#!/bin/bash

exec 2>&1
export TERM=linux

. /etc/rc.conf
. /etc/rc.d/functions
. /usr/MythVantage/bin/install_functions.sh

LOG=/tmp/lirc.log

if [ -f $LOG ]
then
    rm -f $LOG
fi








#since what we do may not be enough
#if your one of those people, this is where you place your stuff
#This means place your lirc stuff in /etc/runit/lirc.sh.
#Anything in that file will be used and the rest of this file is ignored

if [ -f /etc/runit/lirc.sh ]
then
    #program must not terminate.

    stat_runit "Starting lirc"

    /etc/runit/lirc.sh
else
    . /etc/systemconfig
    stat_runit "Starting lirc"

    in_kernel_support "disable"

    [ -e /etc/sv/lircd/.runtime ] || mkdir -p /etc/sv/lircd/.runtime
    [ -e /var/run/lirc ] || mkdir -p /var/run/lirc

    function dvico_detect {
        if [[ x$Remotetype = xdvico* ]] || [ x$Remotetype = "xDvico-Dual-Digital4-rev2" ]
        then
            RunDvico=true
        else
            RunDvico=false
        fi
    }

    num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l `
    num_lirc=$((num_lirc-1))

    serial_port=""

    if [ x$ReceiverType = xSerial ]
    then
        serial_port=$ReceiverSerialport
    elif [ x$HostBlasterType = xSerial ]
    then
        serial_port=$HostSerialPort_blasterlirc
    fi

    if [ -n "$serial_port" ]
    then
        #/dev/ttyS0 (COM1), port 0x3f8, irq 4
        #/dev/ttyS1 (COM2), port 0x2f8, irq 3
        #/dev/ttyS2 (COM3), port 0x3e8, irq 4
        #/dev/ttyS3 (COM4), port 0x2e8, irq 3

        case $serial_port in
        ttyS0)
               FLAGS="io=0x3f8  irq=4"
               ;;
        ttyS1)
               FLAGS="io=0x2f8  irq=3"
               ;;
        ttyS2)
               FLAGS="io=0x3e8  irq=4"
               ;;
        ttyS3)
               FLAGS="io=0x2e8  irq=3"
               ;;
        esac
        /usr/bin/setserial /dev/$serial_port uart none
        sleep 0.5
        /sbin/modprobe lirc_serial $FLAGS
        sleep 0.5
    fi

    dvico_detect

    if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ]
    then
        CMD="/usr/sbin/lircd -r -n  --driver=commandir"
        printhl "   Using commandir"
        $CMD >>$LOG 2>>$LOG
        #echo $CMD
    elif [  x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ]
    then
        sv start igdaemon
        CMD="/usr/sbin/lircd -r -n  --driver=iguanaIR"
        printhl "       Using iguanaIR usb"
        #echo $CMD
        $CMD >>$LOG 2>>$LOG

    elif [ x$ReceiverType = "xSiliconDust_HDHR" ]
    then
        # if using the SiliconDust_HDHR as an I/R Receiver
        printhl "   Using SiliconDust on port 5000"
        CMD="/usr/sbin/lircd -H udp -d 5000 -n"
        exec $CMD >>$LOG 2>>$LOG
    else
        LASTCMD=""

        for i in `seq 1 $num_lirc`
        do
            CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
            printhl "   Device $i"
            #echo $CMD
            $CMD >>$LOG 2>>$LOG
            LASTCMD="--connect=localhost:876$i   $LASTCMD    "
        done

        if [ $RunDvico = "true" ]
        then
            if [[ x$Remotetype = xdvico* ]]
            then
                LCMD="/usr/sbin/lircd -r -n -d /dev/usb/dvicoIR --driver=dvico  --output /var/run/lirc/lircd"
            else
                LCMD="/usr/sbin/lircd -r -n -d /dev/input/irremote --driver=devinput  --output /var/run/lirc/lircd"
            fi

            if [ $num_lirc -lt 0 ]
            then
                # Only run Dvico
                printhl "   Device $Remotetype"
                #echo $LCMD
                exec $LCMD >>$LOG 2>>$LOG
            elif [ $num_lirc -gt -1  ]
            then
                i=$((i+1))
                CMD="$LCMD --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
                $CMD >> $LOG
                LASTCMD="--connect=localhost:876$i   $LASTCMD    "
                printhl "   Device Dvico"
                /usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd  $LASTCMD  >>$LOG 2>>$LOG
            fi
        else
            LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd  $LASTCMD"
            #echo $LCMD
            exec $LCMD >>$LOG 2>>$LOG
        fi
    fi
fi