summaryrefslogtreecommitdiffstats
path: root/build_tools/clarch/larch/profiles/MV-local
diff options
context:
space:
mode:
authorJames Meyer <jams@linhes.org>2010-12-04 23:44:45 (GMT)
committerJames Meyer <jams@linhes.org>2010-12-04 23:44:51 (GMT)
commitf51fb708846d13222bd97b3f760eb3be902c0be0 (patch)
treead25ff81828f12cb7da86384863e163cb4e001f2 /build_tools/clarch/larch/profiles/MV-local
parent4384efe238cdfeac86fae0d8e1097a409350f8c6 (diff)
downloadlinhes_dev-f51fb708846d13222bd97b3f760eb3be902c0be0.zip
remove old versions of larch 6 and 7
Diffstat (limited to 'build_tools/clarch/larch/profiles/MV-local')
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/addedpacks151
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/baseveto7
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/cache_packs39
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg38
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpgbin57322 -> 0 bytes
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/locale.gen8
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf54
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/pacman.conf66
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/pkglist366
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post-process.sh17
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/fstab14
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch13
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow7
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny6
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/menu.lst55
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf64
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/rc.conf113
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/rc.local21
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown104
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch14
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/post_process/root13
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/securetty19
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh67
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rcconfx16
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd6
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow7
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab42
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown47
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options352
-rwxr-xr-xbuild_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local21
-rw-r--r--build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc2
31 files changed, 0 insertions, 1749 deletions
diff --git a/build_tools/clarch/larch/profiles/MV-local/addedpacks b/build_tools/clarch/larch/profiles/MV-local/addedpacks
deleted file mode 100644
index a04a8eb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/addedpacks
+++ /dev/null
@@ -1,151 +0,0 @@
-# These are needed to build a live CD
-#linhes-live
-mythvantage-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-ntfsprogs
-parted
-#ddcxinfo-knoppix
-#hwd
-
-# generally useful tools which don't require X
-openssh
-dosfstools
-lynx
-#mc
-unzip
-zip
-
-lsof
-#cdrkit
-#dvd+rw-tools
-
-etcnet
-
-xorg
-xorg-xinit
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-#unichrome is busted and causes X to segfault
-#xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-#vga should not be installed, vesa can handle when other drivers fail
-#xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-
-
-
-
-#terminal
-openssh
-ntp
-runit
-runit-scripts-mv
-mysql
-
-mythtv-release-fixes
-mythtv-themes-release-fixes
-mediadirsetup
-lm_sensors
-MythVantage-mythmenu
-setserial
-avahi
-keylaunch
-mysql-python
-acpid
-
-
-tilda
-#opera
-ivtv-utils
-hd3000firmware
-oss
-alsa-utils
-
-make
-python-iplib
-#hdhgrab
-hdhomerun
-
-#intel-e1000
-perl-dbi
-perl-dbd-mysql
-lcdproc
-netkit-telnet
-nfs-utils
-jfsutils
-xfsprogs
-
-patch
-gdb
-sudo
-syslog-ng
-
-ttf-bitstream-vera
-xine-lib
-
-syth-lacquer-wide
-Midnight-wide
-Midnight-blue
-basic-blue
-basic-green
-basic-amber
-basic-purple
-basic-red
-
-
-MythVantage-system
-#live-installer
-MythVantage-config
-libstatgrab
-nmbscan
-smbclient
-
-
-
-enlightenment
-e16-myth-settings
-ttf-ms-fonts
-dbus-python \ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/baseveto b/build_tools/clarch/larch/profiles/MV-local/baseveto
deleted file mode 100644
index 419aad4..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/baseveto
+++ /dev/null
@@ -1,7 +0,0 @@
-xfsprogs
-xfsdump
-jfsutils
-kernel26STB
-xf86-video-unichrome
-xf86-video-via
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/cache_packs b/build_tools/clarch/larch/profiles/MV-local/cache_packs
deleted file mode 100644
index 782f3b5..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/cache_packs
+++ /dev/null
@@ -1,39 +0,0 @@
-#comment
-xosd
-local-website
-webcalendar
-lighttpd
-mythdb-initial
-samba
-libmysqlclient
-mysql
-hobbitserver
-hobbit-client
-dnsmasq
-mysql-clients
-mythtv-status
-avahi
-dbus
-myth2ipod
-tightvnc
-phpmyadmin
-libgl-dri
-mythphone-release-fixes
-mytharchive-release-fixes
-mythbrowser-release-fixes
-mythnews-release-fixes
-mythgame-release-fixes
-mythflix-release-fixes
-mythweather-release-fixes
-mythcontrols-release-fixes
-mythgallery-release-fixes
-mythmovietime-release-fixes
-mythmusic-release-fixes
-mythsmolt-release-fixes
-mythvideo-release-fixes
-mythweb-release-fixes
-alsa-lib
-nvidia
-nvidia-utils
-nvidia-96xx
-nvidia-96xx-utils
diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index a4c7998..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-PROMPT 0
-TIMEOUT 40
-DEFAULT vesamenu.c32
-MENU BACKGROUND vbg.jpg
-MENU TITLE MythVantage Boot options
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 all
-
-
-LABEL MythVantage
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto
-
-LABEL MythVantage-NoX
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto NoX
-
-LABEL MythVantage-Vnc
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netdev=eth0
-
-LABEL MythVantage-dhcp
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto ip=dhcp netdev=eth0
-
-LABEL MythVantage-remote
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto ip=dhcp remote=MX-500-jams remoteport=ttyS0
-
-LABEL MythVantage-static-ip
-KERNEL vmlinuz
-APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netmask=255.255.0.0 gateway=192.168.1.1 netdev=eth0 dns=192.168.1.1
-
-LABEL Boot_from_hardrive
- localboot 0xffff
-
-MENU ROWS 6
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index d9f3ebb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg
+++ /dev/null
Binary files differ
diff --git a/build_tools/clarch/larch/profiles/MV-local/locale.gen b/build_tools/clarch/larch/profiles/MV-local/locale.gen
deleted file mode 100644
index a3276b1..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/locale.gen
+++ /dev/null
@@ -1,8 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-de_DE ISO-8859-1
-de_DE@euro ISO-8859-15
-de_DE.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf b/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf
deleted file mode 100644
index f26fdb1..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf
+++ /dev/null
@@ -1,54 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish. This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-#BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway. This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-# FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'modload' may be used in place of 'udev', but is not recommended
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-# This setup specifies all modules in the MODULES setting above.
-# No raid, lvm, or encrypted root is needed.
-# HOOKS="base"
-#
-# This setup will autodetect all modules for your system and should
-# work as a sane default
-# HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-# This setup will generate a 'full' image which supports most systems.
-# No autodetection is done.
-# HOOKS="base udev ide scsi sata usb filesystems"
-#
-# This setup assembles an ide raid array with an encrypted root FS.
-# Note: See 'mkinitcpio -H raid' for more information on raid devices.
-# HOOKS="base udev ide filesystems raid encrypt"
-#
-# This setup loads an LVM volume group on a usb device.
-# HOOKS="base udev usb filesystems lvm"
-HOOKS="base udev ide scsi sata usb larch1 larch2___aufs___ larch3"
diff --git a/build_tools/clarch/larch/profiles/MV-local/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/pacman.conf
deleted file mode 100755
index 3739bbc..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/pacman.conf
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[mv-core]
-Server = http://localmirror/repo/i686/mv-core
-
-[core-testing]
-#Server = file:///data/local/pkg_repo/i686/core-testing
-Server = http://localmirror/repo/i686/core-testing
-
-[extra-testing]
-#Server = file:///data/local/pkg_repo/i686/core-testing
-Server = http://localmirror/repo/i686/extra-testing
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/MV-local/pkglist b/build_tools/clarch/larch/profiles/MV-local/pkglist
deleted file mode 100644
index 91351bc..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/pkglist
+++ /dev/null
@@ -1,366 +0,0 @@
-Midnight-blue 1-22
-Midnight-wide 1-22
-STB-mythmenu 1.0-38
-STB-system 3.0-159
-acl 2.2.47-1
-acpid 1.0.6-3
-alsa-lib 1.0.16-1
-atk 1.22.0-1
-attr 2.4.41-1
-audiofile 0.2.6-3
-avahi 0.6.22-1
-bash 3.2.033-2
-basic-amber 1-5
-basic-blue 1-6
-basic-green 1-5
-basic-purple 1-5
-basic-red 1-5
-bc 1.06-4
-bigreqsproto 1.0.2-1
-binutils 2.18-8
-bzip2 1.0.5-2
-ca-certificates 20080514-3
-cairo 1.6.4-1
-compositeproto 0.4-1
-confuse 2.5-1
-coreutils 6.12-1
-cpio 2.9-3
-cracklib 2.8.10-5
-cryptsetup 1.0.6-1
-curl 7.18.2-1
-damageproto 1.1.0-1
-dash 0.5.4-4
-db 4.6.21-2
-dbus 1.2.1-1
-dbus-glib 0.76-1
-dcron 3.2-3
-ddcxinfo-arch 0.8-1
-device-mapper 1.02.24-1
-dhcpcd 3.2.1-1
-dialog 1.1_20080316-3
-diffutils 2.8.1-5
-dmapi 2.2.8-3
-dmidecode 2.9-2
-dmxproto 2.2.2-1
-dnsutils 9.4.2-1
-e16-myth-settings 1.0-38
-e2fsprogs 1.40.8-1
-ed 0.9-1
-eject 2.1.5-3
-enlightenment 0.16.8.9-2
-esd 0.2.38-3
-etcnet 0.7.15-19
-ethtool 6-1
-evilwm 1.0.0-1.1
-exo 0.3.4-1
-expat 2.0.1-1
-expect 5.44.1.4-1
-file 4.24-1
-filesystem 2008.06-2
-findutils 4.4.0-1
-fixesproto 4.0-2
-flac 1.2.1-1
-fontcacheproto 0.1.2-1
-fontconfig 2.5.0-1
-fontsproto 2.0.2-1
-freetype2 2.3.6-1
-func 0.13-15
-gawk 3.1.6-2
-gcc 4.3.1-1
-gcc-libs 4.3.1-1
-gdb 6.8-1
-gdbm 1.8.3-5
-gdk-pixbuf 0.22.0-4
-gen-init-cpio 2.6.17-3
-gettext 0.17-1
-ghosd 0.0.1-18
-glib 1.2.10-7
-glib2 2.16.4-1
-glibc 2.8-2
-glproto 1.4.9-1
-gmp 4.2.2-2
-grep 2.5.3-3
-groff 1.19.2-4
-grub 0.97-12
-gtk 1.2.10-8
-gtk2 2.12.10-1
-guile 1.8.4-2
-gzip 1.3.12-4
-hal 0.5.11-1
-hal-info 0.20080508-1
-hd3000firmware 0.1-1
-hdhgrab 1-1
-hdhomerun 20070726-1
-hdparm 8.6-1
-heimdal 1.0.1-2
-hwd 5.3.4-1
-hwdetect 0.9-1
-iguanaIR 0.95-3
-imlib2 1.4.1-1
-initscripts 2008.05-1
-inputproto 1.4.3-1
-intel-dri 7.0.3-1
-intel-e1000 7.6.15.4-2
-iproute 2.6.24_rc7-1
-iptables 1.4.0-2
-iputils 20070202-4
-ivtv-utils 1.0.3-1
-jfsutils 1.1.12-2
-kbd 1.14.1.20080309-2
-kbproto 1.0.3-1
-kernel-headers 2.6.25.6-1
-kernel26STB 2.6.24-39
-keylaunch 1.3.3-10
-klibc 1.5-5
-klibc-extras 2.4-1
-klibc-kbd 1.15.20080312-5
-klibc-module-init-tools 3.2.2-3
-klibc-udev 116-3
-lame 3.98-1
-lcdproc 20080326-7
-less 418-1
-libarchive 2.5.5-1
-libavc1394 0.5.3-1
-libcap 1.10-2
-libdaemon 0.12-1
-libdatrie 0.1.2-1
-libdc1394 2.0.1-1
-libdmx 1.0.2-1
-libdownload 1.3-1
-libdrm 2.3.0-1
-libfontenc 1.0.4-1
-libgcrypt 1.4.1-1
-libglade 2.6.2-1
-libgpg-error 1.6-1
-libice 1.0.4-1
-libid3tag 0.15.1b-2
-libiec61883 1.1.0-1
-libjpeg 6b-4
-liblbxutil 1.0.1-1
-libldap 2.3.40-1
-libmng 1.0.10-1
-libmpeg2 0.4.1-1
-libmysqlclient 5.0.60-1
-libogg 1.1.3-1
-libpcap 0.9.8-2
-libpng 1.2.29-1
-libraw1394 1.3.0-1
-libsasl 2.1.22-5
-libsm 1.0.3-1
-libsmbios 2.0.2-1
-libstatgrab 0.14-1
-libthai 0.1.9-1
-libtheora 1.0beta1-1
-libtiff 3.8.2-3
-libtool 2.2.4-1
-libungif 4.1.4-1
-libusb 0.1.12-3
-libvorbis 1.2.0-1
-libx11 1.1.4-2
-libx86 0.99-1
-libxau 1.0.3-1
-libxaw 1.0.4-1
-libxcb 1.1-1
-libxcomposite 0.4.0-1
-libxcursor 1.1.9-1
-libxdamage 1.1.1-1
-libxdmcp 1.0.2-1
-libxext 1.0.4-1
-libxfce4util 4.4.2-1
-libxfixes 4.0.3-1
-libxfont 1.3.2-1
-libxfontcache 1.0.4-1
-libxft 2.1.12-1
-libxi 1.1.3-1
-libxinerama 1.0.3-1
-libxkbfile 1.0.5-1
-libxkbui 1.0.2-1
-libxml2 2.6.32-1
-libxmu 1.0.4-1
-libxp 1.0.0-1
-libxpm 3.5.7-1
-libxrandr 1.2.2-1
-libxrender 0.9.4-1
-libxt 1.0.5-1
-libxtrap 1.0.0-1
-libxtst 1.0.3-1
-libxv 1.0.4-1
-libxvmc 1.0.4-1
-libxxf86dga 1.0.2-1
-libxxf86misc 1.0.1-1
-libxxf86vm 1.0.1-1
-licenses 2.4-1
-lirc 0.8.3-17
-lirc-utils 0.8.3-13
-live-installer 3.2-52
-lm_sensors 3.0.2-1
-logrotate 3.7.5-1
-lvm2 2.02.36-1
-lzo2 2.02-3
-mailx 8.1.1-5
-man 1.6f-2
-man-pages 3.00-1
-mcpp 2.6.4-2
-mdadm 2.6.4-1
-mediadirsetup 1-14
-mesa 7.0.3-3
-mkinitcpio 0.5.19-1
-mlocate 0.20-2
-module-init-tools 3.2.2-6
-mpfr 2.3.1-1
-mysql 5.0.60-200
-mysql-clients 5.0.60-1
-mysql-python 1.2.2-1
-mythtv-release-fixes 17773-8
-mythtv-themes-release-fixes 15931-4
-nano 2.0.7-1
-ncid 0.71-1
-ncurses 5.6-6
-net-tools 1.60-13
-netkit-telnet 0.17-7
-nfs-utils 1.1.0-2
-nfsidmap 0.20-2
-nmbscan 1.2.5-1
-ntp 4.2.4p4-1
-nvidia-STB 173.08-5
-nvidia-utils 173.08-4
-openssh 5.0p1-1
-openssl 0.9.8h-3
-opera 9.51-1
-oss 4.0_1016-11
-pacman 3.2.0-2008
-pam 1.0.1-1
-pango 1.18.4-3
-patch 2.5.9-1
-pciutils 2.2.8-3
-pcmciautils 014-4
-pcre 7.7-1
-perl 5.10.0-3
-perl-date-manip 5.44-1
-perl-dbd-mysql 3.0008-11000
-perl-dbi 1.601-1
-perl-uri 1.35-3
-perl-xml-parser 2.34-2
-pixman 0.10.0-1
-pm-utils 1.1.2.2-1
-popt 1.10.6-3
-portmap 6.0-2
-ppp 2.4.4-6
-printproto 1.0.4-1
-procinfo 19-2
-procps 3.2.7-1000
-psmisc 22.6-1
-pyopenssl 0.6-3
-python 2.5.2-2
-python-iplib 1.0-1
-qt3 3.3.8-7
-randrproto 1.2.1-1
-readline 5.2-7
-recordproto 1.13.2-1
-reiserfsprogs 3.6.20-3
-renderproto 0.9.3-1
-rp-pppoe 3.8-3
-run-parts 2.28.6-2
-runit 1.8.0-32
-sdl 1.2.13-1
-sdparm 1.02-2
-sed 4.1.5-3
-setserial 2.17-2
-shadow 4.0.18.2-2
-smbclient 3.0.30-1
-sudo 1.6.9p17-1
-swig 1.3.31-1
-sysfsutils 2.1.0-4
-syslog-ng 2.0.9-4
-sysvinit 2.86-4
-syth-lacquer-wide 4-1
-tar 1.20-2
-tcl 8.5.3-1
-tcp_wrappers 7.6-8
-terminal 0.2.8-2
-tilda 0.9.6-8
-trapproto 3.4.3-1
-ttf-bitstream-vera 1.10-5
-tzdata 2008c-1
-udev 119-1
-unclutter 8-1
-unichrome-dri 7.0.3-1
-usbutils 0.73-5
-util-linux-ng 2.13.0.1-2
-vbetool 1.0-2
-vi 7.1.330-1
-videoproto 2.2.2-1
-vmwaretools 6.0.0-6
-vte 0.16.14-1
-wavpack 4.50.0-1
-wget 1.11.3-1
-which 2.19-2
-wireless_tools 29-2
-wol 0.7.1-2
-wpa_supplicant 0.5.10-1
-xbitmaps 1.0.1-1
-xcb-proto 1.1-1
-xcursor-themes 1.0.1-1
-xextproto 7.0.3-1
-xf86-input-evdev 2.0.1-1
-xf86-input-joystick 1.3.1-1
-xf86-input-keyboard 1.3.1-1
-xf86-input-mouse 1.2.3-1
-xf86-video-apm 1.2.0-1
-xf86-video-ark 0.7.0-1
-xf86-video-ati 6.8.0-4
-xf86-video-chips 1.2.0-1
-xf86-video-cirrus 1.2.1-1
-xf86-video-dummy 0.2.0-4
-xf86-video-fbdev 0.3.1-4
-xf86-video-glint 1.1.1-5
-xf86-video-i128 1.2.1-4
-xf86-video-i740 1.1.0-4
-xf86-video-imstt 1.1.0-4
-xf86-video-intel 2.3.2-1
-xf86-video-mga 1.4.8-3
-xf86-video-neomagic 1.2.1-1
-xf86-video-nv 2.1.9-1
-xf86-video-rendition 4.1.3-4
-xf86-video-s3 0.5.0-4
-xf86-video-s3virge 1.10.1-1
-xf86-video-savage 2.2.1-1
-xf86-video-siliconmotion 1.5.1-4
-xf86-video-sis 0.9.4-3
-xf86-video-sisusb 0.8.1-4
-xf86-video-tdfx 1.4.0-1
-xf86-video-trident 1.3.0-2
-xf86-video-tseng 1.1.1-4
-xf86-video-v4l 0.1.1-4
-xf86-video-vesa 1.3.0-5
-xf86-video-vga 4.1.0-4
-xf86-video-via 0.2.2-5
-xf86-video-vmware 10.16.2-1
-xf86-video-voodoo 1.1.1-4
-xf86dgaproto 2.0.3-1
-xf86miscproto 0.9.2-1
-xf86vidmodeproto 2.2.2-1
-xfsprogs 2.9.7-1
-xine-lib 1.1.12-1
-xineramaproto 1.1.2-1
-xkeyboard-config 1.2-1
-xorg-apps 1.0.3-3
-xorg-font-utils 1.0.3-3
-xorg-fonts-100dpi 1.0.1-1
-xorg-fonts-75dpi 1.0.1-2
-xorg-fonts-alias 1.0.1-1
-xorg-fonts-encodings 1.0.2-2
-xorg-fonts-misc 1.0.0-3
-xorg-res-utils 1.0.3-2
-xorg-server 1.4.2-10
-xorg-server-utils 7.3-1
-xorg-twm 1.0.1-2
-xorg-utils 7.3-1
-xorg-xauth 1.0.2-1
-xorg-xinit 1.1.0-1
-xorg-xkb-utils 1.0.2-2
-xosd 2.2.14-1
-xproto 7.0.13-1
-xterm 235-1
-xtrans 1.2-1
-zlib 1.2.3-4
diff --git a/build_tools/clarch/larch/profiles/MV-local/post-process.sh b/build_tools/clarch/larch/profiles/MV-local/post-process.sh
deleted file mode 100755
index 131b907..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.tweak
-chroot $INSTDIR .tweak/tweak.sh
-rm -rf $INSTDIR/.tweak
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab b/build_tools/clarch/larch/profiles/MV-local/post_process/fstab
deleted file mode 100755
index 8ea8305..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# /etc/fstab: static file system information
-#
-# <file system> <dir> <type> <options> <dump> <pass>
-none /dev/pts devpts defaults 0 0
-none /dev/shm tmpfs defaults 0 0
-
-/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
-/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
-/dev/fd0 /mnt/fl vfat user,noauto 0 0
-
-/dev/hda1 / reiserfs defaults 0 1
-/dev/hda2 swap swap defaults 0 0
-/dev/hda3 /data reiserfs defaults 0 0
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch
deleted file mode 100644
index eb9034c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- functions.orig 2008-07-06 10:16:37.000000000 -0500
-+++ functions 2008-07-06 19:42:07.000000000 -0500
-@@ -61,8 +61,8 @@
-
- # prefixes:
-
--PREFIX_REG="::"
--PREFIX_HL=" >"
-+PREFIX_REG=" :"
-+PREFIX_HL=" :"
-
- # functions:
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst
deleted file mode 100755
index 1bd45a6..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst
+++ /dev/null
@@ -1,55 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title MythVantage
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title STB-bootsplash
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title STB-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
-initrd /boot/kernel26.img
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf
deleted file mode 100755
index e4495ed..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[mv-core-testing]
-Server = http://mvbuild/repo/mv-core-testing/
-
-[mv-extra-testing]
-Server = http://mvbuild/repo/mv-extra-testing/
-
-[svc_pkg]
-Include = /etc/pacman.d/svc_pkg
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf
deleted file mode 100755
index 03d8e5c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf
+++ /dev/null
@@ -1,113 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="no"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="soundcore"
-else
- if [ x$Audiotype = x ]
- then
- ALSABLACKLIST="soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST=($ALSABLACKLIST)
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=()
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus hal avahi-daemon)
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local
deleted file mode 100755
index 0552860..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-#install initial database
-pacman -S --noconfirm /data/var/cache/pacman/pkg/mythdb-initial* 2>/dev/null
-
-init_network
-/etc/rc.d/alsa-utils start 0
-init_remote
-random_theme
-
-echo $CMDLINE | grep -q NoX
-if [ $? = 0 ]
-then
- echo "No auto X option found"
- /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch
deleted file mode 100644
index 7648f7f..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- rc.sysinit.orig 2009-02-22 22:45:07.000000000 +0000
-+++ rc.sysinit 2009-02-22 22:45:46.000000000 +0000
-@@ -7,9 +7,8 @@
- . /etc/rc.d/functions
-
- echo " "
--printhl "LinHES"
--printhl "The Linux Home Entertainment System"
--printhl "${C_H2}http://www.linhes.org"
-+printhl "MythVantage"
-+printhl "http://www.MythVantage.com"
- printhl "Distributed under the GNU General Public License (GPL)"
- printsep
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/root b/build_tools/clarch/larch/profiles/MV-local/post_process/root
deleted file mode 100644
index e6542a2..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/root
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# DO NOT EDIT THIS FILE MANUALLY!! USE crontab -e INSTEAD.
-#
-
-# <minute> <hour> <day> <month> <dow> <command>
-
-
-01 * * * * /usr/sbin/run-cron /etc/cron.hourly
-*/10 * * * * /usr/sbin/run-cron /etc/cron.tenminutes
-02 00 * * * /usr/sbin/run-cron /etc/cron.daily
-22 00 * * 0 /usr/sbin/run-cron /etc/cron.weekly
-42 00 1 * * /usr/sbin/run-cron /etc/cron.monthly
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty b/build_tools/clarch/larch/profiles/MV-local/post_process/securetty
deleted file mode 100755
index 68e8a50..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# /etc/securetty
-#
-
-console
-vc/1
-vc/2
-vc/3
-vc/4
-vc/5
-vc/6
-tty1
-tty2
-tty3
-tty4
-tty5
-tty6
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh b/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh
deleted file mode 100755
index 9fa0396..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/bin/bash
-
-cd /
-#tar -zxvf .tweak/linux-kernel-2.6.16-i486-1.tgz
-#chmod 755 install/doinst.sh
-#install/doinst.sh
-cd .tweak
-#cd /boot
-#ln -s vmlinuz26STB vmlinuz
-#cd -
-#cp fstab /etc/fstab.install
-#cp pacman.conf /etc
-cp menu.lst /boot/grub/menu.lst
-
-cp -f hosts.allow /etc/hosts.allow
-cp -f securetty /etc/securetty
-cp -f rc.conf /etc/rc.conf
-#cp -f rc.local /etc/rc.local
-#cp -f locale.gen /etc/locale.gen
-
-cp -f rc.shutdown /etc/rc.shutdown
-#cp -f inittab /etc/inittab
-
-#cp -f fbsplash-darch-1024x768 /boot/fbsplash-darch-1024x768
-
-
-
-#cp -rf .tilda /data/home/mythtv/.tilda
-ln -s /etc/keylaunchrc /root/.keylaunchrc
-mkdir -p /etc/cron.tenminutes
-cp -f root /var/spool/cron/root
-chmod 0440 /etc/sudoers
-#echo "mvi" > /etc/hostname
-#echo /usr/local/lib >> /etc/ld.so.conf
-#/sbin/ldconfig
-#/usr/sbin/locale-gen
-
-chmod 777 /tmp
-mkdir -p /data/home/mythtv/.mythtv
-ln -s /etc/lircrc /data/home/mythtv/.mythtv/lircrc
-ln -s /etc/lircrc /data/home/mythtv/.lircrc
-cp -f /etc/skel/.bashrc /data/home/mythtv/
-cp -f /etc/skel/.bash_profile /data/home/mythtv/
-cp -f /etc/skel/.bashrc /root/
-cp -f /etc/skel/.bash_profile /root/
-mkdir -p /data/home/mythtv/templates
-chown -R mythtv /data/media
-chown -R mythtv /data/home/mythtv
-ln -s /usr/sbin/chroot /usr/bin/chroot
-ln -s /bin/lsmod /sbin/lsmod
-/sbin/add_service.sh netfs
-/sbin/add_service.sh oss
-/sbin/add_service.sh syslog-ng
-/sbin/remove_service.sh alsa-utils
-/usr/bin/chage -d 01-01-2000 nobody
-/usr/bin/chage -E 01-01-3000 nobody
-cp /etc/pam.d/chage /etc/pam.d/chsh
-chsh -s /bin/bash nobody
-
-
-cd /etc/rc.d
-echo "patching functions"
-patch -p0 </.tweak/functions.patch
-cd /etc
-echo "patching rc.sysinit"
-patch -p0 </.tweak/rc.sysinit.patch
-ln -s /bin/bash /bin/ash
diff --git a/build_tools/clarch/larch/profiles/MV-local/rcconfx b/build_tools/clarch/larch/profiles/MV-local/rcconfx
deleted file mode 100644
index 80e7dfa..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rcconfx
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# patch file for /etc/rc.conf
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="UTC"
-ddKEYMAP="de-latin1-nodeadkeys"
-MODULES=()
-
-HOSTNAME="mvi"
-
-USELVM="no"
-
-#eth0="dhcp"
-
-#DAEMONS=(syslog-ng mysqld)
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow
deleted file mode 100644
index ca19dbb..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab
deleted file mode 100644
index b8b2b3a..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,42 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:3:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/loginroot
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local
deleted file mode 100755
index c1b0154..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/bash
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-#install initial database
-pacman -S --noconfirm mythdb-initial 2>/dev/null
-
-init_network
-/etc/rc.d/alsa-utils start 0
-init_remote
-random_theme
-
-echo $CMDLINE | grep -q NoX
-if [ $? = 0 ]
-then
- echo "No auto X option found"
- /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc
deleted file mode 100644
index 3e5c29c..0000000
--- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc
+++ /dev/null
@@ -1,2 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '