#!/bin/bash

exec 2>&1
export TERM=linux

. /etc/rc.conf
. /etc/rc.d/functions

#since what we do may not be enough
#if your one of those people, this is where you place your stuff

LOG=/tmp/lirc.log

if [ -f $LOG ]
then
    rm -f $LOG
fi

if [ -f /etc/runit/lirc.sh ]
then
    #program must not terminate.

    stat_runit "Starting lirc"
	
    /etc/runit/lirc.sh
else
    . /etc/systemconfig
    stat_runit "Starting lirc"

    [ -e /etc/sv/lircd/.runtime ] || mkdir -p /etc/sv/lircd/.runtime

    function dvico_detect {
        if [ x$Remotetype = "xdvico" ]
        then
            RunDvico=true
        else
            RunDvico=false
        fi
    }

    num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l `
    num_lirc=$((num_lirc-1))

    serial_port=""

    if [ x$ReceiverType = xSerial ]
    then
        serial_port=$ReceiverSerialport
    elid [ x$HostBlasterType = xSerial ]
    then
        serial_port=$HostSerialPort_blasterlirc
    fi

    if [ -n "$serial_port" ]
    then
        #/dev/ttyS0 (COM1), port 0x3f8, irq 4
        #/dev/ttyS1 (COM2), port 0x2f8, irq 3
    	#/dev/ttyS2 (COM3), port 0x3e8, irq 4
    	#/dev/ttyS3 (COM4), port 0x2e8, irq 3

        case $serial_port in
        ttyS0)
               FLAGS="io=0x3f8  irq=4"
               ;;
        ttyS1)
               FLAGS="io=0x2f8  irq=3"
               ;;
        ttyS2)
               FLAGS="io=0x3e8  irq=4"
               ;;
        ttyS3)
               FLAGS="io=0x2e8  irq=3"
               ;;
        esac
        /usr/bin/setserial /dev/serial_port uart none
	sleep 0.5
        /sbin/modprobe lirc_serial $FLAGS
	sleep 0.5
    fi

    dvico_detect

    if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ]
    then
        CMD="/usr/sbin/lircd -n  --driver=commandir"
	printhl "	Using commandir"
        $CMD >>$LOG 2>>$LOG
    elif [  x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ]
    then
	sv start igdaemon
        CMD="/usr/sbin/lircd -n  --driver=iguanaIR"
	printhl "       Using iguanaIR usb"
        $CMD >>$LOG 2>>$LOG
    else
        LASTCMD=""

        for i in `seq 1 $num_lirc`
        do
            CMD="/usr/sbin/lircd -d /dev/lirc$i --output=/dev/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
	    printhl "	Device $i"
            $CMD >>$LOG 2>>$LOG
            LASTCMD="--connect=localhost:876$i   $LASTCMD    "
        done

        if [ $RunDvico = "true" -a $num_lirc -lt 0 ]
        then
	    #only run Dvico
	    LCMD="/usr/sbin/lircd -n -d /dev/usb/dvicoIR --driver=dvico  --output /dev/lircd"
	    printhl "	Device Dvicio"
	    exec $LCMD >>$LOG 2>>$LOG
        elif [ $RunDvico = true -a $num_lirc -gt -1  ]
        then
            # Chain them together.
            i=$((i+1))
            CMD="/usr/sbin/lircd -d /dev/usb/dvicoIR --driver=dvico  --output=/dev/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
            $CMD >> $LOG
            LASTCMD="--connect=localhost:876$i   $LASTCMD    "
	    printhl "	Device Dvicio"
		
            /usr/sbin/lircd -n -d /dev/lirc0 --output /dev/lircd  $LASTCMD  >>$LOG 2>>$LOG
        else
            LCMD="/usr/sbin/lircd -n -d /dev/lirc0 --output /dev/lircd  $LASTCMD"
            exec $LCMD >>$LOG 2>>$LOG
        fi
    fi
fi