From 7a7490cd1120193f64e4fb1462ca61cdc2ec89ad Mon Sep 17 00:00:00 2001 From: James Meyer Date: Thu, 19 Mar 2009 20:18:32 -0500 Subject: LinHES-config: systemconfig.sh now supports both gnome and X screensaver. New Mythvantage to support either selection. --- abs/core-testing/LinHES-config/PKGBUILD | 2 +- abs/core-testing/LinHES-config/systemconfig.sh | 468 +++++++++++++++---------- 2 files changed, 279 insertions(+), 191 deletions(-) diff --git a/abs/core-testing/LinHES-config/PKGBUILD b/abs/core-testing/LinHES-config/PKGBUILD index 00addde..c1f1a14 100644 --- a/abs/core-testing/LinHES-config/PKGBUILD +++ b/abs/core-testing/LinHES-config/PKGBUILD @@ -1,6 +1,6 @@ pkgname=LinHES-config pkgver=1.0 -pkgrel=314 +pkgrel=340 conflicts=(MythVantage-config MythVantage-config-dev LinHES-config-dev ) pkgdesc="Install and configure your system" depends=(bc libstatgrab mysql-python expect curl dnsutils parted sg3_utils nmbscan system-templates ) diff --git a/abs/core-testing/LinHES-config/systemconfig.sh b/abs/core-testing/LinHES-config/systemconfig.sh index 16c51f3..ebc3489 100755 --- a/abs/core-testing/LinHES-config/systemconfig.sh +++ b/abs/core-testing/LinHES-config/systemconfig.sh @@ -23,7 +23,7 @@ PKGBLACKLIST=$BASE/etc/blacklist.package if [ x$1 = x"Mysql_only" ] then - rm -f /tmp/mysql.txt + rm -f /tmp/mysql.txt sed -e "s/^DBHostName=.*$/DBHostName=$2/" $TEMPLATES/mysql.txt > /tmp/mysql.txt exit 0 fi @@ -31,14 +31,14 @@ if [ x$1 = x"Mysql_only" ] if [ -f /etc/systemconfig ] then - . /etc/systemconfig + . /etc/systemconfig setup_MYTH_vars TEMPNET="Hostip"$default_interface echo $TEMPNET eval MYTHIP=\$${TEMPNET} else - echo "could not find /etc/systemconfig" - exit 1 + echo "could not find /etc/systemconfig" + exit 1 fi @@ -126,23 +126,23 @@ status=$? if [ $SystemType = "Standalone" ] - then + then sed -ie "s/^#skip-networking/skip-networking/g" $BASE/$MFILE if [ $status = 0 ] then sudo sv restart mysql - echo "restarting mysql with no network" + echo "restarting mysql with no network" fi fi if [ $SystemType = "Master_backend" ] then - sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE + sed -ie "s/^skip-networking/#skip-networking/g" $BASE/$MFILE if [ $status = 1 ] then sudo sv restart mysql - echo "restarting mysql with network" + echo "restarting mysql with network" fi fi @@ -162,25 +162,25 @@ echo $timezone ln -s "/usr/share/zoneinfo/$timezone" ${BASE}/etc/localtime sed -e "s~^TIMEZONE=.*$~TIMEZONE=\"${timezone}\"~" ${BASE}/etc/rc.conf > $TEMPLATES/rc.conf - # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock - # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock - # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock + # echo CLOCK="UTC" > ${BASE}/etc/conf.dclock + # echo CLOCK_SYSTOCH="yes" >> ${BASE}/etc/conf.d/clock + # echo TIMEZONE="$timezone" >> ${BASE}/etc/conf.d/clock cp_and_log $TEMPLATES/rc.conf ${BASE}/etc/rc.conf #Check for Atomic Ant - if grep disablemodules=agpart,intel_agp /proc/cmdline >/dev/null - then - cat /etc/rc.conf | sed -e '/MOD_BLACKLIST/ c\MOD_BLACKLIST=($ALSABLACKLIST agpart intel_agp)' > /etc/rc.conf.aa - mv /etc/rc.conf /etc/rc.conf.preaa - mv /etc/rc.conf.aa /etc/rc.conf +if grep disablemodules=agpart,intel_agp /proc/cmdline >/dev/null +then + cat /etc/rc.conf | sed -e '/MOD_BLACKLIST/ c\MOD_BLACKLIST=($ALSABLACKLIST agpart intel_agp)' > /etc/rc.conf.aa + mv /etc/rc.conf /etc/rc.conf.preaa + mv /etc/rc.conf.aa /etc/rc.conf # else # exit 1 - fi +fi } function setupreceiver { - case $ReceiverType in +case $ReceiverType in tinker) echo "do nothing" ;; Serial) echo "setup serial lirc" @@ -189,26 +189,26 @@ function setupreceiver { load-modules-mythvantage.sh ;; Usb-imon) echo "setup receiver-usb-imon" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage - load-modules-mythvantage.sh - ;; - Hauppauge) echo "setup hauppauge reciever (lirc_i2c)" - sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - echo "lirc_i2c #lirc" >> ${BASE}/etc/modules.mythvantage - cp_and_log $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf - rmmod lirc_i2c 2>/dev/null - load-modules-mythvantage.sh - ;; - *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage - ;; + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_imon #lirc" >> ${BASE}/etc/modules.mythvantage + load-modules-mythvantage.sh + ;; +Hauppauge) echo "setup hauppauge reciever (lirc_i2c)" + sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + echo "lirc_i2c #lirc" >> ${BASE}/etc/modules.mythvantage + cp_and_log $TEMPLATES/modules/lirc_i2c.conf ${BASE}/etc/modprobe.d/lirc_i2c.conf + rmmod lirc_i2c 2>/dev/null + load-modules-mythvantage.sh + ;; + *) sed -i -e '/.*#lirc/d' ${BASE}/etc/modules.mythvantage + ;; esac } function setupremote { - case $Remotetype in + case $Remotetype in no_remote) echo "No remote selected" daemon_remove="lircd $daemon_remove" ;; @@ -235,21 +235,21 @@ function setupremote { daemon_add="lircd $daemon_add" sv hup lircd - if [ ! -e /home/mythtv/.mythtv/lircrc ] - then - if [ ! -d /home/mythtv/.mythtv ] - then - mkdir /home/mythtv/.mythtv - chown mythtv:mythtv /home/mythtv/.mythtv - fi + if [ ! -e /home/mythtv/.mythtv/lircrc ] + then + if [ ! -d /home/mythtv/.mythtv ] + then + mkdir /home/mythtv/.mythtv + chown mythtv:mythtv /home/mythtv/.mythtv + fi - ln -s /etc/lircrc /home/mythtv/.mythtv/lircrc 2> /dev/null - fi - if [ ! -e /home/mythtv/.lircrc ] - then + ln -s /etc/lircrc /home/mythtv/.mythtv/lircrc 2> /dev/null + fi + if [ ! -e /home/mythtv/.lircrc ] + then - ln -s /etc/lircrc /home/mythtv/.lircrc 2> /dev/null - fi + ln -s /etc/lircrc /home/mythtv/.lircrc 2> /dev/null + fi ;; @@ -261,11 +261,11 @@ function setupblaster { #cd $TEMPLATES/transmit/$Blastertype #for i in lircd* #do - # cat lircd.conf >> ${BASE}/etc/lircd.conf + # cat lircd.conf >> ${BASE}/etc/lircd.conf #done - # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` - sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh - chmod 755 ${BASE}/usr/bin/change_chan.sh + # REMOTE_NAME${BASE}/usr/bin/change_chan.sh=`grep name lircd.conf* |awk -F" " ' { print $2 } '` + sed -e "s/^REMOTE_NAME=.*$/REMOTE_NAME=${Blastertype} /" $TEMPLATES/change_chan.sh > ${BASE}/usr/bin/change_chan.sh + chmod 755 ${BASE}/usr/bin/change_chan.sh #channel change script change setupremote @@ -297,7 +297,7 @@ function setupevrouter { } function setupLCD { - case x$LCDtype in +case x$LCDtype in xtinker) echo "do nothing" ;; xno_lcd) echo "disabling lcd" @@ -308,19 +308,19 @@ function setupLCD { ;; x) echo "empty lcd" ;; - *) echo "setup lcd" + *) echo "setup lcd" if [ -f $TEMPLATES/LCD/$LCDtype/modules ] then - sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage - cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage - #should also modprobe + sed -i -e '/.*#LCD/d' ${BASE}/etc/modules.mythvantage + cat $TEMPLATES/LCD/$LCDtype/modules >> ${BASE}/etc/modules.mythvantage + #should also modprobe fi if [ -f $TEMPLATES/LCD/$LCDtype/LCDd.conf ] then cp_and_log $TEMPLATES/LCD/$LCDtype/LCDd.conf /etc - # install="lcdproc $install" + # install="lcdproc $install" daemon_add="lcdd $daemon_add" load-modules-mythvantage.sh RESTART_FE="true" @@ -339,20 +339,20 @@ function setupLCD { function scrubnfs { - cp_and_log /etc/fstab $TEMPLATES/fstab.conf.template - grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab - } + cp_and_log /etc/fstab $TEMPLATES/fstab.conf.template + grep -v nfs $TEMPLATES/fstab.conf.template > ${BASE}/etc/fstab +} function setupfstab () { # setupfstab $NFSserver $NFSshare $NFSmount - echo "$1 $2 nfs" >> ${BASE}/etc/fstab - if [ ! -e "$2" ] - then - mkdir -p "$2" - chown mythtv:mythtv "$2" - fi - if [ x$DCONFIG = x ] - then + echo "$1 $2 nfs" >> ${BASE}/etc/fstab + if [ ! -e "$2" ] + then + mkdir -p "$2" + chown mythtv:mythtv "$2" + fi + if [ x$DCONFIG = x ] + then mount $2 & fi @@ -394,7 +394,7 @@ pkglistremove="" #default enabled for i in mythcontrols mythgallery mythmovietime mythmusic mythsmolt mythvideo do - eval pkgvalue=\$${i} + eval pkgvalue=\$${i} if [ x$pkgvalue = x ] then pkglistinstall="$pkglistinstall $i$postfix" @@ -474,17 +474,17 @@ remove="$pkglistremove $remove" } function LCDcheck () { - case x$LCDtype in +case x$LCDtype in xtinker) echo "do nothing lcd " ;; xno_lcd) echo "no lcd " - ;; + ;; xxosd) install="xosd lcdproc $install" ;; x) echo "lcd empty " ;; - *) - install="lcdproc $install" +*) + install="lcdproc $install" ;; esac } @@ -556,16 +556,16 @@ fi function daemons { echo "Daemons on boot" - for i in $daemon_remove - do - sv check $i 1>/dev/null + for i in $daemon_remove + do + sv check $i 1>/dev/null status=$? - if [ $status -eq 0 ] - then - sv down $i - fi - remove_service.sh $i - done + if [ $status -eq 0 ] + then + sv down $i + fi + remove_service.sh $i + done for i in $daemon_add @@ -574,8 +574,8 @@ echo "Daemons on boot" status=$? add_service.sh $i - if [ $status -eq 0 ] - then + if [ $status -eq 0 ] + then case $i in mysql*) sv hup $i ;; @@ -596,8 +596,8 @@ echo "Daemons on boot" sleep 1 sv up $i ;; - esac - fi + esac + fi done @@ -619,32 +619,32 @@ fi if [ x$RunDHCP = x1 ] then - ser_daemon_add="dnsmasq $ser_daemon_add" - ser_install="dnsmasq mvpmc $ser_install" + ser_daemon_add="dnsmasq $ser_daemon_add" + ser_install="dnsmasq mvpmc $ser_install" else - ser_daemon_remove="dnsmasq $ser_daemon_remove" - ser_remove="dnsmasq mvpmc $ser_remove" + ser_daemon_remove="dnsmasq $ser_daemon_remove" + ser_remove="dnsmasq mvpmc $ser_remove" fi if [ x$RunFrontend = x1 ] then - ser_daemon_add="frontend hal $ser_daemon_add" - ser_install=" $ser_install" - showX=true - else - ser_daemon_remove="frontend hal $ser_daemon_remove" - ser_remove="$ser_remove" - fi + ser_daemon_add="frontend hal $ser_daemon_add" + ser_install=" $ser_install" + showX=true +else + ser_daemon_remove="frontend hal $ser_daemon_remove" + ser_remove="$ser_remove" +fi if [ x$UseMythWEB = x1 ] then ser_install="lighttpd mythweb$postfix $ser_install" ser_daemon_add="lighttpd $ser_daemon_add" - else - ser_remove="mythweb$postfix $ser_remove" - ser_daemon_remove="$ser_daemon_remove" - fi +else + ser_remove="mythweb$postfix $ser_remove" + ser_daemon_remove="$ser_daemon_remove" +fi #samba if [ x$UseSamba = x1 ] @@ -700,48 +700,56 @@ fi if [ x$UseNFS = x1 ] then - ser_install="nfs-utils portmap $ser_install" - ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" - sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports + ser_install="nfs-utils portmap $ser_install" + ser_daemon_add="nfsd nfslock portmap $ser_daemon_add" + sed -e "s/REPLACEME/*/g" $TEMPLATES/exports.template > ${BASE}/etc/exports else - ser_remove="$ser_remove" - ser_daemon_remove="nfsd $ser_daemon_remove" + ser_remove="$ser_remove" + ser_daemon_remove="nfsd $ser_daemon_remove" fi if [ x$Runncidd = x1 ] then - ser_daemon_add="ncidd ncid $ser_daemon_add" - ser_install="ncid $ser_install" + ser_daemon_add="ncidd ncid $ser_daemon_add" + ser_install="ncid $ser_install" else - ser_daemon_remove="ncidd ncid $ser_daemon_remove" - ser_remove="ncid $ser_remove" + ser_daemon_remove="ncidd ncid $ser_daemon_remove" + ser_remove="ncid $ser_remove" fi if [ x$UseEvrouter = x1 ] then - ser_install="evrouter Xvfb $ser_install" - else - ser_remove="evrouter $ser_remove" + ser_install="evrouter Xvfb $ser_install" +else + ser_remove="evrouter $ser_remove" fi if [ x$DDnsEnable = x1 ] then - ser_daemon_add="inadyn $ser_daemon_add" - ser_install="inadyn $ser_install" + ser_daemon_add="inadyn $ser_daemon_add" + ser_install="inadyn $ser_install" else - ser_daemon_remove="inadyn $ser_daemon_remove" - ser_remove="inadyn $ser_remove" + ser_daemon_remove="inadyn $ser_daemon_remove" + ser_remove="inadyn $ser_remove" fi -if [ x$XScreensaver = x1 ] -then - ser_install="gnome-screensaver $ser_install" -else - ser_remove="gnome-screensaver $ser_remove" -fi +case x$Screensavertype in + xxscreensaver) ser_install="xscreensaver $ser_install" + ser_remove="gnome-screensaver $ser_remove" + ;; + xgscreensaver) ser_install="xscreensaver gnome-screensaver $ser_install" + + ;; + xnone) ser_remove="gnome-screensaver xscreensaver $ser_remove" + ;; + + xtinker) echo "tinker mode for screensaver" + ;; + + esac @@ -805,7 +813,7 @@ fi function setuppacman () { #setup link to httpd dir echo "Configuring pacman" - if [ ! x$1 = x ] +if [ ! x$1 = x ] then ln -s ${BASE}/data/var ${BASE}/data/srv/httpd/htdocs/repo echo "creating the link for the pacman repo mirror" @@ -823,14 +831,14 @@ echo "Configuring pacman" USERTEMPLATES="/data/home/mythtv/templates" if [ -f $USERTEMPLATES/sources/$i ] then - echo "Adding user $i" + echo "Adding user $i" cat $USERTEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i fi cat $TEMPLATES/sources/$i >> ${BASE}/etc/pacman.d/$i echo "setting local mirror to $dbhost for $i " done - #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg + #sed -e "s/REPLACEME/$dbhost/g" $TEMPLATES/sources/svc_pkg > /etc/pacman.d/svc_pkg } @@ -840,10 +848,10 @@ function setupzipcode () { if [ ! x$zipcode = x ] then ${MV_ROOT}/bin/restore_default_settings.sh -c ZIP -z $zipcode - #Let's also speed things up for those in North America - mkdir /usr/bin/perlbin/vendor/tv_grabbers_non_na - mv /usr/bin/perlbin/vendor/tv_grab_* /usr/bin/perlbin/vendor/tv_grabbers_non_na - mv /usr/bin/perlbin/vendor/tv_grabbers_non_na/tv_grab_na* /usr/bin/perlbin/vendor/ + #Let's also speed things up for those in North America + mkdir /usr/bin/perlbin/vendor/tv_grabbers_non_na + mv /usr/bin/perlbin/vendor/tv_grab_* /usr/bin/perlbin/vendor/tv_grabbers_non_na + mv /usr/bin/perlbin/vendor/tv_grabbers_non_na/tv_grab_na* /usr/bin/perlbin/vendor/ fi } @@ -887,21 +895,21 @@ fi } function setupcnfs () { - scrubnfs + scrubnfs if [ $HaveCentralNFS = "yes" ] - then + then case x$NFSserver in xfile:nfsmap ) process_nfsmap noip ;; - *:nfsmap ) + *:nfsmap ) nfsmapip=`echo "$NFSserver" | cut -d: -f1 ` process_nfsmap $nfsmapip ;; *) setupfstab $NFSserver $NFSmount esac - #if [ ! x"$NFSserver" = "xfile:nfsmap" ] + #if [ ! x"$NFSserver" = "xfile:nfsmap" ] #then # setupfstab $NFSserver $NFSmount #else @@ -914,7 +922,7 @@ function setupcnfs () { then setupfstab ${dbhost}:/myth /myth fi - fi + fi } @@ -1012,19 +1020,19 @@ EOF } function reloadfe(){ - PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'` - /usr/bin/backend_control.sh clearcache behost $dbhost - if [ x$RESTART_LCD = xtrue ] - then +PID=`ps -ef |grep mythfrontend|grep -v grep |awk '{print $2 }'` +/usr/bin/backend_control.sh clearcache behost $dbhost +if [ x$RESTART_LCD = xtrue ] +then killall -9 mythlcdserver - fi - if [ x = x$PID ] - then - echo "Mythfrontend not running, will not reload" - else +fi +if [ x = x$PID ] +then + echo "Mythfrontend not running, will not reload" +else kill -s USR1 $PID - fi - exit 0 +fi +exit 0 } @@ -1045,7 +1053,7 @@ do mysqlstatus=$? if [ $mysqlstatus = 0 ] then - mysql -e "show databases;" + mysql -e "show databases;" showstatus=$? if [ $showstatus = 0 ] then @@ -1059,13 +1067,13 @@ do #update database to allow user jobs on this host. $MV_ROOT/bin/restore_default_settings.sh -c USERJOBALLOW $MV_ROOT/bin/restore_default_settings.sh -c ACCESSCONTROL - if [ -d /data/srv/mysql/mythconverg ] - then - pacman --noconfirm -R webcalendar + if [ -d /data/srv/mysql/mythconverg ] + then + pacman --noconfirm -R webcalendar pacman --noconfirm --nodeps -S webcalendar - status=0 - fi - fi + status=0 + fi + fi fi done } @@ -1076,29 +1084,108 @@ function setup_web_auth { #enable auth sed -ie "s/^.*include.*auth-inc.conf.*$/include \"\/etc\/lighttpd\/auth-inc.conf\"/g" /etc/lighttpd/lighttpd.conf else - #disable auth + #disable auth sed -ie "s/^.*include.*auth-inc.conf.*$/#include \"\/etc\/lighttpd\/auth-inc.conf\"/g" /etc/lighttpd/lighttpd.conf fi sudo sv restart lighttpd } -function setupXscreensaver { + +function killxscreensaver { + xscreensaver-command --exit & + killall xscreensaver & +} + +function killgscreensaver(){ + gnome-screensaver-command --exit & + killall gnome-screensaver & +} + + +function setupscreensaver { #copy in template -#start it if not already running. - if [ x$XScreensaver = x1 ] - then - #check if it's running, it not start it. - if [ ! x$MV_NEW_INSTALL = "xtrue" ] - then - su - mythtv -c "/usr/bin/gnome-screensaver " - fi - else - #kill it - gnome-screensaver-command --exit & - killall gnome-screensaver & - fi +case x$Screensavertype in + xxscreensaver) + killgscreensaver + #why can't it have a nice conf tool like gconf + if [ ! -f $MYTHHOME/.xscreensaver ] + then + #copy in template + cp -f $TEMPLATES/xscreensaver.template $MYTHHOME/.xscreensaver + fi + #change the idle + sed -ie "s/^timeout.*$/timeout: 0:$Screensaveridle:00/g" $MYTHHOME/.xscreensaver + + #set the mode + case x$Screensavertheme in + xRandom) + sed -i "s/^mode.*$/mode: random/g" $MYTHHOME/.xscreensaver + ;; + xBlank) + sed -i "s/^mode.*$/mode: blank/g" $MYTHHOME/.xscreensaver + ;; + *) sed -i "s/^mode.*$/mode: one/g" $MYTHHOME/.xscreensaver + #set the theme + start=`awk '/programs/{print NR" "}' $MYTHHOME/.xscreensaver` + ss=`awk '/'$Screensavertheme'/{print NR" "}' $MYTHHOME/.xscreensaver` + sspos=$((ss-start)) + sed -i "s/^selected.*$/selected: $sspos/g" $MYTHHOME/.xscreensaver + + ;; + esac + + + + + + + ;; + xgscreensaver) + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type bool --set /apps/gnome-screensaver/lock_enabled false + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type int -s "/apps/gnome-screensaver/idle_delay" $Screensaveridle + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type string -s "/apps/gnome-screensaver/mode" single + + case x$Screensavertheme in + xRandom) + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type string -s "/apps/gnome-screensaver/mode" random + + ;; + xBlank) + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type string -s "/apps/gnome-screensaver/themes" blank + ;; + + *) + gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --set --type list --list-type=string /apps/gnome-screensaver/themes [screensavers-$Screensavertheme] + ;; + esac + + killxscreensaver + ;; + xnone) killgscreensaver + killxscreensaver + ;; + + xtinker) echo "tinker mode for setupscreensaver" + ;; + + esac + +# +# #start it if not already running. +# if [ x$XScreensaver = x1 ] +# then +# #check if it's running, it not start it. +# if [ ! x$MV_NEW_INSTALL = "xtrue" ] +# then +# su - mythtv -c "/usr/bin/gnome-screensaver " +# fi +# else +# #kill it +# gnome-screensaver-command --exit & +# killall gnome-screensaver & +# fi @@ -1120,7 +1207,7 @@ case $i in sleep) showsleep="true" ;; hostype) showhost="true" - showX="true" + showX="true" ;; hostypec) hosttypechange="true" ;; @@ -1136,16 +1223,16 @@ case $i in ;; restartfe) killall -9 mythfrontend killall -9 mythwelcome - exit 0 + exit 0 ;; reloadfe) reloadfe ;; ddns) services - install=$ser_install - remove=$ser_remove - daemon_add=$ser_daemon_add - daemon_remove=$ser_daemon_remove - ;; + install=$ser_install + remove=$ser_remove + daemon_add=$ser_daemon_add + daemon_remove=$ser_daemon_remove + ;; this_is_install) MV_NEW_INSTALL="true" ;; @@ -1155,7 +1242,7 @@ done if [ x$MV_NEW_INSTALL = xtrue ] then - hosttypechange="false" + hosttypechange="false" fi @@ -1203,7 +1290,7 @@ case $SystemType in services if [ x$hosttypechange = "xtrue" ] then - setup_db + setup_db fi if [ -f ${BASE}/etc/avahi/services/mysql.service ] then @@ -1220,7 +1307,7 @@ case $SystemType in daemon_remove="none $ser_daemon_remove" ;; - Master_backend) +Master_backend) setupntp 1 services @@ -1242,7 +1329,7 @@ case $SystemType in services if [ x$hosttypechange = "xtrue" ] then - setup_db + setup_db fi if [ -f ${BASE}/etc/avahi/services/mysql.service ] then @@ -1272,7 +1359,7 @@ case $SystemType in daemon_add="avahi portmap nfslock netfs lighttpd $ser_daemon_add " daemon_remove="mysql mythbackend $ser_daemon_remove" - ;; +;; esac @@ -1300,7 +1387,7 @@ fi if [ x$showaudio = "xtrue" ] then - #setupsoundtype + #setupsoundtype if [ ! x$Audiotype = xtinker ] then ${MV_ROOT}/bin/soundconfig.sh -t real -i $Audiotype -d $SoundDevice @@ -1314,15 +1401,15 @@ packages if [ x$showmisc = "xtrue" ] then - setupzipcode - settimezone + setupzipcode + settimezone setupcnfs fi #sleep if [ x$showsleep = "xtrue" ] then - setupsleep + setupsleep fi if [ x$showX = "xtrue" ] @@ -1349,7 +1436,7 @@ then else setuppacman fi - fi + fi setupncidclient setupnciddaemon setupbootsplash @@ -1359,7 +1446,8 @@ then setupblaster setupLCD setupDNSMASQ - setupXscreensaver + setupscreensaver + fi @@ -1378,9 +1466,9 @@ fi case $SystemType in Standalone) smoltsystem=6 - MVRELEASE="$MVRELEASE (Standalone)" + MVRELEASE="$MVRELEASE (Standalone)" ;; - Master_backend) +Master_backend) if [ x$RunFrontend = x1 ] then smoltsystem=2 @@ -1390,7 +1478,7 @@ case $SystemType in MVRELEASE="$MVRELEASE (MBE)" fi ;; - Slave_backend) +Slave_backend) if [ x$RunFrontend = x1 ] then smoltsystem=5 @@ -1400,9 +1488,9 @@ case $SystemType in MVRELEASE="$MVRELEASE (SLAVE)" fi ;; - Frontend_only) - smoltsystem=3 - MVRELEASE="$MVRELEASE ( Frontend only)" + Frontend_only) + smoltsystem=3 + MVRELEASE="$MVRELEASE ( Frontend only)" ;; esac echo $MVRELEASE > /etc/os_myth_release -- cgit v0.12