
-repeat = 8
-config = EventUp
-end
-
-# Down event.
-begin
-
-button = DOWN
-prog = xine
-repeat = 8
-config = EventDown
-end
-
-# Left event.
-begin
-
-button = LEFT
-prog = xine
-repeat = 8
-config = EventLeft
-end
-
-# Right event.
-begin
-
-button = RIGHT
-prog = xine
-repeat = 8
-config = EventRight
-end
-
-# Select event.
-begin
-prog = xine
-button = ok
-repeat = 8
-config = EventSelect
-end
-
-# Down Chapter
-begin
-
-button = CH_DOWN
-prog = xine
-repeat = 8
-config = EventPrior
-end
-
-# Next Chapter.
-begin
-
-button = CH_UP
-prog = xine
-repeat = 8
-config = EventNext
-end
-
-# menu.
-begin
-
-button = record
-prog = xine
-repeat = 8
-config = RootMenu
-end
-
-# Toggle aspect ratio
-begin
-prog = xine
-button = ASPECT
-repeat = 0
-config = ToggleAspectRatio
-end
-
-
-
-#######xmms
-begin xmms
- begin
- prog = xmms
- button = PLAY
- config = PLAY
- end
- begin
- prog = xmms
- button = clear
- config = PLAYLIST_CLEAR
- end
- begin
- prog = xmms
- button = load
- config = PLAYLIST_ADD .xmms/xmms.m3u
- end
- begin
- prog = xmms
- button = PAUSE
- config = PAUSE
- end
- begin
- prog = xmms
- button = STOP
- config = STOP
- end
- begin
- prog = xmms
- button = EXIT
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = POWER
- config = QUIT
- flags = mode
- end
-
- begin
- prog = xmms
- button = CH_UP
- config = NEXT
- end
- begin
- prog = xmms
- button = CH_DOWN
- config = PREV
- end
-
-
-
-begin
- prog = xmms
- button = >>|
- config = NEXT
- end
-begin
- prog = xmms
- button = |<<
- config = PREV
-end
-
-
-begin
- prog = xmms
- button = <<
- config = FWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = <<
- config = BWD 10
- repeat = 2
- end
- begin
- prog = xmms
- button = volup
- config = VOL_UP 10
- repeat = 2
- end
- begin
- prog = xmms
- button = voldown
- config = VOL_DOWN 10
- repeat = 2
- end
- begin
- prog = xmms
- button = 1
- config = ONE
- end
- begin
- prog = xmms
- button = 2
- config = TWO
- end
- begin
- prog = xmms
- button = 3
- config = THREE
- end
- begin
- prog = xmms
- button = 4
- config = FOUR
- end
- begin
- prog = xmms
- button = 5
- config = FIVE
- end
- begin
- prog = xmms
- button = 6
- config = SIX
- end
- begin
- prog = xmms
- button = 7
- config = SEVEN
- end
- begin
- prog = xmms
- button = 8
- config = EIGHT
- end
- begin
- prog = xmms
- button = 9
- config = NINE
- end
- begin
- prog = xmms
- button = 0
- config = ZERO
- end
- begin
- prog = xmms
- button = enter
- config = SETPOS
- end
-end xmms
-
-#
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg
deleted file mode 100644
index 4d1a5fe..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI
deleted file mode 100644
index 6dd84f9..0000000
--- a/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI
+++ /dev/null
@@ -1,42 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000
-#
-# contributed by Peter Schlaf
-#
-# brand: Technisat
-# model:
-# supported devices: MediaFocus PC card
-#
-
-begin remote
-
- name TECHNISAT
- bits 10
- flags SPACE_ENC|CONST_LENGTH
- eps 20
- aeps 150
-
- one 141 7590
- zero 141 5090
- ptrail 141
- pre_data_bits 1
- pre_data 0x1
- gap 121440
- repeat_bit 0
- toggle_bit 2
-
- frequency 38000
- duty_cycle 33
-
- begin codes
- MUTE 0x0000000000000046
- VOL+ 0x000000000000006E
- VOL- 0x000000000000006F
- CH+ 0x0000000000000047
- CH- 0x0000000000000048
- end codes
-
-end remote
-
-
diff --git a/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230
deleted file mode 100644
index 9562f60..0000000
--- a/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# This is for the remote that Tekram bundles with its M230 card (Mach64)
-# Commands from the remote are hardware-decoded
-#
-# contributed by Froenchenko Leonid <lfroen@galileo.co.il>
-#
-# brand: Tekram M230 (ATI Mach64)
-# supported devices: This remote control comes with TV Tuner cards from
-# Tekram based on ATI 264VT (btt829)
-#
-
-begin remote
- name M230
- bits 8
- begin codes
- 0 0x00
- 1 0x01
- 2 0x02
- 3 0x03
- 4 0x04
- 5 0x05
- 6 0x06
- 7 0x07
- 8 0x08
- 9 0x09
- RECALL 0x0A
- ENTER 0x17
- POWER 0x1C
- SOURCE 0x15
- PC_VID 0x12
- STILL 0x11
- TTX 0x0F
- FAV 0x13
- MUTE 0x10
- VOL_UP 0x1A
- VOL_DN 0x1E
- CH_UP 0x1B
- CH_DN 0x1F
- PLAY 0x0D
- STOP 0x0E
- REW 0x1D
- FFW 0x19
- ADD_ER 0x16
- FUNC 0x14
- F_PLUS 0x18
- F_MINUS 0x0C
- end codes
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230
deleted file mode 100644
index 0bacf5d..0000000
--- a/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# lircmd config file for Tekram remote control
-# Contributed by Froenchenko Leonid <lfroen@galileo.co.il>
-#
-
-PROTOCOL IntelliMouse
-
-# ACCELERATOR start max multiplier
-
-#ACCELERATOR 2 30 5
-
-ACTIVATE * MOUSE_MODE
-
-MOVE_N * 2
-MOVE_NE * 3
-MOVE_E * 6
-MOVE_SE * 9
-MOVE_S * 8
-MOVE_SW * 7
-MOVE_W * 4
-MOVE_NW * 1
-
-# These are lircmd-0.5.5 extensions
-MOVE_IN * VOL_UP
-MOVE_OUT * VOL_DN
-
-BUTTON1_CLICK * RECALL
-BUTTON2_CLICK * 0
-BUTTON3_CLICK * ENTER
-
-BUTTON1_TOGGLE * PLAY
-BUTTON2_TOGGLE * STOP
-BUTTON3_TOGGLE * REW
diff --git a/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg b/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg
deleted file mode 100644
index a034186..0000000
Binary files a/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg and /dev/null differ
diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote
deleted file mode 100644
index 73df340..0000000
--- a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote
+++ /dev/null
@@ -1,116 +0,0 @@
-#
-#
-# contributed by Isaac Lauer
-# modified by Shawn Nycz
-# modified by Brian Craft
-#
-# brand: X10
-# model: MP3 MouseRemote, Model mk19a
-#
-
-begin remote
-
- name mouseremote
- bits 16
- eps 30
- aeps 100
- one 0 0
- zero 0 0
- pre_data_bits 8
- pre_data 0x08
- post_data_bits 8
- post_data 0x7f
- min_repeat 2
- gap 140000
-
- begin codes
- POWER 0x000000000000000F
- PC 0x000000000000002B
- LAST 0x000000000000004F
- CHANUP 0x0000000000000002
- CHANDOWN 0x0000000000000003
- VOLUP 0x0000000000000006
- VOLDOWN 0x0000000000000007
- MUTE 0x0000000000000005
- 1 0x0000000000000041
- 2 0x0000000000000042
- 3 0x0000000000000043
- 4 0x0000000000000044
- 5 0x0000000000000045
- 6 0x0000000000000046
- 7 0x0000000000000047
- 8 0x0000000000000048
- 9 0x0000000000000049
- 0 0x0000000000000040
- ENTER 0x000000000000004a
- ADOTB 0x000000000000005D
- REWIND 0x000000000000001C
- PLAY 0x000000000000000D
- FFWD 0x000000000000001D
- STOP 0x000000000000000E
- PAUSE 0x000000000000004E
- RECORD 0x00000000000000FF
- ENTER 0x000000000000004A
- LAST 0x000000000000004F
- DISP 0x000000000000005C
- SHIFT 0x000000000000006B
- GUIDE 0x000000000000006D
- SELECT 0x0000000000000093
- PHONE 0x000000000000004B
- WEB 0x000000000000008B
- CD 0x00000000000000AB
- DVD 0x00000000000000CB
- MOUSE_SLOW_N 0x0000000000000110
- MOUSE_SLOW_NNE 0x0000000000000131
- MOUSE_SLOW_NE 0x0000000000000111
- MOUSE_SLOW_ENE 0x0000000000000113
- MOUSE_SLOW_E 0x0000000000000101
- MOUSE_SLOW_ESE 0x0000000000000193
- MOUSE_SLOW_SE 0x0000000000000191
- MOUSE_SLOW_SSE 0x00000000000001B1
- MOUSE_SLOW_S 0x0000000000000190
- MOUSE_SLOW_SSW 0x00000000000001B9
- MOUSE_SLOW_SW 0x0000000000000199
- MOUSE_SLOW_WSW 0x000000000000019B
- MOUSE_SLOW_W 0x0000000000000109
- MOUSE_SLOW_WNW 0x000000000000011B
- MOUSE_SLOW_NW 0x0000000000000119
- MOUSE_SLOW_NNW 0x0000000000000139
- MOUSE_MEDIUM_N 0x0000000000000310
- MOUSE_MEDIUM_NNE 0x0000000000000331
- MOUSE_MEDIUM_NE 0x0000000000000311
- MOUSE_MEDIUM_ENE 0x0000000000000313
- MOUSE_MEDIUM_E 0x0000000000000301
- MOUSE_MEDIUM_ESE 0x0000000000000393
- MOUSE_MEDIUM_SE 0x0000000000000391
- MOUSE_MEDIUM_SSE 0x00000000000003B1
- MOUSE_MEDIUM_S 0x0000000000000390
- MOUSE_MEDIUM_SSW 0x00000000000003B9
- MOUSE_MEDIUM_SW 0x0000000000000399
- MOUSE_MEDIUM_WSW 0x000000000000039B
- MOUSE_MEDIUM_W 0x0000000000000309
- MOUSE_MEDIUM_WNW 0x000000000000031B
- MOUSE_MEDIUM_NW 0x0000000000000319
- MOUSE_MEDIUM_NNW 0x0000000000000339
- MOUSE_FAST_N 0x0000000000000510
- MOUSE_FAST_NNE 0x0000000000000531
- MOUSE_FAST_NE 0x0000000000000511
- MOUSE_FAST_ENE 0x0000000000000513
- MOUSE_FAST_E 0x0000000000000501
- MOUSE_FAST_ESE 0x0000000000000593
- MOUSE_FAST_SE 0x0000000000000591
- MOUSE_FAST_SSE 0x00000000000005B1
- MOUSE_FAST_S 0x0000000000000590
- MOUSE_FAST_SSW 0x00000000000005B9
- MOUSE_FAST_SW 0x0000000000000599
- MOUSE_FAST_WSW 0x000000000000059B
- MOUSE_FAST_W 0x0000000000000509
- MOUSE_FAST_WNW 0x000000000000051B
- MOUSE_FAST_NW 0x0000000000000519
- MOUSE_FAST_NNW 0x0000000000000539
- BUTTONR_DOWN 0x0000000000000801
- BUTTONL_DOWN 0x0000000000000804
- BUTTON_UP 0x0000000000000800
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere
deleted file mode 100644
index c9bb727..0000000
--- a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-#
-# contributed by Isaac Lauer
-# modified by Shawn Nycz
-#
-# brand: X10
-# model: MP3 Anywhere Remote, Model UR81A
-# supported devices: at least FireCracker Receiver Model MR26A, maybe more
-#
-
-begin remote
-
- name mp3anywhere
- bits 8
- eps 30
- aeps 100
- one 0 0
- zero 0 0
- pre_data_bits 24
- pre_data 0xD5AAEE
- min_repeat 2
- gap 140000
-
- begin codes
- POWER 0x00000000000000F0
- PC 0x00000000000000D4
- LAST 0x00000000000000F2
- CHANUP 0x0000000000000040
- CHANDOWN 0x00000000000000C0
- VOLUP 0x0000000000000060
- VOLDOWN 0x00000000000000E0
- MUTE 0x00000000000000A0
- ONE 0x0000000000000082
- TWO 0x0000000000000042
- THREE 0x00000000000000C2
- FOUR 0x0000000000000022
- FIVE 0x00000000000000A2
- SIX 0x0000000000000062
- SEVEN 0x00000000000000E2
- EIGHT 0x0000000000000012
- NINE 0x0000000000000092
- ZERO 0x0000000000000002
- ENTER 0x0000000000000052
- ADOTB 0x00000000000000BA
- A 0x000000000000003A
- B 0x00000000000000D8
- C 0x00000000000000D6
- D 0x00000000000000D4
- MENU 0x00000000000000B6
- EXIT 0x00000000000000C9
- UP 0x00000000000000D5
- DOWN 0x00000000000000D3
- LEFT 0x00000000000000D2
- RIGHT 0x00000000000000D1
- OK 0x0000000000000052
- REWIND 0x0000000000000038
- PLAY 0x00000000000000B0
- FFWD 0x00000000000000B8
- RECORD 0x00000000000000FF
- STOP 0x0000000000000070
- PAUSE 0x0000000000000072
- end codes
-
-end remote
diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote
deleted file mode 100644
index c3c23b1..0000000
--- a/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote
+++ /dev/null
@@ -1,288 +0,0 @@
-#
-# lircmd config file for the mouseremote control
-#
-
-# ACCELERATOR start max multiplier
-
-ACCELERATOR 1 3 2
-
-#ACTIVATE * MENU
-
-
-MOVE_N mouseremote MOUSE_SLOW_N
-MOVE_N mouseremote MOUSE_SLOW_N
-
-MOVE_N mouseremote MOUSE_MEDIUM_N
-MOVE_N mouseremote MOUSE_MEDIUM_N
-MOVE_N mouseremote MOUSE_MEDIUM_N
-MOVE_N mouseremote MOUSE_MEDIUM_N
-
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-MOVE_N mouseremote MOUSE_FAST_N
-
-MOVE_N mouseremote MOUSE_SLOW_NNE
-MOVE_NE mouseremote MOUSE_SLOW_NNE
-
-MOVE_N mouseremote MOUSE_MEDIUM_NNE
-MOVE_NE mouseremote MOUSE_MEDIUM_NNE
-MOVE_N mouseremote MOUSE_MEDIUM_NNE
-MOVE_NE mouseremote MOUSE_MEDIUM_NNE
-
-MOVE_N mouseremote MOUSE_FAST_NNE
-MOVE_NE mouseremote MOUSE_FAST_NNE
-MOVE_N mouseremote MOUSE_FAST_NNE
-MOVE_NE mouseremote MOUSE_FAST_NNE
-MOVE_N mouseremote MOUSE_FAST_NNE
-MOVE_NE mouseremote MOUSE_FAST_NNE
-MOVE_N mouseremote MOUSE_FAST_NNE
-MOVE_NE mouseremote MOUSE_FAST_NNE
-
-MOVE_NE mouseremote MOUSE_SLOW_NE
-MOVE_NE mouseremote MOUSE_SLOW_NE
-
-MOVE_NE mouseremote MOUSE_MEDIUM_NE
-MOVE_NE mouseremote MOUSE_MEDIUM_NE
-MOVE_NE mouseremote MOUSE_MEDIUM_NE
-MOVE_NE mouseremote MOUSE_MEDIUM_NE
-
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-MOVE_NE mouseremote MOUSE_FAST_NE
-
-MOVE_E mouseremote MOUSE_SLOW_ENE
-MOVE_NE mouseremote MOUSE_SLOW_ENE
-
-MOVE_E mouseremote MOUSE_MEDIUM_ENE
-MOVE_NE mouseremote MOUSE_MEDIUM_ENE
-MOVE_E mouseremote MOUSE_MEDIUM_ENE
-MOVE_NE mouseremote MOUSE_MEDIUM_ENE
-
-MOVE_E mouseremote MOUSE_FAST_ENE
-MOVE_NE mouseremote MOUSE_FAST_ENE
-MOVE_E mouseremote MOUSE_FAST_ENE
-MOVE_NE mouseremote MOUSE_FAST_ENE
-MOVE_E mouseremote MOUSE_FAST_ENE
-MOVE_NE mouseremote MOUSE_FAST_ENE
-MOVE_E mouseremote MOUSE_FAST_ENE
-MOVE_NE mouseremote MOUSE_FAST_ENE
-
-MOVE_E mouseremote MOUSE_SLOW_E
-MOVE_E mouseremote MOUSE_SLOW_E
-
-MOVE_E mouseremote MOUSE_MEDIUM_E
-MOVE_E mouseremote MOUSE_MEDIUM_E
-MOVE_E mouseremote MOUSE_MEDIUM_E
-MOVE_E mouseremote MOUSE_MEDIUM_E
-
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-MOVE_E mouseremote MOUSE_FAST_E
-
-MOVE_E mouseremote MOUSE_SLOW_ESE
-MOVE_SE mouseremote MOUSE_SLOW_ESE
-
-MOVE_E mouseremote MOUSE_MEDIUM_ESE
-MOVE_SE mouseremote MOUSE_MEDIUM_ESE
-MOVE_E mouseremote MOUSE_MEDIUM_ESE
-MOVE_SE mouseremote MOUSE_MEDIUM_ESE
-
-MOVE_E mouseremote MOUSE_FAST_ESE
-MOVE_SE mouseremote MOUSE_FAST_ESE
-MOVE_E mouseremote MOUSE_FAST_ESE
-MOVE_SE mouseremote MOUSE_FAST_ESE
-MOVE_E mouseremote MOUSE_FAST_ESE
-MOVE_SE mouseremote MOUSE_FAST_ESE
-MOVE_E mouseremote MOUSE_FAST_ESE
-MOVE_SE mouseremote MOUSE_FAST_ESE
-
-MOVE_SE mouseremote MOUSE_SLOW_SE
-MOVE_SE mouseremote MOUSE_SLOW_SE
-
-MOVE_SE mouseremote MOUSE_MEDIUM_SE
-MOVE_SE mouseremote MOUSE_MEDIUM_SE
-MOVE_SE mouseremote MOUSE_MEDIUM_SE
-MOVE_SE mouseremote MOUSE_MEDIUM_SE
-
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-MOVE_SE mouseremote MOUSE_FAST_SE
-
-MOVE_S mouseremote MOUSE_SLOW_SSE
-MOVE_SE mouseremote MOUSE_SLOW_SSE
-
-MOVE_S mouseremote MOUSE_MEDIUM_SSE
-MOVE_SE mouseremote MOUSE_MEDIUM_SSE
-MOVE_S mouseremote MOUSE_MEDIUM_SSE
-MOVE_SE mouseremote MOUSE_MEDIUM_SSE
-
-MOVE_S mouseremote MOUSE_FAST_SSE
-MOVE_SE mouseremote MOUSE_FAST_SSE
-MOVE_S mouseremote MOUSE_FAST_SSE
-MOVE_SE mouseremote MOUSE_FAST_SSE
-MOVE_S mouseremote MOUSE_FAST_SSE
-MOVE_SE mouseremote MOUSE_FAST_SSE
-MOVE_S mouseremote MOUSE_FAST_SSE
-MOVE_SE mouseremote MOUSE_FAST_SSE
-
-MOVE_S mouseremote MOUSE_SLOW_S
-MOVE_S mouseremote MOUSE_SLOW_S
-
-MOVE_S mouseremote MOUSE_MEDIUM_S
-MOVE_S mouseremote MOUSE_MEDIUM_S
-MOVE_S mouseremote MOUSE_MEDIUM_S
-MOVE_S mouseremote MOUSE_MEDIUM_S
-
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-MOVE_S mouseremote MOUSE_FAST_S
-
-MOVE_S mouseremote MOUSE_SLOW_SSW
-MOVE_SW mouseremote MOUSE_SLOW_SSW
-
-MOVE_S mouseremote MOUSE_MEDIUM_SSW
-MOVE_SW mouseremote MOUSE_MEDIUM_SSW
-MOVE_S mouseremote MOUSE_MEDIUM_SSW
-MOVE_SW mouseremote MOUSE_MEDIUM_SSW
-
-MOVE_S mouseremote MOUSE_FAST_SSW
-MOVE_SW mouseremote MOUSE_FAST_SSW
-MOVE_S mouseremote MOUSE_FAST_SSW
-MOVE_SW mouseremote MOUSE_FAST_SSW
-MOVE_S mouseremote MOUSE_FAST_SSW
-MOVE_SW mouseremote MOUSE_FAST_SSW
-MOVE_S mouseremote MOUSE_FAST_SSW
-MOVE_SW mouseremote MOUSE_FAST_SSW
-
-MOVE_SW mouseremote MOUSE_SLOW_SW
-MOVE_SW mouseremote MOUSE_SLOW_SW
-
-MOVE_SW mouseremote MOUSE_MEDIUM_SW
-MOVE_SW mouseremote MOUSE_MEDIUM_SW
-MOVE_SW mouseremote MOUSE_MEDIUM_SW
-MOVE_SW mouseremote MOUSE_MEDIUM_SW
-
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-MOVE_SW mouseremote MOUSE_FAST_SW
-
-MOVE_W mouseremote MOUSE_SLOW_WSW
-MOVE_SW mouseremote MOUSE_SLOW_WSW
-
-MOVE_W mouseremote MOUSE_MEDIUM_WSW
-MOVE_SW mouseremote MOUSE_MEDIUM_WSW
-MOVE_W mouseremote MOUSE_MEDIUM_WSW
-MOVE_SW mouseremote MOUSE_MEDIUM_WSW
-
-MOVE_W mouseremote MOUSE_FAST_WSW
-MOVE_SW mouseremote MOUSE_FAST_WSW
-MOVE_W mouseremote MOUSE_FAST_WSW
-MOVE_SW mouseremote MOUSE_FAST_WSW
-MOVE_W mouseremote MOUSE_FAST_WSW
-MOVE_SW mouseremote MOUSE_FAST_WSW
-MOVE_W mouseremote MOUSE_FAST_WSW
-MOVE_SW mouseremote MOUSE_FAST_WSW
-
-MOVE_W mouseremote MOUSE_SLOW_W
-MOVE_W mouseremote MOUSE_SLOW_W
-
-MOVE_W mouseremote MOUSE_MEDIUM_W
-MOVE_W mouseremote MOUSE_MEDIUM_W
-MOVE_W mouseremote MOUSE_MEDIUM_W
-MOVE_W mouseremote MOUSE_MEDIUM_W
-
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-MOVE_W mouseremote MOUSE_FAST_W
-
-MOVE_W mouseremote MOUSE_SLOW_WNW
-MOVE_NW mouseremote MOUSE_SLOW_WNW
-
-MOVE_W mouseremote MOUSE_MEDIUM_WNW
-MOVE_NW mouseremote MOUSE_MEDIUM_WNW
-MOVE_W mouseremote MOUSE_MEDIUM_WNW
-MOVE_NW mouseremote MOUSE_MEDIUM_WNW
-
-MOVE_W mouseremote MOUSE_FAST_WNW
-MOVE_NW mouseremote MOUSE_FAST_WNW
-MOVE_W mouseremote MOUSE_FAST_WNW
-MOVE_NW mouseremote MOUSE_FAST_WNW
-MOVE_W mouseremote MOUSE_FAST_WNW
-MOVE_NW mouseremote MOUSE_FAST_WNW
-MOVE_W mouseremote MOUSE_FAST_WNW
-MOVE_NW mouseremote MOUSE_FAST_WNW
-
-MOVE_NW mouseremote MOUSE_SLOW_NW
-MOVE_NW mouseremote MOUSE_SLOW_NW
-
-MOVE_NW mouseremote MOUSE_MEDIUM_NW
-MOVE_NW mouseremote MOUSE_MEDIUM_NW
-MOVE_NW mouseremote MOUSE_MEDIUM_NW
-MOVE_NW mouseremote MOUSE_MEDIUM_NW
-
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-MOVE_NW mouseremote MOUSE_FAST_NW
-
-MOVE_N mouseremote MOUSE_SLOW_NNW
-MOVE_NW mouseremote MOUSE_SLOW_NNW
-
-MOVE_N mouseremote MOUSE_MEDIUM_NNW
-MOVE_NW mouseremote MOUSE_MEDIUM_NNW
-MOVE_N mouseremote MOUSE_MEDIUM_NNW
-MOVE_NW mouseremote MOUSE_MEDIUM_NNW
-
-MOVE_N mouseremote MOUSE_FAST_NNW
-MOVE_NW mouseremote MOUSE_FAST_NNW
-MOVE_N mouseremote MOUSE_FAST_NNW
-MOVE_NW mouseremote MOUSE_FAST_NNW
-MOVE_N mouseremote MOUSE_FAST_NNW
-MOVE_NW mouseremote MOUSE_FAST_NNW
-MOVE_N mouseremote MOUSE_FAST_NNW
-MOVE_NW mouseremote MOUSE_FAST_NNW
-
-BUTTON1_DOWN mouseremote BUTTONL_DOWN
-BUTTON2_DOWN mouseremote BUTTONR_DOWN
-
-BUTTON1_UP mouseremote BUTTON_UP
-BUTTON2_UP mouseremote BUTTON_UP
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.home b/abs/core-testing/live-installer/templates/samba/smb.conf.home
deleted file mode 100755
index b850a7d..0000000
--- a/abs/core-testing/live-installer/templates/samba/smb.conf.home
+++ /dev/null
@@ -1,10 +0,0 @@
-[home]
- path = /data/home/mythtv/
- public = yes
- only guest = yes
- writeable = yes
- printable = no
- force user = mythtv
- force group = mythtv
- create mask = 0755
-
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.media b/abs/core-testing/live-installer/templates/samba/smb.conf.media
deleted file mode 100755
index 6a4ec91..0000000
--- a/abs/core-testing/live-installer/templates/samba/smb.conf.media
+++ /dev/null
@@ -1,10 +0,0 @@
-[media]
- path = /data/media
- public = yes
- only guest = yes
- writeable = yes
- printable = no
- force user = mythtv
- force group = mythtv
- create mask = 0755
-
diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.template b/abs/core-testing/live-installer/templates/samba/smb.conf.template
deleted file mode 100644
index 42ddb99..0000000
--- a/abs/core-testing/live-installer/templates/samba/smb.conf.template
+++ /dev/null
@@ -1,125 +0,0 @@
-#
-#======================= Global Settings =====================================
-[global]
-
- workgroup = home_lan
- server string = MythVantage
-
-# Security mode. Defines in which mode Samba will operate. Possible
-# values are share, user, server, domain and ads. Most people will want
-# user level security. See the Samba-HOWTO-Collection for details.
- security = share
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-; hosts allow = 192.168.1. 192.168.2. 127.
-
- load printers = no
-
-# you may wish to override the location of the printcap file
-; printcap name = /etc/printcap
-
-; guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
- log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
- max log size = 50
-
-# Use password server option only with security = server
-# The argument list may include:
-# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-# password server = *
-; password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-; realm = MY_REALM
-
-# Backend to store user information in. New installations should
-# use either tdbsam or ldapsam. smbpasswd is available for backwards
-# compatibility. tdbsam requires no further configuration.
-; passdb backend = tdbsam
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-# this line. The included file is read at that point.
-; include = /usr/local/samba/lib/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-; interfaces = 192.168.12.2/24 192.168.13.2/24
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-; local master = no
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-; os level = 33
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-; domain master = yes
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-; preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for
-# Windows95 workstations.
-; domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-; logon script = %m.bat
-# run a specific logon batch file per username
-; logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-# %L substitutes for this servers netbios name, %U is username
-# You must uncomment the [Profiles] share below
-; logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-; wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-; wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one WINS Server on the network. The default is NO.
-; wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
- dns proxy = no
-
-# These scripts are used on a domain controller or stand-alone
-# machine to add or delete corresponding unix accounts
-; add user script = /usr/sbin/useradd %u
-; add group script = /usr/sbin/groupadd %g
-; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-; delete user script = /usr/sbin/userdel %u
-; delete user from group script = /usr/sbin/deluser %u %g
-; delete group script = /usr/sbin/groupdel %g
-
-
-#============================ Share Definitions ==============================
-
-
diff --git a/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt
deleted file mode 100644
index f82f2d2..0000000
--- a/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-context action description keylist hostname
-Music FFWD Fast forward PgDown REPLACEME
-Music STOP Stop playback O REPLACEME
-Music MUTE Mute |,\\\\,F9 REPLACEME
-Gallery SCROLLUP Scroll image up 2 REPLACEME
-Music VOLUMEDOWN Volume down [,{,F10 REPLACEME
-Music VOLUMEUP Volume up ],},F11 REPLACEME
-qt DELETE Delete D REPLACEME
-Music RWND Rewind PgUp REPLACEME
-qt EDIT Edit E REPLACEME
-Music PAUSE Pause/Start playback P REPLACEME
-Gallery RECENTER Recenter image 5 REPLACEME
-Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME
-Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME
-Gallery SCROLLRIGHT Scroll image right 6 REPLACEME
-Gallery MENU Toggle activating menu in thumbnail view M REPLACEME
-Gallery SCROLLDOWN Scroll image down 8 REPLACEME
-Gallery ZOOMIN Zoom image in 9 REPLACEME
-Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME
-Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME
-Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME
-Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME
-Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME
-Gallery END Go to the last image in thumbnail view End REPLACEME
-Gallery HOME Go to the first image in thumbnail view Home REPLACEME
-Gallery SCROLLLEFT Scroll image left 4 REPLACEME
-Gallery PLAY Start/Stop Slideshow P REPLACEME
-NetFlix REMOVE Removes movie from queue D REPLACEME
-Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME
-Gallery ZOOMOUT Zoom image out 7 REPLACEME
-NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME
-Global DOWN Down Arrow Down REPLACEME
-ITV Menu MENUTEXT Menu Text F7 REPLACEME
-ITV Menu TEXTEXIT Menu Exit F6 REPLACEME
-Global LEFT Left Arrow Left REPLACEME
-Global RIGHT Right Arrow Right REPLACEME
-Global UP Up Arrow Up REPLACEME
-Global MENU Pop-up menu M REPLACEME
-Global PREVVIEW Previous View Home REPLACEME
-Global ESCAPE Escape Esc REPLACEME
-Global PAGEUP Page Up PgUp REPLACEME
-Global SELECT Select Return,Enter,Space REPLACEME
-Global HELP Help F1 REPLACEME
-Global INFO More information I REPLACEME
-Global NEXTVIEW Next View End REPLACEME
-ITV Menu MENUBLUE Menu Blue F5 REPLACEME
-Global PAGEDOWN Page Down PgDown REPLACEME
-Global EJECT Eject Removable Media REPLACEME
-Global 3 3 3 REPLACEME
-Global 1 1 1 REPLACEME
-Global 6 6 6 REPLACEME
-Global 0 0 0 REPLACEME
-Global 2 2 2 REPLACEME
-Global 4 4 4 REPLACEME
-TV Frontend DELETE Delete Program D REPLACEME
-Global 8 8 8 REPLACEME
-Global 7 7 7 REPLACEME
-TV Frontend PAGEDOWN Page Down 9 REPLACEME
-TV Frontend PAGEUP Page Up 3 REPLACEME
-Global 5 5 5 REPLACEME
-TV Frontend CHANGERECGROUP Change Recording Group REPLACEME
-Global 9 9 9 REPLACEME
-Video END Go to the last video End REPLACEME
-Video INCPARENT Increase Parental Level ],},F11 REPLACEME
-Weather PAUSE Pause current page P REPLACEME
-TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME
-Video BROWSE Change browsable in video manager B REPLACEME
-Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME
-Video HOME Go to the first video Home REPLACEME
-Video FILTER Open video filter dialog F REPLACEME
-Welcome STARTXTERM Open an Xterm window F12 REPLACEME
-Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
-Music BLANKSCR Blank screen 5 REPLACEME
-Video DELETE Delete video D REPLACEME
-Music THMBUP Increase rating 9 REPLACEME
-Music CYCLEVIS Cycle visualizer mode 6 REPLACEME
-Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME
-Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
-TV Frontend PLAYBACK Play Program P REPLACEME
-News FORCERETRIEVE Force update news items M REPLACEME
-Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME
-News RETRIEVENEWS Update news items I REPLACEME
-News CANCEL Cancel news item updating C REPLACEME
-Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME
-Teletext Menu MENUWHITE Menu White F6 REPLACEME
-ITV Menu MENURED Menu Red F2 REPLACEME
-ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME
-ITV Menu MENUGREEN Menu Green F3 REPLACEME
-Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME
-Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME
-Teletext Menu MENUGREEN Menu Green F3 REPLACEME
-Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME
-Teletext Menu MENUBLUE Menu Blue F5 REPLACEME
-Teletext Menu TOGGLETT Toggle Teletext T REPLACEME
-Teletext Menu NEXTPAGE Next Page Down REPLACEME
-TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME
-TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME
-TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME
-TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME
-Teletext Menu MENURED Menu Red F2 REPLACEME
-TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME
-Teletext Menu PREVPAGE Previous Page Up REPLACEME
-TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME
-TV Playback PLAY Play Ctrl+P REPLACEME
-TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME
-TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME
-TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME
-TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME
-TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME
-TV Playback FINDER Show the Program Finder # REPLACEME
-TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME
-TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME
-TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME
-TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME
-TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME
-TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME
-TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME
-TV Playback SPEEDINC Increase the playback speed U REPLACEME
-TV Playback STRETCHDEC Decrease time stretch speed REPLACEME
-TV Playback SPEEDDEC Decrease the playback speed J REPLACEME
-TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME
-TV Playback GUIDE Show the Program Guide S REPLACEME
-TV Playback JUMPPREV Jump to previously played recording REPLACEME
-TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME
-TV Playback STRETCHINC Increase time stretch speed REPLACEME
-TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME
-TV Playback PREVCC708 Previous ATSC CC track REPLACEME
-TV Playback NEXTCC708 Next ATSC CC track REPLACEME
-TV Playback NEXTCC Next of any captions REPLACEME
-TV Playback NEXTSCAN Next video scan overidemode REPLACEME
-TV Playback NEXTCC608 Next VBI CC track REPLACEME
-TV Playback PREVCC608 Previous VBI CC track REPLACEME
-TV Playback PREVAUDIO Previous audio track - REPLACEME
-TV Playback PREVSUBTITLE Previous subtitle track REPLACEME
-TV Playback NEXTSUBTITLE Next subtitle track REPLACEME
-TV Playback NEXTAUDIO Next audio track + REPLACEME
-TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME
-TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME
-TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME
-TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME
-TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME
-TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME
-TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME
-TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME
-TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME
-TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME
-TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME
-TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME
-TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME
-TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME
-TV Playback SWAPPIP Swap PiP/Main N REPLACEME
-TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME
-TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME
-TV Playback TOGGLECC608 Toggle VBI CC REPLACEME
-TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME
-TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
-TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME
-TV Playback MUTE Mute |,\\\\,F9 REPLACEME
-TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME
-TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME
-TV Playback VOLUMEUP Volume up ],},F11 REPLACEME
-TV Playback TOGGLECC Toggle any captions T REPLACEME
-TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME
-TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME
-TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME
-TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME
-TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME
-TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME
-TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME
-TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME
-TV Playback JUMPFFWD Jump ahead PgDown REPLACEME
-TV Playback PREVCHAN Switch to the previous channel H REPLACEME
-TV Playback JUMPBKMRK Jump to bookmark K REPLACEME
-TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME
-TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME
-TV Playback JUMPRWND Jump back PgUp REPLACEME
-TV Playback SEEKRWND Rewind Left REPLACEME
-TV Playback SEEKFFWD Fast Forward Right REPLACEME
-TV Playback CHANNELDOWN Channel down Down REPLACEME
-TV Playback CHANNELUP Channel up Up REPLACEME
-TV Playback ARBSEEK Arbitrary Seek * REPLACEME
-TV Playback DELETE Delete Program D REPLACEME
-TV Playback CLEAROSD Clear OSD Backspace REPLACEME
-TV Frontend DETAILS Show program details U REPLACEME
-TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME
-TV Frontend UPCOMING List upcoming episodes O REPLACEME
-TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME
-TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME
-TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME
-TV Playback PAUSE Pause P REPLACEME
-TV Frontend RANKINC Increase program or channel rank Right REPLACEME
-TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME
-TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME
-TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME
-Gallery DELETE Delete marked images or current image if none are marked D REPLACEME
-TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME
-Gallery MARK Mark image T REPLACEME
-Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME
-TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
-TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME
-Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME
-Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
-Music DELETE Delete track from playlist D REPLACEME
-Gallery INFO Toggle Showing Information about Image I REPLACEME
-Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
-Music REFRESH Refresh music tree 8 REPLACEME
-Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME
-Music FILTER Filter All My Music F REPLACEME
-Music THMBDOWN Decrease rating 7 REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_1/settings.txt b/abs/core-testing/live-installer/templates/settings/default_1/settings.txt
deleted file mode 100644
index 8c3a391..0000000
--- a/abs/core-testing/live-installer/templates/settings/default_1/settings.txt
+++ /dev/null
@@ -1,320 +0,0 @@
-value data hostname
-AC3PassThru 0 REPLACEME
-AggressiveSoundcardBuffer 0 REPLACEME
-AllowQuitShutdown 3 REPLACEME
-AltClearSavedPosition 1 REPLACEME
-AspectOverride 0 REPLACEME
-AudioNag 1 REPLACEME
-AudioOutputDevice /dev/dsp REPLACEME
-AutoCommercialSkip 2 REPLACEME
-AutoLookupCD 1 REPLACEME
-AutomaticSetWatched 0 REPLACEME
-AutoPlayCD 0 REPLACEME
-BackendServerPort 6543 REPLACEME
-BackendStatusPort 6544 REPLACEME
-CCBackground 0 REPLACEME
-CDBlankType fast REPLACEME
-CDCreateDir 1 REPLACEME
-CDDevice /dev/cdrom REPLACEME
-CDDiskSize 1 REPLACEME
-CDWriterEnabled 0 REPLACEME
-CDWriteSpeed 0 REPLACEME
-ChannelFormat <num> <sign> REPLACEME
-ChannelOrdering channum REPLACEME
-chanPerPage 5 REPLACEME
-ClearSavedPosition 1 REPLACEME
-CommNotifyAmount 0 REPLACEME
-CommRewindAmount 0 REPLACEME
-CustomFilters REPLACEME
-DateFormat ddd MMM d REPLACEME
-DecodeExtraAudio 1 REPLACEME
-Default MythVideo View 1 REPLACEME
-DefaultCCMode 0 REPLACEME
-DefaultRipQuality 0 REPLACEME
-DefaultTVChannel 3 REPLACEME
-Deinterlace 1 REPLACEME
-DeinterlaceFilter kerneldeint REPLACEME
-DisplayGroupDefaultView 0 REPLACEME
-DisplayGroupTitleSort 0 REPLACEME
-DisplayRecGroup Default REPLACEME
-DispRecGroupAsAllProg 0 REPLACEME
-DTSPassThru 0 REPLACEME
-DVDDeviceLocation /dev/dvd REPLACEME
-DVDOnInsertDVD 1 REPLACEME
-DVDRipLocation /data/media/tmp REPLACEME
-EjectCDAfterRipping 1 REPLACEME
-EnableMHEG 0 REPLACEME
-EnableXbox 0 REPLACEME
-EnableXbox 0 REPLACEME
-EncoderType ogg REPLACEME
-EndOfRecordingExitPrompt 1 REPLACEME
-EPGFillType 10 REPLACEME
-EPGScrollType 1 REPLACEME
-EPGShowCategoryColors 1 REPLACEME
-EPGShowCategoryText 1 REPLACEME
-EPGShowChannelIcon 1 REPLACEME
-EPGShowFavorites 0 REPLACEME
-ExactSeeking 0 REPLACEME
-FFRewReposTime 100 REPLACEME
-FFRewReverse 1 REPLACEME
-FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME
-GalleryDir /data/media/images REPLACEME
-GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME
-GalleryMoviePlayerCmd mplayer -fs %s REPLACEME
-GalleryOverlayCaption 0 REPLACEME
-GalleryRecursiveSlideshow 1 REPLACEME
-GallerySortOrder 20 REPLACEME
-GalleryThumbnailLocation 1 REPLACEME
-GameAllTreeLevels system gamename REPLACEME
-GameFavTreeLevels gamename REPLACEME
-GeneratePreviewPixmaps 0 REPLACEME
-GuiHeight 0 REPLACEME
-GuiOffsetX 0 REPLACEME
-GuiOffsetY 0 REPLACEME
-GuiSizeForTV 0 REPLACEME
-GuiVidModeResolution 640x480 REPLACEME
-GuiWidth 0 REPLACEME
-HideMouseCursor 1 REPLACEME
-HorizScanPercentage 0 REPLACEME
-Ignore_ID3 0 REPLACEME
-IndividualMuteControl 0 REPLACEME
-IntelliLastPlayWeight 25 REPLACEME
-IntelliPlayCountWeight 25 REPLACEME
-IntelliRandomWeight 15 REPLACEME
-IntelliRatingWeight 35 REPLACEME
-ISO639Language0 eng REPLACEME
-ISO639Language1 eng REPLACEME
-JobAllowCommFlag 1 REPLACEME
-JobAllowTranscode 1 REPLACEME
-JobQueueCheckFrequency 60 REPLACEME
-JobQueueCPU 0 REPLACEME
-JobQueueMaxSimultaneousJobs 1 REPLACEME
-JobQueueWindowEnd 23:59 REPLACEME
-JobQueueWindowStart 00:00 REPLACEME
-KeyboardAccelerators 1 REPLACEME
-Language EN REPLACEME
-LastMusicPlaylistPush 0 REPLACEME
-LCDBacklightOn 1 REPLACEME
-LCDBigClock 0 REPLACEME
-LCDEnable 0 REPLACEME
-LCDHeartBeatOn 0 REPLACEME
-LCDKeyString ABCDEF REPLACEME
-LCDPopupTime 5 REPLACEME
-LCDShowChannel 1 REPLACEME
-LCDShowGeneric 1 REPLACEME
-LCDShowMenu 1 REPLACEME
-LCDShowMusic 1 REPLACEME
-LCDShowMusicItems ArtistTitle REPLACEME
-LCDShowRecStatus 0 REPLACEME
-LCDShowTime 1 REPLACEME
-LCDShowVolume 1 REPLACEME
-LircKeyPressedApp REPLACEME
-ListAsShuffled 0 REPLACEME
-LiveTVInAllPrograms 0 REPLACEME
-LogCleanDays 14 REPLACEME
-LogCleanDays 14 REPLACEME
-LogCleanEnabled 0 REPLACEME
-LogCleanEnabled 0 REPLACEME
-LogCleanMax 30 REPLACEME
-LogCleanMax 30 REPLACEME
-LogCleanPeriod 14 REPLACEME
-LogCleanPeriod 14 REPLACEME
-LogMaxCount 100 REPLACEME
-LogMaxCount 100 REPLACEME
-LogPrintLevel 8 REPLACEME
-LogPrintLevel 8 REPLACEME
-LongChannelFormat <num> <name> REPLACEME
-MasterMixerVolume 70 REPLACEME
-MenuTheme MythVantage-menu REPLACEME
-MixerControl PCM REPLACEME
-MixerDevice /dev/mixer REPLACEME
-MonitorDrives 0 REPLACEME
-MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME
-MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME
-MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME
-Mp3UseVBR 0 REPLACEME
-MTDac3Flag 0 REPLACEME
-MTDConcurrentTranscodes 1 REPLACEME
-MTDLogFlag 0 REPLACEME
-MTDNiceLevel 20 REPLACEME
-MTDPort 2442 REPLACEME
-MTDRipSize 0 REPLACEME
-MTDxvidFlag 1 REPLACEME
-MusicAudioDevice default REPLACEME
-MusicLocation /data/media/audio REPLACEME
-MusicShowRatings 0 REPLACEME
-MythArchiveAlwaysUseMythTranscode 1 REPLACEME
-MythArchiveChapterMenuAR Video REPLACEME
-MythArchiveCopyRemoteFiles 1 REPLACEME
-MythArchiveDateFormat %a %b %d REPLACEME
-MythArchiveDvdauthorCmd dvdauthor REPLACEME
-MythArchiveDVDLocation /dev/dvd REPLACEME
-MythArchiveEncodeToAc3 1 REPLACEME
-MythArchiveFfmpegCmd ffmpeg REPLACEME
-MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME
-MythArchiveGrowisofsCmd growisofs REPLACEME
-MythArchiveMainMenuAR 16:9 REPLACEME
-MythArchiveMkisofsCmd mkisofs REPLACEME
-MythArchiveMpeg2encCmd mpeg2enc REPLACEME
-MythArchiveMplexCmd mplex REPLACEME
-MythArchivePng2yuvCmd png2yuv REPLACEME
-MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME
-MythArchiveSpumuxCmd spumux REPLACEME
-MythArchiveTcrequantCmd tcrequant REPLACEME
-MythArchiveTempDir /data/media/tmp REPLACEME
-MythArchiveTimeFormat %I:%M %p REPLACEME
-MythArchiveUseFIFO 1 REPLACEME
-MythArchiveVideoFormat NTSC REPLACEME
-MythControlsVolume 1 REPLACEME
-mythdvd.DVDPlayerCommand Internal REPLACEME
-mythvideo.db_folder_view 1 REPLACEME
-mythvideo.ImageCacheSize 50 REPLACEME
-mythvideo.sort_ignores_case 1 REPLACEME
-NetworkControlEnabled 1 REPLACEME
-NetworkControlPort 6546 REPLACEME
-NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME
-NoPromptOnExit 0 REPLACEME
-NoWhitespace 0 REPLACEME
-OnlyImportNewMusic 0 REPLACEME
-OSDCC708CapitalsFont FreeMono.ttf REPLACEME
-OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME
-OSDCC708CasualFont FreeMono.ttf REPLACEME
-OSDCC708CasualItalicFont FreeMono.ttf REPLACEME
-OSDCC708CursiveFont FreeMono.ttf REPLACEME
-OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME
-OSDCC708DefaultFontType MonoSerif REPLACEME
-OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME
-OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708MonoSerifFont FreeMono.ttf REPLACEME
-OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME
-OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708PropSerifFont FreeMono.ttf REPLACEME
-OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708TextZoom 100 REPLACEME
-OSDCCFont FreeMono.ttf REPLACEME
-OSDFont FreeMono.ttf REPLACEME
-OSDGeneralTimeout 2 REPLACEME
-OSDNotifyTimeout 6 REPLACEME
-OSDProgramInfoTimeout 3 REPLACEME
-OSDTheme Gray-OSD REPLACEME
-OSDThemeFontSizeType default REPLACEME
-ParanoiaLevel Full REPLACEME
-PassThruOutputDevice Default REPLACEME
-PCMMixerVolume 70 REPLACEME
-PersistentBrowseMode 1 REPLACEME
-PIPLocation 0 REPLACEME
-PlaybackBoxStartInTitle 1 REPLACEME
-PlaybackExitPrompt 2 REPLACEME
-PlaybackPreview 1 REPLACEME
-PlaybackPreviewLowCPU 1 REPLACEME
-PlayBoxEpisodeSort Date REPLACEME
-PlayBoxOrdering 1 REPLACEME
-PlayBoxShading 0 REPLACEME
-PlayBoxTransparency 1 REPLACEME
-PlayMode none REPLACEME
-PostCDRipScript REPLACEME
-PreferredMPEG2Decoder ffmpeg REPLACEME
-PreviewFromBookmark 1 REPLACEME
-PVR350EPGAlphaValue 164 REPLACEME
-PVR350InternalAudioOnly 0 REPLACEME
-PVR350OutputEnable 0 REPLACEME
-PVR350VideoDev /dev/video16 REPLACEME
-QtFontBig 25 REPLACEME
-QtFontMedium 16 REPLACEME
-QtFontSmall 12 REPLACEME
-QueryInitialFilter 0 REPLACEME
-RandomTheme 0 REPLACEME
-RealtimePriority 1 REPLACEME
-RecordFilePrefix /data/media/video/recordings REPLACEME
-RememberRecGroup 1 REPLACEME
-RepeatMode all REPLACEME
-RunFrontendInWindow 0 REPLACEME
-SelChangeRecThreshold 16 REPLACEME
-SelectChangesChannel 1 REPLACEME
-ServiceMythWEB 0 REPLACEME
-ServiceNFS 0 REPLACEME
-ServiceSamba 0 REPLACEME
-SetupPinCodeRequired 0 REPLACEME
-ShortDateFormat M/d REPLACEME
-ShowGroupInfo 0 REPLACEME
-ShowWholeTree 1 REPLACEME
-SlideshowBackground REPLACEME
-SlideshowDelay 5 REPLACEME
-SlideshowOpenGLTransition none REPLACEME
-SlideshowOpenGLTransitionLength 2000 REPLACEME
-SlideshowTransition none REPLACEME
-SmartChannelChange 0 REPLACEME
-SmartForward 0 REPLACEME
-StickyKeys 1 REPLACEME
-Style Windows REPLACEME
-SubTitleCommand -sid %s REPLACEME
-TagSeparator - REPLACEME
-Theme basic-blue REPLACEME
-ThemeFontSizeType default REPLACEME
-ThemePainter qt REPLACEME
-TimeFormat h:mm AP REPLACEME
-timePerPage 4 REPLACEME
-TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME
-TranscodeCommand transcode REPLACEME
-TreeLevels splitartist artist album title REPLACEME
-TVVidModeForceAspect 0.0 REPLACEME
-TVVidModeForceAspect0 0.0 REPLACEME
-TVVidModeForceAspect1 0.0 REPLACEME
-TVVidModeForceAspect2 0.0 REPLACEME
-TVVidModeRefreshRate 0 REPLACEME
-TVVidModeRefreshRate0 0 REPLACEME
-TVVidModeRefreshRate1 0 REPLACEME
-TVVidModeRefreshRate2 0 REPLACEME
-TVVidModeResolution 640x480 REPLACEME
-TVVidModeResolution0 640x480 REPLACEME
-TVVidModeResolution1 640x480 REPLACEME
-TVVidModeResolution2 640x480 REPLACEME
-UDPNotifyPort 6948 REPLACEME
-UnknownCategory Unknown REPLACEME
-UnknownTitle Unknown REPLACEME
-upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME
-UseArrowAccels 1 REPLACEME
-UseOutputPictureControls 1 REPLACEME
-UseVideoModes 0 REPLACEME
-UseVideoTimebase 0 REPLACEME
-UseVirtualKeyboard 1 REPLACEME
-VCDDeviceLocation /dev/cdrom REPLACEME
-VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME
-VertScanPercentage 0 REPLACEME
-VideoAggressivePC 0 REPLACEME
-VideoArtworkDir /data/media/images/posters REPLACEME
-VideoBrowserNoDB 0 REPLACEME
-VideoDefaultParentalLevel 4 REPLACEME
-VideoGalleryAspectRatio 1 REPLACEME
-VideoGalleryColsPerPage 4 REPLACEME
-VideoGalleryNoDB 0 REPLACEME
-VideoGalleryRowsPerPage 3 REPLACEME
-VideoGallerySubtitle 1 REPLACEME
-VideoListUnknownFiletypes 1 REPLACEME
-VideoNewBrowsable 1 REPLACEME
-VideoDefaultPlayer Internal REPLACEME
-VideoStartupDir /data/media/video/movies REPLACEME
-VideoTreeLoadMetaData 1 REPLACEME
-VideoTreeNoDB 0 REPLACEME
-VidModeHeight0 0 REPLACEME
-VidModeHeight1 0 REPLACEME
-VidModeHeight2 0 REPLACEME
-VidModeWidth0 0 REPLACEME
-VidModeWidth1 0 REPLACEME
-VidModeWidth2 0 REPLACEME
-VisualCycleOnSongChange 0 REPLACEME
-VisualMode Random REPLACEME
-VisualModeDelay 0 REPLACEME
-VisualScaleHeight 1 REPLACEME
-VisualScaleWidth 1 REPLACEME
-WatchTVGuide 0 REPLACEME
-WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME
-WebBrowserHideScrollbars 0 REPLACEME
-WebBrowserScrollMode 1 REPLACEME
-WebBrowserScrollSpeed 4 REPLACEME
-WebBrowserZoomLevel 20 REPLACEME
-XScanDisplacement 0 REPLACEME
-YScanDisplacement 0 REPLACEME
-HaltCommand sudo /sbin/poweroff REPLACEME
-RebootCommand sudo /sbin/reboot REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt
deleted file mode 100644
index f82f2d2..0000000
--- a/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-context action description keylist hostname
-Music FFWD Fast forward PgDown REPLACEME
-Music STOP Stop playback O REPLACEME
-Music MUTE Mute |,\\\\,F9 REPLACEME
-Gallery SCROLLUP Scroll image up 2 REPLACEME
-Music VOLUMEDOWN Volume down [,{,F10 REPLACEME
-Music VOLUMEUP Volume up ],},F11 REPLACEME
-qt DELETE Delete D REPLACEME
-Music RWND Rewind PgUp REPLACEME
-qt EDIT Edit E REPLACEME
-Music PAUSE Pause/Start playback P REPLACEME
-Gallery RECENTER Recenter image 5 REPLACEME
-Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME
-Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME
-Gallery SCROLLRIGHT Scroll image right 6 REPLACEME
-Gallery MENU Toggle activating menu in thumbnail view M REPLACEME
-Gallery SCROLLDOWN Scroll image down 8 REPLACEME
-Gallery ZOOMIN Zoom image in 9 REPLACEME
-Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME
-Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME
-Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME
-Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME
-Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME
-Gallery END Go to the last image in thumbnail view End REPLACEME
-Gallery HOME Go to the first image in thumbnail view Home REPLACEME
-Gallery SCROLLLEFT Scroll image left 4 REPLACEME
-Gallery PLAY Start/Stop Slideshow P REPLACEME
-NetFlix REMOVE Removes movie from queue D REPLACEME
-Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME
-Gallery ZOOMOUT Zoom image out 7 REPLACEME
-NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME
-Global DOWN Down Arrow Down REPLACEME
-ITV Menu MENUTEXT Menu Text F7 REPLACEME
-ITV Menu TEXTEXIT Menu Exit F6 REPLACEME
-Global LEFT Left Arrow Left REPLACEME
-Global RIGHT Right Arrow Right REPLACEME
-Global UP Up Arrow Up REPLACEME
-Global MENU Pop-up menu M REPLACEME
-Global PREVVIEW Previous View Home REPLACEME
-Global ESCAPE Escape Esc REPLACEME
-Global PAGEUP Page Up PgUp REPLACEME
-Global SELECT Select Return,Enter,Space REPLACEME
-Global HELP Help F1 REPLACEME
-Global INFO More information I REPLACEME
-Global NEXTVIEW Next View End REPLACEME
-ITV Menu MENUBLUE Menu Blue F5 REPLACEME
-Global PAGEDOWN Page Down PgDown REPLACEME
-Global EJECT Eject Removable Media REPLACEME
-Global 3 3 3 REPLACEME
-Global 1 1 1 REPLACEME
-Global 6 6 6 REPLACEME
-Global 0 0 0 REPLACEME
-Global 2 2 2 REPLACEME
-Global 4 4 4 REPLACEME
-TV Frontend DELETE Delete Program D REPLACEME
-Global 8 8 8 REPLACEME
-Global 7 7 7 REPLACEME
-TV Frontend PAGEDOWN Page Down 9 REPLACEME
-TV Frontend PAGEUP Page Up 3 REPLACEME
-Global 5 5 5 REPLACEME
-TV Frontend CHANGERECGROUP Change Recording Group REPLACEME
-Global 9 9 9 REPLACEME
-Video END Go to the last video End REPLACEME
-Video INCPARENT Increase Parental Level ],},F11 REPLACEME
-Weather PAUSE Pause current page P REPLACEME
-TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME
-Video BROWSE Change browsable in video manager B REPLACEME
-Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME
-Video HOME Go to the first video Home REPLACEME
-Video FILTER Open video filter dialog F REPLACEME
-Welcome STARTXTERM Open an Xterm window F12 REPLACEME
-Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
-Music BLANKSCR Blank screen 5 REPLACEME
-Video DELETE Delete video D REPLACEME
-Music THMBUP Increase rating 9 REPLACEME
-Music CYCLEVIS Cycle visualizer mode 6 REPLACEME
-Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME
-Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
-TV Frontend PLAYBACK Play Program P REPLACEME
-News FORCERETRIEVE Force update news items M REPLACEME
-Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME
-News RETRIEVENEWS Update news items I REPLACEME
-News CANCEL Cancel news item updating C REPLACEME
-Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME
-Teletext Menu MENUWHITE Menu White F6 REPLACEME
-ITV Menu MENURED Menu Red F2 REPLACEME
-ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME
-ITV Menu MENUGREEN Menu Green F3 REPLACEME
-Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME
-Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME
-Teletext Menu MENUGREEN Menu Green F3 REPLACEME
-Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME
-Teletext Menu MENUBLUE Menu Blue F5 REPLACEME
-Teletext Menu TOGGLETT Toggle Teletext T REPLACEME
-Teletext Menu NEXTPAGE Next Page Down REPLACEME
-TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME
-TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME
-TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME
-TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME
-Teletext Menu MENURED Menu Red F2 REPLACEME
-TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME
-Teletext Menu PREVPAGE Previous Page Up REPLACEME
-TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME
-TV Playback PLAY Play Ctrl+P REPLACEME
-TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME
-TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME
-TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME
-TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME
-TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME
-TV Playback FINDER Show the Program Finder # REPLACEME
-TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME
-TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME
-TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME
-TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME
-TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME
-TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME
-TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME
-TV Playback SPEEDINC Increase the playback speed U REPLACEME
-TV Playback STRETCHDEC Decrease time stretch speed REPLACEME
-TV Playback SPEEDDEC Decrease the playback speed J REPLACEME
-TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME
-TV Playback GUIDE Show the Program Guide S REPLACEME
-TV Playback JUMPPREV Jump to previously played recording REPLACEME
-TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME
-TV Playback STRETCHINC Increase time stretch speed REPLACEME
-TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME
-TV Playback PREVCC708 Previous ATSC CC track REPLACEME
-TV Playback NEXTCC708 Next ATSC CC track REPLACEME
-TV Playback NEXTCC Next of any captions REPLACEME
-TV Playback NEXTSCAN Next video scan overidemode REPLACEME
-TV Playback NEXTCC608 Next VBI CC track REPLACEME
-TV Playback PREVCC608 Previous VBI CC track REPLACEME
-TV Playback PREVAUDIO Previous audio track - REPLACEME
-TV Playback PREVSUBTITLE Previous subtitle track REPLACEME
-TV Playback NEXTSUBTITLE Next subtitle track REPLACEME
-TV Playback NEXTAUDIO Next audio track + REPLACEME
-TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME
-TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME
-TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME
-TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME
-TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME
-TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME
-TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME
-TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME
-TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME
-TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME
-TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME
-TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME
-TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME
-TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME
-TV Playback SWAPPIP Swap PiP/Main N REPLACEME
-TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME
-TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME
-TV Playback TOGGLECC608 Toggle VBI CC REPLACEME
-TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME
-TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
-TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME
-TV Playback MUTE Mute |,\\\\,F9 REPLACEME
-TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME
-TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME
-TV Playback VOLUMEUP Volume up ],},F11 REPLACEME
-TV Playback TOGGLECC Toggle any captions T REPLACEME
-TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME
-TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME
-TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME
-TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME
-TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME
-TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME
-TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME
-TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME
-TV Playback JUMPFFWD Jump ahead PgDown REPLACEME
-TV Playback PREVCHAN Switch to the previous channel H REPLACEME
-TV Playback JUMPBKMRK Jump to bookmark K REPLACEME
-TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME
-TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME
-TV Playback JUMPRWND Jump back PgUp REPLACEME
-TV Playback SEEKRWND Rewind Left REPLACEME
-TV Playback SEEKFFWD Fast Forward Right REPLACEME
-TV Playback CHANNELDOWN Channel down Down REPLACEME
-TV Playback CHANNELUP Channel up Up REPLACEME
-TV Playback ARBSEEK Arbitrary Seek * REPLACEME
-TV Playback DELETE Delete Program D REPLACEME
-TV Playback CLEAROSD Clear OSD Backspace REPLACEME
-TV Frontend DETAILS Show program details U REPLACEME
-TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME
-TV Frontend UPCOMING List upcoming episodes O REPLACEME
-TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME
-TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME
-TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME
-TV Playback PAUSE Pause P REPLACEME
-TV Frontend RANKINC Increase program or channel rank Right REPLACEME
-TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME
-TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME
-TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME
-Gallery DELETE Delete marked images or current image if none are marked D REPLACEME
-TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME
-Gallery MARK Mark image T REPLACEME
-Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME
-TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME
-TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME
-Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME
-Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME
-Music DELETE Delete track from playlist D REPLACEME
-Gallery INFO Toggle Showing Information about Image I REPLACEME
-Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME
-Music REFRESH Refresh music tree 8 REPLACEME
-Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME
-Music FILTER Filter All My Music F REPLACEME
-Music THMBDOWN Decrease rating 7 REPLACEME
diff --git a/abs/core-testing/live-installer/templates/settings/default_2/settings.txt b/abs/core-testing/live-installer/templates/settings/default_2/settings.txt
deleted file mode 100644
index 106be04..0000000
--- a/abs/core-testing/live-installer/templates/settings/default_2/settings.txt
+++ /dev/null
@@ -1,320 +0,0 @@
-value data hostname
-AC3PassThru 0 REPLACEME
-AggressiveSoundcardBuffer 0 REPLACEME
-AllowQuitShutdown 3 REPLACEME
-AltClearSavedPosition 1 REPLACEME
-AspectOverride 0 REPLACEME
-AudioNag 1 REPLACEME
-AudioOutputDevice /dev/dsp REPLACEME
-AutoCommercialSkip 2 REPLACEME
-AutoLookupCD 1 REPLACEME
-AutomaticSetWatched 0 REPLACEME
-AutoPlayCD 0 REPLACEME
-BackendServerPort 6543 REPLACEME
-BackendStatusPort 6544 REPLACEME
-CCBackground 0 REPLACEME
-CDBlankType fast REPLACEME
-CDCreateDir 1 REPLACEME
-CDDevice /dev/cdrom REPLACEME
-CDDiskSize 1 REPLACEME
-CDWriterEnabled 0 REPLACEME
-CDWriteSpeed 0 REPLACEME
-ChannelFormat <num> <sign> REPLACEME
-ChannelOrdering channum REPLACEME
-chanPerPage 5 REPLACEME
-ClearSavedPosition 1 REPLACEME
-CommNotifyAmount 0 REPLACEME
-CommRewindAmount 0 REPLACEME
-CustomFilters REPLACEME
-DateFormat ddd MMM d REPLACEME
-DecodeExtraAudio 1 REPLACEME
-Default MythVideo View 1 REPLACEME
-DefaultCCMode 0 REPLACEME
-DefaultRipQuality 0 REPLACEME
-DefaultTVChannel 3 REPLACEME
-Deinterlace 1 REPLACEME
-DeinterlaceFilter kerneldeint REPLACEME
-DisplayGroupDefaultView 0 REPLACEME
-DisplayGroupTitleSort 0 REPLACEME
-DisplayRecGroup Default REPLACEME
-DispRecGroupAsAllProg 0 REPLACEME
-DTSPassThru 0 REPLACEME
-DVDDeviceLocation /dev/dvd REPLACEME
-DVDOnInsertDVD 1 REPLACEME
-DVDRipLocation /data/media/tmp REPLACEME
-EjectCDAfterRipping 1 REPLACEME
-EnableMHEG 0 REPLACEME
-EnableXbox 0 REPLACEME
-EnableXbox 0 REPLACEME
-EncoderType ogg REPLACEME
-EndOfRecordingExitPrompt 1 REPLACEME
-EPGFillType 10 REPLACEME
-EPGScrollType 1 REPLACEME
-EPGShowCategoryColors 1 REPLACEME
-EPGShowCategoryText 1 REPLACEME
-EPGShowChannelIcon 1 REPLACEME
-EPGShowFavorites 0 REPLACEME
-ExactSeeking 0 REPLACEME
-FFRewReposTime 100 REPLACEME
-FFRewReverse 1 REPLACEME
-FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME
-GalleryDir /data/media/images REPLACEME
-GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME
-GalleryMoviePlayerCmd mplayer -fs %s REPLACEME
-GalleryOverlayCaption 0 REPLACEME
-GalleryRecursiveSlideshow 1 REPLACEME
-GallerySortOrder 20 REPLACEME
-GalleryThumbnailLocation 1 REPLACEME
-GameAllTreeLevels system gamename REPLACEME
-GameFavTreeLevels gamename REPLACEME
-GeneratePreviewPixmaps 0 REPLACEME
-GuiHeight 0 REPLACEME
-GuiOffsetX 0 REPLACEME
-GuiOffsetY 0 REPLACEME
-GuiSizeForTV 0 REPLACEME
-GuiVidModeResolution 640x480 REPLACEME
-GuiWidth 0 REPLACEME
-HaltCommand halt REPLACEME
-HideMouseCursor 1 REPLACEME
-HorizScanPercentage 0 REPLACEME
-Ignore_ID3 0 REPLACEME
-IndividualMuteControl 0 REPLACEME
-IntelliLastPlayWeight 25 REPLACEME
-IntelliPlayCountWeight 25 REPLACEME
-IntelliRandomWeight 15 REPLACEME
-IntelliRatingWeight 35 REPLACEME
-ISO639Language0 eng REPLACEME
-ISO639Language1 eng REPLACEME
-JobAllowCommFlag 1 REPLACEME
-JobAllowTranscode 1 REPLACEME
-JobQueueCheckFrequency 60 REPLACEME
-JobQueueCPU 0 REPLACEME
-JobQueueMaxSimultaneousJobs 1 REPLACEME
-JobQueueWindowEnd 23:59 REPLACEME
-JobQueueWindowStart 00:00 REPLACEME
-KeyboardAccelerators 1 REPLACEME
-Language EN REPLACEME
-LastMusicPlaylistPush 0 REPLACEME
-LCDBacklightOn 1 REPLACEME
-LCDBigClock 0 REPLACEME
-LCDEnable 0 REPLACEME
-LCDHeartBeatOn 0 REPLACEME
-LCDKeyString ABCDEF REPLACEME
-LCDPopupTime 5 REPLACEME
-LCDShowChannel 1 REPLACEME
-LCDShowGeneric 1 REPLACEME
-LCDShowMenu 1 REPLACEME
-LCDShowMusic 1 REPLACEME
-LCDShowMusicItems ArtistTitle REPLACEME
-LCDShowRecStatus 0 REPLACEME
-LCDShowTime 1 REPLACEME
-LCDShowVolume 1 REPLACEME
-LircKeyPressedApp REPLACEME
-ListAsShuffled 0 REPLACEME
-LiveTVInAllPrograms 0 REPLACEME
-LogCleanDays 14 REPLACEME
-LogCleanDays 14 REPLACEME
-LogCleanEnabled 0 REPLACEME
-LogCleanEnabled 0 REPLACEME
-LogCleanMax 30 REPLACEME
-LogCleanMax 30 REPLACEME
-LogCleanPeriod 14 REPLACEME
-LogCleanPeriod 14 REPLACEME
-LogMaxCount 100 REPLACEME
-LogMaxCount 100 REPLACEME
-LogPrintLevel 8 REPLACEME
-LogPrintLevel 8 REPLACEME
-LongChannelFormat <num> <name> REPLACEME
-MasterMixerVolume 70 REPLACEME
-MenuTheme STB-menu REPLACEME
-MixerControl PCM REPLACEME
-MixerDevice /dev/mixer REPLACEME
-MonitorDrives 0 REPLACEME
-MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME
-MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME
-MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME
-Mp3UseVBR 0 REPLACEME
-MTDac3Flag 0 REPLACEME
-MTDConcurrentTranscodes 1 REPLACEME
-MTDLogFlag 0 REPLACEME
-MTDNiceLevel 20 REPLACEME
-MTDPort 2442 REPLACEME
-MTDRipSize 0 REPLACEME
-MTDxvidFlag 1 REPLACEME
-MusicAudioDevice default REPLACEME
-MusicLocation /data/media/audio REPLACEME
-MusicShowRatings 0 REPLACEME
-MythArchiveAlwaysUseMythTranscode 1 REPLACEME
-MythArchiveChapterMenuAR Video REPLACEME
-MythArchiveCopyRemoteFiles 1 REPLACEME
-MythArchiveDateFormat %a %b %d REPLACEME
-MythArchiveDvdauthorCmd dvdauthor REPLACEME
-MythArchiveDVDLocation /dev/dvd REPLACEME
-MythArchiveEncodeToAc3 1 REPLACEME
-MythArchiveFfmpegCmd ffmpeg REPLACEME
-MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME
-MythArchiveGrowisofsCmd growisofs REPLACEME
-MythArchiveMainMenuAR 16:9 REPLACEME
-MythArchiveMkisofsCmd mkisofs REPLACEME
-MythArchiveMpeg2encCmd mpeg2enc REPLACEME
-MythArchiveMplexCmd mplex REPLACEME
-MythArchivePng2yuvCmd png2yuv REPLACEME
-MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME
-MythArchiveSpumuxCmd spumux REPLACEME
-MythArchiveTcrequantCmd tcrequant REPLACEME
-MythArchiveTempDir /data/media/tmp REPLACEME
-MythArchiveTimeFormat %I:%M %p REPLACEME
-MythArchiveUseFIFO 1 REPLACEME
-MythArchiveVideoFormat NTSC REPLACEME
-MythControlsVolume 1 REPLACEME
-mythdvd.DVDPlayerCommand Internal REPLACEME
-mythvideo.db_folder_view 1 REPLACEME
-mythvideo.ImageCacheSize 50 REPLACEME
-mythvideo.sort_ignores_case 1 REPLACEME
-NetworkControlEnabled 1 REPLACEME
-NetworkControlPort 6546 REPLACEME
-NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME
-NoPromptOnExit 0 REPLACEME
-NoWhitespace 0 REPLACEME
-OnlyImportNewMusic 0 REPLACEME
-OSDCC708CapitalsFont FreeMono.ttf REPLACEME
-OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME
-OSDCC708CasualFont FreeMono.ttf REPLACEME
-OSDCC708CasualItalicFont FreeMono.ttf REPLACEME
-OSDCC708CursiveFont FreeMono.ttf REPLACEME
-OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME
-OSDCC708DefaultFontType MonoSerif REPLACEME
-OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME
-OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708MonoSerifFont FreeMono.ttf REPLACEME
-OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME
-OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708PropSerifFont FreeMono.ttf REPLACEME
-OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME
-OSDCC708TextZoom 100 REPLACEME
-OSDCCFont FreeMono.ttf REPLACEME
-OSDFont FreeMono.ttf REPLACEME
-OSDGeneralTimeout 2 REPLACEME
-OSDNotifyTimeout 6 REPLACEME
-OSDProgramInfoTimeout 3 REPLACEME
-OSDTheme Gray-OSD REPLACEME
-OSDThemeFontSizeType default REPLACEME
-ParanoiaLevel Full REPLACEME
-PassThruOutputDevice Default REPLACEME
-PCMMixerVolume 70 REPLACEME
-PersistentBrowseMode 1 REPLACEME
-PIPLocation 0 REPLACEME
-PlaybackBoxStartInTitle 1 REPLACEME
-PlaybackExitPrompt 2 REPLACEME
-PlaybackPreview 1 REPLACEME
-PlaybackPreviewLowCPU 1 REPLACEME
-PlayBoxEpisodeSort Date REPLACEME
-PlayBoxOrdering 1 REPLACEME
-PlayBoxShading 0 REPLACEME
-PlayBoxTransparency 1 REPLACEME
-PlayMode none REPLACEME
-PostCDRipScript REPLACEME
-PreferredMPEG2Decoder ffmpeg REPLACEME
-PreviewFromBookmark 1 REPLACEME
-PVR350EPGAlphaValue 164 REPLACEME
-PVR350InternalAudioOnly 0 REPLACEME
-PVR350OutputEnable 0 REPLACEME
-PVR350VideoDev /dev/video16 REPLACEME
-QtFontBig 25 REPLACEME
-QtFontMedium 16 REPLACEME
-QtFontSmall 12 REPLACEME
-QueryInitialFilter 0 REPLACEME
-RandomTheme 0 REPLACEME
-RealtimePriority 1 REPLACEME
-RecordFilePrefix /data/media/video/recordings REPLACEME
-RememberRecGroup 1 REPLACEME
-RepeatMode all REPLACEME
-RunFrontendInWindow 0 REPLACEME
-SelChangeRecThreshold 16 REPLACEME
-SelectChangesChannel 1 REPLACEME
-ServiceMythWEB 0 REPLACEME
-ServiceNFS 0 REPLACEME
-ServiceSamba 0 REPLACEME
-SetupPinCodeRequired 0 REPLACEME
-ShortDateFormat M/d REPLACEME
-ShowGroupInfo 0 REPLACEME
-ShowWholeTree 1 REPLACEME
-SlideshowBackground REPLACEME
-SlideshowDelay 5 REPLACEME
-SlideshowOpenGLTransition none REPLACEME
-SlideshowOpenGLTransitionLength 2000 REPLACEME
-SlideshowTransition none REPLACEME
-SmartChannelChange 0 REPLACEME
-SmartForward 0 REPLACEME
-StickyKeys 1 REPLACEME
-Style REPLACEME
-SubTitleCommand -sid %s REPLACEME
-TagSeparator - REPLACEME
-Theme basic-blue REPLACEME
-ThemeFontSizeType default REPLACEME
-ThemePainter qt REPLACEME
-TimeFormat h:mm AP REPLACEME
-timePerPage 4 REPLACEME
-TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME
-TranscodeCommand transcode REPLACEME
-TreeLevels splitartist artist album title REPLACEME
-TVVidModeForceAspect 0.0 REPLACEME
-TVVidModeForceAspect0 0.0 REPLACEME
-TVVidModeForceAspect1 0.0 REPLACEME
-TVVidModeForceAspect2 0.0 REPLACEME
-TVVidModeRefreshRate 0 REPLACEME
-TVVidModeRefreshRate0 0 REPLACEME
-TVVidModeRefreshRate1 0 REPLACEME
-TVVidModeRefreshRate2 0 REPLACEME
-TVVidModeResolution 640x480 REPLACEME
-TVVidModeResolution0 640x480 REPLACEME
-TVVidModeResolution1 640x480 REPLACEME
-TVVidModeResolution2 640x480 REPLACEME
-UDPNotifyPort 6948 REPLACEME
-UnknownCategory Unknown REPLACEME
-UnknownTitle Unknown REPLACEME
-upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME
-UseArrowAccels 1 REPLACEME
-UseDHCP 1 REPLACEME
-UseOutputPictureControls 1 REPLACEME
-UseVideoModes 0 REPLACEME
-UseVideoTimebase 0 REPLACEME
-UseVirtualKeyboard 1 REPLACEME
-VCDDeviceLocation /dev/cdrom REPLACEME
-VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME
-VertScanPercentage 0 REPLACEME
-VideoAggressivePC 0 REPLACEME
-VideoArtworkDir /data/media/images/posters REPLACEME
-VideoBrowserNoDB 0 REPLACEME
-VideoDefaultParentalLevel 4 REPLACEME
-VideoGalleryAspectRatio 1 REPLACEME
-VideoGalleryColsPerPage 4 REPLACEME
-VideoGalleryNoDB 0 REPLACEME
-VideoGalleryRowsPerPage 3 REPLACEME
-VideoGallerySubtitle 1 REPLACEME
-VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME
-VideoListUnknownFiletypes 1 REPLACEME
-VideoNewBrowsable 1 REPLACEME
-VideoStartupDir /data/media/video/movies REPLACEME
-VideoTreeLoadMetaData 1 REPLACEME
-VideoTreeNoDB 0 REPLACEME
-VidModeHeight0 0 REPLACEME
-VidModeHeight1 0 REPLACEME
-VidModeHeight2 0 REPLACEME
-VidModeWidth0 0 REPLACEME
-VidModeWidth1 0 REPLACEME
-VidModeWidth2 0 REPLACEME
-VisualCycleOnSongChange 0 REPLACEME
-VisualMode Random REPLACEME
-VisualModeDelay 0 REPLACEME
-VisualScaleHeight 1 REPLACEME
-VisualScaleWidth 1 REPLACEME
-WatchTVGuide 0 REPLACEME
-WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME
-WebBrowserHideScrollbars 0 REPLACEME
-WebBrowserScrollMode 1 REPLACEME
-WebBrowserScrollSpeed 4 REPLACEME
-WebBrowserZoomLevel 20 REPLACEME
-XScanDisplacement 0 REPLACEME
-YScanDisplacement 0 REPLACEME
diff --git a/abs/core-testing/live-installer/templates/sources/mv-core b/abs/core-testing/live-installer/templates/sources/mv-core
deleted file mode 100644
index f9f6c97..0000000
--- a/abs/core-testing/live-installer/templates/sources/mv-core
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-core
diff --git a/abs/core-testing/live-installer/templates/sources/mv-core-testing b/abs/core-testing/live-installer/templates/sources/mv-core-testing
deleted file mode 100644
index 1fce6ea..0000000
--- a/abs/core-testing/live-installer/templates/sources/mv-core-testing
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-core-testing
diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra b/abs/core-testing/live-installer/templates/sources/mv-extra
deleted file mode 100644
index e13640f..0000000
--- a/abs/core-testing/live-installer/templates/sources/mv-extra
+++ /dev/null
@@ -1,2 +0,0 @@
-#Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-extra
diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra-testing b/abs/core-testing/live-installer/templates/sources/mv-extra-testing
deleted file mode 100644
index c176add..0000000
--- a/abs/core-testing/live-installer/templates/sources/mv-extra-testing
+++ /dev/null
@@ -1,2 +0,0 @@
-##Begin official list of mirrors
-Server = http://www.mythvantage.com/repo/mv-extra-testing
diff --git a/abs/core-testing/live-installer/templates/sources/svc_pkg b/abs/core-testing/live-installer/templates/sources/svc_pkg
deleted file mode 100644
index c1efdcc..0000000
--- a/abs/core-testing/live-installer/templates/sources/svc_pkg
+++ /dev/null
@@ -1,3 +0,0 @@
-[svc_pkg]
-Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686
-
diff --git a/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
deleted file mode 100755
index 51db997..0000000
--- a/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf
+++ /dev/null
@@ -1,413 +0,0 @@
-#
-
-begin remote
-
- name Time_Warner_SA3250
- flags CONST_LENGTH|RAW_CODES
- eps 30
- aeps 100
-
- ptrail 0
- repeat 0 0
- gap 100240
- frequency 57600
-
- begin raw_codes
-
- name MUTE
- 972 802 971 802 1887 778
- 971 798 971 798 972 798
- 971 798 972 798 971 1677
- 972 802 1887 1656 992
-
- name POWER
- 3450 3229 894 2468 891 2468
- 893 778 892 2468 891 2469
- 917 2444 891 2468 892 2469
- 891 779 892 778 918 752
- 917 754 917 752 892 2471
- 889 779 892 779 892 777
- 892 779 892 777 868 2492
- 892 2469 891 2470 890
-
- name GUIDE
- 3397 3285 890 2470 840 2519
- 916 755 891 2470 839 2520
- 891 780 891 2474 860 2495
- 892 778 917 754 890 780
- 891 781 864 804 917 2443
- 865 805 891 779 866 2495
- 864 805 892 779 891 2469
- 865 2495 891 2469 866
-
-
- name INFO
- 3449 3231 918 2441 920 2440
- 920 750 947 2414 920 2440
- 920 750 894 777 919 750
- 947 2413 921 750 919 750
- 920 751 919 752 918 2441
- 921 749 895 776 919 2441
- 920 2440 920 2441 920 749
- 921 2439 921 2440 921
-
- name UP
- 3396 3285 915 2444 919 2442
- 918 752 916 2444 919 2441
- 919 751 916 2445 919 751
- 890 780 916 753 917 754
- 942 729 889 780 916 2445
- 919 751 915 756 914 2448
- 916 752 916 2444 918 2442
- 919 2441 918 2443 918
-
- name DOWN
- 3421 3261 890 2470 918 2442
- 919 751 916 2446 917 2441
- 919 2442 918 2442 918 752
- 916 2444 919 751 890 780
- 916 755 915 755 915 2445
- 919 753 914 755 889 781
- 889 781 916 2444 919 752
- 889 2471 919 2441 918
-
- name LEFT
- 3427 3255 918 2441 924 2437
- 920 750 918 2442 920 2441
- 919 2440 921 2439 921 750
- 919 751 944 726 919 752
- 917 753 918 751 944 2417
- 920 750 893 777 919 751
- 919 752 918 2441 921 2440
- 920 2440 920 2440 921
-
- name RIGHT
- 3424 3258 892 2466 921 2439
- 896 774 920 2441 920 2440
- 920 750 920 751 945 2414
- 921 750 919 751 920 750
- 919 752 919 751 919 2440
- 921 750 918 752 918 2442
- 920 2440 921 749 918 2443
- 920 2440 920 2441 919
-
- name SELECT
- 3424 3257 944 2416 919 2442
- 919 750 918 2442 920 2441
- 919 751 943 727 918 2442
- 920 2440 920 752 916 752
- 969 702 917 753 892 2468
- 919 751 892 778 918 2442
- 924 2436 921 750 917 753
- 918 2443 919 2441 919
-
- name SETTINGS
- 3402 3278 871 2491 921 2438
- 921 749 922 2440 919 2441
- 919 2440 921 749 921 750
- 895 2465 920 2440 921 2440
- 920 749 896 775 921 2439
- 920 749 923 748 895 775
- 922 2439 920 2440 920 749
- 897 774 896 774 921
-
- name EXIT
- 3400 3279 896 2464 921 2439
- 921 750 895 2465 921 2439
- 921 749 898 772 896 2465
- 920 2440 920 750 920 2441
- 920 749 896 774 870 2491
- 921 749 921 749 895 2465
- 921 2440 920 749 922 748
- 897 2464 920 750 896
-
- name PGUP
- 3425 3255 920 2440 920 2440
- 921 749 895 2466 920 2440
- 920 749 920 2441 896 2464
- 921 749 919 2445 917 2440
- 920 750 920 750 920 2441
- 921 748 921 749 920 2440
- 921 750 919 752 919 2440
- 921 749 921 750 919
-
- name PGDN
- 3400 3281 921 2438 921 2441
- 920 749 895 2465 896 2465
- 920 2440 920 2440 920 2440
- 921 749 896 2465 895 2465
- 920 750 895 775 920 2440
- 921 749 921 750 895 775
- 896 774 896 774 921 2439
- 921 749 921 751 894
-
- name VOLUP
- 995 778 1886 779 994 775
- 995 777 993 774 996 774
- 995 775 995 1654 1885 778
- 995 775 995 774 995
-
- name VOLDN
- 996 778 971 802 1862 803
- 970 799 996 774 995 774
- 996 774 995 1654 1886 778
- 996 773 971 1678 991
-
- name CHUP
- 3421 3259 916 2444 918 2443
- 918 751 917 2444 919 2441
- 919 2441 919 751 916 2444
- 919 2441 919 2443 918 751
- 941 729 916 755 917 2442
- 919 752 916 754 891 778
- 918 2444 918 751 916 754
- 917 753 916 2445 919
-
- name CHDN
- 3421 3260 915 2445 918 2442
- 919 751 891 2469 919 2441
- 927 745 915 2444 919 2441
- 919 2441 919 2442 918 752
- 915 755 890 780 917 2443
- 919 752 916 754 915 2445
- 919 751 915 755 890 781
- 914 756 916 2445 917
-
- name A
- 3425 3258 916 2442 920 2441
- 919 751 918 2442 919 2441
- 920 2440 920 2441 919 2441
- 919 2441 920 750 917 2443
- 920 751 917 752 919 2442
- 920 750 918 753 917 753
- 917 753 942 728 917 753
- 918 2442 920 750 942
-
- name B
- 3398 3283 916 2443 892 2470
- 892 778 892 2468 891 2475
- 886 779 916 754 892 777
- 892 778 919 2442 891 2468
- 918 753 892 778 891 2469
- 892 778 892 778 918 2443
- 891 2469 892 2467 893 2469
- 891 778 918 753 892
-
- name C
- 3396 3283 891 2469 892 2468
- 892 778 917 2444 892 2468
- 892 2469 891 778 892 779
- 893 777 892 2468 892 2468
- 918 752 893 777 892 2469
- 892 778 892 778 867 802
- 918 2444 917 2442 868 2492
- 893 778 892 779 916
-
- name 1
- 3424 3257 890 2470 865 2495
- 891 780 892 2468 865 2495
- 892 777 891 780 892 779
- 890 780 916 2444 865 805
- 891 779 917 753 916 2445
- 865 805 916 754 892 2469
- 865 2494 916 2445 865 2495
- 891 779 917 2443 866
-
- name 2
- 3422 3258 916 2444 865 2496
- 889 782 915 2444 865 2495
- 917 2444 839 830 891 780
- 915 755 890 2470 864 806
- 917 753 891 780 866 2495
- 864 805 891 779 892 779
- 865 2494 865 2496 891 2469
- 865 805 891 2469 865
-
- name 3
- 3397 3284 916 2443 892 2468
- 892 779 893 2467 892 2468
- 917 753 892 2469 891 778
- 893 778 891 2469 892 778
- 918 753 890 779 893 2468
- 891 779 893 778 891 2469
- 892 777 893 2468 891 2468
- 917 754 943 2417 892
-
- name 4
- 3421 3261 890 2470 839 2520
- 917 753 891 2470 865 2495
- 917 2443 865 2495 890 781
- 891 778 891 2470 865 804
- 895 776 892 779 891 2468
- 866 805 917 753 943 727
- 866 805 889 2471 865 2494
- 892 780 916 2444 865
-
- name 5
- 3396 3282 920 2441 892 2467
- 894 778 891 2468 892 2469
- 891 780 866 802 893 2470
- 890 779 918 2443 891 777
- 892 779 918 752 892 2468
- 892 779 918 752 918 2443
- 891 2469 891 779 891 2469
- 892 778 891 2468 893
-
- name 6
- 3396 3284 918 2442 866 2494
- 892 778 917 2444 866 2494
- 917 2444 865 804 893 2468
- 890 780 916 2445 890 779
- 892 779 891 778 918 2443
- 891 778 892 779 892 779
- 891 2468 892 778 919 2444
- 889 778 893 2468 891
-
- name 7
- 3398 3282 893 2467 892 2468
- 893 779 891 2469 891 2468
- 919 752 892 2467 892 2469
- 891 779 892 2468 892 777
- 893 778 918 752 892 2468
- 893 779 916 753 918 2442
- 892 779 891 778 893 2468
- 892 778 893 2467 892
-
- name 8
- 3448 3232 892 2468 866 2494
- 892 779 892 2467 867 2494
- 891 2469 866 2495 891 2469
- 865 805 968 2394 864 804
- 918 753 891 779 892 2468
- 866 804 917 754 891 780
- 916 752 917 754 892 2469
- 865 804 893 2468 890
-
- name 9
- 3422 3258 891 2469 839 2521
- 891 780 892 2468 824 2536
- 916 754 916 755 891 779
- 866 2494 839 2522 891 778
- 892 778 890 781 915 2448
- 837 831 891 779 890 2470
- 837 2523 942 2418 838 832
- 892 778 890 2471 839
-
- name 0
- 3398 3284 891 2469 890 2469
- 893 779 891 2468 892 2468
- 892 2468 892 778 892 779
- 891 2469 892 2468 893 778
- 892 777 893 777 893 2469
- 891 778 892 779 868 802
- 917 2443 892 2469 890 779
- 891 779 892 2468 893
-
- name LAST
- 3422 3258 891 2471 916 2443
- 891 780 891 2469 272 3088
- 865 805 916 2445 308 3052
- 890 2469 892 779 915 756
- 889 781 889 780 890 2471
- 890 779 889 781 891 2471
- 272 1397 890 779 891 781
- 890 2469 448 2912 917
-
- name FAV
- 3423 3257 918 2442 944 2417
- 917 753 892 2469 890 2471
- 324 3036 890 2469 379 289
- 167 2525 891 2470 379 2981
- 890 780 378 270 242 781
- 866 806 889 2469 786 884
- 891 779 891 779 892 779
- 916 754 890 779 892 778
- 891 2470 839
-
- name REW
- 3420 3258 916 2445 326 3033
- 891 780 916 2443 891 2469
- 916 2445 838 831 918 754
- 890 2471 837 832 916 2444
- 838 832 891 779 916 2445
- 838 831 892 779 890 780
- 892 2469 839 2520 891 780
- 915 2444 836 836 890
-
- name PLAY
- 3448 3233 916 2444 891 2469
- 917 753 892 2468 918 2443
- 941 2420 891 2468 917 754
- 915 755 914 2446 918 2443
- 916 754 916 753 945 2416
- 943 727 941 729 918 752
- 917 753 919 2442 916 2444
- 915 755 943 728 916
-
- name FF
- 3420 3259 917 2442 946 2415
- 918 752 916 2445 918 2441
- 943 728 917 753 942 728
- 892 2470 864 806 889 2471
- 865 805 918 752 916 2443
- 944 726 892 779 891 2470
- 891 2469 915 2445 917 753
- 890 2471 222 1447 891
-
- name PAUSE
- 3421 3259 891 2470 787 2573
- 890 780 916 2444 840 2520
- 892 2468 864 806 917 2444
- 839 831 890 780 891 779
- 891 780 891 779 889 2471
- 839 831 916 755 915 754
- 892 2469 839 830 917 2444
- 840 2521 891 2469 840
-
- name STOP
- 3398 3284 889 2471 325 3036
- 891 779 890 2470 395 290
- 140 2535 889 781 890 781
- 889 2470 274 1397 891 2470
- 272 3087 917 754 890 780
- 889 2472 293 1377 890 779
- 916 2444 448 2913 916 754
- 866 2495 325 1344 891 779
- 915
-
- name REC
- 3421 3258 917 2444 916 2444
- 942 729 942 2420 889 2469
- 992 2367 942 730 891 2468
- 917 754 916 2443 892 2470
- 892 777 916 754 892 2467
- 943 730 916 754 891 779
- 917 2442 917 754 943 2417
- 918 753 915 754 892
-
- name BYPASS
- 3450 3231 891 2470 890 2470
- 917 753 916 2447 913 2445
- 273 3088 889 780 890 2470
- 891 2469 916 755 890 780
- 942 727 918 752 916 2444
- 890 782 916 754 865 805
- 891 2469 891 780 889 781
- 891 2468 259 3102 866
-
- name TV/VCR
- 19945 3915 612 1873 560 1926
- 560 1925 561 931 560 931
- 587 905 559 931 563 931
- 557 932 561 1925 585 908
- 583 1901 559 931 586 905
- 585 907 610 1875 561 1924
- 561 1926 559 1926 535 1951
- 559 1925 586 907 585 1899
- 560 931 1048 7898 3707 3862
- 587 1899 586 1899 586 1900
- 559 932 586 908 323
-
- end raw_codes
-
- end remote
diff --git a/abs/core-testing/live-installer/templates/xine.config.template b/abs/core-testing/live-installer/templates/xine.config.template
deleted file mode 100644
index 966487f..0000000
--- a/abs/core-testing/live-installer/templates/xine.config.template
+++ /dev/null
@@ -1,754 +0,0 @@
-#
-# xine config file
-#
-.version:2
-
-# Entries which are still set to their default values are commented out.
-# Remove the '#' at the beginning of the line, if you want to change them.
-
-# Enable deinterlacing by default
-# bool, default: 0
-#gui.deinterlace_by_default:0
-
-# Configuration experience level
-# { Beginner Advanced Expert Master of the known universe }, default: 0
-gui.experience_level:Expert
-
-# Enable OSD support
-# bool, default: 1
-#gui.osd_enabled:1
-
-# Dismiss OSD time (s)
-# numeric, default: 3
-#gui.osd_timeout:3
-
-# Ask user for playback with unsupported codec
-# bool, default: 0
-#gui.play_anyway:0
-
-# Automatically reload old playlist
-# bool, default: 0
-#gui.playlist_auto_reload:0
-
-# Audio visualization plugin
-# { oscope fftscope fftgraph goom }, default: 0
-gui.post_audio_plugin:fftgraph
-
-# gui skin theme
-# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4
-gui.skin:KeramicRH8
-
-# Change xine's behavior for unexperienced user
-# bool, default: 1
-#gui.smart_mode:1
-
-# Snapshot location
-# string, default: /home/jams
-#gui.snapshotdir:/home/jams
-
-# Display splash screen
-# bool, default: 1
-gui.splash:0
-
-# Subtitle autoloading
-# bool, default: 1
-#gui.subtitle_autoload:1
-
-# Visual animation style
-# { None Post Plugin Stream Animation }, default: 1
-#gui.visual_anim:Post Plugin
-
-# Windows stacking (more)
-# bool, default: 0
-#gui.always_layer_above:0
-
-# Audio mixer control method
-# { Sound card Software }, default: 0
-#gui.audio_mixer_method:Sound card
-
-# Visiblility behavior of panel
-# bool, default: 0
-#gui.auto_panel_visibility:0
-
-# Visibility behavior of output window
-# bool, default: 0
-#gui.auto_video_output_visibility:0
-
-# Deinterlace plugin.
-# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
-#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
-
-# Event sender behavior
-# bool, default: 1
-#gui.eventer_sticky:1
-
-# Windows stacking
-# bool, default: 0
-#gui.layer_above:0
-
-# Use unscaled OSD
-# bool, default: 1
-gui.osd_use_unscaled:0
-
-# Screensaver reset interval (s)
-# numeric, default: 10
-#gui.screensaver_timeout:10
-
-# Menu shortcut style
-# { Windows style Emacs style }, default: 0
-#gui.shortcut_style:Windows style
-
-# Stream information
-# bool, default: 0
-#gui.sinfo_auto_update:0
-
-# Skin Server Url
-# string, default: http://xine.sourceforge.net/skins/skins.slx
-#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx
-
-# Chapter hopping
-# bool, default: 1
-#gui.skip_by_chapter:1
-
-# New stream sizes resize output window
-# bool, default: 1
-#gui.stream_resize_window:1
-
-# Tips timeout (ms)
-# numeric, default: 5000
-#gui.tips_timeout:5000
-
-# gui tips visibility
-# bool, default: 1
-#gui.tips_visible:1
-
-# Name of video display
-# string, default:
-#gui.video_display:
-
-# Synchronized X protocol (debug)
-# bool, default: 0
-#gui.xsynchronize:0
-
-# Double size for small streams (require stream_resize_window)
-# bool, default: 0
-#gui.zoom_small_stream:0
-
-# Logo mrl
-# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv
-#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv
-
-# use XVidModeExtension when switching to fullscreen
-# bool, default: 0
-#gui.use_xvidext:0
-
-# height for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_height:-8192
-
-# width for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_width:-8192
-
-# x coordinate for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_x:-8192
-
-# y coordinate for xinerama fullscreen (-8192 = autodetect)
-# numeric, default: -8192
-#gui.xinerama_fullscreen_y:-8192
-
-# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3)
-# string, default: 0 1
-#gui.xinerama_use_screens:0 1
-
-# Amplification level
-# [0..200], default: 100
-#gui.amp_level:100
-
-# gui panel visibility
-# bool, default: 1
-gui.panel_visible:0
-
-# numeric, default: 200
-gui.panel_x:21
-
-# numeric, default: 100
-gui.panel_y:1050
-
-gui.control_x:186
-
-gui.control_y:46
-
-gui.dropped_frames_warning:0
-
-gui.eventer_x:1041
-
-gui.eventer_y:781
-
-gui.mrl_browser_x:23
-
-gui.mrl_browser_y:9
-
-gui.setup_x:717
-
-gui.setup_y:227
-
-gui.viewlog_x:200
-
-gui.viewlog_y:210
-
-# color specification yuv-opacity
-# string, default: 8080c0-f
-#gui.osdmenu.color_focused_button:8080c0-f
-
-# color specification yuv-opacity
-# string, default: 808080-f
-#gui.osdmenu.color_focused_slider:808080-f
-
-# color specification yuv-opacity
-# string, default: ff8080-f
-#gui.osdmenu.color_focused_slider_knob:ff8080-f
-
-# color specification yuv-opacity
-# string, default: 808080-f
-#gui.osdmenu.color_focused_text_border:808080-f
-
-# color specification yuv-opacity
-# string, default: ff8080-f
-#gui.osdmenu.color_focused_text_foreground:ff8080-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_label_border:0080c0-f
-
-# color specification yuv-opacity
-# string, default: c08080-f
-#gui.osdmenu.color_label_foreground:c08080-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_label_window:0080c0-f
-
-# color specification yuv-opacity
-# string, default: 008000-f
-#gui.osdmenu.color_slider:008000-f
-
-# color specification yuv-opacity
-# string, default: ffff00-f
-#gui.osdmenu.color_slider_knob:ffff00-f
-
-# color specification yuv-opacity
-# string, default: 008000-f
-#gui.osdmenu.color_text_border:008000-f
-
-# color specification yuv-opacity
-# string, default: ffff00-f
-#gui.osdmenu.color_text_foreground:ffff00-f
-
-# color specification yuv-opacity
-# string, default: 0080c0-f
-#gui.osdmenu.color_text_window:0080c0-f
-
-# directory a media in dvd device will be mounted
-# string, default: /dvd
-#gui.osdmenu.dvd_mountpoint:/dvd
-
-# palette (foreground-border-background) to use for subtitles and OSD
-# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0
-#ui.osd.text_palette:white-black-transparent
-
-# audio driver to use
-# { auto null alsa oss esd file none }, default: 0
-audio.driver:oss
-
-# a/v sync method to use by OSS
-# { auto getodelay getoptr softsync probebuffer }, default: 0
-#audio.oss_sync_method:auto
-
-# use A/52 dynamic range compression
-# bool, default: 0
-#audio.a52.dynamic_range:0
-
-# downmix audio to 2 channel surround stereo
-# bool, default: 0
-#audio.a52.surround_downmix:0
-
-# A/52 volume
-# [0..200], default: 100
-#audio.a52.level:100
-
-# OSS audio device name
-# { auto /dev/dsp /dev/sound/dsp }, default: 0
-#audio.device.oss_device_name:auto
-
-# OSS audio device number, -1 for none
-# numeric, default: -1
-#audio.device.oss_device_number:-1
-
-# OSS audio mixer number, -1 for none
-# numeric, default: -1
-#audio.device.oss_mixer_number:-1
-
-audio.device.alsa_front_device:default
-
-# speaker arrangement
-# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1
-#audio.output.speaker_arrangement:Stereo 2.0
-
-# offset for digital passthrough
-# numeric, default: 0
-#audio.synchronization.passthrough_offset:0
-
-# play audio even on slow/fast speeds
-# bool, default: 0
-#audio.synchronization.slow_fast_audio:0
-
-# method to sync audio and video
-# { metronom feedback resample }, default: 0
-#audio.synchronization.av_sync_method:metronom feedback
-
-# always resample to this rate (0 to disable)
-# numeric, default: 0
-#audio.synchronization.force_rate:0
-
-# enable resampling
-# { auto off on }, default: 0
-#audio.synchronization.resample_mode:auto
-
-# startup audio volume
-# [0..100], default: 50
-#audio.volume.mixer_volume:50
-
-# restore volume level at startup
-# bool, default: 0
-#audio.volume.remember_volume:0
-
-# video driver to use
-# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0
-#video.driver:auto
-
-# pitch alignment workaround
-# bool, default: 0
-#video.device.xv_pitch_alignment:0
-
-# disable exact alpha blending of overlays
-# bool, default: 0
-#video.output.disable_exact_alphablend:0
-
-# disable all video scaling
-# bool, default: 0
-#video.output.disable_scaling:0
-
-# horizontal image position in the output window
-# [0..100], default: 50
-#video.output.horizontal_position:50
-
-# vertical image position in the output window
-# [0..100], default: 50
-#video.output.vertical_position:50
-
-# deinterlace method (deprecated)
-# { none bob weave greedy onefield onefield_xv linearblend }, default: 4
-video.output.xv_deinterlace_method:linearblend
-
-# MPEG-4 postprocessing quality
-# [0..6], default: 3
-#video.processing.ffmpeg_pp_quality:3
-
-# DXR3 device number
-# numeric, default: 0
-#dxr3.device_number:0
-
-# swap odd and even lines
-# bool, default: 0
-#dxr3.encoding.swap_fields:0
-
-# add black bars to correct aspect ratio
-# bool, default: 1
-#dxr3.encoding.add_bars:1
-
-# use smooth play mode for mpeg encoder playback
-# bool, default: 1
-#dxr3.encoding.alt_play_mode:1
-
-# device used for CD audio
-# string, default: /dev/cdrom
-#media.audio_cd.device:/dev/cdrom
-
-# slow down disc drive to this speed factor
-# numeric, default: 4
-#media.audio_cd.drive_slowdown:4
-
-# query CDDB
-# bool, default: 1
-#media.audio_cd.use_cddb:1
-
-# CDDB cache directory
-# string, default: /home/jams/.xine/cddbcache
-#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache
-
-# CDDB server port
-# numeric, default: 8880
-#media.audio_cd.cddb_port:8880
-
-# CDDB server name
-# string, default: freedb.freedb.org
-#media.audio_cd.cddb_server:freedb.freedb.org
-
-# directory for saving streams
-# string, default:
-#media.capture.save_dir:
-
-# Number of dvb card to use.
-# numeric, default: 0
-#media.dvb.adapter:0
-
-# Remember last DVB channel watched
-# bool, default: 1
-#media.dvb.remember_channel:1
-
-# Last DVB channel viewed
-# numeric, default: -1
-#media.dvb.last_channel:-1
-
-# default language for DVD playback
-# string, default: en
-#media.dvd.language:en
-
-# region the DVD player claims to be in (1 to 8)
-# numeric, default: 1
-#media.dvd.region:1
-
-# device used for DVD playback
-# string, default: /dev/dvd
-#media.dvd.device:/dev/dvd
-
-# raw device set up for DVD access
-# string, default: /dev/rdvd
-#media.dvd.raw_device:/dev/rdvd
-
-# read-ahead caching
-# bool, default: 1
-#media.dvd.readahead:1
-
-# CSS decryption method
-# { key disc title }, default: 0
-#media.dvd.css_decryption_method:key
-
-# play mode when title/chapter is given
-# { entire dvd one chapter }, default: 0
-#media.dvd.play_single_chapter:entire dvd
-
-# unit for seeking
-# { seek in program chain seek in program }, default: 0
-#media.dvd.seek_behaviour:seek in program chain
-
-# unit for the skip action
-# { skip program skip part skip title }, default: 0
-#media.dvd.skip_behaviour:skip program
-
-# path to the title key cache
-# string, default: /home/jams/.dvdcss/
-#media.dvd.css_cache_path:/home/jams/.dvdcss/
-
-# file browsing start location
-# string, default: /home/jams
-#media.files.origin_path:/home/jams
-
-# list hidden files
-# bool, default: 0
-#media.files.show_hidden_files:0
-
-# network bandwidth
-# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10
-#media.network.bandwidth:1.5 Mbps (T1)
-
-# Timeout for network stream reading (in seconds)
-# numeric, default: 30
-#media.network.timeout:30
-
-# Domains for which to ignore the HTTP proxy
-# string, default:
-#media.network.http_no_proxy:
-
-# HTTP proxy host
-# string, default:
-#media.network.http_proxy_host:
-
-# HTTP proxy password
-# string, default:
-#media.network.http_proxy_password:
-
-# HTTP proxy port
-# numeric, default: 80
-#media.network.http_proxy_port:80
-
-# HTTP proxy username
-# string, default:
-#media.network.http_proxy_user:
-
-# MMS protocol
-# { auto TCP HTTP }, default: 0
-#media.network.mms_protocol:auto
-
-# automatically advance VCD track/entry
-# bool, default: 1
-#media.vcd.autoadvance:1
-
-# VCD default type to use on autoplay
-# { MPEG track entry segment playback-control item }, default: 3
-#media.vcd.autoplay:playback-control item
-
-# CD-ROM drive used for VCD when none given
-# string, default:
-#media.vcd.device:
-
-# VCD position slider range
-# { auto track entry }, default: 0
-#media.vcd.length_reporting:auto
-
-# show 'rejected' VCD LIDs
-# bool, default: 0
-#media.vcd.show_rejected:0
-
-# VCD format string for stream comment field
-# string, default: %P - Track %T
-#media.vcd.comment_format:%P - Track %T
-
-# VCD debug flag mask
-# numeric, default: 0
-#media.vcd.debug:0
-
-# VCD format string for display banner
-# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
-#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A
-
-# v4l radio device
-# string, default: /dev/v4l/radio0
-#media.video4linux.radio_device:/dev/v4l/radio0
-
-# v4l video device
-# string, default: /dev/v4l/video0
-#media.video4linux.video_device:/dev/v4l/video0
-
-# device used for WinTV-PVR 250/350 (pvr plugin)
-# string, default: /dev/video0
-#media.wintv_pvr.device:/dev/video0
-
-# path to RealPlayer codecs
-# string, default: /usr/lib/win32
-#decoder.external.real_codecs_path:/usr/lib/win32
-
-# path to Win32 codecs
-# string, default: /usr/lib/win32
-#decoder.external.win32_codecs_path:/usr/lib/win32
-
-# subtitle size
-# { tiny small normal large very large huge }, default: 1
-#subtitles.separate.subtitle_size:small
-
-# subtitle vertical offset
-# numeric, default: 0
-#subtitles.separate.vertical_offset:0
-
-# font for subtitles
-# string, default: sans
-#subtitles.separate.font:sans
-
-# encoding of the subtitles
-# string, default: iso-8859-1
-#subtitles.separate.src_encoding:iso-8859-1
-
-# use unscaled OSD if possible
-# bool, default: 1
-#subtitles.separate.use_unscaled_osd:1
-
-# default duration of subtitle display in seconds
-# numeric, default: 4
-#subtitles.separate.timeout:4
-
-# frames per second to generate
-# numeric, default: 14
-#effects.goom.fps:14
-
-# goom image height
-# numeric, default: 240
-#effects.goom.height:240
-
-# goom image width
-# numeric, default: 320
-#effects.goom.width:320
-
-# colorspace conversion method
-# { Fast but not photorealistic Slow but looks better }, default: 0
-#effects.goom.csc_method:Fast but not photorealistic
-
-# number of audio buffers
-# numeric, default: 230
-#engine.buffers.audio_num_buffers:230
-
-# number of video buffers
-# numeric, default: 500
-#engine.buffers.video_num_buffers:500
-
-# default number of video frames
-# numeric, default: 15
-#engine.buffers.video_num_frames:15
-
-# priority for a/52 decoder
-# numeric, default: 0
-#engine.decoder_priorities.a/52:0
-
-# priority for bitplane decoder
-# numeric, default: 0
-#engine.decoder_priorities.bitplane:0
-
-# priority for dts decoder
-# numeric, default: 0
-#engine.decoder_priorities.dts:0
-
-# priority for dvaudio decoder
-# numeric, default: 0
-#engine.decoder_priorities.dvaudio:0
-
-# priority for dxr3-mpeg2 decoder
-# numeric, default: 0
-#engine.decoder_priorities.dxr3-mpeg2:0
-
-# priority for dxr3-spudec decoder
-# numeric, default: 0
-#engine.decoder_priorities.dxr3-spudec:0
-
-# priority for faad decoder
-# numeric, default: 0
-#engine.decoder_priorities.faad:0
-
-# priority for ffmpeg-wmv8 decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpeg-wmv8:0
-
-# priority for ffmpeg-wmv9 decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpeg-wmv9:0
-
-# priority for ffmpegaudio decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpegaudio:0
-
-# priority for ffmpegvideo decoder
-# numeric, default: 0
-#engine.decoder_priorities.ffmpegvideo:0
-
-# priority for gdkpixbuf decoder
-# numeric, default: 0
-#engine.decoder_priorities.gdkpixbuf:0
-
-# priority for gsm610 decoder
-# numeric, default: 0
-#engine.decoder_priorities.gsm610:0
-
-# priority for image decoder
-# numeric, default: 0
-#engine.decoder_priorities.image:0
-
-# priority for mad decoder
-# numeric, default: 0
-#engine.decoder_priorities.mad:0
-
-# priority for mpc decoder
-# numeric, default: 0
-#engine.decoder_priorities.mpc:0
-
-# priority for mpeg2 decoder
-# numeric, default: 0
-#engine.decoder_priorities.mpeg2:0
-
-# priority for nsf decoder
-# numeric, default: 0
-#engine.decoder_priorities.nsf:0
-
-# priority for pcm decoder
-# numeric, default: 0
-#engine.decoder_priorities.pcm:0
-
-# priority for qta decoder
-# numeric, default: 0
-#engine.decoder_priorities.qta:0
-
-# priority for qtv decoder
-# numeric, default: 0
-#engine.decoder_priorities.qtv:0
-
-# priority for real decoder
-# numeric, default: 0
-#engine.decoder_priorities.real:0
-
-# priority for realadec decoder
-# numeric, default: 0
-#engine.decoder_priorities.realadec:0
-
-# priority for rgb decoder
-# numeric, default: 0
-#engine.decoder_priorities.rgb:0
-
-# priority for spucc decoder
-# numeric, default: 0
-#engine.decoder_priorities.spucc:0
-
-# priority for spucmml decoder
-# numeric, default: 0
-#engine.decoder_priorities.spucmml:0
-
-# priority for spudec decoder
-# numeric, default: 0
-#engine.decoder_priorities.spudec:0
-
-# priority for spudvb decoder
-# numeric, default: 0
-#engine.decoder_priorities.spudvb:0
-
-# priority for sputext decoder
-# numeric, default: 0
-#engine.decoder_priorities.sputext:0
-
-# priority for theora decoder
-# numeric, default: 0
-#engine.decoder_priorities.theora:0
-
-# priority for vorbis decoder
-# numeric, default: 0
-#engine.decoder_priorities.vorbis:0
-
-# priority for win32a decoder
-# numeric, default: 0
-#engine.decoder_priorities.win32a:0
-
-# priority for win32v decoder
-# numeric, default: 0
-#engine.decoder_priorities.win32v:0
-
-# priority for yuv decoder
-# numeric, default: 0
-#engine.decoder_priorities.yuv:0
-
-# media format detection strategy
-# { default reverse content extension }, default: 0
-#engine.demux.strategy:default
-
-# memcopy method used by xine
-# { probe libc kernel mmx mmxext sse }, default: 0
-engine.performance.memcpy_method:libc
-
-# percentage of discarded frames to tolerate
-# numeric, default: 10
-#engine.performance.warn_discarded_threshold:10
-
-# percentage of skipped frames to tolerate
-# numeric, default: 10
-#engine.performance.warn_skipped_threshold:10
-
-# allow implicit changes to the configuration (e.g. by MRL)
-# bool, default: 0
-#misc.implicit_config:0
-
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.ATSC b/abs/core-testing/live-installer/templates/xorg/modeline.ATSC
deleted file mode 100644
index b2cd709..0000000
--- a/abs/core-testing/live-installer/templates/xorg/modeline.ATSC
+++ /dev/null
@@ -1,33 +0,0 @@
-ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750
-
-ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525
-
-ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync
-
-ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$
-
-ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$
-
-ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace
-
-ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace
-
-Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace
-
-Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace
-
-Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace
-
-Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace
-
-Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace
-
-Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace
-
-Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135
-
-Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace
-
-Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
-
-Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.DVD b/abs/core-testing/live-installer/templates/xorg/modeline.DVD
deleted file mode 100644
index 9e846d0..0000000
--- a/abs/core-testing/live-installer/templates/xorg/modeline.DVD
+++ /dev/null
@@ -1,9 +0,0 @@
-#DVD-NativeModes
-ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace
-ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace
-ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525
-ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.NTSC b/abs/core-testing/live-installer/templates/xorg/modeline.NTSC
deleted file mode 100644
index 5536c1b..0000000
--- a/abs/core-testing/live-installer/templates/xorg/modeline.NTSC
+++ /dev/null
@@ -1,10 +0,0 @@
-#Analog-RegularModes
-ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace
-ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525
-ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace
-ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525
-ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace
-ModeLine "Broadcast-59.94p" 483 484 492 525
-ModeLine "VHS-59.94i" 483 484 492 525 Interlace
-ModeLine "VHS-59.94p" 483 484 492 525
-
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.VESA b/abs/core-testing/live-installer/templates/xorg/modeline.VESA
deleted file mode 100644
index a026f64..0000000
--- a/abs/core-testing/live-installer/templates/xorg/modeline.VESA
+++ /dev/null
@@ -1,163 +0,0 @@
-# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
-
-# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
-
-# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
-ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
-
-# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
-ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
-
-# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
-ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
-
-# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
-ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
-
-# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
-ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
-
-# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
-ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
-
-# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
-ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
-
-# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
-ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
-
-# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
-ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
-
-# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
-ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
-
-# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
-ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
-
-# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
-ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
-
-# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
-ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
-
-# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
-ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
-
-# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
-ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
-
-# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
-ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
-
-# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
-ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
-
-# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
-ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
-
-# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
-ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
-
-# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
-ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
-
-# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
-ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
-
-# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
-ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
-# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
-ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
-ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
-ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
-
-# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
-ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
-
-# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
-ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
-
-# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
-ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
-
-# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
-ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
-
-# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
-ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
-
-# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
-ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
-
-# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
-ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
-
-# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
-ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
-
-# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
-ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
-
-# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
-ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
-
-# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
-ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
-
-# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
-ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
-
-# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
-ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
-
-# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
-ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
-
-# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
-ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
-
-# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
-ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
-
-# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
-ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
-
-# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
-ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
-
-# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
-ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
-
-# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
-ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
-
-# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
-ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
-
-# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
-ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
-
-# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
-ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
-
-# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
-ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
-
-# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
-ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
-
-# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
-ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
-
-# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
-ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
-
-# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
-ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.custom b/abs/core-testing/live-installer/templates/xorg/modeline.custom
deleted file mode 100644
index ca6d678..0000000
--- a/abs/core-testing/live-installer/templates/xorg/modeline.custom
+++ /dev/null
@@ -1 +0,0 @@
-ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati b/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati
deleted file mode 100644
index c6d9249..0000000
--- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati
+++ /dev/null
@@ -1,94 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "aticonfig-Screen[0]" 0 0
- InputDevice "Mouse0" "CorePointer"
- InputDevice "Keyboard0" "CoreKeyboard"
-EndSection
-
-Section "Files"
- RgbPath "/usr/share/X11/rgb"
- ModulePath "/usr/lib/xorg/modules"
- FontPath "/usr/share/fonts/misc"
- FontPath "/usr/share/fonts/75dpi"
- FontPath "/usr/share/fonts/100dpi"
- FontPath "/usr/share/fonts/TTF"
- FontPath "/usr/share/fonts/Type1"
-EndSection
-
-Section "Module"
- Load "xtrap"
- Load "dbe"
- Load "record"
- Load "extmod"
- Load "dri"
- Load "type1"
- Load "freetype"
-EndSection
-
-Section "InputDevice"
- Identifier "Keyboard0"
- Driver "kbd"
-EndSection
-
-Section "InputDevice"
- Identifier "Mouse0"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "Device" "/dev/input/mice"
- Option "ZAxisMapping" "4 5 6 7"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- VendorName "Monitor Vendor"
- ModelName "Monitor Model"
-EndSection
-
-Section "Monitor"
- Identifier "aticonfig-Monitor[0]"
-# HorizSync
-# VertRefresh
- Option "VendorName" "ATI Proprietary Driver"
- Option "ModelName" "Generic Autodetecting Monitor"
- Option "DPMS" "true"
-EndSection
-
-Section "Device"
-
- ### Available Driver options are:-
- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
- ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "ShadowFB" # [<bool>]
- #Option "DefaultRefresh" # [<bool>]
- #Option "ModeSetClearScreen" # [<bool>]
- Identifier "Card0"
- Driver "vesa"
- VendorName "ATI Technologies Inc"
- BoardName "RV370 5B60 [Radeon X300 (PCIE)]"
- BusID "PCI:1:0:0"
-EndSection
-
-Section "Device"
- Identifier "aticonfig-Device[0]"
- Driver "fglrx"
-#INSERT HERE
-
-# Option "ForceMonitors" "tv,nocrt1,notmds1"
-# Option "TVStandard" "SCART"
-# Option "TVFormat" "PAL-B"
-EndSection
-
-
-Section "Screen"
- Identifier "aticonfig-Screen[0]"
- Device "aticonfig-Device[0]"
- Monitor "aticonfig-Monitor[0]"
- DefaultDepth 24
- SubSection "Display"
- Viewport 0 0
- Depth 24
- Modes "640x480"
- EndSubSection
-EndSection
-
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel b/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel
deleted file mode 100644
index a4d258a..0000000
--- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel
+++ /dev/null
@@ -1,148 +0,0 @@
-Section "ServerLayout"
- Identifier "Xorg Configured"
- Screen 0 "Screen0" 0 0
- InputDevice "Keyboard0" "CoreKeyboard"
- InputDevice "PS/2 Mouse" "CorePointer"
-# Serial Mouse not detected
-# USB Mouse not detected
-EndSection
-
-Section "ServerFlags"
- Option "AllowMouseOpenFail" "true"
-
-EndSection
-
-Section "Files"
- RgbPath "/usr/share/X11/rgb"
- ModulePath "/usr/lib/xorg/modules"
- FontPath "/usr/share/fonts/misc:unscaled"
- FontPath "/usr/share/fonts/misc"
- FontPath "/usr/share/fonts/75dpi:unscaled"
- FontPath "/usr/share/fonts/75dpi"
- FontPath "/usr/share/fonts/100dpi:unscaled"
- FontPath "/usr/share/fonts/100dpi"
- FontPath "/usr/share/fonts/PEX"
-# Additional fonts: Locale, Gimp, TTF...
- FontPath "/usr/share/fonts/cyrillic"
-# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
-# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
-# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
- FontPath "/usr/share/fonts/Type1"
- FontPath "/usr/share/fonts/ttf/western"
- FontPath "/usr/share/fonts/ttf/decoratives"
- FontPath "/usr/share/fonts/truetype"
- FontPath "/usr/share/fonts/truetype/openoffice"
- FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
- FontPath "/usr/share/fonts/latex-ttf-fonts"
- FontPath "/usr/share/fonts/defoma/CID"
- FontPath "/usr/share/fonts/defoma/TrueType"
-EndSection
-
-Section "Module"
- Load "ddc" # ddc probing of monitor
- Load "dbe"
- Load "dri"
- Load "extmod"
- Load "glx"
- Load "bitmap" # bitmap-fonts
- Load "type1"
- Load "freetype"
- Load "record"
-EndSection
-
-Section "InputDevice"
- Identifier "Keyboard0"
- Driver "keyboard"
- Option "CoreKeyboard"
- Option "XkbRules" "xorg"
- Option "XkbModel" "pc105"
- Option "XkbLayout" ""
- Option "XkbVariant" ""
-EndSection
-
-Section "InputDevice"
- Identifier "Serial Mouse"
- Driver "mouse"
- Option "Protocol" "Microsoft"
- Option "Device" "/dev/ttyS0"
- Option "Emulate3Buttons" "true"
- Option "Emulate3Timeout" "70"
- Option "SendCoreEvents" "true"
-EndSection
-
-Section "InputDevice"
- Identifier "PS/2 Mouse"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "ZAxisMapping" "4 5"
- Option "Device" "/dev/psaux"
- Option "Emulate3Buttons" "true"
- Option "Emulate3Timeout" "70"
- Option "SendCoreEvents" "true"
-EndSection
-
-Section "InputDevice"
- Identifier "USB Mouse"
- Driver "mouse"
- Option "Device" "/dev/input/mice"
- Option "SendCoreEvents" "true"
- Option "Protocol" "IMPS/2"
- Option "ZAxisMapping" "4 5"
- Option "Buttons" "5"
-EndSection
-
-# Auto-generated by Archie mkxcfg
-
-Section "Monitor"
- Identifier "Monitor0"
- Option "DPMS" "true"
-EndSection
-
-# Auto-generated by Archie mkxcfg
-
-Section "Device"
- Identifier "Card0"
- Driver "intel"
- VendorName "All"
- BoardName "All"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultColorDepth 16
- SubSection "Display"
- Depth 1
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 4
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 8
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 15
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 16
- Modes "800x600"
- virtual 800 600
- EndSubSection
- SubSection "Display"
- Depth 24
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
- SubSection "Display"
- Depth 32
- Modes "1024x768" "800x600" "640x480"
- EndSubSection
-EndSection
-
-Section "DRI"
- Mode 0666
-EndSection
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia b/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia
deleted file mode 100755
index dec0f42..0000000
--- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia
+++ /dev/null
@@ -1,90 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
-
-Section "ServerLayout"
- Identifier "Layout0"
- Screen 0 "Screen0"
- InputDevice "Keyboard0" "CoreKeyboard"
- InputDevice "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
- RgbPath "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
- Load "dbe"
- Load "extmod"
- Load "type1"
- Load "freetype"
- Load "glx"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Mouse0"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "Device" "/dev/psaux"
- Option "Emulate3Buttons" "no"
- Option "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Keyboard0"
- Driver "keyboard"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- VendorName "Unknown"
- ModelName "Unknown"
-# HorizSync
-# VertRefresh
- Option "DPMS" "false"
- DisplaySize 203 153
- Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
- Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
- ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
- Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
- ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-#INSERT MODELINE
-EndSection
-
-Section "Device"
- Identifier "Device0"
- Driver "nvidia"
- VendorName "NVIDIA Corporation"
- Option "DPI" "100 x 100"
- Option "NoLogo" "1"
-
-#INSERT HERE
-
-#END OPTIONS
-
-# Option "ConnectedMonitor" "DFP"
-# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled"
-# Option "DigitalVibrance" "0"
-# Option "TransparentIndex" "0"
-# Option "CursorShadowAlpha" "64"
-# Option "CursorShadowXOffset" "4"
-# Option "UseEdidFreqs" "True"
-# Option "NvAGP" "1"
-
-
-
-
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Device0"
- Monitor "Monitor0"
- DefaultDepth 24
- SubSection "Display"
- Depth 24
- Modes "1280x720"
- EndSubSection
-EndSection
-
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.via b/abs/core-testing/live-installer/templates/xorg/xorg.conf.via
deleted file mode 100644
index 6dd7821..0000000
--- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.via
+++ /dev/null
@@ -1,77 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
-
-Section "ServerLayout"
- Identifier "Layout0"
- Screen 0 "Screen0"
- InputDevice "Keyboard0" "CoreKeyboard"
- InputDevice "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
- RgbPath "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
- Load "dbe"
- Load "glx"
- Load "extmod"
- Load "type1"
- Load "freetype"
- Load "dri"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Mouse0"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "Device" "/dev/psaux"
- Option "Emulate3Buttons" "no"
- Option "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Keyboard0"
- Driver "keyboard"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- VendorName "Unknown"
- ModelName "Unknown"
- HorizSync 30.0 - 110.0
- VertRefresh 50.0 - 150.0
- Option "DPMS" "false"
- Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
- Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
- ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
- Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
- ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-EndSection
-
-Section "Device"
- Identifier "Device0"
- Driver "via"
- VendorName "via"
- Option "DPI" "100 x 100"
-
-
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Device0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Depth 16
- Modes "800x600"
- EndSubSection
-EndSection
-
-Section "DRI"
- Group "video"
- Mode 0666
- EndSection
diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware b/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware
deleted file mode 100755
index 843f2f4..0000000
--- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware
+++ /dev/null
@@ -1,72 +0,0 @@
-# nvidia-xconfig: X configuration file generated by nvidia-xconfig
-# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006
-
-Section "ServerLayout"
- Identifier "Layout0"
- Screen 0 "Screen0"
- InputDevice "Keyboard0" "CoreKeyboard"
- InputDevice "Mouse0" "CorePointer"
-EndSection
-
-Section "Files"
- RgbPath "/usr/X11R6/lib/X11/rgb"
-EndSection
-
-Section "Module"
- Load "dbe"
- Load "extmod"
- Load "type1"
- Load "freetype"
- Load "glx"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Mouse0"
- Driver "mouse"
- Option "Protocol" "auto"
- Option "Device" "/dev/psaux"
- Option "Emulate3Buttons" "no"
- Option "ZAxisMapping" "4 5"
-EndSection
-
-Section "InputDevice"
- # generated from default
- Identifier "Keyboard0"
- Driver "keyboard"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- VendorName "Unknown"
- ModelName "Unknown"
- HorizSync 30.0 - 110.0
- VertRefresh 50.0 - 150.0
- Option "DPMS" "false"
- Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync
- Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync
- ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync
- Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
- ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525
-EndSection
-
-Section "Device"
- Identifier "Device0"
- Driver "vmware"
- VendorName "NVIDIA Corporation"
- Option "DPI" "100 x 100"
-
-
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Device0"
- Monitor "Monitor0"
- DefaultDepth 24
- SubSection "Display"
- Depth 24
- Modes "1280x720"
- EndSubSection
-EndSection
-
diff --git a/abs/core-testing/live-installer/timezip.py b/abs/core-testing/live-installer/timezip.py
deleted file mode 100755
index 505b4a4..0000000
--- a/abs/core-testing/live-installer/timezip.py
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/usr/bin/python
-# import MySQL module
-#used to import the zipcode/timezone/nfs info fromMBE
-import MySQLdb
-import sys
-import getopt
-import socket
-
-
-def usage():
- print " -h --help"
- print " -d --installdb"
- print " -m --masterdb"
- print " -n --hostname of current machine"
-
-def printvars():
- print "masterdb: " + masterdb
- print "installdb:" + installdb
- print "hostname: " + thishostname
- print "BEhostname:" + BEhostname
- print "zipcode:" + zipcode
- print "timezone:" + tz
- print "nfsip:" + nfsip
- print "nfstoggle:" + nfstoggle
- print "nfsmount:" + nfsmount
- print "hobbitclient:" + hobbitclient
-# connect
-def selectvars():
-
- global BEhostname
- global zipcode
- global tz
- global nfsip
- global nfstoggle
- global nfsmount
- global hobbitclient
-
- db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg")
- # create a cursor
- cursor = db.cursor()
- # execute SQL statement
- cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb))
- result = cursor.fetchone()
- BEhostname=result[0]
-
- cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname))
- result = cursor.fetchone()
- try:
- zipcode = result[0]
- except TypeError:
- zipcode=""
-
- cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname))
- result = cursor.fetchone()
- try:
- nfsip=result[0]
- except TypeError:
- nfsip=""
-
- cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname))
- result = cursor.fetchone()
- try:
- nfstoggle=result[0]
- except TypeError:
- nfstoggle=""
-
- cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname))
- result = cursor.fetchone()
- try:
- nfsmount=result[0]
- except TypeError:
- nfsmount=""
-
- cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname))
- result = cursor.fetchone()
- try:
- tz=result[0]
- except TypeError:
- tz=""
-
- if ( thishostname != BEhostname ):
- cursor.execute("select data from settings where value='GlobalServiceHobbitserver'")
- result = cursor.fetchone()
- try:
- hobbitclient=result[0]
- except TypeError:
- hobbitclient="0"
-
-
-
-def insertvars():
-
- db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg")
- cursor = db.cursor()
-#inserting the zipcode
- cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if ( zipcode!="" ):
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname))
- print "inserting zipcode"
- else:
- cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname))
- print "updating zipcode"
-
-#inserting the timezone
- cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if ( tz != ""):
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname))
- print "inserting timezone"
- else:
- cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname))
- print "updating timezone"
-
-
-#start of NFSIP
- cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if ( nfsip != ""):
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname))
- print "inserting nfsip"
-
- if (nfstoggle != ""):
- cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname))
- print "inserting nfstoggle"
-
- if ( nfsmount !="") :
- cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname))
- print "inserting nfsmountpoint"
-
-#hobbitclient
- cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname))
- result = cursor.fetchone()
- if ( tz != ""):
- if (result == None):
- cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname))
- print "inserting hobbitcleint"
- else:
- cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname))
- print "updating hobbitclient"
-
-
-def main(argv):
- global masterdb
- global installdb
- global thishostname
- thishostname=""
- global BEhostname
- global zipcode
- global tz
- global nfsip
- global hobbitclient
- try:
- opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] )
- except getopt.GetoptError:
- sys.exit(2)
- for opt, arg in opts:
- if opt in ("-h", "--help"):
- usage()
- sys.exit()
- elif opt in ( "-d" , "--installdb"):
- installdb = arg
- elif opt in ("-m", "--masterdb"):
- masterdb = arg
- elif opt in ("-n", "--hostname"):
- thishostname = arg
-
- if ( thishostname == "" ):
- thishostname = socket.gethostname()
-
- selectvars()
- printvars()
- insertvars()
-if __name__ == "__main__":
- main(sys.argv[1:])
-
diff --git a/abs/core-testing/live-installer/timezone.bin b/abs/core-testing/live-installer/timezone.bin
deleted file mode 100755
index a11d65a..0000000
Binary files a/abs/core-testing/live-installer/timezone.bin and /dev/null differ
diff --git a/abs/core-testing/live-installer/xconfig.sh b/abs/core-testing/live-installer/xconfig.sh
deleted file mode 100755
index 42603d6..0000000
--- a/abs/core-testing/live-installer/xconfig.sh
+++ /dev/null
@@ -1,233 +0,0 @@
-#!/bin/bash
-BASE=""
-. /etc/profile
-#TEMPLATES="/usr/share/templates"
-
-function Xvalues {
- VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2`
- echo $VGACARDTYPE
- currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '`
- }
-
-function presetupX {
-if [ x$XUseAdvanced = x1 ]
-then
- if [ x$XIgnoreConfig = x1 ]
- then
- echo "Using User supplied X"
- if [ -f $BASE/data/home/mythtv/templates/xorg.user ]
- then
- cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF
- else
- echo "Didn't find the file"
- echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF
- fi
- else
- setupAdvancedX
- fi
-else
- setupX
-fi
-
-}
-
-function setupAdvancedX {
-echo "#doing the advanced" > /tmp/options
- Xcatagory=` echo $Xresadvanced |cut -d_ -f1`
- Xres=` echo $Xresadvanced |cut -d_ -f2`
- echo $Xcatagory
- if [ x$Xcatagory = "xNvidia" ]
- then
- Xres=""
- if [ $XnVidia1080p = "1" ]
- then
- Xres="${Xres} \"1920x1080_60\""
- fi
- if [ $XnVidia1080i = "1" ]
- then
- Xres="${Xres} \"1920x1080_60i\""
- fi
- if [ $XnVidia720p = "1" ]
- then
- Xres="${Xres} \"1280x720_60\""
- fi
- if [ $XnVidia480p = "1" ]
- then
- Xres="${Xres} \"720x480_60\""
- fi
- ML="\t Modes ${Xres}"
- else
-
- ML="\t Modes \"${Xres}\""
- fi
- echo $ML
- case $Xcardtype in
- NVIDIA|nVidia )
-
- case $Xconnection in
- DVI) ConnectedMonitor=DFP ;;
- vga) ConnectedMonitor=CRT;;
- Auto) ConnectedMonitor=Auto;;
- TV) ConnectedMonitor=TV
- echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options
- echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options
- ;;
- esac
- if [ $ConnectedMonitor = Auto ]
- then
- echo "auto connection"
- else
- echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options
- echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options
- echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options
- fi
-
- if [ x$XignoreEDID = x1 ]
- then
- EDIDvalue=true
- EDIDFREQ=false
- DS=" DisplaySize $XDisplaysize"
- HS=" HorizSync $XHsync"
- VR=" VertRefresh $XVrefresh"
- else
- EDIDvalue=false
- EDIDFREQ=true
- DS="# Display size edid used "
- HS="#Hsync edid used "
- VR="#Vertrefresh edid used "
-
- fi
- echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options
- echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options
-
-
- sed -e "s/^.*Modes.*$/${ML}/" \
- -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \
- -e "s/^.*DisplaySize.*$/ $DS/" \
- -e "s/^#.*HorizSync.*$/ $HS/g" \
- -e "s/^#.*VertRefresh.*$/ $VR/g" \
- -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF
-
- ;;
- ati|ATI)
- case $Xconnection in
- DVI) ConnectedMonitor="tmds1,nocrt1,notv";;
- VGA) ConnectedMonitor="crt1,notmds1,notv" ;;
- TV) ConnectedMonitor="tv,nocrt1,notmds1"
- echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options
- echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options
- ;;
-
- esac
-
-
- if [ x$XignoreEDID = x1 ]
- then
- DS=" DisplaySize $XDisplaysize"
- HS=" HorizSync $XHsync"
- VR=" VertRefresh $XVrefresh"
- else
- DS="# Display size edid used "
- HS="#Hsync edid used "
- VR="#Vertrefresh edid used "
-
- fi
-
- echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options
-
- sed -e "s/^.*Modes.*$/\t $ML/" \
- -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \
- -e "s/^.*DisplaySize.*$/ $DS/" \
- -e "s/^#.*HorizSync.*$/ $HS/g" \
- -e "s/^#.*VertRefresh.*$/ $VR/g" \
- -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF
- ;;
-
- via|VIA|Via) echo "no via here"
- ;;
-
- *)
- echo "unknown card type"
- ;;
- esac
-}
-
-
-
-function setupX {
- Xvalues
- echo "$currentmode ____ ${Xres}"
- #if [ ! x${currentmode} = x\"${Xres}\" ]
- if [ x = x ]
- then
- case $VGACARDTYPE in
- nVidia )
- sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF
- if [ ! x$TESTMODE = "xtest" ]
- then
- pacman --noconfirm -R libgl-dri
-# pacman --noconfirm -S nvidia-STB nvidia-utils
- pacman --noconfirm -S nvidia nvidia-utils
- fi
- ;;
- VMware )
- sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF
- ;;
-
- VIA )
- sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF
- if [ ! x$TESTMODE = "xtest" ]
- then
- pacman --noconfirm -R nvidia-STB nvidia-utils
- pacman --noconfirm -S libgl-dri
- fi
-
- ;;
- Intel)
- sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF
- if [ ! x$TESTMODE = "xtest" ]
- then
- pacman --noconfirm -Rd nvidia-utils
- pacman --noconfirm -S libgl-dri
- fi
- ;;
-
- *) #XCONF=`hwd -x |grep etc`
- XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-`
-
-
- cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF
- ;;
- esac
- fi
-
-}
-
-#MAIN
-TESTMODE=$1
-if [ x$TESTMODE = "xtest" ]
-then
- XORG_CONF="/tmp/xorg.conf.test"
- XUseAdvanced="1"
- XIgnoreConfig="${2}"
- Xcardtype="${3}"
- XIgnoreEDID="${4}"
- Xconnection="${5}"
- XHsync="${6}"
- XVrefresh="${7}"
- Xresadvanced="${8}"
- XTVstandard="${9}"
- XTVconnection="${10}"
- XDisplaysize="${11}"
-else
- if [ -f /etc/systemconfig ]
- then
- . /etc/systemconfig
- else
- Xres="800x600"
- fi
- XORG_CONF="/etc/X11/xorg.conf"
-fi
-presetupX
-
-
--
cgit v0.12