larch8: profile sync. featuring all new splash screens

13 files changed, 12 insertions, 622 deletions

diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/dhcpcd b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/dhcpcd
index ab53c30..ab53c30 100755..100644
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/dhcpcd
+++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/conf.d/dhcpcd
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/hosts.allow b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/hosts.allow
index 19bc4d8..f8cc8f5 100755..100644
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/hosts.allow
+++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/hosts.allow
@@ -5,7 +5,7 @@
 ALL: 127.0.0.1
 
 # To allow ssh in from anywhere
-sshd: ALL
+#sshd: ALL
 
 # To allow ssh in from local net (example)
 #sshd: 192.168.178.0/255.255.255.0
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larch.orig
index b2364fc..4b5bb7a 100755..100644
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab
+++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larch.orig
@@ -24,14 +24,17 @@ rh:06:wait:/etc/rc.shutdown
 su:S:wait:/sbin/sulogin -p
 
 # -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/ulogin
+c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/loginroot
 c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
 c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
 
 ca::ctrlaltdel:/sbin/shutdown -t3 -r now
 
 # Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
+x:5:respawn:/usr/bin/xdm -nodaemon
 #x:5:respawn:/usr/sbin/gdm -nodaemon
 #x:5:respawn:/opt/kde/bin/kdm -nodaemon
 #x:5:respawn:/usr/bin/slim >& /dev/null
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larchsave b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larchsave
deleted file mode 100755
index 2de483f..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-#  Runlevels:
-#    0    Halt
-#    1(S)   Single-user
-#    2    Not used
-#    3    Multi-user
-#    4    Not used
-#    5    X11
-#    6    Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/larch-shutdown b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/larch-shutdown
deleted file mode 100755
index d614d4b..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
-    :
-}
-
-f_swapoff ()
-{
-    ############################# Include session saving functions
-  #  . /opt/larch-live/session-save/shutdown2
-   # if [ -f /tmp/checkse ]; then
-    #    . /tmp/checkse
-    #else
-     #   checkse
-   # fi
-
-    if [ -n "${saving}" ] && ! session_save; then
-        echo
-        echo "If you know what you are doing, you may be able to recover"
-        echo "something from this unpleasant situation."
-        echo
-        echo "You may use the command line to investigate further ..."
-        echo
-        echo "When finished please enter 'exit', the shutdown process will"
-        echo "then continue."
-        sh -i
-    fi
-
-    #############################
-
-    stat_busy "Deactivating Swap"
-    /sbin/swapoff -a
-    stat_done
-}
-
-f_remountro ()
-{
-    if [ -n "${ejectdev}" ]; then
-        echo "Ejecting live CD"
-        eject ${ejectdev}
-        echo "sleeping for 6 seconds"
-        sleep 6
-    
-    fi
-}
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/locale.gen b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/locale.gen
new file mode 100644
index 0000000..3bceedc
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/locale.gen
@@ -0,0 +1,6 @@
+# locales for larch (/etc/locale.gen)
+
+en_US.UTF-8  UTF-8
+en_GB.UTF-8  UTF-8
+de_DE.UTF-8  UTF-8
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
deleted file mode 100755
index 0a9b572..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch
+++ /dev/null
@@ -1,65 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run.  Advanced users may wish to specify all system modules
-# in this array.  For instance:
-#     MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish.  This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway.  This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-#    FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file.  The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-#    This setup specifies all modules in the MODULES setting above.
-#    No raid, lvm2, or encrypted root is needed.
-#    HOOKS="base"
-#
-#    This setup will autodetect all modules for your system and should
-#    work as a sane default
-#    HOOKS="base udev autodetect pata scsi sata filesystems"
-#
-#    This is identical to the above, except the old ide subsystem is
-#    used for IDE devices instead of the new pata subsystem.
-#    HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-#    This setup will generate a 'full' image which supports most systems.
-#    No autodetection is done.
-#    HOOKS="base udev pata scsi sata usb filesystems"
-#
-#    This setup assembles an pata raid array with an encrypted root FS.
-#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
-#    HOOKS="base udev pata raid encrypt filesystems"
-#
-#    This setup loads an lvm2 volume group on a usb device.
-#    HOOKS="base udev usb lvm2 filesystems"
-HOOKS="base udev autodetect pata scsi sata filesystems larch1 larch2_aufs larch3 fbsplash"
-
-# COMPRESSION
-# Use this to compress the initramfs image. With kernels earlier than
-# 2.6.30, only gzip is supported, which is also the default. Newer kernels
-# support gzip, bzip2 and lzma.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/ppp/options b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/ppp/options
deleted file mode 100755
index 237c390..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-# 
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-#   egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link.  This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it.  0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map).  The characters to be escaped are
-# specified as a list of hex numbers separated by commas.  Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified.  The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines.  On Ultrix, this option implies hardware
-# flow control, as for the crtscts option.  (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128.  The default MRU value is 1500.  A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP.  With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation.  With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d).  If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form.  The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)).  (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes.  For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver.  The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection.  Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel.  /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present. 
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file.  Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer. 
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc.  When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received.  Note: it is not advisable to use this option with the persist
-# option without the demand option.  If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates.  This option only has any effect if the persist or demand
-# option is used.  The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer.  At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet.  The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bash_profile b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bash_profile
deleted file mode 100755
index 600bd9b..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bashrc b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bashrc
deleted file mode 100755
index fcabce0..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xinitrc b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xinitrc
deleted file mode 100755
index c6febe5..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xsession b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/slim.conf b/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/slim.conf
deleted file mode 100755
index 35ed579..0000000
--- a/build_tools/larch8/larch0/profiles/linhes-local-disk-testing-i686/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path        ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver     /usr/bin/X
-xserver_arguments   -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd            /sbin/shutdown -h now
-reboot_cmd          /sbin/shutdown -r now
-console_cmd         /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd        /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path         /usr/bin/xauth 
-
-# Xauth file for server
-authfile           /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock             on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor          false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd           exec /bin/sh - ~/.xinitrc %session
-login_cmd           exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd	some command
-# sessionstop_cmd	some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon	yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions            xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd      import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg         Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg       The system is halting...
-reboot_msg         The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user        simone
-
-# current theme, use comma separated list to specify a set to 
-# randomly choose from
-current_theme       dlarch
-
-# Lock file
-lockfile            /var/lock/slim.lock
-
-# Log file
-logfile             /var/log/slim.log
-