remove old versions of larch 6 and 7

23 files changed, 0 insertions, 983 deletions

diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom
deleted file mode 100644
index 8e3ec5e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom
+++ /dev/null
@@ -1,22 +0,0 @@
-if grep -v nox /proc/cmdline &>/dev/null && \
-        [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
-    if grep i810 /proc/cmdline &>/dev/null; then
-        startx -- -config xorg.conf.i810
-    else
-        startx
-    fi
-
-    # Maybe there should be some code here to handle a failed startx?
-    
-    # The 'return' value is at /tmp/xlogout
-    # If there is nothing there, switch user to 'newuser'
-    # If there is also nothing there, login as root
-    #    - if already root, fall through to terminal
-    
-    if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
-        logout    
-    elif [ ${UID} -ne 0 ]; then
-        echo "root" >/tmp/newuser
-        logout
-    fi
-fi
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
-	Identifier     "X.org Configured"
-	Screen      0  "Screen0" 0 0
-EndSection
-
-Section "Device"
-	Identifier  "Card0"
-	Driver      "vesa"
-EndSection
-
-Section "Monitor"
-	Identifier  "Monitor0"
-	HorizSync   30.0 - 65.0
-	VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
-	Identifier "Screen0"
-	Device     "Card0"
-	Monitor    "Monitor0"
-	DefaultDepth 16
-	SubSection "Display"
-		Viewport   0 0
-		Depth     1
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     4
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     8
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     15
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     16
-		Modes     "1024x768" "800x600"
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     24
-	EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
-	Identifier     "X.org Configured"
-	Screen      0  "Screen0" 0 0
-EndSection
-
-Section "Device"
-        ### Available Driver options are:-
-        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
-        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
-        ### [arg]: arg optional
-        #Option     "NoAccel"            	# [<bool>]
-        #Option     "SWcursor"           	# [<bool>]
-        #Option     "ColorKey"           	# <i>
-        #Option     "CacheLines"         	# <i>
-        #Option     "Dac6Bit"            	# [<bool>]
-        #Option     "DRI"                	# [<bool>]
-        #Option     "NoDDC"              	# [<bool>]
-        #Option     "ShowCache"          	# [<bool>]
-        #Option     "XvMCSurfaces"       	# <i>
-        #Option     "PageFlip"           	# [<bool>]
-	Option      "DRI" "False"
-	#Option      "AccelMethod" "exa"
-	#Option      "MigrationHeuristic" "greedy"
-	#Option      "ExaNoComposite" "False"
-	Identifier  "Card0"
-	Driver      "intel"
-EndSection
-
-Section "Screen"
-	Identifier "Screen0"
-	Device     "Card0"
-	Monitor    "Monitor0"
-	SubSection "Display"
-		Viewport   0 0
-		Depth     1
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     4
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     8
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     15
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     16
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     24
-	EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
-	Identifier     "X.org Configured"
-	Screen      0  "Screen0" 0 0
-EndSection
-
-Section "Device"
-        ### Available Driver options are:-
-        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
-        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
-        ### [arg]: arg optional
-        #Option     "NoAccel"            	# [<bool>]
-        #Option     "SWcursor"           	# [<bool>]
-        #Option     "ColorKey"           	# <i>
-        #Option     "CacheLines"         	# <i>
-        #Option     "Dac6Bit"            	# [<bool>]
-        #Option     "DRI"                	# [<bool>]
-        #Option     "NoDDC"              	# [<bool>]
-        #Option     "ShowCache"          	# [<bool>]
-        #Option     "XvMCSurfaces"       	# <i>
-        #Option     "PageFlip"           	# [<bool>]
-	Option      "DRI" "False"
-	#Option      "AccelMethod" "exa"
-	#Option      "MigrationHeuristic" "greedy"
-	#Option      "ExaNoComposite" "False"
-	Identifier  "Card0"
-	Driver      "intel"
-EndSection
-
-Section "Monitor"
-	Identifier  "Monitor0"
-	HorizSync   30.0 - 65.0
-	VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
-	Identifier "Screen0"
-	Device     "Card0"
-	Monitor    "Monitor0"
-	DefaultDepth 16
-	SubSection "Display"
-		Viewport   0 0
-		Depth     1
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     4
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     8
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     15
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     16
-		Modes     "1024x768" "800x600"
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     24
-	EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
-	Identifier     "X.org Configured"
-	Screen      0  "Screen0" 0 0
-EndSection
-
-Section "Device"
-	Identifier  "Card0"
-	Driver      "vesa"
-EndSection
-
-Section "Monitor"
-	Identifier  "Monitor0"
-	HorizSync   30.0 - 65.0
-	VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
-	Identifier "Screen0"
-	Device     "Card0"
-	Monitor    "Monitor0"
-	DefaultDepth 16
-	SubSection "Display"
-		Viewport   0 0
-		Depth     1
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     4
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     8
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     15
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     16
-		Modes     "1024x768" "800x600"
-	EndSubSection
-	SubSection "Display"
-		Viewport   0 0
-		Depth     24
-	EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps
deleted file mode 100644
index 64bb6b7..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps
+++ /dev/null
@@ -1 +0,0 @@
-30
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf
deleted file mode 100644
index ddd88f8..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# fbsplash.conf
-#
-
-THEMES="linhes"
-SPLASH_TTYS="1 2 3 4 5 6"
-
-#EOF
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
deleted file mode 100644
index 7f8f011..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
+++ /dev/null
@@ -1 +0,0 @@
-7
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow
deleted file mode 100644
index 19bc4d8..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# /etc/hosts.allow
-#
-
-ALL: 127.0.0.1
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-# To allow ssh in from local net (example)
-#sshd: 192.168.178.0/255.255.255.0
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab
deleted file mode 100644
index 39003ed..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-#  Runlevels:
-#    0    Halt
-#    1(S)   Single-user
-#    2    Not used
-#    3    Multi-user
-#    4    Not used
-#    5    X11
-#    6    Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:3:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-#  Runlevels:
-#    0    Halt
-#    1(S)   Single-user
-#    2    Not used
-#    3    Multi-user
-#    4    Not used
-#    5    X11
-#    6    Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
-    :
-}
-
-f_swapoff ()
-{
-    ############################# Include session saving functions
-  #  . /opt/larch-live/session-save/shutdown2
-   # if [ -f /tmp/checkse ]; then
-    #    . /tmp/checkse
-    #else
-     #   checkse
-   # fi
-
-    if [ -n "${saving}" ] && ! session_save; then
-        echo
-        echo "If you know what you are doing, you may be able to recover"
-        echo "something from this unpleasant situation."
-        echo
-        echo "You may use the command line to investigate further ..."
-        echo
-        echo "When finished please enter 'exit', the shutdown process will"
-        echo "then continue."
-        sh -i
-    fi
-
-    #############################
-
-    stat_busy "Deactivating Swap"
-    /sbin/swapoff -a
-    stat_done
-}
-
-f_remountro ()
-{
-    if [ -n "${ejectdev}" ]; then
-        echo "Ejecting live CD"
-        eject ${ejectdev}
-        echo "sleeping for 6 seconds"
-        sleep 6
-    
-    fi
-}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-# 
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-#   egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link.  This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it.  0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map).  The characters to be escaped are
-# specified as a list of hex numbers separated by commas.  Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified.  The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines.  On Ultrix, this option implies hardware
-# flow control, as for the crtscts option.  (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128.  The default MRU value is 1500.  A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP.  With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation.  With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d).  If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form.  The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)).  (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes.  For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver.  The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection.  Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel.  /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present. 
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file.  Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer. 
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc.  When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received.  Note: it is not advisable to use this option with the persist
-# option without the demand option.  If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates.  This option only has any effect if the persist or demand
-# option is used.  The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer.  At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet.  The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local
deleted file mode 100755
index 2d488a2..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-. /etc/rc.conf
-. /etc/rc.d/functions
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-
-function mysql_check {
-	mysql -e "show databases;" 2>/dev/null >/dev/null
-	return $?
-}
-
-function mythconverg_check {
-    mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null
-    return $?
-}
-
-function install_db {
-    pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null
-    pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null
-}
-
-
-
-
-#check to see if mysql is running
-stat_busy "Checking Mysql"
-ATTEMPT=0
-mysql_check && printhl "    Installing the initial database" &&install_db
-mythconverg_check
-status=$?
-while [ ! $status = 0  ]
-do
-    ((ATTEMPT=ATTEMPT+1))
-    /etc/rc.d/mysqld stop
-    sleep 2
-    /etc/rc.d/mysqld start
-    mysqlstatus=$?
-    if [ $mysqlstatus = 0 ]
-    then
-	mysql_check && install_db
-	mythconverg_check
-        status=$?
-    fi
-    if [ $ATTEMPT = 20 ]
-    then
-	printhl "   Could not start mysql or install mythconverg within 20 attempts"
-	printhl "   Aborting install"
-	exit 20
-    fi
-done
-stat_done
-
-#check network parms
-stat_busy "Checking network"
-init_network
-stat_done
-
-stat_busy "Probing network"
-request_dhcp &
-stat_done
-
-#save some cmdline options
-stat_busy "Parsing command line"
-parse_cmdline_2_db
-bootsplash_setup
-stat_done
-
-#search for remote
-stat_busy "Checking for remote"
-init_remote
-stat_done
-printhl "Finished"
-
-
-echo $CMDLINE | grep -qi NoX
-if [ $? = 0 ]
-then
-    echo ""
-    printhl "No auto X option found"
-   # /usr/bin/chvt 2
-else
-    /root/startx &
-fi
-
-
-# Set up automatically logged in user
-if [ -f /.livesys/autologin ]; then
-    cp /.livesys/autologin /tmp/newuser
-fi
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig
deleted file mode 100755
index 47b24ef..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-# Restore saved sound volume, etc.
-alsactl restore
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown
deleted file mode 100755
index 2b5f735..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local.shutdown: Local shutdown script.
-#
-
-# Save sound volume, etc.
-alsactl store
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile
deleted file mode 100644
index 600bd9b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc
deleted file mode 100644
index c6febe5..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf
deleted file mode 100644
index 35ed579..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path        ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver     /usr/bin/X
-xserver_arguments   -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd            /sbin/shutdown -h now
-reboot_cmd          /sbin/shutdown -r now
-console_cmd         /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd        /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path         /usr/bin/xauth 
-
-# Xauth file for server
-authfile           /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock             on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor          false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd           exec /bin/sh - ~/.xinitrc %session
-login_cmd           exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd	some command
-# sessionstop_cmd	some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon	yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions            xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd      import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg         Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg       The system is halting...
-reboot_msg         The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user        simone
-
-# current theme, use comma separated list to specify a set to 
-# randomly choose from
-current_theme       dlarch
-
-# Lock file
-lockfile            /var/lock/slim.lock
-
-# Log file
-logfile             /var/log/slim.log
-