From 52e269b133d167a345758cb9d76d6348b3c66ebb Mon Sep 17 00:00:00 2001 From: Richard Vollkommer Date: Sat, 25 Oct 2014 17:17:22 -0300 Subject: [media] xc5000: add IF output level control Adds control of the IF output level to the xc5000 tuner configuration structure. Increases the IF level to the demodulator to fix failure to lock and picture breakup issues (with the au8522 demodulator, in the case of the Hauppauge HVR950Q). This patch works with all XC5000 firmware versions. Signed-off-by: Richard Vollkommer Signed-off-by: Michael Ira Krufky Reviewed-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/tuners/xc5000.c | 14 +++++++++++++- drivers/media/tuners/xc5000.h | 1 + drivers/media/usb/au0828/au0828-dvb.c | 2 ++ 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/media/tuners/xc5000.c b/drivers/media/tuners/xc5000.c index 803a0e6..705c258 100644 --- a/drivers/media/tuners/xc5000.c +++ b/drivers/media/tuners/xc5000.c @@ -62,6 +62,7 @@ struct xc5000_priv { unsigned int mode; u8 rf_mode; u8 radio_input; + u16 output_amp; int chip_id; u16 pll_register_no; @@ -744,7 +745,9 @@ static int xc5000_tune_digital(struct dvb_frontend *fe) return -EIO; } - xc_write_reg(priv, XREG_OUTPUT_AMP, 0x8a); + dprintk(1, "%s() setting OUTPUT_AMP to 0x%x\n", + __func__, priv->output_amp); + xc_write_reg(priv, XREG_OUTPUT_AMP, priv->output_amp); xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL); @@ -1358,6 +1361,9 @@ static int xc5000_set_config(struct dvb_frontend *fe, void *priv_cfg) if (p->radio_input) priv->radio_input = p->radio_input; + if (p->output_amp) + priv->output_amp = p->output_amp; + return 0; } @@ -1438,6 +1444,12 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, it can be overridden if this is a hybrid driver */ priv->chip_id = (cfg->chip_id) ? cfg->chip_id : 0; + /* don't override output_amp if it's already been set + unless explicitly specified */ + if ((priv->output_amp == 0) || (cfg->output_amp)) + /* use default output_amp value if none specified */ + priv->output_amp = (cfg->output_amp) ? cfg->output_amp : 0x8a; + /* Check if firmware has been loaded. It is possible that another instance of the driver has loaded the firmware. */ diff --git a/drivers/media/tuners/xc5000.h b/drivers/media/tuners/xc5000.h index 7245cae..6aa534f 100644 --- a/drivers/media/tuners/xc5000.h +++ b/drivers/media/tuners/xc5000.h @@ -36,6 +36,7 @@ struct xc5000_config { u32 if_khz; u8 radio_input; u16 xtal_khz; + u16 output_amp; int chip_id; }; diff --git a/drivers/media/usb/au0828/au0828-dvb.c b/drivers/media/usb/au0828/au0828-dvb.c index 00ab1563..c267d76 100644 --- a/drivers/media/usb/au0828/au0828-dvb.c +++ b/drivers/media/usb/au0828/au0828-dvb.c @@ -88,12 +88,14 @@ static struct xc5000_config hauppauge_xc5000a_config = { .i2c_address = 0x61, .if_khz = 6000, .chip_id = XC5000A, + .output_amp = 0x8f, }; static struct xc5000_config hauppauge_xc5000c_config = { .i2c_address = 0x61, .if_khz = 6000, .chip_id = XC5000C, + .output_amp = 0x8f, }; static struct mxl5007t_config mxl5007t_hvr950q_config = { -- cgit v0.11.2-5-g481e