diff options
Diffstat (limited to 'build_tools/clarch/larch/profiles/MV-local')
31 files changed, 0 insertions, 1749 deletions
diff --git a/build_tools/clarch/larch/profiles/MV-local/addedpacks b/build_tools/clarch/larch/profiles/MV-local/addedpacks deleted file mode 100644 index a04a8eb..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/addedpacks +++ /dev/null @@ -1,151 +0,0 @@ -# These are needed to build a live CD -#linhes-live -mythvantage-live -squashfs-tools -lzop - -syslinux - -# You need a kernel. -#kernel26 is now in 'base' -aufs - -# To eject a cd -eject - -# Useful for use as installer, etc. -ntfsprogs -parted -#ddcxinfo-knoppix -#hwd - -# generally useful tools which don't require X -openssh -dosfstools -lynx -#mc -unzip -zip - -lsof -#cdrkit -#dvd+rw-tools - -etcnet - -xorg -xorg-xinit -#xorg-video-drivers -xf86-video-amd -xf86-video-apm -xf86-video-ark -xf86-video-ati -xf86-video-chips -xf86-video-cirrus -xf86-video-dummy -xf86-video-fbdev -xf86-video-glint -xf86-video-i128 -xf86-video-i740 -#xf86-video-i810 -xf86-video-imstt -xf86-video-intel -xf86-video-mga -xf86-video-neomagic -xf86-video-nv -xf86-video-radeonhd -xf86-video-rendition -xf86-video-s3 -xf86-video-s3virge -xf86-video-savage -xf86-video-siliconmotion -xf86-video-sis -xf86-video-sisusb -#xf86-video-tdfx -xf86-video-trident -xf86-video-tseng -#unichrome is busted and causes X to segfault -#xf86-video-unichrome -xf86-video-v4l -xf86-video-vesa -#vga should not be installed, vesa can handle when other drivers fail -#xf86-video-vga -#xf86-video-via -xf86-video-vmware -xf86-video-voodoo - - - - - -#terminal -openssh -ntp -runit -runit-scripts-mv -mysql - -mythtv-release-fixes -mythtv-themes-release-fixes -mediadirsetup -lm_sensors -MythVantage-mythmenu -setserial -avahi -keylaunch -mysql-python -acpid - - -tilda -#opera -ivtv-utils -hd3000firmware -oss -alsa-utils - -make -python-iplib -#hdhgrab -hdhomerun - -#intel-e1000 -perl-dbi -perl-dbd-mysql -lcdproc -netkit-telnet -nfs-utils -jfsutils -xfsprogs - -patch -gdb -sudo -syslog-ng - -ttf-bitstream-vera -xine-lib - -syth-lacquer-wide -Midnight-wide -Midnight-blue -basic-blue -basic-green -basic-amber -basic-purple -basic-red - - -MythVantage-system -#live-installer -MythVantage-config -libstatgrab -nmbscan -smbclient - - - -enlightenment -e16-myth-settings -ttf-ms-fonts -dbus-python
\ No newline at end of file diff --git a/build_tools/clarch/larch/profiles/MV-local/baseveto b/build_tools/clarch/larch/profiles/MV-local/baseveto deleted file mode 100644 index 419aad4..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/baseveto +++ /dev/null @@ -1,7 +0,0 @@ -xfsprogs -xfsdump -jfsutils -kernel26STB -xf86-video-unichrome -xf86-video-via - diff --git a/build_tools/clarch/larch/profiles/MV-local/cache_packs b/build_tools/clarch/larch/profiles/MV-local/cache_packs deleted file mode 100644 index 782f3b5..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/cache_packs +++ /dev/null @@ -1,39 +0,0 @@ -#comment -xosd -local-website -webcalendar -lighttpd -mythdb-initial -samba -libmysqlclient -mysql -hobbitserver -hobbit-client -dnsmasq -mysql-clients -mythtv-status -avahi -dbus -myth2ipod -tightvnc -phpmyadmin -libgl-dri -mythphone-release-fixes -mytharchive-release-fixes -mythbrowser-release-fixes -mythnews-release-fixes -mythgame-release-fixes -mythflix-release-fixes -mythweather-release-fixes -mythcontrols-release-fixes -mythgallery-release-fixes -mythmovietime-release-fixes -mythmusic-release-fixes -mythsmolt-release-fixes -mythvideo-release-fixes -mythweb-release-fixes -alsa-lib -nvidia -nvidia-utils -nvidia-96xx -nvidia-96xx-utils diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg deleted file mode 100644 index a4c7998..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/isolinux.cfg +++ /dev/null @@ -1,38 +0,0 @@ -PROMPT 0 -TIMEOUT 40 -DEFAULT vesamenu.c32 -MENU BACKGROUND vbg.jpg -MENU TITLE MythVantage Boot options -MENU COLOR border 31;40 #90ffff00 #00000000 std -MENU COLOR sel 31;47 #00000000 #FFFFFF15 all - - -LABEL MythVantage -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto - -LABEL MythVantage-NoX -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto NoX - -LABEL MythVantage-Vnc -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netdev=eth0 - -LABEL MythVantage-dhcp -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto ip=dhcp netdev=eth0 - -LABEL MythVantage-remote -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto ip=dhcp remote=MX-500-jams remoteport=ttyS0 - -LABEL MythVantage-static-ip -KERNEL vmlinuz -APPEND vga=normal initrd=larch.img noauto vnc ip=192.168.1.222 netmask=255.255.0.0 gateway=192.168.1.1 netdev=eth0 dns=192.168.1.1 - -LABEL Boot_from_hardrive - localboot 0xffff - -MENU ROWS 6 - diff --git a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg Binary files differdeleted file mode 100644 index d9f3ebb..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/cd-root/isolinux/vbg.jpg +++ /dev/null diff --git a/build_tools/clarch/larch/profiles/MV-local/locale.gen b/build_tools/clarch/larch/profiles/MV-local/locale.gen deleted file mode 100644 index a3276b1..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/locale.gen +++ /dev/null @@ -1,8 +0,0 @@ -# locales for larch (/etc/locale.gen) - -en_US ISO-8859-1 -en_US.UTF-8 UTF-8 -de_DE ISO-8859-1 -de_DE@euro ISO-8859-15 -de_DE.UTF-8 UTF-8 - diff --git a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf b/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf deleted file mode 100644 index f26fdb1..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/mkinitcpio.conf +++ /dev/null @@ -1,54 +0,0 @@ -# vim:set ft=sh -# MODULES -# The following modules are loaded before any boot hooks are -# run. Advanced users may wish to specify all system modules -# in this array. For instance: -# MODULES="piix ide_disk reiserfs" -MODULES="" - -# BINARIES -# This setting includes, into the CPIO image, and additional -# binaries a given user may wish. This is run first, so may -# be used to override the actual binaries used in a given hook. -# (Existing files are NOT overwritten is already added) -# BINARIES are dependancy parsed, so you may safely ignore libraries -#BINARIES="" - -# FILES -# This setting is similar to BINARIES above, however, files are added -# as-is and are not parsed in anyway. This is useful for config files. -# Some users may wish to include modprobe.conf for custom module options, -# like so: -# FILES="/etc/modprobe.conf" -FILES="" - -# HOOKS -# This is the most important setting in this file. The HOOKS control the -# modules and scripts added to the image, and what happens at boot time. -# Order is important, and it is recommended that you do not change the -# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for -# help on a given hook. -# 'base' is _required_ unless you know precisely what you are doing. -# 'udev' is _required_ in order to automatically load modules -# 'modload' may be used in place of 'udev', but is not recommended -# 'filesystems' is _required_ unless you specify your fs modules in MODULES -# Examples: -# This setup specifies all modules in the MODULES setting above. -# No raid, lvm, or encrypted root is needed. -# HOOKS="base" -# -# This setup will autodetect all modules for your system and should -# work as a sane default -# HOOKS="base udev autodetect ide scsi sata filesystems" -# -# This setup will generate a 'full' image which supports most systems. -# No autodetection is done. -# HOOKS="base udev ide scsi sata usb filesystems" -# -# This setup assembles an ide raid array with an encrypted root FS. -# Note: See 'mkinitcpio -H raid' for more information on raid devices. -# HOOKS="base udev ide filesystems raid encrypt" -# -# This setup loads an LVM volume group on a usb device. -# HOOKS="base udev usb filesystems lvm" -HOOKS="base udev ide scsi sata usb larch1 larch2___aufs___ larch3" diff --git a/build_tools/clarch/larch/profiles/MV-local/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/pacman.conf deleted file mode 100755 index 3739bbc..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/pacman.conf +++ /dev/null @@ -1,66 +0,0 @@ -# -# /etc/pacman.conf -# from pacman.conf MV -# NOTE: If you find a mirror that is geographically close to you, please -# move it to the top of the server list, so pacman will choose it -# first. -# -# To re-sort your mirror lists by ping/traceroute results, use the -# /usr/bin/sortmirrors script. It requires the "netselect" package. -# - -# See the pacman manpage for option directives - -# -# GENERAL OPTIONS -# -[options] -LogFile = /var/log/pacman.log -NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers -NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf -NoUpgrade = etc/rc.conf etc/rc.local -NoUpgrade = etc/modprobe.conf etc/modules.conf -NoUpgrade = etc/lilo.conf boot/grub/menu.lst -NoUpgrade = data/srv/hobbit/etc/bb-hosts -NoUpgrade = etc/func/minion.conf - -HoldPkg = pacman glibc -CacheDir = /data/var/cache/pacman/pkg -#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u - -# -# REPOSITORIES -# - can be defined here or included from another file -# - pacman will search repositories in the order defined here. -# - local/custom mirrors can be added here or in separate files -# -[mv-core] -Server = http://localmirror/repo/i686/mv-core - -[core-testing] -#Server = file:///data/local/pkg_repo/i686/core-testing -Server = http://localmirror/repo/i686/core-testing - -[extra-testing] -#Server = file:///data/local/pkg_repo/i686/core-testing -Server = http://localmirror/repo/i686/extra-testing - - -########################ARCH DEFAULTS############# -#[core] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[extra] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[community] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -# Unstable is disabled by default. To enable, uncomment the following -# two lines. You can add preferred servers immediately after the header, -# and they will be used before the default mirrors. -#[unstable] -#Include = /etc/pacman.d/mirrorlist diff --git a/build_tools/clarch/larch/profiles/MV-local/pkglist b/build_tools/clarch/larch/profiles/MV-local/pkglist deleted file mode 100644 index 91351bc..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/pkglist +++ /dev/null @@ -1,366 +0,0 @@ -Midnight-blue 1-22 -Midnight-wide 1-22 -STB-mythmenu 1.0-38 -STB-system 3.0-159 -acl 2.2.47-1 -acpid 1.0.6-3 -alsa-lib 1.0.16-1 -atk 1.22.0-1 -attr 2.4.41-1 -audiofile 0.2.6-3 -avahi 0.6.22-1 -bash 3.2.033-2 -basic-amber 1-5 -basic-blue 1-6 -basic-green 1-5 -basic-purple 1-5 -basic-red 1-5 -bc 1.06-4 -bigreqsproto 1.0.2-1 -binutils 2.18-8 -bzip2 1.0.5-2 -ca-certificates 20080514-3 -cairo 1.6.4-1 -compositeproto 0.4-1 -confuse 2.5-1 -coreutils 6.12-1 -cpio 2.9-3 -cracklib 2.8.10-5 -cryptsetup 1.0.6-1 -curl 7.18.2-1 -damageproto 1.1.0-1 -dash 0.5.4-4 -db 4.6.21-2 -dbus 1.2.1-1 -dbus-glib 0.76-1 -dcron 3.2-3 -ddcxinfo-arch 0.8-1 -device-mapper 1.02.24-1 -dhcpcd 3.2.1-1 -dialog 1.1_20080316-3 -diffutils 2.8.1-5 -dmapi 2.2.8-3 -dmidecode 2.9-2 -dmxproto 2.2.2-1 -dnsutils 9.4.2-1 -e16-myth-settings 1.0-38 -e2fsprogs 1.40.8-1 -ed 0.9-1 -eject 2.1.5-3 -enlightenment 0.16.8.9-2 -esd 0.2.38-3 -etcnet 0.7.15-19 -ethtool 6-1 -evilwm 1.0.0-1.1 -exo 0.3.4-1 -expat 2.0.1-1 -expect 5.44.1.4-1 -file 4.24-1 -filesystem 2008.06-2 -findutils 4.4.0-1 -fixesproto 4.0-2 -flac 1.2.1-1 -fontcacheproto 0.1.2-1 -fontconfig 2.5.0-1 -fontsproto 2.0.2-1 -freetype2 2.3.6-1 -func 0.13-15 -gawk 3.1.6-2 -gcc 4.3.1-1 -gcc-libs 4.3.1-1 -gdb 6.8-1 -gdbm 1.8.3-5 -gdk-pixbuf 0.22.0-4 -gen-init-cpio 2.6.17-3 -gettext 0.17-1 -ghosd 0.0.1-18 -glib 1.2.10-7 -glib2 2.16.4-1 -glibc 2.8-2 -glproto 1.4.9-1 -gmp 4.2.2-2 -grep 2.5.3-3 -groff 1.19.2-4 -grub 0.97-12 -gtk 1.2.10-8 -gtk2 2.12.10-1 -guile 1.8.4-2 -gzip 1.3.12-4 -hal 0.5.11-1 -hal-info 0.20080508-1 -hd3000firmware 0.1-1 -hdhgrab 1-1 -hdhomerun 20070726-1 -hdparm 8.6-1 -heimdal 1.0.1-2 -hwd 5.3.4-1 -hwdetect 0.9-1 -iguanaIR 0.95-3 -imlib2 1.4.1-1 -initscripts 2008.05-1 -inputproto 1.4.3-1 -intel-dri 7.0.3-1 -intel-e1000 7.6.15.4-2 -iproute 2.6.24_rc7-1 -iptables 1.4.0-2 -iputils 20070202-4 -ivtv-utils 1.0.3-1 -jfsutils 1.1.12-2 -kbd 1.14.1.20080309-2 -kbproto 1.0.3-1 -kernel-headers 2.6.25.6-1 -kernel26STB 2.6.24-39 -keylaunch 1.3.3-10 -klibc 1.5-5 -klibc-extras 2.4-1 -klibc-kbd 1.15.20080312-5 -klibc-module-init-tools 3.2.2-3 -klibc-udev 116-3 -lame 3.98-1 -lcdproc 20080326-7 -less 418-1 -libarchive 2.5.5-1 -libavc1394 0.5.3-1 -libcap 1.10-2 -libdaemon 0.12-1 -libdatrie 0.1.2-1 -libdc1394 2.0.1-1 -libdmx 1.0.2-1 -libdownload 1.3-1 -libdrm 2.3.0-1 -libfontenc 1.0.4-1 -libgcrypt 1.4.1-1 -libglade 2.6.2-1 -libgpg-error 1.6-1 -libice 1.0.4-1 -libid3tag 0.15.1b-2 -libiec61883 1.1.0-1 -libjpeg 6b-4 -liblbxutil 1.0.1-1 -libldap 2.3.40-1 -libmng 1.0.10-1 -libmpeg2 0.4.1-1 -libmysqlclient 5.0.60-1 -libogg 1.1.3-1 -libpcap 0.9.8-2 -libpng 1.2.29-1 -libraw1394 1.3.0-1 -libsasl 2.1.22-5 -libsm 1.0.3-1 -libsmbios 2.0.2-1 -libstatgrab 0.14-1 -libthai 0.1.9-1 -libtheora 1.0beta1-1 -libtiff 3.8.2-3 -libtool 2.2.4-1 -libungif 4.1.4-1 -libusb 0.1.12-3 -libvorbis 1.2.0-1 -libx11 1.1.4-2 -libx86 0.99-1 -libxau 1.0.3-1 -libxaw 1.0.4-1 -libxcb 1.1-1 -libxcomposite 0.4.0-1 -libxcursor 1.1.9-1 -libxdamage 1.1.1-1 -libxdmcp 1.0.2-1 -libxext 1.0.4-1 -libxfce4util 4.4.2-1 -libxfixes 4.0.3-1 -libxfont 1.3.2-1 -libxfontcache 1.0.4-1 -libxft 2.1.12-1 -libxi 1.1.3-1 -libxinerama 1.0.3-1 -libxkbfile 1.0.5-1 -libxkbui 1.0.2-1 -libxml2 2.6.32-1 -libxmu 1.0.4-1 -libxp 1.0.0-1 -libxpm 3.5.7-1 -libxrandr 1.2.2-1 -libxrender 0.9.4-1 -libxt 1.0.5-1 -libxtrap 1.0.0-1 -libxtst 1.0.3-1 -libxv 1.0.4-1 -libxvmc 1.0.4-1 -libxxf86dga 1.0.2-1 -libxxf86misc 1.0.1-1 -libxxf86vm 1.0.1-1 -licenses 2.4-1 -lirc 0.8.3-17 -lirc-utils 0.8.3-13 -live-installer 3.2-52 -lm_sensors 3.0.2-1 -logrotate 3.7.5-1 -lvm2 2.02.36-1 -lzo2 2.02-3 -mailx 8.1.1-5 -man 1.6f-2 -man-pages 3.00-1 -mcpp 2.6.4-2 -mdadm 2.6.4-1 -mediadirsetup 1-14 -mesa 7.0.3-3 -mkinitcpio 0.5.19-1 -mlocate 0.20-2 -module-init-tools 3.2.2-6 -mpfr 2.3.1-1 -mysql 5.0.60-200 -mysql-clients 5.0.60-1 -mysql-python 1.2.2-1 -mythtv-release-fixes 17773-8 -mythtv-themes-release-fixes 15931-4 -nano 2.0.7-1 -ncid 0.71-1 -ncurses 5.6-6 -net-tools 1.60-13 -netkit-telnet 0.17-7 -nfs-utils 1.1.0-2 -nfsidmap 0.20-2 -nmbscan 1.2.5-1 -ntp 4.2.4p4-1 -nvidia-STB 173.08-5 -nvidia-utils 173.08-4 -openssh 5.0p1-1 -openssl 0.9.8h-3 -opera 9.51-1 -oss 4.0_1016-11 -pacman 3.2.0-2008 -pam 1.0.1-1 -pango 1.18.4-3 -patch 2.5.9-1 -pciutils 2.2.8-3 -pcmciautils 014-4 -pcre 7.7-1 -perl 5.10.0-3 -perl-date-manip 5.44-1 -perl-dbd-mysql 3.0008-11000 -perl-dbi 1.601-1 -perl-uri 1.35-3 -perl-xml-parser 2.34-2 -pixman 0.10.0-1 -pm-utils 1.1.2.2-1 -popt 1.10.6-3 -portmap 6.0-2 -ppp 2.4.4-6 -printproto 1.0.4-1 -procinfo 19-2 -procps 3.2.7-1000 -psmisc 22.6-1 -pyopenssl 0.6-3 -python 2.5.2-2 -python-iplib 1.0-1 -qt3 3.3.8-7 -randrproto 1.2.1-1 -readline 5.2-7 -recordproto 1.13.2-1 -reiserfsprogs 3.6.20-3 -renderproto 0.9.3-1 -rp-pppoe 3.8-3 -run-parts 2.28.6-2 -runit 1.8.0-32 -sdl 1.2.13-1 -sdparm 1.02-2 -sed 4.1.5-3 -setserial 2.17-2 -shadow 4.0.18.2-2 -smbclient 3.0.30-1 -sudo 1.6.9p17-1 -swig 1.3.31-1 -sysfsutils 2.1.0-4 -syslog-ng 2.0.9-4 -sysvinit 2.86-4 -syth-lacquer-wide 4-1 -tar 1.20-2 -tcl 8.5.3-1 -tcp_wrappers 7.6-8 -terminal 0.2.8-2 -tilda 0.9.6-8 -trapproto 3.4.3-1 -ttf-bitstream-vera 1.10-5 -tzdata 2008c-1 -udev 119-1 -unclutter 8-1 -unichrome-dri 7.0.3-1 -usbutils 0.73-5 -util-linux-ng 2.13.0.1-2 -vbetool 1.0-2 -vi 7.1.330-1 -videoproto 2.2.2-1 -vmwaretools 6.0.0-6 -vte 0.16.14-1 -wavpack 4.50.0-1 -wget 1.11.3-1 -which 2.19-2 -wireless_tools 29-2 -wol 0.7.1-2 -wpa_supplicant 0.5.10-1 -xbitmaps 1.0.1-1 -xcb-proto 1.1-1 -xcursor-themes 1.0.1-1 -xextproto 7.0.3-1 -xf86-input-evdev 2.0.1-1 -xf86-input-joystick 1.3.1-1 -xf86-input-keyboard 1.3.1-1 -xf86-input-mouse 1.2.3-1 -xf86-video-apm 1.2.0-1 -xf86-video-ark 0.7.0-1 -xf86-video-ati 6.8.0-4 -xf86-video-chips 1.2.0-1 -xf86-video-cirrus 1.2.1-1 -xf86-video-dummy 0.2.0-4 -xf86-video-fbdev 0.3.1-4 -xf86-video-glint 1.1.1-5 -xf86-video-i128 1.2.1-4 -xf86-video-i740 1.1.0-4 -xf86-video-imstt 1.1.0-4 -xf86-video-intel 2.3.2-1 -xf86-video-mga 1.4.8-3 -xf86-video-neomagic 1.2.1-1 -xf86-video-nv 2.1.9-1 -xf86-video-rendition 4.1.3-4 -xf86-video-s3 0.5.0-4 -xf86-video-s3virge 1.10.1-1 -xf86-video-savage 2.2.1-1 -xf86-video-siliconmotion 1.5.1-4 -xf86-video-sis 0.9.4-3 -xf86-video-sisusb 0.8.1-4 -xf86-video-tdfx 1.4.0-1 -xf86-video-trident 1.3.0-2 -xf86-video-tseng 1.1.1-4 -xf86-video-v4l 0.1.1-4 -xf86-video-vesa 1.3.0-5 -xf86-video-vga 4.1.0-4 -xf86-video-via 0.2.2-5 -xf86-video-vmware 10.16.2-1 -xf86-video-voodoo 1.1.1-4 -xf86dgaproto 2.0.3-1 -xf86miscproto 0.9.2-1 -xf86vidmodeproto 2.2.2-1 -xfsprogs 2.9.7-1 -xine-lib 1.1.12-1 -xineramaproto 1.1.2-1 -xkeyboard-config 1.2-1 -xorg-apps 1.0.3-3 -xorg-font-utils 1.0.3-3 -xorg-fonts-100dpi 1.0.1-1 -xorg-fonts-75dpi 1.0.1-2 -xorg-fonts-alias 1.0.1-1 -xorg-fonts-encodings 1.0.2-2 -xorg-fonts-misc 1.0.0-3 -xorg-res-utils 1.0.3-2 -xorg-server 1.4.2-10 -xorg-server-utils 7.3-1 -xorg-twm 1.0.1-2 -xorg-utils 7.3-1 -xorg-xauth 1.0.2-1 -xorg-xinit 1.1.0-1 -xorg-xkb-utils 1.0.2-2 -xosd 2.2.14-1 -xproto 7.0.13-1 -xterm 235-1 -xtrans 1.2-1 -zlib 1.2.3-4 diff --git a/build_tools/clarch/larch/profiles/MV-local/post-process.sh b/build_tools/clarch/larch/profiles/MV-local/post-process.sh deleted file mode 100755 index 131b907..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post-process.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/bash -echo $@ -INSTDIR=$1 -PROFILE=$2 - -#everything below this point is specific to MythVantage -cp -rp $PROFILE/post_process $INSTDIR/.tweak -chroot $INSTDIR .tweak/tweak.sh -rm -rf $INSTDIR/.tweak - -#find the size of the install. -#This is used to calculate progress on the install -tsize=`du -sm $INSTDIR/ | cut -f1` -echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size -upsize=`du -sm --exclude data $INSTDIR/ |cut -f1` -echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab b/build_tools/clarch/larch/profiles/MV-local/post_process/fstab deleted file mode 100755 index 8ea8305..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/fstab +++ /dev/null @@ -1,14 +0,0 @@ -# -# /etc/fstab: static file system information -# -# <file system> <dir> <type> <options> <dump> <pass> -none /dev/pts devpts defaults 0 0 -none /dev/shm tmpfs defaults 0 0 - -/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0 -/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0 -/dev/fd0 /mnt/fl vfat user,noauto 0 0 - -/dev/hda1 / reiserfs defaults 0 1 -/dev/hda2 swap swap defaults 0 0 -/dev/hda3 /data reiserfs defaults 0 0 diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch deleted file mode 100644 index eb9034c..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/functions.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- functions.orig 2008-07-06 10:16:37.000000000 -0500 -+++ functions 2008-07-06 19:42:07.000000000 -0500 -@@ -61,8 +61,8 @@ - - # prefixes: - --PREFIX_REG="::" --PREFIX_HL=" >" -+PREFIX_REG=" :" -+PREFIX_HL=" :" - - # functions: - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow deleted file mode 100644 index ca19dbb..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.allow +++ /dev/null @@ -1,7 +0,0 @@ -# -# /etc/hosts.allow -# -ALL: 192.168. -ALL: 10. -ALL: 127.0.0.1 -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny deleted file mode 100755 index ca30ab4..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/hosts.deny +++ /dev/null @@ -1,6 +0,0 @@ -# -# /etc/hosts.deny -# -ALL - -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst deleted file mode 100755 index 1bd45a6..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/menu.lst +++ /dev/null @@ -1,55 +0,0 @@ -# Config file for GRUB - The GNU GRand Unified Bootloader -# /boot/grub/menu.lst - -# DEVICE NAME CONVERSIONS -# -# Linux Grub -# ------------------------- -# /dev/fd0 (fd0) -# /dev/hda (hd0) -# /dev/hdb2 (hd1,1) -# /dev/hda3 (hd0,2) -# - -# FRAMEBUFFER RESOLUTION SETTINGS -# +-------------------------------------------------+ -# | 640x480 800x600 1024x768 1280x1024 -# ----+-------------------------------------------- -# 256 | 0x301=769 0x303=771 0x305=773 0x307=775 -# 32K | 0x310=784 0x313=787 0x316=790 0x319=793 -# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794 -# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795 -# +-------------------------------------------------+ - -# general configuration: -timeout 5 -default 0 -#color light-blue/black light-cyan/blue - -# boot sections follow -# each is implicitly numbered from 0 in the order of appearance below -# -# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line. -# -#-* -hiddenmenu - -# (0) normal -title MythVantage -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1 -initrd /boot/kernel26.img - -# (1) bootsplash -title STB-bootsplash -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 -initrd /boot/kernel26.img - -# (2) noautologin -title STB-nologin -root (hd0,0) -kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin -initrd /boot/kernel26.img - - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf deleted file mode 100755 index e4495ed..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/pacman.conf +++ /dev/null @@ -1,64 +0,0 @@ -# -# /etc/pacman.conf -# -# NOTE: If you find a mirror that is geographically close to you, please -# move it to the top of the server list, so pacman will choose it -# first. -# -# To re-sort your mirror lists by ping/traceroute results, use the -# /usr/bin/sortmirrors script. It requires the "netselect" package. -# - -# See the pacman manpage for option directives - -# -# GENERAL OPTIONS -# -[options] -LogFile = /var/log/pacman.log -NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers -NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf -NoUpgrade = etc/rc.conf etc/rc.local -NoUpgrade = etc/modprobe.conf etc/modules.conf -NoUpgrade = etc/lilo.conf boot/grub/menu.lst -NoUpgrade = data/srv/hobbit/etc/bb-hosts -NoUpgrade = etc/func/minion.conf - -HoldPkg = pacman glibc -CacheDir = /data/var/cache/pacman/pkg -#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u - -# -# REPOSITORIES -# - can be defined here or included from another file -# - pacman will search repositories in the order defined here. -# - local/custom mirrors can be added here or in separate files -# -[mv-core-testing] -Server = http://mvbuild/repo/mv-core-testing/ - -[mv-extra-testing] -Server = http://mvbuild/repo/mv-extra-testing/ - -[svc_pkg] -Include = /etc/pacman.d/svc_pkg - - -########################ARCH DEFAULTS############# -#[core] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[extra] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -#[community] -# Add your preferred servers here, they will be used first -#Include = /etc/pacman.d/mirrorlist - -# Unstable is disabled by default. To enable, uncomment the following -# two lines. You can add preferred servers immediately after the header, -# and they will be used before the default mirrors. -#[unstable] -#Include = /etc/pacman.d/mirrorlist diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf deleted file mode 100755 index 03d8e5c..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.conf +++ /dev/null @@ -1,113 +0,0 @@ -# -# /etc/rc.conf - Main Configuration for Arch Linux -# - -# -# ----------------------------------------------------------------------- -# LOCALIZATION -# ----------------------------------------------------------------------- -# -# LOCALE: available languages can be listed with the 'locale -a' command -# HARDWARECLOCK: set to "UTC" or "localtime" -# TIMEZONE: timezones are found in /usr/share/zoneinfo -# KEYMAP: keymaps are found in /usr/share/kbd/keymaps -# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US) -# CONSOLEMAP: found in /usr/share/kbd/consoletrans -# USECOLOR: use ANSI color sequences in startup messages -# -LOCALE="en_US.utf8" -HARDWARECLOCK="UTC" -TIMEZONE="US/Central" -KEYMAP="us" -CONSOLEFONT= -CONSOLEMAP= -USECOLOR="no" - -# -# ----------------------------------------------------------------------- -# HARDWARE -# ----------------------------------------------------------------------- -# -# Scan hardware and load required modules at bootup -MOD_AUTOLOAD="yes" -if [ -f /etc/systemconfig ] -then - . /etc/systemconfig -fi - -if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ] -then - ALSABLACKLIST="soundcore" -else - if [ x$Audiotype = x ] - then - ALSABLACKLIST="soundcore" - else - ALSABLACKLIST="" - fi -fi - -# Module Blacklist - modules in this list will never be loaded by udev -MOD_BLACKLIST=($ALSABLACKLIST) -# -# Modules to load at boot-up (in this order) -# - prefix a module with a ! to blacklist it -# -MODULES=() -# Scan for LVM volume groups at startup, required if you use LVM -USELVM="no" - -# -# ----------------------------------------------------------------------- -# NETWORKING -# ----------------------------------------------------------------------- -# -HOSTNAME=`cat /etc/hostname` - -#The following is only used on the install. After the first boot everything is set from /etc/net. - - -# -# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available -# interfaces. -# -# Interfaces to start at boot-up (in this order) -# Declare each interface then list in INTERFACES -# - prefix an entry in INTERFACES with a ! to disable it -# - no hyphens in your interface names - Bash doesn't like it -# -# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp") -# -lo="lo 127.0.0.1" -#eth0="dhcp" -INTERFACES=(lo ) -# -# Routes to start at boot-up (in this order) -# Declare each route then list in ROUTES -# - prefix an entry in ROUTES with a ! to disable it -# -gateway="default gw 192.168.0.1" -ROUTES=(!gateway) -# -# Enable these network profiles at boot-up. These are only useful -# if you happen to need multiple network configurations (ie, laptop users) -# - set to 'menu' to present a menu during boot-up (dialog package required) -# - prefix an entry with a ! to disable it -# -# Network profiles are found in /etc/network-profiles -# -#NET_PROFILES=(main) - -# -# ----------------------------------------------------------------------- -# DAEMONS -# ----------------------------------------------------------------------- -# -# Daemons to start at boot-up (in this order) -# - prefix a daemon with a ! to disable it -# - prefix a daemon with a @ to start it up in the background -# -#DAEMONS=(syslog-ng network netfs crond) -DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus hal avahi-daemon) - -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local deleted file mode 100755 index 0552860..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.local +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/bash -. /etc/profile -. ${MV_ROOT}/bin/install_functions.sh -#install initial database -pacman -S --noconfirm /data/var/cache/pacman/pkg/mythdb-initial* 2>/dev/null - -init_network -/etc/rc.d/alsa-utils start 0 -init_remote -random_theme - -echo $CMDLINE | grep -q NoX -if [ $? = 0 ] -then - echo "No auto X option found" - /usr/bin/chvt 2 -else - /root/startx & -fi - - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown deleted file mode 100755 index 1a8cdbe..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.shutdown +++ /dev/null @@ -1,104 +0,0 @@ -#!/bin/bash -# -# /etc/rc.shutdown -# - -. /etc/rc.conf -. /etc/rc.d/functions - -# avoid staircase effect -/bin/stty onlcr - -echo " " -printhl "Initiating Shutdown..." -echo " " - -if [ -x /etc/rc.local.shutdown ]; then - /etc/rc.local.shutdown -fi - -if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then - # Shutdown daemons - let i=${#DAEMONS[@]} - while [[ i -ge 0 ]]; do - if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then - /etc/rc.d/${DAEMONS[$i]#@} stop - fi - let i=i-1 - done - # find any leftover daemons and shut them down - if [ -d /var/run/daemons ]; then - for daemon in `ls /var/run/daemons`; do - /etc/rc.d/$daemon stop - done - fi -fi - -# Terminate all processes -stat_busy "Sending SIGTERM To Processes" -/sbin/killall5 -15 &> /dev/null -/bin/sleep 5 -stat_done - -stat_busy "Sending SIGKILL To Processes" -/sbin/killall5 -9 &> /dev/null -/bin/sleep 1 -stat_done - -stat_busy "Saving Random Seed" -/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null -stat_done - -stat_busy "Saving System Clock" -if [ "$HARDWARECLOCK" = "UTC" ]; then - /sbin/hwclock --directisa --utc --systohc -else - /sbin/hwclock --directisa --localtime --systohc -fi -stat_done - -# removing psmouse module to fix some reboot issues on newer laptops -modprobe -r psmouse >/dev/null 2>&1 - -# Write to wtmp file before unmounting -/sbin/halt -w - -stat_busy "Deactivating Swap" -/sbin/swapoff -a -stat_done - -stat_busy "Unmounting Filesystems" -/bin/umount -a -stat_done - -if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then - if [ -d /etc/lvm -a -x /sbin/lvm ]; then - /bin/mount -n -t sysfs none /sys 2>/dev/null - if [ -d /sys/block ]; then - stat_busy "Deactivating LVM2 groups" - /sbin/lvm vgchange --ignorelockingfailure -a n - stat_done - umount /sys - fi - fi -fi - -stat_busy "Remounting Root Filesystem Read-only" -/bin/mount -n -o remount,ro / -stat_done -exit 0 -# Power off or reboot -if [ "$RUNLEVEL" = "0" ]; then - printsep - printhl "${C_H2}POWER OFF" - /sbin/poweroff -d -f -h -i -else - printsep - printhl "${C_H2}REBOOTING" - # adding kexec support - [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1 - /sbin/reboot -d -f -i -fi - -# End of file -# vim: set ts=2 noet: diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch b/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch deleted file mode 100644 index 7648f7f..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/rc.sysinit.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- rc.sysinit.orig 2009-02-22 22:45:07.000000000 +0000 -+++ rc.sysinit 2009-02-22 22:45:46.000000000 +0000 -@@ -7,9 +7,8 @@ - . /etc/rc.d/functions - - echo " " --printhl "LinHES" --printhl "The Linux Home Entertainment System" --printhl "${C_H2}http://www.linhes.org" -+printhl "MythVantage" -+printhl "http://www.MythVantage.com" - printhl "Distributed under the GNU General Public License (GPL)" - printsep - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/root b/build_tools/clarch/larch/profiles/MV-local/post_process/root deleted file mode 100644 index e6542a2..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/root +++ /dev/null @@ -1,13 +0,0 @@ -# -# DO NOT EDIT THIS FILE MANUALLY!! USE crontab -e INSTEAD. -# - -# <minute> <hour> <day> <month> <dow> <command> - - -01 * * * * /usr/sbin/run-cron /etc/cron.hourly -*/10 * * * * /usr/sbin/run-cron /etc/cron.tenminutes -02 00 * * * /usr/sbin/run-cron /etc/cron.daily -22 00 * * 0 /usr/sbin/run-cron /etc/cron.weekly -42 00 1 * * /usr/sbin/run-cron /etc/cron.monthly - diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty b/build_tools/clarch/larch/profiles/MV-local/post_process/securetty deleted file mode 100755 index 68e8a50..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/securetty +++ /dev/null @@ -1,19 +0,0 @@ -# -# /etc/securetty -# - -console -vc/1 -vc/2 -vc/3 -vc/4 -vc/5 -vc/6 -tty1 -tty2 -tty3 -tty4 -tty5 -tty6 - -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh b/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh deleted file mode 100755 index 9fa0396..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/post_process/tweak.sh +++ /dev/null @@ -1,67 +0,0 @@ -#!/bin/bash - -cd / -#tar -zxvf .tweak/linux-kernel-2.6.16-i486-1.tgz -#chmod 755 install/doinst.sh -#install/doinst.sh -cd .tweak -#cd /boot -#ln -s vmlinuz26STB vmlinuz -#cd - -#cp fstab /etc/fstab.install -#cp pacman.conf /etc -cp menu.lst /boot/grub/menu.lst - -cp -f hosts.allow /etc/hosts.allow -cp -f securetty /etc/securetty -cp -f rc.conf /etc/rc.conf -#cp -f rc.local /etc/rc.local -#cp -f locale.gen /etc/locale.gen - -cp -f rc.shutdown /etc/rc.shutdown -#cp -f inittab /etc/inittab - -#cp -f fbsplash-darch-1024x768 /boot/fbsplash-darch-1024x768 - - - -#cp -rf .tilda /data/home/mythtv/.tilda -ln -s /etc/keylaunchrc /root/.keylaunchrc -mkdir -p /etc/cron.tenminutes -cp -f root /var/spool/cron/root -chmod 0440 /etc/sudoers -#echo "mvi" > /etc/hostname -#echo /usr/local/lib >> /etc/ld.so.conf -#/sbin/ldconfig -#/usr/sbin/locale-gen - -chmod 777 /tmp -mkdir -p /data/home/mythtv/.mythtv -ln -s /etc/lircrc /data/home/mythtv/.mythtv/lircrc -ln -s /etc/lircrc /data/home/mythtv/.lircrc -cp -f /etc/skel/.bashrc /data/home/mythtv/ -cp -f /etc/skel/.bash_profile /data/home/mythtv/ -cp -f /etc/skel/.bashrc /root/ -cp -f /etc/skel/.bash_profile /root/ -mkdir -p /data/home/mythtv/templates -chown -R mythtv /data/media -chown -R mythtv /data/home/mythtv -ln -s /usr/sbin/chroot /usr/bin/chroot -ln -s /bin/lsmod /sbin/lsmod -/sbin/add_service.sh netfs -/sbin/add_service.sh oss -/sbin/add_service.sh syslog-ng -/sbin/remove_service.sh alsa-utils -/usr/bin/chage -d 01-01-2000 nobody -/usr/bin/chage -E 01-01-3000 nobody -cp /etc/pam.d/chage /etc/pam.d/chsh -chsh -s /bin/bash nobody - - -cd /etc/rc.d -echo "patching functions" -patch -p0 </.tweak/functions.patch -cd /etc -echo "patching rc.sysinit" -patch -p0 </.tweak/rc.sysinit.patch -ln -s /bin/bash /bin/ash diff --git a/build_tools/clarch/larch/profiles/MV-local/rcconfx b/build_tools/clarch/larch/profiles/MV-local/rcconfx deleted file mode 100644 index 80e7dfa..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rcconfx +++ /dev/null @@ -1,16 +0,0 @@ -# -# patch file for /etc/rc.conf -# -LOCALE="en_US.utf8" -HARDWARECLOCK="UTC" -TIMEZONE="UTC" -ddKEYMAP="de-latin1-nodeadkeys" -MODULES=() - -HOSTNAME="mvi" - -USELVM="no" - -#eth0="dhcp" - -#DAEMONS=(syslog-ng mysqld) diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd deleted file mode 100644 index ab53c30..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/conf.d/dhcpcd +++ /dev/null @@ -1,6 +0,0 @@ -# -# Arguments to be passed to the DHCP client daemon -# - -DHCPCD_ARGS="-t 10 -h $HOSTNAME" - diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow deleted file mode 100644 index ca19dbb..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/hosts.allow +++ /dev/null @@ -1,7 +0,0 @@ -# -# /etc/hosts.allow -# -ALL: 192.168. -ALL: 10. -ALL: 127.0.0.1 -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab deleted file mode 100644 index b8b2b3a..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/inittab +++ /dev/null @@ -1,42 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:3:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/loginroot -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown deleted file mode 100644 index d614d4b..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/larch-shutdown +++ /dev/null @@ -1,47 +0,0 @@ -# Functions used by rc.shutdown -# Modified versions for larch live systems - -f_saveclock () -{ - : -} - -f_swapoff () -{ - ############################# Include session saving functions - # . /opt/larch-live/session-save/shutdown2 - # if [ -f /tmp/checkse ]; then - # . /tmp/checkse - #else - # checkse - # fi - - if [ -n "${saving}" ] && ! session_save; then - echo - echo "If you know what you are doing, you may be able to recover" - echo "something from this unpleasant situation." - echo - echo "You may use the command line to investigate further ..." - echo - echo "When finished please enter 'exit', the shutdown process will" - echo "then continue." - sh -i - fi - - ############################# - - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - if [ -n "${ejectdev}" ]; then - echo "Ejecting live CD" - eject ${ejectdev} - echo "sleeping for 6 seconds" - sleep 6 - - fi -} diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options deleted file mode 100644 index 237c390..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/ppp/options +++ /dev/null @@ -1,352 +0,0 @@ -# /etc/ppp/options -# -# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> -# Modified for Debian by alvar Bray <alvar@meiko.co.uk> -# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> -# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> -# -# To quickly see what options are active in this file, use this command: -# egrep -v '#|^ *$' /etc/ppp/options - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -# ms-dns 192.168.1.1 -# ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -# ms-wins 192.168.1.50 -# ms-wins 192.168.1.51 - -# Run the executable or shell command specified after pppd has -# terminated the link. This script could, for example, issue commands -# to the modem to cause it to hang up if hardware modem control signals -# were not available. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -asyncmap 0 - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -#auth - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Use software flow control (i.e. XON/XOFF) to control the flow of data -# on the serial port. -#xonxoff - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Don't use the modem control lines. -#local - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Don't show the passwords when logging the contents of PAP packets. -# This is the default. -hide-password - -# When logging the contents of PAP packets, this option causes pppd to -# show the password string in the log message. -#show-password - -# Use the modem control lines. On Ultrix, this option implies hardware -# flow control, as for the crtscts option. (This option is not fully -# implemented.) -modem - -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd -# will ask the peer to send packets of no more than <n> bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Disables the default behaviour when no local IP address is specified, -# which is to determine (if possible) the local IP address from the -# hostname. With this option, the peer will have to supply the local IP -# address during IPCP negotiation (unless it specified explicitly on the -# command line or in an options file). -#noipdefault - -# Enables the "passive" option in the LCP. With this option, pppd will -# attempt to initiate a connection; if no reply is received from the -# peer, pppd will then just wait passively for a valid LCP packet from -# the peer (instead of exiting, as it does without this option). -#passive - -# With this option, pppd will not transmit LCP packets to initiate a -# connection until a valid LCP packet is received from the peer (as for -# the "passive" option with old versions of pppd). -#silent - -# Don't request or allow negotiation of any options for LCP and IPCP -# (use default values). -#-all - -# Disable Address/Control compression negotiation (use default, i.e. -# address/control field disabled). -#-ac - -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape -# all control characters). -#-am - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -#-detach - -# Disable IP address negotiation (with this option, the remote IP -# address must be specified with an option on the command line or in -# an options file). -#-ip - -# Disable IPCP negotiation and IP communication. This option should -# only be required if the peer is buggy and gets confused by requests -# from pppd for IPCP negotiation. -#noip - -# Disable magic number negotiation. With this option, pppd cannot -# detect a looped-back line. -#-mn - -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. -# 1500). -#-mru - -# Disable protocol field compression negotiation (use default, i.e. -# protocol field compression disabled). -#-pc - -# Require the peer to authenticate itself using PAP. -#+pap - -# Don't agree to authenticate using PAP. -#-pap - -# Require the peer to authenticate itself using CHAP [Cryptographic -# Handshake Authentication Protocol] authentication. -#+chap - -# Don't agree to authenticate using CHAP. -#-chap - -# Disable negotiation of Van Jacobson style IP header compression (use -# default, i.e. no compression). -#-vj - -# Increase debugging level (same as -d). If this option is given, pppd -# will log the contents of all control packets sent or received in a -# readable form. The packets are logged through syslog with facility -# daemon and level debug. This information can be directed to a file by -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If -# pppd is compiled with extra debugging enabled, it will log messages -# using facility local2 instead of daemon). -#debug - -# Append the domain name <d> to the local host name for authentication -# purposes. For example, if gethostname() returns the name porsche, -# but the fully qualified domain name is porsche.Quotron.COM, you would -# use the domain option to set the domain name to Quotron.COM. -#domain <d> - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu <n> - -# Set the name of the local system for authentication purposes to <n>. -# This is a privileged option. With this option, pppd will use lines in the -# secrets files which have <n> as the second field when looking for a -# secret to use in authenticating the peer. In addition, unless overridden -# with the user option, <n> will be used as the name to send to the peer -# when authenticating the local system to the peer. (Note that pppd does -# not append the domain name to <n>.) -#name <n> - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -#usehostname - -# Set the assumed name of the remote system for authentication purposes -# to <n>. -#remotename <n> - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -# login - -# If this option is given, pppd will send an LCP echo-request frame to the -# peer every n seconds. Normally the peer should respond to the echo-request -# by sending an echo-reply. This option can be used with the -# lcp-echo-failure option to detect that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Set the LCP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#lcp-restart <n> - -# Set the maximum number of LCP terminate-request transmissions to <n> -# (default 3). -#lcp-max-terminate <n> - -# Set the maximum number of LCP configure-request transmissions to <n> -# (default 10). -#lcp-max-configure <n> - -# Set the maximum number of LCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#lcp-max-failure <n> - -# Set the IPCP restart interval (retransmission timeout) to <n> -# seconds (default 3). -#ipcp-restart <n> - -# Set the maximum number of IPCP terminate-request transmissions to <n> -# (default 3). -#ipcp-max-terminate <n> - -# Set the maximum number of IPCP configure-request transmissions to <n> -# (default 10). -#ipcp-max-configure <n> - -# Set the maximum number of IPCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#ipcp-max-failure <n> - -# Set the PAP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#pap-restart <n> - -# Set the maximum number of PAP authenticate-request transmissions to -# <n> (default 10). -#pap-max-authreq <n> - -# Set the maximum time that pppd will wait for the peer to authenticate -# itself with PAP to <n> seconds (0 means no limit). -#pap-timeout <n> - -# Set the CHAP restart interval (retransmission timeout for -# challenges) to <n> seconds (default 3). -#chap-restart <n> - -# Set the maximum number of CHAP challenge transmissions to <n> -# (default 10). -#chap-max-challenge - -# If this option is given, pppd will rechallenge the peer every <n> -# seconds. -#chap-interval <n> - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Disable the IPXCP and IPX protocols. -# To let pppd pass IPX packets comment this out --- you'll probably also -# want to install ipxripd, and have the Internal IPX Network option enabled -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. -noipx - -# Exit once a connection has been made and terminated. This is the default, -# unless the `persist' or `demand' option has been specified. -#nopersist - -# Do not exit after a connection is terminated; instead try to reopen -# the connection. -#persist - -# Terminate after n consecutive failed connection attempts. -# A value of 0 means no limit. The default value is 10. -#maxfail <n> - -# Initiate the link only on demand, i.e. when data traffic is present. -# With this option, the remote IP address must be specified by the user on -# the command line or in an options file. Pppd will initially configure -# the interface and enable it for IP traffic without connecting to the peer. -# When traffic is available, pppd will connect to the peer and perform -# negotiation, authentication, etc. When this is completed, pppd will -# commence passing data packets (i.e., IP packets) across the link. -#demand - -# Specifies that pppd should disconnect if the link is idle for <n> seconds. -# The link is idle when no data packets (i.e. IP packets) are being sent or -# received. Note: it is not advisable to use this option with the persist -# option without the demand option. If the active-filter option is given, -# data packets which are rejected by the specified activity filter also -# count as the link being idle. -#idle <n> - -# Specifies how many seconds to wait before re-initiating the link after -# it terminates. This option only has any effect if the persist or demand -# option is used. The holdoff period is not applied if the link was -# terminated because it was idle. -#holdoff <n> - -# Wait for up n milliseconds after the connect script finishes for a valid -# PPP packet from the peer. At the end of this time, or when a valid PPP -# packet is received from the peer, pppd will commence negotiation by -# sending its first LCP packet. The default value is 1000 (1 second). -# This wait period only applies if the connect or pty option is used. -#connect-delay <n> - -# Packet filtering: for more information, see pppd(8) -# Any packets matching the filter expression will be interpreted as link -# activity, and will cause a "demand" connection to be activated, and reset -# the idle connection timer. (idle option) -# The filter expression is akin to that of tcpdump(1) -#active-filter <filter-expression> - -# uncomment the line below this if you use PPPoE -#plugin /usr/lib/pppd/plugins/pppoe.so - -# ---<End of File>--- diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local deleted file mode 100755 index c1b0154..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/etc/rc.local +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/bash -. /etc/profile -. ${MV_ROOT}/bin/install_functions.sh -#install initial database -pacman -S --noconfirm mythdb-initial 2>/dev/null - -init_network -/etc/rc.d/alsa-utils start 0 -init_remote -random_theme - -echo $CMDLINE | grep -q NoX -if [ $? = 0 ] -then - echo "No auto X option found" - /usr/bin/chvt 2 -else - /root/startx & -fi - - diff --git a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc b/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc deleted file mode 100644 index 3e5c29c..0000000 --- a/build_tools/clarch/larch/profiles/MV-local/rootoverlay/root/.bashrc +++ /dev/null @@ -1,2 +0,0 @@ -alias ls='ls --color=auto' -PS1='[\u@\h \W]\$ ' |
