From 427e01961c6ed50ac990f5327d00a7e42c3a2a69 Mon Sep 17 00:00:00 2001 From: James Meyer Date: Thu, 1 Nov 2012 15:52:25 -0500 Subject: php: updated to 5.4.8 see __changelog for details on php.ini refs #857 --- abs/core/php/PKGBUILD | 474 ++++++++----- abs/core/php/__changelog | 31 +- abs/core/php/php-fpm.conf.in.patch | 10 +- abs/core/php/php-fpm.service | 4 +- abs/core/php/php.ini | 1304 ------------------------------------ abs/core/php/php.ini.patch | 40 +- abs/core/php/php.install | 14 + abs/core/php/rc.d.php-fpm | 2 +- 8 files changed, 399 insertions(+), 1480 deletions(-) delete mode 100644 abs/core/php/php.ini mode change 100644 => 100755 abs/core/php/php.ini.patch create mode 100755 abs/core/php/php.install diff --git a/abs/core/php/PKGBUILD b/abs/core/php/PKGBUILD index 404edc0..b1b4cdc 100644 --- a/abs/core/php/PKGBUILD +++ b/abs/core/php/PKGBUILD @@ -1,187 +1,349 @@ +# $Id: PKGBUILD 169306 2012-10-19 05:27:26Z pierre $ +# Maintainer: Pierre Schmitz + pkgbase=php -pkgname=('php' 'php-cgi' 'php-pear') -pkgver=5.3.3 -pkgrel=9 -_suhosinver=${pkgver}-0.9.10 -pkgdesc='A high-level scripting language' +pkgname=('php' + 'php-cgi' + 'php-apache' + 'php-fpm' + 'php-embed' + 'php-pear' + 'php-enchant' + 'php-gd' + 'php-intl' + 'php-ldap' + 'php-mcrypt' + 'php-mssql' + 'php-odbc' + 'php-pgsql' + 'php-pspell' + 'php-snmp' + 'php-sqlite' + 'php-tidy' + 'php-xsl') +pkgver=5.4.8 +pkgrel=1 arch=('i686' 'x86_64') license=('PHP') url='http://www.php.net' -backup=('etc/php/php.ini') -install=php.install -depends=('glibc' 'readline' 'ncurses' 'libxml2' 'pcre') -#makedepends=('apache' 'imap' 'postgresql-libs' 'mysql' 'libldap' \ -# 'libpng' 'libjpeg' 'sqlite3' 'unixodbc' 'net-snmp' \ -# 'libmcrypt' 'tidyhtml' 'aspell' 'libtool' 'freetype2' 'libjpeg' \ -# 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' 'gdbm' 'db>=4.7') - -makedepends=('mysql' 'libpng' 'libjpeg' 'sqlite3' 'libmcrypt' 'libtool' \ - 'freetype2' 'libjpeg' 'curl' 'libxslt' 'pam' 'openssl' 'bzip2' \ - 'gdbm' 'db>=4.8.26') -options=('emptydirs') -source=("http://museum.php.net/php5/${pkgname}-${pkgver}.tar.bz2" \ - "http://download.suhosin.org/suhosin-patch-${_suhosinver}.patch.gz" \ - 'php.ini' 'apache.conf') +makedepends=('apache' 'imap' 'postgresql-libs' 'libldap' 'libvpx' + 'sqlite' 'unixodbc' 'net-snmp' 'libzip' 'enchant' 'file' 'freetds' + 'libmcrypt' 'tidyhtml' 'aspell' 'libltdl' 'libpng' 'libjpeg' 'icu' + 'curl' 'libxslt' 'openssl' 'bzip2' 'db' 'gmp' 'freetype2') +source=("http://www.php.net/distributions/${pkgbase}-${pkgver}.tar.bz2" + 'php.ini.patch' 'apache.conf' 'rc.d.php-fpm' 'php-fpm.conf.in.patch' + 'logrotate.d.php-fpm' 'php-fpm.service' 'php-fpm.tmpfiles') build() { - phpconfig="--srcdir=${srcdir}/${pkgbase}-${pkgver} \ - --prefix=/usr \ - --sysconfdir=/etc/php \ - --with-layout=GNU \ - --with-config-file-path=/etc/php \ - --with-config-file-scan-dir=/etc/php/conf.d \ - --enable-inline-optimization \ - --disable-debug \ - --disable-rpath \ - --disable-static \ - --enable-shared \ - --mandir=/usr/share/man \ - --without-pear \ - " - - phpextensions="--with-openssl=shared \ - --with-zlib=shared \ - --enable-bcmath=shared \ - --with-bz2=shared \ - --enable-calendar=shared \ - --with-curl=shared \ - --enable-dba=shared \ - --without-db2 \ - --without-db3 \ - --with-db4=shared \ - --with-gdbm=shared \ - --enable-exif=shared \ - --enable-ftp=shared \ - --with-gd=shared \ - --enable-gd-native-ttf \ - --with-jpeg-dir=shared,/usr \ - --with-png-dir=shared,/usr \ - --with-gettext=shared \ - --without-imap \ - --without-imap-ssl \ - --without-ldap \ - --enable-mbstring=shared \ - --with-mcrypt=shared \ - --with-mysql=shared \ - --with-mysql-sock=/tmp/mysql.sock \ - --with-mysql=shared \ - --with-mysqli=shared \ - --without-unixODBC \ - --enable-pdo=shared \ - --with-pdo-mysql=shared \ - --with-pdo-sqlite=shared \ - --without-pdo-odbc \ - --without-pdo-pgsql \ - --with-sqlite=shared \ - --without-pgsql \ - --enable-shmop=shared \ - --without-snmp \ - --enable-soap=shared \ - --enable-sqlite-utf8=shared \ - --enable-sysvmsg=shared \ - --enable-sysvsem=shared \ - --enable-sysvshm=shared \ - --without-tidy \ - --with-xsl=shared \ - --enable-zip=shared \ - --enable-posix=shared \ - --enable-sockets=shared \ - --enable-xml \ - --enable-session=shared \ - --with-regex=php \ - --with-pcre-regex=/usr \ - --enable-mbstring=all \ - --enable-mbregex \ - --enable-json=shared \ - --with-iconv=shared \ - --with-xmlrpc=shared \ - --without-pspell \ - --with-freetype-dir=shared,/usr \ - " - EXTENSION_DIR=/usr/lib/php/modules - export EXTENSION_DIR - PEAR_INSTALLDIR=/usr/share/pear - export PEAR_INSTALLDIR + phpconfig="--srcdir=../${pkgbase}-${pkgver} \ + --config-cache \ + --prefix=/usr \ + --sysconfdir=/etc/php \ + --localstatedir=/var \ + --with-layout=GNU \ + --with-config-file-path=/etc/php \ + --with-config-file-scan-dir=/etc/php/conf.d \ + --disable-rpath \ + --mandir=/usr/share/man \ + --without-pear \ + " + + phpextensions="--enable-bcmath=shared \ + --enable-calendar=shared \ + --enable-dba=shared \ + --enable-exif=shared \ + --enable-ftp=shared \ + --enable-gd-native-ttf \ + --enable-intl=shared \ + --enable-mbstring \ + --enable-phar=shared \ + --enable-posix=shared \ + --enable-shmop=shared \ + --enable-soap=shared \ + --enable-sockets=shared \ + --enable-sysvmsg=shared \ + --enable-sysvsem=shared \ + --enable-sysvshm=shared \ + --enable-zip=shared \ + --with-bz2=shared \ + --with-curl=shared \ + --with-db4=/usr \ + --with-enchant=shared,/usr \ + --with-freetype-dir=/usr \ + --with-gd=shared \ + --with-gdbm \ + --with-gettext=shared \ + --with-gmp=shared \ + --with-iconv=shared \ + --with-icu-dir=/usr \ + --with-imap-ssl \ + --with-imap=shared \ + --with-jpeg-dir=/usr \ + --with-vpx-dir=/usr \ + --with-ldap=shared \ + --with-ldap-sasl \ + --with-mcrypt=shared \ + --with-mhash \ + --with-mssql=shared \ + --with-mysql-sock=/var/run/mysqld/mysqld.sock \ + --with-mysql=shared,mysqlnd \ + --with-mysqli=shared,mysqlnd \ + --with-openssl=shared \ + --with-pcre-regex=/usr \ + --with-pdo-mysql=shared,mysqlnd \ + --with-pdo-odbc=shared,unixODBC,/usr \ + --with-pdo-pgsql=shared \ + --with-pdo-sqlite=shared,/usr \ + --with-pgsql=shared \ + --with-png-dir=/usr \ + --with-pspell=shared \ + --with-snmp=shared \ + --with-sqlite3=shared,/usr \ + --with-tidy=shared \ + --with-unixODBC=shared,/usr \ + --with-xmlrpc=shared \ + --with-xsl=shared \ + --with-zlib \ + " + + EXTENSION_DIR=/usr/lib/php/modules + export EXTENSION_DIR + PEAR_INSTALLDIR=/usr/share/pear + export PEAR_INSTALLDIR cd ${srcdir}/${pkgbase}-${pkgver} - # apply suhosin patch - patch -p1 -i ${srcdir}/suhosin-patch-${_suhosinver}.patch || return 1 + # adjust paths + + patch -p0 -i ${srcdir}/php.ini.patch + patch -p0 -i ${srcdir}/php-fpm.conf.in.patch # php - mkdir ${srcdir}/build-php - cd ${srcdir}/build-php - ln -s ../${pkgbase}-${pkgver}/configure + mkdir ${srcdir}/build-php + cd ${srcdir}/build-php + ln -s ../${pkgbase}-${pkgver}/configure ./configure ${phpconfig} \ --disable-cgi \ --with-readline \ --enable-pcntl \ - ${phpextensions} || return 1 - make || return 1 + ${phpextensions} + make # cgi and fcgi - cp -a ${srcdir}/build-php ${srcdir}/build-cgi - cd ${srcdir}/build-cgi + # reuse the previous run; this will save us a lot of time + cp -a ${srcdir}/build-php ${srcdir}/build-cgi + cd ${srcdir}/build-cgi + ./configure ${phpconfig} \ + --disable-cli \ + --enable-cgi \ + ${phpextensions} + make + + # apache + cp -a ${srcdir}/build-php ${srcdir}/build-apache + cd ${srcdir}/build-apache ./configure ${phpconfig} \ - --disable-cli \ - --enable-cgi \ - ${phpextensions} || return 1 - make || return 1 - - # pear - cp -a ${srcdir}/build-php ${srcdir}/build-pear - cd ${srcdir}/build-pear - ./configure ${phpconfig} \ - --disable-cgi \ - --with-readline \ - --enable-pcntl \ - --with-pear \ - ${phpextensions} - make || return 1 + --disable-cli \ + --with-apxs2 \ + ${phpextensions} + make + + # fpm + cp -a ${srcdir}/build-php ${srcdir}/build-fpm + cd ${srcdir}/build-fpm + ./configure ${phpconfig} \ + --disable-cli \ + --enable-fpm \ + --with-fpm-user=http \ + --with-fpm-group=http \ + ${phpextensions} + make + + # embed + cp -a ${srcdir}/build-php ${srcdir}/build-embed + cd ${srcdir}/build-embed + ./configure ${phpconfig} \ + --disable-cli \ + --enable-embed=shared \ + ${phpextensions} + make + + # pear + cp -a ${srcdir}/build-php ${srcdir}/build-pear + cd ${srcdir}/build-pear + ./configure ${phpconfig} \ + --disable-cgi \ + --with-readline \ + --enable-pcntl \ + --with-pear \ + ${phpextensions} + make } +# check() { +# cd ${srcdir}/build-php +# make test +# } + package_php() { - pkgdesc='An HTML-embedded scripting language' - depends=('pcre' 'libxml2' 'bzip2' 'openssl') - replaces=('php') - provides=('php') - backup=('etc/php/php.ini') + pkgdesc='An HTML-embedded scripting language' + depends=('pcre' 'libxml2' 'bzip2' 'curl') + replaces=('php-fileinfo' 'php-gmp' 'php-curl') + provides=('php-fileinfo' 'php-gmp' 'php-curl') + conflicts=('php-fileinfo' 'php-gmp' 'php-curl') + backup=('etc/php/php.ini') + install='php.install' cd ${srcdir}/build-php - make INSTALL_ROOT=${pkgdir} install || return 1 - install -d -m755 ${pkgdir}/usr/share/pear - # fix broken link - ln -sf phar.phar $pkgdir/usr/bin/phar - # install php.ini - install -D -m644 ${srcdir}/php.ini ${pkgdir}/etc/php/php.ini - install -d -m755 ${pkgdir}/etc/php/conf.d/ + make -j1 INSTALL_ROOT=${pkgdir} install + install -d -m755 ${pkgdir}/usr/share/pear + # install php.ini + install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/php.ini-production ${pkgdir}/etc/php/php.ini + install -d -m755 ${pkgdir}/etc/php/conf.d/ - # remove static modules - rm -f ${pkgdir}/usr/lib/php/modules/*.a - # remove modules provided by sub packages - rm -f ${pkgdir}/usr/lib/php/modules/{curl,enchant,gd,gmp,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so + # remove static modules + rm -f ${pkgdir}/usr/lib/php/modules/*.a + # remove modules provided by sub packages + rm -f ${pkgdir}/usr/lib/php/modules/{enchant,gd,intl,ldap,mcrypt,mssql,odbc,pdo_odbc,pgsql,pdo_pgsql,pspell,snmp,sqlite3,pdo_sqlite,tidy,xsl}.so + # remove empty directory + rmdir ${pkgdir}/usr/include/php/include } package_php-cgi() { - pkgdesc='CGI and FCGI SAPI for PHP' - depends=('php' 'pcre' 'libxml2') + pkgdesc='CGI and FCGI SAPI for PHP' + depends=('php') - install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi + install -D -m755 ${srcdir}/build-cgi/sapi/cgi/php-cgi ${pkgdir}/usr/bin/php-cgi +} + +package_php-apache() { + pkgdesc='Apache SAPI for PHP' + depends=('php' 'apache') + backup=('etc/httpd/conf/extra/php5_module.conf') + + install -D -m755 ${srcdir}/build-apache/libs/libphp5.so ${pkgdir}/usr/lib/httpd/modules/libphp5.so + install -D -m644 ${srcdir}/apache.conf ${pkgdir}/etc/httpd/conf/extra/php5_module.conf +} + +package_php-fpm() { + pkgdesc='FastCGI Process Manager for PHP' + depends=('php') + backup=('etc/php/php-fpm.conf') + install='php-fpm.install' + + install -D -m755 ${srcdir}/build-fpm/sapi/fpm/php-fpm ${pkgdir}/usr/sbin/php-fpm + install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.8 ${pkgdir}/usr/share/man/man8/php-fpm.8 + install -D -m644 ${srcdir}/build-fpm/sapi/fpm/php-fpm.conf ${pkgdir}/etc/php/php-fpm.conf + install -D -m755 ${srcdir}/rc.d.php-fpm ${pkgdir}/etc/rc.d/php-fpm + install -D -m644 ${srcdir}/logrotate.d.php-fpm ${pkgdir}/etc/logrotate.d/php-fpm + install -d -m755 ${pkgdir}/etc/php/fpm.d + install -D -m644 ${srcdir}/php-fpm.tmpfiles ${pkgdir}/usr/lib/tmpfiles.d/php-fpm.conf + install -D -m644 ${srcdir}/php-fpm.service ${pkgdir}/usr/lib/systemd/system/php-fpm.service +} + +package_php-embed() { + pkgdesc='Embed SAPI for PHP' + depends=('php') + + install -D -m755 ${srcdir}/build-embed/libs/libphp5.so ${pkgdir}/usr/lib/libphp5.so + install -D -m644 ${srcdir}/${pkgbase}-${pkgver}/sapi/embed/php_embed.h ${pkgdir}/usr/include/php/sapi/embed/php_embed.h } package_php-pear() { - pkgdesc='PHP Extension and Application Repository' - depends=('php' 'bash') - backup=('etc/php/pear.conf') - - cd ${srcdir}/build-pear - make install-pear INSTALL_ROOT=${pkgdir} || return 1 - local i - while read i; do - [ ! -e "$i" ] || rm -rf "$i" - done < <(find ${pkgdir} -name '.*') -} -md5sums=('21ceeeb232813c10283a5ca1b4c87b48' - 'b66b27c43b1332400ef8982944c3b95b' - 'b210db564281600c42f8eaa264eac3a5' - '96ca078be6729b665be8a865535a97bf') + pkgdesc='PHP Extension and Application Repository' + depends=('php') + backup=('etc/php/pear.conf') + + cd ${srcdir}/build-pear + make install-pear INSTALL_ROOT=${pkgdir} + rm -rf ${pkgdir}/usr/share/pear/.{channels,depdb,depdblock,filemap,lock,registry} +} + +package_php-enchant() { + depends=('php' 'enchant') + pkgdesc='enchant module for PHP' + install -D -m755 ${srcdir}/build-php/modules/enchant.so ${pkgdir}/usr/lib/php/modules/enchant.so +} + +package_php-gd() { + depends=('php' 'libpng' 'libjpeg' 'freetype2' 'libvpx') + pkgdesc='gd module for PHP' + install -D -m755 ${srcdir}/build-php/modules/gd.so ${pkgdir}/usr/lib/php/modules/gd.so +} + +package_php-intl() { + depends=('php' 'icu') + pkgdesc='intl module for PHP' + install -D -m755 ${srcdir}/build-php/modules/intl.so ${pkgdir}/usr/lib/php/modules/intl.so +} + +package_php-ldap() { + depends=('php' 'libldap') + pkgdesc='ldap module for PHP' + install -D -m755 ${srcdir}/build-php/modules/ldap.so ${pkgdir}/usr/lib/php/modules/ldap.so +} + +package_php-mcrypt() { + depends=('php' 'libmcrypt' 'libltdl') + pkgdesc='mcrypt module for PHP' + install -D -m755 ${srcdir}/build-php/modules/mcrypt.so ${pkgdir}/usr/lib/php/modules/mcrypt.so +} + +package_php-mssql() { + depends=('php' 'freetds') + pkgdesc='mssql module for PHP' + install -D -m755 ${srcdir}/build-php/modules/mssql.so ${pkgdir}/usr/lib/php/modules/mssql.so +} + +package_php-odbc() { + depends=('php' 'unixodbc') + pkgdesc='ODBC modules for PHP' + install -D -m755 ${srcdir}/build-php/modules/odbc.so ${pkgdir}/usr/lib/php/modules/odbc.so + install -D -m755 ${srcdir}/build-php/modules/pdo_odbc.so ${pkgdir}/usr/lib/php/modules/pdo_odbc.so +} + +package_php-pgsql() { + depends=('php' 'postgresql-libs') + pkgdesc='PostgreSQL modules for PHP' + install -D -m755 ${srcdir}/build-php/modules/pgsql.so ${pkgdir}/usr/lib/php/modules/pgsql.so + install -D -m755 ${srcdir}/build-php/modules/pdo_pgsql.so ${pkgdir}/usr/lib/php/modules/pdo_pgsql.so +} + +package_php-pspell() { + depends=('php' 'aspell') + pkgdesc='pspell module for PHP' + install -D -m755 ${srcdir}/build-php/modules/pspell.so ${pkgdir}/usr/lib/php/modules/pspell.so +} + +package_php-snmp() { + depends=('php' 'net-snmp') + pkgdesc='snmp module for PHP' + install -D -m755 ${srcdir}/build-php/modules/snmp.so ${pkgdir}/usr/lib/php/modules/snmp.so +} + +package_php-sqlite() { + depends=('php' 'sqlite') + pkgdesc='sqlite module for PHP' + install -D -m755 ${srcdir}/build-php/modules/sqlite3.so ${pkgdir}/usr/lib/php/modules/sqlite3.so + install -D -m755 ${srcdir}/build-php/modules/pdo_sqlite.so ${pkgdir}/usr/lib/php/modules/pdo_sqlite.so +} + +package_php-tidy() { + depends=('php' 'tidyhtml') + pkgdesc='tidy module for PHP' + install -D -m755 ${srcdir}/build-php/modules/tidy.so ${pkgdir}/usr/lib/php/modules/tidy.so +} + +package_php-xsl() { + depends=('php' 'libxslt') + pkgdesc='xsl module for PHP' + install -D -m755 ${srcdir}/build-php/modules/xsl.so ${pkgdir}/usr/lib/php/modules/xsl.so +} +md5sums=('bb8c816a9299be8995255ef70c63b800' + 'f62b49e6da4a09a6dd307f82c89e2a43' + 'dec2cbaad64e3abf4f0ec70e1de4e8e9' + '3cfde0cc4ed09b55f1ce531437a4eb88' + '5c1f4c967b66ce3eaf819b46951dcbf5' + 'f56b5bb7e93c802ae8519182fbea3387' + 'f8b206cb8fecb05cb1ded8bee45633ff' + 'c60343df74f8e1afb13b084d5c0e47ed') diff --git a/abs/core/php/__changelog b/abs/core/php/__changelog index b3123e3..46f3ff3 100644 --- a/abs/core/php/__changelog +++ b/abs/core/php/__changelog @@ -1 +1,30 @@ -removed postfix for now as it doesn't compile +removed postfix +openbase_dir commented out +short_tags On + +==> check and make sure these are uncommented: + ==> "extension=mysql.so" + ==> "extension=gd.so" + ==> "extension=gettext.so" + ==> "extension=mcrypt.so" + ==> "extension=mysqli.so" + ==> "extension=session.so" + ==> "extension=sockets.so" + ==> "extension=openssl.so" + ==> "extension=ftp.so" + ==> "extension=zip.so" + + +syslog.error on + +php.install +post_upgrade & post_install + +if [ -f /etc/systemconfig ] +then + . /etc/systemconfig + if [ -f /etc/php/php.ini ] + then + sed -i 's|^.*date.timezone.*$|date.timezone='${timezone}'|' /etc/php/php.ini + fi +fi \ No newline at end of file diff --git a/abs/core/php/php-fpm.conf.in.patch b/abs/core/php/php-fpm.conf.in.patch index 0b17182..d618fca 100644 --- a/abs/core/php/php-fpm.conf.in.patch +++ b/abs/core/php/php-fpm.conf.in.patch @@ -1,5 +1,5 @@ ---- sapi/fpm/php-fpm.conf.in 2011-10-08 23:04:10.000000000 +0200 -+++ sapi/fpm/php-fpm.conf.in 2012-03-01 19:50:48.549947258 +0100 +--- sapi/fpm/php-fpm.conf.in 2012-08-15 06:26:05.000000000 +0200 ++++ sapi/fpm/php-fpm.conf.in 2012-08-16 14:17:41.809663595 +0200 @@ -12,7 +12,7 @@ ; Relative path can also be used. They will be prefixed by: ; - the global prefix if it's been set (-p arguement) @@ -18,7 +18,7 @@ ; Error log file ; If it's set to "syslog", log is sent to syslogd instead of being written -@@ -140,7 +140,8 @@ +@@ -148,7 +148,8 @@ ; specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. @@ -28,7 +28,7 @@ ; Set listen(2) backlog. ; Default Value: 128 (-1 on FreeBSD and OpenBSD) -@@ -151,9 +152,9 @@ +@@ -159,9 +160,9 @@ ; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0666 @@ -41,7 +41,7 @@ ; List of ipv4 addresses of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -@@ -442,7 +443,7 @@ +@@ -458,7 +459,7 @@ ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot diff --git a/abs/core/php/php-fpm.service b/abs/core/php/php-fpm.service index e29f7c2..fc5ead6 100644 --- a/abs/core/php/php-fpm.service +++ b/abs/core/php/php-fpm.service @@ -1,12 +1,12 @@ [Unit] -Description=FastCGI Process Manager for PHP +Description=The PHP FastCGI Process Manager After=syslog.target network.target [Service] Type=forking PIDFile=/run/php-fpm/php-fpm.pid PrivateTmp=true -ExecStart=/usr/sbin/php-fpm +ExecStart=/usr/sbin/php-fpm --daemonize --pid /run/php-fpm/php-fpm.pid ExecReload=/bin/kill -USR2 $MAINPID [Install] diff --git a/abs/core/php/php.ini b/abs/core/php/php.ini deleted file mode 100644 index 3f70777..0000000 --- a/abs/core/php/php.ini +++ /dev/null @@ -1,1304 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About php.ini ; -;;;;;;;;;;;;;;;;;;; -; This file controls many aspects of PHP's behavior. In order for PHP to -; read it, it must be named 'php.ini'. PHP looks for it in the current -; working directory, in the path designated by the environment variable -; PHPRC, and in the path that was defined in compile time (in that order). -; The path in which the php.ini file is looked for can be overridden using -; the -c argument in command line mode. -; -; The syntax of the file is extremely simple. Whitespace and Lines -; beginning with a semicolon are silently ignored (as you probably guessed). -; Section headers (e.g. [Foo]) are also silently ignored, even though -; they might mean something in the future. -; -; Directives are specified using the following syntax: -; directive = value -; Directive names are *case sensitive* - foo=bar is different from FOO=bar. -; -; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one -; of the INI constants (On, Off, True, False, Yes, No and None) or an expression -; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). -; -; Expressions in the INI file are limited to bitwise operators and parentheses: -; | bitwise OR -; & bitwise AND -; ~ bitwise NOT -; ! boolean NOT -; -; Boolean flags can be turned on using the values 1, On, True or Yes. -; They can be turned off using the values 0, Off, False or No. -; -; An empty string can be denoted by simply not writing anything after the equal -; sign, or by using the None keyword: -; -; foo = ; sets foo to an empty string -; foo = none ; sets foo to an empty string -; foo = "none" ; sets foo to the string 'none' -; -; If you use constants in your value, and these constants belong to a -; dynamically loaded extension (either a PHP extension or a Zend extension), -; you may only use these constants *after* the line that loads the extension. -; -; -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; This is the recommended, PHP 5-style version of the php.ini-dist file. It -; sets some non standard settings, that make PHP more efficient, more secure, -; and encourage cleaner coding. -; -; The price is that with these settings, PHP may be incompatible with some -; applications, and sometimes, more difficult to develop with. Using this -; file is warmly recommended for production sites. As all of the changes from -; the standard settings are thoroughly documented, you can go over each one, -; and decide whether you want to use it or not. -; -; For general information about the php.ini file, please consult the php.ini-dist -; file, included in your PHP distribution. -; -; This file is different from the php.ini-dist file in the fact that it features -; different values for several directives, in order to improve performance, while -; possibly breaking compatibility with the standard out-of-the-box behavior of -; PHP. Please make sure you read what's different, and modify your scripts -; accordingly, if you decide to use this file instead. -; -; - register_long_arrays = Off [Performance] -; Disables registration of the older (and deprecated) long predefined array -; variables ($HTTP_*_VARS). Instead, use the superglobals that were -; introduced in PHP 4.1.0 -; - display_errors = Off [Security] -; With this directive set to off, errors that occur during the execution of -; scripts will no longer be displayed as a part of the script output, and thus, -; will no longer be exposed to remote users. With some errors, the error message -; content may expose information about your script, web server, or database -; server that may be exploitable for hacking. Production sites should have this -; directive set to off. -; - log_errors = On [Security] -; This directive complements the above one. Any errors that occur during the -; execution of your script will be logged (typically, to your server's error log, -; but can be configured in several ways). Along with setting display_errors to off, -; this setup gives you the ability to fully understand what may have gone wrong, -; without exposing any sensitive information to remote users. -; - output_buffering = 4096 [Performance] -; Set a 4KB output buffer. Enabling output buffering typically results in less -; writes, and sometimes less packets sent on the wire, which can often lead to -; better performance. The gain this directive actually yields greatly depends -; on which Web server you're working with, and what kind of scripts you're using. -; - register_argc_argv = Off [Performance] -; Disables registration of the somewhat redundant $argv and $argc global -; variables. -; - magic_quotes_gpc = Off [Performance] -; Input data is no longer escaped with slashes so that it can be sent into -; SQL databases without further manipulation. Instead, you should use the -; function addslashes() on each input element you wish to send to a database. -; - variables_order = "GPCS" [Performance] -; The environment variables are not hashed into the $_ENV. To access -; environment variables, you can use getenv() instead. -; - error_reporting = E_ALL [Code Cleanliness, Security(?)] -; By default, PHP suppresses errors of type E_NOTICE. These error messages -; are emitted for non-critical errors, but that could be a symptom of a bigger -; problem. Most notably, this will cause error messages about the use -; of uninitialized variables to be displayed. -; - allow_call_time_pass_reference = Off [Code cleanliness] -; It's not possible to decide to force a variable to be passed by reference -; when calling a function. The PHP 4 style to do this is by making the -; function require the relevant argument by reference. -; - short_open_tag = Off [Portability] -; Using short tags is discouraged when developing code meant for redistribution -; since short tags may not be supported on the target server. - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -engine = On - -; Enable compatibility mode with Zend Engine 1 (PHP 4.x) -zend.ze1_compatibility_mode = Off - -; Allow the tags are recognized. -; NOTE: Using short tags should be avoided when developing applications or -; libraries that are meant for redistribution, or deployment on PHP -; servers which are not under your control, because short tags may not -; be supported on the target server. For portable, redistributable code, -; be sure not to use short tags. -short_open_tag = On - -; Allow ASP-style <% %> tags. -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -y2k_compliance = On - -; Output buffering allows you to send header lines (including cookies) even -; after you send body content, at the price of slowing PHP's output layer a -; bit. You can enable output buffering during runtime by calling the output -; buffering functions. You can also enable output buffering for all files by -; setting this directive to On. If you wish to limit the size of the buffer -; to a certain size - you can use a maximum number of bytes instead of 'On', as -; a value for this directive (e.g., output_buffering=4096). -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few hundreds bytes each as a result of -; compression. If you prefer a larger chunk size for better -; performance, enable output_buffering in addition. -; Note: You need to use zlib.output_handler instead of the standard -; output_handler, or otherwise the output will be corrupted. -zlib.output_compression = Off -;zlib.output_compression_level = -1 - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instantiated. -; A warning appears if the specified function is not defined, or if the -; function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func= - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 100 - -; Whether to enable the ability to force arguments to be passed by reference -; at function call time. This method is deprecated and is likely to be -; unsupported in future versions of PHP/Zend. The encouraged method of -; specifying which arguments should be passed by reference is in the function -; declaration. You're encouraged to try and turn this option Off and make -; sure your scripts work properly with it in order to ensure they will work -; with future versions of the language (you will receive a warning each time -; you use this feature, and the argument will be passed by value instead of by -; reference). -allow_call_time_pass_reference = Off - -; -; Safe Mode -; -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -;open_basedir = /data/srv/httpd/htdocs/:/home/:/tmp/:/usr/share/pear/:/data/srv/tmp:/usr/share/mythtv/mythweather/scripts/:/data/srv/httpd/htdocs/mythweb/data/video:/myth/ipodfeed:/data/srv/httpd/htdocs/archive:/etc:/myth:/media - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - -; If enabled, the request will be allowed to complete even if the user aborts -; the request. Consider enabling it if executing long request, which may end up -; being interrupted by the user or a browser timing out. -; ignore_user_abort = On - -; Determines the size of the realpath cache to be used by PHP. This value should -; be increased on systems where PHP opens many files to reflect the quantity of -; the file operations performed. -; realpath_cache_size=16k - -; Duration of time, in seconds for which to cache realpath information for a given -; file or directory. For systems with rarely changing files, consider increasing this -; value. -; realpath_cache_ttl=120 - -; -; Misc -; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -expose_php = Off - - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -max_execution_time = 30 ; Maximum execution time of each script, in seconds -max_input_time = 60 ; Maximum amount of time each script may spend parsing request data -;max_input_nesting_level = 64 ; Maximum input variable nesting level -memory_limit = 64M ; Maximum amount of memory a script may consume (32MB) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; error_reporting is a bit-field. Or each number up to get desired error -; reporting level -; E_ALL - All errors and warnings (doesn't include E_STRICT) -; E_ERROR - fatal run-time errors -; E_RECOVERABLE_ERROR - almost fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_STRICT - run-time notices, enable to have PHP suggest changes -; to your code which will ensure the best interoperability -; and forward compatibility of your code -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; -; Examples: -; -; - Show all errors, except for notices and coding standards warnings -; -error_reporting = E_ALL & ~E_NOTICE -; -; - Show all errors, except for notices -; -;error_reporting = E_ALL & ~E_NOTICE | E_STRICT -; -; - Show only errors -; -;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR -; -; - Show all errors, except coding standards warnings -; -error_reporting = E_ALL - -; Print out errors (as a part of the output). For production web sites, -; you're strongly encouraged to turn this feature off, and use error logging -; instead (see below). Keeping display_errors enabled on a production web site -; may reveal security information to end users, such as file paths on your Web -; server, your database schema or other information. -; -; possible values for display_errors: -; -; Off - Do not display any errors -; stderr - Display errors to STDERR (affects only CGI/CLI binaries!) -; On or stdout - Display errors to STDOUT (default) -; -; To output errors to STDERR with CGI/CLI: -display_errors = "stderr" -; -; Default -; -;display_errors = on - -; Even when display_errors is on, errors that occur during PHP's startup -; sequence are not displayed. It's strongly recommended to keep -; display_startup_errors off, except for when debugging. -display_startup_errors = Off - -; Log errors into a log file (server-specific log, stderr, or error_log (below)) -; As stated above, you're strongly advised to use error logging in place of -; error displaying on production web sites. -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line until ignore_repeated_source is set true. -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; source lines. -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -report_memleaks = Off - -;report_zend_debug = 0 - -; Store the last error/warning message in $php_errormsg (boolean). -track_errors = Off - -; Disable the inclusion of HTML tags in error messages. -; Note: Never use this feature for production boxes. -;html_errors = Off - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://www.php.net/docs.php -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. -; Note: Never use this feature for production boxes. -;docref_root = "/phpmanual/" -;docref_ext = .html - -; String to output before an error message. -;error_prepend_string = "" - -; String to output after an error message. -;error_append_string = "" - -; Log errors to specified file. -;error_log = filename - -; Log errors to syslog. -error_log = syslog - - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; -; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 - -; The separator used in PHP generated URLs to separate arguments. -; Default is "&". -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; Default is "&". -; NOTE: Every character in this directive is considered as separator! -;arg_separator.input = ";&" - -; This directive describes the order in which PHP registers GET, POST, Cookie, -; Environment and Built-in variables (G, P, C, E & S respectively, often -; referred to as EGPCS or GPC). Registration is done from left to right, newer -; values override older values. -variables_order = "GPCS" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. This makes most sense when coupled with track_vars - in which -; case you can access all of the GPC variables through the $HTTP_*_VARS[], -; variables. -; -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -register_globals = Off - -; Whether or not to register the old-style input arrays, HTTP_GET_VARS -; and friends. If you're not using them, it's recommended to turn them off, -; for performance reasons. -register_long_arrays = Off - -; This directive tells PHP whether to declare the argv&argc variables (that -; would contain the GET information). If you don't use these variables, you -; should turn it off for increased performance. -register_argc_argv = Off - -; When enabled, the SERVER and ENV variables are created when they're first -; used (Just In Time) instead of when the script starts. If these variables -; are not used within a script, having this directive on will result in a -; performance gain. The PHP directives register_globals, register_long_arrays, -; and register_argc_argv must be disabled for this directive to have any affect. -auto_globals_jit = On - -; Maximum size of POST data that PHP will accept. -post_max_size = 8M - -; Magic quotes -; - -; Magic quotes for incoming GET/POST/Cookie data. -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -magic_quotes_sybase = Off - -; Automatically add files before or after any PHP document. -auto_prepend_file = -auto_append_file = - -; As of 4.0b4, PHP always outputs a character encoding by default in -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -default_mimetype = "text/html" -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. -;always_populate_raw_post_data = On - - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -include_path = ".:/usr/share/pear" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -doc_root = - -; The directory under which PHP opens the script using /~username used only -; if nonempty. -user_dir = - -; Directory in which the loadable extensions (modules) reside. -extension_dir = "/usr/lib/php/modules/" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -enable_dl = Off - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. -; cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; cgi.redirect_status_env = ; - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is 1. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; fastcgi.impersonate = 1; - -; Disable logging through FastCGI connection -; fastcgi.logging = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -;cgi.rfc2616_headers = 0 - - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -upload_max_filesize = 2M - - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -allow_url_fopen = on - -; Whether to allow include/require to open URLs (like http:// or ftp://) as files. -allow_url_include = on - -; Define the anonymous ftp password (your email address) -;from="john@doe.com" - -; Define the User-Agent string -; user_agent="PHP" - -; Default timeout for socket based streams (seconds) -default_socket_timeout = 60 - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; -; -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, under UNIX: -; -; extension=msql.so -; -; Note that it should be the name of the module only; no directory information -; needs to go here. Specify the location of the extension with the -; extension_dir directive above. - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Date] -; Defines the default timezone used by the date functions -;date.timezone = - -;date.default_latitude = 31.7667 -;date.default_longitude = 35.2333 - -;date.sunrise_zenith = 90.583333 -;date.sunset_zenith = 90.583333 - -[filter] -;filter.default = unsafe_raw -;filter.default_flags = - -[iconv] -;iconv.input_encoding = ISO-8859-1 -;iconv.internal_encoding = ISO-8859-1 -;iconv.output_encoding = ISO-8859-1 - -[sqlite] -;sqlite.assoc_case = 0 - -[xmlrpc] -;xmlrpc_error_number = 0 -;xmlrpc_errors = 0 - -[Pcre] -;PCRE library backtracking limit. -;pcre.backtrack_limit=100000 - -;PCRE library recursion limit. -;Please note that if you set this value to a high number you may consume all -;the available process stack and eventually crash PHP (due to reaching the -;stack size limit imposed by the Operating System). -;pcre.recursion_limit=100000 - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -define_syslog_variables = Off - -[mail function] -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -;sendmail_path = - -; Force the addition of the specified parameters to be passed as extra parameters -; to the sendmail binary. These parameters will always replace the value of -; the 5th parameter to mail(), even in safe mode. -;mail.force_extra_parameters = - -[SQL] -sql.safe_mode = Off - -[ODBC] -;odbc.default_db = Not yet implemented -;odbc.default_user = Not yet implemented -;odbc.default_pw = Not yet implemented - -; Allow or prevent persistent links. -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of uodbc.defaultlrl and uodbc.defaultbinmode -odbc.defaultbinmode = 1 - -[MySQL] -; Allow or prevent persistent links. -mysql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysql.default_socket = /var/run/mysqld/mysqld.sock - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -mysql.trace_mode = Off - -[MySQLi] - -; Maximum number of links. -1 means no limit. -mysqli.max_links = -1 - -; Default port number for mysqli_connect(). If unset, mysqli_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). -mysqli.default_port = 3306 - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysqli.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysqli.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysqli.default_user = - -; Default password for mysqli_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysqli.default_pw = - -; Allow or prevent reconnect -mysqli.reconnect = Off - -[mSQL] -; Allow or prevent persistent links. -msql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -msql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -msql.max_links = -1 - -[OCI8] -; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA) -;oci8.privileged_connect = Off - -; Connection: The maximum number of persistent OCI8 connections per -; process. Using -1 means no limit. -;oci8.max_persistent = -1 - -; Connection: The maximum number of seconds a process is allowed to -; maintain an idle persistent connection. Using -1 means idle -; persistent connections will be maintained forever. -;oci8.persistent_timeout = -1 - -; Connection: The number of seconds that must pass before issuing a -; ping during oci_pconnect() to check the connection validity. When -; set to 0, each oci_pconnect() will cause a ping. Using -1 disables -; pings completely. -;oci8.ping_interval = 60 - -; Tuning: This option enables statement caching, and specifies how -; many statements to cache. Using 0 disables statement caching. -;oci8.statement_cache_size = 20 - -; Tuning: Enables statement prefetching and sets the default number of -; rows that will be fetched automatically after statement execution. -;oci8.default_prefetch = 10 - -; Compatibility. Using On means oci_close() will not close -; oci_connect() and oci_new_connect() connections. -;oci8.old_oci_close_semantics = Off - -[PostgresSQL] -; Allow or prevent persistent links. -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Noitce message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -pgsql.log_notice = 0 - -[Sybase] -; Allow or prevent persistent links. -sybase.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybase.max_links = -1 - -;sybase.interface_file = "/usr/sybase/interfaces" - -; Minimum error severity to display. -sybase.min_error_severity = 10 - -; Minimum message severity to display. -sybase.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -; If on, this will cause PHP to automatically assign types to results according -; to their Sybase type, instead of treating them all as strings. This -; compatibility mode will probably not stay around forever, so try applying -; whatever necessary changes to your code, and turn it off. -sybase.compatability_mode = Off - -[Sybase-CT] -; Allow or prevent persistent links. -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybct.max_links = -1 - -; Minimum server message severity to display. -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -sybct.min_client_severity = 10 - -[bcmath] -; Number of decimal digits for all bcmath functions. -bcmath.scale = 0 - -[browscap] -;browscap = extra/browscap.ini - -[Informix] -; Default host for ifx_connect() (doesn't apply in safe mode). -ifx.default_host = - -; Default user for ifx_connect() (doesn't apply in safe mode). -ifx.default_user = - -; Default password for ifx_connect() (doesn't apply in safe mode). -ifx.default_password = - -; Allow or prevent persistent links. -ifx.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ifx.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ifx.max_links = -1 - -; If on, select statements return the contents of a text blob instead of its id. -ifx.textasvarchar = 0 - -; If on, select statements return the contents of a byte blob instead of its id. -ifx.byteasvarchar = 0 - -; Trailing blanks are stripped from fixed-length char columns. May help the -; life of Informix SE users. -ifx.charasvarchar = 0 - -; If on, the contents of text and byte blobs are dumped to a file instead of -; keeping them in memory. -ifx.blobinfile = 0 - -; NULL's are returned as empty strings, unless this is set to 1. In that case, -; NULL's are returned as string 'NULL'. -ifx.nullformat = 0 - -[Session] -; Handler used to store/retrieve data. -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. -; -; As of PHP 4.0.1, you can define the path as: -; -; session.save_path = "N;/path" -; -; where N is an integer. Instead of storing all the session files in -; /path, what this will do is use subdirectories N-levels deep, and -; store the session data in those directories. This is useful if you -; or your OS have problems with lots of files in one directory, and is -; a more efficient layout for servers that handle lots of sessions. -; -; NOTE 1: PHP will not create this directory structure automatically. -; You can use the script in the ext/session dir for that purpose. -; NOTE 2: See the section on garbage collection below if you choose to -; use subdirectories for session storage -; -; The file storage module creates files using mode 600 by default. -; You can change that by using -; -; session.save_path = "N;MODE;/path" -; -; where MODE is the octal representation of the mode. Note that this -; does not overwrite the process's umask. -session.save_path = "/tmp" - -; Whether to use cookies. -session.use_cookies = 1 - -;session.cookie_secure = - -; This option enables administrators to make their users invulnerable to -; attacks which involve passing session ids in URLs; defaults to 0. -; session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -session.name = PHPSESSID - -; Initialize session on request startup. -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -session.cookie_path = / - -; The domain for which the cookie is valid. -session.cookie_domain = - -; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. -session.cookie_httponly = - -; Handler used to serialize data. php is the standard serializer of PHP. -session.serialize_handler = php - -; Define the probability that the 'garbage collection' process is started -; on every session initialization. -; The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts -; on each request. - -session.gc_probability = 1 -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -session.gc_maxlifetime = 1440 - -; NOTE: If you are using the subdirectory option for storing session files -; (see session.save_path above), then garbage collection does *not* -; happen automatically. You will need to do your own garbage -; collection through a shell script, cron entry, or some other method. -; For example, the following script would is the equivalent of -; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): -; cd /path/to/sessions; find -cmin +24 | xargs rm - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, albeit register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. - -session.bug_compat_42 = 0 -session.bug_compat_warn = 1 - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -session.referer_check = - -; How many bytes to read from the file. -session.entropy_length = 0 - -; Specified here to create the session id. -session.entropy_file = - -;session.entropy_length = 16 - -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects -; or leave this empty to avoid sending anti-caching headers. -session.cache_limiter = nocache - -; Document expires after n minutes. -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publically accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -session.use_trans_sid = 0 - -; Select a hash function -; 0: MD5 (128 bits) -; 1: SHA-1 (160 bits) -session.hash_function = 0 - -; Define how many bits are stored in each character when converting -; the binary hash data to something readable. -; -; 4 bits: 0-9, a-f -; 5 bits: 0-9, a-v -; 6 bits: 0-9, a-z, A-Z, "-", "," -session.hash_bits_per_character = 5 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatibility mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. -1 = library default -; msdlib defaults to 25 -; FreeTDS defaults to 4096 -;mssql.max_procs = -1 - -; Specify client character set. -; If empty or not set the client charset from freetds.comf is used -; This is only used when compiled with FreeTDS -;mssql.charset = "ISO-8859-1" - -[Assertion] -; Assert(expr); active by default. -;assert.active = On - -; Issue a PHP warning for each failed assertion. -;assert.warning = On - -; Don't bail out by default. -;assert.bail = Off - -; User-function to be called if an assertion fails. -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -;assert.quiet_eval = 0 - -[COM] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -;com.typelib_file = -; allow Distributed-COM calls -;com.allow_dcom = true -; autoregister constants of a components typlib on com_load() -;com.autoregister_typelib = true -; register constants casesensitive -;com.autoregister_casesensitive = false -; show warnings on duplicate constant registrations -;com.autoregister_verbose = true - -[mbstring] -; language for internal character representation. -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -;mbstring.http_output = SJIS - -; enable automatic encoding translation according to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -;mbstring.func_overload = 0 - -; enable strict encoding detection. -;mbstring.strict_encoding = Off - -[FrontBase] -;fbsql.allow_persistent = On -;fbsql.autocommit = On -;fbsql.show_timestamp_decimals = Off -;fbsql.default_database = -;fbsql.default_database_password = -;fbsql.default_host = -;fbsql.default_password = -;fbsql.default_user = "_SYSTEM" -;fbsql.generate_warnings = Off -;fbsql.max_connections = 128 -;fbsql.max_links = 128 -;fbsql.max_persistent = -1 -;fbsql.max_results = 128 - -[gd] -; Tell the jpeg decode to libjpeg warnings and try to create -; a gd image. The warning will then be displayed as notices -; disabled by default -;gd.jpeg_ignore_warning = 0 - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -;exif.encode_unicode = ISO-8859-15 -;exif.decode_unicode_motorola = UCS-2BE -;exif.decode_unicode_intel = UCS-2LE -;exif.encode_jis = -;exif.decode_jis_motorola = JIS -;exif.decode_jis_intel = JIS - -[Tidy] -; The path to a default tidy configuration file to use when using tidy -;tidy.default_config = /usr/local/lib/php/default.tcfg - -; Should tidy clean and repair output automatically? -; WARNING: Do not use this option if you are generating non-html content -; such as dynamic images -tidy.clean_output = Off - -[soap] -; Enables or disables WSDL caching feature. -soap.wsdl_cache_enabled=1 -; Sets the directory name where SOAP extension will put cache files. -soap.wsdl_cache_dir="/tmp" -; (time to live) Sets the number of second while cached file will be used -; instead of original one. -soap.wsdl_cache_ttl=86400 - - -; available extensions -; -;extension=bcmath.so -;extension=bz2.so -;extension=calendar.so -;extension=curl.so -;extension=dba.so -;extension=dbase.so -;extension=exif.so -;extension=ftp.so -;extension=gd.so -extension=gettext.so -;extension=iconv.so -;extension=imap.so -extension=json.so -;extension=ldap.so -;extension=mcrypt.so -;extension=mime_magic.so -extension=mysql.so -;extension=mysqli.so -;extension=ncurses.so -;extension=odbc.so -;extension=openssl.so -;extension=pdo.so -;extension=pdo_mysql.so -;extension=pdo_odbc.so -;extension=pdo_pgsql.so -;extension=pdo_sqlite.so -;extension=pgsql.so -extension=posix.so -;extension=pspell.so -extension=session.so -;extension=shmop.so -;extension=snmp.so -;extension=soap.so -;extension=sockets.so -;extension=sqlite.so -;extension=sysvmsg.so -;extension=sysvsem.so -;extension=sysvshm.so -;extension=tidy.so -;extension=xmlrpc.so -;extension=xsl.so -;extension=zip.so -extension=zlib.so - - -; Local Variables: -; tab-width: 4 -; End: diff --git a/abs/core/php/php.ini.patch b/abs/core/php/php.ini.patch old mode 100644 new mode 100755 index bbaae21..ed17c00 --- a/abs/core/php/php.ini.patch +++ b/abs/core/php/php.ini.patch @@ -1,14 +1,32 @@ ---- php.ini-production 2012-03-29 06:17:59.000000000 +0200 -+++ php.ini-production 2012-03-30 10:46:21.181340861 +0200 +--- php.ini-production.orig 2012-11-01 00:08:25.365008573 +0000 ++++ php.ini-production 2012-11-01 00:13:48.698332172 +0000 +@@ -208,7 +208,7 @@ + ; Development Value: Off + ; Production Value: Off + ; http://php.net/short-open-tag +-short_open_tag = Off ++short_open_tag = On + + ; Allow ASP-style <% %> tags. + ; http://php.net/asp-tags @@ -305,7 +305,7 @@ ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/open-basedir -;open_basedir = -+open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/ ++;open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/ ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is +@@ -583,7 +583,7 @@ + ; Example: + ;error_log = php_errors.log + ; Log errors to syslog (Event Log on NT, not valid in Windows 95). +-;error_log = syslog ++error_log = syslog + + ;windows.show_crt_warning + ; Default value: 0 @@ -702,7 +702,7 @@ ;;;;;;;;;;;;;;;;;;;;;;;;; @@ -83,20 +101,20 @@ +;extension=dba.so +;extension=enchant.so +;extension=exif.so -+;extension=ftp.so -+;extension=gd.so ++extension=ftp.so ++extension=gd.so +extension=gettext.so +;extension=gmp.so +;extension=iconv.so +;extension=imap.so +;extension=intl.so +;extension=ldap.so -+;extension=mcrypt.so ++extension=mcrypt.so +;extension=mssql.so -+;extension=mysqli.so -+;extension=mysql.so ++extension=mysqli.so ++extension=mysql.so +;extension=odbc.so -+;extension=openssl.so ++extension=openssl.so +;extension=pdo_mysql.so +;extension=pdo_odbc.so +;extension=pdo_pgsql.so @@ -108,7 +126,7 @@ +;extension=shmop.so +;extension=snmp.so +;extension=soap.so -+;extension=sockets.so ++extension=sockets.so +;extension=sqlite3.so +;extension=sysvmsg.so +;extension=sysvsem.so @@ -116,7 +134,7 @@ +;extension=tidy.so +;extension=xmlrpc.so +;extension=xsl.so -+;extension=zip.so ++extension=zip.so ;;;;;;;;;;;;;;;;;;; ; Module Settings ; diff --git a/abs/core/php/php.install b/abs/core/php/php.install new file mode 100755 index 0000000..772c0ea --- /dev/null +++ b/abs/core/php/php.install @@ -0,0 +1,14 @@ +post_install() { + if [ -f /etc/systemconfig ] + then + . /etc/systemconfig + if [ -f /etc/php/php.ini ] + then + sed -i 's|^.*date.timezone.*$|date.timezone='${timezone}'|' /etc/php/php.ini + fi + fi +} + +post_upgrade() { + post_install +} diff --git a/abs/core/php/rc.d.php-fpm b/abs/core/php/rc.d.php-fpm index 47f0886..a8cb9ec 100644 --- a/abs/core/php/rc.d.php-fpm +++ b/abs/core/php/rc.d.php-fpm @@ -57,7 +57,7 @@ case "$1" in test_config stat_busy 'Starting php-fpm' - /usr/sbin/php-fpm + /usr/sbin/php-fpm --daemonize --pid /run/php-fpm/php-fpm.pid if [ "$?" != 0 ] ; then stat_fail -- cgit v0.12