larch8: first checkin, still needs some work

50 files changed, 1667 insertions, 0 deletions

diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks
new file mode 100755
index 0000000..1f0c1a5
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/addedpacks
@@ -0,0 +1,229 @@
+# These are needed to build a live CD
+#linhes-live
+squashfs-tools
+lzop
+
+syslinux
+
+# You need a kernel.
+#kernel26 is now in 'base'
+aufs2
+
+# To eject a cd
+eject
+
+# Useful for use as installer, etc.
+#ntfsprogs
+#parted
+
+#ddcxinfo-knoppix
+#hwd
+
+sudo
+
+lsof
+cdrkit
+dvd+rw-tools
+
+
+# generally useful tools which don't require X
+#mtools is required by syslinux
+openssh
+dosfstools
+alsa-lib
+alsa-oss
+alsa-utils
+cdparanoia
+cdrdao
+unzip
+
+
+# Xorg packages
+*xorg
+#xorg-server
+#xorg-xkb-utils
+#xorg-xauth
+#xorg-server-utils
+#xorg-xinit
+#xorg-input-drivers
+#xorg-apps
+#xorg-fonts-100dpi
+#xorg-fonts-75dpi
+#xorg-res-utils
+ttf-ms-fonts
+
+#xorg-video-drivers
+xf86-video-amd
+xf86-video-apm
+xf86-video-ark
+xf86-video-ati
+xf86-video-chips
+xf86-video-cirrus
+xf86-video-dummy
+xf86-video-fbdev
+xf86-video-glint
+xf86-video-i128
+xf86-video-i740
+#xf86-video-i810
+#xf86-video-imstt
+xf86-video-intel
+xf86-video-mga
+xf86-video-neomagic
+xf86-video-nv
+xf86-video-openchrome
+xf86-video-radeonhd
+xf86-video-rendition
+xf86-video-s3
+xf86-video-s3virge
+xf86-video-savage
+xf86-video-siliconmotion
+xf86-video-sis
+xf86-video-sisusb
+#xf86-video-tdfx
+xf86-video-trident
+xf86-video-tseng
+#unichrome is busted and causes X to segfault
+#xf86-video-unichrome
+xf86-video-v4l
+xf86-video-vesa
+#vga should not be installed, vesa can handle when other drivers fail
+#xf86-video-vga
+#xf86-video-via
+xf86-video-vmware
+xf86-video-voodoo
+
+# X apps
+#luser
+#localed
+unclutter
+xterm
+xorg-apps
+#xkmap
+
+#gparted
+#larchin
+
+#mythtv
+mythtv
+mythtv-contrib
+mythplugins-mytharchive
+mythplugins-mythbrowser
+#mythcontrols
+#mythflix
+mythplugins-mythgallery
+mythplugins-mythgame
+mythplugins-mythmusic
+#mythphone
+myththemes
+#mythweather
+mythplugins-mythvideo
+mythsmolt
+#morethemes
+linhes-theme
+linhes-scripts
+nuvexport
+lirc
+lirc-utils
+mysql
+xmltv
+esound
+
+#Window Manager
+fluxbox
+feh
+
+#Other
+dbus
+hal
+fftw2
+libcdaudio
+iptables
+pkgconfig
+taglib
+#portmap
+ivtv-utils
+#dvb-firmware
+dbus-python
+
+#MythVantage Installer deps
+bc
+mysql-python
+expect
+curl
+dnsutils
+avahi
+
+#Wireless
+b43-fwcutter
+#ipw2100-fw
+#ipw2200-fw
+#ipw3945
+#ipw3945-ucode
+#ipw3945d
+madwifi
+madwifi-utils
+ndiswrapper
+ndiswrapper-utils
+#netcfg
+tiacx
+tiacx-firmware
+wireless_tools
+#wlan-ng26
+#wlan-ng26-utils
+zd1211-firmware
+hdhomerun
+#----
+LinHES-config
+LinHES-system
+linhes-sounds
+etcnet
+runit
+runit-scripts
+media_dirs
+
+#---
+tweaker
+ethtool
+nfs-utils
+netkit-telnet
+ntp
+syslog-ng
+ppp
+mingetty
+setserial
+acpid
+fbsplash
+linhes-splash
+nvram-wakup
+#tatir
+pvr150-firmware
+wol
+mjpegtools
+perl-net-upnp
+aumix
+tablet-encode
+ntfs-3g
+joyutils
+ffmpeg-svn
+#myth2ipod
+myt2xvid3
+mediaserv
+
+#---Firewire
+libraw1394
+libavc1394
+# wrapper for mplayer
+mplayer-wrapper
+
+# in-place commercial remover (for user job)
+# moved to linhes-scripts
+#removecommercials
+
+#Modules for Atheros base NICs
+#atl1e
+
+linux-firmware
+
+larch-live
+mkinitcpio-busybox
+windowmaker-crm-git
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cachepacks b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cachepacks
new file mode 100755
index 0000000..4e9a790
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cachepacks
@@ -0,0 +1,59 @@
+mythdb-initial
+nvidia
+nvidia-utils
+vdpauinfo
+nvidia-96xx
+nvidia-96xx-utils
+#vdpinfo-96xx
+lighttpd
+local-website
+mythplugins-mythweb
+nfs-utils
+samba
+mplayer
+xine-ui
+lcdproc
+mythappletrailers
+mythstream
+oss
+xscreensaver
+tightvnc
+
+#added from error log
+mysql
+mythplugins-mythnews
+pycairo
+pygobject
+python-numeric
+pygtk
+fam
+sqlite3
+xe
+romdb
+gconf
+gnome-keyring
+gnome-mime-data
+gnome-python
+gnome-python-extras
+gnome-vfs
+hunspell
+libbonobo
+libbonoboui
+libgnome
+libgnomecanvas
+libgnomeui
+libidl2
+miro
+mozilla-common
+nspr
+nss
+orbit2
+polkit
+pyorbit
+pyrex
+startup-notification
+xulrunner
+#mythmovies
+#myth2ipod
+myt2xvid3
+#mediaserv
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/bkgd.jpg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/bkgd.jpg
new file mode 100644
index 0000000..b45b71f
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/bkgd.jpg
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/isolinux.cfg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/isolinux.cfg
new file mode 100644
index 0000000..9427635
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/isolinux.cfg
@@ -0,0 +1,25 @@
+default vesamenu.c32
+prompt 0
+timeout 50
+
+MENU BACKGROUND vbg.jpg
+
+MENU TITLE larch live medium
+
+
+label linux
+MENU LABEL LinHES (default).
+kernel /boot/vmlinuz26
+append  initrd=/boot/larch.img
+#append  vga=0x314 quiet splash=silent,theme:linhes console=tty1
+
+
+comment:
+title: Default larch by jm
+options:
+
+###LARCH - the larch boot lines will be inserted here
+
+label memtest
+MENU LABEL Memory tester
+kernel /boot/memtest
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/vbg.jpg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/vbg.jpg
new file mode 100644
index 0000000..e6d46f4
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux.sortaworks/vbg.jpg
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/debugsub.cfg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/debugsub.cfg
new file mode 100644
index 0000000..3fc8ec5
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/debugsub.cfg
@@ -0,0 +1,44 @@
+default vesamenu.c32
+prompt 0
+#timeout 300
+
+MENU BACKGROUND vbg.jpg
+MENU COLOR border 31;40      #90ffff00 #00000000 std
+MENU COLOR sel 31;47      #00000000   #FFFFFF15  al
+MENU ROWS 4
+MENU CMDLINEROW 22
+#MENU TIMEOUTROW 23
+MENU TABMSGROW 22
+
+MENU TITLE LinHES: The Linux Home Entertainment System
+
+
+label linux-nox
+MENU LABEL Boot to console (without X windowing)
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img NoX
+
+label skipTweaker
+MENU LABEL LinHES no splashscren no tweaker.
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img no_meth
+
+
+label linux-c2r
+MENU LABEL LinHES: copy-to-ram (also activates swap)
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img c2r
+
+label linux-swap
+MENU LABEL LinHES: Use swap
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img swap
+
+label memtest
+MENU LABEL Memory tester
+kernel memtest
+
+label goback
+MENU LABEL  Back
+kernel vesamenu.c32
+append menu isolinux.cfg
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/hardsub.cfg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/hardsub.cfg
new file mode 100644
index 0000000..1acef86
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/hardsub.cfg
@@ -0,0 +1,53 @@
+default vesamenu.c32
+prompt 0
+#timeout 300
+
+MENU BACKGROUND vbg.jpg
+MENU COLOR border 31;40      #90ffff00 #00000000 std
+MENU COLOR sel 31;47      #00000000   #FFFFFF15  al
+MENU ROWS 4
+MENU CMDLINEROW 22
+MENU TABMSGROW 22
+
+MENU TITLE LinHES: The Linux Home Entertainment System
+
+label atomic
+MENU LABEL LinHES on Atomic Ant!
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart,intel_agp
+
+#label linux-i810
+#MENU LABEL with Intel i810 driver (DRI disabled)
+#kernel vmlinuz26
+#append initrd=larch.img i810
+
+label linux-vesa
+MENU LABEL Force use of vesa driver 
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img forceXvesa
+
+
+label dragon
+MENU LABEL Dragon Version 1
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img type=dragon vga=0x314 quiet splash=silent,theme:linhes console=tty1
+
+label dragon2
+MENU LABEL Dragon Version 2
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img type=dragon2 vga=0x314 quiet splash=silent,theme:linhes console=tty1
+
+label ausdragon
+MENU LABEL Australian Dragon 
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img type=ausdragon vga=0x314 quiet splash=silent,theme:linhes console=tty1
+
+label 8400
+MENU LABEL For the Nvidia 8400 chipset.
+kernel /boot/vmlinuz26
+append initrd=/boot/larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart
+
+label goback
+MENU LABEL  Back
+kernel vesamenu.c32
+append menu isolinux.cfg
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/isolinux.cfg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/isolinux.cfg
new file mode 100644
index 0000000..8e43534
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/isolinux.cfg
@@ -0,0 +1,37 @@
+default vesamenu.c32
+prompt 0
+timeout 300
+
+MENU BACKGROUND vbg.jpg
+MENU COLOR border 31;40      #90ffff00 #00000000 std
+MENU COLOR sel 31;47      #00000000   #FFFFFF15  al
+MENU ROWS 4
+MENU CMDLINEROW 22
+MENU TIMEOUTROW 23
+MENU TABMSGROW 22
+
+MENU TITLE LinHES: The Linux Home Entertainment System
+
+label linux
+MENU LABEL LinHES (default).
+kernel /boot/vmlinuz26
+append  initrd=/boot/larch.img vga=0x314 quiet splash=silent,theme:linhes console=tty1
+
+label linux-nosplash
+MENU LABEL LinHES without splash screen.
+kernel /boot/vmlinux26
+append  initrd=/boot/larch.img 
+
+label special
+MENU LABEL Special Hardware
+kernel vesamenu.c32
+append hardsub.cfg
+
+label debug
+MENU LABEL Debug options
+kernel vesamenu.c32
+append debugsub.cfg
+
+label local
+menu label Boot from ^local drive
+localboot 0xffff
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/vbg.jpg b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/vbg.jpg
new file mode 100644
index 0000000..e6d46f4
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/boot/isolinux/vbg.jpg
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/delarch b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/delarch
new file mode 100644
index 0000000..71babb8
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/cd-root/larch/delarch
@@ -0,0 +1,24 @@
+# This is a script called from the installation script fix-system2.
+# Its purpose is to remove custom live-only stuff from a just-installed
+# system.
+
+# $1 is the path to the installed system root directory.
+
+INSTALL=$1
+if [ -z "${INSTALL}" ] || [ ! -f /etc/rc.conf ]; then
+    echo "ERROR: delarch installation adjustments failed:"
+    echo "      Please check installation mount point (${INSTALL})"
+    exit 1
+fi
+
+rm -f "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
+rm -f "${INSTALL}/root/Desktop/Larch Documentation.desktop"
+
+sed "s|^autologin|#autologin|" -i "${INSTALL}/etc.schlim.conf"
+
+if [ -f ${INSTALL}/etc/rc.local.orig ]; then
+    mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
+fi
+if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
+    mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
+fi
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pacman.conf.repos b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pacman.conf.repos
new file mode 100755
index 0000000..0aa3c75
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pacman.conf.repos
@@ -0,0 +1,15 @@
+# Package repository entries for pacman.conf
+# '*platform*' will be replaced by 'i686' or 'x86_64' as appropriate.
+# '*default*' will be replaced by 'Include = /etc/pacman.d/mirrorlist'
+# (but for the installation: a 'mirrorlist' file in the working directory will
+# be preferred, or - if neither exists - then 'data/mirrorlist')
+
+# You can add your own custom repositories (anywhere).
+
+#larch: 		Server = ftp://ftp.berlios.de/pub/larch/larch7.2/*platform*
+larch: 		Server = http://linhes.org/repo//larch/larch8/i686
+
+core-testing:       Server = http://localmirror/repo/i686/core-testing
+extra-testing:      Server = http://localmirror/repo/i686/extra-testing
+#core-testing:       Server = file:///data/pkg_repo/i686/core-testing
+#extra-testing:      Server = file:///data/pkg_repo/i686/extra-testing
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post-process.sh b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post-process.sh
new file mode 100755
index 0000000..883d9ad
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post-process.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+echo $@
+INSTDIR=$1
+PROFILE=$2
+
+#everything below this point is specific to MythVantage
+cp -rp $PROFILE/post_process $INSTDIR/.post_process
+chroot $INSTDIR .post_process/modify_chroot.sh
+rm -rf  $INSTDIR/.post_process
+
+#find the size of the install.
+#This is used to calculate progress on the install
+tsize=`du -sm $INSTDIR/ | cut -f1`
+echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
+upsize=`du -sm --exclude data   $INSTDIR/ |cut -f1`
+echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bash_profile b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bash_profile
new file mode 100755
index 0000000..c49349b
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bash_profile
@@ -0,0 +1 @@
+. $HOME/.bashrc
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bashrc b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bashrc
new file mode 100755
index 0000000..fcabce0
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.bashrc
@@ -0,0 +1,3 @@
+alias ls='ls --color=auto'
+PS1='[\u@\h \W]\$ '
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/apps b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/apps
new file mode 100755
index 0000000..d976fe8
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/apps
@@ -0,0 +1,5 @@
+#Uncomment below if you are using firewire
+#[startup] {/usr/bin/plugctl -n 0 "oPCR[0].n_p2pconnections=1"}
+#[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
+[startup] {wmsetbg  ~/.fluxbox/wallpaper.png}
+[startup] {/usr/LH/bin/LinHES-run}
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/init b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/init
new file mode 100755
index 0000000..9791a7f
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/init
@@ -0,0 +1,35 @@
+session.screen0.slit.placement:	BottomRight
+session.screen0.slit.direction:	Vertical
+session.screen0.slit.onTop:	False
+session.screen0.slit.autoHide:  True
+session.screen0.tab.placement:	Top
+session.screen0.toolbar.onTop:	False
+session.screen0.toolbar.visible:	False
+session.screen0.toolbar.autoHide:	False
+session.screen0.toolbar.placement:	BottomCenter
+session.screen0.toolbar.widthPercent:	66
+session.screen0.workspaceNames:	one,two,three,four
+session.screen0.strftimeFormat:	%k:%M
+session.screen0.focusNewWindows:	True
+session.screen0.focusModel:	ClickToFocus
+session.screen0.fullMaximization:	False
+session.screen0.edgeSnapThreshold:	0
+session.screen0.rowPlacementDirection:	LeftToRight
+session.screen0.workspaces:	4
+session.screen0.focusLastWindow:	True
+session.screen0.colPlacementDirection:	TopToBottom
+session.screen0.windowPlacement:	RowSmartPlacement
+session.screen0.tab.width:	64
+session.screen0.tab.height:	16
+session.screen0.showwindowposition: true
+session.opaqueMove:	False
+session.autoRaiseDelay:	250
+session.menuFile:	~/.fluxbox/menu
+session.cacheLife:	5
+session.styleFile:	/usr/share/fluxbox/styles/Artwiz
+session.keyFile: ~/.fluxbox/keys
+session.colorsPerChannel:	4
+session.doubleClickInterval:	250
+session.cacheMax:	200
+session.imageDither:	True
+session.configVersion:	1
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menu b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menu
new file mode 100755
index 0000000..858090e
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menu
@@ -0,0 +1,81 @@
+# Generated by fluxbox-generate_menu
+#
+# If you read this it means you want to edit this file manually, so here
+# are some useful tips:
+#
+# - You can add your own menu-entries to ~/.fluxbox/usermenu
+#
+# - If you miss apps please let me know and I will add them for the next
+#   release.
+#
+# - The -r option prevents removing of empty menu entries and lines which
+#   makes things much more readable.
+#
+# - To prevent any other app from overwriting your menu
+#   you can change the menu name in .fluxbox/init to:
+#     session.menuFile: /home/mythtv/.fluxbox/my-menu
+[begin] (Fluxbox)
+[encoding] {UTF-8}
+      [exec] (xterm) {xterm} 
+      [exec] () {} execname is NULL; cannot lookup
+      [exec]   (Run) {fbrun } 
+[submenu] (Terminals)
+      [exec]   (xterm) {xterm} 
+[end]
+[submenu] (Editors)
+      [exec]   (xedit) {xedit} 
+      [exec]   (nano) {xterm -e nano} 
+      [exec]   (vi) {xterm -e vi} 
+[end]
+[submenu] (Multimedia)
+[submenu] (Audio)
+      [exec]   (alsamixer) {xterm -e alsamixer} 
+[end]
+[submenu] (Video)
+      [exec]   (gmplayer) {gmplayer} 
+[end]
+[submenu] (X-utils)
+      [exec]   (xfontsel) {xfontsel} 
+      [exec]   (xman) {xman} 
+      [exec]   (xload) {xload} 
+      [exec]   (xbiff) {xbiff} 
+      [exec]   (xclock) {xclock} 
+      [exec]   (xmag) {xmag} 
+      [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults} 
+[end]
+[end]
+[submenu] (Office)
+      [exec]   (xclock) {xclock} 
+      [exec]   (xcalc) {xcalc} 
+[end]
+[submenu] (Games)
+      [exec]   (xeyes) {xeyes} 
+[end]
+[submenu] (System Tools)
+      [exec]   (top) {xterm -e top} 
+[end]
+[submenu] (fluxbox menu)
+      [config] (Configure) 
+[submenu] (System Styles) {Choose a style...}
+      [stylesdir] (/usr/share/fluxbox/styles) 
+[end]
+[submenu] (User Styles) {Choose a style...}
+      [stylesdir] (~/.fluxbox/styles) 
+[end]
+      [workspaces] (Workspace List) 
+[submenu] (Tools)
+      [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center} 
+      [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg} 
+      [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png} 
+      [exec] (Run) {fbrun } 
+      [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu } 
+[end]
+      [commanddialog] (Fluxbox Command) 
+      [reconfig] (Reload config) 
+      [restart] (Restart) 
+      [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center} 
+      [separator] 
+      [exit] (Exit) 
+[end]
+[endencoding]
+[end]
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig
new file mode 100755
index 0000000..ef5b398
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/menuconfig
@@ -0,0 +1,65 @@
+# This file is read by fluxbox-generate_menu.  If you don't like a
+# default you can change it here.  Don't forget to remove the # in front
+# of the line.
+
+# Your favourite terminal. Put the command in quotes if you want to use
+# options. Put a backslash in before odd chars
+# MY_TERM='Eterm --tint \#123456'
+# MY_TERM='aterm -tint $(random_color)'
+
+# Your favourite browser. You can also specify options.
+# MY_BROWSER=mozilla
+
+# Name of the outputfile
+# MENUFILENAME=/home/mythtv/.fluxbox/menu
+
+# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
+
+# standard url for console-browsers
+# HOMEPAGE=fluxbox.org
+
+# location with your own menu-entries
+# USERMENU=~/.fluxbox/usermenu
+
+# Put the launcher you would like to use here
+# LAUNCHER=fbrun
+# LAUNCHER=fbgm
+
+# Options for fbrun
+# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
+
+# --- PREFIX'es
+# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
+# your prefix is: /usr
+
+# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
+# there should be no need to specify them.
+#
+# PREFIX=/usr
+# GNOME_PREFIX=/opt/gnome
+# KDE_PREFIX=/opt/kde
+
+
+# Sepparate the list of background-dirs with semicolumns ':'
+# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
+
+
+# --- Boolean variables.
+# Setting a variable to no'' won't help. Comment them out if you don't
+# want them.  Setting are overruled by the command-line options.
+
+# Include all backgrounds in your backgrounds-directory
+# BACKGROUNDMENUITEM=yes
+
+# Include kde-menus
+# KDEMENU=yes
+
+# Include gnome-menus
+# GNOMEMENU=yes
+
+# enable sudo commands
+# DOSUDO=yes
+
+# Don't cleanup the menu
+# REMOVE=no
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
new file mode 100755
index 0000000..83da80c
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.fluxbox/wallpaper.png
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xinitrc b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xinitrc
new file mode 100755
index 0000000..911e76e
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xinitrc
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+#
+# ~/.xinitrc
+#
+# Executed by startx (run your window manager from here)
+#
+
+# exec gnome-session
+# exec startkde
+# exec startxfce4
+# exec icewm
+# exec openbox
+# exec blackbox
+exec fluxbox
+# exec ratpoison
+# exec dwm
+# ... or any other WM of your choosing ...
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xsession b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xsession
new file mode 100755
index 0000000..a16dc0b
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/home/mythtv/.xsession
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+#
+# ~/.xsession
+#
+# Executed by xdm/gdm/kdm at login
+#
+
+/bin/bash --login -i ~/.xinitrc
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.allow b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.allow
new file mode 100755
index 0000000..f6cf005
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.allow
@@ -0,0 +1,8 @@
+#
+# /etc/hosts.allow
+#
+ALL: 192.168.
+ALL: 10. 
+ALL: 127.0.0.1
+ALL: 172.16.
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.deny b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.deny
new file mode 100755
index 0000000..ca30ab4
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/hosts.deny
@@ -0,0 +1,6 @@
+#
+# /etc/hosts.deny
+#
+ALL
+
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/menu.lst b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/menu.lst
new file mode 100755
index 0000000..8a8e3b2
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/menu.lst
@@ -0,0 +1,60 @@
+# Config file for GRUB - The GNU GRand Unified Bootloader
+# /boot/grub/menu.lst
+
+# DEVICE NAME CONVERSIONS
+#
+#  Linux           Grub
+# -------------------------
+#  /dev/fd0        (fd0)
+#  /dev/hda        (hd0)
+#  /dev/hdb2       (hd1,1)
+#  /dev/hda3       (hd0,2)
+#
+
+#  FRAMEBUFFER RESOLUTION SETTINGS
+#     +-------------------------------------------------+
+#          | 640x480    800x600    1024x768   1280x1024
+#      ----+--------------------------------------------
+#      256 | 0x301=769  0x303=771  0x305=773   0x307=775
+#      32K | 0x310=784  0x313=787  0x316=790   0x319=793
+#      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
+#      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
+#     +-------------------------------------------------+
+
+# general configuration:
+timeout   5
+default   0
+#color light-blue/black light-cyan/blue
+
+# boot sections follow
+# each is implicitly numbered from 0 in the order of appearance below
+#
+# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
+#
+#-*
+hiddenmenu
+
+# (0) normal
+title  LinHes
+root   (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit  console=tty1
+initrd /boot/kernel26.img
+
+# (1) bootsplash
+title  LinHes-splashy
+root   (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet  vga=0x314 splash=silent,theme:linhes console=tty1
+initrd /boot/kernel26.img
+
+# (2) noautologin
+title  LinHES-nologin
+root   (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet  vga=0x314 splash=silent,theme:linhes console=tty1 nox
+initrd /boot/kernel26.img
+
+
+# (3) normal
+title  LinHes-init
+root   (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro  console=tty1
+initrd /boot/kernel26.img
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/modify_chroot.sh b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/modify_chroot.sh
new file mode 100755
index 0000000..ad83b2c
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/modify_chroot.sh
@@ -0,0 +1,15 @@
+#!/bin/bash
+echo "larch5" > /etc/hostname
+useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
+cp -rvpf /.post_process/home/mythtv  /home/
+cp -rvpf /.post_process/home/mythtv/.fluxbox /root
+chown -R mythtv.mythtv /home/mythtv/
+chown -R mythtv.mythtv /myth
+
+cp -f /.post_process/hosts.allow /etc/hosts.allow
+cp -f /.post_process/rc.conf /etc/rc.conf
+#cp -f /.post_process/rc.shutdown /etc/rc.shutdown
+cp -f /.post_process/menu.lst /boot/grub/menu.lst
+
+cp -f /etc/skel/.bash* /root/
+rm -f /etc/ssh/ssh_host*key*
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.conf b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.conf
new file mode 100755
index 0000000..9c17944
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.conf
@@ -0,0 +1,112 @@
+#
+# /etc/rc.conf - Main Configuration for Arch Linux
+#
+
+#
+# -----------------------------------------------------------------------
+# LOCALIZATION
+# -----------------------------------------------------------------------
+#
+# LOCALE: available languages can be listed with the 'locale -a' command
+# HARDWARECLOCK: set to "UTC" or "localtime"
+# TIMEZONE: timezones are found in /usr/share/zoneinfo
+# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
+# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
+# CONSOLEMAP: found in /usr/share/kbd/consoletrans
+# USECOLOR: use ANSI color sequences in startup messages
+#
+LOCALE="en_US.utf8"
+HARDWARECLOCK="UTC"
+TIMEZONE="US/Central"
+KEYMAP="us"
+CONSOLEFONT=
+CONSOLEMAP=
+USECOLOR="yes"
+
+#
+# -----------------------------------------------------------------------
+# HARDWARE
+# -----------------------------------------------------------------------
+#
+# Scan hardware and load required modules at bootup
+MOD_AUTOLOAD="yes"
+if [ -f /etc/systemconfig ]
+then
+	. /etc/systemconfig
+fi
+
+if [ x$Audiotype  = xOSS  -a  !  -f /tmp/.alsatest  ]
+then
+ ALSABLACKLIST="!soundcore"
+else
+	if [ x$Audiotype = xOSS ]
+	then
+	   ALSABLACKLIST="!soundcore"
+	else
+	    ALSABLACKLIST=""
+	fi
+fi
+
+# Module Blacklist - modules in this list will never be loaded by udev
+MOD_BLACKLIST_=($ALSABLACKLIST !snd-pcsp )
+#
+# Modules to load at boot-up (in this order)
+#   - prefix a module with a ! to blacklist it
+#
+MODULES=($MOD_BLACKLIST_)
+# Scan for LVM volume groups at startup, required if you use LVM
+USELVM="no"
+
+#
+# -----------------------------------------------------------------------
+# NETWORKING
+# -----------------------------------------------------------------------
+#
+HOSTNAME=`cat /etc/hostname`
+
+#The following is only used on the install. After the first boot everything is set from /etc/net.
+
+
+#
+# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
+# interfaces.
+#
+# Interfaces to start at boot-up (in this order)
+# Declare each interface then list in INTERFACES
+#   - prefix an entry in INTERFACES with a ! to disable it
+#   - no hyphens in your interface names - Bash doesn't like it
+#
+# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
+#
+lo="lo 127.0.0.1"
+#eth0="dhcp"
+INTERFACES=(lo )
+#
+# Routes to start at boot-up (in this order)
+# Declare each route then list in ROUTES
+#   - prefix an entry in ROUTES with a ! to disable it
+#
+gateway="default gw 192.168.0.1"
+ROUTES=(!gateway)
+#
+# Enable these network profiles at boot-up.  These are only useful
+# if you happen to need multiple network configurations (ie, laptop users)
+#   - set to 'menu' to present a menu during boot-up (dialog package required)
+#   - prefix an entry with a ! to disable it
+#
+# Network profiles are found in /etc/network-profiles
+#
+#NET_PROFILES=(main)
+
+#
+# -----------------------------------------------------------------------
+# DAEMONS
+# -----------------------------------------------------------------------
+#
+# Daemons to start at boot-up (in this order)
+#   - prefix a daemon with a ! to disable it
+#   - prefix a daemon with a @ to start it up in the background
+#
+#DAEMONS=(syslog-ng network netfs crond)
+DAEMONS=(fbsplash !syslog-ng !hotplug !pcmcia network !mysqld !dbus !avahi-daemon)
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.shutdown b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.shutdown
new file mode 100755
index 0000000..1a8cdbe
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/post_process/rc.shutdown
@@ -0,0 +1,104 @@
+#!/bin/bash
+#
+# /etc/rc.shutdown
+#
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+# avoid staircase effect
+/bin/stty onlcr
+
+echo " "
+printhl "Initiating Shutdown..."
+echo " "
+
+if [ -x /etc/rc.local.shutdown ]; then
+	/etc/rc.local.shutdown
+fi
+
+if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
+	# Shutdown daemons
+	let i=${#DAEMONS[@]}
+	while [[ i -ge 0 ]]; do
+		if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
+			/etc/rc.d/${DAEMONS[$i]#@} stop
+		fi
+		let i=i-1
+	done
+	# find any leftover daemons and shut them down
+	if [ -d /var/run/daemons ]; then
+		for daemon in `ls /var/run/daemons`; do
+			/etc/rc.d/$daemon stop
+		done
+	fi
+fi
+
+# Terminate all processes
+stat_busy "Sending SIGTERM To Processes"
+/sbin/killall5 -15 &> /dev/null
+/bin/sleep 5
+stat_done
+
+stat_busy "Sending SIGKILL To Processes"
+/sbin/killall5 -9 &> /dev/null
+/bin/sleep 1
+stat_done
+
+stat_busy "Saving Random Seed"
+/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
+stat_done
+
+stat_busy "Saving System Clock"
+if [ "$HARDWARECLOCK" = "UTC" ]; then
+	/sbin/hwclock --directisa --utc --systohc
+else
+	/sbin/hwclock --directisa --localtime --systohc
+fi
+stat_done
+
+# removing psmouse module to fix some reboot issues on newer laptops
+modprobe -r psmouse >/dev/null 2>&1
+
+# Write to wtmp file before unmounting
+/sbin/halt -w
+
+stat_busy "Deactivating Swap"
+/sbin/swapoff -a
+stat_done
+
+stat_busy "Unmounting Filesystems"
+/bin/umount -a
+stat_done
+
+if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
+	if [ -d /etc/lvm -a -x /sbin/lvm ]; then
+		/bin/mount -n -t sysfs none /sys 2>/dev/null
+		if [ -d /sys/block ]; then
+			stat_busy "Deactivating LVM2 groups"
+			/sbin/lvm vgchange --ignorelockingfailure -a n
+			stat_done
+			umount /sys
+		fi
+	fi
+fi
+
+stat_busy "Remounting Root Filesystem Read-only"
+/bin/mount -n -o remount,ro /
+stat_done
+exit 0
+# Power off or reboot
+if [ "$RUNLEVEL" = "0" ]; then
+	printsep
+	printhl "${C_H2}POWER OFF"
+	/sbin/poweroff -d -f -h -i
+else
+	printsep
+	printhl "${C_H2}REBOOTING"
+	# adding kexec support
+	[ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
+	/sbin/reboot -d -f -i
+fi
+
+# End of file
+# vim: set ts=2 noet:
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pre-process.sh b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pre-process.sh
new file mode 100755
index 0000000..5bc1f9c
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/pre-process.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+rm -f overlay.xpk
+if [ -d overlay/home/mythtv ]
+then
+	chown -R 1000 overlay/home/mythtv
+fi
+./create_overlay.sh
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
new file mode 100755
index 0000000..8e3ec5e
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/startx.custom
@@ -0,0 +1,22 @@
+if grep -v nox /proc/cmdline &>/dev/null && \
+        [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
+    if grep i810 /proc/cmdline &>/dev/null; then
+        startx -- -config xorg.conf.i810
+    else
+        startx
+    fi
+
+    # Maybe there should be some code here to handle a failed startx?
+    
+    # The 'return' value is at /tmp/xlogout
+    # If there is nothing there, switch user to 'newuser'
+    # If there is also nothing there, login as root
+    #    - if already root, fall through to terminal
+    
+    if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
+        logout    
+    elif [ ${UID} -ne 0 ]; then
+        echo "root" >/tmp/newuser
+        logout
+    fi
+fi
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
new file mode 100755
index 0000000..5f04171
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom
@@ -0,0 +1,4 @@
+# Set the keymap
+xkmap-set
+
+exec fluxbox
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf
new file mode 100755
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+	Identifier  "Card0"
+	Driver      "vesa"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
new file mode 100755
index 0000000..9615569
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810
@@ -0,0 +1,59 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+        ### Available Driver options are:-
+        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+        ### [arg]: arg optional
+        #Option     "NoAccel"            	# [<bool>]
+        #Option     "SWcursor"           	# [<bool>]
+        #Option     "ColorKey"           	# <i>
+        #Option     "CacheLines"         	# <i>
+        #Option     "Dac6Bit"            	# [<bool>]
+        #Option     "DRI"                	# [<bool>]
+        #Option     "NoDDC"              	# [<bool>]
+        #Option     "ShowCache"          	# [<bool>]
+        #Option     "XvMCSurfaces"       	# <i>
+        #Option     "PageFlip"           	# [<bool>]
+	Option      "DRI" "False"
+	#Option      "AccelMethod" "exa"
+	#Option      "MigrationHeuristic" "greedy"
+	#Option      "ExaNoComposite" "False"
+	Identifier  "Card0"
+	Driver      "intel"
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
new file mode 100755
index 0000000..a295b38
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2
@@ -0,0 +1,67 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+        ### Available Driver options are:-
+        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+        ### [arg]: arg optional
+        #Option     "NoAccel"            	# [<bool>]
+        #Option     "SWcursor"           	# [<bool>]
+        #Option     "ColorKey"           	# <i>
+        #Option     "CacheLines"         	# <i>
+        #Option     "Dac6Bit"            	# [<bool>]
+        #Option     "DRI"                	# [<bool>]
+        #Option     "NoDDC"              	# [<bool>]
+        #Option     "ShowCache"          	# [<bool>]
+        #Option     "XvMCSurfaces"       	# <i>
+        #Option     "PageFlip"           	# [<bool>]
+	Option      "DRI" "False"
+	#Option      "AccelMethod" "exa"
+	#Option      "MigrationHeuristic" "greedy"
+	#Option      "ExaNoComposite" "False"
+	Identifier  "Card0"
+	Driver      "intel"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
new file mode 100755
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+	Identifier     "X.org Configured"
+	Screen      0  "Screen0" 0 0
+EndSection
+
+Section "Device"
+	Identifier  "Card0"
+	Driver      "vesa"
+EndSection
+
+Section "Monitor"
+	Identifier  "Monitor0"
+	HorizSync   30.0 - 65.0
+	VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+	Identifier "Screen0"
+	Device     "Card0"
+	Monitor    "Monitor0"
+	DefaultDepth 16
+	SubSection "Display"
+		Viewport   0 0
+		Depth     1
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     4
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     8
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     15
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     16
+		Modes     "1024x768" "800x600"
+	EndSubSection
+	SubSection "Display"
+		Viewport   0 0
+		Depth     24
+	EndSubSection
+EndSection
+
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/dhcpcd b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/dhcpcd
new file mode 100644
index 0000000..ab53c30
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/dhcpcd
@@ -0,0 +1,6 @@
+#
+# Arguments to be passed to the DHCP client daemon
+#
+
+DHCPCD_ARGS="-t 10 -h $HOSTNAME"
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
new file mode 100755
index 0000000..64bb6b7
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps
@@ -0,0 +1 @@
+30
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
new file mode 100755
index 0000000..ddd88f8
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf
@@ -0,0 +1,8 @@
+#
+# fbsplash.conf
+#
+
+THEMES="linhes"
+SPLASH_TTYS="1 2 3 4 5 6"
+
+#EOF
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
new file mode 100755
index 0000000..7f8f011
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
@@ -0,0 +1 @@
+7
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/hosts.allow b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/hosts.allow
new file mode 100644
index 0000000..f8cc8f5
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/hosts.allow
@@ -0,0 +1,13 @@
+#
+# /etc/hosts.allow
+#
+
+ALL: 127.0.0.1
+
+# To allow ssh in from anywhere
+#sshd: ALL
+
+# To allow ssh in from local net (example)
+#sshd: 192.168.178.0/255.255.255.0
+
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch
new file mode 100755
index 0000000..2de483f
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch
@@ -0,0 +1,43 @@
+#
+# /etc/inittab
+#
+
+#  Runlevels:
+#    0    Halt
+#    1(S)   Single-user
+#    2    Not used
+#    3    Multi-user
+#    4    Not used
+#    5    X11
+#    6    Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:5:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
+c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
+c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+#x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch.orig b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch.orig
new file mode 100644
index 0000000..4b5bb7a
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/inittab.larch.orig
@@ -0,0 +1,42 @@
+#
+# /etc/inittab
+#
+
+#  Runlevels:
+#    0    Halt
+#    1(S)   Single-user
+#    2    Not used
+#    3    Multi-user
+#    4    Not used
+#    5    X11
+#    6    Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:3:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/loginroot
+c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/locale.gen b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/locale.gen
new file mode 100644
index 0000000..3bceedc
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/locale.gen
@@ -0,0 +1,6 @@
+# locales for larch (/etc/locale.gen)
+
+en_US.UTF-8  UTF-8
+en_GB.UTF-8  UTF-8
+de_DE.UTF-8  UTF-8
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.conf b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.conf
new file mode 100644
index 0000000..86519a9
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.conf
@@ -0,0 +1,97 @@
+#
+# /etc/rc.conf - Main Configuration for Arch Linux
+#
+
+# -----------------------------------------------------------------------
+# LOCALIZATION
+# -----------------------------------------------------------------------
+#
+# LOCALE: available languages can be listed with the 'locale -a' command
+# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
+#   in the hardware clock being left untouched (useful for virtualization)
+# TIMEZONE: timezones are found in /usr/share/zoneinfo
+# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
+# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
+# CONSOLEMAP: found in /usr/share/kbd/consoletrans
+# USECOLOR: use ANSI color sequences in startup messages
+#
+LOCALE="en_GB.UTF-8"
+HARDWARECLOCK="UTC"
+TIMEZONE="Europe/Berlin"
+KEYMAP="de"
+CONSOLEFONT=
+CONSOLEMAP=
+USECOLOR="yes"
+
+# -----------------------------------------------------------------------
+# HARDWARE
+# -----------------------------------------------------------------------
+#
+# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
+# MOD_BLACKLIST: Prevent udev from loading these modules
+# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
+#
+# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
+#
+MOD_AUTOLOAD="yes"
+#MOD_BLACKLIST=() #deprecated
+MODULES=()
+
+# Scan for LVM volume groups at startup, required if you use LVM
+USELVM="no"
+
+# -----------------------------------------------------------------------
+# NETWORKING
+# -----------------------------------------------------------------------
+#
+# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
+#
+HOSTNAME="larch8-mini"
+
+# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
+#
+# Interfaces to start at boot-up (in this order)
+# Declare each interface then list in INTERFACES
+#   - prefix an entry in INTERFACES with a ! to disable it
+#   - no hyphens in your interface names - Bash doesn't like it
+# 
+# DHCP:     Set your interface to "dhcp" (eth0="dhcp")
+# Wireless: See network profiles below
+#
+
+#Static IP example
+#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
+eth0="dhcp"
+INTERFACES=(eth0)
+
+# Routes to start at boot-up (in this order)
+# Declare each route then list in ROUTES
+#   - prefix an entry in ROUTES with a ! to disable it
+#
+gateway="default gw 192.168.0.1"
+ROUTES=(!gateway)
+ 
+# Setting this to "yes" will skip network shutdown.
+# This is required if your root device is on NFS.
+NETWORK_PERSIST="no"
+
+# Enable these network profiles at boot-up.  These are only useful
+# if you happen to need multiple network configurations (ie, laptop users)
+#   - set to 'menu' to present a menu during boot-up (dialog package required)
+#   - prefix an entry with a ! to disable it
+#
+# Network profiles are found in /etc/network.d
+#
+# This now requires the netcfg package
+#
+#NETWORKS=(main)
+
+# -----------------------------------------------------------------------
+# DAEMONS
+# -----------------------------------------------------------------------
+#
+# Daemons to start at boot-up (in this order)
+#   - prefix a daemon with a ! to disable it
+#   - prefix a daemon with a @ to start it up in the background
+#
+DAEMONS=(syslog-ng @network @sshd !crond)
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local
new file mode 100755
index 0000000..2d488a2
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local
@@ -0,0 +1,93 @@
+#!/bin/bash
+#
+# /etc/rc.local: Local multi-user startup script.
+#
+. /etc/rc.conf
+. /etc/rc.d/functions
+. /etc/profile
+. ${MV_ROOT}/bin/install_functions.sh
+
+function mysql_check {
+	mysql -e "show databases;" 2>/dev/null >/dev/null
+	return $?
+}
+
+function mythconverg_check {
+    mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null
+    return $?
+}
+
+function install_db {
+    pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null
+    pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null
+}
+
+
+
+
+#check to see if mysql is running
+stat_busy "Checking Mysql"
+ATTEMPT=0
+mysql_check && printhl "    Installing the initial database" &&install_db
+mythconverg_check
+status=$?
+while [ ! $status = 0  ]
+do
+    ((ATTEMPT=ATTEMPT+1))
+    /etc/rc.d/mysqld stop
+    sleep 2
+    /etc/rc.d/mysqld start
+    mysqlstatus=$?
+    if [ $mysqlstatus = 0 ]
+    then
+	mysql_check && install_db
+	mythconverg_check
+        status=$?
+    fi
+    if [ $ATTEMPT = 20 ]
+    then
+	printhl "   Could not start mysql or install mythconverg within 20 attempts"
+	printhl "   Aborting install"
+	exit 20
+    fi
+done
+stat_done
+
+#check network parms
+stat_busy "Checking network"
+init_network
+stat_done
+
+stat_busy "Probing network"
+request_dhcp &
+stat_done
+
+#save some cmdline options
+stat_busy "Parsing command line"
+parse_cmdline_2_db
+bootsplash_setup
+stat_done
+
+#search for remote
+stat_busy "Checking for remote"
+init_remote
+stat_done
+printhl "Finished"
+
+
+echo $CMDLINE | grep -qi NoX
+if [ $? = 0 ]
+then
+    echo ""
+    printhl "No auto X option found"
+   # /usr/bin/chvt 2
+else
+    /root/startx &
+fi
+
+
+# Set up automatically logged in user
+if [ -f /.livesys/autologin ]; then
+    cp /.livesys/autologin /tmp/newuser
+fi
+
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local.shutdown b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local.shutdown
new file mode 100755
index 0000000..2b5f735
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/etc/rc.local.shutdown
@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+# /etc/rc.local.shutdown: Local shutdown script.
+#
+
+# Save sound volume, etc.
+alsactl store
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bash_profile b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bash_profile
new file mode 100644
index 0000000..c49349b
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bash_profile
@@ -0,0 +1 @@
+. $HOME/.bashrc
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bashrc b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bashrc
new file mode 100644
index 0000000..3e5c29c
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/.bashrc
@@ -0,0 +1,2 @@
+alias ls='ls --color=auto'
+PS1='[\u@\h \W]\$ '
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/LinHES-install.sh b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/LinHES-install.sh
new file mode 100755
index 0000000..6acd24a
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/LinHES-install.sh
@@ -0,0 +1,34 @@
+#!/bin/bash
+#redirect stderr to stdout, then rediret stdout to file
+. /etc/profile
+exec 2>&1
+exec > /tmp/mythvantage_install.log
+#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
+#keylaunch &
+#/usr/bin/tilda &
+#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents  &
+export MALLOC_CHECK_=0
+xset s off
+xset -dpms
+xhost +
+
+CMDLINE=$(cat /proc/cmdline)
+echo $CMDLINE |grep -q nfsroot
+NFSROOT=$?
+echo $CMDLINE |grep -q clean_upgrade
+if [ $? = 0 ]
+then
+	export CLEAN_UPGRADE=YES
+else
+	export CLEAN_UPGRADE=NO
+fi
+MythVantage -r
+
+if  [ x$NFSROOT = x1  ]
+then
+    unbuffer  MythVantage &
+else
+    NETBOOT=YES     MythVantage &
+fi
+
+exec  fluxbox > /var/log/fluxbox.log 2>&1
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/startx b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/startx
new file mode 100755
index 0000000..9274703
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/rootoverlay/root/startx
@@ -0,0 +1,28 @@
+#!/bin/bash
+. /etc/profile
+
+export USER=root
+export HOME=/root
+
+CMDLINE=$(cat /proc/cmdline)
+TEMPVAR=${CMDLINE#*ip=}
+IP=${TEMPVAR%% *}
+echo $CMDLINE |grep -q vnc
+USEVNC=$?
+
+if [ x$USEVNC = x1 ]
+then
+        $MV_ROOT/bin/xconfig.sh 2>/dev/null
+        cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
+        startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log
+ else
+ #VNC
+     pacman -Sf --noconfirm tightvnc
+    cd /root
+    mkdir .vnc
+    echo mythvantage |vncpasswd -f > /root/.vnc/passwd
+    chmod 500 /root/.vnc/passwd
+    rm /root/.vnc/xstartup
+    ln -s /root/LinHES-install.sh /root/.vnc/xstartup
+    vncserver
+fi
diff --git a/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/vetopacks b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/vetopacks
new file mode 100755
index 0000000..2bb19ee
--- /dev/null
+++ b/build_tools/larch8/larch0/profiles/linhes-local-mirror-testing-i686/vetopacks
@@ -0,0 +1 @@
+#xorg-twm