#!/bin/bash

build() {
    add_checked_modules '/drivers/net/'

    add_binary "/usr/lib/initcpio/ipconfig" "/bin/ipconfig"
    add_binary "/usr/lib/initcpio/nfsmount" "/bin/nfsmount"

    add_runscript
}

help() {
    cat <<HELPEOF
This hook loads the necessary modules for a network device.
Detection will take place at runtime. To minimize the modules
in the image, add the autodetect hook too.
For pcmcia net devices please use pcmcia hook too.

Kernel Parameters:
An interface spec can be either short form, which is just the name of
an interface (eth0 or whatever), or long form.  The long form consists
of up to seven elements, separated by colons:

ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
nfsaddrs= is an alias to ip= and can be used too.

<client-ip>   IP address of the client. If empty, the address will
              either be determined by RARP/BOOTP/DHCP. What protocol
              is used de- pends on the <autoconf> parameter. If this
              parameter is not empty, autoconf will be used.

<server-ip>   IP address of the NFS server. If RARP is used to
              determine the client address and this parameter is NOT
              empty only replies from the specified server are
              accepted. To use different RARP and NFS server,
              specify your RARP server here (or leave it blank), and
              specify your NFS server in the 'nfsroot' parameter
              (see above). If this entry is blank the address of the
              server is used which answered the RARP/BOOTP/DHCP
              request.

<gw-ip>       IP address of a gateway if the server is on a different
              subnet. If this entry is empty no gateway is used and the
              server is assumed to be on the local network, unless a
              value has been received by BOOTP/DHCP.

<netmask>     Netmask for local network interface. If this is empty,
              the netmask is derived from the client IP address assuming
              classful addressing, unless overridden in BOOTP/DHCP reply.

<hostname>    Name of the client. If empty, the client IP address is
              used in ASCII notation, or the value received by
              BOOTP/DHCP.

<device>      Name of network device to use. If this is empty, all
              devices are used for RARP/BOOTP/DHCP requests, and the
              first one we receive a reply on is configured. If you
              have only one device, you can safely leave this blank.

<autoconf>    Method to use for autoconfiguration. If this is either
              'rarp', 'bootp', or 'dhcp' the specified protocol is
              used.  If the value is 'both', 'all' or empty, all
              protocols are used.  'off', 'static' or 'none' means
              no autoconfiguration.
Examples:
ip=127.0.0.1:::::lo:none  --> Enable the loopback interface.
ip=192.168.1.1:::::eth2:none --> Enable static eth2 interface.
ip=:::::eth0:dhcp --> Enable dhcp protcol for eth0 configuration.

nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]

If the 'nfsroot' parameter is NOT given on the command line, the default
"/tftpboot/%s" will be used.

<server-ip>   Specifies the IP address of the NFS server. If this field
              is not given, the default address as determined by the
              'ip' variable (see below) is used. One use of this
              parameter is for example to allow using different servers
              for RARP and NFS. Usually you can leave this blank.

<root-dir>    Name of the directory on the server to mount as root. If
              there is a "%s" token in the string, the token will be
              replaced by the ASCII-representation of the client's IP
              address.

<nfs-options> Standard NFS options. All options are separated by commas.
              If the options field is not given, the following defaults
              will be used:
                      port            = as given by server portmap daemon
                      rsize           = 1024
                      wsize           = 1024
                      timeo           = 7
                      retrans         = 3
                      acregmin        = 3
                      acregmax        = 60
                      acdirmin        = 30
                      acdirmax        = 60
                      flags           = hard, nointr, noposix, cto, ac

root=/dev/nfs

If you don't use nfsroot= parameter you need to set root=/dev/nfs
to boot from a nfs root by autoconfiguration.
HELPEOF
}

# vim: set ft=sh ts=4 sw=4 et: