From 3673d58e52b1df1d09fd64ef99934af1ecfcd214 Mon Sep 17 00:00:00 2001
From: Bob Igo <bob@stormlogic.com>
Date: Mon, 3 Aug 2009 14:27:55 -0400
Subject: Extracted sources for linhes-scripts so each script gets version
 control; PKGBUILD changed to reflect this; also changed # of lines used by
 shootscreens-mythtv.sh to fit on low res displays

---
 abs/core-testing/linhes-scripts/PKGBUILD           |   3 +-
 abs/core-testing/linhes-scripts/src/770-wrapper.sh |  37 ++++
 abs/core-testing/linhes-scripts/src/idle.sh        | 102 ++++++++++
 abs/core-testing/linhes-scripts/src/importfiles.sh |  18 ++
 .../linhes-scripts/src/limit-mythcommflag.sh       |  54 +++++
 .../linhes-scripts/src/linhes-scripts.tar.bz2      | Bin 0 -> 14933 bytes
 .../linhes-scripts/src/mplayer-resumer-vdpau.pl    | 204 +++++++++++++++++++
 .../linhes-scripts/src/mplayer-resumer.pl          | 188 +++++++++++++++++
 abs/core-testing/linhes-scripts/src/myth2mp3       |  82 ++++++++
 abs/core-testing/linhes-scripts/src/myth2x264      | 223 ++++++++++++++++++++
 abs/core-testing/linhes-scripts/src/myth2xvid      | 223 ++++++++++++++++++++
 .../linhes-scripts/src/mythwelcome-set-alarm.sh    |  23 +++
 .../linhes-scripts/src/mythwelcome-test-wakeup.sh  |  16 ++
 .../linhes-scripts/src/pause-mythcommflag.sh       |  53 +++++
 .../linhes-scripts/src/pause_mythcommflag          |   7 +
 .../linhes-scripts/src/run-limit-mythcommflag      |   2 +
 .../linhes-scripts/src/run-pause-mythcommflag      |   2 +
 .../linhes-scripts/src/screenshooter.sh            | 225 +++++++++++++++++++++
 .../linhes-scripts/src/shootscreens-mythtv.sh      |  11 +
 .../linhes-scripts/src/shootscreens.sh             |  37 ++++
 abs/core-testing/linhes-scripts/src/vdpau-detector | 103 ++++++++++
 21 files changed, 1611 insertions(+), 2 deletions(-)
 create mode 100755 abs/core-testing/linhes-scripts/src/770-wrapper.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/idle.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/importfiles.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh
 create mode 100644 abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2
 create mode 100755 abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl
 create mode 100755 abs/core-testing/linhes-scripts/src/mplayer-resumer.pl
 create mode 100755 abs/core-testing/linhes-scripts/src/myth2mp3
 create mode 100755 abs/core-testing/linhes-scripts/src/myth2x264
 create mode 100755 abs/core-testing/linhes-scripts/src/myth2xvid
 create mode 100755 abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/pause_mythcommflag
 create mode 100755 abs/core-testing/linhes-scripts/src/run-limit-mythcommflag
 create mode 100755 abs/core-testing/linhes-scripts/src/run-pause-mythcommflag
 create mode 100755 abs/core-testing/linhes-scripts/src/screenshooter.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/shootscreens.sh
 create mode 100755 abs/core-testing/linhes-scripts/src/vdpau-detector

diff --git a/abs/core-testing/linhes-scripts/PKGBUILD b/abs/core-testing/linhes-scripts/PKGBUILD
index 98a133c..01f4291 100644
--- a/abs/core-testing/linhes-scripts/PKGBUILD
+++ b/abs/core-testing/linhes-scripts/PKGBUILD
@@ -3,13 +3,12 @@
 
 pkgname=linhes-scripts
 pkgver=1
-pkgrel=17
+pkgrel=18
 pkgdesc="Various scripts that help to make LinHES, LinHES."
 arch=('i686' 'x86_64')
 license=('GPL2')
 depends=('xosd' 'cpulimit')
 url="http://linhes.org/"
-source=(ftp://ftp.knoppmyth.net/R6/sources/linhes-scripts.tar.bz2)
 
 build() {
   cd $startdir/src/
diff --git a/abs/core-testing/linhes-scripts/src/770-wrapper.sh b/abs/core-testing/linhes-scripts/src/770-wrapper.sh
new file mode 100755
index 0000000..65573f4
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/770-wrapper.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+# 770-wrapper.sh by Cecil Watsona
+# Modifed from
+# pdatranscode
+#
+# created by Jeff Volckaert (inspired by Zach White)
+# modified 01/16/06
+VIDEODIR=$1
+FILENAME=$2
+TITLE=$3
+# Remove non-alpha characters from TITLE
+TITLE=${TITLE//[^a-zA-Z0-9]/}
+STARTTIME=$4
+DIROUT=/myth/n770
+
+# Sanity checking, to make sure everything is in order.
+if [ -z "$VIDEODIR" -o -z "$FILENAME" ]; then
+       echo "Usage: $0 <VideoDirectory> <FileName> "<Title>" <Starttime>"
+       exit 5
+fi
+if [ ! -f $VIDEODIR/$FILENAME ]; then
+       echo "File does not exist: $VIDEODIR/$FILENAME"
+       exit 6
+fi
+
+# Transcode the file 
+
+
+perl /usr/local/bin/770-encode.pl -q -p mplayer $VIDEODIR/$FILENAME $DIROUT/$TITLE-$STARTTIME.avi
+
+chmod 664 $DIROUT/$TITLE-$STARTTIME.avi
+
+ERROR=$?
+if [ $ERROR -ne 0 ]; then
+       echo "Transcoding failed for ${FILENAME} with error $ERROR"
+       exit 3
+fi
diff --git a/abs/core-testing/linhes-scripts/src/idle.sh b/abs/core-testing/linhes-scripts/src/idle.sh
new file mode 100755
index 0000000..f95b9fa
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/idle.sh
@@ -0,0 +1,102 @@
+#!/bin/bash
+
+usage () {
+    echo "Usage: $0 [-h] [-s] [-t <minutes_needed>]"
+    echo
+    echo "-h - Print this help/usage message and quit"
+    echo "-s - Run silently (default is verbose)"
+    echo "-t - Minutes of idle time needed (default is 20)"
+    echo "-v - Be more verbose for debugging"
+    echo
+    echo "Silent mode is recommended for use in cron jobs or scripts."
+    exit $1
+}
+
+msg () {  # A status reporting function
+    [ "$VERBOSE" -ne 0 ] && echo "$*"
+}
+
+mysql_cmd () {
+    /usr/bin/mysql -u root mythconverg -sBe "$*"
+}
+
+# Command line argument handling
+VERBOSE=1
+TIME_BEFORE=20
+TIME_AFTER=5    # Only adjustable by editing here
+
+while getopts "hst:v" OPT ; do
+    case $OPT in
+    h) usage 0 ;;
+    s) VERBOSE=0 ;;
+    t) TIME_BEFORE=$OPTARG ;;
+    v) VERBOSE=2 ;;
+    *) usage 1 ;;
+    esac
+done
+# Check for extra cruft on the command line...
+shift $(($OPTIND - 1))
+[ -n "$*" ] && usage 1
+
+msg "Checking what MythTV is doing now or plans within $TIME_BEFORE minutes..."
+msg
+
+/usr/bin/mythshutdown -s 1
+BUSY="$?"
+msg "mythshutdown returned $BUSY"
+# Ignore certain non-zero flag values
+BUSY=$(($BUSY & 0x2F))
+
+SCHEMALOCK=$(mysql_cmd "select count(*) from schemalock")
+msg "schemalock $SCHEMALOCK"
+
+JOBS=$(mysql_cmd "select count(*) from jobqueue where status = 4")
+msg "running jobs $JOBS"
+
+INUSE=$(mysql_cmd "select count(*) from inuseprograms")
+msg "inuse programs $INUSE"
+
+POTENTIAL=$(mysql_cmd "select count(*) from recordmatch as rm, program as p
+  where rm.chanid = p.chanid and rm.starttime = p.starttime
+  and rm.starttime < now() + interval $TIME_BEFORE minute
+  and now() < p.endtime + interval $TIME_AFTER minute")
+msg "potential recordings $POTENTIAL"
+# See if any of the potential upcoming recordings are real.
+# This is ugly, but only the backend knows what programs it really
+# plans to record or ignore, so we can't just check the DB. :-(
+if [ "$VERBOSE" -ge 2 ] ; then
+    mysql_cmd "select p.starttime, p.endtime, p.title, subtitle
+      from recordmatch as rm, program as p
+      where rm.chanid = p.chanid and rm.starttime = p.starttime
+      and rm.starttime < now() + interval $TIME_BEFORE minute
+      and now() < p.endtime + interval $TIME_AFTER minute
+      order by p.starttime, p.endtime"
+fi
+UPCOMING=$(/usr/bin/mythbackend --printsched 2>&1 |
+  /bin/awk -v potential=$POTENTIAL '
+    BEGIN {item=-1;real=0}
+    /--- print list start ---/,/---  print list end  ---/ {
+        if (item>0 && item<=potential && substr($0,70,1) ~ "[0-9]") real+=1;
+        item += 1;
+    }
+    END {print real}
+')
+msg "planned recordings $UPCOMING"
+if [ "$VERBOSE" -ge 2 ] ; then
+    /usr/bin/mythbackend --printsched 2>&1 |
+      /bin/awk -v potential=$POTENTIAL '
+        BEGIN {item=-1}
+        /--- print list start ---/,/---  print list end  ---/ {
+            if (item>0 && item<=potential) print $0;
+            item += 1;
+        }'
+fi
+activities=$(($BUSY + $SCHEMALOCK + $JOBS + $INUSE + $UPCOMING))
+msg
+if [ "$activities" -eq 0 ] ; then
+    msg "System is idle"
+    exit 0
+else
+    msg "System is busy"
+    exit 1
+fi
diff --git a/abs/core-testing/linhes-scripts/src/importfiles.sh b/abs/core-testing/linhes-scripts/src/importfiles.sh
new file mode 100755
index 0000000..84f1ab5
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/importfiles.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
+
+DVD_or_CD=`cat /proc/mounts |grep iso9660|awk '{print $2}'|tail -1`
+if [ "$DVD_or_CD" != "" ]; then
+    echo "Copying files from $DVD_or_CD to /myth/video." > /tmp/screens
+    echo "This could take several minutes, depending on the" >> /tmp/screens
+    echo "speed and size of your optical media." >> /tmp/screens
+    cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=0 &
+    /bin/cp -R $DVD_or_CD/* /myth/video/
+    killall osd_cat
+    echo "Copied videos from $DVD_or_CD to /myth/video" > /tmp/screens
+    cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=2 &
+else
+    echo "No optical media found.  If you just inserted" > /tmp/screens
+    echo "your media, please wait a moment and try again." >> /tmp/screens
+    cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --color=yellow --delay=5 &
+fi
diff --git a/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh b/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh
new file mode 100755
index 0000000..8ca61c7
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/limit-mythcommflag.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# limit-mythcommflag.sh   v0.1  05/17/09
+# Utility to automatically limit mythcommflag if CPU usage is above a certain level.
+# Uses cpulimit from http://cpulimit.sourceforge.net/
+# Free for any use.
+# Installation:
+#  cp limit-mythcommflag.sh /usr/LH/bin
+#  chmod +x /usr/LH/bin/limit-mythcommflag.sh
+# Usage: Executed from runit limit-mythcommflag at boot
+
+# Threshold for when mythcommflag will be paused
+CPUTHRESHOLD=43
+
+# Limit mythcommflag to percentage
+LIMITCPU=20
+
+# Log file to write (use /dev/null for no log)
+#LOG=/var/log/mythtv/limit-mythcommflag.log
+LOG=/dev/null
+
+# Number of seconds to wait between checking for mythcommflag process
+SLEEP=5
+
+#sleep $SLEEP
+
+touch $LOG
+
+ALREADYLIMITED=0
+
+while true; do
+    PROCCOMMFLAG=`pidof mythcommflag`
+    if [ -n "${PROCCOMMFLAG}" ]
+    then
+        FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'`
+        if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD" ]
+        then
+            echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD%, LIMIT Commflagging" # >> $LOG
+            if [ $ALREADYLIMITED -eq 0 ]; then
+                cpulimit -e mythcommflag -l $LIMITCPU &
+		cpulimit_pid=$!
+                ALREADYLIMITED=1
+            fi
+        else
+            echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD%, UNLIMIT Commflagging" #>> $LOG
+            if [ $ALREADYLIMITED -eq 1 ]; then
+	        kill $cpulimit_pid
+                ALREADYLIMITED=0
+            fi
+        fi
+#    else
+#        echo "No COMMFLAG Process Active" >> $LOG
+    fi
+    sleep $SLEEP
+done
diff --git a/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2 b/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2
new file mode 100644
index 0000000..d9bd8e7
Binary files /dev/null and b/abs/core-testing/linhes-scripts/src/linhes-scripts.tar.bz2 differ
diff --git a/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl b/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl
new file mode 100755
index 0000000..9c82158
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mplayer-resumer-vdpau.pl
@@ -0,0 +1,204 @@
+#!/usr/bin/perl
+
+use Shell;
+use strict;
+use POSIX qw(floor);
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# CHANGE LOG:
+# 3/9/2009
+# Modded Bob's wonderful resumer script to work with the vdpau
+# options detector script someone anonymously posted to the wiki
+#
+#  http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo
+#
+# You need to have both this and the vdpau-detector script in the same
+# dir for this to work properly.  Also, change your default mplayer
+# options in mythfrontend to read simply: # mplayer-resumer-vdpau.pl %s
+#
+# To tweak the shell commands for mplayer, edit the vdpau-detector script.
+# It has a small README inside it as comments
+# ENJOY!
+
+# 5/3/2006
+# Added last time started checking.
+# If this script is restarted within $tdiff (default 5 seconds)
+# then it will delete the file used to keep track of the videos
+# resume position.
+
+# PURPOSE:
+# --------------------------
+# This is a wrapper script to prove the concept of having MythTV
+# resume playback of previously-stopped video where you left off.
+# It's likely that a good solution will look different than this
+# initial code.
+
+# RATIONALE:
+# --------------------------
+# Watching 90% of a video and stopping causes you to return to the
+# beginning again the next time you watch it.  Remembering where
+# you were in the video and resuming at that position is a much nicer
+# behavior for the user.
+#
+# By default, mplayer spits out timecode information that tells you
+# where you are in the video, to the tenth of a second.  Mplayer also
+# supports a seek feature on the command-line.  We can make use of these
+# features to write an mplayer wrapper that will remember the last
+# position in a video file and resume to it on playback.
+
+# PARAMETERS:
+# --------------------------
+# see print_usage() below
+
+# FILES:
+# --------------------------
+# $infile, the video to play
+# $resumefile, the video's resume file (see get_resume_filename() below)
+
+# KNOWN ISSUES:
+# --------------------------
+# Mplayer misreports the timecodes on .nuv MPEG-2 files.  Currently, anything
+# captured via an HDTV tuner card and put into your /myth/video directory
+# will fail with this resumer.
+#
+# Current theories include the timecode having to do with the show's broadcast
+# time, recording time, or perhaps its upload time to the station that
+# broadcast it.
+
+# DESIGN LIMITATION:
+# -------------------------
+# If the video file to be played is on a read-only filesystem, or otherwise
+# lives in a location that cannot be written to, resume will fail.  This is
+# because the current implementation uses a file parallel to the video file
+# to store the timecode.
+#
+
+my $infile;
+my $resumefile;
+my $mplayer_parameters;
+my $fudge_factor=2; # number of additional seconds to skip back before playback
+my $tnow;    # Time now.
+my $tprev;   # Time the prog was last started. 
+             # Returned from the modification time of the xx.resume file.
+my $tdiff=5; # How many seconds before we should start from 
+             # the beginning of the movie
+#DEBUG
+#open(DEBUG,">/tmp/debug") || die "unable to open debug file";
+
+sub init () {
+    $tnow = time();
+    $infile = @ARGV[$#ARGV];
+
+    $resumefile = &get_resume_filename($infile);
+    # This returns the 9th element of the 13 element array 
+    # created by the stat function.
+    $tprev = (stat ($resumefile))[9]; 
+    # if this file is restarted in less than 5 seconds then 
+    # remove the .resume file
+    if ( ($tnow - $tprev) < $tdiff ) {
+        unlink($resumefile);
+    }
+
+    $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]);
+}
+
+&init();
+&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile);
+
+#close(DEBUG);
+
+# For $pathname, return $path.$filename.resume
+sub get_resume_filename () {
+    my($pathname)=@_;
+    
+    my $idx = rindex($pathname,"/");
+
+    if ($idx == -1) { # There was no "/" in $pathname
+	return ".".$pathname.".resume";
+    } else {
+	# Now we need to split out the path from the filename.
+	my $path = substr($pathname,0,$idx+1);
+	my $filename = substr($pathname,$idx+1);
+	return "$path.$filename.resume";
+    }
+}
+
+# Calls mplayer and returns the last known video position
+sub mplayer () {
+    my($parameters,$infile)=@_;
+    my $seconds=0;
+    my $timecode=&get_time_offset($infile);
+    my $mplayeropts=`./vdpau-detector $infile`; chomp $mplayeropts;
+    my @lines = split "\n", $mplayeropts;
+    my $last_line = pop(@lines);
+    my $command = "mplayer $last_line $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |";
+
+    open(SHELL, $command);
+    # The kind of line we care about looks like this example:
+    # A:1215.2 V:1215.2 A-V:  0.006 ct:  0.210 207/201 13%  0%  1.9% 0 0 68%
+    # But all we care to look at is the first number.
+    
+    while (<SHELL>) {
+	#print DEBUG $_;
+	if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it
+	    my $last_timecode_line = &extract_last_timecode_line($_);
+	    if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) {
+		$seconds=$1;
+	    }
+	}
+    }
+    close(SHELL);
+
+    return $seconds;
+
+    sub extract_last_timecode_line () {
+	my ($line)=@_;
+	my @lines=split('A:',$line);
+	return @lines[$#lines-1];
+    }
+}
+
+# Save the last known video position
+sub save_time_offset () {
+    my($seconds, $resumefile)=@_;
+
+    open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing";
+    print RESUMEFILE "$seconds";
+    close(RESUMEFILE);
+}
+
+# returns the number of seconds corresponding to the last known video position,
+# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer
+sub get_time_offset () {
+    my($videofile)=@_;
+    my($resumefile) = &get_resume_filename($videofile);
+    my $seconds=0;
+    my $timecode;
+
+    open(RESUMEFILE, "<$resumefile") || return "00:00:00";
+    while(<RESUMEFILE>) {
+	$seconds=$_;
+    }
+    close(RESUMEFILE);
+
+    my $hours = floor($seconds/3600);
+    $seconds = $seconds - $hours*3600;
+
+    my $minutes = floor($seconds/60);
+    $seconds = int($seconds - $minutes*60) - $fudge_factor;
+
+    $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds;
+#    print "TIMECODE: $timecode\n";
+    return $timecode;
+}
+
+sub print_usage () {
+    print "USAGE:\n";
+    print "\t",$ARGV[0], "[mplayer parameters] video_file\n";
+    print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n";
+    print "\t","Version 3/9/2009\n";
+}
diff --git a/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl b/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl
new file mode 100755
index 0000000..c785a25
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mplayer-resumer.pl
@@ -0,0 +1,188 @@
+#!/usr/bin/perl
+
+use Shell;
+use strict;
+use POSIX qw(floor);
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# PURPOSE:
+# --------------------------
+# This is a wrapper script to prove the concept of having MythTV
+# resume playback of previously-stopped video where you left off.
+# It's likely that a good solution will look different than this
+# initial code.
+
+# RATIONALE:
+# --------------------------
+# Watching 90% of a video and stopping causes you to return to the
+# beginning again the next time you watch it.  Remembering where
+# you were in the video and resuming at that position is a much nicer
+# behavior for the user.
+#
+# By default, mplayer spits out timecode information that tells you
+# where you are in the video, to the tenth of a second.  Mplayer also
+# supports a seek feature on the command-line.  We can make use of these
+# features to write an mplayer wrapper that will remember the last
+# position in a video file and resume to it on playback.
+
+# PARAMETERS:
+# --------------------------
+# see print_usage() below
+
+# FILES:
+# --------------------------
+# $infile, the video to play
+# $resumefile, the video's resume file (see get_resume_filename() below)
+
+# KNOWN ISSUES:
+# --------------------------
+# Mplayer misreports the timecodes on .nuv MPEG-2 files.  Currently, anything
+# captured via an HDTV tuner card and put into your /myth/video directory
+# will fail with this resumer.
+#
+# Current theories include the timecode having to do with the show's broadcast
+# time, recording time, or perhaps its upload time to the station that
+# broadcast it.
+
+# DESIGN LIMITATION:
+# -------------------------
+# If the video file to be played is on a read-only filesystem, or otherwise
+# lives in a location that cannot be written to, resume will fail.  This is
+# because the current implementation uses a file parallel to the video file
+# to store the timecode.
+#
+
+# CHANGE LOG:
+# 5/3/2006
+# Added last time started checking.
+# If this script is restarted within $tdiff (default 5 seconds)
+# then it will delete the file used to keep track of the videos
+# resume position.
+
+
+my $infile;
+my $resumefile;
+my $mplayer_parameters;
+my $fudge_factor=2; # number of additional seconds to skip back before playback
+my $tnow;    # Time now.
+my $tprev;   # Time the prog was last started. 
+             # Returned from the modification time of the xx.resume file.
+my $tdiff=5; # How many seconds before we should start from 
+             # the beginning of the movie
+#DEBUG
+#open(DEBUG,">/tmp/debug") || die "unable to open debug file";
+
+sub init () {
+    $tnow = time();
+    $infile = @ARGV[$#ARGV];
+
+    $resumefile = &get_resume_filename($infile);
+    # This returns the 9th element of the 13 element array 
+    # created by the stat function.
+    $tprev = (stat ($resumefile))[9]; 
+    # if this file is restarted in less than 5 seconds then 
+    # remove the .resume file
+    if ( ($tnow - $tprev) < $tdiff ) {
+        unlink($resumefile);
+    }
+
+    $mplayer_parameters = join(' ',@ARGV[0..$#ARGV-1]);
+}
+
+&init();
+&save_time_offset(&mplayer($mplayer_parameters,$infile), $resumefile);
+
+#close(DEBUG);
+
+# For $pathname, return $path.$filename.resume
+sub get_resume_filename () {
+    my($pathname)=@_;
+    
+    my $idx = rindex($pathname,"/");
+
+    if ($idx == -1) { # There was no "/" in $pathname
+	return ".".$pathname.".resume";
+    } else {
+	# Now we need to split out the path from the filename.
+	my $path = substr($pathname,0,$idx+1);
+	my $filename = substr($pathname,$idx+1);
+	return "$path.$filename.resume";
+    }
+}
+
+# Calls mplayer and returns the last known video position
+sub mplayer () {
+    my($parameters,$infile)=@_;
+    my $seconds=0;
+    my $timecode=&get_time_offset($infile);
+    my $command = "mplayer $parameters -ss $timecode \"$infile\" 2>&1 2>/dev/null |";
+
+    open(SHELL, $command);
+    # The kind of line we care about looks like this example:
+    # A:1215.2 V:1215.2 A-V:  0.006 ct:  0.210 207/201 13%  0%  1.9% 0 0 68%
+    # But all we care to look at is the first number.
+    
+    while (<SHELL>) {
+	#print DEBUG $_;
+	if (m/A: *[0-9]+\.[0-9]/) { # See if this line has timecodes on it
+	    my $last_timecode_line = &extract_last_timecode_line($_);
+	    if ($last_timecode_line =~ m/ *([0-9]+\.[0-9]) V/) {
+		$seconds=$1;
+	    }
+	}
+    }
+    close(SHELL);
+
+    return $seconds;
+
+    sub extract_last_timecode_line () {
+	my ($line)=@_;
+	my @lines=split('A:',$line);
+	return @lines[$#lines-1];
+    }
+}
+
+# Save the last known video position
+sub save_time_offset () {
+    my($seconds, $resumefile)=@_;
+
+    open(RESUMEFILE, ">$resumefile") || die "Unable to open $resumefile for writing";
+    print RESUMEFILE "$seconds";
+    close(RESUMEFILE);
+}
+
+# returns the number of seconds corresponding to the last known video position,
+# in hh:mm:ss format, compatible with the "-ss" parameter to mplayer
+sub get_time_offset () {
+    my($videofile)=@_;
+    my($resumefile) = &get_resume_filename($videofile);
+    my $seconds=0;
+    my $timecode;
+
+    open(RESUMEFILE, "<$resumefile") || return "00:00:00";
+    while(<RESUMEFILE>) {
+	$seconds=$_;
+    }
+    close(RESUMEFILE);
+
+    my $hours = floor($seconds/3600);
+    $seconds = $seconds - $hours*3600;
+
+    my $minutes = floor($seconds/60);
+    $seconds = int($seconds - $minutes*60) - $fudge_factor;
+
+    $timecode = sprintf "%02d:%02d:%02d",$hours,$minutes,$seconds;
+#    print "TIMECODE: $timecode\n";
+    return $timecode;
+}
+
+sub print_usage () {
+    print "USAGE:\n";
+    print "\t",$ARGV[0], "[mplayer parameters] video_file\n";
+    print "\t","e.g. ",$ARGV[0], "-fs -zoom my.mpg\n";
+    print "\t","Version 5/3/2006\n";
+}
diff --git a/abs/core-testing/linhes-scripts/src/myth2mp3 b/abs/core-testing/linhes-scripts/src/myth2mp3
new file mode 100755
index 0000000..89181c1
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2mp3
@@ -0,0 +1,82 @@
+#!/bin/sh
+# convert recordings to as mp3 audio only
+# version 0.9
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# In the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2mp3 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%"
+
+# options:
+BITRATE=256k		#ie. 128k, 160k, 192k, 224k, 256k
+USECUTLIST=Y		#Y or N
+
+# where the converted audio is stored
+OUT_DIR=/myth/music
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toMP3-$$
+TMPFILE=/myth/tmp/$TMPNAME.mp3
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+FFINPUTFILE=$1
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2mp3.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $1     Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+# check if using cutlist
+if [ $USECUTLIST = Y ];then
+    MYTHCOMMFRAMES=`mythcommflag --getcutlist -f "$FFINPUTFILE" | grep 'Cutlist:' | cut -d \  -f 2`
+    if [ -n "$MYTHCOMMFRAMES" ]; then
+        echo "Extracting Cutlist..." >> $LOGFILE
+        /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+        FFINPUTFILE=$TMPCUTFILE
+    fi
+fi
+
+# run ffmpeg to do conversion
+echo "Encoding..." >> $LOGFILE
+/usr/bin/nice -n19 /usr/bin/ffmpeg -i "$FFINPUTFILE" -vn -acodec libmp3lame -ab $BITRATE -ar 44100 -ac 2 "$TMPFILE"
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.mp3
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+    OUTPUTFILE=$OUT_DIR/$2-$i.mp3
+    i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+    echo "File Encoded Sucessfully: $OUTPUTFILE" >> $LOGFILE
+    hours=$((seconds / 3600))
+    seconds=$((seconds % 3600))
+    minutes=$((seconds / 60))
+    seconds=$((seconds % 60))
+    echo "Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)" >> $LOGFILE
+else
+    echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+# clean up left over files
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
diff --git a/abs/core-testing/linhes-scripts/src/myth2x264 b/abs/core-testing/linhes-scripts/src/myth2x264
new file mode 100755
index 0000000..014fcbe
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2x264
@@ -0,0 +1,223 @@
+#!/bin/sh
+# convert recording to x264 encoded avi
+# version 0.6
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV
+# in the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2x264 "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%"
+
+# options:
+RESOLUTION=960:544 	# to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544)
+BITRATE=2500		# use negative bitrate to set output file size in KB (ie. -700000)
+USECUTLIST=Y		# Y or N
+
+# where the converted video is stored
+OUT_DIR=/myth/video
+
+# database settings
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e"
+
+#------FUNCTIONS---------------
+update_comment()
+# Arg_1 = COMMENT
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+update_status()
+# Arg_1 = status code
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+check_background_progress()
+# check mencoder progress in background
+# Arg_1 = PROGRESS CALCULATION
+{
+while [ `tail -1 $STATUSFILE | grep -c "^x264 \[info\]: kb/s:"` = 0 ]
+do
+    sleep 10
+    check_myth_jobcmds
+    current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"`
+    prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'`
+    current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'`
+    if [ -n "$prog_percent" ]; then
+        prog_percent=`expr $prog_percent / $1`
+        echo "$prog_percent% Completed @ $current_FPS fps"
+        update_comment "$prog_percent% Completed @ $current_FPS fps"
+    fi
+    sleep 10
+done
+}
+
+check_myth_jobcmds()
+# check the myth database for stop pause or resume commands
+{
+if [ $NO_JOBID = 0 ]; then
+    CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'`
+    case "$CURRENT_CMD" in
+	# JOB_RUN
+	0) ;;
+	# JOB_PAUSE
+	1) update_status 6
+	   kill -s STOP $mencoder_pid ;;
+	# JOB_RESUME
+	2) update_status 4
+       `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+       kill -s CONT $mencoder_pid ;;
+	# JOB_STOP
+	4) update_status 5
+	   `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+       kill -9 $mencoder_pid $command_pid
+       clean_up_files
+       echo "Encode Cancelled" >> $LOGFILE
+       update_status 320
+ 	   exit ;;
+    esac
+fi
+}
+
+get_mencoder_pid()
+{
+process_name=""
+i1=1
+while [ "$process_name" != "found" ]; do
+   if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then
+      process_name="found"
+   else
+      mencoder_pid=`expr $mencoder_pid + 1`
+   fi
+   i1=`expr $i1 + 1`
+   if [ $i1 -gt 20 ]; then
+      break
+   fi
+done
+}
+
+clean_up_files()
+# clean up left over files
+{
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
+unlink $TWOPASSFILE 2> /dev/null
+unlink $TWOPASSFILE.tmp 2> /dev/null
+unlink $STATUSFILE 2> /dev/null
+unlink $MENCODER_RETURN_CODE 2> /dev/null
+unlink $MENCODER_RETURN_CODE_2 2> /dev/null
+}
+
+#-------MAIN SCRIPT------------
+
+# check if %JOBID% is passed from command line
+JOBID=$5
+if [ -z "$JOBID" ]; then
+    NO_JOBID=1
+else
+    NO_JOBID=0
+fi
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toX264-$$
+TMPFILE=/myth/tmp/$TMPNAME.avi
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+MENINPUTFILE=$1
+TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log
+STATUSFILE=/myth/tmp/$TMPNAME-status.log
+MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code
+MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2x264.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $MENINPUTFILE     Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+check_myth_jobcmds
+
+# check if using cutlist
+if [ $USECUTLIST = Y ]; then
+    MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \  -f 2`
+    if [ -n "$MYTHCOMMFRAMES" ]; then
+        echo "Extracting Cutlist..." >> $LOGFILE
+        update_comment "Extracting Cutlist"
+        /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+        MENINPUTFILE=$TMPCUTFILE
+    fi
+fi
+
+# run mencoder in background to do 1st pass conversion
+echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \
+-x264encopts threads=auto:pass=1:turbo=1:subq=1:frameref=1:bframes=3:bitrate=$BITRATE \
+-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2"
+
+# run mencoder in background to do 2nd pass conversion
+echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc x264 -vf lavcdeint,scale=$RESOLUTION \
+-x264encopts threads=auto:pass=2:subq=5:8x8dct:frameref=3:bframes=3:b_pyramid:weight_b:bitrate=$BITRATE \
+-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2 + 50"
+
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.avi
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+    OUTPUTFILE=$OUT_DIR/$2-$i.avi
+    i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+    echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE
+    hours=$((seconds / 3600))
+    seconds=$((seconds % 3600))
+    minutes=$((seconds / 60))
+    seconds=$((seconds % 60))
+    echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE
+    update_status 272
+    update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)"
+else
+    update_status 304
+    update_comment "Encode Failed.  Exit status: $ERROR"
+    echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+clean_up_files
diff --git a/abs/core-testing/linhes-scripts/src/myth2xvid b/abs/core-testing/linhes-scripts/src/myth2xvid
new file mode 100755
index 0000000..d0fcb42
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/myth2xvid
@@ -0,0 +1,223 @@
+#!/bin/sh
+# convert recording to xvid encoded avi
+# version 1.3
+
+# usage:
+# first parameter must be %DIR%/%FILE% of the recording
+# second parameter must be the desired base name of the output
+# third parameter must be %CHANID% if you set USECUTLIST=Y
+# fourth parameter must be %STARTTIME% if you set USECUTLIST=Y
+# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV
+# in the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/myth2xvid "%DIR%/%FILE%" "%TITLE% - %SUBTITLE%" "%CHANID%" "%STARTTIME%" "%JOBID%"
+
+# options:
+RESOLUTION=960:544 	# to keep the source resolution use -1 or to scale down use xxx:xxx (ie 960:544)
+BITRATE=2500		# use negative bitrate to set output file size in KB (ie. -700000)
+USECUTLIST=Y		# Y or N
+
+# where the converted video is stored
+OUT_DIR=/myth/video
+
+# database settings
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e"
+
+#------FUNCTIONS---------------
+update_comment()
+# Arg_1 = COMMENT
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+update_status()
+# Arg_1 = status code
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+check_background_progress()
+# check mencoder progress in background
+# Arg_1 = PROGRESS CALCULATION
+{
+while [ `tail -1 $STATUSFILE | grep -c "^Audio stream:"` = 0 ]
+do
+    sleep 10
+    check_myth_jobcmds
+    current_status=`tail -1 $STATUSFILE | grep "([ 0-9]\{1,\}%)"`
+    prog_percent=`echo "$current_status" | sed 's_.*(\([ 0-9][ 0-9]\)%).*_\1_'`
+    current_FPS=`echo "$current_status" | sed 's_.*\([ 0-9][ 0-9].[ 0-9][ 0-9]\)fps.*_\1_'`
+    if [ -n "$prog_percent" ]; then
+        prog_percent=`expr $prog_percent / $1`
+        echo "$prog_percent% Completed @ $current_FPS fps"
+        update_comment "$prog_percent% Completed @ $current_FPS fps"
+    fi
+    sleep 10
+done
+}
+
+check_myth_jobcmds()
+# check the myth database for stop pause or resume commands
+{
+if [ $NO_JOBID = 0 ]; then
+    CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'`
+    case "$CURRENT_CMD" in
+	# JOB_RUN
+	0) ;;
+	# JOB_PAUSE
+	1) update_status 6
+	   kill -s STOP $mencoder_pid ;;
+	# JOB_RESUME
+	2) update_status 4
+       `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+       kill -s CONT $mencoder_pid ;;
+	# JOB_STOP
+	4) update_status 5
+	   `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+       kill -9 $mencoder_pid $command_pid
+       clean_up_files
+       echo "Encode Cancelled" >> $LOGFILE
+       update_status 320
+ 	   exit ;;
+    esac
+fi
+}
+
+get_mencoder_pid()
+{
+process_name=""
+i1=1
+while [ "$process_name" != "found" ]; do
+   if [ "`ps $mencoder_pid | grep mencoder | sed 's_.*\(mencoder\).*_\1_'`" = "mencoder" ]; then
+      process_name="found"
+   else
+      mencoder_pid=`expr $mencoder_pid + 1`
+   fi
+   i1=`expr $i1 + 1`
+   if [ $i1 -gt 20 ]; then
+      break
+   fi
+done
+}
+
+clean_up_files()
+# clean up left over files
+{
+unlink $TMPFILE 2> /dev/null
+unlink $TMPCUTFILE 2> /dev/null
+unlink $TMPCUTFILE.map 2> /dev/null
+unlink $TWOPASSFILE 2> /dev/null
+unlink $TWOPASSFILE.tmp 2> /dev/null
+unlink $STATUSFILE 2> /dev/null
+unlink $MENCODER_RETURN_CODE 2> /dev/null
+unlink $MENCODER_RETURN_CODE_2 2> /dev/null
+}
+
+#-------MAIN SCRIPT------------
+
+# check if %JOBID% is passed from command line
+JOBID=$5
+if [ -z "$JOBID" ]; then
+    NO_JOBID=1
+else
+    NO_JOBID=0
+fi
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=toXVID-$$
+TMPFILE=/myth/tmp/$TMPNAME.avi
+TMPCUTFILE=/myth/tmp/$TMPNAME.mpg
+MENINPUTFILE=$1
+TWOPASSFILE=/myth/tmp/$TMPNAME-2pass.log
+STATUSFILE=/myth/tmp/$TMPNAME-status.log
+MENCODER_RETURN_CODE=/myth/tmp/$TMPNAME-mencoder_return_code
+MENCODER_RETURN_CODE_2=/myth/tmp/$TMPNAME-mencoder_return_code_2
+
+# log file location
+LOGFILE=/var/log/mythtv/myth2xvid.log
+CDate="`date`"
+echo "" >> $LOGFILE
+echo $CDate >> $LOGFILE
+echo "File to encode: $MENINPUTFILE     Name: $2" >> $LOGFILE
+
+# start timer
+beforetime="$(date +%s)"
+
+check_myth_jobcmds
+
+# check if using cutlist
+if [ $USECUTLIST = Y ]; then
+    MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $MENINPUTFILE | grep 'Cutlist:' | cut -d \  -f 2`
+    if [ -n "$MYTHCOMMFRAMES" ]; then
+        echo "Extracting Cutlist..." >> $LOGFILE
+        update_comment "Extracting Cutlist"
+        /usr/bin/nice -n19 /usr/bin/mythtranscode --chanid "$3" --starttime "$4" --outfile "$TMPCUTFILE" --mpeg2 --honorcutlist
+        MENINPUTFILE=$TMPCUTFILE
+    fi
+fi
+
+# run mencoder in background to do 1st pass conversion
+echo "Encoding 1st Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \
+-xvidencopts pass=1:vhq=0:turbo:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \
+-o /dev/null > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE ) & 
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2"
+
+# run mencoder in background to do 2nd pass conversion
+echo "Encoding 2nd Pass at $RESOLUTION..." >> $LOGFILE
+( /usr/bin/nice -n19 /usr/bin/mencoder $MENINPUTFILE -passlogfile $TWOPASSFILE \
+-oac copy -ovc xvid -vf lavcdeint,scale=$RESOLUTION \
+-xvidencopts pass=2:vhq=0:bvhq=1:me_quality=5:quant_type=mpeg:max_bframes=0:bitrate=$BITRATE \
+-o "$TMPFILE" > $STATUSFILE 2>&1 ; echo $? > $MENCODER_RETURN_CODE_2 ) &
+mencoder_pid=$!
+command_pid=$mencoder_pid
+get_mencoder_pid
+
+check_background_progress "2 + 50"
+
+ERROR=$?
+
+# make output filename unique
+OUTPUTFILE=$OUT_DIR/$2.avi
+i=1
+while [ -e "$OUTPUTFILE" ]
+do
+    OUTPUTFILE=$OUT_DIR/$2-$i.avi
+    i=`expr $i + 1`
+done
+
+# move temp file to output location
+chown mythtv "$TMPFILE" && mv "$TMPFILE" "$OUTPUTFILE"
+
+# stop timer
+aftertime="$(date +%s)"
+seconds="$(expr $aftertime - $beforetime)"
+
+if [ $ERROR -eq 0 ]; then
+    echo "File Encoded Successfully: $OUTPUTFILE" >> $LOGFILE
+    hours=$((seconds / 3600))
+    seconds=$((seconds % 3600))
+    minutes=$((seconds / 60))
+    seconds=$((seconds % 60))
+    echo "Encoding took $hours hour(s) $minutes minute(s) $seconds second(s) @ $current_FPS fps." >> $LOGFILE
+    update_status 272
+    update_comment "Encode Successful. Encoding Time: $hours hour(s) $minutes minute(s) $seconds second(s)"
+else
+    update_status 304
+    update_comment "Encode Failed.  Exit status: $ERROR"
+    echo "ERROR: $ERROR" >> $LOGFILE
+fi
+
+clean_up_files
\ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh b/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh
new file mode 100755
index 0000000..6dbd39e
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mythwelcome-set-alarm.sh
@@ -0,0 +1,23 @@
+#!/bin/sh
+#$1 is the first argument to the script. It is the time in seconds since 1970
+#This is defined in mythwelcome with the time_t argument
+
+# Configure mythwelcome --setup page:
+# Command to Set Wakeup Time:     sudo sh -c "/usr/LH/bin/mythwelcome-set-alarm.sh $time"
+# Wakeup Time Format:             time_t
+# nvram-wakeup Restart Command:   Leave this blank
+# Command to reboot:              sudo /sbin/reboot
+# Command to shutdown:            sudo /sbin/poweroff
+# Command to run Xterm:           xterm
+# Command to start the Frontend:  /usr/bin/mythfrontend -l /var/log/mythtv/mythfrontend.log
+
+# Configure mythtv-setup Shutdown/Wakeup Options page:
+# Idletimeout (secs):             any value greater that 0
+# Wakeup time format:             yyyy-MM-dd:hh:mm
+# Set wakeup time command:        /usr/bin/mythshutdown --setwakeup $time
+# Server Halt command:            /usr/bin/mythshutdown --shutdown
+# Pre shutdown check command:     /usr/bin/mythshutdown --check 
+
+echo 0 > /sys/class/rtc/rtc0/wakealarm      #this clears your alarm
+echo $1 > /sys/class/rtc/rtc0/wakealarm     #this writes your alarm
+cat /proc/driver/rtc > /var/log/wake_alarm
diff --git a/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh b/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh
new file mode 100755
index 0000000..4aadf6d
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/mythwelcome-test-wakeup.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm"      #this clears your alarm
+sudo sh -c "echo `date '+%s' -d '+ 4 minutes'` > /sys/class/rtc/rtc0/wakealarm"     #this writes your alarm 
+cat /proc/driver/rtc
+cat /proc/driver/rtc > /var/log/wake_alarm
+echo "Your computer is set to start up in 4 minutes using ACPI."
+echo -n "Do you want to shutdown the computer now? (y/n): "
+read -n 1 shutdown
+if [ "$shutdown" == "y" ]; then
+    echo -e "\nShutting down now..."
+    sudo shutdown -t 5 -h now
+else
+    echo -e "\nTo shutdown execute the following:"
+    echo "      sudo shutdown -t 5 -h now"
+fi
diff --git a/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh b/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh
new file mode 100755
index 0000000..4da808b
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/pause-mythcommflag.sh
@@ -0,0 +1,53 @@
+#!/bin/bash
+# pause-mythcommflag.sh   v0.2  05/21/09
+# Utility to automatically pause & unpause mythcommflag if CPU usage is above a certain level
+# Free for any use.
+# Installation:
+#  cp pause-mythcommflag.sh /usr/LH/bin
+#  chmod +x /usr/LH/bin/pause-mythcommflag.sh
+# Usage: Executed from sv start pause-mythcommflag
+
+# Threshold for when mythcommflag will be paused
+CPUTHRESHOLD=75
+
+# Second Threshold for when mythcommflag is already paused
+PAUSEDCPUTHRESHOLD=45
+
+# Log file to write (change to /dev/null for no log)
+LOG=/var/log/mythtv/pause-mythcommflag.log
+
+# Number of seconds to wait between checking for mythcommflag process
+SLEEP=5
+
+#sleep $SLEEP
+
+touch $LOG
+
+COMMFLAGSTATE=1
+
+while true; do
+    PROCCOMMFLAG=`pidof mythcommflag`
+    if [ -n "${PROCCOMMFLAG}" ]
+    then
+        FRONTENDCPU=`top -bn1u mythtv | grep mythfrontend | awk '{ print $9 }'`
+        if [ $COMMFLAGSTATE -eq 1 ]
+    	then
+	        CPUTHRESHOLD1=$CPUTHRESHOLD
+	    else
+	        CPUTHRESHOLD1=$PAUSEDCPUTHRESHOLD
+	    fi
+        if [ "$FRONTENDCPU" -ge "$CPUTHRESHOLD1" ]
+        then
+#            echo "$(date) FE CPU $FRONTENDCPU% is greater than $CPUTHRESHOLD1%, PAUSE Commflagging" >> $LOG
+            kill -s STOP $PROCCOMMFLAG
+	    COMMFLAGSTATE=0
+        else
+#            echo "$(date) FE CPU $FRONTENDCPU% is less than $CPUTHRESHOLD1%, CONTINUE Commflagging" >> $LOG
+            kill -s CONT $PROCCOMMFLAG
+	    COMMFLAGSTATE=1
+        fi
+#    else
+#        echo "No COMMFLAG Process Active" >> $LOG
+    fi
+    sleep $SLEEP
+done
diff --git a/abs/core-testing/linhes-scripts/src/pause_mythcommflag b/abs/core-testing/linhes-scripts/src/pause_mythcommflag
new file mode 100755
index 0000000..da9e659
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/pause_mythcommflag
@@ -0,0 +1,7 @@
+/var/log/mythtv/pause-mythcommflag.log {
+	daily
+	rotate 7
+	notifempty
+	copytruncate
+	compress
+}
diff --git a/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag b/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag
new file mode 100755
index 0000000..38ca45f
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/run-limit-mythcommflag
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec /usr/bin/nice -19 /usr/LH/bin/limit-mythcommflag.sh
diff --git a/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag b/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag
new file mode 100755
index 0000000..8bd25ac
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/run-pause-mythcommflag
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec /usr/bin/nice -19 /usr/LH/bin/pause-mythcommflag.sh
diff --git a/abs/core-testing/linhes-scripts/src/screenshooter.sh b/abs/core-testing/linhes-scripts/src/screenshooter.sh
new file mode 100755
index 0000000..9e35786
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/screenshooter.sh
@@ -0,0 +1,225 @@
+#!/bin/bash
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# with contributions from TJC and Sarah Hayes
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# This is alpha code to auto-generate thumbnails for previews in MythVideo.
+# It won't currently work on some filenames that have spaces in them.
+# It's surely just a matter of escaping or quoting, but I have yet to find
+# the right incantation.
+
+# example usage:
+# find -L /myth/video -wholename '*.covers' -prune -o -name '*.resume' -o -type f -exec screenshooter.sh -v {} \;
+
+# limitations:
+# --
+# In an MBE/SBE/FE setup this might get the settings for the wrong machine...
+# The script has no AI to know if a grabbed frame is useful to identify the video, only that it was able to grab it.
+# Doesn't clean up after itself if videos are deleted, though MythTV may do this on its own.
+# Minimum theoretical compatible video length is 4 seconds.  Shorter videos will not work with this version.
+# Surely more limitations I can't think of because it's my baby :)
+
+Usage() {
+    echo "USAGE:"
+    echo `basename $0` "-v PATHNAME [-s SECONDS] [-c] [-b HOSTNAME] [-u USERNAME] [-p PASSWORD] [-o]"
+    echo "-v: pathname to Video"
+    echo "-s: number of Seconds to skip before capturing (270 by default)"
+    echo "-c: Clobber any previous screenshot found for this video (off by default)"
+    echo "-b: mysql server (Backend) hostname (localhost by default)"
+    echo "-u: mysql Username (mythtv by default)"
+    echo "-p: mysql Password (mythtv by default)"
+    echo "-o: verbOse mode (off by default)"
+    echo "-x: check for valid video eXtension (off by default)"
+    echo
+    echo "EXAMPLE: $0 -v /myth/video/HDTV/shuttle.mpg -c -s 30"
+    exit 3
+}
+
+if [ -z $1 ]; then
+    Usage
+fi
+
+V_MISSING=1
+
+while getopts "v:sbupochx" FLAG ; do
+    case "$FLAG" in
+	v) VIDEO_PATHNAME="$OPTARG"
+	    V_MISSING=0;;
+	s) SKIPAHEAD="$OPTARG";;
+	c) CLOBBER=1;;
+	b) BACKEND_HOSTNAME="$OPTARG";;
+	u) DBUSERNAME="$OPTARG";;
+	p) DBPASSWORD="$OPTARG";;
+	o) VERBOSE=1;;
+	x) EXTENSION_CHECK=1;;
+	*) Usage;;
+    esac
+done
+
+if [ $V_MISSING == 1 ]; then
+    Usage
+fi
+
+# Declaring Variables here and assigning sensible defaults.
+
+# SKIPAHEAD is the number of seconds to skip ahead before starting the frame capture.
+# Set it to an arbitrary value if none is specified.
+SKIPAHEAD=${SKIPAHEAD:-"270"}
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+# Defaults to quiet. 
+VERBOSE=${VERBOSE:-0}  
+# Unless otherwise told, do not clobber existing cover files.
+CLOBBER=${CLOBBER:-0}
+# Unless otherwise told, do not check the file extension against
+# MythTV's list of registered video file types.
+EXTENSION_CHECK=${EXTENSION_CHECK:-0}
+
+VIDEO_CAPTURE_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoArtworkDir' limit 1")
+if [ ! -d "$VIDEO_CAPTURE_HOME" ] ; then
+    echo "Directory $VIDEO_CAPTURE_HOME does not exist, nowhere to put the screen shot!"
+    echo "Have you configured MythVideo yet?"
+    exit 1
+fi
+
+VIDEO_HOME=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select data from settings where value='VideoStartupDir' limit 1")
+if [ ! -d "$VIDEO_HOME" ] ; then
+    echo "Directory $VIDEO_HOME does not exist, nowhere to put the screen shot!"
+    echo "Have you configured MythVideo yet?"
+    exit 1
+fi
+
+VIDEO_FILENAME=$(basename "$VIDEO_PATHNAME")
+VIDEO_EXTENSION=${VIDEO_FILENAME##*.}
+# Since we cron'd lets first make sure the validity of the file
+if [ "$EXTENSION_CHECK" == "1" ]; then
+    EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select f_ignore from videotypes where extension=\"$VIDEO_EXTENSION\";")
+    #excheck returns blank, it found nothing.  
+    if [ "$EXCHECK" == "" ]; then
+	if [ "$VERBOSE" == "1" ]; then
+	    echo "$VIDEO_EXTENSION does not appear to be a valid media file, skipping."
+	fi
+	exit 1
+    else 
+	# It is valid, but should we ignore it.  If so then excheck will equal 1.
+	if [ "EXCHECK" == "1" ]; then 
+	    if [ "$VERBOSE" == "1" ]; then
+		echo "$VIDEO_EXTENSION is set to ignore."
+	    fi
+	    exit 1
+	fi
+	# It is valid, it's not set to ignore.  
+	if [ "$VERBOSE" == "1" ]; then
+	    echo "$VIDEO_EXTENSION appears in the Database, checking further."
+	fi
+	EXCHECK=$(mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "select title from videometadata where filename=\"$VIDEO_PATHNAME\";")
+	#Right, the file is supposed to be playable.  Has it been imported to the Db yet?
+	if [ "$EXCHECK" == "" ] ; then
+	    if [ "$VERBOSE" == "1" ]; then 
+		echo "$VIDEO_FILENAME does not exist in the database."
+	    fi  
+	    exit 1
+	# If you decide you want the system to 'auto import' the video then comment out 
+	# the exit line and uncomment the rest of it.  Bewarned, this is sucky SQL at 
+	# the best but will give sensible defaults.
+	#
+	#    if [ "$VERBOSE" == "1" ]; then
+	#     echo "Importing $VIDEO_FILENAME in to database."
+	#    fi
+	#    mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -sNBe "insert into videometadata (intid, title, director, plot, rating, inetref, year, userrating, length, showlevel, filename, coverfile, childid, browse, playcommand, category) values (' ', '$VIDEO_FILENAME', 'Unknown', 'Unknown', 'NR', '00000000', 1895, 0.0, 0, 1, '$VIDEO_PATHNAME', 'No Cover', -1, 1, ' ', 0);"
+	fi
+    fi
+fi
+
+if [ "$CLOBBER" -eq 0 ]; then
+      # Since we're not clobbering, first check to see if this video already has a coverfile entry in MySQL:
+    SQL_CMD="select coverfile from videometadata where filename=\"$VIDEO_PATHNAME\";"
+    CURRENT_COVERFILE=`mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -B -e "$SQL_CMD" | tail -1`
+    
+    if [[ "$CURRENT_COVERFILE" != "" ]] && [[ "$CURRENT_COVERFILE" != "No Cover" ]]; then
+  	  # there's already a cover file for this video
+  	if [ "$VERBOSE" == "1" ]; then 
+	    echo "$VIDEO_FILENAME has cover file, skipping."
+	fi
+	exit 2
+    fi
+fi
+
+
+# Swap the video file extension for png.  Should work assuming the extension only appears ONCE!
+VIDEO_CAPTURE_PATHNAME="$VIDEO_CAPTURE_HOME/$VIDEO_FILENAME.png"
+
+# How many frames of video to capture.  We'll grab the last frame as our screenshot.
+if [ "$VIDEO_EXTENSION" == "m4v" ]; then
+    FRAMES_TO_CAPTURE="90"
+    SHOTFILE="000000"$FRAMES_TO_CAPTURE".png"
+else
+    FRAMES_TO_CAPTURE="05"
+fi
+
+SHOTFILE="000000"$FRAMES_TO_CAPTURE".png"
+VIDEO_STATS="/tmp/screenshooter_video_stats.txt"
+
+cd /tmp
+
+# The video we're processing may be shorter than SKIPAHEAD seconds.
+# Keep trying to capture until we find a SKIPAHEAD value within the length of the video.
+# Give up if we reach 0 seconds.
+while [ ! -f "$SHOTFILE" ]; do
+    /usr/bin/mplayer -ss $SKIPAHEAD -vf scale=640:-2 -ao null -vo png -quiet -frames $FRAMES_TO_CAPTURE -identify "$VIDEO_PATHNAME" &> $VIDEO_STATS &
+    TIMEOUT=9
+
+    # Some video formats will play audio only. This loop gives the above command 20 seconds to
+    # finish, otherwise it gets killed.
+    while [ -n "`ps -p $! --no-heading`" ]; do
+	TIMEOUT=$(expr $TIMEOUT - 1)
+	if [ "$TIMEOUT" -le 0 ]; then
+	    kill -9 $!
+	    break
+	fi
+	sleep 1
+    done
+	    
+    SKIPAHEAD=$(expr $SKIPAHEAD / 2)
+    if [ "$SKIPAHEAD" -le 0 ]; then
+	break
+    fi
+done
+
+if [ -f "$SHOTFILE" ]; then
+    # Now, the video_capture is taken, and the name of the shot is in $SHOTFILE
+    # Rename it and move it to the place where video_captures live.
+    /bin/mv -f "$SHOTFILE" "$VIDEO_CAPTURE_PATHNAME"
+    /bin/rm -f 000000*png
+    chown mythtv: "$VIDEO_CAPTURE_PATHNAME"
+
+    # We've got the shotfile nailed, now calculate video run length.
+    VIDEO_LENGTH_IN_SECONDS=`grep ID_LENGTH $VIDEO_STATS | awk -F'=' '{print $2}'`
+    VIDEO_LENGTH_IN_INTEGER_SECONDS=${VIDEO_LENGTH_IN_SECONDS/%.*/}
+    if [ $VIDEO_LENGTH_IN_INTEGER_SECONDS -lt 60 ]; then
+	VIDEO_LENGTH_IN_MINUTES="1"
+    else
+	VIDEO_LENGTH_IN_MINUTES=$(expr $VIDEO_LENGTH_IN_INTEGER_SECONDS / 60)
+    fi
+
+    SQL_CMD="update videometadata set length=\"$MIN_LENGTH\" where filename=\"$VIDEO_PATHNAME\";"
+    mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD"
+
+    
+    # put the screenshot pathname and any runlength info into videometadatatable
+
+    # Pre-escape any single or double quotes for the SQL command.
+
+    VIDEO_CAPTURE_PATHNAME=`echo $VIDEO_CAPTURE_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' `
+    VIDEO_PATHNAME=`echo $VIDEO_PATHNAME | sed -e "s/'/\\\'/g" -e 's/"/\\\"/g' `
+    SQL_CMD="update videometadata set coverfile=\"$VIDEO_CAPTURE_PATHNAME\", length=\"$VIDEO_LENGTH_IN_MINUTES\" where filename=\"$VIDEO_PATHNAME\";"
+
+    mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e "$SQL_CMD"
+else
+    echo "No image could be captured from $VIDEO_PATHNAME"
+    exit 1
+fi
diff --git a/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh b/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh
new file mode 100755
index 0000000..db01147
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/shootscreens-mythtv.sh
@@ -0,0 +1,11 @@
+#! /bin/bash 
+# available sizes: 34, 25, 24, 20, 18, 17, 14, 12, 11, 10
+export FONT="-adobe-helvetica-bold-*-*-*-34-*-*-*-*-*-*-*"
+echo "This could take several minutes," > /tmp/screens
+echo "depending on your hardware and the" >> /tmp/screens
+echo "number and type of videos you have." >> /tmp/screens
+echo "It will only work on videos scanned" >> /tmp/screens
+echo "with Video Manager." >> /tmp/screens 
+cat /tmp/screens | osd_cat --font=$FONT --shadow=3 --pos=middle --align=centre --offset=200 --color=yellow --delay=0 &
+shootscreens.sh 1
+/bin/rm -f /tmp/screens
\ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/shootscreens.sh b/abs/core-testing/linhes-scripts/src/shootscreens.sh
new file mode 100755
index 0000000..7b1260c
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/shootscreens.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+# Written by Bob Igo from the MythTV Store at http://MythiC.TV
+# Email: bob@stormlogic.com
+#
+# If you run into problems with this script, please send me email
+
+# This code generates screenshots (cover files) for all videos in
+# MythTV's videometadata table that do not have covers associated with them.
+
+if [ "$1" == "1" ]; then
+    OSD=1
+else
+    OSD=0
+fi
+
+> /tmp/shooter.log
+{
+    percentage=0
+    # Change IFS to be a newline so that filenames with spaces will be handled properly.
+    IFS=$'\n'
+    vidcount=`mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | wc -l`
+    increment=$(expr 100 / $vidcount)
+    for vid in `mysql -u root mythconverg -B -e "select filename from videometadata where coverfile=\"No Cover\";" | grep -v -e "^filename$"`
+    do
+      if [ $OSD == 1 ]; then
+	osd_cat --barmode=percentage --percentage=$percentage --pos=middle --align=center --color=white --text="Generating Video Thumbnails..." --font=$FONT --shadow=3 --color=yellow --delay=0 &
+	percentage=$(expr $percentage + $increment)
+      fi
+
+      screenshooter.sh -v $vid
+    done
+    if [ $OSD == 1 ]; then
+	killall -9 osd_cat
+	osd_cat --barmode=percentage --percentage=100 --pos=middle --align=center --color=white --text="Video Thumbnails Generated!" --font=$FONT --shadow=3 --color=yellow --delay=3 &
+    fi
+}
\ No newline at end of file
diff --git a/abs/core-testing/linhes-scripts/src/vdpau-detector b/abs/core-testing/linhes-scripts/src/vdpau-detector
new file mode 100755
index 0000000..c8cd155
--- /dev/null
+++ b/abs/core-testing/linhes-scripts/src/vdpau-detector
@@ -0,0 +1,103 @@
+#!/bin/bash
+
+# This script written by an anonymous author
+# Original page http://www.knoppmythwiki.org/index.php?page=HardwareAcceleratedVideo
+#
+# It's modded to allow vdpau switches commands to pass to a modded version of Bob Igo's
+# mplayer-resumer.pl wrapper for mplayer
+#
+# User can customize commandline for mplayer by editing the appropriate sections below
+# They include BASIC_OPTS, NOHD_OPTS, and LOW_OPTS
+
+IAM=$0
+FILE=$1
+
+#if no input display usage
+if [[ -z "$FILE" ]]; then
+        echo usage: $0 /path/to/file
+        exit
+fi
+
+MPLAYER="/usr/bin/mplayer"
+
+# For a complete list of options, see the mplayer DOCS
+# http://www.mplayerhq.hu/DOCS/man/en/mplayer.1.html
+#
+
+# Options for all videos: fullscreen, zoom, and use software eq
+BASIC_OPTS="-fs -zoom"
+
+# Options for non-HD videos: force aspect to 16x10 (to ensure video fills TV screen)
+# You'll need to modify the ratio if your res differs
+# Example: 1920x1080 = 1.778 = 16:9
+# Example: 1680x1050 = 1.600 = 16:10
+# Example: 1280x720 = 1.778 = 16:9
+
+NOHD_OPTS="-aspect 16:10"
+
+# Options for normal and lowres videos: use XV forcing 16x10
+LOW_OPTS="-aspect 16:10 -vo xv"
+
+VWIDTH=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_WIDTH | cut -c 16-25)
+VCODEC=$($MPLAYER -identify -vo vdpau -frames 0 "$FILE" | grep ID_VIDEO_CODEC | cut -c 16-25)
+
+# all following echo commands can be uncommented for debug info
+#echo .
+#echo " DEBUG info: video codec: $VCODEC"
+#echo " DEBUG info: video width: $VWIDTH"
+#echo " Debug info: 
+
+
+# Test for codec, if it's supported by VDPAU, set options to use it. Then, check if the video is in HD,
+# and if it's not, set non-HD options.
+case $VCODEC in
+ffh264) 
+        #echo -e "Playing h.264 file $FILE:\n"
+        MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffh264vdpau"
+        if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+        fi
+        if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+        fi
+        ;;
+ffmpeg2)
+        #echo -e "Playing MPEG2 file $FILE:\n"
+        MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffmpeg12vdpau"
+        if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+        fi
+        if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+        fi
+        ;;
+ffwmv3)
+        #echo -e "Playing WMV3 file $FILE:\n"
+        MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffwmv3vdpau"
+        if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+        fi
+        if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+        fi
+        ;;
+# VC-1 is largely unsupported by nvidia - uncomment this section if you're sure your card supports it.
+ffvc1)
+        #echo -e "Playing VC-1 file $FILE:\n"
+        MPLAYEROPTS="$BASIC_OPTS -vo vdpau -vc ffvc1vdpau"
+        if [ $VWIDTH -lt 1280 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$MPLAYEROPTS $NOHD_OPTS"
+        fi
+        if [ $VWIDTH -lt 700 ] && [ $VWIDTH != 0 ]; then
+                MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+        fi
+        ;;
+*)
+        #echo -e "Playing normal file $FILE:\n"
+        # Use XV and yadif filter with 'normal' (DiVX, XViD, old WMV, etc.) files, and force 16:9
+        # -vf filters only seem to work with XV, or at least they don't work w/VDPAU
+        MPLAYEROPTS="$BASIC_OPTS $LOW_OPTS"
+        ;;
+esac
+
+echo $MPLAYEROPTS
-- 
cgit v0.12


From 9c263f64907a0b3155a632c92b17d3b480f17fda Mon Sep 17 00:00:00 2001
From: Bob Igo <bob@stormlogic.com>
Date: Mon, 3 Aug 2009 14:51:29 -0400
Subject: added brfransen's commercial remover user job script

---
 abs/extra-testing/removecommercials/PKGBUILD       |  11 ++
 .../removecommercials/removecommercials            | 195 +++++++++++++++++++++
 2 files changed, 206 insertions(+)
 create mode 100755 abs/extra-testing/removecommercials/PKGBUILD
 create mode 100755 abs/extra-testing/removecommercials/removecommercials

diff --git a/abs/extra-testing/removecommercials/PKGBUILD b/abs/extra-testing/removecommercials/PKGBUILD
new file mode 100755
index 0000000..312f965
--- /dev/null
+++ b/abs/extra-testing/removecommercials/PKGBUILD
@@ -0,0 +1,11 @@
+pkgname=removecommercials
+pkgver=0.1
+pkgrel=1
+arch=("i686")
+pkgdesc="A multimedia framework based on the MPEG-4 Systems standard"
+source=( removecommercials )
+
+build() {
+	cd $startdir
+	install -D -m 755 removecommercials $startdir/pkg/usr/bin/removecommercials
+}
diff --git a/abs/extra-testing/removecommercials/removecommercials b/abs/extra-testing/removecommercials/removecommercials
new file mode 100755
index 0000000..d7b910f
--- /dev/null
+++ b/abs/extra-testing/removecommercials/removecommercials
@@ -0,0 +1,195 @@
+#!/bin/sh
+# remove commercials from recording
+# version 0.1
+
+# usage:
+# first parameter must be %DIR% of the recording
+# second parameter must be %FILE% of the recording
+# third parameter must be %CHANID%
+# fourth parameter must be %STARTTIME%
+# fifth parameter must be %JOBID% for the User Job status to be updated in MythTV
+# in the mythtv setup screen invoke this script like this:
+# MYTHTV User Job Command:
+# /usr/LH/bin/removecommercials "%DIR%" "%FILE%" "%CHANID%" "%STARTTIME%" "%JOBID%"
+
+# Auguments passed from command line
+VIDEODIR=$1
+FILENAME=$2
+CHANID=$3
+STARTTIME=$4
+JOBID=$5
+
+# database settings
+BACKEND_HOSTNAME=${BACKEND_HOSTNAME:-"localhost"}
+DBUSERNAME=${DBUSERNAME:-"mythtv"}
+DBPASSWORD=${DBPASSWORD:-"mythtv"}
+SQLCMD="mysql -u $DBUSERNAME --password=$DBPASSWORD -h $BACKEND_HOSTNAME mythconverg -e"
+
+#------FUNCTIONS---------------
+update_comment()
+# Arg_1 = COMMENT
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set comment=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+update_status()
+# Arg_1 = status code
+{
+if [ $NO_JOBID = 0 ]; then
+    `$SQLCMD "update jobqueue set status=\"$1\" where id=\"$JOBID\";"`
+fi
+}
+
+check_myth_jobcmds()
+# check the myth database for stop pause or resume commands
+{
+if [ $NO_JOBID = 0 ]; then
+    CURRENT_CMD=`$SQLCMD "select cmds from jobqueue where id=\"$JOBID\";" | sed '/[0-9]/!d'`
+    case "$CURRENT_CMD" in
+	# JOB_RUN
+	0) ;;
+	# JOB_PAUSE
+	1) update_status 6 
+	    kill -s STOP $TPID ;;
+	# JOB_RESUME
+	2) update_status 4
+       `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"` 
+       kill -s CONT $TPID ;;
+	# JOB_STOP
+	4) update_status 5
+	   `$SQLCMD "update jobqueue set cmds=\"0\" where id=\"$JOBID\";"`
+	   kill -9 $TPID
+       clean_up_files
+       echo "Cancelled"
+       update_status 320
+ 	   exit ;;
+    esac
+fi
+}
+
+check_background_progress()
+#check progress in background
+{
+while [ `tail -1 $STATUSFILE | grep -c "Done"` = 0 ]
+do
+    sleep 5
+    check_myth_jobcmds
+    current_status=`tail -1 $STATUSFILE`
+    if [ `expr match "$current_status" '.*\complete'` -ne 0 ]; then
+        prog_percent=`echo "$current_status" | awk '{print $3}'`
+        if [ -n "$prog_percent" ]; then
+            echo "Removing Commercials - $prog_percent Completed"
+            update_comment "Removing Commercials - $prog_percent Completed"
+        fi
+    fi
+done
+}
+
+get_pid()
+{
+process_name=""
+i1=1
+while [ "$process_name" != "found" ]; do
+   if [ "`ps $TPID | grep mythtranscode | sed 's_.*\(mythtranscode\).*_\1_'`" = "mythtranscode" ]; then
+      process_name="found"
+   else
+      TPID=`expr $TPID + 1`
+   fi
+   i1=`expr $i1 + 1`
+   if [ $i1 -gt 20 ]; then
+      break
+   fi
+done
+}
+
+clean_up_files()
+# clean up left over files
+{
+unlink $TMPFILE 2> /dev/null
+unlink $TMPFILE.map 2> /dev/null
+unlink $STATUSFILE 2> /dev/null
+unlink $VIDEODIR/$FILENAME.tmp 2> /dev/null
+}
+
+#-------MAIN SCRIPT------------
+# check if %JOBID% is passed from command line
+JOBID=$5
+if [ -z "$JOBID" ]; then
+    NO_JOBID=1
+else
+    NO_JOBID=0
+fi
+# check if file is a .mpg
+if [ `expr match "$FILENAME" '.*\.mpg'` -ne 0 ]; then
+    MPEG="--mpeg2"
+else
+    MPEG=""
+fi
+
+# create temp filename so multiple instances won't conflict
+TMPNAME=rmvCOMMS-$$
+TMPFILE=$VIDEODIR/$FILENAME-$$
+STATUSFILE=/myth/tmp/$TMPNAME-status.log
+
+touch $STATUSFILE
+
+update_status 4
+
+check_myth_jobcmds
+
+# check for cutlist
+MYTHCOMMFRAMES=`mythcommflag --getcutlist -f $VIDEODIR/$FILENAME | grep 'Cutlist:' | cut -d \  -f 2`
+if [ -n "$MYTHCOMMFRAMES" ]; then
+    echo "Extracting cutlist..."
+    update_comment "Removing Commercials..."
+    ( /usr/bin/nice -n19 /usr/bin/mythtranscode -c $CHANID -s $STARTTIME -o $TMPFILE $MPEG --honorcutlist --showprogress > $STATUSFILE 2>&1 ; echo "Done" >> $STATUSFILE ) &
+    TPID=$!
+    get_pid
+    check_background_progress
+    ERROR=$?
+    if [ $ERROR -ne 0 ]; then
+        echo "Transcoding failed for ${FILENAME} with error $ERROR"
+        exit $ERROR
+    fi
+
+    check_myth_jobcmds
+    # move temp file to output location
+    echo "Moving file..."
+    update_comment "Moving file..."
+    if [ `$SQLCMD "select data from settings where value='SaveTranscoding';" | sed '/[0-9]/!d'` = 1 ]; then
+        echo "DB is set to save transcodeing"
+        mv $VIDEODIR/$FILENAME $VIDEODIR/$FILENAME.old
+    fi
+    mv $TMPFILE $VIDEODIR/$FILENAME
+
+    # file has changed, rebuild index
+    echo "Rebuilding index..."
+    update_comment "Rebuilding index..."
+    mythcommflag -c $CHANID -s $STARTTIME --rebuild
+    ERROR=$?
+    if [ $ERROR -ne 0 ]; then
+        echo "Rebuilding seek list failed for ${FILENAME} with error $ERROR"
+        exit $ERROR
+    fi
+
+    # remove old cutlist
+    echo "Removing old cutlist..."
+    update_comment "Removing old cutlist..."
+    mythcommflag -c $CHANID -s $STARTTIME --clearcutlist
+    ERROR=$?
+    if [ $ERROR -eq 0 ]; then
+        # Fix the database entry for the file
+        `$SQLCMD UPDATE recorded SET cutlist = 0, filesize = $(ls -l $VIDEODIR/$FILENAME | awk '{print $5}') WHERE basename = '$FILENAME';` > /dev/null
+    else
+        echo "Clearing cutlist failed for ${FILENAME} with error $ERROR"
+        exit $ERROR
+    fi
+    clean_up_files
+    echo "Commercials Removed"
+    update_status 272
+    update_comment "Sucessfully Completed." 
+else
+    echo "No cutlist found."
+fi
-- 
cgit v0.12


From 2187f9f2d598ba7fb6e7f73dffcb66630dc8bc77 Mon Sep 17 00:00:00 2001
From: Bob Igo <bob@stormlogic.com>
Date: Mon, 3 Aug 2009 14:53:12 -0400
Subject: First attempt at integrating removecommercials user job script

---
 abs/core-testing/tweaker/bin/twk_general.pl | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/abs/core-testing/tweaker/bin/twk_general.pl b/abs/core-testing/tweaker/bin/twk_general.pl
index f181310..4a18f1e 100755
--- a/abs/core-testing/tweaker/bin/twk_general.pl
+++ b/abs/core-testing/tweaker/bin/twk_general.pl
@@ -363,7 +363,9 @@ sub implement_option {
 	    change_or_make_setting('JobAllowCommFlag', '1');
 	    change_or_make_setting('JobAllowTranscode', '1');
 	    change_or_make_setting('JobAllowUserJob1', '1');
-	    change_or_make_setting('JobAllowUserJob2', '2');
+	    change_or_make_setting('JobAllowUserJob2', '1');
+	    change_or_make_setting('JobAllowUserJob3', '1');
+	    change_or_make_setting('JobAllowUserJob4', '1');
 	    change_or_make_setting('JobQueueCPU','0');
 	    change_or_make_setting('JobQueueCheckFrequency','60');
 	    change_or_make_setting('JobQueueCommFlagCommand','mythcommflag');
@@ -405,13 +407,14 @@ sub implement_option {
 	    change_or_make_setting('StartupSecsBeforeRecording', '120');
 	    change_or_make_setting('TruncateDeletesSlowly', '1');
 	    change_or_make_setting('UseOutputPictureControls', '1');
-	    change_or_make_setting('UserJob2', 'myth2x264 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
-	    change_or_make_setting('UserJob3', 'myth2xvid \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
-	    change_or_make_setting('UserJob4', 'myth2mp3 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\"');
-	    change_or_make_setting('UserJobDesc1', 'User Job #1');
-	    change_or_make_setting('UserJobDesc2', 'Transcode for iPod');
-	    change_or_make_setting('UserJobDesc3', 'Transcode to xvid');
-	    change_or_make_setting('UserJobDesc4', 'Extract audio');
+	    change_or_make_setting('UserJob1', 'myth2ipod \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+	    change_or_make_setting('UserJob2', 'myt2xvid3 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+	    change_or_make_setting('UserJob3', 'myth2x264 \"%DIR%/%FILE%\" \"%TITLE% - %SUBTITLE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+	    change_or_make_setting('UserJob4', 'removecommercials \"%DIR%\" \"%FILE%\" \"%CHANID%\" \"%STARTTIME%\" \"%JOBID%\"');
+	    change_or_make_setting('UserJobDesc1', 'Transcode for iPod');
+	    change_or_make_setting('UserJobDesc2', 'Transcode to xvid');
+	    change_or_make_setting('UserJobDesc3', 'Transcode to h264');
+	    change_or_make_setting('UserJobDesc4', 'Remove Commercials');
 	    change_or_make_setting('UseOutputPictureControls','0'); # If this is set to '1' it can swap blue for red (and vice versa) on some nVidia GPUs
 	    change_or_make_setting('VCDPlayerCommand', 'mplayer-wrapper.pl vcd:\/\/ -cdrom-device %d -fs -zoom');
 	    change_or_make_setting('VideoArtworkDir', "$SQL_DirVideo/.covers");
-- 
cgit v0.12


From 979bfc6dd4ad276693ee17c87933cbe73ed4d57b Mon Sep 17 00:00:00 2001
From: Bob Igo <bob@stormlogic.com>
Date: Mon, 3 Aug 2009 14:54:01 -0400
Subject: Someone synced an older mythappletrailers build; bumped to re-build

---
 abs/extra-testing/mythappletrailers/PKGBUILD | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/abs/extra-testing/mythappletrailers/PKGBUILD b/abs/extra-testing/mythappletrailers/PKGBUILD
index b6ce459..a740fe5 100644
--- a/abs/extra-testing/mythappletrailers/PKGBUILD
+++ b/abs/extra-testing/mythappletrailers/PKGBUILD
@@ -3,7 +3,7 @@
 
 pkgname=mythappletrailers
 pkgver=0.04.3
-pkgrel=23
+pkgrel=24
 pkgdesc="Unofficial Add-on for MythTV to get Apple.com Movie Trailers."
 arch=('i686' 'x86_64')
 license=('GPL2')
-- 
cgit v0.12


From 120212bdd438d98c52aaab5b43443258be81a7e4 Mon Sep 17 00:00:00 2001
From: Bob Igo <bob@stormlogic.com>
Date: Mon, 3 Aug 2009 14:55:11 -0400
Subject: bumped ver to rebuild

---
 abs/core-testing/tweaker/PKGBUILD | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/abs/core-testing/tweaker/PKGBUILD b/abs/core-testing/tweaker/PKGBUILD
index 43ca495..75c893a 100644
--- a/abs/core-testing/tweaker/PKGBUILD
+++ b/abs/core-testing/tweaker/PKGBUILD
@@ -1,6 +1,6 @@
 pkgname=tweaker
 pkgver=1
-pkgrel=48
+pkgrel=49
 pkgdesc="applies tweaks to the baseline configuration and attempts to optimize settings for the hardware it finds"
 arch=('i686' 'x86_64')
 
-- 
cgit v0.12