From 6c8f178b6c8874623e780d2c049a49b780237654 Mon Sep 17 00:00:00 2001 From: James Meyer Date: Fri, 7 Nov 2008 19:55:11 -0600 Subject: rename live-installer to LinHES-config --- abs/core-testing/LinHES-config/LinHES-release | 1 + abs/core-testing/LinHES-config/LinHES.install | 78 ++ abs/core-testing/LinHES-config/MythVantage.sh | 3 + abs/core-testing/LinHES-config/PKGBUILD | 63 + abs/core-testing/LinHES-config/add_service.sh | 15 + abs/core-testing/LinHES-config/autocard.py | 302 +++++ abs/core-testing/LinHES-config/bpopup-ui.xml | 164 +++ abs/core-testing/LinHES-config/build_diskless.sh | 143 +++ .../LinHES-config/checkout_MythVantage.sh | 47 + abs/core-testing/LinHES-config/create_master.sh | 57 + abs/core-testing/LinHES-config/file_time_offset.py | 39 + abs/core-testing/LinHES-config/install-ui.xml | 175 +++ .../LinHES-config/install_db_chroot.sh | 52 + .../LinHES-config/install_functions.sh | 449 +++++++ abs/core-testing/LinHES-config/install_proxy.sh | 526 ++++++++ abs/core-testing/LinHES-config/issue | 1 + abs/core-testing/LinHES-config/live-install.sh | 28 + abs/core-testing/LinHES-config/myth_user_call | 164 +++ abs/core-testing/LinHES-config/networkconfig.sh | 280 +++++ abs/core-testing/LinHES-config/remove_service.sh | 8 + .../LinHES-config/restore_default_settings.sh | 349 ++++++ .../LinHES-config/restore_km_db_chroot.sh | 53 + abs/core-testing/LinHES-config/soundconfig.sh | 248 ++++ abs/core-testing/LinHES-config/startx | 29 + abs/core-testing/LinHES-config/systemconfig.sh | 1255 +++++++++++++++++++ .../templates/LCD/Shuttle-SG33/LCDd.conf | 869 +++++++++++++ .../templates/LCD/Silverstone/LCDd.conf | 869 +++++++++++++ .../templates/LCD/Silverstone/modules | 1 + .../templates/LCD/antec_fusion/LCDd.conf | 869 +++++++++++++ .../templates/LCD/antec_fusion/lircd.conf | 38 + .../templates/LCD/antec_fusion/lircrc | 15 + .../templates/LCD/antec_fusion/modules | 1 + .../LinHES-config/templates/LCD/xosd/LCDd.conf | 957 ++++++++++++++ .../LinHES-config/templates/cc.orig.sh | 35 + abs/core-testing/LinHES-config/templates/cc.sh | 5 + abs/core-testing/LinHES-config/templates/cc_vol.sh | 5 + .../LinHES-config/templates/change_chan.sh | 19 + .../LinHES-config/templates/cron.template | 4 + .../LinHES-config/templates/etcnet/eth/ipv4address | 2 + .../LinHES-config/templates/etcnet/eth/ipv4route | 2 + .../LinHES-config/templates/etcnet/eth/iwconfig | 2 + .../LinHES-config/templates/etcnet/eth/options | 7 + .../LinHES-config/templates/evrouter/MythVantage-4 | 0 .../LinHES-config/templates/evrouter/MythVantage-8 | 0 .../templates/evrouter/MythVantage-Full | 0 .../templates/evrouter/MythVantage8-minipac | 3 + .../templates/evrouter/MythVantage8-uhid | 3 + .../LinHES-config/templates/exports.template | 8 + .../LinHES-config/templates/fstab.conf.template | 16 + .../LinHES-config/templates/mysql.service | 13 + abs/core-testing/LinHES-config/templates/mysql.txt | 29 + .../LinHES-config/templates/ncid.conf.template | 51 + .../LinHES-config/templates/ncidd.conf.template | 143 +++ .../LinHES-config/templates/real_change_chan.sh | 19 + .../templates/remotes/ATI_wonder/lircd.ATI.conf | 357 ++++++ .../remotes/ATI_wonder/lircrc-atiwonder.txt | 922 ++++++++++++++ .../templates/remotes/ATI_wonder/preview.jpg | Bin 0 -> 63480 bytes .../remotes/MX-500-jams/lircd.conf.MX-500-JAMS | 115 ++ .../templates/remotes/MX-500-jams/lircrc | 832 +++++++++++++ .../templates/remotes/MX-500-jams/preview.jpg | Bin 0 -> 10473 bytes .../templates/remotes/MythVantage-one/lircd.conf | 115 ++ .../templates/remotes/MythVantage-one/lircrc | 857 +++++++++++++ .../templates/remotes/MythVantage-one/preview.jpg | Bin 0 -> 88727 bytes .../RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf | 87 ++ .../RadioShack_15-2116-Jarod_Wilson/lircrc-rs | 539 ++++++++ .../RadioShack_15-2116-Jarod_Wilson/preview.jpg | Bin 0 -> 7504 bytes .../templates/remotes/adaptec/lircd.conf.AVC-2410 | 62 + .../templates/remotes/animax/lircd.conf.animax | 199 +++ .../templates/remotes/animax/lircmd.conf.animax | 71 ++ .../templates/remotes/animax/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/asus/lircd.conf.asus | 56 + .../templates/remotes/asus/lircd.conf.digimatrix | 152 +++ .../templates/remotes/atiusb/lircd.conf.atiusb | 1259 +++++++++++++++++++ .../remotes/avermedia/lircd.conf.avermedia | 72 ++ .../remotes/avermedia/lircd.conf.avermedia98 | 175 +++ .../templates/remotes/avermedia/lircd.conf.vdomate | 61 + .../remotes/avermedia/lircmd.conf.avermedia | 33 + .../remotes/avermedia/lircmd.conf.avermedia98 | 37 + .../templates/remotes/avermedia/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/bestbuy/lircd.conf.bestbuy | 63 + .../templates/remotes/bestbuy/lircd.conf.bestbuy2 | 59 + .../templates/remotes/bestbuy/lircmd.conf.bestbuy | 33 + .../templates/remotes/bestbuy/lircmd.conf.bestbuy2 | 34 + .../templates/remotes/caraca/lircd.conf.caraca | 46 + .../templates/remotes/caraca/lircrc.caraca | 134 ++ .../templates/remotes/caraca/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/chronos/lircd.conf.chronos | 56 + .../templates/remotes/cph03x/lircd.conf.cph03x | 72 ++ .../templates/remotes/creative/lircd.conf.alsa_usb | 56 + .../remotes/creative/lircd.conf.breakoutbox | 55 + .../templates/remotes/creative/lircd.conf.creative | 59 + .../templates/remotes/creative/lircd.conf.infracd | 61 + .../remotes/creative/lircd.conf.livedrive | 115 ++ .../templates/remotes/dvico/lircd.conf.fusionHDTV | 221 ++++ .../templates/remotes/ea65/lircd.conf.ea65 | 73 ++ .../templates/remotes/ea65/lircrc.ea65 | 381 ++++++ .../templates/remotes/ea65/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/ericsson/lircd.conf.bte | 53 + .../templates/remotes/generic/DENON.conf | 31 + .../templates/remotes/generic/MOTOROLA.conf | 53 + .../templates/remotes/generic/NEC-pulse.conf | 32 + .../templates/remotes/generic/NEC-short-pulse.conf | 34 + .../templates/remotes/generic/NEC.conf | 30 + .../templates/remotes/generic/RC-5.conf | 30 + .../templates/remotes/generic/RC-6.conf | 28 + .../templates/remotes/generic/RCMM-32.conf | 23 + .../templates/remotes/generic/RECS80.conf | 31 + .../templates/remotes/generic/SANYO.conf | 34 + .../templates/remotes/generic/SONY12.conf | 28 + .../templates/remotes/generic/SONY20.conf | 29 + .../templates/remotes/gr8zap/lircd.conf.streamzap | 69 ++ .../LinHES-config/templates/remotes/gr8zap/lircrc | 472 +++++++ .../templates/remotes/gr8zap/preview.jpg | Bin 0 -> 83195 bytes .../remotes/hauppauge/lircd.conf.hauppauge | 274 ++++ .../remotes/hauppauge/lircmd.conf.hauppauge | 33 + .../templates/remotes/hauppauge/preview.jpg | Bin 0 -> 45763 bytes .../remotes/hercules/lircd.conf.smarttv_stereo | 63 + .../templates/remotes/imon-pad/lircd.conf | 88 ++ .../templates/remotes/imon-pad/lircrc | 240 ++++ .../templates/remotes/imon-pad/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/imon/lircd.conf.imon | 79 ++ .../templates/remotes/imon/lircd.conf.imon-pad | 84 ++ .../templates/remotes/imon/lircd.conf.imon-rsc | 109 ++ .../templates/remotes/iodata/lircd.conf.gvbctv5pci | 68 + .../templates/remotes/km_ready_preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/knc_one/lircd.conf.knc_one | 62 + .../templates/remotes/kworld/lircd.conf.kworld | 144 +++ .../templates/remotes/leadtek/lircd.conf.PVR2000 | 75 ++ .../templates/remotes/leadtek/lircd.conf.RM-0007 | 86 ++ .../templates/remotes/leadtek/lircd.conf.RM-0010 | 101 ++ .../templates/remotes/leadtek/lircmd.conf.RM-0007 | 36 + .../templates/remotes/leadtek/lircmd.conf.RM-0010 | 36 + .../remotes/life-view/lircd.conf.flyvideo | 87 ++ .../remotes/life-view/lircmd.conf.flyvideo | 33 + .../templates/remotes/life-view/lircrc.flyvideo | 131 ++ .../templates/remotes/life-view/preview.jpg | Bin 0 -> 15108 bytes .../templates/remotes/logitech/lircd.conf.logitech | 111 ++ .../remotes/logitech/lircmd.conf.logitech | 64 + .../templates/remotes/mceusb/lircd-mceusb.conf | 88 ++ .../templates/remotes/mceusb/lircd.conf.mceusb | 104 ++ .../templates/remotes/mceusb/lircrc-mceusb | 393 ++++++ .../templates/remotes/mceusb/preview.jpg | Bin 0 -> 12551 bytes .../templates/remotes/no_remote/preview.jpg | Bin 0 -> 3087 bytes .../remotes/packard_bell/lircd.conf.packard_bell | 94 ++ .../templates/remotes/pcmak/lircd.conf.pcmak | 116 ++ .../templates/remotes/pcmak/lircmd.conf.pcmak | 29 + .../templates/remotes/pcmak/lircrc.pcmak | 1310 ++++++++++++++++++++ .../templates/remotes/pcmak/preview.jpg | Bin 0 -> 15108 bytes .../remotes/pinnacle_systems/lircd.conf.pctv | 94 ++ .../templates/remotes/pixelview/lircd.conf.playtv | 34 + .../remotes/pixelview/lircd.conf.playtv_bt878 | 54 + .../remotes/pixelview/lircd.conf.playtv_pro | 159 +++ .../remotes/pixelview/lircd.conf.remotemaster | 117 ++ .../remotes/pixelview/lircmd.conf.playtv_pro | 29 + .../remotes/pixelview/lircmd.conf.remotemaster | 31 + .../templates/remotes/pixelview/lircrc.playtv_pro | 134 ++ .../templates/remotes/provideo/lircd.conf.pv951 | 67 + .../templates/remotes/receiver_usb.id | 33 + .../templates/remotes/remotec/lircd.conf.BW6130 | 88 ++ .../templates/remotes/remotec/lircmd.conf.BW6130 | 291 +++++ .../templates/remotes/sasem/lircd.conf.sasem | 81 ++ .../remotes/sigma_designs/lircd.conf.realmagic | 83 ++ .../templates/remotes/silitek/lircd.conf.silitek | 97 ++ .../templates/remotes/silitek/lircmd.conf.silitek | 72 ++ .../remotes/snapstream_firefly/lircd.snapstrm.conf | 127 ++ .../remotes/snapstream_firefly/lircrc-snapstrm.txt | 590 +++++++++ .../remotes/snapstream_firefly/preview.jpg | Bin 0 -> 63750 bytes .../remotes/streamzap/lircd.conf.streamzap | 69 ++ .../templates/remotes/streamzap/lircrc | 832 +++++++++++++ .../templates/remotes/streamzap/preview.jpg | Bin 0 -> 83195 bytes .../remotes/technisat/lircd.conf.mediafocusI | 42 + .../templates/remotes/tekram/lircd.conf.m230 | 48 + .../templates/remotes/tekram/lircmd.conf.m230 | 33 + .../templates/remotes/unknown/preview.jpg | Bin 0 -> 1587 bytes .../templates/remotes/x10/lircd.conf.mouseremote | 116 ++ .../templates/remotes/x10/lircd.conf.mp3anywhere | 64 + .../templates/remotes/x10/lircmd.conf.mouseremote | 288 +++++ .../LinHES-config/templates/samba/smb.conf.home | 10 + .../LinHES-config/templates/samba/smb.conf.media | 10 + .../templates/samba/smb.conf.template | 125 ++ .../templates/settings/default_1/keybindings.txt | 209 ++++ .../templates/settings/default_1/settings.txt | 320 +++++ .../templates/settings/default_2/keybindings.txt | 209 ++++ .../templates/settings/default_2/settings.txt | 320 +++++ .../LinHES-config/templates/sources/mv-core | 2 + .../templates/sources/mv-core-testing | 2 + .../LinHES-config/templates/sources/mv-extra | 2 + .../templates/sources/mv-extra-testing | 2 + .../LinHES-config/templates/sources/svc_pkg | 3 + .../transmit/Time_Warner_SA3250/lircd.conf | 413 ++++++ .../LinHES-config/templates/xine.config.template | 754 +++++++++++ .../LinHES-config/templates/xorg/modeline.ATSC | 33 + .../LinHES-config/templates/xorg/modeline.DVD | 9 + .../LinHES-config/templates/xorg/modeline.NTSC | 10 + .../LinHES-config/templates/xorg/modeline.VESA | 163 +++ .../LinHES-config/templates/xorg/modeline.custom | 1 + .../LinHES-config/templates/xorg/xorg.conf.ati | 94 ++ .../LinHES-config/templates/xorg/xorg.conf.intel | 148 +++ .../LinHES-config/templates/xorg/xorg.conf.nvidia | 90 ++ .../LinHES-config/templates/xorg/xorg.conf.via | 77 ++ .../LinHES-config/templates/xorg/xorg.conf.vmware | 72 ++ abs/core-testing/LinHES-config/timezip.py | 185 +++ abs/core-testing/LinHES-config/timezone.bin | Bin 0 -> 805819 bytes abs/core-testing/LinHES-config/xconfig.sh | 233 ++++ abs/core-testing/live-installer/LinHES-release | 1 - abs/core-testing/live-installer/MythVantage.sh | 3 - abs/core-testing/live-installer/PKGBUILD | 62 - abs/core-testing/live-installer/add_service.sh | 15 - abs/core-testing/live-installer/autocard.py | 302 ----- abs/core-testing/live-installer/bpopup-ui.xml | 164 --- abs/core-testing/live-installer/build_diskless.sh | 143 --- .../live-installer/checkout_MythVantage.sh | 47 - abs/core-testing/live-installer/create_master.sh | 57 - .../live-installer/file_time_offset.py | 39 - abs/core-testing/live-installer/install-ui.xml | 175 --- .../live-installer/install_db_chroot.sh | 52 - .../live-installer/install_functions.sh | 449 ------- abs/core-testing/live-installer/install_proxy.sh | 526 -------- abs/core-testing/live-installer/issue | 1 - abs/core-testing/live-installer/live-install.sh | 28 - abs/core-testing/live-installer/live.install | 78 -- abs/core-testing/live-installer/myth_user_call | 164 --- abs/core-testing/live-installer/networkconfig.sh | 280 ----- abs/core-testing/live-installer/remove_service.sh | 8 - .../live-installer/restore_default_settings.sh | 349 ------ .../live-installer/restore_km_db_chroot.sh | 53 - abs/core-testing/live-installer/soundconfig.sh | 248 ---- abs/core-testing/live-installer/startx | 29 - abs/core-testing/live-installer/systemconfig.sh | 1255 ------------------- .../templates/LCD/Shuttle-SG33/LCDd.conf | 869 ------------- .../templates/LCD/Silverstone/LCDd.conf | 869 ------------- .../templates/LCD/Silverstone/modules | 1 - .../templates/LCD/antec_fusion/LCDd.conf | 869 ------------- .../templates/LCD/antec_fusion/lircd.conf | 38 - .../templates/LCD/antec_fusion/lircrc | 15 - .../templates/LCD/antec_fusion/modules | 1 - .../live-installer/templates/LCD/xosd/LCDd.conf | 957 -------------- .../live-installer/templates/cc.orig.sh | 35 - abs/core-testing/live-installer/templates/cc.sh | 5 - .../live-installer/templates/cc_vol.sh | 5 - .../live-installer/templates/change_chan.sh | 19 - .../live-installer/templates/cron.template | 4 - .../templates/etcnet/eth/ipv4address | 2 - .../live-installer/templates/etcnet/eth/ipv4route | 2 - .../live-installer/templates/etcnet/eth/iwconfig | 2 - .../live-installer/templates/etcnet/eth/options | 7 - .../templates/evrouter/MythVantage-4 | 0 .../templates/evrouter/MythVantage-8 | 0 .../templates/evrouter/MythVantage-Full | 0 .../templates/evrouter/MythVantage8-minipac | 3 - .../templates/evrouter/MythVantage8-uhid | 3 - .../live-installer/templates/exports.template | 8 - .../live-installer/templates/fstab.conf.template | 16 - .../live-installer/templates/mysql.service | 13 - .../live-installer/templates/mysql.txt | 29 - .../live-installer/templates/ncid.conf.template | 51 - .../live-installer/templates/ncidd.conf.template | 143 --- .../live-installer/templates/real_change_chan.sh | 19 - .../templates/remotes/ATI_wonder/lircd.ATI.conf | 357 ------ .../remotes/ATI_wonder/lircrc-atiwonder.txt | 922 -------------- .../templates/remotes/ATI_wonder/preview.jpg | Bin 63480 -> 0 bytes .../remotes/MX-500-jams/lircd.conf.MX-500-JAMS | 115 -- .../templates/remotes/MX-500-jams/lircrc | 832 ------------- .../templates/remotes/MX-500-jams/preview.jpg | Bin 10473 -> 0 bytes .../templates/remotes/MythVantage-one/lircd.conf | 115 -- .../templates/remotes/MythVantage-one/lircrc | 857 ------------- .../templates/remotes/MythVantage-one/preview.jpg | Bin 88727 -> 0 bytes .../RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf | 87 -- .../RadioShack_15-2116-Jarod_Wilson/lircrc-rs | 539 -------- .../RadioShack_15-2116-Jarod_Wilson/preview.jpg | Bin 7504 -> 0 bytes .../templates/remotes/adaptec/lircd.conf.AVC-2410 | 62 - .../templates/remotes/animax/lircd.conf.animax | 199 --- .../templates/remotes/animax/lircmd.conf.animax | 71 -- .../templates/remotes/animax/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/asus/lircd.conf.asus | 56 - .../templates/remotes/asus/lircd.conf.digimatrix | 152 --- .../templates/remotes/atiusb/lircd.conf.atiusb | 1259 ------------------- .../remotes/avermedia/lircd.conf.avermedia | 72 -- .../remotes/avermedia/lircd.conf.avermedia98 | 175 --- .../templates/remotes/avermedia/lircd.conf.vdomate | 61 - .../remotes/avermedia/lircmd.conf.avermedia | 33 - .../remotes/avermedia/lircmd.conf.avermedia98 | 37 - .../templates/remotes/avermedia/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/bestbuy/lircd.conf.bestbuy | 63 - .../templates/remotes/bestbuy/lircd.conf.bestbuy2 | 59 - .../templates/remotes/bestbuy/lircmd.conf.bestbuy | 33 - .../templates/remotes/bestbuy/lircmd.conf.bestbuy2 | 34 - .../templates/remotes/caraca/lircd.conf.caraca | 46 - .../templates/remotes/caraca/lircrc.caraca | 134 -- .../templates/remotes/caraca/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/chronos/lircd.conf.chronos | 56 - .../templates/remotes/cph03x/lircd.conf.cph03x | 72 -- .../templates/remotes/creative/lircd.conf.alsa_usb | 56 - .../remotes/creative/lircd.conf.breakoutbox | 55 - .../templates/remotes/creative/lircd.conf.creative | 59 - .../templates/remotes/creative/lircd.conf.infracd | 61 - .../remotes/creative/lircd.conf.livedrive | 115 -- .../templates/remotes/dvico/lircd.conf.fusionHDTV | 221 ---- .../templates/remotes/ea65/lircd.conf.ea65 | 73 -- .../templates/remotes/ea65/lircrc.ea65 | 381 ------ .../templates/remotes/ea65/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/ericsson/lircd.conf.bte | 53 - .../templates/remotes/generic/DENON.conf | 31 - .../templates/remotes/generic/MOTOROLA.conf | 53 - .../templates/remotes/generic/NEC-pulse.conf | 32 - .../templates/remotes/generic/NEC-short-pulse.conf | 34 - .../templates/remotes/generic/NEC.conf | 30 - .../templates/remotes/generic/RC-5.conf | 30 - .../templates/remotes/generic/RC-6.conf | 28 - .../templates/remotes/generic/RCMM-32.conf | 23 - .../templates/remotes/generic/RECS80.conf | 31 - .../templates/remotes/generic/SANYO.conf | 34 - .../templates/remotes/generic/SONY12.conf | 28 - .../templates/remotes/generic/SONY20.conf | 29 - .../templates/remotes/gr8zap/lircd.conf.streamzap | 69 -- .../live-installer/templates/remotes/gr8zap/lircrc | 472 ------- .../templates/remotes/gr8zap/preview.jpg | Bin 83195 -> 0 bytes .../remotes/hauppauge/lircd.conf.hauppauge | 274 ---- .../remotes/hauppauge/lircmd.conf.hauppauge | 33 - .../templates/remotes/hauppauge/preview.jpg | Bin 45763 -> 0 bytes .../remotes/hercules/lircd.conf.smarttv_stereo | 63 - .../templates/remotes/imon-pad/lircd.conf | 88 -- .../templates/remotes/imon-pad/lircrc | 240 ---- .../templates/remotes/imon-pad/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/imon/lircd.conf.imon | 79 -- .../templates/remotes/imon/lircd.conf.imon-pad | 84 -- .../templates/remotes/imon/lircd.conf.imon-rsc | 109 -- .../templates/remotes/iodata/lircd.conf.gvbctv5pci | 68 - .../templates/remotes/km_ready_preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/knc_one/lircd.conf.knc_one | 62 - .../templates/remotes/kworld/lircd.conf.kworld | 144 --- .../templates/remotes/leadtek/lircd.conf.PVR2000 | 75 -- .../templates/remotes/leadtek/lircd.conf.RM-0007 | 86 -- .../templates/remotes/leadtek/lircd.conf.RM-0010 | 101 -- .../templates/remotes/leadtek/lircmd.conf.RM-0007 | 36 - .../templates/remotes/leadtek/lircmd.conf.RM-0010 | 36 - .../remotes/life-view/lircd.conf.flyvideo | 87 -- .../remotes/life-view/lircmd.conf.flyvideo | 33 - .../templates/remotes/life-view/lircrc.flyvideo | 131 -- .../templates/remotes/life-view/preview.jpg | Bin 15108 -> 0 bytes .../templates/remotes/logitech/lircd.conf.logitech | 111 -- .../remotes/logitech/lircmd.conf.logitech | 64 - .../templates/remotes/mceusb/lircd-mceusb.conf | 88 -- .../templates/remotes/mceusb/lircd.conf.mceusb | 104 -- .../templates/remotes/mceusb/lircrc-mceusb | 393 ------ .../templates/remotes/mceusb/preview.jpg | Bin 12551 -> 0 bytes .../templates/remotes/no_remote/preview.jpg | Bin 3087 -> 0 bytes .../remotes/packard_bell/lircd.conf.packard_bell | 94 -- .../templates/remotes/pcmak/lircd.conf.pcmak | 116 -- .../templates/remotes/pcmak/lircmd.conf.pcmak | 29 - .../templates/remotes/pcmak/lircrc.pcmak | 1310 -------------------- .../templates/remotes/pcmak/preview.jpg | Bin 15108 -> 0 bytes .../remotes/pinnacle_systems/lircd.conf.pctv | 94 -- .../templates/remotes/pixelview/lircd.conf.playtv | 34 - .../remotes/pixelview/lircd.conf.playtv_bt878 | 54 - .../remotes/pixelview/lircd.conf.playtv_pro | 159 --- .../remotes/pixelview/lircd.conf.remotemaster | 117 -- .../remotes/pixelview/lircmd.conf.playtv_pro | 29 - .../remotes/pixelview/lircmd.conf.remotemaster | 31 - .../templates/remotes/pixelview/lircrc.playtv_pro | 134 -- .../templates/remotes/provideo/lircd.conf.pv951 | 67 - .../templates/remotes/receiver_usb.id | 33 - .../templates/remotes/remotec/lircd.conf.BW6130 | 88 -- .../templates/remotes/remotec/lircmd.conf.BW6130 | 291 ----- .../templates/remotes/sasem/lircd.conf.sasem | 81 -- .../remotes/sigma_designs/lircd.conf.realmagic | 83 -- .../templates/remotes/silitek/lircd.conf.silitek | 97 -- .../templates/remotes/silitek/lircmd.conf.silitek | 72 -- .../remotes/snapstream_firefly/lircd.snapstrm.conf | 127 -- .../remotes/snapstream_firefly/lircrc-snapstrm.txt | 590 --------- .../remotes/snapstream_firefly/preview.jpg | Bin 63750 -> 0 bytes .../remotes/streamzap/lircd.conf.streamzap | 69 -- .../templates/remotes/streamzap/lircrc | 832 ------------- .../templates/remotes/streamzap/preview.jpg | Bin 83195 -> 0 bytes .../remotes/technisat/lircd.conf.mediafocusI | 42 - .../templates/remotes/tekram/lircd.conf.m230 | 48 - .../templates/remotes/tekram/lircmd.conf.m230 | 33 - .../templates/remotes/unknown/preview.jpg | Bin 1587 -> 0 bytes .../templates/remotes/x10/lircd.conf.mouseremote | 116 -- .../templates/remotes/x10/lircd.conf.mp3anywhere | 64 - .../templates/remotes/x10/lircmd.conf.mouseremote | 288 ----- .../live-installer/templates/samba/smb.conf.home | 10 - .../live-installer/templates/samba/smb.conf.media | 10 - .../templates/samba/smb.conf.template | 125 -- .../templates/settings/default_1/keybindings.txt | 209 ---- .../templates/settings/default_1/settings.txt | 320 ----- .../templates/settings/default_2/keybindings.txt | 209 ---- .../templates/settings/default_2/settings.txt | 320 ----- .../live-installer/templates/sources/mv-core | 2 - .../templates/sources/mv-core-testing | 2 - .../live-installer/templates/sources/mv-extra | 2 - .../templates/sources/mv-extra-testing | 2 - .../live-installer/templates/sources/svc_pkg | 3 - .../transmit/Time_Warner_SA3250/lircd.conf | 413 ------ .../live-installer/templates/xine.config.template | 754 ----------- .../live-installer/templates/xorg/modeline.ATSC | 33 - .../live-installer/templates/xorg/modeline.DVD | 9 - .../live-installer/templates/xorg/modeline.NTSC | 10 - .../live-installer/templates/xorg/modeline.VESA | 163 --- .../live-installer/templates/xorg/modeline.custom | 1 - .../live-installer/templates/xorg/xorg.conf.ati | 94 -- .../live-installer/templates/xorg/xorg.conf.intel | 148 --- .../live-installer/templates/xorg/xorg.conf.nvidia | 90 -- .../live-installer/templates/xorg/xorg.conf.via | 77 -- .../live-installer/templates/xorg/xorg.conf.vmware | 72 -- abs/core-testing/live-installer/timezip.py | 185 --- abs/core-testing/live-installer/timezone.bin | Bin 805819 -> 0 bytes abs/core-testing/live-installer/xconfig.sh | 233 ---- 408 files changed, 28317 insertions(+), 28316 deletions(-) create mode 100644 abs/core-testing/LinHES-config/LinHES-release create mode 100644 abs/core-testing/LinHES-config/LinHES.install create mode 100755 abs/core-testing/LinHES-config/MythVantage.sh create mode 100755 abs/core-testing/LinHES-config/PKGBUILD create mode 100755 abs/core-testing/LinHES-config/add_service.sh create mode 100755 abs/core-testing/LinHES-config/autocard.py create mode 100755 abs/core-testing/LinHES-config/bpopup-ui.xml create mode 100755 abs/core-testing/LinHES-config/build_diskless.sh create mode 100755 abs/core-testing/LinHES-config/checkout_MythVantage.sh create mode 100755 abs/core-testing/LinHES-config/create_master.sh create mode 100755 abs/core-testing/LinHES-config/file_time_offset.py create mode 100755 abs/core-testing/LinHES-config/install-ui.xml create mode 100755 abs/core-testing/LinHES-config/install_db_chroot.sh create mode 100755 abs/core-testing/LinHES-config/install_functions.sh create mode 100755 abs/core-testing/LinHES-config/install_proxy.sh create mode 100644 abs/core-testing/LinHES-config/issue create mode 100755 abs/core-testing/LinHES-config/live-install.sh create mode 100644 abs/core-testing/LinHES-config/myth_user_call create mode 100644 abs/core-testing/LinHES-config/networkconfig.sh create mode 100755 abs/core-testing/LinHES-config/remove_service.sh create mode 100755 abs/core-testing/LinHES-config/restore_default_settings.sh create mode 100644 abs/core-testing/LinHES-config/restore_km_db_chroot.sh create mode 100755 abs/core-testing/LinHES-config/soundconfig.sh create mode 100755 abs/core-testing/LinHES-config/startx create mode 100755 abs/core-testing/LinHES-config/systemconfig.sh create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf create mode 100644 abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules create mode 100644 abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf create mode 100755 abs/core-testing/LinHES-config/templates/cc.orig.sh create mode 100755 abs/core-testing/LinHES-config/templates/cc.sh create mode 100755 abs/core-testing/LinHES-config/templates/cc_vol.sh create mode 100755 abs/core-testing/LinHES-config/templates/change_chan.sh create mode 100644 abs/core-testing/LinHES-config/templates/cron.template create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig create mode 100644 abs/core-testing/LinHES-config/templates/etcnet/eth/options create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac create mode 100644 abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid create mode 100644 abs/core-testing/LinHES-config/templates/exports.template create mode 100755 abs/core-testing/LinHES-config/templates/fstab.conf.template create mode 100644 abs/core-testing/LinHES-config/templates/mysql.service create mode 100755 abs/core-testing/LinHES-config/templates/mysql.txt create mode 100755 abs/core-testing/LinHES-config/templates/ncid.conf.template create mode 100644 abs/core-testing/LinHES-config/templates/ncidd.conf.template create mode 100755 abs/core-testing/LinHES-config/templates/real_change_chan.sh create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf create mode 100755 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs create mode 100644 abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax create mode 100644 abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus create mode 100644 abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix create mode 100644 abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy create mode 100644 abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca create mode 100644 abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos create mode 100644 abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd create mode 100644 abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive create mode 100644 abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad create mode 100644 abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci create mode 100644 abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one create mode 100644 abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo create mode 100644 abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech create mode 100644 abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb create mode 100644 abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster create mode 100644 abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro create mode 100644 abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id create mode 100644 abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem create mode 100644 abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic create mode 100644 abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek create mode 100644 abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt create mode 100644 abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap create mode 100755 abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc create mode 100644 abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI create mode 100644 abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 create mode 100644 abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere create mode 100644 abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote create mode 100755 abs/core-testing/LinHES-config/templates/samba/smb.conf.home create mode 100755 abs/core-testing/LinHES-config/templates/samba/smb.conf.media create mode 100644 abs/core-testing/LinHES-config/templates/samba/smb.conf.template create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt create mode 100644 abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-core create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-core-testing create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-extra create mode 100644 abs/core-testing/LinHES-config/templates/sources/mv-extra-testing create mode 100644 abs/core-testing/LinHES-config/templates/sources/svc_pkg create mode 100755 abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf create mode 100644 abs/core-testing/LinHES-config/templates/xine.config.template create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.DVD create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.VESA create mode 100644 abs/core-testing/LinHES-config/templates/xorg/modeline.custom create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel create mode 100755 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia create mode 100644 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via create mode 100755 abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware create mode 100755 abs/core-testing/LinHES-config/timezip.py create mode 100755 abs/core-testing/LinHES-config/timezone.bin create mode 100755 abs/core-testing/LinHES-config/xconfig.sh delete mode 100644 abs/core-testing/live-installer/LinHES-release delete mode 100755 abs/core-testing/live-installer/MythVantage.sh delete mode 100755 abs/core-testing/live-installer/PKGBUILD delete mode 100755 abs/core-testing/live-installer/add_service.sh delete mode 100755 abs/core-testing/live-installer/autocard.py delete mode 100755 abs/core-testing/live-installer/bpopup-ui.xml delete mode 100755 abs/core-testing/live-installer/build_diskless.sh delete mode 100755 abs/core-testing/live-installer/checkout_MythVantage.sh delete mode 100755 abs/core-testing/live-installer/create_master.sh delete mode 100755 abs/core-testing/live-installer/file_time_offset.py delete mode 100755 abs/core-testing/live-installer/install-ui.xml delete mode 100755 abs/core-testing/live-installer/install_db_chroot.sh delete mode 100755 abs/core-testing/live-installer/install_functions.sh delete mode 100755 abs/core-testing/live-installer/install_proxy.sh delete mode 100644 abs/core-testing/live-installer/issue delete mode 100755 abs/core-testing/live-installer/live-install.sh delete mode 100644 abs/core-testing/live-installer/live.install delete mode 100644 abs/core-testing/live-installer/myth_user_call delete mode 100644 abs/core-testing/live-installer/networkconfig.sh delete mode 100755 abs/core-testing/live-installer/remove_service.sh delete mode 100755 abs/core-testing/live-installer/restore_default_settings.sh delete mode 100644 abs/core-testing/live-installer/restore_km_db_chroot.sh delete mode 100755 abs/core-testing/live-installer/soundconfig.sh delete mode 100755 abs/core-testing/live-installer/startx delete mode 100755 abs/core-testing/live-installer/systemconfig.sh delete mode 100644 abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf delete mode 100644 abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf delete mode 100644 abs/core-testing/live-installer/templates/LCD/Silverstone/modules delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc delete mode 100644 abs/core-testing/live-installer/templates/LCD/antec_fusion/modules delete mode 100644 abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf delete mode 100755 abs/core-testing/live-installer/templates/cc.orig.sh delete mode 100755 abs/core-testing/live-installer/templates/cc.sh delete mode 100755 abs/core-testing/live-installer/templates/cc_vol.sh delete mode 100755 abs/core-testing/live-installer/templates/change_chan.sh delete mode 100644 abs/core-testing/live-installer/templates/cron.template delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/ipv4address delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/ipv4route delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/iwconfig delete mode 100644 abs/core-testing/live-installer/templates/etcnet/eth/options delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-4 delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-8 delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage-Full delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac delete mode 100644 abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid delete mode 100644 abs/core-testing/live-installer/templates/exports.template delete mode 100755 abs/core-testing/live-installer/templates/fstab.conf.template delete mode 100644 abs/core-testing/live-installer/templates/mysql.service delete mode 100755 abs/core-testing/live-installer/templates/mysql.txt delete mode 100755 abs/core-testing/live-installer/templates/ncid.conf.template delete mode 100644 abs/core-testing/live-installer/templates/ncidd.conf.template delete mode 100755 abs/core-testing/live-installer/templates/real_change_chan.sh delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt delete mode 100644 abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc delete mode 100644 abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf delete mode 100755 abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc delete mode 100644 abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs delete mode 100644 abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410 delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax delete mode 100644 abs/core-testing/live-installer/templates/remotes/animax/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus delete mode 100644 abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix delete mode 100644 abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98 delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98 delete mode 100644 abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2 delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy delete mode 100644 abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2 delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca delete mode 100644 abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos delete mode 100644 abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd delete mode 100644 abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive delete mode 100644 abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65 delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65 delete mode 100644 abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/DENON.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/NEC.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc delete mode 100644 abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge delete mode 100644 abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad delete mode 100644 abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc delete mode 100644 abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci delete mode 100644 abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one delete mode 100644 abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 delete mode 100644 abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo delete mode 100644 abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech delete mode 100644 abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb delete mode 100644 abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak delete mode 100644 abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878 delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster delete mode 100644 abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro delete mode 100644 abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951 delete mode 100644 abs/core-testing/live-installer/templates/remotes/receiver_usb.id delete mode 100644 abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130 delete mode 100644 abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130 delete mode 100644 abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem delete mode 100644 abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic delete mode 100644 abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek delete mode 100644 abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt delete mode 100644 abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap delete mode 100755 abs/core-testing/live-installer/templates/remotes/streamzap/lircrc delete mode 100644 abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI delete mode 100644 abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230 delete mode 100644 abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230 delete mode 100644 abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere delete mode 100644 abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote delete mode 100755 abs/core-testing/live-installer/templates/samba/smb.conf.home delete mode 100755 abs/core-testing/live-installer/templates/samba/smb.conf.media delete mode 100644 abs/core-testing/live-installer/templates/samba/smb.conf.template delete mode 100644 abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt delete mode 100644 abs/core-testing/live-installer/templates/settings/default_1/settings.txt delete mode 100644 abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt delete mode 100644 abs/core-testing/live-installer/templates/settings/default_2/settings.txt delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-core delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-core-testing delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-extra delete mode 100644 abs/core-testing/live-installer/templates/sources/mv-extra-testing delete mode 100644 abs/core-testing/live-installer/templates/sources/svc_pkg delete mode 100755 abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf delete mode 100644 abs/core-testing/live-installer/templates/xine.config.template delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.ATSC delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.DVD delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.NTSC delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.VESA delete mode 100644 abs/core-testing/live-installer/templates/xorg/modeline.custom delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.ati delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.intel delete mode 100755 abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia delete mode 100644 abs/core-testing/live-installer/templates/xorg/xorg.conf.via delete mode 100755 abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware delete mode 100755 abs/core-testing/live-installer/timezip.py delete mode 100755 abs/core-testing/live-installer/timezone.bin delete mode 100755 abs/core-testing/live-installer/xconfig.sh diff --git a/abs/core-testing/LinHES-config/LinHES-release b/abs/core-testing/LinHES-config/LinHES-release new file mode 100644 index 0000000..a4de764 --- /dev/null +++ b/abs/core-testing/LinHES-config/LinHES-release @@ -0,0 +1 @@ +LinHES R6.00.02 diff --git a/abs/core-testing/LinHES-config/LinHES.install b/abs/core-testing/LinHES-config/LinHES.install new file mode 100644 index 0000000..a0a9d31 --- /dev/null +++ b/abs/core-testing/LinHES-config/LinHES.install @@ -0,0 +1,78 @@ +# This is a default template for a post-install scriptlet. You can +# remove any functions you don't need (and this header). + +# arg 1: the new package version +pre_install() { + rm -f /etc/issue + rm -f /etc/arch-release + +} + +# arg 1: the new package version +post_install() { + if [ ! -f /etc/blacklist.package ] + then + echo "List of packages to ignore" > /etc/blacklist.package + echo "one package per line" >> /etc/blacklist.package + fi + +LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage" +LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage" +for i in "$LINE" "$LINE1" +do + cp /etc/sudoers /etc/sudoers.bak + grep -q "$i" /etc/sudoers + if [ $? != 0 ] + then + echo "$i" >> /etc/sudoers + visudo -cf /etc/sudoers + if [ ! $? = 0 ] + then + cp /etc/sudoers.bak /etc/sudoers + echo $i + echo "Error adding files" + exit 1 + fi + fi +done + + +} + +# arg 1: the new package version +# arg 2: the old package version +pre_upgrade() { + /bin/true +} + +# arg 1: the new package version +# arg 2: the old package version +post_upgrade() { + . /etc/profile + ps -ef|grep mysqld|grep -v grep + status=$? + echo "status $status" + if [ $status = 0 ] + then + restore_default_settings.sh -c load + fi + if [ ! -f /etc/blacklist.package ] + then + echo "List of packages to ignore" > /etc/blacklist.package + echo "one package per line" >> /etc/blacklist.package + fi +} + +# arg 1: the old package version +pre_remove() { + /bin/true +} + +# arg 1: the old package version +post_remove() { + /bin/true +} + +op=$1 +shift +$op $* diff --git a/abs/core-testing/LinHES-config/MythVantage.sh b/abs/core-testing/LinHES-config/MythVantage.sh new file mode 100755 index 0000000..286c908 --- /dev/null +++ b/abs/core-testing/LinHES-config/MythVantage.sh @@ -0,0 +1,3 @@ +export MV_ROOT=/usr/MythVantage +export PATH=$PATH:$MV_ROOT/bin +export TEMPLATES=$MV_ROOT/templates diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD new file mode 100755 index 0000000..5fa4e66 --- /dev/null +++ b/abs/core-testing/LinHES-config/PKGBUILD @@ -0,0 +1,63 @@ +pkgname=LinHES-config +pkgver=1.0 +pkgrel=1 +conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) +pkgdesc="Install and configure your system" +depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan) +arch=('i686') + +source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh) + +install=LinHES.install +build() { + mkdir -p $startdir/pkg/etc + mkdir -p $startdir/pkg/usr/share/mythtv/themes/default + + MVDIR=$startdir/pkg/usr/MythVantage + mkdir $startdir/pkg/etc/profile.d + install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh + mkdir -p $MVDIR/bin + mkdir -p $MVDIR/templates + mkdir -p $MVDIR/etc + +#copy in all the installer specific stuff + rsync -r --exclude=.svn ../templates $MVDIR/ + install -m0700 myth_user_call $MVDIR/bin/myth_user_call + install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh + install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh + install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh + install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh +# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh + install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh + install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh + install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh + install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh + install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh + install -m 0755 create_master.sh $MVDIR/bin/create_master.sh + install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh + install -m 0755 timezone.bin $MVDIR/bin/timezone.bin + install -m 0755 timezip.py $MVDIR/bin/timezip.py + install -m 0755 autocard.py $MVDIR/bin/autocard.py + + mkdir -p $startdir/pkg/usr/bin + install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py + #copy in the branding stuff + install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release + install -m 0755 issue $startdir/pkg/etc/issue + +# copy over the ui files + install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/ + +#copy in the binaries + #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage + install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage + cd $MVDIR/bin + ln -s MythVantage mythvantage + ln -s MythVantage mythinstall + cd - +# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect + +# install -m 0755 startx $startdir/pkg/root/startx +# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh +} + diff --git a/abs/core-testing/LinHES-config/add_service.sh b/abs/core-testing/LinHES-config/add_service.sh new file mode 100755 index 0000000..190d604 --- /dev/null +++ b/abs/core-testing/LinHES-config/add_service.sh @@ -0,0 +1,15 @@ +#!/bin/bash +SERVICE_DIR=/var/service +SCRIPT_DIR=/etc/sv +if [ -d $SCRIPT_DIR/$1 ] +then + if [ -d $SERVICE_DIR/$1 ] + then + echo "$1 already there" + else + ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1 + echo "adding $1" + fi +else + echo "couldn't find $SCRIPT_DIR/$1" +fi diff --git a/abs/core-testing/LinHES-config/autocard.py b/abs/core-testing/LinHES-config/autocard.py new file mode 100755 index 0000000..b59b8d6 --- /dev/null +++ b/abs/core-testing/LinHES-config/autocard.py @@ -0,0 +1,302 @@ +#!/usr/bin/python +# import MySQL module +#jm +import MySQLdb +import sys +import getopt +import socket +import os +import time +import string +import glob +from string import letters +from string import digits + +def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor): + global currenthostname + print Device + print Driver, + print Cardvendor + cursor = db.cursor() + insert = "false" + if Driver == "ivtv" : + cardtype="MPEG" + defaultinput="Tuner 1" + insert="true" + if Cardvendor == "pcHDTV HD3000 HDTV": + insert="false" + cardtype ="whocares" + + #print insert + if insert == "true" : + cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname)) + +def INSERTHDR_INTOMYTH(deviceid,tuner_number): + cardtype='HDHOMERUN' + defaultinput='MPEG2TS' + global currenthostname + print deviceid + print cardtype + print defaultinput + print tuner_number + cursor = db.cursor() + #print insert + cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname)) + +def INSERTAUTOCARD(): + global cardlist + global currenthostname + # create a cursor + cursor = db.cursor() + + + for i in range( 1 , len(cardlist)): + insert = "false" +# print cardlist[i] + Device=cardlist[i][0] + Driver=cardlist[i][1] + Cardvendor=cardlist[i][2] + Businfo=cardlist[i][3] + if Driver == "ivtv" : + insert="true" + devicestatus="unused" + if Cardvendor == "pcHDTV HD3000 HDTV": + insert="false" + cardtype ="whocares" + if Driver == "hdr": + insert="true" + devicestatus="unused" + + if insert == "true" : + cursor.execute("delete from autocard where uniqid=%s;",(Businfo)) + if Driver=="hdr": + Cardvendor="HDHOMERUN Tuner 1" + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + Cardvendor="HDHOMERUN Tuner 2" + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + + else: + cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) + + + +def PRINTINFO(): + global cardlist + + for list in cardlist: + if list != "_placeholder_": + print list + #print "-------------" + +def GATHER_HDR(): + global cardlist + command="/usr/bin/hdhomerun_config --discover" + results=os.popen(command,'r') + line=results.readline() + if line.strip().split()[0] == "no": + print "HDHOMERUN not detected" + else: + print line + hdrdevice=line.strip().split()[2] + print hdrdevice + Driver="hdr" + Device=hdrdevice + Cardtype="HDHOMERUN" + Businfo=hdrdevice + cardprops = [Device,Driver , Cardtype , Businfo] + cardlist.append(cardprops) + + +def GATHER_v4l_CARDS(): + global cardlist + cardlist=["_placeholder_"] + # print "Looking for v4l cards" + try: + filelist = os.listdir('/dev/v4l/') + except OSError: + filelist=" " + #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0'] + #cardlist.append(fakelist) + try: + filelist = glob.glob("/dev/v4l/video?") + Driver="" + Cardtype="" + Businfo="" + numcards = 0 + for Device in filelist: + #print card + numcards = numcards+1 + cmd = 'v4l2-ctl -D -d' + Device + for line in os.popen(cmd).readlines(): + #print line + pos = string.find(line,"Driver name") + if pos >=0: + splitline= line.split(':') + Driver=splitline[1].strip() + pos = string.find(line,"Card type") + if pos >=0: + splitline= line.split(':') + Cardtype=splitline[1].strip() + + pos = string.find(line,"Bus info") + if pos >=0: + splitline= line.split(':',1) + Businfo=splitline[1].strip() + + #print Device,Driver , Cardtype , Businfo,numcards + cardprops = [Device,Driver , Cardtype , Businfo] + cardlist.append(cardprops) + except IOError: + print "no v4l cards found" + sys.exit(2) + + +def WRITEUDEV_IVTV(): + global insertmyth + cursor = db.cursor() + #add ivtv,cid lookup loop through until empty. + cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'") + cidrows = cursor.fetchall() + for row in cidrows: + cid=row[0] + cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid)) + result = cursor.fetchone() + description=result[2] + driver='DRIVERS==\"ivtv\"' + ATTRNAME='ATTR{name}=="ivtv? encoder MPG"' + KERNELS='KERNELS==\"' + KERNELS+=cid + KERNELS+="\"" + #filter out non digit or chars + keep=letters.join(digits) + description=filter(lambda c: c in keep, description) + devnode="ivtv/" + #devnode+=description + "_" + udevcid=cid.partition(":") + devnode+=udevcid[2] + devnode+="_video" + UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"' + print "Here is the udev rule" + print UDEV_RULE + filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules' + file = open(filename,'w') + file.write(UDEV_RULE) + if ( insertmyth == "true"): + devnode="/dev/"+devnode + INSERTCARD_INTOMYTH(devnode,"ivtv",description) + cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid)) +#now insert HDR + cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'") + cidrows = cursor.fetchall() + for row in cidrows: + if ( insertmyth == "true"): + deviceid=row[0] + #cardtype="HDHOMRUN" + #defaultinput="MPEG2TS" + dbox2_port=row[1] + tuner_number=dbox2_port.rpartition(' ')[2] + INSERTHDR_INTOMYTH(deviceid,tuner_number) + cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port)) + + + +def CLEARAUTOCARD(): + cursor = db.cursor() + cursor.execute("delete from autocard") + +def RELOADUDEV(): + print "relaoding udev rules" + os.system('udevcontrol reload_rules') + os.system('rmmod ivtv') + os.system('udevtrigger') + + +def usage(): + print " -h help" + print " -g gather and print out the found cards" + print " -w write out the udev rules" + print " -i insert cards into myth that are marked will-add(only used with -w)" + print " -r reload udev rules" + print " -c clear the autocard db" + +def main(argv): + global db + global cardlist + global currenthostname + currenthostname="" + writeudev="false" + global insertmyth + insertmyth ="false" + + db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg") + try: + cursor = db.cursor() + cursor.execute("describe autocard;") + except MySQLdb.Error, e: + cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));") + print "table created" + + if ( currenthostname == "" ): + currenthostname = socket.gethostname() + + + try: + opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] ) + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + usage() + sys.exit() + elif opt in ( "-g" , "--gathercards"): + GATHER_v4l_CARDS() + GATHER_HDR() + INSERTAUTOCARD() + PRINTINFO() + elif opt in ("-w", "--writeudev"): + writeudev="true" + elif opt in ("-i", "--insert"): + insertmyth="true" + elif opt in ( "-r" , "--reloadudev"): + RELOADUDEV() + elif opt in ( "-c" , "--clearautocard"): + CLEARAUTOCARD() + + + if ( writeudev == "true"): + WRITEUDEV_IVTV() + + + + + + +if __name__ == "__main__": + main(sys.argv[1:]) + + + + + +#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50)); +#Query OK, 0 rows affected (0.14 sec) + +#mysql> describe autocard; +#+--------------+-------------+------+-----+---------+-------+ +#| Field | Type | Null | Key | Default | Extra | +#+--------------+-------------+------+-----+---------+-------+ +#| dev | varchar(50) | YES | | NULL | | +#| driver | varchar(50) | YES | | NULL | | +#| description | varchar(50) | YES | | NULL | | +#| uniqid | varchar(50) | YES | | NULL | | +#| devicestatus | varchar(50) | YES | | NULL | | +#| hostname | varchar(50) | YES | | NULL | | +#+--------------+-------------+------+-----+---------+-------+ + + + + + + + + diff --git a/abs/core-testing/LinHES-config/bpopup-ui.xml b/abs/core-testing/LinHES-config/bpopup-ui.xml new file mode 100755 index 0000000..df0598b --- /dev/null +++ b/abs/core-testing/LinHES-config/bpopup-ui.xml @@ -0,0 +1,164 @@ + + + + + + + + #ffff00 + #000000 + 24 + 3,3 + yes + + + + #9999cc + 18 + yes + + + + #ffff00 + #000000 + 18 + 3,3 + yes + + + + #ffffff + 18 + yes + + + + #ffffff + 50 + yes + + + #ff0000 + #000000 + 16 + 2,2 + yes + + + + #ffff00 + 14 + yes + + + + 0,0,800,600 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/build_diskless.sh b/abs/core-testing/LinHES-config/build_diskless.sh new file mode 100755 index 0000000..4dfd5fc --- /dev/null +++ b/abs/core-testing/LinHES-config/build_diskless.sh @@ -0,0 +1,143 @@ +#!/bin/bash +#CD=/mnt/cd +. /etc/profile +. /etc/systemconfig + +TFTP=/data/srv/tftp +CD=/data/srv/tftp/live +DESTCD=/data/srv/tftp/CD +BASE=/data/srv/tftp/masterbuild + +MODULES=$DESTCD/MythVantage/base/ +myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` +SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/ + +function log () { +echo $1 +} + +function check_xvfb () { +export DISPLAY=127.0.0.1:25 + Xvfb -ac :25 & + +} + + +function create_base_image() { +echo $SRCFILES +if [ -f $SRCFILES/data.lzm ] +then + mkdir $HOST_IMG_DIR + cd $SRCFILES + echo "Creating image.." > $BASE/tmp/.install_state + LIST=`ls *.lzm` + for i in $LIST + do + echo $i + echo $i > $BASE/tmp/.install_percent + lzm2dir $i \/$HOST_IMG_DIR + done + + for i in sys proc dev tmp + do + mkdir /$HOST_IMG_DIR/$i + done + + chmod 777 /$HOST_IMG_DIR/tmp + mknod /$HOST_IMG_DIR/dev/null c 1 3 + mknod /$HOST_IMG_DIR/dev/null c 1 5 + mknod /$HOST_IMG_DIR/dev/console c 5 1 + chmod +s /$HOST_IMG_DIR/usr/bin/Xorg + chmod +s /$HOST_IMG_DIR/usr/bin/crontab + chmod +s /$HOST_IMG_DIR/usr/bin/sudo + chmod +s /$HOST_IMG_DIR/bin/mount + #copy fstab from masterbuild + cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab + echo "Done: installing data" > $BASE/tmp/.install_state + return 0 +else + echo "Error: no modules" > $BASE/tmp/.install_state + log "couldn't find modules to install" + return 1 +fi +} + +function configure_image () { + echo "Configuring system" > $BASE/tmp/.install_state + cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig + chown root:mythtv $HOST_IMG_DIR/etc/systemconfig + chmod 775 "$HOST_IMG_DIR" /etc/systemconfig + cp /etc/mtab $HOST_IMG_DIR/etc/mtab + mount --bind /dev $HOST_IMG_DIR/dev + + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install +#copy syssettings template to here. + SE=$BASE$TEMPLATES/settings/syssettings + mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings + cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings + chown root:mythtv $HOST_IMG_DIR/etc/systemconfig + chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings + chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings +#update remotedb with this host settings + OLDDISPLAY=$DISPLAY + check_xvfb + chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1 + chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + if [ ! $? = 0 ] + then + touch $mountpoint/tmp/.dbsysfailed + chmod 777 $mountpoint/tmp/.dbsysfailed + else + #Run second time + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install + chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + fi +chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install +cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf +echo "Done" > $BASE/tmp/.install_state +DISPLAY=$OLDDISPLAY + +#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/ +} + +function create_tftp_boot () { + + CFGFILE=$TFTP/pxelinux.cfg/01-$2 + echo "DEFAULT mythfe" > $CFGFILE + echo "LABEL mythfe" >> $CFGFILE + echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE + echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE + echo "TIMEOUT 2" >> $CFGFILE +} + +function create_nfs_export () { +echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports +exportfs -arv +} + +#-------------------------------------------------------------------------------MAIN PROGRAM --------------------------------------------------------------------- +if [ x$1 = x -o x$2 = x ] +then + echo "usage: hostname macaddress" + exit 1 +fi + +image_name=$1 +mac_address=`echo $2| tr "[:upper:]" "[:lower:]"` + +echo "using image_name of $image_name" +echo "using mac_address of $mac_address" + +HOST_IMG_DIR=$TFTP/$1 + +create_base_image $image_name +configure_image +umount $HOST_IMG_DIR/dev +create_tftp_boot $image_name $mac_address +create_nfs_export $image_name + + + + +#create_dhcp_entry $mac_address + diff --git a/abs/core-testing/LinHES-config/checkout_MythVantage.sh b/abs/core-testing/LinHES-config/checkout_MythVantage.sh new file mode 100755 index 0000000..764e418 --- /dev/null +++ b/abs/core-testing/LinHES-config/checkout_MythVantage.sh @@ -0,0 +1,47 @@ +#!/bin/bash +MYDIR=`pwd` +MYTHPATH="\/data\/LinHES-PKGBUILD\/abs\/core-testing\/mythtv\/stable\/mythtv\/src\/mythtv-0.21" + +function setup_links { +rm mythinstall.bin +rm mythbeselect.bin +ln -s $MYDIR/src/MythVantage-app/mythinstall/mythinstall ./mythinstall.bin +ln -s $MYDIR/src/MythVantage-app/mythbeselect/mythbeselect ./mythbeselect.bin +} + +function dl_repo { +mkdir src +cd src +if [ ! -d MythVantage-app ] +then + git clone http://mythvantage.com/MythVantage-app.git/ + cd MythVantage-app + git checkout --track -b LinHES origin/LinHES + cd $MYDIR + setup_links + cd - +else + echo "updating exisiting tree" + cd MythVantage-app + git pull + git checkout master + git merge + cd - +fi + +cd MythVantage-app +git checkout master +#git checkout origin/LinHES + +} + +dl_repo +sed -i "s/^MYTHPATH.*$/MYTHPATH\=\"$MYTHPATH\"/g" $MYDIR/src/MythVantage-app/mythinstall/mythinstall.pro +sed -i "s/#define __MVAPP__/\/\/#define __MVAPP__/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h +sed -i "s/mythvantage/LinHES/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h + +cd $MYDIR/src/MythVantage-app/mythinstall && qmake +make || exit 1 +cd $MYDIR/src/MythVantage-app/mythbeselect && qmake +make ||exit 1 + diff --git a/abs/core-testing/LinHES-config/create_master.sh b/abs/core-testing/LinHES-config/create_master.sh new file mode 100755 index 0000000..1e641b4 --- /dev/null +++ b/abs/core-testing/LinHES-config/create_master.sh @@ -0,0 +1,57 @@ +#!/bin/bash +#CD=/mnt/cd +CD=/data/srv/tftp/live +DESTCD=/data/srv/tftp/CD +DEST=/data/srv/tftp/masterbuild +MODULES=$DESTCD/MythVantage/base/ +myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + +mkdir -p $DESTCD +mkdir -p $DEST + +mount $CD +status=0 +if [ -f $CD/MythVantage/base/data.lzm ] +then + status=0 +else + status=1 +fi +if [ x$status = x0 ] +then + echo "copying to disk" + cp -rp $CD/* $DESTCD + cd $MODULES + for i in *.lzm + do + echo $i + lzm2dir $i \/$DEST + done + for i in sys proc dev tmp + do + mkdir $DEST/$i + done + chmod 777 /$DEST/tmp + mknod $DEST/dev/null c 1 3 + mknod $DEST/dev/null c 1 5 + mknod $DEST/dev/console c 5 1 + chmod +s $DEST/usr/bin/Xorg + chmod +s $DEST/usr/bin/crontab + chmod +s $DEST/usr/bin/sudo + chmod +s $DEST/bin/mount +fi +if [ ! -f $DEST/etc/fstab.bak ] +then + cp $DEST/etc/fstab $DEST/etc/fstab.bak +fi +tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab +echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab +echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports + + +exportfs -arv + +#copy in the modules +mkdir -p $DEST/mnt/live/mnt/ +mv $DESTCD/* $DEST/mnt/live/mnt/ + diff --git a/abs/core-testing/LinHES-config/file_time_offset.py b/abs/core-testing/LinHES-config/file_time_offset.py new file mode 100755 index 0000000..f2973d0 --- /dev/null +++ b/abs/core-testing/LinHES-config/file_time_offset.py @@ -0,0 +1,39 @@ +#!/usr/bin/python + + +import time +import os +import glob +import getopt +import sys +def main(argv): + filecount=0 +# root = "/tmp" +# offset = 4 + now = int(time.time()) + + + try: + opts, args = getopt.getopt(argv, "hs:d:") + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + print "-s seconds -d /testdir" + print "default if 4 seconds" + sys.exit() + elif opt in ( "-s" ): + offset = int(arg) + elif opt in ("-d"): + root = arg + + for item in glob.glob(root+"/*"): + lastmodDate = os.path.getmtime(item) + tdiff= now-lastmodDate + #print tdiff, offset + + if tdiff > offset: + filecount+=1 + print filecount +if __name__ == "__main__": + main(sys.argv[1:]) diff --git a/abs/core-testing/LinHES-config/install-ui.xml b/abs/core-testing/LinHES-config/install-ui.xml new file mode 100755 index 0000000..0ec9ddb --- /dev/null +++ b/abs/core-testing/LinHES-config/install-ui.xml @@ -0,0 +1,175 @@ + + + + + + + + #ffff00 + #000000 + 24 + 3,3 + yes + + + + #9999cc + 18 + yes + + + + #ffff00 + #000000 + 18 + 3,3 + yes + + + + #ffffff + 18 + yes + + + + #ffffff + 50 + yes + + + #ff0000 + #000000 + 16 + 2,2 + yes + + + + #ffff00 + 14 + yes + + + #9999cc + 12 + no + + + + 0,0,800,600 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/install_db_chroot.sh b/abs/core-testing/LinHES-config/install_db_chroot.sh new file mode 100755 index 0000000..514dd3c --- /dev/null +++ b/abs/core-testing/LinHES-config/install_db_chroot.sh @@ -0,0 +1,52 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +#myhost=`cat /etc/hostname` +myhost=$hostname +hostname $myhost +mount -t proc none /proc +pacman --noconfirm -Sf mysql +/etc/rc.d/mysqld + +status=1 +mysqlstatus=1 +while [ ! $status = 0 ] +do + /etc/rc.d/mysqld stop + sleep 1 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + $MV_ROOT/bin/restore_default_settings.sh -c load + DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 + $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install + if [ $SystemType = "Master_backend" ] + then + $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + fi + #update database to allow user jobs on this host. + $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW + $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + #if [ -d /data/srv/mysql/mythconverg ] + if [ -d /var/lib/mysql/mythconverg ] + then + # pacman --noconfirm -R webcalendar + # pacman --noconfirm --nodeps -S webcalendar + status=0 + fi + fi + fi +done +#/etc/rc.d/mysqld stop +#umount /proc + + + diff --git a/abs/core-testing/LinHES-config/install_functions.sh b/abs/core-testing/LinHES-config/install_functions.sh new file mode 100755 index 0000000..e5912da --- /dev/null +++ b/abs/core-testing/LinHES-config/install_functions.sh @@ -0,0 +1,449 @@ +#!/bin/bash +. /etc/profile +disk=$2 +mountpoint=new_boot + +#------------------------------------------- +MYTHDBUSER=mythtv +MYTHTVPASSWD=mythtv +CMDLINE=$(cat /proc/cmdline) +hostname=`hostname` +MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec" +BASE="" + +function update_db_settings () { + + $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";" +} + +function random_theme () { +THEMES="basic-blue +basic-green +basic-red +basic-purple +basic-amber" + +theme=($THEMES) # Read into array variable. + +num_themes=${#theme[*]} # Count how many elements. + +pick=${theme[$((RANDOM%num_themes))]} +echo "Selected $pick as the theme" +update_db_settings Theme "$pick" +} + + +function setupremote { + mv -f $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` 2>/dev/null + if [ -d $TEMPLATES/remotes/$Remotetype ] + then + cd $TEMPLATES/remotes/$Remotetype + for i in lircd* + do + cat $i >> $BASE/etc/lircd.conf + done + cp -f lircrc* $BASE/etc/lircrc + chmod 755 /etc/lircrc + update_db_settings HostRemoteType "$Remotetype" + /usr/sbin/lircd -d /dev/lirc0 + mkdir /root/.mythtv + ln -s /etc/lircrc /root/.mythtv/lircrc + fi +} + +function scan_for_usb_remote () { +echo "Scanning for usb receiver/remote" +while read line +do + USBID=`echo "$line"|cut -d"|" -f1` + lsusb -d "$USBID" > /dev/null 2>/dev/null + if [ $? = 0 ] + then + Remotetype=`echo "$line"|cut -d"|" -f2` + echo "found $Remotetype" + setupremote + break + fi +done <$BASE/$TEMPLATES/remotes/receiver_usb.id +} + +function rest_of_network () { + #netmask + echo $CMDLINE | grep -q netmask + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*netmask=} + NETMASK=${TEMPVAR%% *} + /sbin/ifconfig eth0 $IP netmask $NETMASK + nm=`/usr/bin/nmconv.py -obits $NETMASK` + NETMASK="/$nm $NETMASK" + echo $NETMASK + update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK" + else + echo "netmask not found" + fi + #gateway + echo $CMDLINE | grep -q gateway + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*gateway=} + GATEWAY=${TEMPVAR%% *} + /sbin/route add default gw $GATEWAY + update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY" + + else + echo "gateway not found" + fi + + #dns + echo $CMDLINE | grep -q dns + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*dns=} + DNS=${TEMPVAR%% *} + echo "nameserver $DNS" >> /etc/resolv.conf + update_db_settings HostDNS${MYTHDEFAULT} "$DNS" + else + echo "DNS not found" + fi +} + +function init_network { + echo $CMDLINE |grep -q netdev + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*netdev=} + MYTHDEFAULT=${TEMPVAR%% *} + else + MYTHDEFAULT="eth0" + fi + + + + echo $CMDLINE | grep -q ip + if [ $? = 0 ] + then + update_db_settings HostDefaulteth0 0 + update_db_settings HostDefault${MYTHDEFAULT} 1 + + update_db_settings HostActiveonbooteth0 0 + update_db_settings HostActiveonboot${MYTHDEFAULT} 1 + update_db_settings HostNetDevice ${MYTHDEFAULT} + + TEMPVAR=${CMDLINE#*ip=} + IP=${TEMPVAR%% *} + if [ x$IP = xdhcp ] + then + /sbin/dhcpcd $MYTHDEFAULT + update_db_settings HostUseDHCP${MYTHDEFAULT} 0 + else + /sbin/ifconfig ${MYTHDEFAULT} $IP + update_db_settings HostUseDHCP${MYTHDEFAULT} 1 + update_db_settings HostIP${MYTHDEFAULT} "$IP" + rest_of_network + fi + fi +} + +function init_remote { + echo $CMDLINE | grep -q remoteport + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*remoteport=} + REMOTEPORT=${TEMPVAR%% *} + if [ x"$ReceiverType" = "xSerial" ] + then + if [ -e /dev/$REMOTEPORT ] + then + /usr/bin/setserial /dev/$REMOTEPORT uart none + /sbin/modprobe lirc_serial + update_db_settings HostReceiverType Serial + update_db_settings HostSerialPortlirc "$REMOTEPORT" + fi + fi + + fi + + echo $CMDLINE | grep -q remote + if [ $? = 0 ] + then + TEMPVAR=${CMDLINE#*remote=} + Remotetype=${TEMPVAR%% *} + setupremote + else + scan_for_usb_remote + fi +} + +#----------------------- + +#set -x + +partition_it () { +ROOT=$1 +DATA=$2 +SWAP=$3 + +if [ ! x$SWAP = xNO ] + then + SWAPLINE=",$SWAP,S" + MKSWAPCMD="mkswap /dev/${disk}2" + else + SWAPLINE=",0,0" + MKSWAPCMD="" + fi + +if [ x$DATA = xALL ] +then + DATALINE=",,," + EXTRALINE="" +else + DATALINE=",$DATA,," + EXTRALINE=",0,," +fi +sfdisk /dev/$disk -uM << EOF +,$1,,* +$SWAPLINE +$DATALINE +$EXTRALINE +; +EOF + +$MKSWAPCMD +#sfdisk -l /dev/$disk +} + + +function fscmd () { + +case $1 in + reiserfs) FSCMDC="mkreiserfs -q -l ROOT" + ;; + + xfs) FSCMDC="mkfs -t $1 -f" + ;; + ext3) FSCMDC="mkfs.ext3" + ;; + jfs) FSCMDC="mkfs.jfs -q " + ;; + *) FSCMDC="echo $1" + ;; + +esac +} + +format_it () { + fscmd $1 + $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n + fscmd $2 + $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n +} + +mount_it () { + if [ ! -d \/$mountpoint ] + then + mkdir \/$mountpoint + fi + mount /dev/${disk}1 \/$mountpoint + mkdir \/$mountpoint/myth + mount /dev/${disk}3 \/$mountpoint/myth +} + +unmount_it () { + umount /dev/${disk}1 + umount /dev/${disk}3 +} + + +copy_it () { + + if [ x$1 = xALL ] + then + echo "Transferring system" + unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf + else + echo "Upgrading system" + unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf + fi + + for i in sys proc dev tmp + do + mkdir /$mountpoint/$i + + done + chmod 777 /$mountpoint/tmp + mknod /$mountpoint/dev/null c 1 3 + mknod /$mountpoint/dev/null c 1 5 + mknod /$mountpoint/dev/console c 5 1 + chmod +s /$mountpoint/usr/bin/Xorg + chmod +s /$mountpoint/usr/bin/crontab + chmod +s /$mountpoint/usr/bin/sudo + chmod +s /$mountpoint/bin/mount + +} + + +device_node () { + cd /dev + mknod hda b 3 0 + mknod hda1 b 3 1 + mknod hda2 b 3 2 + mknod hda3 b 3 3 + mknod hda4 b 3 4 + mknod hda5 b 3 5 + mknod hda6 b 3 6 + mknod hda7 b 3 7 + mknod hda8 b 3 8 + mknod sda b 8 0 + mknod sda1 b 8 1 + mknod sda2 b 8 2 + mknod sda3 b 8 3 + mknod sda4 b 8 4 + mknod sda5 b 8 5 + mknod sda6 b 8 6 + mknod sda7 b 8 7 + mknod sda8 b 8 8 + mknod sdb b 8 16 + mknod sdb1 b 8 17 + mknod sdb2 b 8 18 + mknod sdb3 b 8 19 + mknod sdb4 b 8 20 + mknod sdb5 b 8 21 + mknod sdb6 b 8 22 + mknod sdb7 b 8 23 + mknod sdb8 b 8 24 + cd - + } + + +function create_fstab() +{ +echo "creating fstab" +cat > /$mountpoint/etc/fstab << EOF +# +none /dev/pts devpts defaults 0 0 +none /dev/shm tmpfs defaults 0 0 +/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0 +/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0 +UUID=ROOTUID / auto defaults 0 1 +UUID=DATAUID /myth auto defaults 0 1 +UUID=SWAPUID swap swap defaults 0 0 +EOF + + +} + + +function find_uuid() { + uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2` + echo $uuid for $1 + FOUNDUUID=$uuid + +} + + +case $1 in + partition_it ) + #drive ROOT DATA(ALL) SWAP(NO) + for i in `mount | grep $disk | awk ' { print $1 } '` + do + umount $i + done + swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '` + swapoff $swap + partition_it $3 $4 $5 + exit 0 + + ;; + format_it ) + device_node + + format_it $3 $4 + exit 0 + ;; + mount_it ) + mount_it + ;; + copy_it ) + copy_it $3 + + ;; + + + fstab_fix_it) + echo $@ >> /tmp/fstab.input + if [ ! -f /$mountpoint/etc/fstab ] + then + create_fstab + fi + #was 5 + if [ x$3 = xUPGRADE ] + then + if [ ! -f /tmp/etc/KnoppMyth-version ] + then + if [ -f /tmp/etc/fstab ] + then + cp -f /tmp/etc/fstab /$mountpoint/etc/fstab + else + create_fstab + fi + else + create_fstab + fi + fi + + #search for UUID + FOUNDUUID="" + find_uuid ${2}1 + ROOTUUID=$FOUNDUUID + echo "--" + echo $ROOTUUID + echo "--" + FOUNDUUID="" + find_uuid ${2}2 + SWAPUUID=$FOUNDUUID + + FOUNDUUID="" + find_uuid ${2}3 + DATAUUID=$FOUNDUUID + + + sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab + sed -i -e "s/.*\/myth\ .*$/UUID=$DATAUUID \/myth auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab + sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab + +#if Knoppmyth upgrade then loop through old fstab picking out vg + if [ -f /tmp/etc/KnoppMyth-version ] + then + if [ -f /tmp/etc/fstab ] + then + grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab + grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir + grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs chown -R mythtv:users + fi + fi + ;; + + grub_it ) + grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)" + #fixing grub/menu.1st + FOUNDUUID="" + find_uuid ${disk}1 + ROOTUUID=$FOUNDUUID + sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst + mkinitcpio -g /$mountpoint/boot/kernel26.img + ;; + umount_it) + umount \/$mountpoint/myth + umount \/$mountpoint + ;; + update_db_it ) + update_db_settings "$2" "$3" + ;; + + +esac + + + diff --git a/abs/core-testing/LinHES-config/install_proxy.sh b/abs/core-testing/LinHES-config/install_proxy.sh new file mode 100755 index 0000000..bc89a1d --- /dev/null +++ b/abs/core-testing/LinHES-config/install_proxy.sh @@ -0,0 +1,526 @@ +#!/bin/bash +#chroot and /tmp +MVHOSTNAME=larch5 +. /etc/profile +TEMP_TEMPLATES=/tmp/templates +disk=$2 +rootfs=$3 +rootsize=$4 +datafs=$5 +datasize=$6 +swapsize=$7 +mountpoint="/new_boot" +run=$MV_ROOT/bin/install_functions.sh +. /etc/systemconfig 2>/dev/null +. $MV_ROOT/bin/networkconfig.sh +CMDLINE=$(cat /proc/cmdline) + +#TEMPNET="Hostip"$default_interface +#eval MYTHIP=\$${TEMPNET} + + +progress () { +mypercent=`echo "$1" | cut -d. -f1` +if [ x$mypercent = x ] +then +echo "" > /tmp/.install_percent +else +echo "${mypercent}% complete" > /tmp/.install_percent +fi + + +} + +function apply_new_auth () { +#check if file is present + if [ -f /root/myth_user_call.out ] + then + #read in file, running each command in chroot + exec 4 /tmp/user_auth.update + fi + done + rm -f /root/myth_user_call.out + else + echo "No new password changes to apply" + fi +} + + +function backup_sql_check { + + if [ -f $mountpoint/myth/backup/mythconverg.sql.gz ] + then + return 0 + else + return 1 + fi +} + +function upgrade_mount_search { + MYTH_P=`cat /tmp/etc/fstab |grep /myth| awk ' {print $1 '} ` + umount $mountpoint/myth + mount $MYTH_P $mountpoint/myth + return 0 + +} + + +full_install () { + if [ -f /tmp/.this_is_upgrade ] + then + rm /tmp/.this_is_upgrade + fi + echo "Partitioning $disk" > /tmp/.install_state + progress 1 + sleep 1 + $run partition_it $disk $rootsize $datasize $swapsize + + echo "Formating $disk" > /tmp/.install_state + progress 2 + sleep 1 + $run format_it $disk $rootfs $datafs + + echo "Preparing $disk" > /tmp/.install_state + progress 3 + sleep 1 + $run mount_it $disk + + startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` + + echo "STARTSIZE=$startsize">/tmp/.startsize.io + echo "Installing data" > /tmp/.install_state + + sleep 1 + $run copy_it $disk ALL + rm $mountpoint/etc/fstab + $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL + + progress 99 + sleep 1 + $run grub_it $disk + + + echo "Configuring system" > /tmp/.install_state + progress 100 + sleep 1 + cp -f /etc/systemconfig "$mountpoint"/etc + #run save syssettings to save settings, then copy to new mountpoint + $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost + SE=$TEMPLATES/settings/syssettings + mkdir -p ${mountpoint}$SE + cp -rp $SE/* ${mountpoint}$SE/ + chown root:mythtv "$mountpoint"/etc/systemconfig + chown -R mythtv:mythtv ${mountpoint}$SE + + chmod -R 775 ${mountpoint}$SE + chmod 775 "$mountpoint"/etc/systemconfig + #copy over any updates that might have occured + cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + chmod -R 755 ${mountpoint}/root + cp /etc/mtab "$mountpoint"/etc/mtab + apply_new_auth + + + if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] + then + #installing DB to local machine + #turn off old live database, so the chroot one can start + /etc/rc.d/mysqld stop + mount --bind /dev "$mountpoint/dev" + chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + echo "stopping mysql in chroot" + chroot "$mountpoint" /etc/rc.d/mysqld stop + umount "$mountpoint/dev" + + #/etc/rc.d/mysqld start + else + #update remotedb with this host settings + chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + if [ ! $? = 0 ] + then + touch $mountpoint/tmp/.dbsysfailed + chmod 777 $mountpoint/tmp/.dbsysfailed + else + #Run second time + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL + fi + fi + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced + touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure + + echo "Done" > /tmp/.install_state + cp /tmp/mythvantage_install.log $mountpoint/var/log/ + $run unmount_it $disk +} + +function createsquashlist(){ +if [ -f $1 ] +then + rm -f +$1 +fi +for i in bin boot etc home lib opt root sbin usr var +do +echo $i >> $1 +done + + +} + + + + +function upgrade () { + touch /tmp/.this_is_upgrade + + if [ ! x$rootfs = "xDo_not_format" ] + then + echo "Formating $disk" > /tmp/.install_state + progress 2 + sleep 1 + $run format_it $disk $rootfs NO + fi + echo "Preparing $disk" > /tmp/.install_state + progress 3 + sleep 1 + $run mount_it $disk + startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` + echo "STARTSIZE=$startsize">/tmp/.startsize.io + echo "Installing data" > /tmp/.install_state + sleep 1 + cp -rf /tmp/etc /new_boot/etc.old + cp -rf /tmp/oss /new_boot/var/lib/oss.old + + + SQUASHLIST="/tmp/.squashlist" + createsquashlist $SQUASHLIST + $run copy_it $disk $SQUASHLIST + #copy back ssh keys + + cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ + cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/ + cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/ + cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/ + + if [ ! -f /tmp/etc/KnoppMyth-version ] + then + #passwd/shadow/group + cp -fp /new_boot/etc.old/passwd /new_boot/etc/ + cp -fp /new_boot/etc.old/shadow /new_boot/etc/ + cp -fp /new_boot/etc.old/group /new_boot/etc/ + fi + + if [ x$rootfs = "xDo_not_format" ] + then + rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '` + fi + $run fstab_fix_it $disk UPGRADE + + echo "Writing boot sector" > /tmp/.install_state + progress 99 + sleep 1 + $run grub_it $disk + + echo "Configuring system" > /tmp/.install_state + progress + sleep 1 + cp /etc/mtab "$mountpoint"/etc/mtab + cp -f /etc/systemconfig "$mountpoint"/etc +#make sure mythconverg.sql.gz is present + if [ ! backup_sql_check ] + then + upgrade_mount_search + fi + + if [ -f /tmp/etc/KnoppMyth-version ] + then + #run save syssettings to save settings, then copy to new mountpoint + $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost + SE=$TEMPLATES/settings/syssettings + mkdir -p ${mountpoint}$SE + cp -rp $SE/* ${mountpoint}$SE/ + chown root:mythtv "$mountpoint"/etc/systemconfig + chown -R mythtv:mythtv ${mountpoint}$SE + chmod -R 775 ${mountpoint}$SE + touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade + fi + + cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ + chmod -R 755 ${mountpoint}/root + chown root:mythtv "$mountpoint"/etc/systemconfig + chmod 775 "$mountpoint"/etc/systemconfig + #mount /proc and /dev + mount --bind /dev "$mountpoint/dev" + mount --bind /proc "$mountpoint/proc" + + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + #wrap this in a network check_network, no need to update the db if the import worked. +##### do I need to start mysql? + /etc/rc.d/mysqld stop + chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" > /tmp/chrootdb_km.out + if [ -f /tmp/etc/KnoppMyth-version ] + then + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings + else + chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings + fi + # + #Run second time + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install + chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install + apply_new_auth + umount "$mountpoint/dev" + umount "$mountpoint/proc" + + echo "Done" > /tmp/.install_state + cp /tmp/mythvantage_install.log $mountpoint/var/log/ + + $run unmount_it $disk + /etc/rc.d/mysqld start +} + +function netboot-full_install () { + TEMPVAR=${CMDLINE#*nfsroot=} + NFSROOT=${TEMPVAR%% *} + NFSROOT=`echo $NFSROOT|cut -d: -f1` + MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -` + URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC" + echo "calling $URL" + echo "Starting" > /tmp/.install_state + curl $URL + ${MV_ROOT}/bin/xconfig.sh +} + +function killdhcp () { +if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] + then + pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` + kill -9 $pid + rm -f /etc/dhcpc/dhcpcd-eth0.pid + rm -f /var/run/dhcpcd* + fi +if [ -f /var/run/dhcpcd-eth0.pid ] + then + pid=`cat /var/run/dhcpcd-eth0.pid` + kill -9 $pid + rm -f /var/run/dhcpcd-eth0.pid* + fi +ip address flush dev eth0 +} + + + +function SANE_SYSETTINGS () { +sed -e '/HOSTrootfstype/d' \ + -e '/HOSTrootfstype/d' \ + -e '/HOSTdatafstype/d' \ + -e '/HOSTOSsize/d' \ + -e '/HostUseALLdata/d' \ + -e '/HOSTDATAsize/d' \ + -e '/HOSTuprootfstype/d' \ + -e '/HostUseSWAP/d' \ + -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new + mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt +} + +case $1 in + full_install_it ) full_install ;; + + NETBOOT) +echo "-----------------------------------------------------------------------3-----" + netboot-full_install ;; + + find_update) + #TRY TO mount first partition of drive + #copy /etc/systemconfig to live, import settings into db + #umount drive + $run mount_it $disk + if [ -f /new_boot/etc/systemconfig ] + then + ###########ADD templates + mkdir -p $TEMP_TEMPLATES + cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES + SANE_SYSETTINGS + cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/ + cp /new_boot/etc/systemconfig /etc/systemconfig + cp -rf /new_boot/etc /tmp/etc + cp -rf /new_boot/var/lib/oss /tmp/oss + + $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 + else + cp -rf /new_boot/etc /tmp/etc + #now we search for the timezone and try to update + TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1` + TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -` + + + if [ $TZREGION = $TZSUB ] + then + $run update_db_it HostTimeZoneRegion "$TZREGION" + else + $run update_db_it HostTimeZoneRegion "$TZREGION" + $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB" + fi + + + + fi + + + + $run umount_it $disk + ;; + + upgrade_it) + #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&" + upgrade + + ;; + disk_model_it) + model="unknown" + size="xxx" + case $2 in + + h* ) + model=`cat /proc/ide/$2/model` + ;; + s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` + ;; + esac + size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` + + + echo ""$model" $size " >/tmp/model + + ;; + network_check_it) + #Should never return from check_network + case $2 in + setup_network) + vnc_check + install_network_setup + ;; + + check_self) + myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + ping -c 1 $myipdefault + if [ ! $? = 0 ] + then + exit 3 + #can't ping yourself + fi + ;; + check_gw) + #check gateway + mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'` + if [ ! x$mygwdefault = x ] + then + ping -c 1 $mygwdefault + if [ ! $? = 0 ] + then + exit 4 + fi + fi + ;; + check_ns) + #check nameserver + mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` + ping -c 1 $mydns + if [ ! $? = 0 ] + then + exit 5 + fi + ;; + check_names) + host google.com + if [ ! $? = 0 ] + then + exit 6 + fi + ;; + host_names) + #if host is found, then check to see if it's online + #if not online, assume it's ok to use this hostname + + hout=`host $hostname` + status=$? + #found host, now grab the ip + if [ $status = 0 ] + then + hoip=`echo $hout|awk '{print $4}'` + ping -c 1 $hoip + if [ $? = 0 ] + then + status=0 + else + status=1 + fi + fi + + if [ $status = 0 ] + then + exit 7 + fi + + + ;; + + esac + exit 0 + ;; + + + * ) + state=`cat /tmp/.install_state` + if [ x"${state}" = "xConfiguring system" ] + then + progress "" + else + + if [ -f /tmp/.startsize.io ] + then + . /tmp/.startsize.io + #finding the drive + ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 ` + used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "` + used=`echo $used-$STARTSIZE|bc` + #echo $used + fi + + if [ ! x$used = x ] + then + . /root/.install_size + #somehow find if it's an install or update + if [ -f /tmp/.this_is_upgrade ] + then + total=$UPGRADESIZE + else + total=$TOTALSIZE + fi + percent=`echo "scale=2 ; ($used/$total) * 100 " |bc ` + cond2=$(echo "$percent > 100" |bc ) + if [ $cond2 -eq 1 ] + then + percent=100 + fi + cond3=$(echo "$percent < 3" |bc ) + if [ $cond3 -eq 0 ] + then + progress $percent + fi + fi + fi + ;; +esac + + + diff --git a/abs/core-testing/LinHES-config/issue b/abs/core-testing/LinHES-config/issue new file mode 100644 index 0000000..3c01679 --- /dev/null +++ b/abs/core-testing/LinHES-config/issue @@ -0,0 +1 @@ +LinHes \ No newline at end of file diff --git a/abs/core-testing/LinHES-config/live-install.sh b/abs/core-testing/LinHES-config/live-install.sh new file mode 100755 index 0000000..573bb1f --- /dev/null +++ b/abs/core-testing/LinHES-config/live-install.sh @@ -0,0 +1,28 @@ +#!/bin/bash +#redirect stderr to stdout, then rediret stdout to file +. /etc/profile +exec 2>&1 +exec > /tmp/mythvantage_install.log +. /etc/X11/STBWINDOWMANAGER +/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 +keylaunch & +/usr/bin/tilda & +/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & +export MALLOC_CHECK_=0 +if [ -f /opt/vmware/bin32/vmware-user-wrapper ] +then + /opt/vmware/bin32/vmware-user-wrapper & +fi +xhost + +CMDLINE=$(cat /proc/cmdline) +echo $CMDLINE |grep -q nfsroot +NFSROOT=$? +if [ x$NFSROOT = x1 ] +then + + unbuffer MythVantage & +else + NETBOOT=YES MythVantage & +fi + +exec $STBWINDOWMANAGER diff --git a/abs/core-testing/LinHES-config/myth_user_call b/abs/core-testing/LinHES-config/myth_user_call new file mode 100644 index 0000000..d95e468 --- /dev/null +++ b/abs/core-testing/LinHES-config/myth_user_call @@ -0,0 +1,164 @@ +#!/bin/bash +#Wrapper script to manage USERNAME accounts + web security +# myth_USERNAME_all -c add -u USERNAME +# myth_USERNAME_all -c delete -u USERNAME +# myth_USERNAME_all -c pass -u USERNAME -p pass +# myth_USERNAME_all -c web -u USERNAME -p pass + +INIT_CHECK=TRUE +FULL_CALL="$@" +function CHROOT_CHECK { + INIT=`ps -p 1 -o comm=` + if [ x$INIT = xrunit ] + then + CHROOT_NEEDED=FALSE + else + CHROOT_NEEDED=TRUE + fi +} + +function store_commands () { + echo "$FULL_CALL" >> /root/myth_user_call.out + chmod 600 /root/myth_user_call.out +} + + +function add_user() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to add user" + store_commands + else + echo "adding user $USERNAME" + useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users + fi + +} + + +function del_user() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to delete user" + store_commands + else + echo "removing user $USERNAME" + userdel $USERNAME + fi + +} + + +function pass_change() { + if [ $CHROOT_NEEDED = TRUE ] + then + echo "calling myth_call_user in chroot to change password" + store_commands + else + echo "changing password for $USERNAME" + echo $USERNAME:$PASSWORD | chpasswd + fi + +} + + +function web_security { + echo "this is just a stub" + +} + +function ARG_ERR() { + if [ x$OPTARG = "x" ] + then + echo "$SWITCH NEEDS AND ARG" + exit 11 + fi +} + + +function print_help { + + echo "Valid options are:" + echo " -c (add|delete|pass|web)" + echo " -u USERNAMEname" + echo " -p password" + exit 1 +} + +if [ $# -eq 0 ] +then + print_help +fi + +declare -r OPTSTRING="c:u:p:i" +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + + c) ARG_ERR + OPERATION=$OPTARG + ;; + u) ARG_ERR + USERNAME=$OPTARG + ;; + p) ARG_ERR + PASSWORD=$OPTARG + ;; + i) INIT_CHECK=FALSE + + esac +done + +if [ $INIT_CHECK = TRUE ] +then + CHROOT_CHECK +else + CHROOT_NEEDED=FALSE +fi + +case $OPERATION in + add) + if [ x$USERNAME = x ] + then + print_help + fi + add_user + ;; + delete) + if [ x$USERNAME = x ] + then + print_help + fi + del_user + ;; + pass) + if [ x$USERNAME = x ] + then + print_help + fi + + if [ x$PASSWORD = x ] + then + print_help + fi + pass_change + ;; + + web) + if [ x$USERNAME = x ] + then + print_help + fi + + + if [ x$PASSWORD = x ] + then + print_help + fi + echo "adding webUSERNAME $USERNAME with $PASS" + ;; + *) print_help + ;; +esac + + diff --git a/abs/core-testing/LinHES-config/networkconfig.sh b/abs/core-testing/LinHES-config/networkconfig.sh new file mode 100644 index 0000000..61a7405 --- /dev/null +++ b/abs/core-testing/LinHES-config/networkconfig.sh @@ -0,0 +1,280 @@ +#!/bin/bash +#. /etc/profile +#. /etc/systemconfig +#BASE=/tmp +ETCNETDIR=$BASE/etc/net/ifaces + + + +function kill_dhcp () +{ +for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid +do + if [ -f ${i} ] + then + pid=`cat ${i}` + kill -9 $pid + rm -f ${i} + fi + if [ x$1 = xflush ] + then + for ifdev in eth0 wlan0 eth1 wlan1 + do + echo ${i} |grep $ifdev + status=$? + if [ $status = 1 ] + then + ip address flush $ifdev + fi + done + fi + +done + +} + +function setup_nameserver(){ +grep -q $1 ${BASE}/etc/resolv.conf +status=$? +if [ ! $status = 0 ] +then + echo "nameserver $1" >> ${BASE}/etc/resolv.conf +fi + +} + +function setup_interfaces() { + local IS_WIRELESS + local ip + local netmask + local isactive + local dns + local UseDHCP + local GW + local ESSID + local KEY + local ENCRYPT + local TEMPNET + IS_WIRELESS=false + + #local ip + TEMPNET="Hostip"$1 + echo $TEMPNET + eval ip=\$${TEMPNET} + + TEMPNET=Hostnetmask$1 + eval netmask=\$${TEMPNET} + netmask=`echo "$netmask" | cut -d " " -f1` + + TEMPNET=HostActive$1 + eval isactive=\$${TEMPNET} + + TEMPNET=HostDNS$1 + eval dns=\$${TEMPNET} + + TEMPNET="HostUSEDHCP"$1 + eval UseDHCP=\$${TEMPNET} + + TEMPNET=HostGW$1 + eval GW=\$${TEMPNET} + + + + if [ $1 = wlan0 -o $1 = wlan1 ] + then + IS_WIRELESS=TRUE + TEMPNET=HostESSID$1 + eval ESSID=\$${TEMPNET} + + TEMPNET="HostKey"$1 + eval KEY=\$${TEMPNET} + + TEMPNET=HostUseEncryption$1 + eval ENCRYPT=\$${TEMPNET} + fi + + + echo "Setup $1 in progress, wireless: $IS_WIRELESS" + + if [ ! -d $ETCNETDIR/$1 ] + then + mkdir -p $ETCNETDIR/$1 + fi + + if [ ! -f $ETCNETDIR/$1/options ] + then + cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options + fi + + if [ x$isactive = x0 ] + then + echo "setting $1 to inactive" + sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options + + else + echo "setting $1 to active" + sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options + fi + + if [ x$IS_WIRELESS = xTRUE ] + then + echo "setting $1 wireless" + sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options + #set the key and essid + echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig + if [ x$ENCRYPT = x1 ] + then + echo "key $KEY" >> $ETCNETDIR/$1/iwconfig + fi + + else + echo "disabling wireless" + sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options + fi + + + + + if [ $UseDHCP = 0 ] + then + echo using dhcp + sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options + + else + echo "using static ip" + sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options + echo "default via $GW" > $ETCNETDIR/$1/ipv4route + echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address + setup_nameserver $dns + fi +} + + +function find_active () { +#HostActiveeth1="1" +rm -f ${BASE}/etc/resolv.conf +if [ x$MYTHDHCP = x1 ] + then + #add 127.0.0.1 to /etc/resolv.conf + echo "search lan" > ${BASE}/etc/resolv.conf + echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf + fi + +for i in eth0 eth1 wlan0 wlan1 +do + CURRENTIF="HostActive"$i + eval IFSTATE=\$${CURRENTIF} + if [ x$IFSTATE = x1 ] + then + setup_interfaces $i + fi +done +} + +function setup_hostname { +#set the hostname +if [ ! x$hostname = x ] +then + echo $hostname > ${BASE}/etc/hostname + cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts + #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts + + if [ x$MYTHDHCP = x1 ] + then + echo "127.0.0.1 localhost " > ${BASE}/etc/hosts + echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts + else + echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts + fi + cat /tmp/hosts >> ${BASE}/etc/hosts +fi + +kill_dhcp +} + +function vnc_check() { + CMDLINE=$(cat /proc/cmdline) + echo $CMDLINE |grep -q vnc + USEVNC=$? + echo $CMDLINE |grep -q nfsroot + NETBOOT=$? + echo $USEVNC + if [ ! x$USEVNC = x0 ] + then + echo "not using vnc" + if [ ! x$NETBOOT = x0 ] + then + echo "not using netboot" + else + echo "using netboot" + USEVNC=0 + fi + + else + echo " using vnc" + fi +} + +function setup_MYTH_vars { + TEMPMYTH="Hostip"$default_interface + #echo $TEMPMYTH + eval MYTHIP=\$${TEMPMYTH} + + TEMPMYTH="HostUSEDHCP"$default_interface + eval MYTHDHCP=\$${TEMPMYTH} + + + +} + + + +function setup_network { + setup_MYTH_vars + setup_hostname + find_active +} + +function start_network { +if [ ! $USEVNC = 0 ] +then + /etc/net/scripts/network.init restart + +else + echo "VNC/NETBOOT in use, will NOT restart network" +fi + +} + +function stop_network { +if [ ! $USEVNC = 0 ] +then + echo "stopping the network" + kill_dhcp flush + ip address flush dev eth0 2>&1 >/dev/null + ip address flush dev eth1 2>&1 >/dev/null + ip address flush dev wlan0 2>&1 >/dev/null + ip address flush dev wlan1 2>&1 >/dev/null +else + echo "VNC/NETBOOT in use, will NOT restart network" +fi + +} + + +#this is used by the install process to start the network +function install_network_setup { + setup_MYTH_vars + setup_hostname + stop_network + find_active + start_network + +} + + + + + + + diff --git a/abs/core-testing/LinHES-config/remove_service.sh b/abs/core-testing/LinHES-config/remove_service.sh new file mode 100755 index 0000000..6cc4b4f --- /dev/null +++ b/abs/core-testing/LinHES-config/remove_service.sh @@ -0,0 +1,8 @@ +#!/bin/bash +SERVICE_DIR=/var/service +SCRIPT_DIR=/etc/sv +if [ -e $SERVICE_DIR/$1 ] +then + echo "removing" + rm $SERVICE_DIR/$1 +fi diff --git a/abs/core-testing/LinHES-config/restore_default_settings.sh b/abs/core-testing/LinHES-config/restore_default_settings.sh new file mode 100755 index 0000000..5690f48 --- /dev/null +++ b/abs/core-testing/LinHES-config/restore_default_settings.sh @@ -0,0 +1,349 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +shopt -s -o nounset +echo $@ >> /tmp/restore.out +#TEMPLATES="/usr/share/templates/settings" +TEMPLATES="$TEMPLATES/settings" +TABLES="settings keybindings" +MYTHDBUSER=mythtv +MYTHTVPASSWD=mythtv +declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho" +Thistemplate="" +declare -i OVERRIDE=0 +declare -i EVERYTHING=0 + +function CMD_DEFINE () { + #add override check + if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ] + then + MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" + MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" + MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";" + else + MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" + MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" + MYSQLCMD_UPDATE_HOST="select hostname from settings;" + fi +} + +function SQL_DEFINE () { + #$1 is the table name + if [ $1 = "settings" ] + then + ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )" + else + ALTERSQL=";" + fi + + CREATESQL="create table temp_${1}_${hostname} like $1;" + COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");" + INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" + #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" + DROPSQL="delete from $1 where hostname=\"$hostname\";" + COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");" + DROP_TABLE="Drop table temp_${1}_${hostname}" +} + +function ARG_ERR() { + if [ x$OPTARG = "x" ] + then + echo "$SWITCH NEEDS AND ARG" + exit 11 + fi +} + +function ALSADEVICE () { +#ALSA:hw:1,4 + if [ x$Audiotype = xALSA ] + then + SoundDevice=ALSA:$SoundDevice + fi +} + + + +if [ $# -eq 0 ] +then + echo "Valid options are:" + echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)" + echo " -t (syssettings|hostsettings)" + echo " -d databasename" + echo " -h hostname" + echo " -s systemtype (master|slave|standalone|frontendonly)" + echo " -a ipaddress" + echo " -z zipcode" + echo " -o override (only used upgrade installs)" + exit 1 +fi + + + + +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + # \?) echo "unkown option" + # exit 11 ;; + c) echo "$SWITCH" "$OPTARG" + ARG_ERR + OPERATION=$OPTARG + ;; + t) echo "$SWITCH" "$OPTARG" + ARG_ERR + Thistemplate=$OPTARG + + if [ x$Thistemplate = x"syssettings" ] + then + echo "template is syssettings" + loadhost=false + elif [ x$Thistemplate = x"hostsettings" ] + then + echo "template is hostsettings" + Thistemplate=syssettings + loadhost=true + else + echo "invalid template name" + exit 1 + fi + ;; + d) echo "$SWITCH" "$OPTARG" + ARG_ERR + if [ $OVERRIDE = 1 ] + then + ovdbhost=$OPTARG + else + dbhost=$OPTARG + fi + ;; + h) echo "$SWITCH" "$OPTARG" + ARG_ERR + if [ $OVERRIDE = 1 ] + then + oldhostname=$hostname + hostname=$OPTARG + else + hostname=$OPTARG + fi + + ;; + s) echo "$SWITCH" "$OPTARG" + ARG_ERR + SYSTEMTYPE=$OPTARG + ;; + a) echo "$SWITCH" "$OPTARG" + ARG_ERR + IP_ADDRESS=$OPTARG + ;; + z) echo "$SWITCH" "$OPTARG" + ARG_ERR + ZIPCODE=$OPTARG + ;; + o) OVERRIDE=1 + ;; + + esac +done + +echo $OVERRIDE + +#setup the Mysql commands +CMD_DEFINE + +$MYSQLCMD_C "show tables" > /dev/null +status=$? +if [ $status = 1 ] +then + echo "$@ failed" + echo "$@ failed" >> /tmp/restore.out + exit 1 +fi + + + + + + + +case $OPERATION in + + restore) + #used to restore settings from syssettings + if [ -d $TEMPLATES/$Thistemplate ] + then + cd $TEMPLATES/$Thistemplate + if [ $loadhost = false ] + then + for i in $TABLES + do + SQL_DEFINE $i + sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt + #echo $MYSQLCMD "$SELECTSQL" + echo $i + $MYSQLCMD "$CREATESQL" + $MYSQLCMD "$ALTERSQL" + $MYSQLCMD "$COPY_TMP_SQL" + $MYSQLCMD "$INSERTSQL" + $MYSQLCMD "$DROPSQL" + $MYSQLCMD "$COPY_BCK_SQL " + $MYSQLCMD "$DROP_TABLE " + #rm /tmp/$i.txt + done + fi + if [ $loadhost = true ] + then + #only load the settings table with values HOST + i=settings + SQL_DEFINE $i + sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt + echo $i + $MYSQLCMD "$CREATESQL" + $MYSQLCMD "$ALTERSQL" + $MYSQLCMD "$INSERTSQL" + $MYSQLCMD "$COPY_TMP_SQL" + $MYSQLCMD "$DROPSQL" + $MYSQLCMD "$COPY_BCK_SQL" + $MYSQLCMD "$DROP_TABLE " + fi + else + echo "couldn't find $TEMPLATES/$Thistemplate" + fi + ;; + + save) + + if [ ! -d $TEMPLATES/$Thistemplate ] + then + mkdir -p $TEMPLATES/$Thistemplate + fi + + cd $TEMPLATES/$Thistemplate + for i in $TABLES + do + EXTRACLAUSE="" + case $i in + settings) + EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value" + SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt + ;; + keybindings) + SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" + $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt + ;; + esac + # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i + + done + ;; + + load) + + #will load both default_1 and default_2 unless either file is not found + for i in default_1 default_2 + do + if [ -f $TEMPLATES/$i/settings.txt ] + then + echo $i + for tablename in $TABLES + do + #create table + CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;" + $MYSQLCMD_C "$CREATESQL" + #truncate table + TRUNCATESQL="truncate ${tablename}_${i} " + $MYSQLCMD_C "$TRUNCATESQL" + #load table + INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';" + $MYSQLCMD_C "$INSERTSQL" + #update_hostname + UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; " + $MYSQLCMD_C "$UPDATEHOSTNAMESQL" + done + else + + echo "couldn't find $TEMPLATES/$i/settings.txt template to load" + fi + CREATESQL="create table IF NOT EXISTS settings_user1 like settings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS settings_user2 like settings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS settings_user3 like settings;" + $MYSQLCMD_C "$CREATESQL" + + CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;" + $MYSQLCMD_C "$CREATESQL" + done +;; + + + + BECONFIG) + if [ $SYSTEMTYPE = "master" ] + then + $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';" + $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" + fi + + if [ $SYSTEMTYPE = "slave" ] + then + $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" + fi + ;; + ZIP) + $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";" + $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";" + ;; + MUSICFRONT) + ALSADEVICE + $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";" + #need to reload the settings. + systemconfig.sh reloadfe + ;; + MUSICMYTH) + ALSADEVICE + $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";" + ;; + uhostname) + #used when the hostname is changed. + TABLES="settings capturecard keybindings storagegroup recorded" + for i in $TABLES + do + USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;" + $MYSQLCMD_C "$USQL" + done + + ;; + USERJOBALLOW) + SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;" + $MYSQLCMD_C "$SQL" + ;; + + ACCESSCONTROL) + LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound" + + for i in $LIST + do + $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";" + $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";" + done + SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;" + $MYSQLCMD_C "$SQL" + esac + +#SELECT * INTO OUTFILE 'data.txt' +# FIELDS TERMINATED BY ',' +# FROM table2; + + diff --git a/abs/core-testing/LinHES-config/restore_km_db_chroot.sh b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh new file mode 100644 index 0000000..9467ffd --- /dev/null +++ b/abs/core-testing/LinHES-config/restore_km_db_chroot.sh @@ -0,0 +1,53 @@ +#!/bin/bash +. /etc/profile +. /etc/systemconfig +set -x +#myhost=`cat /etc/hostname` +myhost=$hostname +hostname $myhost +mount -t proc none /proc +DBFILE=$1 + +if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] + then + #restore database + pacman --noconfirm -Sf mysql + status=1 + mysqlstatus=1 + while [ ! $status = 0 ] + do + /etc/rc.d/mysqld stop + sleep 1 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql -e "show databases;" + showstatus=$? + if [ $showstatus = 0 ] + then + #load database + pacman --noconfirm -R mythdb-initial + pacman --noconfirm -S mythdb-initial + echo "restoring old database" + gunzip -c /myth/backup/mythconverg.sql.gz > /myth/backup/mythconverg.sql + mysql mythconverg < /myth/backup/mythconverg.sql + + + if [ -d /var/lib/mysql/mythconverg ] + then + status=0 + fi + fi + fi + done + rm -f /myth/backup/mythconverg.sql + else + exit 0 + fi + +#/etc/rc.d/mysqld stop +#umount /proc + + + diff --git a/abs/core-testing/LinHES-config/soundconfig.sh b/abs/core-testing/LinHES-config/soundconfig.sh new file mode 100755 index 0000000..1adb447 --- /dev/null +++ b/abs/core-testing/LinHES-config/soundconfig.sh @@ -0,0 +1,248 @@ +#!/bin/bash +. /etc/systemconfig +. /etc/profile +echo $@ >/tmp/audio.call +#set -x +BASE="" +. /etc/profile +#TEMPLATES="/usr/share/templates" +TESTFILE="$TEMPLATES/audio/space_battle_A.wav" +OSSinstalled="false" + +function testaudio () { + +ossplay -d$AUDIODEVICE $TESTFILE + +} + +function load_alsa() { + + remove_service.sh alsa-utils +# cd /lib/modules/2.6.21-STB + KER=`uname -r` + cd /lib/modules/$KER/kernel/ + tar -xvf alsa-$KER.tar + pacman -Sf --noconfirm alsa-lib + + depmod -a + cd - + udevsettle + udevsettle + udevtrigger + + add_service.sh alsa-utils + sleep 4 + sv start alsa-utils +} + + +function unload_alsa () { +#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}') + sv stop alsa-utils + remove_service.sh alsa-utils + rm -rf /dev/adsp* + rm -rf /dev/snd/* + rm -rf /dev/audio + modprobe -r $(lsmod |grep ^snd |awk '{print $1}') +} + +function unload_oss { + sv stop oss + soundoff + rm -rf /dev/dsp* + rm -rf /dev/oss* + rm -rf /dev/sndstat + remove_service.sh oss +} + +function installOSS { + echo "installing oss" + add_service.sh oss + sleep 4 + sv start oss +} + + +function SYNCXINE { +echo "modify xine config file" + if [ -f /data/home/mythtv/.xine/config ] + then + cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config + else + cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config + fi + + if [ x$Audiotype = xOSS ] + then + DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp ` + sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \ + -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \ + -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \ + -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \ + $TEMPLATES/xine.config > /data/home/mythtv/.xine/config + else + cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config + fi + +} + +function SYNCMPLAYER { +echo "modify mplayer not implmented yet" +} + +function SYNCMYTHMUSIC { +echo "sync mythmusic" +$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH +} + +function SYNCMYTHFRONTEND { +echo "sync mythfrontend" +$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT +} + + +function checkOSSinstalled () { + ossinfo 1>/dev/null + resultcode=$? + echo $resultcode + if [ $resultcode = 0 ] + then + OSSinstalled='true' + else + OSSinstalled='false' + fi +} + +function sound_config_system { + + if [ x$syncXine = x1 ] + then + SYNCXINE + fi + if [ x$syncMplayer = x1 ] + then + SYNCMPLAYER + fi + if [ x$syncMythMusic = x1 ] + then + SYNCMYTHMUSIC + fi + if [ x$syncMythFrontend = x1 ] + then + SYNCMYTHFRONTEND + fi + +} + +function loadsound (){ + checkOSSinstalled + if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] + #then + # if [ $OSSinstalled = "false" ] + then + while [ $OSSinstalled = "false" ] + do + unload_alsa + rm /tmp/.alsatest + installOSS + installOSS + sleep 2 + checkOSSinstalled + done + # fi + else + touch /tmp/.alsatest + unload_oss + load_alsa + load_alsa + rm /tmp/.alsatest + + fi + +} + + + + +#####################MAIN PROGRAM########################## + +declare -r OPTSTRING="i:t:d:" + +if [ $# -eq 0 ] +then + echo "Valid options are:" + echo " -i (oss|alsa) oss or alsa subsystem " + echo " -t (test|real|LOAD) " + echo " -d device" + exit 1 +fi + + + + +while getopts "$OPTSTRING" SWITCH +do + case $SWITCH in + \?) echo "unkown option" + exit 11 ;; + i) echo "$SWITCH" "$OPTARG" + AUDIOTYPE="$OPTARG" + ;; + d) echo "$SWITCH" "$OPTARG" + AUDIODEVICE=$OPTARG + ;; + t) echo "$SWITCH" "$OPTARG" + SOUNDOPTYPE="$OPTARG" + if [ x"$OPTARG" = xtest ] + then + TEST=true + else + TEST=false + fi + + + ;; + + esac +done + + + + +case $SOUNDOPTYPE in + REAL|real ) + loadsound + sound_config_system + ;; + test|TEST) + echo $@ > /tmp/audio.test + #loadsound + if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] + then + echo "testing OSS $AUDIODEVICE " + ossplay -d$AUDIODEVICE $TESTFILE + else + echo "testing ALSA $AUDIODEVICE " + aplay --device=$AUDIODEVICE $TESTFILE + fi + + ;; + + LOAD|load) + loadsound + ;; + esac + + +exit 0 + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/startx b/abs/core-testing/LinHES-config/startx new file mode 100755 index 0000000..0ffdf8c --- /dev/null +++ b/abs/core-testing/LinHES-config/startx @@ -0,0 +1,29 @@ +#!/bin/bash +. /etc/profile + +export USER=root +export HOME=/root +#TEMPLATES=/usr/share/templates + +CMDLINE=$(cat /proc/cmdline) +TEMPVAR=${CMDLINE#*ip=} +IP=${TEMPVAR%% *} +echo $CMDLINE |grep -q vnc +USEVNC=$? + +if [ x$USEVNC = x1 ] +then + $MV_ROOT/bin/xconfig.sh + cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install + startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail + else + #VNC + pacman -Sf --noconfirm tightvnc + cd /root + mkdir .vnc + echo mythvantage |vncpasswd -f > /root/.vnc/passwd + chmod 500 /root/.vnc/passwd + rm /root/.vnc/xstartup + ln -s /root/live-install.sh /root/.vnc/xstartup + vncserver +fi diff --git a/abs/core-testing/LinHES-config/systemconfig.sh b/abs/core-testing/LinHES-config/systemconfig.sh new file mode 100755 index 0000000..845c67c --- /dev/null +++ b/abs/core-testing/LinHES-config/systemconfig.sh @@ -0,0 +1,1255 @@ +#!/bin/bash +################################################################### +#Script to configure your system based off the values in /etc/systemconfig +#Any changes made to config files will be removed when systemconfig.sh is run +# +#JM +################################################################### +#set -x +. /etc/profile +#MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2` +MVRELEASE=`cat /etc/LinHES-release ` +echo $@ >/tmp/systemconfig.call +echo "----------------------start of systemconfig $@ ----------------------" +BASE="" + +#TEMPLATES="/usr/share/templates" +. /etc/profile +. $MV_ROOT/bin/networkconfig.sh +PACMAN="pacman --noconfirm" +postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype` +PKGBLACKLIST=$BASE/etc/blacklist.package + +if [ x$1 = x"Mysql_only" ] + then + rm -f /tmp/mysql.txt + sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt + exit 0 + fi + + +if [ -f /etc/systemconfig ] +then + . /etc/systemconfig +TEMPNET="Hostip"$default_interface +echo $TEMPNET +eval MYTHIP=\$${TEMPNET} +else + echo "could not find /etc/systemconfig" + exit 1 +fi + + + +#----------------------------------------------------- + + +function setupmysql { +#setup mysql.txt to find the database servers + if [ $SystemType = "Master_backend" ] + then + if [ $MYTHDHCP = 0 ] + then + #this grabs eth0, as that is all thats supported. +# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old + cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + ##logic to change master_serverip and backend_serverip in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + else + + dbhost=$MYTHIP + sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old + cp /tmp/systemconfig.old ${BASE}/etc/systemconfig + #logic to change dbhost in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost + fi + fi + + if [ $SystemType = "Slave_backend" ] + then + if [ $MYTHDHCP = 0 ] + then + #this grabs eth0, as that is all thats supported. + #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` + slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` + ##logic to change backend_serverip in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost + else + slavehost=$MYTHIP + + #logic to change backend_serverif in db + ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost + fi + fi + + MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt + if [ $SystemType = "Standalone" ] + then + sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT + else + sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT + fi + rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt + rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt + if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ] + then + cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT + fi + + chmod 755 $MYSQLTXT + chown mythtv $MYSQLTXT + +} + +function setupmysqlnetwork(){ +MFILE=etc/my.cnf +grep "#skip-networking" $BASE/$MFILE +status=$? + + + + if [ $SystemType = "Standalone" ] + then + sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE + if [ $status = 0 ] + then + sudo sv restart mysql + echo "restarting mysql with no network" + fi + + fi + + if [ $SystemType = "Master_backend" ] + then + sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE + if [ $status = 1 ] + then + sudo sv restart mysql + echo "restarting mysql with network" + fi + + fi + + +} + + +function settimezone { +#set the timezone +if [ x"$timezone" = x ] +then + timezone="unknown" +fi +rm ${BASE}/etc/localtime +echo $timezone +ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime + sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf + + # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock + # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock + # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock +cp $TEMPLATES/rc.conf /etc/rc.conf + +} + + +function setupreceiver { + case $ReceiverType in + tinker) echo "do nothing" + ;; + Serial) echo "setup serial lirc" + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage + /usr/bin/load-modules-mythvantage.sh + ;; + Usb-imon) echo "setup receiver-usb-imon" + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage + /usr/bin/load-modules-mythvantage.sh + ;; + *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + ;; + esac + + +} + +function setupremote { + case $Remotetype in + no_remote) echo "No remote selected" + daemon_remove="lircd $daemon_remove" + ;; + tinker) echo "Remote in tinker mode" + ;; + *) echo "Setup remote" + mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` + cd $TEMPLATES/remotes/$Remotetype + for i in lircd* + do + cat $i >> ${BASE}/etc/lircd.conf + done + cp lircrc ${BASE}/etc/lircrc + if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] + then + cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc + cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf + fi + if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ] + then + cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf + fi + chmod 755 /etc/lircrc + daemon_add="lircd $daemon_add" + sv hup lircd + ;; +esac + +} + +function setupblaster { + #cd $TEMPLATES/transmit/$Blastertype + #for i in lircd* + #do + # cat lircd.conf >> ${BASE}/etc/lircd.conf + #done + # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` + sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh + chmod 755 ${BASE}/usr/bin/change_chan.sh + #channel change script change + setupremote + +} + +function setupevrouter { + if [ x$UseEvrouter = x1 ] + then + case x$EvrouterConfig in + xtinker ) + echo "do nothing for evrouter" + ;; + x ) echo "empty evrouter" + ;; + * ) echo "setup evrouter for $EvrouterConfig " + cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg + daemon_add="evrouter Xvfb $daemon_remove" + + ;; + esac + else + # disable evrouter + daemon_remove="evrouter Xvfb $daemon_remove" + fi + + + + +} + +function setupLCD { + case x$LCDtype in + xtinker) echo "do nothing" + ;; + xno_lcd) echo "disabling lcd" + sv down lcdd + /usr/bin/load-modules-mythvantage.sh UNLOAD LCD + sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage + daemon_remove="lcdd $daemon_remove" + ;; + x) echo "empty lcd" ;; + + *) echo "setup lcd" + if [ -f $TEMPLATES/LCD/$LCDtype/modules ] + then + sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage + cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage + #should also modprobe + fi + + + if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] + then + cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc + # install="lcdproc $install" + daemon_add="lcdd $daemon_add" + /usr/bin/load-modules-mythvantage.sh + RESTART_FE="true" + RESTART_LCD="true" + fi + #check if lirc capable,if so then call setupremote + if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] + then + setupremote + fi + ;; + esac + +} + + + +function scrubnfs { + cp /etc/fstab $TEMPLATES/fstab.conf.template + grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab + } + +function setupfstab () { +# setupfstab $NFSserver $NFSshare $NFSmount + echo "$1 $2 nfs" >> ${BASE}/etc/fstab + if [ ! -e "$2" ] + then + mkdir -p "$2" + chown mythtv:mythtv "$2" + fi + if [ x$DCONFIG = x ] + then + mount $2 & + fi + +} + +function setupncidclient +{ + sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf +} + +function setupnciddaemon { + cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template + sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf + +} + +function setupntp () { +cat > ${BASE}/etc/ntp.conf << EOF +# default restrictions +restrict default noquery notrust nomodify +# NTP drift file - used to keep track of your system clocks +# time deviation +driftfile /etc/ntp.drift + +# NTP log file +logfile /var/log/ntp.log +# override the default restrictions here, servers that can query +restrict 192.168.0.0 mask 255.255.0.0 nomodify +restrict 10.0.0.0 mask 255.0.00 nomodify + +#servers to sync with +EOF + #this is used for backend or standlone types + if [ $1 = "1" ] + then + echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf + echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf + echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf + echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf + + else + echo "server $dbhost" >> ${BASE}/etc/ntp.conf + echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf + fi + + +} + +function setupplugins (){ + +pkglistinstall="" +pkglistremove="" +#default enabled +for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo +do +eval pkgvalue=\$${i} + +if [ x$pkgvalue = x ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + if [ x$pkgvalue = x1 ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + pkglistremove="$pkglistremove $i$postfix" + fi + fi + + + +done + + + +#default disabled + for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather + do +eval pkgvalue=\$${i} + +if [ x$pkgvalue = x ] + then + pkglistremove="$pkglistremove $i$postfix" + else + if [ x$pkgvalue = x1 ] + then + pkglistinstall="$pkglistinstall $i$postfix" + else + pkglistremove="$pkglistremove $i$postfix" + fi + fi + done +install="$pkglistinstall $install" +remove="$pkglistremove $remove" + +} +function LCDcheck () { + case x$LCDtype in + xtinker) echo "do nothing lcd " + ;; + xno_lcd) echo "no lcd " + ;; + xxosd) install="xosd lcdproc $install" + ;; + x) echo "lcd empty " + ;; + *) + install="lcdproc $install" + ;; +esac +} + + +function packages () { +#see which plugins need to be installed +echo " Starting to install Packages" +setupplugins +LCDcheck +if [ ! -f $PKGBLACKLIST ] +then + touch $PKGBLACKLIST +fi + for i in $remove + do + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` + if [ $? = 0 ] + then + if [ $i = "mythweb$postfix" ] + then + pacman --noconfirm -R mythweb$postfix + echo removed $i + else + pacman --noconfirm -Rs $i + echo removed $i + fi + fi + else + echo "$i is black listed" + fi + done + # fi + + for i in $install + do + echo "-----------$i --------------" + grep -q $i $PKGBLACKLIST + if [ $? = 1 ] + then + pacman -Q $i 2>/dev/null + #VAR=`pacman -Q $i 2>&1 ` + # echo $VAR |grep -vq error: + + if [ ! $? = 0 ] + then + pacman --noconfirm -Sf $i + echo installed $i + else + echo "$i already installed" + fi + else + echo "$i is black listed" + fi + done +} + +function daemons { +echo "Daemons on boot" + + for i in $daemon_remove + do + sv check $i 1>/dev/null + status=$? + if [ $status -eq 0 ] + then + sv down $i + fi + remove_service.sh $i + done + + + for i in $daemon_add + do + sv check $i 1>/dev/null + status=$? + add_service.sh $i + + if [ $status -eq 0 ] + then + case $i in + mysql*) sv hup $i + ;; + mythback*) sv hup $i + ;; + lirc* ) sv hup $i + ;; + frontend) sv check frontend 1>/dev/null + ;; + + smbd ) sv hup $i + ;; + nmbd ) sv hup $i + ;; + evrouter) sv restart $i + ;; + *) sv down $i + sleep 1 + sv up $i + ;; + esac + fi + + done + +} + + +function services +{ +ser_install="" +ser_daemon_add="" +ser_remove="" +ser_daemon_remove="" +if [ x$UseEvrouter = x1 ] +then + ser_daemon_add="evrouter Xvfb $ser_daemon_add" +else + ser_daemon_remove="evrouter Xvfb $ser_remove" +fi + +if [ x$RunDHCP = x1 ] +then + ser_daemon_add="dnsmasq $ser_daemon_add" + ser_install="dnsmasq mvpmc $ser_install" + +else + ser_daemon_remove="dnsmasq $ser_daemon_remove" + ser_remove="dnsmasq mvpmc $ser_remove" +fi + +if [ x$RunFrontend = x1 ] +then + ser_daemon_add="frontend hal $ser_daemon_add" + ser_install=" $ser_install" + showX=true + else + ser_daemon_remove="frontend hal $ser_daemon_remove" + ser_remove="$ser_remove" + fi + +if [ x$UseMythWEB = x1 ] +then + ser_install="lighttpd mythweb$postfix $ser_install" + ser_daemon_add="lighttpd $ser_daemon_add" + else + ser_remove="mythweb$postfix $ser_remove" + ser_daemon_remove="$ser_daemon_remove" + fi + +#samba +if [ x$UseSamba = x1 ] +then + ser_install="samba $ser_install" + ser_daemon_add="nmbd smbd $ser_daemon_add " + if [ x$Samba_mediareadonly = x1 ] + then + smreadonly="no" + else + smreadonly="yes" + fi + + if [ x$Samba_homereadonly = x1 ] + then + shreadonly="no" + else + shreadonly="yes" + fi + + if [ ! -d ${BASE}/etc/samba ] + then + mkdir ${BASE}/etc/samba + fi + + if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ] + then + install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf + else + sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \ + -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf + + if [ x$Samba_media = "x1" ] + then + echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf + sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media + fi + + if [ x$Samba_home = "x1" ] + then + echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf + sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home + + fi + + fi +else + ser_remove="samba $ser_remove" + ser_install="smbclient $ser_install" + ser_daemon_remove="smbd nmbd $ser_daemon_remove" +fi + + +if [ x$UseNFS = x1 ] +then + ser_install="nfs-utils portmap $ser_install" + ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" + sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports + +else + ser_remove="$ser_remove" + ser_daemon_remove="nfsd nfslock $ser_daemon_remove" +fi + +if [ x$Runncidd = x1 ] +then + ser_daemon_add="ncidd ncid $ser_daemon_add" + ser_install="ncid $ser_install" + else + ser_daemon_remove="ncidd ncid $ser_daemon_remove" + ser_remove="ncid $ser_remove" + fi + +#Setting the default, just to avoid the or statement.. +if [ x$UseHobbit = x ] +then + UseHobbit=0 +fi + +if [ x$UseHobbit = x1 ] +then + case $SystemType in + Standalone|Master_backend ) + ser_daemon_add="hobbit $ser_daemon_add" + ser_install="hobbitserver $ser_install" + ;; + + *) ser_daemon_add="hobbit-client $ser_daemon_add" + ser_install="hobbit-client $ser_install" + ;; + esac +else + ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove" + ser_remove="hobbit-client hobbitserver $ser_remove" + rm -f /data/srv/httpd/htdocs/hobbit/index.html + + fi + + + +} + + + +function setupsleep { +if [ x$AutoShutdown = x1 ] +then + cronshutdowntime="" + if [ x$Shutdowntime != x-1 ] + then + cronshutdowntime=$Shutdowntime + fi + if [ x$Shutdowntime2 != x-1 ] + then + if [ x$cronshutdowntime = x ] + then + cronshutdowntime=$Shutdowntime2 + else + cronshutdowntime="${cronshutdowntime},${Shutdowntime2}" + fi + fi + + sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv +else + sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv +fi + +} + + +function setuppacman () { +#setup link to httpd dir +echo "Configuring pacman" + if [ ! x$1 = x ] + then + ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo + echo "creating the link for the pacman repo mirror" + fi + + for i in mv-core mv-core-testing mv-extra mv-extra-testing + do + echo "[$i]" > ${BASE}/etc/pacman.d/$i + #add mirror if needed + if [ x$PKG_MIRROR = x1 ] + then + echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i + fi + #add user templates + USERTEMPLATES="/data/home/mythtv/templates" + if [ -f $USERTEMPLATES/sources/$i ] + then + echo "Adding user $i" + cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i + fi + cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i + echo "setting local mirror to $dbhost for $i " + done + + #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg + + +} + + +function setupzipcode () { + if [ ! x$zipcode = x ] + then + ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode + fi +} + +function process_nfsmap () { +#first look for a local copy of nfsmap +if [ $1 = noip ] +then + if [ -f /data/home/mythtv/templates/nfsmap ] + then + NFSMAP="/data/home/mythtv/templates/nfsmap" + else + mv -f /tmp/nfsmap /tmp/nfsmap.old + wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap + if [ $? = 0 ] + then + NFSMAP="/tmp/nfsmap" + fi + fi +else + mv -f /tmp/nfsmap /tmp/nfsmap.old + wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap + if [ $? = 0 ] + then + NFSMAP="/tmp/nfsmap" + fi +fi + + if [ -f $NFSMAP ] + then + #read in file + while read line + do + NFSserver=`echo "$line"|cut -d" " -f1` + NFSmount=`echo "$line"|cut -d" " -f2` + setupfstab $NFSserver $NFSmount + done <$NFSMAP + else + echo "couldn't find nfsmap" + + fi +} + +function setupcnfs () { + scrubnfs + if [ $HaveCentralNFS = "yes" ] + then + case x$NFSserver in + xfile:nfsmap ) + process_nfsmap noip + ;; + *:nfsmap ) + nfsmapip=`echo "$NFSserver" | cut -d: -f1 ` + process_nfsmap $nfsmapip + ;; + *) setupfstab $NFSserver $NFSmount + esac + + #if [ ! x"$NFSserver" = "xfile:nfsmap" ] + #then + # setupfstab $NFSserver $NFSmount + #else + # process_nfsmap + #fi + else + echo "fe_nfs" + #if no central nfs found, then use the mbe. + if [ $SystemType = "Frontend_only" ] + then + setupfstab ${dbhost}:/data/media /data/media + fi + fi + +} + +function setupbootsplash () { + +if [ x$Usebootsplash = x1 ] +then + COMMAND="%s/^default.*0/default 1/g" +else + COMMAND="%s/^default.*1/default 0/g" +fi + +ex ${BASE}/boot/grub/menu.lst < ${BASE}/etc/resolv.conf + echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf + echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf +fi + +#setup dongle.config +COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /" +ex ${BASE}/data/srv/tftp/dongle.bin.config < /etc/os_myth_release +echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info +echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info + diff --git a/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf new file mode 100644 index 0000000..d49fbf6 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Shuttle-SG33/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=shuttleVFD +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf new file mode 100644 index 0000000..2596c25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=imon +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules new file mode 100644 index 0000000..cd576c3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/Silverstone/modules @@ -0,0 +1 @@ +lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf new file mode 100644 index 0000000..2596c25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/LCDd.conf @@ -0,0 +1,869 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, +# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, +# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, +# sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=imon +#Driver=curses + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +#ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 +# Set the initial off-brightness [default: 0; legal: 0 - 255] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +# NOTE: The driver will ignore this if the display is a vfd or vkd +# as they crash if the backlight is turned off +Backlight=yes + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=800 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# The following table translates from MtxOrb key letters to logical key namess. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) +# Note: G321D is the only one that is tested currently. +Type=G321D + + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use +Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf new file mode 100644 index 0000000..ce64936 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircd.conf @@ -0,0 +1,38 @@ + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007 +# +# contributed by +# +# brand: /tmp/out +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name Antec_fusion_silver_v1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + post_data_bits 16 + post_data 0xFF + gap 131985 + min_repeat 6 + toggle_bit 0 + + + begin codes + CW 0x0001 + CCW 0x0100 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc new file mode 100644 index 0000000..7a39704 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/lircrc @@ -0,0 +1,15 @@ +begin + remote = Antec_fusion_silver_v1 + prog = mythtv + button = CW + repeat = 1 + config = ] +end + +begin + remote = Antec_fusion_silver_v1 + prog = mythtv + button = CCW + repeat = 1 + config = [ +end diff --git a/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules new file mode 100644 index 0000000..cd576c3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/antec_fusion/modules @@ -0,0 +1 @@ +lirc_imon #LCD diff --git a/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf new file mode 100644 index 0000000..5b37bd7 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/LCD/xosd/LCDd.conf @@ -0,0 +1,957 @@ +# LCDd.conf -- configuration file for the LCDproc server daemon LCDd +# +# This file contains the configuration for the LCDd server. +# +# The format is ini-file-like. It is divided into sections that start at +# markers that look like [section]. Comments are all line-based comments, +# and are lines that start with '#' or ';'. +# +# The server has a 'central' section named [server]. For the menu there is +# a section called [menu]. Further each driver has a section which +# defines how the driver acts. +# +# The drivers are activated by specifiying them in a driver= line in the +# server section, like: +# +# Driver=curses +# +# This tells LCDd to use the curses driver. +# The first driver that is loaded and is capable of output defines the +# size of the display. The default driver to use is curses. +# If the driver is specified using the -d command line option, +# the Driver= options in the config file are ignored. +# +# The drivers read their own options from the respective sections. + + + +## Server section with all kinds of settings for the LCDd server ## +[server] + +# Tells the server to load the given drivers. Multiple lines can be given. +# The name of the driver is case sensitive and determines the section +# where to look for further configuration options of the specific driver +# as well as the name of the dynamic driver module to load at runtime. +# The latter one can be changed by giving af File= directive in the +# driver specific section. +# +# The following drivers are supported: +# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, +# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, +# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x, +# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS, +# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd +Driver=xosd + +# Tells the driver to bind to the given interface +Bind=127.0.0.1 + +# Listen on this specified port; defaults to 13666. +Port=13666 + +# Sets the reporting level; defaults to 2 (warnings and errors only). +ReportLevel=3 + +# Should we report to syslog instead of stderr ? Default: no +#ReportToSyslog=yes + +# Sets the default time in seconds to displays a screen. +WaitTime=5 + +# User to run as. LCDd will drop its root priviledges, +# if any, and run as this user instead. +User=nobody + +# If yes, the the serverscreen will be rotated as a usual info screen. If no, +# it will be a background screen, only visible when no other screens are +# active. +#ServerScreen=no + +# The server will stay in the foreground if set to true. +#Foreground=no + +# Where can we find the driver modules ? +# IMPORTANT: Make sure to change this setting to reflect your +# specific setup! Otherwise LCDd won't be able to find +# the driver modules and will thus not be able to +# function properly. +# NOTE: Always place a slash as last character ! +DriverPath=/usr/lib/lcdproc/ + +# GoodBye message: each entry represents a display line; default: builtin +#GoodBye="Thanks for using" +#GoodBye=" LCDproc!" + +# The "...Key=" lines define what the server does with keypresses that +# don't go to any client. +# These are the defaults: +ToggleRotateKey=Enter +PrevScreenKey=Left +NextScreenKey=Right +#ScrollUpKey=Up +#ScrollDownKey=Down + +# If you have only 4 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up +#NextScreenKey=Down + +# If you have only 3 keys, you can choose to use this: +#ToggleRotateKey=Enter +#PrevScreenKey=Up + + + +## The menu section. The menu is an internal LCDproc client. ## +[menu] +# You can configure what keys the menu should use. Note that the MenuKey +# will be reserved exclusively, the others work in shared mode. + +# The following works excellent with 4 keys or more. +MenuKey=Escape +EnterKey=Enter +UpKey=Up +DownKey=Down +# If you have 6 keys you may define these as well +#LeftKey=Left +#RightKey=Right + +# If you have only 3 keys, you could use something like this: +#MenuKey=Escape +#EnterKey=Enter +#DownKey=Down + + + +### Driver sections are below this line, in alphabetical order ### + + +## EMAC BayRAD driver ## +[bayrad] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] +Speed=9600 + + + +## CrystalFontz driver (for CF632 & CF634) ## +[CFontz] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD size [default: 20x4] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] +Speed=9600 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + + + +## CrystalFontz633 driver (for CF633 only) ## +[CFontz633] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 +# Select the LCD type (size) [default: 16x2] +Size=16x2 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=19200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## CrystalFontz packet driver (for CF631, CF633 & CF635) ## +[CFontzPacket] + +# Select the LCD model [default: 633; legal: 631, 633, 635] +Model=635 +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 +# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] +Size=20x4 +# Set the initial contrast [default: 560; legal: 0 - 1000] +Contrast=350 +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 +# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=115200 +# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] +# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) +#NewFirmware=no +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# I want to reboot the LCD to make sure we start from a known state +Reboot=yes + + + +## Curses driver ## +[curses] + +# color settings +# foreground color [default: blue] +Foreground=blue +# background color when "backlight" is off [default: cyan] +Background=cyan +# background color when "backlight" is on [default: red] +Backlight=red + +# display size [default: 20x4] +Size=20x4 + +# What position (X,Y) to start the left top corner at... +# Default: (7,7) +TopLeftX=7 +TopLeftY=7 + +# use ASC symbols for icons & bars [default: no; legal, yes, no] +UseACS=no + + + +## Cwlinux driver ## +[CwLnx] + +# Select the LCD model [default: 12232; legal: 12232, 1602] +Model=12232 + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyUSB0 + +# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] +Size=20x4 + +# Set the communication speed [default: 19200; legal: 9600, 19200] +Speed=19200 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +# normally you shouldn't need this +Reboot=no + +# If you have a keypad connected. Keypad layout is currently not +# configureable from the config file. +Keypad=yes + +# If you have a non-standard keypad you can associate any keystrings to keys. +# There are 6 input keys in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following is the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + +# keypad_test_mode permits to test keypad assignement +# Default value is no +#keypad_test_mode=yes + + + +## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## +[ea65] + +# Device is fixed /dev/ttyS1 +# Width and Height are fixed 9x1 + +# As the VFD is self luminescent we don't have a backlight +# But we can use the backlight functions to control the front LEDs +# Brightness 0 to 299 -> LEDs off +# Brightness 300 to 699 -> LEDs half bright +# Brightness 700 to 1000 -> LEDs full bright +Brightness=500 +# OffBrightness is the the value used for the 'backlight off' state +OffBrightness=0 + + + +## EyeboxOne driver ## +[EyeboxOne] + +# Select the output device to use [default: /dev/ttyS1] +#Device=/dev/cua01 +Device=/dev/ttyS1 + +# Set the display size [default: 20x4] +Size=20x4 + +# Switch on the backlight? [default: yes] +Backlight=yes + +# Switch on the cursor? [default: no] +Cursor=no + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# Enter Key is a \r character, so it's hardcoded in the driver +LeftKey=D +RightKey=C +UpKey=A +DownKey=B +EscapeKey=P + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## g15 driver for Logitech G15 Keyboard LCDs ## +[g15] + +# Display size (currently unused) +size=20x5 + +## glcdlib meta driver for graphical LCDs ## +[glcdlib] + +## mandatory: + +# which graphical display supported by graphlcd-base to use [default: image] +# (see /etc/graphlcd.conf for possible drivers) +Driver=noritake800 + +# no=use graphlcd bitmap fonts (they have only one size / font file) +# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) +UseFT2=yes + +# text resolution in fixed width characters [default: 16x4] +# (if it won't fit according to available physical pixel resolutioni +# and the minimum available font face size in pixels, then +# 'DebugBorder' will automatically be turned on) +TextResolution=20x4 + +# path to font file to use +FontFile=/usr/share/fonts/corefonts/courbd.ttf + +## these only apply if UseFT2=yes: + +# character encoding to use +CharEncoding=iso8859-2 + +# minumum size in pixels in which fonts should be rendered +MinFontFaceSize=7x12 + +## optional: +Brightness=50 # Brightness (in %) if applicable +Contrast=50 # Contrast (in %) if applicable +Backlight=no # Backlight if applicable +UpsideDown=no # flip image upside down +Invert=no # invert light/dark pixels +ShowDebugFrame=no # turns on/off 1 pixel thick debugging + # border whithin the usable text area, + # for setting up TextResolution and + # MinFontFaceSize (if using FT2); +ShowBigBorder=no # border around the unused area +ShowThinBorder=yes # border around the unused area +PixelShiftX=0 +PixelShiftY=2 + + + +## Matrix Orbital GLK driver ## +[glk] + +# select the serial device to use [default: /dev/lcd] +Device=/dev/lcd + +# set the initial contrast value [default: 560; legal: 0 - 1000] +Contrast=560 + +# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] +Speed=19200 + + + +## Hitachi HD44780 driver ## +[hd44780] + +# Select what type of connection. See documentation for types. +ConnectionType=4bit + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device of the serial interface (default is /dev/lcd) +Device=/dev/ttyS0 + +# Bitrate of the serial port (0 for interface default) +Speed=0 + +# If you have a keypad connected. +# You may also need to configure the keypad layout further on in this file. +Keypad=no + +# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] +Contrast=0 + +# If you have a switchable backlight. +Backlight=no + +# If you have the additional output port ("bargraph") and you want to +# be able to control it with the lcdproc OUTPUT command +OutputPort=no + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + +# Specifies the size of the LCD. +# In case of multiple combined displays, this should be the total size. +Size=20x4 + +# For multiple combined displays: how many lines does each display have. +# Vspan=2,2 means both displays have 2 lines. +#vspan=2,2 + +# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', +# set this flag to get into extended mode (4-line linear). +# This flag is NOT the old obsolete Extended option. +#ExtendedMode=yes + +# Character map to to map ISO-8859-1 to the LCD's character set +# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ] +Charmap=hd44780_default + +# If your display is slow and cannot keep up with the flow of data from +# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 +# to increase the delays. Default: 1. +#DelayMult=2 + +# Some displays (e.g. vdr-wakeup) need a message from the driver to that it +# is still alive. When set to a value bigger then null the character in the +# upper left corner is updated every seconds. Default: 0. +#KeepAliveDisplay=0 + +# If you experience occasional garbage on your display you can use this +# option as workaround. If set to a value bigger than null it forces a +# full screen refresh seconds. Default: 0. +#RefreshDisplay=5 + +# You can reduce the inserted delays by setting this to false. +# On fast PCs it is possible your LCD does not respond correctly. +# Default: true. +DelayBus=true + +# If you have a keypad you can assign keystrings to the keys. +# See documentation for used terms and how to wire it. +# For example to give directly connected key 4 the string "Enter", use: +# KeyDirect_4=Enter +# For matrix keys use the X and Y coordinates of the key: +# KeyMatrix_1_3=Enter +KeyMatrix_4_1=Enter +KeyMatrix_4_2=Up +KeyMatrix_4_3=Down +KeyMatrix_4_4=Escape + + + +## ICP A106 driver ## +[icp_a106] +Device=/dev/ttyS1 + + + +## Code Mercenaries IO-Warrior driver ## +[IOWarrior] + +# display dimensions +Size=20x4 + +# serial number [exactly as listed by usbview] +# (if not given, the 1st IOWarrior found gets used) +#SerialNumber=00000674 + +# Specifies if the last line is pixel addressable or it controls an +# underline effect. [default: true (= pixel addressable); legal: yes, no] +#Lastline=true + + + +## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## +[imon] + +# select the device to use +Device=/dev/lcd0 + +# display dimensions +Size=16x2 + + + +## IrMan driver ## +[IrMan] +#if in trouble with IrMan, try Lirc emulator for IrMan + +# Select the input device to use +#Device=/dev/irman + +# Select the configuration file to use +#Config=/etc/irman.cfg + + + +## Joystick driver ## +[joy] + +# Select the input device to use [default: /dev/js0] +Device=/dev/js0 + +# set the axis map +Map_Axis1neg=Left +Map_Axis1pos=Right +Map_Axis2neg=Up +Map_Axis2pos=Down + +# set the button map +Map_Button1=Enter +Map_Button2=Escape + + + +## LB216 driver ## +[lb216] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Set the communication speed [default: 9600; legal: 2400, 9600] +Speed=9600 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## LCDM001 driver ## +[lcdm001] + +Device=/dev/ttyS1 + +# keypad settings +# Keyname Function +# Normal context Menu context +# ------- -------------- ------------ +# PauseKey Pause/Continue Enter/select +# BackKey Back(Go to previous screen) Up/Left +# ForwardKey Forward(Go to next screen) Down/Right +# MainMenuKey Open main menu Exit/Cancel +PauseKey=LeftKey +BackKey=UpKey +ForwardKey=DownKey +MainMenuKey=RightKey + +# You can rearrange the settings here. +# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h + + + +## HNE LCTerm driver ## +[lcterm] +Device=/dev/ttyS1 +Size=16x2 + + + +## LIRC input driver ## +[lirc] + +# Specify an alternative location of the lircrc file [default: ~/.lircrc] +#lircrc=/etc/lircrc.lcdproc + +# Must be the same as in your lircrc +#prog=lcdd + + + +##The driver for the VFD of the Medion MD8800 PC ## +[MD8800] +# device to use [default: /dev/ttyS1] +#Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=50 + + + +## MSI MS-6931 driver for displays in 1HU servers ## +[ms6931] + +# device to use [default: /dev/ttyS1] +Device=/dev/ttyS1 + +# display size [default: 16x2] +#Size=16x2 + + + +## MTC-S16209x driver ## +[mtc_s16209x] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the initial brightness [default: 255; legal: 0 - 255] +Brightness=255 + +# Reinitialize the LCD's BIOS [default: no; legal: yes, no] +Reboot=no + + + +## Matrix Orbital driver ## +[MtxOrb] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/ttyS0 + +# Set the display size [default: 20x4] +Size=20x4 + +# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] +Type=lkd + +# Set the initial contrast [default: 480] +# NOTE: The driver will ignore this if the display +# is a vfd or vkd as they don't have this feature +Contrast=480 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=0 + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] +Speed=19200 + +# The following table translates from MtxOrb key letters to logical key names. +# By default no keys are mapped, meaning the keypad is not used at all. +#KeyMap_A=Left +#KeyMap_B=Right +#KeyMap_C=Up +#KeyMap_D=Down +#KeyMap_E=Enter +#KeyMap_F=Escape +# See the [menu] section for an explanation of the key mappings + +# You can find out which key of your display sends which +# character by setting keypad_test_mode to yes and running +# LCDd. LCDd will output all characters it receives. +# Afterwards you can modify the settings above and set +# keypad_set_mode to no again. +keypad_test_mode=no + + + +## Noritake VFD driver ## +[NoritakeVFD] +# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] +Device=/dev/ttyS0 + +# Specifies the size of the LCD. +Size=20x4 + +# set the brightness +Brightness=255 + +# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# re-initialize VFD ? +#Reboot=yes + + + +## Mini-box.com picoLCD (usblcd) driver ## +[picolcd] +# This is for the Mini-Box.com usblcd device that ships with the M300. It can +# also be purchased separately but this driver has only been tested on the M300 +# setup. + +# KeyTimeout is the time that LCDd spends waiting for a key press before cycling +# through other duties. Higher values make LCDd use less CPU time and make +# key presses more detectable. Lower values make LCDd more responsive but a +# little prone to missing key presses. 500 (.5 second) is the default and a +# balanced value. +KeyTimeout=500 + +# Contrast: [default: 1000; legal: 0 - 1000] +Contrast=1000 + +# Light the keys? i[default: on; legal: on, off] +Keylights=on + +# If Keylights is on, the you can unlight specific keys below: +# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. +# There is no LED for the +/- keys. This is a handy way to indicate to users +# which keys are disabled. [default: on; legal: on, off] +Key0Light=on +Key1Light=on +Key2Light=on +Key3Light=on +Key4Light=on +Key5Light=on + + + +## Pyramid LCD driver ## +[pyramid] + +# device to connect to [default: /dev/lcd] +Device=/dev/ttyUSB0 + + + +## Seiko Epson 1330 driver ## +[sed1330] + +# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) +# Note: Currently only tested with G321D & SP14Q002. +Type=G321D + +# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] +CellSize=6x10 + +# Select what type of connection [legal: classic, bitshaker; default: classic] +ConnectionType=classic + + +## Seiko Epson 1520 driver ## +[sed1520] + +# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + + + +## serial POS display driver ## +[serialPOS] + +# Device to use in serial modea [default: /dev/lcd] +Device=/dev/lcd + +# Specifies the size of the display in characters. [default: 16x2] +Size=16x2 + +# Set the communication protocol to use with the POS display. +# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] +Type=AEDEX + +# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200] +Speed=9600 + + + +## Serial VFD driver ## +## Drives various (see below) serial 5x7dot VFD's. ## +[serialVFD] + +# Specifies the displaytype.[default: 0] +# 0 NEC (FIPC8367 based) VFDs. +# 1 KD Rev 2.1. +# 2 Noritake VFDs (*). +# 3 Futaba VFDs +# (* most should work, not testet yet.) +Type=0 + +# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] +use_parallel=no + +# Number of Custom-Characters [default: displaytype dependent] +#Custom-Characters=0 + +# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC +Port=0x378 + +# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 +Device=/dev/ttyS1 + +# Specifies the size of the VFD. +Size=20x2 + +# Set the initial brightness [default: 1000; legal: 0 - 1000] +# (4 steps 0-250, 251-500, 501-750, 751-1000) +Brightness=1000 +# Set the initial off-brightness [default: 0; legal: 0 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +# (4 steps 0-250, 251-500, 501-750, 751-1000) +OffBrightness=0 + +# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] +Speed=9600 + +# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] +#ISO_8859_1=yes + + + +## stv5730 driver ## +[stv5730] + +# Port the device is connected to [default: 0x378] +Port=0x378 + + + +## SVGAlib driver ## +[svga] + +# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] +#Mode=G640x480x256 + +# set display size [default: 20x4] +Size=20x4 + +# Set the initial contrast [default: 500; legal: 0 - 1000] +# Can be set but does not change anything internally +Contrast=500 + +# Set the initial brightness [default: 1000; legal: 1 - 1000] +Brightness=1000 + +# Set the initial off-brightness [default: 500; legal: 1 - 1000] +# This value is used when the display is normally +# switched off in case LCDd is inactive +OffBrightness=500 + + + +## Text driver ## +[text] +# Set the display size [default: 20x4] +Size=20x4 + + + +## Toshiba T6963 driver ## +[t6963] + +# set display size [default: 20x6] +Size=20x6 + +# port to use [default: 0x378; legal: 0x200 - 0x400] +Port=0x378 + +# Is ECP mode on? [default: yes; legal: yes, no] +#ECPlpt=yes + +# Use graphics? [default: no; legal: yes, no] +#graphic=no + + + +## Tyan Barebones LCD driver (GS10 & GS12 series) ## +[tyan] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 9600; legal: 4800, 9600] +Speed=9600 + +# set display size [default: 16x2] +Size=16x2 + + + +## ELV ula200 driver ## +[ula200] + +# Select the LCD size [default: 20x4] +Size=20x4 + +# If you have a non standard keypad you can associate any keystrings to keys. +# There are 6 input key in the CwLnx hardware that generate characters +# from 'A' to 'F'. +# +# The following it the built-in default mapping hardcoded in the driver. +# You can leave those unchanged if you have a standard keypad. +# You can change it if you want to report other keystrings or have a non +# standard keypad. +# KeyMap_A=Up +# KeyMap_B=Down +# KeyMap_C=Left +# KeyMap_D=Right +# KeyMap_E=Enter +# KeyMap_F=Escape + + + +## Wirz SLI LCD driver ## +[sli] + +# Select the output device to use [default: /dev/lcd] +Device=/dev/lcd + +# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] +Speed=19200 + + + +## OnScreen Display using libxosd ## +[xosd] + +# set display size [default: 20x4] +Size=20x4 + +# font to use, in XLFD format, as given by "xfontsel" +Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-* + + +# EOF diff --git a/abs/core-testing/LinHES-config/templates/cc.orig.sh b/abs/core-testing/LinHES-config/templates/cc.orig.sh new file mode 100755 index 0000000..d8fd2dc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc.orig.sh @@ -0,0 +1,35 @@ +#!/usr/bin/perl +# rwraithr added segment for 4 digit channels +# make sure to set this string to +# the corresponding remote in /etc/remoted.conf +#$remote_name = "RC-u43c-1h"; +$remote_name = "$REMOTE_NAME"; + +sub change_channel { + my($channel_digit) = @_; + system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit"); + sleep .5; +} + +$channel=$ARGV[0]; +sleep 1; +if (length($channel) > 3) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); + change_channel(substr($channel,2,1)); + change_channel(substr($channel,3,1)); +} elsif (length($channel) > 2) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); + change_channel(substr($channel,2,1)); +} elsif (length($channel) > 1) { + change_channel(substr($channel,0,1)); + change_channel(substr($channel,1,1)); +} else { + change_channel(substr($channel,0,1)); +} +system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT"); + +#system ("sleep 2"); +#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2"); +#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2"); diff --git a/abs/core-testing/LinHES-config/templates/cc.sh b/abs/core-testing/LinHES-config/templates/cc.sh new file mode 100755 index 0000000..0cce308 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc.sh @@ -0,0 +1,5 @@ +#!/bin/bash +/usr/local/bin/cc.orig.sh $@ & +/usr/local/bin/cc_vol.sh & + + diff --git a/abs/core-testing/LinHES-config/templates/cc_vol.sh b/abs/core-testing/LinHES-config/templates/cc_vol.sh new file mode 100755 index 0000000..819008d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cc_vol.sh @@ -0,0 +1,5 @@ +#!/bin/bash +sleep 2 +/usr/local/bin/ivtvctl -p 2 -d /dev/video2 +/usr/local/bin/ivtvctl -p 1 -d /dev/video2 + diff --git a/abs/core-testing/LinHES-config/templates/change_chan.sh b/abs/core-testing/LinHES-config/templates/change_chan.sh new file mode 100755 index 0000000..5ad8765 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/change_chan.sh @@ -0,0 +1,19 @@ +#!/bin/sh +REMOTE_NAME=SA3250 +cmd="$1" + +case $cmd in + [0-9]*) + for digit in $(echo $1 | sed -e 's/./& /g'); do + irsend SEND_ONCE $REMOTE_NAME $digit + sleep 0.3 + # If things work OK with sleep 1, try this for faster channel changes: + # sleep 0.3 + done + ;; + + *) + irsend SEND_ONCE $REMOTE_NAME $cmd + ;; + esac +# /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config/templates/cron.template b/abs/core-testing/LinHES-config/templates/cron.template new file mode 100644 index 0000000..3fcea10 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/cron.template @@ -0,0 +1,4 @@ +# + + +00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1 \ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address new file mode 100644 index 0000000..1df28d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4address @@ -0,0 +1,2 @@ +192.168.1.158/24 + diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route new file mode 100644 index 0000000..373a4d1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/ipv4route @@ -0,0 +1,2 @@ +default via 192.168.1.1 + diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig new file mode 100644 index 0000000..b1f14e0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/iwconfig @@ -0,0 +1,2 @@ +essid home_lan +#key ababababab diff --git a/abs/core-testing/LinHES-config/templates/etcnet/eth/options b/abs/core-testing/LinHES-config/templates/etcnet/eth/options new file mode 100644 index 0000000..929da58 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/etcnet/eth/options @@ -0,0 +1,7 @@ +# If you want to change current interface name, edit /etc/net/iftab, +# rename current directory and uncomment this line: +TYPE=eth +DISABLED=no +BOOTPROTO=dhcp +ONBOOT=yes +CONFIG_WIRELESS=no diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-4 new file mode 100644 index 0000000..e69de29 diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-8 new file mode 100644 index 0000000..e69de29 diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage-Full new file mode 100644 index 0000000..e69de29 diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac new file mode 100644 index 0000000..0e3a708 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-minipac @@ -0,0 +1,3 @@ +"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" +"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject" + diff --git a/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid new file mode 100644 index 0000000..7cb2e34 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/evrouter/MythVantage8-uhid @@ -0,0 +1,3 @@ +"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" +"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject" + diff --git a/abs/core-testing/LinHES-config/templates/exports.template b/abs/core-testing/LinHES-config/templates/exports.template new file mode 100644 index 0000000..b946287 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/exports.template @@ -0,0 +1,8 @@ +# /etc/exports +# +# See exports(5) for a description. + +# use exportfs -arv to reread +/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) +/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) + diff --git a/abs/core-testing/LinHES-config/templates/fstab.conf.template b/abs/core-testing/LinHES-config/templates/fstab.conf.template new file mode 100755 index 0000000..d27bcd9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/fstab.conf.template @@ -0,0 +1,16 @@ +# +# /etc/fstab: static file system information +# +# +none /dev/pts devpts defaults 0 0 +none /dev/shm tmpfs defaults 0 0 + +/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 +/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 +/dev/fd0 /mnt/fl vfat user,noauto 0 0 + +/dev/sda1 / reiserfs defaults 0 1 +/dev/sda2 swap swap defaults 0 0 +/dev/sda3 /data reiserfs defaults 0 0 +192.168.1.6:/media /data/media nfs + diff --git a/abs/core-testing/LinHES-config/templates/mysql.service b/abs/core-testing/LinHES-config/templates/mysql.service new file mode 100644 index 0000000..160450e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/mysql.service @@ -0,0 +1,13 @@ + + + + + + mysql_myth on %h + + + _mysql._tcp + 3306 + + + diff --git a/abs/core-testing/LinHES-config/templates/mysql.txt b/abs/core-testing/LinHES-config/templates/mysql.txt new file mode 100755 index 0000000..04531b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/mysql.txt @@ -0,0 +1,29 @@ +DBHostName=127.0.0.1 +DBUserName=mythtv +DBPassword=mythtv +DBName=mythconverg +DBType=QMYSQL3 + +# Set the following if you want to use something other than the +# machine's real hostname for identifying settings in the database. +# This is useful if your hostname changes often, as otherwise +# you'll need to reconfigure mythtv (or futz with the DB) every time. +# TWO HOSTS MUST NOT USE THE SAME VALUE +# +#LocalHostName=my-unique-identifier-goes-here + +# If you want your frontend to be able to wake your MySQL server +# using WakeOnLan, have a look at the following settings: +# +# Set the time the frontend waits (in seconds) between reconnect tries. +# This should be the rough time your MySQL server needs for startup +#WOLsqlReconnectWaitTime=0 +# +# +# This is the amount of retries to wake the MySQL server until the frontend +# gives up +#WOLsqlConnectRetry=5 +# +# +# This is the command executed to wake your MySQL server. +#WOLsqlCommand=echo 'WOLsqlServerCommand not set' diff --git a/abs/core-testing/LinHES-config/templates/ncid.conf.template b/abs/core-testing/LinHES-config/templates/ncid.conf.template new file mode 100755 index 0000000..43ef490 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/ncid.conf.template @@ -0,0 +1,51 @@ +# tcl/tk configuration file + +# Directory NCID uses to find the helper scripts +set ProgDir /usr/share/ncid + +# default helper script +set EXTPROG ncid-osd + +# Set Host to the NCID server address +# Host defaults to 127.0.0.1 +#set Host 127.0.0.1 +set Host 192.168.1.5 + +# The NCID port default is 3333 +set Port 3333 + +# If the connection to the server is lost, +# try every Delay seconds to reconnect +# The Default: 60 +set Delay 20 + +# If set to 1, display raw data received from the NCID server +# If set to 0, do not display raw data received from the NCID server +# Default: 0 +set Raw 0 + +# If set to 1, output: date time number name +# If set to 0, output: name number +# Default: 0 +set All 1 + +# If set to 1, display formatted CID, and CID log file on connect +# If set to 0, ddo not isplay formatted CID, and CID log file on connect +# Default: 0 +set Verbose 0 + +# If set to 1, display information in terminal progran or external program +# If set to 0, display information using a GUI +# Default: 0 +set NoGUI 1 + +# output name and number to external program +# Default: 0 +set Callprog 1 + +# ring number to call external program +# Default: 0 +set CallOnRing 0 + +# external called program +set Program [list $ProgDir/$EXTPROG] diff --git a/abs/core-testing/LinHES-config/templates/ncidd.conf.template b/abs/core-testing/LinHES-config/templates/ncidd.conf.template new file mode 100644 index 0000000..daa2e79 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/ncidd.conf.template @@ -0,0 +1,143 @@ +# ncid - Network CallerID Server Config File + +################################ +# Definitions and Line formats # +################################ + +# lines can be blank, or start with the words: send, set # +# +# A line is divided into words, separated by spaces +# +# A word is either a string of non-blank characters, everything +# between double quotes, or an equal sign. +# +# SEND LINE FORMAT: +# send DATATYPE [DATATYPE] ... +# where DATATYPE = cidlog, cidinfo +# +# SET LINE FORMAT: +# set ITEM = VALUE [ITEM = VALUE] ... +# where ITEM = cidalias, cidlog, datalog, initcid, initstr, +# lockfile, port, ttyclocal, ttyport, ttyspeed, +# nomodem + +############################ +# Log and Info for Clients # +############################ + +# Send the call log to a client when connected +# The default is not to send the call log file +send cidlog + +# Send call info (LINE and RING) to a client at each ring +# The default is not to send the call info line +send cidinfo + +############################ +# NCID Communications Port # +############################ + +# The default TCP/IP port is 3333 + set port = 3333 + +####################### +# Alias and Log Files # +####################### + +# The default CID alias file: /etc/ncid/ncidd.alias +# set cidalias = /etc/ncid/ncidd.alias + +# The default CID call log file: /var/log/cidcall.log +# the log file must exist, ncidd will not create it +# (also make the change in /etc/logrotate.d/ncidd +# and also /etc/ncid/ncidrotate.conf) +# set cidlog = /var/log/cidcall.log + +# The default tty data log file: /var/log/ciddata.log +# the log file must exist, ncidd will not create it +# (also make the change in /etc/logrotate.d/ncidd +# and also /etc/ncid/ncidrotate.conf) +# set datalog = /var/log/ciddata.log + +##################### +# TTY Configuration # +##################### + +# The default tty port: /dev/modem +# set ttyport = /dev/cu.modem # Macintosh OS X + set ttyport = /dev/ttyS1 + +# The default tty port speed: 19200 +# The tty speed can be one of: 38400, 19200, 9600, 4800 +# set ttyspeed = 4800 # NetCallerID port speed + +# Ignore tty control signals for internal modems and 3 wire serial cables +# Disable tty control signals: ttyclocal = 1 +# Enable tty control signals: ttyclocal = 0 (default) +# set ttyclocal = 1 + +# The lockfile name is generated automatically +# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem +# set lockfile = /var/lock/LCK..ttyS0 + +##################### +# Modem or No Modem # +##################### + +# Obtain CallerID from a CID device or a modem +# device: nomodem = 1 (do not send AT commands) +# modem: nomodem = 0 (default - send AT commands) +# set nomodem = 1 + +######################## +# Modem Initialization # +######################## + +# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" +# set initstr = "ATE1V1Q0" +# +# Alternate modem initialization string +# set initstr = "AT&FE1V1Q0+VIP" + +# Addon strings to set modem for Distinctive Ring: +# http://www.modemsite.com/56k/dring.asp +# +# 3Com/USR/TI chipset: ATS41=1 +# Reported Ring Codes: RING A, RING B, RING C +# Rockwell/Conexant chipset: AT-SDR=7 +# Reported Ring Codes: RING 1, RING 2, RING 3 +# Lucent/Agere chipset: AT+VDR=1,0 +# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 +# +# Example adds 3Com DR to the default modem initialization +# set initstr = "ATE1V1Q0S41=1" + +# The default for ncidd is to try two CID strings to setup +# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". +# set initcid = "AT#CID=1" +# +# Alternate CID strings to try if default does not work: +# set initcid = "AT+FCLASS=8;+VCID=1" +# set initcid = "AT-STE=1;+VCID=1" +# set initcid = "AT-STE=1;#CID=1" + +################# +# TiVo Settings # +################# +# set ttyclocal = 1 # TiVo requires CLOCAL +# set ttyport = /dev/ttyS1 # TiVo Modem Port +# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port +# +# To use a modem on the TiVo serial port +# Tivo (stereo mini jack) -> +# -> (stereo mini plug) TiVo serial cable (9-pin male) -> +# -> (9-pin Female) PC modem cable (25-pin Male -> +# -> (25-pin Female) Modem +# if the modem has switches, disable DTR +# Use this string to set the modem before attaching it to the TiVo: +# AT&F0&D0&B1&W +# +# set ttyport = /dev/ttyS3 # TiVo Serial Port +# +# End TiVo Settings + diff --git a/abs/core-testing/LinHES-config/templates/real_change_chan.sh b/abs/core-testing/LinHES-config/templates/real_change_chan.sh new file mode 100755 index 0000000..efeba88 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/real_change_chan.sh @@ -0,0 +1,19 @@ +#!/bin/sh +REMOTE_NAME=SA3250 +cmd="$1" + +case $cmd in + [0-9]*) + for digit in $(echo $1 | sed -e 's/./& /g'); do + irsend SEND_ONCE $REMOTE_NAME $digit + sleep 0.3 + # If things work OK with sleep 1, try this for faster channel changes: + # sleep 0.3 + done + ;; + + *) + irsend SEND_ONCE $REMOTE_NAME $cmd + ;; + esac + /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf new file mode 100644 index 0000000..e7c1539 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircd.ATI.conf @@ -0,0 +1,357 @@ + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004 +# +# contributed by +# +# brand: ATI Remote Wonder +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name wonder + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 147987 + toggle_bit 0 + + + begin codes + A 0x0000000014C500F0 + B 0x0000000014C601F0 + POWER 0x0000000014C702F0 + TV 0x0000000014C803F0 + DVD 0x0000000014C904F0 + WEB 0x0000000014CA05F0 + GUIDE 0x0000000014CB06F0 + GRAB 0x0000000014CC07F0 + VOL_DOWN 0x0000000014CE09F0 + VOL_UP 0x0000000014CD08F0 + MUTE 0x0000000014CF0AF0 + CH_DOWN 0x0000000014D10CF0 + CH_UP 0x0000000014D00BF0 + A 0x0000000014C500F0 + B 0x0000000014C601F0 + 1 0x0000000014D20DF0 + 2 0x0000000014D30EF0 + 3 0x0000000014D40FF0 + 4 0x0000000014D510F0 + 5 0x0000000014D611F0 + 6 0x0000000014D712F0 + 7 0x0000000014D813F0 + 8 0x0000000014D914F0 + 9 0x0000000014DA15F0 + 0 0x0000000014DC17F0 + MENU 0x0000000014DB16F0 + CHECK 0x0000000014DD18F0 + C 0x0000000014DE19F0 + D 0x0000000014E01BF0 + UP 0x0000000014DF1AF0 + LEFT 0x0000000014E21DF0 + DOWN 0x0000000014E722F0 + RIGHT 0x0000000014E41FF0 + OK 0x0000000014E31EF0 + REPLAY 0x0000000014E11CF0 + FULLSCREEN 0x0000000014E520F0 + E 0x0000000014E621F0 + F 0x0000000014E823F0 + REWIND 0x0000000014E924F0 + FORWARD 0x0000000014EB26F0 + PLAY 0x0000000014EA25F0 + RECORD 0x0000000014EC27F0 + STOP 0x0000000014ED28F0 + PAUSE 0x0000000014EE29F0 + end codes + +end remote + + + +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 +# +# contributed by Steffen +# +# brand: ATI Sapphire Remote Bob II USB +# model no. of remote control: 5000024400 +# devices being controlled by this remote: MythTV +# + +begin remote + +name wonder II +bits 16 +eps 30 +aeps 100 + +one 0 0 +zero 0 0 +pre_data_bits 8 +pre_data 0x0 +post_data_bits 16 +post_data 0x0 +gap 299851 +toggle_bit 0 + + +begin codes +aux1 0x023F +aux2 0x023F +aux3 0x023F +aux4 0x023F +mouse_left_btn 0x02A9 +mouse_right_btn 0x02AA +a 0x0278 +b 0x0279 +power 0x020C +dvd 0x0238 +tv 0x0239 +help 0x02BE +pc 0x023F +resize 0x02D5 +hand 0x02D0 +ati 0x028E +vol_up 0x0210 +vol_down 0x0211 +mute 0x020D +ch_up 0x0220 +ch_down 0x0221 +mouse_up 0x013F +mouse_down 0x013F +mouse_left 0x013F +mouse_right 0x013F +1 0x0201 +2 0x0202 +3 0x0203 +4 0x0204 +5 0x0205 +6 0x0206 +7 0x0207 +8 0x0208 +9 0x0209 +0 0x0200 +list 0x0254 +check 0x0282 +info 0x02F9 +timer 0x0296 +arrow_up 0x0258 +arrow_left 0x025A +arrow_right 0x025B +arrow_down 0x0259 +ok 0x025C +c 0x017A +d 0x027B +play 0x022C +e 0x027C +f 0x027D +rewind 0x0229 +rec 0x0237 +stop 0x0231 +pause 0x0230 +ffwd 0x0228 +end codes + +end remote + + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004 +# +# contributed by gLaNDix +# +# brand: ATI +# model no. of remote control: 5000023600 +# devices being controlled by this remote: MythTV 0.14 +# +# USB ID: 0bc7:0004 +# + +begin remote + + name REMOTE_WONDER + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227933 + toggle_bit 0 + + + begin codes + A 0x000000000000D500 + B 0x000000000000D601 + C 0x000000000000EE19 + D 0x000000000000F01B + E 0x000000000000F621 + F 0x000000000000F823 + POWER 0x000000000000D702 + TV 0x000000000000D803 + DVD 0x000000000000D904 + WEB 0x000000000000DA05 + BOOK 0x000000000000DB06 + HAND 0x000000000000DC07 + MOUSE_LEFT_BTN 0x0000000000004D78 + MOUSE_LEFTBUTTONUP 0x0000000000004E79 + MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79 + MOUSE_RIGHT_BTN 0x000000000000517C + MOUSE_RIGHTBUTTONUP 0x000000000000527D + MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E + MOUSE_LEFT 0x0000000000004570 + MOUSE_RIGHT 0x0000000000004671 + MOUSE_UP 0x0000000000004772 + MOUSE_DOWN 0x0000000000004873 + MOUSE_UPRIGHT 0x0000000000004A75 + MOUSE_DOWNRIGHT 0x0000000000004B76 + MOUSE_DOWNLEFT 0x0000000000004C77 + MOUSE_UPLEFT 0x0000000000004974 + VOL_UP 0x000000000000DD08 + VOL_DOWN 0x000000000000DE09 + MUTE 0x000000000000DF0A + CH_DOWN 0x000000000000E10C + CH_UP 0x000000000000E00B + 1 0x000000000000E20D + 2 0x000000000000E30E + 3 0x000000000000E40F + 4 0x000000000000E510 + 5 0x000000000000E611 + 6 0x000000000000E712 + 7 0x000000000000E813 + 8 0x000000000000E914 + 9 0x000000000000EA15 + 0 0x000000000000EC17 + DVD_ROOTMENU 0x000000000000EB16 + SETUP 0x000000000000ED18 + ARROW_UP 0x000000000000EF1A + ARROW_RIGHT 0x000000000000F41F + ARROW_DOWN 0x000000000000F722 + ARROW_LEFT 0x000000000000F21D + OK 0x000000000000F31E + MAXAMIZE 0x000000000000F520 + TV_ON_DEMAND 0x000000000000F11C + BACK 0x000000000000F924 + PLAY 0x000000000000FA25 + NEXT 0x000000000000FB26 + RECORD 0x000000000000FC27 + STOP 0x000000000000FD28 + PAUSE 0x000000000000FE29 + end codes + +end remote + + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 +# +# contributed by Jason Piterak +# +# brand: ati +# This uses the atiusb driver +#=20 +# model no. of remote control: 5000022000 +# +# devices being controlled by this remote: +# MythTV PVR using knopmyth by Cecil and Dale at +# http://mysettopbox.tv +# Key map names are as per ATI's website: +#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html +# Feel free to change them as you see fit :-) +# +# NOTE: There are 16 channels for this remote; this file only +# supports one channel. See the GATOS project for information +# on how to change the channel. Not tested. Unknown channel. +# + +begin remote + + name atiusb + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0xF000 + gap 139891 + toggle_bit 0 + + + begin codes + a 0x000000000000C500 + b 0x000000000000C601 + power 0x000000000000C702 + tv 0x000000000000C803 + dvd 0x000000000000C904 + web 0x000000000000CA05 + media_library 0x000000000000CB06 + drag 0x000000000000CC07 + mouse-button_left 0x0000000000003D78 + mouse-button_right 0x000000000000417C + mouse-up 0x0000000000003772 + mouse-down 0x0000000000003873 + mouse-left 0x0000000000003570 + mouse-right 0x0000000000003671 + mouse-left_up 0x0000000000003974 + mouse-right_up 0x0000000000003A75 + mouse-left_down 0x0000000000003C77 + mouse-right_down 0x0000000000003B76 + vol-up 0x000000000000CD08 + vol-down 0x000000000000CE09 + mute 0x000000000000CF0A + chan-up 0x000000000000D00B + chan-down 0x000000000000D10C + 1 0x000000000000D20D + 2 0x000000000000D30E + 3 0x000000000000D40F + 4 0x000000000000D510 + 5 0x000000000000D611 + 6 0x000000000000D712 + 7 0x000000000000D813 + 8 0x000000000000D914 + 9 0x000000000000DA15 + 0 0x000000000000DC17 + dvd-root_menu 0x000000000000DB16 + launch_setup 0x000000000000DD18 + c 0x000000000000DE19 + d 0x000000000000E01B + tv_on_demand 0x000000000000E11C + max_window 0x000000000000E520 + cursor-up 0x000000000000DF1A + cursor-down 0x000000000000E722 + cursor-left 0x000000000000E21D + cursor-right 0x000000000000E41F + ok 0x000000000000E31E + e 0x000000000000E621 + f 0x000000000000E823 + rewind 0x000000000000E924 + play 0x000000000000EA25 + fast_forward 0x000000000000EB26 + record 0x000000000000EC27 + stop 0x000000000000ED28 + pause 0x000000000000EE29 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt new file mode 100644 index 0000000..80eec07 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/lircrc-atiwonder.txt @@ -0,0 +1,922 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the ATI-Wonder Remote +# using lirc_atiusb driver +# + +begin +prog = mythtv +button = a +config = E +repeat = 5 +end + +begin +prog = mythtv +button = A +config = E +repeat = 5 +end + +begin +prog = mythtv +button = b +config = O +repeat = 5 +end + +begin +prog = mythtv +button = B +config = O +repeat = 5 +end + +begin +prog = mythtv +button = B +config = O +repeat = 5 +end + +begin +prog = mythtv +button = stop +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = STOP +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = ffwd +config = Right +repeat = 5 +end + +begin +prog = mythtv +button = FORWARD +config = Right +repeat = 5 +end + +begin +prog = mythtv +button = rewind +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = REWIND +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = pause +config = P +repeat = 5 +end + +begin +prog = mythtv +button = PAUSE +config = P +repeat = 5 +end + +begin +prog = mythtv +button = play +config = P +repeat = 5 +end + +begin +prog = mythtv +button = PLAY +config = P +repeat = 5 +end + +begin +prog = mythtv +button = mute +config = | +repeat = 5 +end + +begin +prog = mythtv +button = MUTE +config = | +repeat = 5 +end + +begin +prog = mythtv +button = vol_down +config = F10 +repeat = 5 +end + +begin +prog = mythtv +button = VOL_DOWN +config = F10 +repeat = 5 +end + +begin +prog = mythtv +button = vol_up +config = F11 +repeat = 5 +end + +begin +prog = mythtv +button = VOL_UP +config = F11 +repeat = 5 +end + +begin +prog = mythtv +button = f +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = F +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = e +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = E +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = ch_up +config = Up +repeat = 5 +end + +begin +prog = mythtv +button = CH_UP +config = Up +repeat = 5 +end + +begin +prog = mythtv +button = ch_down +config = Down +repeat = 5 +end + +begin +prog = mythtv +button = CH_DOWN +config = Down +repeat = 5 +end + +begin +prog = mythtv +button = ok +config = Enter +repeat = 5 +end + +begin +prog = mythtv +button = OK +config = Enter +repeat = 5 +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin +prog = mythtv +button = rec +config = R +repeat = 5 +end + +begin +prog = mythtv +button = RECORD +config = R +repeat = 5 +end + + +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the ATI-Wonder Remote +# using lirc_atiusb driver +# + +begin +#Jumppoint for Program Guide created in Mythweb + prog = mythtv + button = TV + config = ! +end + +begin +#Jumppoint for DVD playback created in Mythweb + prog = mythtv + button = DVD + config = @ +end + +begin + prog = mythtv +#Jumppoint for MythWeater created in Mythweb + button = WEB + config = # +end + +begin + prog = mythtv +#Jumppoint for MythVideo created in Mythweb + button = BOOK + config = $ +end + +begin + prog = mythtv +#Jumppoint for MythWeater created in Mythweb + button = HAND + config = % +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin + prog = mythtv + button = MOUSE_UP + config = Up +end + +begin + prog = mythtv + button = MOUSE_DOWN + config = Down +end + +begin + prog = mythtv + button = MOUSE_LEFT + config = Left +end + +begin + prog = mythtv + button = MOUSE_RIGHT + config = Right +end + +begin + prog = mythtv + button = MOUSE_RIGHT_BTN + config = Esc +end + +begin + prog = mythtv +# Enter button + button = MOUSE_LEFT_BTN + config = Return +end + +begin + prog = mythtv + button = POWER + config = Esc +end + +begin + prog = mythtv +# Enter button + button = OK + config = Return +end + +begin + prog = mythtv + button = ARROW_UP + config = Up +end + +begin + prog = mythtv + button = ARROW_DOWN + config = Down +end + +begin + prog = mythtv + button = ARROW_LEFT + config = Left +end + +begin + prog = mythtv + button = ARROW_RIGHT + config = Right +end + +begin + prog = mythtv + button = D + config = Esc +end + +begin +prog = mythtv +button = CH_UP +config = Up +end + +begin +prog = mythtv +button = CH_DOWN +config = Down +end + +begin + prog = mythtv + button = VOL_DOWN + repeat = 3 + config = F10 +end + +begin + prog = mythtv + button = VOL_UP + repeat = 3 + config = F11 +end + +begin + prog = mythtv + button = MUTE + config = | +end + +begin + prog = mythtv + button = DVD_ROOTMENU + config = M +end + +begin + prog = mythtv +# Enter button + button = SETUP + config = Return +end + + +begin + prog = mythtv + button = A + config = S +end + +begin + prog = mythtv + button = B + config = I +end + +begin + prog = mythtv + button = C + config = T +end + +begin +prog = mythtv +# Change focus for PiP (to change channel in the other window) +button = MAXAMIZE +config = B +end + +begin +prog = mythtv +# Toggle PiP on/off +button = TV_ON_DEMAND +config = V +end + +begin + prog = mythtv + button = BACK + config = < +end + +begin + prog = mythtv + button = NEXT + config = > +end + +begin + prog = mythtv + button = BACK + config = Left +end + + +begin + prog = mythtv + button = NEXT + config = Right +end + +begin +prog = mythtv +button = RECORD +config = R +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = P +end + +begin +prog = mythtv +button = PAUSE +config = P +end + +#Page Up/Down +begin +prog = mythtv +button = E +config = PgUp +end + +begin +prog = mythtv +button = F +config = PgDown +end + +begin +prog = mythtv +button = E +# Use for backwards commercial skip +config = Q +end + +begin +prog = mythtv +button = F +# Use for forward commercial skip +config = Z +end + +#Mplayer + +begin +prog = mplayer +button = PLAY +config = pause +end + +begin +prog = mplayer +button = PAUSE +config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = D +config = quit +end + +begin +prog = mplayer +button = MOUSE_RIGHT_BTN +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = E +repeat = 6 +config = seek -10 +end + +begin +prog = mplayer +button = F +repeat = 6 +config = seek 10 +end + +begin +prog = mplayer +button = BACK +repeat = 6 +config = seek -70 +end + +begin +prog = mplayer +button = NEXT +repeat = 6 +config = seek 70 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 6 +config = volume -1 +end + +begin +prog = mplayer +button = VOL_UP +repeat = 6 +config = volume 1 +end + +#Xine + +begin +prog = xine +button = PLAY +config = Play +end + +begin +prog = xine +button = PAUSE +config = PAUSE +end + +begin +prog = xine +button = Mute +config = Mute +end + +begin +prog = xine +button = STOP +config = Stop +end + +begin +prog = xine +button = POWER +config = Quit +end + +begin +prog = xine +button = D +config = quit +end + +begin +prog = xine +button = MOUSE_RIGHT_BTN +config = quit +end + +begin +prog = xine +button = ARROW_UP +repeat = 4 +config = EventUp +end + +begin +prog = xine +button = ARROW_DOWN +repeat = 4 +config = EventDown +end + +begin +prog = xine +button = ARROW_LEFT +repeat = 4 +config = EventLeft +end + +begin +prog = xine +button = ARROW_RIGHT +repeat = 4 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 0 +config = EventSelect +end + +begin +prog = xine +button = MOUSE_UP +repeat = 4 +config = EventUp +end + +begin +prog = xine +button = MOUSE_DOWN +repeat = 4 +config = EventDown +end + +begin +prog = xine +button = MOUSE_LEFT +repeat = 4 +config = EventLeft +end + +begin +prog = xine +button = MOUSE_RIGHT +repeat = 4 +config = EventRight +end + +begin +prog = xine +button = MOUSE_LEFT_BTN +repeat = 0 +config = EventSelect +end + +begin +prog = xine +button = DVD_ROOTMENU +repeat = 0 +config = Menu +end + +#vol down +begin +prog = xine +button = VOL_DOWN +repeat = 1 +config = Volume- +end + +#vol up +begin +prog = xine +button = VOL_UP +repeat = 1 +config = Volume+ +end + +begin +prog = xine +button = TV_ON_DEMAND +repeat = 1 +config = ZoomIn +end + +begin +prog = xine +button = MAXAMIZE +repeat = 1 +config = ZoomOut +end + +#skip chapter forward +begin +prog = xine +button = NEXT +repeat = 1 +config = EventNext +end + +#skip chapter backward +begin +prog = xine +button = BACK +repeat = 1 +config = EventPrior +end + +begin +prog = xine +button = F +repeat = 2 +config = SeekRelative+45 +end + +begin +prog = xine +button = E +repeat = 2 +config = SeekRelative-45 +end + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg new file mode 100644 index 0000000..351a111 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/ATI_wonder/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS new file mode 100644 index 0000000..b76d32c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS @@ -0,0 +1,115 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 +# +# contributed by +# +# brand: RS_LD_120-MX500 +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name RS_LD + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 384 1920 + zero 384 896 + ptrail 384 + gap 70400 + min_repeat 2 + toggle_bit 0 + + + begin codes + RESET 0x19FD + TIME 0X1902 + BLANK 0X1B02 + PICTURE 0X1882 + ASPECT 0X1A82 + BROWSE 0X1982 + DELETE 0X1B82 + CARD 0X1842 + CARD_SOURCE 0X1A42 + SPARE1 0X1942 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc new file mode 100644 index 0000000..5e668b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/lircrc @@ -0,0 +1,832 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 4 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +end + +begin +prog = mythtv +button = OK +config = Return +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +end + +begin +prog = mythtv +button = EXIT +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = Space +end + +begin +prog = mythtv +button = PAUSE +config = p +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +end + +begin +prog = mythtv +button = RECORD +config = r +end + +begin +prog = mythtv +# rewind +button = << +config = Home +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = i +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg new file mode 100644 index 0000000..38857f9 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/MX-500-jams/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf new file mode 100644 index 0000000..b76d32c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircd.conf @@ -0,0 +1,115 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + + +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 +# +# contributed by +# +# brand: RS_LD_120-MX500 +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name RS_LD + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 384 1920 + zero 384 896 + ptrail 384 + gap 70400 + min_repeat 2 + toggle_bit 0 + + + begin codes + RESET 0x19FD + TIME 0X1902 + BLANK 0X1B02 + PICTURE 0X1882 + ASPECT 0X1A82 + BROWSE 0X1982 + DELETE 0X1B82 + CARD 0X1842 + CARD_SOURCE 0X1A42 + SPARE1 0X1942 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc new file mode 100755 index 0000000..2663c63 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/lircrc @@ -0,0 +1,857 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 5 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +repeat = 5 +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +repeat = 5 +end + +begin +prog = mythtv +button = 1 +config = 1 +repeat = 5 +end + +begin +prog = mythtv +button = 2 +config = 2 +repeat = 5 +end + +begin +prog = mythtv +button = 3 +config = 3 +repeat = 5 +end + +begin +prog = mythtv +button = 4 +config = 4 +repeat = 5 +end + +begin +prog = mythtv +button = 5 +config = 5 +repeat = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +repeat = 5 +end + +begin +prog = mythtv +button = 7 +config = 7 +repeat = 5 +end + +begin +prog = mythtv +button = 8 +config = 8 +repeat = 5 +end + +begin +prog = mythtv +button = 9 +config = 9 +repeat = 5 +end + + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +repeat = 5 +end + +begin +prog = mythtv +button = OK +config = Return +repeat = 5 +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +repeat = 5 +end + +begin +prog = mythtv +button = EXIT +config = Esc +repeat = 5 +end + +begin +prog = mythtv +button = PLAY +config = Space +repeat = 5 +end + +begin +prog = mythtv +button = PAUSE +config = p +repeat = 5 +end + +begin +prog = mythtv +button = STOP +config = Esc +repeat = 5 +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +repeat = 5 +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +repeat = 5 +end + +begin +prog = mythtv +button = RECORD +config = r +repeat = 5 +end + +begin +prog = mythtv +# rewind +button = << +config = Home +repeat = 5 +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +repeat = 5 +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = S +repeat = 5 +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg new file mode 100644 index 0000000..e2af610 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/MythVantage-one/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf new file mode 100644 index 0000000..f8175f3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf @@ -0,0 +1,87 @@ +# this config file was generated +# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 +# +# contributed by Jarod Wilson +#------------------------------------------------------------------------------ +# +# filename: RadioShack_15-2116-vcr0081.lirc +# encoding: RC-5 +# brand: RadioShack Universal (and others) +# model: 15-2116, set as VCR type 0081 +# supported devices: all +# +# note: requires quite a bit of key reassignment w/keymover and EFCs... +# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO +# +#------------------------------------------------------------------------------ + +begin remote + + name rs15-2116-vcr0081 + bits 11 + flags RC5|CONST_LENGTH + eps 20 + aeps 0 + header 0 0 + one 889 889 + zero 889 889 + plead 889 + ptrail 0 + foot 0 0 + repeat 0 0 + pre_data_bits 2 + pre_data 0x02 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 113792 + toggle_bit 2 + frequency 36000 + duty_cycle 50 + + begin codes + 0 0x0000000000000140 + 1 0x0000000000000141 + 2 0x0000000000000142 + 3 0x0000000000000143 + 4 0x0000000000000144 + 5 0x0000000000000145 + 6 0x0000000000000146 + 7 0x0000000000000147 + 8 0x0000000000000148 + 9 0x0000000000000149 + INFO 0x000000000000014a + SELECT 0x000000000000014b + POWER 0x000000000000014c + MUTE 0x000000000000014d + MOVE 0x000000000000014e + VOL+ 0x0000000000000150 + VOL- 0x0000000000000151 + RIGHT 0x000000000000015a + LEFT 0x000000000000015b + ENTER 0x000000000000015c + MENU 0x000000000000015d + CH+ 0x0000000000000160 + CH- 0x0000000000000161 + PIP 0x0000000000000162 + SWAP 0x0000000000000163 + SLEEP 0x0000000000000166 + FREEZE 0x0000000000000168 + PAUSE 0x0000000000000169 + SKIP 0x000000000000016a + EXIT 0x0000000000000171 + REW 0x0000000000000172 + REPLAY 0x0000000000000173 + FFWD 0x0000000000000174 + PLAY 0x0000000000000175 + STOP 0x0000000000000176 + REC 0x0000000000000177 + SKIP 0x0000000000000178 + +100 0x0000000000000179 + LAST 0x000000000000017b + GUIDE 0x000000000000017c + TV/VIDEO 0x000000000000017e + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs new file mode 100644 index 0000000..91c0de5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs @@ -0,0 +1,539 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the RadioShack 15-2116, VCR type 0081 +# using Hauppauge IR receiver +# +# By Jarod Wilson, 2003/12/31 +# Amalgamated from Harry O's +# .lircrc, the mythtv.org docs, and +# a few touches of my own. :) +# + +# Channel Up +begin +prog = mythtv +button = CH+ +repeat = 4 +config = Up +end + +# Channel Down +begin +prog = mythtv +button = CH- +repeat = 4 +config = Down +end + +# OK/Select +begin +prog = mythtv +button = SELECT +repeat = 4 +config = Return +end + +# Play +begin +prog = mythtv +button = PLAY +repeat = 4 +config = Space +end + +# Stop +begin +prog = mythtv +button = STOP +repeat = 4 +config = Esc +end + +# Escape/Exit/Back +begin +prog = mythtv +button = EXIT +repeat = 4 +config = Esc +end + +# Power Off/Exit +begin +prog = mythtv +button = POWER +repeat = 4 +config = Esc +end + +# Pause +begin +prog = mythtv +button = PAUSE +repeat = 4 +config = P +end + +# Mute +begin +prog = mythtv +button = MUTE +repeat = 4 +config = | +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = REW +repeat = 4 +config = Left +end + +begin +prog = mythtv +button = LEFT +repeat = 4 +config = Left +end + +# Fast forward (30 sec default) +begin +prog = mythtv +button = FFWD +repeat = 4 +config = Right +end + +begin +prog = mythtv +button = RIGHT +repeat = 4 +config = Right +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = FREEZE +repeat = 4 +config = PgDown +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = MOVE +repeat = 4 +config = PgUp +end + +# Record +begin +prog = mythtv +button = REC +repeat = 4 +config = R +end + +# OSD browse +begin +prog = mythtv +button = GUIDE +repeat = 4 +config = O +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = MENU +repeat = 4 +config = M +end + +# Bring up OSD info +begin +prog = mythtv +button = INFO +repeat = 4 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = +100 +repeat = 4 +config = W +end + +# Seek to previous commercial cut point +begin +prog = mythtv +button = SLEEP +repeat = 4 +config = Q +end + +# Seek to next commercial cut point +begin +prog = mythtv +button = ENTER +repeat = 4 +config = Z +end + +# Change TV card input +begin +prog = mythtv +button = TV/VIDEO +repeat = 4 +config = C +end + +# Toggle Picture-In-Picture +begin +prog = mythtv +button = PIP +repeat = 4 +config = V +end + +# Swap PIP +begin +prog = mythtv +button = SWAP +repeat = 4 +config = N +end + +# Cycle through channel history +begin +prog = mythtv +button = LAST +repeat = 4 +config = H +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +repeat = 4 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 4 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 4 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 4 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 4 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 4 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 4 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 4 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 4 +config = 9 +end + +### MPlayer commands + +begin +prog = mplayer +button = MENU +repeat = 4 +config = osd +end + +begin +prog = mplayer +button = PAUSE +repeat = 4 +config = pause +end + +begin +prog = mplayer +button = PLAY +repeat = 4 +config = seek +1 +end + +begin +prog = mplayer +button = STOP +repeat = 4 +config = quit +end + +begin +prog = mplayer +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = mplayer +button = REW +repeat = 4 +config = seek -10 +end + +begin +prog = mplayer +button = LEFT +repeat = 4 +config = seek -10 +end + +begin +prog = mplayer +button = FFWD +repeat = 4 +config = seek +30 +end + +begin +prog = mplayer +button = RIGHT +repeat = 4 +config = seek +30 +end + +begin +prog = mplayer +button = EXIT +repeat = 4 +config = quit +end + +begin +prog = mplayer +button = FREEZE +repeat = 4 +config = seek +1200 +end + +begin +prog = mplayer +button = MOVE +repeat = 4 +config = seek -1200 +end + +begin +prog = mplayer +button = +100 +repeat = 4 +config = vo_fullscreen +end + +### Xine commands + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = POWER +repeat = 3 +config = Quit +end + +begin +prog = xine +button = EXIT +repeat = 3 +config = Quit +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = CH+ +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = CH- +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = LEFT +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = RIGHT +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = SELECT +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = GUIDE +repeat = 3 +config = Menu +end + +begin +prog = xine +button = FFWD +repeat = 3 +config = SeekRelative+30 +end + +begin +prog = xine +button = REW +repeat = 3 +config = SeekRelative-30 +end + +begin +prog = xine +button = VOL+ +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VOL- +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = FREEZE +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = LAST +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = INFO +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = ENTER +repeat = 3 +config = SpeedFaster +end + +begin +prog = xine +button = SLEEP +repeat = 3 +config = SpeedSlower +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg new file mode 100644 index 0000000..d465839 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 new file mode 100644 index 0000000..3f6c5f0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/adaptec/lircd.conf.AVC-2410 @@ -0,0 +1,62 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005 +# +# contributed by +# +# brand: Adaptec +# model no. of remote control: +# devices being controlled by this remote: AVC-2410 capture card +# + +begin remote + + name AVC-2410 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x82F1 + gap 202922 + min_repeat 0 + toggle_bit 0 + + + begin codes + Live 0x00000000000025DA + Timeshift 0x00000000000017E8 + Scan 0x00000000000018e7 + Power 0x00000000000009f6 + 1 0x00000000000026D9 + 2 0x00000000000019E6 + 3 0x00000000000010EF + 4 0x00000000000027D8 + 5 0x00000000000020DF + 6 0x00000000000011EE + 7 0x00000000000028D7 + 8 0x00000000000021DE + 9 0x00000000000012ED + 0 0x00000000000022DD + Mute 0x00000000000013EC + Full 0x00000000000029D6 + Play 0x00000000000030CF + Stop 0x00000000000023DC + Skip 0x00000000000024DB + Replay 0x00000000000014EB + Rewind 0x00000000000031CE + Forward 0x00000000000015EA + Ch+ 0x00000000000001FE + Ch- 0x00000000000005FA + Vol+ 0x00000000000004FB + Vol- 0x00000000000002FD + Enter 0x00000000000003FC + OSD 0x00000000000032CD + cc 0x00000000000016E9 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax new file mode 100644 index 0000000..06a4102 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircd.conf.animax @@ -0,0 +1,199 @@ + +# +# This is a space encoded remote control from AnimaX. +# You need at least lirc-0.5.4 to use this config file +# +# contributed by Karsten Scheibler +# +# brand: AnimaX +# model: Anir Remote Control +# supported devices: This remote control comes with some TV Tuner cards from +# Hauppauge. +# + +begin remote + + name ANIMAX + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 2500 2500 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_gap 102937 + repeat_bit 0 + + begin codes + CD_DOWN 0x000000000000DB24 + CD_UP 0x0000000000005BA4 + TV_DOWN 0x000000000000DC23 + TV_UP 0x0000000000005CA3 + PHONE_DOWN 0x000000000000DD22 + PHONE_UP 0x0000000000005DA2 + RADIO_DOWN 0x000000000000DE21 + RADIO_UP 0x0000000000005EA1 + VIDEO_DOWN 0x000000000000DF20 + VIDEO_UP 0x0000000000005FA0 + AUX1_DOWN 0x000000000000E01F + AUX1_UP 0x000000000000609F + MAIL_DOWN 0x000000000000E11E + MAIL_UP 0x000000000000619E + AUX2_DOWN 0x000000000000E21D + AUX2_UP 0x000000000000629D + POWER_DOWN 0x000000000000E31C + POWER_UP 0x000000000000639C + LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B + LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B + REWIND_DOWN 0x000000000000E51A + REWIND_UP 0x000000000000659A + PLAY_DOWN 0x000000000000E619 + PLAY_UP 0x0000000000006699 + FORWARD_DOWN 0x000000000000E718 + FORWARD_UP 0x0000000000006798 + SKIP_BACKWARD_DOWN 0x000000000000E817 + SKIP_BACKWARD 0x0000000000006897 + STOP_DOWN 0x000000000000E916 + STOP_UP 0x0000000000006996 + SKIP_FORWARD_DOWN 0x000000000000EA15 + SKIP_FORWARD_UP 0x0000000000006A95 + CHANNEL_UP_DOWN 0x000000000000EB14 + CHANNEL_UP_UP 0x0000000000006B94 + MENU_DOWN 0x000000000000EC13 + MENU_UP 0x0000000000006C93 + VOLUME_UP_DOWN 0x000000000000ED12 + VOLUME_UP_UP 0x0000000000006D92 + BLUE_BUTTON_DOWN 0x000000000000EE11 + BLUE_BUTTON_UP 0x0000000000006E91 + MUTE_DOWN 0x000000000000EF10 + MUTE_UP 0x0000000000006F90 + VOLUME_DOWN_DOWN 0x000000000000F00F + VOLUME_DOWN_UP 0x000000000000708F + RED_BUTTON_DOWN 0x000000000000F10E + RED_BUTTON_UP 0x000000000000718E + GREEN_BUTTON_DOWN 0x000000000000F20D + GREEN_BUTTON_UP 0x000000000000728D + CHANNEL_DOWN_DOWN 0x000000000000F30C + CHANNEL_DOWN_UP 0x000000000000738C + 1_DOWN 0x000000000000F40B + 1_UP 0x000000000000748B + 2_DOWN 0x000000000000F50A + 2_UP 0x000000000000758A + 3_DOWN 0x000000000000F609 + 3_UP 0x0000000000007689 + 4_DOWN 0x000000000000F708 + 4_UP 0x0000000000007788 + 5_DOWN 0x000000000000F807 + 5_UP 0x0000000000007887 + 6_DOWN 0x000000000000F906 + 6_UP 0x0000000000007986 + 7_DOWN 0x000000000000FA05 + 7_UP 0x0000000000007A85 + 8_DOWN 0x000000000000FB04 + 8_UP 0x0000000000007B84 + 9_DOWN 0x000000000000FC03 + 9_UP 0x0000000000007C83 + SLASH_DOWN 0x000000000000FD02 + SLASH_UP 0x0000000000007D82 + 0_DOWN 0x000000000000FE01 + 0_UP 0x0000000000007E81 + MINUS_DOWN 0x000000000000FF00 + MINUS_UP 0x0000000000007F80 + end codes + +end remote + + +begin remote + + name ANIMAX_MOUSE_BUTTONS + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 0 0 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_bit 0 + + begin codes + RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639 + RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9 + LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31 + LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1 + end codes + +end remote + + +begin remote + + name ANIMAX_MOUSE_PAD + bits 16 + flags SPACE_ENC|REVERSE + eps 20 + aeps 0 + + header 4500 4500 + one 562 1682 + zero 562 562 + ptrail 562 + plead 0 + foot 0 0 + repeat 2500 2500 + pre_data_bits 8 + pre_data 0xF0 + post_data_bits 0 + post_data 0x0 + pre 0 0 + post 0 0 + gap 12937 + repeat_gap 8437 + repeat_bit 0 + + begin codes + MOUSE_NNW 0x000000000000906F + MOUSE_NW 0x000000000000D02F + MOUSE_NWW 0x000000000000916E + MOUSE_W 0x000000000000D12E + MOUSE_SWW 0x000000000000926D + MOUSE_SW 0x000000000000D22D + MOUSE_SSW 0x000000000000936C + MOUSE_S 0x000000000000D32C + MOUSE_SSE 0x000000000000946B + MOUSE_SE 0x000000000000D42B + MOUSE_SEE 0x000000000000956A + MOUSE_E 0x000000000000D52A + MOUSE_NEE 0x0000000000009669 + MOUSE_NE 0x000000000000D629 + MOUSE_NNE 0x0000000000009768 + MOUSE_N 0x000000000000D728 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax new file mode 100644 index 0000000..09a2341 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/animax/lircmd.conf.animax @@ -0,0 +1,71 @@ +# +# lircmd config file for the animax remote control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_N +MOVE_N ANIMAX_MOUSE_PAD MOUSE_N + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE + +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE +MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_E +MOVE_E ANIMAX_MOUSE_PAD MOUSE_E + +MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE + +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE +MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_S +MOVE_S ANIMAX_MOUSE_PAD MOUSE_S + +MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW + +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW +MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_W +MOVE_W ANIMAX_MOUSE_PAD MOUSE_W + +MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW + +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW + +MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW +MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW + + + +BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN + +BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN +BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN + +BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP +BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/animax/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus new file mode 100644 index 0000000..ceadbf0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.asus @@ -0,0 +1,56 @@ +# +# contributed by Tibor Sipos and +# Stefan Jahn +# +# brand: Asus +# model: Asus TV-Box Remote Control +# + +begin remote + + name Asus TV-Box IR + + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 1399999 + toggle_bit 0 + + begin codes + 0 0x0000000000000000 + 1 0x0000000000000008 + 2 0x0000000000000010 + 3 0x0000000000000018 + 4 0x0000000000000020 + 5 0x0000000000000028 + 6 0x0000000000000030 + 7 0x0000000000000038 + 8 0x0000000000000040 + 9 0x0000000000000048 + PREV 0x0000000000000050 + ENTER 0x0000000000000058 + CH+ 0x0000000000000060 + CH- 0x0000000000000068 + VOL+ 0x0000000000000070 + VOL- 0x0000000000000078 + MAXIMIZE 0x0000000000000080 + MUTE 0x0000000000000088 + POWER 0x0000000000000090 + MENU 0x0000000000000098 + UP 0x00000000000000A0 + DOWN 0x00000000000000A8 + LEFT 0x00000000000000B0 + RIGHT 0x00000000000000B8 + CAPTION 0x00000000000000C0 + MTS/SAP 0x00000000000000C8 + DISPLAY 0x00000000000000D0 + SCAN 0x00000000000000D8 + RED 0x00000000000000E0 + GREEN 0x00000000000000E8 + YELLOW 0x00000000000000F0 + BLUE 0x00000000000000F8 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix new file mode 100644 index 0000000..a6e9abd --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/asus/lircd.conf.digimatrix @@ -0,0 +1,152 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004 +# +# contributed by +# +# brand: ASUS +# model no. of remote control: DigiMatrix +# devices being controlled by this remote: +# + +begin remote + + name ASUS_DigiMatrix + bits 16 + flags SPACE_ENC + eps 30 + aeps 100 + + header 8057 4071 + one 479 1534 + zero 479 531 + ptrail 491 + pre_data_bits 8 + pre_data 0x35 + gap 25647 + toggle_bit 0 + + + begin codes + up 0x000000000000E817 + down 0x00000000000018E7 + enter 0x000000000000D02F + left 0x0000000000009867 + right 0x00000000000058A7 + 1 0x00000000000000FF + 2 0x000000000000807F + 3 0x00000000000040BF + 4 0x000000000000C03F + 5 0x00000000000020DF + 6 0x000000000000A05F + 7 0x000000000000609F + 8 0x000000000000E01F + 9 0x00000000000010EF + 0 0x000000000000906F + on_off 0x000000000000B04F + dvd_vcd 0x000000000000F00F + tv 0x00000000000008F7 + os_start 0x00000000000030CF + photo 0x00000000000048B7 + home 0x00000000000044BB + back 0x000000000000A857 + ch+ 0x000000000000B847 + stop 0x000000000000946B + play 0x000000000000C43B + vol+ 0x000000000000F807 + ch- 0x0000000000007887 + step- 0x000000000000E41B + step+ 0x000000000000649B + vol- 0x00000000000004FB + pause 0x00000000000024DB + pre 0x00000000000014EB + next 0x000000000000A45B + mute 0x000000000000847B + rec 0x000000000000D42B + subtitle 0x000000000000C837 + menu 0x00000000000038C7 + dvd_audio 0x00000000000050AF + ui_size 0x0000000000008877 + ui_on_off 0x00000000000028D7 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005 +# +# contributed by +# +# brand: ASUS +# model no. of remote control: DigiMatrix Mark 2 +# devices being controlled by this remote: +# + +begin remote + + name ASUS_DigiMatrixMk2 + bits 8 + flags SPACE_ENC + eps 30 + aeps 100 + + header 2666 1378 + one 260 741 + zero 260 279 + ptrail 251 + pre_data_bits 1 + pre_data 0x0 + post_data_bits 8 + post_data 0x3 + gap 10826 + min_repeat 1 + toggle_bit 0 + + + begin codes + power 0x0000000000000084 + tv_dvr 0x0000000000000044 + fm 0x00000000000000C4 + os_start 0x0000000000000024 + music 0x00000000000000A4 + pictures 0x0000000000000064 + video 0x00000000000000E4 + dvd_menu 0x0000000000000014 + up 0x000000000000004C + down 0x00000000000000E0 + left 0x0000000000000010 + right 0x0000000000000040 + back 0x00000000000000B4 + ok 0x0000000000000088 + back_fwd 0x0000000000000074 + rew 0x0000000000000094 + play_pause 0x0000000000000054 + fwd 0x00000000000000D4 + step- 0x0000000000000098 + stop 0x0000000000000048 + step+ 0x0000000000000090 + vol+ 0x0000000000000058 + vol- 0x00000000000000D8 + home 0x00000000000000C8 + ch+ 0x0000000000000050 + ch- 0x00000000000000D0 + mute 0x0000000000000038 + rec 0x0000000000000028 + pc 0x0000000000000030 + 1 0x00000000000000B8 + 2 0x00000000000000A8 + 3 0x00000000000000B0 + 4 0x0000000000000078 + 5 0x0000000000000068 + 6 0x0000000000000070 + 7 0x00000000000000F8 + 8 0x00000000000000E8 + 9 0x00000000000000F0 + 0 0x0000000000000018 + ui_size 0x0000000000000004 + repeat 0x0000000000000008 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb new file mode 100644 index 0000000..4953bf2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/atiusb/lircd.conf.atiusb @@ -0,0 +1,1259 @@ +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 +# +# contributed by Paul Miller +# +# brand: ATI Remote Wonder +# model no. of remote control: 5000015900A +# devices being controlled by this remote: ATI USB Receiver +# +# CHANNEL CODES +# To change your channel, hold the hand button down until the +# LED begins to blink. Then enter the channel number +# (1 through 16) and press the hand again. +# +# NOTE!! The lirc_atiusb driver now removes the channel code +# from key-codes (by default). This effectively outputs codes +# for remote channel 1. You can change this behavior by +# loading the module with unique=1. Type `modinfo lirc_atiusb` +# for details. + +begin remote + + name ATIUSB_5000015900A + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 139944 + toggle_bit 0 + + + begin codes + A 0x000000000000F500 + B 0x000000000000F601 + C 0x0000000000000E19 + D 0x000000000000101B + E 0x0000000000001621 + F 0x0000000000001823 + TV 0x000000000000F803 + DVD 0x000000000000F904 + WEB 0x000000000000FA05 + BOOK 0x000000000000FB06 + HAND 0x000000000000FC07 + POWER 0x000000000000F702 + MOUSE_LEFT_BTN 0x0000000000006D78 + MOUSE_RIGHT_BTN 0x000000000000717C + MOUSE_UP 0x0000000000006772 + MOUSE_DOWN 0x0000000000006B76 + MOUSE_LEFT 0x0000000000006C77 + MOUSE_RIGHT 0x0000000000006B76 + VOL_UP 0x000000000000FD08 + VOL_DOWN 0x000000000000FE09 + MUTE 0x000000000000FF0A + CH_UP 0x000000000000000B + CH_DOWN 0x000000000000010C + 1 0x000000000000020D + 2 0x000000000000030E + 3 0x000000000000040F + 4 0x0000000000000510 + 5 0x0000000000000611 + 6 0x0000000000000712 + 7 0x0000000000000813 + 8 0x0000000000000914 + 9 0x0000000000000A15 + 0 0x0000000000000C17 + LIST 0x0000000000000B16 + CHECK 0x0000000000000D18 + UP 0x0000000000000F1A + DOWN 0x0000000000001722 + LEFT 0x000000000000121D + RIGHT 0x000000000000141F + OK 0x000000000000131E + TIMER 0x000000000000111C + MAX 0x0000000000001520 + REWIND 0x0000000000001924 + PLAY 0x0000000000001A25 + FFWD 0x0000000000001B26 + REC 0x0000000000001C27 + STOP 0x0000000000001D28 + PAUSE 0x0000000000001E29 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 +# +# contributed by Jason Piterak +# +# brand: ATI +# model no. of remote control: 5000022000 +# +# devices being controlled by this remote: +# MythTV PVR using knopmyth by Cecil and Dale at +# http://mysettopbox.tv +# Key map names are as per ATI's website: +# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html +# Feel free to change them as you see fit :-) +# +# NOTE: There are 16 channels for this remote; this file only +# supports one channel. See the GATOS project for information +# on how to change the channel. Not tested. Unknown channel. +# +# also reported by Jeffrey Barnhill to work with model 5000023600 while +# the dedicated section below did not work + +begin remote + + name ATIUSB_5000022000 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0000 + gap 139891 + toggle_bit 0 + + + begin codes + a 0x000000000000C500 + b 0x000000000000C601 + power 0x000000000000C702 + tv 0x000000000000C803 + dvd 0x000000000000C904 + web 0x000000000000CA05 + media_library 0x000000000000CB06 + drag 0x000000000000CC07 + mouse-button_left 0x0000000000003D78 + mouse-button_right 0x000000000000417C + mouse-up 0x0000000000003772 + mouse-down 0x0000000000003873 + mouse-left 0x0000000000003570 + mouse-right 0x0000000000003671 + mouse-left_up 0x0000000000003974 + mouse-right_up 0x0000000000003A75 + mouse-left_down 0x0000000000003C77 + mouse-right_down 0x0000000000003B76 + vol-up 0x000000000000CD08 + vol-down 0x000000000000CE09 + mute 0x000000000000CF0A + chan-up 0x000000000000D00B + chan-down 0x000000000000D10C + 1 0x000000000000D20D + 2 0x000000000000D30E + 3 0x000000000000D40F + 4 0x000000000000D510 + 5 0x000000000000D611 + 6 0x000000000000D712 + 7 0x000000000000D813 + 8 0x000000000000D914 + 9 0x000000000000DA15 + 0 0x000000000000DC17 + dvd-root_menu 0x000000000000DB16 + launch_setup 0x000000000000DD18 + c 0x000000000000DE19 + d 0x000000000000E01B + tv_on_demand 0x000000000000E11C + max_window 0x000000000000E520 + cursor-up 0x000000000000DF1A + cursor-down 0x000000000000E722 + cursor-left 0x000000000000E21D + cursor-right 0x000000000000E41F + ok 0x000000000000E31E + e 0x000000000000E621 + f 0x000000000000E823 + rewind 0x000000000000E924 + play 0x000000000000EA25 + fast_forward 0x000000000000EB26 + record 0x000000000000EC27 + stop 0x000000000000ED28 + pause 0x000000000000EE29 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 +# +# contributed by Jurgen Kramer +# +# brand: ATI +# model no. of remote control: 5000023600 +# devices being controlled by this remote: MythTV 0.14 +# +# USB ID: 0bc7:0004 +# + +begin remote + + name ATIUSB_5000023600 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227972 + min_repeat 4 + toggle_bit 0 + + + begin codes + 1 0x000000000000920D + 2 0x000000000000930E + 3 0x000000000000940F + 4 0x0000000000009510 + 5 0x0000000000009611 + 6 0x0000000000009712 + 7 0x0000000000009813 + 8 0x0000000000009914 + 9 0x0000000000009A15 + a 0x0000000000008500 + b 0x0000000000008601 + power 0x0000000000008702 + tv 0x0000000000008803 + dvd 0x0000000000008904 + web 0x0000000000008A05 + media_library 0x0000000000008B06 + drag 0x0000000000008C07 + 0 0x0000000000009C17 + c 0x0000000000009E19 + d 0x000000000000A01B + mute 0x0000000000008F0A + tv_on_demand 0x000000000000A11C + max_window 0x000000000000A520 + e 0x000000000000A621 + f 0x000000000000A823 + ok 0x000000000000A31E + left 0x000000000000A21D + right 0x000000000000A41F + up 0x0000000000009F1A + down 0x000000000000A722 + rewind 0x000000000000A924 + play 0x000000000000AA25 + forward 0x000000000000AB26 + record 0x000000000000AC27 + stop 0x000000000000AD28 + pause 0x000000000000AE29 + mouse_button_left 0x000000000000FD78 + mouse_button_right 0x000000000000017C + vol-down 0x0000000000008E09 + vol-up 0x0000000000008D08 + chan-down 0x000000000000910C + chan-up 0x000000000000900B + mouse-up 0x000000000000F772 + mouse-down 0x000000000000F873 + mouse-left 0x000000000000F570 + mouse-right 0x000000000000F671 + mouse-left_up 0x000000000000F974 + mouse-left_down 0x000000000000FC77 + mouse-right_up 0x000000000000FA75 + mouse-right_down 0x000000000000FB76 + dvd-root_menu 0x0000000000009B16 + launch_setup 0x0000000000009D18 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 +# +# contributed by Raphaël Doursenaud (rdoursenaud@free.fr) +# +# brand: Sapphire (ATI) +# model no. of remote control: 5000023600 +# devices being controlled by this remote: xmms, tvtime +# + +begin remote + + name SAPPHIRE_ATIUSB_5000023600 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 227990 + toggle_bit 0 + + + begin codes + 1 0x00000014E20D0000 + 2 0x00000014E30E0000 + 3 0x00000014E40F0000 + 4 0x00000014E5100000 + 5 0x00000014E6110000 + 6 0x00000014E7120000 + 7 0x00000014E8130000 + 8 0x00000014E9140000 + 9 0x00000014EA150000 + a 0x00000014D5000000 + b 0x00000014D6010000 + power 0x00000014D7020000 + tv 0x00000014D8030000 + dvd 0x00000014D9040000 + web 0x00000014DA050000 + media_library 0x00000014DB060000 + drag 0x00000014DC070000 + 0 0x00000014EC170000 + c 0x00000014EE190000 + d 0x00000014F01B0000 + mute 0x00000014DF0A0000 + tv_on_demand 0x00000014F11C0000 + max_window 0x00000014F5200000 + e 0x00000014F6210000 + f 0x00000014F8230000 + ok 0x00000014F31E0000 + left 0x00000014F21D0000 + right 0x00000014F41F0000 + up 0x00000014EF1A0000 + down 0x00000014F7220000 + rewind 0x00000014F9240000 + play 0x00000014FA250000 + forward 0x00000014FB260000 + record 0x00000014FC270000 + stop 0x00000014FD280000 + pause 0x00000014FE290000 + mouse_button_left 0x000000144D780000 + mouse_button_right 0x00000014517C0000 + vol-down 0x00000014DE090000 + vol-up 0x00000014DD080000 + chan-down 0x00000014E10C0000 + chan-up 0x00000014E00B0000 + mouse-up 0x0000001447720000 + mouse-down 0x0000001448730000 + mouse-left 0x0000001445700000 + mouse-right 0x0000001446710000 + mouse-left_up 0x0000001449740000 + mouse-left_down 0x000000144C770000 + mouse-right_up 0x000000144A750000 + mouse-right_down 0x000000144B760000 + dvd-root_menu 0x00000014EB160000 + launch_setup 0x00000014ED180000 + end codes + +end remote + + +# lircd.conf for X-10 Lola remote +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 +# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc +# +# +# brand: X-10 Lola +# model no. of remote control: UR89A +# devices being controlled by this remote: mythtv +# + +begin remote + + name X-10_Lola + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 219972 + toggle_bit 0 + + + begin codes + up 0x000000000000600B + down 0x000000000000610C + left 0x0000000000005D08 + right 0x0000000000005E09 + M 0x0000000000005F0A + 1 0x000000000000620D + 2 0x000000000000630E + 3 0x000000000000640F + 4 0x0000000000006510 + 5 0x0000000000006611 + 6 0x0000000000006712 + 7 0x0000000000006813 + 8 0x0000000000006914 + 9 0x0000000000006A15 + 0 0x0000000000006C17 + a-d 0x0000000000006B16 + a-b 0x0000000000006D18 + pageup 0x000000000000711C + pagedown 0x0000000000007520 + T 0x000000000000832E + E 0x000000000000842F + F 0x0000000000005C07 + S 0x0000000000008530 + scan- 0x000000000000802B + rew 0x0000000000007924 + play 0x0000000000007A25 + ff 0x0000000000007B26 + scan+ 0x0000000000007F2A + rec 0x0000000000007C27 + stop 0x0000000000007D28 + pause 0x0000000000007E29 + playlist 0x0000000000005601 + playing 0x000000000000822D + enter 0x000000000000731E + eu 0x0000000000006F1A + ed 0x0000000000007722 + el 0x000000000000721D + er 0x000000000000741F + alb 0x0000000000006E19 + art 0x000000000000701B + gen 0x0000000000007621 + trk 0x0000000000007823 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 +# +# contributed by Julien Damon +# +# brand: microapp6in1 +# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 +# distributed in France +# model no. of remote control: 4184(UR86E) +# devices being controlled by this remote: + +# +# sold by Pearl as Q-Sonic Master Remote 6in1 PC +# + +begin remote + + name microapp6in1 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 203993 + toggle_bit 0 + + + begin codes + num_1 0x00000020EE11820D + num_2 0x00000020EE11420D + num_3 0x00000020EE11C20D + num_4 0x00000020EE11220D + num_5 0x00000020EE11A20D + num_6 0x00000020EE11620D + num_7 0x00000020EE11E20D + num_8 0x00000020EE11120D + num_9 0x00000020EE11920D + num_0 0x00000020EE11020D + AV 0x00000020EE11BA05 + ok 0x00000020EE11520D + up 0x00000020EE11D50A + left 0x00000020EE11D20D + right 0x00000020EE11D10E + down 0x00000020EE11D30C + exit 0x00000020EE11C906 + menu 0x00000020EE11B609 + mute 0x00000020EE11A00F + vol+ 0x00000020EE11600F + vol- 0x00000020EE11E00F + ch+ 0x00000020EE11400F + ch- 0x00000020EE11C00F + hand 0x00000014307B0000 + skip_left 0x00000020EE113A05 + skip_right 0x00000020EE11D807 + play 0x00000020EE11B00F + backward 0x00000020EE113807 + forward 0x00000020EE11B807 + pause 0x00000020EE11720D + stop 0x00000020EE11FF00 + record 0x00000020EE11700F + clic_left 0x000000142D780000 + clic_right 0x00000014317C0000 + mouse_up 0x0000001427720000 + mouse_down 0x0000001428730000 + mouse_right 0x0000001426710000 + mouse_left 0x0000001425700000 + mouse_up_right 0x000000142A750000 + mouse_down_right 0x000000142B760000 + mouse_up_left 0x0000001429740000 + mouse_down_left 0x000000142C770000 + power 0x00000020EE11F00F +# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC + leftbtn_up 0x000000142e790000 + rightbtn_up 0x00000014327d0000 + pc 0x00000020ee11d40b + + end codes + +end remote + + +# this config file was automatically generated +# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 +# +# contributed by Martin Tomasek +# +# brand: ATI Remote Wonder +# model no. of remote control: +# devices being controlled by this remote: ATI USB Receiver (X10). +# +# * remote is set to channel 1, driver reports channel 16. don't know +# which is true. + +# +# P: Vendor=0bc7 ProdID=0004 Rev= 1.00 +# S: Manufacturer=X10 Wireless Technology Inc +# S: Product=USB Receiver +# + +begin remote + + name atiusb_ch1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 227933 + toggle_bit 0 + + + begin codes + A 0x000000000000D500 + B 0x000000000000D601 + C 0x000000000000EE19 + D 0x000000000000F01B + E 0x000000000000F621 + F 0x000000000000F823 + POWER 0x000000000000D702 + TV 0x000000000000D803 + DVD 0x000000000000D904 + WEB 0x000000000000DA05 + BOOK 0x000000000000DB06 + HAND 0x000000000000DC07 + MOUSE_LEFT_BTN 0x0000000000004D78 + MOUSE_RIGHT_BTN 0x000000000000517C + MOUSE_LEFT 0x0000000000004570 + MOUSE_RIGHT 0x0000000000004671 + MOUSE_UP 0x0000000000004772 + MOUSE_DOWN 0x0000000000004873 + VOL_UP 0x000000000000DD08 + VOL_DOWN 0x000000000000DE09 + MUTE 0x000000000000DF0A + CH_UP 0x000000000000E00B + CH_DOWN 0x000000000000E10C + 1 0x000000000000E20D + 2 0x000000000000E30E + 3 0x000000000000E40F + 4 0x000000000000E510 + 5 0x000000000000E611 + 6 0x000000000000E712 + 7 0x000000000000E813 + 8 0x000000000000E914 + 9 0x000000000000EA15 + 0 0x000000000000EC17 + LIST 0x000000000000EB16 + CHECK 0x000000000000ED18 + UP 0x000000000000EF1A + DOWN 0x000000000000F722 + LEFT 0x000000000000F21D + RIGHT 0x000000000000F41F + OK 0x000000000000F31E + TIMER 0x000000000000F11C + MAXIMIZE 0x000000000000F520 + REW 0x000000000000F924 + FFWD 0x000000000000FB26 + PLAY 0x000000000000FA25 + STOP 0x000000000000FD28 + RECORD 0x000000000000FC27 + PAUSE 0x000000000000FE29 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 +# +# contributed by Phil Speights +# +# brand: nvidia +# model no. of remote control: UR88A +# devices being controlled by this remote: nvidia personal cinema +# + +begin remote + + name ATIUSB_UR88A + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 243948 + toggle_bit 0 + + + begin codes + mouse-up 0x4A75 + mouse-right_up 0x4A75 + mouse-right 0x4671 + mouse-right_down 0x4B76 + mouse-down 0x4B76 + mouse-left_down 0x4873 + mouse-left 0x4C77 + mouse-left_up 0x4772 + esc 0xDF0A + mouse-button_left 0x4D78 + mouse-button_right 0x517C + 1 0xE20D + 2 0xE30E + 3 0xE40F + 4 0xE510 + 5 0xE611 + 6 0xE712 + 7 0xE813 + 8 0xE914 + 9 0xEA15 + 0 0xEC17 + stop 0xFD28 + play 0xFA25 + fastfoward 0xFB26 + rewind 0xF924 + pause 0xFE29 + record 0xFC27 + previous 0xF621 + next 0xF823 + up 0xEF1A + down 0xF722 + right 0xF41F + left 0xF21D + web 0xDC07 + music 0xDB06 + photo 0xDA05 + dvd/vcd 0xD904 + dvr 0xD803 + mute 0xD500 + playlist 0xD601 + chsurf 0xD702 + dvdmenu 0xEE19 + txt 0xEB16 + snapshots 0xED18 + setup 0xF01B + audio 0xF11C + slow 0xF520 + ok 0xF31E + vol+ 0xDE09 + vol- 0xDD08 + chan- 0xE10C + chan+ 0xE00B + zoom 0xFF2A + angle 0x002B + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 +# +# contributed by Dirk Aust +# +# brand: Medion, Made by X10, China +# Remote P/N: 20016398 +# Receiver P/N: 20016397 +# +# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC + +begin remote + + name Medion + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 139873 + toggle_bit 0 + + + begin codes + TV 0x012C + VCR 0x022D + DVD 0xD904 + MUSIC 0xDB06 + RADIO 0x032E + PHOTO 0xDA05 + TV_PREVIEW 0x042F + CHANNEL_LIST 0x0530 + SETUP 0xF01B + VIDEO_DESKTOP 0x0631 + CHAN+ 0xE00B + VOL- 0xDD08 + MUTE 0xD500 + VOL+ 0xDE09 + CHAN- 0xE10C + RED 0x0732 + GREEN 0x0833 + YELLOW 0x0934 + BLUE 0x0A35 + TXT 0xEB16 + 1 0xE20D + 2 0xE30E + 3 0xE40F + 4 0xE510 + 5 0xE611 + 6 0xE712 + 7 0xE813 + 8 0xE914 + 9 0xEA15 + TV/RADIO 0xF11C + 0 0xEC17 + DELETE 0xF520 + RENAME 0x0B36 + SNAPSHOT 0xED18 + UP 0xEF1A + LEFT 0xF21D + OK 0xF31E + RIGHT 0xF41F + DOWN 0xF722 + ACQ_IMAGE 0x0C37 + EDIT_IMAGE 0x0D38 + REW 0xF924 + PLAY 0xFA25 + FFW 0xFB26 + RECORD 0xFC27 + STOP 0xFD28 + PAUSE 0xFE29 + PREV 0xF621 + FULL 0x0E39 + NEXT 0xF823 + DVD_MENU 0xEE19 + DVD_AUDIO 0x0F3A + POWER 0xD702 + end codes + +end remote + + +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 +# +# contributed by Steffen +# +# brand: ATI Sapphire Remote Bob II USB +# model no. of remote control: 5000024400 +# devices being controlled by this remote: ASUS Digimatrix MythTV PVR +# + +begin remote + + name 5000024400 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x0 + post_data_bits 16 + post_data 0x0 + gap 299851 + toggle_bit 0 + + + begin codes + aux1 0x023F + aux2 0x023F + aux3 0x023F + aux4 0x023F + leftmouse 0x02A9 + rightmouse 0x02AA + a 0x0278 + b 0x0279 + power 0x020C + dvd 0x0238 + tv 0x0239 + help 0x02BE + pc 0x023F + resize 0x02D5 + hand 0x02D0 + ati 0x028E + vol-up 0x0210 + vol-down 0x0211 + mute 0x020D + chan-up 0x0220 + chan-down 0x0221 + mouse-up 0x013F + mouse-down 0x013F + mouse-left 0x013F + mouse-right 0x013F + 1 0x0201 + 2 0x0202 + 3 0x0203 + 4 0x0204 + 5 0x0205 + 6 0x0206 + 7 0x0207 + 8 0x0208 + 9 0x0209 + 0 0x0200 + list 0x0254 + check 0x0282 + info 0x02F9 + timer 0x0296 + up 0x0258 + left 0x025A + right 0x025B + down 0x0259 + ok 0x025C + c 0x017A + d 0x027B + play 0x022C + e 0x027C + f 0x027D + rewind 0x0229 + rec 0x0237 + stop 0x0231 + pause 0x0230 + ffwd 0x0228 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 +# +# contributed by +# +# brand: Niveus +# model no. of remote control: +# devices being controlled by this remote: Niveus X10 +# + +begin remote + + name Niveus_X10 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 203974 + toggle_bit 0 + + + begin codes + power 0x00000020EE11F00F + mouse-up 0x0000001447720000 + mouse-down 0x0000001448730000 + mouse-left 0x0000001445700000 + mouse-right 0x0000001446710000 + mouse-up-left 0x0000001449740000 + mouse-up-right 0x000000144A750000 + mouse-down-left 0x000000144C770000 + mouse-down-right 0x000000144B760000 + mouse-left-click 0x000000144D780000 + mouse-right-click 0x00000014517C0000 + mouse-drag 0x00000014507B0000 + vol- 0x00000020EE01E00F + vol+ 0x00000020EE81600F + ch- 0x00000020EEE1C00F + ch+ 0x00000020EE61400F + mute 0x00000020EEC1A00F + 1 0x00000020EEA1820D + 2 0x00000020EE61420D + 3 0x00000020EEE1C20D + 4 0x00000020EE41220D + 5 0x00000020EEC1A20D + 6 0x00000020EE81620D + 7 0x00000020EE01E20D + 8 0x00000020EE31120D + 9 0x00000020EEB1920D + ent 0x00000020EE71520D + 0 0x00000020EE21020D + a-b 0x00000020EED1BA05 + a 0x00000020EE513A05 + b 0x00000020EEF1D807 + c 0x00000020EEF1D609 + d 0x00000020EEF1D906 + menu 0x00000020EED1B609 + exit 0x00000020EEE1C906 + up 0x00000020EEF1D50A + down 0x00000020EEF1D30C + left 0x00000020EEF1D20D + right 0x00000020EEF1D10E + ok 0x00000020EE71520D + rew 0x00000020EE513807 + play 0x00000020EED1B00F + ff 0x00000020EED1B807 + rec 0x00000020EE11FF00 + stop 0x00000020EE91700F + pause 0x00000020EE91720D + end codes + +end remote +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005 +# +# contributed by +# +# brand: Medion +# model no. of remote control: MD1 NBC remote +# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb +# + +begin remote + + name Medion_MD1 + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 219994 + min_repeat 27 + toggle_bit 0 + + + begin codes + Power 0x000000000000D702 + TV 0x000000000000012C + Video 0x00000000000082AD + CD/DVD 0x000000000000D904 + Teletext 0x0000000000006B96 + Audio 0x000000000000DB06 + Radio 0x00000000000083AE + Page 0x0000000000000631 + Photo 0x0000000000005A85 + Info 0x000000000000042F + Menu 0x0000000000006E99 + Back 0x000000000000F520 + Wheel_Up 0x000000000000CDF8 + Wheel_Down 0x000000000000C7F2 + Wheel_Left 0x000000000000F21D + Wheel_Right 0x000000000000749F + Wheel_Click 0x000000000000F31E + Vol+ 0x000000000000DE09 + Vol- 0x0000000000005D88 + Mute 0x000000000000D500 + Program+ 0x000000000000608B + Program- 0x000000000000E10C + Prog_Switch 0x000000000000719C + Select 0x000000000000F01B + Red 0x00000000000087B2 + Green 0x0000000000000833 + Yellow 0x00000000000089B4 + Blue 0x0000000000000A35 + Stop 0x0000000000007DA8 + Pause 0x000000000000FE29 + Play 0x0000000000007AA5 + Skip_Left 0x000000000000F621 + Camera 0x0000000000006D98 + Skip_Right 0x000000000000F823 + Fast_Reverse 0x00000000000079A4 + Fast_Forward 0x000000000000FB26 + 1 0x000000000000628D + 2 0x000000000000E30E + 3 0x000000000000648F + 4 0x000000000000E510 + 5 0x0000000000006691 + 6 0x000000000000E712 + 7 0x0000000000006893 + 8 0x000000000000E914 + 9 0x0000000000006A95 + 0 0x000000000000EC17 + Record 0x000000000000FC27 + end codes + +end remote + + + +# +# this config file was automatically generated +# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 +# +# contributed by a_matteur +# +# brand: MEDION X10 RF +# model no. of remote control: remote P/N:20014752, receiver P/N:20014751 +# devices being controlled by this remote: +# + +begin remote + + name MEDION_X10_RF + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x14 + post_data_bits 16 + post_data 0x0 + gap 235923 + toggle_bit 0 + + + begin codes + tv 0x012C + vcr 0x022D + dvd 0x0904 + music 0x0B06 + radio 0x032E + photo 0x0A05 + tvpreview 0x042F + channellist 0x0530 + setup 0x001B + videodesktop 0x0631 + ch+ 0x000B + ch- 0x010C + vol+ 0x0E09 + vol- 0x0D08 + mute 0x0500 + red 0x0732 + green 0x0833 + yellow 0x0934 + blue 0x0A35 + txt 0x0B16 + 0 0x0C17 + 1 0x020D + 2 0x030E + 3 0x040F + 4 0x0510 + 5 0x0611 + 6 0x0712 + 7 0x0813 + 8 0x0914 + 9 0x0A15 + tvradio 0x011C + delete 0x0520 + rename 0x0B36 + snapshot 0x0D18 + up 0x0F1A + down 0x0722 + left 0x021D + right 0x041F + ok 0x031E + acquireimage 0x0C37 + editimage 0x0D38 + play 0x0A25 + pause 0x0E29 + stop 0x0D28 + forward 0x0B26 + rewind 0x0924 + next 0x0823 + prev 0x0621 + record 0x0C27 + fullscreen 0x0E39 + dvdmenu 0x0E19 + dvdaudio 0x0F3A + power 0x0702 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 +# +# contributed by: Peter J. Weyers +# +# brand: MEDION / ATI +# model no. of remote control: 40005927 +# devices being controlled by this remote: +# +# This is an USB attached reciever wich works by radio, not by IR. It is +# most probably a relabeled ATI X10 device and sold together with the +# Medion Notebook MD41300. It works with the lirc_atiusb driver while the +# ati_remote module is NOT(!) loaded + +begin remote + + name MEDION_40005927 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 227972 + toggle_bit 0 + + + begin codes + TV_DVD 0x1481AC0000 + VIDEO 0x1482AD0000 + PHOTO 0x1459840000 + MUSIC 0x145B860000 + PC 0x1483AE0000 + MUTE 0x1455800000 + OK 0x14739E0000 + UP 0x146F9A0000 + DOWN 0x1477A20000 + LEFT 0x14729D0000 + RIGHT 0x14749F0000 + CH+ 0x145E890000 + CH- 0x145D880000 + VOL+ 0x14608B0000 + VOL- 0x14618C0000 + PLAY_PAUSE 0x147AA50000 + RECORD 0x147CA70000 + STOP 0x147DA80000 + FRWND 0x1479A40000 + FFWD 0x147BA60000 + PREV 0x1476A10000 + NEXT 0x1478A30000 + 1 0x14628D0000 + 2 0x14638E0000 + 3 0x14648F0000 + 4 0x1465900000 + 5 0x1466910000 + 6 0x1467920000 + 7 0x1468930000 + 8 0x1469940000 + 9 0x146A950000 + 0 0x146C970000 + RC 0x1484AF0000 + Screen_Symbol 0x146B960000 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006 +# +# contributed by +# +# brand: Medion USB Remote Control X10 +# model no. of remote control: 40009936 +# devices being controlled by this remote: +# + +begin remote + + name Medion_X10 + bits 40 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 219969 + toggle_bit 0 + + + begin codes + off 0x14D7020000 + tv 0x14012C0000 + video 0x1482AD0000 + dvd 0x14D9040000 + vt 0x146B960000 + audio 0x14DB060000 + radio 0x1483AE0000 + book 0x1406310000 + photo 0x145A850000 + info 0x14042F0000 + 0 0x146C970000 + 1 0x14E20D0000 + 2 0x14638E0000 + 3 0x14E40F0000 + 4 0x1465900000 + 5 0x14E6110000 + 6 0x1467920000 + 7 0x1468930000 + 8 0x14E9140000 + 9 0x146A950000 + ok 0x14F31E0000 + up 0x14CDF80000 + down 0x1446710000 + left 0x14F21D0000 + right 0x14749F0000 + menu 0x14EE190000 + back 0x1475A00000 + red 0x1407320000 + green 0x1488B30000 + yellow 0x1409340000 + blue 0x148AB50000 + mute 0x14D5000000 + ch+ 0x14608B0000 + ch- 0x14E10C0000 + vol+ 0x145E890000 + vol- 0x14DD080000 + switch 0x14719C0000 + stop 0x14FD280000 + pause 0x147EA90000 + play 0x14FA250000 + reward 0x1476A10000 + forward 0x14F8230000 + skipr 0x1479A40000 + skipf 0x14FB260000 + rec 0x147CA70000 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia new file mode 100644 index 0000000..7091aa4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia @@ -0,0 +1,72 @@ +# +# This is for the remote that Avermedia bundles with its TVCapture and +# TVPhone, the classic ones (pre 98). +# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes +# lirc's job easy. You need at least lirc-0.6.3 to use this config file +# +# this config file was automatically generated +# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001 +# +# contributed by Santiago Garcia Mantinan +# +# brand: Avermedia +# model: TVCapture & TVPhone, the classic ones (pre 98) +# supported devices: This remote control comes with some TV Tuner cards from +# Avermedia. + +begin remote + + name Avermedia + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8984 4527 + one 568 1681 + zero 568 558 + ptrail 547 + repeat 8985 2276 + pre_data_bits 16 + pre_data 0x2FD + gap 108069 + toggle_bit 0 + + + begin codes + TV 0x0000000000006897 + FM 0x000000000000A857 + EXIT 0x00000000000048B7 + DISPLAY 0x00000000000030CF + FREEZE 0x00000000000028D7 + CAPTURE 0x0000000000008877 + VIDEO 0x00000000000038C7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + AUDIO 0x00000000000018E7 + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + FULLSCREEN 0x000000000000F00F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + LOOP 0x000000000000C837 + 0 0x00000000000050AF + LEFTARROW 0x00000000000000FF + RIGHTARROW 0x000000000000E817 + MUTE 0x00000000000008F7 + COLOR 0x000000000000B04F + PREVIEW 0x000000000000708F + CHANNELUP 0x000000000000D827 + VOL_UP 0x00000000000058A7 + AUTOSCAN 0x000000000000B847 + ENTER 0x0000000000009867 + CHANNELDOWN 0x000000000000F807 + VOL_DOWN 0x0000000000007887 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 new file mode 100644 index 0000000..f60ee50 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.avermedia98 @@ -0,0 +1,175 @@ +# +# this config file was automatically generated +# using lirc-0.5.5 on Thu May 25 18:00:24 2000 +# +# contributed by Michal Kochanowicz & Jesus Bravo Alvarez +# +# brand: AVerMedia +# model: ? +# supported devices: some TVCapture98 (ID 0x00021461) and +# some TVPhone98 (ID 0x00011461) cards + +begin remote + + name TVCapture98 + bits 6 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 +# pre_data_bits 16 +# pre_data 0x40BF + repeat 9080 2189 + gap 108056 + repeat_bit 0 + + begin codes + TV/FM 0x0000000000000023 + CD 0x0000000000000022 +# TELETEXT 0x000000000000C03F + POWER 0x0000000000000027 + + 1 0x0000000000000018 + 2 0x0000000000000010 + 3 0x0000000000000008 + VIDEO 0x0000000000000000 + + 4 0x0000000000000019 + 5 0x0000000000000011 + 6 0x0000000000000009 + AUDIO 0x0000000000000001 + + 7 0x000000000000001A + 8 0x0000000000000012 + 9 0x000000000000000A + FULLSCREEN 0x0000000000000002 + + 0 0x000000000000001B + DISPLAY 0x0000000000000013 + COLOR 0x000000000000000B + LOOP 0x0000000000000003 + + UNLABELED 0x000000000000001C + LEFT 0x0000000000000014 + RIGHT 0x000000000000000C + PREVIEW 0x0000000000000004 + + AUTOSCAN 0x000000000000001D + FREEZE 0x0000000000000015 + CAPTURE 0x000000000000000D + MUTE 0x0000000000000005 + + RED 0x000000000000001E + VOL_DOWN 0x0000000000000016 + VOL_UP 0x000000000000000E + YELLOW 0x0000000000000006 + + GREEN 0x000000000000001F + CH_DOWN 0x0000000000000017 + CH_UP 0x000000000000000F + BLUE 0x0000000000000007 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 +# +# contributed by Christoph Bartelmus +# +# brand: AVerMedia +# model: ? (36 buttons) +# supported devices: TVPhone98 card (ID 0x00031461) +# TVCapture98 card (ID 0x00041461) +# +# This config file does work with both homebrew receivers and +# original AVerMedia TV cards !!! +# + +begin remote + + name TVPhone98 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0x40BF + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x000000000000807F + CD 0x00000000000040BF + TELETEXT 0x000000000000C03F + VIDEO 0x00000000000020DF + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + AUDIO 0x00000000000010EF + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + FULLSCREEN 0x00000000000030CF + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + + PREVIEW 0x00000000000008F7 + 0 0x0000000000008877 + DISPLAY 0x00000000000048B7 + LOOP 0x000000000000C837 + MUTE 0x00000000000028D7 + AUTOSCAN 0x000000000000A857 + FREEZE 0x0000000000006897 + CAPTURE 0x000000000000E817 + PLAY 0x00000000000018E7 + RECORD 0x0000000000009867 + PAUSE 0x00000000000058A7 + STOP 0x000000000000D827 + YELLOW 0x00000000000038C7 + RED 0x000000000000B847 + VOL_DOWN 0x0000000000007887 + VOL_UP 0x000000000000F807 + end codes + +end remote + +begin remote + + name TVPhone98_ext + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9078 4437 + one 615 1631 + zero 615 515 + ptrail 620 + repeat 9080 2189 + pre_data_bits 16 + pre_data 0xC03F + gap 108056 + repeat_bit 0 + + begin codes + BLUE 0x00000000000000FF + GREEN 0x000000000000807F + CH_DOWN 0x00000000000040BF + CH_UP 0x000000000000C03F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate new file mode 100644 index 0000000..36b1c6b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircd.conf.vdomate @@ -0,0 +1,61 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002 +# +# contributed by +# +# brand: AVerMedia +# model: +# supported devices: VDOMATE (ID 0x3001461) +# + +begin remote + + name hanircd + bits 32 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9086 4425 + one 625 1624 + zero 625 500 + ptrail 624 + repeat 9087 2185 + gap 107977 + toggle_bit 0 + + + begin codes + power 0x0000000040BF00FF + one 0x0000000040BFA05F + two 0x0000000040BF609F + three 0x0000000040BFE01F + four 0x0000000040BF906F + five 0x0000000040BF50AF + six 0x0000000040BFD02F + seven 0x0000000040BFB04F + eight 0x0000000040BF708F + nine 0x0000000040BFF00F + zero 0x0000000040BF8877 + video 0x0000000040BF20DF + fullscreen 0x0000000040BF30CF + display 0x0000000040BF48B7 + color 0x0000000040BFC837 + loop 0x0000000040BF08F7 + coloup 0x0000000040BF6897 + colordn 0x0000000040BFE817 + preview 0x0000000040BF28D7 + autoscan 0x0000000040BF9867 + freeze 0x0000000040BF58A7 + capture 0x0000000040BFD827 + mute 0x0000000040BF18E7 + volumeup 0x0000000040BF7887 + volumedown 0x0000000040BFF807 + chnldown 0x00000000C03F40BF + chnlup 0x00000000C03FC03F + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia new file mode 100644 index 0000000..e950862 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +#PROTOCOL IntelliMouse +PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * FM + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOLUP +MOVE_OUT * VOLDOWN + +BUTTON1_CLICK * DISPLAY +BUTTON2_CLICK * FREEZE +BUTTON3_CLICK * CAPTURE + +BUTTON1_TOGGLE * AUDIO +BUTTON2_TOGGLE * FULLSCREEN +BUTTON3_TOGGLE * LOOP diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 new file mode 100644 index 0000000..2885372 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/avermedia/lircmd.conf.avermedia98 @@ -0,0 +1,37 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +# ACTIVATE * MENUE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_UP +MOVE_OUT * VOL_DOWN + +BUTTON1_DOWN * 5 +BUTTON1_UP * 0 + +BUTTON1_DOWN * TV/FM +BUTTON2_DOWN * CD +BUTTON3_DOWN * TELETEXT +BUTTON1_CLICK * DISPLAY +BUTTON3_CLICK * LOOP + +BUTTON1_TOGGLE * VIDEO +BUTTON2_TOGGLE * AUDIO +BUTTON3_TOGGLE * FULLSCREEN diff --git a/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/avermedia/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy new file mode 100644 index 0000000..1fd689f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy @@ -0,0 +1,63 @@ +# +# this config file was automatically generated +# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001 +# +# contributed by Miguel Angel Alvarez +# +# brand: BESTBUY +# model: Easy TV (BT848) +# supported devices: +# + +begin remote + + name BESTBUY + bits 5 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 3 + pre_data 0x0 +# gap 149990 + gap 199989 + toggle_bit 2 + + + begin codes + 0 0x0000000000000000 + 1 0x0000000000000001 + 2 0x0000000000000002 + 3 0x0000000000000003 + 4 0x0000000000000004 + 5 0x0000000000000005 + 6 0x0000000000000006 + 7 0x0000000000000007 + 8 0x0000000000000008 + 9 0x0000000000000009 + TV 0x000000000000001C + POWER 0x0000000000000012 + VIDEO 0x0000000000000011 + PREVIEW 0x000000000000000F + MUTE 0x0000000000000013 + SCAN 0x0000000000000010 + CHANNEL_UP 0x000000000000001A + CHANNEL_DOWN 0x000000000000001E + VOL_UP 0x000000000000001B + VOL_DOWN 0x000000000000001F + LOOP 0x000000000000000A + 100 0x0000000000000017 + ZOOM 0x000000000000000D + RECORD 0x000000000000000E + STOP 0x000000000000001D + PLAY 0x0000000000000019 + FREEZE 0x0000000000000016 + COLOR 0x0000000000000014 + LEFT 0x0000000000000018 + RIGHT 0x000000000000000C + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 new file mode 100644 index 0000000..77e87e3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircd.conf.bestbuy2 @@ -0,0 +1,59 @@ +# +# this config file was automatically generated +# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001 +# +# contributed by Miguel Angel Alvarez +# +# brand: BESTBUY +# model: EASY TV (BT878) +# supported devices: +# + +begin remote + + name BESTBUY + bits 7 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 1 + pre_data 0x0 + gap 199981 + toggle_bit 0 + + + begin codes + TV/FM 0x0000000000000043 + SCAN 0x0000000000000047 + ZOOM 0x000000000000005C + POWER 0x000000000000005E + 1 0x0000000000000041 + 2 0x000000000000004B + 3 0x000000000000005B + VOL+ 0x000000000000005F + 4 0x0000000000000045 + 5 0x0000000000000049 + 6 0x0000000000000055 + VOL- 0x0000000000000057 + 7 0x0000000000000046 + 8 0x000000000000004A + 9 0x0000000000000052 + CH+ 0x0000000000000056 + 0 0x0000000000000042 + LOOP 0x0000000000000053 + +100 0x0000000000000050 + CH- 0x0000000000000054 + SOURCE 0x0000000000000040 + MUTE 0x0000000000000058 + - 0x0000000000000044 + FUNCTION 0x000000000000004E + + 0x000000000000004C + RESET 0x000000000000004D + FREEZE 0x000000000000004F + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy new file mode 100644 index 0000000..e57d11f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * RESERVED + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CHANNEL_UP +MOVE_OUT * CHANNEL_DOWN + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * ZOOM +BUTTON2_TOGGLE * RECORD +BUTTON3_TOGGLE * STOP + +BUTTON1_CLICK * POWER +BUTTON2_CLICK * TV +BUTTON3_CLICK * SCAN + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 new file mode 100644 index 0000000..c515058 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/bestbuy/lircmd.conf.bestbuy2 @@ -0,0 +1,34 @@ +# +# lircmd config file +# + +#PROTOCOL IntelliMouse +PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * PLAY + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH+ +MOVE_OUT * CH- + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * FUNCTION +BUTTON2_TOGGLE * - +BUTTON3_TOGGLE * + + +BUTTON1_CLICK * TV/FM +BUTTON2_CLICK * SCAN +BUTTON3_CLICK * ZOOM + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca new file mode 100644 index 0000000..c1a0fa1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircd.conf.caraca @@ -0,0 +1,46 @@ +# +# +# contributed by Konrad Riedel +# +# brand: CARACA +# model: RC5 Remote Control +# +# supported devices: +# CARACA nodes - see http://caraca.sourceforge.net +# first byte: node address +# 2nd byte: ir code +# + +begin remote + + name Caraca + bits 16 + + begin codes + POWER 0x3ff3 + 1 0x3ffe + 2 0x3ffd + 3 0x3ffc + 4 0x3ffb + 5 0x3ffa + 6 0x3ff9 + 7 0x3ff8 + 8 0x3ff7 + 9 0x3ff6 + 0 0x3ff5 + PAUSE 0x3fcf + EJECT 0x3fe2 + SEEK- 0x3fcd + PLAY 0x3fca + SEEK+ 0x3fcb + RECORD 0x3fd2 + STOP 0x3fc9 + CH- 0x3fde + CH+ 0x3fdf + VOL- 0x3fee + VOL+ 0x3fef + MUTE 0x3ff2 + TV/FM 0x3fe3 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca new file mode 100644 index 0000000..6baf5e4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/caraca/lircrc.caraca @@ -0,0 +1,134 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Konrad Riedel +# +begin + prog = irexec + button = tv/fm + config = xawtv -geometry +64+64 & + mode = tv + flags = once +end + +begin tv + begin + prog = xawtv + button = power + config = quit + flags = mode + end + begin + prog = xawtv + button = source + repeat = 1 + config = setinput next + end + begin + prog = xawtv + button = zoom + repeat = 1 + config = fullscreen + end + begin + prog = xawtv + button = ch- + repeat = 1 + config = setstation prev + end + begin + prog = xawtv + button = ch+ + repeat = 1 + config = setstation next + end + begin + prog = xawtv + button = record + repeat = 1 + #config = snap jpeg + config = quit + end + begin + prog = xawtv + button = scan + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = xawtv + button = MUTE + config = volume mute + end +end tv +begin + prog = irexec + button = power + config = xmms& + mode = xmms + flags = once +end + +begin xmms + begin + prog = xmms + button = play + config = PLAY + end + begin + prog = xmms + button = pause + config = PAUSE + end + begin + prog = xmms + button = stop + config = STOP + end + begin + prog = xmms + button = vol- + repeat = 1 + config = VOL_DOWN + end + begin + prog = xmms + button = vol+ + repeat = 1 + config = VOL_UP + end + + begin + prog = xmms + button = power + config = QUIT + flags = mode + end + begin + prog = xmms + button = mute + config = MUTE + end + begin + prog = xmms + button = seek+ + repeat = 1 + config = FWD + end + begin + prog = xmms + button = seek- + repeat = 1 + config = BWD + end + begin + prog = xmms + button = ch+ + config = NEXT + end + begin + prog = xmms + button = ch- + config = PREV + end +end xmms diff --git a/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/caraca/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos new file mode 100644 index 0000000..764506c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/chronos/lircd.conf.chronos @@ -0,0 +1,56 @@ + +# +# This config file is for remote that comes with cheap TV Card made by +# Chronos. +# +# contributed by Tõnu Raitviir +# +# brand: Chronos Video Shuttle II +# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23) +# + +begin remote + + name Chronos + bits 5 + eps 30 + aeps 100 + + gap 199766 + toggle_bit 0 + + begin codes + POWER 0x0000000000000000 + MOUSE_MODE 0x0000000000000010 + FULL_SCREEN 0x0000000000000008 + CH+ 0x0000000000000009 + CH- 0x0000000000000019 + 1 0x0000000000000018 + 2 0x0000000000000004 + 3 0x0000000000000014 + 4 0x000000000000001C + 5 0x0000000000000002 + 6 0x0000000000000012 + 7 0x000000000000001A + 8 0x0000000000000006 + 9 0x0000000000000016 + 0 0x000000000000001E + VOL+ 0x0000000000000005 + VOL- 0x000000000000001D + SOURCE 0x0000000000000003 + MUTE 0x000000000000001B + AUDIO 0x0000000000000015 + VIDEO 0x0000000000000011 + CANCEL 0x000000000000001F + ENTER 0x0000000000000001 + ESC 0x000000000000000B + RECALL 0x000000000000000C + AIR_CATV 0x000000000000000E + INC 0x000000000000000A + DEC 0x000000000000000D + BOX 0x0000000000000017 + DOWN_ARROW 0x0000000000000013 + LEFT_ARROW_TERM 0x000000000000000F + RIGHT_ARROW_TERM 0x0000000000000007 + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x new file mode 100644 index 0000000..62f711e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/cph03x/lircd.conf.cph03x @@ -0,0 +1,72 @@ +# +# this config file was automatically generated +# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000 +# +# contributed by Claas Langbehn +# Please read the documentation, faq etc. +# before sending me mails. +# +# brand: ASKEY +# model: AS-218 / AS-220 +# supported devices: ASKEY MagicTV +# +# comment: repeated keys are recognized, now. +# + +begin remote + + name AS-218 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9087 4424 + one 629 1617 + zero 629 495 + ptrail 632 + repeat 9088 2182 + pre_data_bits 16 + pre_data 0x61D6 + gap 107905 + repeat_bit 0 + + begin codes + 0 0x00000000000000FF + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + LOOP 0x00000000000050AF +# unused + FINE_UP(PLUS) 0x00000000000030CF + ZOOM 0x000000000000B04F + RECORD 0x000000000000708F + PREVIEW 0x000000000000F00F + + SCAN 0x00000000000008F7 + VIDEO 0x0000000000008877 + POWER 0x00000000000048B7 + MUTE 0x000000000000C837 + COLOR 0x00000000000028D7 +#unused + FREEZE 0x0000000000006897 + 100 0x000000000000E817 + FINE_DOWN(MINUS) 0x00000000000018E7 + PLAY 0x0000000000009867 + CH_UP 0x00000000000058A7 + VOL_UP 0x000000000000D827 + TV 0x00000000000038C7 + STOP 0x000000000000B847 + CH_DOWN 0x0000000000007887 + VOL_DOWN 0x000000000000F807 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb new file mode 100644 index 0000000..e84a68b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.alsa_usb @@ -0,0 +1,56 @@ +# +# contributed by Clemens Ladisch +# +# brand: Creative +# model: RM-1500 +# supported devices: Sound Blaster Extigy, SB Audigy 2 NX +# +# This is for the integrated IR receiver in Creative USB audio devices +# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio +# driver from ALSA 1.0.9 or later). +# +# This file should work with the exaudio driver, too. +# + +begin remote + + name RM-1500 + bits 8 + + begin codes + power 0x01 + 1 0x02 + 2 0x03 + 3 0x04 + 4 0x05 + 5 0x06 + 6 0x07 + 7 0x08 + 8 0x09 + 9 0x0a + 0 0x0b + cmss 0x0c + mute 0x0d + rec 0x0e + vol- 0x0f + vol+ 0x10 + stop-eject 0x11 + play-pause 0x12 + slow 0x13 + prev 0x14 + next 0x15 + step 0x16 + eax 0x17 + options 0x18 + display 0x19 + return 0x1a + start 0x1b + cancel 0x1c + up 0x1d + left 0x1e + ok 0x1f + right 0x20 + down 0x21 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox new file mode 100644 index 0000000..c5d2d9c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.breakoutbox @@ -0,0 +1,55 @@ +# +# contributed by Juergen Jaeschke +# +# brand: Creative +# model: Creative BreakOut-Box Remote Control +# + +begin remote + + name Creative BreakOut-Box IR + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + gap 199984 + toggle_bit 0 + + begin codes + DVD/CD 0x0000000000000001 + DVR/TV 0x0000000000000000 + MENU 0x0000000000000003 + LANG 0x0000000000000005 + PLAYLIST 0x0000000000000011 + BACKWARD 0x000000000000000A + PLAY 0x0000000000000008 + FORWARD 0x000000000000000F + LAST 0x0000000000000002 + STOP 0x0000000000000007 + NEXT 0x0000000000000006 + MUTE 0x0000000000000014 + STEP 0x0000000000000009 + UP 0x000000000000000C + LEFT 0x000000000000000B + RIGHT 0x000000000000000D + DOWN 0x000000000000000E + VOL+ 0x0000000000000012 + VOL- 0x0000000000000015 + OK 0x0000000000000011 + ANGLE+ 0x0000000000000010 + ANGLE- 0x0000000000000013 + REC 0x0000000000000004 + 1 0x0000000000000016 + 2 0x0000000000000017 + 3 0x0000000000000018 + 4 0x0000000000000019 + 5 0x000000000000001A + 6 0x000000000000001B + 7 0x000000000000001C + 8 0x000000000000001D + 9 0x000000000000001E + 0 0x000000000000001F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative new file mode 100644 index 0000000..69f3d27 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.creative @@ -0,0 +1,59 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001 +# +# contributed by Stephen White +# +# brand: Creative +# model: PC-DVD Remote +# supported devices: Creative-Infra-Receiver +# + +begin remote + + name CREATIVE_INFRA_DVD + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9293 4302 + one 771 1494 + zero 771 358 + ptrail 756 + pre_data_bits 16 + pre_data 0x8435 + gap 108646 + toggle_bit 0 + + begin codes + play 0x00000000000005FA + stop 0x00000000000016E9 + pause 0x00000000000000FF + eject 0x00000000000002FD + last 0x00000000000017E8 + rrev 0x00000000000004FB + ffwd 0x00000000000006F9 + next 0x00000000000001FE + 1 0x00000000000008F7 + 2 0x00000000000009F6 + 3 0x0000000000000AF5 + shift 0x00000000000014EB + 4 0x0000000000000CF3 + 5 0x0000000000000DF2 + 6 0x0000000000000EF1 + mouse 0x00000000000007F8 + 7 0x00000000000010EF + 8 0x00000000000011EE + 9 0x00000000000012ED + vol+ 0x0000000000000FF0 + start 0x00000000000003FC + 0 0x00000000000015EA + mute 0x0000000000000BF4 + vol- 0x00000000000013EC + end codes + +end remote + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd new file mode 100644 index 0000000..cdaaad9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.infracd @@ -0,0 +1,61 @@ +# +# this config file was automatically generated +# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001 +# +# contributed by +# +# brand: Creative +# model: CD-Rom Creditcard-sized IR-Controller +# supported devices: CD-Rom +# + +begin remote + + name CREATIVE_INFRA + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9051 4625 + one 534 1707 + zero 534 588 + ptrail 490 + repeat 9039 2363 + pre_data_bits 16 + pre_data 0x8435 + gap 108434 + min_repeat 1 + toggle_bit 0 + + + begin codes + PAUSE 0x00000000000001FE + PLAY 0x00000000000002FD + STOP 0x00000000000003FC + REW 0x00000000000005FA + PREV 0x00000000000006F9 + FF 0x00000000000007F8 + MENU 0x00000000000004FB + MOUSE 0x00000000000008F7 + 1 0x00000000000009F6 + 2 0x0000000000000AF5 + 3 0x0000000000000BF4 + 4 0x0000000000000DF2 + 5 0x0000000000000EF1 + 6 0x0000000000000FF0 + 7 0x00000000000011EE + 8 0x00000000000012ED + 9 0x00000000000013EC + 0 0x00000000000016E9 + MUTE 0x0000000000000CF3 + VOL_UP 0x00000000000010EF + VOL_DOWN 0x00000000000014EB + SHIFT 0x00000000000015EA + ENTER 0x00000000000017E8 + ZOOM 0x00000000000018E7 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive new file mode 100644 index 0000000..b68e5c4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/creative/lircd.conf.livedrive @@ -0,0 +1,115 @@ +# +# contributed by Andrew de Quincey +# +# brand: rm1000w +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + + name rm1000w + flags SPACE_ENC|CONST_LENGTH + bits 16 + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + pre_data_bits 16 + pre_data 0x8322 + gap 108000 + toggle_bit 0 + + repeat 9000 2250 + + frequency 38000 + duty_cycle 33 + + + begin codes + 1 0x0000000000008B74 + 2 0x0000000000008F70 + 3 0x000000000000906F + 4 0x0000000000008A75 + 5 0x000000000000847B + 6 0x0000000000007887 + 7 0x0000000000008976 + 8 0x000000000000837C + 9 0x0000000000007788 + 0 0x000000000000807F + stop 0x000000000000857A + play 0x0000000000007986 + pause 0x0000000000007986 + slow 0x0000000000007D82 + step 0x0000000000007E81 + prev 0x0000000000007F80 + next 0x0000000000007A85 + mute 0x0000000000006E91 + vol- 0x000000000000639C + vol+ 0x000000000000629D + eax 0x0000000000008C73 + options 0x000000000000827D + display 0x0000000000007689 + return 0x0000000000008E71 + start 0x0000000000008877 + close 0x0000000000007C83 + up 0x0000000000007B84 + down 0x0000000000008D72 + left 0x0000000000008778 + right 0x000000000000758A + ok 0x000000000000817E + power 0x000000000000619e + cmss 0x000000000000718e + record 0x000000000000738c + + end codes + +end remote + +# +# contributed by Stefan Brüns +# +# brand: Creative Audigy 2 ZS Platinum LiveDrive +# model no. of remote control: +# devices being controlled by this remote: +# + + +begin remote + + + name LiveDrive + flags SPACE_ENC|CONST_LENGTH + bits 16 + eps 30 + aeps 100 + + + header 9000 4500 + one 563 1687 + zero 563 562 + pre_data_bits 16 + pre_data 0x8000 + gap 108000 + toggle_bit 0 + + + repeat 9000 2250 + + + frequency 38000 + duty_cycle 33 + + + + + begin codes + mute 0x0000000000000040 + vol+ 0x0000000000008080 + vol- 0x0000000000008082 + cmss 0x0000000000000080 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV new file mode 100644 index 0000000..fbc91a8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/dvico/lircd.conf.fusionHDTV @@ -0,0 +1,221 @@ +# +# contributed by Chris Pascoe +# +# brand: DVICO +# model no. of remote control: DVB-T +# devices being controlled by this remote: +# + +begin remote + + name DVICO + bits 32 + eps 0 + aeps 0 + + one 0 0 + zero 0 0 + pre_data_bits 32 + pre_data 0x10046 + gap 195755 + post_data_bits 0 + toggle_bit 0 + + begin codes + 1 0x00000000000011F9 + 2 0x00000000000012F9 + 3 0x00000000000013F9 + 4 0x00000000000014F9 + 5 0x00000000000015F9 + 6 0x00000000000016F9 + 7 0x00000000000017F9 + 8 0x00000000000018F9 + 9 0x00000000000019F9 + 0 0x00000000000010F9 + power 0x0000000000000AF9 + pcoff 0x0000000000000CF9 + camera 0x0000000000001AF9 + record 0x0000000000001BF9 + chup 0x00000000000000F9 + chdown 0x00000000000001F9 + volup 0x00000000000002F9 + voldown 0x00000000000003F9 + playpause 0x0000000000001FF9 + rew 0x0000000000001CF9 + stop 0x0000000000001EF9 + ff 0x0000000000001DF9 + folder 0x00000000000040F9 + atvdtv 0x00000000000006F9 + dvhs 0x00000000000041F9 + menu 0x00000000000008F9 + aspect 0x00000000000007F9 + zoom 0x00000000000004F9 + epg 0x0000000000000BF9 + mute 0x0000000000000DF9 + back 0x0000000000000EF9 + hd 0x0000000000000FF9 + red 0x00000000000005F9 + green 0x00000000000009F9 + yellow 0x00000000000042F9 + blue 0x00000000000043F9 + end codes + +end remote + +# +# this config file was automatically generated +# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005 +# +# contributed by anonymous +# +# brand: DVICO +# model no. of remote control: MCE Remote +# + +begin remote + + name DVICO_MCE + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x0 + post_data_bits 8 + post_data 0x0 + gap 195956 + toggle_bit 0 + + + begin codes + ok 0x0000000000FE5E00 + dtv 0x0000000000FE0200 + mp3 0x0000000000FE0E00 + dvd 0x0000000000FE1A00 + cpf 0x0000000000FE1E00 + setup 0x0000000000FE1600 + tv_onoff 0x0000000000FE4600 + guide 0x0000000000FE0A00 + back 0x0000000000FE4900 + more 0x0000000000FE5900 + dvd_menu 0x0000000000FE4D00 + alt_tab 0x0000000000FE5500 + replay 0x0000000000FE0F00 + skip 0x0000000000FE1200 + up 0x0000000000FE5100 + down 0x0000000000FE5300 + left 0x0000000000FE5B00 + right 0x0000000000FE5F00 + start 0x0000000000FE4200 + vol_up 0x0000000000FE1500 + vol_down 0x0000000000FE0500 + ch_up 0x0000000000FE1100 + ch_down 0x0000000000FE0900 + snapshot 0x0000000000FE5200 + live 0x0000000000FE5A00 + folder_open 0x0000000000FE1900 + 1 0x0000000000FE0B00 + 2 0x0000000000FE1700 + 3 0x0000000000FE1B00 + 4 0x0000000000FE0700 + 5 0x0000000000FE5000 + 6 0x0000000000FE5400 + 7 0x0000000000FE4800 + 8 0x0000000000FE4C00 + 9 0x0000000000FE5800 + 0 0x0000000000FE0300 + aspect 0x0000000000FE1300 + fullscreen 0x0000000000FE1F00 + rewind 0x0000000000FE4300 + playpause 0x0000000000FE4700 + fastforward 0x0000000000FE4F00 + stop 0x0000000000FE0D00 + mute 0x0000000000FE5700 + record 0x0000000000FE0100 + white_onoff 0x0000000000FE4E00 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005 +# +# contributed by: David Bussenschutt +# +# brand: "DViCO" +# model no. of remote control: "Fusion Remote MCE" +# devices being controlled by this remote: My MythTV install +# + +begin remote + + name DVICO_MCE + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 48 + pre_data 0x100460000 + post_data_bits 8 + post_data 0xFE + gap 195843 + toggle_bit 0 + + + begin codes + ok 0x5e + up 0x51 + down 0x53 + left 0x5B + right 0x5F + setup 0x16 + tv_onoff 0x46 + guide 0x0A + dtv 0x02 + mp3 0x0E + dvd 0x1A + cpf 0x1E + back 0x49 + more 0x59 + dvd_menu 0x4D + alt_tab 0x55 + replay 0x0F + skip 0x12 + start 0x42 + vol_up 0x15 + vol_down 0x05 + ch_up 0x11 + ch_down 0x09 + photo 0x52 + live 0x5A + folder 0x19 + 1 0x0B + 2 0x17 + 3 0x1B + 4 0x07 + 5 0x50 + 6 0x54 + 7 0x48 + 8 0x4C + 9 0x58 + 0 0x03 + ratio 0x13 + zoom 0x1F + rew 0x43 + playpause 0x47 + ff 0x4F + mute 0x57 + stop 0x0D + rec 0x01 + power_onoff 0x4e + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 new file mode 100644 index 0000000..a10181d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircd.conf.ea65 @@ -0,0 +1,73 @@ +# +# Config file for AOpen XC Cube EA65, EA65-II +# Max Krasnyanskiy +# + +begin remote + name EA65 + bits 24 + eps 10 + aeps 100 + + gap 960000 + toggle_bit 0 + + begin codes + tv/pvr 0x0014814c + photo 0x0017810e + htpc 0x0011811b + dvd/vcd 0x00128100 + cd/mp3 0x00138152 + fm 0x00158111 + video 0x0016810f + + 1 0x0041810b + 2 0x00428115 + 3 0x00438112 + 4 0x00448141 + 5 0x00458119 + 6 0x00468116 + 7 0x00478150 + 8 0x0048811a + 9 0x00498155 + * 0x00328156 + 0 0x00408158 + # 0x0030814d + + menu 0x00188104 + exit 0x001d8154 + enter 0x001e8101 + up 0x00198159 + down 0x001a811c + left 0x001c8102 + right 0x001b815d + + vol+ 0x00298103 + vol- 0x002a814e + ch+ 0x002c8113 + ch- 0x002d8117 + mute 0x00288105 + tune+ 0x002e8144 + tune- 0x002f8148 + mem 0x00318145 + scan 0x00278151 + + display 0x0034811f + eject 0x0035815c + rwnd 0x00228118 + ffwd 0x00218110 + rec 0x002b810a + repeate 0x0038815a + prev 0x00238107 + next 0x00248114 + time/shift 0x00338108 + stop 0x0020811d + play/pause 0x001f8109 + + play-pause 0x0080811d + stop-eject 0x00238107 + mode- 0x00ff1080 + mode+ 0x00ff1180 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 new file mode 100644 index 0000000..fd96d42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ea65/lircrc.ea65 @@ -0,0 +1,381 @@ +# +# Max Krasnyanskiy +# + +# +# Xine key bindings. +# + +# start playback +begin + button = dvd/vcd + prog = xine + repeat = 1 + config = Play +end + +# playback pause toggle +begin + button = play/pause + prog = xine + repeat = 1 + config = Pause +end + +# stop playback +begin + button = stop + prog = xine + repeat = 1 + config = Stop +end + +# eject the current medium +begin + button = eject + prog = xine + repeat = 1 + config = Eject +end + +# scan playlist to grab stream infos +begin + button = mem + prog = xine + repeat = 1 + config = ScanPlaylistInfo +end + +# set position to -60 seconds in current stream +begin + button = rwnd + prog = xine + repeat = 1 + config = SeekRelative-60 +end + +# set position to +60 seconds in current stream +begin + button = ffwd + prog = xine + repeat = 1 + config = SeekRelative+60 +end + +# increment playback speed +begin + button = tune+ + prog = xine + repeat = 1 + config = SpeedFaster +end + +# decrement playback speed +begin + button = tune- + prog = xine + repeat = 1 + config = SpeedSlower +end + +# increment audio volume +begin + button = vol+ + prog = xine + repeat = 1 + config = Volume+ +end + +# decrement audio volume +begin + button = vol- + prog = xine + repeat = 1 + config = Volume- +end + +# audio muting toggle +begin + button = mute + prog = xine + repeat = 1 + config = Mute +end + +# select next audio channel +begin + button = ch+ + prog = xine + repeat = 1 + config = AudioChannelNext +end + +# select previous audio channel +begin + button = ch- + prog = xine + repeat = 1 + config = AudioChannelPrior +end + +# interlaced mode toggle +begin + button = scan + prog = xine + repeat = 1 + config = ToggleInterleave +end + +# cycle aspect ratio values +begin + button = display + prog = xine + repeat = 1 + config = ToggleAspectRatio +end + +# jump to Title Menu +begin + button = menu + prog = xine + repeat = 1 + config = TitleMenu +end + +# menu navigate up +begin + button = up + prog = xine + repeat = 1 + config = EventUp +end + +# menu navigate down +begin + button = down + prog = xine + repeat = 1 + config = EventDown +end + +# menu navigate left +begin + button = left + prog = xine + repeat = 1 + config = EventLeft +end + +# menu navigate right +begin + button = right + prog = xine + repeat = 1 + config = EventRight +end + +# menu select +begin + button = enter + prog = xine + repeat = 1 + config = EventSelect +end + +# jump to next chapter +begin + button = next + prog = xine + repeat = 1 + config = EventNext +end + +# jump to previous chapter +begin + button = prev + prog = xine + repeat = 1 + config = EventPrior +end + +# select a subtitle file +begin + button = repeat + prog = xine + repeat = 1 + config = SubSelector +end + +# enter the number 0 +begin + button = 0 + prog = xine + repeat = 1 + config = Number0 +end + +# enter the number 1 +begin + button = 1 + prog = xine + repeat = 1 + config = Number1 +end + +# enter the number 2 +begin + button = 2 + prog = xine + repeat = 1 + config = Number2 +end + +# enter the number 3 +begin + button = 3 + prog = xine + repeat = 1 + config = Number3 +end + +# enter the number 4 +begin + button = 4 + prog = xine + repeat = 1 + config = Number4 +end + +# enter the number 5 +begin + button = 5 + prog = xine + repeat = 1 + config = Number5 +end + +# enter the number 6 +begin + button = 6 + prog = xine + repeat = 1 + config = Number6 +end + +# enter the number 7 +begin + button = 7 + prog = xine + repeat = 1 + config = Number7 +end + +# enter the number 8 +begin + button = 8 + prog = xine + repeat = 1 + config = Number8 +end + +# enter the number 9 +begin + button = 9 + prog = xine + repeat = 1 + config = Number9 +end + +# quit the program +begin + button = exit + prog = xine + repeat = 1 + config = Quit +end + +## +# End of xine key bindings. +## + +## MPlayer lirc setup + +# Show OSD +begin + prog = mplayer + button = menu + repeat = 1 + config = osd +end + +# Pause playback +begin + prog = mplayer + button = play/pause + repeat = 1 + config = pause +end + +# Stop playback and exit +begin + prog = mplayer + button = stop + repeat = 1 + config = stop #quit +end + +# Mute +begin + prog = mplayer + button = mute + repeat = 1 + config = mute +end + +# Seek back 10 seconds +begin + prog = mplayer + button = rwnd + repeat = 1 + config = seek -10 +end + +# Seek forward 30 seconds +begin + prog = mplayer + button = ffwd + repeat = 1 + config = seek +10 +end + +# Quit +begin + prog = mplayer + button = exit + repeat = 1 + config = quit +end + +# Seek forward 10 minutes +begin + prog = mplayer + button = next + repeat = 1 + config = seek +600 +end + +# Seek backward 10 minutes +begin + prog = mplayer + button = prev + repeat = 1 + config = seek -600 +end + +# Toggle full-screen +begin + prog = mplayer + button = display + repeat = 1 + config = vo_fullscreen +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/ea65/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte new file mode 100644 index 0000000..d2330a3 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/ericsson/lircd.conf.bte @@ -0,0 +1,53 @@ +# +# +# contributed by Vadim Shliakhov +# +# brand: Ericsson +# model: Mobile Phone over Bluetooth (BTE) +# +# supported devices: +# Ericsson t520m, t630 +# + +begin remote + + name bte + bits 16 + + begin codes + 0 0x0030 + 1 0x0031 + 2 0x0032 + 3 0x0033 + 4 0x0034 + 5 0x0035 + 6 0x0036 + 7 0x0037 + 8 0x0038 + 9 0x0039 + STAR 0x002a # '*' + HASH 0x0023 # '#' + UP 0x005e # '^' + DOWN 0x0076 # 'v' + LEFT 0x003c # '<' + RIGHT 0x003e # '>' + CANCEL 0x0063 # 'c' + VOL_UP 0x0075 # 'u' + VOL_DOWN 0x0064 # 'd' + +# t520m + NO 0x0065 # 'e' + YES 0x0073 # 's' + OPTION 0x004c # 'L' + MEMO 0x0047 # 'G' - hides dialog widget! + +# t630 + F_LEFT 0x005b # '[' + F_RIGHT 0x005d # ']' - triggers 'e' + J_CLICK 0x3a4a # ':J' - triggers 'e' + RETURN 0x3a52 # ':R' - triggers 'e' + CAMERA 0x3a43 # ':C' + WAP 0x3a4f # ':O' + + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf new file mode 100644 index 0000000..e645cba --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/DENON.conf @@ -0,0 +1,31 @@ +# +# generic Denon config file +# +# source: various +# +# used by: Denon, Sharp + +begin remote + + name DENON + bits 15 + flags SPACE_ENC + eps 30 + aeps 100 + + one 275 1900 + zero 275 775 + ptrail 275 + gap 43000 + repeat_bit 0 + +# frequency 32000 +# frequency is 455/12 according to stewart@neuron.com +# remote is based on Sharp lc3715 IC + frequency 38000 +# duty_cycle unknown + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf new file mode 100644 index 0000000..e786f2b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/MOTOROLA.conf @@ -0,0 +1,53 @@ +# +# generic Motorola config file +# +# source: Motorola Application Note AN463 +# ICs 68HC05K0/MC144105/MC144107 +# +# used by Grundig +# +# currently you have to create config files for such remotes manually +# as irrecord always will record the start code + +begin remote + + name MOTOROLA_START/STOP + flags SHIFT_ENC|CONST_LENGTH + bits 10 + eps 10 + aeps 250 + + header 512 2560 + one 512 512 + zero 512 512 + gap 32800 + repeat_bit 0 + frequency 32000 + duty_cycle 25 + + begin codes + START/STOP 0x0000000000000000 + end codes + +end remote + +begin remote + + name MOTOROLA + flags SHIFT_ENC|CONST_LENGTH + bits 10 + eps 10 + aeps 250 + + header 512 2560 + one 512 512 + zero 512 512 + gap 131000 + repeat_bit 0 + frequency 32000 + duty_cycle 25 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf new file mode 100644 index 0000000..51c31d9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-pulse.conf @@ -0,0 +1,32 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Toshiba + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + repeat 9000 4500 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf new file mode 100644 index 0000000..068c253 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC-short-pulse.conf @@ -0,0 +1,34 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo, +# Sanyo, Schneider, SEG, Yamaha + + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + repeat 9000 2250 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf new file mode 100644 index 0000000..18ee327 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/NEC.conf @@ -0,0 +1,30 @@ +# +# generic NEC config file +# +# source: CIrCC datasheet, exiting config files +# +# used by: Canon, Creative, Domland, Orion + +begin remote + + name NEC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 16 +# just a guess + gap 108000 + + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf new file mode 100644 index 0000000..f62e3f9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-5.conf @@ -0,0 +1,30 @@ +# +# generic RC-5 config file +# +# source: SAA3010 datasheet +# +# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider + +begin remote + + name RC-5 + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 7 + gap 113792 + toggle_bit 2 + +# frequency 35750 + frequency 36000 + duty_cycle 50 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf new file mode 100644 index 0000000..9565707 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RC-6.conf @@ -0,0 +1,28 @@ +# +# generic RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips + +begin remote + + name RC-6 + bits 8 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 13 + pre_data 0xEFB + gap 108000 + toggle_bit 5 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf new file mode 100644 index 0000000..89f847a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RCMM-32.conf @@ -0,0 +1,23 @@ +begin remote + + name RCMM-32 + bits 32 + flags RCMM|CONST_LENGTH + eps 2 + aeps 100 + + header 417 278 + three 167 778 + two 167 611 + one 167 444 + zero 167 278 + ptrail 167 + pre_data_bits 0 + gap 99817 + repeat_bit 0 + + begin codes + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf new file mode 100644 index 0000000..b9702ea --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/RECS80.conf @@ -0,0 +1,31 @@ +# +# generic RECS 80 config file +# +# source: SAA3008 datasheet +# +# used by: Saba, Technisat + +begin remote + + name RECS80 + bits 5 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 150 + + one 141 7590 + zero 141 5090 + ptrail 141 + pre_data_bits 6 + pre_data 0x22 + gap 121440 + toggle_bit 2 + +# frequency 37916 + frequency 38000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf new file mode 100644 index 0000000..fbcf8dc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SANYO.conf @@ -0,0 +1,34 @@ +# +# generic Sanyo config file +# +# source: CIrCC datasheet, exiting config files +# Sanyo LC7461M datasheet +# +# used by: Aiwa, Chinon, Sanyo + +begin remote + + name Sanyo + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + pre_data_bits 26 +# just a guess + gap 108000 + + repeat 9000 4500 + +# 455kHz/12 + frequency 37916 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf new file mode 100644 index 0000000..d62d12c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY12.conf @@ -0,0 +1,28 @@ +# +# generic Sony 12-bit config file +# +# source: various +# + +begin remote + + name SONY + bits 7 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 2400 600 + one 1200 600 + zero 600 600 + post_data_bits 5 + gap 45000 + min_repeat 2 + + frequency 40000 + duty_cycle 33 + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf new file mode 100644 index 0000000..4a64ca7 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/generic/SONY20.conf @@ -0,0 +1,29 @@ +# +# generic Sony 20-bit config file +# +# source: various +# + +begin remote + + name SONY + bits 7 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 2400 600 + one 1200 600 + zero 600 600 + post_data_bits 13 +# gap is just a guess + gap 45000 + min_repeat 2 + + frequency 40000 +# duty_cycle unknown + + begin codes + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap new file mode 100644 index 0000000..8e453b9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircd.conf.streamzap @@ -0,0 +1,69 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc new file mode 100644 index 0000000..6f86bfe --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/lircrc @@ -0,0 +1,472 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY' +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end + +begin + prog = mythtv + button = POWER + config = Esc +end + +# ??? +begin + prog = mythtv + button = MUTE + config = F9 +end + +begin + prog = mythtv + button = CH_UP + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = VOL_UP + repeat = 3 + config = ] +end + +begin + prog = mythtv + button = CH_DOWN + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = VOL_DOWN + repeat = 3 + config = [ +end + +begin + prog = mythtv + button = UP + repeat = 3 + config = Up +end + +begin + prog = mythtv + button = LEFT +# navigates, or skips back during playback or live tv. + config = Left +end + +begin + prog = mythtv + button = OK + config = Return +end + +begin + prog = mythtv + button = RIGHT +# navigates, or skips forwards during playback or live tv. + config = Right +end + +begin + prog = mythtv + button = DOWN + repeat = 3 + config = Down +end + +begin + prog = mythtv + button = MENU + config = m +end + +begin + prog = mythtv + button = EXIT + config = Esc +end + +begin + prog = mythtv + button = PLAY + config = l +end + +begin + prog = mythtv + button = PAUSE + config = p +end + +begin + prog = mythtv + button = STOP + config = Esc +end + +begin + prog = mythtv + # skip backward + button = |<< + config = PgUp +end + +begin + prog = mythtv + # skip forward + button = >>| + config = PgDown +end + +begin + prog = mythtv + button = RECORD + config = r +end + +begin + prog = mythtv + # rewind + button = << + config = < +end + +begin + prog = mythtv + # fast forward + button = >> + config = > +end + +begin + prog = mythtv + button = RED + # Delete + config = z +end + +begin + prog = mythtv + button = GREEN + # Info + config = i +end + +begin + prog = mythtv + button = YELLOW + # change aspect ratio + config = w +end + +begin + prog = mythtv + button = BLUE + config = Tab +end + +# MPLAYER +begin + prog = mplayer + button = POWER + config = quit +end + +begin + prog = mplayer + button = MUTE + config = mute +end + +begin + prog = mplayer + button = VOL_UP + repeat = 3 + config = volume +1 +end + +begin + prog = mplayer + button = VOL_DOWN + repeat = 3 + config = volume -1 +end + +begin + prog = mplayer + button = UP + repeat = 3 + config = seek +10 +end + +begin + prog = mplayer + button = LEFT +# navigates, or skips back during playback or live tv. + config = seek -30 +end + +begin + prog = mplayer + button = RIGHT +# navigates, or skips forwards during playback or live tv. + config = seek +60 +end + +begin + prog = mplayer + button = DOWN + repeat = 3 + config = seek -10 +end + +begin + prog = mplayer + button = EXIT + config = quit +end + +begin + prog = mplayer + button = play + config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin + prog = mplayer + button = STOP + config = quit +end + +begin + prog = mplayer + # skip backward + button = |<< + config = seek -600 +end + +begin + prog = mplayer + # skip forward + button = >>| + config = seek +600 +end + +begin + prog = mplayer + # slow forward + button = << + config = speed_mult 0.5 +end + +begin + prog = mplayer + # fast forward + button = >> + config = speed_mult 2.0 +end + +### Xine lirc setup By AnDy! + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = UP +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = DOWN +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = LEFT +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = RIGHT +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = EXIT +repeat = 3 +config = Menu +end + +begin +prog = xine +button = >> +repeat = 3 +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = << +repeat = 3 +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = VOL_UP +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VOL_DOWN +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = >>| +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = |<< +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = GREEN +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = POWER +repeat = 3 +config = Quit +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg new file mode 100644 index 0000000..4d1a5fe Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/gr8zap/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge new file mode 100644 index 0000000..4987807 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircd.conf.hauppauge @@ -0,0 +1,274 @@ +# +# this config file was automatically generated +# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 +# +# contributed by Jens Leuschner +# +# brand: Hauppauge +# model: +# supported devices: WinTV primo; WinTV pci; WinTV radio +# +# This config file will work with both homebrew receivers and +# original Hauppauge TV cards !!! +# + +begin remote + + name Hauppauge + bits 13 + flags SHIFT_ENC + eps 30 + aeps 100 + + one 950 830 + zero 950 830 + plead 960 + gap 89584 + repeat_bit 2 + + begin codes + TV 0x000000000000100F + RADIO 0x000000000000100C + FULL_SCREEN 0x000000000000102E + CH+ 0x0000000000001020 + CH- 0x0000000000001021 + VOL- 0x0000000000001011 + VOL+ 0x0000000000001010 + MUTE 0x000000000000100D + SOURCE 0x0000000000001022 + 1 0x0000000000001001 + 2 0x0000000000001002 + 3 0x0000000000001003 + 4 0x0000000000001004 + 5 0x0000000000001005 + 6 0x0000000000001006 + 7 0x0000000000001007 + 8 0x0000000000001008 + 9 0x0000000000001009 + 0 0x0000000000001000 + RESERVED 0x000000000000101E + MINIMIZE 0x0000000000001026 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 +# +# contributed by +# +# brand: Hauppauge +# model no. of remote control: +# devices being controlled by this remote: PVR 2/350 +# + +begin remote + + name hauppauge_pvr + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Power 0x00000000000017FD + Go 0x00000000000017FB + 1 0x00000000000017C1 + 2 0x00000000000017C2 + 3 0x00000000000017C3 + 4 0x00000000000017C4 + 5 0x00000000000017C5 + 6 0x00000000000017C6 + 7 0x00000000000017C7 + 8 0x00000000000017C8 + 9 0x00000000000017C9 + Back/Exit 0x00000000000017DF + 0 0x00000000000017C0 + Menu 0x00000000000017CD + Red 0x00000000000017CB + Green 0x00000000000017EE + Yellow 0x00000000000017F8 + Blue 0x00000000000017E9 + Ch+ 0x00000000000017E0 + Ch- 0x00000000000017E1 + Vol- 0x00000000000017D1 + Vol+ 0x00000000000017D0 + Ok 0x00000000000017E5 + Mute 0x00000000000017CF + Blank 0x00000000000017CC + Full 0x00000000000017FC + Rewind 0x00000000000017F2 + Play 0x00000000000017F5 + Forward 0x00000000000017F4 + Record 0x00000000000017F7 + Stop 0x00000000000017F6 + Pause 0x00000000000017F0 + Replay 0x00000000000017E4 + Skip 0x00000000000017DE + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 +# +# contributed by +# +# brand: Hauppauge 350 +# Created: G.J. Werler (The Netherlands) +# Project: Mythtv Fedora Pundit-R www.mythtvportal.com +# Date: 2004/11/28 +# model no. of remote control: Hauppauge A415-HPG +# devices being controlled by this remote: PVR-350 +# + +begin remote + + name Hauppauge_350 + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 969 811 + zero 969 811 + plead 1097 + gap 114605 + toggle_bit 2 + + + begin codes + Go 0x00000000000017BB + Power 0x00000000000017BD + TV 0x000000000000179C + Videos 0x0000000000001798 + Music 0x0000000000001799 + Pictures 0x000000000000179A + Guide 0x000000000000179B + Radio 0x000000000000178C + Up 0x0000000000001794 + Left 0x0000000000001796 + Right 0x0000000000001797 + Down 0x0000000000001795 + OK 0x00000000000017A5 + Back/Exit 0x000000000000179F + Menu/i 0x000000000000178D + Vol+ 0x0000000000001790 + Vol- 0x0000000000001791 + Prev.Ch 0x0000000000001792 + Mute 0x000000000000178F + Ch+ 0x00000000000017A0 + Ch- 0x00000000000017A1 + Record 0x00000000000017B7 + Stop 0x00000000000017B6 + Rewind 0x00000000000017B2 + Play 0x00000000000017B5 + Forward 0x00000000000017B4 + Replay/SkipBackward 0x00000000000017A4 + Pause 0x00000000000017B0 + SkipForward 0x000000000000179E + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Asterix 0x000000000000178A + 0 0x0000000000001780 + # 0x000000000000178E + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + end codes + +end remote +# +# this config file was automatically generated +# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 +# +# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at +# members of linux user group Vorarlberg www.lugv.at +# +# for ir remote controler from Hauppauge WinTV Nexus-S +# most of the keys are supported +# +# brand: Hauppauge +# model no. of remote control: WinTV Nexus-S +# devices being controlled by this remote: +# + +begin remote + + name Hauppauge_WinTV_Nexus-S + bits 13 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 944 828 + zero 944 828 + plead 980 + gap 113932 + min_repeat 1 + toggle_bit 2 + + + begin codes + Up 0x0000000000001794 + Down 0x0000000000001795 + Left 0x0000000000001796 + Right 0x0000000000001797 + Power 0x00000000000017BD + Ok 0x00000000000017A5 + Menu 0x000000000000178D + Back 0x000000000000179F + Red 0x000000000000178B + Green 0x00000000000017AE + Yellow 0x00000000000017B8 + Blue 0x00000000000017A9 + 0 0x0000000000001780 + 1 0x0000000000001781 + 2 0x0000000000001782 + 3 0x0000000000001783 + 4 0x0000000000001784 + 5 0x0000000000001785 + 6 0x0000000000001786 + 7 0x0000000000001787 + 8 0x0000000000001788 + 9 0x0000000000001789 + Play 0x00000000000017B5 + Pause 0x00000000000017B0 + Stop 0x00000000000017B6 + Record 0x00000000000017B7 + FastFwd 0x00000000000017B4 + FastRwd 0x00000000000017B2 + Channel+ 0x00000000000017A0 + Channel- 0x00000000000017A1 + Volume+ 0x0000000000001790 + Volume- 0x0000000000001791 + Mute 0x000000000000178F + Timers 0x000000000000178A + Recordings 0x000000000000178E + Back 0x000000000000179F + Record 0x00000000000017B7 + Pause 0x00000000000017B0 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge new file mode 100644 index 0000000..d0f36e8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/lircmd.conf.hauppauge @@ -0,0 +1,33 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * RESERVED + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH+ +MOVE_OUT * CH- + +BUTTON1_TOGGLE * 5 +BUTTON1_TOGGLE * RADIO +BUTTON2_TOGGLE * VOL+ +BUTTON3_TOGGLE * SOURCE + +BUTTON1_CLICK * TV +BUTTON1_CLICK * VOL- +BUTTON3_CLICK * MUTE + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg new file mode 100644 index 0000000..a40a1e8 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/hauppauge/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo new file mode 100644 index 0000000..4b3d95a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/hercules/lircd.conf.smarttv_stereo @@ -0,0 +1,63 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003 +# +# contributed by Dimitris Michail +# +# brand: Hercules +# model no. of remote control: unknown +# devices being controlled by this remote: Hercules SmartTV Stereo +# +# Works with module lirc_i2c, reports PV951 IR + +begin remote + + name HERCULES_SMARTTV_STEREO + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 16 + pre_data 0x61D6 + gap 199964 + toggle_bit 0 + + + begin codes + POWER 0x00000000000048B7 + MUTE 0x000000000000C837 + PREVIEW 0x000000000000F00F + FULLSCREEN 0x00000000000038C7 + AV/TV 0x0000000000008877 + TELETEXT 0x00000000000008F7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + 0 0x00000000000000FF + SNAPSHOT 0x00000000000050AF + 100+ 0x000000000000E817 + CH+ 0x00000000000058A7 + CH- 0x0000000000007887 + VOL+ 0x000000000000D827 + VOL- 0x000000000000F807 + PAUSE 0x000000000000B04F + RECORD 0x000000000000708F + STOP 0x000000000000B847 + PLAY 0x0000000000009867 + TV_REPLAY 0x0000000000006897 + TIME_SHIFT 0x00000000000028D7 + SEEK_BACK 0x00000000000018E7 + SEEK_FWD 0x00000000000030CF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf new file mode 100644 index 0000000..97bbf4c --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircd.conf @@ -0,0 +1,88 @@ +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006 +# +# contributed by M.Brakemeier +# +# brand: SoundGraph +# model no. of remote control: iMON-PAD +# devices being controlled by this remote: +# + +begin remote + + name iMON-PAD + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 235965 + min_repeat 1 + toggle_bit 0 + + begin codes + AppExit 0x288195B7 + Power 0x289115B7 + Record 0x298115B7 + Play 0x2A8115B7 + Open 0x29B1d5B7 + Rewind 0x2A8195B7 + Pause 0x2A9115B7 + FastForward 0x2B8115B7 + PrevChapter 0x2B9115B7 + Stop 0x2B9715B7 + NextChapter 0x298195B7 + Esc 0x2BB715B7 + Eject 0x299395B7 + AppLauncher 0x29B715B7 + MultiMon 0x2AB195B7 + TaskSwitcher 0x2A9395B7 + Mute 0x2B9595B7 + Vol+ 0x28A395B7 + Vol- 0x28A595B7 + Ch+ 0x289395B7 + Ch- 0x288795B7 + Timer 0x2B8395B7 + 1 0x28B595B7 + 2 0x2BB195B7 + 3 0x28B195B7 + 4 0x2A8595B7 + 5 0x299595B7 + 6 0x2AA595B7 + 7 0x2B9395B7 + 8 0x2A8515B7 + 9 0x2AA115B7 + 0 0x2BA595B7 + ShiftTab 0x28B515B7 + Tab 0x29A115B7 + Red 0x2B8515B7 # MyMovie + Green 0x299195B7 # MyMusic + Blue 0x2BA115B7 # MyPhoto + Yellow 0x28A515B7 # MyTV + Bookmark 0x288515B7 + Thumbnail 0x2AB715B7 + AspectRatio 0x29A595B7 + FullScreen 0x2AA395B7 + Purple 0x29A295B7 # MyDVD + Menu 0x2BA385B7 + Caption 0x298595B7 + Language 0x2B8595B7 + MouseKeyboard 0x299115B7 + SelectSpace 0x2A9315B7 + MouseMenu 0x28B715B7 + MouseRightClick 0x688481B7 + Enter 0x28A195B7 + MouseLeftClick 0x688301B7 + WindowsKey 0x2B8195B7 + Backspace 0x28A115B7 + Mouse_N 0x690281B7 + Mouse_S 0x688291B7 + Mouse_W 0x6A8281B7 + Mouse_E 0x688A81B7 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc new file mode 100644 index 0000000..3ad34d8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/lircrc @@ -0,0 +1,240 @@ +################################### +# lircrc config as used by Stev391 June 2007 +# Not all of the buttons are configured yet, only the commonly used buttons +################################### + +# Escape +begin + prog = mythtv + button = AppExit + config = Esc + repeat = 3 +end + +# Escape Key 2 +begin + prog = mythtv + button = Esc + config = Esc +end + +# Channel Up +begin + prog = mythtv + button = Ch+ + config = Up + repeat = 3 +end + +# Channel Down +begin + prog = mythtv + button = Ch- + config = Down + repeat = 3 +end + +# Volume Up +begin + prog = mythtv + button = Vol+ + repeat = 3 + config = Right +end + +# Volume Down +begin + prog = mythtv + button = Vol- + repeat = 3 + config = Left +end + +# Enter/Return +begin + prog = mythtv + button = Enter + config = Return +end + +# Menu Button +begin + prog = mythtv + button = Menu + config = M +end + +# Mute +begin + prog = mythtv + button = Mute + config = F9 +end + +# Rewind +begin + prog = mythtv + button = Rewind + config = PgUp +end + +# Fast Forward +begin + prog = mythtv + button = FastForward + config = PgDown +end + +# Play +begin + prog = mythtv + button = Play + config = P +end + +# Pause +begin + prog = mythtv + button = Pause + config = P +end + +# Record +begin + prog = mythtv + button = Record + config = R +end + +# Stop +begin + prog = mythtv + button = Stop + config = O +end + +# Previous Track/Chapter +begin + prog = mythtv + button = PrevChapter + config = Home +end + +# Next Track/Chapter +begin + prog = mythtv + button = NextChapter + config = End +end + +# Jump Point to MythVideo +begin + prog = mythtv + button = MyMovie + config = F12 +end + +# Jump Point to MythMusic +begin + prog = mythtv + button = MyMusic + config = F11 +end + +# Jump Point to LiveTV +begin + prog = mythtv + button = MyTV + config = F10 +end + +# Jump Point to Main Menu +begin + prog = mythtv + button = Multimon + config = F2 +end + +# Jump Point to Myth Gallery +begin + prog = mythtv + button = MyPhoto + config = F3 +end + +# Jump Point to Play DVD +begin + prog = mythtv + button = MyDVD + config = F4 +end + +# Display Information +begin + prog = mythtv + button = Caption + config = I +end + +############################## +# Numbers +############################## +begin + prog = mythtv + button = 0 + config = 0 +end + +begin + prog = mythtv + button = 1 + config = 1 +end + +begin + prog = mythtv + button = 2 + config = 2 +end + +begin + prog = mythtv + button = 3 + config = 3 +end + +begin + prog = mythtv + button = 4 + config = 4 +end + +begin + prog = mythtv + button = 5 + config = 5 +end + +begin + prog = mythtv + button = 6 + config = 6 +end + +begin + prog = mythtv + button = 7 + config = 7 +end + +begin + prog = mythtv + button = 8 + config = 8 +end + +begin + prog = mythtv + button = 9 + config = 9 +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/imon-pad/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon new file mode 100644 index 0000000..6875f3f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon @@ -0,0 +1,79 @@ +# +# contributed by Venky Raju (dev@venky.ws) +# +# brand: Soundgraph +# model no. of remote control: iMON MultiMedian +# +# devices being controlled by this remote: HTPC +# + +begin remote + + name IMON_MultiMedian + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 130 + + header 9000 4500 + one 625 1625 + zero 625 375 + ptrail 625 + repeat 8875 2125 + pre_data_bits 16 + pre_data 0x609F + gap 100000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + App.Exit 0x00000000000000FF + Power 0x000000000000807F + 1 0x00000000000040BF + 2 0x000000000000C03F + 3 0x00000000000020DF + 4 0x000000000000A05F + 5 0x000000000000609F + 6 0x000000000000E01F + 7 0x00000000000010EF + 8 0x000000000000906F + 9 0x00000000000050AF + 0 0x000000000000D02F + Windows 0x00000000000030CF + Menu 0x000000000000B04F + App.Launcher 0x000000000000708F + Function 0x000000000000F00F + Task.Switcher 0x00000000000008F7 + Back 0x0000000000008877 + Select 0x00000000000048B7 + Eject 0x0000000000009867 + Delete 0x00000000000018E7 + Up 0x000000000000C837 + Right 0x0000000000006897 + Down 0x000000000000E817 + Left 0x00000000000028D7 + Enter 0x000000000000A857 + Vol- 0x00000000000058A7 + Vol+ 0x000000000000D827 + Mute 0x00000000000038C7 + Play 0x000000000000B847 + Pause 0x0000000000007887 + Prev 0x000000000000F807 + Next 0x00000000000002FD + Rew 0x000000000000827D + Fwd 0x00000000000042BD + Stop 0x000000000000C23D + Open 0x00000000000022DD + Rec 0x000000000000A25D + Bookmark 0x000000000000629D + Thumbnail 0x000000000000E21D + Aspect 0x00000000000012ED + DVD.Menu 0x000000000000926D + DVD.Caption 0x00000000000052AD + DVD.Language 0x000000000000D22D + Full.Screen 0x00000000000032CD + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad new file mode 100644 index 0000000..e8b8818 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-pad @@ -0,0 +1,84 @@ +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005 +# +# contributed by Venky Raju +# +# brand: iMON-New +# model no. of remote control: iMON-PAD +# devices being controlled by this remote: +# + +begin remote + + name iMON-PAD + bits 32 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 235965 + min_repeat 1 + toggle_bit 0 + + + begin codes + AppExit 0x288195B7 + Record 0x298115B7 + Play 0x2A8115B7 + SlowMotion 0x29B195B7 + Rewind 0x2A8195B7 + Pause 0x2A9115B7 + FastForward 0x2B8115B7 + PrevChapter 0x2B9115B7 + Stop 0x2B9715B7 + NextChapter 0x298195B7 + Esc 0x2BB715B7 + Eject 0x299395B7 + AppLauncher 0x29B715B7 + MultiMon 0x2AB195B7 + TaskSwitcher 0x2A9395B7 + Mute 0x2B9595B7 + Vol+ 0x28A395B7 + Vol- 0x28A595B7 + Ch+ 0x289395B7 + Ch- 0x288795B7 + Timer 0x2B8395B7 + 1 0x28B595B7 + 2 0x2BB195B7 + 3 0x28B195B7 + 4 0x2A8595B7 + 5 0x299595B7 + 6 0x2AA595B7 + 7 0x2B9395B7 + 8 0x2A8515B7 + 9 0x2AA115B7 + 0 0x2BA595B7 + ShiftTab 0x28B515B7 + Tab 0x29A115B7 + MyMovie 0x2B8515B7 + MyMusic 0x299195B7 + MyPhoto 0x2BA115B7 + MyTV 0x28A515B7 + Bookmark 0x288515B7 + Thumbnail 0x2AB715B7 + AspectRatio 0x29A595B7 + FullScreen 0x2AA395B7 + MyDVD 0x29A295B7 + Menu 0x2BA385B7 + Caption 0x298595B7 + Language 0x2B8595B7 + MouseKeyboard 0x299115B7 + SelectSpace 0x2A9315B7 + MouseMenu 0x28B715B7 + MouseRightClick 0x688481B7 + Enter 0x28A195B7 + MouseLeftClick 0x688301B7 + WindowsKey 0x2B8195B7 + Backspace 0x28A115B7 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc new file mode 100644 index 0000000..cf6d2fc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/imon/lircd.conf.imon-rsc @@ -0,0 +1,109 @@ +# +# contributed by Venky Raju (dev@venky.ws) +# +# brand: Soundgraph +# model no. of remote control: iMON RSC +# +# devices being controlled by this remote: HTPC +# +# Credit: Changwoo Ryu +# +begin remote + + name IMON_RSC + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 130 + + header 9000 4500 + one 625 1625 + zero 625 375 + ptrail 625 + repeat 8875 2125 + pre_data_bits 16 + pre_data 0x0108 + + gap 100000 + + begin codes + App.Exit 0x00000000000008F7 + Power 0x000000000000F40B + ScreenSaver 0x00000000000052AD + Timer 0x000000000000926D + 1 0x0000000000002AD5 + 2 0x000000000000AA55 + 3 0x0000000000006A95 + 4 0x000000000000EA15 + 5 0x0000000000001AE5 + 6 0x0000000000009A65 + 7 0x0000000000005AA5 + 8 0x000000000000DA25 + 9 0x0000000000003AC5 + 0 0x000000000000BA45 + Desktop 0x000000000000817E + Max/Res 0x00000000000041BE + Esc 0x00000000000012ED + Windows 0x000000000000D22D + Menu 0x000000000000C13E + App.Launcher 0x000000000000A25D + Function 0x00000000000021DE + Task.Switcher 0x000000000000629D + Backspace 0x000000000000A15E + Mouse/Keyboard 0x000000000000619E + Space 0x000000000000E11E + Shift.Tab 0x0000000000007887 + Enter 0x00000000000019E6 + Tab 0x000000000000F807 + L.Click 0x000000000000d827 + DragNDrop 0x0000000000006897 + R.Click 0x000000000000b847 + Mute 0x00000000000011ee + Vol- 0x0000000000007a85 + Vol+ 0x000000000000fa05 + Play 0x00000000000032cd + Pause 0x000000000000b24d + Open 0x000000000000f20d + Prev 0x0000000000000af5 + Next 0x0000000000008a75 + Stop 0x000000000000728d + Rew 0x0000000000004ab5 + F.Fwd 0x000000000000ca35 + Full.Screen 0x000000000000916e + end codes + +end remote + +begin remote + + name IMON_RSC_STICK + bits 4 + flags SPACE_ENC + eps 40 + aeps 130 + + header 2125 1875 + one 625 1625 + zero 625 375 + ptrail 625 + + begin codes + STICK_N 0x0 + STICK_S 0x1 + STICK_E 0x2 + STICK_W 0x3 + STICK_NE 0x4 + STICK_SW 0x5 + STICK_SE 0x6 + STICK_NW 0x7 + STICK_NNE 0x8 + STICK_SSW 0x9 + STICK_SEE 0xa + STICK_NWW 0xb + STICK_NEE 0xc + STICK_SWW 0xd + STICK_SSE 0xe + STICK_NNW 0xf + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci new file mode 100644 index 0000000..076d032 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/iodata/lircd.conf.gvbctv5pci @@ -0,0 +1,68 @@ +# +# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI +# +# this config file was automatically generated +# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003 +# +# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org) +# +# brand: I-O Data Co. +# model: GV-BCTV5/PCI +# supported devices: This remote control comes with the TV Tuner card +# GV-BCTV5/PCI from I-O Data Co. (Japan) +# + +begin remote + + name GV-BCTV5/PCI + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 149949 + toggle_bit 0 + + + begin codes + TV 0x0000000000000042 + FM 0x0000000000000022 + EPG 0x0000000000000062 + POWER 0x0000000000000002 + 1 0x0000000000000052 + 2 0x0000000000000032 + 3 0x0000000000000072 + 4 0x000000000000004A + 5 0x000000000000002A + 6 0x000000000000006A + 7 0x000000000000005A + 8 0x000000000000003A + 9 0x000000000000007A + 10 0x0000000000000046 + 11 0x0000000000000026 + 12 0x0000000000000066 + LIVE 0x0000000000000012 + TIME_SHIFT 0x000000000000000A + PLAY 0x000000000000001A + MULTI 0x0000000000000006 + VIDEO 0x0000000000000056 + SVIDEO 0x000000000000004E + CHANNEL_PLUS 0x0000000000000036 + CHANNEL_MINUS 0x000000000000002E + VOLUME_PLUS 0x0000000000000076 + VOLUME_MINUS 0x000000000000006E + MUTE 0x0000000000000016 + PICTURE_SIZE 0x000000000000000E + PAUSE 0x000000000000005E + HALT 0x000000000000003E + RECORD 0x000000000000007E + STOP 0x000000000000001E + REWIND 0x0000000000000043 + START 0x0000000000000023 + FORWARD 0x0000000000000063 + SYNC 0x0000000000000003 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/km_ready_preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one new file mode 100644 index 0000000..b962433 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/knc_one/lircd.conf.knc_one @@ -0,0 +1,62 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001 +# +# contributed by Ulrich Mueller +# +# brand: KNC ONE +# model: TV Station (-/SE/PRO/RDS) +# +# brand: Anubis +# model: Typhoon TView Tuner (-/Stereo/RDS) +# + +begin remote + + name lircd.conf + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 199992 + toggle_bit 0 + + + begin codes + TV/FM 0x000000000000001C + OK 0x0000000000000015 + F1 0x000000000000000B + POWER 0x0000000000000012 + AV/TV 0x0000000000000011 + TELETEXT 0x000000000000000F + FULLSCREEN 0x0000000000000013 + MUTE 0x0000000000000010 + 1 0x0000000000000001 + 2 0x0000000000000002 + 3 0x0000000000000003 + 4 0x0000000000000004 + 5 0x0000000000000005 + 6 0x0000000000000006 + 7 0x0000000000000007 + 8 0x0000000000000008 + 9 0x0000000000000009 + 0 0x0000000000000000 + CH+ 0x000000000000001A + CH- 0x000000000000001E + VOL+ 0x000000000000001B + VOL- 0x000000000000001F + SNAPSHOT 0x000000000000000A + 100+ 0x0000000000000017 + RECORD 0x000000000000000D + PAUSE 0x000000000000000E + PLAY 0x000000000000001D + STOP 0x0000000000000019 + MENU 0x0000000000000016 + ESC 0x0000000000000014 + - 0x0000000000000018 + + 0x000000000000000C + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld new file mode 100644 index 0000000..280c47d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/kworld/lircd.conf.kworld @@ -0,0 +1,144 @@ +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name kworld-878 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + power 0x0000000000007887 + source 0x000000000000E01F + scan 0x00000000000038C7 + mute 0x00000000000018E7 + tv/fm 0x000000000000C03F + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + fm_scan+ 0x000000000000F807 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + fm_scan- 0x000000000000E817 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + fm_freq+ 0x00000000000030CF + 0 0x00000000000040BF + + 0x00000000000008F7 + recall 0x000000000000C837 + fm-freq- 0x00000000000020DF + record 0x00000000000000FF + stop 0x00000000000010EF + play 0x0000000000008877 + minimze 0x000000000000F00F + ch+ 0x000000000000F807 + zoom 0x0000000000009867 + vol- 0x00000000000028D7 + ch- 0x000000000000E817 + vol+ 0x0000000000006897 + snapshot 0x00000000000058A7 + mts 0x000000000000B04F + function- 0x00000000000020DF + function 0x000000000000708F + function+ 0x00000000000030CF + reset 0x000000000000B847 + end codes + +end remote + + +# +# this config file was automatically generated +# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 +# +# contributed by Denes Balatoni +# Modified by Daniel Foote to +# work with remote that came with DVB-T card. +# +# brand: kworld +# model no. of remote control: ? +# devices being controlled by this remote: tv878r tuner card +# + +begin remote + + name KWorld_DVB-T + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 8853 4526 + one 533 1713 + zero 533 589 + ptrail 531 + repeat 8853 2281 + pre_data_bits 16 + pre_data 0x61D6 + gap 107839 + toggle_bit 0 + + + begin codes + ch- 0x0000000000007887 + 7 0x000000000000E01F + preview 0x00000000000038C7 + zoom 0x00000000000018E7 + 3 0x000000000000C03F + 1 0x000000000000807F + epg 0x000000000000D02F + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + 5 0x000000000000A05F + 9 0x000000000000906F + reset 0x000000000000A857 + turnleft 0x000000000000E817 + 6 0x000000000000609F + 0 0x00000000000050AF + power 0x00000000000048B7 + scan 0x00000000000030CF + 2 0x00000000000040BF + mute 0x00000000000008F7 + snap 0x000000000000C837 + 4 0x00000000000020DF + turnup 0x00000000000000FF + 8 0x00000000000010EF + backward 0x0000000000008877 + source 0x000000000000F00F + forward 0x0000000000009867 + pip 0x00000000000028D7 + ch- 0x000000000000E817 + play 0x0000000000006897 + ch+ 0x00000000000058A7 + stop 0x000000000000B04F + function- 0x00000000000020DF + pause 0x000000000000708F + function+ 0x00000000000030CF + rec 0x000000000000B847 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 new file mode 100644 index 0000000..3adfd4b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.PVR2000 @@ -0,0 +1,75 @@ +# +# this config file was written on Mon Dec 13 23:51:16 MET 2004 +# by Thomas Reitmayr (treitmayr@yahoo.com) +# +# brand: Leadtek +# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a +# limitation of the remote control. +# + + +begin remote + + name PVR2000 + bits 8 + flags SHIFT_ENC + gap 120000 + + begin codes + POWER 0x0000000000000070 + TV 0x0000000000000026 + FM 0x0000000000000027 + DVD 0x0000000000000028 + RED 0x000000000000003B + GREEN 0x000000000000003C + YELLOW 0x000000000000003D + BLUE 0x000000000000003E + TELETEXT 0x000000000000006F + SLEEP 0x0000000000000030 + MUTE 0x0000000000000064 + BOSS_KEY 0x0000000000000039 + CH_UP 0x000000000000007C + CH_DOWN 0x0000000000000060 + VOL_DOWN 0x0000000000000078 + VOL_UP 0x0000000000000074 + ENTER 0x0000000000000063 + CC 0x0000000000000020 + FULLSCREEN 0x0000000000000073 + MENU 0x000000000000003F + SCAN 0x0000000000000021 + REPLAY 0x0000000000000032 + PLAY 0x0000000000000033 + SKIP 0x0000000000000034 + OSD 0x0000000000000022 + BACK 0x0000000000000024 + STOP 0x0000000000000036 + FORWARD 0x0000000000000025 + LANGUAGE 0x0000000000000023 + 1 0x0000000000000075 + 2 0x0000000000000076 + 3 0x0000000000000077 + 4 0x0000000000000079 + 5 0x000000000000007A + 6 0x000000000000007B + 7 0x000000000000007D + 8 0x000000000000007E + 9 0x000000000000007F + 0 0x0000000000000062 + . 0x0000000000000031 + RECALL 0x0000000000000061 + VIDEO 0x000000000000006E + AUDIO 0x000000000000006B + DISPLAY 0x0000000000000066 + SNAPSHOT 0x0000000000000038 + PIP 0x000000000000003A + RECSTOP 0x0000000000000036 + REC 0x0000000000000037 + TIMESHIFT 0x0000000000000035 + + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 new file mode 100644 index 0000000..47e5b8e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0007 @@ -0,0 +1,86 @@ +# Made by Leandro Lucarella +# +# brand: Leadtek +# model: RM-0007 (bundeled with WinView 601TV card) +# +# Based on Winfast TV200: +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# modifications based on the config files from +# Juan Toledo and +# Markus Lischka +# +# With some modification based on a patch for WinView 601 made by +# Juan FC. +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + +begin remote + + name RM-0007 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 629 1617 + zero 629 495 + ptrail 632 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes +# 1st row of buttons + POWER 0x00000000000000FF + MENU 0x000000000000807F + FM 0x00000000000040BF + PC/TV 0x000000000000C03F +# volume/channel + VOL_UP 0x00000000000020DF + VOL_DOWN 0x00000000000010EF + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 +# numbers pad + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + RETURN 0x0000000000008877 + 0 0x00000000000048B7 + DISPLAY 0x000000000000C837 +# unknown icon buttons + HELP 0x00000000000038C7 + SCAN 0x000000000000A857 + OSD 0x0000000000006897 + OPTIONS 0x000000000000E817 +# labeled buttons + MUTE 0x00000000000028D7 + MTS 0x000000000000D827 + VIDEO 0x0000000000007887 + CC 0x000000000000F807 +# color dots buttons + RED 0x00000000000018E7 + GREEN 0x0000000000009867 + YELLOW 0x00000000000058A7 + BLUE 0x000000000000B847 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 new file mode 100644 index 0000000..e0efcba --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircd.conf.RM-0010 @@ -0,0 +1,101 @@ +# +# this config file was automatically generated +# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002 +# +# modified by CB +# +# contributed by Erik Christiansson, aka Sci +# www.alphafish.com +# erik@alphafish.com +# +# brand: Leadtek +# model: RM-0010 (bundeled with TV2000 TV-card) +# +# modifications based on the config files from +# Juan Toledo and +# Markus Lischka +# Reza Naima +# +# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to +# be a hardware limitation. +# + + +begin remote + + name RM-0010 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 40 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + pre_data_bits 16 + pre_data 0xC03F + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + POWER 0x00000000000000FF + TV/FM 0x00000000000040BF + SCAN 0x000000000000A857 + DISPLAY 0x0000000000006897 + 1 0x000000000000A05F + 2 0x000000000000609F + 3 0x000000000000E01F + 4 0x000000000000906F + 5 0x00000000000050AF + 6 0x000000000000D02F + 7 0x000000000000B04F + 8 0x000000000000708F + 9 0x000000000000F00F + 0 0x00000000000048B7 + RECALL 0x0000000000008877 + ENTER 0x000000000000C837 + CC 0x000000000000F807 + MTS 0x000000000000D827 + FINE_DOWN 0x0000000000009867 + FINE_UP 0x00000000000018E7 + VIDEO 0x0000000000007887 + MUTE 0x00000000000028D7 + CH_UP 0x00000000000030CF + CH_DOWN 0x00000000000008F7 + VOL_DOWN 0x00000000000010EF + VOL_UP 0x00000000000020DF + FULLSCREEN 0x000000000000C03F + +# The following are only supported by the remote control bundled with +# the WinFast TV 2000 XP Deluxe card. + + SLEEP 0x00000000000002FD + BOSS_KEY 0x000000000000926D + RED 0x000000000000D22D + GREEN 0x00000000000032CD + YELLOW 0x000000000000B24D + BLUE 0x000000000000728D + PIP 0x00000000000052AD + . 0x000000000000827D + BACK 0x00000000000042BD + PLAY 0x000000000000C23D + NEXT 0x00000000000022DD + TIMESHIFT 0x000000000000A25D + STOP 0x000000000000629D + REC 0x000000000000E21D + SNAPSHOT 0x00000000000012ED + +# Only found on CoolCommand remote + + REPEAT 0x000000000000884B + TELETEXT 0x000000000000F807 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 new file mode 100644 index 0000000..ef1992a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0007 @@ -0,0 +1,36 @@ +# +# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control). +# +# Made by Leandro Lucarella based on mainstream lirc +# Leadtek WinFast2000TV (RM-0010 remote control). +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * BLUE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_IN * CH_UP +MOVE_OUT * CH_DOWN + +BUTTON1_TOGGLE * RETURN +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * DISPLAY + +BUTTON1_CLICK * MENU +BUTTON1_CLICK * 5 +BUTTON2_CLICK * FM +BUTTON3_CLICK * PC/TV + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 new file mode 100644 index 0000000..ce0eff4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/leadtek/lircmd.conf.RM-0010 @@ -0,0 +1,36 @@ +# +# lircmd config file +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 2 30 5 + +ACTIVATE * SCAN + +MOVE_N * 2 +MOVE_N * CH_UP +MOVE_NE * 3 +MOVE_E * 6 +MOVE_E * VOL_UP +MOVE_SE * 9 +MOVE_S * 8 +MOVE_S * CH_DOWN +MOVE_SW * 7 +MOVE_W * 4 +MOVE_W * VOL_DOWN +MOVE_NW * 1 +MOVE_IN * VIDEO +MOVE_OUT * MUTE + +BUTTON1_TOGGLE * RECALL +BUTTON2_TOGGLE * 0 +BUTTON3_TOGGLE * ENTER + +BUTTON1_CLICK * FULLSCREEN +BUTTON2_CLICK * FINE_DOWN +BUTTON3_CLICK * FINE_UP + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo new file mode 100644 index 0000000..6402ed0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircd.conf.flyvideo @@ -0,0 +1,87 @@ +# +# this config file was automatically generated +# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002 +# +# contributed by Jarek Zuk +# +# brand: LiveView +# devices being controlled by this remote: +# FlyVideo II +# FlyVideo'98 +# FlyVideo 98/FM /2000S +# Flyvideo 98FM (LR50Q) +# Typhoon TView TV/FM Tuner +# + +begin remote + + name flyvideo + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 4500 + pre_data_bits 26 + pre_data 0x01A1F2F + gap 108000 + toggle_bit 0 + + frequency 37916 + duty_cycle 33 + + begin codes + 0 0x000000000000F00F + 1 0x000000000000C03F + 2 0x00000000000020DF + 3 0x000000000000A05F + 4 0x000000000000E01F + 5 0x00000000000010EF + 6 0x000000000000906F + 7 0x000000000000D02F + 8 0x00000000000030CF + 9 0x000000000000B04F + POWER 0x00000000000000FF + MOUSE_MODE 0x000000000000807F + FULL_SCREEN 0x00000000000040BF + CHAN_PLUS 0x00000000000048B7 + CHAN_MINUS 0x000000000000C837 + CANCEL 0x000000000000F807 + ENTER 0x00000000000008F7 + VOL_PLUS 0x00000000000028D7 + VOL_MINUS 0x000000000000E817 + MENU 0x000000000000609F + UP 0x000000000000708F + DOWN 0x0000000000009867 + LEFT 0x000000000000609F + RIGHT 0x000000000000A857 + INC 0x00000000000050AF + DEC 0x0000000000006897 + ESC 0x00000000000058A7 + MUTE 0x000000000000D827 + RETURN 0x00000000000018E7 + CENTER 0x000000000000C837 + + CHANELS 0x00000000000047B8 + REV 0x0000000000008778 + FWD 0x000000000000C738 + VIDEO 0x0000000000008877 + +# from FlyVideo II config file + Audio 0x000000000000A857 +# newly added by Jarek Zuk + SQUARE 0x000000000000B847 + TAB_LEFT 0x0000000000007887 + TAB_RIGHT 0x00000000000038C7 + CENTER 0x000000000000C837 + LEFT 0x00000000000048B7 + + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo new file mode 100644 index 0000000..71cac36 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircmd.conf.flyvideo @@ -0,0 +1,33 @@ +# +# lircmd config file for FlyVideo98 remote control +# Contributed by Pawel T. Jochym +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +#ACCELERATOR 2 30 5 + +ACTIVATE * MOUSE_MODE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_PLUS +MOVE_OUT * VOL_MINUS + +BUTTON1_CLICK * CANCEL +BUTTON2_CLICK * 0 +BUTTON3_CLICK * ENTER + +BUTTON1_TOGGLE * UP +BUTTON2_TOGGLE * VIDEO +BUTTON3_TOGGLE * INC diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo new file mode 100644 index 0000000..2175201 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/life-view/lircrc.flyvideo @@ -0,0 +1,131 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Pawel T. Jochym +# +begin + button = MOUSE_MODE + mode = mouse +end +begin + prog = irexec + button = FULL_SCREEN + config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 & + mode = tv + flags = once +end +begin + button = ESC + mode = system + flags = once +end +begin system + begin + prog = irexec + button = 1 + button = 2 + button = 3 + button = 6 + button = 3 + button = 6 + config = shutdown -r now + flags = mode + end +end system + +begin tv + begin + prog = irxevent + button = POWER + config = Key q xawtv + flags = mode + end + begin + prog = irxevent + button = FULL_SCREEN + config = Key f xawtv + config = Key f xawtv + repeat = 1 + end + begin + prog = irxevent + button = CHAN_MINUS + repeat = 1 + config = Key Page_Down xawtv + end + begin + prog = irxevent + button = CHAN_PLUS + repeat = 1 + config = Key Page_Up xawtv + end + begin + prog = irxevent + button = MENU + repeat = 1 + config = Key c xawtv + end + begin + prog = irxevent + button = CHANELS + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = irxevent + button = MUTE + config = Key Return xawtv + end + begin + prog = irxevent + button = VOL_PLUS + repeat = 1 + config = Key KP_Add xawtv + end + begin + prog = irxevent + button = VOL_MINUS + repeat = 1 + config = Key KP_Subtract xawtv + end + begin + prog = irexec + button = 1 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = 2 + config = xawtv-remote setstation 1 + end + begin + prog = irexec + button = 3 + config = xawtv-remote setstation 2 + end + begin + prog = irexec + button = 4 + config = xawtv-remote setstation 3 + end + begin + prog = irexec + button = 5 + config = xawtv-remote setstation 4 + end + begin + prog = irexec + button = 6 + config = xawtv-remote setstation 5 + end + begin + prog = irexec + button = 7 + config = xawtv-remote setstation 6 + end + begin + prog = irexec + button = 8 + config = xawtv-remote setstation 7 + end +end tv \ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/life-view/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech new file mode 100644 index 0000000..1960b6f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircd.conf.logitech @@ -0,0 +1,111 @@ +# +# +# contributed by Isaac Lauer +# +# brand: Logitech +# model: Value Infrared Remote Control +# supported devices: +# + +begin remote + + name Logitech + bits 8 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 8 + pre_data 0xA0 + gap 29858 + repeat_bit 0 + + begin codes + POWER 0x0000000000000002 + 1 0x0000000000000015 + 2 0x0000000000000016 + 3 0x0000000000000014 + 4 0x0000000000000018 + 5 0x0000000000000019 + 6 0x0000000000000017 + 7 0x000000000000001C + 8 0x000000000000001B + 9 0x000000000000001A + 0 0x000000000000001D + PAUSE 0x0000000000000013 + EJECT 0x0000000000000011 + SEEK- 0x000000000000000E + PLAY 0x000000000000000F + SEEK+ 0x0000000000000010 + STOP 0x0000000000000012 + HELP 0x0000000000000001 + CH- 0x000000000000000D + CH+ 0x000000000000000A + VOL- 0x000000000000000C + VOL+ 0x0000000000000009 + * 0x000000000000001F + # 0x000000000000001E + MUTE 0x000000000000000B + BUTTONL_DOWN 0x0000000000000039 + BUTTONR_DOWN 0x000000000000003A + BUTTON_UP 0x0000000000000038 + ENTER 0x0000000000000008 + CLOSE 0x0000000000000023 + TV 0x0000000000000004 + GDE 0x0000000000000005 + CD 0x0000000000000006 + MSG 0x0000000000000007 + PHONE 0x0000000000000003 + MOUSE_N 0x0000000000000040 + MOUSE_NNE 0x0000000000000041 + MOUSE_NE 0x0000000000000042 + MOUSE_NEE 0x0000000000000043 + MOUSE_E 0x0000000000000044 + MOUSE_SEE 0x0000000000000045 + MOUSE_SE 0x0000000000000046 + MOUSE_SSE 0x0000000000000047 + MOUSE_S 0x0000000000000048 + MOUSE_SSW 0x0000000000000049 + MOUSE_SW 0x000000000000004A + MOUSE_SWW 0x000000000000004B + MOUSE_W 0x000000000000004C + MOUSE_NWW 0x000000000000004D + MOUSE_NW 0x000000000000004E + MOUSE_NNW 0x000000000000004F + MOUSE_N 0x0000000000000050 + MOUSE_NNE 0x0000000000000051 + MOUSE_NE 0x0000000000000052 + MOUSE_NEE 0x0000000000000053 + MOUSE_E 0x0000000000000054 + MOUSE_SEE 0x0000000000000055 + MOUSE_SE 0x0000000000000056 + MOUSE_SSE 0x0000000000000057 + MOUSE_S 0x0000000000000058 + MOUSE_SSW 0x0000000000000059 + MOUSE_SW 0x000000000000005A + MOUSE_SWW 0x000000000000005B + MOUSE_W 0x000000000000005C + MOUSE_NWW 0x000000000000005D + MOUSE_NW 0x000000000000005E + MOUSE_NNW 0x000000000000005F + MOUSE_N 0x0000000000000060 + MOUSE_NNE 0x0000000000000061 + MOUSE_NE 0x0000000000000062 + MOUSE_NEE 0x0000000000000063 + MOUSE_E 0x0000000000000064 + MOUSE_SEE 0x0000000000000065 + MOUSE_SE 0x0000000000000066 + MOUSE_SSE 0x0000000000000067 + MOUSE_S 0x0000000000000068 + MOUSE_SSW 0x0000000000000069 + MOUSE_SW 0x000000000000006A + MOUSE_SWW 0x000000000000006B + MOUSE_W 0x000000000000006C + MOUSE_NWW 0x000000000000006D + MOUSE_NW 0x000000000000006E + MOUSE_NWW 0x000000000000006F + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech new file mode 100644 index 0000000..d8067f5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/logitech/lircmd.conf.logitech @@ -0,0 +1,64 @@ +# +# lircmd config file for the Logitech control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + +MOVE_N Logitech MOUSE_N +MOVE_N Logitech MOUSE_N + +MOVE_N Logitech MOUSE_NNE +MOVE_NE Logitech MOUSE_NNE + +MOVE_NE Logitech MOUSE_NE +MOVE_NE Logitech MOUSE_NE + +MOVE_E Logitech MOUSE_NEE +MOVE_NE Logitech MOUSE_NEE + +MOVE_E Logitech MOUSE_E +MOVE_E Logitech MOUSE_E + +MOVE_E Logitech MOUSE_SEE +MOVE_SE Logitech MOUSE_SEE + +MOVE_SE Logitech MOUSE_SE +MOVE_SE Logitech MOUSE_SE + +MOVE_S Logitech MOUSE_SSE +MOVE_SE Logitech MOUSE_SSE + +MOVE_S Logitech MOUSE_S +MOVE_S Logitech MOUSE_S + +MOVE_S Logitech MOUSE_SSW +MOVE_SW Logitech MOUSE_SSW + +MOVE_SW Logitech MOUSE_SW +MOVE_SW Logitech MOUSE_SW + +MOVE_W Logitech MOUSE_SWW +MOVE_SW Logitech MOUSE_SWW + +MOVE_W Logitech MOUSE_W +MOVE_W Logitech MOUSE_W + +MOVE_W Logitech MOUSE_NWW +MOVE_NW Logitech MOUSE_NWW + +MOVE_NW Logitech MOUSE_NW +MOVE_NW Logitech MOUSE_NW + +MOVE_N Logitech MOUSE_NNW +MOVE_NW Logitech MOUSE_NNW + +BUTTON1_DOWN Logitech BUTTONL_DOWN +BUTTON2_DOWN Logitech BUTTONR_DOWN + +BUTTON1_UP Logitech BUTTON_UP +BUTTON2_UP Logitech BUTTON_UP diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf new file mode 100644 index 0000000..ec3b73e --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd-mceusb.conf @@ -0,0 +1,88 @@ +# +# RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips +# +######### +# +# Philips Media Center Edition remote control +# For use with the USB MCE ir receiver +# +# Dan Conti dconti|acm.wwu.edu +# +# Radio, Print, RecTV are only available on the HP Media Center remote control +# + +begin remote + + name mceusb + bits 16 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 21 + pre_data 0x37FF0 + gap 105000 + toggle_bit 22 + rc6_mask 0x100000000 + + + begin codes + +# starts at af + Radio 0x00007baf + Print 0x00007bb1 + Videos 0x00007bb5 + Pictures 0x00007bb6 + RecTV 0x00007bb7 + Music 0x00007bb8 + TV 0x00007bb9 +# no ba - d8 + Guide 0x00007bd9 + LiveTV 0x00007bda + DVD 0x00007bdb + Back 0x00007bdc + OK 0x00007bdd + Right 0x00007bde + Left 0x00007bdf + Down 0x00007be0 + Up 0x00007be1 +# no e2,e3 + Replay 0x00007be4 + Skip 0x00007be5 + Stop 0x00007be6 + Pause 0x00007be7 + Record 0x00007be8 + Play 0x00007be9 + Rewind 0x00007bea + Forward 0x00007beb + ChanDown 0x00007bec + ChanUp 0x00007bed + VolDown 0x00007bee + VolUp 0x00007bef + More 0x00007bf0 + Mute 0x00007bf1 + Home 0x00007bf2 + Power 0x00007bf3 + Enter 0x00007bf4 + Clear 0x00007bf5 + Nine 0x00007bf6 + Eight 0x00007bf7 + Seven 0x00007bf8 + Six 0x00007bf9 + Five 0x00007bfa + Four 0x00007bfb + Three 0x00007bfc + Two 0x00007bfd + One 0x00007bfe + Zero 0x00007bff + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb new file mode 100644 index 0000000..041c2cb --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircd.conf.mceusb @@ -0,0 +1,104 @@ +# +# RC-6 config file +# +# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm +# http://home.hccnet.nl/m.majoor/pronto.pdf +# +# used by: Philips +# +######### +# +# Philips Media Center Edition remote control +# For use with the USB MCE ir receiver +# +# Dan Conti dconti|acm.wwu.edu +# +# Updated with codes for MCE 2005 Remote additional buttons +# *, #, Teletext, Red, Green, Yellow & Blue Buttons +# Note: TV power button transmits no code until programmed. +# Updated 12th September 2005 +# Graham Auld - mce|graham.auld.me.uk +# +# Radio, Print, RecTV are only available on the HP Media Center remote control +# + +begin remote + + name mceusb + bits 16 + flags RC6|CONST_LENGTH + eps 30 + aeps 100 + + header 2667 889 + one 444 444 + zero 444 444 + pre_data_bits 21 + pre_data 0x37FF0 + gap 105000 + toggle_bit 22 + rc6_mask 0x100000000 + + + begin codes + + Blue 0x00007ba1 + Yellow 0x00007ba2 + Green 0x00007ba3 + Red 0x00007ba4 + Teletext 0x00007ba5 + +# starts at af + Radio 0x00007baf + Print 0x00007bb1 + Videos 0x00007bb5 + Pictures 0x00007bb6 + RecTV 0x00007bb7 + Music 0x00007bb8 + TV 0x00007bb9 +# no ba - d8 + + Guide 0x00007bd9 + LiveTV 0x00007bda + DVD 0x00007bdb + Back 0x00007bdc + OK 0x00007bdd + Right 0x00007bde + Left 0x00007bdf + Down 0x00007be0 + Up 0x00007be1 + + Star 0x00007be2 + Hash 0x00007be3 + + Replay 0x00007be4 + Skip 0x00007be5 + Stop 0x00007be6 + Pause 0x00007be7 + Record 0x00007be8 + Play 0x00007be9 + Rewind 0x00007bea + Forward 0x00007beb + ChanDown 0x00007bec + ChanUp 0x00007bed + VolDown 0x00007bee + VolUp 0x00007bef + More 0x00007bf0 + Mute 0x00007bf1 + Home 0x00007bf2 + Power 0x00007bf3 + Enter 0x00007bf4 + Clear 0x00007bf5 + Nine 0x00007bf6 + Eight 0x00007bf7 + Seven 0x00007bf8 + Six 0x00007bf9 + Five 0x00007bfa + Four 0x00007bfb + Three 0x00007bfc + Two 0x00007bfd + One 0x00007bfe + Zero 0x00007bff + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb new file mode 100644 index 0000000..3738bfa --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/mceusb/lircrc-mceusb @@ -0,0 +1,393 @@ +# lircrc.mceusb + +################### +# +# MythTV +# +################### +begin + prog = mythtv + button = One + config = 1 +end + +begin + prog = mythtv + button = Two + config = 2 +end + +begin + prog = mythtv + button = Three + config = 3 +end + +begin + prog = mythtv + button = Four + config = 4 +end + +begin + prog = mythtv + button = Five + config = 5 +end + +begin + prog = mythtv + button = Six + config = 6 +end + +begin + prog = mythtv + button = Seven + config = 7 +end + +begin + prog = mythtv + button = Eight + config = 8 +end + +begin + prog = mythtv + button = Nine + config = 9 +end + +begin + prog = mythtv + button = Zero + config = 0 +end + +begin + prog = mythtv + button = Back + config = Esc +end + +begin + prog = mythtv + button = Guide + config = M +end + +begin + prog = mythtv + button = More + config = I +end + +begin + prog = mythtv + button = VolDown + config = F10 +end + +begin + prog = mythtv + button = VolUp + config = F11 +end + +begin + prog = mythtv + button = Up + config = Up +end + +begin + prog = mythtv + button = Down + config = Down +end + +begin + prog = mythtv + button = Left + config = Left +end + +begin + prog = mythtv + button = Right + config = Right +end + +begin + prog = mythtv + button = Play + config = Return +end + +begin + prog = mythtv + button = OK + config = Return +end + +begin + prog = mythtv + button = Mute + config = | +end + +begin + prog = mythtv + button = Rewind + config = Left +end + +begin + prog = mythtv + button = Forward + config = Right +end + +begin + prog = mythtv + button = Record + config = R +end + +begin + prog = mythtv + button = Stop + config = O +end + +begin + prog = mythtv + button = Pause + config = P +end + +# Use for backwards commercial skip +begin + prog = mythtv + button = Replay + config = Q +end + +# Use for forward commercial skip +begin + prog = mythtv + button = Skip + config = Z +end + + +################### +# +# MPlayer +# +################### +begin + prog = mplayer + button = Stop + config = quit +end + +begin + prog = mplayer + button = Play + config = seek +1 +end + +begin + prog = mplayer + button = More + config = osd +end + +begin + prog = mplayer + button = Replay + config = seek -10 + repeat = 1 +end + +begin + prog = mplayer + button = Skip + config = seek +10 + repeat = 1 +end + +begin + prog = mplayer + button = Rewind + config = seek -30 + repeat = 1 +end + +begin + prog = mplayer + button = Forward + config = seek +30 + repeat = 1 +end + +begin + prog = mplayer + button = Pause + config = pause +end + +begin + prog = mplayer + button = VolUp + config = volume +1 + repeat = 1 +end + +begin + prog = mplayer + button = VolDown + config = volume -1 + repeat = 1 +end + +begin + prog = mplayer + button = Mute + config = mute +end + +################### +# +# Xine +# +################### +# Xine lirc setup +begin +prog = xine +button = Play +repeat = 3 +config = Play +end + +begin +prog = xine +button = Stop +repeat = 3 +config = Stop +end + +begin +prog = xine +button = Back +repeat = 3 +config = Quit +end + +begin +prog = xine +button = Pause +repeat = 3 +config = Pause +end + +begin +prog = xine +button = Up +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = Down +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = Left +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = Right +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = Home +repeat = 3 +config = Menu +end + +begin +prog = xine +button = Forward +repeat = 3 +config = SpeedFaster +end + +begin +prog = xine +button = Rewind +repeat = 3 +config = SpeedSlower +end + +begin +prog = xine +button = VolUp +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = VolDown +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = Mute +repeat = 3 +config = Mute +end + +begin +prog = xine +button = ChanUp +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = ChanDown +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = More +repeat = 3 +config = OSDStreamInfos +end + diff --git a/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg new file mode 100644 index 0000000..0aa6a4a Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/mceusb/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg new file mode 100644 index 0000000..1d887dd Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/no_remote/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell new file mode 100644 index 0000000..b63ab25 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/packard_bell/lircd.conf.packard_bell @@ -0,0 +1,94 @@ +# Config file for Packard Bell Remotes (with repeat codes!) +# created by Samuel Wood (sjw@umr.edu) +# +# brand: Packard Bell Remote +# model: El Cheapo Packard Bell Remote +# +# This is a config file for the cheap excess Packard Bell remotes +# you sometimes can buy from online auctions like www.onsale.com. +# +# The receiver that comes with it hooks into the serial port and works +# fine with lirc 0.5.4. +# +# The receiver that comes with the remote is near garbage. If +# you don't point almost directly at it, it will not detect. But +# it's simpler than building your own. :-) +# +# Repeat works fine for me. You just have to modify or add the +# "repeat=" lines in your .lircrc. +# +# irrecord was used to generate the file, then I modified and +# added repeat codes. +# +# The button names used are identical to what was printed on the +# remote, except for the number pads (using actual numbers like +# "1" and so forth did not seem to work. Similarly, '*' is Star +# and '#' is Hash. LMB and RMB refer to the two mousepad buttons +# on the left and right respectively. +# +# I still need to modify the gap setting. Right now, if you don't +# hold the button down long enough, it may not register, but if +# you hold it too long, it will detect a repeat or two. Feel free +# to modify this to work better. If you get it to work better, send +# me a copy. :-) + +begin remote + + name PackBell + bits 15 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9065 4500 + one 597 532 + zero 597 1643 + ptrail 597 + pre_data_bits 16 + pre_data 0xF708 + post_data_bits 1 + post_data 0x0 + gap 107000 + repeat_bit 0 + repeat 9050 2250 + + begin codes + Help 0x0000000000006F90 + Phone 0x0000000000004FB0 + Message 0x0000000000006E91 + SRS 0x0000000000004EB1 + CD 0x0000000000002FD0 + Aux1 0x0000000000000FF0 + Aux2 0x0000000000002ED1 + Aux3 0x0000000000000EF1 + LMB 0x00000000000023DC + RMB 0x000000000000639C + Up 0x00000000000037C8 + Down 0x00000000000057A8 + Left 0x0000000000007788 + Right 0x00000000000017E8 + Menu 0x0000000000007B84 + Mute 0x0000000000003BC4 + Enter 0x00000000000047B8 + CHUp 0x00000000000027D8 + CHDown 0x0000000000006798 + VolUp 0x0000000000005BA4 + VolDown 0x0000000000001BE4 + Display 0x00000000000007F8 + One 0x0000000000005EA1 + Two 0x0000000000001EE1 + Three 0x0000000000000BF4 + Four 0x0000000000007E81 + Five 0x0000000000003EC1 + Six 0x0000000000004BB4 + Seven 0x0000000000005FA0 + Eight 0x0000000000001FE0 + Nine 0x0000000000002BD4 + Zero 0x0000000000003FC0 + Star 0x0000000000007F80 + Hash 0x0000000000006B94 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak new file mode 100644 index 0000000..0a11e58 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircd.conf.pcmak @@ -0,0 +1,116 @@ +# +# +# contributed by P_awe_L pablozrudnika@wp.pl +# +# brand: PC MAK/MINIMAK LASER/MINIMAK +# model: Value Infrared Remote Control +# supported devices: PC MAK receiver +# + +begin remote + + name PC_MAK + bits 8 + flags SPACE_ENC|CONST_LENGTH + eps 15 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 8 + pre_data 0xAA + gap 100000 + repeat_bit 0 + + begin codes + HOME 0x0000000000000001 + ARROW_UP 0x0000000000000002 + PG_UP 0x0000000000000003 + ARROW_LEFT 0x0000000000000004 + ENTER 0x0000000000000005 + ARROW_RIGHT 0x0000000000000006 + END 0x0000000000000007 + ARROW_DOWN 0x0000000000000008 + PG_DN 0x0000000000000009 + SPACE 0x000000000000000A + TAB 0x000000000000000B + ESC 0x000000000000000C + ALT 0x000000000000000D + PLAYLIST 0x000000000000000E + LOAD 0x000000000000000F + MOUSE_N 0x0000000000000010 + MOUSE_NE 0x0000000000000011 + MOUSE_E 0x0000000000000012 + MOUSE_SE 0x0000000000000013 + MOUSE_S 0x0000000000000014 + MOUSE_SW 0x0000000000000015 + MOUSE_W 0x0000000000000016 + MOUSE_NW 0x0000000000000017 + FULLSCREEN 0x0000000000000018 + BUTTONL_DOWN 0x0000000000000019 + BUTTONR_DOWN 0x000000000000001A + POWER 0x000000000000001B + A 0x000000000000001C + B 0x000000000000001D + C 0x000000000000001E + D 0x000000000000001F + VOL_DOWN 0x0000000000000020 + MUTE 0x0000000000000021 + VOL_UP 0x0000000000000022 + PLAY 0x0000000000000024 + PREV 0x0000000000000026 + PAUSE 0x0000000000000027 + NEXT 0x0000000000000028 + SKIP_BACK 0x0000000000000029 + STOP 0x000000000000002A + SKIP_FORW 0x000000000000002B + 1 0x0000000000000041 + 2 0x0000000000000042 + 3 0x0000000000000043 + 4 0x0000000000000044 + 5 0x0000000000000045 + 6 0x0000000000000046 + 7 0x0000000000000047 + 8 0x0000000000000048 + 9 0x0000000000000049 + 0 0x000000000000004A + sTAB 0x000000000000004B + sESC 0x000000000000004C + sALT 0x000000000000004D + sPLAYLIST 0x000000000000004E + TXT 0x000000000000004F + sMOUSE_N 0x0000000000000050 + sMOUSE_NE 0x0000000000000051 + sMOUSE_E 0x0000000000000052 + sMOUSE_SE 0x0000000000000053 + sMOUSE_S 0x0000000000000054 + sMOUSE_SW 0x0000000000000055 + sMOUSE_W 0x0000000000000056 + sMOUSE_NW 0x0000000000000057 + sOK 0x0000000000000058 + BUTTONL_UP 0x0000000000000059 + BUTTONR_UP 0x000000000000005A + EXIT 0x000000000000005B + E 0x000000000000005C + F 0x000000000000005D + G 0x000000000000005E + H 0x000000000000005F + sVOL_DOWN 0x0000000000000060 + sMUTE 0x0000000000000061 + sVOL_UP 0x0000000000000062 + sPLAY 0x0000000000000064 + sPREV 0x0000000000000066 + sPAUSE 0x0000000000000067 + sNEXT 0x0000000000000068 + ZOOM- 0x0000000000000069 + HELP 0x000000000000006A + ZOOM+ 0x000000000000006B + MM_PLAY 0x000000000000002F + MM_PREV 0x0000000000000030 + MM_NEXT 0x0000000000000031 + MM_PAUSE 0x000000000000005F + MM_BACK 0x0000000000000075 + MM_FORW 0x0000000000000079 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak new file mode 100644 index 0000000..d7c8dcf --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircmd.conf.pcmak @@ -0,0 +1,29 @@ +# +# lircmd config file for the PC_MAK control +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 25 2 + +#ACTIVATE * MENU + +MOVE_N PC_MAK MOUSE_N +MOVE_NE PC_MAK MOUSE_NE + +MOVE_E PC_MAK MOUSE_E +MOVE_SE PC_MAK MOUSE_SE + +MOVE_S PC_MAK MOUSE_S +MOVE_SW PC_MAK MOUSE_SW + +MOVE_W PC_MAK MOUSE_W +MOVE_NW PC_MAK MOUSE_NW + +BUTTON1_CLICK PC_MAK BUTTONL_DOWN +BUTTON3_CLICK PC_MAK BUTTONR_DOWN + +BUTTON1_TOGGLE PC_MAK BUTTONL_UP +BUTTON3_TOGGLE PC_MAK BUTTONR_UP diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak new file mode 100644 index 0000000..414e38a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pcmak/lircrc.pcmak @@ -0,0 +1,1310 @@ +##################################################################### +# contributed by P_awe_L pablozrudnika@wp.pl +##################################################################### +# +# XMMS +# +##################################################################### +begin xmms + begin + prog = irxevent + button = LOAD + config = Key shift-L xmms + end + begin + prog = xmms + button = play + config = PLAY + end + begin + prog = irxevent + remote = * + button = PLAYLIST + config = Key alt-e XMMS + end + begin + prog = irxevent + remote = * + button = FULLSCREEN + config = Key ctrl-d XMMS + end + begin + prog = xmms + button = TXT + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = pause + config = PAUSE + end + begin + prog = xmms + button = stop + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + end + begin + prog = xmms + button = NEXT + config = NEXT + end + begin + prog = xmms + button = PREV + config = PREV + end + begin + prog = xmms + button = SKIP_FORW + repeat = 2 + config = FWD 3 + end + begin + prog = xmms + button = SKIP_BACK + repeat = 2 + config = BWD 3 + end + begin + prog = xmms + button = VOL_UP + repeat = 2 + config = VOL_UP 5 + end + begin + prog = xmms + remote = * + button = H + repeat = 2 + config = VOL_DOWN 5 + end +end xmms +##################################################################### +# +# MPlayer +# +##################################################################### +begin mplayer + begin + prog = mplayer + remote = * + button = PLAYLIST + config = gui_playlist + end + begin + prog = mplayer + remote = * + button = LOAD + config = gui_loadfile + end + begin + prog = mplayer + remote = * + button = TXT + config = gui_loadsubtitle + end + begin + prog = mplayer + remote = * + button = FULLSCREEN + config = vo_fullscreen + end + begin + prog = mplayer + remote = * + button = MUTE + config = mute + end + begin + prog = mplayer + remote = * + button = SKIP_FORW + repeat = 1 + config = seek +10 + end + begin + prog = mplayer + remote = * + button = VOL_DOWN + repeat = 1 + config = volume -1 + end + begin + prog = mplayer + remote = * + button = VOL_UP + repeat = 1 + config = volume 1 + end + begin + prog = mplayer + remote = * + button = SKIP_BACK + repeat = 1 + config = seek -10 + end + begin + prog = mplayer + button = play + config = pause + end + begin + prog = mplayer + button = pause + config = pause + end + begin + prog = mplayer + button = stop + config = seek 0 1\npause + end + begin + prog = mplayer + button = NEXT + config = pt_step 1 + end + begin + prog = mplayer + button = PREV + config = pt_step -1 + end + begin + prog = mplayer + button = EXIT + config = quit + end +end mplayer +##################################################################### +# +# GQview +# +##################################################################### +begin gqview + begin + prog = irxevent + remote = * + button = EXIT + config = Key ctrl-q GQview + end + begin + prog = irxevent + remote = * + button = FULLSCREEN + config = Key v GQview + end + begin + prog = irxevent + remote = * + button = PREV + repeat = 5 + config = Key Prior GQview + end + begin + prog = irxevent + remote = * + button = SKIP_BACK + config = Key Home GQview + end + begin + prog = irxevent + remote = * + button = SKIP_FORW + config = Key End GQview + end + begin + prog = irxevent + remote = * + button = NEXT + repeat = 5 + config = Key Next GQview + end + begin + prog = irxevent + button = ZOOM- + repeat = 5 + config = Key minus GQview + end + begin + prog = irxevent + button = ZOOM+ + repeat = 5 + config = Key plus GQview + end + begin + prog = irxevent + button = C + config = Key s GQview + end + begin + prog = irxevent + button = LOAD + config = Key o GQview + end +end gqview +##################################################################### +# +# Sterowanie Xwindow Linuxa +# +##################################################################### +begin linux + begin + prog = irexec + button = PAUSE + config = xscreensaver-command -activate + end + begin + prog = irxevent + button = sNEXT + config = Key alt-Escape RootWindow + end + begin + prog = irxevent + button = sPREV + config = Key alt-shift-Escape RootWindow + end + begin + prog = irexec + button = STOP + config = xset dpms force off + end + begin + prog = irexec + button = PLAY + config = xset dpms force on + end + begin + prog = irexec + button = EXIT + config = poweroff + end +end linux +##################################################################### +# +# Xine +# +##################################################################### +# Reduce the output window size. +begin xine + begin + prog = xine + button = xxxxx + config = WindowReduce + end + # Enlarge the output window size. + begin + prog = xine + button = xxxxx + config = WindowEnlarge + end + # Select next sub picture (subtitle) channel. + begin + prog = xine + button = NEXT + config = SpuNext + end + # Select previous sub picture (subtitle) channel. + begin + prog = xine + button = PREV + config = SpuPrior + end + # Visibility toggle of control window. + begin + prog = xine + button = xxxxx + config = ControlShow + end + # Visibility toggle of output window visibility. + begin + prog = xine + button = xxxxx + config = ToggleWindowVisibility + end + # Select next audio channel. + begin + prog = xine + button = xxxxx + config = AudioChannelNext + end + # Select previous audio channel. + begin + prog = xine + button = xxxxx + config = AudioChannelPrior + end + # Visibility toggle of playlist editor window. + begin + prog = xine + button = PLAYLIST + config = PlaylistEditor + end + # Playback pause toggle. + begin + prog = xine + button = PAUSE + config = Pause + end + # Visibility toggle of UI windows. + begin + prog = xine + button = xxxxx + config = ToggleVisiblity + end + # Fullscreen toggle. + begin + prog = xine + button = FULLSCREEN + config = ToggleFullscreen + end + # Aspect ratio values toggle. + begin + prog = xine + button = xxxxx + config = ToggleAspectRatio + end + # Interlaced mode toggle. + begin + prog = xine + button = xxxxx + config = ToggleInterleave + end + # Quit the program. + begin + prog = irxevent + button = EXIT + config = Key q xine + end + # Start playback. + begin + prog = xine + button = PLAY + config = Play + end + # Visibility toggle of the setup window. + begin + prog = xine + button = xxxxx + config = SetupShow + end + # Stop playback. + begin + prog = xine + button = STOP + config = Stop + end + # Select and play next mrl in the playlist. + begin + prog = xine + button = xxxxx + config = NextMrl + end + # Select and play previous mrl in the playlist. + begin + prog = xine + button = xxxxx + config = PriorMrl + end + # Eject the current medium. + begin + prog = xine + button = xxxxx + config = Eject + end + # Set position to beginning of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition0% + end + # Set position to 10% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition10% + end + # Set position to 20% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition20% + end + # Set position to 30% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition30% + end + # Set position to 40% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition40% + end + # Set position to 50% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition50% + end + # Set position to 60% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition60% + end + # Set position to 70% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition70% + end + # Set position to 80% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition80% + end + # Set position to 90% of current stream. + begin + prog = xine + button = xxxxx + config = SetPosition90% + end + # Set position to -60 seconds in current stream. + begin + prog = xine + button = xxxxx + config = SeekRelative-60 + end + # Set position to +60 seconds in current stream. + begin + prog = xine + button = xxxxx + config = SeekRelative+60 + end + # Set position to -15 seconds in current stream. + begin + prog = xine + button = SKIP_BACK + config = SeekRelative-15 + end + # Set position to +15 seconds in current stream. + begin + prog = xine + button = SKIP_FORW + config = SeekRelative+15 + end + # Visibility toggle of mrl browser window. + begin + prog = xine + button = xxxxx + config = MrlBrowser + end + # Audio muting toggle. + begin + prog = xine + button = MUTE + config = Mute + end + # Change audio syncing. + begin + prog = xine + button = xxxxx + config = AudioVideoDecay+ + end + # Change audio syncing. + begin + prog = xine + button = xxxxx + config = AudioVideoDecay- + end + # Reset audio video syncing offset. + begin + prog = xine + button = xxxxx + config = AudioVideoDecayReset + end + # Increment playback speed. + begin + prog = xine + button = xxxxx + config = SpeedFaster + end + # Decrement playback speed. + begin + prog = xine + button = xxxxx + config = SpeedSlower + end + # Increment audio volume. + begin + prog = xine + button = VOL_UP + config = Volume+ + end + # Decrement audio volume. + begin + prog = xine + button = VOL_DOWN + config = Volume- + end + # Take a snapshot (Internal image fetch and save). + begin + prog = xine + button = xxxxx + config = Snapshot + end + # Resize output window to stream size1:1. + begin + prog = xine + button = xxxxx + config = Zoom1:1 + end + # Grab pointer toggle. + begin + prog = xine + button = xxxxx + config = GrabPointer + end + # Menu 1 event. + begin + prog = xine + button = xxxxx + config = EventMenu1 + end + # Menu 2 event. + begin + prog = xine + button = xxxxx + config = EventMenu2 + end + # Menu 3 event. + begin + prog = xine + button = xxxxx + config = EventMenu3 + end + # Up event. + begin + prog = xine + button = xxxxx + config = EventUp + end + # Down event. + begin + prog = xine + button = xxxxx + config = EventDown + end + # Left event. + begin + prog = xine + button = xxxxx + config = EventLeft + end + # Right event. + begin + prog = xine + button = xxxxx + config = EventRight + end + # Previous event. + begin + prog = xine + button = xxxxx + config = EventPrior + end + # Next event. + begin + prog = xine + button = xxxxx + config = EventNext + end + # Previous angle event. + begin + prog = xine + button = xxxxx + config = EventAnglePrior + end + # Next angle event. + begin + prog = xine + button = xxxxx + config = EventAngleNext + end + # Select event. + begin + prog = xine + button = xxxxx + config = EventSelect + end + # Zoom into video. + begin + prog = xine + button = xxxxx + config = ZoomIn + end + # Zoom out of video. + begin + prog = xine + button = xxxxx + config = ZoomOut + end + # Zoom into video horizontally, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomInX + end + # Zoom out of video horizontally, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomOutX + end + # Zoom into video vertically, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomInY + end + # Zoom out of video vertically, distorting aspect ratio. + begin + prog = xine + button = xxxxx + config = ZoomOutY + end + # Reset zooming. + begin + prog = xine + button = xxxxx + config = ZoomReset + end + # Toggle TV modes on the DXR3 + begin + prog = xine + button = xxxxx + config = ToggleTVmode + end + # Visibility toggle of log viewer + begin + prog = xine + button = xxxxx + config = ViewlogShow + end +end xine +##################################################################### +# +# XAWTV +# +##################################################################### +begin xawtv + begin + prog = xawtv + remote = * + button = NEXT + config = setstation next + end + begin + prog = xawtv + remote = * + button = PREV + config = setstation prev + end + begin + prog = xawtv + remote = * + button = VOL_UP + config = volume inc + end + begin + prog = xawtv + remote = * + button = VOL_DOWN + config = volume dec + end + begin + prog = xawtv + remote = * + button = MUTE + config = volume mute + end + begin + prog = xawtv + remote = * + button = FULLSCREEN + config = fullscreen toggle + flags = once + end + begin + prog = xawtv + remote = * + button = PLAYLIST + config = setinput next + end + begin + prog = xawtv + remote = * + button = EXIT + config = quit + flags = once + end + begin + prog = xawtv + remote = * + button = ARROW_UP + config = keypad 1 + end + begin + prog = xawtv + remote = * + button = ARROW_UP + config = keypad 2 + end + begin + prog = xawtv + remote = * + button = PG_UP + config = keypad 3 + end + begin + prog = xawtv + remote = * + button = ARROW_LEFT + config = keypad 4 + end + begin + prog = xawtv + remote = * + button = ENTER + config = keypad 5 + end + begin + prog = xawtv + remote = * + button = ARROW_RIGHT + config = keypad 6 + end + begin + prog = xawtv + remote = * + button = END + config = keypad 7 + end + begin + prog = xawtv + remote = * + button = ARROW_DOWN + config = keypad 8 + end + begin + prog = xawtv + remote = * + button = PG_DN + config = keypad 9 + end + begin + prog = xawtv + remote = * + button = SPACE + config = keypad 0 + end +end xawtv +##################################################################### +# +# Xpdf +# +##################################################################### +begin xpdf + begin + prog = irxevent + remote = * + button = LOAD + config = Key o xpdf + end + begin + prog = irxevent + remote = * + button = PREV + config = Key p xpdf + end + begin + prog = irxevent + remote = * + button = NEXT + config = Key n xpdf + end + begin + prog = irxevent + remote = * + button = SKIP_BACK + config = Key BackSpace xpdf + end + begin + prog = irxevent + remote = * + button = SKIP_FORW + config = Key space xpdf + end + begin + prog = irxevent + remote = * + button = ZOOM- + config = Key minus xpdf + end + begin + prog = irxevent + remote = * + button = ZOOM+ + config = Key KP_Add xpdf + end + begin + prog = irxevent + remote = * + button = sPREV + config = Key z xpdf + end + begin + prog = irxevent + remote = * + button = sNEXT + config = Key w xpdf + end + begin + prog = irxevent + remote = * + button = EXIT + config = Key q xpdf + end +end xpdf +##################################################################### +# +# FREEVO +# In freevo_config.py variable LIRCRC have to show this file +# eg. LIRCRC = '/home/john/.lircrc' +##################################################################### +begin freevo + begin + prog = irexec + remote = * + button = POWER + config = freevo stop + end + begin + prog = freevo + remote = * + button = PLAYLIST + config = DISPLAY + end + begin + prog = freevo + remote = * + button = sPLAYLIST + config = SUBTITLE + end + begin + prog = freevo + remote = * + button = BUTTONR_DOWN + config = EXIT + end + begin + prog = freevo + remote = * + button = MOUSE_N + config = UP + end + begin + prog = freevo + remote = * + button = MOUSE_S + config = DOWN + end + begin + prog = freevo + remote = * + button = MOUSE_W + config = LEFT + end + begin + prog = freevo + remote = * + button = MOUSE_E + config = RIGHT + end + begin + prog = freevo + remote = * + button = BUTTONL_DOWN + config = SELECT + end + begin + prog = freevo + remote = * + button = FULLSCREEN + config = SELECT + end + begin + prog = freevo + remote = * + button = MUTE + config = MUTE + end + begin + prog = freevo + remote = * + button = VOL_UP + config = VOL+ + end + begin + prog = freevo + remote = * + button = VOL_DOWN + config = VOL- + end + begin + prog = freevo + remote = * + button = NEXT + config = CH+ + end + begin + prog = freevo + remote = * + button = PREV + config = CH- + end + begin + prog = freevo + remote = * + button = sPREV + config = PREV_CH + end + begin + prog = freevo + button = sNEXT + config = NEXT_CH + end + begin + prog = freevo + button = SKIP_BACK + config = REW + end + begin + prog = freevo + button = SKIP_FORW + config = FFWD + end + begin + prog = freevo + remote = * + button = PLAY + config = PLAY + end + begin + prog = freevo + remote = * + button = PAUSE + config = PAUSE + end + begin + prog = freevo + remote = * + button = STOP + config = STOP + end + begin + prog = freevo + remote = * + button = sPLAY + config = REC + end + begin + prog = freevo + remote = * + button = HELP + repeat = 10 + config = EJECT + end + begin + prog = freevo + remote = * + button = HOME + config = + end + begin + prog = freevo + remote = * + button = ARROW_UP + config = + end + begin + prog = freevo + remote = * + button = PG_UP + config = + end + begin + prog = freevo + remote = * + button = ARROW_LEFT + config = + end + begin + prog = freevo + remote = * + button = ENTER + config = + end + begin + prog = freevo + remote = * + button = ARROW_RIGHT + config = + end + begin + prog = freevo + remote = * + button = END + config = + end + begin + prog = freevo + remote = * + button = ARROW_DOWN + config = + end + begin + prog = freevo + remote = * + button = PG_DN + config = + end + begin + prog = freevo + remote = * + button = SPACE + config = + end + begin + prog = freevo + remote = * + button = TAB + config = + end + begin + prog = freevo + remote = * + button = ESC + config = + end + begin + prog = freevo + remote = * + button = ALT + config = + end +end freevo +##################################################################### +# +# Wybor aplikacji +# +##################################################################### +begin + prog = irexec + button = A + config = xmms& + mode = xmms +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = B + config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi + mode = mplayer +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = C + config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi + mode = gqview +end +begin + prog = none + button = D + mode = linux +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + remote = * + button = E + config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi + mode = xine +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = F + config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi + mode = xawtv +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + button = G + config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi + mode = xpdf +end +#tag:Uruchom program tylko raz!! +begin + prog = irexec + remote = * + button = H + config = freevo& + mode = freevo +end +##################################################################### +# +# Klawisze Globalne +# +##################################################################### +begin + prog = irxevent + button = HOME + config = Key Home CurrentWindow +end +begin + prog = irxevent + button = ARROW_UP + repeat = 5 + config = Key Up CurrentWindow +end +begin + prog = irxevent + button = PG_UP + repeat = 5 + config = Key Page_Up CurrentWindow +end +begin + prog = irxevent + button = ARROW_LEFT + repeat = 5 + config = Key Left CurrentWindow +end +begin + prog = irxevent + button = ENTER + config = Key Return CurrentWindow +end +begin + prog = irxevent + button = ARROW_RIGHT + repeat = 5 + config = Key Right CurrentWindow +end +begin + prog = irxevent + button = END + config = Key End CurrentWindow +end +begin + prog = irxevent + button = ARROW_DOWN + repeat = 5 + config = Key Down CurrentWindow +end +begin + prog = irxevent + button = PG_DN + repeat = 5 + config = Key Page_Down CurrentWindow +end +begin + prog = irxevent + button = TAB + config = Key Tab CurrentWindow +end +begin + prog = irxevent + remote = * + button = sTAB + config = Key shift-Tab CurrentWindow +end +begin + prog = irxevent + button = SPACE + config = Key space CurrentWindow +end +begin + prog = irxevent + button = ESC + config = Key Escape CurrentWindow +end +begin + prog = irxevent + button = ALT + config = Key UP CurrentWindow +end +begin + prog = irxevent + button = 1 + config = Key 1 CurrentWindow +end +begin + prog = irxevent + button = 2 + config = Key 2 CurrentWindow +end +begin + prog = irxevent + button = 3 + config = Key 3 CurrentWindow +end +begin + prog = irxevent + remote = * + button = 4 + config = Key 4 CurrentWindow +end +begin + prog = irxevent + button = 5 + config = Key 5 CurrentWindow +end +begin + prog = irxevent + button = 6 + config = Key 6 CurrentWindow +end +begin + prog = irxevent + button = 7 + config = Key 7 CurrentWindow +end +begin + prog = irxevent + button = 8 + config = Key 8 CurrentWindow +end +begin + prog = irxevent + button = 9 + config = Key 9 CurrentWindow +end +begin + prog = irxevent + button = 0 + config = Key 0 CurrentWindow +end diff --git a/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg new file mode 100644 index 0000000..d2ccdd1 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/pcmak/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv new file mode 100644 index 0000000..4783e06 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pinnacle_systems/lircd.conf.pctv @@ -0,0 +1,94 @@ +# +# contributed by Bart Alewijnse +# +# brand: Pinnacle Systems +# model: PCTV Remote (Perhaps other ones as well) +# supported devices: there's only one I know of. (serial) +# +# Mail me if your remote is only partly supported, or if it has different +# buttons than listed below. +# + +begin remote + + name PinnacleSysPCTVRemote + bits 8 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + gap 180000 + + begin codes + Mute 0x000000000000003C + Power 0x000000000000002F + Chan+Play 0x000000000000003F + Chan-Stop 0x000000000000003E + Vol+FF 0x000000000000003B + Vol-Rew 0x000000000000003D + 1 0x0000000000000031 + 2 0x0000000000000032 + 3 0x0000000000000033 + 4 0x0000000000000034 + 5 0x0000000000000035 + 6 0x0000000000000036 + 7 0x0000000000000037 + 8 0x0000000000000038 + 9 0x0000000000000039 + Fullscreen 0x000000000000002D + 0/AV 0x000000000000003A + Info 0x000000000000002B + Preview 0x000000000000002E + Record 0x0000000000000027 + Chan_Last 0x0000000000000025 + F_TV 0x0000000000000026 + F_TELETEXT 0x0000000000000029 + F_RADIO 0x000000000000002A + +# +# here are some extra buttons a new version of the remote seems to have +# +# contributed by Robbert Monna +# +# brand: Pinnacle Systems +# model: PCTV Remote (newest version?) +# supported devices: dongle on serial port (from TV-Card) +# + L 0x000000000000001F + Zoom 0x000000000000001E + vol+ 0x000000000000001B + vol- 0x000000000000000F + channel+ 0x0000000000000017 + channel- 0x000000000000001C + middle 0x000000000000001A + Menu 0x000000000000001D + next 0x0000000000000019 + undo 0x0000000000000016 + pause 0x0000000000000015 + redo 0x0000000000000013 + Rewind 0x000000000000000E + Play 0x000000000000000D + Stop 0x000000000000000B + FForward 0x0000000000000007 + EPG 0x0000000000000018 + +# here are some more buttons that seem to be mapped differently from +# the ones above + +# contributed by InterCeptor ceptor_7@freemail.hu +# +# brand: Pinnacle Systems PCTV Pro Remote +# model no. of remote control: (I can't find any numbers on it) +# supported devices: serial +# + + 9 0x0000000000000082 + Zoom 0x00000000000000B2 + middle 0x0000000000000014 + + + end codes +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv new file mode 100644 index 0000000..064ee57 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv @@ -0,0 +1,34 @@ +# +# contributed by Nathan Hand +# +# brand: Pixelview +# model: +# supported devices: Pixelview PlayTV PRO +# + +begin remote + name Pixelview + bits 8 + + begin codes + TV/FM 0x00000000000000e7 + FULL_SCREEN 0x00000000000000bf + CH+ 0x0000000000000049 + CH- 0x00000000000000c1 + VOL- 0x000000000000006a + VOL+ 0x000000000000004a + MUTE 0x0000000000000047 + SOURCE 0x00000000000000e1 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 new file mode 100644 index 0000000..f017a3b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_bt878 @@ -0,0 +1,54 @@ +# +# contributed by Michal Kochanowicz +# based on file contributred by Nathan Hand +# +# brand: PixelView +# model: BT878+W/FM +# supported devices: PixelView BT878+W/FM +# + +begin remote + name PixelView + bits 8 +# repeat_bit 2 + repeat 9080 2189 + gap 108056 + repeat_bit 0 + + begin codes + POWER 0x00000000000000aa + TV/FM 0x00000000000000e7 + TELETEXT 0x000000000000003f + SCAN 0x0000000000000041 + +/- 0x0000000000000069 + EJECT 0x000000000000002a + STOP 0x000000000000008a + SOURCE 0x00000000000000e1 + STEREO 0x00000000000000df + ENTER 0x000000000000005f + SEEK_NEXT 0x0000000000000067 + SEEK_FWD 0x00000000000000c7 + CH_UP 0x0000000000000049 + VOL_UP 0x000000000000004a + RECALL 0x0000000000000048 + PAUSE 0x0000000000000068 + PLAY 0x00000000000000ca + CH_DOWN 0x00000000000000c1 + VOL_DOWN 0x000000000000006a + SEEK_PREV 0x000000000000000a + SEEK_BACK 0x0000000000000042 + ZOOM 0x00000000000000bf + MUTE 0x0000000000000047 + 1 0x00000000000000e0 + 2 0x00000000000000c8 + 3 0x00000000000000e8 + 4 0x0000000000000060 + 5 0x0000000000000062 + 6 0x00000000000000c9 + 7 0x00000000000000c0 + 8 0x00000000000000c2 + 9 0x0000000000000061 + 0 0x0000000000000040 + end codes +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro new file mode 100644 index 0000000..84e84a9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.playtv_pro @@ -0,0 +1,159 @@ +# +# brand: PixelView +# model: PlayTV Pro remote control +# +# supported devices: +# works both with home-brew and TV card receiver (use lirc-0.6.6 or better) +# + + +begin remote + + name pixelviewp + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 200 + + pre_data_bits 16 + pre_data 0x61d6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + begin codes + + power 0x0000000000007887 + zoom 0x00000000000038C7 + scan 0x000000000000E01F + tv/fm 0x000000000000C03F + vol+ 0x000000000000F807 + vol- 0x000000000000E817 + chan+ 0x0000000000006897 + chan- 0x00000000000028D7 + mute 0x00000000000018E7 + source 0x00000000000000FF + loop 0x000000000000C837 + +100 0x00000000000008F7 + fn- 0x00000000000020DF + fn+ 0x00000000000030CF + reset 0x000000000000B04F + freeze 0x000000000000F00F + function 0x000000000000708F + 0 0x00000000000040BF + 1 0x000000000000807F + 2 0x000000000000D02F + 3 0x000000000000D827 + 4 0x000000000000A05F + 5 0x000000000000906F + 6 0x000000000000A857 + 7 0x000000000000609F + 8 0x00000000000050AF + 9 0x00000000000048B7 + + end codes + +end remote + + +# This config file was automatically generated +# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005 +# +# contributed by Thadeu A. Coelho de Paula +# thadeudepaula (at) gmail (dot) com +# http://mundolivre.hostrix.com.br +# +# brand: PixelView +# model: PlayTV MPEG2 (M4900) +# +# supported devices: +# This TV Card + + +begin remote + + name PixelView_PlayTV_MPEG2 + bits 16 + eps 30 + aeps 100 + + pre_data_bits 16 + pre_data 0x61D6 + + header 9000 4500 + one 563 1687 + zero 563 562 + ptrail 563 + repeat 9000 2250 + gap 108000 + toggle_bit 0 + + frequency 38000 + duty_cycle 33 + + + + begin codes + timeshift 0xC03F + power 0x7887 + 1 0x807F + 2 0xD02F + 3 0xD827 + 4 0xA05F + 5 0x906F + 6 0xA857 + 7 0x609F + 8 0x50AF + 9 0x48B7 + 0 0x40BF + loop 0xC837 + +100 0x08F7 + source 0x00FF + mute 0x18E7 + ch+ 0x6897 + ch- 0x28D7 + vol+ 0xF807 + vol- 0xE817 + zoom 0x38C7 + snapshot 0x9867 + scan 0x58A7 + bw 0x20DF + rec 0x708F + fw 0x30CF + stop 0xB847 + play 0x10EF + pause 0xF00F + tv 0xB04F + fm 0xE01F + end codes + +end remote + +# CONTROL LAYOUT: +# +# TIMESHIFT POWER +# +# 1 2 3 +# 4 5 6 +# 7 8 9 +# LOOP 0 SCAN +# SOURCE MUTE +# +# CH+ +# VOL- ZOOM VOL+ +# CH- +# +# SNAPSHOT SCAN +# +# BW REC FW +# STOP PLAY PAUSE +# +# TV FM diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster new file mode 100644 index 0000000..1b75e42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircd.conf.remotemaster @@ -0,0 +1,117 @@ +# this config file was MANUALLY generated +# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000 +# +# contributed by Petre Rodan +# +# brand: PixelView +# model: RemoteMaster 2000 +# supported devices: ComboTV series +# receiver type: /dev/ttySx +# video card: PixelView bttv848 pll=1 type=5 +# + +begin remote + + name RemoteMaster_2000_12b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x12B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + +begin remote + + name RemoteMaster_2000_14b + bits 20 + flags SPACE_ENC + eps 30 + aeps 100 + + one 0 833 + zero 833 0 + pre_data_bits 10 + pre_data 0x14B + gap 189264 + + begin codes + 1 0x0000000000052D2F + 2 0x0000000000052CCF + 3 0x0000000000052CAF + 4 0x0000000000052D37 + 5 0x0000000000052CDF + 6 0x000000000005359F + 7 0x0000000000052D4F + 8 0x0000000000052D3F + 9 0x00000000000534DF + 0 0x0000000000052D57 + ENTER 0x0000000000052CD7 + +10 0x0000000000053537 + POWER 0x0000000000054D5F + MODE 0x00000000000534AF + TAB 0x0000000000053557 + ZOOM 0x000000000005355F + FREEZE 0x000000000005356F + SEEK-- 0x0000000000054DAF + PAUSE 0x0000000000052CB7 + SEEK++ 0x00000000000534B7 + SEEK- 0x0000000000052D5F + PLAY 0x0000000000052D9F + SEEK+ 0x00000000000534CF + STOP 0x0000000000054D9F + EJECT 0x0000000000054D6F + F1 0x000000000005354F + F2 0x00000000000534D7 + F3 0x00000000000534BF + F4 0x000000000005352F + CH- 0x000000000005353F + CH+ 0x00000000000535AF + VOL- 0x0000000000052D6F + VOL+ 0x0000000000052DAF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro new file mode 100644 index 0000000..e277fe6 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.playtv_pro @@ -0,0 +1,29 @@ +# lircmd.conf file to be used with PixeView PlayTV pro +# +# lircmd config file +# + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * +100 + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * tv/fm +BUTTON2_TOGGLE * scan +BUTTON3_TOGGLE * zoom + +BUTTON1_CLICK * 0 +BUTTON2_CLICK * loop +BUTTON3_CLICK * source + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster new file mode 100644 index 0000000..07d2547 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircmd.conf.remotemaster @@ -0,0 +1,31 @@ +# lircmd.conf file to be used with RemoteMaster 2000 +# +# lircmd config file +# + +# ACCELERATOR start max multiplier + +#PROTOCOL IntelliMouse + +ACCELERATOR 2 20 5 + +ACTIVATE * ENTER + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 +MOVE_S * 8 + +BUTTON1_TOGGLE * +10 +BUTTON2_TOGGLE * FREEZE +#BUTTON3_TOGGLE * LIST + +BUTTON1_CLICK * 5 +BUTTON2_CLICK * 0 +#BUTTON3_CLICK * POWER + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro new file mode 100644 index 0000000..4e495c8 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/pixelview/lircrc.playtv_pro @@ -0,0 +1,134 @@ +# +# This is an example of ~/.lircrc file +# It is a copy of actual setup from my home machine. +# Contributed by Artur Lipowski +# + begin + prog = irexec + button = power + config = xawtv-remote quit + flags = mode + end + begin + prog = irexec + button = source + repeat = 1 + config = xawtv-remote setinput next + end + begin + prog = irexec + button = zoom + repeat = 1 + config = xawtv-remote fullscreen + end + begin + prog = irexec + button = chan- + repeat = 1 + config = xawtv-remote setstation prev + end + begin + prog = irexec + button = chan+ + repeat = 1 + config = xawtv-remote setstation next + end + begin + prog = irxevent + button = loop + repeat = 1 + config = Key c xawtv + end + begin + prog = irxevent + button = scan + repeat = 1 + config = Key ctrl-z xawtv + end + begin + prog = irxevent + button = mute + config = Key a xawtv + end + begin + prog = irxevent + button = vol+ + repeat = 1 + config = Key KP_Add xawtv + end + begin + prog = irxevent + button = vol- + repeat = 1 + config = Key KP_Subtract xawtv + end + begin + prog = irexec + button = 1 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = 2 + config = xawtv-remote setstation 1 + end + begin + prog = irexec + button = 3 + config = xawtv-remote setstation 2 + end + begin + prog = irexec + button = 4 + config = xawtv-remote setstation 3 + end + begin + prog = irexec + button = 5 + config = xawtv-remote setstation 4 + end + begin + prog = irexec + button = 6 + config = xawtv-remote setstation 5 + end + begin + prog = irexec + button = 7 + config = xawtv-remote setstation 6 + end + begin + prog = irexec + button = 8 + config = xawtv-remote setstation 7 + end + begin + prog = irexec + button = 9 + config = xawtv-remote setstation 8 + end + begin + prog = irexec + button = 0 + config = xawtv-remote setstation 0 + end + begin + prog = irexec + button = function + config = xawtv-remote attr next + end + begin + prog = irexec + button = fn+ + config = xawtv-remote attr inc + end + begin + prog = irexec + button = fn- + config = xawtv-remote attr dec + end + begin + prog = irexec + button = +100 + config = xawtv-remote msg " `date +%H:%M` " + end diff --git a/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 new file mode 100644 index 0000000..e488424 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/provideo/lircd.conf.pv951 @@ -0,0 +1,67 @@ +# +# this config file was automatically generated +# using lirc-0.6.1 on Wed May 24 23:10:08 2000 +# +# contributed by BartOwl +# +# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/ +# model: PV951 (http://www.jsir.com/pv951.htm) +# supported devices: Remote control for this TV-capture card +# +# The manufacturer seems to be ProVideo: http://www.provideo.com.tw +# Funny: they have Linux "drivers" for this card... +# + +begin remote + + name PV951 + bits 16 + flags SPACE_ENC|CONST_LENGTH + eps 30 + aeps 100 + + header 9067 4482 + one 597 1650 + zero 597 529 + ptrail 584 + repeat 9068 2232 + pre_data_bits 16 + pre_data 0x61D6 + gap 107983 + repeat_bit 0 + + begin codes + power 0x00000000000048B7 + air/cbl 0x000000000000D02F + pc/tv 0x0000000000008877 + source 0x000000000000F00F + mts 0x000000000000C837 + mute 0x00000000000008F7 + 1 0x000000000000807F + 2 0x00000000000040BF + 3 0x000000000000C03F + 4 0x00000000000020DF + 5 0x000000000000A05F + 6 0x000000000000609F + 7 0x000000000000E01F + 8 0x00000000000010EF + 9 0x000000000000906F + 0 0x00000000000000FF + +100 0x00000000000050AF + ch_rtn 0x000000000000E817 + ch+ 0x00000000000058A7 + ch- 0x0000000000007887 + vol+ 0x000000000000D827 + vol- 0x000000000000F807 + func 0x0000000000009867 + ttx 0x000000000000B04F + pg+ 0x000000000000708F + pg- 0x000000000000B847 + cc 0x0000000000006897 + sync 0x00000000000028D7 + ch+- 0x00000000000018E7 + autoscan 0x00000000000030CF + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id new file mode 100644 index 0000000..4070964 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/receiver_usb.id @@ -0,0 +1,33 @@ +0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc." +0bc7:0008|SnapStream_Firefly| "SnapStream Firefly" +10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver" +0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder" +0e9c:0000|streamzap| "Streamzap Remote" +0fe9:9010|dvico| "DVICO Remote:" +6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone " +1509:9242|MCEUSB-new| "FIC eHome Infrared Transceiver 1509/9242" +1934:0602|MCEUSB-new| "Fintek eHome Infrared Transceiver 1934/0602" +147a:e015|MCEUSB-new| "Formosa eHome Infrared Transceiver 147a/e015" +147a:e017|MCEUSB-new| "Formosa aim / Trust MCE Infrared Receiver147a/e017" +147a:e018|MCEUSB-new| "Formosa Industrial Computing 147a/e018" +107b:3009|MCEUSB-new| "Gateway eHome Infrared Transceiver 107b/3009" +195d:7002|MCEUSB-new| "Itron ione Libra Q-11 195d/7002" +043e:9803|MCEUSB-new| "LG eHome Infrared Transceiver 043e/9803" +045e:00a0|MCEUSB-new| "Microsoft MCE Infrared Transceiver 045e/00a0" +03ee:2501|MCEUSB-new| "Mitsumi 03ee/2501" +0471:060c|MCEUSB-new| "Philips Infrared Transciever - HP branded 0471/060C" +0471:060d|MCEUSB-new| "Philips SRM5100 0471/060d" +0471:0815|MCEUSB-new| "Philips eHome Infrared Transciever 0471/0815" +2304:0225|MCEUSB-new| "Pinnacle Systems, Inc. 2304/0225" +179d:0010|MCEUSB-new| "Ricavision internal Infrared Transceiver 179d/0010" +1308:c001|MCEUSB-new| "Shuttle eHome Infrared Transceiver 1308/c001" +051c:c001|MCEUSB-new| "Shuttle2 eHome Infrared Transceiver 051c/c001" +0609:031d|MCEUSB-new| "SMK/Toshiba G83C0004D410 0609/031d" +0609:0322|MCEUSB-new| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322" +0609:0334|MCEUSB-new| "SKM bundled with Hauppauge PVR-150 0609/0334" +1460:9150|MCEUSB-new| "Tatung eHome Infrared Transceiver 1460/9150" +1784:0001|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0001" +1784:0006|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0006" +1784:0007|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0007" +1784:0008|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0008" +045e:006d|MCEUSB-old| "USB Microsoft IR Transceiver Driver 045e/006d" diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 new file mode 100644 index 0000000..1797647 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircd.conf.BW6130 @@ -0,0 +1,88 @@ +# +# brand: Remotec +# model no. of remote control: BW 6130 Multimedia Master Receiver +# devices being controlled by this remote: +# + +begin remote + + name MEDIAMASTER + bits 32 + eps 0 + aeps 0 + + one 0 0 + zero 0 0 + pre_data_bits 32 + pre_data 0xFFA10003 + gap 131980 + post_data_bits 0 + toggle_bit 0 + + begin codes + PRE 0x23 + NEXT 0x24 + 1 0X10 + 2 0x11 + 3 0x12 + POWER 0x50 + VOL+ 0x30 + VOL- 0x31 + L 0x42 + R 0x44 + PAUSE 0x22 + PLAY 0x20 + STOP 0x21 + MUTE 0x32 + MOUSE_SLOW_N 0x95 + MOUSE_SLOW_NNE 0xd1 + MOUSE_SLOW_NE 0xcd + MOUSE_SLOW_ENE 0xc9 + MOUSE_SLOW_E 0xc5 + MOUSE_SLOW_ESE 0xe9 + MOUSE_SLOW_SE 0xed + MOUSE_SLOW_SSE 0xf1 + MOUSE_SLOW_S 0xb5 + MOUSE_SLOW_SSW 0xb1 + MOUSE_SLOW_SW 0xad + MOUSE_SLOW_WSW 0xa9 + MOUSE_SLOW_W 0x85 + MOUSE_SLOW_WNW 0x89 + MOUSE_SLOW_NW 0x8d + MOUSE_SLOW_NNW 0x91 + MOUSE_MEDIUM_N 0x96 + MOUSE_MEDIUM_NNE 0xd2 + MOUSE_MEDIUM_NE 0xce + MOUSE_MEDIUM_ENE 0xca + MOUSE_MEDIUM_E 0xc6 + MOUSE_MEDIUM_ESE 0xea + MOUSE_MEDIUM_SE 0xee + MOUSE_MEDIUM_SSE 0xf2 + MOUSE_MEDIUM_S 0xb6 + MOUSE_MEDIUM_SSW 0xb2 + MOUSE_MEDIUM_SW 0xae + MOUSE_MEDIUM_WSW 0xaa + MOUSE_MEDIUM_W 0x86 + MOUSE_MEDIUM_WNW 0x8a + MOUSE_MEDIUM_NW 0x8e + MOUSE_MEDIUM_NNW 0x92 + MOUSE_FAST_N 0x97 + MOUSE_FAST_NNE 0xd3 + MOUSE_FAST_NE 0xcf + MOUSE_FAST_ENE 0xcb + MOUSE_FAST_E 0xc7 + MOUSE_FAST_ESE 0xeb + MOUSE_FAST_SE 0xef + MOUSE_FAST_SSE 0xf3 + MOUSE_FAST_S 0xb7 + MOUSE_FAST_SSW 0xb3 + MOUSE_FAST_SW 0xaf + MOUSE_FAST_WSW 0xab + MOUSE_FAST_W 0x87 + MOUSE_FAST_WNW 0x8b + MOUSE_FAST_NW 0x8f + MOUSE_FAST_NNW 0x93 + end codes + +end remote + diff --git a/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 new file mode 100644 index 0000000..f056530 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/remotec/lircmd.conf.BW6130 @@ -0,0 +1,291 @@ +# +# lircmd config file +# simply copied/edited x10/mouseremote lircmd file +# + +PROTOCOL IntelliMouse +#PROTOCOL MouseSystems + +# ACCELERATOR start max multiplier + +TOGGLE_ACTIVATE MEDIAMASTER 3 + +ACCELERATOR 1 3 2 + + +MOVE_N MEDIAMASTER MOUSE_SLOW_N +MOVE_N MEDIAMASTER MOUSE_SLOW_N + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N +MOVE_N MEDIAMASTER MOUSE_MEDIUM_N + +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N +MOVE_N MEDIAMASTER MOUSE_FAST_N + +MOVE_N MEDIAMASTER MOUSE_SLOW_NNE +MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE + +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE +MOVE_N MEDIAMASTER MOUSE_FAST_NNE +MOVE_NE MEDIAMASTER MOUSE_FAST_NNE + +MOVE_NE MEDIAMASTER MOUSE_SLOW_NE +MOVE_NE MEDIAMASTER MOUSE_SLOW_NE + +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE + +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE +MOVE_NE MEDIAMASTER MOUSE_FAST_NE + +MOVE_E MEDIAMASTER MOUSE_SLOW_ENE +MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE +MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE + +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE +MOVE_E MEDIAMASTER MOUSE_FAST_ENE +MOVE_NE MEDIAMASTER MOUSE_FAST_ENE + +MOVE_E MEDIAMASTER MOUSE_SLOW_E +MOVE_E MEDIAMASTER MOUSE_SLOW_E + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E +MOVE_E MEDIAMASTER MOUSE_MEDIUM_E + +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E +MOVE_E MEDIAMASTER MOUSE_FAST_E + +MOVE_E MEDIAMASTER MOUSE_SLOW_ESE +MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE + +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE + +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE +MOVE_E MEDIAMASTER MOUSE_FAST_ESE +MOVE_SE MEDIAMASTER MOUSE_FAST_ESE + +MOVE_SE MEDIAMASTER MOUSE_SLOW_SE +MOVE_SE MEDIAMASTER MOUSE_SLOW_SE + +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE + +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE +MOVE_SE MEDIAMASTER MOUSE_FAST_SE + +MOVE_S MEDIAMASTER MOUSE_SLOW_SSE +MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE +MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE + +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE +MOVE_S MEDIAMASTER MOUSE_FAST_SSE +MOVE_SE MEDIAMASTER MOUSE_FAST_SSE + +MOVE_S MEDIAMASTER MOUSE_SLOW_S +MOVE_S MEDIAMASTER MOUSE_SLOW_S + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S +MOVE_S MEDIAMASTER MOUSE_MEDIUM_S + +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S +MOVE_S MEDIAMASTER MOUSE_FAST_S + +MOVE_S MEDIAMASTER MOUSE_SLOW_SSW +MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW + +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW + +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW +MOVE_S MEDIAMASTER MOUSE_FAST_SSW +MOVE_SW MEDIAMASTER MOUSE_FAST_SSW + +MOVE_SW MEDIAMASTER MOUSE_SLOW_SW +MOVE_SW MEDIAMASTER MOUSE_SLOW_SW + +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW + +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW +MOVE_SW MEDIAMASTER MOUSE_FAST_SW + +MOVE_W MEDIAMASTER MOUSE_SLOW_WSW +MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW +MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW + +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW +MOVE_W MEDIAMASTER MOUSE_FAST_WSW +MOVE_SW MEDIAMASTER MOUSE_FAST_WSW + +MOVE_W MEDIAMASTER MOUSE_SLOW_W +MOVE_W MEDIAMASTER MOUSE_SLOW_W + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W +MOVE_W MEDIAMASTER MOUSE_MEDIUM_W + +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W +MOVE_W MEDIAMASTER MOUSE_FAST_W + +MOVE_W MEDIAMASTER MOUSE_SLOW_WNW +MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW + +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW + +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW +MOVE_W MEDIAMASTER MOUSE_FAST_WNW +MOVE_NW MEDIAMASTER MOUSE_FAST_WNW + +MOVE_NW MEDIAMASTER MOUSE_SLOW_NW +MOVE_NW MEDIAMASTER MOUSE_SLOW_NW + +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW + +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW +MOVE_NW MEDIAMASTER MOUSE_FAST_NW + +MOVE_N MEDIAMASTER MOUSE_SLOW_NNW +MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW + +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW +MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW + +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW +MOVE_N MEDIAMASTER MOUSE_FAST_NNW +MOVE_NW MEDIAMASTER MOUSE_FAST_NNW + +BUTTON1_CLICK MEDIAMASTER L +BUTTON3_CLICK MEDIAMASTER R + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem new file mode 100644 index 0000000..da0fb82 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/sasem/lircd.conf.sasem @@ -0,0 +1,81 @@ +# +# this config file was automatically generated +# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 +# +# contributed by Oliver Stabel (oliver.stabel@gmx.de) +# +# brand: Sasem OnAir +# model no. of remote control: n/a +# devices being controlled by this remote: +# This IR came with the Dign HV5 HTPC case, manufactured +# by Uneed in Korea (www.iuneed.com). +# AFAIK the case is called Ahanix HV5 in the US. +# The IR/VFD device is originally manufactured by Sasem, +# and sold as OnAir Remocon-V (?looks different from +# mine but should be the same?) +# + +begin remote + + name lirc_sasem + bits 16 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 24 + pre_data 0x0C807F + post_data_bits 24 + post_data 0x000000 + gap 196000 + toggle_bit 0 + + + begin codes + 1 0x08F7 + 2 0x09F6 + 3 0x0AF5 + 4 0x10EF + 5 0x11EE + 6 0x12ED + 7 0x18E7 + 8 0x19E6 + 9 0x1AE5 + start 0x40BF + 0 0x41BE + full_down 0x06F9 + vol- 0x0FF0 + vol+ 0x0EF1 + esc 0x05FA + up 0x0BF4 + close 0x07F8 + left 0x03FC + enter 0x13EC + right 0x1BE4 + prev 0x0CF3 + down 0x43BC + next 0x01FE + mute 0x0DF2 + step 0x04FB + play_pause 0x49B6 + stop 0x48B7 + winamp 0x1EE1 + media_player 0x15EA + hdtv 0x17E8 + cd_player 0x16E9 + win_dvd 0x44BB + power_dvd 0x14EB + internet 0x46B9 + email 0x47B8 + a 0x45BA + b 0x1DE2 + c 0x1CE3 + d 0x1FE0 + eject 0x02FD + power 0x00FF + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic new file mode 100644 index 0000000..8aa4ef5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/sigma_designs/lircd.conf.realmagic @@ -0,0 +1,83 @@ +# +# this config file was automatically generated +# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 +# +# contributed by Stefan Neuwirth & Andreas Lange +# +# brand: Sigma Designs +# model: REALmagic remote control +# www.realmagic.com/support.htm#remote +# supported devices: +# "For Hollywood Plus Version 1.4 or above Driver only" +# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card +# receiver is connected to the serial port - it does not require the card +# +# The first byte always is 131. The second and third byte are equal. (CB) +# + +begin remote + + name REALmagic + bits 20 + eps 30 + aeps 100 + + one 0 0 + zero 0 0 + pre_data_bits 10 + pre_data 0x183 + gap 189974 + toggle_bit 0 + + + begin codes + 1 0x0000000000062D8B + 2 0x0000000000012C4B + 3 0x000000000001AC6B + 4 0x0000000000072DCB + 5 0x000000000000AC2B + 6 0x0000000000052D4B + +# Nicolas Vignal reported that this code is sent for his remote +# version (1.5). It should be no problem to just have two entries for +# "6" unless you want to send codes what won't work for this receiver +# anyway. + + 6 0x0000000000041505 + + 7 0x0000000000058561 + 8 0x0000000000044511 + 9 0x000000000004AD2B + 0 0x000000000004C531 + VOL+ 0x0000000000022C8B + VOL- 0x0000000000032CCB + MUTE 0x000000000006ADAB + L-R 0x0000000000052549 + VGA 0x0000000000054551 + ENTER 0x0000000000042509 + QUIT 0x0000000000058D63 + PRG 0x0000000000038CE3 + UP 0x0000000000078DE3 + DOWN 0x0000000000064D93 + LEFT 0x0000000000044D13 + RIGHT 0x000000000003ECFB + SELECT 0x0000000000024C93 + MENU 0x0000000000014C53 + TITLE 0x0000000000054D53 + OSD 0x0000000000034CD3 + LANG 0x0000000000074DD3 + ANGLE 0x000000000000CC33 + SUB 0x000000000004CD33 + PAUSE 0x000000000002CCB3 + STOP 0x000000000006CDB3 + PLAY 0x000000000001CC73 + EJECT 0x000000000005CD73 + REV 0x000000000003CCF3 + FF 0x000000000007CDF3 + PREV 0x0000000000002C0B + NEXT 0x0000000000042D0B + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek new file mode 100644 index 0000000..090afb9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircd.conf.silitek @@ -0,0 +1,97 @@ +# +# +# contributed by Krister Wicksell +# +# brand: Silitek +# model: SM-1000 +# supported devices: +# + +begin remote + + name SILITEK_SM-1000 + bits 24 + repeat_bit 0 + + begin codes + MOUSE_E 0x0000000000aa0001 + MOUSE_NEE 0x0000000000aa0102 + MOUSE_NE 0x0000000000aa0103 + MOUSE_NNE 0x0000000000aa0104 + MOUSE_N 0x0000000000aa0105 + MOUSE_NNW 0x0000000000aa1104 + MOUSE_NW 0x0000000000aa1103 + MOUSE_NWW 0x0000000000aa1102 + MOUSE_W 0x0000000000aa1001 + MOUSE_SWW 0x0000000000aa1002 + MOUSE_SW 0x0000000000aa1003 + MOUSE_SSW 0x0000000000aa1004 + MOUSE_S 0x0000000000aa0005 + MOUSE_SSE 0x0000000000aa0004 + MOUSE_SE 0x0000000000aa0003 + MOUSE_SEE 0x0000000000aa0002 + MOUSE_R_BUTTON 0x0000000000aaa0bb + MOUSE_L_BUTTON 0x0000000000aa0abb + MOUSE_L+R_BUTTON 0x0000000000aaaabb + + 0 0x0000000000bb4a75 + 1 0x0000000000bbc1fe + 2 0x0000000000bbc2fd + 3 0x0000000000bb437c + 4 0x0000000000bbc4fb + 5 0x0000000000bb457a + 6 0x0000000000bb4679 + 7 0x0000000000bbc7f8 + 8 0x0000000000bbc8f7 + 9 0x0000000000bb4976 + * 0x0000000000bbcbf4 + # 0x0000000000bb4c73 + REW 0x0000000000bb516e + FWD 0x0000000000bbd0ef + PAUSE 0x0000000000bbcef1 + PLAY 0x0000000000bbcdf2 + STOP 0x0000000000bb4f70 + VOLUME_UP 0x0000000000bbd3ec + VOLUME_DOWN 0x0000000000bb546b + MUTE 0x0000000000bb526d + DISPLAY 0x0000000000bbd5ea + CD 0x0000000000bbdae5 + SHOW_WIZ 0x0000000000bb5b64 + PG_UP 0x0000000000bbd6e9 + PG_DN 0x0000000000bb5768 + BACK 0x0000000000bb5867 + FORWARD 0x0000000000bbd9e6 + WWW 0x0000000000bbdce3 + CLOSE 0x0000000000bb5d62 + + 0_UP 0x0000000000cc4a75 + 1_UP 0x0000000000ccc1fe + 2_UP 0x0000000000ccc2fd + 3_UP 0x0000000000cc437c + 4_UP 0x0000000000ccc4fb + 5_UP 0x0000000000cc457a + 6_UP 0x0000000000cc4679 + 7_UP 0x0000000000ccc7f8 + 8_UP 0x0000000000ccc8f7 + 9_UP 0x0000000000cc4976 + *_UP 0x0000000000cccbf4 + #_UP 0x0000000000cc4c73 + REW_UP 0x0000000000cc516e + FWD_UP 0x0000000000ccd0ef + PAUSE_UP 0x0000000000cccef1 + PLAY_UP 0x0000000000cccdf2 + STOP_UP 0x0000000000cc4f70 + VOLUME_UP_UP 0x0000000000ccd3ec + VOLUME_DOWN_UP 0x0000000000cc546b + MUTE_UP 0x0000000000cc526d + DISPLAY_UP 0x0000000000ccd5ea + CD_UP 0x0000000000ccdae5 + SHOW_WIZ_UP 0x0000000000cc5b64 + PG_UP_UP 0x0000000000ccd6e9 + PG_DN_UP 0x0000000000cc5768 + BACK_UP 0x0000000000cc5867 + FORWARD_UP 0x0000000000ccd9e6 + WWW_UP 0x0000000000ccdce3 + CLOSE_UP 0x0000000000cc5d62 + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek new file mode 100644 index 0000000..fc93f79 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/silitek/lircmd.conf.silitek @@ -0,0 +1,72 @@ +# +# lircmd config file for the Silitek control +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 4 2 + +#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ + +MOVE_N SILITEK_SM-1000 MOUSE_N +MOVE_N SILITEK_SM-1000 MOUSE_N + +MOVE_N SILITEK_SM-1000 MOUSE_NNE +MOVE_NE SILITEK_SM-1000 MOUSE_NNE + +MOVE_NE SILITEK_SM-1000 MOUSE_NE +MOVE_NE SILITEK_SM-1000 MOUSE_NE + +MOVE_E SILITEK_SM-1000 MOUSE_NEE +MOVE_NE SILITEK_SM-1000 MOUSE_NEE + +MOVE_E SILITEK_SM-1000 MOUSE_E +MOVE_E SILITEK_SM-1000 MOUSE_E + +MOVE_E SILITEK_SM-1000 MOUSE_SEE +MOVE_SE SILITEK_SM-1000 MOUSE_SEE + +MOVE_SE SILITEK_SM-1000 MOUSE_SE +MOVE_SE SILITEK_SM-1000 MOUSE_SE + +MOVE_S SILITEK_SM-1000 MOUSE_SSE +MOVE_SE SILITEK_SM-1000 MOUSE_SSE + +MOVE_S SILITEK_SM-1000 MOUSE_S +MOVE_S SILITEK_SM-1000 MOUSE_S + +MOVE_S SILITEK_SM-1000 MOUSE_SSW +MOVE_SW SILITEK_SM-1000 MOUSE_SSW + +MOVE_SW SILITEK_SM-1000 MOUSE_SW +MOVE_SW SILITEK_SM-1000 MOUSE_SW + +MOVE_W SILITEK_SM-1000 MOUSE_SWW +MOVE_SW SILITEK_SM-1000 MOUSE_SWW + +MOVE_W SILITEK_SM-1000 MOUSE_W +MOVE_W SILITEK_SM-1000 MOUSE_W + +MOVE_W SILITEK_SM-1000 MOUSE_NWW +MOVE_NW SILITEK_SM-1000 MOUSE_NWW + +MOVE_NW SILITEK_SM-1000 MOUSE_NW +MOVE_NW SILITEK_SM-1000 MOUSE_NW + +MOVE_N SILITEK_SM-1000 MOUSE_NNW +MOVE_NW SILITEK_SM-1000 MOUSE_NNW + +MOVE_IN SILITEK_SM-1000 PG_UP +MOVE_OUT SILITEK_SM-1000 PG_DN + +BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY +#BUTTON2_TOGGLE SILITEK_SM-1000 5 +#BUTTON3_TOGGLE SILITEK_SM-1000 6 + +BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON +BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON +BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON + +# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf new file mode 100644 index 0000000..288bb51 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircd.snapstrm.conf @@ -0,0 +1,127 @@ +# Please make this file available to others +# by sending it to +# +# this config file was automatically generated +# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005 +# +# contributed by +# +# brand: Snapstream Firefly Remote +# model no. of remote control: +# devices being controlled by this remote: +# + +begin remote + +name Snapstream_Firefly +bits 40 +eps 30 +aeps 100 + +one 0 0 +zero 0 0 +gap 219964 +toggle_bit 0 + + +begin codes +MAXI 0x0000001481AC0000 +MAXI 0x00000014012C0000 +CLOSE 0x00000014D7020000 +CLOSE 0x0000001457820000 +1 0x00000014628D0000 +1 0x00000014E20D0000 +2 0x00000014E30E0000 +2 0x00000014638E0000 +3 0x00000014648F0000 +3 0x00000014E40F0000 +4 0x00000014E5100000 +4 0x0000001465900000 +5 0x0000001466910000 +5 0x00000014E6110000 +6 0x00000014E7120000 +6 0x0000001467920000 +7 0x0000001468930000 +7 0x00000014E8130000 +8 0x00000014E9140000 +8 0x0000001469940000 +9 0x000000146A950000 +9 0x00000014EA150000 +0 0x00000014EC170000 +0 0x000000146C970000 +BACK 0x000000146B960000 +BACK 0x00000014EB160000 +ENT 0x00000014ED180000 +ENT 0x000000146D980000 +VOL+ 0x000000145E890000 +VOL+ 0x00000014DE090000 +VOL- 0x000000145D880000 +VOL- 0x00000014DD080000 +MUTE 0x000000145F8A0000 +MUTE 0x00000014DF0A0000 +FIREFLY 0x0000001455800000 +FIREFLY 0x00000014D5000000 +CH+ 0x00000014608B0000 +CH+ 0x00000014E00B0000 +CH- 0x00000014618C0000 +CH- 0x00000014E10C0000 +INFO 0x0000001483AE0000 +INFO 0x00000014032E0000 +OPTION 0x0000001484AF0000 +OPTION 0x00000014042F0000 +UP 0x000000146F9A0000 +UP 0x00000014EF1A0000 +LEFT 0x00000014729D0000 +LEFT 0x00000014F21D0000 +DOWN 0x0000001477A20000 +DOWN 0x00000014F7220000 +RIGHT 0x00000014749F0000 +RIGHT 0x00000014F41F0000 +OK 0x00000014739E0000 +OK 0x00000014F31E0000 +MENU 0x00000014719C0000 +MENU 0x00000014F11C0000 +EXIT 0x0000001475A00000 +EXIT 0x00000014F5200000 +REC 0x00000014FC270000 +REC 0x000000147CA70000 +PLAY 0x00000014FA250000 +PLAY 0x000000147AA50000 +STOP 0x00000014FD280000 +STOP 0x000000147DA80000 +REW 0x00000014F9240000 +REW 0x0000001479A40000 +FWD 0x00000014FB260000 +FWD 0x000000147BA60000 +PREV 0x00000014002B0000 +PREV 0x0000001480AB0000 +PAUSE 0x00000014FE290000 +PAUSE 0x000000147EA90000 +NEXT 0x00000014FF2A0000 +NEXT 0x000000147FAA0000 +MUSIC 0x00000014DB060000 +MUSIC 0x000000145B860000 +PHOTOS 0x00000014DA050000 +PHOTOS 0x000000145A850000 +DVD 0x00000014D9040000 +DVD 0x0000001459840000 +TV 0x00000014D8030000 +TV 0x0000001458830000 +VIDEO 0x00000014DC070000 +VIDEO 0x000000145C870000 +HELP 0x00000014D6010000 +HELP 0x0000001456810000 +MOUSE 0x00000014022D0000 +MOUSE 0x0000001482AD0000 +A 0x00000014EE190000 +A 0x000000146E990000 +B 0x00000014F01B0000 +B 0x00000014709B0000 +C 0x00000014F6210000 +C 0x0000001476A10000 +D 0x00000014F8230000 +D 0x0000001478A30000 + +end codes + +end remote \ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt new file mode 100644 index 0000000..e918011 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt @@ -0,0 +1,590 @@ +# ~/.mythtv/lircrc +# +# MythTV native LIRC config file for +# the new grey Hauppauge remote +# +# Modified from Jarod Wilson's which came from Jeff Campbell's +# By Brad Templeton + + +# Here we have the jump point commands. They only work if you have +# defined function keys for these jump points. For me the most +# common command is the menu of recordings, so I put that on "videos" +# even though that's counter-intuitive + +begin +prog = mythtv +button = TV +repeat = 3 +config = F5 +end + +begin +prog = mythtv +button = Videos +repeat = 3 +config = F2 +end + +# Not yet defined +begin +prog = mythtv +button = Music +repeat = 3 +config = Up +end + +# Given another function for now, I don't use mythgallery +begin +prog = mythtv +button = Pictures +repeat = 3 +config = F +end + +begin +prog = mythtv +button = Guide +repeat = 3 +config = F3 +end + +# I stuck the "todo" list on here as Myth has no radio function +begin +prog = mythtv +button = Radio +repeat = 3 +config = F4 +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = LEFT +repeat = 3 +config = Left +end + +begin +prog = mythtv +button = RIGHT +repeat = 3 +config = Right +end + +# Channel Up +begin +prog = mythtv +button = Channel-UP +repeat = 3 +config = Up +end + +# Channel Down +begin +prog = mythtv +button = Channel-DOWN +repeat = 3 +config = Down +end + +# OK/Select +begin +prog = mythtv +button = Ok +config = Space +end + +# Play +begin +prog = mythtv +button = Play +config = Return +end + +# Stop +begin +prog = mythtv +button = Stop +config = I +end + +# Escape/Exit/Back +begin +prog = mythtv +button = BACK +config = Esc +end + +# Power Off/Exit +begin +prog = mythtv +button = POWER +config = Esc +end + + +# Pause +begin +prog = mythtv +button = Pause +repeat = 3 +config = P +end + +# Mute +begin +prog = mythtv +button = Mute +repeat = 3 +config = | +end + +# Fast forward (30 sec default) +begin +prog = mythtv +button = Rewind +repeat = 3 +config = PgUp +end + +# Rewind (10 sec default) +begin +prog = mythtv +button = Forward +repeat = 3 +config = PgDown +end + +# Skip forward (10 min default) +begin +prog = mythtv +button = Next +repeat = 3 +config = End +end + +# Skip backward (10 min default) +begin +prog = mythtv +button = Previous +repeat = 3 +config = Home +end + +# Record +begin +prog = mythtv +button = Record +repeat = 3 +config = R +end + +# Delete +begin +prog = mythtv +button = Red +repeat = 3 +config = D +end + +# Decrease play speed +begin +prog = mythtv +button = Green +repeat = 3 +config = J +end + +# Display EPG while in live TV, +# View selected show while in EPG +begin +prog = mythtv +button = Menu +repeat = 3 +config = M +end + +# Scroll up +begin +prog = mythtv +button = Volume-UP +repeat = 3 +config = F11 +end + +# Scroll down +begin +prog = mythtv +button = Volume-DOWN +repeat = 3 +config = F10 +end + +# Bring up OSD info +begin +prog = mythtv +button = Go +repeat = 3 +config = I +end + +# Change display aspect ratio +begin +prog = mythtv +button = Prev-Channel +repeat = 3 +config = W +end + +# double speed watch +begin +prog = mythtv +button = Yellow +repeat = 3 +config = J +end + +# change tuners +#begin +#prog = mythtv +#button = hash +#repeat = 3 +#config = Y +#end + +# Bring up Time stretch +begin +prog = mythtv +button = Blue +repeat = 3 +config = Y +end + +# Numbers 0-9 + +begin +prog = mythtv +button = 0 +repeat = 3 +config = 0 +end + +begin +prog = mythtv +button = 1 +repeat = 3 +config = 1 +end + +begin +prog = mythtv +button = 2 +repeat = 3 +config = 2 +end + +begin +prog = mythtv +button = 3 +repeat = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +repeat = 3 +config = 4 +end + +begin +prog = mythtv +button = 5 +repeat = 3 +config = 5 +end + +begin +prog = mythtv +button = 6 +repeat = 3 +config = 6 +end + +begin +prog = mythtv +button = 7 +repeat = 3 +config = 7 +end + +begin +prog = mythtv +button = 8 +repeat = 3 +config = 8 +end + +begin +prog = mythtv +button = 9 +repeat = 3 +config = 9 +end + + +### MPlayer lirc setup + +# Show OSD +begin +prog = mplayer +button = MENU +repeat = 3 +config = osd +end + +# Pause playback +begin +prog = mplayer +button = PAUSE +repeat = 3 +config = pause +end + +# Skip ahead a minute if playing +# If paused, resume playing +begin +prog = mplayer +button = PLAY +repeat = 3 +config = seek +1 +end + +# Stop playback and exit +begin +prog = mplayer +button = Back +repeat = 3 +config = quit +end + +# Mute +begin +prog = mplayer +button = MUTE +repeat = 3 +config = mute +end + +# Seek back 10 seconds +begin +prog = mplayer +button = LEFT +repeat = 3 +config = seek -7 +end + +# Seek forward 30 seconds +begin +prog = mplayer +button = RIGHT +repeat = 3 +config = seek +30 +end + +# Quit +begin +prog = mplayer +button = EXIT +repeat = 3 +config = quit +end + +# Seek forward 10 minutes +begin +prog = mplayer +button = SKIP +repeat = 3 +config = seek +600 +end + +# Seek backward 10 minutes +begin +prog = mplayer +button = REPLAY +repeat = 3 +config = seek -600 +end + +# Toggle full-screen +begin +prog = mplayer +button = FULL +repeat = 3 +config = vo_fullscreen +end + +### Xine lirc setup + +begin +prog = xine +button = PLAY +repeat = 3 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 3 +config = Stop +end + +begin +prog = xine +button = OFF +repeat = 3 +config = Quit +end + +begin +prog = xine +button = PAUSE +repeat = 3 +config = Pause +end + +begin +prog = xine +button = CH+ +repeat = 3 +config = EventUp +end + +begin +prog = xine +button = CH- +repeat = 3 +config = EventDown +end + +begin +prog = xine +button = VOL- +repeat = 3 +config = EventLeft +end + +begin +prog = xine +button = VOL+ +repeat = 3 +config = EventRight +end + +begin +prog = xine +button = OK +repeat = 3 +config = EventSelect +end + +begin +prog = xine +button = BACK +repeat = 3 +config = Menu +end + +begin +prog = xine +button = FFW +repeat = 3 +#config = SpeedFaster +config = SeekRelative+60 +end + +begin +prog = xine +button = REW +repeat = 3 +#config = SpeedSlower +config = SeekRelative-60 +end + +begin +prog = xine +button = FULL +repeat = 3 +config = Volume+ +end + +begin +prog = xine +button = BLANK +repeat = 3 +config = Volume- +end + +begin +prog = xine +button = MUTE +repeat = 3 +config = Mute +end + +begin +prog = xine +button = MENU +repeat = 3 +config = RootMenu +end + +begin +prog = xine +button = SKIP +repeat = 3 +config = EventNext +end + +begin +prog = xine +button = REPLAY +repeat = 3 +config = EventPrior +end + +begin +prog = xine +button = GO +repeat = 3 +config = OSDStreamInfos +end + +begin +prog = xine +button = RED +repeat = 3 +config = Quit +end + +begin +prog = xine +button = RED +repeat = 3 +config = Quit +end \ No newline at end of file diff --git a/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg new file mode 100644 index 0000000..a1fbc6e Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/snapstream_firefly/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap new file mode 100644 index 0000000..8e453b9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircd.conf.streamzap @@ -0,0 +1,69 @@ +# +# this config file was automatically generated +# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 +# +# contributed by Christoph Bartelmus +# +# brand: Streamzap +# model no. of remote control: PC Remote +# devices being controlled by this remote: USB receiver +# + +begin remote + + name Streamzap_PC_Remote + bits 6 + flags RC5|CONST_LENGTH + eps 30 + aeps 100 + + one 889 889 + zero 889 889 + plead 889 + pre_data_bits 8 + pre_data 0xA3 + gap 108344 + toggle_bit 2 + + + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + POWER 0x0A + MUTE 0x0B + CH_UP 0x0C + VOL_UP 0x0D + CH_DOWN 0x0E + VOL_DOWN 0x0F + UP 0x10 + LEFT 0x11 + OK 0x12 + RIGHT 0x13 + DOWN 0x14 + MENU 0x15 + EXIT 0x16 + PLAY 0x17 + PAUSE 0x18 + STOP 0x19 + |<< 0x1A + >>| 0x1B + RECORD 0x1C + << 0x1D + >> 0x1E + RED 0x20 + GREEN 0x21 + YELLOW 0x22 + BLUE 0x23 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc new file mode 100755 index 0000000..5e668b5 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/streamzap/lircrc @@ -0,0 +1,832 @@ +# StreamZap Remote +# 'config' must either be a literal key, e.g. 'config = l' or must +# refer to a defined key in MythTV, e.g. 'config = PLAY'a + + +#restart frontend +begin + remote = RS_LD + button = RESET + prog = irexec + repeat = 0 + config = /usr/bin/restartfrontend.sh +end + +#time +begin + remote = RS_LD + button = TIME + prog = irexec + repeat = 10 + config = /usr/bin/saytime.sh +end + +#screen blank +begin + remote = RS_LD + button = BLANK + prog = irexec + repeat = 0 +# config = ls + config = xset s activate ; xset s blank +end + + +#picture +begin +REMOTE = RS_LD +prog = mythtv +button = PICTURE +repeat = 4 +config = f +end + +#change aspect +begin +remote = RS_LD +prog = mythtv +button = ASPECT +# change aspect ratio +config = w +end + +#Browse +begin +remote = RS_LD +prog = mythtv +button = BROWSE +repeat = 8 +config = o +end + +# delete key +begin +remote = RS_LD +prog = mythtv +button = DELETE +repeat = 8 +config = d +end + + +#change card +begin +remote = RS_LD +prog = mythtv +button = CARD +repeat = 8 +config = y +end + +# Change TV card input +begin +remote = RS_LD +prog = mythtv +button = CARD_SOURCE +repeat = 4 +config = C +end + + + +# Cycle through channel history +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = BLUE +repeat = 4 +config = H +end + +# Bring up OSD info +begin +remote = Streamzap_PC_Remote +prog = mythtv +button = YELLOW +repeat = 4 +config = i +end + + + + +begin +prog = mythtv +button = 0 +config = 0 +end + +begin +prog = mythtv +button = 1 +config = 1 +end + +begin +prog = mythtv +button = 2 +config = 2 +end + +begin +prog = mythtv +button = 3 +config = 3 +end + +begin +prog = mythtv +button = 4 +config = 4 +end + +begin +prog = mythtv +button = 5 +config = 5 +end + +begin +prog = mythtv +button = 6 +config = 6 +end + +begin +prog = mythtv +button = 7 +config = 7 +end + +begin +prog = mythtv +button = 8 +config = 8 +end + +begin +prog = mythtv +button = 9 +config = 9 +end + +begin +prog = mythtv +button = POWER +config = Esc +end + +# ??? +begin +prog = mythtv +button = MUTE +config = F9 +end + +begin +prog = mythtv +button = CH_UP +repeat = 3 +config = PgUp +end + +begin +prog = mythtv +button = VOL_UP +repeat = 3 +config = ] +end + +begin +prog = mythtv +button = CH_DOWN +repeat = 3 +config = PgDown +end + +begin +prog = mythtv +button = VOL_DOWN +repeat = 3 +config = [ +end + +begin +prog = mythtv +button = UP +repeat = 3 +config = Up +end + +begin +prog = mythtv +button = LEFT +# navigates, or skips back during playback or live tv. +config = Left +end + +begin +prog = mythtv +button = OK +config = Return +end + +begin +prog = mythtv +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = Right +end + +begin +prog = mythtv +button = DOWN +repeat = 3 +config = Down +end + +begin +prog = mythtv +button = MENU +config = m +end + +begin +prog = mythtv +button = EXIT +config = Esc +end + +begin +prog = mythtv +button = PLAY +config = Space +end + +begin +prog = mythtv +button = PAUSE +config = p +end + +begin +prog = mythtv +button = STOP +config = Esc +end + +begin +prog = mythtv +# skip backward +button = |<< +config = PgUp +end + +begin +prog = mythtv +# skip forward +button = >>| +config = PgDown +end + +begin +prog = mythtv +button = RECORD +config = r +end + +begin +prog = mythtv +# rewind +button = << +config = Home +end + +begin +prog = mythtv +# fast forward +button = >> +config = End +end + +begin +prog = mythtv +button = RED +# Delete +config = d +end + +begin +prog = mythtv +button = GREEN +# Info +config = i +end + +#begin +#prog = mythtv +#button = YELLOW +# change aspect ratio +#config = w +#end + +begin +prog = mythtv +button = BLUE +config = Tab +end + +# MPLAYER +begin +prog = mplayer +button = POWER +config = quit +end + +begin +prog = mplayer +button = MUTE +config = mute +end + +begin +prog = mplayer +button = VOL_UP +repeat = 3 +config = volume +1 +end + +begin +prog = mplayer +button = VOL_DOWN +repeat = 3 +config = volume -1 +end + +begin +prog = mplayer +button = UP +repeat = 3 +config = seek +10 +end + +begin +prog = mplayer +button = LEFT +# navigates, or skips back during playback or live tv. +config = seek -60 +end + +begin +prog = mplayer +button = RIGHT +# navigates, or skips forwards during playback or live tv. +config = seek +60 +end + +begin +prog = mplayer +button = DOWN +repeat = 3 +config = seek -10 +end + +begin +prog = mplayer +button = EXIT +config = quit +end + +begin +prog = mplayer +button = play +config = speed_set 1.0 +end + +begin + prog = mplayer + button = pause + config = pause +end + +begin +prog = mplayer +button = STOP +config = quit +end + +begin +prog = mplayer +# skip backward +button = |<< +config = seek -600 +end + +begin +prog = mplayer +# skip forward +button = >>| +config = seek +600 +end + +begin +prog = mplayer +# slow forward +button = << +config = speed_mult 0.5 +end + +begin +prog = mplayer +# fast forward +button = >> +config = speed_mult 2.0 +end + +### xine commands + +begin +prog = xine +button = YELLOW +repeat = 4 +#config = ToggleVisiblity +config = OSDStreamInfos +end + +begin +prog = xine +button = MENU +repeat = 4 +config = SeekRelative+60 +end + +# increase brightness by 10 +begin + button = DELETE + prog = xine + repeat = 4 + config = BrightnessControl+ +end + +# decrease brightness by 10 +begin + button = PICTURE + prog = xine + repeat = 4 + config = BrightnessControl- +end + + +begin +prog = xine +button = PAUSE +repeat = 4 +config = Pause +end + +begin +prog = xine +button = PLAY +repeat = 4 +config = Play +end + +begin +prog = xine +button = STOP +repeat = 4 +config = quit +end + +begin +prog = xine +button = MUTE +repeat = 4 +config = mute +end + +begin +prog = xine +button = << +repeat = 4 +config = SeekRelative-30 +end + +begin +prog = xine +button = >> +repeat = 4 +#config = SeekRelative+30 +config = SpeedFaster +end + +begin +prog = xine +button = POWER +repeat = 4 +config = quit +end + +begin +prog = xine +button = EXIT +repeat = 4 +config = quit +end + + +begin +prog = xine +button = FREEZE +repeat = 4 +config = SeekRelative+1200 +end + +begin +prog = xine +button = MOVE +repeat = 4 +config = SeekRelative-1200 +end + +begin +prog = xine +button = 3 +config = SpuNext +repeat = 0 +end + +# Select previous sub picture (subtitle) channel. +begin +button = 1 +prog = xine +repeat = 0 +config = SpuPrior +end + +# Select next audio channel. +begin +button = 9 +prog = xine +repeat = 0 +config = AudioChannelNext +end + +# Select previous audio channel. +begin +button = 7 +prog = xine +repeat = 0 +config = AudioChannelPrior +end + + + +# Up event. +begin + +button = UP +prog = xine +repeat = 8 +config = EventUp +end + +# Down event. +begin + +button = DOWN +prog = xine +repeat = 8 +config = EventDown +end + +# Left event. +begin + +button = LEFT +prog = xine +repeat = 8 +config = EventLeft +end + +# Right event. +begin + +button = RIGHT +prog = xine +repeat = 8 +config = EventRight +end + +# Select event. +begin +prog = xine +button = ok +repeat = 8 +config = EventSelect +end + +# Down Chapter +begin + +button = CH_DOWN +prog = xine +repeat = 8 +config = EventPrior +end + +# Next Chapter. +begin + +button = CH_UP +prog = xine +repeat = 8 +config = EventNext +end + +# menu. +begin + +button = record +prog = xine +repeat = 8 +config = RootMenu +end + +# Toggle aspect ratio +begin +prog = xine +button = ASPECT +repeat = 0 +config = ToggleAspectRatio +end + + + +#######xmms +begin xmms + begin + prog = xmms + button = PLAY + config = PLAY + end + begin + prog = xmms + button = clear + config = PLAYLIST_CLEAR + end + begin + prog = xmms + button = load + config = PLAYLIST_ADD .xmms/xmms.m3u + end + begin + prog = xmms + button = PAUSE + config = PAUSE + end + begin + prog = xmms + button = STOP + config = STOP + end + begin + prog = xmms + button = EXIT + config = QUIT + flags = mode + end + + begin + prog = xmms + button = POWER + config = QUIT + flags = mode + end + + begin + prog = xmms + button = CH_UP + config = NEXT + end + begin + prog = xmms + button = CH_DOWN + config = PREV + end + + + +begin + prog = xmms + button = >>| + config = NEXT + end +begin + prog = xmms + button = |<< + config = PREV +end + + +begin + prog = xmms + button = << + config = FWD 10 + repeat = 2 + end + begin + prog = xmms + button = << + config = BWD 10 + repeat = 2 + end + begin + prog = xmms + button = volup + config = VOL_UP 10 + repeat = 2 + end + begin + prog = xmms + button = voldown + config = VOL_DOWN 10 + repeat = 2 + end + begin + prog = xmms + button = 1 + config = ONE + end + begin + prog = xmms + button = 2 + config = TWO + end + begin + prog = xmms + button = 3 + config = THREE + end + begin + prog = xmms + button = 4 + config = FOUR + end + begin + prog = xmms + button = 5 + config = FIVE + end + begin + prog = xmms + button = 6 + config = SIX + end + begin + prog = xmms + button = 7 + config = SEVEN + end + begin + prog = xmms + button = 8 + config = EIGHT + end + begin + prog = xmms + button = 9 + config = NINE + end + begin + prog = xmms + button = 0 + config = ZERO + end + begin + prog = xmms + button = enter + config = SETPOS + end +end xmms + +# + + + + + + + + + + + + + + + + + + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg new file mode 100644 index 0000000..4d1a5fe Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/streamzap/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI new file mode 100644 index 0000000..6dd84f9 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/technisat/lircd.conf.mediafocusI @@ -0,0 +1,42 @@ +# +# this config file was automatically generated +# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000 +# +# contributed by Peter Schlaf +# +# brand: Technisat +# model: +# supported devices: MediaFocus PC card +# + +begin remote + + name TECHNISAT + bits 10 + flags SPACE_ENC|CONST_LENGTH + eps 20 + aeps 150 + + one 141 7590 + zero 141 5090 + ptrail 141 + pre_data_bits 1 + pre_data 0x1 + gap 121440 + repeat_bit 0 + toggle_bit 2 + + frequency 38000 + duty_cycle 33 + + begin codes + MUTE 0x0000000000000046 + VOL+ 0x000000000000006E + VOL- 0x000000000000006F + CH+ 0x0000000000000047 + CH- 0x0000000000000048 + end codes + +end remote + + diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 new file mode 100644 index 0000000..9562f60 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircd.conf.m230 @@ -0,0 +1,48 @@ +# +# This is for the remote that Tekram bundles with its M230 card (Mach64) +# Commands from the remote are hardware-decoded +# +# contributed by Froenchenko Leonid +# +# brand: Tekram M230 (ATI Mach64) +# supported devices: This remote control comes with TV Tuner cards from +# Tekram based on ATI 264VT (btt829) +# + +begin remote + name M230 + bits 8 + begin codes + 0 0x00 + 1 0x01 + 2 0x02 + 3 0x03 + 4 0x04 + 5 0x05 + 6 0x06 + 7 0x07 + 8 0x08 + 9 0x09 + RECALL 0x0A + ENTER 0x17 + POWER 0x1C + SOURCE 0x15 + PC_VID 0x12 + STILL 0x11 + TTX 0x0F + FAV 0x13 + MUTE 0x10 + VOL_UP 0x1A + VOL_DN 0x1E + CH_UP 0x1B + CH_DN 0x1F + PLAY 0x0D + STOP 0x0E + REW 0x1D + FFW 0x19 + ADD_ER 0x16 + FUNC 0x14 + F_PLUS 0x18 + F_MINUS 0x0C + end codes +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 new file mode 100644 index 0000000..0bacf5d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/tekram/lircmd.conf.m230 @@ -0,0 +1,33 @@ +# +# lircmd config file for Tekram remote control +# Contributed by Froenchenko Leonid +# + +PROTOCOL IntelliMouse + +# ACCELERATOR start max multiplier + +#ACCELERATOR 2 30 5 + +ACTIVATE * MOUSE_MODE + +MOVE_N * 2 +MOVE_NE * 3 +MOVE_E * 6 +MOVE_SE * 9 +MOVE_S * 8 +MOVE_SW * 7 +MOVE_W * 4 +MOVE_NW * 1 + +# These are lircmd-0.5.5 extensions +MOVE_IN * VOL_UP +MOVE_OUT * VOL_DN + +BUTTON1_CLICK * RECALL +BUTTON2_CLICK * 0 +BUTTON3_CLICK * ENTER + +BUTTON1_TOGGLE * PLAY +BUTTON2_TOGGLE * STOP +BUTTON3_TOGGLE * REW diff --git a/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg new file mode 100644 index 0000000..a034186 Binary files /dev/null and b/abs/core-testing/LinHES-config/templates/remotes/unknown/preview.jpg differ diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote new file mode 100644 index 0000000..73df340 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mouseremote @@ -0,0 +1,116 @@ +# +# +# contributed by Isaac Lauer +# modified by Shawn Nycz +# modified by Brian Craft +# +# brand: X10 +# model: MP3 MouseRemote, Model mk19a +# + +begin remote + + name mouseremote + bits 16 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + pre_data_bits 8 + pre_data 0x08 + post_data_bits 8 + post_data 0x7f + min_repeat 2 + gap 140000 + + begin codes + POWER 0x000000000000000F + PC 0x000000000000002B + LAST 0x000000000000004F + CHANUP 0x0000000000000002 + CHANDOWN 0x0000000000000003 + VOLUP 0x0000000000000006 + VOLDOWN 0x0000000000000007 + MUTE 0x0000000000000005 + 1 0x0000000000000041 + 2 0x0000000000000042 + 3 0x0000000000000043 + 4 0x0000000000000044 + 5 0x0000000000000045 + 6 0x0000000000000046 + 7 0x0000000000000047 + 8 0x0000000000000048 + 9 0x0000000000000049 + 0 0x0000000000000040 + ENTER 0x000000000000004a + ADOTB 0x000000000000005D + REWIND 0x000000000000001C + PLAY 0x000000000000000D + FFWD 0x000000000000001D + STOP 0x000000000000000E + PAUSE 0x000000000000004E + RECORD 0x00000000000000FF + ENTER 0x000000000000004A + LAST 0x000000000000004F + DISP 0x000000000000005C + SHIFT 0x000000000000006B + GUIDE 0x000000000000006D + SELECT 0x0000000000000093 + PHONE 0x000000000000004B + WEB 0x000000000000008B + CD 0x00000000000000AB + DVD 0x00000000000000CB + MOUSE_SLOW_N 0x0000000000000110 + MOUSE_SLOW_NNE 0x0000000000000131 + MOUSE_SLOW_NE 0x0000000000000111 + MOUSE_SLOW_ENE 0x0000000000000113 + MOUSE_SLOW_E 0x0000000000000101 + MOUSE_SLOW_ESE 0x0000000000000193 + MOUSE_SLOW_SE 0x0000000000000191 + MOUSE_SLOW_SSE 0x00000000000001B1 + MOUSE_SLOW_S 0x0000000000000190 + MOUSE_SLOW_SSW 0x00000000000001B9 + MOUSE_SLOW_SW 0x0000000000000199 + MOUSE_SLOW_WSW 0x000000000000019B + MOUSE_SLOW_W 0x0000000000000109 + MOUSE_SLOW_WNW 0x000000000000011B + MOUSE_SLOW_NW 0x0000000000000119 + MOUSE_SLOW_NNW 0x0000000000000139 + MOUSE_MEDIUM_N 0x0000000000000310 + MOUSE_MEDIUM_NNE 0x0000000000000331 + MOUSE_MEDIUM_NE 0x0000000000000311 + MOUSE_MEDIUM_ENE 0x0000000000000313 + MOUSE_MEDIUM_E 0x0000000000000301 + MOUSE_MEDIUM_ESE 0x0000000000000393 + MOUSE_MEDIUM_SE 0x0000000000000391 + MOUSE_MEDIUM_SSE 0x00000000000003B1 + MOUSE_MEDIUM_S 0x0000000000000390 + MOUSE_MEDIUM_SSW 0x00000000000003B9 + MOUSE_MEDIUM_SW 0x0000000000000399 + MOUSE_MEDIUM_WSW 0x000000000000039B + MOUSE_MEDIUM_W 0x0000000000000309 + MOUSE_MEDIUM_WNW 0x000000000000031B + MOUSE_MEDIUM_NW 0x0000000000000319 + MOUSE_MEDIUM_NNW 0x0000000000000339 + MOUSE_FAST_N 0x0000000000000510 + MOUSE_FAST_NNE 0x0000000000000531 + MOUSE_FAST_NE 0x0000000000000511 + MOUSE_FAST_ENE 0x0000000000000513 + MOUSE_FAST_E 0x0000000000000501 + MOUSE_FAST_ESE 0x0000000000000593 + MOUSE_FAST_SE 0x0000000000000591 + MOUSE_FAST_SSE 0x00000000000005B1 + MOUSE_FAST_S 0x0000000000000590 + MOUSE_FAST_SSW 0x00000000000005B9 + MOUSE_FAST_SW 0x0000000000000599 + MOUSE_FAST_WSW 0x000000000000059B + MOUSE_FAST_W 0x0000000000000509 + MOUSE_FAST_WNW 0x000000000000051B + MOUSE_FAST_NW 0x0000000000000519 + MOUSE_FAST_NNW 0x0000000000000539 + BUTTONR_DOWN 0x0000000000000801 + BUTTONL_DOWN 0x0000000000000804 + BUTTON_UP 0x0000000000000800 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere new file mode 100644 index 0000000..c9bb727 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircd.conf.mp3anywhere @@ -0,0 +1,64 @@ +# +# +# contributed by Isaac Lauer +# modified by Shawn Nycz +# +# brand: X10 +# model: MP3 Anywhere Remote, Model UR81A +# supported devices: at least FireCracker Receiver Model MR26A, maybe more +# + +begin remote + + name mp3anywhere + bits 8 + eps 30 + aeps 100 + one 0 0 + zero 0 0 + pre_data_bits 24 + pre_data 0xD5AAEE + min_repeat 2 + gap 140000 + + begin codes + POWER 0x00000000000000F0 + PC 0x00000000000000D4 + LAST 0x00000000000000F2 + CHANUP 0x0000000000000040 + CHANDOWN 0x00000000000000C0 + VOLUP 0x0000000000000060 + VOLDOWN 0x00000000000000E0 + MUTE 0x00000000000000A0 + ONE 0x0000000000000082 + TWO 0x0000000000000042 + THREE 0x00000000000000C2 + FOUR 0x0000000000000022 + FIVE 0x00000000000000A2 + SIX 0x0000000000000062 + SEVEN 0x00000000000000E2 + EIGHT 0x0000000000000012 + NINE 0x0000000000000092 + ZERO 0x0000000000000002 + ENTER 0x0000000000000052 + ADOTB 0x00000000000000BA + A 0x000000000000003A + B 0x00000000000000D8 + C 0x00000000000000D6 + D 0x00000000000000D4 + MENU 0x00000000000000B6 + EXIT 0x00000000000000C9 + UP 0x00000000000000D5 + DOWN 0x00000000000000D3 + LEFT 0x00000000000000D2 + RIGHT 0x00000000000000D1 + OK 0x0000000000000052 + REWIND 0x0000000000000038 + PLAY 0x00000000000000B0 + FFWD 0x00000000000000B8 + RECORD 0x00000000000000FF + STOP 0x0000000000000070 + PAUSE 0x0000000000000072 + end codes + +end remote diff --git a/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote new file mode 100644 index 0000000..c3c23b1 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/remotes/x10/lircmd.conf.mouseremote @@ -0,0 +1,288 @@ +# +# lircmd config file for the mouseremote control +# + +# ACCELERATOR start max multiplier + +ACCELERATOR 1 3 2 + +#ACTIVATE * MENU + + +MOVE_N mouseremote MOUSE_SLOW_N +MOVE_N mouseremote MOUSE_SLOW_N + +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N +MOVE_N mouseremote MOUSE_MEDIUM_N + +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N +MOVE_N mouseremote MOUSE_FAST_N + +MOVE_N mouseremote MOUSE_SLOW_NNE +MOVE_NE mouseremote MOUSE_SLOW_NNE + +MOVE_N mouseremote MOUSE_MEDIUM_NNE +MOVE_NE mouseremote MOUSE_MEDIUM_NNE +MOVE_N mouseremote MOUSE_MEDIUM_NNE +MOVE_NE mouseremote MOUSE_MEDIUM_NNE + +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE +MOVE_N mouseremote MOUSE_FAST_NNE +MOVE_NE mouseremote MOUSE_FAST_NNE + +MOVE_NE mouseremote MOUSE_SLOW_NE +MOVE_NE mouseremote MOUSE_SLOW_NE + +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE +MOVE_NE mouseremote MOUSE_MEDIUM_NE + +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE +MOVE_NE mouseremote MOUSE_FAST_NE + +MOVE_E mouseremote MOUSE_SLOW_ENE +MOVE_NE mouseremote MOUSE_SLOW_ENE + +MOVE_E mouseremote MOUSE_MEDIUM_ENE +MOVE_NE mouseremote MOUSE_MEDIUM_ENE +MOVE_E mouseremote MOUSE_MEDIUM_ENE +MOVE_NE mouseremote MOUSE_MEDIUM_ENE + +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE +MOVE_E mouseremote MOUSE_FAST_ENE +MOVE_NE mouseremote MOUSE_FAST_ENE + +MOVE_E mouseremote MOUSE_SLOW_E +MOVE_E mouseremote MOUSE_SLOW_E + +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E +MOVE_E mouseremote MOUSE_MEDIUM_E + +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E +MOVE_E mouseremote MOUSE_FAST_E + +MOVE_E mouseremote MOUSE_SLOW_ESE +MOVE_SE mouseremote MOUSE_SLOW_ESE + +MOVE_E mouseremote MOUSE_MEDIUM_ESE +MOVE_SE mouseremote MOUSE_MEDIUM_ESE +MOVE_E mouseremote MOUSE_MEDIUM_ESE +MOVE_SE mouseremote MOUSE_MEDIUM_ESE + +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE +MOVE_E mouseremote MOUSE_FAST_ESE +MOVE_SE mouseremote MOUSE_FAST_ESE + +MOVE_SE mouseremote MOUSE_SLOW_SE +MOVE_SE mouseremote MOUSE_SLOW_SE + +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE +MOVE_SE mouseremote MOUSE_MEDIUM_SE + +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE +MOVE_SE mouseremote MOUSE_FAST_SE + +MOVE_S mouseremote MOUSE_SLOW_SSE +MOVE_SE mouseremote MOUSE_SLOW_SSE + +MOVE_S mouseremote MOUSE_MEDIUM_SSE +MOVE_SE mouseremote MOUSE_MEDIUM_SSE +MOVE_S mouseremote MOUSE_MEDIUM_SSE +MOVE_SE mouseremote MOUSE_MEDIUM_SSE + +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE +MOVE_S mouseremote MOUSE_FAST_SSE +MOVE_SE mouseremote MOUSE_FAST_SSE + +MOVE_S mouseremote MOUSE_SLOW_S +MOVE_S mouseremote MOUSE_SLOW_S + +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S +MOVE_S mouseremote MOUSE_MEDIUM_S + +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S +MOVE_S mouseremote MOUSE_FAST_S + +MOVE_S mouseremote MOUSE_SLOW_SSW +MOVE_SW mouseremote MOUSE_SLOW_SSW + +MOVE_S mouseremote MOUSE_MEDIUM_SSW +MOVE_SW mouseremote MOUSE_MEDIUM_SSW +MOVE_S mouseremote MOUSE_MEDIUM_SSW +MOVE_SW mouseremote MOUSE_MEDIUM_SSW + +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW +MOVE_S mouseremote MOUSE_FAST_SSW +MOVE_SW mouseremote MOUSE_FAST_SSW + +MOVE_SW mouseremote MOUSE_SLOW_SW +MOVE_SW mouseremote MOUSE_SLOW_SW + +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW +MOVE_SW mouseremote MOUSE_MEDIUM_SW + +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW +MOVE_SW mouseremote MOUSE_FAST_SW + +MOVE_W mouseremote MOUSE_SLOW_WSW +MOVE_SW mouseremote MOUSE_SLOW_WSW + +MOVE_W mouseremote MOUSE_MEDIUM_WSW +MOVE_SW mouseremote MOUSE_MEDIUM_WSW +MOVE_W mouseremote MOUSE_MEDIUM_WSW +MOVE_SW mouseremote MOUSE_MEDIUM_WSW + +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW +MOVE_W mouseremote MOUSE_FAST_WSW +MOVE_SW mouseremote MOUSE_FAST_WSW + +MOVE_W mouseremote MOUSE_SLOW_W +MOVE_W mouseremote MOUSE_SLOW_W + +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W +MOVE_W mouseremote MOUSE_MEDIUM_W + +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W +MOVE_W mouseremote MOUSE_FAST_W + +MOVE_W mouseremote MOUSE_SLOW_WNW +MOVE_NW mouseremote MOUSE_SLOW_WNW + +MOVE_W mouseremote MOUSE_MEDIUM_WNW +MOVE_NW mouseremote MOUSE_MEDIUM_WNW +MOVE_W mouseremote MOUSE_MEDIUM_WNW +MOVE_NW mouseremote MOUSE_MEDIUM_WNW + +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW +MOVE_W mouseremote MOUSE_FAST_WNW +MOVE_NW mouseremote MOUSE_FAST_WNW + +MOVE_NW mouseremote MOUSE_SLOW_NW +MOVE_NW mouseremote MOUSE_SLOW_NW + +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW +MOVE_NW mouseremote MOUSE_MEDIUM_NW + +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW +MOVE_NW mouseremote MOUSE_FAST_NW + +MOVE_N mouseremote MOUSE_SLOW_NNW +MOVE_NW mouseremote MOUSE_SLOW_NNW + +MOVE_N mouseremote MOUSE_MEDIUM_NNW +MOVE_NW mouseremote MOUSE_MEDIUM_NNW +MOVE_N mouseremote MOUSE_MEDIUM_NNW +MOVE_NW mouseremote MOUSE_MEDIUM_NNW + +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW +MOVE_N mouseremote MOUSE_FAST_NNW +MOVE_NW mouseremote MOUSE_FAST_NNW + +BUTTON1_DOWN mouseremote BUTTONL_DOWN +BUTTON2_DOWN mouseremote BUTTONR_DOWN + +BUTTON1_UP mouseremote BUTTON_UP +BUTTON2_UP mouseremote BUTTON_UP diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.home b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home new file mode 100755 index 0000000..b850a7d --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.home @@ -0,0 +1,10 @@ +[home] + path = /data/home/mythtv/ + public = yes + only guest = yes + writeable = yes + printable = no + force user = mythtv + force group = mythtv + create mask = 0755 + diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.media b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media new file mode 100755 index 0000000..6a4ec91 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.media @@ -0,0 +1,10 @@ +[media] + path = /data/media + public = yes + only guest = yes + writeable = yes + printable = no + force user = mythtv + force group = mythtv + create mask = 0755 + diff --git a/abs/core-testing/LinHES-config/templates/samba/smb.conf.template b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template new file mode 100644 index 0000000..42ddb99 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/samba/smb.conf.template @@ -0,0 +1,125 @@ +# +#======================= Global Settings ===================================== +[global] + + workgroup = home_lan + server string = MythVantage + +# Security mode. Defines in which mode Samba will operate. Possible +# values are share, user, server, domain and ads. Most people will want +# user level security. See the Samba-HOWTO-Collection for details. + security = share + +# This option is important for security. It allows you to restrict +# connections to machines which are on your local network. The +# following example restricts access to two C class networks and +# the "loopback" interface. For more examples of the syntax see +# the smb.conf man page +; hosts allow = 192.168.1. 192.168.2. 127. + + load printers = no + +# you may wish to override the location of the printcap file +; printcap name = /etc/printcap + +; guest account = pcguest + +# this tells Samba to use a separate log file for each machine +# that connects + log file = /var/log/samba/log.%m + +# Put a capping on the size of the log files (in Kb). + max log size = 50 + +# Use password server option only with security = server +# The argument list may include: +# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] +# or to auto-locate the domain controller/s +# password server = * +; password server = + +# Use the realm option only with security = ads +# Specifies the Active Directory realm the host is part of +; realm = MY_REALM + +# Backend to store user information in. New installations should +# use either tdbsam or ldapsam. smbpasswd is available for backwards +# compatibility. tdbsam requires no further configuration. +; passdb backend = tdbsam + +# Using the following line enables you to customise your configuration +# on a per machine basis. The %m gets replaced with the netbios name +# of the machine that is connecting. +# Note: Consider carefully the location in the configuration file of +# this line. The included file is read at that point. +; include = /usr/local/samba/lib/smb.conf.%m + +# Configure Samba to use multiple interfaces +# If you have multiple network interfaces then you must list them +# here. See the man page for details. +; interfaces = 192.168.12.2/24 192.168.13.2/24 + +# Browser Control Options: +# set local master to no if you don't want Samba to become a master +# browser on your network. Otherwise the normal election rules apply +; local master = no + +# OS Level determines the precedence of this server in master browser +# elections. The default value should be reasonable +; os level = 33 + +# Domain Master specifies Samba to be the Domain Master Browser. This +# allows Samba to collate browse lists between subnets. Don't use this +# if you already have a Windows NT domain controller doing this job +; domain master = yes + +# Preferred Master causes Samba to force a local browser election on startup +# and gives it a slightly higher chance of winning the election +; preferred master = yes + +# Enable this if you want Samba to be a domain logon server for +# Windows95 workstations. +; domain logons = yes + +# if you enable domain logons then you may want a per-machine or +# per user logon script +# run a specific logon batch file per workstation (machine) +; logon script = %m.bat +# run a specific logon batch file per username +; logon script = %U.bat + +# Where to store roving profiles (only for Win95 and WinNT) +# %L substitutes for this servers netbios name, %U is username +# You must uncomment the [Profiles] share below +; logon path = \\%L\Profiles\%U + +# Windows Internet Name Serving Support Section: +# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server +; wins support = yes + +# WINS Server - Tells the NMBD components of Samba to be a WINS Client +# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both +; wins server = w.x.y.z + +# WINS Proxy - Tells Samba to answer name resolution queries on +# behalf of a non WINS capable client, for this to work there must be +# at least one WINS Server on the network. The default is NO. +; wins proxy = yes + +# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names +# via DNS nslookups. The default is NO. + dns proxy = no + +# These scripts are used on a domain controller or stand-alone +# machine to add or delete corresponding unix accounts +; add user script = /usr/sbin/useradd %u +; add group script = /usr/sbin/groupadd %g +; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u +; delete user script = /usr/sbin/userdel %u +; delete user from group script = /usr/sbin/deluser %u %g +; delete group script = /usr/sbin/groupdel %g + + +#============================ Share Definitions ============================== + + diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt new file mode 100644 index 0000000..f82f2d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_1/keybindings.txt @@ -0,0 +1,209 @@ +context action description keylist hostname +Music FFWD Fast forward PgDown REPLACEME +Music STOP Stop playback O REPLACEME +Music MUTE Mute |,\\\\,F9 REPLACEME +Gallery SCROLLUP Scroll image up 2 REPLACEME +Music VOLUMEDOWN Volume down [,{,F10 REPLACEME +Music VOLUMEUP Volume up ],},F11 REPLACEME +qt DELETE Delete D REPLACEME +Music RWND Rewind PgUp REPLACEME +qt EDIT Edit E REPLACEME +Music PAUSE Pause/Start playback P REPLACEME +Gallery RECENTER Recenter image 5 REPLACEME +Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME +Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME +Gallery SCROLLRIGHT Scroll image right 6 REPLACEME +Gallery MENU Toggle activating menu in thumbnail view M REPLACEME +Gallery SCROLLDOWN Scroll image down 8 REPLACEME +Gallery ZOOMIN Zoom image in 9 REPLACEME +Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME +Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME +Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME +Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME +Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME +Gallery END Go to the last image in thumbnail view End REPLACEME +Gallery HOME Go to the first image in thumbnail view Home REPLACEME +Gallery SCROLLLEFT Scroll image left 4 REPLACEME +Gallery PLAY Start/Stop Slideshow P REPLACEME +NetFlix REMOVE Removes movie from queue D REPLACEME +Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME +Gallery ZOOMOUT Zoom image out 7 REPLACEME +NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME +Global DOWN Down Arrow Down REPLACEME +ITV Menu MENUTEXT Menu Text F7 REPLACEME +ITV Menu TEXTEXIT Menu Exit F6 REPLACEME +Global LEFT Left Arrow Left REPLACEME +Global RIGHT Right Arrow Right REPLACEME +Global UP Up Arrow Up REPLACEME +Global MENU Pop-up menu M REPLACEME +Global PREVVIEW Previous View Home REPLACEME +Global ESCAPE Escape Esc REPLACEME +Global PAGEUP Page Up PgUp REPLACEME +Global SELECT Select Return,Enter,Space REPLACEME +Global HELP Help F1 REPLACEME +Global INFO More information I REPLACEME +Global NEXTVIEW Next View End REPLACEME +ITV Menu MENUBLUE Menu Blue F5 REPLACEME +Global PAGEDOWN Page Down PgDown REPLACEME +Global EJECT Eject Removable Media REPLACEME +Global 3 3 3 REPLACEME +Global 1 1 1 REPLACEME +Global 6 6 6 REPLACEME +Global 0 0 0 REPLACEME +Global 2 2 2 REPLACEME +Global 4 4 4 REPLACEME +TV Frontend DELETE Delete Program D REPLACEME +Global 8 8 8 REPLACEME +Global 7 7 7 REPLACEME +TV Frontend PAGEDOWN Page Down 9 REPLACEME +TV Frontend PAGEUP Page Up 3 REPLACEME +Global 5 5 5 REPLACEME +TV Frontend CHANGERECGROUP Change Recording Group REPLACEME +Global 9 9 9 REPLACEME +Video END Go to the last video End REPLACEME +Video INCPARENT Increase Parental Level ],},F11 REPLACEME +Weather PAUSE Pause current page P REPLACEME +TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME +Video BROWSE Change browsable in video manager B REPLACEME +Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME +Video HOME Go to the first video Home REPLACEME +Video FILTER Open video filter dialog F REPLACEME +Welcome STARTXTERM Open an Xterm window F12 REPLACEME +Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music BLANKSCR Blank screen 5 REPLACEME +Video DELETE Delete video D REPLACEME +Music THMBUP Increase rating 9 REPLACEME +Music CYCLEVIS Cycle visualizer mode 6 REPLACEME +Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME +Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +TV Frontend PLAYBACK Play Program P REPLACEME +News FORCERETRIEVE Force update news items M REPLACEME +Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME +News RETRIEVENEWS Update news items I REPLACEME +News CANCEL Cancel news item updating C REPLACEME +Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME +Teletext Menu MENUWHITE Menu White F6 REPLACEME +ITV Menu MENURED Menu Red F2 REPLACEME +ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME +ITV Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME +Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME +Teletext Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME +Teletext Menu MENUBLUE Menu Blue F5 REPLACEME +Teletext Menu TOGGLETT Toggle Teletext T REPLACEME +Teletext Menu NEXTPAGE Next Page Down REPLACEME +TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME +TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME +TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME +TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME +Teletext Menu MENURED Menu Red F2 REPLACEME +TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME +Teletext Menu PREVPAGE Previous Page Up REPLACEME +TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME +TV Playback PLAY Play Ctrl+P REPLACEME +TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME +TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME +TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME +TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME +TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME +TV Playback FINDER Show the Program Finder # REPLACEME +TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME +TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME +TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME +TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME +TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME +TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME +TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME +TV Playback SPEEDINC Increase the playback speed U REPLACEME +TV Playback STRETCHDEC Decrease time stretch speed REPLACEME +TV Playback SPEEDDEC Decrease the playback speed J REPLACEME +TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME +TV Playback GUIDE Show the Program Guide S REPLACEME +TV Playback JUMPPREV Jump to previously played recording REPLACEME +TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME +TV Playback STRETCHINC Increase time stretch speed REPLACEME +TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME +TV Playback PREVCC708 Previous ATSC CC track REPLACEME +TV Playback NEXTCC708 Next ATSC CC track REPLACEME +TV Playback NEXTCC Next of any captions REPLACEME +TV Playback NEXTSCAN Next video scan overidemode REPLACEME +TV Playback NEXTCC608 Next VBI CC track REPLACEME +TV Playback PREVCC608 Previous VBI CC track REPLACEME +TV Playback PREVAUDIO Previous audio track - REPLACEME +TV Playback PREVSUBTITLE Previous subtitle track REPLACEME +TV Playback NEXTSUBTITLE Next subtitle track REPLACEME +TV Playback NEXTAUDIO Next audio track + REPLACEME +TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME +TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME +TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME +TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME +TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME +TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME +TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME +TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME +TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME +TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME +TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME +TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME +TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME +TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME +TV Playback SWAPPIP Swap PiP/Main N REPLACEME +TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME +TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME +TV Playback TOGGLECC608 Toggle VBI CC REPLACEME +TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME +TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME +TV Playback MUTE Mute |,\\\\,F9 REPLACEME +TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME +TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME +TV Playback VOLUMEUP Volume up ],},F11 REPLACEME +TV Playback TOGGLECC Toggle any captions T REPLACEME +TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME +TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME +TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME +TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME +TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME +TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME +TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME +TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME +TV Playback JUMPFFWD Jump ahead PgDown REPLACEME +TV Playback PREVCHAN Switch to the previous channel H REPLACEME +TV Playback JUMPBKMRK Jump to bookmark K REPLACEME +TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME +TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME +TV Playback JUMPRWND Jump back PgUp REPLACEME +TV Playback SEEKRWND Rewind Left REPLACEME +TV Playback SEEKFFWD Fast Forward Right REPLACEME +TV Playback CHANNELDOWN Channel down Down REPLACEME +TV Playback CHANNELUP Channel up Up REPLACEME +TV Playback ARBSEEK Arbitrary Seek * REPLACEME +TV Playback DELETE Delete Program D REPLACEME +TV Playback CLEAROSD Clear OSD Backspace REPLACEME +TV Frontend DETAILS Show program details U REPLACEME +TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME +TV Frontend UPCOMING List upcoming episodes O REPLACEME +TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME +TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME +TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME +TV Playback PAUSE Pause P REPLACEME +TV Frontend RANKINC Increase program or channel rank Right REPLACEME +TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME +TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME +TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME +Gallery DELETE Delete marked images or current image if none are marked D REPLACEME +TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME +Gallery MARK Mark image T REPLACEME +Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME +TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME +Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME +Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +Music DELETE Delete track from playlist D REPLACEME +Gallery INFO Toggle Showing Information about Image I REPLACEME +Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music REFRESH Refresh music tree 8 REPLACEME +Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME +Music FILTER Filter All My Music F REPLACEME +Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt new file mode 100644 index 0000000..8c3a391 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_1/settings.txt @@ -0,0 +1,320 @@ +value data hostname +AC3PassThru 0 REPLACEME +AggressiveSoundcardBuffer 0 REPLACEME +AllowQuitShutdown 3 REPLACEME +AltClearSavedPosition 1 REPLACEME +AspectOverride 0 REPLACEME +AudioNag 1 REPLACEME +AudioOutputDevice /dev/dsp REPLACEME +AutoCommercialSkip 2 REPLACEME +AutoLookupCD 1 REPLACEME +AutomaticSetWatched 0 REPLACEME +AutoPlayCD 0 REPLACEME +BackendServerPort 6543 REPLACEME +BackendStatusPort 6544 REPLACEME +CCBackground 0 REPLACEME +CDBlankType fast REPLACEME +CDCreateDir 1 REPLACEME +CDDevice /dev/cdrom REPLACEME +CDDiskSize 1 REPLACEME +CDWriterEnabled 0 REPLACEME +CDWriteSpeed 0 REPLACEME +ChannelFormat REPLACEME +ChannelOrdering channum REPLACEME +chanPerPage 5 REPLACEME +ClearSavedPosition 1 REPLACEME +CommNotifyAmount 0 REPLACEME +CommRewindAmount 0 REPLACEME +CustomFilters REPLACEME +DateFormat ddd MMM d REPLACEME +DecodeExtraAudio 1 REPLACEME +Default MythVideo View 1 REPLACEME +DefaultCCMode 0 REPLACEME +DefaultRipQuality 0 REPLACEME +DefaultTVChannel 3 REPLACEME +Deinterlace 1 REPLACEME +DeinterlaceFilter kerneldeint REPLACEME +DisplayGroupDefaultView 0 REPLACEME +DisplayGroupTitleSort 0 REPLACEME +DisplayRecGroup Default REPLACEME +DispRecGroupAsAllProg 0 REPLACEME +DTSPassThru 0 REPLACEME +DVDDeviceLocation /dev/dvd REPLACEME +DVDOnInsertDVD 1 REPLACEME +DVDRipLocation /data/media/tmp REPLACEME +EjectCDAfterRipping 1 REPLACEME +EnableMHEG 0 REPLACEME +EnableXbox 0 REPLACEME +EnableXbox 0 REPLACEME +EncoderType ogg REPLACEME +EndOfRecordingExitPrompt 1 REPLACEME +EPGFillType 10 REPLACEME +EPGScrollType 1 REPLACEME +EPGShowCategoryColors 1 REPLACEME +EPGShowCategoryText 1 REPLACEME +EPGShowChannelIcon 1 REPLACEME +EPGShowFavorites 0 REPLACEME +ExactSeeking 0 REPLACEME +FFRewReposTime 100 REPLACEME +FFRewReverse 1 REPLACEME +FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME +GalleryDir /data/media/images REPLACEME +GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME +GalleryMoviePlayerCmd mplayer -fs %s REPLACEME +GalleryOverlayCaption 0 REPLACEME +GalleryRecursiveSlideshow 1 REPLACEME +GallerySortOrder 20 REPLACEME +GalleryThumbnailLocation 1 REPLACEME +GameAllTreeLevels system gamename REPLACEME +GameFavTreeLevels gamename REPLACEME +GeneratePreviewPixmaps 0 REPLACEME +GuiHeight 0 REPLACEME +GuiOffsetX 0 REPLACEME +GuiOffsetY 0 REPLACEME +GuiSizeForTV 0 REPLACEME +GuiVidModeResolution 640x480 REPLACEME +GuiWidth 0 REPLACEME +HideMouseCursor 1 REPLACEME +HorizScanPercentage 0 REPLACEME +Ignore_ID3 0 REPLACEME +IndividualMuteControl 0 REPLACEME +IntelliLastPlayWeight 25 REPLACEME +IntelliPlayCountWeight 25 REPLACEME +IntelliRandomWeight 15 REPLACEME +IntelliRatingWeight 35 REPLACEME +ISO639Language0 eng REPLACEME +ISO639Language1 eng REPLACEME +JobAllowCommFlag 1 REPLACEME +JobAllowTranscode 1 REPLACEME +JobQueueCheckFrequency 60 REPLACEME +JobQueueCPU 0 REPLACEME +JobQueueMaxSimultaneousJobs 1 REPLACEME +JobQueueWindowEnd 23:59 REPLACEME +JobQueueWindowStart 00:00 REPLACEME +KeyboardAccelerators 1 REPLACEME +Language EN REPLACEME +LastMusicPlaylistPush 0 REPLACEME +LCDBacklightOn 1 REPLACEME +LCDBigClock 0 REPLACEME +LCDEnable 0 REPLACEME +LCDHeartBeatOn 0 REPLACEME +LCDKeyString ABCDEF REPLACEME +LCDPopupTime 5 REPLACEME +LCDShowChannel 1 REPLACEME +LCDShowGeneric 1 REPLACEME +LCDShowMenu 1 REPLACEME +LCDShowMusic 1 REPLACEME +LCDShowMusicItems ArtistTitle REPLACEME +LCDShowRecStatus 0 REPLACEME +LCDShowTime 1 REPLACEME +LCDShowVolume 1 REPLACEME +LircKeyPressedApp REPLACEME +ListAsShuffled 0 REPLACEME +LiveTVInAllPrograms 0 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanPeriod 14 REPLACEME +LogCleanPeriod 14 REPLACEME +LogMaxCount 100 REPLACEME +LogMaxCount 100 REPLACEME +LogPrintLevel 8 REPLACEME +LogPrintLevel 8 REPLACEME +LongChannelFormat REPLACEME +MasterMixerVolume 70 REPLACEME +MenuTheme MythVantage-menu REPLACEME +MixerControl PCM REPLACEME +MixerDevice /dev/mixer REPLACEME +MonitorDrives 0 REPLACEME +MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME +MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME +MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME +Mp3UseVBR 0 REPLACEME +MTDac3Flag 0 REPLACEME +MTDConcurrentTranscodes 1 REPLACEME +MTDLogFlag 0 REPLACEME +MTDNiceLevel 20 REPLACEME +MTDPort 2442 REPLACEME +MTDRipSize 0 REPLACEME +MTDxvidFlag 1 REPLACEME +MusicAudioDevice default REPLACEME +MusicLocation /data/media/audio REPLACEME +MusicShowRatings 0 REPLACEME +MythArchiveAlwaysUseMythTranscode 1 REPLACEME +MythArchiveChapterMenuAR Video REPLACEME +MythArchiveCopyRemoteFiles 1 REPLACEME +MythArchiveDateFormat %a %b %d REPLACEME +MythArchiveDvdauthorCmd dvdauthor REPLACEME +MythArchiveDVDLocation /dev/dvd REPLACEME +MythArchiveEncodeToAc3 1 REPLACEME +MythArchiveFfmpegCmd ffmpeg REPLACEME +MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME +MythArchiveGrowisofsCmd growisofs REPLACEME +MythArchiveMainMenuAR 16:9 REPLACEME +MythArchiveMkisofsCmd mkisofs REPLACEME +MythArchiveMpeg2encCmd mpeg2enc REPLACEME +MythArchiveMplexCmd mplex REPLACEME +MythArchivePng2yuvCmd png2yuv REPLACEME +MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME +MythArchiveSpumuxCmd spumux REPLACEME +MythArchiveTcrequantCmd tcrequant REPLACEME +MythArchiveTempDir /data/media/tmp REPLACEME +MythArchiveTimeFormat %I:%M %p REPLACEME +MythArchiveUseFIFO 1 REPLACEME +MythArchiveVideoFormat NTSC REPLACEME +MythControlsVolume 1 REPLACEME +mythdvd.DVDPlayerCommand Internal REPLACEME +mythvideo.db_folder_view 1 REPLACEME +mythvideo.ImageCacheSize 50 REPLACEME +mythvideo.sort_ignores_case 1 REPLACEME +NetworkControlEnabled 1 REPLACEME +NetworkControlPort 6546 REPLACEME +NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME +NoPromptOnExit 0 REPLACEME +NoWhitespace 0 REPLACEME +OnlyImportNewMusic 0 REPLACEME +OSDCC708CapitalsFont FreeMono.ttf REPLACEME +OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME +OSDCC708CasualFont FreeMono.ttf REPLACEME +OSDCC708CasualItalicFont FreeMono.ttf REPLACEME +OSDCC708CursiveFont FreeMono.ttf REPLACEME +OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME +OSDCC708DefaultFontType MonoSerif REPLACEME +OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708TextZoom 100 REPLACEME +OSDCCFont FreeMono.ttf REPLACEME +OSDFont FreeMono.ttf REPLACEME +OSDGeneralTimeout 2 REPLACEME +OSDNotifyTimeout 6 REPLACEME +OSDProgramInfoTimeout 3 REPLACEME +OSDTheme Gray-OSD REPLACEME +OSDThemeFontSizeType default REPLACEME +ParanoiaLevel Full REPLACEME +PassThruOutputDevice Default REPLACEME +PCMMixerVolume 70 REPLACEME +PersistentBrowseMode 1 REPLACEME +PIPLocation 0 REPLACEME +PlaybackBoxStartInTitle 1 REPLACEME +PlaybackExitPrompt 2 REPLACEME +PlaybackPreview 1 REPLACEME +PlaybackPreviewLowCPU 1 REPLACEME +PlayBoxEpisodeSort Date REPLACEME +PlayBoxOrdering 1 REPLACEME +PlayBoxShading 0 REPLACEME +PlayBoxTransparency 1 REPLACEME +PlayMode none REPLACEME +PostCDRipScript REPLACEME +PreferredMPEG2Decoder ffmpeg REPLACEME +PreviewFromBookmark 1 REPLACEME +PVR350EPGAlphaValue 164 REPLACEME +PVR350InternalAudioOnly 0 REPLACEME +PVR350OutputEnable 0 REPLACEME +PVR350VideoDev /dev/video16 REPLACEME +QtFontBig 25 REPLACEME +QtFontMedium 16 REPLACEME +QtFontSmall 12 REPLACEME +QueryInitialFilter 0 REPLACEME +RandomTheme 0 REPLACEME +RealtimePriority 1 REPLACEME +RecordFilePrefix /data/media/video/recordings REPLACEME +RememberRecGroup 1 REPLACEME +RepeatMode all REPLACEME +RunFrontendInWindow 0 REPLACEME +SelChangeRecThreshold 16 REPLACEME +SelectChangesChannel 1 REPLACEME +ServiceMythWEB 0 REPLACEME +ServiceNFS 0 REPLACEME +ServiceSamba 0 REPLACEME +SetupPinCodeRequired 0 REPLACEME +ShortDateFormat M/d REPLACEME +ShowGroupInfo 0 REPLACEME +ShowWholeTree 1 REPLACEME +SlideshowBackground REPLACEME +SlideshowDelay 5 REPLACEME +SlideshowOpenGLTransition none REPLACEME +SlideshowOpenGLTransitionLength 2000 REPLACEME +SlideshowTransition none REPLACEME +SmartChannelChange 0 REPLACEME +SmartForward 0 REPLACEME +StickyKeys 1 REPLACEME +Style Windows REPLACEME +SubTitleCommand -sid %s REPLACEME +TagSeparator - REPLACEME +Theme basic-blue REPLACEME +ThemeFontSizeType default REPLACEME +ThemePainter qt REPLACEME +TimeFormat h:mm AP REPLACEME +timePerPage 4 REPLACEME +TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME +TranscodeCommand transcode REPLACEME +TreeLevels splitartist artist album title REPLACEME +TVVidModeForceAspect 0.0 REPLACEME +TVVidModeForceAspect0 0.0 REPLACEME +TVVidModeForceAspect1 0.0 REPLACEME +TVVidModeForceAspect2 0.0 REPLACEME +TVVidModeRefreshRate 0 REPLACEME +TVVidModeRefreshRate0 0 REPLACEME +TVVidModeRefreshRate1 0 REPLACEME +TVVidModeRefreshRate2 0 REPLACEME +TVVidModeResolution 640x480 REPLACEME +TVVidModeResolution0 640x480 REPLACEME +TVVidModeResolution1 640x480 REPLACEME +TVVidModeResolution2 640x480 REPLACEME +UDPNotifyPort 6948 REPLACEME +UnknownCategory Unknown REPLACEME +UnknownTitle Unknown REPLACEME +upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME +UseArrowAccels 1 REPLACEME +UseOutputPictureControls 1 REPLACEME +UseVideoModes 0 REPLACEME +UseVideoTimebase 0 REPLACEME +UseVirtualKeyboard 1 REPLACEME +VCDDeviceLocation /dev/cdrom REPLACEME +VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME +VertScanPercentage 0 REPLACEME +VideoAggressivePC 0 REPLACEME +VideoArtworkDir /data/media/images/posters REPLACEME +VideoBrowserNoDB 0 REPLACEME +VideoDefaultParentalLevel 4 REPLACEME +VideoGalleryAspectRatio 1 REPLACEME +VideoGalleryColsPerPage 4 REPLACEME +VideoGalleryNoDB 0 REPLACEME +VideoGalleryRowsPerPage 3 REPLACEME +VideoGallerySubtitle 1 REPLACEME +VideoListUnknownFiletypes 1 REPLACEME +VideoNewBrowsable 1 REPLACEME +VideoDefaultPlayer Internal REPLACEME +VideoStartupDir /data/media/video/movies REPLACEME +VideoTreeLoadMetaData 1 REPLACEME +VideoTreeNoDB 0 REPLACEME +VidModeHeight0 0 REPLACEME +VidModeHeight1 0 REPLACEME +VidModeHeight2 0 REPLACEME +VidModeWidth0 0 REPLACEME +VidModeWidth1 0 REPLACEME +VidModeWidth2 0 REPLACEME +VisualCycleOnSongChange 0 REPLACEME +VisualMode Random REPLACEME +VisualModeDelay 0 REPLACEME +VisualScaleHeight 1 REPLACEME +VisualScaleWidth 1 REPLACEME +WatchTVGuide 0 REPLACEME +WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME +WebBrowserHideScrollbars 0 REPLACEME +WebBrowserScrollMode 1 REPLACEME +WebBrowserScrollSpeed 4 REPLACEME +WebBrowserZoomLevel 20 REPLACEME +XScanDisplacement 0 REPLACEME +YScanDisplacement 0 REPLACEME +HaltCommand sudo /sbin/poweroff REPLACEME +RebootCommand sudo /sbin/reboot REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt new file mode 100644 index 0000000..f82f2d2 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_2/keybindings.txt @@ -0,0 +1,209 @@ +context action description keylist hostname +Music FFWD Fast forward PgDown REPLACEME +Music STOP Stop playback O REPLACEME +Music MUTE Mute |,\\\\,F9 REPLACEME +Gallery SCROLLUP Scroll image up 2 REPLACEME +Music VOLUMEDOWN Volume down [,{,F10 REPLACEME +Music VOLUMEUP Volume up ],},F11 REPLACEME +qt DELETE Delete D REPLACEME +Music RWND Rewind PgUp REPLACEME +qt EDIT Edit E REPLACEME +Music PAUSE Pause/Start playback P REPLACEME +Gallery RECENTER Recenter image 5 REPLACEME +Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME +Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME +Gallery SCROLLRIGHT Scroll image right 6 REPLACEME +Gallery MENU Toggle activating menu in thumbnail view M REPLACEME +Gallery SCROLLDOWN Scroll image down 8 REPLACEME +Gallery ZOOMIN Zoom image in 9 REPLACEME +Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME +Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME +Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME +Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME +Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME +Gallery END Go to the last image in thumbnail view End REPLACEME +Gallery HOME Go to the first image in thumbnail view Home REPLACEME +Gallery SCROLLLEFT Scroll image left 4 REPLACEME +Gallery PLAY Start/Stop Slideshow P REPLACEME +NetFlix REMOVE Removes movie from queue D REPLACEME +Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME +Gallery ZOOMOUT Zoom image out 7 REPLACEME +NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME +Global DOWN Down Arrow Down REPLACEME +ITV Menu MENUTEXT Menu Text F7 REPLACEME +ITV Menu TEXTEXIT Menu Exit F6 REPLACEME +Global LEFT Left Arrow Left REPLACEME +Global RIGHT Right Arrow Right REPLACEME +Global UP Up Arrow Up REPLACEME +Global MENU Pop-up menu M REPLACEME +Global PREVVIEW Previous View Home REPLACEME +Global ESCAPE Escape Esc REPLACEME +Global PAGEUP Page Up PgUp REPLACEME +Global SELECT Select Return,Enter,Space REPLACEME +Global HELP Help F1 REPLACEME +Global INFO More information I REPLACEME +Global NEXTVIEW Next View End REPLACEME +ITV Menu MENUBLUE Menu Blue F5 REPLACEME +Global PAGEDOWN Page Down PgDown REPLACEME +Global EJECT Eject Removable Media REPLACEME +Global 3 3 3 REPLACEME +Global 1 1 1 REPLACEME +Global 6 6 6 REPLACEME +Global 0 0 0 REPLACEME +Global 2 2 2 REPLACEME +Global 4 4 4 REPLACEME +TV Frontend DELETE Delete Program D REPLACEME +Global 8 8 8 REPLACEME +Global 7 7 7 REPLACEME +TV Frontend PAGEDOWN Page Down 9 REPLACEME +TV Frontend PAGEUP Page Up 3 REPLACEME +Global 5 5 5 REPLACEME +TV Frontend CHANGERECGROUP Change Recording Group REPLACEME +Global 9 9 9 REPLACEME +Video END Go to the last video End REPLACEME +Video INCPARENT Increase Parental Level ],},F11 REPLACEME +Weather PAUSE Pause current page P REPLACEME +TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME +Video BROWSE Change browsable in video manager B REPLACEME +Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME +Video HOME Go to the first video Home REPLACEME +Video FILTER Open video filter dialog F REPLACEME +Welcome STARTXTERM Open an Xterm window F12 REPLACEME +Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music BLANKSCR Blank screen 5 REPLACEME +Video DELETE Delete video D REPLACEME +Music THMBUP Increase rating 9 REPLACEME +Music CYCLEVIS Cycle visualizer mode 6 REPLACEME +Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME +Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +TV Frontend PLAYBACK Play Program P REPLACEME +News FORCERETRIEVE Force update news items M REPLACEME +Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME +News RETRIEVENEWS Update news items I REPLACEME +News CANCEL Cancel news item updating C REPLACEME +Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME +Teletext Menu MENUWHITE Menu White F6 REPLACEME +ITV Menu MENURED Menu Red F2 REPLACEME +ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME +ITV Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME +Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME +Teletext Menu MENUGREEN Menu Green F3 REPLACEME +Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME +Teletext Menu MENUBLUE Menu Blue F5 REPLACEME +Teletext Menu TOGGLETT Toggle Teletext T REPLACEME +Teletext Menu NEXTPAGE Next Page Down REPLACEME +TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME +TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME +TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME +TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME +Teletext Menu MENURED Menu Red F2 REPLACEME +TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME +Teletext Menu PREVPAGE Previous Page Up REPLACEME +TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME +TV Playback PLAY Play Ctrl+P REPLACEME +TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME +TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME +TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME +TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME +TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME +TV Playback FINDER Show the Program Finder # REPLACEME +TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME +TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME +TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME +TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME +TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME +TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME +TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME +TV Playback SPEEDINC Increase the playback speed U REPLACEME +TV Playback STRETCHDEC Decrease time stretch speed REPLACEME +TV Playback SPEEDDEC Decrease the playback speed J REPLACEME +TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME +TV Playback GUIDE Show the Program Guide S REPLACEME +TV Playback JUMPPREV Jump to previously played recording REPLACEME +TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME +TV Playback STRETCHINC Increase time stretch speed REPLACEME +TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME +TV Playback PREVCC708 Previous ATSC CC track REPLACEME +TV Playback NEXTCC708 Next ATSC CC track REPLACEME +TV Playback NEXTCC Next of any captions REPLACEME +TV Playback NEXTSCAN Next video scan overidemode REPLACEME +TV Playback NEXTCC608 Next VBI CC track REPLACEME +TV Playback PREVCC608 Previous VBI CC track REPLACEME +TV Playback PREVAUDIO Previous audio track - REPLACEME +TV Playback PREVSUBTITLE Previous subtitle track REPLACEME +TV Playback NEXTSUBTITLE Next subtitle track REPLACEME +TV Playback NEXTAUDIO Next audio track + REPLACEME +TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME +TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME +TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME +TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME +TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME +TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME +TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME +TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME +TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME +TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME +TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME +TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME +TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME +TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME +TV Playback SWAPPIP Swap PiP/Main N REPLACEME +TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME +TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME +TV Playback TOGGLECC608 Toggle VBI CC REPLACEME +TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME +TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME +TV Playback MUTE Mute |,\\\\,F9 REPLACEME +TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME +TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME +TV Playback VOLUMEUP Volume up ],},F11 REPLACEME +TV Playback TOGGLECC Toggle any captions T REPLACEME +TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME +TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME +TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME +TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME +TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME +TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME +TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME +TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME +TV Playback JUMPFFWD Jump ahead PgDown REPLACEME +TV Playback PREVCHAN Switch to the previous channel H REPLACEME +TV Playback JUMPBKMRK Jump to bookmark K REPLACEME +TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME +TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME +TV Playback JUMPRWND Jump back PgUp REPLACEME +TV Playback SEEKRWND Rewind Left REPLACEME +TV Playback SEEKFFWD Fast Forward Right REPLACEME +TV Playback CHANNELDOWN Channel down Down REPLACEME +TV Playback CHANNELUP Channel up Up REPLACEME +TV Playback ARBSEEK Arbitrary Seek * REPLACEME +TV Playback DELETE Delete Program D REPLACEME +TV Playback CLEAROSD Clear OSD Backspace REPLACEME +TV Frontend DETAILS Show program details U REPLACEME +TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME +TV Frontend UPCOMING List upcoming episodes O REPLACEME +TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME +TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME +TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME +TV Playback PAUSE Pause P REPLACEME +TV Frontend RANKINC Increase program or channel rank Right REPLACEME +TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME +TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME +TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME +Gallery DELETE Delete marked images or current image if none are marked D REPLACEME +TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME +Gallery MARK Mark image T REPLACEME +Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME +TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME +TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME +Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME +Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME +Music DELETE Delete track from playlist D REPLACEME +Gallery INFO Toggle Showing Information about Image I REPLACEME +Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME +Music REFRESH Refresh music tree 8 REPLACEME +Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME +Music FILTER Filter All My Music F REPLACEME +Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt new file mode 100644 index 0000000..106be04 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/settings/default_2/settings.txt @@ -0,0 +1,320 @@ +value data hostname +AC3PassThru 0 REPLACEME +AggressiveSoundcardBuffer 0 REPLACEME +AllowQuitShutdown 3 REPLACEME +AltClearSavedPosition 1 REPLACEME +AspectOverride 0 REPLACEME +AudioNag 1 REPLACEME +AudioOutputDevice /dev/dsp REPLACEME +AutoCommercialSkip 2 REPLACEME +AutoLookupCD 1 REPLACEME +AutomaticSetWatched 0 REPLACEME +AutoPlayCD 0 REPLACEME +BackendServerPort 6543 REPLACEME +BackendStatusPort 6544 REPLACEME +CCBackground 0 REPLACEME +CDBlankType fast REPLACEME +CDCreateDir 1 REPLACEME +CDDevice /dev/cdrom REPLACEME +CDDiskSize 1 REPLACEME +CDWriterEnabled 0 REPLACEME +CDWriteSpeed 0 REPLACEME +ChannelFormat REPLACEME +ChannelOrdering channum REPLACEME +chanPerPage 5 REPLACEME +ClearSavedPosition 1 REPLACEME +CommNotifyAmount 0 REPLACEME +CommRewindAmount 0 REPLACEME +CustomFilters REPLACEME +DateFormat ddd MMM d REPLACEME +DecodeExtraAudio 1 REPLACEME +Default MythVideo View 1 REPLACEME +DefaultCCMode 0 REPLACEME +DefaultRipQuality 0 REPLACEME +DefaultTVChannel 3 REPLACEME +Deinterlace 1 REPLACEME +DeinterlaceFilter kerneldeint REPLACEME +DisplayGroupDefaultView 0 REPLACEME +DisplayGroupTitleSort 0 REPLACEME +DisplayRecGroup Default REPLACEME +DispRecGroupAsAllProg 0 REPLACEME +DTSPassThru 0 REPLACEME +DVDDeviceLocation /dev/dvd REPLACEME +DVDOnInsertDVD 1 REPLACEME +DVDRipLocation /data/media/tmp REPLACEME +EjectCDAfterRipping 1 REPLACEME +EnableMHEG 0 REPLACEME +EnableXbox 0 REPLACEME +EnableXbox 0 REPLACEME +EncoderType ogg REPLACEME +EndOfRecordingExitPrompt 1 REPLACEME +EPGFillType 10 REPLACEME +EPGScrollType 1 REPLACEME +EPGShowCategoryColors 1 REPLACEME +EPGShowCategoryText 1 REPLACEME +EPGShowChannelIcon 1 REPLACEME +EPGShowFavorites 0 REPLACEME +ExactSeeking 0 REPLACEME +FFRewReposTime 100 REPLACEME +FFRewReverse 1 REPLACEME +FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME +GalleryDir /data/media/images REPLACEME +GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME +GalleryMoviePlayerCmd mplayer -fs %s REPLACEME +GalleryOverlayCaption 0 REPLACEME +GalleryRecursiveSlideshow 1 REPLACEME +GallerySortOrder 20 REPLACEME +GalleryThumbnailLocation 1 REPLACEME +GameAllTreeLevels system gamename REPLACEME +GameFavTreeLevels gamename REPLACEME +GeneratePreviewPixmaps 0 REPLACEME +GuiHeight 0 REPLACEME +GuiOffsetX 0 REPLACEME +GuiOffsetY 0 REPLACEME +GuiSizeForTV 0 REPLACEME +GuiVidModeResolution 640x480 REPLACEME +GuiWidth 0 REPLACEME +HaltCommand halt REPLACEME +HideMouseCursor 1 REPLACEME +HorizScanPercentage 0 REPLACEME +Ignore_ID3 0 REPLACEME +IndividualMuteControl 0 REPLACEME +IntelliLastPlayWeight 25 REPLACEME +IntelliPlayCountWeight 25 REPLACEME +IntelliRandomWeight 15 REPLACEME +IntelliRatingWeight 35 REPLACEME +ISO639Language0 eng REPLACEME +ISO639Language1 eng REPLACEME +JobAllowCommFlag 1 REPLACEME +JobAllowTranscode 1 REPLACEME +JobQueueCheckFrequency 60 REPLACEME +JobQueueCPU 0 REPLACEME +JobQueueMaxSimultaneousJobs 1 REPLACEME +JobQueueWindowEnd 23:59 REPLACEME +JobQueueWindowStart 00:00 REPLACEME +KeyboardAccelerators 1 REPLACEME +Language EN REPLACEME +LastMusicPlaylistPush 0 REPLACEME +LCDBacklightOn 1 REPLACEME +LCDBigClock 0 REPLACEME +LCDEnable 0 REPLACEME +LCDHeartBeatOn 0 REPLACEME +LCDKeyString ABCDEF REPLACEME +LCDPopupTime 5 REPLACEME +LCDShowChannel 1 REPLACEME +LCDShowGeneric 1 REPLACEME +LCDShowMenu 1 REPLACEME +LCDShowMusic 1 REPLACEME +LCDShowMusicItems ArtistTitle REPLACEME +LCDShowRecStatus 0 REPLACEME +LCDShowTime 1 REPLACEME +LCDShowVolume 1 REPLACEME +LircKeyPressedApp REPLACEME +ListAsShuffled 0 REPLACEME +LiveTVInAllPrograms 0 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanDays 14 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanEnabled 0 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanMax 30 REPLACEME +LogCleanPeriod 14 REPLACEME +LogCleanPeriod 14 REPLACEME +LogMaxCount 100 REPLACEME +LogMaxCount 100 REPLACEME +LogPrintLevel 8 REPLACEME +LogPrintLevel 8 REPLACEME +LongChannelFormat REPLACEME +MasterMixerVolume 70 REPLACEME +MenuTheme STB-menu REPLACEME +MixerControl PCM REPLACEME +MixerDevice /dev/mixer REPLACEME +MonitorDrives 0 REPLACEME +MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME +MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME +MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME +Mp3UseVBR 0 REPLACEME +MTDac3Flag 0 REPLACEME +MTDConcurrentTranscodes 1 REPLACEME +MTDLogFlag 0 REPLACEME +MTDNiceLevel 20 REPLACEME +MTDPort 2442 REPLACEME +MTDRipSize 0 REPLACEME +MTDxvidFlag 1 REPLACEME +MusicAudioDevice default REPLACEME +MusicLocation /data/media/audio REPLACEME +MusicShowRatings 0 REPLACEME +MythArchiveAlwaysUseMythTranscode 1 REPLACEME +MythArchiveChapterMenuAR Video REPLACEME +MythArchiveCopyRemoteFiles 1 REPLACEME +MythArchiveDateFormat %a %b %d REPLACEME +MythArchiveDvdauthorCmd dvdauthor REPLACEME +MythArchiveDVDLocation /dev/dvd REPLACEME +MythArchiveEncodeToAc3 1 REPLACEME +MythArchiveFfmpegCmd ffmpeg REPLACEME +MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME +MythArchiveGrowisofsCmd growisofs REPLACEME +MythArchiveMainMenuAR 16:9 REPLACEME +MythArchiveMkisofsCmd mkisofs REPLACEME +MythArchiveMpeg2encCmd mpeg2enc REPLACEME +MythArchiveMplexCmd mplex REPLACEME +MythArchivePng2yuvCmd png2yuv REPLACEME +MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME +MythArchiveSpumuxCmd spumux REPLACEME +MythArchiveTcrequantCmd tcrequant REPLACEME +MythArchiveTempDir /data/media/tmp REPLACEME +MythArchiveTimeFormat %I:%M %p REPLACEME +MythArchiveUseFIFO 1 REPLACEME +MythArchiveVideoFormat NTSC REPLACEME +MythControlsVolume 1 REPLACEME +mythdvd.DVDPlayerCommand Internal REPLACEME +mythvideo.db_folder_view 1 REPLACEME +mythvideo.ImageCacheSize 50 REPLACEME +mythvideo.sort_ignores_case 1 REPLACEME +NetworkControlEnabled 1 REPLACEME +NetworkControlPort 6546 REPLACEME +NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME +NoPromptOnExit 0 REPLACEME +NoWhitespace 0 REPLACEME +OnlyImportNewMusic 0 REPLACEME +OSDCC708CapitalsFont FreeMono.ttf REPLACEME +OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME +OSDCC708CasualFont FreeMono.ttf REPLACEME +OSDCC708CasualItalicFont FreeMono.ttf REPLACEME +OSDCC708CursiveFont FreeMono.ttf REPLACEME +OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME +OSDCC708DefaultFontType MonoSerif REPLACEME +OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifFont FreeMono.ttf REPLACEME +OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708PropSerifFont FreeMono.ttf REPLACEME +OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME +OSDCC708TextZoom 100 REPLACEME +OSDCCFont FreeMono.ttf REPLACEME +OSDFont FreeMono.ttf REPLACEME +OSDGeneralTimeout 2 REPLACEME +OSDNotifyTimeout 6 REPLACEME +OSDProgramInfoTimeout 3 REPLACEME +OSDTheme Gray-OSD REPLACEME +OSDThemeFontSizeType default REPLACEME +ParanoiaLevel Full REPLACEME +PassThruOutputDevice Default REPLACEME +PCMMixerVolume 70 REPLACEME +PersistentBrowseMode 1 REPLACEME +PIPLocation 0 REPLACEME +PlaybackBoxStartInTitle 1 REPLACEME +PlaybackExitPrompt 2 REPLACEME +PlaybackPreview 1 REPLACEME +PlaybackPreviewLowCPU 1 REPLACEME +PlayBoxEpisodeSort Date REPLACEME +PlayBoxOrdering 1 REPLACEME +PlayBoxShading 0 REPLACEME +PlayBoxTransparency 1 REPLACEME +PlayMode none REPLACEME +PostCDRipScript REPLACEME +PreferredMPEG2Decoder ffmpeg REPLACEME +PreviewFromBookmark 1 REPLACEME +PVR350EPGAlphaValue 164 REPLACEME +PVR350InternalAudioOnly 0 REPLACEME +PVR350OutputEnable 0 REPLACEME +PVR350VideoDev /dev/video16 REPLACEME +QtFontBig 25 REPLACEME +QtFontMedium 16 REPLACEME +QtFontSmall 12 REPLACEME +QueryInitialFilter 0 REPLACEME +RandomTheme 0 REPLACEME +RealtimePriority 1 REPLACEME +RecordFilePrefix /data/media/video/recordings REPLACEME +RememberRecGroup 1 REPLACEME +RepeatMode all REPLACEME +RunFrontendInWindow 0 REPLACEME +SelChangeRecThreshold 16 REPLACEME +SelectChangesChannel 1 REPLACEME +ServiceMythWEB 0 REPLACEME +ServiceNFS 0 REPLACEME +ServiceSamba 0 REPLACEME +SetupPinCodeRequired 0 REPLACEME +ShortDateFormat M/d REPLACEME +ShowGroupInfo 0 REPLACEME +ShowWholeTree 1 REPLACEME +SlideshowBackground REPLACEME +SlideshowDelay 5 REPLACEME +SlideshowOpenGLTransition none REPLACEME +SlideshowOpenGLTransitionLength 2000 REPLACEME +SlideshowTransition none REPLACEME +SmartChannelChange 0 REPLACEME +SmartForward 0 REPLACEME +StickyKeys 1 REPLACEME +Style REPLACEME +SubTitleCommand -sid %s REPLACEME +TagSeparator - REPLACEME +Theme basic-blue REPLACEME +ThemeFontSizeType default REPLACEME +ThemePainter qt REPLACEME +TimeFormat h:mm AP REPLACEME +timePerPage 4 REPLACEME +TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME +TranscodeCommand transcode REPLACEME +TreeLevels splitartist artist album title REPLACEME +TVVidModeForceAspect 0.0 REPLACEME +TVVidModeForceAspect0 0.0 REPLACEME +TVVidModeForceAspect1 0.0 REPLACEME +TVVidModeForceAspect2 0.0 REPLACEME +TVVidModeRefreshRate 0 REPLACEME +TVVidModeRefreshRate0 0 REPLACEME +TVVidModeRefreshRate1 0 REPLACEME +TVVidModeRefreshRate2 0 REPLACEME +TVVidModeResolution 640x480 REPLACEME +TVVidModeResolution0 640x480 REPLACEME +TVVidModeResolution1 640x480 REPLACEME +TVVidModeResolution2 640x480 REPLACEME +UDPNotifyPort 6948 REPLACEME +UnknownCategory Unknown REPLACEME +UnknownTitle Unknown REPLACEME +upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME +UseArrowAccels 1 REPLACEME +UseDHCP 1 REPLACEME +UseOutputPictureControls 1 REPLACEME +UseVideoModes 0 REPLACEME +UseVideoTimebase 0 REPLACEME +UseVirtualKeyboard 1 REPLACEME +VCDDeviceLocation /dev/cdrom REPLACEME +VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME +VertScanPercentage 0 REPLACEME +VideoAggressivePC 0 REPLACEME +VideoArtworkDir /data/media/images/posters REPLACEME +VideoBrowserNoDB 0 REPLACEME +VideoDefaultParentalLevel 4 REPLACEME +VideoGalleryAspectRatio 1 REPLACEME +VideoGalleryColsPerPage 4 REPLACEME +VideoGalleryNoDB 0 REPLACEME +VideoGalleryRowsPerPage 3 REPLACEME +VideoGallerySubtitle 1 REPLACEME +VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME +VideoListUnknownFiletypes 1 REPLACEME +VideoNewBrowsable 1 REPLACEME +VideoStartupDir /data/media/video/movies REPLACEME +VideoTreeLoadMetaData 1 REPLACEME +VideoTreeNoDB 0 REPLACEME +VidModeHeight0 0 REPLACEME +VidModeHeight1 0 REPLACEME +VidModeHeight2 0 REPLACEME +VidModeWidth0 0 REPLACEME +VidModeWidth1 0 REPLACEME +VidModeWidth2 0 REPLACEME +VisualCycleOnSongChange 0 REPLACEME +VisualMode Random REPLACEME +VisualModeDelay 0 REPLACEME +VisualScaleHeight 1 REPLACEME +VisualScaleWidth 1 REPLACEME +WatchTVGuide 0 REPLACEME +WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME +WebBrowserHideScrollbars 0 REPLACEME +WebBrowserScrollMode 1 REPLACEME +WebBrowserScrollSpeed 4 REPLACEME +WebBrowserZoomLevel 20 REPLACEME +XScanDisplacement 0 REPLACEME +YScanDisplacement 0 REPLACEME diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core b/abs/core-testing/LinHES-config/templates/sources/mv-core new file mode 100644 index 0000000..f9f6c97 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-core @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-core diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-core-testing b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing new file mode 100644 index 0000000..1fce6ea --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-core-testing @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-core-testing diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra b/abs/core-testing/LinHES-config/templates/sources/mv-extra new file mode 100644 index 0000000..e13640f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra @@ -0,0 +1,2 @@ +#Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-extra diff --git a/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing new file mode 100644 index 0000000..c176add --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/mv-extra-testing @@ -0,0 +1,2 @@ +##Begin official list of mirrors +Server = http://www.mythvantage.com/repo/mv-extra-testing diff --git a/abs/core-testing/LinHES-config/templates/sources/svc_pkg b/abs/core-testing/LinHES-config/templates/sources/svc_pkg new file mode 100644 index 0000000..c1efdcc --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/sources/svc_pkg @@ -0,0 +1,3 @@ +[svc_pkg] +Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686 + diff --git a/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf new file mode 100755 index 0000000..51db997 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/transmit/Time_Warner_SA3250/lircd.conf @@ -0,0 +1,413 @@ +# + +begin remote + + name Time_Warner_SA3250 + flags CONST_LENGTH|RAW_CODES + eps 30 + aeps 100 + + ptrail 0 + repeat 0 0 + gap 100240 + frequency 57600 + + begin raw_codes + + name MUTE + 972 802 971 802 1887 778 + 971 798 971 798 972 798 + 971 798 972 798 971 1677 + 972 802 1887 1656 992 + + name POWER + 3450 3229 894 2468 891 2468 + 893 778 892 2468 891 2469 + 917 2444 891 2468 892 2469 + 891 779 892 778 918 752 + 917 754 917 752 892 2471 + 889 779 892 779 892 777 + 892 779 892 777 868 2492 + 892 2469 891 2470 890 + + name GUIDE + 3397 3285 890 2470 840 2519 + 916 755 891 2470 839 2520 + 891 780 891 2474 860 2495 + 892 778 917 754 890 780 + 891 781 864 804 917 2443 + 865 805 891 779 866 2495 + 864 805 892 779 891 2469 + 865 2495 891 2469 866 + + + name INFO + 3449 3231 918 2441 920 2440 + 920 750 947 2414 920 2440 + 920 750 894 777 919 750 + 947 2413 921 750 919 750 + 920 751 919 752 918 2441 + 921 749 895 776 919 2441 + 920 2440 920 2441 920 749 + 921 2439 921 2440 921 + + name UP + 3396 3285 915 2444 919 2442 + 918 752 916 2444 919 2441 + 919 751 916 2445 919 751 + 890 780 916 753 917 754 + 942 729 889 780 916 2445 + 919 751 915 756 914 2448 + 916 752 916 2444 918 2442 + 919 2441 918 2443 918 + + name DOWN + 3421 3261 890 2470 918 2442 + 919 751 916 2446 917 2441 + 919 2442 918 2442 918 752 + 916 2444 919 751 890 780 + 916 755 915 755 915 2445 + 919 753 914 755 889 781 + 889 781 916 2444 919 752 + 889 2471 919 2441 918 + + name LEFT + 3427 3255 918 2441 924 2437 + 920 750 918 2442 920 2441 + 919 2440 921 2439 921 750 + 919 751 944 726 919 752 + 917 753 918 751 944 2417 + 920 750 893 777 919 751 + 919 752 918 2441 921 2440 + 920 2440 920 2440 921 + + name RIGHT + 3424 3258 892 2466 921 2439 + 896 774 920 2441 920 2440 + 920 750 920 751 945 2414 + 921 750 919 751 920 750 + 919 752 919 751 919 2440 + 921 750 918 752 918 2442 + 920 2440 921 749 918 2443 + 920 2440 920 2441 919 + + name SELECT + 3424 3257 944 2416 919 2442 + 919 750 918 2442 920 2441 + 919 751 943 727 918 2442 + 920 2440 920 752 916 752 + 969 702 917 753 892 2468 + 919 751 892 778 918 2442 + 924 2436 921 750 917 753 + 918 2443 919 2441 919 + + name SETTINGS + 3402 3278 871 2491 921 2438 + 921 749 922 2440 919 2441 + 919 2440 921 749 921 750 + 895 2465 920 2440 921 2440 + 920 749 896 775 921 2439 + 920 749 923 748 895 775 + 922 2439 920 2440 920 749 + 897 774 896 774 921 + + name EXIT + 3400 3279 896 2464 921 2439 + 921 750 895 2465 921 2439 + 921 749 898 772 896 2465 + 920 2440 920 750 920 2441 + 920 749 896 774 870 2491 + 921 749 921 749 895 2465 + 921 2440 920 749 922 748 + 897 2464 920 750 896 + + name PGUP + 3425 3255 920 2440 920 2440 + 921 749 895 2466 920 2440 + 920 749 920 2441 896 2464 + 921 749 919 2445 917 2440 + 920 750 920 750 920 2441 + 921 748 921 749 920 2440 + 921 750 919 752 919 2440 + 921 749 921 750 919 + + name PGDN + 3400 3281 921 2438 921 2441 + 920 749 895 2465 896 2465 + 920 2440 920 2440 920 2440 + 921 749 896 2465 895 2465 + 920 750 895 775 920 2440 + 921 749 921 750 895 775 + 896 774 896 774 921 2439 + 921 749 921 751 894 + + name VOLUP + 995 778 1886 779 994 775 + 995 777 993 774 996 774 + 995 775 995 1654 1885 778 + 995 775 995 774 995 + + name VOLDN + 996 778 971 802 1862 803 + 970 799 996 774 995 774 + 996 774 995 1654 1886 778 + 996 773 971 1678 991 + + name CHUP + 3421 3259 916 2444 918 2443 + 918 751 917 2444 919 2441 + 919 2441 919 751 916 2444 + 919 2441 919 2443 918 751 + 941 729 916 755 917 2442 + 919 752 916 754 891 778 + 918 2444 918 751 916 754 + 917 753 916 2445 919 + + name CHDN + 3421 3260 915 2445 918 2442 + 919 751 891 2469 919 2441 + 927 745 915 2444 919 2441 + 919 2441 919 2442 918 752 + 915 755 890 780 917 2443 + 919 752 916 754 915 2445 + 919 751 915 755 890 781 + 914 756 916 2445 917 + + name A + 3425 3258 916 2442 920 2441 + 919 751 918 2442 919 2441 + 920 2440 920 2441 919 2441 + 919 2441 920 750 917 2443 + 920 751 917 752 919 2442 + 920 750 918 753 917 753 + 917 753 942 728 917 753 + 918 2442 920 750 942 + + name B + 3398 3283 916 2443 892 2470 + 892 778 892 2468 891 2475 + 886 779 916 754 892 777 + 892 778 919 2442 891 2468 + 918 753 892 778 891 2469 + 892 778 892 778 918 2443 + 891 2469 892 2467 893 2469 + 891 778 918 753 892 + + name C + 3396 3283 891 2469 892 2468 + 892 778 917 2444 892 2468 + 892 2469 891 778 892 779 + 893 777 892 2468 892 2468 + 918 752 893 777 892 2469 + 892 778 892 778 867 802 + 918 2444 917 2442 868 2492 + 893 778 892 779 916 + + name 1 + 3424 3257 890 2470 865 2495 + 891 780 892 2468 865 2495 + 892 777 891 780 892 779 + 890 780 916 2444 865 805 + 891 779 917 753 916 2445 + 865 805 916 754 892 2469 + 865 2494 916 2445 865 2495 + 891 779 917 2443 866 + + name 2 + 3422 3258 916 2444 865 2496 + 889 782 915 2444 865 2495 + 917 2444 839 830 891 780 + 915 755 890 2470 864 806 + 917 753 891 780 866 2495 + 864 805 891 779 892 779 + 865 2494 865 2496 891 2469 + 865 805 891 2469 865 + + name 3 + 3397 3284 916 2443 892 2468 + 892 779 893 2467 892 2468 + 917 753 892 2469 891 778 + 893 778 891 2469 892 778 + 918 753 890 779 893 2468 + 891 779 893 778 891 2469 + 892 777 893 2468 891 2468 + 917 754 943 2417 892 + + name 4 + 3421 3261 890 2470 839 2520 + 917 753 891 2470 865 2495 + 917 2443 865 2495 890 781 + 891 778 891 2470 865 804 + 895 776 892 779 891 2468 + 866 805 917 753 943 727 + 866 805 889 2471 865 2494 + 892 780 916 2444 865 + + name 5 + 3396 3282 920 2441 892 2467 + 894 778 891 2468 892 2469 + 891 780 866 802 893 2470 + 890 779 918 2443 891 777 + 892 779 918 752 892 2468 + 892 779 918 752 918 2443 + 891 2469 891 779 891 2469 + 892 778 891 2468 893 + + name 6 + 3396 3284 918 2442 866 2494 + 892 778 917 2444 866 2494 + 917 2444 865 804 893 2468 + 890 780 916 2445 890 779 + 892 779 891 778 918 2443 + 891 778 892 779 892 779 + 891 2468 892 778 919 2444 + 889 778 893 2468 891 + + name 7 + 3398 3282 893 2467 892 2468 + 893 779 891 2469 891 2468 + 919 752 892 2467 892 2469 + 891 779 892 2468 892 777 + 893 778 918 752 892 2468 + 893 779 916 753 918 2442 + 892 779 891 778 893 2468 + 892 778 893 2467 892 + + name 8 + 3448 3232 892 2468 866 2494 + 892 779 892 2467 867 2494 + 891 2469 866 2495 891 2469 + 865 805 968 2394 864 804 + 918 753 891 779 892 2468 + 866 804 917 754 891 780 + 916 752 917 754 892 2469 + 865 804 893 2468 890 + + name 9 + 3422 3258 891 2469 839 2521 + 891 780 892 2468 824 2536 + 916 754 916 755 891 779 + 866 2494 839 2522 891 778 + 892 778 890 781 915 2448 + 837 831 891 779 890 2470 + 837 2523 942 2418 838 832 + 892 778 890 2471 839 + + name 0 + 3398 3284 891 2469 890 2469 + 893 779 891 2468 892 2468 + 892 2468 892 778 892 779 + 891 2469 892 2468 893 778 + 892 777 893 777 893 2469 + 891 778 892 779 868 802 + 917 2443 892 2469 890 779 + 891 779 892 2468 893 + + name LAST + 3422 3258 891 2471 916 2443 + 891 780 891 2469 272 3088 + 865 805 916 2445 308 3052 + 890 2469 892 779 915 756 + 889 781 889 780 890 2471 + 890 779 889 781 891 2471 + 272 1397 890 779 891 781 + 890 2469 448 2912 917 + + name FAV + 3423 3257 918 2442 944 2417 + 917 753 892 2469 890 2471 + 324 3036 890 2469 379 289 + 167 2525 891 2470 379 2981 + 890 780 378 270 242 781 + 866 806 889 2469 786 884 + 891 779 891 779 892 779 + 916 754 890 779 892 778 + 891 2470 839 + + name REW + 3420 3258 916 2445 326 3033 + 891 780 916 2443 891 2469 + 916 2445 838 831 918 754 + 890 2471 837 832 916 2444 + 838 832 891 779 916 2445 + 838 831 892 779 890 780 + 892 2469 839 2520 891 780 + 915 2444 836 836 890 + + name PLAY + 3448 3233 916 2444 891 2469 + 917 753 892 2468 918 2443 + 941 2420 891 2468 917 754 + 915 755 914 2446 918 2443 + 916 754 916 753 945 2416 + 943 727 941 729 918 752 + 917 753 919 2442 916 2444 + 915 755 943 728 916 + + name FF + 3420 3259 917 2442 946 2415 + 918 752 916 2445 918 2441 + 943 728 917 753 942 728 + 892 2470 864 806 889 2471 + 865 805 918 752 916 2443 + 944 726 892 779 891 2470 + 891 2469 915 2445 917 753 + 890 2471 222 1447 891 + + name PAUSE + 3421 3259 891 2470 787 2573 + 890 780 916 2444 840 2520 + 892 2468 864 806 917 2444 + 839 831 890 780 891 779 + 891 780 891 779 889 2471 + 839 831 916 755 915 754 + 892 2469 839 830 917 2444 + 840 2521 891 2469 840 + + name STOP + 3398 3284 889 2471 325 3036 + 891 779 890 2470 395 290 + 140 2535 889 781 890 781 + 889 2470 274 1397 891 2470 + 272 3087 917 754 890 780 + 889 2472 293 1377 890 779 + 916 2444 448 2913 916 754 + 866 2495 325 1344 891 779 + 915 + + name REC + 3421 3258 917 2444 916 2444 + 942 729 942 2420 889 2469 + 992 2367 942 730 891 2468 + 917 754 916 2443 892 2470 + 892 777 916 754 892 2467 + 943 730 916 754 891 779 + 917 2442 917 754 943 2417 + 918 753 915 754 892 + + name BYPASS + 3450 3231 891 2470 890 2470 + 917 753 916 2447 913 2445 + 273 3088 889 780 890 2470 + 891 2469 916 755 890 780 + 942 727 918 752 916 2444 + 890 782 916 754 865 805 + 891 2469 891 780 889 781 + 891 2468 259 3102 866 + + name TV/VCR + 19945 3915 612 1873 560 1926 + 560 1925 561 931 560 931 + 587 905 559 931 563 931 + 557 932 561 1925 585 908 + 583 1901 559 931 586 905 + 585 907 610 1875 561 1924 + 561 1926 559 1926 535 1951 + 559 1925 586 907 585 1899 + 560 931 1048 7898 3707 3862 + 587 1899 586 1899 586 1900 + 559 932 586 908 323 + + end raw_codes + + end remote diff --git a/abs/core-testing/LinHES-config/templates/xine.config.template b/abs/core-testing/LinHES-config/templates/xine.config.template new file mode 100644 index 0000000..966487f --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xine.config.template @@ -0,0 +1,754 @@ +# +# xine config file +# +.version:2 + +# Entries which are still set to their default values are commented out. +# Remove the '#' at the beginning of the line, if you want to change them. + +# Enable deinterlacing by default +# bool, default: 0 +#gui.deinterlace_by_default:0 + +# Configuration experience level +# { Beginner Advanced Expert Master of the known universe }, default: 0 +gui.experience_level:Expert + +# Enable OSD support +# bool, default: 1 +#gui.osd_enabled:1 + +# Dismiss OSD time (s) +# numeric, default: 3 +#gui.osd_timeout:3 + +# Ask user for playback with unsupported codec +# bool, default: 0 +#gui.play_anyway:0 + +# Automatically reload old playlist +# bool, default: 0 +#gui.playlist_auto_reload:0 + +# Audio visualization plugin +# { oscope fftscope fftgraph goom }, default: 0 +gui.post_audio_plugin:fftgraph + +# gui skin theme +# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4 +gui.skin:KeramicRH8 + +# Change xine's behavior for unexperienced user +# bool, default: 1 +#gui.smart_mode:1 + +# Snapshot location +# string, default: /home/jams +#gui.snapshotdir:/home/jams + +# Display splash screen +# bool, default: 1 +gui.splash:0 + +# Subtitle autoloading +# bool, default: 1 +#gui.subtitle_autoload:1 + +# Visual animation style +# { None Post Plugin Stream Animation }, default: 1 +#gui.visual_anim:Post Plugin + +# Windows stacking (more) +# bool, default: 0 +#gui.always_layer_above:0 + +# Audio mixer control method +# { Sound card Software }, default: 0 +#gui.audio_mixer_method:Sound card + +# Visiblility behavior of panel +# bool, default: 0 +#gui.auto_panel_visibility:0 + +# Visibility behavior of output window +# bool, default: 0 +#gui.auto_video_output_visibility:0 + +# Deinterlace plugin. +# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 +#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 + +# Event sender behavior +# bool, default: 1 +#gui.eventer_sticky:1 + +# Windows stacking +# bool, default: 0 +#gui.layer_above:0 + +# Use unscaled OSD +# bool, default: 1 +gui.osd_use_unscaled:0 + +# Screensaver reset interval (s) +# numeric, default: 10 +#gui.screensaver_timeout:10 + +# Menu shortcut style +# { Windows style Emacs style }, default: 0 +#gui.shortcut_style:Windows style + +# Stream information +# bool, default: 0 +#gui.sinfo_auto_update:0 + +# Skin Server Url +# string, default: http://xine.sourceforge.net/skins/skins.slx +#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx + +# Chapter hopping +# bool, default: 1 +#gui.skip_by_chapter:1 + +# New stream sizes resize output window +# bool, default: 1 +#gui.stream_resize_window:1 + +# Tips timeout (ms) +# numeric, default: 5000 +#gui.tips_timeout:5000 + +# gui tips visibility +# bool, default: 1 +#gui.tips_visible:1 + +# Name of video display +# string, default: +#gui.video_display: + +# Synchronized X protocol (debug) +# bool, default: 0 +#gui.xsynchronize:0 + +# Double size for small streams (require stream_resize_window) +# bool, default: 0 +#gui.zoom_small_stream:0 + +# Logo mrl +# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv +#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv + +# use XVidModeExtension when switching to fullscreen +# bool, default: 0 +#gui.use_xvidext:0 + +# height for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_height:-8192 + +# width for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_width:-8192 + +# x coordinate for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_x:-8192 + +# y coordinate for xinerama fullscreen (-8192 = autodetect) +# numeric, default: -8192 +#gui.xinerama_fullscreen_y:-8192 + +# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3) +# string, default: 0 1 +#gui.xinerama_use_screens:0 1 + +# Amplification level +# [0..200], default: 100 +#gui.amp_level:100 + +# gui panel visibility +# bool, default: 1 +gui.panel_visible:0 + +# numeric, default: 200 +gui.panel_x:21 + +# numeric, default: 100 +gui.panel_y:1050 + +gui.control_x:186 + +gui.control_y:46 + +gui.dropped_frames_warning:0 + +gui.eventer_x:1041 + +gui.eventer_y:781 + +gui.mrl_browser_x:23 + +gui.mrl_browser_y:9 + +gui.setup_x:717 + +gui.setup_y:227 + +gui.viewlog_x:200 + +gui.viewlog_y:210 + +# color specification yuv-opacity +# string, default: 8080c0-f +#gui.osdmenu.color_focused_button:8080c0-f + +# color specification yuv-opacity +# string, default: 808080-f +#gui.osdmenu.color_focused_slider:808080-f + +# color specification yuv-opacity +# string, default: ff8080-f +#gui.osdmenu.color_focused_slider_knob:ff8080-f + +# color specification yuv-opacity +# string, default: 808080-f +#gui.osdmenu.color_focused_text_border:808080-f + +# color specification yuv-opacity +# string, default: ff8080-f +#gui.osdmenu.color_focused_text_foreground:ff8080-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_label_border:0080c0-f + +# color specification yuv-opacity +# string, default: c08080-f +#gui.osdmenu.color_label_foreground:c08080-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_label_window:0080c0-f + +# color specification yuv-opacity +# string, default: 008000-f +#gui.osdmenu.color_slider:008000-f + +# color specification yuv-opacity +# string, default: ffff00-f +#gui.osdmenu.color_slider_knob:ffff00-f + +# color specification yuv-opacity +# string, default: 008000-f +#gui.osdmenu.color_text_border:008000-f + +# color specification yuv-opacity +# string, default: ffff00-f +#gui.osdmenu.color_text_foreground:ffff00-f + +# color specification yuv-opacity +# string, default: 0080c0-f +#gui.osdmenu.color_text_window:0080c0-f + +# directory a media in dvd device will be mounted +# string, default: /dvd +#gui.osdmenu.dvd_mountpoint:/dvd + +# palette (foreground-border-background) to use for subtitles and OSD +# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0 +#ui.osd.text_palette:white-black-transparent + +# audio driver to use +# { auto null alsa oss esd file none }, default: 0 +audio.driver:oss + +# a/v sync method to use by OSS +# { auto getodelay getoptr softsync probebuffer }, default: 0 +#audio.oss_sync_method:auto + +# use A/52 dynamic range compression +# bool, default: 0 +#audio.a52.dynamic_range:0 + +# downmix audio to 2 channel surround stereo +# bool, default: 0 +#audio.a52.surround_downmix:0 + +# A/52 volume +# [0..200], default: 100 +#audio.a52.level:100 + +# OSS audio device name +# { auto /dev/dsp /dev/sound/dsp }, default: 0 +#audio.device.oss_device_name:auto + +# OSS audio device number, -1 for none +# numeric, default: -1 +#audio.device.oss_device_number:-1 + +# OSS audio mixer number, -1 for none +# numeric, default: -1 +#audio.device.oss_mixer_number:-1 + +audio.device.alsa_front_device:default + +# speaker arrangement +# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1 +#audio.output.speaker_arrangement:Stereo 2.0 + +# offset for digital passthrough +# numeric, default: 0 +#audio.synchronization.passthrough_offset:0 + +# play audio even on slow/fast speeds +# bool, default: 0 +#audio.synchronization.slow_fast_audio:0 + +# method to sync audio and video +# { metronom feedback resample }, default: 0 +#audio.synchronization.av_sync_method:metronom feedback + +# always resample to this rate (0 to disable) +# numeric, default: 0 +#audio.synchronization.force_rate:0 + +# enable resampling +# { auto off on }, default: 0 +#audio.synchronization.resample_mode:auto + +# startup audio volume +# [0..100], default: 50 +#audio.volume.mixer_volume:50 + +# restore volume level at startup +# bool, default: 0 +#audio.volume.remember_volume:0 + +# video driver to use +# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0 +#video.driver:auto + +# pitch alignment workaround +# bool, default: 0 +#video.device.xv_pitch_alignment:0 + +# disable exact alpha blending of overlays +# bool, default: 0 +#video.output.disable_exact_alphablend:0 + +# disable all video scaling +# bool, default: 0 +#video.output.disable_scaling:0 + +# horizontal image position in the output window +# [0..100], default: 50 +#video.output.horizontal_position:50 + +# vertical image position in the output window +# [0..100], default: 50 +#video.output.vertical_position:50 + +# deinterlace method (deprecated) +# { none bob weave greedy onefield onefield_xv linearblend }, default: 4 +video.output.xv_deinterlace_method:linearblend + +# MPEG-4 postprocessing quality +# [0..6], default: 3 +#video.processing.ffmpeg_pp_quality:3 + +# DXR3 device number +# numeric, default: 0 +#dxr3.device_number:0 + +# swap odd and even lines +# bool, default: 0 +#dxr3.encoding.swap_fields:0 + +# add black bars to correct aspect ratio +# bool, default: 1 +#dxr3.encoding.add_bars:1 + +# use smooth play mode for mpeg encoder playback +# bool, default: 1 +#dxr3.encoding.alt_play_mode:1 + +# device used for CD audio +# string, default: /dev/cdrom +#media.audio_cd.device:/dev/cdrom + +# slow down disc drive to this speed factor +# numeric, default: 4 +#media.audio_cd.drive_slowdown:4 + +# query CDDB +# bool, default: 1 +#media.audio_cd.use_cddb:1 + +# CDDB cache directory +# string, default: /home/jams/.xine/cddbcache +#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache + +# CDDB server port +# numeric, default: 8880 +#media.audio_cd.cddb_port:8880 + +# CDDB server name +# string, default: freedb.freedb.org +#media.audio_cd.cddb_server:freedb.freedb.org + +# directory for saving streams +# string, default: +#media.capture.save_dir: + +# Number of dvb card to use. +# numeric, default: 0 +#media.dvb.adapter:0 + +# Remember last DVB channel watched +# bool, default: 1 +#media.dvb.remember_channel:1 + +# Last DVB channel viewed +# numeric, default: -1 +#media.dvb.last_channel:-1 + +# default language for DVD playback +# string, default: en +#media.dvd.language:en + +# region the DVD player claims to be in (1 to 8) +# numeric, default: 1 +#media.dvd.region:1 + +# device used for DVD playback +# string, default: /dev/dvd +#media.dvd.device:/dev/dvd + +# raw device set up for DVD access +# string, default: /dev/rdvd +#media.dvd.raw_device:/dev/rdvd + +# read-ahead caching +# bool, default: 1 +#media.dvd.readahead:1 + +# CSS decryption method +# { key disc title }, default: 0 +#media.dvd.css_decryption_method:key + +# play mode when title/chapter is given +# { entire dvd one chapter }, default: 0 +#media.dvd.play_single_chapter:entire dvd + +# unit for seeking +# { seek in program chain seek in program }, default: 0 +#media.dvd.seek_behaviour:seek in program chain + +# unit for the skip action +# { skip program skip part skip title }, default: 0 +#media.dvd.skip_behaviour:skip program + +# path to the title key cache +# string, default: /home/jams/.dvdcss/ +#media.dvd.css_cache_path:/home/jams/.dvdcss/ + +# file browsing start location +# string, default: /home/jams +#media.files.origin_path:/home/jams + +# list hidden files +# bool, default: 0 +#media.files.show_hidden_files:0 + +# network bandwidth +# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10 +#media.network.bandwidth:1.5 Mbps (T1) + +# Timeout for network stream reading (in seconds) +# numeric, default: 30 +#media.network.timeout:30 + +# Domains for which to ignore the HTTP proxy +# string, default: +#media.network.http_no_proxy: + +# HTTP proxy host +# string, default: +#media.network.http_proxy_host: + +# HTTP proxy password +# string, default: +#media.network.http_proxy_password: + +# HTTP proxy port +# numeric, default: 80 +#media.network.http_proxy_port:80 + +# HTTP proxy username +# string, default: +#media.network.http_proxy_user: + +# MMS protocol +# { auto TCP HTTP }, default: 0 +#media.network.mms_protocol:auto + +# automatically advance VCD track/entry +# bool, default: 1 +#media.vcd.autoadvance:1 + +# VCD default type to use on autoplay +# { MPEG track entry segment playback-control item }, default: 3 +#media.vcd.autoplay:playback-control item + +# CD-ROM drive used for VCD when none given +# string, default: +#media.vcd.device: + +# VCD position slider range +# { auto track entry }, default: 0 +#media.vcd.length_reporting:auto + +# show 'rejected' VCD LIDs +# bool, default: 0 +#media.vcd.show_rejected:0 + +# VCD format string for stream comment field +# string, default: %P - Track %T +#media.vcd.comment_format:%P - Track %T + +# VCD debug flag mask +# numeric, default: 0 +#media.vcd.debug:0 + +# VCD format string for display banner +# string, default: %F - %I %N%L%S, disk %c of %C - %v %A +#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A + +# v4l radio device +# string, default: /dev/v4l/radio0 +#media.video4linux.radio_device:/dev/v4l/radio0 + +# v4l video device +# string, default: /dev/v4l/video0 +#media.video4linux.video_device:/dev/v4l/video0 + +# device used for WinTV-PVR 250/350 (pvr plugin) +# string, default: /dev/video0 +#media.wintv_pvr.device:/dev/video0 + +# path to RealPlayer codecs +# string, default: /usr/lib/win32 +#decoder.external.real_codecs_path:/usr/lib/win32 + +# path to Win32 codecs +# string, default: /usr/lib/win32 +#decoder.external.win32_codecs_path:/usr/lib/win32 + +# subtitle size +# { tiny small normal large very large huge }, default: 1 +#subtitles.separate.subtitle_size:small + +# subtitle vertical offset +# numeric, default: 0 +#subtitles.separate.vertical_offset:0 + +# font for subtitles +# string, default: sans +#subtitles.separate.font:sans + +# encoding of the subtitles +# string, default: iso-8859-1 +#subtitles.separate.src_encoding:iso-8859-1 + +# use unscaled OSD if possible +# bool, default: 1 +#subtitles.separate.use_unscaled_osd:1 + +# default duration of subtitle display in seconds +# numeric, default: 4 +#subtitles.separate.timeout:4 + +# frames per second to generate +# numeric, default: 14 +#effects.goom.fps:14 + +# goom image height +# numeric, default: 240 +#effects.goom.height:240 + +# goom image width +# numeric, default: 320 +#effects.goom.width:320 + +# colorspace conversion method +# { Fast but not photorealistic Slow but looks better }, default: 0 +#effects.goom.csc_method:Fast but not photorealistic + +# number of audio buffers +# numeric, default: 230 +#engine.buffers.audio_num_buffers:230 + +# number of video buffers +# numeric, default: 500 +#engine.buffers.video_num_buffers:500 + +# default number of video frames +# numeric, default: 15 +#engine.buffers.video_num_frames:15 + +# priority for a/52 decoder +# numeric, default: 0 +#engine.decoder_priorities.a/52:0 + +# priority for bitplane decoder +# numeric, default: 0 +#engine.decoder_priorities.bitplane:0 + +# priority for dts decoder +# numeric, default: 0 +#engine.decoder_priorities.dts:0 + +# priority for dvaudio decoder +# numeric, default: 0 +#engine.decoder_priorities.dvaudio:0 + +# priority for dxr3-mpeg2 decoder +# numeric, default: 0 +#engine.decoder_priorities.dxr3-mpeg2:0 + +# priority for dxr3-spudec decoder +# numeric, default: 0 +#engine.decoder_priorities.dxr3-spudec:0 + +# priority for faad decoder +# numeric, default: 0 +#engine.decoder_priorities.faad:0 + +# priority for ffmpeg-wmv8 decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpeg-wmv8:0 + +# priority for ffmpeg-wmv9 decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpeg-wmv9:0 + +# priority for ffmpegaudio decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpegaudio:0 + +# priority for ffmpegvideo decoder +# numeric, default: 0 +#engine.decoder_priorities.ffmpegvideo:0 + +# priority for gdkpixbuf decoder +# numeric, default: 0 +#engine.decoder_priorities.gdkpixbuf:0 + +# priority for gsm610 decoder +# numeric, default: 0 +#engine.decoder_priorities.gsm610:0 + +# priority for image decoder +# numeric, default: 0 +#engine.decoder_priorities.image:0 + +# priority for mad decoder +# numeric, default: 0 +#engine.decoder_priorities.mad:0 + +# priority for mpc decoder +# numeric, default: 0 +#engine.decoder_priorities.mpc:0 + +# priority for mpeg2 decoder +# numeric, default: 0 +#engine.decoder_priorities.mpeg2:0 + +# priority for nsf decoder +# numeric, default: 0 +#engine.decoder_priorities.nsf:0 + +# priority for pcm decoder +# numeric, default: 0 +#engine.decoder_priorities.pcm:0 + +# priority for qta decoder +# numeric, default: 0 +#engine.decoder_priorities.qta:0 + +# priority for qtv decoder +# numeric, default: 0 +#engine.decoder_priorities.qtv:0 + +# priority for real decoder +# numeric, default: 0 +#engine.decoder_priorities.real:0 + +# priority for realadec decoder +# numeric, default: 0 +#engine.decoder_priorities.realadec:0 + +# priority for rgb decoder +# numeric, default: 0 +#engine.decoder_priorities.rgb:0 + +# priority for spucc decoder +# numeric, default: 0 +#engine.decoder_priorities.spucc:0 + +# priority for spucmml decoder +# numeric, default: 0 +#engine.decoder_priorities.spucmml:0 + +# priority for spudec decoder +# numeric, default: 0 +#engine.decoder_priorities.spudec:0 + +# priority for spudvb decoder +# numeric, default: 0 +#engine.decoder_priorities.spudvb:0 + +# priority for sputext decoder +# numeric, default: 0 +#engine.decoder_priorities.sputext:0 + +# priority for theora decoder +# numeric, default: 0 +#engine.decoder_priorities.theora:0 + +# priority for vorbis decoder +# numeric, default: 0 +#engine.decoder_priorities.vorbis:0 + +# priority for win32a decoder +# numeric, default: 0 +#engine.decoder_priorities.win32a:0 + +# priority for win32v decoder +# numeric, default: 0 +#engine.decoder_priorities.win32v:0 + +# priority for yuv decoder +# numeric, default: 0 +#engine.decoder_priorities.yuv:0 + +# media format detection strategy +# { default reverse content extension }, default: 0 +#engine.demux.strategy:default + +# memcopy method used by xine +# { probe libc kernel mmx mmxext sse }, default: 0 +engine.performance.memcpy_method:libc + +# percentage of discarded frames to tolerate +# numeric, default: 10 +#engine.performance.warn_discarded_threshold:10 + +# percentage of skipped frames to tolerate +# numeric, default: 10 +#engine.performance.warn_skipped_threshold:10 + +# allow implicit changes to the configuration (e.g. by MRL) +# bool, default: 0 +#misc.implicit_config:0 + diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC new file mode 100644 index 0000000..b2cd709 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.ATSC @@ -0,0 +1,33 @@ +ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750 + +ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525 + +ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync + +ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ + +ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ + +ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace + +ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace + +Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace + +Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace + +Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace + +Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace + +Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace + +Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace + +Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 + +Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace + +Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + +Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD new file mode 100644 index 0000000..9e846d0 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.DVD @@ -0,0 +1,9 @@ +#DVD-NativeModes +ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace +ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace +ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525 +ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525 diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC new file mode 100644 index 0000000..5536c1b --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.NTSC @@ -0,0 +1,10 @@ +#Analog-RegularModes +ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace +ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525 +ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace +ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525 +ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace +ModeLine "Broadcast-59.94p" 483 484 492 525 +ModeLine "VHS-59.94i" 483 484 492 525 Interlace +ModeLine "VHS-59.94p" 483 484 492 525 + diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA new file mode 100644 index 0000000..a026f64 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.VESA @@ -0,0 +1,163 @@ +# 640x350 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync + +# 640x400 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync + +# 720x400 @ 85Hz (VESA) hsync: 37.9kHz +ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync + +# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz +ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync + +# 640x480 @ 72Hz (VESA) hsync: 37.9kHz +ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync + +# 640x480 @ 75Hz (VESA) hsync: 37.5kHz +ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync + +# 640x480 @ 85Hz (VESA) hsync: 43.3kHz +ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync + +# 800x600 @ 56Hz (VESA) hsync: 35.2kHz +ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync + +# 800x600 @ 60Hz (VESA) hsync: 37.9kHz +ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync + +# 800x600 @ 72Hz (VESA) hsync: 48.1kHz +ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync + +# 800x600 @ 75Hz (VESA) hsync: 46.9kHz +ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync + +# 800x600 @ 85Hz (VESA) hsync: 53.7kHz +ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync + +# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz +ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace + +# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz +ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync + +# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz +ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync + +# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz +ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync + +# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz +ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync + +# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz +ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync + +# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz +ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync + +# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz +ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync + +# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz +ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync + +# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz +ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync + +# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz +ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync + +# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz +ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync +# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz +ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz +ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz +ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz +ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync + +# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz +ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync + +# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz +ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync + +# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz +ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync + +# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz +ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync + +# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz +ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync + +# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz +ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync + +# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz +ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync + +# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz +ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync + +# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz +ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync + +# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz +ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync + +# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz +ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync + +# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz +ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync + +# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz +ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync + +# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz +ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync + +# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz +ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync + +# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz +ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync + +# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz +ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync + +# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz +ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync + +# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz +ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync + +# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz +ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync + +# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz +ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync + +# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz +ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync + +# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz +ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync + +# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz +ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync + +# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz +ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync + +# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz +ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync + +# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz +ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync diff --git a/abs/core-testing/LinHES-config/templates/xorg/modeline.custom b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom new file mode 100644 index 0000000..ca6d678 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/modeline.custom @@ -0,0 +1 @@ +ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati new file mode 100644 index 0000000..c6d9249 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.ati @@ -0,0 +1,94 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "aticonfig-Screen[0]" 0 0 + InputDevice "Mouse0" "CorePointer" + InputDevice "Keyboard0" "CoreKeyboard" +EndSection + +Section "Files" + RgbPath "/usr/share/X11/rgb" + ModulePath "/usr/lib/xorg/modules" + FontPath "/usr/share/fonts/misc" + FontPath "/usr/share/fonts/75dpi" + FontPath "/usr/share/fonts/100dpi" + FontPath "/usr/share/fonts/TTF" + FontPath "/usr/share/fonts/Type1" +EndSection + +Section "Module" + Load "xtrap" + Load "dbe" + Load "record" + Load "extmod" + Load "dri" + Load "type1" + Load "freetype" +EndSection + +Section "InputDevice" + Identifier "Keyboard0" + Driver "kbd" +EndSection + +Section "InputDevice" + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/input/mice" + Option "ZAxisMapping" "4 5 6 7" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Monitor Vendor" + ModelName "Monitor Model" +EndSection + +Section "Monitor" + Identifier "aticonfig-Monitor[0]" +# HorizSync +# VertRefresh + Option "VendorName" "ATI Proprietary Driver" + Option "ModelName" "Generic Autodetecting Monitor" + Option "DPMS" "true" +EndSection + +Section "Device" + + ### Available Driver options are:- + ### Values: : integer, : float, : "True"/"False", + ### : "String", : " Hz/kHz/MHz" + ### [arg]: arg optional + #Option "ShadowFB" # [] + #Option "DefaultRefresh" # [] + #Option "ModeSetClearScreen" # [] + Identifier "Card0" + Driver "vesa" + VendorName "ATI Technologies Inc" + BoardName "RV370 5B60 [Radeon X300 (PCIE)]" + BusID "PCI:1:0:0" +EndSection + +Section "Device" + Identifier "aticonfig-Device[0]" + Driver "fglrx" +#INSERT HERE + +# Option "ForceMonitors" "tv,nocrt1,notmds1" +# Option "TVStandard" "SCART" +# Option "TVFormat" "PAL-B" +EndSection + + +Section "Screen" + Identifier "aticonfig-Screen[0]" + Device "aticonfig-Device[0]" + Monitor "aticonfig-Monitor[0]" + DefaultDepth 24 + SubSection "Display" + Viewport 0 0 + Depth 24 + Modes "640x480" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel new file mode 100644 index 0000000..a4d258a --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.intel @@ -0,0 +1,148 @@ +Section "ServerLayout" + Identifier "Xorg Configured" + Screen 0 "Screen0" 0 0 + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "PS/2 Mouse" "CorePointer" +# Serial Mouse not detected +# USB Mouse not detected +EndSection + +Section "ServerFlags" + Option "AllowMouseOpenFail" "true" + +EndSection + +Section "Files" + RgbPath "/usr/share/X11/rgb" + ModulePath "/usr/lib/xorg/modules" + FontPath "/usr/share/fonts/misc:unscaled" + FontPath "/usr/share/fonts/misc" + FontPath "/usr/share/fonts/75dpi:unscaled" + FontPath "/usr/share/fonts/75dpi" + FontPath "/usr/share/fonts/100dpi:unscaled" + FontPath "/usr/share/fonts/100dpi" + FontPath "/usr/share/fonts/PEX" +# Additional fonts: Locale, Gimp, TTF... + FontPath "/usr/share/fonts/cyrillic" +# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" +# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" +# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! + FontPath "/usr/share/fonts/Type1" + FontPath "/usr/share/fonts/ttf/western" + FontPath "/usr/share/fonts/ttf/decoratives" + FontPath "/usr/share/fonts/truetype" + FontPath "/usr/share/fonts/truetype/openoffice" + FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" + FontPath "/usr/share/fonts/latex-ttf-fonts" + FontPath "/usr/share/fonts/defoma/CID" + FontPath "/usr/share/fonts/defoma/TrueType" +EndSection + +Section "Module" + Load "ddc" # ddc probing of monitor + Load "dbe" + Load "dri" + Load "extmod" + Load "glx" + Load "bitmap" # bitmap-fonts + Load "type1" + Load "freetype" + Load "record" +EndSection + +Section "InputDevice" + Identifier "Keyboard0" + Driver "keyboard" + Option "CoreKeyboard" + Option "XkbRules" "xorg" + Option "XkbModel" "pc105" + Option "XkbLayout" "" + Option "XkbVariant" "" +EndSection + +Section "InputDevice" + Identifier "Serial Mouse" + Driver "mouse" + Option "Protocol" "Microsoft" + Option "Device" "/dev/ttyS0" + Option "Emulate3Buttons" "true" + Option "Emulate3Timeout" "70" + Option "SendCoreEvents" "true" +EndSection + +Section "InputDevice" + Identifier "PS/2 Mouse" + Driver "mouse" + Option "Protocol" "auto" + Option "ZAxisMapping" "4 5" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "true" + Option "Emulate3Timeout" "70" + Option "SendCoreEvents" "true" +EndSection + +Section "InputDevice" + Identifier "USB Mouse" + Driver "mouse" + Option "Device" "/dev/input/mice" + Option "SendCoreEvents" "true" + Option "Protocol" "IMPS/2" + Option "ZAxisMapping" "4 5" + Option "Buttons" "5" +EndSection + +# Auto-generated by Archie mkxcfg + +Section "Monitor" + Identifier "Monitor0" + Option "DPMS" "true" +EndSection + +# Auto-generated by Archie mkxcfg + +Section "Device" + Identifier "Card0" + Driver "intel" + VendorName "All" + BoardName "All" +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + DefaultColorDepth 16 + SubSection "Display" + Depth 1 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 4 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 8 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 15 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 16 + Modes "800x600" + virtual 800 600 + EndSubSection + SubSection "Display" + Depth 24 + Modes "1024x768" "800x600" "640x480" + EndSubSection + SubSection "Display" + Depth 32 + Modes "1024x768" "800x600" "640x480" + EndSubSection +EndSection + +Section "DRI" + Mode 0666 +EndSection diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia new file mode 100755 index 0000000..dec0f42 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.nvidia @@ -0,0 +1,90 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "extmod" + Load "type1" + Load "freetype" + Load "glx" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" +# HorizSync +# VertRefresh + Option "DPMS" "false" + DisplaySize 203 153 + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +#INSERT MODELINE +EndSection + +Section "Device" + Identifier "Device0" + Driver "nvidia" + VendorName "NVIDIA Corporation" + Option "DPI" "100 x 100" + Option "NoLogo" "1" + +#INSERT HERE + +#END OPTIONS + +# Option "ConnectedMonitor" "DFP" +# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled" +# Option "DigitalVibrance" "0" +# Option "TransparentIndex" "0" +# Option "CursorShadowAlpha" "64" +# Option "CursorShadowXOffset" "4" +# Option "UseEdidFreqs" "True" +# Option "NvAGP" "1" + + + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 24 + SubSection "Display" + Depth 24 + Modes "1280x720" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via new file mode 100644 index 0000000..6dd7821 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.via @@ -0,0 +1,77 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "glx" + Load "extmod" + Load "type1" + Load "freetype" + Load "dri" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" + HorizSync 30.0 - 110.0 + VertRefresh 50.0 - 150.0 + Option "DPMS" "false" + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +EndSection + +Section "Device" + Identifier "Device0" + Driver "via" + VendorName "via" + Option "DPI" "100 x 100" + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 16 + SubSection "Display" + Depth 16 + Modes "800x600" + EndSubSection +EndSection + +Section "DRI" + Group "video" + Mode 0666 + EndSection diff --git a/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware new file mode 100755 index 0000000..843f2f4 --- /dev/null +++ b/abs/core-testing/LinHES-config/templates/xorg/xorg.conf.vmware @@ -0,0 +1,72 @@ +# nvidia-xconfig: X configuration file generated by nvidia-xconfig +# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 + +Section "ServerLayout" + Identifier "Layout0" + Screen 0 "Screen0" + InputDevice "Keyboard0" "CoreKeyboard" + InputDevice "Mouse0" "CorePointer" +EndSection + +Section "Files" + RgbPath "/usr/X11R6/lib/X11/rgb" +EndSection + +Section "Module" + Load "dbe" + Load "extmod" + Load "type1" + Load "freetype" + Load "glx" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Mouse0" + Driver "mouse" + Option "Protocol" "auto" + Option "Device" "/dev/psaux" + Option "Emulate3Buttons" "no" + Option "ZAxisMapping" "4 5" +EndSection + +Section "InputDevice" + # generated from default + Identifier "Keyboard0" + Driver "keyboard" +EndSection + +Section "Monitor" + Identifier "Monitor0" + VendorName "Unknown" + ModelName "Unknown" + HorizSync 30.0 - 110.0 + VertRefresh 50.0 - 150.0 + Option "DPMS" "false" + Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync + Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync + ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync + Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync + ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 +EndSection + +Section "Device" + Identifier "Device0" + Driver "vmware" + VendorName "NVIDIA Corporation" + Option "DPI" "100 x 100" + + +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Device0" + Monitor "Monitor0" + DefaultDepth 24 + SubSection "Display" + Depth 24 + Modes "1280x720" + EndSubSection +EndSection + diff --git a/abs/core-testing/LinHES-config/timezip.py b/abs/core-testing/LinHES-config/timezip.py new file mode 100755 index 0000000..505b4a4 --- /dev/null +++ b/abs/core-testing/LinHES-config/timezip.py @@ -0,0 +1,185 @@ +#!/usr/bin/python +# import MySQL module +#used to import the zipcode/timezone/nfs info fromMBE +import MySQLdb +import sys +import getopt +import socket + + +def usage(): + print " -h --help" + print " -d --installdb" + print " -m --masterdb" + print " -n --hostname of current machine" + +def printvars(): + print "masterdb: " + masterdb + print "installdb:" + installdb + print "hostname: " + thishostname + print "BEhostname:" + BEhostname + print "zipcode:" + zipcode + print "timezone:" + tz + print "nfsip:" + nfsip + print "nfstoggle:" + nfstoggle + print "nfsmount:" + nfsmount + print "hobbitclient:" + hobbitclient +# connect +def selectvars(): + + global BEhostname + global zipcode + global tz + global nfsip + global nfstoggle + global nfsmount + global hobbitclient + + db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg") + # create a cursor + cursor = db.cursor() + # execute SQL statement + cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb)) + result = cursor.fetchone() + BEhostname=result[0] + + cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + zipcode = result[0] + except TypeError: + zipcode="" + + cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfsip=result[0] + except TypeError: + nfsip="" + + cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfstoggle=result[0] + except TypeError: + nfstoggle="" + + cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + nfsmount=result[0] + except TypeError: + nfsmount="" + + cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname)) + result = cursor.fetchone() + try: + tz=result[0] + except TypeError: + tz="" + + if ( thishostname != BEhostname ): + cursor.execute("select data from settings where value='GlobalServiceHobbitserver'") + result = cursor.fetchone() + try: + hobbitclient=result[0] + except TypeError: + hobbitclient="0" + + + +def insertvars(): + + db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg") + cursor = db.cursor() +#inserting the zipcode + cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( zipcode!="" ): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname)) + print "inserting zipcode" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname)) + print "updating zipcode" + +#inserting the timezone + cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( tz != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname)) + print "inserting timezone" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname)) + print "updating timezone" + + +#start of NFSIP + cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( nfsip != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname)) + print "inserting nfsip" + + if (nfstoggle != ""): + cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname)) + print "inserting nfstoggle" + + if ( nfsmount !="") : + cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname)) + print "inserting nfsmountpoint" + +#hobbitclient + cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname)) + result = cursor.fetchone() + if ( tz != ""): + if (result == None): + cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname)) + print "inserting hobbitcleint" + else: + cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname)) + print "updating hobbitclient" + + +def main(argv): + global masterdb + global installdb + global thishostname + thishostname="" + global BEhostname + global zipcode + global tz + global nfsip + global hobbitclient + try: + opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] ) + except getopt.GetoptError: + sys.exit(2) + for opt, arg in opts: + if opt in ("-h", "--help"): + usage() + sys.exit() + elif opt in ( "-d" , "--installdb"): + installdb = arg + elif opt in ("-m", "--masterdb"): + masterdb = arg + elif opt in ("-n", "--hostname"): + thishostname = arg + + if ( thishostname == "" ): + thishostname = socket.gethostname() + + selectvars() + printvars() + insertvars() +if __name__ == "__main__": + main(sys.argv[1:]) + diff --git a/abs/core-testing/LinHES-config/timezone.bin b/abs/core-testing/LinHES-config/timezone.bin new file mode 100755 index 0000000..a11d65a Binary files /dev/null and b/abs/core-testing/LinHES-config/timezone.bin differ diff --git a/abs/core-testing/LinHES-config/xconfig.sh b/abs/core-testing/LinHES-config/xconfig.sh new file mode 100755 index 0000000..42603d6 --- /dev/null +++ b/abs/core-testing/LinHES-config/xconfig.sh @@ -0,0 +1,233 @@ +#!/bin/bash +BASE="" +. /etc/profile +#TEMPLATES="/usr/share/templates" + +function Xvalues { + VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2` + echo $VGACARDTYPE + currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '` + } + +function presetupX { +if [ x$XUseAdvanced = x1 ] +then + if [ x$XIgnoreConfig = x1 ] + then + echo "Using User supplied X" + if [ -f $BASE/data/home/mythtv/templates/xorg.user ] + then + cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF + else + echo "Didn't find the file" + echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF + fi + else + setupAdvancedX + fi +else + setupX +fi + +} + +function setupAdvancedX { +echo "#doing the advanced" > /tmp/options + Xcatagory=` echo $Xresadvanced |cut -d_ -f1` + Xres=` echo $Xresadvanced |cut -d_ -f2` + echo $Xcatagory + if [ x$Xcatagory = "xNvidia" ] + then + Xres="" + if [ $XnVidia1080p = "1" ] + then + Xres="${Xres} \"1920x1080_60\"" + fi + if [ $XnVidia1080i = "1" ] + then + Xres="${Xres} \"1920x1080_60i\"" + fi + if [ $XnVidia720p = "1" ] + then + Xres="${Xres} \"1280x720_60\"" + fi + if [ $XnVidia480p = "1" ] + then + Xres="${Xres} \"720x480_60\"" + fi + ML="\t Modes ${Xres}" + else + + ML="\t Modes \"${Xres}\"" + fi + echo $ML + case $Xcardtype in + NVIDIA|nVidia ) + + case $Xconnection in + DVI) ConnectedMonitor=DFP ;; + vga) ConnectedMonitor=CRT;; + Auto) ConnectedMonitor=Auto;; + TV) ConnectedMonitor=TV + echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options + echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options + ;; + esac + if [ $ConnectedMonitor = Auto ] + then + echo "auto connection" + else + echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options + echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options + echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options + fi + + if [ x$XignoreEDID = x1 ] + then + EDIDvalue=true + EDIDFREQ=false + DS=" DisplaySize $XDisplaysize" + HS=" HorizSync $XHsync" + VR=" VertRefresh $XVrefresh" + else + EDIDvalue=false + EDIDFREQ=true + DS="# Display size edid used " + HS="#Hsync edid used " + VR="#Vertrefresh edid used " + + fi + echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options + echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options + + + sed -e "s/^.*Modes.*$/${ML}/" \ + -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ + -e "s/^.*DisplaySize.*$/ $DS/" \ + -e "s/^#.*HorizSync.*$/ $HS/g" \ + -e "s/^#.*VertRefresh.*$/ $VR/g" \ + -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF + + ;; + ati|ATI) + case $Xconnection in + DVI) ConnectedMonitor="tmds1,nocrt1,notv";; + VGA) ConnectedMonitor="crt1,notmds1,notv" ;; + TV) ConnectedMonitor="tv,nocrt1,notmds1" + echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options + echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options + ;; + + esac + + + if [ x$XignoreEDID = x1 ] + then + DS=" DisplaySize $XDisplaysize" + HS=" HorizSync $XHsync" + VR=" VertRefresh $XVrefresh" + else + DS="# Display size edid used " + HS="#Hsync edid used " + VR="#Vertrefresh edid used " + + fi + + echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options + + sed -e "s/^.*Modes.*$/\t $ML/" \ + -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ + -e "s/^.*DisplaySize.*$/ $DS/" \ + -e "s/^#.*HorizSync.*$/ $HS/g" \ + -e "s/^#.*VertRefresh.*$/ $VR/g" \ + -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF + ;; + + via|VIA|Via) echo "no via here" + ;; + + *) + echo "unknown card type" + ;; + esac +} + + + +function setupX { + Xvalues + echo "$currentmode ____ ${Xres}" + #if [ ! x${currentmode} = x\"${Xres}\" ] + if [ x = x ] + then + case $VGACARDTYPE in + nVidia ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -R libgl-dri +# pacman --noconfirm -S nvidia-STB nvidia-utils + pacman --noconfirm -S nvidia nvidia-utils + fi + ;; + VMware ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF + ;; + + VIA ) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -R nvidia-STB nvidia-utils + pacman --noconfirm -S libgl-dri + fi + + ;; + Intel) + sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF + if [ ! x$TESTMODE = "xtest" ] + then + pacman --noconfirm -Rd nvidia-utils + pacman --noconfirm -S libgl-dri + fi + ;; + + *) #XCONF=`hwd -x |grep etc` + XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-` + + + cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF + ;; + esac + fi + +} + +#MAIN +TESTMODE=$1 +if [ x$TESTMODE = "xtest" ] +then + XORG_CONF="/tmp/xorg.conf.test" + XUseAdvanced="1" + XIgnoreConfig="${2}" + Xcardtype="${3}" + XIgnoreEDID="${4}" + Xconnection="${5}" + XHsync="${6}" + XVrefresh="${7}" + Xresadvanced="${8}" + XTVstandard="${9}" + XTVconnection="${10}" + XDisplaysize="${11}" +else + if [ -f /etc/systemconfig ] + then + . /etc/systemconfig + else + Xres="800x600" + fi + XORG_CONF="/etc/X11/xorg.conf" +fi +presetupX + + diff --git a/abs/core-testing/live-installer/LinHES-release b/abs/core-testing/live-installer/LinHES-release deleted file mode 100644 index a4de764..0000000 --- a/abs/core-testing/live-installer/LinHES-release +++ /dev/null @@ -1 +0,0 @@ -LinHES R6.00.02 diff --git a/abs/core-testing/live-installer/MythVantage.sh b/abs/core-testing/live-installer/MythVantage.sh deleted file mode 100755 index 286c908..0000000 --- a/abs/core-testing/live-installer/MythVantage.sh +++ /dev/null @@ -1,3 +0,0 @@ -export MV_ROOT=/usr/MythVantage -export PATH=$PATH:$MV_ROOT/bin -export TEMPLATES=$MV_ROOT/templates diff --git a/abs/core-testing/live-installer/PKGBUILD b/abs/core-testing/live-installer/PKGBUILD deleted file mode 100755 index b8fc206..0000000 --- a/abs/core-testing/live-installer/PKGBUILD +++ /dev/null @@ -1,62 +0,0 @@ -pkgname=live-installer -pkgver=1.0 -pkgrel=93 -pkgdesc="Install and configure your system" -depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan) -arch=('i686') - -source=(mythinstall.bin myth_user_call file_time_offset.py install-ui.xml install_proxy.sh install_functions.sh systemconfig.sh install_db_chroot.sh restore_default_settings.sh xconfig.sh timezip.py soundconfig.sh LinHES-release issue MythVantage.sh create_master.sh build_diskless.sh networkconfig.sh timezone.bin autocard.py restore_km_db_chroot.sh) - -install=live.install -build() { - mkdir -p $startdir/pkg/etc - mkdir -p $startdir/pkg/usr/share/mythtv/themes/default - - MVDIR=$startdir/pkg/usr/MythVantage - mkdir $startdir/pkg/etc/profile.d - install -m 0755 MythVantage.sh $startdir/pkg/etc/profile.d/MythVantage.sh - mkdir -p $MVDIR/bin - mkdir -p $MVDIR/templates - mkdir -p $MVDIR/etc - -#copy in all the installer specific stuff - rsync -r --exclude=.svn ../templates $MVDIR/ - install -m0700 myth_user_call $MVDIR/bin/myth_user_call - install -m 0755 install_proxy.sh $MVDIR/bin/install_proxy.sh - install -m 0755 install_functions.sh $MVDIR/bin/install_functions.sh - install -m 0755 systemconfig.sh $MVDIR/bin/systemconfig.sh - install -m 0755 xconfig.sh $MVDIR/bin/xconfig.sh -# install -m 0755 live-install.sh $MVDIR/bin/live-install.sh - install -m 0755 install_db_chroot.sh $MVDIR/bin/install_db_chroot.sh - install -m 0755 restore_km_db_chroot.sh $MVDIR/bin/restore_km_db_chroot.sh - install -m 0755 restore_default_settings.sh $MVDIR/bin/restore_default_settings.sh - install -m 0755 soundconfig.sh $MVDIR/bin/soundconfig.sh - install -m 0755 networkconfig.sh $MVDIR/bin/networkconfig.sh - install -m 0755 create_master.sh $MVDIR/bin/create_master.sh - install -m 0755 build_diskless.sh $MVDIR/bin/build_diskless.sh - install -m 0755 timezone.bin $MVDIR/bin/timezone.bin - install -m 0755 timezip.py $MVDIR/bin/timezip.py - install -m 0755 autocard.py $MVDIR/bin/autocard.py - - mkdir -p $startdir/pkg/usr/bin - install -m 0755 file_time_offset.py $startdir/pkg/usr/bin/file_time_offset.py - #copy in the branding stuff - install -m 0755 LinHES-release $startdir/pkg/etc/LinHES-release - install -m 0755 issue $startdir/pkg/etc/issue - -# copy over the ui files - install -m 0755 install-ui.xml $startdir/pkg/usr/share/mythtv/themes/default/ - -#copy in the binaries - #install -g mythtv -m 4750 mythinstall.bin $MVDIR/bin/MythVantage - install -m 4755 mythinstall.bin $MVDIR/bin/MythVantage - cd $MVDIR/bin - ln -s MythVantage mythvantage - ln -s MythVantage mythinstall - cd - -# install -g mythtv -m 4750 mythbeselect.bin $MVDIR/bin/mythbeselect - -# install -m 0755 startx $startdir/pkg/root/startx -# install -m 0755 live-install.sh $startdir/pkg/root/live-install.sh -} - diff --git a/abs/core-testing/live-installer/add_service.sh b/abs/core-testing/live-installer/add_service.sh deleted file mode 100755 index 190d604..0000000 --- a/abs/core-testing/live-installer/add_service.sh +++ /dev/null @@ -1,15 +0,0 @@ -#!/bin/bash -SERVICE_DIR=/var/service -SCRIPT_DIR=/etc/sv -if [ -d $SCRIPT_DIR/$1 ] -then - if [ -d $SERVICE_DIR/$1 ] - then - echo "$1 already there" - else - ln -s $SCRIPT_DIR/$1 $SERVICE_DIR/$1 - echo "adding $1" - fi -else - echo "couldn't find $SCRIPT_DIR/$1" -fi diff --git a/abs/core-testing/live-installer/autocard.py b/abs/core-testing/live-installer/autocard.py deleted file mode 100755 index b59b8d6..0000000 --- a/abs/core-testing/live-installer/autocard.py +++ /dev/null @@ -1,302 +0,0 @@ -#!/usr/bin/python -# import MySQL module -#jm -import MySQLdb -import sys -import getopt -import socket -import os -import time -import string -import glob -from string import letters -from string import digits - -def INSERTCARD_INTOMYTH(Device,Driver,Cardvendor): - global currenthostname - print Device - print Driver, - print Cardvendor - cursor = db.cursor() - insert = "false" - if Driver == "ivtv" : - cardtype="MPEG" - defaultinput="Tuner 1" - insert="true" - if Cardvendor == "pcHDTV HD3000 HDTV": - insert="false" - cardtype ="whocares" - - #print insert - if insert == "true" : - cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,hostname) VALUES(%s,%s,%s,%s);",(Device,cardtype,defaultinput,currenthostname)) - -def INSERTHDR_INTOMYTH(deviceid,tuner_number): - cardtype='HDHOMERUN' - defaultinput='MPEG2TS' - global currenthostname - print deviceid - print cardtype - print defaultinput - print tuner_number - cursor = db.cursor() - #print insert - cursor.execute("INSERT INTO capturecard (videodevice,cardtype,defaultinput,dbox2_port ,hostname) VALUES(%s,%s,%s,%s,%s);",(deviceid,cardtype,defaultinput,tuner_number,currenthostname)) - -def INSERTAUTOCARD(): - global cardlist - global currenthostname - # create a cursor - cursor = db.cursor() - - - for i in range( 1 , len(cardlist)): - insert = "false" -# print cardlist[i] - Device=cardlist[i][0] - Driver=cardlist[i][1] - Cardvendor=cardlist[i][2] - Businfo=cardlist[i][3] - if Driver == "ivtv" : - insert="true" - devicestatus="unused" - if Cardvendor == "pcHDTV HD3000 HDTV": - insert="false" - cardtype ="whocares" - if Driver == "hdr": - insert="true" - devicestatus="unused" - - if insert == "true" : - cursor.execute("delete from autocard where uniqid=%s;",(Businfo)) - if Driver=="hdr": - Cardvendor="HDHOMERUN Tuner 1" - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - Cardvendor="HDHOMERUN Tuner 2" - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - - else: - cursor.execute("INSERT INTO autocard (dev,driver,description,uniqid,devicestatus,hostname) VALUES(%s,%s,%s,%s,%s,%s);",(Device,Driver,Cardvendor,Businfo,devicestatus,currenthostname)) - - - -def PRINTINFO(): - global cardlist - - for list in cardlist: - if list != "_placeholder_": - print list - #print "-------------" - -def GATHER_HDR(): - global cardlist - command="/usr/bin/hdhomerun_config --discover" - results=os.popen(command,'r') - line=results.readline() - if line.strip().split()[0] == "no": - print "HDHOMERUN not detected" - else: - print line - hdrdevice=line.strip().split()[2] - print hdrdevice - Driver="hdr" - Device=hdrdevice - Cardtype="HDHOMERUN" - Businfo=hdrdevice - cardprops = [Device,Driver , Cardtype , Businfo] - cardlist.append(cardprops) - - -def GATHER_v4l_CARDS(): - global cardlist - cardlist=["_placeholder_"] - # print "Looking for v4l cards" - try: - filelist = os.listdir('/dev/v4l/') - except OSError: - filelist=" " - #fakelist=['/dev/v4l/video3', 'ivtv', 'WinTV PVR 500 (unit #2)', '0000:04:09.0'] - #cardlist.append(fakelist) - try: - filelist = glob.glob("/dev/v4l/video?") - Driver="" - Cardtype="" - Businfo="" - numcards = 0 - for Device in filelist: - #print card - numcards = numcards+1 - cmd = 'v4l2-ctl -D -d' + Device - for line in os.popen(cmd).readlines(): - #print line - pos = string.find(line,"Driver name") - if pos >=0: - splitline= line.split(':') - Driver=splitline[1].strip() - pos = string.find(line,"Card type") - if pos >=0: - splitline= line.split(':') - Cardtype=splitline[1].strip() - - pos = string.find(line,"Bus info") - if pos >=0: - splitline= line.split(':',1) - Businfo=splitline[1].strip() - - #print Device,Driver , Cardtype , Businfo,numcards - cardprops = [Device,Driver , Cardtype , Businfo] - cardlist.append(cardprops) - except IOError: - print "no v4l cards found" - sys.exit(2) - - -def WRITEUDEV_IVTV(): - global insertmyth - cursor = db.cursor() - #add ivtv,cid lookup loop through until empty. - cursor.execute("select distinct(uniqid) from autocard where driver='ivtv' and devicestatus='will-add'") - cidrows = cursor.fetchall() - for row in cidrows: - cid=row[0] - cursor.execute("select dev,driver,description,devicestatus,hostname from autocard where uniqid=%s limit 1;",(cid)) - result = cursor.fetchone() - description=result[2] - driver='DRIVERS==\"ivtv\"' - ATTRNAME='ATTR{name}=="ivtv? encoder MPG"' - KERNELS='KERNELS==\"' - KERNELS+=cid - KERNELS+="\"" - #filter out non digit or chars - keep=letters.join(digits) - description=filter(lambda c: c in keep, description) - devnode="ivtv/" - #devnode+=description + "_" - udevcid=cid.partition(":") - devnode+=udevcid[2] - devnode+="_video" - UDEV_RULE=driver +', '+ATTRNAME+', '+ KERNELS +', ' + 'NAME=\"' + devnode + '"' - print "Here is the udev rule" - print UDEV_RULE - filename='/etc/udev/rules.d/11-ivtv-'+cid+'.rules' - file = open(filename,'w') - file.write(UDEV_RULE) - if ( insertmyth == "true"): - devnode="/dev/"+devnode - INSERTCARD_INTOMYTH(devnode,"ivtv",description) - cursor.execute("update autocard set devicestatus='done' where uniqid=%s;",(cid)) -#now insert HDR - cursor.execute("select distinct(uniqid),description from autocard where driver='hdr' and devicestatus='will-add'") - cidrows = cursor.fetchall() - for row in cidrows: - if ( insertmyth == "true"): - deviceid=row[0] - #cardtype="HDHOMRUN" - #defaultinput="MPEG2TS" - dbox2_port=row[1] - tuner_number=dbox2_port.rpartition(' ')[2] - INSERTHDR_INTOMYTH(deviceid,tuner_number) - cursor.execute("update autocard set devicestatus='done' where uniqid=%s and description=%s;",(deviceid,dbox2_port)) - - - -def CLEARAUTOCARD(): - cursor = db.cursor() - cursor.execute("delete from autocard") - -def RELOADUDEV(): - print "relaoding udev rules" - os.system('udevcontrol reload_rules') - os.system('rmmod ivtv') - os.system('udevtrigger') - - -def usage(): - print " -h help" - print " -g gather and print out the found cards" - print " -w write out the udev rules" - print " -i insert cards into myth that are marked will-add(only used with -w)" - print " -r reload udev rules" - print " -c clear the autocard db" - -def main(argv): - global db - global cardlist - global currenthostname - currenthostname="" - writeudev="false" - global insertmyth - insertmyth ="false" - - db = MySQLdb.connect(host="localhost", user="mythtv", passwd="mythtv", db="mythconverg") - try: - cursor = db.cursor() - cursor.execute("describe autocard;") - except MySQLdb.Error, e: - cursor.execute("create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50));") - print "table created" - - if ( currenthostname == "" ): - currenthostname = socket.gethostname() - - - try: - opts, args = getopt.getopt(argv, "hgwirc", ["help", "gathercards", "writeudev" ,"insert" , "reloadudev" , "clearautocard"] ) - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - usage() - sys.exit() - elif opt in ( "-g" , "--gathercards"): - GATHER_v4l_CARDS() - GATHER_HDR() - INSERTAUTOCARD() - PRINTINFO() - elif opt in ("-w", "--writeudev"): - writeudev="true" - elif opt in ("-i", "--insert"): - insertmyth="true" - elif opt in ( "-r" , "--reloadudev"): - RELOADUDEV() - elif opt in ( "-c" , "--clearautocard"): - CLEARAUTOCARD() - - - if ( writeudev == "true"): - WRITEUDEV_IVTV() - - - - - - -if __name__ == "__main__": - main(sys.argv[1:]) - - - - - -#mysql> create table autocard(dev varchar(50),driver varchar(50),description varchar(50),uniqid varchar(50), devicestatus varchar(50),hostname varchar(50)); -#Query OK, 0 rows affected (0.14 sec) - -#mysql> describe autocard; -#+--------------+-------------+------+-----+---------+-------+ -#| Field | Type | Null | Key | Default | Extra | -#+--------------+-------------+------+-----+---------+-------+ -#| dev | varchar(50) | YES | | NULL | | -#| driver | varchar(50) | YES | | NULL | | -#| description | varchar(50) | YES | | NULL | | -#| uniqid | varchar(50) | YES | | NULL | | -#| devicestatus | varchar(50) | YES | | NULL | | -#| hostname | varchar(50) | YES | | NULL | | -#+--------------+-------------+------+-----+---------+-------+ - - - - - - - - diff --git a/abs/core-testing/live-installer/bpopup-ui.xml b/abs/core-testing/live-installer/bpopup-ui.xml deleted file mode 100755 index df0598b..0000000 --- a/abs/core-testing/live-installer/bpopup-ui.xml +++ /dev/null @@ -1,164 +0,0 @@ - - - - - - - - #ffff00 - #000000 - 24 - 3,3 - yes - - - - #9999cc - 18 - yes - - - - #ffff00 - #000000 - 18 - 3,3 - yes - - - - #ffffff - 18 - yes - - - - #ffffff - 50 - yes - - - #ff0000 - #000000 - 16 - 2,2 - yes - - - - #ffff00 - 14 - yes - - - - 0,0,800,600 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/build_diskless.sh b/abs/core-testing/live-installer/build_diskless.sh deleted file mode 100755 index 4dfd5fc..0000000 --- a/abs/core-testing/live-installer/build_diskless.sh +++ /dev/null @@ -1,143 +0,0 @@ -#!/bin/bash -#CD=/mnt/cd -. /etc/profile -. /etc/systemconfig - -TFTP=/data/srv/tftp -CD=/data/srv/tftp/live -DESTCD=/data/srv/tftp/CD -BASE=/data/srv/tftp/masterbuild - -MODULES=$DESTCD/MythVantage/base/ -myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` -SRCFILES=$BASE/mnt/live/mnt/MythVantage/base/ - -function log () { -echo $1 -} - -function check_xvfb () { -export DISPLAY=127.0.0.1:25 - Xvfb -ac :25 & - -} - - -function create_base_image() { -echo $SRCFILES -if [ -f $SRCFILES/data.lzm ] -then - mkdir $HOST_IMG_DIR - cd $SRCFILES - echo "Creating image.." > $BASE/tmp/.install_state - LIST=`ls *.lzm` - for i in $LIST - do - echo $i - echo $i > $BASE/tmp/.install_percent - lzm2dir $i \/$HOST_IMG_DIR - done - - for i in sys proc dev tmp - do - mkdir /$HOST_IMG_DIR/$i - done - - chmod 777 /$HOST_IMG_DIR/tmp - mknod /$HOST_IMG_DIR/dev/null c 1 3 - mknod /$HOST_IMG_DIR/dev/null c 1 5 - mknod /$HOST_IMG_DIR/dev/console c 5 1 - chmod +s /$HOST_IMG_DIR/usr/bin/Xorg - chmod +s /$HOST_IMG_DIR/usr/bin/crontab - chmod +s /$HOST_IMG_DIR/usr/bin/sudo - chmod +s /$HOST_IMG_DIR/bin/mount - #copy fstab from masterbuild - cp -f $BASE/etc/fstab /$HOST_IMG_DIR/etc/fstab - echo "Done: installing data" > $BASE/tmp/.install_state - return 0 -else - echo "Error: no modules" > $BASE/tmp/.install_state - log "couldn't find modules to install" - return 1 -fi -} - -function configure_image () { - echo "Configuring system" > $BASE/tmp/.install_state - cp -f $BASE/etc/systemconfig $HOST_IMG_DIR/etc/systemconfig - chown root:mythtv $HOST_IMG_DIR/etc/systemconfig - chmod 775 "$HOST_IMG_DIR" /etc/systemconfig - cp /etc/mtab $HOST_IMG_DIR/etc/mtab - mount --bind /dev $HOST_IMG_DIR/dev - - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install -#copy syssettings template to here. - SE=$BASE$TEMPLATES/settings/syssettings - mkdir -p $HOST_IMG_DIR/$TEMPLATES/settings/syssettings - cp -rp $SE/* ${HOST_IMG_DIR}/$TEMPLATES/settings/syssettings - chown root:mythtv $HOST_IMG_DIR/etc/systemconfig - chown -R mythtv:mythtv $HOST_IMG_DIR/$TEMPLATES/settings/syssettings - chmod -R 775 $HOST_IMG_DIR/$TEMPLATES/settings/syssettings -#update remotedb with this host settings - OLDDISPLAY=$DISPLAY - check_xvfb - chroot $HOST_IMG_DIR $MV_ROOT/bin/MythVantage -t restore,default_1 - chroot $HOST_IMG_DIR $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - if [ ! $? = 0 ] - then - touch $mountpoint/tmp/.dbsysfailed - chmod 777 $mountpoint/tmp/.dbsysfailed - else - #Run second time - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,this_is_install - chroot "$HOST_IMG_DIR" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - fi -chroot "$HOST_IMG_DIR" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install -cp -f $BASE/etc/X11/xorg.conf $HOST_IMG_DIR/etc/X11/xorg.conf -echo "Done" > $BASE/tmp/.install_state -DISPLAY=$OLDDISPLAY - -#cp /tmp/mythvantage_install.log $HOST_IMG_DIR/var/log/ -} - -function create_tftp_boot () { - - CFGFILE=$TFTP/pxelinux.cfg/01-$2 - echo "DEFAULT mythfe" > $CFGFILE - echo "LABEL mythfe" >> $CFGFILE - echo "kernel masterbuild/boot/vmlinuz26STB" >> $CFGFILE - echo "append vga=normal root=/dev/nfs rw netboot nfsroot=$myip:/data/srv/tftp/$1 ip=dhcp init=/sbin/runit" >> $CFGFILE - echo "TIMEOUT 2" >> $CFGFILE -} - -function create_nfs_export () { -echo "/data/srv/tftp/$1 *(rw,no_root_squash,anonuid=1000,anongid=1000) " >> /etc/exports -exportfs -arv -} - -#-------------------------------------------------------------------------------MAIN PROGRAM --------------------------------------------------------------------- -if [ x$1 = x -o x$2 = x ] -then - echo "usage: hostname macaddress" - exit 1 -fi - -image_name=$1 -mac_address=`echo $2| tr "[:upper:]" "[:lower:]"` - -echo "using image_name of $image_name" -echo "using mac_address of $mac_address" - -HOST_IMG_DIR=$TFTP/$1 - -create_base_image $image_name -configure_image -umount $HOST_IMG_DIR/dev -create_tftp_boot $image_name $mac_address -create_nfs_export $image_name - - - - -#create_dhcp_entry $mac_address - diff --git a/abs/core-testing/live-installer/checkout_MythVantage.sh b/abs/core-testing/live-installer/checkout_MythVantage.sh deleted file mode 100755 index 764e418..0000000 --- a/abs/core-testing/live-installer/checkout_MythVantage.sh +++ /dev/null @@ -1,47 +0,0 @@ -#!/bin/bash -MYDIR=`pwd` -MYTHPATH="\/data\/LinHES-PKGBUILD\/abs\/core-testing\/mythtv\/stable\/mythtv\/src\/mythtv-0.21" - -function setup_links { -rm mythinstall.bin -rm mythbeselect.bin -ln -s $MYDIR/src/MythVantage-app/mythinstall/mythinstall ./mythinstall.bin -ln -s $MYDIR/src/MythVantage-app/mythbeselect/mythbeselect ./mythbeselect.bin -} - -function dl_repo { -mkdir src -cd src -if [ ! -d MythVantage-app ] -then - git clone http://mythvantage.com/MythVantage-app.git/ - cd MythVantage-app - git checkout --track -b LinHES origin/LinHES - cd $MYDIR - setup_links - cd - -else - echo "updating exisiting tree" - cd MythVantage-app - git pull - git checkout master - git merge - cd - -fi - -cd MythVantage-app -git checkout master -#git checkout origin/LinHES - -} - -dl_repo -sed -i "s/^MYTHPATH.*$/MYTHPATH\=\"$MYTHPATH\"/g" $MYDIR/src/MythVantage-app/mythinstall/mythinstall.pro -sed -i "s/#define __MVAPP__/\/\/#define __MVAPP__/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h -sed -i "s/mythvantage/LinHES/g" $MYDIR/src/MythVantage-app/mythinstall/mv_common.h - -cd $MYDIR/src/MythVantage-app/mythinstall && qmake -make || exit 1 -cd $MYDIR/src/MythVantage-app/mythbeselect && qmake -make ||exit 1 - diff --git a/abs/core-testing/live-installer/create_master.sh b/abs/core-testing/live-installer/create_master.sh deleted file mode 100755 index 1e641b4..0000000 --- a/abs/core-testing/live-installer/create_master.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/bash -#CD=/mnt/cd -CD=/data/srv/tftp/live -DESTCD=/data/srv/tftp/CD -DEST=/data/srv/tftp/masterbuild -MODULES=$DESTCD/MythVantage/base/ -myip=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - -mkdir -p $DESTCD -mkdir -p $DEST - -mount $CD -status=0 -if [ -f $CD/MythVantage/base/data.lzm ] -then - status=0 -else - status=1 -fi -if [ x$status = x0 ] -then - echo "copying to disk" - cp -rp $CD/* $DESTCD - cd $MODULES - for i in *.lzm - do - echo $i - lzm2dir $i \/$DEST - done - for i in sys proc dev tmp - do - mkdir $DEST/$i - done - chmod 777 /$DEST/tmp - mknod $DEST/dev/null c 1 3 - mknod $DEST/dev/null c 1 5 - mknod $DEST/dev/console c 5 1 - chmod +s $DEST/usr/bin/Xorg - chmod +s $DEST/usr/bin/crontab - chmod +s $DEST/usr/bin/sudo - chmod +s $DEST/bin/mount -fi -if [ ! -f $DEST/etc/fstab.bak ] -then - cp $DEST/etc/fstab $DEST/etc/fstab.bak -fi -tac $DEST/etc/fstab.bak|tail +4|tac > $DEST/etc/fstab -echo "$myip:/data/srv/tftp/masterbuild / nfs" >> $DEST/etc/fstab -echo "/data/srv/tftp/masterbuild *(rw,no_root_squash,anonuid=1000,anongid=1000)" >> /etc/exports - - -exportfs -arv - -#copy in the modules -mkdir -p $DEST/mnt/live/mnt/ -mv $DESTCD/* $DEST/mnt/live/mnt/ - diff --git a/abs/core-testing/live-installer/file_time_offset.py b/abs/core-testing/live-installer/file_time_offset.py deleted file mode 100755 index f2973d0..0000000 --- a/abs/core-testing/live-installer/file_time_offset.py +++ /dev/null @@ -1,39 +0,0 @@ -#!/usr/bin/python - - -import time -import os -import glob -import getopt -import sys -def main(argv): - filecount=0 -# root = "/tmp" -# offset = 4 - now = int(time.time()) - - - try: - opts, args = getopt.getopt(argv, "hs:d:") - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - print "-s seconds -d /testdir" - print "default if 4 seconds" - sys.exit() - elif opt in ( "-s" ): - offset = int(arg) - elif opt in ("-d"): - root = arg - - for item in glob.glob(root+"/*"): - lastmodDate = os.path.getmtime(item) - tdiff= now-lastmodDate - #print tdiff, offset - - if tdiff > offset: - filecount+=1 - print filecount -if __name__ == "__main__": - main(sys.argv[1:]) diff --git a/abs/core-testing/live-installer/install-ui.xml b/abs/core-testing/live-installer/install-ui.xml deleted file mode 100755 index 0ec9ddb..0000000 --- a/abs/core-testing/live-installer/install-ui.xml +++ /dev/null @@ -1,175 +0,0 @@ - - - - - - - - #ffff00 - #000000 - 24 - 3,3 - yes - - - - #9999cc - 18 - yes - - - - #ffff00 - #000000 - 18 - 3,3 - yes - - - - #ffffff - 18 - yes - - - - #ffffff - 50 - yes - - - #ff0000 - #000000 - 16 - 2,2 - yes - - - - #ffff00 - 14 - yes - - - #9999cc - 12 - no - - - - 0,0,800,600 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/install_db_chroot.sh b/abs/core-testing/live-installer/install_db_chroot.sh deleted file mode 100755 index 514dd3c..0000000 --- a/abs/core-testing/live-installer/install_db_chroot.sh +++ /dev/null @@ -1,52 +0,0 @@ -#!/bin/bash -. /etc/profile -. /etc/systemconfig -#myhost=`cat /etc/hostname` -myhost=$hostname -hostname $myhost -mount -t proc none /proc -pacman --noconfirm -Sf mysql -/etc/rc.d/mysqld - -status=1 -mysqlstatus=1 -while [ ! $status = 0 ] -do - /etc/rc.d/mysqld stop - sleep 1 - /etc/rc.d/mysqld start - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql -e "show databases;" - showstatus=$? - if [ $showstatus = 0 ] - then - pacman --noconfirm -R mythdb-initial - pacman --noconfirm -S mythdb-initial - $MV_ROOT/bin/restore_default_settings.sh -c load - DISPLAY=127.0.0.1:0 $MV_ROOT/bin/MythVantage -t restore,default_1 - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - $MV_ROOT/bin/systemconfig.sh misc,hostype,this_is_install - if [ $SystemType = "Master_backend" ] - then - $MV_ROOT/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - fi - #update database to allow user jobs on this host. - $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW - $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - #if [ -d /data/srv/mysql/mythconverg ] - if [ -d /var/lib/mysql/mythconverg ] - then - # pacman --noconfirm -R webcalendar - # pacman --noconfirm --nodeps -S webcalendar - status=0 - fi - fi - fi -done -#/etc/rc.d/mysqld stop -#umount /proc - - - diff --git a/abs/core-testing/live-installer/install_functions.sh b/abs/core-testing/live-installer/install_functions.sh deleted file mode 100755 index e5912da..0000000 --- a/abs/core-testing/live-installer/install_functions.sh +++ /dev/null @@ -1,449 +0,0 @@ -#!/bin/bash -. /etc/profile -disk=$2 -mountpoint=new_boot - -#------------------------------------------- -MYTHDBUSER=mythtv -MYTHTVPASSWD=mythtv -CMDLINE=$(cat /proc/cmdline) -hostname=`hostname` -MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD mythconverg -B --exec" -BASE="" - -function update_db_settings () { - - $MYSQLCMD_C "delete from settings where value='${1}' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set value='${1}', data='${2}' , hostname=\"$hostname\";" -} - -function random_theme () { -THEMES="basic-blue -basic-green -basic-red -basic-purple -basic-amber" - -theme=($THEMES) # Read into array variable. - -num_themes=${#theme[*]} # Count how many elements. - -pick=${theme[$((RANDOM%num_themes))]} -echo "Selected $pick as the theme" -update_db_settings Theme "$pick" -} - - -function setupremote { - mv -f $BASE/etc/lircd.conf $BASE/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` 2>/dev/null - if [ -d $TEMPLATES/remotes/$Remotetype ] - then - cd $TEMPLATES/remotes/$Remotetype - for i in lircd* - do - cat $i >> $BASE/etc/lircd.conf - done - cp -f lircrc* $BASE/etc/lircrc - chmod 755 /etc/lircrc - update_db_settings HostRemoteType "$Remotetype" - /usr/sbin/lircd -d /dev/lirc0 - mkdir /root/.mythtv - ln -s /etc/lircrc /root/.mythtv/lircrc - fi -} - -function scan_for_usb_remote () { -echo "Scanning for usb receiver/remote" -while read line -do - USBID=`echo "$line"|cut -d"|" -f1` - lsusb -d "$USBID" > /dev/null 2>/dev/null - if [ $? = 0 ] - then - Remotetype=`echo "$line"|cut -d"|" -f2` - echo "found $Remotetype" - setupremote - break - fi -done <$BASE/$TEMPLATES/remotes/receiver_usb.id -} - -function rest_of_network () { - #netmask - echo $CMDLINE | grep -q netmask - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*netmask=} - NETMASK=${TEMPVAR%% *} - /sbin/ifconfig eth0 $IP netmask $NETMASK - nm=`/usr/bin/nmconv.py -obits $NETMASK` - NETMASK="/$nm $NETMASK" - echo $NETMASK - update_db_settings HostNETMASK${MYTHDEFAULT} "$NETMASK" - else - echo "netmask not found" - fi - #gateway - echo $CMDLINE | grep -q gateway - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*gateway=} - GATEWAY=${TEMPVAR%% *} - /sbin/route add default gw $GATEWAY - update_db_settings HostGW${MYTHDEFAULT} "$GATEWAY" - - else - echo "gateway not found" - fi - - #dns - echo $CMDLINE | grep -q dns - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*dns=} - DNS=${TEMPVAR%% *} - echo "nameserver $DNS" >> /etc/resolv.conf - update_db_settings HostDNS${MYTHDEFAULT} "$DNS" - else - echo "DNS not found" - fi -} - -function init_network { - echo $CMDLINE |grep -q netdev - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*netdev=} - MYTHDEFAULT=${TEMPVAR%% *} - else - MYTHDEFAULT="eth0" - fi - - - - echo $CMDLINE | grep -q ip - if [ $? = 0 ] - then - update_db_settings HostDefaulteth0 0 - update_db_settings HostDefault${MYTHDEFAULT} 1 - - update_db_settings HostActiveonbooteth0 0 - update_db_settings HostActiveonboot${MYTHDEFAULT} 1 - update_db_settings HostNetDevice ${MYTHDEFAULT} - - TEMPVAR=${CMDLINE#*ip=} - IP=${TEMPVAR%% *} - if [ x$IP = xdhcp ] - then - /sbin/dhcpcd $MYTHDEFAULT - update_db_settings HostUseDHCP${MYTHDEFAULT} 0 - else - /sbin/ifconfig ${MYTHDEFAULT} $IP - update_db_settings HostUseDHCP${MYTHDEFAULT} 1 - update_db_settings HostIP${MYTHDEFAULT} "$IP" - rest_of_network - fi - fi -} - -function init_remote { - echo $CMDLINE | grep -q remoteport - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*remoteport=} - REMOTEPORT=${TEMPVAR%% *} - if [ x"$ReceiverType" = "xSerial" ] - then - if [ -e /dev/$REMOTEPORT ] - then - /usr/bin/setserial /dev/$REMOTEPORT uart none - /sbin/modprobe lirc_serial - update_db_settings HostReceiverType Serial - update_db_settings HostSerialPortlirc "$REMOTEPORT" - fi - fi - - fi - - echo $CMDLINE | grep -q remote - if [ $? = 0 ] - then - TEMPVAR=${CMDLINE#*remote=} - Remotetype=${TEMPVAR%% *} - setupremote - else - scan_for_usb_remote - fi -} - -#----------------------- - -#set -x - -partition_it () { -ROOT=$1 -DATA=$2 -SWAP=$3 - -if [ ! x$SWAP = xNO ] - then - SWAPLINE=",$SWAP,S" - MKSWAPCMD="mkswap /dev/${disk}2" - else - SWAPLINE=",0,0" - MKSWAPCMD="" - fi - -if [ x$DATA = xALL ] -then - DATALINE=",,," - EXTRALINE="" -else - DATALINE=",$DATA,," - EXTRALINE=",0,," -fi -sfdisk /dev/$disk -uM << EOF -,$1,,* -$SWAPLINE -$DATALINE -$EXTRALINE -; -EOF - -$MKSWAPCMD -#sfdisk -l /dev/$disk -} - - -function fscmd () { - -case $1 in - reiserfs) FSCMDC="mkreiserfs -q -l ROOT" - ;; - - xfs) FSCMDC="mkfs -t $1 -f" - ;; - ext3) FSCMDC="mkfs.ext3" - ;; - jfs) FSCMDC="mkfs.jfs -q " - ;; - *) FSCMDC="echo $1" - ;; - -esac -} - -format_it () { - fscmd $1 - $FSCMDC /dev/${disk}1| tr -s [:cntrl:] \\n - fscmd $2 - $FSCMDC /dev/${disk}3| tr -s [:cntrl:] \\n -} - -mount_it () { - if [ ! -d \/$mountpoint ] - then - mkdir \/$mountpoint - fi - mount /dev/${disk}1 \/$mountpoint - mkdir \/$mountpoint/myth - mount /dev/${disk}3 \/$mountpoint/myth -} - -unmount_it () { - umount /dev/${disk}1 - umount /dev/${disk}3 -} - - -copy_it () { - - if [ x$1 = xALL ] - then - echo "Transferring system" - unsquashfs -f -d /$mountpoint /.livesys/medium/system.sqf - else - echo "Upgrading system" - unsquashfs -e $1 -f -d /$mountpoint /.livesys/medium/system.sqf - fi - - for i in sys proc dev tmp - do - mkdir /$mountpoint/$i - - done - chmod 777 /$mountpoint/tmp - mknod /$mountpoint/dev/null c 1 3 - mknod /$mountpoint/dev/null c 1 5 - mknod /$mountpoint/dev/console c 5 1 - chmod +s /$mountpoint/usr/bin/Xorg - chmod +s /$mountpoint/usr/bin/crontab - chmod +s /$mountpoint/usr/bin/sudo - chmod +s /$mountpoint/bin/mount - -} - - -device_node () { - cd /dev - mknod hda b 3 0 - mknod hda1 b 3 1 - mknod hda2 b 3 2 - mknod hda3 b 3 3 - mknod hda4 b 3 4 - mknod hda5 b 3 5 - mknod hda6 b 3 6 - mknod hda7 b 3 7 - mknod hda8 b 3 8 - mknod sda b 8 0 - mknod sda1 b 8 1 - mknod sda2 b 8 2 - mknod sda3 b 8 3 - mknod sda4 b 8 4 - mknod sda5 b 8 5 - mknod sda6 b 8 6 - mknod sda7 b 8 7 - mknod sda8 b 8 8 - mknod sdb b 8 16 - mknod sdb1 b 8 17 - mknod sdb2 b 8 18 - mknod sdb3 b 8 19 - mknod sdb4 b 8 20 - mknod sdb5 b 8 21 - mknod sdb6 b 8 22 - mknod sdb7 b 8 23 - mknod sdb8 b 8 24 - cd - - } - - -function create_fstab() -{ -echo "creating fstab" -cat > /$mountpoint/etc/fstab << EOF -# -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 -/dev/cdrom /media/cdrom auto ro,user,noauto,unhide 0 0 -/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0 -UUID=ROOTUID / auto defaults 0 1 -UUID=DATAUID /myth auto defaults 0 1 -UUID=SWAPUID swap swap defaults 0 0 -EOF - - -} - - -function find_uuid() { - uuid=`blkid -s UUID /dev/$1 |cut -d= -f2|cut -d\" -f2` - echo $uuid for $1 - FOUNDUUID=$uuid - -} - - -case $1 in - partition_it ) - #drive ROOT DATA(ALL) SWAP(NO) - for i in `mount | grep $disk | awk ' { print $1 } '` - do - umount $i - done - swap=`cat /etc/fstab |grep $disk|grep swap|awk ' { print $1 } '` - swapoff $swap - partition_it $3 $4 $5 - exit 0 - - ;; - format_it ) - device_node - - format_it $3 $4 - exit 0 - ;; - mount_it ) - mount_it - ;; - copy_it ) - copy_it $3 - - ;; - - - fstab_fix_it) - echo $@ >> /tmp/fstab.input - if [ ! -f /$mountpoint/etc/fstab ] - then - create_fstab - fi - #was 5 - if [ x$3 = xUPGRADE ] - then - if [ ! -f /tmp/etc/KnoppMyth-version ] - then - if [ -f /tmp/etc/fstab ] - then - cp -f /tmp/etc/fstab /$mountpoint/etc/fstab - else - create_fstab - fi - else - create_fstab - fi - fi - - #search for UUID - FOUNDUUID="" - find_uuid ${2}1 - ROOTUUID=$FOUNDUUID - echo "--" - echo $ROOTUUID - echo "--" - FOUNDUUID="" - find_uuid ${2}2 - SWAPUUID=$FOUNDUUID - - FOUNDUUID="" - find_uuid ${2}3 - DATAUUID=$FOUNDUUID - - - sed -i -e "s/.*\/\ .*$/UUID=$ROOTUUID \/ auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab - sed -i -e "s/.*\/myth\ .*$/UUID=$DATAUUID \/myth auto defaults,noatime 0 1/g" /$mountpoint/etc/fstab - sed -i -e "s/.*swap\ .*$/UUID=$SWAPUUID swap swap defaults 0/g" /$mountpoint/etc/fstab - -#if Knoppmyth upgrade then loop through old fstab picking out vg - if [ -f /tmp/etc/KnoppMyth-version ] - then - if [ -f /tmp/etc/fstab ] - then - grep /dev/vg /tmp/etc/fstab >> /$mountpoint/etc/fstab - grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs mkdir - grep /dev/vg /tmp/etc/fstab | awk -v mount=$mountpoint ' { print "/" mount $2 }' |xargs chown -R mythtv:users - fi - fi - ;; - - grub_it ) - grub-install --recheck --no-floppy --root-directory=/$mountpoint "(hd0)" - #fixing grub/menu.1st - FOUNDUUID="" - find_uuid ${disk}1 - ROOTUUID=$FOUNDUUID - sed -i -e "s/root=.\S*/root=\/dev\/disk\/by-uuid\/$ROOTUUID/g" /$mountpoint/boot/grub/menu.lst - mkinitcpio -g /$mountpoint/boot/kernel26.img - ;; - umount_it) - umount \/$mountpoint/myth - umount \/$mountpoint - ;; - update_db_it ) - update_db_settings "$2" "$3" - ;; - - -esac - - - diff --git a/abs/core-testing/live-installer/install_proxy.sh b/abs/core-testing/live-installer/install_proxy.sh deleted file mode 100755 index bc89a1d..0000000 --- a/abs/core-testing/live-installer/install_proxy.sh +++ /dev/null @@ -1,526 +0,0 @@ -#!/bin/bash -#chroot and /tmp -MVHOSTNAME=larch5 -. /etc/profile -TEMP_TEMPLATES=/tmp/templates -disk=$2 -rootfs=$3 -rootsize=$4 -datafs=$5 -datasize=$6 -swapsize=$7 -mountpoint="/new_boot" -run=$MV_ROOT/bin/install_functions.sh -. /etc/systemconfig 2>/dev/null -. $MV_ROOT/bin/networkconfig.sh -CMDLINE=$(cat /proc/cmdline) - -#TEMPNET="Hostip"$default_interface -#eval MYTHIP=\$${TEMPNET} - - -progress () { -mypercent=`echo "$1" | cut -d. -f1` -if [ x$mypercent = x ] -then -echo "" > /tmp/.install_percent -else -echo "${mypercent}% complete" > /tmp/.install_percent -fi - - -} - -function apply_new_auth () { -#check if file is present - if [ -f /root/myth_user_call.out ] - then - #read in file, running each command in chroot - exec 4 /tmp/user_auth.update - fi - done - rm -f /root/myth_user_call.out - else - echo "No new password changes to apply" - fi -} - - -function backup_sql_check { - - if [ -f $mountpoint/myth/backup/mythconverg.sql.gz ] - then - return 0 - else - return 1 - fi -} - -function upgrade_mount_search { - MYTH_P=`cat /tmp/etc/fstab |grep /myth| awk ' {print $1 '} ` - umount $mountpoint/myth - mount $MYTH_P $mountpoint/myth - return 0 - -} - - -full_install () { - if [ -f /tmp/.this_is_upgrade ] - then - rm /tmp/.this_is_upgrade - fi - echo "Partitioning $disk" > /tmp/.install_state - progress 1 - sleep 1 - $run partition_it $disk $rootsize $datasize $swapsize - - echo "Formating $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs $datafs - - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Installing data" > /tmp/.install_state - - sleep 1 - $run copy_it $disk ALL - rm $mountpoint/etc/fstab - $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL - - progress 99 - sleep 1 - $run grub_it $disk - - - echo "Configuring system" > /tmp/.install_state - progress 100 - sleep 1 - cp -f /etc/systemconfig "$mountpoint"/etc - #run save syssettings to save settings, then copy to new mountpoint - $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost - SE=$TEMPLATES/settings/syssettings - mkdir -p ${mountpoint}$SE - cp -rp $SE/* ${mountpoint}$SE/ - chown root:mythtv "$mountpoint"/etc/systemconfig - chown -R mythtv:mythtv ${mountpoint}$SE - - chmod -R 775 ${mountpoint}$SE - chmod 775 "$mountpoint"/etc/systemconfig - #copy over any updates that might have occured - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - cp /etc/mtab "$mountpoint"/etc/mtab - apply_new_auth - - - if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] - then - #installing DB to local machine - #turn off old live database, so the chroot one can start - /etc/rc.d/mysqld stop - mount --bind /dev "$mountpoint/dev" - chroot "$mountpoint" "$MV_ROOT/bin/install_db_chroot.sh" > /tmp/chrootdb.out - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - echo "stopping mysql in chroot" - chroot "$mountpoint" /etc/rc.d/mysqld stop - umount "$mountpoint/dev" - - #/etc/rc.d/mysqld start - else - #update remotedb with this host settings - chroot "$mountpoint" DISPLAY=127.0.0.1:0 /usr/local/bin/MythVantage -t restore,default_1 - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - if [ ! $? = 0 ] - then - touch $mountpoint/tmp/.dbsysfailed - chmod 777 $mountpoint/tmp/.dbsysfailed - else - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - fi - fi - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced - touch $mountpoint/home/mythtv/.configure && chmod 777 $mountpoint/home/mythtv/.configure - - echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ - $run unmount_it $disk -} - -function createsquashlist(){ -if [ -f $1 ] -then - rm -f -$1 -fi -for i in bin boot etc home lib opt root sbin usr var -do -echo $i >> $1 -done - - -} - - - - -function upgrade () { - touch /tmp/.this_is_upgrade - - if [ ! x$rootfs = "xDo_not_format" ] - then - echo "Formating $disk" > /tmp/.install_state - progress 2 - sleep 1 - $run format_it $disk $rootfs NO - fi - echo "Preparing $disk" > /tmp/.install_state - progress 3 - sleep 1 - $run mount_it $disk - startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "` - echo "STARTSIZE=$startsize">/tmp/.startsize.io - echo "Installing data" > /tmp/.install_state - sleep 1 - cp -rf /tmp/etc /new_boot/etc.old - cp -rf /tmp/oss /new_boot/var/lib/oss.old - - - SQUASHLIST="/tmp/.squashlist" - createsquashlist $SQUASHLIST - $run copy_it $disk $SQUASHLIST - #copy back ssh keys - - cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/ - cp -fp /new_boot/etc.old/ssh/*.pub /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*.key /new_boot/etc/ssh/ - cp -fp /new_boot/etc.old/ssh/*key /new_boot/etc/ssh/ - - if [ ! -f /tmp/etc/KnoppMyth-version ] - then - #passwd/shadow/group - cp -fp /new_boot/etc.old/passwd /new_boot/etc/ - cp -fp /new_boot/etc.old/shadow /new_boot/etc/ - cp -fp /new_boot/etc.old/group /new_boot/etc/ - fi - - if [ x$rootfs = "xDo_not_format" ] - then - rootfs=`grep \/\ /tmp/etc/fstab |awk ' { print $3 } '` - fi - $run fstab_fix_it $disk UPGRADE - - echo "Writing boot sector" > /tmp/.install_state - progress 99 - sleep 1 - $run grub_it $disk - - echo "Configuring system" > /tmp/.install_state - progress - sleep 1 - cp /etc/mtab "$mountpoint"/etc/mtab - cp -f /etc/systemconfig "$mountpoint"/etc -#make sure mythconverg.sql.gz is present - if [ ! backup_sql_check ] - then - upgrade_mount_search - fi - - if [ -f /tmp/etc/KnoppMyth-version ] - then - #run save syssettings to save settings, then copy to new mountpoint - $MV_ROOT/bin/restore_default_settings.sh -c save -t syssettings -h $MVHOSTNAME -d localhost - SE=$TEMPLATES/settings/syssettings - mkdir -p ${mountpoint}$SE - cp -rp $SE/* ${mountpoint}$SE/ - chown root:mythtv "$mountpoint"/etc/systemconfig - chown -R mythtv:mythtv ${mountpoint}$SE - chmod -R 775 ${mountpoint}$SE - touch $mountpoint/home/mythtv/.kmupgrade && chmod 777 $mountpoint/home/mythtv/.kmupgrade - fi - - cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/ - chmod -R 755 ${mountpoint}/root - chown root:mythtv "$mountpoint"/etc/systemconfig - chmod 775 "$mountpoint"/etc/systemconfig - #mount /proc and /dev - mount --bind /dev "$mountpoint/dev" - mount --bind /proc "$mountpoint/proc" - - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - #wrap this in a network check_network, no need to update the db if the import worked. -##### do I need to start mysql? - /etc/rc.d/mysqld stop - chroot "$mountpoint" "$MV_ROOT/bin/restore_km_db_chroot.sh" > /tmp/chrootdb_km.out - if [ -f /tmp/etc/KnoppMyth-version ] - then - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t hostsettings - else - chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings - fi - # - #Run second time - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install - chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install - apply_new_auth - umount "$mountpoint/dev" - umount "$mountpoint/proc" - - echo "Done" > /tmp/.install_state - cp /tmp/mythvantage_install.log $mountpoint/var/log/ - - $run unmount_it $disk - /etc/rc.d/mysqld start -} - -function netboot-full_install () { - TEMPVAR=${CMDLINE#*nfsroot=} - NFSROOT=${TEMPVAR%% *} - NFSROOT=`echo $NFSROOT|cut -d: -f1` - MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -` - URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC" - echo "calling $URL" - echo "Starting" > /tmp/.install_state - curl $URL - ${MV_ROOT}/bin/xconfig.sh -} - -function killdhcp () { -if [ -f /etc/dhcpc/dhcpcd-eth0.pid ] - then - pid=`cat /etc/dhcpc/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /etc/dhcpc/dhcpcd-eth0.pid - rm -f /var/run/dhcpcd* - fi -if [ -f /var/run/dhcpcd-eth0.pid ] - then - pid=`cat /var/run/dhcpcd-eth0.pid` - kill -9 $pid - rm -f /var/run/dhcpcd-eth0.pid* - fi -ip address flush dev eth0 -} - - - -function SANE_SYSETTINGS () { -sed -e '/HOSTrootfstype/d' \ - -e '/HOSTrootfstype/d' \ - -e '/HOSTdatafstype/d' \ - -e '/HOSTOSsize/d' \ - -e '/HostUseALLdata/d' \ - -e '/HOSTDATAsize/d' \ - -e '/HOSTuprootfstype/d' \ - -e '/HostUseSWAP/d' \ - -e '/HOSTSWAPsize/d ' /tmp/templates/settings/syssettings/settings.txt > /tmp/settings.new - mv /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt -} - -case $1 in - full_install_it ) full_install ;; - - NETBOOT) -echo "-----------------------------------------------------------------------3-----" - netboot-full_install ;; - - find_update) - #TRY TO mount first partition of drive - #copy /etc/systemconfig to live, import settings into db - #umount drive - $run mount_it $disk - if [ -f /new_boot/etc/systemconfig ] - then - ###########ADD templates - mkdir -p $TEMP_TEMPLATES - cp -pr /new_boot/$TEMPLATES $TEMP_TEMPLATES - SANE_SYSETTINGS - cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/ - cp /new_boot/etc/systemconfig /etc/systemconfig - cp -rf /new_boot/etc /tmp/etc - cp -rf /new_boot/var/lib/oss /tmp/oss - - $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME -d 127.0.0.1 - else - cp -rf /new_boot/etc /tmp/etc - #now we search for the timezone and try to update - TZREGION=`cat /tmp/etc/timezone | cut -d"/" -f1` - TZSUB=`cat /tmp/etc/timezone | cut -d"/" -f2 -` - - - if [ $TZREGION = $TZSUB ] - then - $run update_db_it HostTimeZoneRegion "$TZREGION" - else - $run update_db_it HostTimeZoneRegion "$TZREGION" - $run update_db_it HostTimeZoneRegion_$TZREGION "$TZSUB" - fi - - - - fi - - - - $run umount_it $disk - ;; - - upgrade_it) - #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs + "&" - upgrade - - ;; - disk_model_it) - model="unknown" - size="xxx" - case $2 in - - h* ) - model=`cat /proc/ide/$2/model` - ;; - s*) model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '` - ;; - esac - size=`parted /dev/$2 print |grep Disk|awk ' { print $3 } ' ` - - - echo ""$model" $size " >/tmp/model - - ;; - network_check_it) - #Should never return from check_network - case $2 in - setup_network) - vnc_check - install_network_setup - ;; - - check_self) - myipdefault=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - ping -c 1 $myipdefault - if [ ! $? = 0 ] - then - exit 3 - #can't ping yourself - fi - ;; - check_gw) - #check gateway - mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'` - if [ ! x$mygwdefault = x ] - then - ping -c 1 $mygwdefault - if [ ! $? = 0 ] - then - exit 4 - fi - fi - ;; - check_ns) - #check nameserver - mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'` - ping -c 1 $mydns - if [ ! $? = 0 ] - then - exit 5 - fi - ;; - check_names) - host google.com - if [ ! $? = 0 ] - then - exit 6 - fi - ;; - host_names) - #if host is found, then check to see if it's online - #if not online, assume it's ok to use this hostname - - hout=`host $hostname` - status=$? - #found host, now grab the ip - if [ $status = 0 ] - then - hoip=`echo $hout|awk '{print $4}'` - ping -c 1 $hoip - if [ $? = 0 ] - then - status=0 - else - status=1 - fi - fi - - if [ $status = 0 ] - then - exit 7 - fi - - - ;; - - esac - exit 0 - ;; - - - * ) - state=`cat /tmp/.install_state` - if [ x"${state}" = "xConfiguring system" ] - then - progress "" - else - - if [ -f /tmp/.startsize.io ] - then - . /tmp/.startsize.io - #finding the drive - ddrive=`df | grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 ` - used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "` - used=`echo $used-$STARTSIZE|bc` - #echo $used - fi - - if [ ! x$used = x ] - then - . /root/.install_size - #somehow find if it's an install or update - if [ -f /tmp/.this_is_upgrade ] - then - total=$UPGRADESIZE - else - total=$TOTALSIZE - fi - percent=`echo "scale=2 ; ($used/$total) * 100 " |bc ` - cond2=$(echo "$percent > 100" |bc ) - if [ $cond2 -eq 1 ] - then - percent=100 - fi - cond3=$(echo "$percent < 3" |bc ) - if [ $cond3 -eq 0 ] - then - progress $percent - fi - fi - fi - ;; -esac - - - diff --git a/abs/core-testing/live-installer/issue b/abs/core-testing/live-installer/issue deleted file mode 100644 index 3c01679..0000000 --- a/abs/core-testing/live-installer/issue +++ /dev/null @@ -1 +0,0 @@ -LinHes \ No newline at end of file diff --git a/abs/core-testing/live-installer/live-install.sh b/abs/core-testing/live-installer/live-install.sh deleted file mode 100755 index 573bb1f..0000000 --- a/abs/core-testing/live-installer/live-install.sh +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -#redirect stderr to stdout, then rediret stdout to file -. /etc/profile -exec 2>&1 -exec > /tmp/mythvantage_install.log -. /etc/X11/STBWINDOWMANAGER -/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 -keylaunch & -/usr/bin/tilda & -/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & -export MALLOC_CHECK_=0 -if [ -f /opt/vmware/bin32/vmware-user-wrapper ] -then - /opt/vmware/bin32/vmware-user-wrapper & -fi -xhost + -CMDLINE=$(cat /proc/cmdline) -echo $CMDLINE |grep -q nfsroot -NFSROOT=$? -if [ x$NFSROOT = x1 ] -then - - unbuffer MythVantage & -else - NETBOOT=YES MythVantage & -fi - -exec $STBWINDOWMANAGER diff --git a/abs/core-testing/live-installer/live.install b/abs/core-testing/live-installer/live.install deleted file mode 100644 index a0a9d31..0000000 --- a/abs/core-testing/live-installer/live.install +++ /dev/null @@ -1,78 +0,0 @@ -# This is a default template for a post-install scriptlet. You can -# remove any functions you don't need (and this header). - -# arg 1: the new package version -pre_install() { - rm -f /etc/issue - rm -f /etc/arch-release - -} - -# arg 1: the new package version -post_install() { - if [ ! -f /etc/blacklist.package ] - then - echo "List of packages to ignore" > /etc/blacklist.package - echo "one package per line" >> /etc/blacklist.package - fi - -LINE="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/mythvantage" -LINE1="mythtv ALL = NOPASSWD:/usr/MythVantage/bin/MythVantage" -for i in "$LINE" "$LINE1" -do - cp /etc/sudoers /etc/sudoers.bak - grep -q "$i" /etc/sudoers - if [ $? != 0 ] - then - echo "$i" >> /etc/sudoers - visudo -cf /etc/sudoers - if [ ! $? = 0 ] - then - cp /etc/sudoers.bak /etc/sudoers - echo $i - echo "Error adding files" - exit 1 - fi - fi -done - - -} - -# arg 1: the new package version -# arg 2: the old package version -pre_upgrade() { - /bin/true -} - -# arg 1: the new package version -# arg 2: the old package version -post_upgrade() { - . /etc/profile - ps -ef|grep mysqld|grep -v grep - status=$? - echo "status $status" - if [ $status = 0 ] - then - restore_default_settings.sh -c load - fi - if [ ! -f /etc/blacklist.package ] - then - echo "List of packages to ignore" > /etc/blacklist.package - echo "one package per line" >> /etc/blacklist.package - fi -} - -# arg 1: the old package version -pre_remove() { - /bin/true -} - -# arg 1: the old package version -post_remove() { - /bin/true -} - -op=$1 -shift -$op $* diff --git a/abs/core-testing/live-installer/myth_user_call b/abs/core-testing/live-installer/myth_user_call deleted file mode 100644 index d95e468..0000000 --- a/abs/core-testing/live-installer/myth_user_call +++ /dev/null @@ -1,164 +0,0 @@ -#!/bin/bash -#Wrapper script to manage USERNAME accounts + web security -# myth_USERNAME_all -c add -u USERNAME -# myth_USERNAME_all -c delete -u USERNAME -# myth_USERNAME_all -c pass -u USERNAME -p pass -# myth_USERNAME_all -c web -u USERNAME -p pass - -INIT_CHECK=TRUE -FULL_CALL="$@" -function CHROOT_CHECK { - INIT=`ps -p 1 -o comm=` - if [ x$INIT = xrunit ] - then - CHROOT_NEEDED=FALSE - else - CHROOT_NEEDED=TRUE - fi -} - -function store_commands () { - echo "$FULL_CALL" >> /root/myth_user_call.out - chmod 600 /root/myth_user_call.out -} - - -function add_user() { - if [ $CHROOT_NEEDED = TRUE ] - then - echo "calling myth_call_user in chroot to add user" - store_commands - else - echo "adding user $USERNAME" - useradd -m -s /bin/bash $USERNAME -G audio,video,optical,storage,users - fi - -} - - -function del_user() { - if [ $CHROOT_NEEDED = TRUE ] - then - echo "calling myth_call_user in chroot to delete user" - store_commands - else - echo "removing user $USERNAME" - userdel $USERNAME - fi - -} - - -function pass_change() { - if [ $CHROOT_NEEDED = TRUE ] - then - echo "calling myth_call_user in chroot to change password" - store_commands - else - echo "changing password for $USERNAME" - echo $USERNAME:$PASSWORD | chpasswd - fi - -} - - -function web_security { - echo "this is just a stub" - -} - -function ARG_ERR() { - if [ x$OPTARG = "x" ] - then - echo "$SWITCH NEEDS AND ARG" - exit 11 - fi -} - - -function print_help { - - echo "Valid options are:" - echo " -c (add|delete|pass|web)" - echo " -u USERNAMEname" - echo " -p password" - exit 1 -} - -if [ $# -eq 0 ] -then - print_help -fi - -declare -r OPTSTRING="c:u:p:i" -while getopts "$OPTSTRING" SWITCH -do - case $SWITCH in - - c) ARG_ERR - OPERATION=$OPTARG - ;; - u) ARG_ERR - USERNAME=$OPTARG - ;; - p) ARG_ERR - PASSWORD=$OPTARG - ;; - i) INIT_CHECK=FALSE - - esac -done - -if [ $INIT_CHECK = TRUE ] -then - CHROOT_CHECK -else - CHROOT_NEEDED=FALSE -fi - -case $OPERATION in - add) - if [ x$USERNAME = x ] - then - print_help - fi - add_user - ;; - delete) - if [ x$USERNAME = x ] - then - print_help - fi - del_user - ;; - pass) - if [ x$USERNAME = x ] - then - print_help - fi - - if [ x$PASSWORD = x ] - then - print_help - fi - pass_change - ;; - - web) - if [ x$USERNAME = x ] - then - print_help - fi - - - if [ x$PASSWORD = x ] - then - print_help - fi - echo "adding webUSERNAME $USERNAME with $PASS" - ;; - *) print_help - ;; -esac - - diff --git a/abs/core-testing/live-installer/networkconfig.sh b/abs/core-testing/live-installer/networkconfig.sh deleted file mode 100644 index 61a7405..0000000 --- a/abs/core-testing/live-installer/networkconfig.sh +++ /dev/null @@ -1,280 +0,0 @@ -#!/bin/bash -#. /etc/profile -#. /etc/systemconfig -#BASE=/tmp -ETCNETDIR=$BASE/etc/net/ifaces - - - -function kill_dhcp () -{ -for i in ${BASE}/etc/dhcpc/dhcpcd-*.pid -do - if [ -f ${i} ] - then - pid=`cat ${i}` - kill -9 $pid - rm -f ${i} - fi - if [ x$1 = xflush ] - then - for ifdev in eth0 wlan0 eth1 wlan1 - do - echo ${i} |grep $ifdev - status=$? - if [ $status = 1 ] - then - ip address flush $ifdev - fi - done - fi - -done - -} - -function setup_nameserver(){ -grep -q $1 ${BASE}/etc/resolv.conf -status=$? -if [ ! $status = 0 ] -then - echo "nameserver $1" >> ${BASE}/etc/resolv.conf -fi - -} - -function setup_interfaces() { - local IS_WIRELESS - local ip - local netmask - local isactive - local dns - local UseDHCP - local GW - local ESSID - local KEY - local ENCRYPT - local TEMPNET - IS_WIRELESS=false - - #local ip - TEMPNET="Hostip"$1 - echo $TEMPNET - eval ip=\$${TEMPNET} - - TEMPNET=Hostnetmask$1 - eval netmask=\$${TEMPNET} - netmask=`echo "$netmask" | cut -d " " -f1` - - TEMPNET=HostActive$1 - eval isactive=\$${TEMPNET} - - TEMPNET=HostDNS$1 - eval dns=\$${TEMPNET} - - TEMPNET="HostUSEDHCP"$1 - eval UseDHCP=\$${TEMPNET} - - TEMPNET=HostGW$1 - eval GW=\$${TEMPNET} - - - - if [ $1 = wlan0 -o $1 = wlan1 ] - then - IS_WIRELESS=TRUE - TEMPNET=HostESSID$1 - eval ESSID=\$${TEMPNET} - - TEMPNET="HostKey"$1 - eval KEY=\$${TEMPNET} - - TEMPNET=HostUseEncryption$1 - eval ENCRYPT=\$${TEMPNET} - fi - - - echo "Setup $1 in progress, wireless: $IS_WIRELESS" - - if [ ! -d $ETCNETDIR/$1 ] - then - mkdir -p $ETCNETDIR/$1 - fi - - if [ ! -f $ETCNETDIR/$1/options ] - then - cp -f $TEMPLATES/etcnet/eth/options $ETCNETDIR/$1/options - fi - - if [ x$isactive = x0 ] - then - echo "setting $1 to inactive" - sed -i -e 's/^ONBOOT=.*$/ONBOOT=no/g' $ETCNETDIR/$1/options - - else - echo "setting $1 to active" - sed -i -e 's/^ONBOOT=.*$/ONBOOT=yes/g' $ETCNETDIR/$1/options - fi - - if [ x$IS_WIRELESS = xTRUE ] - then - echo "setting $1 wireless" - sed -i -e 's/^CONFIG_WIRELESS=.*$/CONFIG_WIRLESS=yes/g' $ETCNETDIR/$1/options - #set the key and essid - echo "essid $ESSID" > $ETCNETDIR/$1/iwconfig - if [ x$ENCRYPT = x1 ] - then - echo "key $KEY" >> $ETCNETDIR/$1/iwconfig - fi - - else - echo "disabling wireless" - sed -i -e 's/^CONFIG_WIRLESS=.*$/CONFIG_WIRLESS=no/g' $ETCNETDIR/$1/options - fi - - - - - if [ $UseDHCP = 0 ] - then - echo using dhcp - sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=dhcp/g' $ETCNETDIR/$1/options - - else - echo "using static ip" - sed -i -e 's/^BOOTPROTO=.*$/BOOTPROTO=static/g' $ETCNETDIR/$1/options - echo "default via $GW" > $ETCNETDIR/$1/ipv4route - echo "$ip$netmask" > $ETCNETDIR/$1/ipv4address - setup_nameserver $dns - fi -} - - -function find_active () { -#HostActiveeth1="1" -rm -f ${BASE}/etc/resolv.conf -if [ x$MYTHDHCP = x1 ] - then - #add 127.0.0.1 to /etc/resolv.conf - echo "search lan" > ${BASE}/etc/resolv.conf - echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf - fi - -for i in eth0 eth1 wlan0 wlan1 -do - CURRENTIF="HostActive"$i - eval IFSTATE=\$${CURRENTIF} - if [ x$IFSTATE = x1 ] - then - setup_interfaces $i - fi -done -} - -function setup_hostname { -#set the hostname -if [ ! x$hostname = x ] -then - echo $hostname > ${BASE}/etc/hostname - cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname > /tmp/hosts - #cat $BASE/etc/hosts |grep -v 127.0.0.1|grep -v $hostname | grep -v $ip > /tmp/hosts - - if [ x$MYTHDHCP = x1 ] - then - echo "127.0.0.1 localhost " > ${BASE}/etc/hosts - echo "$MYTHIP $hostname " >> ${BASE}/etc/hosts - else - echo "127.0.0.1 $hostname localhost " > ${BASE}/etc/hosts - fi - cat /tmp/hosts >> ${BASE}/etc/hosts -fi - -kill_dhcp -} - -function vnc_check() { - CMDLINE=$(cat /proc/cmdline) - echo $CMDLINE |grep -q vnc - USEVNC=$? - echo $CMDLINE |grep -q nfsroot - NETBOOT=$? - echo $USEVNC - if [ ! x$USEVNC = x0 ] - then - echo "not using vnc" - if [ ! x$NETBOOT = x0 ] - then - echo "not using netboot" - else - echo "using netboot" - USEVNC=0 - fi - - else - echo " using vnc" - fi -} - -function setup_MYTH_vars { - TEMPMYTH="Hostip"$default_interface - #echo $TEMPMYTH - eval MYTHIP=\$${TEMPMYTH} - - TEMPMYTH="HostUSEDHCP"$default_interface - eval MYTHDHCP=\$${TEMPMYTH} - - - -} - - - -function setup_network { - setup_MYTH_vars - setup_hostname - find_active -} - -function start_network { -if [ ! $USEVNC = 0 ] -then - /etc/net/scripts/network.init restart - -else - echo "VNC/NETBOOT in use, will NOT restart network" -fi - -} - -function stop_network { -if [ ! $USEVNC = 0 ] -then - echo "stopping the network" - kill_dhcp flush - ip address flush dev eth0 2>&1 >/dev/null - ip address flush dev eth1 2>&1 >/dev/null - ip address flush dev wlan0 2>&1 >/dev/null - ip address flush dev wlan1 2>&1 >/dev/null -else - echo "VNC/NETBOOT in use, will NOT restart network" -fi - -} - - -#this is used by the install process to start the network -function install_network_setup { - setup_MYTH_vars - setup_hostname - stop_network - find_active - start_network - -} - - - - - - - diff --git a/abs/core-testing/live-installer/remove_service.sh b/abs/core-testing/live-installer/remove_service.sh deleted file mode 100755 index 6cc4b4f..0000000 --- a/abs/core-testing/live-installer/remove_service.sh +++ /dev/null @@ -1,8 +0,0 @@ -#!/bin/bash -SERVICE_DIR=/var/service -SCRIPT_DIR=/etc/sv -if [ -e $SERVICE_DIR/$1 ] -then - echo "removing" - rm $SERVICE_DIR/$1 -fi diff --git a/abs/core-testing/live-installer/restore_default_settings.sh b/abs/core-testing/live-installer/restore_default_settings.sh deleted file mode 100755 index 5690f48..0000000 --- a/abs/core-testing/live-installer/restore_default_settings.sh +++ /dev/null @@ -1,349 +0,0 @@ -#!/bin/bash -. /etc/profile -. /etc/systemconfig -shopt -s -o nounset -echo $@ >> /tmp/restore.out -#TEMPLATES="/usr/share/templates/settings" -TEMPLATES="$TEMPLATES/settings" -TABLES="settings keybindings" -MYTHDBUSER=mythtv -MYTHTVPASSWD=mythtv -declare -r OPTSTRING="c:e:t:d:h:s:a:z:Ho" -Thistemplate="" -declare -i OVERRIDE=0 -declare -i EVERYTHING=0 - -function CMD_DEFINE () { - #add override check - if [ x$Thistemplate = xsyssettings -a $OVERRIDE -eq 1 ] - then - MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" - MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$ovdbhost mythconverg -B --exec" - MYSQLCMD_UPDATE_HOST="UPDATE settings set data='$oldhostname' where value='HostMyhostname' and hostname=\"$hostname\";" - else - MYSQLCMD="mysql --local-infile -s -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" - MYSQLCMD_C="mysql -u$MYTHDBUSER -p$MYTHTVPASSWD -h$dbhost mythconverg -B --exec" - MYSQLCMD_UPDATE_HOST="select hostname from settings;" - fi -} - -function SQL_DEFINE () { - #$1 is the table name - if [ $1 = "settings" ] - then - ALTERSQL="Alter table temp_${1}_${hostname} add unique ( value )" - else - ALTERSQL=";" - fi - - CREATESQL="create table temp_${1}_${hostname} like $1;" - COPY_TMP_SQL="replace into temp_${1}_${hostname} (select * from $1 where hostname=\"$hostname\");" - INSERTSQL="LOAD DATA local INFILE '/tmp/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" - #INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$Thistemplate/$1.txt' REPLACE INTO TABLE temp_${1}_${hostname} FIELDS TERMINATED BY '\t';" - DROPSQL="delete from $1 where hostname=\"$hostname\";" - COPY_BCK_SQL="replace into $1 (select * from temp_${1}_${hostname} where hostname=\"$hostname\");" - DROP_TABLE="Drop table temp_${1}_${hostname}" -} - -function ARG_ERR() { - if [ x$OPTARG = "x" ] - then - echo "$SWITCH NEEDS AND ARG" - exit 11 - fi -} - -function ALSADEVICE () { -#ALSA:hw:1,4 - if [ x$Audiotype = xALSA ] - then - SoundDevice=ALSA:$SoundDevice - fi -} - - - -if [ $# -eq 0 ] -then - echo "Valid options are:" - echo " -c (save|restore|load|uhostname|BECONFIG|ZIP|ACCESSCONTROL)" - echo " -t (syssettings|hostsettings)" - echo " -d databasename" - echo " -h hostname" - echo " -s systemtype (master|slave|standalone|frontendonly)" - echo " -a ipaddress" - echo " -z zipcode" - echo " -o override (only used upgrade installs)" - exit 1 -fi - - - - -while getopts "$OPTSTRING" SWITCH -do - case $SWITCH in - # \?) echo "unkown option" - # exit 11 ;; - c) echo "$SWITCH" "$OPTARG" - ARG_ERR - OPERATION=$OPTARG - ;; - t) echo "$SWITCH" "$OPTARG" - ARG_ERR - Thistemplate=$OPTARG - - if [ x$Thistemplate = x"syssettings" ] - then - echo "template is syssettings" - loadhost=false - elif [ x$Thistemplate = x"hostsettings" ] - then - echo "template is hostsettings" - Thistemplate=syssettings - loadhost=true - else - echo "invalid template name" - exit 1 - fi - ;; - d) echo "$SWITCH" "$OPTARG" - ARG_ERR - if [ $OVERRIDE = 1 ] - then - ovdbhost=$OPTARG - else - dbhost=$OPTARG - fi - ;; - h) echo "$SWITCH" "$OPTARG" - ARG_ERR - if [ $OVERRIDE = 1 ] - then - oldhostname=$hostname - hostname=$OPTARG - else - hostname=$OPTARG - fi - - ;; - s) echo "$SWITCH" "$OPTARG" - ARG_ERR - SYSTEMTYPE=$OPTARG - ;; - a) echo "$SWITCH" "$OPTARG" - ARG_ERR - IP_ADDRESS=$OPTARG - ;; - z) echo "$SWITCH" "$OPTARG" - ARG_ERR - ZIPCODE=$OPTARG - ;; - o) OVERRIDE=1 - ;; - - esac -done - -echo $OVERRIDE - -#setup the Mysql commands -CMD_DEFINE - -$MYSQLCMD_C "show tables" > /dev/null -status=$? -if [ $status = 1 ] -then - echo "$@ failed" - echo "$@ failed" >> /tmp/restore.out - exit 1 -fi - - - - - - - -case $OPERATION in - - restore) - #used to restore settings from syssettings - if [ -d $TEMPLATES/$Thistemplate ] - then - cd $TEMPLATES/$Thistemplate - if [ $loadhost = false ] - then - for i in $TABLES - do - SQL_DEFINE $i - sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt - #echo $MYSQLCMD "$SELECTSQL" - echo $i - $MYSQLCMD "$CREATESQL" - $MYSQLCMD "$ALTERSQL" - $MYSQLCMD "$COPY_TMP_SQL" - $MYSQLCMD "$INSERTSQL" - $MYSQLCMD "$DROPSQL" - $MYSQLCMD "$COPY_BCK_SQL " - $MYSQLCMD "$DROP_TABLE " - #rm /tmp/$i.txt - done - fi - if [ $loadhost = true ] - then - #only load the settings table with values HOST - i=settings - SQL_DEFINE $i - sed -e "s/REPLACEME/$hostname/g" $i.txt > /tmp/$i.txt - echo $i - $MYSQLCMD "$CREATESQL" - $MYSQLCMD "$ALTERSQL" - $MYSQLCMD "$INSERTSQL" - $MYSQLCMD "$COPY_TMP_SQL" - $MYSQLCMD "$DROPSQL" - $MYSQLCMD "$COPY_BCK_SQL" - $MYSQLCMD "$DROP_TABLE " - fi - else - echo "couldn't find $TEMPLATES/$Thistemplate" - fi - ;; - - save) - - if [ ! -d $TEMPLATES/$Thistemplate ] - then - mkdir -p $TEMPLATES/$Thistemplate - fi - - cd $TEMPLATES/$Thistemplate - for i in $TABLES - do - EXTRACLAUSE="" - case $i in - settings) - EXTRACLAUSE="and not (value like \"BackendServerIP\") and not (value like \"locale\") order by value" - SQL="select value,data,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - # SQL="select * from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt - ;; - keybindings) - SQL="select context,action,description,keylist,'REPLACEME' as hostname from $i where hostname=\"$hostname\" "$EXTRACLAUSE" ;" - $MYSQLCMD_C "$SQL" > $TEMPLATES/$Thistemplate/$i.txt - ;; - esac - # sed -e "s/$hostname/REPLACEME/g" $i > $i.txt && rm $i - - done - ;; - - load) - - #will load both default_1 and default_2 unless either file is not found - for i in default_1 default_2 - do - if [ -f $TEMPLATES/$i/settings.txt ] - then - echo $i - for tablename in $TABLES - do - #create table - CREATESQL="create table IF NOT EXISTS ${tablename}_${i} like $tablename;" - $MYSQLCMD_C "$CREATESQL" - #truncate table - TRUNCATESQL="truncate ${tablename}_${i} " - $MYSQLCMD_C "$TRUNCATESQL" - #load table - INSERTSQL="LOAD DATA local INFILE '$TEMPLATES/$i/$tablename.txt' REPLACE INTO TABLE ${tablename}_${i} FIELDS TERMINATED BY '\t';" - $MYSQLCMD_C "$INSERTSQL" - #update_hostname - UPDATEHOSTNAMESQL="update ${tablename}_${i} set hostname='$i' ; " - $MYSQLCMD_C "$UPDATEHOSTNAMESQL" - done - else - - echo "couldn't find $TEMPLATES/$i/settings.txt template to load" - fi - CREATESQL="create table IF NOT EXISTS settings_user1 like settings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS settings_user2 like settings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS settings_user3 like settings;" - $MYSQLCMD_C "$CREATESQL" - - CREATESQL="create table IF NOT EXISTS keybindings_user1 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS keybindings_user2 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - CREATESQL="create table IF NOT EXISTS keybindings_user3 like keybindings;" - $MYSQLCMD_C "$CREATESQL" - done -;; - - - - BECONFIG) - if [ $SYSTEMTYPE = "master" ] - then - $MYSQLCMD_C "UPDATE settings set data='${IP_ADDRESS}' where value='MasterServerIP';" - $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" - fi - - if [ $SYSTEMTYPE = "slave" ] - then - $MYSQLCMD_C "delete from settings where value='BackendServerIP' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='${IP_ADDRESS}' , value='BackendServerIP' , hostname=\"$hostname\";" - fi - ;; - ZIP) - $MYSQLCMD_C "delete from settings where value='locale' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE' , value='locale' , hostname=\"$hostname\";" - $MYSQLCMD_C "delete from settings where value='MythMovies.ZipCode' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$ZIPCODE', value='MythMovies.ZipCode' , hostname=\"$hostname\";" - ;; - MUSICFRONT) - ALSADEVICE - $MYSQLCMD_C "delete from settings where value='AudioOutputDevice' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='AudioOutputDevice' , hostname=\"$hostname\";" - #need to reload the settings. - systemconfig.sh reloadfe - ;; - MUSICMYTH) - ALSADEVICE - $MYSQLCMD_C "delete from settings where value='MusicAudioDevice' and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='$SoundDevice', value='MusicAudioDevice' , hostname=\"$hostname\";" - ;; - uhostname) - #used when the hostname is changed. - TABLES="settings capturecard keybindings storagegroup recorded" - for i in $TABLES - do - USQL="update $i set hostname=\"$oldhostname\" where hostname=\"$hostname\" ;" - $MYSQLCMD_C "$USQL" - done - - ;; - USERJOBALLOW) - SQL="update settings set data='1' where value like 'JobAllowUserJob%' and hostname=\"$hostname\" ;" - $MYSQLCMD_C "$SQL" - ;; - - ACCESSCONTROL) - LIST="Hostaccessnetwork Hostaccesshostype HostaccesshostypeSystemtype Hostaccessmisc Hostaccesssleep Hostaccessadvanced HostaccessadvancedX Hostaccesssound" - - for i in $LIST - do - $MYSQLCMD_C "delete from settings where value=\"$i\" and hostname=\"$hostname\";" - $MYSQLCMD_C "REPLACE INTO settings set data='1', value=\"$i\" , hostname=\"$hostname\";" - done - SQL="update settings set data='0' where value='HostaccesshostypeSystemtype' and hostname=\"$hostname\" ;" - $MYSQLCMD_C "$SQL" - esac - -#SELECT * INTO OUTFILE 'data.txt' -# FIELDS TERMINATED BY ',' -# FROM table2; - - diff --git a/abs/core-testing/live-installer/restore_km_db_chroot.sh b/abs/core-testing/live-installer/restore_km_db_chroot.sh deleted file mode 100644 index 9467ffd..0000000 --- a/abs/core-testing/live-installer/restore_km_db_chroot.sh +++ /dev/null @@ -1,53 +0,0 @@ -#!/bin/bash -. /etc/profile -. /etc/systemconfig -set -x -#myhost=`cat /etc/hostname` -myhost=$hostname -hostname $myhost -mount -t proc none /proc -DBFILE=$1 - -if [ $SystemType = "Master_backend" -o $SystemType = "Standalone" ] - then - #restore database - pacman --noconfirm -Sf mysql - status=1 - mysqlstatus=1 - while [ ! $status = 0 ] - do - /etc/rc.d/mysqld stop - sleep 1 - /etc/rc.d/mysqld start - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql -e "show databases;" - showstatus=$? - if [ $showstatus = 0 ] - then - #load database - pacman --noconfirm -R mythdb-initial - pacman --noconfirm -S mythdb-initial - echo "restoring old database" - gunzip -c /myth/backup/mythconverg.sql.gz > /myth/backup/mythconverg.sql - mysql mythconverg < /myth/backup/mythconverg.sql - - - if [ -d /var/lib/mysql/mythconverg ] - then - status=0 - fi - fi - fi - done - rm -f /myth/backup/mythconverg.sql - else - exit 0 - fi - -#/etc/rc.d/mysqld stop -#umount /proc - - - diff --git a/abs/core-testing/live-installer/soundconfig.sh b/abs/core-testing/live-installer/soundconfig.sh deleted file mode 100755 index 1adb447..0000000 --- a/abs/core-testing/live-installer/soundconfig.sh +++ /dev/null @@ -1,248 +0,0 @@ -#!/bin/bash -. /etc/systemconfig -. /etc/profile -echo $@ >/tmp/audio.call -#set -x -BASE="" -. /etc/profile -#TEMPLATES="/usr/share/templates" -TESTFILE="$TEMPLATES/audio/space_battle_A.wav" -OSSinstalled="false" - -function testaudio () { - -ossplay -d$AUDIODEVICE $TESTFILE - -} - -function load_alsa() { - - remove_service.sh alsa-utils -# cd /lib/modules/2.6.21-STB - KER=`uname -r` - cd /lib/modules/$KER/kernel/ - tar -xvf alsa-$KER.tar - pacman -Sf --noconfirm alsa-lib - - depmod -a - cd - - udevsettle - udevsettle - udevtrigger - - add_service.sh alsa-utils - sleep 4 - sv start alsa-utils -} - - -function unload_alsa () { -#kill $(lsof -t /dev/dsp* /dev/audio* /dev/mixer* /dev/snd/*) && modprobe -r $(lsmod |grep ^snd |awk '{print $1}') - sv stop alsa-utils - remove_service.sh alsa-utils - rm -rf /dev/adsp* - rm -rf /dev/snd/* - rm -rf /dev/audio - modprobe -r $(lsmod |grep ^snd |awk '{print $1}') -} - -function unload_oss { - sv stop oss - soundoff - rm -rf /dev/dsp* - rm -rf /dev/oss* - rm -rf /dev/sndstat - remove_service.sh oss -} - -function installOSS { - echo "installing oss" - add_service.sh oss - sleep 4 - sv start oss -} - - -function SYNCXINE { -echo "modify xine config file" - if [ -f /data/home/mythtv/.xine/config ] - then - cp -f /data/home/mythtv/.xine/config $TEMPLATES/xine.config - else - cp $TEMPLATES/xine.config.template $TEMPLATES/xine.config - fi - - if [ x$Audiotype = xOSS ] - then - DEVICENUMBER=`echo $SoundDevice|awk -F/ ' { print $3 } '|tr -d dsp ` - sed -e "s/^.*audio.driver.*$/audio.driver:oss/" \ - -e "s/^.audio.device.oss_device_name.*$/audio.device.oss_device_name:\/dev\/dsp/" \ - -e "s/^.audio.devic.oss_device_number.*$/audio.device.oss_device_number:$DEVICENUMER/" \ - -e "s/^.*audio.output.speaker_arrangement:.*$/Audio.output.speaker_arrangement:PassThrough/" \ - $TEMPLATES/xine.config > /data/home/mythtv/.xine/config - else - cp $TEMPLATES/xine.config /data/home/mythtv/.xine/config - fi - -} - -function SYNCMPLAYER { -echo "modify mplayer not implmented yet" -} - -function SYNCMYTHMUSIC { -echo "sync mythmusic" -$MV_ROOT/bin/restore_default_settings.sh -c MUSICMYTH -} - -function SYNCMYTHFRONTEND { -echo "sync mythfrontend" -$MV_ROOT/bin/restore_default_settings.sh -c MUSICFRONT -} - - -function checkOSSinstalled () { - ossinfo 1>/dev/null - resultcode=$? - echo $resultcode - if [ $resultcode = 0 ] - then - OSSinstalled='true' - else - OSSinstalled='false' - fi -} - -function sound_config_system { - - if [ x$syncXine = x1 ] - then - SYNCXINE - fi - if [ x$syncMplayer = x1 ] - then - SYNCMPLAYER - fi - if [ x$syncMythMusic = x1 ] - then - SYNCMYTHMUSIC - fi - if [ x$syncMythFrontend = x1 ] - then - SYNCMYTHFRONTEND - fi - -} - -function loadsound (){ - checkOSSinstalled - if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] - #then - # if [ $OSSinstalled = "false" ] - then - while [ $OSSinstalled = "false" ] - do - unload_alsa - rm /tmp/.alsatest - installOSS - installOSS - sleep 2 - checkOSSinstalled - done - # fi - else - touch /tmp/.alsatest - unload_oss - load_alsa - load_alsa - rm /tmp/.alsatest - - fi - -} - - - - -#####################MAIN PROGRAM########################## - -declare -r OPTSTRING="i:t:d:" - -if [ $# -eq 0 ] -then - echo "Valid options are:" - echo " -i (oss|alsa) oss or alsa subsystem " - echo " -t (test|real|LOAD) " - echo " -d device" - exit 1 -fi - - - - -while getopts "$OPTSTRING" SWITCH -do - case $SWITCH in - \?) echo "unkown option" - exit 11 ;; - i) echo "$SWITCH" "$OPTARG" - AUDIOTYPE="$OPTARG" - ;; - d) echo "$SWITCH" "$OPTARG" - AUDIODEVICE=$OPTARG - ;; - t) echo "$SWITCH" "$OPTARG" - SOUNDOPTYPE="$OPTARG" - if [ x"$OPTARG" = xtest ] - then - TEST=true - else - TEST=false - fi - - - ;; - - esac -done - - - - -case $SOUNDOPTYPE in - REAL|real ) - loadsound - sound_config_system - ;; - test|TEST) - echo $@ > /tmp/audio.test - #loadsound - if [ x$AUDIOTYPE = xOSS -o x$AUDIOTYPE = xoss ] - then - echo "testing OSS $AUDIODEVICE " - ossplay -d$AUDIODEVICE $TESTFILE - else - echo "testing ALSA $AUDIODEVICE " - aplay --device=$AUDIODEVICE $TESTFILE - fi - - ;; - - LOAD|load) - loadsound - ;; - esac - - -exit 0 - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/startx b/abs/core-testing/live-installer/startx deleted file mode 100755 index 0ffdf8c..0000000 --- a/abs/core-testing/live-installer/startx +++ /dev/null @@ -1,29 +0,0 @@ -#!/bin/bash -. /etc/profile - -export USER=root -export HOME=/root -#TEMPLATES=/usr/share/templates - -CMDLINE=$(cat /proc/cmdline) -TEMPVAR=${CMDLINE#*ip=} -IP=${TEMPVAR%% *} -echo $CMDLINE |grep -q vnc -USEVNC=$? - -if [ x$USEVNC = x1 ] -then - $MV_ROOT/bin/xconfig.sh - cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install - startx /root/live-install.sh -- -config /root/xorg.conf.install -allowMouseOpenFail - else - #VNC - pacman -Sf --noconfirm tightvnc - cd /root - mkdir .vnc - echo mythvantage |vncpasswd -f > /root/.vnc/passwd - chmod 500 /root/.vnc/passwd - rm /root/.vnc/xstartup - ln -s /root/live-install.sh /root/.vnc/xstartup - vncserver -fi diff --git a/abs/core-testing/live-installer/systemconfig.sh b/abs/core-testing/live-installer/systemconfig.sh deleted file mode 100755 index 845c67c..0000000 --- a/abs/core-testing/live-installer/systemconfig.sh +++ /dev/null @@ -1,1255 +0,0 @@ -#!/bin/bash -################################################################### -#Script to configure your system based off the values in /etc/systemconfig -#Any changes made to config files will be removed when systemconfig.sh is run -# -#JM -################################################################### -#set -x -. /etc/profile -#MVRELEASE=`cat /etc/mythvantage-release |cut -d" " -f -2` -MVRELEASE=`cat /etc/LinHES-release ` -echo $@ >/tmp/systemconfig.call -echo "----------------------start of systemconfig $@ ----------------------" -BASE="" - -#TEMPLATES="/usr/share/templates" -. /etc/profile -. $MV_ROOT/bin/networkconfig.sh -PACMAN="pacman --noconfirm" -postfix=`cat ${BASE}/usr/local/share/mythtv/.releasetype` -PKGBLACKLIST=$BASE/etc/blacklist.package - -if [ x$1 = x"Mysql_only" ] - then - rm -f /tmp/mysql.txt - sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt - exit 0 - fi - - -if [ -f /etc/systemconfig ] -then - . /etc/systemconfig -TEMPNET="Hostip"$default_interface -echo $TEMPNET -eval MYTHIP=\$${TEMPNET} -else - echo "could not find /etc/systemconfig" - exit 1 -fi - - - -#----------------------------------------------------- - - -function setupmysql { -#setup mysql.txt to find the database servers - if [ $SystemType = "Master_backend" ] - then - if [ $MYTHDHCP = 0 ] - then - #this grabs eth0, as that is all thats supported. -# dbhost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - dbhost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig - ##logic to change master_serverip and backend_serverip in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - else - - dbhost=$MYTHIP - sed -e "s/^dbhost=.*$/dbhost=\"$dbhost\"/" /etc/systemconfig >/tmp/systemconfig.old - cp /tmp/systemconfig.old ${BASE}/etc/systemconfig - #logic to change dbhost in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s master -a $dbhost - fi - fi - - if [ $SystemType = "Slave_backend" ] - then - if [ $MYTHDHCP = 0 ] - then - #this grabs eth0, as that is all thats supported. - #slavehost=`ifconfig | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'|head -n1` - slavehost=`ifconfig | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'` - ##logic to change backend_serverip in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost - else - slavehost=$MYTHIP - - #logic to change backend_serverif in db - ${BASE}${MV_ROOT}/bin/restore_default_settings.sh -c BECONFIG -s slave -a $slavehost - fi - fi - - MYSQLTXT=${BASE}/usr/local/share/mythtv/mysql.txt - if [ $SystemType = "Standalone" ] - then - sed -e "s/^DBHostName=.*$/DBHostName="localhost"/" $TEMPLATES/mysql.txt > $MYSQLTXT - else - sed -e "s/^DBHostName=.*$/DBHostName=$dbhost/" $TEMPLATES/mysql.txt > $MYSQLTXT - fi - rm ${BASE}/data/home/mythtv/.mythtv/mysql.txt - rm ${BASE}${MV_ROOT}/bin/mythtv/.mythtv/mysql.txt - if [ -f ${BASE}/data/home/mythtv/templates/mysql.txt ] - then - cp ${BASE}/data/home/mythtv/templates/mysql.txt $MYSQLTXT - fi - - chmod 755 $MYSQLTXT - chown mythtv $MYSQLTXT - -} - -function setupmysqlnetwork(){ -MFILE=etc/my.cnf -grep "#skip-networking" $BASE/$MFILE -status=$? - - - - if [ $SystemType = "Standalone" ] - then - sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE - if [ $status = 0 ] - then - sudo sv restart mysql - echo "restarting mysql with no network" - fi - - fi - - if [ $SystemType = "Master_backend" ] - then - sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE - if [ $status = 1 ] - then - sudo sv restart mysql - echo "restarting mysql with network" - fi - - fi - - -} - - -function settimezone { -#set the timezone -if [ x"$timezone" = x ] -then - timezone="unknown" -fi -rm ${BASE}/etc/localtime -echo $timezone -ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime - sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf - - # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock - # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock - # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock -cp $TEMPLATES/rc.conf /etc/rc.conf - -} - - -function setupreceiver { - case $ReceiverType in - tinker) echo "do nothing" - ;; - Serial) echo "setup serial lirc" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_serial #lirc" >> ${BASE}/etc/modules.mythvantage - /usr/bin/load-modules-mythvantage.sh - ;; - Usb-imon) echo "setup receiver-usb-imon" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage - /usr/bin/load-modules-mythvantage.sh - ;; - *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - ;; - esac - - -} - -function setupremote { - case $Remotetype in - no_remote) echo "No remote selected" - daemon_remove="lircd $daemon_remove" - ;; - tinker) echo "Remote in tinker mode" - ;; - *) echo "Setup remote" - mv ${BASE}/etc/lircd.conf ${BASE}/etc/lircd.conf.`date +%Y-%m-%d-%H-%M` - cd $TEMPLATES/remotes/$Remotetype - for i in lircd* - do - cat $i >> ${BASE}/etc/lircd.conf - done - cp lircrc ${BASE}/etc/lircrc - if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] - then - cat $TEMPLATES/LCD/$LCDtype/lircrc >> /etc/lircrc - cat $TEMPLATES/LCD/$LCDtype/lircd.conf >> /etc/lircd.conf - fi - if [ -f $TEMPLATES/transmit/$Blastertype/lircd.conf ] - then - cat $TEMPLATES/transmit/$Blastertype/lircd.conf >> ${BASE}/etc/lircd.conf - fi - chmod 755 /etc/lircrc - daemon_add="lircd $daemon_add" - sv hup lircd - ;; -esac - -} - -function setupblaster { - #cd $TEMPLATES/transmit/$Blastertype - #for i in lircd* - #do - # cat lircd.conf >> ${BASE}/etc/lircd.conf - #done - # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` - sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh - chmod 755 ${BASE}/usr/bin/change_chan.sh - #channel change script change - setupremote - -} - -function setupevrouter { - if [ x$UseEvrouter = x1 ] - then - case x$EvrouterConfig in - xtinker ) - echo "do nothing for evrouter" - ;; - x ) echo "empty evrouter" - ;; - * ) echo "setup evrouter for $EvrouterConfig " - cp $TEMPLATES/evrouter/$EvrouterConfig /etc/evrouter.cfg - daemon_add="evrouter Xvfb $daemon_remove" - - ;; - esac - else - # disable evrouter - daemon_remove="evrouter Xvfb $daemon_remove" - fi - - - - -} - -function setupLCD { - case x$LCDtype in - xtinker) echo "do nothing" - ;; - xno_lcd) echo "disabling lcd" - sv down lcdd - /usr/bin/load-modules-mythvantage.sh UNLOAD LCD - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - daemon_remove="lcdd $daemon_remove" - ;; - x) echo "empty lcd" ;; - - *) echo "setup lcd" - if [ -f $TEMPLATES/LCD/$LCDtype/modules ] - then - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage - #should also modprobe - fi - - - if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] - then - cp -f $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc - # install="lcdproc $install" - daemon_add="lcdd $daemon_add" - /usr/bin/load-modules-mythvantage.sh - RESTART_FE="true" - RESTART_LCD="true" - fi - #check if lirc capable,if so then call setupremote - if [ -f $TEMPLATES/LCD/$LCDtype/lircrc ] - then - setupremote - fi - ;; - esac - -} - - - -function scrubnfs { - cp /etc/fstab $TEMPLATES/fstab.conf.template - grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab - } - -function setupfstab () { -# setupfstab $NFSserver $NFSshare $NFSmount - echo "$1 $2 nfs" >> ${BASE}/etc/fstab - if [ ! -e "$2" ] - then - mkdir -p "$2" - chown mythtv:mythtv "$2" - fi - if [ x$DCONFIG = x ] - then - mount $2 & - fi - -} - -function setupncidclient -{ - sed -e "s/^set Host.*$/set Host $dbhost /" $TEMPLATES/ncid.conf.template >${BASE}/etc/ncid/ncid.conf -} - -function setupnciddaemon { - cp -f /etc/ncid/ncidd.conf $TEMPLATES/ncidd.conf.template - sed -e "s/.*set ttyport.*$/set ttyport = \/dev\/$nciddSerialPort /" $TEMPLATES/ncidd.conf.template >${BASE}/etc/ncid/ncidd.conf - -} - -function setupntp () { -cat > ${BASE}/etc/ntp.conf << EOF -# default restrictions -restrict default noquery notrust nomodify -# NTP drift file - used to keep track of your system clocks -# time deviation -driftfile /etc/ntp.drift - -# NTP log file -logfile /var/log/ntp.log -# override the default restrictions here, servers that can query -restrict 192.168.0.0 mask 255.255.0.0 nomodify -restrict 10.0.0.0 mask 255.0.00 nomodify - -#servers to sync with -EOF - #this is used for backend or standlone types - if [ $1 = "1" ] - then - echo "server ntp1.cs.wisc.edu" >> ${BASE}/etc/ntp.conf - echo "server ntp3.sf-bay.org" >> ${BASE}/etc/ntp.conf - echo "restrict ntp1.cs.wisc.edu noquery nomodify" >> ${BASE}/etc/ntp.conf - echo "restrict ntp3.sf-bay.org noquery nomodify" >> ${BASE}/etc/ntp.conf - - else - echo "server $dbhost" >> ${BASE}/etc/ntp.conf - echo "restrict $dbhost noquery nomodify" >> ${BASE}/etc/ntp.conf - fi - - -} - -function setupplugins (){ - -pkglistinstall="" -pkglistremove="" -#default enabled -for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo -do -eval pkgvalue=\$${i} - -if [ x$pkgvalue = x ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - if [ x$pkgvalue = x1 ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - pkglistremove="$pkglistremove $i$postfix" - fi - fi - - - -done - - - -#default disabled - for i in mythphone mytharchive mythbrowser mythnews mythgame mythflix mythweather - do -eval pkgvalue=\$${i} - -if [ x$pkgvalue = x ] - then - pkglistremove="$pkglistremove $i$postfix" - else - if [ x$pkgvalue = x1 ] - then - pkglistinstall="$pkglistinstall $i$postfix" - else - pkglistremove="$pkglistremove $i$postfix" - fi - fi - done -install="$pkglistinstall $install" -remove="$pkglistremove $remove" - -} -function LCDcheck () { - case x$LCDtype in - xtinker) echo "do nothing lcd " - ;; - xno_lcd) echo "no lcd " - ;; - xxosd) install="xosd lcdproc $install" - ;; - x) echo "lcd empty " - ;; - *) - install="lcdproc $install" - ;; -esac -} - - -function packages () { -#see which plugins need to be installed -echo " Starting to install Packages" -setupplugins -LCDcheck -if [ ! -f $PKGBLACKLIST ] -then - touch $PKGBLACKLIST -fi - for i in $remove - do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] - then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` - if [ $? = 0 ] - then - if [ $i = "mythweb$postfix" ] - then - pacman --noconfirm -R mythweb$postfix - echo removed $i - else - pacman --noconfirm -Rs $i - echo removed $i - fi - fi - else - echo "$i is black listed" - fi - done - # fi - - for i in $install - do - echo "-----------$i --------------" - grep -q $i $PKGBLACKLIST - if [ $? = 1 ] - then - pacman -Q $i 2>/dev/null - #VAR=`pacman -Q $i 2>&1 ` - # echo $VAR |grep -vq error: - - if [ ! $? = 0 ] - then - pacman --noconfirm -Sf $i - echo installed $i - else - echo "$i already installed" - fi - else - echo "$i is black listed" - fi - done -} - -function daemons { -echo "Daemons on boot" - - for i in $daemon_remove - do - sv check $i 1>/dev/null - status=$? - if [ $status -eq 0 ] - then - sv down $i - fi - remove_service.sh $i - done - - - for i in $daemon_add - do - sv check $i 1>/dev/null - status=$? - add_service.sh $i - - if [ $status -eq 0 ] - then - case $i in - mysql*) sv hup $i - ;; - mythback*) sv hup $i - ;; - lirc* ) sv hup $i - ;; - frontend) sv check frontend 1>/dev/null - ;; - - smbd ) sv hup $i - ;; - nmbd ) sv hup $i - ;; - evrouter) sv restart $i - ;; - *) sv down $i - sleep 1 - sv up $i - ;; - esac - fi - - done - -} - - -function services -{ -ser_install="" -ser_daemon_add="" -ser_remove="" -ser_daemon_remove="" -if [ x$UseEvrouter = x1 ] -then - ser_daemon_add="evrouter Xvfb $ser_daemon_add" -else - ser_daemon_remove="evrouter Xvfb $ser_remove" -fi - -if [ x$RunDHCP = x1 ] -then - ser_daemon_add="dnsmasq $ser_daemon_add" - ser_install="dnsmasq mvpmc $ser_install" - -else - ser_daemon_remove="dnsmasq $ser_daemon_remove" - ser_remove="dnsmasq mvpmc $ser_remove" -fi - -if [ x$RunFrontend = x1 ] -then - ser_daemon_add="frontend hal $ser_daemon_add" - ser_install=" $ser_install" - showX=true - else - ser_daemon_remove="frontend hal $ser_daemon_remove" - ser_remove="$ser_remove" - fi - -if [ x$UseMythWEB = x1 ] -then - ser_install="lighttpd mythweb$postfix $ser_install" - ser_daemon_add="lighttpd $ser_daemon_add" - else - ser_remove="mythweb$postfix $ser_remove" - ser_daemon_remove="$ser_daemon_remove" - fi - -#samba -if [ x$UseSamba = x1 ] -then - ser_install="samba $ser_install" - ser_daemon_add="nmbd smbd $ser_daemon_add " - if [ x$Samba_mediareadonly = x1 ] - then - smreadonly="no" - else - smreadonly="yes" - fi - - if [ x$Samba_homereadonly = x1 ] - then - shreadonly="no" - else - shreadonly="yes" - fi - - if [ ! -d ${BASE}/etc/samba ] - then - mkdir ${BASE}/etc/samba - fi - - if [ -f ${BASE}/data/home/mythtv/templates/smb.conf ] - then - install -D -m755 ${BASE}/data/home/mythtv/templates/smb.conf ${BASE}/etc/samba/smb.conf - else - sed -e "s/^.*workgroup =.*$/ workgroup = $Samba_domain/g " \ - -e "s/^.*server string = .*$/ server string = $hostname/g" $TEMPLATES/samba/smb.conf.template > ${BASE}/etc/samba/smb.conf - - if [ x$Samba_media = "x1" ] - then - echo "include = /etc/samba/smb.conf.media" >> ${BASE}/etc/samba/smb.conf - sed -e "s/^.*writeable.*$/writeable = $smreadonly/g" $TEMPLATES/samba/smb.conf.media > ${BASE}/etc/samba/smb.conf.media - fi - - if [ x$Samba_home = "x1" ] - then - echo "include = /etc/samba/smb.conf.home" >> ${BASE}/etc/samba/smb.conf - sed -e "s/^.*writeable.*$/writeable = $shreadonly/g" $TEMPLATES/samba/smb.conf.home > ${BASE}/etc/samba/smb.conf.home - - fi - - fi -else - ser_remove="samba $ser_remove" - ser_install="smbclient $ser_install" - ser_daemon_remove="smbd nmbd $ser_daemon_remove" -fi - - -if [ x$UseNFS = x1 ] -then - ser_install="nfs-utils portmap $ser_install" - ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" - sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports - -else - ser_remove="$ser_remove" - ser_daemon_remove="nfsd nfslock $ser_daemon_remove" -fi - -if [ x$Runncidd = x1 ] -then - ser_daemon_add="ncidd ncid $ser_daemon_add" - ser_install="ncid $ser_install" - else - ser_daemon_remove="ncidd ncid $ser_daemon_remove" - ser_remove="ncid $ser_remove" - fi - -#Setting the default, just to avoid the or statement.. -if [ x$UseHobbit = x ] -then - UseHobbit=0 -fi - -if [ x$UseHobbit = x1 ] -then - case $SystemType in - Standalone|Master_backend ) - ser_daemon_add="hobbit $ser_daemon_add" - ser_install="hobbitserver $ser_install" - ;; - - *) ser_daemon_add="hobbit-client $ser_daemon_add" - ser_install="hobbit-client $ser_install" - ;; - esac -else - ser_daemon_remove="hobbit hobbit-client $ser_daemon_remove" - ser_remove="hobbit-client hobbitserver $ser_remove" - rm -f /data/srv/httpd/htdocs/hobbit/index.html - - fi - - - -} - - - -function setupsleep { -if [ x$AutoShutdown = x1 ] -then - cronshutdowntime="" - if [ x$Shutdowntime != x-1 ] - then - cronshutdowntime=$Shutdowntime - fi - if [ x$Shutdowntime2 != x-1 ] - then - if [ x$cronshutdowntime = x ] - then - cronshutdowntime=$Shutdowntime2 - else - cronshutdowntime="${cronshutdowntime},${Shutdowntime2}" - fi - fi - - sed -e "s/HOUR/$cronshutdowntime/g" $TEMPLATES/cron.template | crontab - -u mythtv -else - sed -e "/00 HOUR.*/d" $TEMPLATES/cron.template | crontab - -u mythtv -fi - -} - - -function setuppacman () { -#setup link to httpd dir -echo "Configuring pacman" - if [ ! x$1 = x ] - then - ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo - echo "creating the link for the pacman repo mirror" - fi - - for i in mv-core mv-core-testing mv-extra mv-extra-testing - do - echo "[$i]" > ${BASE}/etc/pacman.d/$i - #add mirror if needed - if [ x$PKG_MIRROR = x1 ] - then - echo " Server = http://$dbhost/repo/$i " >> ${BASE}/etc/pacman.d/$i - fi - #add user templates - USERTEMPLATES="/data/home/mythtv/templates" - if [ -f $USERTEMPLATES/sources/$i ] - then - echo "Adding user $i" - cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i - fi - cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i - echo "setting local mirror to $dbhost for $i " - done - - #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg - - -} - - -function setupzipcode () { - if [ ! x$zipcode = x ] - then - ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode - fi -} - -function process_nfsmap () { -#first look for a local copy of nfsmap -if [ $1 = noip ] -then - if [ -f /data/home/mythtv/templates/nfsmap ] - then - NFSMAP="/data/home/mythtv/templates/nfsmap" - else - mv -f /tmp/nfsmap /tmp/nfsmap.old - wget -O /tmp/nfsmap http://$dbhost:1337/templates/nfsmap - if [ $? = 0 ] - then - NFSMAP="/tmp/nfsmap" - fi - fi -else - mv -f /tmp/nfsmap /tmp/nfsmap.old - wget -O /tmp/nfsmap http://$1:1337/templates/nfsmap - if [ $? = 0 ] - then - NFSMAP="/tmp/nfsmap" - fi -fi - - if [ -f $NFSMAP ] - then - #read in file - while read line - do - NFSserver=`echo "$line"|cut -d" " -f1` - NFSmount=`echo "$line"|cut -d" " -f2` - setupfstab $NFSserver $NFSmount - done <$NFSMAP - else - echo "couldn't find nfsmap" - - fi -} - -function setupcnfs () { - scrubnfs - if [ $HaveCentralNFS = "yes" ] - then - case x$NFSserver in - xfile:nfsmap ) - process_nfsmap noip - ;; - *:nfsmap ) - nfsmapip=`echo "$NFSserver" | cut -d: -f1 ` - process_nfsmap $nfsmapip - ;; - *) setupfstab $NFSserver $NFSmount - esac - - #if [ ! x"$NFSserver" = "xfile:nfsmap" ] - #then - # setupfstab $NFSserver $NFSmount - #else - # process_nfsmap - #fi - else - echo "fe_nfs" - #if no central nfs found, then use the mbe. - if [ $SystemType = "Frontend_only" ] - then - setupfstab ${dbhost}:/data/media /data/media - fi - fi - -} - -function setupbootsplash () { - -if [ x$Usebootsplash = x1 ] -then - COMMAND="%s/^default.*0/default 1/g" -else - COMMAND="%s/^default.*1/default 0/g" -fi - -ex ${BASE}/boot/grub/menu.lst < ${BASE}/etc/resolv.conf - echo "nameserver 127.0.0.1" >> ${BASE}/etc/resolv.conf - echo "nameserver $nameserver" >> ${BASE}/etc/resolv.conf -fi - -#setup dongle.config -COMMAND="%s/mvpmc -f .*/mvpmc -f \/etc\/helvR10.fon -s ${ip} \& /" -ex ${BASE}/data/srv/tftp/dongle.bin.config < /etc/os_myth_release -echo "systemtype=$smoltsystem" > /data/home/mythtv/.mythtv/smolt.info -echo "remote=$Remotetype" >> /data/home/mythtv/.mythtv/smolt.info - diff --git a/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf deleted file mode 100644 index d49fbf6..0000000 --- a/abs/core-testing/live-installer/templates/LCD/Shuttle-SG33/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=shuttleVFD -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core-testing/live-installer/templates/LCD/Silverstone/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/live-installer/templates/LCD/Silverstone/modules b/abs/core-testing/live-installer/templates/LCD/Silverstone/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core-testing/live-installer/templates/LCD/Silverstone/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf deleted file mode 100644 index 2596c25..0000000 --- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/LCDd.conf +++ /dev/null @@ -1,869 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, EyeboxOne, -# g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, irman, -# joy, lb216,lcdm001, lcterm, lirc,MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, pyramid, sed1330, sed1520, serialVFD, -# sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=imon -#Driver=curses - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -#ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 -# Set the initial off-brightness [default: 0; legal: 0 - 255] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073 ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -# NOTE: The driver will ignore this if the display is a vfd or vkd -# as they crash if the backlight is turned off -Backlight=yes - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=800 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# The following table translates from MtxOrb key letters to logical key namess. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446) -# Note: G321D is the only one that is tested currently. -Type=G321D - - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use -Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-* - -# EOF diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf deleted file mode 100644 index ce64936..0000000 --- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircd.conf +++ /dev/null @@ -1,38 +0,0 @@ - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.8.1(default) on Thu Sep 6 09:06:50 2007 -# -# contributed by -# -# brand: /tmp/out -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name Antec_fusion_silver_v1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - post_data_bits 16 - post_data 0xFF - gap 131985 - min_repeat 6 - toggle_bit 0 - - - begin codes - CW 0x0001 - CCW 0x0100 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc b/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc deleted file mode 100644 index 7a39704..0000000 --- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/lircrc +++ /dev/null @@ -1,15 +0,0 @@ -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CW - repeat = 1 - config = ] -end - -begin - remote = Antec_fusion_silver_v1 - prog = mythtv - button = CCW - repeat = 1 - config = [ -end diff --git a/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules b/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules deleted file mode 100644 index cd576c3..0000000 --- a/abs/core-testing/live-installer/templates/LCD/antec_fusion/modules +++ /dev/null @@ -1 +0,0 @@ -lirc_imon #LCD diff --git a/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf b/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf deleted file mode 100644 index 5b37bd7..0000000 --- a/abs/core-testing/live-installer/templates/LCD/xosd/LCDd.conf +++ /dev/null @@ -1,957 +0,0 @@ -# LCDd.conf -- configuration file for the LCDproc server daemon LCDd -# -# This file contains the configuration for the LCDd server. -# -# The format is ini-file-like. It is divided into sections that start at -# markers that look like [section]. Comments are all line-based comments, -# and are lines that start with '#' or ';'. -# -# The server has a 'central' section named [server]. For the menu there is -# a section called [menu]. Further each driver has a section which -# defines how the driver acts. -# -# The drivers are activated by specifiying them in a driver= line in the -# server section, like: -# -# Driver=curses -# -# This tells LCDd to use the curses driver. -# The first driver that is loaded and is capable of output defines the -# size of the display. The default driver to use is curses. -# If the driver is specified using the -d command line option, -# the Driver= options in the config file are ignored. -# -# The drivers read their own options from the respective sections. - - - -## Server section with all kinds of settings for the LCDd server ## -[server] - -# Tells the server to load the given drivers. Multiple lines can be given. -# The name of the driver is case sensitive and determines the section -# where to look for further configuration options of the specific driver -# as well as the name of the dynamic driver module to load at runtime. -# The latter one can be changed by giving af File= directive in the -# driver specific section. -# -# The following drivers are supported: -# bayrad, CFontz, CFontz633, CFontzPacket, curses, CwLnx, ea65, -# EyeboxOne, g15, glcdlib, glk, hd44780, icp_a106, imon, IOWarrior, -# irman, joy, lb216, lcdm001, lcterm, lirc, MD8800, ms6931, mtc_s16209x, -# MtxOrb, NoritakeVFD, picolcd, pyramid, sed1330, sed1520, serialPOS, -# serialVFD, sli, stv5730, svga, t6963, text, tyan, ula200, xosd -Driver=xosd - -# Tells the driver to bind to the given interface -Bind=127.0.0.1 - -# Listen on this specified port; defaults to 13666. -Port=13666 - -# Sets the reporting level; defaults to 2 (warnings and errors only). -ReportLevel=3 - -# Should we report to syslog instead of stderr ? Default: no -#ReportToSyslog=yes - -# Sets the default time in seconds to displays a screen. -WaitTime=5 - -# User to run as. LCDd will drop its root priviledges, -# if any, and run as this user instead. -User=nobody - -# If yes, the the serverscreen will be rotated as a usual info screen. If no, -# it will be a background screen, only visible when no other screens are -# active. -#ServerScreen=no - -# The server will stay in the foreground if set to true. -#Foreground=no - -# Where can we find the driver modules ? -# IMPORTANT: Make sure to change this setting to reflect your -# specific setup! Otherwise LCDd won't be able to find -# the driver modules and will thus not be able to -# function properly. -# NOTE: Always place a slash as last character ! -DriverPath=/usr/lib/lcdproc/ - -# GoodBye message: each entry represents a display line; default: builtin -#GoodBye="Thanks for using" -#GoodBye=" LCDproc!" - -# The "...Key=" lines define what the server does with keypresses that -# don't go to any client. -# These are the defaults: -ToggleRotateKey=Enter -PrevScreenKey=Left -NextScreenKey=Right -#ScrollUpKey=Up -#ScrollDownKey=Down - -# If you have only 4 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up -#NextScreenKey=Down - -# If you have only 3 keys, you can choose to use this: -#ToggleRotateKey=Enter -#PrevScreenKey=Up - - - -## The menu section. The menu is an internal LCDproc client. ## -[menu] -# You can configure what keys the menu should use. Note that the MenuKey -# will be reserved exclusively, the others work in shared mode. - -# The following works excellent with 4 keys or more. -MenuKey=Escape -EnterKey=Enter -UpKey=Up -DownKey=Down -# If you have 6 keys you may define these as well -#LeftKey=Left -#RightKey=Right - -# If you have only 3 keys, you could use something like this: -#MenuKey=Escape -#EnterKey=Enter -#DownKey=Down - - - -### Driver sections are below this line, in alphabetical order ### - - -## EMAC BayRAD driver ## -[bayrad] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200] -Speed=9600 - - - -## CrystalFontz driver (for CF632 & CF634) ## -[CFontz] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD size [default: 20x4] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200 or 115200] -Speed=9600 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - - - -## CrystalFontz633 driver (for CF633 only) ## -[CFontz633] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 -# Select the LCD type (size) [default: 16x2] -Size=16x2 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=19200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## CrystalFontz packet driver (for CF631, CF633 & CF635) ## -[CFontzPacket] - -# Select the LCD model [default: 633; legal: 631, 633, 635] -Model=635 -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 -# Select the LCD size [default: depending on model: 635: 20x4, 631: 20x2, 633: 16x2] -Size=20x4 -# Set the initial contrast [default: 560; legal: 0 - 1000] -Contrast=350 -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 -# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=115200 -# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no] -# Currently this flag is not in use, there is no such thing as NewFirmware. ;=) -#NewFirmware=no -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# I want to reboot the LCD to make sure we start from a known state -Reboot=yes - - - -## Curses driver ## -[curses] - -# color settings -# foreground color [default: blue] -Foreground=blue -# background color when "backlight" is off [default: cyan] -Background=cyan -# background color when "backlight" is on [default: red] -Backlight=red - -# display size [default: 20x4] -Size=20x4 - -# What position (X,Y) to start the left top corner at... -# Default: (7,7) -TopLeftX=7 -TopLeftY=7 - -# use ASC symbols for icons & bars [default: no; legal, yes, no] -UseACS=no - - - -## Cwlinux driver ## -[CwLnx] - -# Select the LCD model [default: 12232; legal: 12232, 1602] -Model=12232 - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyUSB0 - -# Select the LCD size [default: depending on model: 12232: 20x4, 1602: 16x2] -Size=20x4 - -# Set the communication speed [default: 19200; legal: 9600, 19200] -Speed=19200 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -# normally you shouldn't need this -Reboot=no - -# If you have a keypad connected. Keypad layout is currently not -# configureable from the config file. -Keypad=yes - -# If you have a non-standard keypad you can associate any keystrings to keys. -# There are 6 input keys in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following is the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - -# keypad_test_mode permits to test keypad assignement -# Default value is no -#keypad_test_mode=yes - - - -## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ## -[ea65] - -# Device is fixed /dev/ttyS1 -# Width and Height are fixed 9x1 - -# As the VFD is self luminescent we don't have a backlight -# But we can use the backlight functions to control the front LEDs -# Brightness 0 to 299 -> LEDs off -# Brightness 300 to 699 -> LEDs half bright -# Brightness 700 to 1000 -> LEDs full bright -Brightness=500 -# OffBrightness is the the value used for the 'backlight off' state -OffBrightness=0 - - - -## EyeboxOne driver ## -[EyeboxOne] - -# Select the output device to use [default: /dev/ttyS1] -#Device=/dev/cua01 -Device=/dev/ttyS1 - -# Set the display size [default: 20x4] -Size=20x4 - -# Switch on the backlight? [default: yes] -Backlight=yes - -# Switch on the cursor? [default: no] -Cursor=no - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# Enter Key is a \r character, so it's hardcoded in the driver -LeftKey=D -RightKey=C -UpKey=A -DownKey=B -EscapeKey=P - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## g15 driver for Logitech G15 Keyboard LCDs ## -[g15] - -# Display size (currently unused) -size=20x5 - -## glcdlib meta driver for graphical LCDs ## -[glcdlib] - -## mandatory: - -# which graphical display supported by graphlcd-base to use [default: image] -# (see /etc/graphlcd.conf for possible drivers) -Driver=noritake800 - -# no=use graphlcd bitmap fonts (they have only one size / font file) -# yes=use fonts supported by FreeType2 (needs Freetype2 support in libglcdprocdriver and its dependants) -UseFT2=yes - -# text resolution in fixed width characters [default: 16x4] -# (if it won't fit according to available physical pixel resolutioni -# and the minimum available font face size in pixels, then -# 'DebugBorder' will automatically be turned on) -TextResolution=20x4 - -# path to font file to use -FontFile=/usr/share/fonts/corefonts/courbd.ttf - -## these only apply if UseFT2=yes: - -# character encoding to use -CharEncoding=iso8859-2 - -# minumum size in pixels in which fonts should be rendered -MinFontFaceSize=7x12 - -## optional: -Brightness=50 # Brightness (in %) if applicable -Contrast=50 # Contrast (in %) if applicable -Backlight=no # Backlight if applicable -UpsideDown=no # flip image upside down -Invert=no # invert light/dark pixels -ShowDebugFrame=no # turns on/off 1 pixel thick debugging - # border whithin the usable text area, - # for setting up TextResolution and - # MinFontFaceSize (if using FT2); -ShowBigBorder=no # border around the unused area -ShowThinBorder=yes # border around the unused area -PixelShiftX=0 -PixelShiftY=2 - - - -## Matrix Orbital GLK driver ## -[glk] - -# select the serial device to use [default: /dev/lcd] -Device=/dev/lcd - -# set the initial contrast value [default: 560; legal: 0 - 1000] -Contrast=560 - -# set the serial port speed [default: 19200; legal: 9600, 19200, 38400] -Speed=19200 - - - -## Hitachi HD44780 driver ## -[hd44780] - -# Select what type of connection. See documentation for types. -ConnectionType=4bit - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device of the serial interface (default is /dev/lcd) -Device=/dev/ttyS0 - -# Bitrate of the serial port (0 for interface default) -Speed=0 - -# If you have a keypad connected. -# You may also need to configure the keypad layout further on in this file. -Keypad=no - -# set the initial contrast (for bwctusb only) [default: 0; legal: 0 - 1000] -Contrast=0 - -# If you have a switchable backlight. -Backlight=no - -# If you have the additional output port ("bargraph") and you want to -# be able to control it with the lcdproc OUTPUT command -OutputPort=no - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - -# Specifies the size of the LCD. -# In case of multiple combined displays, this should be the total size. -Size=20x4 - -# For multiple combined displays: how many lines does each display have. -# Vspan=2,2 means both displays have 2 lines. -#vspan=2,2 - -# If you have an HD66712, a KS0073 or an other 'almost HD44780-compatible', -# set this flag to get into extended mode (4-line linear). -# This flag is NOT the old obsolete Extended option. -#ExtendedMode=yes - -# Character map to to map ISO-8859-1 to the LCD's character set -# [default: hd44780_default; legal: hd44780_default, ea_ks0073, sed1278f_0b ] -Charmap=hd44780_default - -# If your display is slow and cannot keep up with the flow of data from -# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4 -# to increase the delays. Default: 1. -#DelayMult=2 - -# Some displays (e.g. vdr-wakeup) need a message from the driver to that it -# is still alive. When set to a value bigger then null the character in the -# upper left corner is updated every seconds. Default: 0. -#KeepAliveDisplay=0 - -# If you experience occasional garbage on your display you can use this -# option as workaround. If set to a value bigger than null it forces a -# full screen refresh seconds. Default: 0. -#RefreshDisplay=5 - -# You can reduce the inserted delays by setting this to false. -# On fast PCs it is possible your LCD does not respond correctly. -# Default: true. -DelayBus=true - -# If you have a keypad you can assign keystrings to the keys. -# See documentation for used terms and how to wire it. -# For example to give directly connected key 4 the string "Enter", use: -# KeyDirect_4=Enter -# For matrix keys use the X and Y coordinates of the key: -# KeyMatrix_1_3=Enter -KeyMatrix_4_1=Enter -KeyMatrix_4_2=Up -KeyMatrix_4_3=Down -KeyMatrix_4_4=Escape - - - -## ICP A106 driver ## -[icp_a106] -Device=/dev/ttyS1 - - - -## Code Mercenaries IO-Warrior driver ## -[IOWarrior] - -# display dimensions -Size=20x4 - -# serial number [exactly as listed by usbview] -# (if not given, the 1st IOWarrior found gets used) -#SerialNumber=00000674 - -# Specifies if the last line is pixel addressable or it controls an -# underline effect. [default: true (= pixel addressable); legal: yes, no] -#Lastline=true - - - -## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ## -[imon] - -# select the device to use -Device=/dev/lcd0 - -# display dimensions -Size=16x2 - - - -## IrMan driver ## -[IrMan] -#if in trouble with IrMan, try Lirc emulator for IrMan - -# Select the input device to use -#Device=/dev/irman - -# Select the configuration file to use -#Config=/etc/irman.cfg - - - -## Joystick driver ## -[joy] - -# Select the input device to use [default: /dev/js0] -Device=/dev/js0 - -# set the axis map -Map_Axis1neg=Left -Map_Axis1pos=Right -Map_Axis2neg=Up -Map_Axis2pos=Down - -# set the button map -Map_Button1=Enter -Map_Button2=Escape - - - -## LB216 driver ## -[lb216] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Set the communication speed [default: 9600; legal: 2400, 9600] -Speed=9600 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## LCDM001 driver ## -[lcdm001] - -Device=/dev/ttyS1 - -# keypad settings -# Keyname Function -# Normal context Menu context -# ------- -------------- ------------ -# PauseKey Pause/Continue Enter/select -# BackKey Back(Go to previous screen) Up/Left -# ForwardKey Forward(Go to next screen) Down/Right -# MainMenuKey Open main menu Exit/Cancel -PauseKey=LeftKey -BackKey=UpKey -ForwardKey=DownKey -MainMenuKey=RightKey - -# You can rearrange the settings here. -# If your device is broken, have a look at /usr/lib/lcdproc/lcdm001.h - - - -## HNE LCTerm driver ## -[lcterm] -Device=/dev/ttyS1 -Size=16x2 - - - -## LIRC input driver ## -[lirc] - -# Specify an alternative location of the lircrc file [default: ~/.lircrc] -#lircrc=/etc/lircrc.lcdproc - -# Must be the same as in your lircrc -#prog=lcdd - - - -##The driver for the VFD of the Medion MD8800 PC ## -[MD8800] -# device to use [default: /dev/ttyS1] -#Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=50 - - - -## MSI MS-6931 driver for displays in 1HU servers ## -[ms6931] - -# device to use [default: /dev/ttyS1] -Device=/dev/ttyS1 - -# display size [default: 16x2] -#Size=16x2 - - - -## MTC-S16209x driver ## -[mtc_s16209x] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the initial brightness [default: 255; legal: 0 - 255] -Brightness=255 - -# Reinitialize the LCD's BIOS [default: no; legal: yes, no] -Reboot=no - - - -## Matrix Orbital driver ## -[MtxOrb] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/ttyS0 - -# Set the display size [default: 20x4] -Size=20x4 - -# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd] -Type=lkd - -# Set the initial contrast [default: 480] -# NOTE: The driver will ignore this if the display -# is a vfd or vkd as they don't have this feature -Contrast=480 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=0 - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200] -Speed=19200 - -# The following table translates from MtxOrb key letters to logical key names. -# By default no keys are mapped, meaning the keypad is not used at all. -#KeyMap_A=Left -#KeyMap_B=Right -#KeyMap_C=Up -#KeyMap_D=Down -#KeyMap_E=Enter -#KeyMap_F=Escape -# See the [menu] section for an explanation of the key mappings - -# You can find out which key of your display sends which -# character by setting keypad_test_mode to yes and running -# LCDd. LCDd will output all characters it receives. -# Afterwards you can modify the settings above and set -# keypad_set_mode to no again. -keypad_test_mode=no - - - -## Noritake VFD driver ## -[NoritakeVFD] -# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1 [default: /dev/lcd] -Device=/dev/ttyS0 - -# Specifies the size of the LCD. -Size=20x4 - -# set the brightness -Brightness=255 - -# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# re-initialize VFD ? -#Reboot=yes - - - -## Mini-box.com picoLCD (usblcd) driver ## -[picolcd] -# This is for the Mini-Box.com usblcd device that ships with the M300. It can -# also be purchased separately but this driver has only been tested on the M300 -# setup. - -# KeyTimeout is the time that LCDd spends waiting for a key press before cycling -# through other duties. Higher values make LCDd use less CPU time and make -# key presses more detectable. Lower values make LCDd more responsive but a -# little prone to missing key presses. 500 (.5 second) is the default and a -# balanced value. -KeyTimeout=500 - -# Contrast: [default: 1000; legal: 0 - 1000] -Contrast=1000 - -# Light the keys? i[default: on; legal: on, off] -Keylights=on - -# If Keylights is on, the you can unlight specific keys below: -# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys. -# There is no LED for the +/- keys. This is a handy way to indicate to users -# which keys are disabled. [default: on; legal: on, off] -Key0Light=on -Key1Light=on -Key2Light=on -Key3Light=on -Key4Light=on -Key5Light=on - - - -## Pyramid LCD driver ## -[pyramid] - -# device to connect to [default: /dev/lcd] -Device=/dev/ttyUSB0 - - - -## Seiko Epson 1330 driver ## -[sed1330] - -# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002) -# Note: Currently only tested with G321D & SP14Q002. -Type=G321D - -# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10] -CellSize=6x10 - -# Select what type of connection [legal: classic, bitshaker; default: classic] -ConnectionType=classic - - -## Seiko Epson 1520 driver ## -[sed1520] - -# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - - - -## serial POS display driver ## -[serialPOS] - -# Device to use in serial modea [default: /dev/lcd] -Device=/dev/lcd - -# Specifies the size of the display in characters. [default: 16x2] -Size=16x2 - -# Set the communication protocol to use with the POS display. -# [default: AEDEX; legal: IEE, Epson, Emax, IBM, LogicControls, Ultimate] -Type=AEDEX - -# communication baud rate with the display [default: 9600; legal: 1200, 2400, 19200, 115200] -Speed=9600 - - - -## Serial VFD driver ## -## Drives various (see below) serial 5x7dot VFD's. ## -[serialVFD] - -# Specifies the displaytype.[default: 0] -# 0 NEC (FIPC8367 based) VFDs. -# 1 KD Rev 2.1. -# 2 Noritake VFDs (*). -# 3 Futaba VFDs -# (* most should work, not testet yet.) -Type=0 - -# "no" if display connected serial, "yes" if connected parallel. [default: no(=serial)] -use_parallel=no - -# Number of Custom-Characters [default: displaytype dependent] -#Custom-Characters=0 - -# Portaddress where the LPT is. Used in parallelmode only. Usual values are 0x278, 0x378 and 0x3BC -Port=0x378 - -# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1 -Device=/dev/ttyS1 - -# Specifies the size of the VFD. -Size=20x2 - -# Set the initial brightness [default: 1000; legal: 0 - 1000] -# (4 steps 0-250, 251-500, 501-750, 751-1000) -Brightness=1000 -# Set the initial off-brightness [default: 0; legal: 0 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -# (4 steps 0-250, 251-500, 501-750, 751-1000) -OffBrightness=0 - -# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200] -Speed=9600 - -# enable ISO 8859 1 compatibility [default: yes; legal: yes, no] -#ISO_8859_1=yes - - - -## stv5730 driver ## -[stv5730] - -# Port the device is connected to [default: 0x378] -Port=0x378 - - - -## SVGAlib driver ## -[svga] - -# svgalib mode to use [default: G320x240x256; legal: supported svgalib modes] -#Mode=G640x480x256 - -# set display size [default: 20x4] -Size=20x4 - -# Set the initial contrast [default: 500; legal: 0 - 1000] -# Can be set but does not change anything internally -Contrast=500 - -# Set the initial brightness [default: 1000; legal: 1 - 1000] -Brightness=1000 - -# Set the initial off-brightness [default: 500; legal: 1 - 1000] -# This value is used when the display is normally -# switched off in case LCDd is inactive -OffBrightness=500 - - - -## Text driver ## -[text] -# Set the display size [default: 20x4] -Size=20x4 - - - -## Toshiba T6963 driver ## -[t6963] - -# set display size [default: 20x6] -Size=20x6 - -# port to use [default: 0x378; legal: 0x200 - 0x400] -Port=0x378 - -# Is ECP mode on? [default: yes; legal: yes, no] -#ECPlpt=yes - -# Use graphics? [default: no; legal: yes, no] -#graphic=no - - - -## Tyan Barebones LCD driver (GS10 & GS12 series) ## -[tyan] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 9600; legal: 4800, 9600] -Speed=9600 - -# set display size [default: 16x2] -Size=16x2 - - - -## ELV ula200 driver ## -[ula200] - -# Select the LCD size [default: 20x4] -Size=20x4 - -# If you have a non standard keypad you can associate any keystrings to keys. -# There are 6 input key in the CwLnx hardware that generate characters -# from 'A' to 'F'. -# -# The following it the built-in default mapping hardcoded in the driver. -# You can leave those unchanged if you have a standard keypad. -# You can change it if you want to report other keystrings or have a non -# standard keypad. -# KeyMap_A=Up -# KeyMap_B=Down -# KeyMap_C=Left -# KeyMap_D=Right -# KeyMap_E=Enter -# KeyMap_F=Escape - - - -## Wirz SLI LCD driver ## -[sli] - -# Select the output device to use [default: /dev/lcd] -Device=/dev/lcd - -# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200, 38400, 57600, 115200] -Speed=19200 - - - -## OnScreen Display using libxosd ## -[xosd] - -# set display size [default: 20x4] -Size=20x4 - -# font to use, in XLFD format, as given by "xfontsel" -Font=-*-clean-*-*-*-*-*-160-*-*-*-*-*-* - - -# EOF diff --git a/abs/core-testing/live-installer/templates/cc.orig.sh b/abs/core-testing/live-installer/templates/cc.orig.sh deleted file mode 100755 index d8fd2dc..0000000 --- a/abs/core-testing/live-installer/templates/cc.orig.sh +++ /dev/null @@ -1,35 +0,0 @@ -#!/usr/bin/perl -# rwraithr added segment for 4 digit channels -# make sure to set this string to -# the corresponding remote in /etc/remoted.conf -#$remote_name = "RC-u43c-1h"; -$remote_name = "$REMOTE_NAME"; - -sub change_channel { - my($channel_digit) = @_; - system ("/usr/bin/irsend SEND_ONCE $remote_name $channel_digit"); - sleep .5; -} - -$channel=$ARGV[0]; -sleep 1; -if (length($channel) > 3) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); - change_channel(substr($channel,3,1)); -} elsif (length($channel) > 2) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); - change_channel(substr($channel,2,1)); -} elsif (length($channel) > 1) { - change_channel(substr($channel,0,1)); - change_channel(substr($channel,1,1)); -} else { - change_channel(substr($channel,0,1)); -} -system ("/usr/bin/irsend SEND_ONCE $remote_name SELECT"); - -#system ("sleep 2"); -#system ("/usr/bin/ivtvctl -p 2 -d /dev/video2"); -#system ("/usr/bin/ivtvctl -p 1 -d /dev/video2"); diff --git a/abs/core-testing/live-installer/templates/cc.sh b/abs/core-testing/live-installer/templates/cc.sh deleted file mode 100755 index 0cce308..0000000 --- a/abs/core-testing/live-installer/templates/cc.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -/usr/local/bin/cc.orig.sh $@ & -/usr/local/bin/cc_vol.sh & - - diff --git a/abs/core-testing/live-installer/templates/cc_vol.sh b/abs/core-testing/live-installer/templates/cc_vol.sh deleted file mode 100755 index 819008d..0000000 --- a/abs/core-testing/live-installer/templates/cc_vol.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash -sleep 2 -/usr/local/bin/ivtvctl -p 2 -d /dev/video2 -/usr/local/bin/ivtvctl -p 1 -d /dev/video2 - diff --git a/abs/core-testing/live-installer/templates/change_chan.sh b/abs/core-testing/live-installer/templates/change_chan.sh deleted file mode 100755 index 5ad8765..0000000 --- a/abs/core-testing/live-installer/templates/change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac -# /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/live-installer/templates/cron.template b/abs/core-testing/live-installer/templates/cron.template deleted file mode 100644 index 3fcea10..0000000 --- a/abs/core-testing/live-installer/templates/cron.template +++ /dev/null @@ -1,4 +0,0 @@ -# - - -00 HOUR * * * /usr/bin/sudo /sbin/halt-runit >/dev/null 2>&1 \ No newline at end of file diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address deleted file mode 100644 index 1df28d2..0000000 --- a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4address +++ /dev/null @@ -1,2 +0,0 @@ -192.168.1.158/24 - diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route b/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route deleted file mode 100644 index 373a4d1..0000000 --- a/abs/core-testing/live-installer/templates/etcnet/eth/ipv4route +++ /dev/null @@ -1,2 +0,0 @@ -default via 192.168.1.1 - diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig b/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig deleted file mode 100644 index b1f14e0..0000000 --- a/abs/core-testing/live-installer/templates/etcnet/eth/iwconfig +++ /dev/null @@ -1,2 +0,0 @@ -essid home_lan -#key ababababab diff --git a/abs/core-testing/live-installer/templates/etcnet/eth/options b/abs/core-testing/live-installer/templates/etcnet/eth/options deleted file mode 100644 index 929da58..0000000 --- a/abs/core-testing/live-installer/templates/etcnet/eth/options +++ /dev/null @@ -1,7 +0,0 @@ -# If you want to change current interface name, edit /etc/net/iftab, -# rename current directory and uncomment this line: -TYPE=eth -DISABLED=no -BOOTPROTO=dhcp -ONBOOT=yes -CONFIG_WIRELESS=no diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-4 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-4 deleted file mode 100644 index e69de29..0000000 diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-8 b/abs/core-testing/live-installer/templates/evrouter/MythVantage-8 deleted file mode 100644 index e69de29..0000000 diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full b/abs/core-testing/live-installer/templates/evrouter/MythVantage-Full deleted file mode 100644 index e69de29..0000000 diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac deleted file mode 100644 index 0e3a708..0000000 --- a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-minipac +++ /dev/null @@ -1,3 +0,0 @@ -"Ultimarc Button/Joystick/Trackball Interface " "" none key/127 "Shell//usr/bin/restartfrontend.sh" -"Ultimarc Button/Joystick/Trackball Interface " "" none key/18 "Shell/eject" - diff --git a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid b/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid deleted file mode 100644 index 7cb2e34..0000000 --- a/abs/core-testing/live-installer/templates/evrouter/MythVantage8-uhid +++ /dev/null @@ -1,3 +0,0 @@ -"Universal Human Interface Device Universal Human Interface Device" "" none key/125 "Shell//usr/bin/restartfrontend.sh" -"Universal Human Interface Device Universal Human Interface Device" "" none key/18 "Shell/eject" - diff --git a/abs/core-testing/live-installer/templates/exports.template b/abs/core-testing/live-installer/templates/exports.template deleted file mode 100644 index b946287..0000000 --- a/abs/core-testing/live-installer/templates/exports.template +++ /dev/null @@ -1,8 +0,0 @@ -# /etc/exports -# -# See exports(5) for a description. - -# use exportfs -arv to reread -/data/media REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) -/data/var/cache REPLACEME(rw,all_squash,anonuid=1000,anongid=1000) - diff --git a/abs/core-testing/live-installer/templates/fstab.conf.template b/abs/core-testing/live-installer/templates/fstab.conf.template deleted file mode 100755 index d27bcd9..0000000 --- a/abs/core-testing/live-installer/templates/fstab.conf.template +++ /dev/null @@ -1,16 +0,0 @@ -# -# /etc/fstab: static file system information -# -# -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 - -/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 -/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 -/dev/fd0 /mnt/fl vfat user,noauto 0 0 - -/dev/sda1 / reiserfs defaults 0 1 -/dev/sda2 swap swap defaults 0 0 -/dev/sda3 /data reiserfs defaults 0 0 -192.168.1.6:/media /data/media nfs - diff --git a/abs/core-testing/live-installer/templates/mysql.service b/abs/core-testing/live-installer/templates/mysql.service deleted file mode 100644 index 160450e..0000000 --- a/abs/core-testing/live-installer/templates/mysql.service +++ /dev/null @@ -1,13 +0,0 @@ - - - - - - mysql_myth on %h - - - _mysql._tcp - 3306 - - - diff --git a/abs/core-testing/live-installer/templates/mysql.txt b/abs/core-testing/live-installer/templates/mysql.txt deleted file mode 100755 index 04531b5..0000000 --- a/abs/core-testing/live-installer/templates/mysql.txt +++ /dev/null @@ -1,29 +0,0 @@ -DBHostName=127.0.0.1 -DBUserName=mythtv -DBPassword=mythtv -DBName=mythconverg -DBType=QMYSQL3 - -# Set the following if you want to use something other than the -# machine's real hostname for identifying settings in the database. -# This is useful if your hostname changes often, as otherwise -# you'll need to reconfigure mythtv (or futz with the DB) every time. -# TWO HOSTS MUST NOT USE THE SAME VALUE -# -#LocalHostName=my-unique-identifier-goes-here - -# If you want your frontend to be able to wake your MySQL server -# using WakeOnLan, have a look at the following settings: -# -# Set the time the frontend waits (in seconds) between reconnect tries. -# This should be the rough time your MySQL server needs for startup -#WOLsqlReconnectWaitTime=0 -# -# -# This is the amount of retries to wake the MySQL server until the frontend -# gives up -#WOLsqlConnectRetry=5 -# -# -# This is the command executed to wake your MySQL server. -#WOLsqlCommand=echo 'WOLsqlServerCommand not set' diff --git a/abs/core-testing/live-installer/templates/ncid.conf.template b/abs/core-testing/live-installer/templates/ncid.conf.template deleted file mode 100755 index 43ef490..0000000 --- a/abs/core-testing/live-installer/templates/ncid.conf.template +++ /dev/null @@ -1,51 +0,0 @@ -# tcl/tk configuration file - -# Directory NCID uses to find the helper scripts -set ProgDir /usr/share/ncid - -# default helper script -set EXTPROG ncid-osd - -# Set Host to the NCID server address -# Host defaults to 127.0.0.1 -#set Host 127.0.0.1 -set Host 192.168.1.5 - -# The NCID port default is 3333 -set Port 3333 - -# If the connection to the server is lost, -# try every Delay seconds to reconnect -# The Default: 60 -set Delay 20 - -# If set to 1, display raw data received from the NCID server -# If set to 0, do not display raw data received from the NCID server -# Default: 0 -set Raw 0 - -# If set to 1, output: date time number name -# If set to 0, output: name number -# Default: 0 -set All 1 - -# If set to 1, display formatted CID, and CID log file on connect -# If set to 0, ddo not isplay formatted CID, and CID log file on connect -# Default: 0 -set Verbose 0 - -# If set to 1, display information in terminal progran or external program -# If set to 0, display information using a GUI -# Default: 0 -set NoGUI 1 - -# output name and number to external program -# Default: 0 -set Callprog 1 - -# ring number to call external program -# Default: 0 -set CallOnRing 0 - -# external called program -set Program [list $ProgDir/$EXTPROG] diff --git a/abs/core-testing/live-installer/templates/ncidd.conf.template b/abs/core-testing/live-installer/templates/ncidd.conf.template deleted file mode 100644 index daa2e79..0000000 --- a/abs/core-testing/live-installer/templates/ncidd.conf.template +++ /dev/null @@ -1,143 +0,0 @@ -# ncid - Network CallerID Server Config File - -################################ -# Definitions and Line formats # -################################ - -# lines can be blank, or start with the words: send, set # -# -# A line is divided into words, separated by spaces -# -# A word is either a string of non-blank characters, everything -# between double quotes, or an equal sign. -# -# SEND LINE FORMAT: -# send DATATYPE [DATATYPE] ... -# where DATATYPE = cidlog, cidinfo -# -# SET LINE FORMAT: -# set ITEM = VALUE [ITEM = VALUE] ... -# where ITEM = cidalias, cidlog, datalog, initcid, initstr, -# lockfile, port, ttyclocal, ttyport, ttyspeed, -# nomodem - -############################ -# Log and Info for Clients # -############################ - -# Send the call log to a client when connected -# The default is not to send the call log file -send cidlog - -# Send call info (LINE and RING) to a client at each ring -# The default is not to send the call info line -send cidinfo - -############################ -# NCID Communications Port # -############################ - -# The default TCP/IP port is 3333 - set port = 3333 - -####################### -# Alias and Log Files # -####################### - -# The default CID alias file: /etc/ncid/ncidd.alias -# set cidalias = /etc/ncid/ncidd.alias - -# The default CID call log file: /var/log/cidcall.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set cidlog = /var/log/cidcall.log - -# The default tty data log file: /var/log/ciddata.log -# the log file must exist, ncidd will not create it -# (also make the change in /etc/logrotate.d/ncidd -# and also /etc/ncid/ncidrotate.conf) -# set datalog = /var/log/ciddata.log - -##################### -# TTY Configuration # -##################### - -# The default tty port: /dev/modem -# set ttyport = /dev/cu.modem # Macintosh OS X - set ttyport = /dev/ttyS1 - -# The default tty port speed: 19200 -# The tty speed can be one of: 38400, 19200, 9600, 4800 -# set ttyspeed = 4800 # NetCallerID port speed - -# Ignore tty control signals for internal modems and 3 wire serial cables -# Disable tty control signals: ttyclocal = 1 -# Enable tty control signals: ttyclocal = 0 (default) -# set ttyclocal = 1 - -# The lockfile name is generated automatically -# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem -# set lockfile = /var/lock/LCK..ttyS0 - -##################### -# Modem or No Modem # -##################### - -# Obtain CallerID from a CID device or a modem -# device: nomodem = 1 (do not send AT commands) -# modem: nomodem = 0 (default - send AT commands) -# set nomodem = 1 - -######################## -# Modem Initialization # -######################## - -# The default modem initialization is: "AT Z S0=0 E1 V1 Q0" -# set initstr = "ATE1V1Q0" -# -# Alternate modem initialization string -# set initstr = "AT&FE1V1Q0+VIP" - -# Addon strings to set modem for Distinctive Ring: -# http://www.modemsite.com/56k/dring.asp -# -# 3Com/USR/TI chipset: ATS41=1 -# Reported Ring Codes: RING A, RING B, RING C -# Rockwell/Conexant chipset: AT-SDR=7 -# Reported Ring Codes: RING 1, RING 2, RING 3 -# Lucent/Agere chipset: AT+VDR=1,0 -# Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34 -# -# Example adds 3Com DR to the default modem initialization -# set initstr = "ATE1V1Q0S41=1" - -# The default for ncidd is to try two CID strings to setup -# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1". -# set initcid = "AT#CID=1" -# -# Alternate CID strings to try if default does not work: -# set initcid = "AT+FCLASS=8;+VCID=1" -# set initcid = "AT-STE=1;+VCID=1" -# set initcid = "AT-STE=1;#CID=1" - -################# -# TiVo Settings # -################# -# set ttyclocal = 1 # TiVo requires CLOCAL -# set ttyport = /dev/ttyS1 # TiVo Modem Port -# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port -# -# To use a modem on the TiVo serial port -# Tivo (stereo mini jack) -> -# -> (stereo mini plug) TiVo serial cable (9-pin male) -> -# -> (9-pin Female) PC modem cable (25-pin Male -> -# -> (25-pin Female) Modem -# if the modem has switches, disable DTR -# Use this string to set the modem before attaching it to the TiVo: -# AT&F0&D0&B1&W -# -# set ttyport = /dev/ttyS3 # TiVo Serial Port -# -# End TiVo Settings - diff --git a/abs/core-testing/live-installer/templates/real_change_chan.sh b/abs/core-testing/live-installer/templates/real_change_chan.sh deleted file mode 100755 index efeba88..0000000 --- a/abs/core-testing/live-installer/templates/real_change_chan.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -REMOTE_NAME=SA3250 -cmd="$1" - -case $cmd in - [0-9]*) - for digit in $(echo $1 | sed -e 's/./& /g'); do - irsend SEND_ONCE $REMOTE_NAME $digit - sleep 0.3 - # If things work OK with sleep 1, try this for faster channel changes: - # sleep 0.3 - done - ;; - - *) - irsend SEND_ONCE $REMOTE_NAME $cmd - ;; - esac - /usr/bin/fix_audio.sh & diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf deleted file mode 100644 index e7c1539..0000000 --- a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircd.ATI.conf +++ /dev/null @@ -1,357 +0,0 @@ - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.0pre2(atiusb) on Fri Jan 2 19:09:02 2004 -# -# contributed by -# -# brand: ATI Remote Wonder -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name wonder - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 147987 - toggle_bit 0 - - - begin codes - A 0x0000000014C500F0 - B 0x0000000014C601F0 - POWER 0x0000000014C702F0 - TV 0x0000000014C803F0 - DVD 0x0000000014C904F0 - WEB 0x0000000014CA05F0 - GUIDE 0x0000000014CB06F0 - GRAB 0x0000000014CC07F0 - VOL_DOWN 0x0000000014CE09F0 - VOL_UP 0x0000000014CD08F0 - MUTE 0x0000000014CF0AF0 - CH_DOWN 0x0000000014D10CF0 - CH_UP 0x0000000014D00BF0 - A 0x0000000014C500F0 - B 0x0000000014C601F0 - 1 0x0000000014D20DF0 - 2 0x0000000014D30EF0 - 3 0x0000000014D40FF0 - 4 0x0000000014D510F0 - 5 0x0000000014D611F0 - 6 0x0000000014D712F0 - 7 0x0000000014D813F0 - 8 0x0000000014D914F0 - 9 0x0000000014DA15F0 - 0 0x0000000014DC17F0 - MENU 0x0000000014DB16F0 - CHECK 0x0000000014DD18F0 - C 0x0000000014DE19F0 - D 0x0000000014E01BF0 - UP 0x0000000014DF1AF0 - LEFT 0x0000000014E21DF0 - DOWN 0x0000000014E722F0 - RIGHT 0x0000000014E41FF0 - OK 0x0000000014E31EF0 - REPLAY 0x0000000014E11CF0 - FULLSCREEN 0x0000000014E520F0 - E 0x0000000014E621F0 - F 0x0000000014E823F0 - REWIND 0x0000000014E924F0 - FORWARD 0x0000000014EB26F0 - PLAY 0x0000000014EA25F0 - RECORD 0x0000000014EC27F0 - STOP 0x0000000014ED28F0 - PAUSE 0x0000000014EE29F0 - end codes - -end remote - - - -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 -# -# contributed by Steffen -# -# brand: ATI Sapphire Remote Bob II USB -# model no. of remote control: 5000024400 -# devices being controlled by this remote: MythTV -# - -begin remote - -name wonder II -bits 16 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -pre_data_bits 8 -pre_data 0x0 -post_data_bits 16 -post_data 0x0 -gap 299851 -toggle_bit 0 - - -begin codes -aux1 0x023F -aux2 0x023F -aux3 0x023F -aux4 0x023F -mouse_left_btn 0x02A9 -mouse_right_btn 0x02AA -a 0x0278 -b 0x0279 -power 0x020C -dvd 0x0238 -tv 0x0239 -help 0x02BE -pc 0x023F -resize 0x02D5 -hand 0x02D0 -ati 0x028E -vol_up 0x0210 -vol_down 0x0211 -mute 0x020D -ch_up 0x0220 -ch_down 0x0221 -mouse_up 0x013F -mouse_down 0x013F -mouse_left 0x013F -mouse_right 0x013F -1 0x0201 -2 0x0202 -3 0x0203 -4 0x0204 -5 0x0205 -6 0x0206 -7 0x0207 -8 0x0208 -9 0x0209 -0 0x0200 -list 0x0254 -check 0x0282 -info 0x02F9 -timer 0x0296 -arrow_up 0x0258 -arrow_left 0x025A -arrow_right 0x025B -arrow_down 0x0259 -ok 0x025C -c 0x017A -d 0x027B -play 0x022C -e 0x027C -f 0x027D -rewind 0x0229 -rec 0x0237 -stop 0x0231 -pause 0x0230 -ffwd 0x0228 -end codes - -end remote - - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Sat Jun 19 16:27:14 2004 -# -# contributed by gLaNDix -# -# brand: ATI -# model no. of remote control: 5000023600 -# devices being controlled by this remote: MythTV 0.14 -# -# USB ID: 0bc7:0004 -# - -begin remote - - name REMOTE_WONDER - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227933 - toggle_bit 0 - - - begin codes - A 0x000000000000D500 - B 0x000000000000D601 - C 0x000000000000EE19 - D 0x000000000000F01B - E 0x000000000000F621 - F 0x000000000000F823 - POWER 0x000000000000D702 - TV 0x000000000000D803 - DVD 0x000000000000D904 - WEB 0x000000000000DA05 - BOOK 0x000000000000DB06 - HAND 0x000000000000DC07 - MOUSE_LEFT_BTN 0x0000000000004D78 - MOUSE_LEFTBUTTONUP 0x0000000000004E79 - MOUSE_LEFTBUTTONDBLCLICK 0x0000000000004E79 - MOUSE_RIGHT_BTN 0x000000000000517C - MOUSE_RIGHTBUTTONUP 0x000000000000527D - MOUSE_RIGHTBUTTONDBLCLICK 0x000000000000537E - MOUSE_LEFT 0x0000000000004570 - MOUSE_RIGHT 0x0000000000004671 - MOUSE_UP 0x0000000000004772 - MOUSE_DOWN 0x0000000000004873 - MOUSE_UPRIGHT 0x0000000000004A75 - MOUSE_DOWNRIGHT 0x0000000000004B76 - MOUSE_DOWNLEFT 0x0000000000004C77 - MOUSE_UPLEFT 0x0000000000004974 - VOL_UP 0x000000000000DD08 - VOL_DOWN 0x000000000000DE09 - MUTE 0x000000000000DF0A - CH_DOWN 0x000000000000E10C - CH_UP 0x000000000000E00B - 1 0x000000000000E20D - 2 0x000000000000E30E - 3 0x000000000000E40F - 4 0x000000000000E510 - 5 0x000000000000E611 - 6 0x000000000000E712 - 7 0x000000000000E813 - 8 0x000000000000E914 - 9 0x000000000000EA15 - 0 0x000000000000EC17 - DVD_ROOTMENU 0x000000000000EB16 - SETUP 0x000000000000ED18 - ARROW_UP 0x000000000000EF1A - ARROW_RIGHT 0x000000000000F41F - ARROW_DOWN 0x000000000000F722 - ARROW_LEFT 0x000000000000F21D - OK 0x000000000000F31E - MAXAMIZE 0x000000000000F520 - TV_ON_DEMAND 0x000000000000F11C - BACK 0x000000000000F924 - PLAY 0x000000000000FA25 - NEXT 0x000000000000FB26 - RECORD 0x000000000000FC27 - STOP 0x000000000000FD28 - PAUSE 0x000000000000FE29 - end codes - -end remote - - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 -# -# contributed by Jason Piterak -# -# brand: ati -# This uses the atiusb driver -#=20 -# model no. of remote control: 5000022000 -# -# devices being controlled by this remote: -# MythTV PVR using knopmyth by Cecil and Dale at -# http://mysettopbox.tv -# Key map names are as per ATI's website: -#http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html -# Feel free to change them as you see fit :-) -# -# NOTE: There are 16 channels for this remote; this file only -# supports one channel. See the GATOS project for information -# on how to change the channel. Not tested. Unknown channel. -# - -begin remote - - name atiusb - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0xF000 - gap 139891 - toggle_bit 0 - - - begin codes - a 0x000000000000C500 - b 0x000000000000C601 - power 0x000000000000C702 - tv 0x000000000000C803 - dvd 0x000000000000C904 - web 0x000000000000CA05 - media_library 0x000000000000CB06 - drag 0x000000000000CC07 - mouse-button_left 0x0000000000003D78 - mouse-button_right 0x000000000000417C - mouse-up 0x0000000000003772 - mouse-down 0x0000000000003873 - mouse-left 0x0000000000003570 - mouse-right 0x0000000000003671 - mouse-left_up 0x0000000000003974 - mouse-right_up 0x0000000000003A75 - mouse-left_down 0x0000000000003C77 - mouse-right_down 0x0000000000003B76 - vol-up 0x000000000000CD08 - vol-down 0x000000000000CE09 - mute 0x000000000000CF0A - chan-up 0x000000000000D00B - chan-down 0x000000000000D10C - 1 0x000000000000D20D - 2 0x000000000000D30E - 3 0x000000000000D40F - 4 0x000000000000D510 - 5 0x000000000000D611 - 6 0x000000000000D712 - 7 0x000000000000D813 - 8 0x000000000000D914 - 9 0x000000000000DA15 - 0 0x000000000000DC17 - dvd-root_menu 0x000000000000DB16 - launch_setup 0x000000000000DD18 - c 0x000000000000DE19 - d 0x000000000000E01B - tv_on_demand 0x000000000000E11C - max_window 0x000000000000E520 - cursor-up 0x000000000000DF1A - cursor-down 0x000000000000E722 - cursor-left 0x000000000000E21D - cursor-right 0x000000000000E41F - ok 0x000000000000E31E - e 0x000000000000E621 - f 0x000000000000E823 - rewind 0x000000000000E924 - play 0x000000000000EA25 - fast_forward 0x000000000000EB26 - record 0x000000000000EC27 - stop 0x000000000000ED28 - pause 0x000000000000EE29 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt deleted file mode 100644 index 80eec07..0000000 --- a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/lircrc-atiwonder.txt +++ /dev/null @@ -1,922 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the ATI-Wonder Remote -# using lirc_atiusb driver -# - -begin -prog = mythtv -button = a -config = E -repeat = 5 -end - -begin -prog = mythtv -button = A -config = E -repeat = 5 -end - -begin -prog = mythtv -button = b -config = O -repeat = 5 -end - -begin -prog = mythtv -button = B -config = O -repeat = 5 -end - -begin -prog = mythtv -button = B -config = O -repeat = 5 -end - -begin -prog = mythtv -button = stop -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = ffwd -config = Right -repeat = 5 -end - -begin -prog = mythtv -button = FORWARD -config = Right -repeat = 5 -end - -begin -prog = mythtv -button = rewind -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = REWIND -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = pause -config = P -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = P -repeat = 5 -end - -begin -prog = mythtv -button = play -config = P -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = P -repeat = 5 -end - -begin -prog = mythtv -button = mute -config = | -repeat = 5 -end - -begin -prog = mythtv -button = MUTE -config = | -repeat = 5 -end - -begin -prog = mythtv -button = vol_down -config = F10 -repeat = 5 -end - -begin -prog = mythtv -button = VOL_DOWN -config = F10 -repeat = 5 -end - -begin -prog = mythtv -button = vol_up -config = F11 -repeat = 5 -end - -begin -prog = mythtv -button = VOL_UP -config = F11 -repeat = 5 -end - -begin -prog = mythtv -button = f -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = F -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = e -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = E -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = ch_up -config = Up -repeat = 5 -end - -begin -prog = mythtv -button = CH_UP -config = Up -repeat = 5 -end - -begin -prog = mythtv -button = ch_down -config = Down -repeat = 5 -end - -begin -prog = mythtv -button = CH_DOWN -config = Down -repeat = 5 -end - -begin -prog = mythtv -button = ok -config = Enter -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Enter -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = rec -config = R -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = R -repeat = 5 -end - - -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the ATI-Wonder Remote -# using lirc_atiusb driver -# - -begin -#Jumppoint for Program Guide created in Mythweb - prog = mythtv - button = TV - config = ! -end - -begin -#Jumppoint for DVD playback created in Mythweb - prog = mythtv - button = DVD - config = @ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = WEB - config = # -end - -begin - prog = mythtv -#Jumppoint for MythVideo created in Mythweb - button = BOOK - config = $ -end - -begin - prog = mythtv -#Jumppoint for MythWeater created in Mythweb - button = HAND - config = % -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin - prog = mythtv - button = MOUSE_UP - config = Up -end - -begin - prog = mythtv - button = MOUSE_DOWN - config = Down -end - -begin - prog = mythtv - button = MOUSE_LEFT - config = Left -end - -begin - prog = mythtv - button = MOUSE_RIGHT - config = Right -end - -begin - prog = mythtv - button = MOUSE_RIGHT_BTN - config = Esc -end - -begin - prog = mythtv -# Enter button - button = MOUSE_LEFT_BTN - config = Return -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -begin - prog = mythtv -# Enter button - button = OK - config = Return -end - -begin - prog = mythtv - button = ARROW_UP - config = Up -end - -begin - prog = mythtv - button = ARROW_DOWN - config = Down -end - -begin - prog = mythtv - button = ARROW_LEFT - config = Left -end - -begin - prog = mythtv - button = ARROW_RIGHT - config = Right -end - -begin - prog = mythtv - button = D - config = Esc -end - -begin -prog = mythtv -button = CH_UP -config = Up -end - -begin -prog = mythtv -button = CH_DOWN -config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = F10 -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = F11 -end - -begin - prog = mythtv - button = MUTE - config = | -end - -begin - prog = mythtv - button = DVD_ROOTMENU - config = M -end - -begin - prog = mythtv -# Enter button - button = SETUP - config = Return -end - - -begin - prog = mythtv - button = A - config = S -end - -begin - prog = mythtv - button = B - config = I -end - -begin - prog = mythtv - button = C - config = T -end - -begin -prog = mythtv -# Change focus for PiP (to change channel in the other window) -button = MAXAMIZE -config = B -end - -begin -prog = mythtv -# Toggle PiP on/off -button = TV_ON_DEMAND -config = V -end - -begin - prog = mythtv - button = BACK - config = < -end - -begin - prog = mythtv - button = NEXT - config = > -end - -begin - prog = mythtv - button = BACK - config = Left -end - - -begin - prog = mythtv - button = NEXT - config = Right -end - -begin -prog = mythtv -button = RECORD -config = R -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = P -end - -begin -prog = mythtv -button = PAUSE -config = P -end - -#Page Up/Down -begin -prog = mythtv -button = E -config = PgUp -end - -begin -prog = mythtv -button = F -config = PgDown -end - -begin -prog = mythtv -button = E -# Use for backwards commercial skip -config = Q -end - -begin -prog = mythtv -button = F -# Use for forward commercial skip -config = Z -end - -#Mplayer - -begin -prog = mplayer -button = PLAY -config = pause -end - -begin -prog = mplayer -button = PAUSE -config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = D -config = quit -end - -begin -prog = mplayer -button = MOUSE_RIGHT_BTN -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = E -repeat = 6 -config = seek -10 -end - -begin -prog = mplayer -button = F -repeat = 6 -config = seek 10 -end - -begin -prog = mplayer -button = BACK -repeat = 6 -config = seek -70 -end - -begin -prog = mplayer -button = NEXT -repeat = 6 -config = seek 70 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 6 -config = volume -1 -end - -begin -prog = mplayer -button = VOL_UP -repeat = 6 -config = volume 1 -end - -#Xine - -begin -prog = xine -button = PLAY -config = Play -end - -begin -prog = xine -button = PAUSE -config = PAUSE -end - -begin -prog = xine -button = Mute -config = Mute -end - -begin -prog = xine -button = STOP -config = Stop -end - -begin -prog = xine -button = POWER -config = Quit -end - -begin -prog = xine -button = D -config = quit -end - -begin -prog = xine -button = MOUSE_RIGHT_BTN -config = quit -end - -begin -prog = xine -button = ARROW_UP -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = ARROW_DOWN -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = ARROW_LEFT -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = ARROW_RIGHT -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = MOUSE_UP -repeat = 4 -config = EventUp -end - -begin -prog = xine -button = MOUSE_DOWN -repeat = 4 -config = EventDown -end - -begin -prog = xine -button = MOUSE_LEFT -repeat = 4 -config = EventLeft -end - -begin -prog = xine -button = MOUSE_RIGHT -repeat = 4 -config = EventRight -end - -begin -prog = xine -button = MOUSE_LEFT_BTN -repeat = 0 -config = EventSelect -end - -begin -prog = xine -button = DVD_ROOTMENU -repeat = 0 -config = Menu -end - -#vol down -begin -prog = xine -button = VOL_DOWN -repeat = 1 -config = Volume- -end - -#vol up -begin -prog = xine -button = VOL_UP -repeat = 1 -config = Volume+ -end - -begin -prog = xine -button = TV_ON_DEMAND -repeat = 1 -config = ZoomIn -end - -begin -prog = xine -button = MAXAMIZE -repeat = 1 -config = ZoomOut -end - -#skip chapter forward -begin -prog = xine -button = NEXT -repeat = 1 -config = EventNext -end - -#skip chapter backward -begin -prog = xine -button = BACK -repeat = 1 -config = EventPrior -end - -begin -prog = xine -button = F -repeat = 2 -config = SeekRelative+45 -end - -begin -prog = xine -button = E -repeat = 2 -config = SeekRelative-45 -end - diff --git a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg b/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg deleted file mode 100644 index 351a111..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/ATI_wonder/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS deleted file mode 100644 index b76d32c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircd.conf.MX-500-JAMS +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc deleted file mode 100644 index 5e668b5..0000000 --- a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg deleted file mode 100644 index 38857f9..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/MX-500-jams/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf deleted file mode 100644 index b76d32c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircd.conf +++ /dev/null @@ -1,115 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - - -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.2(streamzap) on Mon Dec 5 08:45:02 2005 -# -# contributed by -# -# brand: RS_LD_120-MX500 -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name RS_LD - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 384 1920 - zero 384 896 - ptrail 384 - gap 70400 - min_repeat 2 - toggle_bit 0 - - - begin codes - RESET 0x19FD - TIME 0X1902 - BLANK 0X1B02 - PICTURE 0X1882 - ASPECT 0X1A82 - BROWSE 0X1982 - DELETE 0X1B82 - CARD 0X1842 - CARD_SOURCE 0X1A42 - SPARE1 0X1942 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc deleted file mode 100755 index 2663c63..0000000 --- a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/lircrc +++ /dev/null @@ -1,857 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 5 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -repeat = 5 -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -repeat = 5 -end - -begin -prog = mythtv -button = 1 -config = 1 -repeat = 5 -end - -begin -prog = mythtv -button = 2 -config = 2 -repeat = 5 -end - -begin -prog = mythtv -button = 3 -config = 3 -repeat = 5 -end - -begin -prog = mythtv -button = 4 -config = 4 -repeat = 5 -end - -begin -prog = mythtv -button = 5 -config = 5 -repeat = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -repeat = 5 -end - -begin -prog = mythtv -button = 7 -config = 7 -repeat = 5 -end - -begin -prog = mythtv -button = 8 -config = 8 -repeat = 5 -end - -begin -prog = mythtv -button = 9 -config = 9 -repeat = 5 -end - - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -repeat = 5 -end - -begin -prog = mythtv -button = OK -config = Return -repeat = 5 -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -repeat = 5 -end - -begin -prog = mythtv -button = EXIT -config = Esc -repeat = 5 -end - -begin -prog = mythtv -button = PLAY -config = Space -repeat = 5 -end - -begin -prog = mythtv -button = PAUSE -config = p -repeat = 5 -end - -begin -prog = mythtv -button = STOP -config = Esc -repeat = 5 -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -repeat = 5 -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -repeat = 5 -end - -begin -prog = mythtv -button = RECORD -config = r -repeat = 5 -end - -begin -prog = mythtv -# rewind -button = << -config = Home -repeat = 5 -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -repeat = 5 -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = S -repeat = 5 -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg b/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg deleted file mode 100644 index e2af610..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/MythVantage-one/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf deleted file mode 100644 index f8175f3..0000000 --- a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircd-rs.conf +++ /dev/null @@ -1,87 +0,0 @@ -# this config file was generated -# using lirc-0.7.0pre2(hauppauge) on Thu Jan 1 00:35:50 2004 -# -# contributed by Jarod Wilson -#------------------------------------------------------------------------------ -# -# filename: RadioShack_15-2116-vcr0081.lirc -# encoding: RC-5 -# brand: RadioShack Universal (and others) -# model: 15-2116, set as VCR type 0081 -# supported devices: all -# -# note: requires quite a bit of key reassignment w/keymover and EFCs... -# see http://wilsonet.com/mythtv/rs15-2116.html for HOWTO -# -#------------------------------------------------------------------------------ - -begin remote - - name rs15-2116-vcr0081 - bits 11 - flags RC5|CONST_LENGTH - eps 20 - aeps 0 - header 0 0 - one 889 889 - zero 889 889 - plead 889 - ptrail 0 - foot 0 0 - repeat 0 0 - pre_data_bits 2 - pre_data 0x02 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 113792 - toggle_bit 2 - frequency 36000 - duty_cycle 50 - - begin codes - 0 0x0000000000000140 - 1 0x0000000000000141 - 2 0x0000000000000142 - 3 0x0000000000000143 - 4 0x0000000000000144 - 5 0x0000000000000145 - 6 0x0000000000000146 - 7 0x0000000000000147 - 8 0x0000000000000148 - 9 0x0000000000000149 - INFO 0x000000000000014a - SELECT 0x000000000000014b - POWER 0x000000000000014c - MUTE 0x000000000000014d - MOVE 0x000000000000014e - VOL+ 0x0000000000000150 - VOL- 0x0000000000000151 - RIGHT 0x000000000000015a - LEFT 0x000000000000015b - ENTER 0x000000000000015c - MENU 0x000000000000015d - CH+ 0x0000000000000160 - CH- 0x0000000000000161 - PIP 0x0000000000000162 - SWAP 0x0000000000000163 - SLEEP 0x0000000000000166 - FREEZE 0x0000000000000168 - PAUSE 0x0000000000000169 - SKIP 0x000000000000016a - EXIT 0x0000000000000171 - REW 0x0000000000000172 - REPLAY 0x0000000000000173 - FFWD 0x0000000000000174 - PLAY 0x0000000000000175 - STOP 0x0000000000000176 - REC 0x0000000000000177 - SKIP 0x0000000000000178 - +100 0x0000000000000179 - LAST 0x000000000000017b - GUIDE 0x000000000000017c - TV/VIDEO 0x000000000000017e - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs deleted file mode 100644 index 91c0de5..0000000 --- a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/lircrc-rs +++ /dev/null @@ -1,539 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the RadioShack 15-2116, VCR type 0081 -# using Hauppauge IR receiver -# -# By Jarod Wilson, 2003/12/31 -# Amalgamated from Harry O's -# .lircrc, the mythtv.org docs, and -# a few touches of my own. :) -# - -# Channel Up -begin -prog = mythtv -button = CH+ -repeat = 4 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = CH- -repeat = 4 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = SELECT -repeat = 4 -config = Return -end - -# Play -begin -prog = mythtv -button = PLAY -repeat = 4 -config = Space -end - -# Stop -begin -prog = mythtv -button = STOP -repeat = 4 -config = Esc -end - -# Escape/Exit/Back -begin -prog = mythtv -button = EXIT -repeat = 4 -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -repeat = 4 -config = Esc -end - -# Pause -begin -prog = mythtv -button = PAUSE -repeat = 4 -config = P -end - -# Mute -begin -prog = mythtv -button = MUTE -repeat = 4 -config = | -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = REW -repeat = 4 -config = Left -end - -begin -prog = mythtv -button = LEFT -repeat = 4 -config = Left -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = FFWD -repeat = 4 -config = Right -end - -begin -prog = mythtv -button = RIGHT -repeat = 4 -config = Right -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = FREEZE -repeat = 4 -config = PgDown -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = MOVE -repeat = 4 -config = PgUp -end - -# Record -begin -prog = mythtv -button = REC -repeat = 4 -config = R -end - -# OSD browse -begin -prog = mythtv -button = GUIDE -repeat = 4 -config = O -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = MENU -repeat = 4 -config = M -end - -# Bring up OSD info -begin -prog = mythtv -button = INFO -repeat = 4 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = +100 -repeat = 4 -config = W -end - -# Seek to previous commercial cut point -begin -prog = mythtv -button = SLEEP -repeat = 4 -config = Q -end - -# Seek to next commercial cut point -begin -prog = mythtv -button = ENTER -repeat = 4 -config = Z -end - -# Change TV card input -begin -prog = mythtv -button = TV/VIDEO -repeat = 4 -config = C -end - -# Toggle Picture-In-Picture -begin -prog = mythtv -button = PIP -repeat = 4 -config = V -end - -# Swap PIP -begin -prog = mythtv -button = SWAP -repeat = 4 -config = N -end - -# Cycle through channel history -begin -prog = mythtv -button = LAST -repeat = 4 -config = H -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 4 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 4 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 4 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 4 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 4 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 4 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 4 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 4 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 4 -config = 9 -end - -### MPlayer commands - -begin -prog = mplayer -button = MENU -repeat = 4 -config = osd -end - -begin -prog = mplayer -button = PAUSE -repeat = 4 -config = pause -end - -begin -prog = mplayer -button = PLAY -repeat = 4 -config = seek +1 -end - -begin -prog = mplayer -button = STOP -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = mplayer -button = REW -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = LEFT -repeat = 4 -config = seek -10 -end - -begin -prog = mplayer -button = FFWD -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = RIGHT -repeat = 4 -config = seek +30 -end - -begin -prog = mplayer -button = EXIT -repeat = 4 -config = quit -end - -begin -prog = mplayer -button = FREEZE -repeat = 4 -config = seek +1200 -end - -begin -prog = mplayer -button = MOVE -repeat = 4 -config = seek -1200 -end - -begin -prog = mplayer -button = +100 -repeat = 4 -config = vo_fullscreen -end - -### Xine commands - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = SELECT -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = GUIDE -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFWD -repeat = 3 -config = SeekRelative+30 -end - -begin -prog = xine -button = REW -repeat = 3 -config = SeekRelative-30 -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = FREEZE -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = LAST -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = INFO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = ENTER -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = SLEEP -repeat = 3 -config = SpeedSlower -end diff --git a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg b/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg deleted file mode 100644 index d465839..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/RadioShack_15-2116-Jarod_Wilson/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410 b/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410 deleted file mode 100644 index 3f6c5f0..0000000 --- a/abs/core-testing/live-installer/templates/remotes/adaptec/lircd.conf.AVC-2410 +++ /dev/null @@ -1,62 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Mon Mar 7 14:55:17 2005 -# -# contributed by -# -# brand: Adaptec -# model no. of remote control: -# devices being controlled by this remote: AVC-2410 capture card -# - -begin remote - - name AVC-2410 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 16 - pre_data 0x82F1 - gap 202922 - min_repeat 0 - toggle_bit 0 - - - begin codes - Live 0x00000000000025DA - Timeshift 0x00000000000017E8 - Scan 0x00000000000018e7 - Power 0x00000000000009f6 - 1 0x00000000000026D9 - 2 0x00000000000019E6 - 3 0x00000000000010EF - 4 0x00000000000027D8 - 5 0x00000000000020DF - 6 0x00000000000011EE - 7 0x00000000000028D7 - 8 0x00000000000021DE - 9 0x00000000000012ED - 0 0x00000000000022DD - Mute 0x00000000000013EC - Full 0x00000000000029D6 - Play 0x00000000000030CF - Stop 0x00000000000023DC - Skip 0x00000000000024DB - Replay 0x00000000000014EB - Rewind 0x00000000000031CE - Forward 0x00000000000015EA - Ch+ 0x00000000000001FE - Ch- 0x00000000000005FA - Vol+ 0x00000000000004FB - Vol- 0x00000000000002FD - Enter 0x00000000000003FC - OSD 0x00000000000032CD - cc 0x00000000000016E9 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax b/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax deleted file mode 100644 index 06a4102..0000000 --- a/abs/core-testing/live-installer/templates/remotes/animax/lircd.conf.animax +++ /dev/null @@ -1,199 +0,0 @@ - -# -# This is a space encoded remote control from AnimaX. -# You need at least lirc-0.5.4 to use this config file -# -# contributed by Karsten Scheibler -# -# brand: AnimaX -# model: Anir Remote Control -# supported devices: This remote control comes with some TV Tuner cards from -# Hauppauge. -# - -begin remote - - name ANIMAX - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 2500 2500 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_gap 102937 - repeat_bit 0 - - begin codes - CD_DOWN 0x000000000000DB24 - CD_UP 0x0000000000005BA4 - TV_DOWN 0x000000000000DC23 - TV_UP 0x0000000000005CA3 - PHONE_DOWN 0x000000000000DD22 - PHONE_UP 0x0000000000005DA2 - RADIO_DOWN 0x000000000000DE21 - RADIO_UP 0x0000000000005EA1 - VIDEO_DOWN 0x000000000000DF20 - VIDEO_UP 0x0000000000005FA0 - AUX1_DOWN 0x000000000000E01F - AUX1_UP 0x000000000000609F - MAIL_DOWN 0x000000000000E11E - MAIL_UP 0x000000000000619E - AUX2_DOWN 0x000000000000E21D - AUX2_UP 0x000000000000629D - POWER_DOWN 0x000000000000E31C - POWER_UP 0x000000000000639C - LEFT_MOUSE_BUTTON_TOUCH_DOWN 0x000000000000E41B - LEFT_MOUSE_BUTTON_TOUCH_UP 0x000000000000649B - REWIND_DOWN 0x000000000000E51A - REWIND_UP 0x000000000000659A - PLAY_DOWN 0x000000000000E619 - PLAY_UP 0x0000000000006699 - FORWARD_DOWN 0x000000000000E718 - FORWARD_UP 0x0000000000006798 - SKIP_BACKWARD_DOWN 0x000000000000E817 - SKIP_BACKWARD 0x0000000000006897 - STOP_DOWN 0x000000000000E916 - STOP_UP 0x0000000000006996 - SKIP_FORWARD_DOWN 0x000000000000EA15 - SKIP_FORWARD_UP 0x0000000000006A95 - CHANNEL_UP_DOWN 0x000000000000EB14 - CHANNEL_UP_UP 0x0000000000006B94 - MENU_DOWN 0x000000000000EC13 - MENU_UP 0x0000000000006C93 - VOLUME_UP_DOWN 0x000000000000ED12 - VOLUME_UP_UP 0x0000000000006D92 - BLUE_BUTTON_DOWN 0x000000000000EE11 - BLUE_BUTTON_UP 0x0000000000006E91 - MUTE_DOWN 0x000000000000EF10 - MUTE_UP 0x0000000000006F90 - VOLUME_DOWN_DOWN 0x000000000000F00F - VOLUME_DOWN_UP 0x000000000000708F - RED_BUTTON_DOWN 0x000000000000F10E - RED_BUTTON_UP 0x000000000000718E - GREEN_BUTTON_DOWN 0x000000000000F20D - GREEN_BUTTON_UP 0x000000000000728D - CHANNEL_DOWN_DOWN 0x000000000000F30C - CHANNEL_DOWN_UP 0x000000000000738C - 1_DOWN 0x000000000000F40B - 1_UP 0x000000000000748B - 2_DOWN 0x000000000000F50A - 2_UP 0x000000000000758A - 3_DOWN 0x000000000000F609 - 3_UP 0x0000000000007689 - 4_DOWN 0x000000000000F708 - 4_UP 0x0000000000007788 - 5_DOWN 0x000000000000F807 - 5_UP 0x0000000000007887 - 6_DOWN 0x000000000000F906 - 6_UP 0x0000000000007986 - 7_DOWN 0x000000000000FA05 - 7_UP 0x0000000000007A85 - 8_DOWN 0x000000000000FB04 - 8_UP 0x0000000000007B84 - 9_DOWN 0x000000000000FC03 - 9_UP 0x0000000000007C83 - SLASH_DOWN 0x000000000000FD02 - SLASH_UP 0x0000000000007D82 - 0_DOWN 0x000000000000FE01 - 0_UP 0x0000000000007E81 - MINUS_DOWN 0x000000000000FF00 - MINUS_UP 0x0000000000007F80 - end codes - -end remote - - -begin remote - - name ANIMAX_MOUSE_BUTTONS - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 0 0 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_bit 0 - - begin codes - RIGHT_MOUSE_BUTTON_DOWN 0x000000000000C639 - RIGHT_MOUSE_BUTTON_UP 0x00000000000046B9 - LEFT_MOUSE_BUTTON_DOWN 0x000000000000CE31 - LEFT_MOUSE_BUTTON_UP 0x0000000000004EB1 - end codes - -end remote - - -begin remote - - name ANIMAX_MOUSE_PAD - bits 16 - flags SPACE_ENC|REVERSE - eps 20 - aeps 0 - - header 4500 4500 - one 562 1682 - zero 562 562 - ptrail 562 - plead 0 - foot 0 0 - repeat 2500 2500 - pre_data_bits 8 - pre_data 0xF0 - post_data_bits 0 - post_data 0x0 - pre 0 0 - post 0 0 - gap 12937 - repeat_gap 8437 - repeat_bit 0 - - begin codes - MOUSE_NNW 0x000000000000906F - MOUSE_NW 0x000000000000D02F - MOUSE_NWW 0x000000000000916E - MOUSE_W 0x000000000000D12E - MOUSE_SWW 0x000000000000926D - MOUSE_SW 0x000000000000D22D - MOUSE_SSW 0x000000000000936C - MOUSE_S 0x000000000000D32C - MOUSE_SSE 0x000000000000946B - MOUSE_SE 0x000000000000D42B - MOUSE_SEE 0x000000000000956A - MOUSE_E 0x000000000000D52A - MOUSE_NEE 0x0000000000009669 - MOUSE_NE 0x000000000000D629 - MOUSE_NNE 0x0000000000009768 - MOUSE_N 0x000000000000D728 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax b/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax deleted file mode 100644 index 09a2341..0000000 --- a/abs/core-testing/live-installer/templates/remotes/animax/lircmd.conf.animax +++ /dev/null @@ -1,71 +0,0 @@ -# -# lircmd config file for the animax remote control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_N -MOVE_N ANIMAX_MOUSE_PAD MOUSE_N - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NNE - -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NE - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_NEE -MOVE_NE ANIMAX_MOUSE_PAD MOUSE_NEE - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_E -MOVE_E ANIMAX_MOUSE_PAD MOUSE_E - -MOVE_E ANIMAX_MOUSE_PAD MOUSE_SEE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SEE - -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SE - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSE -MOVE_SE ANIMAX_MOUSE_PAD MOUSE_SSE - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_S -MOVE_S ANIMAX_MOUSE_PAD MOUSE_S - -MOVE_S ANIMAX_MOUSE_PAD MOUSE_SSW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SSW - -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SW - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_SWW -MOVE_SW ANIMAX_MOUSE_PAD MOUSE_SWW - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_W -MOVE_W ANIMAX_MOUSE_PAD MOUSE_W - -MOVE_W ANIMAX_MOUSE_PAD MOUSE_NWW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NWW - -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NW - -MOVE_N ANIMAX_MOUSE_PAD MOUSE_NNW -MOVE_NW ANIMAX_MOUSE_PAD MOUSE_NNW - - - -BUTTON1_TOGGLE ANIMAX LEFT_MOUSE_BUTTON_TOUCH_DOWN - -BUTTON1_DOWN ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_DOWN -BUTTON3_DOWN ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_DOWN - -BUTTON1_UP ANIMAX_MOUSE_BUTTONS RIGHT_MOUSE_BUTTON_UP -BUTTON3_UP ANIMAX_MOUSE_BUTTONS LEFT_MOUSE_BUTTON_UP - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg b/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/animax/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus b/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus deleted file mode 100644 index ceadbf0..0000000 --- a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.asus +++ /dev/null @@ -1,56 +0,0 @@ -# -# contributed by Tibor Sipos and -# Stefan Jahn -# -# brand: Asus -# model: Asus TV-Box Remote Control -# - -begin remote - - name Asus TV-Box IR - - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - gap 1399999 - toggle_bit 0 - - begin codes - 0 0x0000000000000000 - 1 0x0000000000000008 - 2 0x0000000000000010 - 3 0x0000000000000018 - 4 0x0000000000000020 - 5 0x0000000000000028 - 6 0x0000000000000030 - 7 0x0000000000000038 - 8 0x0000000000000040 - 9 0x0000000000000048 - PREV 0x0000000000000050 - ENTER 0x0000000000000058 - CH+ 0x0000000000000060 - CH- 0x0000000000000068 - VOL+ 0x0000000000000070 - VOL- 0x0000000000000078 - MAXIMIZE 0x0000000000000080 - MUTE 0x0000000000000088 - POWER 0x0000000000000090 - MENU 0x0000000000000098 - UP 0x00000000000000A0 - DOWN 0x00000000000000A8 - LEFT 0x00000000000000B0 - RIGHT 0x00000000000000B8 - CAPTION 0x00000000000000C0 - MTS/SAP 0x00000000000000C8 - DISPLAY 0x00000000000000D0 - SCAN 0x00000000000000D8 - RED 0x00000000000000E0 - GREEN 0x00000000000000E8 - YELLOW 0x00000000000000F0 - BLUE 0x00000000000000F8 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix b/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix deleted file mode 100644 index a6e9abd..0000000 --- a/abs/core-testing/live-installer/templates/remotes/asus/lircd.conf.digimatrix +++ /dev/null @@ -1,152 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre7(it87) on Sun Aug 29 17:33:17 2004 -# -# contributed by -# -# brand: ASUS -# model no. of remote control: DigiMatrix -# devices being controlled by this remote: -# - -begin remote - - name ASUS_DigiMatrix - bits 16 - flags SPACE_ENC - eps 30 - aeps 100 - - header 8057 4071 - one 479 1534 - zero 479 531 - ptrail 491 - pre_data_bits 8 - pre_data 0x35 - gap 25647 - toggle_bit 0 - - - begin codes - up 0x000000000000E817 - down 0x00000000000018E7 - enter 0x000000000000D02F - left 0x0000000000009867 - right 0x00000000000058A7 - 1 0x00000000000000FF - 2 0x000000000000807F - 3 0x00000000000040BF - 4 0x000000000000C03F - 5 0x00000000000020DF - 6 0x000000000000A05F - 7 0x000000000000609F - 8 0x000000000000E01F - 9 0x00000000000010EF - 0 0x000000000000906F - on_off 0x000000000000B04F - dvd_vcd 0x000000000000F00F - tv 0x00000000000008F7 - os_start 0x00000000000030CF - photo 0x00000000000048B7 - home 0x00000000000044BB - back 0x000000000000A857 - ch+ 0x000000000000B847 - stop 0x000000000000946B - play 0x000000000000C43B - vol+ 0x000000000000F807 - ch- 0x0000000000007887 - step- 0x000000000000E41B - step+ 0x000000000000649B - vol- 0x00000000000004FB - pause 0x00000000000024DB - pre 0x00000000000014EB - next 0x000000000000A45B - mute 0x000000000000847B - rec 0x000000000000D42B - subtitle 0x000000000000C837 - menu 0x00000000000038C7 - dvd_audio 0x00000000000050AF - ui_size 0x0000000000008877 - ui_on_off 0x00000000000028D7 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(it87) on Sun Aug 28 18:13:15 2005 -# -# contributed by -# -# brand: ASUS -# model no. of remote control: DigiMatrix Mark 2 -# devices being controlled by this remote: -# - -begin remote - - name ASUS_DigiMatrixMk2 - bits 8 - flags SPACE_ENC - eps 30 - aeps 100 - - header 2666 1378 - one 260 741 - zero 260 279 - ptrail 251 - pre_data_bits 1 - pre_data 0x0 - post_data_bits 8 - post_data 0x3 - gap 10826 - min_repeat 1 - toggle_bit 0 - - - begin codes - power 0x0000000000000084 - tv_dvr 0x0000000000000044 - fm 0x00000000000000C4 - os_start 0x0000000000000024 - music 0x00000000000000A4 - pictures 0x0000000000000064 - video 0x00000000000000E4 - dvd_menu 0x0000000000000014 - up 0x000000000000004C - down 0x00000000000000E0 - left 0x0000000000000010 - right 0x0000000000000040 - back 0x00000000000000B4 - ok 0x0000000000000088 - back_fwd 0x0000000000000074 - rew 0x0000000000000094 - play_pause 0x0000000000000054 - fwd 0x00000000000000D4 - step- 0x0000000000000098 - stop 0x0000000000000048 - step+ 0x0000000000000090 - vol+ 0x0000000000000058 - vol- 0x00000000000000D8 - home 0x00000000000000C8 - ch+ 0x0000000000000050 - ch- 0x00000000000000D0 - mute 0x0000000000000038 - rec 0x0000000000000028 - pc 0x0000000000000030 - 1 0x00000000000000B8 - 2 0x00000000000000A8 - 3 0x00000000000000B0 - 4 0x0000000000000078 - 5 0x0000000000000068 - 6 0x0000000000000070 - 7 0x00000000000000F8 - 8 0x00000000000000E8 - 9 0x00000000000000F0 - 0 0x0000000000000018 - ui_size 0x0000000000000004 - repeat 0x0000000000000008 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb b/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb deleted file mode 100644 index 4953bf2..0000000 --- a/abs/core-testing/live-installer/templates/remotes/atiusb/lircd.conf.atiusb +++ /dev/null @@ -1,1259 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Tue Apr 27 23:51:09 2004 -# -# contributed by Paul Miller -# -# brand: ATI Remote Wonder -# model no. of remote control: 5000015900A -# devices being controlled by this remote: ATI USB Receiver -# -# CHANNEL CODES -# To change your channel, hold the hand button down until the -# LED begins to blink. Then enter the channel number -# (1 through 16) and press the hand again. -# -# NOTE!! The lirc_atiusb driver now removes the channel code -# from key-codes (by default). This effectively outputs codes -# for remote channel 1. You can change this behavior by -# loading the module with unique=1. Type `modinfo lirc_atiusb` -# for details. - -begin remote - - name ATIUSB_5000015900A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139944 - toggle_bit 0 - - - begin codes - A 0x000000000000F500 - B 0x000000000000F601 - C 0x0000000000000E19 - D 0x000000000000101B - E 0x0000000000001621 - F 0x0000000000001823 - TV 0x000000000000F803 - DVD 0x000000000000F904 - WEB 0x000000000000FA05 - BOOK 0x000000000000FB06 - HAND 0x000000000000FC07 - POWER 0x000000000000F702 - MOUSE_LEFT_BTN 0x0000000000006D78 - MOUSE_RIGHT_BTN 0x000000000000717C - MOUSE_UP 0x0000000000006772 - MOUSE_DOWN 0x0000000000006B76 - MOUSE_LEFT 0x0000000000006C77 - MOUSE_RIGHT 0x0000000000006B76 - VOL_UP 0x000000000000FD08 - VOL_DOWN 0x000000000000FE09 - MUTE 0x000000000000FF0A - CH_UP 0x000000000000000B - CH_DOWN 0x000000000000010C - 1 0x000000000000020D - 2 0x000000000000030E - 3 0x000000000000040F - 4 0x0000000000000510 - 5 0x0000000000000611 - 6 0x0000000000000712 - 7 0x0000000000000813 - 8 0x0000000000000914 - 9 0x0000000000000A15 - 0 0x0000000000000C17 - LIST 0x0000000000000B16 - CHECK 0x0000000000000D18 - UP 0x0000000000000F1A - DOWN 0x0000000000001722 - LEFT 0x000000000000121D - RIGHT 0x000000000000141F - OK 0x000000000000131E - TIMER 0x000000000000111C - MAX 0x0000000000001520 - REWIND 0x0000000000001924 - PLAY 0x0000000000001A25 - FFWD 0x0000000000001B26 - REC 0x0000000000001C27 - STOP 0x0000000000001D28 - PAUSE 0x0000000000001E29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre1(atiusb) on Fri Nov 28 16:56:46 2003 -# -# contributed by Jason Piterak -# -# brand: ATI -# model no. of remote control: 5000022000 -# -# devices being controlled by this remote: -# MythTV PVR using knopmyth by Cecil and Dale at -# http://mysettopbox.tv -# Key map names are as per ATI's website: -# http://www.ati.com/support/connectors/remotecontrol/atiremotecontrolbutton=s.html -# Feel free to change them as you see fit :-) -# -# NOTE: There are 16 channels for this remote; this file only -# supports one channel. See the GATOS project for information -# on how to change the channel. Not tested. Unknown channel. -# -# also reported by Jeffrey Barnhill to work with model 5000023600 while -# the dedicated section below did not work - -begin remote - - name ATIUSB_5000022000 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0000 - gap 139891 - toggle_bit 0 - - - begin codes - a 0x000000000000C500 - b 0x000000000000C601 - power 0x000000000000C702 - tv 0x000000000000C803 - dvd 0x000000000000C904 - web 0x000000000000CA05 - media_library 0x000000000000CB06 - drag 0x000000000000CC07 - mouse-button_left 0x0000000000003D78 - mouse-button_right 0x000000000000417C - mouse-up 0x0000000000003772 - mouse-down 0x0000000000003873 - mouse-left 0x0000000000003570 - mouse-right 0x0000000000003671 - mouse-left_up 0x0000000000003974 - mouse-right_up 0x0000000000003A75 - mouse-left_down 0x0000000000003C77 - mouse-right_down 0x0000000000003B76 - vol-up 0x000000000000CD08 - vol-down 0x000000000000CE09 - mute 0x000000000000CF0A - chan-up 0x000000000000D00B - chan-down 0x000000000000D10C - 1 0x000000000000D20D - 2 0x000000000000D30E - 3 0x000000000000D40F - 4 0x000000000000D510 - 5 0x000000000000D611 - 6 0x000000000000D712 - 7 0x000000000000D813 - 8 0x000000000000D914 - 9 0x000000000000DA15 - 0 0x000000000000DC17 - dvd-root_menu 0x000000000000DB16 - launch_setup 0x000000000000DD18 - c 0x000000000000DE19 - d 0x000000000000E01B - tv_on_demand 0x000000000000E11C - max_window 0x000000000000E520 - cursor-up 0x000000000000DF1A - cursor-down 0x000000000000E722 - cursor-left 0x000000000000E21D - cursor-right 0x000000000000E41F - ok 0x000000000000E31E - e 0x000000000000E621 - f 0x000000000000E823 - rewind 0x000000000000E924 - play 0x000000000000EA25 - fast_forward 0x000000000000EB26 - record 0x000000000000EC27 - stop 0x000000000000ED28 - pause 0x000000000000EE29 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.7.0-CVS(atiusb) on Sat May 15 10:44:51 2004 -# -# contributed by Jurgen Kramer -# -# brand: ATI -# model no. of remote control: 5000023600 -# devices being controlled by this remote: MythTV 0.14 -# -# USB ID: 0bc7:0004 -# - -begin remote - - name ATIUSB_5000023600 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227972 - min_repeat 4 - toggle_bit 0 - - - begin codes - 1 0x000000000000920D - 2 0x000000000000930E - 3 0x000000000000940F - 4 0x0000000000009510 - 5 0x0000000000009611 - 6 0x0000000000009712 - 7 0x0000000000009813 - 8 0x0000000000009914 - 9 0x0000000000009A15 - a 0x0000000000008500 - b 0x0000000000008601 - power 0x0000000000008702 - tv 0x0000000000008803 - dvd 0x0000000000008904 - web 0x0000000000008A05 - media_library 0x0000000000008B06 - drag 0x0000000000008C07 - 0 0x0000000000009C17 - c 0x0000000000009E19 - d 0x000000000000A01B - mute 0x0000000000008F0A - tv_on_demand 0x000000000000A11C - max_window 0x000000000000A520 - e 0x000000000000A621 - f 0x000000000000A823 - ok 0x000000000000A31E - left 0x000000000000A21D - right 0x000000000000A41F - up 0x0000000000009F1A - down 0x000000000000A722 - rewind 0x000000000000A924 - play 0x000000000000AA25 - forward 0x000000000000AB26 - record 0x000000000000AC27 - stop 0x000000000000AD28 - pause 0x000000000000AE29 - mouse_button_left 0x000000000000FD78 - mouse_button_right 0x000000000000017C - vol-down 0x0000000000008E09 - vol-up 0x0000000000008D08 - chan-down 0x000000000000910C - chan-up 0x000000000000900B - mouse-up 0x000000000000F772 - mouse-down 0x000000000000F873 - mouse-left 0x000000000000F570 - mouse-right 0x000000000000F671 - mouse-left_up 0x000000000000F974 - mouse-left_down 0x000000000000FC77 - mouse-right_up 0x000000000000FA75 - mouse-right_down 0x000000000000FB76 - dvd-root_menu 0x0000000000009B16 - launch_setup 0x0000000000009D18 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Tue Mar 29 17:33:06 2005 -# -# contributed by Raphaël Doursenaud (rdoursenaud@free.fr) -# -# brand: Sapphire (ATI) -# model no. of remote control: 5000023600 -# devices being controlled by this remote: xmms, tvtime -# - -begin remote - - name SAPPHIRE_ATIUSB_5000023600 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227990 - toggle_bit 0 - - - begin codes - 1 0x00000014E20D0000 - 2 0x00000014E30E0000 - 3 0x00000014E40F0000 - 4 0x00000014E5100000 - 5 0x00000014E6110000 - 6 0x00000014E7120000 - 7 0x00000014E8130000 - 8 0x00000014E9140000 - 9 0x00000014EA150000 - a 0x00000014D5000000 - b 0x00000014D6010000 - power 0x00000014D7020000 - tv 0x00000014D8030000 - dvd 0x00000014D9040000 - web 0x00000014DA050000 - media_library 0x00000014DB060000 - drag 0x00000014DC070000 - 0 0x00000014EC170000 - c 0x00000014EE190000 - d 0x00000014F01B0000 - mute 0x00000014DF0A0000 - tv_on_demand 0x00000014F11C0000 - max_window 0x00000014F5200000 - e 0x00000014F6210000 - f 0x00000014F8230000 - ok 0x00000014F31E0000 - left 0x00000014F21D0000 - right 0x00000014F41F0000 - up 0x00000014EF1A0000 - down 0x00000014F7220000 - rewind 0x00000014F9240000 - play 0x00000014FA250000 - forward 0x00000014FB260000 - record 0x00000014FC270000 - stop 0x00000014FD280000 - pause 0x00000014FE290000 - mouse_button_left 0x000000144D780000 - mouse_button_right 0x00000014517C0000 - vol-down 0x00000014DE090000 - vol-up 0x00000014DD080000 - chan-down 0x00000014E10C0000 - chan-up 0x00000014E00B0000 - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-left_up 0x0000001449740000 - mouse-left_down 0x000000144C770000 - mouse-right_up 0x000000144A750000 - mouse-right_down 0x000000144B760000 - dvd-root_menu 0x00000014EB160000 - launch_setup 0x00000014ED180000 - end codes - -end remote - - -# lircd.conf for X-10 Lola remote -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Sat May 15 14:41:38 2004 -# matching MythTV configuration file at http://wendy.seltzer.org/mythtv/lircrc -# -# -# brand: X-10 Lola -# model no. of remote control: UR89A -# devices being controlled by this remote: mythtv -# - -begin remote - - name X-10_Lola - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219972 - toggle_bit 0 - - - begin codes - up 0x000000000000600B - down 0x000000000000610C - left 0x0000000000005D08 - right 0x0000000000005E09 - M 0x0000000000005F0A - 1 0x000000000000620D - 2 0x000000000000630E - 3 0x000000000000640F - 4 0x0000000000006510 - 5 0x0000000000006611 - 6 0x0000000000006712 - 7 0x0000000000006813 - 8 0x0000000000006914 - 9 0x0000000000006A15 - 0 0x0000000000006C17 - a-d 0x0000000000006B16 - a-b 0x0000000000006D18 - pageup 0x000000000000711C - pagedown 0x0000000000007520 - T 0x000000000000832E - E 0x000000000000842F - F 0x0000000000005C07 - S 0x0000000000008530 - scan- 0x000000000000802B - rew 0x0000000000007924 - play 0x0000000000007A25 - ff 0x0000000000007B26 - scan+ 0x0000000000007F2A - rec 0x0000000000007C27 - stop 0x0000000000007D28 - pause 0x0000000000007E29 - playlist 0x0000000000005601 - playing 0x000000000000822D - enter 0x000000000000731E - eu 0x0000000000006F1A - ed 0x0000000000007722 - el 0x000000000000721D - er 0x000000000000741F - alb 0x0000000000006E19 - art 0x000000000000701B - gen 0x0000000000007621 - trk 0x0000000000007823 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre6(atiusb) on Fri Jul 9 10:08:10 2004 -# -# contributed by Julien Damon -# -# brand: microapp6in1 -# see http://www.microapp.com/fiche_produit.cfm?ref_produit=4184 -# distributed in France -# model no. of remote control: 4184(UR86E) -# devices being controlled by this remote: - -# -# sold by Pearl as Q-Sonic Master Remote 6in1 PC -# - -begin remote - - name microapp6in1 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203993 - toggle_bit 0 - - - begin codes - num_1 0x00000020EE11820D - num_2 0x00000020EE11420D - num_3 0x00000020EE11C20D - num_4 0x00000020EE11220D - num_5 0x00000020EE11A20D - num_6 0x00000020EE11620D - num_7 0x00000020EE11E20D - num_8 0x00000020EE11120D - num_9 0x00000020EE11920D - num_0 0x00000020EE11020D - AV 0x00000020EE11BA05 - ok 0x00000020EE11520D - up 0x00000020EE11D50A - left 0x00000020EE11D20D - right 0x00000020EE11D10E - down 0x00000020EE11D30C - exit 0x00000020EE11C906 - menu 0x00000020EE11B609 - mute 0x00000020EE11A00F - vol+ 0x00000020EE11600F - vol- 0x00000020EE11E00F - ch+ 0x00000020EE11400F - ch- 0x00000020EE11C00F - hand 0x00000014307B0000 - skip_left 0x00000020EE113A05 - skip_right 0x00000020EE11D807 - play 0x00000020EE11B00F - backward 0x00000020EE113807 - forward 0x00000020EE11B807 - pause 0x00000020EE11720D - stop 0x00000020EE11FF00 - record 0x00000020EE11700F - clic_left 0x000000142D780000 - clic_right 0x00000014317C0000 - mouse_up 0x0000001427720000 - mouse_down 0x0000001428730000 - mouse_right 0x0000001426710000 - mouse_left 0x0000001425700000 - mouse_up_right 0x000000142A750000 - mouse_down_right 0x000000142B760000 - mouse_up_left 0x0000001429740000 - mouse_down_left 0x000000142C770000 - power 0x00000020EE11F00F -# additional codes reported by Daniel Beyer for Q-Sonic Master Remote 6in1 PC - leftbtn_up 0x000000142e790000 - rightbtn_up 0x00000014327d0000 - pc 0x00000020ee11d40b - - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0pre7(atiusb) on Tue Aug 31 21:16:31 2004 -# -# contributed by Martin Tomasek -# -# brand: ATI Remote Wonder -# model no. of remote control: -# devices being controlled by this remote: ATI USB Receiver (X10). -# -# * remote is set to channel 1, driver reports channel 16. don't know -# which is true. - -# -# P: Vendor=0bc7 ProdID=0004 Rev= 1.00 -# S: Manufacturer=X10 Wireless Technology Inc -# S: Product=USB Receiver -# - -begin remote - - name atiusb_ch1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 227933 - toggle_bit 0 - - - begin codes - A 0x000000000000D500 - B 0x000000000000D601 - C 0x000000000000EE19 - D 0x000000000000F01B - E 0x000000000000F621 - F 0x000000000000F823 - POWER 0x000000000000D702 - TV 0x000000000000D803 - DVD 0x000000000000D904 - WEB 0x000000000000DA05 - BOOK 0x000000000000DB06 - HAND 0x000000000000DC07 - MOUSE_LEFT_BTN 0x0000000000004D78 - MOUSE_RIGHT_BTN 0x000000000000517C - MOUSE_LEFT 0x0000000000004570 - MOUSE_RIGHT 0x0000000000004671 - MOUSE_UP 0x0000000000004772 - MOUSE_DOWN 0x0000000000004873 - VOL_UP 0x000000000000DD08 - VOL_DOWN 0x000000000000DE09 - MUTE 0x000000000000DF0A - CH_UP 0x000000000000E00B - CH_DOWN 0x000000000000E10C - 1 0x000000000000E20D - 2 0x000000000000E30E - 3 0x000000000000E40F - 4 0x000000000000E510 - 5 0x000000000000E611 - 6 0x000000000000E712 - 7 0x000000000000E813 - 8 0x000000000000E914 - 9 0x000000000000EA15 - 0 0x000000000000EC17 - LIST 0x000000000000EB16 - CHECK 0x000000000000ED18 - UP 0x000000000000EF1A - DOWN 0x000000000000F722 - LEFT 0x000000000000F21D - RIGHT 0x000000000000F41F - OK 0x000000000000F31E - TIMER 0x000000000000F11C - MAXIMIZE 0x000000000000F520 - REW 0x000000000000F924 - FFWD 0x000000000000FB26 - PLAY 0x000000000000FA25 - STOP 0x000000000000FD28 - RECORD 0x000000000000FC27 - PAUSE 0x000000000000FE29 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0pre4(atiusb) on Tue Nov 9 12:37:00 2004 -# -# contributed by Phil Speights -# -# brand: nvidia -# model no. of remote control: UR88A -# devices being controlled by this remote: nvidia personal cinema -# - -begin remote - - name ATIUSB_UR88A - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 243948 - toggle_bit 0 - - - begin codes - mouse-up 0x4A75 - mouse-right_up 0x4A75 - mouse-right 0x4671 - mouse-right_down 0x4B76 - mouse-down 0x4B76 - mouse-left_down 0x4873 - mouse-left 0x4C77 - mouse-left_up 0x4772 - esc 0xDF0A - mouse-button_left 0x4D78 - mouse-button_right 0x517C - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - 0 0xEC17 - stop 0xFD28 - play 0xFA25 - fastfoward 0xFB26 - rewind 0xF924 - pause 0xFE29 - record 0xFC27 - previous 0xF621 - next 0xF823 - up 0xEF1A - down 0xF722 - right 0xF41F - left 0xF21D - web 0xDC07 - music 0xDB06 - photo 0xDA05 - dvd/vcd 0xD904 - dvr 0xD803 - mute 0xD500 - playlist 0xD601 - chsurf 0xD702 - dvdmenu 0xEE19 - txt 0xEB16 - snapshots 0xED18 - setup 0xF01B - audio 0xF11C - slow 0xF520 - ok 0xF31E - vol+ 0xDE09 - vol- 0xDD08 - chan- 0xE10C - chan+ 0xE00B - zoom 0xFF2A - angle 0x002B - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sun Jan 23 11:18:36 2005 -# -# contributed by Dirk Aust -# -# brand: Medion, Made by X10, China -# Remote P/N: 20016398 -# Receiver P/N: 20016397 -# -# bundled with bundled with Titanium TD8008 and TD8080 Aldi PC - -begin remote - - name Medion - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 139873 - toggle_bit 0 - - - begin codes - TV 0x012C - VCR 0x022D - DVD 0xD904 - MUSIC 0xDB06 - RADIO 0x032E - PHOTO 0xDA05 - TV_PREVIEW 0x042F - CHANNEL_LIST 0x0530 - SETUP 0xF01B - VIDEO_DESKTOP 0x0631 - CHAN+ 0xE00B - VOL- 0xDD08 - MUTE 0xD500 - VOL+ 0xDE09 - CHAN- 0xE10C - RED 0x0732 - GREEN 0x0833 - YELLOW 0x0934 - BLUE 0x0A35 - TXT 0xEB16 - 1 0xE20D - 2 0xE30E - 3 0xE40F - 4 0xE510 - 5 0xE611 - 6 0xE712 - 7 0xE813 - 8 0xE914 - 9 0xEA15 - TV/RADIO 0xF11C - 0 0xEC17 - DELETE 0xF520 - RENAME 0x0B36 - SNAPSHOT 0xED18 - UP 0xEF1A - LEFT 0xF21D - OK 0xF31E - RIGHT 0xF41F - DOWN 0xF722 - ACQ_IMAGE 0x0C37 - EDIT_IMAGE 0x0D38 - REW 0xF924 - PLAY 0xFA25 - FFW 0xFB26 - RECORD 0xFC27 - STOP 0xFD28 - PAUSE 0xFE29 - PREV 0xF621 - FULL 0x0E39 - NEXT 0xF823 - DVD_MENU 0xEE19 - DVD_AUDIO 0x0F3A - POWER 0xD702 - end codes - -end remote - - -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Sat Feb 12 13:22:29 2005 -# -# contributed by Steffen -# -# brand: ATI Sapphire Remote Bob II USB -# model no. of remote control: 5000024400 -# devices being controlled by this remote: ASUS Digimatrix MythTV PVR -# - -begin remote - - name 5000024400 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x0 - post_data_bits 16 - post_data 0x0 - gap 299851 - toggle_bit 0 - - - begin codes - aux1 0x023F - aux2 0x023F - aux3 0x023F - aux4 0x023F - leftmouse 0x02A9 - rightmouse 0x02AA - a 0x0278 - b 0x0279 - power 0x020C - dvd 0x0238 - tv 0x0239 - help 0x02BE - pc 0x023F - resize 0x02D5 - hand 0x02D0 - ati 0x028E - vol-up 0x0210 - vol-down 0x0211 - mute 0x020D - chan-up 0x0220 - chan-down 0x0221 - mouse-up 0x013F - mouse-down 0x013F - mouse-left 0x013F - mouse-right 0x013F - 1 0x0201 - 2 0x0202 - 3 0x0203 - 4 0x0204 - 5 0x0205 - 6 0x0206 - 7 0x0207 - 8 0x0208 - 9 0x0209 - 0 0x0200 - list 0x0254 - check 0x0282 - info 0x02F9 - timer 0x0296 - up 0x0258 - left 0x025A - right 0x025B - down 0x0259 - ok 0x025C - c 0x017A - d 0x027B - play 0x022C - e 0x027C - f 0x027D - rewind 0x0229 - rec 0x0237 - stop 0x0231 - pause 0x0230 - ffwd 0x0228 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Jan 16 14:58:13 2005 -# -# contributed by -# -# brand: Niveus -# model no. of remote control: -# devices being controlled by this remote: Niveus X10 -# - -begin remote - - name Niveus_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 203974 - toggle_bit 0 - - - begin codes - power 0x00000020EE11F00F - mouse-up 0x0000001447720000 - mouse-down 0x0000001448730000 - mouse-left 0x0000001445700000 - mouse-right 0x0000001446710000 - mouse-up-left 0x0000001449740000 - mouse-up-right 0x000000144A750000 - mouse-down-left 0x000000144C770000 - mouse-down-right 0x000000144B760000 - mouse-left-click 0x000000144D780000 - mouse-right-click 0x00000014517C0000 - mouse-drag 0x00000014507B0000 - vol- 0x00000020EE01E00F - vol+ 0x00000020EE81600F - ch- 0x00000020EEE1C00F - ch+ 0x00000020EE61400F - mute 0x00000020EEC1A00F - 1 0x00000020EEA1820D - 2 0x00000020EE61420D - 3 0x00000020EEE1C20D - 4 0x00000020EE41220D - 5 0x00000020EEC1A20D - 6 0x00000020EE81620D - 7 0x00000020EE01E20D - 8 0x00000020EE31120D - 9 0x00000020EEB1920D - ent 0x00000020EE71520D - 0 0x00000020EE21020D - a-b 0x00000020EED1BA05 - a 0x00000020EE513A05 - b 0x00000020EEF1D807 - c 0x00000020EEF1D609 - d 0x00000020EEF1D906 - menu 0x00000020EED1B609 - exit 0x00000020EEE1C906 - up 0x00000020EEF1D50A - down 0x00000020EEF1D30C - left 0x00000020EEF1D20D - right 0x00000020EEF1D10E - ok 0x00000020EE71520D - rew 0x00000020EE513807 - play 0x00000020EED1B00F - ff 0x00000020EED1B807 - rec 0x00000020EE11FF00 - stop 0x00000020EE91700F - pause 0x00000020EE91720D - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Mon Aug 22 22:40:10 2005 -# -# contributed by -# -# brand: Medion -# model no. of remote control: MD1 NBC remote -# devices being controlled by this remote: Medion MD95700 usb dvb/analog tuner with atiusb -# - -begin remote - - name Medion_MD1 - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 219994 - min_repeat 27 - toggle_bit 0 - - - begin codes - Power 0x000000000000D702 - TV 0x000000000000012C - Video 0x00000000000082AD - CD/DVD 0x000000000000D904 - Teletext 0x0000000000006B96 - Audio 0x000000000000DB06 - Radio 0x00000000000083AE - Page 0x0000000000000631 - Photo 0x0000000000005A85 - Info 0x000000000000042F - Menu 0x0000000000006E99 - Back 0x000000000000F520 - Wheel_Up 0x000000000000CDF8 - Wheel_Down 0x000000000000C7F2 - Wheel_Left 0x000000000000F21D - Wheel_Right 0x000000000000749F - Wheel_Click 0x000000000000F31E - Vol+ 0x000000000000DE09 - Vol- 0x0000000000005D88 - Mute 0x000000000000D500 - Program+ 0x000000000000608B - Program- 0x000000000000E10C - Prog_Switch 0x000000000000719C - Select 0x000000000000F01B - Red 0x00000000000087B2 - Green 0x0000000000000833 - Yellow 0x00000000000089B4 - Blue 0x0000000000000A35 - Stop 0x0000000000007DA8 - Pause 0x000000000000FE29 - Play 0x0000000000007AA5 - Skip_Left 0x000000000000F621 - Camera 0x0000000000006D98 - Skip_Right 0x000000000000F823 - Fast_Reverse 0x00000000000079A4 - Fast_Forward 0x000000000000FB26 - 1 0x000000000000628D - 2 0x000000000000E30E - 3 0x000000000000648F - 4 0x000000000000E510 - 5 0x0000000000006691 - 6 0x000000000000E712 - 7 0x0000000000006893 - 8 0x000000000000E914 - 9 0x0000000000006A95 - 0 0x000000000000EC17 - Record 0x000000000000FC27 - end codes - -end remote - - - -# -# this config file was automatically generated -# using lirc-0.7.0(atiusb) on Tue Nov 22 15:41:40 2005 -# -# contributed by a_matteur -# -# brand: MEDION X10 RF -# model no. of remote control: remote P/N:20014752, receiver P/N:20014751 -# devices being controlled by this remote: -# - -begin remote - - name MEDION_X10_RF - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x14 - post_data_bits 16 - post_data 0x0 - gap 235923 - toggle_bit 0 - - - begin codes - tv 0x012C - vcr 0x022D - dvd 0x0904 - music 0x0B06 - radio 0x032E - photo 0x0A05 - tvpreview 0x042F - channellist 0x0530 - setup 0x001B - videodesktop 0x0631 - ch+ 0x000B - ch- 0x010C - vol+ 0x0E09 - vol- 0x0D08 - mute 0x0500 - red 0x0732 - green 0x0833 - yellow 0x0934 - blue 0x0A35 - txt 0x0B16 - 0 0x0C17 - 1 0x020D - 2 0x030E - 3 0x040F - 4 0x0510 - 5 0x0611 - 6 0x0712 - 7 0x0813 - 8 0x0914 - 9 0x0A15 - tvradio 0x011C - delete 0x0520 - rename 0x0B36 - snapshot 0x0D18 - up 0x0F1A - down 0x0722 - left 0x021D - right 0x041F - ok 0x031E - acquireimage 0x0C37 - editimage 0x0D38 - play 0x0A25 - pause 0x0E29 - stop 0x0D28 - forward 0x0B26 - rewind 0x0924 - next 0x0823 - prev 0x0621 - record 0x0C27 - fullscreen 0x0E39 - dvdmenu 0x0E19 - dvdaudio 0x0F3A - power 0x0702 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(atiusb) on Wed Dec 21 18:36:45 2005 -# -# contributed by: Peter J. Weyers -# -# brand: MEDION / ATI -# model no. of remote control: 40005927 -# devices being controlled by this remote: -# -# This is an USB attached reciever wich works by radio, not by IR. It is -# most probably a relabeled ATI X10 device and sold together with the -# Medion Notebook MD41300. It works with the lirc_atiusb driver while the -# ati_remote module is NOT(!) loaded - -begin remote - - name MEDION_40005927 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 227972 - toggle_bit 0 - - - begin codes - TV_DVD 0x1481AC0000 - VIDEO 0x1482AD0000 - PHOTO 0x1459840000 - MUSIC 0x145B860000 - PC 0x1483AE0000 - MUTE 0x1455800000 - OK 0x14739E0000 - UP 0x146F9A0000 - DOWN 0x1477A20000 - LEFT 0x14729D0000 - RIGHT 0x14749F0000 - CH+ 0x145E890000 - CH- 0x145D880000 - VOL+ 0x14608B0000 - VOL- 0x14618C0000 - PLAY_PAUSE 0x147AA50000 - RECORD 0x147CA70000 - STOP 0x147DA80000 - FRWND 0x1479A40000 - FFWD 0x147BA60000 - PREV 0x1476A10000 - NEXT 0x1478A30000 - 1 0x14628D0000 - 2 0x14638E0000 - 3 0x14648F0000 - 4 0x1465900000 - 5 0x1466910000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x1469940000 - 9 0x146A950000 - 0 0x146C970000 - RC 0x1484AF0000 - Screen_Symbol 0x146B960000 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.2(any) on Mon Jan 16 13:13:31 2006 -# -# contributed by -# -# brand: Medion USB Remote Control X10 -# model no. of remote control: 40009936 -# devices being controlled by this remote: -# - -begin remote - - name Medion_X10 - bits 40 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 219969 - toggle_bit 0 - - - begin codes - off 0x14D7020000 - tv 0x14012C0000 - video 0x1482AD0000 - dvd 0x14D9040000 - vt 0x146B960000 - audio 0x14DB060000 - radio 0x1483AE0000 - book 0x1406310000 - photo 0x145A850000 - info 0x14042F0000 - 0 0x146C970000 - 1 0x14E20D0000 - 2 0x14638E0000 - 3 0x14E40F0000 - 4 0x1465900000 - 5 0x14E6110000 - 6 0x1467920000 - 7 0x1468930000 - 8 0x14E9140000 - 9 0x146A950000 - ok 0x14F31E0000 - up 0x14CDF80000 - down 0x1446710000 - left 0x14F21D0000 - right 0x14749F0000 - menu 0x14EE190000 - back 0x1475A00000 - red 0x1407320000 - green 0x1488B30000 - yellow 0x1409340000 - blue 0x148AB50000 - mute 0x14D5000000 - ch+ 0x14608B0000 - ch- 0x14E10C0000 - vol+ 0x145E890000 - vol- 0x14DD080000 - switch 0x14719C0000 - stop 0x14FD280000 - pause 0x147EA90000 - play 0x14FA250000 - reward 0x1476A10000 - forward 0x14F8230000 - skipr 0x1479A40000 - skipf 0x14FB260000 - rec 0x147CA70000 - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia deleted file mode 100644 index 7091aa4..0000000 --- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia +++ /dev/null @@ -1,72 +0,0 @@ -# -# This is for the remote that Avermedia bundles with its TVCapture and -# TVPhone, the classic ones (pre 98). -# Commands from the remote are hardware-decoded by a PIC16c54-xt, which makes -# lirc's job easy. You need at least lirc-0.6.3 to use this config file -# -# this config file was automatically generated -# using lirc-0.6.3 on Wed Jan 10 19:31:20 2001 -# -# contributed by Santiago Garcia Mantinan -# -# brand: Avermedia -# model: TVCapture & TVPhone, the classic ones (pre 98) -# supported devices: This remote control comes with some TV Tuner cards from -# Avermedia. - -begin remote - - name Avermedia - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8984 4527 - one 568 1681 - zero 568 558 - ptrail 547 - repeat 8985 2276 - pre_data_bits 16 - pre_data 0x2FD - gap 108069 - toggle_bit 0 - - - begin codes - TV 0x0000000000006897 - FM 0x000000000000A857 - EXIT 0x00000000000048B7 - DISPLAY 0x00000000000030CF - FREEZE 0x00000000000028D7 - CAPTURE 0x0000000000008877 - VIDEO 0x00000000000038C7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - AUDIO 0x00000000000018E7 - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - FULLSCREEN 0x000000000000F00F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - LOOP 0x000000000000C837 - 0 0x00000000000050AF - LEFTARROW 0x00000000000000FF - RIGHTARROW 0x000000000000E817 - MUTE 0x00000000000008F7 - COLOR 0x000000000000B04F - PREVIEW 0x000000000000708F - CHANNELUP 0x000000000000D827 - VOL_UP 0x00000000000058A7 - AUTOSCAN 0x000000000000B847 - ENTER 0x0000000000009867 - CHANNELDOWN 0x000000000000F807 - VOL_DOWN 0x0000000000007887 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98 b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98 deleted file mode 100644 index f60ee50..0000000 --- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.avermedia98 +++ /dev/null @@ -1,175 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5 on Thu May 25 18:00:24 2000 -# -# contributed by Michal Kochanowicz & Jesus Bravo Alvarez -# -# brand: AVerMedia -# model: ? -# supported devices: some TVCapture98 (ID 0x00021461) and -# some TVPhone98 (ID 0x00011461) cards - -begin remote - - name TVCapture98 - bits 6 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 -# pre_data_bits 16 -# pre_data 0x40BF - repeat 9080 2189 - gap 108056 - repeat_bit 0 - - begin codes - TV/FM 0x0000000000000023 - CD 0x0000000000000022 -# TELETEXT 0x000000000000C03F - POWER 0x0000000000000027 - - 1 0x0000000000000018 - 2 0x0000000000000010 - 3 0x0000000000000008 - VIDEO 0x0000000000000000 - - 4 0x0000000000000019 - 5 0x0000000000000011 - 6 0x0000000000000009 - AUDIO 0x0000000000000001 - - 7 0x000000000000001A - 8 0x0000000000000012 - 9 0x000000000000000A - FULLSCREEN 0x0000000000000002 - - 0 0x000000000000001B - DISPLAY 0x0000000000000013 - COLOR 0x000000000000000B - LOOP 0x0000000000000003 - - UNLABELED 0x000000000000001C - LEFT 0x0000000000000014 - RIGHT 0x000000000000000C - PREVIEW 0x0000000000000004 - - AUTOSCAN 0x000000000000001D - FREEZE 0x0000000000000015 - CAPTURE 0x000000000000000D - MUTE 0x0000000000000005 - - RED 0x000000000000001E - VOL_DOWN 0x0000000000000016 - VOL_UP 0x000000000000000E - YELLOW 0x0000000000000006 - - GREEN 0x000000000000001F - CH_DOWN 0x0000000000000017 - CH_UP 0x000000000000000F - BLUE 0x0000000000000007 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.6.1 on Tue Apr 25 14:31:21 2000 -# -# contributed by Christoph Bartelmus -# -# brand: AVerMedia -# model: ? (36 buttons) -# supported devices: TVPhone98 card (ID 0x00031461) -# TVCapture98 card (ID 0x00041461) -# -# This config file does work with both homebrew receivers and -# original AVerMedia TV cards !!! -# - -begin remote - - name TVPhone98 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0x40BF - gap 108056 - repeat_bit 0 - - begin codes - POWER 0x00000000000000FF - TV/FM 0x000000000000807F - CD 0x00000000000040BF - TELETEXT 0x000000000000C03F - VIDEO 0x00000000000020DF - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - AUDIO 0x00000000000010EF - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - FULLSCREEN 0x00000000000030CF - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - - PREVIEW 0x00000000000008F7 - 0 0x0000000000008877 - DISPLAY 0x00000000000048B7 - LOOP 0x000000000000C837 - MUTE 0x00000000000028D7 - AUTOSCAN 0x000000000000A857 - FREEZE 0x0000000000006897 - CAPTURE 0x000000000000E817 - PLAY 0x00000000000018E7 - RECORD 0x0000000000009867 - PAUSE 0x00000000000058A7 - STOP 0x000000000000D827 - YELLOW 0x00000000000038C7 - RED 0x000000000000B847 - VOL_DOWN 0x0000000000007887 - VOL_UP 0x000000000000F807 - end codes - -end remote - -begin remote - - name TVPhone98_ext - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9078 4437 - one 615 1631 - zero 615 515 - ptrail 620 - repeat 9080 2189 - pre_data_bits 16 - pre_data 0xC03F - gap 108056 - repeat_bit 0 - - begin codes - BLUE 0x00000000000000FF - GREEN 0x000000000000807F - CH_DOWN 0x00000000000040BF - CH_UP 0x000000000000C03F - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate b/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate deleted file mode 100644 index 36b1c6b..0000000 --- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircd.conf.vdomate +++ /dev/null @@ -1,61 +0,0 @@ -# -# this config file was automatically generated -# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Oct 06 07:28:36 2002 -# -# contributed by -# -# brand: AVerMedia -# model: -# supported devices: VDOMATE (ID 0x3001461) -# - -begin remote - - name hanircd - bits 32 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9086 4425 - one 625 1624 - zero 625 500 - ptrail 624 - repeat 9087 2185 - gap 107977 - toggle_bit 0 - - - begin codes - power 0x0000000040BF00FF - one 0x0000000040BFA05F - two 0x0000000040BF609F - three 0x0000000040BFE01F - four 0x0000000040BF906F - five 0x0000000040BF50AF - six 0x0000000040BFD02F - seven 0x0000000040BFB04F - eight 0x0000000040BF708F - nine 0x0000000040BFF00F - zero 0x0000000040BF8877 - video 0x0000000040BF20DF - fullscreen 0x0000000040BF30CF - display 0x0000000040BF48B7 - color 0x0000000040BFC837 - loop 0x0000000040BF08F7 - coloup 0x0000000040BF6897 - colordn 0x0000000040BFE817 - preview 0x0000000040BF28D7 - autoscan 0x0000000040BF9867 - freeze 0x0000000040BF58A7 - capture 0x0000000040BFD827 - mute 0x0000000040BF18E7 - volumeup 0x0000000040BF7887 - volumedown 0x0000000040BFF807 - chnldown 0x00000000C03F40BF - chnlup 0x00000000C03FC03F - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia b/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia deleted file mode 100644 index e950862..0000000 --- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -#PROTOCOL IntelliMouse -PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * FM - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOLUP -MOVE_OUT * VOLDOWN - -BUTTON1_CLICK * DISPLAY -BUTTON2_CLICK * FREEZE -BUTTON3_CLICK * CAPTURE - -BUTTON1_TOGGLE * AUDIO -BUTTON2_TOGGLE * FULLSCREEN -BUTTON3_TOGGLE * LOOP diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98 b/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98 deleted file mode 100644 index 2885372..0000000 --- a/abs/core-testing/live-installer/templates/remotes/avermedia/lircmd.conf.avermedia98 +++ /dev/null @@ -1,37 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -# ACTIVATE * MENUE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_UP -MOVE_OUT * VOL_DOWN - -BUTTON1_DOWN * 5 -BUTTON1_UP * 0 - -BUTTON1_DOWN * TV/FM -BUTTON2_DOWN * CD -BUTTON3_DOWN * TELETEXT -BUTTON1_CLICK * DISPLAY -BUTTON3_CLICK * LOOP - -BUTTON1_TOGGLE * VIDEO -BUTTON2_TOGGLE * AUDIO -BUTTON3_TOGGLE * FULLSCREEN diff --git a/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg b/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/avermedia/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy deleted file mode 100644 index 1fd689f..0000000 --- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy +++ /dev/null @@ -1,63 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Sat Jan 6 20:54:24 2001 -# -# contributed by Miguel Angel Alvarez -# -# brand: BESTBUY -# model: Easy TV (BT848) -# supported devices: -# - -begin remote - - name BESTBUY - bits 5 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 3 - pre_data 0x0 -# gap 149990 - gap 199989 - toggle_bit 2 - - - begin codes - 0 0x0000000000000000 - 1 0x0000000000000001 - 2 0x0000000000000002 - 3 0x0000000000000003 - 4 0x0000000000000004 - 5 0x0000000000000005 - 6 0x0000000000000006 - 7 0x0000000000000007 - 8 0x0000000000000008 - 9 0x0000000000000009 - TV 0x000000000000001C - POWER 0x0000000000000012 - VIDEO 0x0000000000000011 - PREVIEW 0x000000000000000F - MUTE 0x0000000000000013 - SCAN 0x0000000000000010 - CHANNEL_UP 0x000000000000001A - CHANNEL_DOWN 0x000000000000001E - VOL_UP 0x000000000000001B - VOL_DOWN 0x000000000000001F - LOOP 0x000000000000000A - 100 0x0000000000000017 - ZOOM 0x000000000000000D - RECORD 0x000000000000000E - STOP 0x000000000000001D - PLAY 0x0000000000000019 - FREEZE 0x0000000000000016 - COLOR 0x0000000000000014 - LEFT 0x0000000000000018 - RIGHT 0x000000000000000C - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2 b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2 deleted file mode 100644 index 77e87e3..0000000 --- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircd.conf.bestbuy2 +++ /dev/null @@ -1,59 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3(bestbuy2) on Mon Apr 16 19:31:28 2001 -# -# contributed by Miguel Angel Alvarez -# -# brand: BESTBUY -# model: EASY TV (BT878) -# supported devices: -# - -begin remote - - name BESTBUY - bits 7 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 1 - pre_data 0x0 - gap 199981 - toggle_bit 0 - - - begin codes - TV/FM 0x0000000000000043 - SCAN 0x0000000000000047 - ZOOM 0x000000000000005C - POWER 0x000000000000005E - 1 0x0000000000000041 - 2 0x000000000000004B - 3 0x000000000000005B - VOL+ 0x000000000000005F - 4 0x0000000000000045 - 5 0x0000000000000049 - 6 0x0000000000000055 - VOL- 0x0000000000000057 - 7 0x0000000000000046 - 8 0x000000000000004A - 9 0x0000000000000052 - CH+ 0x0000000000000056 - 0 0x0000000000000042 - LOOP 0x0000000000000053 - +100 0x0000000000000050 - CH- 0x0000000000000054 - SOURCE 0x0000000000000040 - MUTE 0x0000000000000058 - - 0x0000000000000044 - FUNCTION 0x000000000000004E - + 0x000000000000004C - RESET 0x000000000000004D - FREEZE 0x000000000000004F - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy deleted file mode 100644 index e57d11f..0000000 --- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CHANNEL_UP -MOVE_OUT * CHANNEL_DOWN - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * ZOOM -BUTTON2_TOGGLE * RECORD -BUTTON3_TOGGLE * STOP - -BUTTON1_CLICK * POWER -BUTTON2_CLICK * TV -BUTTON3_CLICK * SCAN - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2 b/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2 deleted file mode 100644 index c515058..0000000 --- a/abs/core-testing/live-installer/templates/remotes/bestbuy/lircmd.conf.bestbuy2 +++ /dev/null @@ -1,34 +0,0 @@ -# -# lircmd config file -# - -#PROTOCOL IntelliMouse -PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * PLAY - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * FUNCTION -BUTTON2_TOGGLE * - -BUTTON3_TOGGLE * + - -BUTTON1_CLICK * TV/FM -BUTTON2_CLICK * SCAN -BUTTON3_CLICK * ZOOM - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca b/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca deleted file mode 100644 index c1a0fa1..0000000 --- a/abs/core-testing/live-installer/templates/remotes/caraca/lircd.conf.caraca +++ /dev/null @@ -1,46 +0,0 @@ -# -# -# contributed by Konrad Riedel -# -# brand: CARACA -# model: RC5 Remote Control -# -# supported devices: -# CARACA nodes - see http://caraca.sourceforge.net -# first byte: node address -# 2nd byte: ir code -# - -begin remote - - name Caraca - bits 16 - - begin codes - POWER 0x3ff3 - 1 0x3ffe - 2 0x3ffd - 3 0x3ffc - 4 0x3ffb - 5 0x3ffa - 6 0x3ff9 - 7 0x3ff8 - 8 0x3ff7 - 9 0x3ff6 - 0 0x3ff5 - PAUSE 0x3fcf - EJECT 0x3fe2 - SEEK- 0x3fcd - PLAY 0x3fca - SEEK+ 0x3fcb - RECORD 0x3fd2 - STOP 0x3fc9 - CH- 0x3fde - CH+ 0x3fdf - VOL- 0x3fee - VOL+ 0x3fef - MUTE 0x3ff2 - TV/FM 0x3fe3 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca b/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca deleted file mode 100644 index 6baf5e4..0000000 --- a/abs/core-testing/live-installer/templates/remotes/caraca/lircrc.caraca +++ /dev/null @@ -1,134 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Konrad Riedel -# -begin - prog = irexec - button = tv/fm - config = xawtv -geometry +64+64 & - mode = tv - flags = once -end - -begin tv - begin - prog = xawtv - button = power - config = quit - flags = mode - end - begin - prog = xawtv - button = source - repeat = 1 - config = setinput next - end - begin - prog = xawtv - button = zoom - repeat = 1 - config = fullscreen - end - begin - prog = xawtv - button = ch- - repeat = 1 - config = setstation prev - end - begin - prog = xawtv - button = ch+ - repeat = 1 - config = setstation next - end - begin - prog = xawtv - button = record - repeat = 1 - #config = snap jpeg - config = quit - end - begin - prog = xawtv - button = scan - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = xawtv - button = MUTE - config = volume mute - end -end tv -begin - prog = irexec - button = power - config = xmms& - mode = xmms - flags = once -end - -begin xmms - begin - prog = xmms - button = play - config = PLAY - end - begin - prog = xmms - button = pause - config = PAUSE - end - begin - prog = xmms - button = stop - config = STOP - end - begin - prog = xmms - button = vol- - repeat = 1 - config = VOL_DOWN - end - begin - prog = xmms - button = vol+ - repeat = 1 - config = VOL_UP - end - - begin - prog = xmms - button = power - config = QUIT - flags = mode - end - begin - prog = xmms - button = mute - config = MUTE - end - begin - prog = xmms - button = seek+ - repeat = 1 - config = FWD - end - begin - prog = xmms - button = seek- - repeat = 1 - config = BWD - end - begin - prog = xmms - button = ch+ - config = NEXT - end - begin - prog = xmms - button = ch- - config = PREV - end -end xmms diff --git a/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg b/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/caraca/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos b/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos deleted file mode 100644 index 764506c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/chronos/lircd.conf.chronos +++ /dev/null @@ -1,56 +0,0 @@ - -# -# This config file is for remote that comes with cheap TV Card made by -# Chronos. -# -# contributed by Tõnu Raitviir -# -# brand: Chronos Video Shuttle II -# supported devices: Chronos Video Shuttle II TV Card (BTTV ID 0x23) -# - -begin remote - - name Chronos - bits 5 - eps 30 - aeps 100 - - gap 199766 - toggle_bit 0 - - begin codes - POWER 0x0000000000000000 - MOUSE_MODE 0x0000000000000010 - FULL_SCREEN 0x0000000000000008 - CH+ 0x0000000000000009 - CH- 0x0000000000000019 - 1 0x0000000000000018 - 2 0x0000000000000004 - 3 0x0000000000000014 - 4 0x000000000000001C - 5 0x0000000000000002 - 6 0x0000000000000012 - 7 0x000000000000001A - 8 0x0000000000000006 - 9 0x0000000000000016 - 0 0x000000000000001E - VOL+ 0x0000000000000005 - VOL- 0x000000000000001D - SOURCE 0x0000000000000003 - MUTE 0x000000000000001B - AUDIO 0x0000000000000015 - VIDEO 0x0000000000000011 - CANCEL 0x000000000000001F - ENTER 0x0000000000000001 - ESC 0x000000000000000B - RECALL 0x000000000000000C - AIR_CATV 0x000000000000000E - INC 0x000000000000000A - DEC 0x000000000000000D - BOX 0x0000000000000017 - DOWN_ARROW 0x0000000000000013 - LEFT_ARROW_TERM 0x000000000000000F - RIGHT_ARROW_TERM 0x0000000000000007 - end codes -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x b/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x deleted file mode 100644 index 62f711e..0000000 --- a/abs/core-testing/live-installer/templates/remotes/cph03x/lircd.conf.cph03x +++ /dev/null @@ -1,72 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.0 on Thu Apr 27 12:27:04 2000 -# -# contributed by Claas Langbehn -# Please read the documentation, faq etc. -# before sending me mails. -# -# brand: ASKEY -# model: AS-218 / AS-220 -# supported devices: ASKEY MagicTV -# -# comment: repeated keys are recognized, now. -# - -begin remote - - name AS-218 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9087 4424 - one 629 1617 - zero 629 495 - ptrail 632 - repeat 9088 2182 - pre_data_bits 16 - pre_data 0x61D6 - gap 107905 - repeat_bit 0 - - begin codes - 0 0x00000000000000FF - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - LOOP 0x00000000000050AF -# unused - FINE_UP(PLUS) 0x00000000000030CF - ZOOM 0x000000000000B04F - RECORD 0x000000000000708F - PREVIEW 0x000000000000F00F - - SCAN 0x00000000000008F7 - VIDEO 0x0000000000008877 - POWER 0x00000000000048B7 - MUTE 0x000000000000C837 - COLOR 0x00000000000028D7 -#unused - FREEZE 0x0000000000006897 - 100 0x000000000000E817 - FINE_DOWN(MINUS) 0x00000000000018E7 - PLAY 0x0000000000009867 - CH_UP 0x00000000000058A7 - VOL_UP 0x000000000000D827 - TV 0x00000000000038C7 - STOP 0x000000000000B847 - CH_DOWN 0x0000000000007887 - VOL_DOWN 0x000000000000F807 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb deleted file mode 100644 index e84a68b..0000000 --- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.alsa_usb +++ /dev/null @@ -1,56 +0,0 @@ -# -# contributed by Clemens Ladisch -# -# brand: Creative -# model: RM-1500 -# supported devices: Sound Blaster Extigy, SB Audigy 2 NX -# -# This is for the integrated IR receiver in Creative USB audio devices -# when accessed with LIRC's alsa_usb driver (requires the snd-usb-audio -# driver from ALSA 1.0.9 or later). -# -# This file should work with the exaudio driver, too. -# - -begin remote - - name RM-1500 - bits 8 - - begin codes - power 0x01 - 1 0x02 - 2 0x03 - 3 0x04 - 4 0x05 - 5 0x06 - 6 0x07 - 7 0x08 - 8 0x09 - 9 0x0a - 0 0x0b - cmss 0x0c - mute 0x0d - rec 0x0e - vol- 0x0f - vol+ 0x10 - stop-eject 0x11 - play-pause 0x12 - slow 0x13 - prev 0x14 - next 0x15 - step 0x16 - eax 0x17 - options 0x18 - display 0x19 - return 0x1a - start 0x1b - cancel 0x1c - up 0x1d - left 0x1e - ok 0x1f - right 0x20 - down 0x21 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox deleted file mode 100644 index c5d2d9c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.breakoutbox +++ /dev/null @@ -1,55 +0,0 @@ -# -# contributed by Juergen Jaeschke -# -# brand: Creative -# model: Creative BreakOut-Box Remote Control -# - -begin remote - - name Creative BreakOut-Box IR - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - gap 199984 - toggle_bit 0 - - begin codes - DVD/CD 0x0000000000000001 - DVR/TV 0x0000000000000000 - MENU 0x0000000000000003 - LANG 0x0000000000000005 - PLAYLIST 0x0000000000000011 - BACKWARD 0x000000000000000A - PLAY 0x0000000000000008 - FORWARD 0x000000000000000F - LAST 0x0000000000000002 - STOP 0x0000000000000007 - NEXT 0x0000000000000006 - MUTE 0x0000000000000014 - STEP 0x0000000000000009 - UP 0x000000000000000C - LEFT 0x000000000000000B - RIGHT 0x000000000000000D - DOWN 0x000000000000000E - VOL+ 0x0000000000000012 - VOL- 0x0000000000000015 - OK 0x0000000000000011 - ANGLE+ 0x0000000000000010 - ANGLE- 0x0000000000000013 - REC 0x0000000000000004 - 1 0x0000000000000016 - 2 0x0000000000000017 - 3 0x0000000000000018 - 4 0x0000000000000019 - 5 0x000000000000001A - 6 0x000000000000001B - 7 0x000000000000001C - 8 0x000000000000001D - 9 0x000000000000001E - 0 0x000000000000001F - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative deleted file mode 100644 index 69f3d27..0000000 --- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.creative +++ /dev/null @@ -1,59 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Sat Jan 6 11:38:33 2001 -# -# contributed by Stephen White -# -# brand: Creative -# model: PC-DVD Remote -# supported devices: Creative-Infra-Receiver -# - -begin remote - - name CREATIVE_INFRA_DVD - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9293 4302 - one 771 1494 - zero 771 358 - ptrail 756 - pre_data_bits 16 - pre_data 0x8435 - gap 108646 - toggle_bit 0 - - begin codes - play 0x00000000000005FA - stop 0x00000000000016E9 - pause 0x00000000000000FF - eject 0x00000000000002FD - last 0x00000000000017E8 - rrev 0x00000000000004FB - ffwd 0x00000000000006F9 - next 0x00000000000001FE - 1 0x00000000000008F7 - 2 0x00000000000009F6 - 3 0x0000000000000AF5 - shift 0x00000000000014EB - 4 0x0000000000000CF3 - 5 0x0000000000000DF2 - 6 0x0000000000000EF1 - mouse 0x00000000000007F8 - 7 0x00000000000010EF - 8 0x00000000000011EE - 9 0x00000000000012ED - vol+ 0x0000000000000FF0 - start 0x00000000000003FC - 0 0x00000000000015EA - mute 0x0000000000000BF4 - vol- 0x00000000000013EC - end codes - -end remote - - - diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd deleted file mode 100644 index cdaaad9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.infracd +++ /dev/null @@ -1,61 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3(animax) on Fri Apr 6 18:23:12 2001 -# -# contributed by -# -# brand: Creative -# model: CD-Rom Creditcard-sized IR-Controller -# supported devices: CD-Rom -# - -begin remote - - name CREATIVE_INFRA - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9051 4625 - one 534 1707 - zero 534 588 - ptrail 490 - repeat 9039 2363 - pre_data_bits 16 - pre_data 0x8435 - gap 108434 - min_repeat 1 - toggle_bit 0 - - - begin codes - PAUSE 0x00000000000001FE - PLAY 0x00000000000002FD - STOP 0x00000000000003FC - REW 0x00000000000005FA - PREV 0x00000000000006F9 - FF 0x00000000000007F8 - MENU 0x00000000000004FB - MOUSE 0x00000000000008F7 - 1 0x00000000000009F6 - 2 0x0000000000000AF5 - 3 0x0000000000000BF4 - 4 0x0000000000000DF2 - 5 0x0000000000000EF1 - 6 0x0000000000000FF0 - 7 0x00000000000011EE - 8 0x00000000000012ED - 9 0x00000000000013EC - 0 0x00000000000016E9 - MUTE 0x0000000000000CF3 - VOL_UP 0x00000000000010EF - VOL_DOWN 0x00000000000014EB - SHIFT 0x00000000000015EA - ENTER 0x00000000000017E8 - ZOOM 0x00000000000018E7 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive b/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive deleted file mode 100644 index b68e5c4..0000000 --- a/abs/core-testing/live-installer/templates/remotes/creative/lircd.conf.livedrive +++ /dev/null @@ -1,115 +0,0 @@ -# -# contributed by Andrew de Quincey -# -# brand: rm1000w -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - - name rm1000w - flags SPACE_ENC|CONST_LENGTH - bits 16 - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - pre_data_bits 16 - pre_data 0x8322 - gap 108000 - toggle_bit 0 - - repeat 9000 2250 - - frequency 38000 - duty_cycle 33 - - - begin codes - 1 0x0000000000008B74 - 2 0x0000000000008F70 - 3 0x000000000000906F - 4 0x0000000000008A75 - 5 0x000000000000847B - 6 0x0000000000007887 - 7 0x0000000000008976 - 8 0x000000000000837C - 9 0x0000000000007788 - 0 0x000000000000807F - stop 0x000000000000857A - play 0x0000000000007986 - pause 0x0000000000007986 - slow 0x0000000000007D82 - step 0x0000000000007E81 - prev 0x0000000000007F80 - next 0x0000000000007A85 - mute 0x0000000000006E91 - vol- 0x000000000000639C - vol+ 0x000000000000629D - eax 0x0000000000008C73 - options 0x000000000000827D - display 0x0000000000007689 - return 0x0000000000008E71 - start 0x0000000000008877 - close 0x0000000000007C83 - up 0x0000000000007B84 - down 0x0000000000008D72 - left 0x0000000000008778 - right 0x000000000000758A - ok 0x000000000000817E - power 0x000000000000619e - cmss 0x000000000000718e - record 0x000000000000738c - - end codes - -end remote - -# -# contributed by Stefan Brüns -# -# brand: Creative Audigy 2 ZS Platinum LiveDrive -# model no. of remote control: -# devices being controlled by this remote: -# - - -begin remote - - - name LiveDrive - flags SPACE_ENC|CONST_LENGTH - bits 16 - eps 30 - aeps 100 - - - header 9000 4500 - one 563 1687 - zero 563 562 - pre_data_bits 16 - pre_data 0x8000 - gap 108000 - toggle_bit 0 - - - repeat 9000 2250 - - - frequency 38000 - duty_cycle 33 - - - - - begin codes - mute 0x0000000000000040 - vol+ 0x0000000000008080 - vol- 0x0000000000008082 - cmss 0x0000000000000080 - end codes -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV b/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV deleted file mode 100644 index fbc91a8..0000000 --- a/abs/core-testing/live-installer/templates/remotes/dvico/lircd.conf.fusionHDTV +++ /dev/null @@ -1,221 +0,0 @@ -# -# contributed by Chris Pascoe -# -# brand: DVICO -# model no. of remote control: DVB-T -# devices being controlled by this remote: -# - -begin remote - - name DVICO - bits 32 - eps 0 - aeps 0 - - one 0 0 - zero 0 0 - pre_data_bits 32 - pre_data 0x10046 - gap 195755 - post_data_bits 0 - toggle_bit 0 - - begin codes - 1 0x00000000000011F9 - 2 0x00000000000012F9 - 3 0x00000000000013F9 - 4 0x00000000000014F9 - 5 0x00000000000015F9 - 6 0x00000000000016F9 - 7 0x00000000000017F9 - 8 0x00000000000018F9 - 9 0x00000000000019F9 - 0 0x00000000000010F9 - power 0x0000000000000AF9 - pcoff 0x0000000000000CF9 - camera 0x0000000000001AF9 - record 0x0000000000001BF9 - chup 0x00000000000000F9 - chdown 0x00000000000001F9 - volup 0x00000000000002F9 - voldown 0x00000000000003F9 - playpause 0x0000000000001FF9 - rew 0x0000000000001CF9 - stop 0x0000000000001EF9 - ff 0x0000000000001DF9 - folder 0x00000000000040F9 - atvdtv 0x00000000000006F9 - dvhs 0x00000000000041F9 - menu 0x00000000000008F9 - aspect 0x00000000000007F9 - zoom 0x00000000000004F9 - epg 0x0000000000000BF9 - mute 0x0000000000000DF9 - back 0x0000000000000EF9 - hd 0x0000000000000FF9 - red 0x00000000000005F9 - green 0x00000000000009F9 - yellow 0x00000000000042F9 - blue 0x00000000000043F9 - end codes - -end remote - -# -# this config file was automatically generated -# using lirc-0.7.0(dvico) on Sat Jun 18 00:56:01 2005 -# -# contributed by anonymous -# -# brand: DVICO -# model no. of remote control: MCE Remote -# - -begin remote - - name DVICO_MCE - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x0 - post_data_bits 8 - post_data 0x0 - gap 195956 - toggle_bit 0 - - - begin codes - ok 0x0000000000FE5E00 - dtv 0x0000000000FE0200 - mp3 0x0000000000FE0E00 - dvd 0x0000000000FE1A00 - cpf 0x0000000000FE1E00 - setup 0x0000000000FE1600 - tv_onoff 0x0000000000FE4600 - guide 0x0000000000FE0A00 - back 0x0000000000FE4900 - more 0x0000000000FE5900 - dvd_menu 0x0000000000FE4D00 - alt_tab 0x0000000000FE5500 - replay 0x0000000000FE0F00 - skip 0x0000000000FE1200 - up 0x0000000000FE5100 - down 0x0000000000FE5300 - left 0x0000000000FE5B00 - right 0x0000000000FE5F00 - start 0x0000000000FE4200 - vol_up 0x0000000000FE1500 - vol_down 0x0000000000FE0500 - ch_up 0x0000000000FE1100 - ch_down 0x0000000000FE0900 - snapshot 0x0000000000FE5200 - live 0x0000000000FE5A00 - folder_open 0x0000000000FE1900 - 1 0x0000000000FE0B00 - 2 0x0000000000FE1700 - 3 0x0000000000FE1B00 - 4 0x0000000000FE0700 - 5 0x0000000000FE5000 - 6 0x0000000000FE5400 - 7 0x0000000000FE4800 - 8 0x0000000000FE4C00 - 9 0x0000000000FE5800 - 0 0x0000000000FE0300 - aspect 0x0000000000FE1300 - fullscreen 0x0000000000FE1F00 - rewind 0x0000000000FE4300 - playpause 0x0000000000FE4700 - fastforward 0x0000000000FE4F00 - stop 0x0000000000FE0D00 - mute 0x0000000000FE5700 - record 0x0000000000FE0100 - white_onoff 0x0000000000FE4E00 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.3-CVS(dvico) on Thu Sep 1 21:36:06 2005 -# -# contributed by: David Bussenschutt -# -# brand: "DViCO" -# model no. of remote control: "Fusion Remote MCE" -# devices being controlled by this remote: My MythTV install -# - -begin remote - - name DVICO_MCE - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 48 - pre_data 0x100460000 - post_data_bits 8 - post_data 0xFE - gap 195843 - toggle_bit 0 - - - begin codes - ok 0x5e - up 0x51 - down 0x53 - left 0x5B - right 0x5F - setup 0x16 - tv_onoff 0x46 - guide 0x0A - dtv 0x02 - mp3 0x0E - dvd 0x1A - cpf 0x1E - back 0x49 - more 0x59 - dvd_menu 0x4D - alt_tab 0x55 - replay 0x0F - skip 0x12 - start 0x42 - vol_up 0x15 - vol_down 0x05 - ch_up 0x11 - ch_down 0x09 - photo 0x52 - live 0x5A - folder 0x19 - 1 0x0B - 2 0x17 - 3 0x1B - 4 0x07 - 5 0x50 - 6 0x54 - 7 0x48 - 8 0x4C - 9 0x58 - 0 0x03 - ratio 0x13 - zoom 0x1F - rew 0x43 - playpause 0x47 - ff 0x4F - mute 0x57 - stop 0x0D - rec 0x01 - power_onoff 0x4e - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65 b/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65 deleted file mode 100644 index a10181d..0000000 --- a/abs/core-testing/live-installer/templates/remotes/ea65/lircd.conf.ea65 +++ /dev/null @@ -1,73 +0,0 @@ -# -# Config file for AOpen XC Cube EA65, EA65-II -# Max Krasnyanskiy -# - -begin remote - name EA65 - bits 24 - eps 10 - aeps 100 - - gap 960000 - toggle_bit 0 - - begin codes - tv/pvr 0x0014814c - photo 0x0017810e - htpc 0x0011811b - dvd/vcd 0x00128100 - cd/mp3 0x00138152 - fm 0x00158111 - video 0x0016810f - - 1 0x0041810b - 2 0x00428115 - 3 0x00438112 - 4 0x00448141 - 5 0x00458119 - 6 0x00468116 - 7 0x00478150 - 8 0x0048811a - 9 0x00498155 - * 0x00328156 - 0 0x00408158 - # 0x0030814d - - menu 0x00188104 - exit 0x001d8154 - enter 0x001e8101 - up 0x00198159 - down 0x001a811c - left 0x001c8102 - right 0x001b815d - - vol+ 0x00298103 - vol- 0x002a814e - ch+ 0x002c8113 - ch- 0x002d8117 - mute 0x00288105 - tune+ 0x002e8144 - tune- 0x002f8148 - mem 0x00318145 - scan 0x00278151 - - display 0x0034811f - eject 0x0035815c - rwnd 0x00228118 - ffwd 0x00218110 - rec 0x002b810a - repeate 0x0038815a - prev 0x00238107 - next 0x00248114 - time/shift 0x00338108 - stop 0x0020811d - play/pause 0x001f8109 - - play-pause 0x0080811d - stop-eject 0x00238107 - mode- 0x00ff1080 - mode+ 0x00ff1180 - end codes -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65 b/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65 deleted file mode 100644 index fd96d42..0000000 --- a/abs/core-testing/live-installer/templates/remotes/ea65/lircrc.ea65 +++ /dev/null @@ -1,381 +0,0 @@ -# -# Max Krasnyanskiy -# - -# -# Xine key bindings. -# - -# start playback -begin - button = dvd/vcd - prog = xine - repeat = 1 - config = Play -end - -# playback pause toggle -begin - button = play/pause - prog = xine - repeat = 1 - config = Pause -end - -# stop playback -begin - button = stop - prog = xine - repeat = 1 - config = Stop -end - -# eject the current medium -begin - button = eject - prog = xine - repeat = 1 - config = Eject -end - -# scan playlist to grab stream infos -begin - button = mem - prog = xine - repeat = 1 - config = ScanPlaylistInfo -end - -# set position to -60 seconds in current stream -begin - button = rwnd - prog = xine - repeat = 1 - config = SeekRelative-60 -end - -# set position to +60 seconds in current stream -begin - button = ffwd - prog = xine - repeat = 1 - config = SeekRelative+60 -end - -# increment playback speed -begin - button = tune+ - prog = xine - repeat = 1 - config = SpeedFaster -end - -# decrement playback speed -begin - button = tune- - prog = xine - repeat = 1 - config = SpeedSlower -end - -# increment audio volume -begin - button = vol+ - prog = xine - repeat = 1 - config = Volume+ -end - -# decrement audio volume -begin - button = vol- - prog = xine - repeat = 1 - config = Volume- -end - -# audio muting toggle -begin - button = mute - prog = xine - repeat = 1 - config = Mute -end - -# select next audio channel -begin - button = ch+ - prog = xine - repeat = 1 - config = AudioChannelNext -end - -# select previous audio channel -begin - button = ch- - prog = xine - repeat = 1 - config = AudioChannelPrior -end - -# interlaced mode toggle -begin - button = scan - prog = xine - repeat = 1 - config = ToggleInterleave -end - -# cycle aspect ratio values -begin - button = display - prog = xine - repeat = 1 - config = ToggleAspectRatio -end - -# jump to Title Menu -begin - button = menu - prog = xine - repeat = 1 - config = TitleMenu -end - -# menu navigate up -begin - button = up - prog = xine - repeat = 1 - config = EventUp -end - -# menu navigate down -begin - button = down - prog = xine - repeat = 1 - config = EventDown -end - -# menu navigate left -begin - button = left - prog = xine - repeat = 1 - config = EventLeft -end - -# menu navigate right -begin - button = right - prog = xine - repeat = 1 - config = EventRight -end - -# menu select -begin - button = enter - prog = xine - repeat = 1 - config = EventSelect -end - -# jump to next chapter -begin - button = next - prog = xine - repeat = 1 - config = EventNext -end - -# jump to previous chapter -begin - button = prev - prog = xine - repeat = 1 - config = EventPrior -end - -# select a subtitle file -begin - button = repeat - prog = xine - repeat = 1 - config = SubSelector -end - -# enter the number 0 -begin - button = 0 - prog = xine - repeat = 1 - config = Number0 -end - -# enter the number 1 -begin - button = 1 - prog = xine - repeat = 1 - config = Number1 -end - -# enter the number 2 -begin - button = 2 - prog = xine - repeat = 1 - config = Number2 -end - -# enter the number 3 -begin - button = 3 - prog = xine - repeat = 1 - config = Number3 -end - -# enter the number 4 -begin - button = 4 - prog = xine - repeat = 1 - config = Number4 -end - -# enter the number 5 -begin - button = 5 - prog = xine - repeat = 1 - config = Number5 -end - -# enter the number 6 -begin - button = 6 - prog = xine - repeat = 1 - config = Number6 -end - -# enter the number 7 -begin - button = 7 - prog = xine - repeat = 1 - config = Number7 -end - -# enter the number 8 -begin - button = 8 - prog = xine - repeat = 1 - config = Number8 -end - -# enter the number 9 -begin - button = 9 - prog = xine - repeat = 1 - config = Number9 -end - -# quit the program -begin - button = exit - prog = xine - repeat = 1 - config = Quit -end - -## -# End of xine key bindings. -## - -## MPlayer lirc setup - -# Show OSD -begin - prog = mplayer - button = menu - repeat = 1 - config = osd -end - -# Pause playback -begin - prog = mplayer - button = play/pause - repeat = 1 - config = pause -end - -# Stop playback and exit -begin - prog = mplayer - button = stop - repeat = 1 - config = stop #quit -end - -# Mute -begin - prog = mplayer - button = mute - repeat = 1 - config = mute -end - -# Seek back 10 seconds -begin - prog = mplayer - button = rwnd - repeat = 1 - config = seek -10 -end - -# Seek forward 30 seconds -begin - prog = mplayer - button = ffwd - repeat = 1 - config = seek +10 -end - -# Quit -begin - prog = mplayer - button = exit - repeat = 1 - config = quit -end - -# Seek forward 10 minutes -begin - prog = mplayer - button = next - repeat = 1 - config = seek +600 -end - -# Seek backward 10 minutes -begin - prog = mplayer - button = prev - repeat = 1 - config = seek -600 -end - -# Toggle full-screen -begin - prog = mplayer - button = display - repeat = 1 - config = vo_fullscreen -end diff --git a/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg b/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/ea65/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte b/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte deleted file mode 100644 index d2330a3..0000000 --- a/abs/core-testing/live-installer/templates/remotes/ericsson/lircd.conf.bte +++ /dev/null @@ -1,53 +0,0 @@ -# -# -# contributed by Vadim Shliakhov -# -# brand: Ericsson -# model: Mobile Phone over Bluetooth (BTE) -# -# supported devices: -# Ericsson t520m, t630 -# - -begin remote - - name bte - bits 16 - - begin codes - 0 0x0030 - 1 0x0031 - 2 0x0032 - 3 0x0033 - 4 0x0034 - 5 0x0035 - 6 0x0036 - 7 0x0037 - 8 0x0038 - 9 0x0039 - STAR 0x002a # '*' - HASH 0x0023 # '#' - UP 0x005e # '^' - DOWN 0x0076 # 'v' - LEFT 0x003c # '<' - RIGHT 0x003e # '>' - CANCEL 0x0063 # 'c' - VOL_UP 0x0075 # 'u' - VOL_DOWN 0x0064 # 'd' - -# t520m - NO 0x0065 # 'e' - YES 0x0073 # 's' - OPTION 0x004c # 'L' - MEMO 0x0047 # 'G' - hides dialog widget! - -# t630 - F_LEFT 0x005b # '[' - F_RIGHT 0x005d # ']' - triggers 'e' - J_CLICK 0x3a4a # ':J' - triggers 'e' - RETURN 0x3a52 # ':R' - triggers 'e' - CAMERA 0x3a43 # ':C' - WAP 0x3a4f # ':O' - - end codes -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf b/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf deleted file mode 100644 index e645cba..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/DENON.conf +++ /dev/null @@ -1,31 +0,0 @@ -# -# generic Denon config file -# -# source: various -# -# used by: Denon, Sharp - -begin remote - - name DENON - bits 15 - flags SPACE_ENC - eps 30 - aeps 100 - - one 275 1900 - zero 275 775 - ptrail 275 - gap 43000 - repeat_bit 0 - -# frequency 32000 -# frequency is 455/12 according to stewart@neuron.com -# remote is based on Sharp lc3715 IC - frequency 38000 -# duty_cycle unknown - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf b/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf deleted file mode 100644 index e786f2b..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/MOTOROLA.conf +++ /dev/null @@ -1,53 +0,0 @@ -# -# generic Motorola config file -# -# source: Motorola Application Note AN463 -# ICs 68HC05K0/MC144105/MC144107 -# -# used by Grundig -# -# currently you have to create config files for such remotes manually -# as irrecord always will record the start code - -begin remote - - name MOTOROLA_START/STOP - flags SHIFT_ENC|CONST_LENGTH - bits 10 - eps 10 - aeps 250 - - header 512 2560 - one 512 512 - zero 512 512 - gap 32800 - repeat_bit 0 - frequency 32000 - duty_cycle 25 - - begin codes - START/STOP 0x0000000000000000 - end codes - -end remote - -begin remote - - name MOTOROLA - flags SHIFT_ENC|CONST_LENGTH - bits 10 - eps 10 - aeps 250 - - header 512 2560 - one 512 512 - zero 512 512 - gap 131000 - repeat_bit 0 - frequency 32000 - duty_cycle 25 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf deleted file mode 100644 index 51c31d9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/NEC-pulse.conf +++ /dev/null @@ -1,32 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Toshiba - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - repeat 9000 4500 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf deleted file mode 100644 index 068c253..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/NEC-short-pulse.conf +++ /dev/null @@ -1,34 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Akai, Amstrad, Eltasat, Hitachi, ITT, Kenwood, Onkyo, -# Sanyo, Schneider, SEG, Yamaha - - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - repeat 9000 2250 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf b/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf deleted file mode 100644 index 18ee327..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/NEC.conf +++ /dev/null @@ -1,30 +0,0 @@ -# -# generic NEC config file -# -# source: CIrCC datasheet, exiting config files -# -# used by: Canon, Creative, Domland, Orion - -begin remote - - name NEC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 16 -# just a guess - gap 108000 - - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf b/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf deleted file mode 100644 index f62e3f9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/RC-5.conf +++ /dev/null @@ -1,30 +0,0 @@ -# -# generic RC-5 config file -# -# source: SAA3010 datasheet -# -# used by: Philips, Marantz, Anitech, Elitron, Grundig, Schneider - -begin remote - - name RC-5 - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 7 - gap 113792 - toggle_bit 2 - -# frequency 35750 - frequency 36000 - duty_cycle 50 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf b/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf deleted file mode 100644 index 9565707..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/RC-6.conf +++ /dev/null @@ -1,28 +0,0 @@ -# -# generic RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips - -begin remote - - name RC-6 - bits 8 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 13 - pre_data 0xEFB - gap 108000 - toggle_bit 5 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf b/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf deleted file mode 100644 index 89f847a..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/RCMM-32.conf +++ /dev/null @@ -1,23 +0,0 @@ -begin remote - - name RCMM-32 - bits 32 - flags RCMM|CONST_LENGTH - eps 2 - aeps 100 - - header 417 278 - three 167 778 - two 167 611 - one 167 444 - zero 167 278 - ptrail 167 - pre_data_bits 0 - gap 99817 - repeat_bit 0 - - begin codes - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf b/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf deleted file mode 100644 index b9702ea..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/RECS80.conf +++ /dev/null @@ -1,31 +0,0 @@ -# -# generic RECS 80 config file -# -# source: SAA3008 datasheet -# -# used by: Saba, Technisat - -begin remote - - name RECS80 - bits 5 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 150 - - one 141 7590 - zero 141 5090 - ptrail 141 - pre_data_bits 6 - pre_data 0x22 - gap 121440 - toggle_bit 2 - -# frequency 37916 - frequency 38000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf b/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf deleted file mode 100644 index fbcf8dc..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/SANYO.conf +++ /dev/null @@ -1,34 +0,0 @@ -# -# generic Sanyo config file -# -# source: CIrCC datasheet, exiting config files -# Sanyo LC7461M datasheet -# -# used by: Aiwa, Chinon, Sanyo - -begin remote - - name Sanyo - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - pre_data_bits 26 -# just a guess - gap 108000 - - repeat 9000 4500 - -# 455kHz/12 - frequency 37916 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf b/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf deleted file mode 100644 index d62d12c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/SONY12.conf +++ /dev/null @@ -1,28 +0,0 @@ -# -# generic Sony 12-bit config file -# -# source: various -# - -begin remote - - name SONY - bits 7 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 2400 600 - one 1200 600 - zero 600 600 - post_data_bits 5 - gap 45000 - min_repeat 2 - - frequency 40000 - duty_cycle 33 - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf b/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf deleted file mode 100644 index 4a64ca7..0000000 --- a/abs/core-testing/live-installer/templates/remotes/generic/SONY20.conf +++ /dev/null @@ -1,29 +0,0 @@ -# -# generic Sony 20-bit config file -# -# source: various -# - -begin remote - - name SONY - bits 7 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 2400 600 - one 1200 600 - zero 600 600 - post_data_bits 13 -# gap is just a guess - gap 45000 - min_repeat 2 - - frequency 40000 -# duty_cycle unknown - - begin codes - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc b/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc deleted file mode 100644 index 6f86bfe..0000000 --- a/abs/core-testing/live-installer/templates/remotes/gr8zap/lircrc +++ /dev/null @@ -1,472 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY' -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end - -begin - prog = mythtv - button = POWER - config = Esc -end - -# ??? -begin - prog = mythtv - button = MUTE - config = F9 -end - -begin - prog = mythtv - button = CH_UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = VOL_UP - repeat = 3 - config = ] -end - -begin - prog = mythtv - button = CH_DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = VOL_DOWN - repeat = 3 - config = [ -end - -begin - prog = mythtv - button = UP - repeat = 3 - config = Up -end - -begin - prog = mythtv - button = LEFT -# navigates, or skips back during playback or live tv. - config = Left -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = Right -end - -begin - prog = mythtv - button = DOWN - repeat = 3 - config = Down -end - -begin - prog = mythtv - button = MENU - config = m -end - -begin - prog = mythtv - button = EXIT - config = Esc -end - -begin - prog = mythtv - button = PLAY - config = l -end - -begin - prog = mythtv - button = PAUSE - config = p -end - -begin - prog = mythtv - button = STOP - config = Esc -end - -begin - prog = mythtv - # skip backward - button = |<< - config = PgUp -end - -begin - prog = mythtv - # skip forward - button = >>| - config = PgDown -end - -begin - prog = mythtv - button = RECORD - config = r -end - -begin - prog = mythtv - # rewind - button = << - config = < -end - -begin - prog = mythtv - # fast forward - button = >> - config = > -end - -begin - prog = mythtv - button = RED - # Delete - config = z -end - -begin - prog = mythtv - button = GREEN - # Info - config = i -end - -begin - prog = mythtv - button = YELLOW - # change aspect ratio - config = w -end - -begin - prog = mythtv - button = BLUE - config = Tab -end - -# MPLAYER -begin - prog = mplayer - button = POWER - config = quit -end - -begin - prog = mplayer - button = MUTE - config = mute -end - -begin - prog = mplayer - button = VOL_UP - repeat = 3 - config = volume +1 -end - -begin - prog = mplayer - button = VOL_DOWN - repeat = 3 - config = volume -1 -end - -begin - prog = mplayer - button = UP - repeat = 3 - config = seek +10 -end - -begin - prog = mplayer - button = LEFT -# navigates, or skips back during playback or live tv. - config = seek -30 -end - -begin - prog = mplayer - button = RIGHT -# navigates, or skips forwards during playback or live tv. - config = seek +60 -end - -begin - prog = mplayer - button = DOWN - repeat = 3 - config = seek -10 -end - -begin - prog = mplayer - button = EXIT - config = quit -end - -begin - prog = mplayer - button = play - config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin - prog = mplayer - button = STOP - config = quit -end - -begin - prog = mplayer - # skip backward - button = |<< - config = seek -600 -end - -begin - prog = mplayer - # skip forward - button = >>| - config = seek +600 -end - -begin - prog = mplayer - # slow forward - button = << - config = speed_mult 0.5 -end - -begin - prog = mplayer - # fast forward - button = >> - config = speed_mult 2.0 -end - -### Xine lirc setup By AnDy! - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = UP -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = DOWN -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = LEFT -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = RIGHT -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = EXIT -repeat = 3 -config = Menu -end - -begin -prog = xine -button = >> -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = << -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = VOL_UP -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VOL_DOWN -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = >>| -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = |<< -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GREEN -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = POWER -repeat = 3 -config = Quit -end diff --git a/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg deleted file mode 100644 index 4d1a5fe..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/gr8zap/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge deleted file mode 100644 index 4987807..0000000 --- a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircd.conf.hauppauge +++ /dev/null @@ -1,274 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999 -# -# contributed by Jens Leuschner -# -# brand: Hauppauge -# model: -# supported devices: WinTV primo; WinTV pci; WinTV radio -# -# This config file will work with both homebrew receivers and -# original Hauppauge TV cards !!! -# - -begin remote - - name Hauppauge - bits 13 - flags SHIFT_ENC - eps 30 - aeps 100 - - one 950 830 - zero 950 830 - plead 960 - gap 89584 - repeat_bit 2 - - begin codes - TV 0x000000000000100F - RADIO 0x000000000000100C - FULL_SCREEN 0x000000000000102E - CH+ 0x0000000000001020 - CH- 0x0000000000001021 - VOL- 0x0000000000001011 - VOL+ 0x0000000000001010 - MUTE 0x000000000000100D - SOURCE 0x0000000000001022 - 1 0x0000000000001001 - 2 0x0000000000001002 - 3 0x0000000000001003 - 4 0x0000000000001004 - 5 0x0000000000001005 - 6 0x0000000000001006 - 7 0x0000000000001007 - 8 0x0000000000001008 - 9 0x0000000000001009 - 0 0x0000000000001000 - RESERVED 0x000000000000101E - MINIMIZE 0x0000000000001026 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(animax) on Tue Apr 15 19:50:27 2003 -# -# contributed by -# -# brand: Hauppauge -# model no. of remote control: -# devices being controlled by this remote: PVR 2/350 -# - -begin remote - - name hauppauge_pvr - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Power 0x00000000000017FD - Go 0x00000000000017FB - 1 0x00000000000017C1 - 2 0x00000000000017C2 - 3 0x00000000000017C3 - 4 0x00000000000017C4 - 5 0x00000000000017C5 - 6 0x00000000000017C6 - 7 0x00000000000017C7 - 8 0x00000000000017C8 - 9 0x00000000000017C9 - Back/Exit 0x00000000000017DF - 0 0x00000000000017C0 - Menu 0x00000000000017CD - Red 0x00000000000017CB - Green 0x00000000000017EE - Yellow 0x00000000000017F8 - Blue 0x00000000000017E9 - Ch+ 0x00000000000017E0 - Ch- 0x00000000000017E1 - Vol- 0x00000000000017D1 - Vol+ 0x00000000000017D0 - Ok 0x00000000000017E5 - Mute 0x00000000000017CF - Blank 0x00000000000017CC - Full 0x00000000000017FC - Rewind 0x00000000000017F2 - Play 0x00000000000017F5 - Forward 0x00000000000017F4 - Record 0x00000000000017F7 - Stop 0x00000000000017F6 - Pause 0x00000000000017F0 - Replay 0x00000000000017E4 - Skip 0x00000000000017DE - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004 -# -# contributed by -# -# brand: Hauppauge 350 -# Created: G.J. Werler (The Netherlands) -# Project: Mythtv Fedora Pundit-R www.mythtvportal.com -# Date: 2004/11/28 -# model no. of remote control: Hauppauge A415-HPG -# devices being controlled by this remote: PVR-350 -# - -begin remote - - name Hauppauge_350 - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 969 811 - zero 969 811 - plead 1097 - gap 114605 - toggle_bit 2 - - - begin codes - Go 0x00000000000017BB - Power 0x00000000000017BD - TV 0x000000000000179C - Videos 0x0000000000001798 - Music 0x0000000000001799 - Pictures 0x000000000000179A - Guide 0x000000000000179B - Radio 0x000000000000178C - Up 0x0000000000001794 - Left 0x0000000000001796 - Right 0x0000000000001797 - Down 0x0000000000001795 - OK 0x00000000000017A5 - Back/Exit 0x000000000000179F - Menu/i 0x000000000000178D - Vol+ 0x0000000000001790 - Vol- 0x0000000000001791 - Prev.Ch 0x0000000000001792 - Mute 0x000000000000178F - Ch+ 0x00000000000017A0 - Ch- 0x00000000000017A1 - Record 0x00000000000017B7 - Stop 0x00000000000017B6 - Rewind 0x00000000000017B2 - Play 0x00000000000017B5 - Forward 0x00000000000017B4 - Replay/SkipBackward 0x00000000000017A4 - Pause 0x00000000000017B0 - SkipForward 0x000000000000179E - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Asterix 0x000000000000178A - 0 0x0000000000001780 - # 0x000000000000178E - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - end codes - -end remote -# -# this config file was automatically generated -# using lirc-0.7.0pre4(serial) on Sun Oct 2 00:24:32 2005 -# -# contributed by anton|ganthaler.at and juergen.wilhelm|aon.at -# members of linux user group Vorarlberg www.lugv.at -# -# for ir remote controler from Hauppauge WinTV Nexus-S -# most of the keys are supported -# -# brand: Hauppauge -# model no. of remote control: WinTV Nexus-S -# devices being controlled by this remote: -# - -begin remote - - name Hauppauge_WinTV_Nexus-S - bits 13 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 944 828 - zero 944 828 - plead 980 - gap 113932 - min_repeat 1 - toggle_bit 2 - - - begin codes - Up 0x0000000000001794 - Down 0x0000000000001795 - Left 0x0000000000001796 - Right 0x0000000000001797 - Power 0x00000000000017BD - Ok 0x00000000000017A5 - Menu 0x000000000000178D - Back 0x000000000000179F - Red 0x000000000000178B - Green 0x00000000000017AE - Yellow 0x00000000000017B8 - Blue 0x00000000000017A9 - 0 0x0000000000001780 - 1 0x0000000000001781 - 2 0x0000000000001782 - 3 0x0000000000001783 - 4 0x0000000000001784 - 5 0x0000000000001785 - 6 0x0000000000001786 - 7 0x0000000000001787 - 8 0x0000000000001788 - 9 0x0000000000001789 - Play 0x00000000000017B5 - Pause 0x00000000000017B0 - Stop 0x00000000000017B6 - Record 0x00000000000017B7 - FastFwd 0x00000000000017B4 - FastRwd 0x00000000000017B2 - Channel+ 0x00000000000017A0 - Channel- 0x00000000000017A1 - Volume+ 0x0000000000001790 - Volume- 0x0000000000001791 - Mute 0x000000000000178F - Timers 0x000000000000178A - Recordings 0x000000000000178E - Back 0x000000000000179F - Record 0x00000000000017B7 - Pause 0x00000000000017B0 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge b/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge deleted file mode 100644 index d0f36e8..0000000 --- a/abs/core-testing/live-installer/templates/remotes/hauppauge/lircmd.conf.hauppauge +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * RESERVED - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH+ -MOVE_OUT * CH- - -BUTTON1_TOGGLE * 5 -BUTTON1_TOGGLE * RADIO -BUTTON2_TOGGLE * VOL+ -BUTTON3_TOGGLE * SOURCE - -BUTTON1_CLICK * TV -BUTTON1_CLICK * VOL- -BUTTON3_CLICK * MUTE - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg b/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg deleted file mode 100644 index a40a1e8..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/hauppauge/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo b/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo deleted file mode 100644 index 4b3d95a..0000000 --- a/abs/core-testing/live-installer/templates/remotes/hercules/lircd.conf.smarttv_stereo +++ /dev/null @@ -1,63 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(any) on Mon Oct 6 01:10:14 2003 -# -# contributed by Dimitris Michail -# -# brand: Hercules -# model no. of remote control: unknown -# devices being controlled by this remote: Hercules SmartTV Stereo -# -# Works with module lirc_i2c, reports PV951 IR - -begin remote - - name HERCULES_SMARTTV_STEREO - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 16 - pre_data 0x61D6 - gap 199964 - toggle_bit 0 - - - begin codes - POWER 0x00000000000048B7 - MUTE 0x000000000000C837 - PREVIEW 0x000000000000F00F - FULLSCREEN 0x00000000000038C7 - AV/TV 0x0000000000008877 - TELETEXT 0x00000000000008F7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - 0 0x00000000000000FF - SNAPSHOT 0x00000000000050AF - 100+ 0x000000000000E817 - CH+ 0x00000000000058A7 - CH- 0x0000000000007887 - VOL+ 0x000000000000D827 - VOL- 0x000000000000F807 - PAUSE 0x000000000000B04F - RECORD 0x000000000000708F - STOP 0x000000000000B847 - PLAY 0x0000000000009867 - TV_REPLAY 0x0000000000006897 - TIME_SHIFT 0x00000000000028D7 - SEEK_BACK 0x00000000000018E7 - SEEK_FWD 0x00000000000030CF - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf deleted file mode 100644 index 97bbf4c..0000000 --- a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircd.conf +++ /dev/null @@ -1,88 +0,0 @@ -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.8.0(imon_pad) on Mon Jan 23 20:22:11 2006 -# -# contributed by M.Brakemeier -# -# brand: SoundGraph -# model no. of remote control: iMON-PAD -# devices being controlled by this remote: -# - -begin remote - - name iMON-PAD - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 235965 - min_repeat 1 - toggle_bit 0 - - begin codes - AppExit 0x288195B7 - Power 0x289115B7 - Record 0x298115B7 - Play 0x2A8115B7 - Open 0x29B1d5B7 - Rewind 0x2A8195B7 - Pause 0x2A9115B7 - FastForward 0x2B8115B7 - PrevChapter 0x2B9115B7 - Stop 0x2B9715B7 - NextChapter 0x298195B7 - Esc 0x2BB715B7 - Eject 0x299395B7 - AppLauncher 0x29B715B7 - MultiMon 0x2AB195B7 - TaskSwitcher 0x2A9395B7 - Mute 0x2B9595B7 - Vol+ 0x28A395B7 - Vol- 0x28A595B7 - Ch+ 0x289395B7 - Ch- 0x288795B7 - Timer 0x2B8395B7 - 1 0x28B595B7 - 2 0x2BB195B7 - 3 0x28B195B7 - 4 0x2A8595B7 - 5 0x299595B7 - 6 0x2AA595B7 - 7 0x2B9395B7 - 8 0x2A8515B7 - 9 0x2AA115B7 - 0 0x2BA595B7 - ShiftTab 0x28B515B7 - Tab 0x29A115B7 - Red 0x2B8515B7 # MyMovie - Green 0x299195B7 # MyMusic - Blue 0x2BA115B7 # MyPhoto - Yellow 0x28A515B7 # MyTV - Bookmark 0x288515B7 - Thumbnail 0x2AB715B7 - AspectRatio 0x29A595B7 - FullScreen 0x2AA395B7 - Purple 0x29A295B7 # MyDVD - Menu 0x2BA385B7 - Caption 0x298595B7 - Language 0x2B8595B7 - MouseKeyboard 0x299115B7 - SelectSpace 0x2A9315B7 - MouseMenu 0x28B715B7 - MouseRightClick 0x688481B7 - Enter 0x28A195B7 - MouseLeftClick 0x688301B7 - WindowsKey 0x2B8195B7 - Backspace 0x28A115B7 - Mouse_N 0x690281B7 - Mouse_S 0x688291B7 - Mouse_W 0x6A8281B7 - Mouse_E 0x688A81B7 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc b/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc deleted file mode 100644 index 3ad34d8..0000000 --- a/abs/core-testing/live-installer/templates/remotes/imon-pad/lircrc +++ /dev/null @@ -1,240 +0,0 @@ -################################### -# lircrc config as used by Stev391 June 2007 -# Not all of the buttons are configured yet, only the commonly used buttons -################################### - -# Escape -begin - prog = mythtv - button = AppExit - config = Esc - repeat = 3 -end - -# Escape Key 2 -begin - prog = mythtv - button = Esc - config = Esc -end - -# Channel Up -begin - prog = mythtv - button = Ch+ - config = Up - repeat = 3 -end - -# Channel Down -begin - prog = mythtv - button = Ch- - config = Down - repeat = 3 -end - -# Volume Up -begin - prog = mythtv - button = Vol+ - repeat = 3 - config = Right -end - -# Volume Down -begin - prog = mythtv - button = Vol- - repeat = 3 - config = Left -end - -# Enter/Return -begin - prog = mythtv - button = Enter - config = Return -end - -# Menu Button -begin - prog = mythtv - button = Menu - config = M -end - -# Mute -begin - prog = mythtv - button = Mute - config = F9 -end - -# Rewind -begin - prog = mythtv - button = Rewind - config = PgUp -end - -# Fast Forward -begin - prog = mythtv - button = FastForward - config = PgDown -end - -# Play -begin - prog = mythtv - button = Play - config = P -end - -# Pause -begin - prog = mythtv - button = Pause - config = P -end - -# Record -begin - prog = mythtv - button = Record - config = R -end - -# Stop -begin - prog = mythtv - button = Stop - config = O -end - -# Previous Track/Chapter -begin - prog = mythtv - button = PrevChapter - config = Home -end - -# Next Track/Chapter -begin - prog = mythtv - button = NextChapter - config = End -end - -# Jump Point to MythVideo -begin - prog = mythtv - button = MyMovie - config = F12 -end - -# Jump Point to MythMusic -begin - prog = mythtv - button = MyMusic - config = F11 -end - -# Jump Point to LiveTV -begin - prog = mythtv - button = MyTV - config = F10 -end - -# Jump Point to Main Menu -begin - prog = mythtv - button = Multimon - config = F2 -end - -# Jump Point to Myth Gallery -begin - prog = mythtv - button = MyPhoto - config = F3 -end - -# Jump Point to Play DVD -begin - prog = mythtv - button = MyDVD - config = F4 -end - -# Display Information -begin - prog = mythtv - button = Caption - config = I -end - -############################## -# Numbers -############################## -begin - prog = mythtv - button = 0 - config = 0 -end - -begin - prog = mythtv - button = 1 - config = 1 -end - -begin - prog = mythtv - button = 2 - config = 2 -end - -begin - prog = mythtv - button = 3 - config = 3 -end - -begin - prog = mythtv - button = 4 - config = 4 -end - -begin - prog = mythtv - button = 5 - config = 5 -end - -begin - prog = mythtv - button = 6 - config = 6 -end - -begin - prog = mythtv - button = 7 - config = 7 -end - -begin - prog = mythtv - button = 8 - config = 8 -end - -begin - prog = mythtv - button = 9 - config = 9 -end diff --git a/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg b/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/imon-pad/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon deleted file mode 100644 index 6875f3f..0000000 --- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon +++ /dev/null @@ -1,79 +0,0 @@ -# -# contributed by Venky Raju (dev@venky.ws) -# -# brand: Soundgraph -# model no. of remote control: iMON MultiMedian -# -# devices being controlled by this remote: HTPC -# - -begin remote - - name IMON_MultiMedian - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 130 - - header 9000 4500 - one 625 1625 - zero 625 375 - ptrail 625 - repeat 8875 2125 - pre_data_bits 16 - pre_data 0x609F - gap 100000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - App.Exit 0x00000000000000FF - Power 0x000000000000807F - 1 0x00000000000040BF - 2 0x000000000000C03F - 3 0x00000000000020DF - 4 0x000000000000A05F - 5 0x000000000000609F - 6 0x000000000000E01F - 7 0x00000000000010EF - 8 0x000000000000906F - 9 0x00000000000050AF - 0 0x000000000000D02F - Windows 0x00000000000030CF - Menu 0x000000000000B04F - App.Launcher 0x000000000000708F - Function 0x000000000000F00F - Task.Switcher 0x00000000000008F7 - Back 0x0000000000008877 - Select 0x00000000000048B7 - Eject 0x0000000000009867 - Delete 0x00000000000018E7 - Up 0x000000000000C837 - Right 0x0000000000006897 - Down 0x000000000000E817 - Left 0x00000000000028D7 - Enter 0x000000000000A857 - Vol- 0x00000000000058A7 - Vol+ 0x000000000000D827 - Mute 0x00000000000038C7 - Play 0x000000000000B847 - Pause 0x0000000000007887 - Prev 0x000000000000F807 - Next 0x00000000000002FD - Rew 0x000000000000827D - Fwd 0x00000000000042BD - Stop 0x000000000000C23D - Open 0x00000000000022DD - Rec 0x000000000000A25D - Bookmark 0x000000000000629D - Thumbnail 0x000000000000E21D - Aspect 0x00000000000012ED - DVD.Menu 0x000000000000926D - DVD.Caption 0x00000000000052AD - DVD.Language 0x000000000000D22D - Full.Screen 0x00000000000032CD - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad deleted file mode 100644 index e8b8818..0000000 --- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-pad +++ /dev/null @@ -1,84 +0,0 @@ -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.1pre2(imon) on Tue Mar 1 23:15:44 2005 -# -# contributed by Venky Raju -# -# brand: iMON-New -# model no. of remote control: iMON-PAD -# devices being controlled by this remote: -# - -begin remote - - name iMON-PAD - bits 32 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 235965 - min_repeat 1 - toggle_bit 0 - - - begin codes - AppExit 0x288195B7 - Record 0x298115B7 - Play 0x2A8115B7 - SlowMotion 0x29B195B7 - Rewind 0x2A8195B7 - Pause 0x2A9115B7 - FastForward 0x2B8115B7 - PrevChapter 0x2B9115B7 - Stop 0x2B9715B7 - NextChapter 0x298195B7 - Esc 0x2BB715B7 - Eject 0x299395B7 - AppLauncher 0x29B715B7 - MultiMon 0x2AB195B7 - TaskSwitcher 0x2A9395B7 - Mute 0x2B9595B7 - Vol+ 0x28A395B7 - Vol- 0x28A595B7 - Ch+ 0x289395B7 - Ch- 0x288795B7 - Timer 0x2B8395B7 - 1 0x28B595B7 - 2 0x2BB195B7 - 3 0x28B195B7 - 4 0x2A8595B7 - 5 0x299595B7 - 6 0x2AA595B7 - 7 0x2B9395B7 - 8 0x2A8515B7 - 9 0x2AA115B7 - 0 0x2BA595B7 - ShiftTab 0x28B515B7 - Tab 0x29A115B7 - MyMovie 0x2B8515B7 - MyMusic 0x299195B7 - MyPhoto 0x2BA115B7 - MyTV 0x28A515B7 - Bookmark 0x288515B7 - Thumbnail 0x2AB715B7 - AspectRatio 0x29A595B7 - FullScreen 0x2AA395B7 - MyDVD 0x29A295B7 - Menu 0x2BA385B7 - Caption 0x298595B7 - Language 0x2B8595B7 - MouseKeyboard 0x299115B7 - SelectSpace 0x2A9315B7 - MouseMenu 0x28B715B7 - MouseRightClick 0x688481B7 - Enter 0x28A195B7 - MouseLeftClick 0x688301B7 - WindowsKey 0x2B8195B7 - Backspace 0x28A115B7 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc b/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc deleted file mode 100644 index cf6d2fc..0000000 --- a/abs/core-testing/live-installer/templates/remotes/imon/lircd.conf.imon-rsc +++ /dev/null @@ -1,109 +0,0 @@ -# -# contributed by Venky Raju (dev@venky.ws) -# -# brand: Soundgraph -# model no. of remote control: iMON RSC -# -# devices being controlled by this remote: HTPC -# -# Credit: Changwoo Ryu -# -begin remote - - name IMON_RSC - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 130 - - header 9000 4500 - one 625 1625 - zero 625 375 - ptrail 625 - repeat 8875 2125 - pre_data_bits 16 - pre_data 0x0108 - - gap 100000 - - begin codes - App.Exit 0x00000000000008F7 - Power 0x000000000000F40B - ScreenSaver 0x00000000000052AD - Timer 0x000000000000926D - 1 0x0000000000002AD5 - 2 0x000000000000AA55 - 3 0x0000000000006A95 - 4 0x000000000000EA15 - 5 0x0000000000001AE5 - 6 0x0000000000009A65 - 7 0x0000000000005AA5 - 8 0x000000000000DA25 - 9 0x0000000000003AC5 - 0 0x000000000000BA45 - Desktop 0x000000000000817E - Max/Res 0x00000000000041BE - Esc 0x00000000000012ED - Windows 0x000000000000D22D - Menu 0x000000000000C13E - App.Launcher 0x000000000000A25D - Function 0x00000000000021DE - Task.Switcher 0x000000000000629D - Backspace 0x000000000000A15E - Mouse/Keyboard 0x000000000000619E - Space 0x000000000000E11E - Shift.Tab 0x0000000000007887 - Enter 0x00000000000019E6 - Tab 0x000000000000F807 - L.Click 0x000000000000d827 - DragNDrop 0x0000000000006897 - R.Click 0x000000000000b847 - Mute 0x00000000000011ee - Vol- 0x0000000000007a85 - Vol+ 0x000000000000fa05 - Play 0x00000000000032cd - Pause 0x000000000000b24d - Open 0x000000000000f20d - Prev 0x0000000000000af5 - Next 0x0000000000008a75 - Stop 0x000000000000728d - Rew 0x0000000000004ab5 - F.Fwd 0x000000000000ca35 - Full.Screen 0x000000000000916e - end codes - -end remote - -begin remote - - name IMON_RSC_STICK - bits 4 - flags SPACE_ENC - eps 40 - aeps 130 - - header 2125 1875 - one 625 1625 - zero 625 375 - ptrail 625 - - begin codes - STICK_N 0x0 - STICK_S 0x1 - STICK_E 0x2 - STICK_W 0x3 - STICK_NE 0x4 - STICK_SW 0x5 - STICK_SE 0x6 - STICK_NW 0x7 - STICK_NNE 0x8 - STICK_SSW 0x9 - STICK_SEE 0xa - STICK_NWW 0xb - STICK_NEE 0xc - STICK_SWW 0xd - STICK_SSE 0xe - STICK_NNW 0xf - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci b/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci deleted file mode 100644 index 076d032..0000000 --- a/abs/core-testing/live-installer/templates/remotes/iodata/lircd.conf.gvbctv5pci +++ /dev/null @@ -1,68 +0,0 @@ -# -# This is for the remote that I-O Data Co. bundles with its GV-BCTV5/PCI -# -# this config file was automatically generated -# using lirc-0.6.6(gvbctv5pci) on Sun May 11 08:52:40 2003 -# -# contributed by Jens C. Rasmussen (jens.rasmussen@ieee.org) -# -# brand: I-O Data Co. -# model: GV-BCTV5/PCI -# supported devices: This remote control comes with the TV Tuner card -# GV-BCTV5/PCI from I-O Data Co. (Japan) -# - -begin remote - - name GV-BCTV5/PCI - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 149949 - toggle_bit 0 - - - begin codes - TV 0x0000000000000042 - FM 0x0000000000000022 - EPG 0x0000000000000062 - POWER 0x0000000000000002 - 1 0x0000000000000052 - 2 0x0000000000000032 - 3 0x0000000000000072 - 4 0x000000000000004A - 5 0x000000000000002A - 6 0x000000000000006A - 7 0x000000000000005A - 8 0x000000000000003A - 9 0x000000000000007A - 10 0x0000000000000046 - 11 0x0000000000000026 - 12 0x0000000000000066 - LIVE 0x0000000000000012 - TIME_SHIFT 0x000000000000000A - PLAY 0x000000000000001A - MULTI 0x0000000000000006 - VIDEO 0x0000000000000056 - SVIDEO 0x000000000000004E - CHANNEL_PLUS 0x0000000000000036 - CHANNEL_MINUS 0x000000000000002E - VOLUME_PLUS 0x0000000000000076 - VOLUME_MINUS 0x000000000000006E - MUTE 0x0000000000000016 - PICTURE_SIZE 0x000000000000000E - PAUSE 0x000000000000005E - HALT 0x000000000000003E - RECORD 0x000000000000007E - STOP 0x000000000000001E - REWIND 0x0000000000000043 - START 0x0000000000000023 - FORWARD 0x0000000000000063 - SYNC 0x0000000000000003 - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg b/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/km_ready_preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one b/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one deleted file mode 100644 index b962433..0000000 --- a/abs/core-testing/live-installer/templates/remotes/knc_one/lircd.conf.knc_one +++ /dev/null @@ -1,62 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Tue Apr 10 18:39:55 2001 -# -# contributed by Ulrich Mueller -# -# brand: KNC ONE -# model: TV Station (-/SE/PRO/RDS) -# -# brand: Anubis -# model: Typhoon TView Tuner (-/Stereo/RDS) -# - -begin remote - - name lircd.conf - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 199992 - toggle_bit 0 - - - begin codes - TV/FM 0x000000000000001C - OK 0x0000000000000015 - F1 0x000000000000000B - POWER 0x0000000000000012 - AV/TV 0x0000000000000011 - TELETEXT 0x000000000000000F - FULLSCREEN 0x0000000000000013 - MUTE 0x0000000000000010 - 1 0x0000000000000001 - 2 0x0000000000000002 - 3 0x0000000000000003 - 4 0x0000000000000004 - 5 0x0000000000000005 - 6 0x0000000000000006 - 7 0x0000000000000007 - 8 0x0000000000000008 - 9 0x0000000000000009 - 0 0x0000000000000000 - CH+ 0x000000000000001A - CH- 0x000000000000001E - VOL+ 0x000000000000001B - VOL- 0x000000000000001F - SNAPSHOT 0x000000000000000A - 100+ 0x0000000000000017 - RECORD 0x000000000000000D - PAUSE 0x000000000000000E - PLAY 0x000000000000001D - STOP 0x0000000000000019 - MENU 0x0000000000000016 - ESC 0x0000000000000014 - - 0x0000000000000018 - + 0x000000000000000C - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld b/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld deleted file mode 100644 index 280c47d..0000000 --- a/abs/core-testing/live-installer/templates/remotes/kworld/lircd.conf.kworld +++ /dev/null @@ -1,144 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name kworld-878 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - power 0x0000000000007887 - source 0x000000000000E01F - scan 0x00000000000038C7 - mute 0x00000000000018E7 - tv/fm 0x000000000000C03F - 1 0x000000000000807F - 2 0x000000000000D02F - 3 0x000000000000D827 - fm_scan+ 0x000000000000F807 - 4 0x000000000000A05F - 5 0x000000000000906F - 6 0x000000000000A857 - fm_scan- 0x000000000000E817 - 7 0x000000000000609F - 8 0x00000000000050AF - 9 0x00000000000048B7 - fm_freq+ 0x00000000000030CF - 0 0x00000000000040BF - + 0x00000000000008F7 - recall 0x000000000000C837 - fm-freq- 0x00000000000020DF - record 0x00000000000000FF - stop 0x00000000000010EF - play 0x0000000000008877 - minimze 0x000000000000F00F - ch+ 0x000000000000F807 - zoom 0x0000000000009867 - vol- 0x00000000000028D7 - ch- 0x000000000000E817 - vol+ 0x0000000000006897 - snapshot 0x00000000000058A7 - mts 0x000000000000B04F - function- 0x00000000000020DF - function 0x000000000000708F - function+ 0x00000000000030CF - reset 0x000000000000B847 - end codes - -end remote - - -# -# this config file was automatically generated -# using lirc-0.6.6(sa1100) on Sun Feb 23 17:02:27 2003 -# -# contributed by Denes Balatoni -# Modified by Daniel Foote to -# work with remote that came with DVB-T card. -# -# brand: kworld -# model no. of remote control: ? -# devices being controlled by this remote: tv878r tuner card -# - -begin remote - - name KWorld_DVB-T - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 8853 4526 - one 533 1713 - zero 533 589 - ptrail 531 - repeat 8853 2281 - pre_data_bits 16 - pre_data 0x61D6 - gap 107839 - toggle_bit 0 - - - begin codes - ch- 0x0000000000007887 - 7 0x000000000000E01F - preview 0x00000000000038C7 - zoom 0x00000000000018E7 - 3 0x000000000000C03F - 1 0x000000000000807F - epg 0x000000000000D02F - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - 5 0x000000000000A05F - 9 0x000000000000906F - reset 0x000000000000A857 - turnleft 0x000000000000E817 - 6 0x000000000000609F - 0 0x00000000000050AF - power 0x00000000000048B7 - scan 0x00000000000030CF - 2 0x00000000000040BF - mute 0x00000000000008F7 - snap 0x000000000000C837 - 4 0x00000000000020DF - turnup 0x00000000000000FF - 8 0x00000000000010EF - backward 0x0000000000008877 - source 0x000000000000F00F - forward 0x0000000000009867 - pip 0x00000000000028D7 - ch- 0x000000000000E817 - play 0x0000000000006897 - ch+ 0x00000000000058A7 - stop 0x000000000000B04F - function- 0x00000000000020DF - pause 0x000000000000708F - function+ 0x00000000000030CF - rec 0x000000000000B847 - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 deleted file mode 100644 index 3adfd4b..0000000 --- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.PVR2000 +++ /dev/null @@ -1,75 +0,0 @@ -# -# this config file was written on Mon Dec 13 23:51:16 MET 2004 -# by Thomas Reitmayr (treitmayr@yahoo.com) -# -# brand: Leadtek -# model: Y0400052 (bundeled with Winfast PVR2000 TV-card) -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to be a -# limitation of the remote control. -# - - -begin remote - - name PVR2000 - bits 8 - flags SHIFT_ENC - gap 120000 - - begin codes - POWER 0x0000000000000070 - TV 0x0000000000000026 - FM 0x0000000000000027 - DVD 0x0000000000000028 - RED 0x000000000000003B - GREEN 0x000000000000003C - YELLOW 0x000000000000003D - BLUE 0x000000000000003E - TELETEXT 0x000000000000006F - SLEEP 0x0000000000000030 - MUTE 0x0000000000000064 - BOSS_KEY 0x0000000000000039 - CH_UP 0x000000000000007C - CH_DOWN 0x0000000000000060 - VOL_DOWN 0x0000000000000078 - VOL_UP 0x0000000000000074 - ENTER 0x0000000000000063 - CC 0x0000000000000020 - FULLSCREEN 0x0000000000000073 - MENU 0x000000000000003F - SCAN 0x0000000000000021 - REPLAY 0x0000000000000032 - PLAY 0x0000000000000033 - SKIP 0x0000000000000034 - OSD 0x0000000000000022 - BACK 0x0000000000000024 - STOP 0x0000000000000036 - FORWARD 0x0000000000000025 - LANGUAGE 0x0000000000000023 - 1 0x0000000000000075 - 2 0x0000000000000076 - 3 0x0000000000000077 - 4 0x0000000000000079 - 5 0x000000000000007A - 6 0x000000000000007B - 7 0x000000000000007D - 8 0x000000000000007E - 9 0x000000000000007F - 0 0x0000000000000062 - . 0x0000000000000031 - RECALL 0x0000000000000061 - VIDEO 0x000000000000006E - AUDIO 0x000000000000006B - DISPLAY 0x0000000000000066 - SNAPSHOT 0x0000000000000038 - PIP 0x000000000000003A - RECSTOP 0x0000000000000036 - REC 0x0000000000000037 - TIMESHIFT 0x0000000000000035 - - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 deleted file mode 100644 index 47e5b8e..0000000 --- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0007 +++ /dev/null @@ -1,86 +0,0 @@ -# Made by Leandro Lucarella -# -# brand: Leadtek -# model: RM-0007 (bundeled with WinView 601TV card) -# -# Based on Winfast TV200: -# modified by CB -# -# contributed by Erik Christiansson, aka Sci -# www.alphafish.com -# erik@alphafish.com -# -# modifications based on the config files from -# Juan Toledo and -# Markus Lischka -# -# With some modification based on a patch for WinView 601 made by -# Juan FC. -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to -# be a hardware limitation. -# - -begin remote - - name RM-0007 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 100 - - header 9000 4500 - one 629 1617 - zero 629 495 - ptrail 632 - repeat 9000 2250 - pre_data_bits 16 - pre_data 0xC03F - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes -# 1st row of buttons - POWER 0x00000000000000FF - MENU 0x000000000000807F - FM 0x00000000000040BF - PC/TV 0x000000000000C03F -# volume/channel - VOL_UP 0x00000000000020DF - VOL_DOWN 0x00000000000010EF - CH_UP 0x00000000000030CF - CH_DOWN 0x00000000000008F7 -# numbers pad - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - RETURN 0x0000000000008877 - 0 0x00000000000048B7 - DISPLAY 0x000000000000C837 -# unknown icon buttons - HELP 0x00000000000038C7 - SCAN 0x000000000000A857 - OSD 0x0000000000006897 - OPTIONS 0x000000000000E817 -# labeled buttons - MUTE 0x00000000000028D7 - MTS 0x000000000000D827 - VIDEO 0x0000000000007887 - CC 0x000000000000F807 -# color dots buttons - RED 0x00000000000018E7 - GREEN 0x0000000000009867 - YELLOW 0x00000000000058A7 - BLUE 0x000000000000B847 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 deleted file mode 100644 index e0efcba..0000000 --- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircd.conf.RM-0010 +++ /dev/null @@ -1,101 +0,0 @@ -# -# this config file was automatically generated -# using WinLIRC 0.6.4 (LIRC 0.6.1pre3) on Sun Nov 03 14:25:14 2002 -# -# modified by CB -# -# contributed by Erik Christiansson, aka Sci -# www.alphafish.com -# erik@alphafish.com -# -# brand: Leadtek -# model: RM-0010 (bundeled with TV2000 TV-card) -# -# modifications based on the config files from -# Juan Toledo and -# Markus Lischka -# Reza Naima -# -# Only CH_UP, CH_DOWN, VOL_UP and VOL_DOWN will repeat. This seems to -# be a hardware limitation. -# - - -begin remote - - name RM-0010 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 40 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - pre_data_bits 16 - pre_data 0xC03F - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - POWER 0x00000000000000FF - TV/FM 0x00000000000040BF - SCAN 0x000000000000A857 - DISPLAY 0x0000000000006897 - 1 0x000000000000A05F - 2 0x000000000000609F - 3 0x000000000000E01F - 4 0x000000000000906F - 5 0x00000000000050AF - 6 0x000000000000D02F - 7 0x000000000000B04F - 8 0x000000000000708F - 9 0x000000000000F00F - 0 0x00000000000048B7 - RECALL 0x0000000000008877 - ENTER 0x000000000000C837 - CC 0x000000000000F807 - MTS 0x000000000000D827 - FINE_DOWN 0x0000000000009867 - FINE_UP 0x00000000000018E7 - VIDEO 0x0000000000007887 - MUTE 0x00000000000028D7 - CH_UP 0x00000000000030CF - CH_DOWN 0x00000000000008F7 - VOL_DOWN 0x00000000000010EF - VOL_UP 0x00000000000020DF - FULLSCREEN 0x000000000000C03F - -# The following are only supported by the remote control bundled with -# the WinFast TV 2000 XP Deluxe card. - - SLEEP 0x00000000000002FD - BOSS_KEY 0x000000000000926D - RED 0x000000000000D22D - GREEN 0x00000000000032CD - YELLOW 0x000000000000B24D - BLUE 0x000000000000728D - PIP 0x00000000000052AD - . 0x000000000000827D - BACK 0x00000000000042BD - PLAY 0x000000000000C23D - NEXT 0x00000000000022DD - TIMESHIFT 0x000000000000A25D - STOP 0x000000000000629D - REC 0x000000000000E21D - SNAPSHOT 0x00000000000012ED - -# Only found on CoolCommand remote - - REPEAT 0x000000000000884B - TELETEXT 0x000000000000F807 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 deleted file mode 100644 index ef1992a..0000000 --- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0007 +++ /dev/null @@ -1,36 +0,0 @@ -# -# lircmd config file for Leadtek WinView 601TV (RM-0007 remote control). -# -# Made by Leandro Lucarella based on mainstream lirc -# Leadtek WinFast2000TV (RM-0010 remote control). -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * BLUE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_IN * CH_UP -MOVE_OUT * CH_DOWN - -BUTTON1_TOGGLE * RETURN -BUTTON2_TOGGLE * 0 -BUTTON3_TOGGLE * DISPLAY - -BUTTON1_CLICK * MENU -BUTTON1_CLICK * 5 -BUTTON2_CLICK * FM -BUTTON3_CLICK * PC/TV - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 b/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 deleted file mode 100644 index ce0eff4..0000000 --- a/abs/core-testing/live-installer/templates/remotes/leadtek/lircmd.conf.RM-0010 +++ /dev/null @@ -1,36 +0,0 @@ -# -# lircmd config file -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 2 30 5 - -ACTIVATE * SCAN - -MOVE_N * 2 -MOVE_N * CH_UP -MOVE_NE * 3 -MOVE_E * 6 -MOVE_E * VOL_UP -MOVE_SE * 9 -MOVE_S * 8 -MOVE_S * CH_DOWN -MOVE_SW * 7 -MOVE_W * 4 -MOVE_W * VOL_DOWN -MOVE_NW * 1 -MOVE_IN * VIDEO -MOVE_OUT * MUTE - -BUTTON1_TOGGLE * RECALL -BUTTON2_TOGGLE * 0 -BUTTON3_TOGGLE * ENTER - -BUTTON1_CLICK * FULLSCREEN -BUTTON2_CLICK * FINE_DOWN -BUTTON3_CLICK * FINE_UP - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo deleted file mode 100644 index 6402ed0..0000000 --- a/abs/core-testing/live-installer/templates/remotes/life-view/lircd.conf.flyvideo +++ /dev/null @@ -1,87 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.5(sir) on Sun Sep 22 03:04:44 2002 -# -# contributed by Jarek Zuk -# -# brand: LiveView -# devices being controlled by this remote: -# FlyVideo II -# FlyVideo'98 -# FlyVideo 98/FM /2000S -# Flyvideo 98FM (LR50Q) -# Typhoon TView TV/FM Tuner -# - -begin remote - - name flyvideo - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 4500 - pre_data_bits 26 - pre_data 0x01A1F2F - gap 108000 - toggle_bit 0 - - frequency 37916 - duty_cycle 33 - - begin codes - 0 0x000000000000F00F - 1 0x000000000000C03F - 2 0x00000000000020DF - 3 0x000000000000A05F - 4 0x000000000000E01F - 5 0x00000000000010EF - 6 0x000000000000906F - 7 0x000000000000D02F - 8 0x00000000000030CF - 9 0x000000000000B04F - POWER 0x00000000000000FF - MOUSE_MODE 0x000000000000807F - FULL_SCREEN 0x00000000000040BF - CHAN_PLUS 0x00000000000048B7 - CHAN_MINUS 0x000000000000C837 - CANCEL 0x000000000000F807 - ENTER 0x00000000000008F7 - VOL_PLUS 0x00000000000028D7 - VOL_MINUS 0x000000000000E817 - MENU 0x000000000000609F - UP 0x000000000000708F - DOWN 0x0000000000009867 - LEFT 0x000000000000609F - RIGHT 0x000000000000A857 - INC 0x00000000000050AF - DEC 0x0000000000006897 - ESC 0x00000000000058A7 - MUTE 0x000000000000D827 - RETURN 0x00000000000018E7 - CENTER 0x000000000000C837 - - CHANELS 0x00000000000047B8 - REV 0x0000000000008778 - FWD 0x000000000000C738 - VIDEO 0x0000000000008877 - -# from FlyVideo II config file - Audio 0x000000000000A857 -# newly added by Jarek Zuk - SQUARE 0x000000000000B847 - TAB_LEFT 0x0000000000007887 - TAB_RIGHT 0x00000000000038C7 - CENTER 0x000000000000C837 - LEFT 0x00000000000048B7 - - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo deleted file mode 100644 index 71cac36..0000000 --- a/abs/core-testing/live-installer/templates/remotes/life-view/lircmd.conf.flyvideo +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file for FlyVideo98 remote control -# Contributed by Pawel T. Jochym -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -#ACCELERATOR 2 30 5 - -ACTIVATE * MOUSE_MODE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_PLUS -MOVE_OUT * VOL_MINUS - -BUTTON1_CLICK * CANCEL -BUTTON2_CLICK * 0 -BUTTON3_CLICK * ENTER - -BUTTON1_TOGGLE * UP -BUTTON2_TOGGLE * VIDEO -BUTTON3_TOGGLE * INC diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo b/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo deleted file mode 100644 index 2175201..0000000 --- a/abs/core-testing/live-installer/templates/remotes/life-view/lircrc.flyvideo +++ /dev/null @@ -1,131 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Pawel T. Jochym -# -begin - button = MOUSE_MODE - mode = mouse -end -begin - prog = irexec - button = FULL_SCREEN - config = xawtv -geometry 768x576+0+0 -c /dev/video TVP-1 & - mode = tv - flags = once -end -begin - button = ESC - mode = system - flags = once -end -begin system - begin - prog = irexec - button = 1 - button = 2 - button = 3 - button = 6 - button = 3 - button = 6 - config = shutdown -r now - flags = mode - end -end system - -begin tv - begin - prog = irxevent - button = POWER - config = Key q xawtv - flags = mode - end - begin - prog = irxevent - button = FULL_SCREEN - config = Key f xawtv - config = Key f xawtv - repeat = 1 - end - begin - prog = irxevent - button = CHAN_MINUS - repeat = 1 - config = Key Page_Down xawtv - end - begin - prog = irxevent - button = CHAN_PLUS - repeat = 1 - config = Key Page_Up xawtv - end - begin - prog = irxevent - button = MENU - repeat = 1 - config = Key c xawtv - end - begin - prog = irxevent - button = CHANELS - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = irxevent - button = MUTE - config = Key Return xawtv - end - begin - prog = irxevent - button = VOL_PLUS - repeat = 1 - config = Key KP_Add xawtv - end - begin - prog = irxevent - button = VOL_MINUS - repeat = 1 - config = Key KP_Subtract xawtv - end - begin - prog = irexec - button = 1 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = 2 - config = xawtv-remote setstation 1 - end - begin - prog = irexec - button = 3 - config = xawtv-remote setstation 2 - end - begin - prog = irexec - button = 4 - config = xawtv-remote setstation 3 - end - begin - prog = irexec - button = 5 - config = xawtv-remote setstation 4 - end - begin - prog = irexec - button = 6 - config = xawtv-remote setstation 5 - end - begin - prog = irexec - button = 7 - config = xawtv-remote setstation 6 - end - begin - prog = irexec - button = 8 - config = xawtv-remote setstation 7 - end -end tv \ No newline at end of file diff --git a/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg b/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/life-view/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech b/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech deleted file mode 100644 index 1960b6f..0000000 --- a/abs/core-testing/live-installer/templates/remotes/logitech/lircd.conf.logitech +++ /dev/null @@ -1,111 +0,0 @@ -# -# -# contributed by Isaac Lauer -# -# brand: Logitech -# model: Value Infrared Remote Control -# supported devices: -# - -begin remote - - name Logitech - bits 8 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 8 - pre_data 0xA0 - gap 29858 - repeat_bit 0 - - begin codes - POWER 0x0000000000000002 - 1 0x0000000000000015 - 2 0x0000000000000016 - 3 0x0000000000000014 - 4 0x0000000000000018 - 5 0x0000000000000019 - 6 0x0000000000000017 - 7 0x000000000000001C - 8 0x000000000000001B - 9 0x000000000000001A - 0 0x000000000000001D - PAUSE 0x0000000000000013 - EJECT 0x0000000000000011 - SEEK- 0x000000000000000E - PLAY 0x000000000000000F - SEEK+ 0x0000000000000010 - STOP 0x0000000000000012 - HELP 0x0000000000000001 - CH- 0x000000000000000D - CH+ 0x000000000000000A - VOL- 0x000000000000000C - VOL+ 0x0000000000000009 - * 0x000000000000001F - # 0x000000000000001E - MUTE 0x000000000000000B - BUTTONL_DOWN 0x0000000000000039 - BUTTONR_DOWN 0x000000000000003A - BUTTON_UP 0x0000000000000038 - ENTER 0x0000000000000008 - CLOSE 0x0000000000000023 - TV 0x0000000000000004 - GDE 0x0000000000000005 - CD 0x0000000000000006 - MSG 0x0000000000000007 - PHONE 0x0000000000000003 - MOUSE_N 0x0000000000000040 - MOUSE_NNE 0x0000000000000041 - MOUSE_NE 0x0000000000000042 - MOUSE_NEE 0x0000000000000043 - MOUSE_E 0x0000000000000044 - MOUSE_SEE 0x0000000000000045 - MOUSE_SE 0x0000000000000046 - MOUSE_SSE 0x0000000000000047 - MOUSE_S 0x0000000000000048 - MOUSE_SSW 0x0000000000000049 - MOUSE_SW 0x000000000000004A - MOUSE_SWW 0x000000000000004B - MOUSE_W 0x000000000000004C - MOUSE_NWW 0x000000000000004D - MOUSE_NW 0x000000000000004E - MOUSE_NNW 0x000000000000004F - MOUSE_N 0x0000000000000050 - MOUSE_NNE 0x0000000000000051 - MOUSE_NE 0x0000000000000052 - MOUSE_NEE 0x0000000000000053 - MOUSE_E 0x0000000000000054 - MOUSE_SEE 0x0000000000000055 - MOUSE_SE 0x0000000000000056 - MOUSE_SSE 0x0000000000000057 - MOUSE_S 0x0000000000000058 - MOUSE_SSW 0x0000000000000059 - MOUSE_SW 0x000000000000005A - MOUSE_SWW 0x000000000000005B - MOUSE_W 0x000000000000005C - MOUSE_NWW 0x000000000000005D - MOUSE_NW 0x000000000000005E - MOUSE_NNW 0x000000000000005F - MOUSE_N 0x0000000000000060 - MOUSE_NNE 0x0000000000000061 - MOUSE_NE 0x0000000000000062 - MOUSE_NEE 0x0000000000000063 - MOUSE_E 0x0000000000000064 - MOUSE_SEE 0x0000000000000065 - MOUSE_SE 0x0000000000000066 - MOUSE_SSE 0x0000000000000067 - MOUSE_S 0x0000000000000068 - MOUSE_SSW 0x0000000000000069 - MOUSE_SW 0x000000000000006A - MOUSE_SWW 0x000000000000006B - MOUSE_W 0x000000000000006C - MOUSE_NWW 0x000000000000006D - MOUSE_NW 0x000000000000006E - MOUSE_NWW 0x000000000000006F - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech b/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech deleted file mode 100644 index d8067f5..0000000 --- a/abs/core-testing/live-installer/templates/remotes/logitech/lircmd.conf.logitech +++ /dev/null @@ -1,64 +0,0 @@ -# -# lircmd config file for the Logitech control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - -MOVE_N Logitech MOUSE_N -MOVE_N Logitech MOUSE_N - -MOVE_N Logitech MOUSE_NNE -MOVE_NE Logitech MOUSE_NNE - -MOVE_NE Logitech MOUSE_NE -MOVE_NE Logitech MOUSE_NE - -MOVE_E Logitech MOUSE_NEE -MOVE_NE Logitech MOUSE_NEE - -MOVE_E Logitech MOUSE_E -MOVE_E Logitech MOUSE_E - -MOVE_E Logitech MOUSE_SEE -MOVE_SE Logitech MOUSE_SEE - -MOVE_SE Logitech MOUSE_SE -MOVE_SE Logitech MOUSE_SE - -MOVE_S Logitech MOUSE_SSE -MOVE_SE Logitech MOUSE_SSE - -MOVE_S Logitech MOUSE_S -MOVE_S Logitech MOUSE_S - -MOVE_S Logitech MOUSE_SSW -MOVE_SW Logitech MOUSE_SSW - -MOVE_SW Logitech MOUSE_SW -MOVE_SW Logitech MOUSE_SW - -MOVE_W Logitech MOUSE_SWW -MOVE_SW Logitech MOUSE_SWW - -MOVE_W Logitech MOUSE_W -MOVE_W Logitech MOUSE_W - -MOVE_W Logitech MOUSE_NWW -MOVE_NW Logitech MOUSE_NWW - -MOVE_NW Logitech MOUSE_NW -MOVE_NW Logitech MOUSE_NW - -MOVE_N Logitech MOUSE_NNW -MOVE_NW Logitech MOUSE_NNW - -BUTTON1_DOWN Logitech BUTTONL_DOWN -BUTTON2_DOWN Logitech BUTTONR_DOWN - -BUTTON1_UP Logitech BUTTON_UP -BUTTON2_UP Logitech BUTTON_UP diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf deleted file mode 100644 index ec3b73e..0000000 --- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd-mceusb.conf +++ /dev/null @@ -1,88 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - - begin codes - -# starts at af - Radio 0x00007baf - Print 0x00007bb1 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 -# no ba - d8 - Guide 0x00007bd9 - LiveTV 0x00007bda - DVD 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf - Down 0x00007be0 - Up 0x00007be1 -# no e2,e3 - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChanDown 0x00007bec - ChanUp 0x00007bed - VolDown 0x00007bee - VolUp 0x00007bef - More 0x00007bf0 - Mute 0x00007bf1 - Home 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb b/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb deleted file mode 100644 index 041c2cb..0000000 --- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircd.conf.mceusb +++ /dev/null @@ -1,104 +0,0 @@ -# -# RC-6 config file -# -# source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm -# http://home.hccnet.nl/m.majoor/pronto.pdf -# -# used by: Philips -# -######### -# -# Philips Media Center Edition remote control -# For use with the USB MCE ir receiver -# -# Dan Conti dconti|acm.wwu.edu -# -# Updated with codes for MCE 2005 Remote additional buttons -# *, #, Teletext, Red, Green, Yellow & Blue Buttons -# Note: TV power button transmits no code until programmed. -# Updated 12th September 2005 -# Graham Auld - mce|graham.auld.me.uk -# -# Radio, Print, RecTV are only available on the HP Media Center remote control -# - -begin remote - - name mceusb - bits 16 - flags RC6|CONST_LENGTH - eps 30 - aeps 100 - - header 2667 889 - one 444 444 - zero 444 444 - pre_data_bits 21 - pre_data 0x37FF0 - gap 105000 - toggle_bit 22 - rc6_mask 0x100000000 - - - begin codes - - Blue 0x00007ba1 - Yellow 0x00007ba2 - Green 0x00007ba3 - Red 0x00007ba4 - Teletext 0x00007ba5 - -# starts at af - Radio 0x00007baf - Print 0x00007bb1 - Videos 0x00007bb5 - Pictures 0x00007bb6 - RecTV 0x00007bb7 - Music 0x00007bb8 - TV 0x00007bb9 -# no ba - d8 - - Guide 0x00007bd9 - LiveTV 0x00007bda - DVD 0x00007bdb - Back 0x00007bdc - OK 0x00007bdd - Right 0x00007bde - Left 0x00007bdf - Down 0x00007be0 - Up 0x00007be1 - - Star 0x00007be2 - Hash 0x00007be3 - - Replay 0x00007be4 - Skip 0x00007be5 - Stop 0x00007be6 - Pause 0x00007be7 - Record 0x00007be8 - Play 0x00007be9 - Rewind 0x00007bea - Forward 0x00007beb - ChanDown 0x00007bec - ChanUp 0x00007bed - VolDown 0x00007bee - VolUp 0x00007bef - More 0x00007bf0 - Mute 0x00007bf1 - Home 0x00007bf2 - Power 0x00007bf3 - Enter 0x00007bf4 - Clear 0x00007bf5 - Nine 0x00007bf6 - Eight 0x00007bf7 - Seven 0x00007bf8 - Six 0x00007bf9 - Five 0x00007bfa - Four 0x00007bfb - Three 0x00007bfc - Two 0x00007bfd - One 0x00007bfe - Zero 0x00007bff - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb b/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb deleted file mode 100644 index 3738bfa..0000000 --- a/abs/core-testing/live-installer/templates/remotes/mceusb/lircrc-mceusb +++ /dev/null @@ -1,393 +0,0 @@ -# lircrc.mceusb - -################### -# -# MythTV -# -################### -begin - prog = mythtv - button = One - config = 1 -end - -begin - prog = mythtv - button = Two - config = 2 -end - -begin - prog = mythtv - button = Three - config = 3 -end - -begin - prog = mythtv - button = Four - config = 4 -end - -begin - prog = mythtv - button = Five - config = 5 -end - -begin - prog = mythtv - button = Six - config = 6 -end - -begin - prog = mythtv - button = Seven - config = 7 -end - -begin - prog = mythtv - button = Eight - config = 8 -end - -begin - prog = mythtv - button = Nine - config = 9 -end - -begin - prog = mythtv - button = Zero - config = 0 -end - -begin - prog = mythtv - button = Back - config = Esc -end - -begin - prog = mythtv - button = Guide - config = M -end - -begin - prog = mythtv - button = More - config = I -end - -begin - prog = mythtv - button = VolDown - config = F10 -end - -begin - prog = mythtv - button = VolUp - config = F11 -end - -begin - prog = mythtv - button = Up - config = Up -end - -begin - prog = mythtv - button = Down - config = Down -end - -begin - prog = mythtv - button = Left - config = Left -end - -begin - prog = mythtv - button = Right - config = Right -end - -begin - prog = mythtv - button = Play - config = Return -end - -begin - prog = mythtv - button = OK - config = Return -end - -begin - prog = mythtv - button = Mute - config = | -end - -begin - prog = mythtv - button = Rewind - config = Left -end - -begin - prog = mythtv - button = Forward - config = Right -end - -begin - prog = mythtv - button = Record - config = R -end - -begin - prog = mythtv - button = Stop - config = O -end - -begin - prog = mythtv - button = Pause - config = P -end - -# Use for backwards commercial skip -begin - prog = mythtv - button = Replay - config = Q -end - -# Use for forward commercial skip -begin - prog = mythtv - button = Skip - config = Z -end - - -################### -# -# MPlayer -# -################### -begin - prog = mplayer - button = Stop - config = quit -end - -begin - prog = mplayer - button = Play - config = seek +1 -end - -begin - prog = mplayer - button = More - config = osd -end - -begin - prog = mplayer - button = Replay - config = seek -10 - repeat = 1 -end - -begin - prog = mplayer - button = Skip - config = seek +10 - repeat = 1 -end - -begin - prog = mplayer - button = Rewind - config = seek -30 - repeat = 1 -end - -begin - prog = mplayer - button = Forward - config = seek +30 - repeat = 1 -end - -begin - prog = mplayer - button = Pause - config = pause -end - -begin - prog = mplayer - button = VolUp - config = volume +1 - repeat = 1 -end - -begin - prog = mplayer - button = VolDown - config = volume -1 - repeat = 1 -end - -begin - prog = mplayer - button = Mute - config = mute -end - -################### -# -# Xine -# -################### -# Xine lirc setup -begin -prog = xine -button = Play -repeat = 3 -config = Play -end - -begin -prog = xine -button = Stop -repeat = 3 -config = Stop -end - -begin -prog = xine -button = Back -repeat = 3 -config = Quit -end - -begin -prog = xine -button = Pause -repeat = 3 -config = Pause -end - -begin -prog = xine -button = Up -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = Down -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = Left -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = Right -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = Home -repeat = 3 -config = Menu -end - -begin -prog = xine -button = Forward -repeat = 3 -config = SpeedFaster -end - -begin -prog = xine -button = Rewind -repeat = 3 -config = SpeedSlower -end - -begin -prog = xine -button = VolUp -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = VolDown -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = Mute -repeat = 3 -config = Mute -end - -begin -prog = xine -button = ChanUp -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = ChanDown -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = More -repeat = 3 -config = OSDStreamInfos -end - diff --git a/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg b/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg deleted file mode 100644 index 0aa6a4a..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/mceusb/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg b/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg deleted file mode 100644 index 1d887dd..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/no_remote/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell b/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell deleted file mode 100644 index b63ab25..0000000 --- a/abs/core-testing/live-installer/templates/remotes/packard_bell/lircd.conf.packard_bell +++ /dev/null @@ -1,94 +0,0 @@ -# Config file for Packard Bell Remotes (with repeat codes!) -# created by Samuel Wood (sjw@umr.edu) -# -# brand: Packard Bell Remote -# model: El Cheapo Packard Bell Remote -# -# This is a config file for the cheap excess Packard Bell remotes -# you sometimes can buy from online auctions like www.onsale.com. -# -# The receiver that comes with it hooks into the serial port and works -# fine with lirc 0.5.4. -# -# The receiver that comes with the remote is near garbage. If -# you don't point almost directly at it, it will not detect. But -# it's simpler than building your own. :-) -# -# Repeat works fine for me. You just have to modify or add the -# "repeat=" lines in your .lircrc. -# -# irrecord was used to generate the file, then I modified and -# added repeat codes. -# -# The button names used are identical to what was printed on the -# remote, except for the number pads (using actual numbers like -# "1" and so forth did not seem to work. Similarly, '*' is Star -# and '#' is Hash. LMB and RMB refer to the two mousepad buttons -# on the left and right respectively. -# -# I still need to modify the gap setting. Right now, if you don't -# hold the button down long enough, it may not register, but if -# you hold it too long, it will detect a repeat or two. Feel free -# to modify this to work better. If you get it to work better, send -# me a copy. :-) - -begin remote - - name PackBell - bits 15 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9065 4500 - one 597 532 - zero 597 1643 - ptrail 597 - pre_data_bits 16 - pre_data 0xF708 - post_data_bits 1 - post_data 0x0 - gap 107000 - repeat_bit 0 - repeat 9050 2250 - - begin codes - Help 0x0000000000006F90 - Phone 0x0000000000004FB0 - Message 0x0000000000006E91 - SRS 0x0000000000004EB1 - CD 0x0000000000002FD0 - Aux1 0x0000000000000FF0 - Aux2 0x0000000000002ED1 - Aux3 0x0000000000000EF1 - LMB 0x00000000000023DC - RMB 0x000000000000639C - Up 0x00000000000037C8 - Down 0x00000000000057A8 - Left 0x0000000000007788 - Right 0x00000000000017E8 - Menu 0x0000000000007B84 - Mute 0x0000000000003BC4 - Enter 0x00000000000047B8 - CHUp 0x00000000000027D8 - CHDown 0x0000000000006798 - VolUp 0x0000000000005BA4 - VolDown 0x0000000000001BE4 - Display 0x00000000000007F8 - One 0x0000000000005EA1 - Two 0x0000000000001EE1 - Three 0x0000000000000BF4 - Four 0x0000000000007E81 - Five 0x0000000000003EC1 - Six 0x0000000000004BB4 - Seven 0x0000000000005FA0 - Eight 0x0000000000001FE0 - Nine 0x0000000000002BD4 - Zero 0x0000000000003FC0 - Star 0x0000000000007F80 - Hash 0x0000000000006B94 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak deleted file mode 100644 index 0a11e58..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircd.conf.pcmak +++ /dev/null @@ -1,116 +0,0 @@ -# -# -# contributed by P_awe_L pablozrudnika@wp.pl -# -# brand: PC MAK/MINIMAK LASER/MINIMAK -# model: Value Infrared Remote Control -# supported devices: PC MAK receiver -# - -begin remote - - name PC_MAK - bits 8 - flags SPACE_ENC|CONST_LENGTH - eps 15 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 8 - pre_data 0xAA - gap 100000 - repeat_bit 0 - - begin codes - HOME 0x0000000000000001 - ARROW_UP 0x0000000000000002 - PG_UP 0x0000000000000003 - ARROW_LEFT 0x0000000000000004 - ENTER 0x0000000000000005 - ARROW_RIGHT 0x0000000000000006 - END 0x0000000000000007 - ARROW_DOWN 0x0000000000000008 - PG_DN 0x0000000000000009 - SPACE 0x000000000000000A - TAB 0x000000000000000B - ESC 0x000000000000000C - ALT 0x000000000000000D - PLAYLIST 0x000000000000000E - LOAD 0x000000000000000F - MOUSE_N 0x0000000000000010 - MOUSE_NE 0x0000000000000011 - MOUSE_E 0x0000000000000012 - MOUSE_SE 0x0000000000000013 - MOUSE_S 0x0000000000000014 - MOUSE_SW 0x0000000000000015 - MOUSE_W 0x0000000000000016 - MOUSE_NW 0x0000000000000017 - FULLSCREEN 0x0000000000000018 - BUTTONL_DOWN 0x0000000000000019 - BUTTONR_DOWN 0x000000000000001A - POWER 0x000000000000001B - A 0x000000000000001C - B 0x000000000000001D - C 0x000000000000001E - D 0x000000000000001F - VOL_DOWN 0x0000000000000020 - MUTE 0x0000000000000021 - VOL_UP 0x0000000000000022 - PLAY 0x0000000000000024 - PREV 0x0000000000000026 - PAUSE 0x0000000000000027 - NEXT 0x0000000000000028 - SKIP_BACK 0x0000000000000029 - STOP 0x000000000000002A - SKIP_FORW 0x000000000000002B - 1 0x0000000000000041 - 2 0x0000000000000042 - 3 0x0000000000000043 - 4 0x0000000000000044 - 5 0x0000000000000045 - 6 0x0000000000000046 - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x000000000000004A - sTAB 0x000000000000004B - sESC 0x000000000000004C - sALT 0x000000000000004D - sPLAYLIST 0x000000000000004E - TXT 0x000000000000004F - sMOUSE_N 0x0000000000000050 - sMOUSE_NE 0x0000000000000051 - sMOUSE_E 0x0000000000000052 - sMOUSE_SE 0x0000000000000053 - sMOUSE_S 0x0000000000000054 - sMOUSE_SW 0x0000000000000055 - sMOUSE_W 0x0000000000000056 - sMOUSE_NW 0x0000000000000057 - sOK 0x0000000000000058 - BUTTONL_UP 0x0000000000000059 - BUTTONR_UP 0x000000000000005A - EXIT 0x000000000000005B - E 0x000000000000005C - F 0x000000000000005D - G 0x000000000000005E - H 0x000000000000005F - sVOL_DOWN 0x0000000000000060 - sMUTE 0x0000000000000061 - sVOL_UP 0x0000000000000062 - sPLAY 0x0000000000000064 - sPREV 0x0000000000000066 - sPAUSE 0x0000000000000067 - sNEXT 0x0000000000000068 - ZOOM- 0x0000000000000069 - HELP 0x000000000000006A - ZOOM+ 0x000000000000006B - MM_PLAY 0x000000000000002F - MM_PREV 0x0000000000000030 - MM_NEXT 0x0000000000000031 - MM_PAUSE 0x000000000000005F - MM_BACK 0x0000000000000075 - MM_FORW 0x0000000000000079 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak deleted file mode 100644 index d7c8dcf..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircmd.conf.pcmak +++ /dev/null @@ -1,29 +0,0 @@ -# -# lircmd config file for the PC_MAK control -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 25 2 - -#ACTIVATE * MENU - -MOVE_N PC_MAK MOUSE_N -MOVE_NE PC_MAK MOUSE_NE - -MOVE_E PC_MAK MOUSE_E -MOVE_SE PC_MAK MOUSE_SE - -MOVE_S PC_MAK MOUSE_S -MOVE_SW PC_MAK MOUSE_SW - -MOVE_W PC_MAK MOUSE_W -MOVE_NW PC_MAK MOUSE_NW - -BUTTON1_CLICK PC_MAK BUTTONL_DOWN -BUTTON3_CLICK PC_MAK BUTTONR_DOWN - -BUTTON1_TOGGLE PC_MAK BUTTONL_UP -BUTTON3_TOGGLE PC_MAK BUTTONR_UP diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak b/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak deleted file mode 100644 index 414e38a..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pcmak/lircrc.pcmak +++ /dev/null @@ -1,1310 +0,0 @@ -##################################################################### -# contributed by P_awe_L pablozrudnika@wp.pl -##################################################################### -# -# XMMS -# -##################################################################### -begin xmms - begin - prog = irxevent - button = LOAD - config = Key shift-L xmms - end - begin - prog = xmms - button = play - config = PLAY - end - begin - prog = irxevent - remote = * - button = PLAYLIST - config = Key alt-e XMMS - end - begin - prog = irxevent - remote = * - button = FULLSCREEN - config = Key ctrl-d XMMS - end - begin - prog = xmms - button = TXT - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = pause - config = PAUSE - end - begin - prog = xmms - button = stop - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - end - begin - prog = xmms - button = NEXT - config = NEXT - end - begin - prog = xmms - button = PREV - config = PREV - end - begin - prog = xmms - button = SKIP_FORW - repeat = 2 - config = FWD 3 - end - begin - prog = xmms - button = SKIP_BACK - repeat = 2 - config = BWD 3 - end - begin - prog = xmms - button = VOL_UP - repeat = 2 - config = VOL_UP 5 - end - begin - prog = xmms - remote = * - button = H - repeat = 2 - config = VOL_DOWN 5 - end -end xmms -##################################################################### -# -# MPlayer -# -##################################################################### -begin mplayer - begin - prog = mplayer - remote = * - button = PLAYLIST - config = gui_playlist - end - begin - prog = mplayer - remote = * - button = LOAD - config = gui_loadfile - end - begin - prog = mplayer - remote = * - button = TXT - config = gui_loadsubtitle - end - begin - prog = mplayer - remote = * - button = FULLSCREEN - config = vo_fullscreen - end - begin - prog = mplayer - remote = * - button = MUTE - config = mute - end - begin - prog = mplayer - remote = * - button = SKIP_FORW - repeat = 1 - config = seek +10 - end - begin - prog = mplayer - remote = * - button = VOL_DOWN - repeat = 1 - config = volume -1 - end - begin - prog = mplayer - remote = * - button = VOL_UP - repeat = 1 - config = volume 1 - end - begin - prog = mplayer - remote = * - button = SKIP_BACK - repeat = 1 - config = seek -10 - end - begin - prog = mplayer - button = play - config = pause - end - begin - prog = mplayer - button = pause - config = pause - end - begin - prog = mplayer - button = stop - config = seek 0 1\npause - end - begin - prog = mplayer - button = NEXT - config = pt_step 1 - end - begin - prog = mplayer - button = PREV - config = pt_step -1 - end - begin - prog = mplayer - button = EXIT - config = quit - end -end mplayer -##################################################################### -# -# GQview -# -##################################################################### -begin gqview - begin - prog = irxevent - remote = * - button = EXIT - config = Key ctrl-q GQview - end - begin - prog = irxevent - remote = * - button = FULLSCREEN - config = Key v GQview - end - begin - prog = irxevent - remote = * - button = PREV - repeat = 5 - config = Key Prior GQview - end - begin - prog = irxevent - remote = * - button = SKIP_BACK - config = Key Home GQview - end - begin - prog = irxevent - remote = * - button = SKIP_FORW - config = Key End GQview - end - begin - prog = irxevent - remote = * - button = NEXT - repeat = 5 - config = Key Next GQview - end - begin - prog = irxevent - button = ZOOM- - repeat = 5 - config = Key minus GQview - end - begin - prog = irxevent - button = ZOOM+ - repeat = 5 - config = Key plus GQview - end - begin - prog = irxevent - button = C - config = Key s GQview - end - begin - prog = irxevent - button = LOAD - config = Key o GQview - end -end gqview -##################################################################### -# -# Sterowanie Xwindow Linuxa -# -##################################################################### -begin linux - begin - prog = irexec - button = PAUSE - config = xscreensaver-command -activate - end - begin - prog = irxevent - button = sNEXT - config = Key alt-Escape RootWindow - end - begin - prog = irxevent - button = sPREV - config = Key alt-shift-Escape RootWindow - end - begin - prog = irexec - button = STOP - config = xset dpms force off - end - begin - prog = irexec - button = PLAY - config = xset dpms force on - end - begin - prog = irexec - button = EXIT - config = poweroff - end -end linux -##################################################################### -# -# Xine -# -##################################################################### -# Reduce the output window size. -begin xine - begin - prog = xine - button = xxxxx - config = WindowReduce - end - # Enlarge the output window size. - begin - prog = xine - button = xxxxx - config = WindowEnlarge - end - # Select next sub picture (subtitle) channel. - begin - prog = xine - button = NEXT - config = SpuNext - end - # Select previous sub picture (subtitle) channel. - begin - prog = xine - button = PREV - config = SpuPrior - end - # Visibility toggle of control window. - begin - prog = xine - button = xxxxx - config = ControlShow - end - # Visibility toggle of output window visibility. - begin - prog = xine - button = xxxxx - config = ToggleWindowVisibility - end - # Select next audio channel. - begin - prog = xine - button = xxxxx - config = AudioChannelNext - end - # Select previous audio channel. - begin - prog = xine - button = xxxxx - config = AudioChannelPrior - end - # Visibility toggle of playlist editor window. - begin - prog = xine - button = PLAYLIST - config = PlaylistEditor - end - # Playback pause toggle. - begin - prog = xine - button = PAUSE - config = Pause - end - # Visibility toggle of UI windows. - begin - prog = xine - button = xxxxx - config = ToggleVisiblity - end - # Fullscreen toggle. - begin - prog = xine - button = FULLSCREEN - config = ToggleFullscreen - end - # Aspect ratio values toggle. - begin - prog = xine - button = xxxxx - config = ToggleAspectRatio - end - # Interlaced mode toggle. - begin - prog = xine - button = xxxxx - config = ToggleInterleave - end - # Quit the program. - begin - prog = irxevent - button = EXIT - config = Key q xine - end - # Start playback. - begin - prog = xine - button = PLAY - config = Play - end - # Visibility toggle of the setup window. - begin - prog = xine - button = xxxxx - config = SetupShow - end - # Stop playback. - begin - prog = xine - button = STOP - config = Stop - end - # Select and play next mrl in the playlist. - begin - prog = xine - button = xxxxx - config = NextMrl - end - # Select and play previous mrl in the playlist. - begin - prog = xine - button = xxxxx - config = PriorMrl - end - # Eject the current medium. - begin - prog = xine - button = xxxxx - config = Eject - end - # Set position to beginning of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition0% - end - # Set position to 10% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition10% - end - # Set position to 20% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition20% - end - # Set position to 30% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition30% - end - # Set position to 40% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition40% - end - # Set position to 50% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition50% - end - # Set position to 60% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition60% - end - # Set position to 70% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition70% - end - # Set position to 80% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition80% - end - # Set position to 90% of current stream. - begin - prog = xine - button = xxxxx - config = SetPosition90% - end - # Set position to -60 seconds in current stream. - begin - prog = xine - button = xxxxx - config = SeekRelative-60 - end - # Set position to +60 seconds in current stream. - begin - prog = xine - button = xxxxx - config = SeekRelative+60 - end - # Set position to -15 seconds in current stream. - begin - prog = xine - button = SKIP_BACK - config = SeekRelative-15 - end - # Set position to +15 seconds in current stream. - begin - prog = xine - button = SKIP_FORW - config = SeekRelative+15 - end - # Visibility toggle of mrl browser window. - begin - prog = xine - button = xxxxx - config = MrlBrowser - end - # Audio muting toggle. - begin - prog = xine - button = MUTE - config = Mute - end - # Change audio syncing. - begin - prog = xine - button = xxxxx - config = AudioVideoDecay+ - end - # Change audio syncing. - begin - prog = xine - button = xxxxx - config = AudioVideoDecay- - end - # Reset audio video syncing offset. - begin - prog = xine - button = xxxxx - config = AudioVideoDecayReset - end - # Increment playback speed. - begin - prog = xine - button = xxxxx - config = SpeedFaster - end - # Decrement playback speed. - begin - prog = xine - button = xxxxx - config = SpeedSlower - end - # Increment audio volume. - begin - prog = xine - button = VOL_UP - config = Volume+ - end - # Decrement audio volume. - begin - prog = xine - button = VOL_DOWN - config = Volume- - end - # Take a snapshot (Internal image fetch and save). - begin - prog = xine - button = xxxxx - config = Snapshot - end - # Resize output window to stream size1:1. - begin - prog = xine - button = xxxxx - config = Zoom1:1 - end - # Grab pointer toggle. - begin - prog = xine - button = xxxxx - config = GrabPointer - end - # Menu 1 event. - begin - prog = xine - button = xxxxx - config = EventMenu1 - end - # Menu 2 event. - begin - prog = xine - button = xxxxx - config = EventMenu2 - end - # Menu 3 event. - begin - prog = xine - button = xxxxx - config = EventMenu3 - end - # Up event. - begin - prog = xine - button = xxxxx - config = EventUp - end - # Down event. - begin - prog = xine - button = xxxxx - config = EventDown - end - # Left event. - begin - prog = xine - button = xxxxx - config = EventLeft - end - # Right event. - begin - prog = xine - button = xxxxx - config = EventRight - end - # Previous event. - begin - prog = xine - button = xxxxx - config = EventPrior - end - # Next event. - begin - prog = xine - button = xxxxx - config = EventNext - end - # Previous angle event. - begin - prog = xine - button = xxxxx - config = EventAnglePrior - end - # Next angle event. - begin - prog = xine - button = xxxxx - config = EventAngleNext - end - # Select event. - begin - prog = xine - button = xxxxx - config = EventSelect - end - # Zoom into video. - begin - prog = xine - button = xxxxx - config = ZoomIn - end - # Zoom out of video. - begin - prog = xine - button = xxxxx - config = ZoomOut - end - # Zoom into video horizontally, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomInX - end - # Zoom out of video horizontally, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomOutX - end - # Zoom into video vertically, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomInY - end - # Zoom out of video vertically, distorting aspect ratio. - begin - prog = xine - button = xxxxx - config = ZoomOutY - end - # Reset zooming. - begin - prog = xine - button = xxxxx - config = ZoomReset - end - # Toggle TV modes on the DXR3 - begin - prog = xine - button = xxxxx - config = ToggleTVmode - end - # Visibility toggle of log viewer - begin - prog = xine - button = xxxxx - config = ViewlogShow - end -end xine -##################################################################### -# -# XAWTV -# -##################################################################### -begin xawtv - begin - prog = xawtv - remote = * - button = NEXT - config = setstation next - end - begin - prog = xawtv - remote = * - button = PREV - config = setstation prev - end - begin - prog = xawtv - remote = * - button = VOL_UP - config = volume inc - end - begin - prog = xawtv - remote = * - button = VOL_DOWN - config = volume dec - end - begin - prog = xawtv - remote = * - button = MUTE - config = volume mute - end - begin - prog = xawtv - remote = * - button = FULLSCREEN - config = fullscreen toggle - flags = once - end - begin - prog = xawtv - remote = * - button = PLAYLIST - config = setinput next - end - begin - prog = xawtv - remote = * - button = EXIT - config = quit - flags = once - end - begin - prog = xawtv - remote = * - button = ARROW_UP - config = keypad 1 - end - begin - prog = xawtv - remote = * - button = ARROW_UP - config = keypad 2 - end - begin - prog = xawtv - remote = * - button = PG_UP - config = keypad 3 - end - begin - prog = xawtv - remote = * - button = ARROW_LEFT - config = keypad 4 - end - begin - prog = xawtv - remote = * - button = ENTER - config = keypad 5 - end - begin - prog = xawtv - remote = * - button = ARROW_RIGHT - config = keypad 6 - end - begin - prog = xawtv - remote = * - button = END - config = keypad 7 - end - begin - prog = xawtv - remote = * - button = ARROW_DOWN - config = keypad 8 - end - begin - prog = xawtv - remote = * - button = PG_DN - config = keypad 9 - end - begin - prog = xawtv - remote = * - button = SPACE - config = keypad 0 - end -end xawtv -##################################################################### -# -# Xpdf -# -##################################################################### -begin xpdf - begin - prog = irxevent - remote = * - button = LOAD - config = Key o xpdf - end - begin - prog = irxevent - remote = * - button = PREV - config = Key p xpdf - end - begin - prog = irxevent - remote = * - button = NEXT - config = Key n xpdf - end - begin - prog = irxevent - remote = * - button = SKIP_BACK - config = Key BackSpace xpdf - end - begin - prog = irxevent - remote = * - button = SKIP_FORW - config = Key space xpdf - end - begin - prog = irxevent - remote = * - button = ZOOM- - config = Key minus xpdf - end - begin - prog = irxevent - remote = * - button = ZOOM+ - config = Key KP_Add xpdf - end - begin - prog = irxevent - remote = * - button = sPREV - config = Key z xpdf - end - begin - prog = irxevent - remote = * - button = sNEXT - config = Key w xpdf - end - begin - prog = irxevent - remote = * - button = EXIT - config = Key q xpdf - end -end xpdf -##################################################################### -# -# FREEVO -# In freevo_config.py variable LIRCRC have to show this file -# eg. LIRCRC = '/home/john/.lircrc' -##################################################################### -begin freevo - begin - prog = irexec - remote = * - button = POWER - config = freevo stop - end - begin - prog = freevo - remote = * - button = PLAYLIST - config = DISPLAY - end - begin - prog = freevo - remote = * - button = sPLAYLIST - config = SUBTITLE - end - begin - prog = freevo - remote = * - button = BUTTONR_DOWN - config = EXIT - end - begin - prog = freevo - remote = * - button = MOUSE_N - config = UP - end - begin - prog = freevo - remote = * - button = MOUSE_S - config = DOWN - end - begin - prog = freevo - remote = * - button = MOUSE_W - config = LEFT - end - begin - prog = freevo - remote = * - button = MOUSE_E - config = RIGHT - end - begin - prog = freevo - remote = * - button = BUTTONL_DOWN - config = SELECT - end - begin - prog = freevo - remote = * - button = FULLSCREEN - config = SELECT - end - begin - prog = freevo - remote = * - button = MUTE - config = MUTE - end - begin - prog = freevo - remote = * - button = VOL_UP - config = VOL+ - end - begin - prog = freevo - remote = * - button = VOL_DOWN - config = VOL- - end - begin - prog = freevo - remote = * - button = NEXT - config = CH+ - end - begin - prog = freevo - remote = * - button = PREV - config = CH- - end - begin - prog = freevo - remote = * - button = sPREV - config = PREV_CH - end - begin - prog = freevo - button = sNEXT - config = NEXT_CH - end - begin - prog = freevo - button = SKIP_BACK - config = REW - end - begin - prog = freevo - button = SKIP_FORW - config = FFWD - end - begin - prog = freevo - remote = * - button = PLAY - config = PLAY - end - begin - prog = freevo - remote = * - button = PAUSE - config = PAUSE - end - begin - prog = freevo - remote = * - button = STOP - config = STOP - end - begin - prog = freevo - remote = * - button = sPLAY - config = REC - end - begin - prog = freevo - remote = * - button = HELP - repeat = 10 - config = EJECT - end - begin - prog = freevo - remote = * - button = HOME - config = - end - begin - prog = freevo - remote = * - button = ARROW_UP - config = - end - begin - prog = freevo - remote = * - button = PG_UP - config = - end - begin - prog = freevo - remote = * - button = ARROW_LEFT - config = - end - begin - prog = freevo - remote = * - button = ENTER - config = - end - begin - prog = freevo - remote = * - button = ARROW_RIGHT - config = - end - begin - prog = freevo - remote = * - button = END - config = - end - begin - prog = freevo - remote = * - button = ARROW_DOWN - config = - end - begin - prog = freevo - remote = * - button = PG_DN - config = - end - begin - prog = freevo - remote = * - button = SPACE - config = - end - begin - prog = freevo - remote = * - button = TAB - config = - end - begin - prog = freevo - remote = * - button = ESC - config = - end - begin - prog = freevo - remote = * - button = ALT - config = - end -end freevo -##################################################################### -# -# Wybor aplikacji -# -##################################################################### -begin - prog = irexec - button = A - config = xmms& - mode = xmms -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = B - config = URUCH=`ps ahx |grep gmplayer |grep -v grep`; if [ -z "$URUCH" ]; then `gmplayer &>/dev/null &` ; fi - mode = mplayer -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = C - config = URUCH=`ps ahx |grep gqview |grep -v grep`; if [ -z "$URUCH" ]; then `gqview &>/dev/null &` ; fi - mode = gqview -end -begin - prog = none - button = D - mode = linux -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - remote = * - button = E - config = URUCH=`ps ahx |grep xine |grep -v grep | grep -v xinetd`; if [ -z "$URUCH" ]; then `xine &>/dev/null &` ; fi - mode = xine -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = F - config = URUCH=`ps ahx |grep xawtv |grep -v grep`; if [ -z "$URUCH" ]; then `xawtv &>/dev/null &` ; fi - mode = xawtv -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - button = G - config = URUCH=`ps ahx |grep xpdf |grep -v grep`; if [ -z "$URUCH" ]; then `xpdf &>/dev/null &` ; fi - mode = xpdf -end -#tag:Uruchom program tylko raz!! -begin - prog = irexec - remote = * - button = H - config = freevo& - mode = freevo -end -##################################################################### -# -# Klawisze Globalne -# -##################################################################### -begin - prog = irxevent - button = HOME - config = Key Home CurrentWindow -end -begin - prog = irxevent - button = ARROW_UP - repeat = 5 - config = Key Up CurrentWindow -end -begin - prog = irxevent - button = PG_UP - repeat = 5 - config = Key Page_Up CurrentWindow -end -begin - prog = irxevent - button = ARROW_LEFT - repeat = 5 - config = Key Left CurrentWindow -end -begin - prog = irxevent - button = ENTER - config = Key Return CurrentWindow -end -begin - prog = irxevent - button = ARROW_RIGHT - repeat = 5 - config = Key Right CurrentWindow -end -begin - prog = irxevent - button = END - config = Key End CurrentWindow -end -begin - prog = irxevent - button = ARROW_DOWN - repeat = 5 - config = Key Down CurrentWindow -end -begin - prog = irxevent - button = PG_DN - repeat = 5 - config = Key Page_Down CurrentWindow -end -begin - prog = irxevent - button = TAB - config = Key Tab CurrentWindow -end -begin - prog = irxevent - remote = * - button = sTAB - config = Key shift-Tab CurrentWindow -end -begin - prog = irxevent - button = SPACE - config = Key space CurrentWindow -end -begin - prog = irxevent - button = ESC - config = Key Escape CurrentWindow -end -begin - prog = irxevent - button = ALT - config = Key UP CurrentWindow -end -begin - prog = irxevent - button = 1 - config = Key 1 CurrentWindow -end -begin - prog = irxevent - button = 2 - config = Key 2 CurrentWindow -end -begin - prog = irxevent - button = 3 - config = Key 3 CurrentWindow -end -begin - prog = irxevent - remote = * - button = 4 - config = Key 4 CurrentWindow -end -begin - prog = irxevent - button = 5 - config = Key 5 CurrentWindow -end -begin - prog = irxevent - button = 6 - config = Key 6 CurrentWindow -end -begin - prog = irxevent - button = 7 - config = Key 7 CurrentWindow -end -begin - prog = irxevent - button = 8 - config = Key 8 CurrentWindow -end -begin - prog = irxevent - button = 9 - config = Key 9 CurrentWindow -end -begin - prog = irxevent - button = 0 - config = Key 0 CurrentWindow -end diff --git a/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg b/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg deleted file mode 100644 index d2ccdd1..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/pcmak/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv b/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv deleted file mode 100644 index 4783e06..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pinnacle_systems/lircd.conf.pctv +++ /dev/null @@ -1,94 +0,0 @@ -# -# contributed by Bart Alewijnse -# -# brand: Pinnacle Systems -# model: PCTV Remote (Perhaps other ones as well) -# supported devices: there's only one I know of. (serial) -# -# Mail me if your remote is only partly supported, or if it has different -# buttons than listed below. -# - -begin remote - - name PinnacleSysPCTVRemote - bits 8 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - gap 180000 - - begin codes - Mute 0x000000000000003C - Power 0x000000000000002F - Chan+Play 0x000000000000003F - Chan-Stop 0x000000000000003E - Vol+FF 0x000000000000003B - Vol-Rew 0x000000000000003D - 1 0x0000000000000031 - 2 0x0000000000000032 - 3 0x0000000000000033 - 4 0x0000000000000034 - 5 0x0000000000000035 - 6 0x0000000000000036 - 7 0x0000000000000037 - 8 0x0000000000000038 - 9 0x0000000000000039 - Fullscreen 0x000000000000002D - 0/AV 0x000000000000003A - Info 0x000000000000002B - Preview 0x000000000000002E - Record 0x0000000000000027 - Chan_Last 0x0000000000000025 - F_TV 0x0000000000000026 - F_TELETEXT 0x0000000000000029 - F_RADIO 0x000000000000002A - -# -# here are some extra buttons a new version of the remote seems to have -# -# contributed by Robbert Monna -# -# brand: Pinnacle Systems -# model: PCTV Remote (newest version?) -# supported devices: dongle on serial port (from TV-Card) -# - L 0x000000000000001F - Zoom 0x000000000000001E - vol+ 0x000000000000001B - vol- 0x000000000000000F - channel+ 0x0000000000000017 - channel- 0x000000000000001C - middle 0x000000000000001A - Menu 0x000000000000001D - next 0x0000000000000019 - undo 0x0000000000000016 - pause 0x0000000000000015 - redo 0x0000000000000013 - Rewind 0x000000000000000E - Play 0x000000000000000D - Stop 0x000000000000000B - FForward 0x0000000000000007 - EPG 0x0000000000000018 - -# here are some more buttons that seem to be mapped differently from -# the ones above - -# contributed by InterCeptor ceptor_7@freemail.hu -# -# brand: Pinnacle Systems PCTV Pro Remote -# model no. of remote control: (I can't find any numbers on it) -# supported devices: serial -# - - 9 0x0000000000000082 - Zoom 0x00000000000000B2 - middle 0x0000000000000014 - - - end codes -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv deleted file mode 100644 index 064ee57..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv +++ /dev/null @@ -1,34 +0,0 @@ -# -# contributed by Nathan Hand -# -# brand: Pixelview -# model: -# supported devices: Pixelview PlayTV PRO -# - -begin remote - name Pixelview - bits 8 - - begin codes - TV/FM 0x00000000000000e7 - FULL_SCREEN 0x00000000000000bf - CH+ 0x0000000000000049 - CH- 0x00000000000000c1 - VOL- 0x000000000000006a - VOL+ 0x000000000000004a - MUTE 0x0000000000000047 - SOURCE 0x00000000000000e1 - 1 0x00000000000000e0 - 2 0x00000000000000c8 - 3 0x00000000000000e8 - 4 0x0000000000000060 - 5 0x0000000000000062 - 6 0x00000000000000c9 - 7 0x00000000000000c0 - 8 0x00000000000000c2 - 9 0x0000000000000061 - 0 0x0000000000000040 - end codes -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878 b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878 deleted file mode 100644 index f017a3b..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_bt878 +++ /dev/null @@ -1,54 +0,0 @@ -# -# contributed by Michal Kochanowicz -# based on file contributred by Nathan Hand -# -# brand: PixelView -# model: BT878+W/FM -# supported devices: PixelView BT878+W/FM -# - -begin remote - name PixelView - bits 8 -# repeat_bit 2 - repeat 9080 2189 - gap 108056 - repeat_bit 0 - - begin codes - POWER 0x00000000000000aa - TV/FM 0x00000000000000e7 - TELETEXT 0x000000000000003f - SCAN 0x0000000000000041 - +/- 0x0000000000000069 - EJECT 0x000000000000002a - STOP 0x000000000000008a - SOURCE 0x00000000000000e1 - STEREO 0x00000000000000df - ENTER 0x000000000000005f - SEEK_NEXT 0x0000000000000067 - SEEK_FWD 0x00000000000000c7 - CH_UP 0x0000000000000049 - VOL_UP 0x000000000000004a - RECALL 0x0000000000000048 - PAUSE 0x0000000000000068 - PLAY 0x00000000000000ca - CH_DOWN 0x00000000000000c1 - VOL_DOWN 0x000000000000006a - SEEK_PREV 0x000000000000000a - SEEK_BACK 0x0000000000000042 - ZOOM 0x00000000000000bf - MUTE 0x0000000000000047 - 1 0x00000000000000e0 - 2 0x00000000000000c8 - 3 0x00000000000000e8 - 4 0x0000000000000060 - 5 0x0000000000000062 - 6 0x00000000000000c9 - 7 0x00000000000000c0 - 8 0x00000000000000c2 - 9 0x0000000000000061 - 0 0x0000000000000040 - end codes -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro deleted file mode 100644 index 84e84a9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.playtv_pro +++ /dev/null @@ -1,159 +0,0 @@ -# -# brand: PixelView -# model: PlayTV Pro remote control -# -# supported devices: -# works both with home-brew and TV card receiver (use lirc-0.6.6 or better) -# - - -begin remote - - name pixelviewp - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 200 - - pre_data_bits 16 - pre_data 0x61d6 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - begin codes - - power 0x0000000000007887 - zoom 0x00000000000038C7 - scan 0x000000000000E01F - tv/fm 0x000000000000C03F - vol+ 0x000000000000F807 - vol- 0x000000000000E817 - chan+ 0x0000000000006897 - chan- 0x00000000000028D7 - mute 0x00000000000018E7 - source 0x00000000000000FF - loop 0x000000000000C837 - +100 0x00000000000008F7 - fn- 0x00000000000020DF - fn+ 0x00000000000030CF - reset 0x000000000000B04F - freeze 0x000000000000F00F - function 0x000000000000708F - 0 0x00000000000040BF - 1 0x000000000000807F - 2 0x000000000000D02F - 3 0x000000000000D827 - 4 0x000000000000A05F - 5 0x000000000000906F - 6 0x000000000000A857 - 7 0x000000000000609F - 8 0x00000000000050AF - 9 0x00000000000048B7 - - end codes - -end remote - - -# This config file was automatically generated -# using lirc-0.7.2(pixelview_pro) on Mon Dec 5 03:17:25 2005 -# -# contributed by Thadeu A. Coelho de Paula -# thadeudepaula (at) gmail (dot) com -# http://mundolivre.hostrix.com.br -# -# brand: PixelView -# model: PlayTV MPEG2 (M4900) -# -# supported devices: -# This TV Card - - -begin remote - - name PixelView_PlayTV_MPEG2 - bits 16 - eps 30 - aeps 100 - - pre_data_bits 16 - pre_data 0x61D6 - - header 9000 4500 - one 563 1687 - zero 563 562 - ptrail 563 - repeat 9000 2250 - gap 108000 - toggle_bit 0 - - frequency 38000 - duty_cycle 33 - - - - begin codes - timeshift 0xC03F - power 0x7887 - 1 0x807F - 2 0xD02F - 3 0xD827 - 4 0xA05F - 5 0x906F - 6 0xA857 - 7 0x609F - 8 0x50AF - 9 0x48B7 - 0 0x40BF - loop 0xC837 - +100 0x08F7 - source 0x00FF - mute 0x18E7 - ch+ 0x6897 - ch- 0x28D7 - vol+ 0xF807 - vol- 0xE817 - zoom 0x38C7 - snapshot 0x9867 - scan 0x58A7 - bw 0x20DF - rec 0x708F - fw 0x30CF - stop 0xB847 - play 0x10EF - pause 0xF00F - tv 0xB04F - fm 0xE01F - end codes - -end remote - -# CONTROL LAYOUT: -# -# TIMESHIFT POWER -# -# 1 2 3 -# 4 5 6 -# 7 8 9 -# LOOP 0 SCAN -# SOURCE MUTE -# -# CH+ -# VOL- ZOOM VOL+ -# CH- -# -# SNAPSHOT SCAN -# -# BW REC FW -# STOP PLAY PAUSE -# -# TV FM diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster b/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster deleted file mode 100644 index 1b75e42..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircd.conf.remotemaster +++ /dev/null @@ -1,117 +0,0 @@ -# this config file was MANUALLY generated -# using lirc-0.6.0pre3 on Thu Feb 3 11:53:38 2000 -# -# contributed by Petre Rodan -# -# brand: PixelView -# model: RemoteMaster 2000 -# supported devices: ComboTV series -# receiver type: /dev/ttySx -# video card: PixelView bttv848 pll=1 type=5 -# - -begin remote - - name RemoteMaster_2000_12b - bits 20 - flags SPACE_ENC - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 10 - pre_data 0x12B - gap 189264 - - begin codes - 1 0x0000000000052D2F - 2 0x0000000000052CCF - 3 0x0000000000052CAF - 4 0x0000000000052D37 - 5 0x0000000000052CDF - 6 0x000000000005359F - 7 0x0000000000052D4F - 8 0x0000000000052D3F - 9 0x00000000000534DF - 0 0x0000000000052D57 - ENTER 0x0000000000052CD7 - +10 0x0000000000053537 - POWER 0x0000000000054D5F - MODE 0x00000000000534AF - TAB 0x0000000000053557 - ZOOM 0x000000000005355F - FREEZE 0x000000000005356F - SEEK-- 0x0000000000054DAF - PAUSE 0x0000000000052CB7 - SEEK++ 0x00000000000534B7 - SEEK- 0x0000000000052D5F - PLAY 0x0000000000052D9F - SEEK+ 0x00000000000534CF - STOP 0x0000000000054D9F - EJECT 0x0000000000054D6F - F1 0x000000000005354F - F2 0x00000000000534D7 - F3 0x00000000000534BF - F4 0x000000000005352F - CH- 0x000000000005353F - CH+ 0x00000000000535AF - VOL- 0x0000000000052D6F - VOL+ 0x0000000000052DAF - end codes - -end remote - -begin remote - - name RemoteMaster_2000_14b - bits 20 - flags SPACE_ENC - eps 30 - aeps 100 - - one 0 833 - zero 833 0 - pre_data_bits 10 - pre_data 0x14B - gap 189264 - - begin codes - 1 0x0000000000052D2F - 2 0x0000000000052CCF - 3 0x0000000000052CAF - 4 0x0000000000052D37 - 5 0x0000000000052CDF - 6 0x000000000005359F - 7 0x0000000000052D4F - 8 0x0000000000052D3F - 9 0x00000000000534DF - 0 0x0000000000052D57 - ENTER 0x0000000000052CD7 - +10 0x0000000000053537 - POWER 0x0000000000054D5F - MODE 0x00000000000534AF - TAB 0x0000000000053557 - ZOOM 0x000000000005355F - FREEZE 0x000000000005356F - SEEK-- 0x0000000000054DAF - PAUSE 0x0000000000052CB7 - SEEK++ 0x00000000000534B7 - SEEK- 0x0000000000052D5F - PLAY 0x0000000000052D9F - SEEK+ 0x00000000000534CF - STOP 0x0000000000054D9F - EJECT 0x0000000000054D6F - F1 0x000000000005354F - F2 0x00000000000534D7 - F3 0x00000000000534BF - F4 0x000000000005352F - CH- 0x000000000005353F - CH+ 0x00000000000535AF - VOL- 0x0000000000052D6F - VOL+ 0x0000000000052DAF - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro deleted file mode 100644 index e277fe6..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.playtv_pro +++ /dev/null @@ -1,29 +0,0 @@ -# lircmd.conf file to be used with PixeView PlayTV pro -# -# lircmd config file -# - -#PROTOCOL IntelliMouse - -ACCELERATOR 2 20 5 - -ACTIVATE * +100 - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_S * 8 - -BUTTON1_TOGGLE * tv/fm -BUTTON2_TOGGLE * scan -BUTTON3_TOGGLE * zoom - -BUTTON1_CLICK * 0 -BUTTON2_CLICK * loop -BUTTON3_CLICK * source - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster b/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster deleted file mode 100644 index 07d2547..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircmd.conf.remotemaster +++ /dev/null @@ -1,31 +0,0 @@ -# lircmd.conf file to be used with RemoteMaster 2000 -# -# lircmd config file -# - -# ACCELERATOR start max multiplier - -#PROTOCOL IntelliMouse - -ACCELERATOR 2 20 5 - -ACTIVATE * ENTER - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 -MOVE_S * 8 - -BUTTON1_TOGGLE * +10 -BUTTON2_TOGGLE * FREEZE -#BUTTON3_TOGGLE * LIST - -BUTTON1_CLICK * 5 -BUTTON2_CLICK * 0 -#BUTTON3_CLICK * POWER - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro b/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro deleted file mode 100644 index 4e495c8..0000000 --- a/abs/core-testing/live-installer/templates/remotes/pixelview/lircrc.playtv_pro +++ /dev/null @@ -1,134 +0,0 @@ -# -# This is an example of ~/.lircrc file -# It is a copy of actual setup from my home machine. -# Contributed by Artur Lipowski -# - begin - prog = irexec - button = power - config = xawtv-remote quit - flags = mode - end - begin - prog = irexec - button = source - repeat = 1 - config = xawtv-remote setinput next - end - begin - prog = irexec - button = zoom - repeat = 1 - config = xawtv-remote fullscreen - end - begin - prog = irexec - button = chan- - repeat = 1 - config = xawtv-remote setstation prev - end - begin - prog = irexec - button = chan+ - repeat = 1 - config = xawtv-remote setstation next - end - begin - prog = irxevent - button = loop - repeat = 1 - config = Key c xawtv - end - begin - prog = irxevent - button = scan - repeat = 1 - config = Key ctrl-z xawtv - end - begin - prog = irxevent - button = mute - config = Key a xawtv - end - begin - prog = irxevent - button = vol+ - repeat = 1 - config = Key KP_Add xawtv - end - begin - prog = irxevent - button = vol- - repeat = 1 - config = Key KP_Subtract xawtv - end - begin - prog = irexec - button = 1 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = 2 - config = xawtv-remote setstation 1 - end - begin - prog = irexec - button = 3 - config = xawtv-remote setstation 2 - end - begin - prog = irexec - button = 4 - config = xawtv-remote setstation 3 - end - begin - prog = irexec - button = 5 - config = xawtv-remote setstation 4 - end - begin - prog = irexec - button = 6 - config = xawtv-remote setstation 5 - end - begin - prog = irexec - button = 7 - config = xawtv-remote setstation 6 - end - begin - prog = irexec - button = 8 - config = xawtv-remote setstation 7 - end - begin - prog = irexec - button = 9 - config = xawtv-remote setstation 8 - end - begin - prog = irexec - button = 0 - config = xawtv-remote setstation 0 - end - begin - prog = irexec - button = function - config = xawtv-remote attr next - end - begin - prog = irexec - button = fn+ - config = xawtv-remote attr inc - end - begin - prog = irexec - button = fn- - config = xawtv-remote attr dec - end - begin - prog = irexec - button = +100 - config = xawtv-remote msg " `date +%H:%M` " - end diff --git a/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951 b/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951 deleted file mode 100644 index e488424..0000000 --- a/abs/core-testing/live-installer/templates/remotes/provideo/lircd.conf.pv951 +++ /dev/null @@ -1,67 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.1 on Wed May 24 23:10:08 2000 -# -# contributed by BartOwl -# -# brand: 3DeMON (from J.Sir Computer inc.) http://www.jsir.com/ -# model: PV951 (http://www.jsir.com/pv951.htm) -# supported devices: Remote control for this TV-capture card -# -# The manufacturer seems to be ProVideo: http://www.provideo.com.tw -# Funny: they have Linux "drivers" for this card... -# - -begin remote - - name PV951 - bits 16 - flags SPACE_ENC|CONST_LENGTH - eps 30 - aeps 100 - - header 9067 4482 - one 597 1650 - zero 597 529 - ptrail 584 - repeat 9068 2232 - pre_data_bits 16 - pre_data 0x61D6 - gap 107983 - repeat_bit 0 - - begin codes - power 0x00000000000048B7 - air/cbl 0x000000000000D02F - pc/tv 0x0000000000008877 - source 0x000000000000F00F - mts 0x000000000000C837 - mute 0x00000000000008F7 - 1 0x000000000000807F - 2 0x00000000000040BF - 3 0x000000000000C03F - 4 0x00000000000020DF - 5 0x000000000000A05F - 6 0x000000000000609F - 7 0x000000000000E01F - 8 0x00000000000010EF - 9 0x000000000000906F - 0 0x00000000000000FF - +100 0x00000000000050AF - ch_rtn 0x000000000000E817 - ch+ 0x00000000000058A7 - ch- 0x0000000000007887 - vol+ 0x000000000000D827 - vol- 0x000000000000F807 - func 0x0000000000009867 - ttx 0x000000000000B04F - pg+ 0x000000000000708F - pg- 0x000000000000B847 - cc 0x0000000000006897 - sync 0x00000000000028D7 - ch+- 0x00000000000018E7 - autoscan 0x00000000000030CF - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/receiver_usb.id b/abs/core-testing/live-installer/templates/remotes/receiver_usb.id deleted file mode 100644 index a830b11..0000000 --- a/abs/core-testing/live-installer/templates/remotes/receiver_usb.id +++ /dev/null @@ -1,33 +0,0 @@ -0bc7:0005|snapstream_firefly| "X10 Wireless Technology, Inc." -0bc7:0008|SnapStream_Firefly| "SnapStream Firefly" -10c4:0003|CommandIR_Tranceiver| " CommandIR Transceiver" -0bc7:0004|ATI_Remote_Wonder| " ATI Remote Wonder" -0e9c:0000|streamzap| "Streamzap Remote" -0fe9:9010|Dvico| "DVICO Remote:" -6253:0100|Twinhan_USB| "the VisionPlus is a Twinhan clone " -1509:9242|MCEUSB-new| "FIC eHome Infrared Transceiver 1509/9242" -1934:0602|MCEUSB-new| "Fintek eHome Infrared Transceiver 1934/0602" -147a:e015|MCEUSB-new| "Formosa eHome Infrared Transceiver 147a/e015" -147a:e017|MCEUSB-new| "Formosa aim / Trust MCE Infrared Receiver147a/e017" -147a:e018|MCEUSB-new| "Formosa Industrial Computing 147a/e018" -107b:3009|MCEUSB-new| "Gateway eHome Infrared Transceiver 107b/3009" -195d:7002|MCEUSB-new| "Itron ione Libra Q-11 195d/7002" -043e:9803|MCEUSB-new| "LG eHome Infrared Transceiver 043e/9803" -045e:00a0|MCEUSB-new| "Microsoft MCE Infrared Transceiver 045e/00a0" -03ee:2501|MCEUSB-new| "Mitsumi 03ee/2501" -0471:060c|MCEUSB-new| "Philips Infrared Transciever - HP branded 0471/060C" -0471:060d|MCEUSB-new| "Philips SRM5100 0471/060d" -0471:0815|MCEUSB-new| "Philips eHome Infrared Transciever 0471/0815" -2304:0225|MCEUSB-new| "Pinnacle Systems, Inc. 2304/0225" -179d:0010|MCEUSB-new| "Ricavision internal Infrared Transceiver 179d/0010" -1308:c001|MCEUSB-new| "Shuttle eHome Infrared Transceiver 1308/c001" -051c:c001|MCEUSB-new| "Shuttle2 eHome Infrared Transceiver 051c/c001" -0609:031d|MCEUSB-new| "SMK/Toshiba G83C0004D410 0609/031d" -0609:0322|MCEUSB-new| "SMK eHome Infrared Transceiver (Sony VAIO)0609/0322" -0609:0334|MCEUSB-new| "SKM bundled with Hauppauge PVR-150 0609/0334" -1460:9150|MCEUSB-new| "Tatung eHome Infrared Transceiver 1460/9150" -1784:0001|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0001" -1784:0006|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0006" -1784:0007|MCEUSB-new| "Topseed HP eHome Infrared Transceiver 1784/0007" -1784:0008|MCEUSB-new| "Topseed eHome Infrared Transceiver 1784/0008" -045e:006d|MCEUSB-old| "USB Microsoft IR Transceiver Driver 045e/006d" diff --git a/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130 b/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130 deleted file mode 100644 index 1797647..0000000 --- a/abs/core-testing/live-installer/templates/remotes/remotec/lircd.conf.BW6130 +++ /dev/null @@ -1,88 +0,0 @@ -# -# brand: Remotec -# model no. of remote control: BW 6130 Multimedia Master Receiver -# devices being controlled by this remote: -# - -begin remote - - name MEDIAMASTER - bits 32 - eps 0 - aeps 0 - - one 0 0 - zero 0 0 - pre_data_bits 32 - pre_data 0xFFA10003 - gap 131980 - post_data_bits 0 - toggle_bit 0 - - begin codes - PRE 0x23 - NEXT 0x24 - 1 0X10 - 2 0x11 - 3 0x12 - POWER 0x50 - VOL+ 0x30 - VOL- 0x31 - L 0x42 - R 0x44 - PAUSE 0x22 - PLAY 0x20 - STOP 0x21 - MUTE 0x32 - MOUSE_SLOW_N 0x95 - MOUSE_SLOW_NNE 0xd1 - MOUSE_SLOW_NE 0xcd - MOUSE_SLOW_ENE 0xc9 - MOUSE_SLOW_E 0xc5 - MOUSE_SLOW_ESE 0xe9 - MOUSE_SLOW_SE 0xed - MOUSE_SLOW_SSE 0xf1 - MOUSE_SLOW_S 0xb5 - MOUSE_SLOW_SSW 0xb1 - MOUSE_SLOW_SW 0xad - MOUSE_SLOW_WSW 0xa9 - MOUSE_SLOW_W 0x85 - MOUSE_SLOW_WNW 0x89 - MOUSE_SLOW_NW 0x8d - MOUSE_SLOW_NNW 0x91 - MOUSE_MEDIUM_N 0x96 - MOUSE_MEDIUM_NNE 0xd2 - MOUSE_MEDIUM_NE 0xce - MOUSE_MEDIUM_ENE 0xca - MOUSE_MEDIUM_E 0xc6 - MOUSE_MEDIUM_ESE 0xea - MOUSE_MEDIUM_SE 0xee - MOUSE_MEDIUM_SSE 0xf2 - MOUSE_MEDIUM_S 0xb6 - MOUSE_MEDIUM_SSW 0xb2 - MOUSE_MEDIUM_SW 0xae - MOUSE_MEDIUM_WSW 0xaa - MOUSE_MEDIUM_W 0x86 - MOUSE_MEDIUM_WNW 0x8a - MOUSE_MEDIUM_NW 0x8e - MOUSE_MEDIUM_NNW 0x92 - MOUSE_FAST_N 0x97 - MOUSE_FAST_NNE 0xd3 - MOUSE_FAST_NE 0xcf - MOUSE_FAST_ENE 0xcb - MOUSE_FAST_E 0xc7 - MOUSE_FAST_ESE 0xeb - MOUSE_FAST_SE 0xef - MOUSE_FAST_SSE 0xf3 - MOUSE_FAST_S 0xb7 - MOUSE_FAST_SSW 0xb3 - MOUSE_FAST_SW 0xaf - MOUSE_FAST_WSW 0xab - MOUSE_FAST_W 0x87 - MOUSE_FAST_WNW 0x8b - MOUSE_FAST_NW 0x8f - MOUSE_FAST_NNW 0x93 - end codes - -end remote - diff --git a/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130 b/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130 deleted file mode 100644 index f056530..0000000 --- a/abs/core-testing/live-installer/templates/remotes/remotec/lircmd.conf.BW6130 +++ /dev/null @@ -1,291 +0,0 @@ -# -# lircmd config file -# simply copied/edited x10/mouseremote lircmd file -# - -PROTOCOL IntelliMouse -#PROTOCOL MouseSystems - -# ACCELERATOR start max multiplier - -TOGGLE_ACTIVATE MEDIAMASTER 3 - -ACCELERATOR 1 3 2 - - -MOVE_N MEDIAMASTER MOUSE_SLOW_N -MOVE_N MEDIAMASTER MOUSE_SLOW_N - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N -MOVE_N MEDIAMASTER MOUSE_MEDIUM_N - -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N -MOVE_N MEDIAMASTER MOUSE_FAST_N - -MOVE_N MEDIAMASTER MOUSE_SLOW_NNE -MOVE_NE MEDIAMASTER MOUSE_SLOW_NNE - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NNE - -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE -MOVE_N MEDIAMASTER MOUSE_FAST_NNE -MOVE_NE MEDIAMASTER MOUSE_FAST_NNE - -MOVE_NE MEDIAMASTER MOUSE_SLOW_NE -MOVE_NE MEDIAMASTER MOUSE_SLOW_NE - -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_NE - -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE -MOVE_NE MEDIAMASTER MOUSE_FAST_NE - -MOVE_E MEDIAMASTER MOUSE_SLOW_ENE -MOVE_NE MEDIAMASTER MOUSE_SLOW_ENE - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ENE -MOVE_NE MEDIAMASTER MOUSE_MEDIUM_ENE - -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE -MOVE_E MEDIAMASTER MOUSE_FAST_ENE -MOVE_NE MEDIAMASTER MOUSE_FAST_ENE - -MOVE_E MEDIAMASTER MOUSE_SLOW_E -MOVE_E MEDIAMASTER MOUSE_SLOW_E - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E -MOVE_E MEDIAMASTER MOUSE_MEDIUM_E - -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E -MOVE_E MEDIAMASTER MOUSE_FAST_E - -MOVE_E MEDIAMASTER MOUSE_SLOW_ESE -MOVE_SE MEDIAMASTER MOUSE_SLOW_ESE - -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_E MEDIAMASTER MOUSE_MEDIUM_ESE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_ESE - -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE -MOVE_E MEDIAMASTER MOUSE_FAST_ESE -MOVE_SE MEDIAMASTER MOUSE_FAST_ESE - -MOVE_SE MEDIAMASTER MOUSE_SLOW_SE -MOVE_SE MEDIAMASTER MOUSE_SLOW_SE - -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SE - -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE -MOVE_SE MEDIAMASTER MOUSE_FAST_SE - -MOVE_S MEDIAMASTER MOUSE_SLOW_SSE -MOVE_SE MEDIAMASTER MOUSE_SLOW_SSE - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSE -MOVE_SE MEDIAMASTER MOUSE_MEDIUM_SSE - -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE -MOVE_S MEDIAMASTER MOUSE_FAST_SSE -MOVE_SE MEDIAMASTER MOUSE_FAST_SSE - -MOVE_S MEDIAMASTER MOUSE_SLOW_S -MOVE_S MEDIAMASTER MOUSE_SLOW_S - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S -MOVE_S MEDIAMASTER MOUSE_MEDIUM_S - -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S -MOVE_S MEDIAMASTER MOUSE_FAST_S - -MOVE_S MEDIAMASTER MOUSE_SLOW_SSW -MOVE_SW MEDIAMASTER MOUSE_SLOW_SSW - -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_S MEDIAMASTER MOUSE_MEDIUM_SSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SSW - -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW -MOVE_S MEDIAMASTER MOUSE_FAST_SSW -MOVE_SW MEDIAMASTER MOUSE_FAST_SSW - -MOVE_SW MEDIAMASTER MOUSE_SLOW_SW -MOVE_SW MEDIAMASTER MOUSE_SLOW_SW - -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_SW - -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW -MOVE_SW MEDIAMASTER MOUSE_FAST_SW - -MOVE_W MEDIAMASTER MOUSE_SLOW_WSW -MOVE_SW MEDIAMASTER MOUSE_SLOW_WSW - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WSW -MOVE_SW MEDIAMASTER MOUSE_MEDIUM_WSW - -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW -MOVE_W MEDIAMASTER MOUSE_FAST_WSW -MOVE_SW MEDIAMASTER MOUSE_FAST_WSW - -MOVE_W MEDIAMASTER MOUSE_SLOW_W -MOVE_W MEDIAMASTER MOUSE_SLOW_W - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W -MOVE_W MEDIAMASTER MOUSE_MEDIUM_W - -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W -MOVE_W MEDIAMASTER MOUSE_FAST_W - -MOVE_W MEDIAMASTER MOUSE_SLOW_WNW -MOVE_NW MEDIAMASTER MOUSE_SLOW_WNW - -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_W MEDIAMASTER MOUSE_MEDIUM_WNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_WNW - -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW -MOVE_W MEDIAMASTER MOUSE_FAST_WNW -MOVE_NW MEDIAMASTER MOUSE_FAST_WNW - -MOVE_NW MEDIAMASTER MOUSE_SLOW_NW -MOVE_NW MEDIAMASTER MOUSE_SLOW_NW - -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NW - -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW -MOVE_NW MEDIAMASTER MOUSE_FAST_NW - -MOVE_N MEDIAMASTER MOUSE_SLOW_NNW -MOVE_NW MEDIAMASTER MOUSE_SLOW_NNW - -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_N MEDIAMASTER MOUSE_MEDIUM_NNW -MOVE_NW MEDIAMASTER MOUSE_MEDIUM_NNW - -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW -MOVE_N MEDIAMASTER MOUSE_FAST_NNW -MOVE_NW MEDIAMASTER MOUSE_FAST_NNW - -BUTTON1_CLICK MEDIAMASTER L -BUTTON3_CLICK MEDIAMASTER R - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem b/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem deleted file mode 100644 index da0fb82..0000000 --- a/abs/core-testing/live-installer/templates/remotes/sasem/lircd.conf.sasem +++ /dev/null @@ -1,81 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.0pre4(sasem) on Mon May 24 03:11:34 2004 -# -# contributed by Oliver Stabel (oliver.stabel@gmx.de) -# -# brand: Sasem OnAir -# model no. of remote control: n/a -# devices being controlled by this remote: -# This IR came with the Dign HV5 HTPC case, manufactured -# by Uneed in Korea (www.iuneed.com). -# AFAIK the case is called Ahanix HV5 in the US. -# The IR/VFD device is originally manufactured by Sasem, -# and sold as OnAir Remocon-V (?looks different from -# mine but should be the same?) -# - -begin remote - - name lirc_sasem - bits 16 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0x0C807F - post_data_bits 24 - post_data 0x000000 - gap 196000 - toggle_bit 0 - - - begin codes - 1 0x08F7 - 2 0x09F6 - 3 0x0AF5 - 4 0x10EF - 5 0x11EE - 6 0x12ED - 7 0x18E7 - 8 0x19E6 - 9 0x1AE5 - start 0x40BF - 0 0x41BE - full_down 0x06F9 - vol- 0x0FF0 - vol+ 0x0EF1 - esc 0x05FA - up 0x0BF4 - close 0x07F8 - left 0x03FC - enter 0x13EC - right 0x1BE4 - prev 0x0CF3 - down 0x43BC - next 0x01FE - mute 0x0DF2 - step 0x04FB - play_pause 0x49B6 - stop 0x48B7 - winamp 0x1EE1 - media_player 0x15EA - hdtv 0x17E8 - cd_player 0x16E9 - win_dvd 0x44BB - power_dvd 0x14EB - internet 0x46B9 - email 0x47B8 - a 0x45BA - b 0x1DE2 - c 0x1CE3 - d 0x1FE0 - eject 0x02FD - power 0x00FF - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic b/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic deleted file mode 100644 index 8aa4ef5..0000000 --- a/abs/core-testing/live-installer/templates/remotes/sigma_designs/lircd.conf.realmagic +++ /dev/null @@ -1,83 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 -# -# contributed by Stefan Neuwirth & Andreas Lange -# -# brand: Sigma Designs -# model: REALmagic remote control -# www.realmagic.com/support.htm#remote -# supported devices: -# "For Hollywood Plus Version 1.4 or above Driver only" -# remote control for the Sigma Designs REALmagic Hollywood Plus DVD card -# receiver is connected to the serial port - it does not require the card -# -# The first byte always is 131. The second and third byte are equal. (CB) -# - -begin remote - - name REALmagic - bits 20 - eps 30 - aeps 100 - - one 0 0 - zero 0 0 - pre_data_bits 10 - pre_data 0x183 - gap 189974 - toggle_bit 0 - - - begin codes - 1 0x0000000000062D8B - 2 0x0000000000012C4B - 3 0x000000000001AC6B - 4 0x0000000000072DCB - 5 0x000000000000AC2B - 6 0x0000000000052D4B - -# Nicolas Vignal reported that this code is sent for his remote -# version (1.5). It should be no problem to just have two entries for -# "6" unless you want to send codes what won't work for this receiver -# anyway. - - 6 0x0000000000041505 - - 7 0x0000000000058561 - 8 0x0000000000044511 - 9 0x000000000004AD2B - 0 0x000000000004C531 - VOL+ 0x0000000000022C8B - VOL- 0x0000000000032CCB - MUTE 0x000000000006ADAB - L-R 0x0000000000052549 - VGA 0x0000000000054551 - ENTER 0x0000000000042509 - QUIT 0x0000000000058D63 - PRG 0x0000000000038CE3 - UP 0x0000000000078DE3 - DOWN 0x0000000000064D93 - LEFT 0x0000000000044D13 - RIGHT 0x000000000003ECFB - SELECT 0x0000000000024C93 - MENU 0x0000000000014C53 - TITLE 0x0000000000054D53 - OSD 0x0000000000034CD3 - LANG 0x0000000000074DD3 - ANGLE 0x000000000000CC33 - SUB 0x000000000004CD33 - PAUSE 0x000000000002CCB3 - STOP 0x000000000006CDB3 - PLAY 0x000000000001CC73 - EJECT 0x000000000005CD73 - REV 0x000000000003CCF3 - FF 0x000000000007CDF3 - PREV 0x0000000000002C0B - NEXT 0x0000000000042D0B - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek b/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek deleted file mode 100644 index 090afb9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/silitek/lircd.conf.silitek +++ /dev/null @@ -1,97 +0,0 @@ -# -# -# contributed by Krister Wicksell -# -# brand: Silitek -# model: SM-1000 -# supported devices: -# - -begin remote - - name SILITEK_SM-1000 - bits 24 - repeat_bit 0 - - begin codes - MOUSE_E 0x0000000000aa0001 - MOUSE_NEE 0x0000000000aa0102 - MOUSE_NE 0x0000000000aa0103 - MOUSE_NNE 0x0000000000aa0104 - MOUSE_N 0x0000000000aa0105 - MOUSE_NNW 0x0000000000aa1104 - MOUSE_NW 0x0000000000aa1103 - MOUSE_NWW 0x0000000000aa1102 - MOUSE_W 0x0000000000aa1001 - MOUSE_SWW 0x0000000000aa1002 - MOUSE_SW 0x0000000000aa1003 - MOUSE_SSW 0x0000000000aa1004 - MOUSE_S 0x0000000000aa0005 - MOUSE_SSE 0x0000000000aa0004 - MOUSE_SE 0x0000000000aa0003 - MOUSE_SEE 0x0000000000aa0002 - MOUSE_R_BUTTON 0x0000000000aaa0bb - MOUSE_L_BUTTON 0x0000000000aa0abb - MOUSE_L+R_BUTTON 0x0000000000aaaabb - - 0 0x0000000000bb4a75 - 1 0x0000000000bbc1fe - 2 0x0000000000bbc2fd - 3 0x0000000000bb437c - 4 0x0000000000bbc4fb - 5 0x0000000000bb457a - 6 0x0000000000bb4679 - 7 0x0000000000bbc7f8 - 8 0x0000000000bbc8f7 - 9 0x0000000000bb4976 - * 0x0000000000bbcbf4 - # 0x0000000000bb4c73 - REW 0x0000000000bb516e - FWD 0x0000000000bbd0ef - PAUSE 0x0000000000bbcef1 - PLAY 0x0000000000bbcdf2 - STOP 0x0000000000bb4f70 - VOLUME_UP 0x0000000000bbd3ec - VOLUME_DOWN 0x0000000000bb546b - MUTE 0x0000000000bb526d - DISPLAY 0x0000000000bbd5ea - CD 0x0000000000bbdae5 - SHOW_WIZ 0x0000000000bb5b64 - PG_UP 0x0000000000bbd6e9 - PG_DN 0x0000000000bb5768 - BACK 0x0000000000bb5867 - FORWARD 0x0000000000bbd9e6 - WWW 0x0000000000bbdce3 - CLOSE 0x0000000000bb5d62 - - 0_UP 0x0000000000cc4a75 - 1_UP 0x0000000000ccc1fe - 2_UP 0x0000000000ccc2fd - 3_UP 0x0000000000cc437c - 4_UP 0x0000000000ccc4fb - 5_UP 0x0000000000cc457a - 6_UP 0x0000000000cc4679 - 7_UP 0x0000000000ccc7f8 - 8_UP 0x0000000000ccc8f7 - 9_UP 0x0000000000cc4976 - *_UP 0x0000000000cccbf4 - #_UP 0x0000000000cc4c73 - REW_UP 0x0000000000cc516e - FWD_UP 0x0000000000ccd0ef - PAUSE_UP 0x0000000000cccef1 - PLAY_UP 0x0000000000cccdf2 - STOP_UP 0x0000000000cc4f70 - VOLUME_UP_UP 0x0000000000ccd3ec - VOLUME_DOWN_UP 0x0000000000cc546b - MUTE_UP 0x0000000000cc526d - DISPLAY_UP 0x0000000000ccd5ea - CD_UP 0x0000000000ccdae5 - SHOW_WIZ_UP 0x0000000000cc5b64 - PG_UP_UP 0x0000000000ccd6e9 - PG_DN_UP 0x0000000000cc5768 - BACK_UP 0x0000000000cc5867 - FORWARD_UP 0x0000000000ccd9e6 - WWW_UP 0x0000000000ccdce3 - CLOSE_UP 0x0000000000cc5d62 - end codes -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek b/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek deleted file mode 100644 index fc93f79..0000000 --- a/abs/core-testing/live-installer/templates/remotes/silitek/lircmd.conf.silitek +++ /dev/null @@ -1,72 +0,0 @@ -# -# lircmd config file for the Silitek control -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 4 2 - -#TOGGLE_ACTIVATE SILITEK_SM-1000 SHOW_WIZ - -MOVE_N SILITEK_SM-1000 MOUSE_N -MOVE_N SILITEK_SM-1000 MOUSE_N - -MOVE_N SILITEK_SM-1000 MOUSE_NNE -MOVE_NE SILITEK_SM-1000 MOUSE_NNE - -MOVE_NE SILITEK_SM-1000 MOUSE_NE -MOVE_NE SILITEK_SM-1000 MOUSE_NE - -MOVE_E SILITEK_SM-1000 MOUSE_NEE -MOVE_NE SILITEK_SM-1000 MOUSE_NEE - -MOVE_E SILITEK_SM-1000 MOUSE_E -MOVE_E SILITEK_SM-1000 MOUSE_E - -MOVE_E SILITEK_SM-1000 MOUSE_SEE -MOVE_SE SILITEK_SM-1000 MOUSE_SEE - -MOVE_SE SILITEK_SM-1000 MOUSE_SE -MOVE_SE SILITEK_SM-1000 MOUSE_SE - -MOVE_S SILITEK_SM-1000 MOUSE_SSE -MOVE_SE SILITEK_SM-1000 MOUSE_SSE - -MOVE_S SILITEK_SM-1000 MOUSE_S -MOVE_S SILITEK_SM-1000 MOUSE_S - -MOVE_S SILITEK_SM-1000 MOUSE_SSW -MOVE_SW SILITEK_SM-1000 MOUSE_SSW - -MOVE_SW SILITEK_SM-1000 MOUSE_SW -MOVE_SW SILITEK_SM-1000 MOUSE_SW - -MOVE_W SILITEK_SM-1000 MOUSE_SWW -MOVE_SW SILITEK_SM-1000 MOUSE_SWW - -MOVE_W SILITEK_SM-1000 MOUSE_W -MOVE_W SILITEK_SM-1000 MOUSE_W - -MOVE_W SILITEK_SM-1000 MOUSE_NWW -MOVE_NW SILITEK_SM-1000 MOUSE_NWW - -MOVE_NW SILITEK_SM-1000 MOUSE_NW -MOVE_NW SILITEK_SM-1000 MOUSE_NW - -MOVE_N SILITEK_SM-1000 MOUSE_NNW -MOVE_NW SILITEK_SM-1000 MOUSE_NNW - -MOVE_IN SILITEK_SM-1000 PG_UP -MOVE_OUT SILITEK_SM-1000 PG_DN - -BUTTON1_TOGGLE SILITEK_SM-1000 DISPLAY -#BUTTON2_TOGGLE SILITEK_SM-1000 5 -#BUTTON3_TOGGLE SILITEK_SM-1000 6 - -BUTTON1_CLICK SILITEK_SM-1000 MOUSE_L_BUTTON -BUTTON2_CLICK SILITEK_SM-1000 MOUSE_R_BUTTON -BUTTON3_CLICK SILITEK_SM-1000 MOUSE_L+R_BUTTON - -# BUTTONx_CLICK, BUTTONx_UP, BUTTONx_DOWN are also possible diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf deleted file mode 100644 index 288bb51..0000000 --- a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircd.snapstrm.conf +++ /dev/null @@ -1,127 +0,0 @@ -# Please make this file available to others -# by sending it to -# -# this config file was automatically generated -# using lirc-0.7.0(any) on Fri Mar 11 08:51:45 2005 -# -# contributed by -# -# brand: Snapstream Firefly Remote -# model no. of remote control: -# devices being controlled by this remote: -# - -begin remote - -name Snapstream_Firefly -bits 40 -eps 30 -aeps 100 - -one 0 0 -zero 0 0 -gap 219964 -toggle_bit 0 - - -begin codes -MAXI 0x0000001481AC0000 -MAXI 0x00000014012C0000 -CLOSE 0x00000014D7020000 -CLOSE 0x0000001457820000 -1 0x00000014628D0000 -1 0x00000014E20D0000 -2 0x00000014E30E0000 -2 0x00000014638E0000 -3 0x00000014648F0000 -3 0x00000014E40F0000 -4 0x00000014E5100000 -4 0x0000001465900000 -5 0x0000001466910000 -5 0x00000014E6110000 -6 0x00000014E7120000 -6 0x0000001467920000 -7 0x0000001468930000 -7 0x00000014E8130000 -8 0x00000014E9140000 -8 0x0000001469940000 -9 0x000000146A950000 -9 0x00000014EA150000 -0 0x00000014EC170000 -0 0x000000146C970000 -BACK 0x000000146B960000 -BACK 0x00000014EB160000 -ENT 0x00000014ED180000 -ENT 0x000000146D980000 -VOL+ 0x000000145E890000 -VOL+ 0x00000014DE090000 -VOL- 0x000000145D880000 -VOL- 0x00000014DD080000 -MUTE 0x000000145F8A0000 -MUTE 0x00000014DF0A0000 -FIREFLY 0x0000001455800000 -FIREFLY 0x00000014D5000000 -CH+ 0x00000014608B0000 -CH+ 0x00000014E00B0000 -CH- 0x00000014618C0000 -CH- 0x00000014E10C0000 -INFO 0x0000001483AE0000 -INFO 0x00000014032E0000 -OPTION 0x0000001484AF0000 -OPTION 0x00000014042F0000 -UP 0x000000146F9A0000 -UP 0x00000014EF1A0000 -LEFT 0x00000014729D0000 -LEFT 0x00000014F21D0000 -DOWN 0x0000001477A20000 -DOWN 0x00000014F7220000 -RIGHT 0x00000014749F0000 -RIGHT 0x00000014F41F0000 -OK 0x00000014739E0000 -OK 0x00000014F31E0000 -MENU 0x00000014719C0000 -MENU 0x00000014F11C0000 -EXIT 0x0000001475A00000 -EXIT 0x00000014F5200000 -REC 0x00000014FC270000 -REC 0x000000147CA70000 -PLAY 0x00000014FA250000 -PLAY 0x000000147AA50000 -STOP 0x00000014FD280000 -STOP 0x000000147DA80000 -REW 0x00000014F9240000 -REW 0x0000001479A40000 -FWD 0x00000014FB260000 -FWD 0x000000147BA60000 -PREV 0x00000014002B0000 -PREV 0x0000001480AB0000 -PAUSE 0x00000014FE290000 -PAUSE 0x000000147EA90000 -NEXT 0x00000014FF2A0000 -NEXT 0x000000147FAA0000 -MUSIC 0x00000014DB060000 -MUSIC 0x000000145B860000 -PHOTOS 0x00000014DA050000 -PHOTOS 0x000000145A850000 -DVD 0x00000014D9040000 -DVD 0x0000001459840000 -TV 0x00000014D8030000 -TV 0x0000001458830000 -VIDEO 0x00000014DC070000 -VIDEO 0x000000145C870000 -HELP 0x00000014D6010000 -HELP 0x0000001456810000 -MOUSE 0x00000014022D0000 -MOUSE 0x0000001482AD0000 -A 0x00000014EE190000 -A 0x000000146E990000 -B 0x00000014F01B0000 -B 0x00000014709B0000 -C 0x00000014F6210000 -C 0x0000001476A10000 -D 0x00000014F8230000 -D 0x0000001478A30000 - -end codes - -end remote \ No newline at end of file diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt deleted file mode 100644 index e918011..0000000 --- a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/lircrc-snapstrm.txt +++ /dev/null @@ -1,590 +0,0 @@ -# ~/.mythtv/lircrc -# -# MythTV native LIRC config file for -# the new grey Hauppauge remote -# -# Modified from Jarod Wilson's which came from Jeff Campbell's -# By Brad Templeton - - -# Here we have the jump point commands. They only work if you have -# defined function keys for these jump points. For me the most -# common command is the menu of recordings, so I put that on "videos" -# even though that's counter-intuitive - -begin -prog = mythtv -button = TV -repeat = 3 -config = F5 -end - -begin -prog = mythtv -button = Videos -repeat = 3 -config = F2 -end - -# Not yet defined -begin -prog = mythtv -button = Music -repeat = 3 -config = Up -end - -# Given another function for now, I don't use mythgallery -begin -prog = mythtv -button = Pictures -repeat = 3 -config = F -end - -begin -prog = mythtv -button = Guide -repeat = 3 -config = F3 -end - -# I stuck the "todo" list on here as Myth has no radio function -begin -prog = mythtv -button = Radio -repeat = 3 -config = F4 -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = LEFT -repeat = 3 -config = Left -end - -begin -prog = mythtv -button = RIGHT -repeat = 3 -config = Right -end - -# Channel Up -begin -prog = mythtv -button = Channel-UP -repeat = 3 -config = Up -end - -# Channel Down -begin -prog = mythtv -button = Channel-DOWN -repeat = 3 -config = Down -end - -# OK/Select -begin -prog = mythtv -button = Ok -config = Space -end - -# Play -begin -prog = mythtv -button = Play -config = Return -end - -# Stop -begin -prog = mythtv -button = Stop -config = I -end - -# Escape/Exit/Back -begin -prog = mythtv -button = BACK -config = Esc -end - -# Power Off/Exit -begin -prog = mythtv -button = POWER -config = Esc -end - - -# Pause -begin -prog = mythtv -button = Pause -repeat = 3 -config = P -end - -# Mute -begin -prog = mythtv -button = Mute -repeat = 3 -config = | -end - -# Fast forward (30 sec default) -begin -prog = mythtv -button = Rewind -repeat = 3 -config = PgUp -end - -# Rewind (10 sec default) -begin -prog = mythtv -button = Forward -repeat = 3 -config = PgDown -end - -# Skip forward (10 min default) -begin -prog = mythtv -button = Next -repeat = 3 -config = End -end - -# Skip backward (10 min default) -begin -prog = mythtv -button = Previous -repeat = 3 -config = Home -end - -# Record -begin -prog = mythtv -button = Record -repeat = 3 -config = R -end - -# Delete -begin -prog = mythtv -button = Red -repeat = 3 -config = D -end - -# Decrease play speed -begin -prog = mythtv -button = Green -repeat = 3 -config = J -end - -# Display EPG while in live TV, -# View selected show while in EPG -begin -prog = mythtv -button = Menu -repeat = 3 -config = M -end - -# Scroll up -begin -prog = mythtv -button = Volume-UP -repeat = 3 -config = F11 -end - -# Scroll down -begin -prog = mythtv -button = Volume-DOWN -repeat = 3 -config = F10 -end - -# Bring up OSD info -begin -prog = mythtv -button = Go -repeat = 3 -config = I -end - -# Change display aspect ratio -begin -prog = mythtv -button = Prev-Channel -repeat = 3 -config = W -end - -# double speed watch -begin -prog = mythtv -button = Yellow -repeat = 3 -config = J -end - -# change tuners -#begin -#prog = mythtv -#button = hash -#repeat = 3 -#config = Y -#end - -# Bring up Time stretch -begin -prog = mythtv -button = Blue -repeat = 3 -config = Y -end - -# Numbers 0-9 - -begin -prog = mythtv -button = 0 -repeat = 3 -config = 0 -end - -begin -prog = mythtv -button = 1 -repeat = 3 -config = 1 -end - -begin -prog = mythtv -button = 2 -repeat = 3 -config = 2 -end - -begin -prog = mythtv -button = 3 -repeat = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -repeat = 3 -config = 4 -end - -begin -prog = mythtv -button = 5 -repeat = 3 -config = 5 -end - -begin -prog = mythtv -button = 6 -repeat = 3 -config = 6 -end - -begin -prog = mythtv -button = 7 -repeat = 3 -config = 7 -end - -begin -prog = mythtv -button = 8 -repeat = 3 -config = 8 -end - -begin -prog = mythtv -button = 9 -repeat = 3 -config = 9 -end - - -### MPlayer lirc setup - -# Show OSD -begin -prog = mplayer -button = MENU -repeat = 3 -config = osd -end - -# Pause playback -begin -prog = mplayer -button = PAUSE -repeat = 3 -config = pause -end - -# Skip ahead a minute if playing -# If paused, resume playing -begin -prog = mplayer -button = PLAY -repeat = 3 -config = seek +1 -end - -# Stop playback and exit -begin -prog = mplayer -button = Back -repeat = 3 -config = quit -end - -# Mute -begin -prog = mplayer -button = MUTE -repeat = 3 -config = mute -end - -# Seek back 10 seconds -begin -prog = mplayer -button = LEFT -repeat = 3 -config = seek -7 -end - -# Seek forward 30 seconds -begin -prog = mplayer -button = RIGHT -repeat = 3 -config = seek +30 -end - -# Quit -begin -prog = mplayer -button = EXIT -repeat = 3 -config = quit -end - -# Seek forward 10 minutes -begin -prog = mplayer -button = SKIP -repeat = 3 -config = seek +600 -end - -# Seek backward 10 minutes -begin -prog = mplayer -button = REPLAY -repeat = 3 -config = seek -600 -end - -# Toggle full-screen -begin -prog = mplayer -button = FULL -repeat = 3 -config = vo_fullscreen -end - -### Xine lirc setup - -begin -prog = xine -button = PLAY -repeat = 3 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 3 -config = Stop -end - -begin -prog = xine -button = OFF -repeat = 3 -config = Quit -end - -begin -prog = xine -button = PAUSE -repeat = 3 -config = Pause -end - -begin -prog = xine -button = CH+ -repeat = 3 -config = EventUp -end - -begin -prog = xine -button = CH- -repeat = 3 -config = EventDown -end - -begin -prog = xine -button = VOL- -repeat = 3 -config = EventLeft -end - -begin -prog = xine -button = VOL+ -repeat = 3 -config = EventRight -end - -begin -prog = xine -button = OK -repeat = 3 -config = EventSelect -end - -begin -prog = xine -button = BACK -repeat = 3 -config = Menu -end - -begin -prog = xine -button = FFW -repeat = 3 -#config = SpeedFaster -config = SeekRelative+60 -end - -begin -prog = xine -button = REW -repeat = 3 -#config = SpeedSlower -config = SeekRelative-60 -end - -begin -prog = xine -button = FULL -repeat = 3 -config = Volume+ -end - -begin -prog = xine -button = BLANK -repeat = 3 -config = Volume- -end - -begin -prog = xine -button = MUTE -repeat = 3 -config = Mute -end - -begin -prog = xine -button = MENU -repeat = 3 -config = RootMenu -end - -begin -prog = xine -button = SKIP -repeat = 3 -config = EventNext -end - -begin -prog = xine -button = REPLAY -repeat = 3 -config = EventPrior -end - -begin -prog = xine -button = GO -repeat = 3 -config = OSDStreamInfos -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end - -begin -prog = xine -button = RED -repeat = 3 -config = Quit -end \ No newline at end of file diff --git a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg b/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg deleted file mode 100644 index a1fbc6e..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/snapstream_firefly/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap b/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap deleted file mode 100644 index 8e453b9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/streamzap/lircd.conf.streamzap +++ /dev/null @@ -1,69 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.7.1-CVS(serial) on Fri Feb 4 23:20:56 2005 -# -# contributed by Christoph Bartelmus -# -# brand: Streamzap -# model no. of remote control: PC Remote -# devices being controlled by this remote: USB receiver -# - -begin remote - - name Streamzap_PC_Remote - bits 6 - flags RC5|CONST_LENGTH - eps 30 - aeps 100 - - one 889 889 - zero 889 889 - plead 889 - pre_data_bits 8 - pre_data 0xA3 - gap 108344 - toggle_bit 2 - - - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - POWER 0x0A - MUTE 0x0B - CH_UP 0x0C - VOL_UP 0x0D - CH_DOWN 0x0E - VOL_DOWN 0x0F - UP 0x10 - LEFT 0x11 - OK 0x12 - RIGHT 0x13 - DOWN 0x14 - MENU 0x15 - EXIT 0x16 - PLAY 0x17 - PAUSE 0x18 - STOP 0x19 - |<< 0x1A - >>| 0x1B - RECORD 0x1C - << 0x1D - >> 0x1E - RED 0x20 - GREEN 0x21 - YELLOW 0x22 - BLUE 0x23 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc b/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc deleted file mode 100755 index 5e668b5..0000000 --- a/abs/core-testing/live-installer/templates/remotes/streamzap/lircrc +++ /dev/null @@ -1,832 +0,0 @@ -# StreamZap Remote -# 'config' must either be a literal key, e.g. 'config = l' or must -# refer to a defined key in MythTV, e.g. 'config = PLAY'a - - -#restart frontend -begin - remote = RS_LD - button = RESET - prog = irexec - repeat = 0 - config = /usr/bin/restartfrontend.sh -end - -#time -begin - remote = RS_LD - button = TIME - prog = irexec - repeat = 10 - config = /usr/bin/saytime.sh -end - -#screen blank -begin - remote = RS_LD - button = BLANK - prog = irexec - repeat = 0 -# config = ls - config = xset s activate ; xset s blank -end - - -#picture -begin -REMOTE = RS_LD -prog = mythtv -button = PICTURE -repeat = 4 -config = f -end - -#change aspect -begin -remote = RS_LD -prog = mythtv -button = ASPECT -# change aspect ratio -config = w -end - -#Browse -begin -remote = RS_LD -prog = mythtv -button = BROWSE -repeat = 8 -config = o -end - -# delete key -begin -remote = RS_LD -prog = mythtv -button = DELETE -repeat = 8 -config = d -end - - -#change card -begin -remote = RS_LD -prog = mythtv -button = CARD -repeat = 8 -config = y -end - -# Change TV card input -begin -remote = RS_LD -prog = mythtv -button = CARD_SOURCE -repeat = 4 -config = C -end - - - -# Cycle through channel history -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = BLUE -repeat = 4 -config = H -end - -# Bring up OSD info -begin -remote = Streamzap_PC_Remote -prog = mythtv -button = YELLOW -repeat = 4 -config = i -end - - - - -begin -prog = mythtv -button = 0 -config = 0 -end - -begin -prog = mythtv -button = 1 -config = 1 -end - -begin -prog = mythtv -button = 2 -config = 2 -end - -begin -prog = mythtv -button = 3 -config = 3 -end - -begin -prog = mythtv -button = 4 -config = 4 -end - -begin -prog = mythtv -button = 5 -config = 5 -end - -begin -prog = mythtv -button = 6 -config = 6 -end - -begin -prog = mythtv -button = 7 -config = 7 -end - -begin -prog = mythtv -button = 8 -config = 8 -end - -begin -prog = mythtv -button = 9 -config = 9 -end - -begin -prog = mythtv -button = POWER -config = Esc -end - -# ??? -begin -prog = mythtv -button = MUTE -config = F9 -end - -begin -prog = mythtv -button = CH_UP -repeat = 3 -config = PgUp -end - -begin -prog = mythtv -button = VOL_UP -repeat = 3 -config = ] -end - -begin -prog = mythtv -button = CH_DOWN -repeat = 3 -config = PgDown -end - -begin -prog = mythtv -button = VOL_DOWN -repeat = 3 -config = [ -end - -begin -prog = mythtv -button = UP -repeat = 3 -config = Up -end - -begin -prog = mythtv -button = LEFT -# navigates, or skips back during playback or live tv. -config = Left -end - -begin -prog = mythtv -button = OK -config = Return -end - -begin -prog = mythtv -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = Right -end - -begin -prog = mythtv -button = DOWN -repeat = 3 -config = Down -end - -begin -prog = mythtv -button = MENU -config = m -end - -begin -prog = mythtv -button = EXIT -config = Esc -end - -begin -prog = mythtv -button = PLAY -config = Space -end - -begin -prog = mythtv -button = PAUSE -config = p -end - -begin -prog = mythtv -button = STOP -config = Esc -end - -begin -prog = mythtv -# skip backward -button = |<< -config = PgUp -end - -begin -prog = mythtv -# skip forward -button = >>| -config = PgDown -end - -begin -prog = mythtv -button = RECORD -config = r -end - -begin -prog = mythtv -# rewind -button = << -config = Home -end - -begin -prog = mythtv -# fast forward -button = >> -config = End -end - -begin -prog = mythtv -button = RED -# Delete -config = d -end - -begin -prog = mythtv -button = GREEN -# Info -config = i -end - -#begin -#prog = mythtv -#button = YELLOW -# change aspect ratio -#config = w -#end - -begin -prog = mythtv -button = BLUE -config = Tab -end - -# MPLAYER -begin -prog = mplayer -button = POWER -config = quit -end - -begin -prog = mplayer -button = MUTE -config = mute -end - -begin -prog = mplayer -button = VOL_UP -repeat = 3 -config = volume +1 -end - -begin -prog = mplayer -button = VOL_DOWN -repeat = 3 -config = volume -1 -end - -begin -prog = mplayer -button = UP -repeat = 3 -config = seek +10 -end - -begin -prog = mplayer -button = LEFT -# navigates, or skips back during playback or live tv. -config = seek -60 -end - -begin -prog = mplayer -button = RIGHT -# navigates, or skips forwards during playback or live tv. -config = seek +60 -end - -begin -prog = mplayer -button = DOWN -repeat = 3 -config = seek -10 -end - -begin -prog = mplayer -button = EXIT -config = quit -end - -begin -prog = mplayer -button = play -config = speed_set 1.0 -end - -begin - prog = mplayer - button = pause - config = pause -end - -begin -prog = mplayer -button = STOP -config = quit -end - -begin -prog = mplayer -# skip backward -button = |<< -config = seek -600 -end - -begin -prog = mplayer -# skip forward -button = >>| -config = seek +600 -end - -begin -prog = mplayer -# slow forward -button = << -config = speed_mult 0.5 -end - -begin -prog = mplayer -# fast forward -button = >> -config = speed_mult 2.0 -end - -### xine commands - -begin -prog = xine -button = YELLOW -repeat = 4 -#config = ToggleVisiblity -config = OSDStreamInfos -end - -begin -prog = xine -button = MENU -repeat = 4 -config = SeekRelative+60 -end - -# increase brightness by 10 -begin - button = DELETE - prog = xine - repeat = 4 - config = BrightnessControl+ -end - -# decrease brightness by 10 -begin - button = PICTURE - prog = xine - repeat = 4 - config = BrightnessControl- -end - - -begin -prog = xine -button = PAUSE -repeat = 4 -config = Pause -end - -begin -prog = xine -button = PLAY -repeat = 4 -config = Play -end - -begin -prog = xine -button = STOP -repeat = 4 -config = quit -end - -begin -prog = xine -button = MUTE -repeat = 4 -config = mute -end - -begin -prog = xine -button = << -repeat = 4 -config = SeekRelative-30 -end - -begin -prog = xine -button = >> -repeat = 4 -#config = SeekRelative+30 -config = SpeedFaster -end - -begin -prog = xine -button = POWER -repeat = 4 -config = quit -end - -begin -prog = xine -button = EXIT -repeat = 4 -config = quit -end - - -begin -prog = xine -button = FREEZE -repeat = 4 -config = SeekRelative+1200 -end - -begin -prog = xine -button = MOVE -repeat = 4 -config = SeekRelative-1200 -end - -begin -prog = xine -button = 3 -config = SpuNext -repeat = 0 -end - -# Select previous sub picture (subtitle) channel. -begin -button = 1 -prog = xine -repeat = 0 -config = SpuPrior -end - -# Select next audio channel. -begin -button = 9 -prog = xine -repeat = 0 -config = AudioChannelNext -end - -# Select previous audio channel. -begin -button = 7 -prog = xine -repeat = 0 -config = AudioChannelPrior -end - - - -# Up event. -begin - -button = UP -prog = xine -repeat = 8 -config = EventUp -end - -# Down event. -begin - -button = DOWN -prog = xine -repeat = 8 -config = EventDown -end - -# Left event. -begin - -button = LEFT -prog = xine -repeat = 8 -config = EventLeft -end - -# Right event. -begin - -button = RIGHT -prog = xine -repeat = 8 -config = EventRight -end - -# Select event. -begin -prog = xine -button = ok -repeat = 8 -config = EventSelect -end - -# Down Chapter -begin - -button = CH_DOWN -prog = xine -repeat = 8 -config = EventPrior -end - -# Next Chapter. -begin - -button = CH_UP -prog = xine -repeat = 8 -config = EventNext -end - -# menu. -begin - -button = record -prog = xine -repeat = 8 -config = RootMenu -end - -# Toggle aspect ratio -begin -prog = xine -button = ASPECT -repeat = 0 -config = ToggleAspectRatio -end - - - -#######xmms -begin xmms - begin - prog = xmms - button = PLAY - config = PLAY - end - begin - prog = xmms - button = clear - config = PLAYLIST_CLEAR - end - begin - prog = xmms - button = load - config = PLAYLIST_ADD .xmms/xmms.m3u - end - begin - prog = xmms - button = PAUSE - config = PAUSE - end - begin - prog = xmms - button = STOP - config = STOP - end - begin - prog = xmms - button = EXIT - config = QUIT - flags = mode - end - - begin - prog = xmms - button = POWER - config = QUIT - flags = mode - end - - begin - prog = xmms - button = CH_UP - config = NEXT - end - begin - prog = xmms - button = CH_DOWN - config = PREV - end - - - -begin - prog = xmms - button = >>| - config = NEXT - end -begin - prog = xmms - button = |<< - config = PREV -end - - -begin - prog = xmms - button = << - config = FWD 10 - repeat = 2 - end - begin - prog = xmms - button = << - config = BWD 10 - repeat = 2 - end - begin - prog = xmms - button = volup - config = VOL_UP 10 - repeat = 2 - end - begin - prog = xmms - button = voldown - config = VOL_DOWN 10 - repeat = 2 - end - begin - prog = xmms - button = 1 - config = ONE - end - begin - prog = xmms - button = 2 - config = TWO - end - begin - prog = xmms - button = 3 - config = THREE - end - begin - prog = xmms - button = 4 - config = FOUR - end - begin - prog = xmms - button = 5 - config = FIVE - end - begin - prog = xmms - button = 6 - config = SIX - end - begin - prog = xmms - button = 7 - config = SEVEN - end - begin - prog = xmms - button = 8 - config = EIGHT - end - begin - prog = xmms - button = 9 - config = NINE - end - begin - prog = xmms - button = 0 - config = ZERO - end - begin - prog = xmms - button = enter - config = SETPOS - end -end xmms - -# - - - - - - - - - - - - - - - - - - - diff --git a/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg b/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg deleted file mode 100644 index 4d1a5fe..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/streamzap/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI b/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI deleted file mode 100644 index 6dd84f9..0000000 --- a/abs/core-testing/live-installer/templates/remotes/technisat/lircd.conf.mediafocusI +++ /dev/null @@ -1,42 +0,0 @@ -# -# this config file was automatically generated -# using lirc-0.6.2 on Mon Sep 4 22:17:47 2000 -# -# contributed by Peter Schlaf -# -# brand: Technisat -# model: -# supported devices: MediaFocus PC card -# - -begin remote - - name TECHNISAT - bits 10 - flags SPACE_ENC|CONST_LENGTH - eps 20 - aeps 150 - - one 141 7590 - zero 141 5090 - ptrail 141 - pre_data_bits 1 - pre_data 0x1 - gap 121440 - repeat_bit 0 - toggle_bit 2 - - frequency 38000 - duty_cycle 33 - - begin codes - MUTE 0x0000000000000046 - VOL+ 0x000000000000006E - VOL- 0x000000000000006F - CH+ 0x0000000000000047 - CH- 0x0000000000000048 - end codes - -end remote - - diff --git a/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230 b/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230 deleted file mode 100644 index 9562f60..0000000 --- a/abs/core-testing/live-installer/templates/remotes/tekram/lircd.conf.m230 +++ /dev/null @@ -1,48 +0,0 @@ -# -# This is for the remote that Tekram bundles with its M230 card (Mach64) -# Commands from the remote are hardware-decoded -# -# contributed by Froenchenko Leonid -# -# brand: Tekram M230 (ATI Mach64) -# supported devices: This remote control comes with TV Tuner cards from -# Tekram based on ATI 264VT (btt829) -# - -begin remote - name M230 - bits 8 - begin codes - 0 0x00 - 1 0x01 - 2 0x02 - 3 0x03 - 4 0x04 - 5 0x05 - 6 0x06 - 7 0x07 - 8 0x08 - 9 0x09 - RECALL 0x0A - ENTER 0x17 - POWER 0x1C - SOURCE 0x15 - PC_VID 0x12 - STILL 0x11 - TTX 0x0F - FAV 0x13 - MUTE 0x10 - VOL_UP 0x1A - VOL_DN 0x1E - CH_UP 0x1B - CH_DN 0x1F - PLAY 0x0D - STOP 0x0E - REW 0x1D - FFW 0x19 - ADD_ER 0x16 - FUNC 0x14 - F_PLUS 0x18 - F_MINUS 0x0C - end codes -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230 b/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230 deleted file mode 100644 index 0bacf5d..0000000 --- a/abs/core-testing/live-installer/templates/remotes/tekram/lircmd.conf.m230 +++ /dev/null @@ -1,33 +0,0 @@ -# -# lircmd config file for Tekram remote control -# Contributed by Froenchenko Leonid -# - -PROTOCOL IntelliMouse - -# ACCELERATOR start max multiplier - -#ACCELERATOR 2 30 5 - -ACTIVATE * MOUSE_MODE - -MOVE_N * 2 -MOVE_NE * 3 -MOVE_E * 6 -MOVE_SE * 9 -MOVE_S * 8 -MOVE_SW * 7 -MOVE_W * 4 -MOVE_NW * 1 - -# These are lircmd-0.5.5 extensions -MOVE_IN * VOL_UP -MOVE_OUT * VOL_DN - -BUTTON1_CLICK * RECALL -BUTTON2_CLICK * 0 -BUTTON3_CLICK * ENTER - -BUTTON1_TOGGLE * PLAY -BUTTON2_TOGGLE * STOP -BUTTON3_TOGGLE * REW diff --git a/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg b/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg deleted file mode 100644 index a034186..0000000 Binary files a/abs/core-testing/live-installer/templates/remotes/unknown/preview.jpg and /dev/null differ diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote b/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote deleted file mode 100644 index 73df340..0000000 --- a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mouseremote +++ /dev/null @@ -1,116 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# modified by Brian Craft -# -# brand: X10 -# model: MP3 MouseRemote, Model mk19a -# - -begin remote - - name mouseremote - bits 16 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 8 - pre_data 0x08 - post_data_bits 8 - post_data 0x7f - min_repeat 2 - gap 140000 - - begin codes - POWER 0x000000000000000F - PC 0x000000000000002B - LAST 0x000000000000004F - CHANUP 0x0000000000000002 - CHANDOWN 0x0000000000000003 - VOLUP 0x0000000000000006 - VOLDOWN 0x0000000000000007 - MUTE 0x0000000000000005 - 1 0x0000000000000041 - 2 0x0000000000000042 - 3 0x0000000000000043 - 4 0x0000000000000044 - 5 0x0000000000000045 - 6 0x0000000000000046 - 7 0x0000000000000047 - 8 0x0000000000000048 - 9 0x0000000000000049 - 0 0x0000000000000040 - ENTER 0x000000000000004a - ADOTB 0x000000000000005D - REWIND 0x000000000000001C - PLAY 0x000000000000000D - FFWD 0x000000000000001D - STOP 0x000000000000000E - PAUSE 0x000000000000004E - RECORD 0x00000000000000FF - ENTER 0x000000000000004A - LAST 0x000000000000004F - DISP 0x000000000000005C - SHIFT 0x000000000000006B - GUIDE 0x000000000000006D - SELECT 0x0000000000000093 - PHONE 0x000000000000004B - WEB 0x000000000000008B - CD 0x00000000000000AB - DVD 0x00000000000000CB - MOUSE_SLOW_N 0x0000000000000110 - MOUSE_SLOW_NNE 0x0000000000000131 - MOUSE_SLOW_NE 0x0000000000000111 - MOUSE_SLOW_ENE 0x0000000000000113 - MOUSE_SLOW_E 0x0000000000000101 - MOUSE_SLOW_ESE 0x0000000000000193 - MOUSE_SLOW_SE 0x0000000000000191 - MOUSE_SLOW_SSE 0x00000000000001B1 - MOUSE_SLOW_S 0x0000000000000190 - MOUSE_SLOW_SSW 0x00000000000001B9 - MOUSE_SLOW_SW 0x0000000000000199 - MOUSE_SLOW_WSW 0x000000000000019B - MOUSE_SLOW_W 0x0000000000000109 - MOUSE_SLOW_WNW 0x000000000000011B - MOUSE_SLOW_NW 0x0000000000000119 - MOUSE_SLOW_NNW 0x0000000000000139 - MOUSE_MEDIUM_N 0x0000000000000310 - MOUSE_MEDIUM_NNE 0x0000000000000331 - MOUSE_MEDIUM_NE 0x0000000000000311 - MOUSE_MEDIUM_ENE 0x0000000000000313 - MOUSE_MEDIUM_E 0x0000000000000301 - MOUSE_MEDIUM_ESE 0x0000000000000393 - MOUSE_MEDIUM_SE 0x0000000000000391 - MOUSE_MEDIUM_SSE 0x00000000000003B1 - MOUSE_MEDIUM_S 0x0000000000000390 - MOUSE_MEDIUM_SSW 0x00000000000003B9 - MOUSE_MEDIUM_SW 0x0000000000000399 - MOUSE_MEDIUM_WSW 0x000000000000039B - MOUSE_MEDIUM_W 0x0000000000000309 - MOUSE_MEDIUM_WNW 0x000000000000031B - MOUSE_MEDIUM_NW 0x0000000000000319 - MOUSE_MEDIUM_NNW 0x0000000000000339 - MOUSE_FAST_N 0x0000000000000510 - MOUSE_FAST_NNE 0x0000000000000531 - MOUSE_FAST_NE 0x0000000000000511 - MOUSE_FAST_ENE 0x0000000000000513 - MOUSE_FAST_E 0x0000000000000501 - MOUSE_FAST_ESE 0x0000000000000593 - MOUSE_FAST_SE 0x0000000000000591 - MOUSE_FAST_SSE 0x00000000000005B1 - MOUSE_FAST_S 0x0000000000000590 - MOUSE_FAST_SSW 0x00000000000005B9 - MOUSE_FAST_SW 0x0000000000000599 - MOUSE_FAST_WSW 0x000000000000059B - MOUSE_FAST_W 0x0000000000000509 - MOUSE_FAST_WNW 0x000000000000051B - MOUSE_FAST_NW 0x0000000000000519 - MOUSE_FAST_NNW 0x0000000000000539 - BUTTONR_DOWN 0x0000000000000801 - BUTTONL_DOWN 0x0000000000000804 - BUTTON_UP 0x0000000000000800 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere b/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere deleted file mode 100644 index c9bb727..0000000 --- a/abs/core-testing/live-installer/templates/remotes/x10/lircd.conf.mp3anywhere +++ /dev/null @@ -1,64 +0,0 @@ -# -# -# contributed by Isaac Lauer -# modified by Shawn Nycz -# -# brand: X10 -# model: MP3 Anywhere Remote, Model UR81A -# supported devices: at least FireCracker Receiver Model MR26A, maybe more -# - -begin remote - - name mp3anywhere - bits 8 - eps 30 - aeps 100 - one 0 0 - zero 0 0 - pre_data_bits 24 - pre_data 0xD5AAEE - min_repeat 2 - gap 140000 - - begin codes - POWER 0x00000000000000F0 - PC 0x00000000000000D4 - LAST 0x00000000000000F2 - CHANUP 0x0000000000000040 - CHANDOWN 0x00000000000000C0 - VOLUP 0x0000000000000060 - VOLDOWN 0x00000000000000E0 - MUTE 0x00000000000000A0 - ONE 0x0000000000000082 - TWO 0x0000000000000042 - THREE 0x00000000000000C2 - FOUR 0x0000000000000022 - FIVE 0x00000000000000A2 - SIX 0x0000000000000062 - SEVEN 0x00000000000000E2 - EIGHT 0x0000000000000012 - NINE 0x0000000000000092 - ZERO 0x0000000000000002 - ENTER 0x0000000000000052 - ADOTB 0x00000000000000BA - A 0x000000000000003A - B 0x00000000000000D8 - C 0x00000000000000D6 - D 0x00000000000000D4 - MENU 0x00000000000000B6 - EXIT 0x00000000000000C9 - UP 0x00000000000000D5 - DOWN 0x00000000000000D3 - LEFT 0x00000000000000D2 - RIGHT 0x00000000000000D1 - OK 0x0000000000000052 - REWIND 0x0000000000000038 - PLAY 0x00000000000000B0 - FFWD 0x00000000000000B8 - RECORD 0x00000000000000FF - STOP 0x0000000000000070 - PAUSE 0x0000000000000072 - end codes - -end remote diff --git a/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote b/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote deleted file mode 100644 index c3c23b1..0000000 --- a/abs/core-testing/live-installer/templates/remotes/x10/lircmd.conf.mouseremote +++ /dev/null @@ -1,288 +0,0 @@ -# -# lircmd config file for the mouseremote control -# - -# ACCELERATOR start max multiplier - -ACCELERATOR 1 3 2 - -#ACTIVATE * MENU - - -MOVE_N mouseremote MOUSE_SLOW_N -MOVE_N mouseremote MOUSE_SLOW_N - -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N -MOVE_N mouseremote MOUSE_MEDIUM_N - -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N -MOVE_N mouseremote MOUSE_FAST_N - -MOVE_N mouseremote MOUSE_SLOW_NNE -MOVE_NE mouseremote MOUSE_SLOW_NNE - -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE -MOVE_N mouseremote MOUSE_MEDIUM_NNE -MOVE_NE mouseremote MOUSE_MEDIUM_NNE - -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE -MOVE_N mouseremote MOUSE_FAST_NNE -MOVE_NE mouseremote MOUSE_FAST_NNE - -MOVE_NE mouseremote MOUSE_SLOW_NE -MOVE_NE mouseremote MOUSE_SLOW_NE - -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE -MOVE_NE mouseremote MOUSE_MEDIUM_NE - -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE -MOVE_NE mouseremote MOUSE_FAST_NE - -MOVE_E mouseremote MOUSE_SLOW_ENE -MOVE_NE mouseremote MOUSE_SLOW_ENE - -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE -MOVE_E mouseremote MOUSE_MEDIUM_ENE -MOVE_NE mouseremote MOUSE_MEDIUM_ENE - -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE -MOVE_E mouseremote MOUSE_FAST_ENE -MOVE_NE mouseremote MOUSE_FAST_ENE - -MOVE_E mouseremote MOUSE_SLOW_E -MOVE_E mouseremote MOUSE_SLOW_E - -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E -MOVE_E mouseremote MOUSE_MEDIUM_E - -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E -MOVE_E mouseremote MOUSE_FAST_E - -MOVE_E mouseremote MOUSE_SLOW_ESE -MOVE_SE mouseremote MOUSE_SLOW_ESE - -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE -MOVE_E mouseremote MOUSE_MEDIUM_ESE -MOVE_SE mouseremote MOUSE_MEDIUM_ESE - -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE -MOVE_E mouseremote MOUSE_FAST_ESE -MOVE_SE mouseremote MOUSE_FAST_ESE - -MOVE_SE mouseremote MOUSE_SLOW_SE -MOVE_SE mouseremote MOUSE_SLOW_SE - -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE -MOVE_SE mouseremote MOUSE_MEDIUM_SE - -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE -MOVE_SE mouseremote MOUSE_FAST_SE - -MOVE_S mouseremote MOUSE_SLOW_SSE -MOVE_SE mouseremote MOUSE_SLOW_SSE - -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE -MOVE_S mouseremote MOUSE_MEDIUM_SSE -MOVE_SE mouseremote MOUSE_MEDIUM_SSE - -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE -MOVE_S mouseremote MOUSE_FAST_SSE -MOVE_SE mouseremote MOUSE_FAST_SSE - -MOVE_S mouseremote MOUSE_SLOW_S -MOVE_S mouseremote MOUSE_SLOW_S - -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S -MOVE_S mouseremote MOUSE_MEDIUM_S - -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S -MOVE_S mouseremote MOUSE_FAST_S - -MOVE_S mouseremote MOUSE_SLOW_SSW -MOVE_SW mouseremote MOUSE_SLOW_SSW - -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW -MOVE_S mouseremote MOUSE_MEDIUM_SSW -MOVE_SW mouseremote MOUSE_MEDIUM_SSW - -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW -MOVE_S mouseremote MOUSE_FAST_SSW -MOVE_SW mouseremote MOUSE_FAST_SSW - -MOVE_SW mouseremote MOUSE_SLOW_SW -MOVE_SW mouseremote MOUSE_SLOW_SW - -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW -MOVE_SW mouseremote MOUSE_MEDIUM_SW - -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW -MOVE_SW mouseremote MOUSE_FAST_SW - -MOVE_W mouseremote MOUSE_SLOW_WSW -MOVE_SW mouseremote MOUSE_SLOW_WSW - -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW -MOVE_W mouseremote MOUSE_MEDIUM_WSW -MOVE_SW mouseremote MOUSE_MEDIUM_WSW - -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW -MOVE_W mouseremote MOUSE_FAST_WSW -MOVE_SW mouseremote MOUSE_FAST_WSW - -MOVE_W mouseremote MOUSE_SLOW_W -MOVE_W mouseremote MOUSE_SLOW_W - -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W -MOVE_W mouseremote MOUSE_MEDIUM_W - -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W -MOVE_W mouseremote MOUSE_FAST_W - -MOVE_W mouseremote MOUSE_SLOW_WNW -MOVE_NW mouseremote MOUSE_SLOW_WNW - -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW -MOVE_W mouseremote MOUSE_MEDIUM_WNW -MOVE_NW mouseremote MOUSE_MEDIUM_WNW - -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW -MOVE_W mouseremote MOUSE_FAST_WNW -MOVE_NW mouseremote MOUSE_FAST_WNW - -MOVE_NW mouseremote MOUSE_SLOW_NW -MOVE_NW mouseremote MOUSE_SLOW_NW - -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW -MOVE_NW mouseremote MOUSE_MEDIUM_NW - -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW -MOVE_NW mouseremote MOUSE_FAST_NW - -MOVE_N mouseremote MOUSE_SLOW_NNW -MOVE_NW mouseremote MOUSE_SLOW_NNW - -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW -MOVE_N mouseremote MOUSE_MEDIUM_NNW -MOVE_NW mouseremote MOUSE_MEDIUM_NNW - -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW -MOVE_N mouseremote MOUSE_FAST_NNW -MOVE_NW mouseremote MOUSE_FAST_NNW - -BUTTON1_DOWN mouseremote BUTTONL_DOWN -BUTTON2_DOWN mouseremote BUTTONR_DOWN - -BUTTON1_UP mouseremote BUTTON_UP -BUTTON2_UP mouseremote BUTTON_UP diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.home b/abs/core-testing/live-installer/templates/samba/smb.conf.home deleted file mode 100755 index b850a7d..0000000 --- a/abs/core-testing/live-installer/templates/samba/smb.conf.home +++ /dev/null @@ -1,10 +0,0 @@ -[home] - path = /data/home/mythtv/ - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.media b/abs/core-testing/live-installer/templates/samba/smb.conf.media deleted file mode 100755 index 6a4ec91..0000000 --- a/abs/core-testing/live-installer/templates/samba/smb.conf.media +++ /dev/null @@ -1,10 +0,0 @@ -[media] - path = /data/media - public = yes - only guest = yes - writeable = yes - printable = no - force user = mythtv - force group = mythtv - create mask = 0755 - diff --git a/abs/core-testing/live-installer/templates/samba/smb.conf.template b/abs/core-testing/live-installer/templates/samba/smb.conf.template deleted file mode 100644 index 42ddb99..0000000 --- a/abs/core-testing/live-installer/templates/samba/smb.conf.template +++ /dev/null @@ -1,125 +0,0 @@ -# -#======================= Global Settings ===================================== -[global] - - workgroup = home_lan - server string = MythVantage - -# Security mode. Defines in which mode Samba will operate. Possible -# values are share, user, server, domain and ads. Most people will want -# user level security. See the Samba-HOWTO-Collection for details. - security = share - -# This option is important for security. It allows you to restrict -# connections to machines which are on your local network. The -# following example restricts access to two C class networks and -# the "loopback" interface. For more examples of the syntax see -# the smb.conf man page -; hosts allow = 192.168.1. 192.168.2. 127. - - load printers = no - -# you may wish to override the location of the printcap file -; printcap name = /etc/printcap - -; guest account = pcguest - -# this tells Samba to use a separate log file for each machine -# that connects - log file = /var/log/samba/log.%m - -# Put a capping on the size of the log files (in Kb). - max log size = 50 - -# Use password server option only with security = server -# The argument list may include: -# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] -# or to auto-locate the domain controller/s -# password server = * -; password server = - -# Use the realm option only with security = ads -# Specifies the Active Directory realm the host is part of -; realm = MY_REALM - -# Backend to store user information in. New installations should -# use either tdbsam or ldapsam. smbpasswd is available for backwards -# compatibility. tdbsam requires no further configuration. -; passdb backend = tdbsam - -# Using the following line enables you to customise your configuration -# on a per machine basis. The %m gets replaced with the netbios name -# of the machine that is connecting. -# Note: Consider carefully the location in the configuration file of -# this line. The included file is read at that point. -; include = /usr/local/samba/lib/smb.conf.%m - -# Configure Samba to use multiple interfaces -# If you have multiple network interfaces then you must list them -# here. See the man page for details. -; interfaces = 192.168.12.2/24 192.168.13.2/24 - -# Browser Control Options: -# set local master to no if you don't want Samba to become a master -# browser on your network. Otherwise the normal election rules apply -; local master = no - -# OS Level determines the precedence of this server in master browser -# elections. The default value should be reasonable -; os level = 33 - -# Domain Master specifies Samba to be the Domain Master Browser. This -# allows Samba to collate browse lists between subnets. Don't use this -# if you already have a Windows NT domain controller doing this job -; domain master = yes - -# Preferred Master causes Samba to force a local browser election on startup -# and gives it a slightly higher chance of winning the election -; preferred master = yes - -# Enable this if you want Samba to be a domain logon server for -# Windows95 workstations. -; domain logons = yes - -# if you enable domain logons then you may want a per-machine or -# per user logon script -# run a specific logon batch file per workstation (machine) -; logon script = %m.bat -# run a specific logon batch file per username -; logon script = %U.bat - -# Where to store roving profiles (only for Win95 and WinNT) -# %L substitutes for this servers netbios name, %U is username -# You must uncomment the [Profiles] share below -; logon path = \\%L\Profiles\%U - -# Windows Internet Name Serving Support Section: -# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server -; wins support = yes - -# WINS Server - Tells the NMBD components of Samba to be a WINS Client -# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both -; wins server = w.x.y.z - -# WINS Proxy - Tells Samba to answer name resolution queries on -# behalf of a non WINS capable client, for this to work there must be -# at least one WINS Server on the network. The default is NO. -; wins proxy = yes - -# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names -# via DNS nslookups. The default is NO. - dns proxy = no - -# These scripts are used on a domain controller or stand-alone -# machine to add or delete corresponding unix accounts -; add user script = /usr/sbin/useradd %u -; add group script = /usr/sbin/groupadd %g -; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u -; delete user script = /usr/sbin/userdel %u -; delete user from group script = /usr/sbin/deluser %u %g -; delete group script = /usr/sbin/groupdel %g - - -#============================ Share Definitions ============================== - - diff --git a/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core-testing/live-installer/templates/settings/default_1/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/live-installer/templates/settings/default_1/settings.txt b/abs/core-testing/live-installer/templates/settings/default_1/settings.txt deleted file mode 100644 index 8c3a391..0000000 --- a/abs/core-testing/live-installer/templates/settings/default_1/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme MythVantage-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style Windows REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoDefaultPlayer Internal REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME -HaltCommand sudo /sbin/poweroff REPLACEME -RebootCommand sudo /sbin/reboot REPLACEME diff --git a/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt b/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt deleted file mode 100644 index f82f2d2..0000000 --- a/abs/core-testing/live-installer/templates/settings/default_2/keybindings.txt +++ /dev/null @@ -1,209 +0,0 @@ -context action description keylist hostname -Music FFWD Fast forward PgDown REPLACEME -Music STOP Stop playback O REPLACEME -Music MUTE Mute |,\\\\,F9 REPLACEME -Gallery SCROLLUP Scroll image up 2 REPLACEME -Music VOLUMEDOWN Volume down [,{,F10 REPLACEME -Music VOLUMEUP Volume up ],},F11 REPLACEME -qt DELETE Delete D REPLACEME -Music RWND Rewind PgUp REPLACEME -qt EDIT Edit E REPLACEME -Music PAUSE Pause/Start playback P REPLACEME -Gallery RECENTER Recenter image 5 REPLACEME -Gallery FULLSIZE Full-size (un-zoom) image 0 REPLACEME -Gallery LOWRIGHT Go to the lower-right corner of the image PgDown REPLACEME -Gallery SCROLLRIGHT Scroll image right 6 REPLACEME -Gallery MENU Toggle activating menu in thumbnail view M REPLACEME -Gallery SCROLLDOWN Scroll image down 8 REPLACEME -Gallery ZOOMIN Zoom image in 9 REPLACEME -Gallery UPLEFT Go to the upper-left corner of the image PgUp REPLACEME -Gallery RANDOMSHOW Start Random Slideshow in thumbnail view R REPLACEME -Gallery ROTLEFT Rotate image left 90 degrees [,1 REPLACEME -Gallery SLIDESHOW Start Slideshow in thumbnail view S REPLACEME -Gallery ROTRIGHT Rotate image right 90 degrees ],3 REPLACEME -Gallery END Go to the last image in thumbnail view End REPLACEME -Gallery HOME Go to the first image in thumbnail view Home REPLACEME -Gallery SCROLLLEFT Scroll image left 4 REPLACEME -Gallery PLAY Start/Stop Slideshow P REPLACEME -NetFlix REMOVE Removes movie from queue D REPLACEME -Archive TOGGLECUT Toggle use cut list state for selected program C REPLACEME -Gallery ZOOMOUT Zoom image out 7 REPLACEME -NetFlix MOVETOTOP Moves movie to top of queue 1 REPLACEME -Global DOWN Down Arrow Down REPLACEME -ITV Menu MENUTEXT Menu Text F7 REPLACEME -ITV Menu TEXTEXIT Menu Exit F6 REPLACEME -Global LEFT Left Arrow Left REPLACEME -Global RIGHT Right Arrow Right REPLACEME -Global UP Up Arrow Up REPLACEME -Global MENU Pop-up menu M REPLACEME -Global PREVVIEW Previous View Home REPLACEME -Global ESCAPE Escape Esc REPLACEME -Global PAGEUP Page Up PgUp REPLACEME -Global SELECT Select Return,Enter,Space REPLACEME -Global HELP Help F1 REPLACEME -Global INFO More information I REPLACEME -Global NEXTVIEW Next View End REPLACEME -ITV Menu MENUBLUE Menu Blue F5 REPLACEME -Global PAGEDOWN Page Down PgDown REPLACEME -Global EJECT Eject Removable Media REPLACEME -Global 3 3 3 REPLACEME -Global 1 1 1 REPLACEME -Global 6 6 6 REPLACEME -Global 0 0 0 REPLACEME -Global 2 2 2 REPLACEME -Global 4 4 4 REPLACEME -TV Frontend DELETE Delete Program D REPLACEME -Global 8 8 8 REPLACEME -Global 7 7 7 REPLACEME -TV Frontend PAGEDOWN Page Down 9 REPLACEME -TV Frontend PAGEUP Page Up 3 REPLACEME -Global 5 5 5 REPLACEME -TV Frontend CHANGERECGROUP Change Recording Group REPLACEME -Global 9 9 9 REPLACEME -Video END Go to the last video End REPLACEME -Video INCPARENT Increase Parental Level ],},F11 REPLACEME -Weather PAUSE Pause current page P REPLACEME -TV Frontend TOGGLERECORD Toggle recording status of current program R REPLACEME -Video BROWSE Change browsable in video manager B REPLACEME -Welcome SHOWSETTINGS Show Mythshutdown settings F11 REPLACEME -Video HOME Go to the first video Home REPLACEME -Video FILTER Open video filter dialog F REPLACEME -Welcome STARTXTERM Open an Xterm window F12 REPLACEME -Music INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music BLANKSCR Blank screen 5 REPLACEME -Video DELETE Delete video D REPLACEME -Music THMBUP Increase rating 9 REPLACEME -Music CYCLEVIS Cycle visualizer mode 6 REPLACEME -Teletext Menu REVEAL Reveal hidden Text F8 REPLACEME -Music INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -TV Frontend PLAYBACK Play Program P REPLACEME -News FORCERETRIEVE Force update news items M REPLACEME -Video DECPARENT Decrease Parental Level [,{,F10 REPLACEME -News RETRIEVENEWS Update news items I REPLACEME -News CANCEL Cancel news item updating C REPLACEME -Teletext Menu TOGGLEBACKGROUND Toggle Background F7 REPLACEME -Teletext Menu MENUWHITE Menu White F6 REPLACEME -ITV Menu MENURED Menu Red F2 REPLACEME -ITV Menu MENUYELLOW Menu Yellow F4 REPLACEME -ITV Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu PREVSUBPAGE Previous Subpage Left REPLACEME -Teletext Menu MENUYELLOW Menu Yellow F4 REPLACEME -Teletext Menu MENUGREEN Menu Green F3 REPLACEME -Teletext Menu NEXTSUBPAGE Next Subpage Right REPLACEME -Teletext Menu MENUBLUE Menu Blue F5 REPLACEME -Teletext Menu TOGGLETT Toggle Teletext T REPLACEME -Teletext Menu NEXTPAGE Next Page Down REPLACEME -TV Editing LOADCOMMSKIP Load cut list from commercial skips Z,End REPLACEME -TV Editing BIGJUMPREW Jump back 10x the normal amount ,,< REPLACEME -TV Editing BIGJUMPFWD Jump forward 10x the normal amount >,. REPLACEME -TV Playback JUMPTODVDROOTMENU Jump to the DVD Root Menu REPLACEME -Teletext Menu MENURED Menu Red F2 REPLACEME -TV Playback SIGNALMON Monitor Signal Quality F7 REPLACEME -Teletext Menu PREVPAGE Previous Page Up REPLACEME -TV Editing INVERTMAP Invert Begin/End cut points I REPLACEME -TV Playback PLAY Play Ctrl+P REPLACEME -TV Editing PREVCUT Jump to the previous cut point PgUp REPLACEME -TV Editing NEXTCUT Jump to the next cut point PgDown REPLACEME -TV Playback CYCLECOMMSKIPMODE Cycle Commercial Skip mode REPLACEME -TV Playback TOGGLESLEEP Toggle the Sleep Timer F8 REPLACEME -TV Playback JUMPREC Display menu of recorded programs to jump to REPLACEME -TV Playback FINDER Show the Program Finder # REPLACEME -TV Playback ADJUSTSTRETCH Turn on time stretch control A REPLACEME -TV Editing CLEARMAP Clear editing cut points C,Q,Home REPLACEME -TV Editing TOGGLEEDIT Exit out of Edit Mode E REPLACEME -TV Playback TOGGLESTRETCH Toggle time stretch speed REPLACEME -TV Playback TOGGLERECCONTROLS Recording picture adjustments for this recorder G REPLACEME -TV Playback TOGGLEAUDIOSYNC Turn on audio sync adjustment controls REPLACEME -TV Playback TOGGLEEDIT Start Edit Mode E REPLACEME -TV Playback SPEEDINC Increase the playback speed U REPLACEME -TV Playback STRETCHDEC Decrease time stretch speed REPLACEME -TV Playback SPEEDDEC Decrease the playback speed J REPLACEME -TV Playback TOGGLECHANCONTROLS Recording picture adjustments for this channel Ctrl+G REPLACEME -TV Playback GUIDE Show the Program Guide S REPLACEME -TV Playback JUMPPREV Jump to previously played recording REPLACEME -TV Playback QUEUETRANSCODE Queue the current recording for transcoding X REPLACEME -TV Playback STRETCHINC Increase time stretch speed REPLACEME -TV Playback TOGGLEPICCONTROLS Playback picture adjustments F REPLACEME -TV Playback PREVCC708 Previous ATSC CC track REPLACEME -TV Playback NEXTCC708 Next ATSC CC track REPLACEME -TV Playback NEXTCC Next of any captions REPLACEME -TV Playback NEXTSCAN Next video scan overidemode REPLACEME -TV Playback NEXTCC608 Next VBI CC track REPLACEME -TV Playback PREVCC608 Previous VBI CC track REPLACEME -TV Playback PREVAUDIO Previous audio track - REPLACEME -TV Playback PREVSUBTITLE Previous subtitle track REPLACEME -TV Playback NEXTSUBTITLE Next subtitle track REPLACEME -TV Playback NEXTAUDIO Next audio track + REPLACEME -TV Playback SELECTCC708_3 Display ATSC CC4 REPLACEME -TV Playback SELECTCC708_0 Display ATSC CC1 REPLACEME -TV Playback SELECTCC608_1 Display VBI CC2 REPLACEME -TV Playback SELECTAUDIO_0 Play audio track 1 REPLACEME -TV Playback SELECTCC608_2 Display VBI CC3 REPLACEME -TV Playback TOGGLETTM Toggle Teletext Menu REPLACEME -TV Playback SELECTSUBTITLE_1 Display subtitle 2 REPLACEME -TV Playback SELECTCC608_3 Display VBI CC4 REPLACEME -TV Playback SELECTCC708_1 Display ATSC CC2 REPLACEME -TV Playback SELECTCC708_2 Display ATSC CC3 REPLACEME -TV Playback SELECTAUDIO_1 Play audio track 2 REPLACEME -TV Playback SELECTSUBTITLE_0 Display subtitle 1 REPLACEME -TV Playback TOGGLETTC Toggle Teletext Captions REPLACEME -TV Playback SELECTCC608_0 Display VBI CC1 REPLACEME -TV Playback SWAPPIP Swap PiP/Main N REPLACEME -TV Playback TOGGLEASPECT Toggle the display aspect ratio W REPLACEME -TV Playback TOGGLECC708 Toggle ATSC CC REPLACEME -TV Playback TOGGLECC608 Toggle VBI CC REPLACEME -TV Playback TOGGLEPIPMODE Toggle Picture-in-Picture mode V REPLACEME -TV Playback TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Playback TOGGLEPIPWINDOW Toggle active PiP window B REPLACEME -TV Playback MUTE Mute |,\\\\,F9 REPLACEME -TV Playback TOGGLEBROWSE Toggle channel browse mode O REPLACEME -TV Playback TOGGLESUBTITLE Toggle Subtitles REPLACEME -TV Playback VOLUMEUP Volume up ],},F11 REPLACEME -TV Playback TOGGLECC Toggle any captions T REPLACEME -TV Playback JUMPSTART Jump to the start of the recording. Ctrl+B REPLACEME -TV Playback TOGGLERECORD Toggle recording status of current program R REPLACEME -TV Playback SKIPCOMMERCIAL Skip Commercial Z,End REPLACEME -TV Playback VOLUMEDOWN Volume down [,{,F10 REPLACEME -TV Playback SWITCHCARDS Switch Capture Cards Y REPLACEME -TV Playback SKIPCOMMBACK Skip Commercial (Reverse) Q,Home REPLACEME -TV Playback TOGGLEINPUTS Toggle Inputs C REPLACEME -TV Playback FFWDSTICKY Fast Forward (Sticky) or Forward one frame while paused >,. REPLACEME -TV Playback JUMPFFWD Jump ahead PgDown REPLACEME -TV Playback PREVCHAN Switch to the previous channel H REPLACEME -TV Playback JUMPBKMRK Jump to bookmark K REPLACEME -TV Playback RWNDSTICKY Rewind (Sticky) or Rewind one frame while paused ,,< REPLACEME -TV Playback NEXTFAV Switch to the next favorite channel / REPLACEME -TV Playback JUMPRWND Jump back PgUp REPLACEME -TV Playback SEEKRWND Rewind Left REPLACEME -TV Playback SEEKFFWD Fast Forward Right REPLACEME -TV Playback CHANNELDOWN Channel down Down REPLACEME -TV Playback CHANNELUP Channel up Up REPLACEME -TV Playback ARBSEEK Arbitrary Seek * REPLACEME -TV Playback DELETE Delete Program D REPLACEME -TV Playback CLEAROSD Clear OSD Backspace REPLACEME -TV Frontend DETAILS Show program details U REPLACEME -TV Frontend CUSTOMEDIT Edit Custom Record Rule E REPLACEME -TV Frontend UPCOMING List upcoming episodes O REPLACEME -TV Frontend CHANUPDATE Switch channels without exiting guide in Live TV mode. X REPLACEME -TV Frontend RANKDEC Decrease program or channel rank Left REPLACEME -TV Frontend VIEWCARD Switch Capture Card view Y REPLACEME -TV Playback PAUSE Pause P REPLACEME -TV Frontend RANKINC Increase program or channel rank Right REPLACEME -TV Frontend PAGERIGHT Page the program guide right >,. REPLACEME -TV Frontend PAGELEFT Page the program guide left ,,< REPLACEME -TV Frontend NEXTFAV Toggle showing all channels or just favorites in the program guide. / REPLACEME -Gallery DELETE Delete marked images or current image if none are marked D REPLACEME -TV Frontend DAYRIGHT Page the program guide forward one day End,1 REPLACEME -Gallery MARK Mark image T REPLACEME -Game TOGGLEFAV Toggle the current game as a favorite ?,/ REPLACEME -TV Frontend TOGGLEFAV Toggle the current channel as a favorite ? REPLACEME -TV Frontend DAYLEFT Page the program guide back one day Home,7 REPLACEME -Music PREVTRACK Move to the previous track ,,<,Q,Home REPLACEME -Game INCSEARCHNEXT Incremental search find next match Ctrl+N REPLACEME -Music DELETE Delete track from playlist D REPLACEME -Gallery INFO Toggle Showing Information about Image I REPLACEME -Game INCSEARCH Show incremental search dialog Ctrl+S REPLACEME -Music REFRESH Refresh music tree 8 REPLACEME -Music NEXTTRACK Move to the next track >,.,Z,End REPLACEME -Music FILTER Filter All My Music F REPLACEME -Music THMBDOWN Decrease rating 7 REPLACEME diff --git a/abs/core-testing/live-installer/templates/settings/default_2/settings.txt b/abs/core-testing/live-installer/templates/settings/default_2/settings.txt deleted file mode 100644 index 106be04..0000000 --- a/abs/core-testing/live-installer/templates/settings/default_2/settings.txt +++ /dev/null @@ -1,320 +0,0 @@ -value data hostname -AC3PassThru 0 REPLACEME -AggressiveSoundcardBuffer 0 REPLACEME -AllowQuitShutdown 3 REPLACEME -AltClearSavedPosition 1 REPLACEME -AspectOverride 0 REPLACEME -AudioNag 1 REPLACEME -AudioOutputDevice /dev/dsp REPLACEME -AutoCommercialSkip 2 REPLACEME -AutoLookupCD 1 REPLACEME -AutomaticSetWatched 0 REPLACEME -AutoPlayCD 0 REPLACEME -BackendServerPort 6543 REPLACEME -BackendStatusPort 6544 REPLACEME -CCBackground 0 REPLACEME -CDBlankType fast REPLACEME -CDCreateDir 1 REPLACEME -CDDevice /dev/cdrom REPLACEME -CDDiskSize 1 REPLACEME -CDWriterEnabled 0 REPLACEME -CDWriteSpeed 0 REPLACEME -ChannelFormat REPLACEME -ChannelOrdering channum REPLACEME -chanPerPage 5 REPLACEME -ClearSavedPosition 1 REPLACEME -CommNotifyAmount 0 REPLACEME -CommRewindAmount 0 REPLACEME -CustomFilters REPLACEME -DateFormat ddd MMM d REPLACEME -DecodeExtraAudio 1 REPLACEME -Default MythVideo View 1 REPLACEME -DefaultCCMode 0 REPLACEME -DefaultRipQuality 0 REPLACEME -DefaultTVChannel 3 REPLACEME -Deinterlace 1 REPLACEME -DeinterlaceFilter kerneldeint REPLACEME -DisplayGroupDefaultView 0 REPLACEME -DisplayGroupTitleSort 0 REPLACEME -DisplayRecGroup Default REPLACEME -DispRecGroupAsAllProg 0 REPLACEME -DTSPassThru 0 REPLACEME -DVDDeviceLocation /dev/dvd REPLACEME -DVDOnInsertDVD 1 REPLACEME -DVDRipLocation /data/media/tmp REPLACEME -EjectCDAfterRipping 1 REPLACEME -EnableMHEG 0 REPLACEME -EnableXbox 0 REPLACEME -EnableXbox 0 REPLACEME -EncoderType ogg REPLACEME -EndOfRecordingExitPrompt 1 REPLACEME -EPGFillType 10 REPLACEME -EPGScrollType 1 REPLACEME -EPGShowCategoryColors 1 REPLACEME -EPGShowCategoryText 1 REPLACEME -EPGShowChannelIcon 1 REPLACEME -EPGShowFavorites 0 REPLACEME -ExactSeeking 0 REPLACEME -FFRewReposTime 100 REPLACEME -FFRewReverse 1 REPLACEME -FilenameTemplate ARTIST/ALBUM/TRACK-TITLE REPLACEME -GalleryDir /data/media/images REPLACEME -GalleryImportDirs /mnt/cdrom:/mnt/camera REPLACEME -GalleryMoviePlayerCmd mplayer -fs %s REPLACEME -GalleryOverlayCaption 0 REPLACEME -GalleryRecursiveSlideshow 1 REPLACEME -GallerySortOrder 20 REPLACEME -GalleryThumbnailLocation 1 REPLACEME -GameAllTreeLevels system gamename REPLACEME -GameFavTreeLevels gamename REPLACEME -GeneratePreviewPixmaps 0 REPLACEME -GuiHeight 0 REPLACEME -GuiOffsetX 0 REPLACEME -GuiOffsetY 0 REPLACEME -GuiSizeForTV 0 REPLACEME -GuiVidModeResolution 640x480 REPLACEME -GuiWidth 0 REPLACEME -HaltCommand halt REPLACEME -HideMouseCursor 1 REPLACEME -HorizScanPercentage 0 REPLACEME -Ignore_ID3 0 REPLACEME -IndividualMuteControl 0 REPLACEME -IntelliLastPlayWeight 25 REPLACEME -IntelliPlayCountWeight 25 REPLACEME -IntelliRandomWeight 15 REPLACEME -IntelliRatingWeight 35 REPLACEME -ISO639Language0 eng REPLACEME -ISO639Language1 eng REPLACEME -JobAllowCommFlag 1 REPLACEME -JobAllowTranscode 1 REPLACEME -JobQueueCheckFrequency 60 REPLACEME -JobQueueCPU 0 REPLACEME -JobQueueMaxSimultaneousJobs 1 REPLACEME -JobQueueWindowEnd 23:59 REPLACEME -JobQueueWindowStart 00:00 REPLACEME -KeyboardAccelerators 1 REPLACEME -Language EN REPLACEME -LastMusicPlaylistPush 0 REPLACEME -LCDBacklightOn 1 REPLACEME -LCDBigClock 0 REPLACEME -LCDEnable 0 REPLACEME -LCDHeartBeatOn 0 REPLACEME -LCDKeyString ABCDEF REPLACEME -LCDPopupTime 5 REPLACEME -LCDShowChannel 1 REPLACEME -LCDShowGeneric 1 REPLACEME -LCDShowMenu 1 REPLACEME -LCDShowMusic 1 REPLACEME -LCDShowMusicItems ArtistTitle REPLACEME -LCDShowRecStatus 0 REPLACEME -LCDShowTime 1 REPLACEME -LCDShowVolume 1 REPLACEME -LircKeyPressedApp REPLACEME -ListAsShuffled 0 REPLACEME -LiveTVInAllPrograms 0 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanDays 14 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanEnabled 0 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanMax 30 REPLACEME -LogCleanPeriod 14 REPLACEME -LogCleanPeriod 14 REPLACEME -LogMaxCount 100 REPLACEME -LogMaxCount 100 REPLACEME -LogPrintLevel 8 REPLACEME -LogPrintLevel 8 REPLACEME -LongChannelFormat REPLACEME -MasterMixerVolume 70 REPLACEME -MenuTheme STB-menu REPLACEME -MixerControl PCM REPLACEME -MixerDevice /dev/mixer REPLACEME -MonitorDrives 0 REPLACEME -MovieDataCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -D REPLACEME -MovieListCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -M tv=no;video=no REPLACEME -MoviePosterCommandLine /usr/local/share/mythtv/mythvideo/scripts/imdb.pl -P REPLACEME -Mp3UseVBR 0 REPLACEME -MTDac3Flag 0 REPLACEME -MTDConcurrentTranscodes 1 REPLACEME -MTDLogFlag 0 REPLACEME -MTDNiceLevel 20 REPLACEME -MTDPort 2442 REPLACEME -MTDRipSize 0 REPLACEME -MTDxvidFlag 1 REPLACEME -MusicAudioDevice default REPLACEME -MusicLocation /data/media/audio REPLACEME -MusicShowRatings 0 REPLACEME -MythArchiveAlwaysUseMythTranscode 1 REPLACEME -MythArchiveChapterMenuAR Video REPLACEME -MythArchiveCopyRemoteFiles 1 REPLACEME -MythArchiveDateFormat %a %b %d REPLACEME -MythArchiveDvdauthorCmd dvdauthor REPLACEME -MythArchiveDVDLocation /dev/dvd REPLACEME -MythArchiveEncodeToAc3 1 REPLACEME -MythArchiveFfmpegCmd ffmpeg REPLACEME -MythArchiveFileFilter *.mpg *.mov *.avi *.mpeg *.nuv REPLACEME -MythArchiveGrowisofsCmd growisofs REPLACEME -MythArchiveMainMenuAR 16:9 REPLACEME -MythArchiveMkisofsCmd mkisofs REPLACEME -MythArchiveMpeg2encCmd mpeg2enc REPLACEME -MythArchiveMplexCmd mplex REPLACEME -MythArchivePng2yuvCmd png2yuv REPLACEME -MythArchiveShareDir /usr/local/share/mythtv/mytharchive/ REPLACEME -MythArchiveSpumuxCmd spumux REPLACEME -MythArchiveTcrequantCmd tcrequant REPLACEME -MythArchiveTempDir /data/media/tmp REPLACEME -MythArchiveTimeFormat %I:%M %p REPLACEME -MythArchiveUseFIFO 1 REPLACEME -MythArchiveVideoFormat NTSC REPLACEME -MythControlsVolume 1 REPLACEME -mythdvd.DVDPlayerCommand Internal REPLACEME -mythvideo.db_folder_view 1 REPLACEME -mythvideo.ImageCacheSize 50 REPLACEME -mythvideo.sort_ignores_case 1 REPLACEME -NetworkControlEnabled 1 REPLACEME -NetworkControlPort 6546 REPLACEME -NonID3FileNameFormat GENRE/ARTIST/ALBUM/TRACK_TITLE REPLACEME -NoPromptOnExit 0 REPLACEME -NoWhitespace 0 REPLACEME -OnlyImportNewMusic 0 REPLACEME -OSDCC708CapitalsFont FreeMono.ttf REPLACEME -OSDCC708CapitalsItalicFont FreeMono.ttf REPLACEME -OSDCC708CasualFont FreeMono.ttf REPLACEME -OSDCC708CasualItalicFont FreeMono.ttf REPLACEME -OSDCC708CursiveFont FreeMono.ttf REPLACEME -OSDCC708CursiveItalicFont FreeMono.ttf REPLACEME -OSDCC708DefaultFontType MonoSerif REPLACEME -OSDCC708MonoSansSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifFont FreeMono.ttf REPLACEME -OSDCC708MonoSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSansSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708PropSerifFont FreeMono.ttf REPLACEME -OSDCC708PropSerifItalicFont FreeMono.ttf REPLACEME -OSDCC708TextZoom 100 REPLACEME -OSDCCFont FreeMono.ttf REPLACEME -OSDFont FreeMono.ttf REPLACEME -OSDGeneralTimeout 2 REPLACEME -OSDNotifyTimeout 6 REPLACEME -OSDProgramInfoTimeout 3 REPLACEME -OSDTheme Gray-OSD REPLACEME -OSDThemeFontSizeType default REPLACEME -ParanoiaLevel Full REPLACEME -PassThruOutputDevice Default REPLACEME -PCMMixerVolume 70 REPLACEME -PersistentBrowseMode 1 REPLACEME -PIPLocation 0 REPLACEME -PlaybackBoxStartInTitle 1 REPLACEME -PlaybackExitPrompt 2 REPLACEME -PlaybackPreview 1 REPLACEME -PlaybackPreviewLowCPU 1 REPLACEME -PlayBoxEpisodeSort Date REPLACEME -PlayBoxOrdering 1 REPLACEME -PlayBoxShading 0 REPLACEME -PlayBoxTransparency 1 REPLACEME -PlayMode none REPLACEME -PostCDRipScript REPLACEME -PreferredMPEG2Decoder ffmpeg REPLACEME -PreviewFromBookmark 1 REPLACEME -PVR350EPGAlphaValue 164 REPLACEME -PVR350InternalAudioOnly 0 REPLACEME -PVR350OutputEnable 0 REPLACEME -PVR350VideoDev /dev/video16 REPLACEME -QtFontBig 25 REPLACEME -QtFontMedium 16 REPLACEME -QtFontSmall 12 REPLACEME -QueryInitialFilter 0 REPLACEME -RandomTheme 0 REPLACEME -RealtimePriority 1 REPLACEME -RecordFilePrefix /data/media/video/recordings REPLACEME -RememberRecGroup 1 REPLACEME -RepeatMode all REPLACEME -RunFrontendInWindow 0 REPLACEME -SelChangeRecThreshold 16 REPLACEME -SelectChangesChannel 1 REPLACEME -ServiceMythWEB 0 REPLACEME -ServiceNFS 0 REPLACEME -ServiceSamba 0 REPLACEME -SetupPinCodeRequired 0 REPLACEME -ShortDateFormat M/d REPLACEME -ShowGroupInfo 0 REPLACEME -ShowWholeTree 1 REPLACEME -SlideshowBackground REPLACEME -SlideshowDelay 5 REPLACEME -SlideshowOpenGLTransition none REPLACEME -SlideshowOpenGLTransitionLength 2000 REPLACEME -SlideshowTransition none REPLACEME -SmartChannelChange 0 REPLACEME -SmartForward 0 REPLACEME -StickyKeys 1 REPLACEME -Style REPLACEME -SubTitleCommand -sid %s REPLACEME -TagSeparator - REPLACEME -Theme basic-blue REPLACEME -ThemeFontSizeType default REPLACEME -ThemePainter qt REPLACEME -TimeFormat h:mm AP REPLACEME -timePerPage 4 REPLACEME -TitlePlayCommand mplayer dvd://%t -dvd-device %d -fs -zoom -vo xv -aid %a -channels %c REPLACEME -TranscodeCommand transcode REPLACEME -TreeLevels splitartist artist album title REPLACEME -TVVidModeForceAspect 0.0 REPLACEME -TVVidModeForceAspect0 0.0 REPLACEME -TVVidModeForceAspect1 0.0 REPLACEME -TVVidModeForceAspect2 0.0 REPLACEME -TVVidModeRefreshRate 0 REPLACEME -TVVidModeRefreshRate0 0 REPLACEME -TVVidModeRefreshRate1 0 REPLACEME -TVVidModeRefreshRate2 0 REPLACEME -TVVidModeResolution 640x480 REPLACEME -TVVidModeResolution0 640x480 REPLACEME -TVVidModeResolution1 640x480 REPLACEME -TVVidModeResolution2 640x480 REPLACEME -UDPNotifyPort 6948 REPLACEME -UnknownCategory Unknown REPLACEME -UnknownTitle Unknown REPLACEME -upnp:UDN:urn:schemas-upnp-org:device:MediaServer:1 dee5b0fe-7087-4960-8794-428d3e01a61f REPLACEME -UseArrowAccels 1 REPLACEME -UseDHCP 1 REPLACEME -UseOutputPictureControls 1 REPLACEME -UseVideoModes 0 REPLACEME -UseVideoTimebase 0 REPLACEME -UseVirtualKeyboard 1 REPLACEME -VCDDeviceLocation /dev/cdrom REPLACEME -VCDPlayerCommand mplayer vcd:// -cdrom-device %d -fs -zoom -vo xv REPLACEME -VertScanPercentage 0 REPLACEME -VideoAggressivePC 0 REPLACEME -VideoArtworkDir /data/media/images/posters REPLACEME -VideoBrowserNoDB 0 REPLACEME -VideoDefaultParentalLevel 4 REPLACEME -VideoGalleryAspectRatio 1 REPLACEME -VideoGalleryColsPerPage 4 REPLACEME -VideoGalleryNoDB 0 REPLACEME -VideoGalleryRowsPerPage 3 REPLACEME -VideoGallerySubtitle 1 REPLACEME -VideoDefaultPlayer /usr/bin/playmedia.sh VIDEO %s REPLACEME -VideoListUnknownFiletypes 1 REPLACEME -VideoNewBrowsable 1 REPLACEME -VideoStartupDir /data/media/video/movies REPLACEME -VideoTreeLoadMetaData 1 REPLACEME -VideoTreeNoDB 0 REPLACEME -VidModeHeight0 0 REPLACEME -VidModeHeight1 0 REPLACEME -VidModeHeight2 0 REPLACEME -VidModeWidth0 0 REPLACEME -VidModeWidth1 0 REPLACEME -VidModeWidth2 0 REPLACEME -VisualCycleOnSongChange 0 REPLACEME -VisualMode Random REPLACEME -VisualModeDelay 0 REPLACEME -VisualScaleHeight 1 REPLACEME -VisualScaleWidth 1 REPLACEME -WatchTVGuide 0 REPLACEME -WebBrowserCommand /usr/local/bin/mythbrowser REPLACEME -WebBrowserHideScrollbars 0 REPLACEME -WebBrowserScrollMode 1 REPLACEME -WebBrowserScrollSpeed 4 REPLACEME -WebBrowserZoomLevel 20 REPLACEME -XScanDisplacement 0 REPLACEME -YScanDisplacement 0 REPLACEME diff --git a/abs/core-testing/live-installer/templates/sources/mv-core b/abs/core-testing/live-installer/templates/sources/mv-core deleted file mode 100644 index f9f6c97..0000000 --- a/abs/core-testing/live-installer/templates/sources/mv-core +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core diff --git a/abs/core-testing/live-installer/templates/sources/mv-core-testing b/abs/core-testing/live-installer/templates/sources/mv-core-testing deleted file mode 100644 index 1fce6ea..0000000 --- a/abs/core-testing/live-installer/templates/sources/mv-core-testing +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-core-testing diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra b/abs/core-testing/live-installer/templates/sources/mv-extra deleted file mode 100644 index e13640f..0000000 --- a/abs/core-testing/live-installer/templates/sources/mv-extra +++ /dev/null @@ -1,2 +0,0 @@ -#Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra diff --git a/abs/core-testing/live-installer/templates/sources/mv-extra-testing b/abs/core-testing/live-installer/templates/sources/mv-extra-testing deleted file mode 100644 index c176add..0000000 --- a/abs/core-testing/live-installer/templates/sources/mv-extra-testing +++ /dev/null @@ -1,2 +0,0 @@ -##Begin official list of mirrors -Server = http://www.mythvantage.com/repo/mv-extra-testing diff --git a/abs/core-testing/live-installer/templates/sources/svc_pkg b/abs/core-testing/live-installer/templates/sources/svc_pkg deleted file mode 100644 index c1efdcc..0000000 --- a/abs/core-testing/live-installer/templates/sources/svc_pkg +++ /dev/null @@ -1,3 +0,0 @@ -[svc_pkg] -Server = http://REPLACEME/repo/mirror/svc_pkg/os/i686 - diff --git a/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf b/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf deleted file mode 100755 index 51db997..0000000 --- a/abs/core-testing/live-installer/templates/transmit/Time_Warner_SA3250/lircd.conf +++ /dev/null @@ -1,413 +0,0 @@ -# - -begin remote - - name Time_Warner_SA3250 - flags CONST_LENGTH|RAW_CODES - eps 30 - aeps 100 - - ptrail 0 - repeat 0 0 - gap 100240 - frequency 57600 - - begin raw_codes - - name MUTE - 972 802 971 802 1887 778 - 971 798 971 798 972 798 - 971 798 972 798 971 1677 - 972 802 1887 1656 992 - - name POWER - 3450 3229 894 2468 891 2468 - 893 778 892 2468 891 2469 - 917 2444 891 2468 892 2469 - 891 779 892 778 918 752 - 917 754 917 752 892 2471 - 889 779 892 779 892 777 - 892 779 892 777 868 2492 - 892 2469 891 2470 890 - - name GUIDE - 3397 3285 890 2470 840 2519 - 916 755 891 2470 839 2520 - 891 780 891 2474 860 2495 - 892 778 917 754 890 780 - 891 781 864 804 917 2443 - 865 805 891 779 866 2495 - 864 805 892 779 891 2469 - 865 2495 891 2469 866 - - - name INFO - 3449 3231 918 2441 920 2440 - 920 750 947 2414 920 2440 - 920 750 894 777 919 750 - 947 2413 921 750 919 750 - 920 751 919 752 918 2441 - 921 749 895 776 919 2441 - 920 2440 920 2441 920 749 - 921 2439 921 2440 921 - - name UP - 3396 3285 915 2444 919 2442 - 918 752 916 2444 919 2441 - 919 751 916 2445 919 751 - 890 780 916 753 917 754 - 942 729 889 780 916 2445 - 919 751 915 756 914 2448 - 916 752 916 2444 918 2442 - 919 2441 918 2443 918 - - name DOWN - 3421 3261 890 2470 918 2442 - 919 751 916 2446 917 2441 - 919 2442 918 2442 918 752 - 916 2444 919 751 890 780 - 916 755 915 755 915 2445 - 919 753 914 755 889 781 - 889 781 916 2444 919 752 - 889 2471 919 2441 918 - - name LEFT - 3427 3255 918 2441 924 2437 - 920 750 918 2442 920 2441 - 919 2440 921 2439 921 750 - 919 751 944 726 919 752 - 917 753 918 751 944 2417 - 920 750 893 777 919 751 - 919 752 918 2441 921 2440 - 920 2440 920 2440 921 - - name RIGHT - 3424 3258 892 2466 921 2439 - 896 774 920 2441 920 2440 - 920 750 920 751 945 2414 - 921 750 919 751 920 750 - 919 752 919 751 919 2440 - 921 750 918 752 918 2442 - 920 2440 921 749 918 2443 - 920 2440 920 2441 919 - - name SELECT - 3424 3257 944 2416 919 2442 - 919 750 918 2442 920 2441 - 919 751 943 727 918 2442 - 920 2440 920 752 916 752 - 969 702 917 753 892 2468 - 919 751 892 778 918 2442 - 924 2436 921 750 917 753 - 918 2443 919 2441 919 - - name SETTINGS - 3402 3278 871 2491 921 2438 - 921 749 922 2440 919 2441 - 919 2440 921 749 921 750 - 895 2465 920 2440 921 2440 - 920 749 896 775 921 2439 - 920 749 923 748 895 775 - 922 2439 920 2440 920 749 - 897 774 896 774 921 - - name EXIT - 3400 3279 896 2464 921 2439 - 921 750 895 2465 921 2439 - 921 749 898 772 896 2465 - 920 2440 920 750 920 2441 - 920 749 896 774 870 2491 - 921 749 921 749 895 2465 - 921 2440 920 749 922 748 - 897 2464 920 750 896 - - name PGUP - 3425 3255 920 2440 920 2440 - 921 749 895 2466 920 2440 - 920 749 920 2441 896 2464 - 921 749 919 2445 917 2440 - 920 750 920 750 920 2441 - 921 748 921 749 920 2440 - 921 750 919 752 919 2440 - 921 749 921 750 919 - - name PGDN - 3400 3281 921 2438 921 2441 - 920 749 895 2465 896 2465 - 920 2440 920 2440 920 2440 - 921 749 896 2465 895 2465 - 920 750 895 775 920 2440 - 921 749 921 750 895 775 - 896 774 896 774 921 2439 - 921 749 921 751 894 - - name VOLUP - 995 778 1886 779 994 775 - 995 777 993 774 996 774 - 995 775 995 1654 1885 778 - 995 775 995 774 995 - - name VOLDN - 996 778 971 802 1862 803 - 970 799 996 774 995 774 - 996 774 995 1654 1886 778 - 996 773 971 1678 991 - - name CHUP - 3421 3259 916 2444 918 2443 - 918 751 917 2444 919 2441 - 919 2441 919 751 916 2444 - 919 2441 919 2443 918 751 - 941 729 916 755 917 2442 - 919 752 916 754 891 778 - 918 2444 918 751 916 754 - 917 753 916 2445 919 - - name CHDN - 3421 3260 915 2445 918 2442 - 919 751 891 2469 919 2441 - 927 745 915 2444 919 2441 - 919 2441 919 2442 918 752 - 915 755 890 780 917 2443 - 919 752 916 754 915 2445 - 919 751 915 755 890 781 - 914 756 916 2445 917 - - name A - 3425 3258 916 2442 920 2441 - 919 751 918 2442 919 2441 - 920 2440 920 2441 919 2441 - 919 2441 920 750 917 2443 - 920 751 917 752 919 2442 - 920 750 918 753 917 753 - 917 753 942 728 917 753 - 918 2442 920 750 942 - - name B - 3398 3283 916 2443 892 2470 - 892 778 892 2468 891 2475 - 886 779 916 754 892 777 - 892 778 919 2442 891 2468 - 918 753 892 778 891 2469 - 892 778 892 778 918 2443 - 891 2469 892 2467 893 2469 - 891 778 918 753 892 - - name C - 3396 3283 891 2469 892 2468 - 892 778 917 2444 892 2468 - 892 2469 891 778 892 779 - 893 777 892 2468 892 2468 - 918 752 893 777 892 2469 - 892 778 892 778 867 802 - 918 2444 917 2442 868 2492 - 893 778 892 779 916 - - name 1 - 3424 3257 890 2470 865 2495 - 891 780 892 2468 865 2495 - 892 777 891 780 892 779 - 890 780 916 2444 865 805 - 891 779 917 753 916 2445 - 865 805 916 754 892 2469 - 865 2494 916 2445 865 2495 - 891 779 917 2443 866 - - name 2 - 3422 3258 916 2444 865 2496 - 889 782 915 2444 865 2495 - 917 2444 839 830 891 780 - 915 755 890 2470 864 806 - 917 753 891 780 866 2495 - 864 805 891 779 892 779 - 865 2494 865 2496 891 2469 - 865 805 891 2469 865 - - name 3 - 3397 3284 916 2443 892 2468 - 892 779 893 2467 892 2468 - 917 753 892 2469 891 778 - 893 778 891 2469 892 778 - 918 753 890 779 893 2468 - 891 779 893 778 891 2469 - 892 777 893 2468 891 2468 - 917 754 943 2417 892 - - name 4 - 3421 3261 890 2470 839 2520 - 917 753 891 2470 865 2495 - 917 2443 865 2495 890 781 - 891 778 891 2470 865 804 - 895 776 892 779 891 2468 - 866 805 917 753 943 727 - 866 805 889 2471 865 2494 - 892 780 916 2444 865 - - name 5 - 3396 3282 920 2441 892 2467 - 894 778 891 2468 892 2469 - 891 780 866 802 893 2470 - 890 779 918 2443 891 777 - 892 779 918 752 892 2468 - 892 779 918 752 918 2443 - 891 2469 891 779 891 2469 - 892 778 891 2468 893 - - name 6 - 3396 3284 918 2442 866 2494 - 892 778 917 2444 866 2494 - 917 2444 865 804 893 2468 - 890 780 916 2445 890 779 - 892 779 891 778 918 2443 - 891 778 892 779 892 779 - 891 2468 892 778 919 2444 - 889 778 893 2468 891 - - name 7 - 3398 3282 893 2467 892 2468 - 893 779 891 2469 891 2468 - 919 752 892 2467 892 2469 - 891 779 892 2468 892 777 - 893 778 918 752 892 2468 - 893 779 916 753 918 2442 - 892 779 891 778 893 2468 - 892 778 893 2467 892 - - name 8 - 3448 3232 892 2468 866 2494 - 892 779 892 2467 867 2494 - 891 2469 866 2495 891 2469 - 865 805 968 2394 864 804 - 918 753 891 779 892 2468 - 866 804 917 754 891 780 - 916 752 917 754 892 2469 - 865 804 893 2468 890 - - name 9 - 3422 3258 891 2469 839 2521 - 891 780 892 2468 824 2536 - 916 754 916 755 891 779 - 866 2494 839 2522 891 778 - 892 778 890 781 915 2448 - 837 831 891 779 890 2470 - 837 2523 942 2418 838 832 - 892 778 890 2471 839 - - name 0 - 3398 3284 891 2469 890 2469 - 893 779 891 2468 892 2468 - 892 2468 892 778 892 779 - 891 2469 892 2468 893 778 - 892 777 893 777 893 2469 - 891 778 892 779 868 802 - 917 2443 892 2469 890 779 - 891 779 892 2468 893 - - name LAST - 3422 3258 891 2471 916 2443 - 891 780 891 2469 272 3088 - 865 805 916 2445 308 3052 - 890 2469 892 779 915 756 - 889 781 889 780 890 2471 - 890 779 889 781 891 2471 - 272 1397 890 779 891 781 - 890 2469 448 2912 917 - - name FAV - 3423 3257 918 2442 944 2417 - 917 753 892 2469 890 2471 - 324 3036 890 2469 379 289 - 167 2525 891 2470 379 2981 - 890 780 378 270 242 781 - 866 806 889 2469 786 884 - 891 779 891 779 892 779 - 916 754 890 779 892 778 - 891 2470 839 - - name REW - 3420 3258 916 2445 326 3033 - 891 780 916 2443 891 2469 - 916 2445 838 831 918 754 - 890 2471 837 832 916 2444 - 838 832 891 779 916 2445 - 838 831 892 779 890 780 - 892 2469 839 2520 891 780 - 915 2444 836 836 890 - - name PLAY - 3448 3233 916 2444 891 2469 - 917 753 892 2468 918 2443 - 941 2420 891 2468 917 754 - 915 755 914 2446 918 2443 - 916 754 916 753 945 2416 - 943 727 941 729 918 752 - 917 753 919 2442 916 2444 - 915 755 943 728 916 - - name FF - 3420 3259 917 2442 946 2415 - 918 752 916 2445 918 2441 - 943 728 917 753 942 728 - 892 2470 864 806 889 2471 - 865 805 918 752 916 2443 - 944 726 892 779 891 2470 - 891 2469 915 2445 917 753 - 890 2471 222 1447 891 - - name PAUSE - 3421 3259 891 2470 787 2573 - 890 780 916 2444 840 2520 - 892 2468 864 806 917 2444 - 839 831 890 780 891 779 - 891 780 891 779 889 2471 - 839 831 916 755 915 754 - 892 2469 839 830 917 2444 - 840 2521 891 2469 840 - - name STOP - 3398 3284 889 2471 325 3036 - 891 779 890 2470 395 290 - 140 2535 889 781 890 781 - 889 2470 274 1397 891 2470 - 272 3087 917 754 890 780 - 889 2472 293 1377 890 779 - 916 2444 448 2913 916 754 - 866 2495 325 1344 891 779 - 915 - - name REC - 3421 3258 917 2444 916 2444 - 942 729 942 2420 889 2469 - 992 2367 942 730 891 2468 - 917 754 916 2443 892 2470 - 892 777 916 754 892 2467 - 943 730 916 754 891 779 - 917 2442 917 754 943 2417 - 918 753 915 754 892 - - name BYPASS - 3450 3231 891 2470 890 2470 - 917 753 916 2447 913 2445 - 273 3088 889 780 890 2470 - 891 2469 916 755 890 780 - 942 727 918 752 916 2444 - 890 782 916 754 865 805 - 891 2469 891 780 889 781 - 891 2468 259 3102 866 - - name TV/VCR - 19945 3915 612 1873 560 1926 - 560 1925 561 931 560 931 - 587 905 559 931 563 931 - 557 932 561 1925 585 908 - 583 1901 559 931 586 905 - 585 907 610 1875 561 1924 - 561 1926 559 1926 535 1951 - 559 1925 586 907 585 1899 - 560 931 1048 7898 3707 3862 - 587 1899 586 1899 586 1900 - 559 932 586 908 323 - - end raw_codes - - end remote diff --git a/abs/core-testing/live-installer/templates/xine.config.template b/abs/core-testing/live-installer/templates/xine.config.template deleted file mode 100644 index 966487f..0000000 --- a/abs/core-testing/live-installer/templates/xine.config.template +++ /dev/null @@ -1,754 +0,0 @@ -# -# xine config file -# -.version:2 - -# Entries which are still set to their default values are commented out. -# Remove the '#' at the beginning of the line, if you want to change them. - -# Enable deinterlacing by default -# bool, default: 0 -#gui.deinterlace_by_default:0 - -# Configuration experience level -# { Beginner Advanced Expert Master of the known universe }, default: 0 -gui.experience_level:Expert - -# Enable OSD support -# bool, default: 1 -#gui.osd_enabled:1 - -# Dismiss OSD time (s) -# numeric, default: 3 -#gui.osd_timeout:3 - -# Ask user for playback with unsupported codec -# bool, default: 0 -#gui.play_anyway:0 - -# Automatically reload old playlist -# bool, default: 0 -#gui.playlist_auto_reload:0 - -# Audio visualization plugin -# { oscope fftscope fftgraph goom }, default: 0 -gui.post_audio_plugin:fftgraph - -# gui skin theme -# { Antares Centori KeramicRH8 cloudy xinetic }, default: 4 -gui.skin:KeramicRH8 - -# Change xine's behavior for unexperienced user -# bool, default: 1 -#gui.smart_mode:1 - -# Snapshot location -# string, default: /home/jams -#gui.snapshotdir:/home/jams - -# Display splash screen -# bool, default: 1 -gui.splash:0 - -# Subtitle autoloading -# bool, default: 1 -#gui.subtitle_autoload:1 - -# Visual animation style -# { None Post Plugin Stream Animation }, default: 1 -#gui.visual_anim:Post Plugin - -# Windows stacking (more) -# bool, default: 0 -#gui.always_layer_above:0 - -# Audio mixer control method -# { Sound card Software }, default: 0 -#gui.audio_mixer_method:Sound card - -# Visiblility behavior of panel -# bool, default: 0 -#gui.auto_panel_visibility:0 - -# Visibility behavior of output window -# bool, default: 0 -#gui.auto_video_output_visibility:0 - -# Deinterlace plugin. -# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 -#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 - -# Event sender behavior -# bool, default: 1 -#gui.eventer_sticky:1 - -# Windows stacking -# bool, default: 0 -#gui.layer_above:0 - -# Use unscaled OSD -# bool, default: 1 -gui.osd_use_unscaled:0 - -# Screensaver reset interval (s) -# numeric, default: 10 -#gui.screensaver_timeout:10 - -# Menu shortcut style -# { Windows style Emacs style }, default: 0 -#gui.shortcut_style:Windows style - -# Stream information -# bool, default: 0 -#gui.sinfo_auto_update:0 - -# Skin Server Url -# string, default: http://xine.sourceforge.net/skins/skins.slx -#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx - -# Chapter hopping -# bool, default: 1 -#gui.skip_by_chapter:1 - -# New stream sizes resize output window -# bool, default: 1 -#gui.stream_resize_window:1 - -# Tips timeout (ms) -# numeric, default: 5000 -#gui.tips_timeout:5000 - -# gui tips visibility -# bool, default: 1 -#gui.tips_visible:1 - -# Name of video display -# string, default: -#gui.video_display: - -# Synchronized X protocol (debug) -# bool, default: 0 -#gui.xsynchronize:0 - -# Double size for small streams (require stream_resize_window) -# bool, default: 0 -#gui.zoom_small_stream:0 - -# Logo mrl -# string, default: file:/usr/share/xine/skins/xine-ui_logo.mpv -#gui.logo_mrl:file:/usr/share/xine/skins/xine-ui_logo.mpv - -# use XVidModeExtension when switching to fullscreen -# bool, default: 0 -#gui.use_xvidext:0 - -# height for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_height:-8192 - -# width for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_width:-8192 - -# x coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_x:-8192 - -# y coordinate for xinerama fullscreen (-8192 = autodetect) -# numeric, default: -8192 -#gui.xinerama_fullscreen_y:-8192 - -# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3) -# string, default: 0 1 -#gui.xinerama_use_screens:0 1 - -# Amplification level -# [0..200], default: 100 -#gui.amp_level:100 - -# gui panel visibility -# bool, default: 1 -gui.panel_visible:0 - -# numeric, default: 200 -gui.panel_x:21 - -# numeric, default: 100 -gui.panel_y:1050 - -gui.control_x:186 - -gui.control_y:46 - -gui.dropped_frames_warning:0 - -gui.eventer_x:1041 - -gui.eventer_y:781 - -gui.mrl_browser_x:23 - -gui.mrl_browser_y:9 - -gui.setup_x:717 - -gui.setup_y:227 - -gui.viewlog_x:200 - -gui.viewlog_y:210 - -# color specification yuv-opacity -# string, default: 8080c0-f -#gui.osdmenu.color_focused_button:8080c0-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_slider:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_slider_knob:ff8080-f - -# color specification yuv-opacity -# string, default: 808080-f -#gui.osdmenu.color_focused_text_border:808080-f - -# color specification yuv-opacity -# string, default: ff8080-f -#gui.osdmenu.color_focused_text_foreground:ff8080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_border:0080c0-f - -# color specification yuv-opacity -# string, default: c08080-f -#gui.osdmenu.color_label_foreground:c08080-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_label_window:0080c0-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_slider:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_slider_knob:ffff00-f - -# color specification yuv-opacity -# string, default: 008000-f -#gui.osdmenu.color_text_border:008000-f - -# color specification yuv-opacity -# string, default: ffff00-f -#gui.osdmenu.color_text_foreground:ffff00-f - -# color specification yuv-opacity -# string, default: 0080c0-f -#gui.osdmenu.color_text_window:0080c0-f - -# directory a media in dvd device will be mounted -# string, default: /dvd -#gui.osdmenu.dvd_mountpoint:/dvd - -# palette (foreground-border-background) to use for subtitles and OSD -# { white-black-transparent white-none-transparent white-none-translucid yellow-black-transparent }, default: 0 -#ui.osd.text_palette:white-black-transparent - -# audio driver to use -# { auto null alsa oss esd file none }, default: 0 -audio.driver:oss - -# a/v sync method to use by OSS -# { auto getodelay getoptr softsync probebuffer }, default: 0 -#audio.oss_sync_method:auto - -# use A/52 dynamic range compression -# bool, default: 0 -#audio.a52.dynamic_range:0 - -# downmix audio to 2 channel surround stereo -# bool, default: 0 -#audio.a52.surround_downmix:0 - -# A/52 volume -# [0..200], default: 100 -#audio.a52.level:100 - -# OSS audio device name -# { auto /dev/dsp /dev/sound/dsp }, default: 0 -#audio.device.oss_device_name:auto - -# OSS audio device number, -1 for none -# numeric, default: -1 -#audio.device.oss_device_number:-1 - -# OSS audio mixer number, -1 for none -# numeric, default: -1 -#audio.device.oss_mixer_number:-1 - -audio.device.alsa_front_device:default - -# speaker arrangement -# { Mono 1.0 Stereo 2.0 Headphones 2.0 Stereo 2.1 Surround 3.0 Surround 4.0 Surround 4.1 Surround 5.0 Surround 5.1 Surround 6.0 Surround 6.1 Surround 7.1 Pass Through }, default: 1 -#audio.output.speaker_arrangement:Stereo 2.0 - -# offset for digital passthrough -# numeric, default: 0 -#audio.synchronization.passthrough_offset:0 - -# play audio even on slow/fast speeds -# bool, default: 0 -#audio.synchronization.slow_fast_audio:0 - -# method to sync audio and video -# { metronom feedback resample }, default: 0 -#audio.synchronization.av_sync_method:metronom feedback - -# always resample to this rate (0 to disable) -# numeric, default: 0 -#audio.synchronization.force_rate:0 - -# enable resampling -# { auto off on }, default: 0 -#audio.synchronization.resample_mode:auto - -# startup audio volume -# [0..100], default: 50 -#audio.volume.mixer_volume:50 - -# restore volume level at startup -# bool, default: 0 -#audio.volume.remember_volume:0 - -# video driver to use -# { auto aadxr3 dxr3 xv opengl SyncFB xshm none xxmc sdl vidixfb vidix fb xvmc }, default: 0 -#video.driver:auto - -# pitch alignment workaround -# bool, default: 0 -#video.device.xv_pitch_alignment:0 - -# disable exact alpha blending of overlays -# bool, default: 0 -#video.output.disable_exact_alphablend:0 - -# disable all video scaling -# bool, default: 0 -#video.output.disable_scaling:0 - -# horizontal image position in the output window -# [0..100], default: 50 -#video.output.horizontal_position:50 - -# vertical image position in the output window -# [0..100], default: 50 -#video.output.vertical_position:50 - -# deinterlace method (deprecated) -# { none bob weave greedy onefield onefield_xv linearblend }, default: 4 -video.output.xv_deinterlace_method:linearblend - -# MPEG-4 postprocessing quality -# [0..6], default: 3 -#video.processing.ffmpeg_pp_quality:3 - -# DXR3 device number -# numeric, default: 0 -#dxr3.device_number:0 - -# swap odd and even lines -# bool, default: 0 -#dxr3.encoding.swap_fields:0 - -# add black bars to correct aspect ratio -# bool, default: 1 -#dxr3.encoding.add_bars:1 - -# use smooth play mode for mpeg encoder playback -# bool, default: 1 -#dxr3.encoding.alt_play_mode:1 - -# device used for CD audio -# string, default: /dev/cdrom -#media.audio_cd.device:/dev/cdrom - -# slow down disc drive to this speed factor -# numeric, default: 4 -#media.audio_cd.drive_slowdown:4 - -# query CDDB -# bool, default: 1 -#media.audio_cd.use_cddb:1 - -# CDDB cache directory -# string, default: /home/jams/.xine/cddbcache -#media.audio_cd.cddb_cachedir:/home/jams/.xine/cddbcache - -# CDDB server port -# numeric, default: 8880 -#media.audio_cd.cddb_port:8880 - -# CDDB server name -# string, default: freedb.freedb.org -#media.audio_cd.cddb_server:freedb.freedb.org - -# directory for saving streams -# string, default: -#media.capture.save_dir: - -# Number of dvb card to use. -# numeric, default: 0 -#media.dvb.adapter:0 - -# Remember last DVB channel watched -# bool, default: 1 -#media.dvb.remember_channel:1 - -# Last DVB channel viewed -# numeric, default: -1 -#media.dvb.last_channel:-1 - -# default language for DVD playback -# string, default: en -#media.dvd.language:en - -# region the DVD player claims to be in (1 to 8) -# numeric, default: 1 -#media.dvd.region:1 - -# device used for DVD playback -# string, default: /dev/dvd -#media.dvd.device:/dev/dvd - -# raw device set up for DVD access -# string, default: /dev/rdvd -#media.dvd.raw_device:/dev/rdvd - -# read-ahead caching -# bool, default: 1 -#media.dvd.readahead:1 - -# CSS decryption method -# { key disc title }, default: 0 -#media.dvd.css_decryption_method:key - -# play mode when title/chapter is given -# { entire dvd one chapter }, default: 0 -#media.dvd.play_single_chapter:entire dvd - -# unit for seeking -# { seek in program chain seek in program }, default: 0 -#media.dvd.seek_behaviour:seek in program chain - -# unit for the skip action -# { skip program skip part skip title }, default: 0 -#media.dvd.skip_behaviour:skip program - -# path to the title key cache -# string, default: /home/jams/.dvdcss/ -#media.dvd.css_cache_path:/home/jams/.dvdcss/ - -# file browsing start location -# string, default: /home/jams -#media.files.origin_path:/home/jams - -# list hidden files -# bool, default: 0 -#media.files.show_hidden_files:0 - -# network bandwidth -# { 14.4 Kbps (Modem) 19.2 Kbps (Modem) 28.8 Kbps (Modem) 33.6 Kbps (Modem) 34.4 Kbps (Modem) 57.6 Kbps (Modem) 115.2 Kbps (ISDN) 262.2 Kbps (Cable/DSL) 393.2 Kbps (Cable/DSL) 524.3 Kbps (Cable/DSL) 1.5 Mbps (T1) 10.5 Mbps (LAN) }, default: 10 -#media.network.bandwidth:1.5 Mbps (T1) - -# Timeout for network stream reading (in seconds) -# numeric, default: 30 -#media.network.timeout:30 - -# Domains for which to ignore the HTTP proxy -# string, default: -#media.network.http_no_proxy: - -# HTTP proxy host -# string, default: -#media.network.http_proxy_host: - -# HTTP proxy password -# string, default: -#media.network.http_proxy_password: - -# HTTP proxy port -# numeric, default: 80 -#media.network.http_proxy_port:80 - -# HTTP proxy username -# string, default: -#media.network.http_proxy_user: - -# MMS protocol -# { auto TCP HTTP }, default: 0 -#media.network.mms_protocol:auto - -# automatically advance VCD track/entry -# bool, default: 1 -#media.vcd.autoadvance:1 - -# VCD default type to use on autoplay -# { MPEG track entry segment playback-control item }, default: 3 -#media.vcd.autoplay:playback-control item - -# CD-ROM drive used for VCD when none given -# string, default: -#media.vcd.device: - -# VCD position slider range -# { auto track entry }, default: 0 -#media.vcd.length_reporting:auto - -# show 'rejected' VCD LIDs -# bool, default: 0 -#media.vcd.show_rejected:0 - -# VCD format string for stream comment field -# string, default: %P - Track %T -#media.vcd.comment_format:%P - Track %T - -# VCD debug flag mask -# numeric, default: 0 -#media.vcd.debug:0 - -# VCD format string for display banner -# string, default: %F - %I %N%L%S, disk %c of %C - %v %A -#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A - -# v4l radio device -# string, default: /dev/v4l/radio0 -#media.video4linux.radio_device:/dev/v4l/radio0 - -# v4l video device -# string, default: /dev/v4l/video0 -#media.video4linux.video_device:/dev/v4l/video0 - -# device used for WinTV-PVR 250/350 (pvr plugin) -# string, default: /dev/video0 -#media.wintv_pvr.device:/dev/video0 - -# path to RealPlayer codecs -# string, default: /usr/lib/win32 -#decoder.external.real_codecs_path:/usr/lib/win32 - -# path to Win32 codecs -# string, default: /usr/lib/win32 -#decoder.external.win32_codecs_path:/usr/lib/win32 - -# subtitle size -# { tiny small normal large very large huge }, default: 1 -#subtitles.separate.subtitle_size:small - -# subtitle vertical offset -# numeric, default: 0 -#subtitles.separate.vertical_offset:0 - -# font for subtitles -# string, default: sans -#subtitles.separate.font:sans - -# encoding of the subtitles -# string, default: iso-8859-1 -#subtitles.separate.src_encoding:iso-8859-1 - -# use unscaled OSD if possible -# bool, default: 1 -#subtitles.separate.use_unscaled_osd:1 - -# default duration of subtitle display in seconds -# numeric, default: 4 -#subtitles.separate.timeout:4 - -# frames per second to generate -# numeric, default: 14 -#effects.goom.fps:14 - -# goom image height -# numeric, default: 240 -#effects.goom.height:240 - -# goom image width -# numeric, default: 320 -#effects.goom.width:320 - -# colorspace conversion method -# { Fast but not photorealistic Slow but looks better }, default: 0 -#effects.goom.csc_method:Fast but not photorealistic - -# number of audio buffers -# numeric, default: 230 -#engine.buffers.audio_num_buffers:230 - -# number of video buffers -# numeric, default: 500 -#engine.buffers.video_num_buffers:500 - -# default number of video frames -# numeric, default: 15 -#engine.buffers.video_num_frames:15 - -# priority for a/52 decoder -# numeric, default: 0 -#engine.decoder_priorities.a/52:0 - -# priority for bitplane decoder -# numeric, default: 0 -#engine.decoder_priorities.bitplane:0 - -# priority for dts decoder -# numeric, default: 0 -#engine.decoder_priorities.dts:0 - -# priority for dvaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.dvaudio:0 - -# priority for dxr3-mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-mpeg2:0 - -# priority for dxr3-spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.dxr3-spudec:0 - -# priority for faad decoder -# numeric, default: 0 -#engine.decoder_priorities.faad:0 - -# priority for ffmpeg-wmv8 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv8:0 - -# priority for ffmpeg-wmv9 decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpeg-wmv9:0 - -# priority for ffmpegaudio decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegaudio:0 - -# priority for ffmpegvideo decoder -# numeric, default: 0 -#engine.decoder_priorities.ffmpegvideo:0 - -# priority for gdkpixbuf decoder -# numeric, default: 0 -#engine.decoder_priorities.gdkpixbuf:0 - -# priority for gsm610 decoder -# numeric, default: 0 -#engine.decoder_priorities.gsm610:0 - -# priority for image decoder -# numeric, default: 0 -#engine.decoder_priorities.image:0 - -# priority for mad decoder -# numeric, default: 0 -#engine.decoder_priorities.mad:0 - -# priority for mpc decoder -# numeric, default: 0 -#engine.decoder_priorities.mpc:0 - -# priority for mpeg2 decoder -# numeric, default: 0 -#engine.decoder_priorities.mpeg2:0 - -# priority for nsf decoder -# numeric, default: 0 -#engine.decoder_priorities.nsf:0 - -# priority for pcm decoder -# numeric, default: 0 -#engine.decoder_priorities.pcm:0 - -# priority for qta decoder -# numeric, default: 0 -#engine.decoder_priorities.qta:0 - -# priority for qtv decoder -# numeric, default: 0 -#engine.decoder_priorities.qtv:0 - -# priority for real decoder -# numeric, default: 0 -#engine.decoder_priorities.real:0 - -# priority for realadec decoder -# numeric, default: 0 -#engine.decoder_priorities.realadec:0 - -# priority for rgb decoder -# numeric, default: 0 -#engine.decoder_priorities.rgb:0 - -# priority for spucc decoder -# numeric, default: 0 -#engine.decoder_priorities.spucc:0 - -# priority for spucmml decoder -# numeric, default: 0 -#engine.decoder_priorities.spucmml:0 - -# priority for spudec decoder -# numeric, default: 0 -#engine.decoder_priorities.spudec:0 - -# priority for spudvb decoder -# numeric, default: 0 -#engine.decoder_priorities.spudvb:0 - -# priority for sputext decoder -# numeric, default: 0 -#engine.decoder_priorities.sputext:0 - -# priority for theora decoder -# numeric, default: 0 -#engine.decoder_priorities.theora:0 - -# priority for vorbis decoder -# numeric, default: 0 -#engine.decoder_priorities.vorbis:0 - -# priority for win32a decoder -# numeric, default: 0 -#engine.decoder_priorities.win32a:0 - -# priority for win32v decoder -# numeric, default: 0 -#engine.decoder_priorities.win32v:0 - -# priority for yuv decoder -# numeric, default: 0 -#engine.decoder_priorities.yuv:0 - -# media format detection strategy -# { default reverse content extension }, default: 0 -#engine.demux.strategy:default - -# memcopy method used by xine -# { probe libc kernel mmx mmxext sse }, default: 0 -engine.performance.memcpy_method:libc - -# percentage of discarded frames to tolerate -# numeric, default: 10 -#engine.performance.warn_discarded_threshold:10 - -# percentage of skipped frames to tolerate -# numeric, default: 10 -#engine.performance.warn_skipped_threshold:10 - -# allow implicit changes to the configuration (e.g. by MRL) -# bool, default: 0 -#misc.implicit_config:0 - diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.ATSC b/abs/core-testing/live-installer/templates/xorg/modeline.ATSC deleted file mode 100644 index b2cd709..0000000 --- a/abs/core-testing/live-installer/templates/xorg/modeline.ATSC +++ /dev/null @@ -1,33 +0,0 @@ -ModeLine "ATSC-720p60Hz" 74.160 1280 1352 1392 1648 720 725 730 750 - -ModeLine "My480p" 28.6 720 744 768 900 480 484 492 525 - -ModeLine "My540p" 37.26 960 976 1008 1104 540 542 548 563 +hsync +vsync - -ModeLine "My720p" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My720p2" 73.825 1280 1320 1368 1640 720 722 724 751 +hsync +vsync 74.086 MHz 44.955 kHz 5$ - -ModeLine "My1080i" 79.84 1920 2040 2200 2368 1080 1090 1106 1125 +vsync -hsync interlace - -ModeLine "My1080i2" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -hsync -vsync interlace - -Modeline "My1920x1080_i" 74.52 1920 1952 2016 2208 1080 1084 1096 1126 -HSync -VSync Interlace - -Modeline "in1080_i" 74.52 1760 1888 2096 2208 960 1012 1028 1126 -HSync -VSync Interlace - -Modeline "1920x1080_59i" 76.11 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_60i" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 interlace - -Modeline "1920x1080_61i" 79.08 1920 1952 2248 2280 1080 1104 1110 1135 interlace - -Modeline "1776x1000_60i" 65.91 1776 1808 2056 2088 1000 1023 1028 1051 interlace - -Modeline "1920x1080_30" 77.60 1920 1952 2240 2272 1080 1104 1110 1135 - -Modeline "1760x960_60i" 62.39 1760 1792 2024 2056 960 982 987 1009 interlace - -Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - -Modeline "1280x720_50.00" 74.25 1280 1360 1400 1984 720 725 730 750 -hsync -vsync diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.DVD b/abs/core-testing/live-installer/templates/xorg/modeline.DVD deleted file mode 100644 index 9e846d0..0000000 --- a/abs/core-testing/live-installer/templates/xorg/modeline.DVD +++ /dev/null @@ -1,9 +0,0 @@ -#DVD-NativeModes -ModeLine "NTSC-DVD-59.94i" 13.5 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-60i" 13.514 720 736 800 858 480 484 492 525 Interlace -ModeLine "NTSC-DVD-59.94p" 27.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-60p" 27.027 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-71.93p" 32.4 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-119.88p" 54.0 720 736 800 858 480 484 492 525 -ModeLine "NTSC-DVD-120p" 54.054 720 736 800 858 480 484 492 525 diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.NTSC b/abs/core-testing/live-installer/templates/xorg/modeline.NTSC deleted file mode 100644 index 5536c1b..0000000 --- a/abs/core-testing/live-installer/templates/xorg/modeline.NTSC +++ /dev/null @@ -1,10 +0,0 @@ -#Analog-RegularModes -ModeLine "NTSCspec-59.94i" 14.318 768 784 848 910 483 484 492 525 Interlace -ModeLine "NTSCspec-59.94p" 28.636 768 784 848 910 483 484 492 525 -ModeLine "Laserdisk-59.94i" 567 583 647 684 483 484 492 525 Interlace -ModeLine "Laserdisk-59.94p" 567 583 647 684 483 484 492 525 -ModeLine "Broadcast-59.94i" 483 484 492 525 Interlace -ModeLine "Broadcast-59.94p" 483 484 492 525 -ModeLine "VHS-59.94i" 483 484 492 525 Interlace -ModeLine "VHS-59.94p" 483 484 492 525 - diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.VESA b/abs/core-testing/live-installer/templates/xorg/modeline.VESA deleted file mode 100644 index a026f64..0000000 --- a/abs/core-testing/live-installer/templates/xorg/modeline.VESA +++ /dev/null @@ -1,163 +0,0 @@ -# 640x350 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync - -# 640x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync - -# 720x400 @ 85Hz (VESA) hsync: 37.9kHz -ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync - -# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz -ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync - -# 640x480 @ 72Hz (VESA) hsync: 37.9kHz -ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync - -# 640x480 @ 75Hz (VESA) hsync: 37.5kHz -ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync - -# 640x480 @ 85Hz (VESA) hsync: 43.3kHz -ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync - -# 800x600 @ 56Hz (VESA) hsync: 35.2kHz -ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync - -# 800x600 @ 60Hz (VESA) hsync: 37.9kHz -ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync - -# 800x600 @ 72Hz (VESA) hsync: 48.1kHz -ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync - -# 800x600 @ 75Hz (VESA) hsync: 46.9kHz -ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync - -# 800x600 @ 85Hz (VESA) hsync: 53.7kHz -ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync - -# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz -ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace - -# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz -ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync - -# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz -ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync - -# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz -ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync - -# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz -ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync - -# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz -ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync - -# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz -ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync - -# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz -ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync - -# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz -ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz -ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync - -# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz -ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync - -# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz -ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync -# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz -ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz -ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz -ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz -ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync - -# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz -ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync - -# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz -ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync - -# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz -ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync - -# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync - -# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz -ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync - -# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz -ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync - -# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz -ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync - -# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz -ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync - -# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz -ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync - -# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz -ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync - -# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz -ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync - -# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz -ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync - -# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz -ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync - -# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz -ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync - -# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz -ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync - -# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz -ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync - -# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz -ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync - -# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz -ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync - -# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz -ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync - -# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz -ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync - -# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz -ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync - -# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz -ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync - -# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz -ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync - -# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz -ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync - -# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz -ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync - -# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz -ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync - -# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz -ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync diff --git a/abs/core-testing/live-installer/templates/xorg/modeline.custom b/abs/core-testing/live-installer/templates/xorg/modeline.custom deleted file mode 100644 index ca6d678..0000000 --- a/abs/core-testing/live-installer/templates/xorg/modeline.custom +++ /dev/null @@ -1 +0,0 @@ -ModeLine "CustomModeline" 14.318 768 784 848 910 483 484 492 525 Interlace diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati b/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati deleted file mode 100644 index c6d9249..0000000 --- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.ati +++ /dev/null @@ -1,94 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "aticonfig-Screen[0]" 0 0 - InputDevice "Mouse0" "CorePointer" - InputDevice "Keyboard0" "CoreKeyboard" -EndSection - -Section "Files" - RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/TTF" - FontPath "/usr/share/fonts/Type1" -EndSection - -Section "Module" - Load "xtrap" - Load "dbe" - Load "record" - Load "extmod" - Load "dri" - Load "type1" - Load "freetype" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "kbd" -EndSection - -Section "InputDevice" - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/input/mice" - Option "ZAxisMapping" "4 5 6 7" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Monitor Vendor" - ModelName "Monitor Model" -EndSection - -Section "Monitor" - Identifier "aticonfig-Monitor[0]" -# HorizSync -# VertRefresh - Option "VendorName" "ATI Proprietary Driver" - Option "ModelName" "Generic Autodetecting Monitor" - Option "DPMS" "true" -EndSection - -Section "Device" - - ### Available Driver options are:- - ### Values: : integer, : float, : "True"/"False", - ### : "String", : " Hz/kHz/MHz" - ### [arg]: arg optional - #Option "ShadowFB" # [] - #Option "DefaultRefresh" # [] - #Option "ModeSetClearScreen" # [] - Identifier "Card0" - Driver "vesa" - VendorName "ATI Technologies Inc" - BoardName "RV370 5B60 [Radeon X300 (PCIE)]" - BusID "PCI:1:0:0" -EndSection - -Section "Device" - Identifier "aticonfig-Device[0]" - Driver "fglrx" -#INSERT HERE - -# Option "ForceMonitors" "tv,nocrt1,notmds1" -# Option "TVStandard" "SCART" -# Option "TVFormat" "PAL-B" -EndSection - - -Section "Screen" - Identifier "aticonfig-Screen[0]" - Device "aticonfig-Device[0]" - Monitor "aticonfig-Monitor[0]" - DefaultDepth 24 - SubSection "Display" - Viewport 0 0 - Depth 24 - Modes "640x480" - EndSubSection -EndSection - diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel b/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel deleted file mode 100644 index a4d258a..0000000 --- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.intel +++ /dev/null @@ -1,148 +0,0 @@ -Section "ServerLayout" - Identifier "Xorg Configured" - Screen 0 "Screen0" 0 0 - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "PS/2 Mouse" "CorePointer" -# Serial Mouse not detected -# USB Mouse not detected -EndSection - -Section "ServerFlags" - Option "AllowMouseOpenFail" "true" - -EndSection - -Section "Files" - RgbPath "/usr/share/X11/rgb" - ModulePath "/usr/lib/xorg/modules" - FontPath "/usr/share/fonts/misc:unscaled" - FontPath "/usr/share/fonts/misc" - FontPath "/usr/share/fonts/75dpi:unscaled" - FontPath "/usr/share/fonts/75dpi" - FontPath "/usr/share/fonts/100dpi:unscaled" - FontPath "/usr/share/fonts/100dpi" - FontPath "/usr/share/fonts/PEX" -# Additional fonts: Locale, Gimp, TTF... - FontPath "/usr/share/fonts/cyrillic" -# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" -# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" -# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! - FontPath "/usr/share/fonts/Type1" - FontPath "/usr/share/fonts/ttf/western" - FontPath "/usr/share/fonts/ttf/decoratives" - FontPath "/usr/share/fonts/truetype" - FontPath "/usr/share/fonts/truetype/openoffice" - FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" - FontPath "/usr/share/fonts/latex-ttf-fonts" - FontPath "/usr/share/fonts/defoma/CID" - FontPath "/usr/share/fonts/defoma/TrueType" -EndSection - -Section "Module" - Load "ddc" # ddc probing of monitor - Load "dbe" - Load "dri" - Load "extmod" - Load "glx" - Load "bitmap" # bitmap-fonts - Load "type1" - Load "freetype" - Load "record" -EndSection - -Section "InputDevice" - Identifier "Keyboard0" - Driver "keyboard" - Option "CoreKeyboard" - Option "XkbRules" "xorg" - Option "XkbModel" "pc105" - Option "XkbLayout" "" - Option "XkbVariant" "" -EndSection - -Section "InputDevice" - Identifier "Serial Mouse" - Driver "mouse" - Option "Protocol" "Microsoft" - Option "Device" "/dev/ttyS0" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "PS/2 Mouse" - Driver "mouse" - Option "Protocol" "auto" - Option "ZAxisMapping" "4 5" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "true" - Option "Emulate3Timeout" "70" - Option "SendCoreEvents" "true" -EndSection - -Section "InputDevice" - Identifier "USB Mouse" - Driver "mouse" - Option "Device" "/dev/input/mice" - Option "SendCoreEvents" "true" - Option "Protocol" "IMPS/2" - Option "ZAxisMapping" "4 5" - Option "Buttons" "5" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Monitor" - Identifier "Monitor0" - Option "DPMS" "true" -EndSection - -# Auto-generated by Archie mkxcfg - -Section "Device" - Identifier "Card0" - Driver "intel" - VendorName "All" - BoardName "All" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultColorDepth 16 - SubSection "Display" - Depth 1 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 4 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 8 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 15 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 16 - Modes "800x600" - virtual 800 600 - EndSubSection - SubSection "Display" - Depth 24 - Modes "1024x768" "800x600" "640x480" - EndSubSection - SubSection "Display" - Depth 32 - Modes "1024x768" "800x600" "640x480" - EndSubSection -EndSection - -Section "DRI" - Mode 0666 -EndSection diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia b/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia deleted file mode 100755 index dec0f42..0000000 --- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.nvidia +++ /dev/null @@ -1,90 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" -# HorizSync -# VertRefresh - Option "DPMS" "false" - DisplaySize 203 153 - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -#INSERT MODELINE -EndSection - -Section "Device" - Identifier "Device0" - Driver "nvidia" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - Option "NoLogo" "1" - -#INSERT HERE - -#END OPTIONS - -# Option "ConnectedMonitor" "DFP" -# Option "FlatPanelProperties" "Scaling = centered, Dithering = enabled" -# Option "DigitalVibrance" "0" -# Option "TransparentIndex" "0" -# Option "CursorShadowAlpha" "64" -# Option "CursorShadowXOffset" "4" -# Option "UseEdidFreqs" "True" -# Option "NvAGP" "1" - - - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.via b/abs/core-testing/live-installer/templates/xorg/xorg.conf.via deleted file mode 100644 index 6dd7821..0000000 --- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.via +++ /dev/null @@ -1,77 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "glx" - Load "extmod" - Load "type1" - Load "freetype" - Load "dri" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "via" - VendorName "via" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Depth 16 - Modes "800x600" - EndSubSection -EndSection - -Section "DRI" - Group "video" - Mode 0666 - EndSection diff --git a/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware b/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware deleted file mode 100755 index 843f2f4..0000000 --- a/abs/core-testing/live-installer/templates/xorg/xorg.conf.vmware +++ /dev/null @@ -1,72 +0,0 @@ -# nvidia-xconfig: X configuration file generated by nvidia-xconfig -# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Aug 1 21:11:12 PDT 2006 - -Section "ServerLayout" - Identifier "Layout0" - Screen 0 "Screen0" - InputDevice "Keyboard0" "CoreKeyboard" - InputDevice "Mouse0" "CorePointer" -EndSection - -Section "Files" - RgbPath "/usr/X11R6/lib/X11/rgb" -EndSection - -Section "Module" - Load "dbe" - Load "extmod" - Load "type1" - Load "freetype" - Load "glx" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Mouse0" - Driver "mouse" - Option "Protocol" "auto" - Option "Device" "/dev/psaux" - Option "Emulate3Buttons" "no" - Option "ZAxisMapping" "4 5" -EndSection - -Section "InputDevice" - # generated from default - Identifier "Keyboard0" - Driver "keyboard" -EndSection - -Section "Monitor" - Identifier "Monitor0" - VendorName "Unknown" - ModelName "Unknown" - HorizSync 30.0 - 110.0 - VertRefresh 50.0 - 150.0 - Option "DPMS" "false" - Modeline "1280x720" 74.25 1280 1316 1452 1644 720 720 723 751 -hsync +vsync - Modeline "1280x720_60.00" 74.25 1280 1352 1432 1648 720 725 730 750 -hsync -vsync - ModeLine "848x480" 34.0 848 880 1016 1072 480 494 495 527 -hsync -vsync - Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync - ModeLine "NTSC-DVD-72p" 32.432 720 736 800 858 480 484 492 525 -EndSection - -Section "Device" - Identifier "Device0" - Driver "vmware" - VendorName "NVIDIA Corporation" - Option "DPI" "100 x 100" - - -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Device0" - Monitor "Monitor0" - DefaultDepth 24 - SubSection "Display" - Depth 24 - Modes "1280x720" - EndSubSection -EndSection - diff --git a/abs/core-testing/live-installer/timezip.py b/abs/core-testing/live-installer/timezip.py deleted file mode 100755 index 505b4a4..0000000 --- a/abs/core-testing/live-installer/timezip.py +++ /dev/null @@ -1,185 +0,0 @@ -#!/usr/bin/python -# import MySQL module -#used to import the zipcode/timezone/nfs info fromMBE -import MySQLdb -import sys -import getopt -import socket - - -def usage(): - print " -h --help" - print " -d --installdb" - print " -m --masterdb" - print " -n --hostname of current machine" - -def printvars(): - print "masterdb: " + masterdb - print "installdb:" + installdb - print "hostname: " + thishostname - print "BEhostname:" + BEhostname - print "zipcode:" + zipcode - print "timezone:" + tz - print "nfsip:" + nfsip - print "nfstoggle:" + nfstoggle - print "nfsmount:" + nfsmount - print "hobbitclient:" + hobbitclient -# connect -def selectvars(): - - global BEhostname - global zipcode - global tz - global nfsip - global nfstoggle - global nfsmount - global hobbitclient - - db = MySQLdb.connect(host=masterdb, user="mythtv", passwd="mythtv", db="mythconverg") - # create a cursor - cursor = db.cursor() - # execute SQL statement - cursor.execute("select hostname from settings where value='BackendServerIP' and data=(%s)",(masterdb)) - result = cursor.fetchone() - BEhostname=result[0] - - cursor.execute("select data from settings where value='HostZipcode' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - zipcode = result[0] - except TypeError: - zipcode="" - - cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfsip=result[0] - except TypeError: - nfsip="" - - cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfstoggle=result[0] - except TypeError: - nfstoggle="" - - cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - nfsmount=result[0] - except TypeError: - nfsmount="" - - cursor.execute("select data from settings where value='HostTimeZone' and hostname=(%s)",(BEhostname)) - result = cursor.fetchone() - try: - tz=result[0] - except TypeError: - tz="" - - if ( thishostname != BEhostname ): - cursor.execute("select data from settings where value='GlobalServiceHobbitserver'") - result = cursor.fetchone() - try: - hobbitclient=result[0] - except TypeError: - hobbitclient="0" - - - -def insertvars(): - - db = MySQLdb.connect(host=installdb, user="mythtv", passwd="mythtv", db="mythconverg") - cursor = db.cursor() -#inserting the zipcode - cursor.execute("select * from settings where value='HostZipcode' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( zipcode!="" ): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostZipcode',(%s),(%s))",(zipcode,thishostname)) - print "inserting zipcode" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostZipcode'",(zipcode,thishostname)) - print "updating zipcode" - -#inserting the timezone - cursor.execute("select * from settings where value='HostTimeZone' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( tz != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostTimeZone',(%s),(%s))",(tz,thishostname)) - print "inserting timezone" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostTimeZone'",(tz,thishostname)) - print "updating timezone" - - -#start of NFSIP - cursor.execute("select data from settings where value='HostCentralNFSIP' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( nfsip != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostCentralNFSIP',(%s),(%s))",(nfsip,thishostname)) - print "inserting nfsip" - - if (nfstoggle != ""): - cursor.execute("select data from settings where value='HostHaveCentralNFS' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostHaveCentralNFS',(%s),(%s))",(nfstoggle,thishostname)) - print "inserting nfstoggle" - - if ( nfsmount !="") : - cursor.execute("select data from settings where value='HostNFSmountpoint' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostNFSmountpoint',(%s),(%s))",(nfsmount,thishostname)) - print "inserting nfsmountpoint" - -#hobbitclient - cursor.execute("select * from settings where value='HostServiceHobbitclient' and hostname=(%s)",(thishostname)) - result = cursor.fetchone() - if ( tz != ""): - if (result == None): - cursor.execute("INSERT INTO settings (value,data,hostname) VALUES ('HostServiceHobbitclient',(%s),(%s))",(hobbitclient,thishostname)) - print "inserting hobbitcleint" - else: - cursor.execute("update settings set data=(%s) where hostname=(%s) and value='HostServiceHobbitclient'",(hobbitclient,thishostname)) - print "updating hobbitclient" - - -def main(argv): - global masterdb - global installdb - global thishostname - thishostname="" - global BEhostname - global zipcode - global tz - global nfsip - global hobbitclient - try: - opts, args = getopt.getopt(argv, "hm:d:n:", ["help", "masterdb=", "installdb=" , "hostname=" ] ) - except getopt.GetoptError: - sys.exit(2) - for opt, arg in opts: - if opt in ("-h", "--help"): - usage() - sys.exit() - elif opt in ( "-d" , "--installdb"): - installdb = arg - elif opt in ("-m", "--masterdb"): - masterdb = arg - elif opt in ("-n", "--hostname"): - thishostname = arg - - if ( thishostname == "" ): - thishostname = socket.gethostname() - - selectvars() - printvars() - insertvars() -if __name__ == "__main__": - main(sys.argv[1:]) - diff --git a/abs/core-testing/live-installer/timezone.bin b/abs/core-testing/live-installer/timezone.bin deleted file mode 100755 index a11d65a..0000000 Binary files a/abs/core-testing/live-installer/timezone.bin and /dev/null differ diff --git a/abs/core-testing/live-installer/xconfig.sh b/abs/core-testing/live-installer/xconfig.sh deleted file mode 100755 index 42603d6..0000000 --- a/abs/core-testing/live-installer/xconfig.sh +++ /dev/null @@ -1,233 +0,0 @@ -#!/bin/bash -BASE="" -. /etc/profile -#TEMPLATES="/usr/share/templates" - -function Xvalues { - VGACARDTYPE=`lspci|grep -i vga|sort -r|head -n 1| cut -d: -f3|cut -d" " -f 2` - echo $VGACARDTYPE - currentmode=`cat $BASE/etc/X11/xorg.conf |grep Modes|awk -Fs ' { print $2 } '` - } - -function presetupX { -if [ x$XUseAdvanced = x1 ] -then - if [ x$XIgnoreConfig = x1 ] - then - echo "Using User supplied X" - if [ -f $BASE/data/home/mythtv/templates/xorg.user ] - then - cp -f $BASE/data/home/mythtv/templates/xorg.user $XORG_CONF - else - echo "Didn't find the file" - echo "Copy your config file to $BASE/data/home/mythtv/templates/xorg.use " >> $XORG_CONF - fi - else - setupAdvancedX - fi -else - setupX -fi - -} - -function setupAdvancedX { -echo "#doing the advanced" > /tmp/options - Xcatagory=` echo $Xresadvanced |cut -d_ -f1` - Xres=` echo $Xresadvanced |cut -d_ -f2` - echo $Xcatagory - if [ x$Xcatagory = "xNvidia" ] - then - Xres="" - if [ $XnVidia1080p = "1" ] - then - Xres="${Xres} \"1920x1080_60\"" - fi - if [ $XnVidia1080i = "1" ] - then - Xres="${Xres} \"1920x1080_60i\"" - fi - if [ $XnVidia720p = "1" ] - then - Xres="${Xres} \"1280x720_60\"" - fi - if [ $XnVidia480p = "1" ] - then - Xres="${Xres} \"720x480_60\"" - fi - ML="\t Modes ${Xres}" - else - - ML="\t Modes \"${Xres}\"" - fi - echo $ML - case $Xcardtype in - NVIDIA|nVidia ) - - case $Xconnection in - DVI) ConnectedMonitor=DFP ;; - vga) ConnectedMonitor=CRT;; - Auto) ConnectedMonitor=Auto;; - TV) ConnectedMonitor=TV - echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options - echo "Option \"TVOutFormat\" \"$XTVconnection\"" >> /tmp/options - ;; - esac - if [ $ConnectedMonitor = Auto ] - then - echo "auto connection" - else - echo "Option \"ConnectedMonitor\" \"$ConnectedMonitor\"" >> /tmp/options - echo "Option \"FlatPanelProperties\" \"Scaling = centered, Dithering = enabled\"" >> /tmp/options - echo "Option \"DigitalVibrance\" \"0\"" >> /tmp/options - fi - - if [ x$XignoreEDID = x1 ] - then - EDIDvalue=true - EDIDFREQ=false - DS=" DisplaySize $XDisplaysize" - HS=" HorizSync $XHsync" - VR=" VertRefresh $XVrefresh" - else - EDIDvalue=false - EDIDFREQ=true - DS="# Display size edid used " - HS="#Hsync edid used " - VR="#Vertrefresh edid used " - - fi - echo "Option \"UseEdidFreqs\" \"$EDIDFREQ\"" >> /tmp/options - echo "Option \"IgnoreEDID\" \"$EDIDvalue\"" >> /tmp/options - - - sed -e "s/^.*Modes.*$/${ML}/" \ - -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ - -e "s/^.*DisplaySize.*$/ $DS/" \ - -e "s/^#.*HorizSync.*$/ $HS/g" \ - -e "s/^#.*VertRefresh.*$/ $VR/g" \ - -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF - - ;; - ati|ATI) - case $Xconnection in - DVI) ConnectedMonitor="tmds1,nocrt1,notv";; - VGA) ConnectedMonitor="crt1,notmds1,notv" ;; - TV) ConnectedMonitor="tv,nocrt1,notmds1" - echo "Option \"TVStandard\" \"$XTVstandard\"" >>/tmp/options - echo "Option \"TVFormat\" \"$XTVconnection\"" >> /tmp/options - ;; - - esac - - - if [ x$XignoreEDID = x1 ] - then - DS=" DisplaySize $XDisplaysize" - HS=" HorizSync $XHsync" - VR=" VertRefresh $XVrefresh" - else - DS="# Display size edid used " - HS="#Hsync edid used " - VR="#Vertrefresh edid used " - - fi - - echo "Option \"ForceMonitors\" \"$ConnectedMonitor\"" >> /tmp/options - - sed -e "s/^.*Modes.*$/\t $ML/" \ - -e "/INSERT MODELINE/r $TEMPLATES/xorg/modeline.$Xcatagory" \ - -e "s/^.*DisplaySize.*$/ $DS/" \ - -e "s/^#.*HorizSync.*$/ $HS/g" \ - -e "s/^#.*VertRefresh.*$/ $VR/g" \ - -e "/INSERT HERE/r /tmp/options" $TEMPLATES/xorg/xorg.conf.ati > $XORG_CONF - ;; - - via|VIA|Via) echo "no via here" - ;; - - *) - echo "unknown card type" - ;; - esac -} - - - -function setupX { - Xvalues - echo "$currentmode ____ ${Xres}" - #if [ ! x${currentmode} = x\"${Xres}\" ] - if [ x = x ] - then - case $VGACARDTYPE in - nVidia ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.nvidia > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -R libgl-dri -# pacman --noconfirm -S nvidia-STB nvidia-utils - pacman --noconfirm -S nvidia nvidia-utils - fi - ;; - VMware ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.vmware > $XORG_CONF - ;; - - VIA ) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.via > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -R nvidia-STB nvidia-utils - pacman --noconfirm -S libgl-dri - fi - - ;; - Intel) - sed -e "s/^.*Modes.*$/\t Modes \"${Xres}\"/" $TEMPLATES/xorg/xorg.conf.intel > $XORG_CONF - if [ ! x$TESTMODE = "xtest" ] - then - pacman --noconfirm -Rd nvidia-utils - pacman --noconfirm -S libgl-dri - fi - ;; - - *) #XCONF=`hwd -x |grep etc` - XCONF=`hwd -x |grep etc|tr -d [:cntrl:]|cut -d\/ -f 2-` - - - cat /$XCONF |grep -v Modes | sed -e '/Depth 16/a Modes "800x600"' -e 's/dev\/mouse/dev\/psaux/g'> $XORG_CONF - ;; - esac - fi - -} - -#MAIN -TESTMODE=$1 -if [ x$TESTMODE = "xtest" ] -then - XORG_CONF="/tmp/xorg.conf.test" - XUseAdvanced="1" - XIgnoreConfig="${2}" - Xcardtype="${3}" - XIgnoreEDID="${4}" - Xconnection="${5}" - XHsync="${6}" - XVrefresh="${7}" - Xresadvanced="${8}" - XTVstandard="${9}" - XTVconnection="${10}" - XDisplaysize="${11}" -else - if [ -f /etc/systemconfig ] - then - . /etc/systemconfig - else - Xres="800x600" - fi - XORG_CONF="/etc/X11/xorg.conf" -fi -presetupX - - -- cgit v0.12