# # this config file was automatically generated # using lirc-0.6.3 on Fri Nov 10 21:47:32 2000 # # contributed by Stefan Neuwirth & Andreas Lange # # brand: Sigma Designs # model: REALmagic remote control # www.realmagic.com/support.htm#remote # supported devices: # "For Hollywood Plus Version 1.4 or above Driver only" # remote control for the Sigma Designs REALmagic Hollywood Plus DVD card # receiver is connected to the serial port - it does not require the card # # The first byte always is 131. The second and third byte are equal. (CB) # begin remote name REALmagic bits 20 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 10 pre_data 0x183 gap 189974 toggle_bit 0 begin codes 1 0x0000000000062D8B 2 0x0000000000012C4B 3 0x000000000001AC6B 4 0x0000000000072DCB 5 0x000000000000AC2B 6 0x0000000000052D4B # Nicolas Vignal reported that this code is sent for his remote # version (1.5). It should be no problem to just have two entries for # "6" unless you want to send codes what won't work for this receiver # anyway. 6 0x0000000000041505 7 0x0000000000058561 8 0x0000000000044511 9 0x000000000004AD2B 0 0x000000000004C531 VOL+ 0x0000000000022C8B VOL- 0x0000000000032CCB MUTE 0x000000000006ADAB L-R 0x0000000000052549 VGA 0x0000000000054551 ENTER 0x0000000000042509 QUIT 0x0000000000058D63 PRG 0x0000000000038CE3 UP 0x0000000000078DE3 DOWN 0x0000000000064D93 LEFT 0x0000000000044D13 RIGHT 0x000000000003ECFB SELECT 0x0000000000024C93 MENU 0x0000000000014C53 TITLE 0x0000000000054D53 OSD 0x0000000000034CD3 LANG 0x0000000000074DD3 ANGLE 0x000000000000CC33 SUB 0x000000000004CD33 PAUSE 0x000000000002CCB3 STOP 0x000000000006CDB3 PLAY 0x000000000001CC73 EJECT 0x000000000005CD73 REV 0x000000000003CCF3 FF 0x000000000007CDF3 PREV 0x0000000000002C0B NEXT 0x0000000000042D0B end codes end remote