From 00b131694e084a6deb9caaca2d940c63b9990384 Mon Sep 17 00:00:00 2001
From: James Meyer <james.meyer@operamail.com>
Date: Tue, 7 Aug 2012 12:55:03 -0500
Subject: php: 5.4.5

---
 abs/core/php/PKGBUILD              |  472 ++++++++-----
 abs/core/php/__changelog           |   15 -
 abs/core/php/apache.conf           |   10 +-
 abs/core/php/db4-test.patch        |   11 -
 abs/core/php/logrotate.d.php-fpm   |    8 +
 abs/core/php/php-fpm.conf.in.patch |   52 ++
 abs/core/php/php-fpm.install       |    9 +
 abs/core/php/php-fpm.service       |   13 +
 abs/core/php/php-fpm.tmpfiles      |    1 +
 abs/core/php/php.ini               | 1304 ------------------------------------
 abs/core/php/php.ini.patch         |  122 ++++
 abs/core/php/php.install           |   75 ---
 abs/core/php/rc.d.php-fpm          |  144 ++++
 13 files changed, 672 insertions(+), 1564 deletions(-)
 delete mode 100644 abs/core/php/__changelog
 delete mode 100644 abs/core/php/db4-test.patch
 create mode 100644 abs/core/php/logrotate.d.php-fpm
 create mode 100644 abs/core/php/php-fpm.conf.in.patch
 create mode 100644 abs/core/php/php-fpm.install
 create mode 100644 abs/core/php/php-fpm.service
 create mode 100644 abs/core/php/php-fpm.tmpfiles
 delete mode 100644 abs/core/php/php.ini
 create mode 100644 abs/core/php/php.ini.patch
 delete mode 100644 abs/core/php/php.install
 create mode 100644 abs/core/php/rc.d.php-fpm

diff --git a/abs/core/php/PKGBUILD b/abs/core/php/PKGBUILD
index 394f495..19e1b66 100644
--- a/abs/core/php/PKGBUILD
+++ b/abs/core/php/PKGBUILD
@@ -1,187 +1,347 @@
+# $Id: PKGBUILD 163752 2012-07-19 05:20:23Z pierre $
+# Maintainer: Pierre Schmitz <pierre@archlinux.de>
+
 pkgbase=php
-pkgname=('php' 'php-cgi' 'php-pear')
-pkgver=5.3.3
-pkgrel=8
-_suhosinver=${pkgver}-0.9.10
-pkgdesc='A high-level scripting language'
+pkgname=('php'
+         'php-cgi'
+         'php-apache'
+         'php-fpm'
+         'php-embed'
+         'php-pear'
+         'php-enchant'
+         'php-gd'
+         'php-intl'
+         'php-ldap'
+         'php-mcrypt'
+         'php-mssql'
+         'php-odbc'
+         'php-pgsql'
+         'php-pspell'
+         'php-snmp'
+         'php-sqlite'
+         'php-tidy'
+         'php-xsl')
+pkgver=5.4.5
+pkgrel=1
 arch=('i686' 'x86_64')
 license=('PHP')
 url='http://www.php.net'
-backup=('etc/php/php.ini')
-install=php.install
-depends=('glibc' 'readline' 'ncurses' 'libxml2' 'pcre')
-#makedepends=('apache' 'imap' 'postgresql-libs' 'mysql' 'libldap' \
-#             'libpng' 'libjpeg' 'sqlite3' 'unixodbc' 'net-snmp' \
-#       	'libmcrypt' 'tidyhtml' 'aspell' 'libtool' 'freetype2' 'libjpeg' \
-#             'curl' 'libxslt' 'pam' 'openssl' 'bzip2' 'gdbm' 'db>=4.7')
-
-makedepends=('mysql' 'libpng' 'libjpeg' 'sqlite3' 'libmcrypt' 'libtool' \
-             'freetype2' 'libjpeg' 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' \
-             'gdbm' 'db>=4.8.26')
-options=('emptydirs')
-source=("http://museum.php.net/php5/${pkgname}-${pkgver}.tar.bz2" \
-        "http://download.suhosin.org/suhosin-patch-${_suhosinver}.patch.gz" \
-        'php.ini' 'apache.conf')
+makedepends=('apache' 'imap' 'postgresql-libs' 'libldap' 'postfix' 'libvpx'
+             'sqlite' 'unixodbc' 'net-snmp' 'libzip' 'enchant' 'file' 'freetds'
+             'libmcrypt' 'tidyhtml' 'aspell' 'libltdl' 'libpng' 'libjpeg' 'icu'
+             'curl' 'libxslt' 'openssl' 'bzip2' 'db' 'gmp' 'freetype2')
+source=("http://www.php.net/distributions/${pkgbase}-${pkgver}.tar.bz2"
+        'php.ini.patch' 'apache.conf' 'rc.d.php-fpm' 'php-fpm.conf.in.patch'
+        'logrotate.d.php-fpm' 'php-fpm.service' 'php-fpm.tmpfiles')
+md5sums=('ffcc7f4dcf2b79d667fe0c110e6cb724'
+         '0b0bc7a917fc592bdf11dcd3c5c255e9'
+         'dec2cbaad64e3abf4f0ec70e1de4e8e9'
+         '6d46667e00d65933ec0c958279c0a803'
+         '825e580dd5708d959b50944afa1b12b6'
+         'f56b5bb7e93c802ae8519182fbea3387'
+         '86c73d481f3099e740e602869bacf637'
+         'c60343df74f8e1afb13b084d5c0e47ed')
 
 build() {
-	phpconfig="--srcdir=${srcdir}/${pkgbase}-${pkgver} \
-        --prefix=/usr \
-	--sysconfdir=/etc/php \
-	--with-layout=GNU \
-	--with-config-file-path=/etc/php \
-	--with-config-file-scan-dir=/etc/php/conf.d \
-	--enable-inline-optimization \
-	--disable-debug \
-	--disable-rpath \
-	--disable-static \
-	--enable-shared \
-        --mandir=/usr/share/man \
-        --without-pear \
-	"
-
-	phpextensions="--with-openssl=shared \
-	--with-zlib=shared \
-	--enable-bcmath=shared \
-	--with-bz2=shared \
-	--enable-calendar=shared \
-	--with-curl=shared \
-	--enable-dba=shared \
-	--without-db2 \
-	--without-db3 \
-	--with-db4=shared \
-	--with-gdbm=shared \
-	--enable-exif=shared \
-	--enable-ftp=shared \
-	--with-gd=shared \
-	--enable-gd-native-ttf \
-	--with-jpeg-dir=shared,/usr \
-	--with-png-dir=shared,/usr \
-	--with-gettext=shared \
-	--without-imap \
-	--without-imap-ssl \
-	--without-ldap \
-	--enable-mbstring=shared \
-	--with-mcrypt=shared \
-	--with-mysql=shared \
-	--with-mysql-sock=/tmp/mysql.sock \
-	--with-mysql=shared \
-	--with-mysqli=shared \
-	--without-unixODBC \
-	--enable-pdo=shared \
-	--with-pdo-mysql=shared \
-	--with-pdo-sqlite=shared \
-	--without-pdo-odbc \
-	--without-pdo-pgsql \
-	--with-sqlite=shared \
-	--without-pgsql \
-	--enable-shmop=shared \
-	--without-snmp \
-	--enable-soap=shared \
-	--enable-sqlite-utf8=shared \
-	--enable-sysvmsg=shared \
-	--enable-sysvsem=shared \
-	--enable-sysvshm=shared \
-	--without-tidy \
-	--with-xsl=shared \
-	--enable-zip=shared \
-	--enable-posix=shared \
-	--enable-sockets=shared \
-	--enable-xml \
-	--enable-session=shared \
-	--with-regex=php \
-	--with-pcre-regex=/usr \
-	--enable-mbstring=all \
-	--enable-mbregex \
-	--enable-json=shared \
-	--with-iconv=shared \
-	--with-xmlrpc=shared \
-	--without-pspell \
-	--with-freetype-dir=shared,/usr \
-	"
-        EXTENSION_DIR=/usr/lib/php/modules
-        export EXTENSION_DIR
-        PEAR_INSTALLDIR=/usr/share/pear
-        export PEAR_INSTALLDIR
+	phpconfig="--srcdir=../${pkgbase}-${pkgver} \
+		--config-cache \
+		--prefix=/usr \
+		--sysconfdir=/etc/php \
+		--localstatedir=/var \
+		--with-layout=GNU \
+		--with-config-file-path=/etc/php \
+		--with-config-file-scan-dir=/etc/php/conf.d \
+		--disable-rpath \
+		--mandir=/usr/share/man \
+		--without-pear \
+		"
+
+	phpextensions="--enable-bcmath=shared \
+		--enable-calendar=shared \
+		--enable-dba=shared \
+		--enable-exif=shared \
+		--enable-ftp=shared \
+		--enable-gd-native-ttf \
+		--enable-intl=shared \
+		--enable-mbstring \
+		--enable-phar=shared \
+		--enable-posix=shared \
+		--enable-shmop=shared \
+		--enable-soap=shared \
+		--enable-sockets=shared \
+		--enable-sysvmsg=shared \
+		--enable-sysvsem=shared \
+		--enable-sysvshm=shared \
+		--enable-zip=shared \
+		--with-bz2=shared \
+		--with-curl=shared \
+		--with-db4=/usr \
+		--with-enchant=shared,/usr \
+		--with-freetype-dir=/usr \
+		--with-gd=shared \
+		--with-gdbm \
+		--with-gettext=shared \
+		--with-gmp=shared \
+		--with-iconv=shared \
+		--with-icu-dir=/usr \
+		--with-imap-ssl \
+		--with-imap=shared \
+		--with-jpeg-dir=/usr \
+		--with-vpx-dir=/usr \
+		--with-ldap=shared \
+		--with-ldap-sasl \
+		--with-mcrypt=shared \
+		--with-mhash \
+		--with-mssql=shared \
+		--with-mysql-sock=/var/run/mysqld/mysqld.sock \
+		--with-mysql=shared,mysqlnd \
+		--with-mysqli=shared,mysqlnd \
+		--with-openssl=shared \
+		--with-pcre-regex=/usr \
+		--with-pdo-mysql=shared,mysqlnd \
+		--with-pdo-odbc=shared,unixODBC,/usr \
+		--with-pdo-pgsql=shared \
+		--with-pdo-sqlite=shared,/usr \
+		--with-pgsql=shared \
+		--with-png-dir=/usr \
+		--with-pspell=shared \
+		--with-snmp=shared \
+		--with-sqlite3=shared,/usr \
+		--with-tidy=shared \
+		--with-unixODBC=shared,/usr \
+		--with-xmlrpc=shared \
+		--with-xsl=shared \
+		--with-zlib \
+		"
+
+	EXTENSION_DIR=/usr/lib/php/modules
+	export EXTENSION_DIR
+	PEAR_INSTALLDIR=/usr/share/pear
+	export PEAR_INSTALLDIR
 
 	cd ${srcdir}/${pkgbase}-${pkgver}
 
-	# apply suhosin patch
-	patch -p1 -i ${srcdir}/suhosin-patch-${_suhosinver}.patch || return 1
+	# adjust paths
+	patch -p0 -i ${srcdir}/php.ini.patch
+	patch -p0 -i ${srcdir}/php-fpm.conf.in.patch
 
 	# php
-        mkdir ${srcdir}/build-php
-        cd ${srcdir}/build-php
-        ln -s ../${pkgbase}-${pkgver}/configure
+	mkdir ${srcdir}/build-php
+	cd ${srcdir}/build-php
+	ln -s ../${pkgbase}-${pkgver}/configure
 	./configure ${phpconfig} \
 		--disable-cgi \
 		--with-readline \
 		--enable-pcntl \
-		${phpextensions} || return 1
-	make || return 1
+		${phpextensions}
+	make
 
 	# cgi and fcgi
-        cp -a ${srcdir}/build-php ${srcdir}/build-cgi
-        cd ${srcdir}/build-cgi
+	# reuse the previous run; this will save us a lot of time
+	cp -a ${srcdir}/build-php ${srcdir}/build-cgi
+	cd ${srcdir}/build-cgi
+	./configure ${phpconfig} \
+		--disable-cli \
+		--enable-cgi \
+		${phpextensions}
+	make
+
+	# apache
+	cp -a ${srcdir}/build-php ${srcdir}/build-apache
+	cd ${srcdir}/build-apache
+	./configure ${phpconfig} \
+		--disable-cli \
+		--with-apxs2 \
+		${phpextensions}
+	make
+
+	# fpm
+	cp -a ${srcdir}/build-php ${srcdir}/build-fpm
+	cd ${srcdir}/build-fpm
+	./configure ${phpconfig} \
+		--disable-cli \
+		--enable-fpm \
+		--with-fpm-user=http \
+		--with-fpm-group=http \
+		${phpextensions}
+	make
+
+	# embed
+	cp -a ${srcdir}/build-php ${srcdir}/build-embed
+	cd ${srcdir}/build-embed
 	./configure ${phpconfig} \
-                --disable-cli \
-                --enable-cgi \
-		${phpextensions} || return 1
-	make || return 1
-
-        # pear
-        cp -a ${srcdir}/build-php ${srcdir}/build-pear
-        cd ${srcdir}/build-pear
-        ./configure ${phpconfig} \
-                --disable-cgi \
-                --with-readline \
-                --enable-pcntl \
-                --with-pear \
-                ${phpextensions}
-        make || return 1
+		--disable-cli \
+		--enable-embed=shared \
+		${phpextensions}
+	make
+
+	# pear
+	cp -a ${srcdir}/build-php ${srcdir}/build-pear
+	cd ${srcdir}/build-pear
+	./configure ${phpconfig} \
+		--disable-cgi \
+		--with-readline \
+		--enable-pcntl \
+		--with-pear \
+		${phpextensions}
+	make
 }
 
+# check() {
+# 	cd ${srcdir}/build-php
+# 	make test
+# }
+
 package_php() {
-        pkgdesc='An HTML-embedded scripting language'
-        depends=('pcre' 'libxml2' 'bzip2' 'openssl')
-        replaces=('php')
-        provides=('php')
-        backup=('etc/php/php.ini')
+	pkgdesc='An HTML-embedded scripting language'
+	depends=('pcre' 'libxml2' 'bzip2' 'curl')
+	replaces=('php-fileinfo' 'php-gmp' 'php-curl')
+	provides=('php-fileinfo' 'php-gmp' 'php-curl')
+	conflicts=('php-fileinfo' 'php-gmp' 'php-curl')
+	backup=('etc/php/php.ini')
 
 	cd ${srcdir}/build-php
-	make INSTALL_ROOT=${pkgdir} install || return 1
-        install -d -m755 ${pkgdir}/usr/share/pear
-        # fix broken link
-        ln -sf phar.phar $pkgdir/usr/bin/phar
-        # install php.ini
-        install -D -m644 ${srcdir}/php.ini ${pkgdir}/etc/php/php.ini
-        install -d -m755 ${pkgdir}/etc/php/conf.d/
+	make -j1 INSTALL_ROOT=${pkgdir} install
+	install -d -m755 ${pkgdir}/usr/share/pear
+	# install php.ini
+	install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/php.ini-production ${pkgdir}/etc/php/php.ini
+	install -d -m755 ${pkgdir}/etc/php/conf.d/
 
-        # remove static modules
-        rm -f ${pkgdir}/usr/lib/php/modules/*.a
-        # remove modules provided by sub packages
-        rm -f ${pkgdir}/usr/lib/php/modules/{curl,enchant,gd,gmp,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so
+	# remove static modules
+	rm -f ${pkgdir}/usr/lib/php/modules/*.a
+	# remove modules provided by sub packages
+	rm -f ${pkgdir}/usr/lib/php/modules/{enchant,gd,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so
+	# remove empty directory
+	rmdir ${pkgdir}/usr/include/php/include
 }
 
 package_php-cgi() {
-        pkgdesc='CGI and FCGI SAPI for PHP'
-        depends=('php' 'pcre' 'libxml2')
+	pkgdesc='CGI and FCGI SAPI for PHP'
+	depends=('php')
 
-        install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi
+	install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi
+}
+
+package_php-apache() {
+	pkgdesc='Apache SAPI for PHP'
+	depends=('php' 'apache')
+	backup=('etc/httpd/conf/extra/php5_module.conf')
+
+	install -D -m755 ${srcdir}/build-apache/libs/libphp5.so ${pkgdir}/usr/lib/httpd/modules/libphp5.so
+	install -D -m644 ${srcdir}/apache.conf ${pkgdir}/etc/httpd/conf/extra/php5_module.conf
+}
+
+package_php-fpm() {
+	pkgdesc='FastCGI Process Manager for PHP'
+	depends=('php')
+	backup=('etc/php/php-fpm.conf')
+	install='php-fpm.install'
+
+	install -D -m755 ${srcdir}/build-fpm/sapi/fpm/php-fpm ${pkgdir}/usr/sbin/php-fpm
+	install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.8 ${pkgdir}/usr/share/man/man8/php-fpm.8
+	install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.conf ${pkgdir}/etc/php/php-fpm.conf
+	install -D -m755 ${srcdir}/rc.d.php-fpm ${pkgdir}/etc/rc.d/php-fpm
+	install -D -m644 ${srcdir}/logrotate.d.php-fpm ${pkgdir}/etc/logrotate.d/php-fpm
+	install -d -m755 ${pkgdir}/etc/php/fpm.d
+	install -D -m644 ${srcdir}/php-fpm.tmpfiles ${pkgdir}/usr/lib/tmpfiles.d/php-fpm.conf
+	install -D -m644 ${srcdir}/php-fpm.service ${pkgdir}/usr/lib/systemd/system/php-fpm.service
+}
+
+package_php-embed() {
+	pkgdesc='Embed SAPI for PHP'
+	depends=('php')
+
+	install -D -m755 ${srcdir}/build-embed/libs/libphp5.so ${pkgdir}/usr/lib/libphp5.so
+	install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/sapi/embed/php_embed.h ${pkgdir}/usr/include/php/sapi/embed/php_embed.h
 }
 
 package_php-pear() {
-        pkgdesc='PHP Extension and Application Repository'
-        depends=('php' 'bash')
-        backup=('etc/php/pear.conf')
-
-        cd ${srcdir}/build-pear
-        make install-pear INSTALL_ROOT=${pkgdir} || return 1
-        local i
-        while read i; do
-                [ ! -e "$i" ] || rm -rf "$i"
-        done < <(find ${pkgdir} -name '.*')
-}
-md5sums=('21ceeeb232813c10283a5ca1b4c87b48'
-         'b66b27c43b1332400ef8982944c3b95b'
-         '25bf81e701f7914a3d8472a5636640e7'
-         '96ca078be6729b665be8a865535a97bf')
+	pkgdesc='PHP Extension and Application Repository'
+	depends=('php')
+	backup=('etc/php/pear.conf')
+
+	cd ${srcdir}/build-pear
+	make install-pear INSTALL_ROOT=${pkgdir}
+	rm -rf ${pkgdir}/usr/share/pear/.{channels,depdb,depdblock,filemap,lock,registry}
+}
+
+package_php-enchant() {
+	depends=('php' 'enchant')
+	pkgdesc='enchant module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/enchant.so ${pkgdir}/usr/lib/php/modules/enchant.so
+}
+
+package_php-gd() {
+	depends=('php' 'libpng' 'libjpeg' 'freetype2' 'libvpx')
+	pkgdesc='gd module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/gd.so ${pkgdir}/usr/lib/php/modules/gd.so
+}
+
+package_php-intl() {
+	depends=('php' 'icu')
+	pkgdesc='intl module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/intl.so ${pkgdir}/usr/lib/php/modules/intl.so
+}
+
+package_php-ldap() {
+	depends=('php' 'libldap')
+	pkgdesc='ldap module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/ldap.so ${pkgdir}/usr/lib/php/modules/ldap.so
+}
+
+package_php-mcrypt() {
+	depends=('php' 'libmcrypt' 'libltdl')
+	pkgdesc='mcrypt module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/mcrypt.so ${pkgdir}/usr/lib/php/modules/mcrypt.so
+}
+
+package_php-mssql() {
+	depends=('php' 'freetds')
+	pkgdesc='mssql module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/mssql.so ${pkgdir}/usr/lib/php/modules/mssql.so
+}
+
+package_php-odbc() {
+	depends=('php' 'unixodbc')
+	pkgdesc='ODBC modules for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/odbc.so ${pkgdir}/usr/lib/php/modules/odbc.so
+	install -D -m755 ${srcdir}/build-php/modules/pdo_odbc.so ${pkgdir}/usr/lib/php/modules/pdo_odbc.so
+}
+
+package_php-pgsql() {
+	depends=('php' 'postgresql-libs')
+	pkgdesc='PostgreSQL modules for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/pgsql.so ${pkgdir}/usr/lib/php/modules/pgsql.so
+	install -D -m755 ${srcdir}/build-php/modules/pdo_pgsql.so ${pkgdir}/usr/lib/php/modules/pdo_pgsql.so
+}
+
+package_php-pspell() {
+	depends=('php' 'aspell')
+	pkgdesc='pspell module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/pspell.so ${pkgdir}/usr/lib/php/modules/pspell.so
+}
+
+package_php-snmp() {
+	depends=('php' 'net-snmp')
+	pkgdesc='snmp module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/snmp.so ${pkgdir}/usr/lib/php/modules/snmp.so
+}
+
+package_php-sqlite() {
+	depends=('php' 'sqlite')
+	pkgdesc='sqlite module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/sqlite3.so ${pkgdir}/usr/lib/php/modules/sqlite3.so
+	install -D -m755 ${srcdir}/build-php/modules/pdo_sqlite.so ${pkgdir}/usr/lib/php/modules/pdo_sqlite.so
+}
+
+package_php-tidy() {
+	depends=('php' 'tidyhtml')
+	pkgdesc='tidy module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/tidy.so ${pkgdir}/usr/lib/php/modules/tidy.so
+}
+
+package_php-xsl() {
+	depends=('php' 'libxslt')
+	pkgdesc='xsl module for PHP'
+	install -D -m755 ${srcdir}/build-php/modules/xsl.so ${pkgdir}/usr/lib/php/modules/xsl.so
+}
diff --git a/abs/core/php/__changelog b/abs/core/php/__changelog
deleted file mode 100644
index 754dc7c..0000000
--- a/abs/core/php/__changelog
+++ /dev/null
@@ -1,15 +0,0 @@
-modified php.ini
-set base dir to /data/srv/httpd/htdocs
-added /data/srv/tmp to basedir
-added /usr/share/mythtv/mythweather/scripts/
-send errors to stderr 
-change .install file, timezone is modified on install
-php.ini -jm
-	remove open_basedir
-
-split package into "php" "php-cgi" and "php-pear" -mh
-php-pear replaces PearLog -mh
-
-php.ini:  mysql.default_socket = /var/run/mysqld/mysqld.sock  Ref #753 -mh
-
-php.install: Change mysql.default_socket
diff --git a/abs/core/php/apache.conf b/abs/core/php/apache.conf
index 86344c8..c3ca0aa 100644
--- a/abs/core/php/apache.conf
+++ b/abs/core/php/apache.conf
@@ -3,7 +3,11 @@
 <IfModule dir_module>
 	<IfModule php5_module>
 		DirectoryIndex index.php index.html
-		AddHandler application/x-httpd-php .php
-		AddHandler application/x-httpd-php-source .phps
+		<FilesMatch "\.php$">
+			SetHandler application/x-httpd-php
+		</FilesMatch>
+		<FilesMatch "\.phps$">
+			SetHandler application/x-httpd-php-source
+		</FilesMatch>
 	</IfModule>
-</IfModule>
\ No newline at end of file
+</IfModule>
diff --git a/abs/core/php/db4-test.patch b/abs/core/php/db4-test.patch
deleted file mode 100644
index 2c0cb14..0000000
--- a/abs/core/php/db4-test.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- configure	2010-07-21 12:53:06.000000000 +0200
-+++ configure	2010-10-22 09:21:54.077666560 +0200
-@@ -30742,7 +30742,7 @@
- #include "confdefs.h"
- 
- #include "$THIS_INCLUDE"
--#if DB_VERSION_MINOR != 1 || (DB_VERSION_MINOR == 1 && DB_VERSION_PATCH >= 25)
-+#if DB_VERSION_MAJOR == 5 || DB_VERSION_MINOR != 1 || (DB_VERSION_MINOR == 1 && DB_VERSION_PATCH >= 25)
-       yes
- #endif
-     
diff --git a/abs/core/php/logrotate.d.php-fpm b/abs/core/php/logrotate.d.php-fpm
new file mode 100644
index 0000000..ac2d92a
--- /dev/null
+++ b/abs/core/php/logrotate.d.php-fpm
@@ -0,0 +1,8 @@
+/var/log/php-fpm.log {
+	missingok
+	notifempty
+	delaycompress
+	postrotate
+		kill -USR1 `cat /run/php-fpm/php-fpm.pid 2>/dev/null` 2>/dev/null || true
+	endscript
+}
diff --git a/abs/core/php/php-fpm.conf.in.patch b/abs/core/php/php-fpm.conf.in.patch
new file mode 100644
index 0000000..0b17182
--- /dev/null
+++ b/abs/core/php/php-fpm.conf.in.patch
@@ -0,0 +1,52 @@
+--- sapi/fpm/php-fpm.conf.in	2011-10-08 23:04:10.000000000 +0200
++++ sapi/fpm/php-fpm.conf.in	2012-03-01 19:50:48.549947258 +0100
+@@ -12,7 +12,7 @@
+ ; Relative path can also be used. They will be prefixed by:
+ ;  - the global prefix if it's been set (-p arguement)
+ ;  - @prefix@ otherwise
+-;include=etc/fpm.d/*.conf
++;include=/etc/php/fpm.d/*.conf
+ 
+ ;;;;;;;;;;;;;;;;;;
+ ; Global Options ;
+@@ -22,7 +22,7 @@
+ ; Pid file
+ ; Note: the default prefix is @EXPANDED_LOCALSTATEDIR@
+ ; Default Value: none
+-;pid = run/php-fpm.pid
++pid = /run/php-fpm/php-fpm.pid
+ 
+ ; Error log file
+ ; If it's set to "syslog", log is sent to syslogd instead of being written
+@@ -140,7 +140,8 @@
+ ;                            specific port;
+ ;   '/path/to/unix/socket' - to listen on a unix socket.
+ ; Note: This value is mandatory.
+-listen = 127.0.0.1:9000
++;listen = 127.0.0.1:9000
++listen = /run/php-fpm/php-fpm.sock
+ 
+ ; Set listen(2) backlog.
+ ; Default Value: 128 (-1 on FreeBSD and OpenBSD)
+@@ -151,9 +152,9 @@
+ ; BSD-derived systems allow connections regardless of permissions. 
+ ; Default Values: user and group are set as the running user
+ ;                 mode is set to 0666
+-;listen.owner = @php_fpm_user@
+-;listen.group = @php_fpm_group@
+-;listen.mode = 0666
++listen.owner = @php_fpm_user@
++listen.group = @php_fpm_group@
++listen.mode = 0660
+  
+ ; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+ ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+@@ -442,7 +443,7 @@
+ ; Chdir to this directory at the start.
+ ; Note: relative path can be used.
+ ; Default Value: current directory or / when chroot
+-;chdir = /var/www
++;chdir = /srv/http
+  
+ ; Redirect worker stdout and stderr into main error log. If not set, stdout and
+ ; stderr will be redirected to /dev/null according to FastCGI specs.
diff --git a/abs/core/php/php-fpm.install b/abs/core/php/php-fpm.install
new file mode 100644
index 0000000..41fc37c
--- /dev/null
+++ b/abs/core/php/php-fpm.install
@@ -0,0 +1,9 @@
+post_install() {
+	if [[ ! -d run/php-fpm ]]; then
+		usr/bin/systemd-tmpfiles --create usr/lib/tmpfiles.d/php-fpm.conf
+	fi
+}
+
+post_upgrade() {
+	post_install
+}
diff --git a/abs/core/php/php-fpm.service b/abs/core/php/php-fpm.service
new file mode 100644
index 0000000..e29f7c2
--- /dev/null
+++ b/abs/core/php/php-fpm.service
@@ -0,0 +1,13 @@
+[Unit]
+Description=FastCGI Process Manager for PHP
+After=syslog.target network.target
+
+[Service]
+Type=forking
+PIDFile=/run/php-fpm/php-fpm.pid
+PrivateTmp=true
+ExecStart=/usr/sbin/php-fpm
+ExecReload=/bin/kill -USR2 $MAINPID
+
+[Install]
+WantedBy=multi-user.target
diff --git a/abs/core/php/php-fpm.tmpfiles b/abs/core/php/php-fpm.tmpfiles
new file mode 100644
index 0000000..801e74f
--- /dev/null
+++ b/abs/core/php/php-fpm.tmpfiles
@@ -0,0 +1 @@
+d /run/php-fpm 755 root root
diff --git a/abs/core/php/php.ini b/abs/core/php/php.ini
deleted file mode 100644
index 50413b9..0000000
--- a/abs/core/php/php.ini
+++ /dev/null
@@ -1,1304 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini   ;
-;;;;;;;;;;;;;;;;;;;
-; This file controls many aspects of PHP's behavior.  In order for PHP to
-; read it, it must be named 'php.ini'.  PHP looks for it in the current
-; working directory, in the path designated by the environment variable
-; PHPRC, and in the path that was defined in compile time (in that order).
-; The path in which the php.ini file is looked for can be overridden using
-; the -c argument in command line mode.
-;
-; The syntax of the file is extremely simple.  Whitespace and Lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-;
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-;
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
-;
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; |        bitwise OR
-; &        bitwise AND
-; ~        bitwise NOT
-; !        boolean NOT
-;
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-;
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-;
-;  foo =         ; sets foo to an empty string
-;  foo = none    ; sets foo to an empty string
-;  foo = "none"  ; sets foo to the string 'none'
-;
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-;
-;
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; This is the recommended, PHP 5-style version of the php.ini-dist file.  It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-;
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with.  Using this
-; file is warmly recommended for production sites.  As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP.  Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_long_arrays = Off     [Performance]
-;     Disables registration of the older (and deprecated) long predefined array
-;     variables ($HTTP_*_VARS).  Instead, use the superglobals that were
-;     introduced in PHP 4.1.0
-; - display_errors = Off           [Security]
-;     With this directive set to off, errors that occur during the execution of
-;     scripts will no longer be displayed as a part of the script output, and thus,
-;     will no longer be exposed to remote users.  With some errors, the error message
-;     content may expose information about your script, web server, or database
-;     server that may be exploitable for hacking.  Production sites should have this
-;     directive set to off.
-; - log_errors = On                [Security]
-;     This directive complements the above one.  Any errors that occur during the
-;     execution of your script will be logged (typically, to your server's error log,
-;     but can be configured in several ways).  Along with setting display_errors to off,
-;     this setup gives you the ability to fully understand what may have gone wrong,
-;     without exposing any sensitive information to remote users.
-; - output_buffering = 4096        [Performance]
-;     Set a 4KB output buffer.  Enabling output buffering typically results in less
-;     writes, and sometimes less packets sent on the wire, which can often lead to
-;     better performance.  The gain this directive actually yields greatly depends
-;     on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off       [Performance]
-;     Disables registration of the somewhat redundant $argv and $argc global
-;     variables.
-; - magic_quotes_gpc = Off         [Performance]
-;     Input data is no longer escaped with slashes so that it can be sent into
-;     SQL databases without further manipulation.  Instead, you should use the
-;     function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS"       [Performance]
-;     The environment variables are not hashed into the $_ENV.  To access
-;     environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
-;     By default, PHP suppresses errors of type E_NOTICE.  These error messages
-;     are emitted for non-critical errors, but that could be a symptom of a bigger
-;     problem.  Most notably, this will cause error messages about the use
-;     of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off     [Code cleanliness]
-;     It's not possible to decide to force a variable to be passed by reference
-;     when calling a function.  The PHP 4 style to do this is by making the
-;     function require the relevant argument by reference.
-; - short_open_tag = Off           [Portability]
-;     Using short tags is discouraged when developing code meant for redistribution
-;     since short tags may not be supported on the target server.
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
-zend.ze1_compatibility_mode = Off
-
-; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision    =  14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit.  You can enable output buffering during runtime by calling the output
-; buffering functions.  You can also enable output buffering for all files by
-; setting this directive to On.  If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function.  For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-;       directive. Instead, explicitly set the output handler using ob_start().
-;       Using this ini directive may cause problems unless you know what script
-;       is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-;       and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-;       Instead you must use zlib.output_handler.
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-;       outputs chunks that are few hundreds bytes each as a result of
-;       compression. If you prefer a larger chunk size for better
-;       performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-;       output_handler, or otherwise the output will be corrupted.
-zlib.output_compression = Off
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block.  This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block.  Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time.  This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend.  The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration.  You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here.  By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note:  If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv().  These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below.  This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir = /data/srv/httpd/htdocs/:/home/:/tmp/:/usr/share/pear/:/data/srv/tmp:/usr/share/mythtv/mythweather/scripts/:/data/srv/httpd/htdocs/mythweb/data/video:/myth/ipodfeed:/data/srv/httpd/htdocs/archive:/etc:/myth:/media
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode.  Anything that's acceptable in
-; <span style="color: ???????"> would work.
-;highlight.string  = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg      = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html    = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long request, which may end up
-; being interrupted by the user or a browser timing out.
-; ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; realpath_cache_size=16k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; realpath_cache_ttl=120
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header).  It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = Off
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30     ; Maximum execution time of each script, in seconds
-max_input_time = 60	; Maximum amount of time each script may spend parsing request data
-;max_input_nesting_level = 64 ; Maximum input variable nesting level
-memory_limit = 64M      ; Maximum amount of memory a script may consume (32MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field.  Or each number up to get desired error
-; reporting level
-; E_ALL             - All errors and warnings (doesn't include E_STRICT)
-; E_ERROR           - fatal run-time errors
-; E_RECOVERABLE_ERROR  - almost fatal run-time errors
-; E_WARNING         - run-time warnings (non-fatal errors)
-; E_PARSE           - compile-time parse errors
-; E_NOTICE          - run-time notices (these are warnings which often result
-;                     from a bug in your code, but it's possible that it was
-;                     intentional (e.g., using an uninitialized variable and
-;                     relying on the fact it's automatically initialized to an
-;                     empty string)
-; E_STRICT          - run-time notices, enable to have PHP suggest changes
-;                     to your code which will ensure the best interoperability
-;                     and forward compatibility of your code
-; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
-;                     initial startup
-; E_COMPILE_ERROR   - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR      - user-generated error message
-; E_USER_WARNING    - user-generated warning message
-; E_USER_NOTICE     - user-generated notice message
-;
-; Examples:
-;
-;   - Show all errors, except for notices and coding standards warnings
-;
-error_reporting = E_ALL & ~E_NOTICE
-;
-;   - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
-;
-;   - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
-;
-;   - Show all errors, except coding standards warnings
-;
-error_reporting  =  E_ALL
-
-; Print out errors (as a part of the output).  For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below).  Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-;
-; possible values for display_errors:
-;
-; Off          - Do not display any errors 
-; stderr       - Display errors to STDERR (affects only CGI/CLI binaries!)
-; On or stdout - Display errors to STDOUT (default)
-;
-; To output errors to STDERR with CGI/CLI:
-display_errors = "stderr"
-;
-; Default
-;
-;display_errors = on
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed.  It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = Off
-
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-; Note: Never use this feature for production boxes.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-; Note: Never use this feature for production boxes.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog.
-error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC).  Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables.  You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.  This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on;  Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; Whether or not to register the old-style input arrays, HTTP_GET_VARS
-; and friends.  If you're not using them, it's recommended to turn them off,
-; for performance reasons.
-register_long_arrays = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information).  If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; When enabled, the SERVER and ENV variables are created when they're first
-; used (Just In Time) instead of when the script starts. If these variables
-; are not used within a script, having this directive on will result in a
-; performance gain. The PHP directives register_globals, register_long_arrays,
-; and register_argc_argv must be disabled for this directive to have any affect.
-auto_globals_jit = On
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header.  To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-include_path = ".:/usr/share/pear"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues.  The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-extension_dir = "/usr/lib/php/modules/"
-
-; Whether or not to enable the dl() function.  The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 2M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = on
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-allow_url_include = on
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the User-Agent string
-; user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-;   extension=modulename.extension
-;
-; For example, under UNIX:
-;
-;   extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here.  Specify the location of the extension with the
-; extension_dir directive above.
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Date]
-; Defines the default timezone used by the date functions
-;date.timezone =
-
-;date.default_latitude = 31.7667
-;date.default_longitude = 35.2333
-
-;date.sunrise_zenith = 90.583333
-;date.sunset_zenith = 90.583333
-
-[filter]
-;filter.default = unsafe_raw
-;filter.default_flags =
-
-[iconv]
-;iconv.input_encoding = ISO-8859-1
-;iconv.internal_encoding = ISO-8859-1
-;iconv.output_encoding = ISO-8859-1
-
-[sqlite]
-;sqlite.assoc_case = 0
-
-[xmlrpc]
-;xmlrpc_error_number = 0
-;xmlrpc_errors = 0
-
-[Pcre]
-;PCRE library backtracking limit.
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-;pcre.recursion_limit=100000
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables  = Off
-
-[mail function]
-; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail(), even in safe mode.
-;mail.force_extra_parameters =
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db    =  Not yet implemented
-;odbc.default_user  =  Not yet implemented
-;odbc.default_pw    =  Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields.  Returns number of bytes to variables.  0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect().  If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).
-mysql.default_port =
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket = /var/run/mysqld/mysqld.sock
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[MySQLi]
-
-; Maximum number of links.  -1 means no limit.
-mysqli.max_links = -1
-
-; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).
-mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysqli.default_pw =
-
-; Allow or prevent reconnect
-mysqli.reconnect = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-msql.max_links = -1
-
-[OCI8]
-; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-;oci8.ping_interval = 60
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-;oci8.default_prefetch = 10
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-;oci8.old_oci_close_semantics = Off
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links.  -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings.  This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns.  May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1.  In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler.  In the case of files, this is the path
-; where data files are stored.
-;
-; As of PHP 4.0.1, you can define the path as:
-;
-;     session.save_path = "N;/path"
-;
-; where N is an integer.  Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories.  This is useful if you
-; or your OS have problems with lots of files in one directory, and is
-; a more efficient layout for servers that handle lots of sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-;         You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-;         use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-;     session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-session.save_path = "/tmp"
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-;session.cookie_secure =
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-session.cookie_httponly =
-
-; Handler used to serialize data.  php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor     = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-;       (see session.save_path above), then garbage collection does *not*
-;       happen automatically.  You will need to do your own garbage
-;       collection through a shell script, cron entry, or some other method.
-;       For example, the following script would is the equivalent of
-;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-;          cd /path/to/sessions; find -cmin +24 | xargs rm
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-;   to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-;   in publically accessible computer.
-; - User may access your site with the same session ID
-;   always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; Select a hash function
-; 0: MD5   (128 bits)
-; 1: SHA-1 (160 bits)
-session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-;
-; 4 bits: 0-9, a-f
-; 5 bits: 0-9, a-v
-; 6 bits: 0-9, a-z, A-Z, "-", ","
-session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs.  If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatibility mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch.  0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. -1 = library default
-; msdlib defaults to 25
-; FreeTDS defaults to 4096
-;mssql.max_procs = -1
-
-; Specify client character set.
-; If empty or not set the client charset from freetds.comf is used
-; This is only used when compiled with FreeTDS
-;mssql.charset = "ISO-8859-1"
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting().  Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constant registrations
-;com.autoregister_verbose = true
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-;       portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-;mbstring.strict_encoding = Off
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.show_timestamp_decimals = Off
-;fbsql.default_database =
-;fbsql.default_database_password =
[REDACTED] =
-;fbsql.default_password =
[REDACTED] = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-
-[gd]
-; Tell the jpeg decode to libjpeg warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel    = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel    = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-soap.wsdl_cache_enabled=1
-; Sets the directory name where SOAP extension will put cache files.
-soap.wsdl_cache_dir="/tmp"
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-soap.wsdl_cache_ttl=86400
-
-
-; available extensions
-;
-;extension=bcmath.so
-;extension=bz2.so
-;extension=calendar.so
-;extension=curl.so
-;extension=dba.so
-;extension=dbase.so
-;extension=exif.so
-;extension=ftp.so
-;extension=gd.so
-extension=gettext.so
-;extension=iconv.so
-;extension=imap.so
-;extension=json.so
-;extension=ldap.so
-;extension=mcrypt.so
-;extension=mime_magic.so
-extension=mysql.so
-;extension=mysqli.so
-;extension=ncurses.so
-;extension=odbc.so
-;extension=openssl.so
-;extension=pdo.so
-;extension=pdo_mysql.so
-;extension=pdo_odbc.so
-;extension=pdo_pgsql.so
-;extension=pdo_sqlite.so
-;extension=pgsql.so
-extension=posix.so
-;extension=pspell.so
-extension=session.so
-;extension=shmop.so
-;extension=snmp.so
-;extension=soap.so
-;extension=sockets.so
-;extension=sqlite.so
-;extension=sysvmsg.so
-;extension=sysvsem.so
-;extension=sysvshm.so
-;extension=tidy.so
-;extension=xmlrpc.so
-;extension=xsl.so
-;extension=zip.so
-extension=zlib.so
-
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/abs/core/php/php.ini.patch b/abs/core/php/php.ini.patch
new file mode 100644
index 0000000..bbaae21
--- /dev/null
+++ b/abs/core/php/php.ini.patch
@@ -0,0 +1,122 @@
+--- php.ini-production	2012-03-29 06:17:59.000000000 +0200
++++ php.ini-production	2012-03-30 10:46:21.181340861 +0200
+@@ -305,7 +305,7 @@
+ ; or per-virtualhost web server configuration file. This directive is
+ ; *NOT* affected by whether Safe Mode is turned On or Off.
+ ; http://php.net/open-basedir
+-;open_basedir =
++open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
+ 
+ ; This directive allows you to disable certain functions for security reasons.
+ ; It receives a comma-delimited list of function names. This directive is
+@@ -702,7 +702,7 @@
+ ;;;;;;;;;;;;;;;;;;;;;;;;;
+ 
+ ; UNIX: "/path1:/path2"
+-;include_path = ".:/php/includes"
++include_path = ".:/usr/share/pear"
+ ;
+ ; Windows: "\path1;\path2"
+ ;include_path = ".;c:\php\includes"
+@@ -725,7 +725,7 @@
+ 
+ ; Directory in which the loadable extensions (modules) reside.
+ ; http://php.net/extension-dir
+-; extension_dir = "./"
++extension_dir = "/usr/lib/php/modules/"
+ ; On windows:
+ ; extension_dir = "ext"
+ 
+@@ -859,51 +859,47 @@
+ ; If you only provide the name of the extension, PHP will look for it in its
+ ; default extension directory.
+ ;
+-; Windows Extensions
+-; Note that ODBC support is built in, so no dll is needed for it.
+-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
+-; extension folders as well as the separate PECL DLL download (PHP 5).
+-; Be sure to appropriately set the extension_dir directive.
+-;
+-;extension=php_bz2.dll
+-;extension=php_curl.dll
+-;extension=php_fileinfo.dll
+-;extension=php_gd2.dll
+-;extension=php_gettext.dll
+-;extension=php_gmp.dll
+-;extension=php_intl.dll
+-;extension=php_imap.dll
+-;extension=php_interbase.dll
+-;extension=php_ldap.dll
+-;extension=php_mbstring.dll
+-;extension=php_exif.dll      ; Must be after mbstring as it depends on it
+-;extension=php_mysql.dll
+-;extension=php_mysqli.dll
+-;extension=php_oci8.dll      ; Use with Oracle 10gR2 Instant Client
+-;extension=php_oci8_11g.dll  ; Use with Oracle 11gR2 Instant Client
+-;extension=php_openssl.dll
+-;extension=php_pdo_firebird.dll
+-;extension=php_pdo_mysql.dll
+-;extension=php_pdo_oci.dll
+-;extension=php_pdo_odbc.dll
+-;extension=php_pdo_pgsql.dll
+-;extension=php_pdo_sqlite.dll
+-;extension=php_pgsql.dll
+-;extension=php_pspell.dll
+-;extension=php_shmop.dll
+-
+-; The MIBS data available in the PHP distribution must be installed. 
+-; See http://www.php.net/manual/en/snmp.installation.php 
+-;extension=php_snmp.dll
+-
+-;extension=php_soap.dll
+-;extension=php_sockets.dll
+-;extension=php_sqlite3.dll
+-;extension=php_sybase_ct.dll
+-;extension=php_tidy.dll
+-;extension=php_xmlrpc.dll
+-;extension=php_xsl.dll
+-;extension=php_zip.dll
++;extension=bcmath.so
++;extension=bz2.so
++;extension=calendar.so
++extension=curl.so
++;extension=dba.so
++;extension=enchant.so
++;extension=exif.so
++;extension=ftp.so
++;extension=gd.so
++extension=gettext.so
++;extension=gmp.so
++;extension=iconv.so
++;extension=imap.so
++;extension=intl.so
++;extension=ldap.so
++;extension=mcrypt.so
++;extension=mssql.so
++;extension=mysqli.so
++;extension=mysql.so
++;extension=odbc.so
++;extension=openssl.so
++;extension=pdo_mysql.so
++;extension=pdo_odbc.so
++;extension=pdo_pgsql.so
++;extension=pdo_sqlite.so
++;extension=pgsql.so
++;extension=phar.so
++;extension=posix.so
++;extension=pspell.so
++;extension=shmop.so
++;extension=snmp.so
++;extension=soap.so
++;extension=sockets.so
++;extension=sqlite3.so
++;extension=sysvmsg.so
++;extension=sysvsem.so
++;extension=sysvshm.so
++;extension=tidy.so
++;extension=xmlrpc.so
++;extension=xsl.so
++;extension=zip.so
+ 
+ ;;;;;;;;;;;;;;;;;;;
+ ; Module Settings ;
diff --git a/abs/core/php/php.install b/abs/core/php/php.install
deleted file mode 100644
index b040032..0000000
--- a/abs/core/php/php.install
+++ /dev/null
@@ -1,75 +0,0 @@
-post_install() {
-	# change mysql.default_socket for mythweb
-	sed -i 's/^mysql.default_socket.*$/mysql.default_socket = \/var\/run\/mysqld\/mysqld.sock/g' /etc/php/php.ini
-	if [ -f /etc/systemconfig ]
-	then
-		. /etc/systemconfig
-		if [ -f /etc/php/php.ini ]
-		then
-	       	    sed -i 's|^.*date.timezone.*$|date.timezone='${timezone}'|' /etc/php/php.ini
-		fi
-	fi
-}
-
-pre_upgrade() {
-  # we moved php.ini from /etc/ to /etc/php
-  # lets save the old file before pacman deletes it.
-  # can be removed later
-  if [ -f /etc/php.ini ] && [ $(vercmp '5.2.4-2' $2) -ge 0 ];then
-    echo 'Backing up old php.ini...'
-    mv /etc/php.ini /etc/php.ini.pacsave.tmp
-  fi
-}
-
-post_upgrade() {
-  post_install
-  echo '
-    ==> Review your php.ini
-
-    Your php installation has been updated. You should review your current
-    php.ini and check any upstream changes according to the default
-    configuration which can be found at php.ini.pacnew.
-    '
-  # if we upgraded from an installation with old config layout, move the old
-  # php.ini to the right place and inform the user about the changes.
-  # can be removed later
-  if [ -f /etc/php.ini.pacsave.tmp ] && [ $(vercmp '5.2.4-2' $2) -ge 0 ]; then
-    echo 'Restoring old php.ini...'
-    mv /etc/php/php.ini /etc/php/php.ini.pacnew
-    mv /etc/php.ini.pacsave.tmp /etc/php/php.ini
-    if [ -f /etc/systemconfig ]
-	then
-		. /etc/systemconfig
-		if [ -f /etc/php/php.ini ]
-		then
-	       	    sed -i 's|^.*date.timezone.*$|date.timezone='${timezone}'|' /etc/php/php.ini
-		fi
-	fi
-    echo 'Updating extension dir...'
-    sed -i -e 's/#extension_dir = "/usr/lib/php/20060613/"/#extension_dir = "/usr/lib/php/modules/"#g' /etc/php/php.ini
-    echo '
-    ==> Location of php.ini has changed
-
-    A previous configuration was found at /etc/php.ini. PHP stores its
-    configuration at /etc/php/ now. Your old php.ini was moved to
-    /etc/php/php.ini. You should merge your old file with the
-    default one that can be found at /etc/php/php.ini.pacnew.
-
-    Make sure to enable the modules you need. A lot of them are shared
-    objects now and not statically built into php.
-
-    External modules store their configuration in /etc/php/conf.d/. PHP
-    scans that directory for any ini files.
-    '
-  fi
-  # be nice to [testing] users and update php.ini to fix bug #8141.
-  # can be removed later
-  if [ $(vercmp '5.2.4-3' $2) -eq 0 ]; then
-    echo 'Updating extension dir...'
-    sed -i -e 's/#extension_dir = "/usr/lib/php/extensions/"/#extension_dir = "/usr/lib/php/20060613/"#g' /etc/php/php.ini
-  fi
-}
-
-op=$1
-shift
-[ "$(type -t "$op")" = "function" ] && $op "$@"
diff --git a/abs/core/php/rc.d.php-fpm b/abs/core/php/rc.d.php-fpm
new file mode 100644
index 0000000..47f0886
--- /dev/null
+++ b/abs/core/php/rc.d.php-fpm
@@ -0,0 +1,144 @@
+#!/bin/bash
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+
+wait_for_pid () {
+	try=0
+	while test $try -lt 35 ; do
+		case "$1" in
+			'created')
+			if [ -f "$2" ] ; then
+				try=''
+				break
+			fi
+			;;
+			'removed')
+			if [ ! -f "$2" ] ; then
+				try=''
+				break
+			fi
+			;;
+		esac
+
+		stat_append '.'
+		try=`expr $try + 1`
+		sleep 1
+	done
+}
+
+test_config() {
+	stat_busy 'Checking configuration'
+	if [ $(id -u) -ne 0 ]; then
+		stat_append '(This script must be run as root)'
+		stat_die
+	fi
+
+	if [ ! -r /etc/php/php-fpm.conf ]; then
+		stat_append '(/etc/php/php-fpm.conf not found)'
+		stat_die
+	fi
+
+	local test=$(/usr/sbin/php-fpm -t 2>&1)
+	if [ $? -gt 0 ]; then
+		stat_append '(error in /etc/php/php-fpm.conf)'
+		stat_die
+	elif echo $test | grep -qi 'error'; then
+		stat_append '(error in /etc/php/php.ini)'
+		stat_die
+	fi
+
+	stat_done
+}
+
+case "$1" in
+	start)
+		test_config
+		stat_busy 'Starting php-fpm'
+
+		/usr/sbin/php-fpm
+
+		if [ "$?" != 0 ] ; then
+			stat_fail
+			exit 1
+		fi
+
+		wait_for_pid created /run/php-fpm/php-fpm.pid
+
+		if [ -n "$try" ] ; then
+			stat_fail
+			exit 1
+		else
+			add_daemon php-fpm
+			stat_done
+		fi
+	;;
+
+	stop)
+		test_config
+		stat_busy 'Gracefully shutting down php-fpm'
+
+		if [ ! -r /run/php-fpm/php-fpm.pid ] ; then
+			stat_fail
+			exit 1
+		fi
+
+		kill -QUIT `cat /run/php-fpm/php-fpm.pid`
+
+		wait_for_pid removed /run/php-fpm/php-fpm.pid
+
+		if [ -n "$try" ] ; then
+			stat_fail
+			exit 1
+		else
+			rm_daemon php-fpm
+			stat_done
+		fi
+	;;
+
+	force-quit)
+		stat_busy 'Terminating php-fpm'
+
+		if [ ! -r /run/php-fpm/php-fpm.pid ] ; then
+			stat_fail
+			exit 1
+		fi
+
+		kill -TERM `cat /run/php-fpm/php-fpm.pid`
+
+		wait_for_pid removed /run/php-fpm/php-fpm.pid
+
+		if [ -n "$try" ] ; then
+			stat_fail
+			exit 1
+		else
+			rm_daemon php-fpm
+			stat_done
+		fi
+	;;
+
+	restart)
+		$0 stop
+		$0 start
+	;;
+
+	reload)
+		test_config
+		stat_busy 'Reload service php-fpm'
+
+		if [ ! -r /run/php-fpm/php-fpm.pid ] ; then
+			stat_fail
+			exit 1
+		fi
+
+		kill -USR2 `cat /run/php-fpm/php-fpm.pid`
+		stat_done
+	;;
+
+	*)
+		echo "usage: $0 {start|stop|force-quit|restart|reload|logrotate}"
+		exit 1
+	;;
+
+esac
-- 
cgit v0.12

