#!/bin/bash

exec 2>&1
export TERM=linux

. /etc/rc.conf
. /etc/rc.d/functions
. /usr/MythVantage/bin/install_functions.sh

LOG=/tmp/remotes.log

if [ -f $LOG ]
then
    rm -f $LOG
fi

echo "`date` --- run started" >> $LOG



#What is done in this file may not be enough to start your specific remote.
#If that is true of your remote place your remote startup commands in:
# /etc/runit/lirc.sh
#Anything in that file will be used and the rest of this file is ignored.

if [ -x /etc/runit/lirc.sh ]
then
    #program must not terminate.
    stat_runit "Starting remotes from /etc/runit/lirc.sh"
    echo "Starting remotes from /etc/runit/lirc.sh" >>$LOG
    /etc/runit/lirc.sh
else
    . /etc/systemconfig
    stat_runit "Starting remotes"
    
    [ -e /etc/sv/remotes/.runtime ] || mkdir -p /etc/sv/remotes/.runtime
    [ -e /var/run/lirc ] || mkdir -p /var/run/lirc
    
    num_lirc=`ls -la /dev/lirc[0-9] 2>/dev/null |wc -l `
    num_lirc=$((num_lirc-1))
    
    serial_port=""
    
    if [ x$ReceiverType = xSerial ]
    then
        serial_port=$ReceiverSerialport
    elif [ x$HostBlasterType = xSerial ]
    then
        serial_port=$HostSerialPort_blasterlirc
    fi
    
    if [ -n "$serial_port" ]
    then
        #/dev/ttyS0 (COM1), port 0x3f8, irq 4
        #/dev/ttyS1 (COM2), port 0x2f8, irq 3
        #/dev/ttyS2 (COM3), port 0x3e8, irq 4
        #/dev/ttyS3 (COM4), port 0x2e8, irq 3
    
        case $serial_port in
        ttyS0)
               FLAGS="io=0x3f8  irq=4"
               ;;
        ttyS1)
               FLAGS="io=0x2f8  irq=3"
               ;;
        ttyS2)
               FLAGS="io=0x3e8  irq=4"
               ;;
        ttyS3)
               FLAGS="io=0x2e8  irq=3"
               ;;
        esac
        /usr/bin/setserial /dev/$serial_port uart none
        sleep 0.5
        /sbin/modprobe lirc_serial $FLAGS
        sleep 0.5
    fi
    
    if [ x$HostBlasterType = xCommandIR -o x$ReceiverType = xCommandIR ]
    then
        CMD="/usr/sbin/lircd -r -n  --driver=commandir"
        printhl "   Using commandir"
        echo $CMD >>$LOG
        $CMD >>$LOG 2>>$LOG
    elif [ x$HostBlasterType = xiguanaIR-usb -o x$ReceiverType = xiguanaIR-usb ]
    then
        sv start igdaemon
        CMD="/usr/sbin/lircd -r -n  --driver=iguanaIR"
        printhl "       Using iguanaIR usb"
        echo $CMD >>$LOG
        $CMD >>$LOG 2>>$LOG
    elif [ x$ReceiverType = "xSiliconDust_HDHR" ]
    then
        # if using the SiliconDust_HDHR as an I/R Receiver
        CMD="/usr/sbin/lircd -H udp -d 5000 -n"
        printhl "   Using SiliconDust on port 5000"
        echo $CMD >>$LOG
        $CMD >>$LOG 2>>$LOG
    else
        LASTCMD=""
    
        for i in `seq 1 $num_lirc`
        do
            CMD="/usr/sbin/lircd -r -d /dev/lirc$i --output=/var/run/lirc/lircd$i --pidfile=/var/run/lircd$i.pid --listen=876$i"
            printhl "   Device $i"
            echo $CMD >>$LOG
            $CMD >>$LOG 2>>$LOG
            LASTCMD="--connect=localhost:876$i   $LASTCMD    "
        done
    
        echo $LASTCMD >>$LOG
    
        if [ -f /etc/remote.run ]
        then
            #program must not terminate.
    
            stat_runit "Starting remotes from /etc/remote.run"
            LCMD="/etc/remote.run    $LASTCMD"
            echo "Starting remotes from $LCMD" >>$LOG
            exec $LCMD >>$LOG 2>>$LOG
        else
            echo "Disable in kernel remote driver" >>$LOG
            in_kernel_support "disable"
            LCMD="/usr/sbin/lircd -r -n -d /dev/lirc0 --output /var/run/lirc/lircd  $LASTCMD"
            echo "Starting remotes from $LCMD" >>$LOG
            exec $LCMD >>$LOG 2>>$LOG
        fi
    fi
fi