add profiles for larch 7

23 files changed, 1037 insertions, 0 deletions

diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
new file mode 100755
index 0000000..8e3ec5e
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
@@ -0,0 +1,22 @@
+if grep -v nox /proc/cmdline &>/dev/null && \
+        [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
+    if grep i810 /proc/cmdline &>/dev/null; then
+        startx -- -config xorg.conf.i810
+    else
+        startx
+    fi
+
+    # Maybe there should be some code here to handle a failed startx?
+    
+    # The 'return' value is at /tmp/xlogout
+    # If there is nothing there, switch user to 'newuser'
+    # If there is also nothing there, login as root
+    #    - if already root, fall through to terminal
+    
+    if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
+        logout    
+    elif [ ${UID} -ne 0 ]; then
+        echo "root" >/tmp/newuser
+        logout
+    fi
+fi
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
new file mode 100755
index 0000000..5f04171
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
@@ -0,0 +1,4 @@
+# Set the keymap
+xkmap-set
+
+exec fluxbox
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf
new file mode 100755
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+	Identifier  "Card0"
+	Driver      "vesa"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
new file mode 100755
index 0000000..9615569
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
@@ -0,0 +1,59 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+        ### Available Driver options are:-
+        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+        ### [arg]: arg optional
+        #Option     "NoAccel"            	# [<bool>]
+        #Option     "SWcursor"           	# [<bool>]
+        #Option     "ColorKey"           	# <i>
+        #Option     "CacheLines"         	# <i>
+        #Option     "Dac6Bit"            	# [<bool>]
+        #Option     "DRI"                	# [<bool>]
+        #Option     "NoDDC"              	# [<bool>]
+        #Option     "ShowCache"          	# [<bool>]
+        #Option     "XvMCSurfaces"       	# <i>
+        #Option     "PageFlip"           	# [<bool>]
+	Option      "DRI" "False"
+	#Option      "AccelMethod" "exa"
+	#Option      "MigrationHeuristic" "greedy"
+	#Option      "ExaNoComposite" "False"
+	Identifier  "Card0"
+	Driver      "intel"
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
new file mode 100755
index 0000000..a295b38
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
@@ -0,0 +1,67 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+        ### Available Driver options are:-
+        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+        ### [arg]: arg optional
+        #Option     "NoAccel"            	# [<bool>]
+        #Option     "SWcursor"           	# [<bool>]
+        #Option     "ColorKey"           	# <i>
+        #Option     "CacheLines"         	# <i>
+        #Option     "Dac6Bit"            	# [<bool>]
+        #Option     "DRI"                	# [<bool>]
+        #Option     "NoDDC"              	# [<bool>]
+        #Option     "ShowCache"          	# [<bool>]
+        #Option     "XvMCSurfaces"       	# <i>
+        #Option     "PageFlip"           	# [<bool>]
+	Option      "DRI" "False"
+	#Option      "AccelMethod" "exa"
+	#Option      "MigrationHeuristic" "greedy"
+	#Option      "ExaNoComposite" "False"
+	Identifier  "Card0"
+	Driver      "intel"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
new file mode 100755
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+	Identifier  "Card0"
+	Driver      "vesa"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd
new file mode 100755
index 0000000..ab53c30
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd
@@ -0,0 +1,6 @@
+#
+# Arguments to be passed to the DHCP client daemon
+#
+
+DHCPCD_ARGS="-t 10 -h $HOSTNAME"
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
new file mode 100755
index 0000000..64bb6b7
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
@@ -0,0 +1 @@
+30
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
new file mode 100755
index 0000000..ddd88f8
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
@@ -0,0 +1,8 @@
+#
+# fbsplash.conf
+#
+
+THEMES="linhes"
+SPLASH_TTYS="1 2 3 4 5 6"
+
+#EOF
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
new file mode 100755
index 0000000..7f8f011
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
@@ -0,0 +1 @@
+7
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow
new file mode 100755
index 0000000..19bc4d8
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow
@@ -0,0 +1,13 @@
+#
+# /etc/hosts.allow
+#
+
+ALL: 127.0.0.1
+
+# To allow ssh in from anywhere
+sshd: ALL
+
+# To allow ssh in from local net (example)
+#sshd: 192.168.178.0/255.255.255.0
+
+# End of file
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab
new file mode 100755
index 0000000..b2364fc
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab
@@ -0,0 +1,39 @@
+#
+# /etc/inittab
+#
+
+#  Runlevels:
+#    0    Halt
+#    1(S)   Single-user
+#    2    Not used
+#    3    Multi-user
+#    4    Not used
+#    5    X11
+#    6    Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:3:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/ulogin
+c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+#x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave
new file mode 100755
index 0000000..2de483f
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave
@@ -0,0 +1,43 @@
+#
+# /etc/inittab
+#
+
+#  Runlevels:
+#    0    Halt
+#    1(S)   Single-user
+#    2    Not used
+#    3    Multi-user
+#    4    Not used
+#    5    X11
+#    6    Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:5:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
+c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
+c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+#x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown
new file mode 100755
index 0000000..d614d4b
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown
@@ -0,0 +1,47 @@
+# Functions used by rc.shutdown
+# Modified versions for larch live systems
+
+f_saveclock ()
+{
+    :
+}
+
+f_swapoff ()
+{
+    ############################# Include session saving functions
+  #  . /opt/larch-live/session-save/shutdown2
+   # if [ -f /tmp/checkse ]; then
+    #    . /tmp/checkse
+    #else
+     #   checkse
+   # fi
+
+    if [ -n "${saving}" ] && ! session_save; then
+        echo
+        echo "If you know what you are doing, you may be able to recover"
+        echo "something from this unpleasant situation."
+        echo
+        echo "You may use the command line to investigate further ..."
+        echo
+        echo "When finished please enter 'exit', the shutdown process will"
+        echo "then continue."
+        sh -i
+    fi
+
+    #############################
+
+    stat_busy "Deactivating Swap"
+    /sbin/swapoff -a
+    stat_done
+}
+
+f_remountro ()
+{
+    if [ -n "${ejectdev}" ]; then
+        echo "Ejecting live CD"
+        eject ${ejectdev}
+        echo "sleeping for 6 seconds"
+        sleep 6
+    
+    fi
+}
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
new file mode 100755
index 0000000..0a9b572
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
@@ -0,0 +1,65 @@
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES="piix ide_disk reiserfs"
+MODULES=""
+
+# BINARIES
+# This setting includes, into the CPIO image, and additional
+# binaries a given user may wish.  This is run first, so may
+# be used to override the actual binaries used in a given hook.
+# (Existing files are NOT overwritten is already added)
+# BINARIES are dependancy parsed, so you may safely ignore libraries
+BINARIES=""
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in anyway.  This is useful for config files.
+# Some users may wish to include modprobe.conf for custom module options,
+# like so:
+#    FILES="/etc/modprobe.conf"
+FILES=""
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+#    This setup specifies all modules in the MODULES setting above.
+#    No raid, lvm2, or encrypted root is needed.
+#    HOOKS="base"
+#
+#    This setup will autodetect all modules for your system and should
+#    work as a sane default
+#    HOOKS="base udev autodetect pata scsi sata filesystems"
+#
+#    This is identical to the above, except the old ide subsystem is
+#    used for IDE devices instead of the new pata subsystem.
+#    HOOKS="base udev autodetect ide scsi sata filesystems"
+#
+#    This setup will generate a 'full' image which supports most systems.
+#    No autodetection is done.
+#    HOOKS="base udev pata scsi sata usb filesystems"
+#
+#    This setup assembles an pata raid array with an encrypted root FS.
+#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
+#    HOOKS="base udev pata raid encrypt filesystems"
+#
+#    This setup loads an lvm2 volume group on a usb device.
+#    HOOKS="base udev usb lvm2 filesystems"
+HOOKS="base udev autodetect pata scsi sata filesystems larch1 larch2_aufs larch3 fbsplash"
+
+# COMPRESSION
+# Use this to compress the initramfs image. With kernels earlier than
+# 2.6.30, only gzip is supported, which is also the default. Newer kernels
+# support gzip, bzip2 and lzma.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options
new file mode 100755
index 0000000..237c390
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options
@@ -0,0 +1,352 @@
+# /etc/ppp/options
+# 
+# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
+# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
+# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
+# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
+#
+# To quickly see what options are active in this file, use this command:
+#   egrep -v '#|^ *$' /etc/ppp/options
+
+# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
+# Two Servers can be remotely configured
+# ms-dns 192.168.1.1
+# ms-dns 192.168.1.2
+
+# Specify which WINS Servers the incoming connection Win95 or WinNT should use
+# ms-wins 192.168.1.50
+# ms-wins 192.168.1.51
+
+# Run the executable or shell command specified after pppd has
+# terminated the link.  This script could, for example, issue commands
+# to the modem to cause it to hang up if hardware modem control signals
+# were not available.
+#disconnect "chat -- \d+++\d\c OK ath0 OK"
+
+# async character map -- 32-bit hex; each bit is a character
+# that needs to be escaped for pppd to receive it.  0x00000001
+# represents '\x01', and 0x80000000 represents '\x1f'.
+asyncmap 0
+
+# Require the peer to authenticate itself before allowing network
+# packets to be sent or received.
+# Please do not disable this setting. It is expected to be standard in
+# future releases of pppd. Use the call option (see manpage) to disable
+# authentication for specific peers.
+#auth
+
+# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
+# on the serial port.
+crtscts
+
+# Use software flow control (i.e. XON/XOFF) to control the flow of data
+# on the serial port.
+#xonxoff
+
+# Specifies that certain characters should be escaped on transmission
+# (regardless of whether the peer requests them to be escaped with its
+# async control character map).  The characters to be escaped are
+# specified as a list of hex numbers separated by commas.  Note that
+# almost any character can be specified for the escape option, unlike
+# the asyncmap option which only allows control characters to be
+# specified.  The characters which may not be escaped are those with hex
+# values 0x20 - 0x3f or 0x5e.
+#escape 11,13,ff
+
+# Don't use the modem control lines.
+#local
+
+# Specifies that pppd should use a UUCP-style lock on the serial device
+# to ensure exclusive access to the device.
+lock
+
+# Don't show the passwords when logging the contents of PAP packets.
+# This is the default.
+hide-password
+
+# When logging the contents of PAP packets, this option causes pppd to
+# show the password string in the log message.
+#show-password
+
+# Use the modem control lines.  On Ultrix, this option implies hardware
+# flow control, as for the crtscts option.  (This option is not fully
+# implemented.)
+modem
+
+# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
+# will ask the peer to send packets of no more than <n> bytes. The
+# minimum MRU value is 128.  The default MRU value is 1500.  A value of
+# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
+# bytes of data).
+#mru 542
+
+# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
+# notation (e.g. 255.255.255.0).
+#netmask 255.255.255.0
+
+# Disables the default behaviour when no local IP address is specified,
+# which is to determine (if possible) the local IP address from the
+# hostname. With this option, the peer will have to supply the local IP
+# address during IPCP negotiation (unless it specified explicitly on the
+# command line or in an options file).
+#noipdefault
+
+# Enables the "passive" option in the LCP.  With this option, pppd will
+# attempt to initiate a connection; if no reply is received from the
+# peer, pppd will then just wait passively for a valid LCP packet from
+# the peer (instead of exiting, as it does without this option).
+#passive
+
+# With this option, pppd will not transmit LCP packets to initiate a
+# connection until a valid LCP packet is received from the peer (as for
+# the "passive" option with old versions of pppd).
+#silent
+
+# Don't request or allow negotiation of any options for LCP and IPCP
+# (use default values).
+#-all
+
+# Disable Address/Control compression negotiation (use default, i.e.
+# address/control field disabled).
+#-ac
+
+# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
+# all control characters).
+#-am
+
+# Don't fork to become a background process (otherwise pppd will do so
+# if a serial device is specified).
+#-detach
+
+# Disable IP address negotiation (with this option, the remote IP
+# address must be specified with an option on the command line or in
+# an options file).
+#-ip
+
+# Disable IPCP negotiation and IP communication. This option should
+# only be required if the peer is buggy and gets confused by requests
+# from pppd for IPCP negotiation.
+#noip
+
+# Disable magic number negotiation.  With this option, pppd cannot
+# detect a looped-back line.
+#-mn
+
+# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
+# 1500).
+#-mru
+
+# Disable protocol field compression negotiation (use default, i.e.
+# protocol field compression disabled).
+#-pc
+
+# Require the peer to authenticate itself using PAP.
+#+pap
+
+# Don't agree to authenticate using PAP.
+#-pap
+
+# Require the peer to authenticate itself using CHAP [Cryptographic
+# Handshake Authentication Protocol] authentication.
+#+chap
+
+# Don't agree to authenticate using CHAP.
+#-chap
+
+# Disable negotiation of Van Jacobson style IP header compression (use
+# default, i.e. no compression).
+#-vj
+
+# Increase debugging level (same as -d).  If this option is given, pppd
+# will log the contents of all control packets sent or received in a
+# readable form.  The packets are logged through syslog with facility
+# daemon and level debug. This information can be directed to a file by
+# setting up /etc/syslog.conf appropriately (see syslog.conf(5)).  (If
+# pppd is compiled with extra debugging enabled, it will log messages
+# using facility local2 instead of daemon).
+#debug
+
+# Append the domain name <d> to the local host name for authentication
+# purposes.  For example, if gethostname() returns the name porsche,
+# but the fully qualified domain name is porsche.Quotron.COM, you would
+# use the domain option to set the domain name to Quotron.COM.
+#domain <d>
+
+# Enable debugging code in the kernel-level PPP driver.  The argument n
+# is a number which is the sum of the following values: 1 to enable
+# general debug messages, 2 to request that the contents of received
+# packets be printed, and 4 to request that the contents of transmitted
+# packets be printed.
+#kdebug n
+
+# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
+# requests a smaller value via MRU negotiation, pppd will request that
+# the kernel networking code send data packets of no more than n bytes
+# through the PPP network interface.
+#mtu <n>
+
+# Set the name of the local system for authentication purposes to <n>.
+# This is a privileged option. With this option, pppd will use lines in the
+# secrets files which have <n> as the second field when looking for a
+# secret to use in authenticating the peer. In addition, unless overridden
+# with the user option, <n> will be used as the name to send to the peer
+# when authenticating the local system to the peer. (Note that pppd does
+# not append the domain name to <n>.)
+#name <n>
+
+# Enforce the use of the hostname as the name of the local system for
+# authentication purposes (overrides the name option).
+#usehostname
+
+# Set the assumed name of the remote system for authentication purposes
+# to <n>.
+#remotename <n>
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system.
+proxyarp
+
+# Use the system password database for authenticating the peer using
+# PAP. Note: mgetty already provides this option. If this is specified
+# then dialin from users using a script under Linux to fire up ppp wont work.
+# login
+
+# If this option is given, pppd will send an LCP echo-request frame to the
+# peer every n seconds. Normally the peer should respond to the echo-request
+# by sending an echo-reply. This option can be used with the
+# lcp-echo-failure option to detect that the peer is no longer connected.
+lcp-echo-interval 30
+
+# If this option is given, pppd will presume the peer to be dead if n
+# LCP echo-requests are sent without receiving a valid LCP echo-reply.
+# If this happens, pppd will terminate the connection.  Use of this
+# option requires a non-zero value for the lcp-echo-interval parameter.
+# This option can be used to enable pppd to terminate after the physical
+# connection has been broken (e.g., the modem has hung up) in
+# situations where no hardware modem control lines are available.
+lcp-echo-failure 4
+
+# Set the LCP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#lcp-restart <n>
+
+# Set the maximum number of LCP terminate-request transmissions to <n>
+# (default 3).
+#lcp-max-terminate <n>
+
+# Set the maximum number of LCP configure-request transmissions to <n>
+# (default 10).
+#lcp-max-configure <n>
+
+# Set the maximum number of LCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#lcp-max-failure <n>
+
+# Set the IPCP restart interval (retransmission timeout) to <n>
+# seconds (default 3).
+#ipcp-restart <n>
+
+# Set the maximum number of IPCP terminate-request transmissions to <n>
+# (default 3).
+#ipcp-max-terminate <n>
+
+# Set the maximum number of IPCP configure-request transmissions to <n>
+# (default 10).
+#ipcp-max-configure <n>
+
+# Set the maximum number of IPCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#ipcp-max-failure <n>
+
+# Set the PAP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#pap-restart <n>
+
+# Set the maximum number of PAP authenticate-request transmissions to
+# <n> (default 10).
+#pap-max-authreq <n>
+
+# Set the maximum time that pppd will wait for the peer to authenticate
+# itself with PAP to <n> seconds (0 means no limit).
+#pap-timeout <n>
+
+# Set the CHAP restart interval (retransmission timeout for
+# challenges) to <n> seconds (default 3).
+#chap-restart <n>
+
+# Set the maximum number of CHAP challenge transmissions to <n>
+# (default 10).
+#chap-max-challenge
+
+# If this option is given, pppd will rechallenge the peer every <n>
+# seconds.
+#chap-interval <n>
+
+# With this option, pppd will accept the peer's idea of our local IP
+# address, even if the local IP address was specified in an option.
+#ipcp-accept-local
+
+# With this option, pppd will accept the peer's idea of its (remote) IP
+# address, even if the remote IP address was specified in an option.
+#ipcp-accept-remote
+
+# Disable the IPXCP and IPX protocols.
+# To let pppd pass IPX packets comment this out --- you'll probably also
+# want to install ipxripd, and have the Internal IPX Network option enabled
+# in your kernel.  /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
+noipx
+
+# Exit once a connection has been made and terminated. This is the default,
+# unless the `persist' or `demand' option has been specified.
+#nopersist
+
+# Do not exit after a connection is terminated; instead try to reopen
+# the connection.
+#persist
+
+# Terminate after n consecutive failed connection attempts.
+# A value of 0 means no limit. The default value is 10.
+#maxfail <n>
+
+# Initiate the link only on demand, i.e. when data traffic is present. 
+# With this option, the remote IP address must be specified by the user on
+# the command line or in an options file.  Pppd will initially configure
+# the interface and enable it for IP traffic without connecting to the peer. 
+# When traffic is available, pppd will connect to the peer and perform
+# negotiation, authentication, etc.  When this is completed, pppd will
+# commence passing data packets (i.e., IP packets) across the link.
+#demand
+
+# Specifies that pppd should disconnect if the link is idle for <n> seconds.
+# The link is idle when no data packets (i.e. IP packets) are being sent or
+# received.  Note: it is not advisable to use this option with the persist
+# option without the demand option.  If the active-filter option is given,
+# data packets which are rejected by the specified activity filter also
+# count as the link being idle.
+#idle <n>
+
+# Specifies how many seconds to wait before re-initiating the link after
+# it terminates.  This option only has any effect if the persist or demand
+# option is used.  The holdoff period is not applied if the link was
+# terminated because it was idle.
+#holdoff <n>
+
+# Wait for up n milliseconds after the connect script finishes for a valid
+# PPP packet from the peer.  At the end of this time, or when a valid PPP
+# packet is received from the peer, pppd will commence negotiation by
+# sending its first LCP packet.  The default value is 1000 (1 second).
+# This wait period only applies if the connect or pty option is used.
+#connect-delay <n>
+
+# Packet filtering: for more information, see pppd(8)
+# Any packets matching the filter expression will be interpreted as link
+# activity, and will cause a "demand" connection to be activated, and reset
+# the idle connection timer. (idle option)
+# The filter expression is akin to that of tcpdump(1)
+#active-filter <filter-expression>
+
+# uncomment the line below this if you use PPPoE
+#plugin /usr/lib/pppd/plugins/pppoe.so
+
+# ---<End of File>---
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local
new file mode 100755
index 0000000..2d488a2
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local
@@ -0,0 +1,93 @@
+#!/bin/bash
+#
+# /etc/rc.local: Local multi-user startup script.
+#
+. /etc/rc.conf
+. /etc/rc.d/functions
+. /etc/profile
+. ${MV_ROOT}/bin/install_functions.sh
+
+function mysql_check {
+	mysql -e "show databases;" 2>/dev/null >/dev/null
+	return $?
+}
+
+function mythconverg_check {
+    mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null
+    return $?
+}
+
+function install_db {
+    pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null
+    pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null
+}
+
+
+
+
+#check to see if mysql is running
+stat_busy "Checking Mysql"
+ATTEMPT=0
+mysql_check && printhl "    Installing the initial database" &&install_db
+mythconverg_check
+status=$?
+while [ ! $status = 0  ]
+do
+    ((ATTEMPT=ATTEMPT+1))
+    /etc/rc.d/mysqld stop
+    sleep 2
+    /etc/rc.d/mysqld start
+    mysqlstatus=$?
+    if [ $mysqlstatus = 0 ]
+    then
+	mysql_check && install_db
+	mythconverg_check
+        status=$?
+    fi
+    if [ $ATTEMPT = 20 ]
+    then
+	printhl "   Could not start mysql or install mythconverg within 20 attempts"
+	printhl "   Aborting install"
+	exit 20
+    fi
+done
+stat_done
+
+#check network parms
+stat_busy "Checking network"
+init_network
+stat_done
+
+stat_busy "Probing network"
+request_dhcp &
+stat_done
+
+#save some cmdline options
+stat_busy "Parsing command line"
+parse_cmdline_2_db
+bootsplash_setup
+stat_done
+
+#search for remote
+stat_busy "Checking for remote"
+init_remote
+stat_done
+printhl "Finished"
+
+
+echo $CMDLINE | grep -qi NoX
+if [ $? = 0 ]
+then
+    echo ""
+    printhl "No auto X option found"
+   # /usr/bin/chvt 2
+else
+    /root/startx &
+fi
+
+
+# Set up automatically logged in user
+if [ -f /.livesys/autologin ]; then
+    cp /.livesys/autologin /tmp/newuser
+fi
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown
new file mode 100755
index 0000000..2b5f735
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown
@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+# /etc/rc.local.shutdown: Local shutdown script.
+#
+
+# Save sound volume, etc.
+alsactl store
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile
new file mode 100755
index 0000000..600bd9b
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile
@@ -0,0 +1,3 @@
+. $HOME/.bashrc
+
+. /etc/X11/xinit/startx.custom
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc
new file mode 100755
index 0000000..fcabce0
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc
@@ -0,0 +1,3 @@
+alias ls='ls --color=auto'
+PS1='[\u@\h \W]\$ '
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc
new file mode 100755
index 0000000..c6febe5
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+#
+# ~/.xinitrc
+#
+# Executed by startx (run your window manager from here)
+#
+
+# exec gnome-session
+# exec startkde
+# exec startxfce4
+# exec icewm
+# exec openbox
+# exec blackbox
+exec fluxbox
+# exec ratpoison
+# exec dwm
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession
new file mode 100755
index 0000000..a16dc0b
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+#
+# ~/.xsession
+#
+# Executed by xdm/gdm/kdm at login
+#
+
+/bin/bash --login -i ~/.xinitrc
+
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf
new file mode 100755
index 0000000..35ed579
--- /dev/null
+++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf
@@ -0,0 +1,79 @@
+# Path, X server and arguments (if needed)
+# Note: -xauth $authfile is automatically appended
+default_path        ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
+default_xserver     /usr/bin/X
+xserver_arguments   -nolisten tcp vt07
+
+# Commands for halt, login, etc.
+halt_cmd            /sbin/shutdown -h now
+reboot_cmd          /sbin/shutdown -r now
+console_cmd         /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
+#suspend_cmd        /usr/sbin/suspend
+
+# Full path to the xauth binary
+xauth_path         /usr/bin/xauth 
+
+# Xauth file for server
+authfile           /var/run/slim.auth
+
+
+# Activate numlock when slim starts. Valid values: on|off
+# numlock             on
+
+# Hide the mouse cursor (note: does not work with some WMs).
+# Valid values: true|false
+# hidecursor          false
+
+# This command is executed after a succesful login.
+# you can place the %session and %theme variables
+# to handle launching of specific commands in .xinitrc
+# depending of chosen session and slim theme
+#
+# NOTE: if your system does not have bash you need
+# to adjust the command according to your preferred shell,
+# i.e. for freebsd use:
+# login_cmd           exec /bin/sh - ~/.xinitrc %session
+login_cmd           exec /bin/bash -login ~/.xinitrc %session
+
+# Commands executed when starting and exiting a session.
+# They can be used for registering a X11 session with
+# sessreg. You can use the %user variable
+#
+# sessionstart_cmd	some command
+# sessionstop_cmd	some command
+
+# Start in daemon mode. Valid values: yes | no
+# Note that this can overridden by the command line
+# option "-d"
+# daemon	yes
+
+# Available sessions (first one is the default).
+# The current chosen session name is replaced in the login_cmd
+# above, so your login command can handle different sessions.
+# see the xinitrc.sample file shipped with slim sources
+sessions            xfce4,icewm,wmaker,blackbox
+
+# Executed when pressing F11 (requires imagemagick)
+screenshot_cmd      import -window root /slim.png
+
+# welcome message. Available variables: %host, %domain
+welcome_msg         Welcome to %host
+
+# shutdown / reboot messages
+shutdown_msg       The system is halting...
+reboot_msg         The system is rebooting...
+
+# default user, leave blank or remove this line
+# for avoid pre-loading the username.
+#default_user        simone
+
+# current theme, use comma separated list to specify a set to 
+# randomly choose from
+current_theme       dlarch
+
+# Lock file
+lockfile            /var/lock/slim.lock
+
+# Log file
+logfile             /var/log/slim.log
+