summaryrefslogtreecommitdiffstats
path: root/build_tools/clarch/larch/profiles/i686-testing-REMOTE
diff options
context:
space:
mode:
Diffstat (limited to 'build_tools/clarch/larch/profiles/i686-testing-REMOTE')
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/addedpacks170
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cache_packs1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/isolinux.cfg49
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/vbg.jpgbin0 -> 32422 bytes
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/actions.rc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/autologin1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/bash_profile1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/larch063
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/create_overlay.sh1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/locale.gen5
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps2
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.xinitrc19
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/pacman.conf61
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post-process.sh17
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bash_profile1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bashrc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps2
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/init35
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu81
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig65
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.pngbin0 -> 119287 bytes
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xinitrc18
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xsession10
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.allow7
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.deny6
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/menu.lst60
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.conf113
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.shutdown104
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/tweak.sh32
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/pre-process.sh8
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rcconfx19
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom22
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom4
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf49
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i81059
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.267
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa49
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd6
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/hosts.allow13
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab43
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab.larchsave43
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/larch-shutdown47
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/ppp/options352
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local16
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.orig7
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.shutdown7
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bash_profile3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bashrc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xinitrc17
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xsession10
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/slim.conf79
51 files changed, 1853 insertions, 0 deletions
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/addedpacks b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/addedpacks
new file mode 100644
index 0000000..6668d64
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/addedpacks
@@ -0,0 +1,170 @@
+# These are needed to build a live CD
+linhes-live
+squashfs-tools
+lzop
+
+syslinux
+
+# You need a kernel.
+#kernel26 is now in 'base'
+aufs
+
+# To eject a cd
+eject
+
+# Useful for use as installer, etc.
+#ntfsprogs
+#parted
+
+#ddcxinfo-knoppix
+#hwd
+
+sudo
+
+lsof
+cdrkit
+dvd+rw-tools
+
+# Needed by the installer
+#python
+
+#base-devel
+#larch
+
+# generally useful tools which don't require X
+#mtools is required by syslinux
+openssh
+dosfstools
+alsa-lib
+alsa-oss
+alsa-utils
+cdparanoia
+cdrdao
+
+# Xorg packages
+xorg-server
+xorg-xkb-utils
+xorg-xauth
+xorg-server-utils
+xorg-xinit
+xorg-input-drivers
+xterm
+xorg-fonts-100dpi
+xorg-fonts-75dpi
+xorg-res-utils
+
+#xorg-video-drivers
+xf86-video-amd
+xf86-video-apm
+xf86-video-ark
+xf86-video-ati
+xf86-video-chips
+xf86-video-cirrus
+xf86-video-dummy
+xf86-video-fbdev
+xf86-video-glint
+xf86-video-i128
+xf86-video-i740
+#xf86-video-i810
+xf86-video-imstt
+xf86-video-intel
+xf86-video-mga
+xf86-video-neomagic
+xf86-video-nv
+xf86-video-radeonhd
+xf86-video-rendition
+xf86-video-s3
+xf86-video-s3virge
+xf86-video-savage
+xf86-video-siliconmotion
+xf86-video-sis
+xf86-video-sisusb
+#xf86-video-tdfx
+xf86-video-trident
+xf86-video-tseng
+xf86-video-unichrome
+xf86-video-v4l
+xf86-video-vesa
+xf86-video-vga
+#xf86-video-via
+xf86-video-vmware
+xf86-video-voodoo
+
+# X apps
+#luser
+#localed
+
+#xkmap
+
+#gparted
+#larchin
+
+#mythtv
+mythtv
+mytharchive
+mythbrowser
+mythcontrols
+mythflix
+mythgallery
+mythgame
+mythmusic
+mythphone
+myththemes
+mythweather
+mythweb
+mythvideo
+nuvexport
+lirc
+lirc-utils
+mysql
+xmltv
+esd
+
+#Window Manager
+fluxbox
+feh
+
+#Other
+dbus
+hal
+fftw2
+libcdaudio
+iptables
+pkgconfig
+taglib
+
+#MythVantage Installer deps
+bc
+mysql-python
+expect
+curl
+dnsutils
+
+#Wireless
+b43-fwcutter
+ipw2100-fw
+ipw2200-fw
+ipw3945
+ipw3945-ucode
+ipw3945d
+iwlwifi-3945-ucode
+iwlwifi-4965-ucode
+madwifi
+madwifi-utils
+ndiswrapper
+ndiswrapper-utils
+netcfg
+rt2500
+rt2x00-rt61-fw
+rt2x00-rt71w-fw
+tiacx
+tiacx-firmware
+wireless_tools
+wlan-ng26
+wlan-ng26-utils
+zd1211-firmware
+
+#----
+live-installer
+etcnet
+runit
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cache_packs b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cache_packs
new file mode 100644
index 0000000..b95e6f4
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cache_packs
@@ -0,0 +1 @@
+mythdb-initial
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/isolinux.cfg
new file mode 100644
index 0000000..26a365a
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/isolinux.cfg
@@ -0,0 +1,49 @@
+default vesamenu.c32
+prompt 0
+timeout 50
+
+MENU BACKGROUND vbg.jpg
+MENU COLOR border 31;40 #90ffff00 #00000000 std
+MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
+
+MENU TITLE LinHES: The Linux Home Entertainment System
+
+label linux
+MENU LABEL LinHES with Splashy (default).
+kernel vmlinuz
+append initrd=larch.img vga=791 quiet splash
+
+label linux-nosplash
+MENU LABEL LinHES without splash screen.
+kernel vmlinuz
+append initrd=larch.img
+
+label linux-splash
+MENU LABEL LinHES with splash screen.
+kernel vmlinuz
+append initrd=larch.img vga=791 quiet splash
+
+label linux-i810
+MENU LABEL with Intel i810 driver (DRI disabled)
+kernel vmlinuz
+append initrd=larch.img i810
+
+label linux-nox
+MENU LABEL Boot to console (without X windowing)
+kernel vmlinuz
+append initrd=larch.img 3
+
+label linux-c2r
+MENU LABEL LinHES: copy-to-ram (also activates swap)
+kernel vmlinuz
+append initrd=larch.img c2r
+
+label linux-swap
+MENU LABEL LinHES: Use swap
+kernel vmlinuz
+append initrd=larch.img swap
+
+
+label memtest
+MENU LABEL Memory tester
+kernel memtest
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/vbg.jpg
new file mode 100644
index 0000000..43fbdd2
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/isolinux/vbg.jpg
Binary files differ
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/actions.rc
new file mode 100644
index 0000000..dd95b26
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/actions.rc
@@ -0,0 +1,3 @@
+type=0
+orientation=1
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/autologin
new file mode 100644
index 0000000..93ca142
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/autologin
@@ -0,0 +1 @@
+root \ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/bash_profile
new file mode 100644
index 0000000..c49349b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/bash_profile
@@ -0,0 +1 @@
+. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/larch0
new file mode 100644
index 0000000..c80b7c2
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/cd-root/larch/copy/larch0
@@ -0,0 +1,63 @@
+# This is a script 'sourced' from the installation script larch-tidy.
+# Its purpose is to remove custom live-only stuff from a just-installed
+# system.
+# ${INSTALL} is the path to the installed system root directory.
+
+rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
+
+if [ -f ${INSTALL}/etc/rc.local.orig ]; then
+ mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
+fi
+if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
+ mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
+fi
+
+# slim is currently started in inittab
+#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf
+
+# Copy xorg.conf.i810 to target xorg.conf if necessary
+if ! [ -f /etc/X11/xorg.conf ]; then
+ if grep i810 /proc/cmdline &>/dev/null; then
+ cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf
+ fi
+fi
+
+#***************************************************#
+# Replace uses of larchquit in xfce panels and menu.#
+#***************************************************#
+### Unfortunately this isn't very simple. If anyone has a better way of
+### providing different Quit actions in the live version and the version
+### installed to disk from it, please let me know!
+### Maybe it would be better just to provide a special live quit desktop
+### icon which can be removed on installation, like the installation icon.
+
+defaultquit='<builtin name="Quit" cmd="Quit" icon="gnome-logout"/>'
+
+replacequit ()
+{
+ for f in ${INSTALL}$1/.config/xfce4/panel/*; do
+ if grep "^Exec=larchquit" ${f}; then
+ n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" )
+ cp /.livesys/actions.rc \
+ ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc
+ rm ${f}
+
+ sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \
+ ${INSTALL}$1/.config/xfce4/panel/panels.xml
+ fi
+ done
+
+ if [ -f ${INSTALL}$1/.bash_profile ]; then
+ sed -i "s|<app .*cmd=\"larchquit.*/>|${defaultquit}|" \
+ ${INSTALL}$1/.config/xfce4/desktop/menu.xml
+
+ cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session
+ cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile
+ fi
+}
+
+for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \
+ /root /etc/skel; do
+ replacequit ${hd} &>/dev/null
+done
+#***************************************************#
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/create_overlay.sh b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/create_overlay.sh
new file mode 100755
index 0000000..6a4fdee
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/create_overlay.sh
@@ -0,0 +1 @@
+../../run/xpack -r overlay overlay.xpk
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/locale.gen b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/locale.gen
new file mode 100644
index 0000000..760ec23
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/locale.gen
@@ -0,0 +1,5 @@
+# locales for larch (/etc/locale.gen)
+
+en_US ISO-8859-1
+en_US.UTF-8 UTF-8
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
new file mode 100644
index 0000000..5a2b8d6
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.fluxbox/apps
@@ -0,0 +1,2 @@
+[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
+[startup] {sudo /usr/MythVantage/bin/mythvantage}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.xinitrc
new file mode 100755
index 0000000..d988c98
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/overlay/home/mythtv/.xinitrc
@@ -0,0 +1,19 @@
+#!/bin/sh
+. /etc/profile
+#
+# ~/.xinitrc
+#
+# Executed by startx (run your window manager from here)
+#
+
+# exec gnome-session
+# exec startkde
+# exec startxfce4
+# exec icewm
+# exec openbox
+# exec blackbox
+# exec fluxbox
+# exec ratpoison
+# exec dwm
+# ... or any other WM of your choosing ...
+exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pacman.conf b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pacman.conf
new file mode 100755
index 0000000..a1eff65
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pacman.conf
@@ -0,0 +1,61 @@
+#
+# /etc/pacman.conf
+# from pacman.conf MV
+# NOTE: If you find a mirror that is geographically close to you, please
+# move it to the top of the server list, so pacman will choose it
+# first.
+#
+# To re-sort your mirror lists by ping/traceroute results, use the
+# /usr/bin/sortmirrors script. It requires the "netselect" package.
+#
+
+# See the pacman manpage for option directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+LogFile = /var/log/pacman.log
+NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
+NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
+NoUpgrade = etc/rc.conf etc/rc.local
+NoUpgrade = etc/modprobe.conf etc/modules.conf
+NoUpgrade = etc/lilo.conf boot/grub/menu.lst
+NoUpgrade = data/srv/hobbit/etc/bb-hosts
+NoUpgrade = etc/func/minion.conf
+
+HoldPkg = pacman glibc
+CacheDir = /data/var/cache/pacman/pkg
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+
+#
+# REPOSITORIES
+# - can be defined here or included from another file
+# - pacman will search repositories in the order defined here.
+# - local/custom mirrors can be added here or in separate files
+#
+[core-testing]
+Server = http://knoppmyth.net/repo/i686/core-testing
+
+[extra-testing]
+Server = http://knoppmyth.net/repo/i686/extra-testing
+
+
+########################ARCH DEFAULTS#############
+#[core]
+# Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+#[extra]
+# Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+#[community]
+# Add your preferred servers here, they will be used first
+#Include = /etc/pacman.d/mirrorlist
+
+# Unstable is disabled by default. To enable, uncomment the following
+# two lines. You can add preferred servers immediately after the header,
+# and they will be used before the default mirrors.
+#[unstable]
+#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post-process.sh b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post-process.sh
new file mode 100755
index 0000000..131b907
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post-process.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+echo $@
+INSTDIR=$1
+PROFILE=$2
+
+#everything below this point is specific to MythVantage
+cp -rp $PROFILE/post_process $INSTDIR/.tweak
+chroot $INSTDIR .tweak/tweak.sh
+rm -rf $INSTDIR/.tweak
+
+#find the size of the install.
+#This is used to calculate progress on the install
+tsize=`du -sm $INSTDIR/ | cut -f1`
+echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
+upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
+echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bash_profile
new file mode 100644
index 0000000..c49349b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bash_profile
@@ -0,0 +1 @@
+. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bashrc
new file mode 100644
index 0000000..fcabce0
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.bashrc
@@ -0,0 +1,3 @@
+alias ls='ls --color=auto'
+PS1='[\u@\h \W]\$ '
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
new file mode 100644
index 0000000..52db7fe
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/apps
@@ -0,0 +1,2 @@
+[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
+[startup] {mythfrontend}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
new file mode 100644
index 0000000..aa4040a
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/init
@@ -0,0 +1,35 @@
+session.screen0.slit.placement: BottomRight
+session.screen0.slit.direction: Vertical
+session.screen0.slit.onTop: False
+session.screen0.slit.autoHide: True
+session.screen0.tab.placement: Top
+session.screen0.toolbar.onTop: False
+session.screen0.toolbar.visible: False
+session.screen0.toolbar.autoHide: False
+session.screen0.toolbar.placement: BottomCenter
+session.screen0.toolbar.widthPercent: 66
+session.screen0.workspaceNames: one,two,three,four
+session.screen0.strftimeFormat: %k:%M
+session.screen0.focusNewWindows: True
+session.screen0.focusModel: ClickToFocus
+session.screen0.fullMaximization: False
+session.screen0.edgeSnapThreshold: 0
+session.screen0.rowPlacementDirection: LeftToRight
+session.screen0.workspaces: 4
+session.screen0.focusLastWindow: True
+session.screen0.colPlacementDirection: TopToBottom
+session.screen0.windowPlacement: RowSmartPlacement
+session.screen0.tab.width: 64
+session.screen0.tab.height: 16
+session.screen0.showwindowposition: true
+session.opaqueMove: False
+session.autoRaiseDelay: 250
+session.menuFile: ~/.fluxbox/menu
+session.cacheLife: 5
+session.styleFile: /usr/share/fluxbox/styles/bora_black
+session.keyFile: ~/.fluxbox/keys
+session.colorsPerChannel: 4
+session.doubleClickInterval: 250
+session.cacheMax: 200
+session.imageDither: True
+session.configVersion: 1
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
new file mode 100644
index 0000000..858090e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menu
@@ -0,0 +1,81 @@
+# Generated by fluxbox-generate_menu
+#
+# If you read this it means you want to edit this file manually, so here
+# are some useful tips:
+#
+# - You can add your own menu-entries to ~/.fluxbox/usermenu
+#
+# - If you miss apps please let me know and I will add them for the next
+# release.
+#
+# - The -r option prevents removing of empty menu entries and lines which
+# makes things much more readable.
+#
+# - To prevent any other app from overwriting your menu
+# you can change the menu name in .fluxbox/init to:
+# session.menuFile: /home/mythtv/.fluxbox/my-menu
+[begin] (Fluxbox)
+[encoding] {UTF-8}
+ [exec] (xterm) {xterm}
+ [exec] () {} execname is NULL; cannot lookup
+ [exec] (Run) {fbrun }
+[submenu] (Terminals)
+ [exec] (xterm) {xterm}
+[end]
+[submenu] (Editors)
+ [exec] (xedit) {xedit}
+ [exec] (nano) {xterm -e nano}
+ [exec] (vi) {xterm -e vi}
+[end]
+[submenu] (Multimedia)
+[submenu] (Audio)
+ [exec] (alsamixer) {xterm -e alsamixer}
+[end]
+[submenu] (Video)
+ [exec] (gmplayer) {gmplayer}
+[end]
+[submenu] (X-utils)
+ [exec] (xfontsel) {xfontsel}
+ [exec] (xman) {xman}
+ [exec] (xload) {xload}
+ [exec] (xbiff) {xbiff}
+ [exec] (xclock) {xclock}
+ [exec] (xmag) {xmag}
+ [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults}
+[end]
+[end]
+[submenu] (Office)
+ [exec] (xclock) {xclock}
+ [exec] (xcalc) {xcalc}
+[end]
+[submenu] (Games)
+ [exec] (xeyes) {xeyes}
+[end]
+[submenu] (System Tools)
+ [exec] (top) {xterm -e top}
+[end]
+[submenu] (fluxbox menu)
+ [config] (Configure)
+[submenu] (System Styles) {Choose a style...}
+ [stylesdir] (/usr/share/fluxbox/styles)
+[end]
+[submenu] (User Styles) {Choose a style...}
+ [stylesdir] (~/.fluxbox/styles)
+[end]
+ [workspaces] (Workspace List)
+[submenu] (Tools)
+ [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center}
+ [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg}
+ [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png}
+ [exec] (Run) {fbrun }
+ [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu }
+[end]
+ [commanddialog] (Fluxbox Command)
+ [reconfig] (Reload config)
+ [restart] (Restart)
+ [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center}
+ [separator]
+ [exit] (Exit)
+[end]
+[endencoding]
+[end]
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
new file mode 100644
index 0000000..ef5b398
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/menuconfig
@@ -0,0 +1,65 @@
+# This file is read by fluxbox-generate_menu. If you don't like a
+# default you can change it here. Don't forget to remove the # in front
+# of the line.
+
+# Your favourite terminal. Put the command in quotes if you want to use
+# options. Put a backslash in before odd chars
+# MY_TERM='Eterm --tint \#123456'
+# MY_TERM='aterm -tint $(random_color)'
+
+# Your favourite browser. You can also specify options.
+# MY_BROWSER=mozilla
+
+# Name of the outputfile
+# MENUFILENAME=/home/mythtv/.fluxbox/menu
+
+# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
+
+# standard url for console-browsers
+# HOMEPAGE=fluxbox.org
+
+# location with your own menu-entries
+# USERMENU=~/.fluxbox/usermenu
+
+# Put the launcher you would like to use here
+# LAUNCHER=fbrun
+# LAUNCHER=fbgm
+
+# Options for fbrun
+# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
+
+# --- PREFIX'es
+# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
+# your prefix is: /usr
+
+# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
+# there should be no need to specify them.
+#
+# PREFIX=/usr
+# GNOME_PREFIX=/opt/gnome
+# KDE_PREFIX=/opt/kde
+
+
+# Sepparate the list of background-dirs with semicolumns ':'
+# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
+
+
+# --- Boolean variables.
+# Setting a variable to no'' won't help. Comment them out if you don't
+# want them. Setting are overruled by the command-line options.
+
+# Include all backgrounds in your backgrounds-directory
+# BACKGROUNDMENUITEM=yes
+
+# Include kde-menus
+# KDEMENU=yes
+
+# Include gnome-menus
+# GNOMEMENU=yes
+
+# enable sudo commands
+# DOSUDO=yes
+
+# Don't cleanup the menu
+# REMOVE=no
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
new file mode 100644
index 0000000..83da80c
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.fluxbox/wallpaper.png
Binary files differ
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xinitrc
new file mode 100755
index 0000000..911e76e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xinitrc
@@ -0,0 +1,18 @@
+#!/bin/sh
+
+#
+# ~/.xinitrc
+#
+# Executed by startx (run your window manager from here)
+#
+
+# exec gnome-session
+# exec startkde
+# exec startxfce4
+# exec icewm
+# exec openbox
+# exec blackbox
+exec fluxbox
+# exec ratpoison
+# exec dwm
+# ... or any other WM of your choosing ...
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xsession
new file mode 100755
index 0000000..a16dc0b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/home/mythtv/.xsession
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+#
+# ~/.xsession
+#
+# Executed by xdm/gdm/kdm at login
+#
+
+/bin/bash --login -i ~/.xinitrc
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.allow
new file mode 100644
index 0000000..ca19dbb
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.allow
@@ -0,0 +1,7 @@
+#
+# /etc/hosts.allow
+#
+ALL: 192.168.
+ALL: 10.
+ALL: 127.0.0.1
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.deny
new file mode 100755
index 0000000..ca30ab4
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/hosts.deny
@@ -0,0 +1,6 @@
+#
+# /etc/hosts.deny
+#
+ALL
+
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/menu.lst b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/menu.lst
new file mode 100755
index 0000000..ce33757
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/menu.lst
@@ -0,0 +1,60 @@
+# Config file for GRUB - The GNU GRand Unified Bootloader
+# /boot/grub/menu.lst
+
+# DEVICE NAME CONVERSIONS
+#
+# Linux Grub
+# -------------------------
+# /dev/fd0 (fd0)
+# /dev/hda (hd0)
+# /dev/hdb2 (hd1,1)
+# /dev/hda3 (hd0,2)
+#
+
+# FRAMEBUFFER RESOLUTION SETTINGS
+# +-------------------------------------------------+
+# | 640x480 800x600 1024x768 1280x1024
+# ----+--------------------------------------------
+# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
+# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
+# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
+# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
+# +-------------------------------------------------+
+
+# general configuration:
+timeout 5
+default 0
+#color light-blue/black light-cyan/blue
+
+# boot sections follow
+# each is implicitly numbered from 0 in the order of appearance below
+#
+# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
+#
+#-*
+hiddenmenu
+
+# (0) normal
+title LinHes
+root (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
+initrd /boot/kernel26.img
+
+# (1) bootsplash
+title LinHes-splashy
+root (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1
+initrd /boot/kernel26.img
+
+# (2) noautologin
+title STB-nologin
+root (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x318 splash=silent,theme:darch console=tty1 noautologin
+initrd /boot/kernel26.img
+
+
+# (3) normal
+title LinHes-init
+root (hd0,0)
+kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1
+initrd /boot/kernel26.img
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.conf b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.conf
new file mode 100755
index 0000000..1d5b377
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.conf
@@ -0,0 +1,113 @@
+#
+# /etc/rc.conf - Main Configuration for Arch Linux
+#
+
+#
+# -----------------------------------------------------------------------
+# LOCALIZATION
+# -----------------------------------------------------------------------
+#
+# LOCALE: available languages can be listed with the 'locale -a' command
+# HARDWARECLOCK: set to "UTC" or "localtime"
+# TIMEZONE: timezones are found in /usr/share/zoneinfo
+# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
+# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
+# CONSOLEMAP: found in /usr/share/kbd/consoletrans
+# USECOLOR: use ANSI color sequences in startup messages
+#
+LOCALE="en_US.utf8"
+HARDWARECLOCK="UTC"
+TIMEZONE="US/Central"
+KEYMAP="us"
+CONSOLEFONT=
+CONSOLEMAP=
+USECOLOR="no"
+
+#
+# -----------------------------------------------------------------------
+# HARDWARE
+# -----------------------------------------------------------------------
+#
+# Scan hardware and load required modules at bootup
+MOD_AUTOLOAD="yes"
+if [ -f /etc/systemconfig ]
+then
+ . /etc/systemconfig
+fi
+
+if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
+then
+ ALSABLACKLIST="soundcore"
+else
+ if [ x$Audiotype = xOSS ]
+ then
+ ALSABLACKLIST="soundcore"
+ else
+ ALSABLACKLIST=""
+ fi
+fi
+
+# Module Blacklist - modules in this list will never be loaded by udev
+MOD_BLACKLIST=($ALSABLACKLIST)
+#
+# Modules to load at boot-up (in this order)
+# - prefix a module with a ! to blacklist it
+#
+MODULES=()
+# Scan for LVM volume groups at startup, required if you use LVM
+USELVM="no"
+
+#
+# -----------------------------------------------------------------------
+# NETWORKING
+# -----------------------------------------------------------------------
+#
+HOSTNAME=`cat /etc/hostname`
+
+#The following is only used on the install. After the first boot everything is set from /etc/net.
+
+
+#
+# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
+# interfaces.
+#
+# Interfaces to start at boot-up (in this order)
+# Declare each interface then list in INTERFACES
+# - prefix an entry in INTERFACES with a ! to disable it
+# - no hyphens in your interface names - Bash doesn't like it
+#
+# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
+#
+lo="lo 127.0.0.1"
+#eth0="dhcp"
+INTERFACES=(lo )
+#
+# Routes to start at boot-up (in this order)
+# Declare each route then list in ROUTES
+# - prefix an entry in ROUTES with a ! to disable it
+#
+gateway="default gw 192.168.0.1"
+ROUTES=(!gateway)
+#
+# Enable these network profiles at boot-up. These are only useful
+# if you happen to need multiple network configurations (ie, laptop users)
+# - set to 'menu' to present a menu during boot-up (dialog package required)
+# - prefix an entry with a ! to disable it
+#
+# Network profiles are found in /etc/network-profiles
+#
+#NET_PROFILES=(main)
+
+#
+# -----------------------------------------------------------------------
+# DAEMONS
+# -----------------------------------------------------------------------
+#
+# Daemons to start at boot-up (in this order)
+# - prefix a daemon with a ! to disable it
+# - prefix a daemon with a @ to start it up in the background
+#
+#DAEMONS=(syslog-ng network netfs crond)
+DAEMONS=(!syslog-ng !hotplug !pcmcia network mysqld dbus avahi-daemon)
+
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.shutdown
new file mode 100755
index 0000000..1a8cdbe
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/rc.shutdown
@@ -0,0 +1,104 @@
+#!/bin/bash
+#
+# /etc/rc.shutdown
+#
+
+. /etc/rc.conf
+. /etc/rc.d/functions
+
+# avoid staircase effect
+/bin/stty onlcr
+
+echo " "
+printhl "Initiating Shutdown..."
+echo " "
+
+if [ -x /etc/rc.local.shutdown ]; then
+ /etc/rc.local.shutdown
+fi
+
+if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
+ # Shutdown daemons
+ let i=${#DAEMONS[@]}
+ while [[ i -ge 0 ]]; do
+ if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
+ /etc/rc.d/${DAEMONS[$i]#@} stop
+ fi
+ let i=i-1
+ done
+ # find any leftover daemons and shut them down
+ if [ -d /var/run/daemons ]; then
+ for daemon in `ls /var/run/daemons`; do
+ /etc/rc.d/$daemon stop
+ done
+ fi
+fi
+
+# Terminate all processes
+stat_busy "Sending SIGTERM To Processes"
+/sbin/killall5 -15 &> /dev/null
+/bin/sleep 5
+stat_done
+
+stat_busy "Sending SIGKILL To Processes"
+/sbin/killall5 -9 &> /dev/null
+/bin/sleep 1
+stat_done
+
+stat_busy "Saving Random Seed"
+/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
+stat_done
+
+stat_busy "Saving System Clock"
+if [ "$HARDWARECLOCK" = "UTC" ]; then
+ /sbin/hwclock --directisa --utc --systohc
+else
+ /sbin/hwclock --directisa --localtime --systohc
+fi
+stat_done
+
+# removing psmouse module to fix some reboot issues on newer laptops
+modprobe -r psmouse >/dev/null 2>&1
+
+# Write to wtmp file before unmounting
+/sbin/halt -w
+
+stat_busy "Deactivating Swap"
+/sbin/swapoff -a
+stat_done
+
+stat_busy "Unmounting Filesystems"
+/bin/umount -a
+stat_done
+
+if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
+ if [ -d /etc/lvm -a -x /sbin/lvm ]; then
+ /bin/mount -n -t sysfs none /sys 2>/dev/null
+ if [ -d /sys/block ]; then
+ stat_busy "Deactivating LVM2 groups"
+ /sbin/lvm vgchange --ignorelockingfailure -a n
+ stat_done
+ umount /sys
+ fi
+ fi
+fi
+
+stat_busy "Remounting Root Filesystem Read-only"
+/bin/mount -n -o remount,ro /
+stat_done
+exit 0
+# Power off or reboot
+if [ "$RUNLEVEL" = "0" ]; then
+ printsep
+ printhl "${C_H2}POWER OFF"
+ /sbin/poweroff -d -f -h -i
+else
+ printsep
+ printhl "${C_H2}REBOOTING"
+ # adding kexec support
+ [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
+ /sbin/reboot -d -f -i
+fi
+
+# End of file
+# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/tweak.sh b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/tweak.sh
new file mode 100755
index 0000000..5c73cf4
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/post_process/tweak.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
+echo 'setting mythtv password to "a" '
+passwd mythtv <<EOF
+a
+a
+EOF
+
+echo 'setting root password to "a" '
+passwd root <<EOF
+a
+a
+EOF
+
+#edit /home/mythtv/.xinitrc and uncomment exec fluxbox
+cp -rvpf /.tweak/home/mythtv /home/
+
+
+
+chown -R mythtv.mythtv /home/mythtv/
+
+
+
+cp -f /.tweak/hosts.allow /etc/hosts.allow
+cp -f /.tweak/securetty /etc/securetty
+cp -f /.tweak/rc.conf /etc/rc.conf
+#cp -f rc.local /etc/rc.local
+#cp -f locale.gen /etc/locale.gen
+
+cp -f /.tweak/rc.shutdown /etc/rc.shutdown
+cp -f /.tweak/menu.lst /boot/grub/menu.lst
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pre-process.sh b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pre-process.sh
new file mode 100755
index 0000000..5bc1f9c
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/pre-process.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+rm -f overlay.xpk
+if [ -d overlay/home/mythtv ]
+then
+ chown -R 1000 overlay/home/mythtv
+fi
+./create_overlay.sh
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rcconfx b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rcconfx
new file mode 100644
index 0000000..23e671e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rcconfx
@@ -0,0 +1,19 @@
+#
+# patch file for /etc/rc.conf
+#
+
+LOCALE="en_US.utf8"
+HARDWARECLOCK="UTC"
+TIMEZONE="UTC"
+KEYMAP="us"
+
+MODULES=(floppy)
+
+HOSTNAME="larch5"
+
+USELVM="yes"
+
+#eth0="dhcp"
+
+DAEMONS=(syslog-ng network mysqld dbus hal !slim sshd)
+SPLASH="splashy"
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
new file mode 100644
index 0000000..8e3ec5e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/startx.custom
@@ -0,0 +1,22 @@
+if grep -v nox /proc/cmdline &>/dev/null && \
+ [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
+ if grep i810 /proc/cmdline &>/dev/null; then
+ startx -- -config xorg.conf.i810
+ else
+ startx
+ fi
+
+ # Maybe there should be some code here to handle a failed startx?
+
+ # The 'return' value is at /tmp/xlogout
+ # If there is nothing there, switch user to 'newuser'
+ # If there is also nothing there, login as root
+ # - if already root, fall through to terminal
+
+ if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
+ logout
+ elif [ ${UID} -ne 0 ]; then
+ echo "root" >/tmp/newuser
+ logout
+ fi
+fi
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
new file mode 100644
index 0000000..5f04171
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xinit/xinitrc.custom
@@ -0,0 +1,4 @@
+# Set the keymap
+xkmap-set
+
+exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
new file mode 100644
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+ Identifier "X.org Configured"
+ Screen 0 "Screen0" 0 0
+EndSection
+
+Section "Device"
+ Identifier "Card0"
+ Driver "vesa"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ HorizSync 30.0 - 65.0
+ VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Card0"
+ Monitor "Monitor0"
+ DefaultDepth 16
+ SubSection "Display"
+ Viewport 0 0
+ Depth 1
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 4
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 8
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 15
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 16
+ Modes "1024x768" "800x600"
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 24
+ EndSubSection
+EndSection
+
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
new file mode 100644
index 0000000..9615569
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810
@@ -0,0 +1,59 @@
+Section "ServerLayout"
+ Identifier "X.org Configured"
+ Screen 0 "Screen0" 0 0
+EndSection
+
+Section "Device"
+ ### Available Driver options are:-
+ ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+ ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+ ### [arg]: arg optional
+ #Option "NoAccel" # [<bool>]
+ #Option "SWcursor" # [<bool>]
+ #Option "ColorKey" # <i>
+ #Option "CacheLines" # <i>
+ #Option "Dac6Bit" # [<bool>]
+ #Option "DRI" # [<bool>]
+ #Option "NoDDC" # [<bool>]
+ #Option "ShowCache" # [<bool>]
+ #Option "XvMCSurfaces" # <i>
+ #Option "PageFlip" # [<bool>]
+ Option "DRI" "False"
+ #Option "AccelMethod" "exa"
+ #Option "MigrationHeuristic" "greedy"
+ #Option "ExaNoComposite" "False"
+ Identifier "Card0"
+ Driver "intel"
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Card0"
+ Monitor "Monitor0"
+ SubSection "Display"
+ Viewport 0 0
+ Depth 1
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 4
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 8
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 15
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 16
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 24
+ EndSubSection
+EndSection
+
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
new file mode 100644
index 0000000..a295b38
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.i810.2
@@ -0,0 +1,67 @@
+Section "ServerLayout"
+ Identifier "X.org Configured"
+ Screen 0 "Screen0" 0 0
+EndSection
+
+Section "Device"
+ ### Available Driver options are:-
+ ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
+ ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
+ ### [arg]: arg optional
+ #Option "NoAccel" # [<bool>]
+ #Option "SWcursor" # [<bool>]
+ #Option "ColorKey" # <i>
+ #Option "CacheLines" # <i>
+ #Option "Dac6Bit" # [<bool>]
+ #Option "DRI" # [<bool>]
+ #Option "NoDDC" # [<bool>]
+ #Option "ShowCache" # [<bool>]
+ #Option "XvMCSurfaces" # <i>
+ #Option "PageFlip" # [<bool>]
+ Option "DRI" "False"
+ #Option "AccelMethod" "exa"
+ #Option "MigrationHeuristic" "greedy"
+ #Option "ExaNoComposite" "False"
+ Identifier "Card0"
+ Driver "intel"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ HorizSync 30.0 - 65.0
+ VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Card0"
+ Monitor "Monitor0"
+ DefaultDepth 16
+ SubSection "Display"
+ Viewport 0 0
+ Depth 1
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 4
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 8
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 15
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 16
+ Modes "1024x768" "800x600"
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 24
+ EndSubSection
+EndSection
+
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
new file mode 100644
index 0000000..6d11b2e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/X11/xorg.conf.vesa
@@ -0,0 +1,49 @@
+Section "ServerLayout"
+ Identifier "X.org Configured"
+ Screen 0 "Screen0" 0 0
+EndSection
+
+Section "Device"
+ Identifier "Card0"
+ Driver "vesa"
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ HorizSync 30.0 - 65.0
+ VertRefresh 50.0 - 75.0
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "Card0"
+ Monitor "Monitor0"
+ DefaultDepth 16
+ SubSection "Display"
+ Viewport 0 0
+ Depth 1
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 4
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 8
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 15
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 16
+ Modes "1024x768" "800x600"
+ EndSubSection
+ SubSection "Display"
+ Viewport 0 0
+ Depth 24
+ EndSubSection
+EndSection
+
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
new file mode 100644
index 0000000..ab53c30
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/conf.d/dhcpcd
@@ -0,0 +1,6 @@
+#
+# Arguments to be passed to the DHCP client daemon
+#
+
+DHCPCD_ARGS="-t 10 -h $HOSTNAME"
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/hosts.allow
new file mode 100644
index 0000000..19bc4d8
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/hosts.allow
@@ -0,0 +1,13 @@
+#
+# /etc/hosts.allow
+#
+
+ALL: 127.0.0.1
+
+# To allow ssh in from anywhere
+sshd: ALL
+
+# To allow ssh in from local net (example)
+#sshd: 192.168.178.0/255.255.255.0
+
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab
new file mode 100644
index 0000000..2de483f
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab
@@ -0,0 +1,43 @@
+#
+# /etc/inittab
+#
+
+# Runlevels:
+# 0 Halt
+# 1(S) Single-user
+# 2 Not used
+# 3 Multi-user
+# 4 Not used
+# 5 X11
+# 6 Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:5:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
+c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
+c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+#x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab.larchsave
new file mode 100644
index 0000000..2de483f
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/inittab.larchsave
@@ -0,0 +1,43 @@
+#
+# /etc/inittab
+#
+
+# Runlevels:
+# 0 Halt
+# 1(S) Single-user
+# 2 Not used
+# 3 Multi-user
+# 4 Not used
+# 5 X11
+# 6 Reboot
+
+## Only one of the following two lines can be uncommented!
+# Boot to console
+id:5:initdefault:
+# Boot to X11
+#id:5:initdefault:
+
+rc::sysinit:/etc/rc.sysinit
+rs:S1:wait:/etc/rc.single
+rm:2345:wait:/etc/rc.multi
+rh:06:wait:/etc/rc.shutdown
+su:S:wait:/sbin/sulogin -p
+
+# -8 options fixes umlauts problem on login
+c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
+c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
+c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
+c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
+c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
+c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
+c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
+
+ca::ctrlaltdel:/sbin/shutdown -t3 -r now
+
+# Example lines for starting a login manager
+#x:5:respawn:/usr/bin/xdm -nodaemon
+#x:5:respawn:/usr/sbin/gdm -nodaemon
+#x:5:respawn:/opt/kde/bin/kdm -nodaemon
+#x:5:respawn:/usr/bin/slim >& /dev/null
+
+# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/larch-shutdown
new file mode 100644
index 0000000..d614d4b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/larch-shutdown
@@ -0,0 +1,47 @@
+# Functions used by rc.shutdown
+# Modified versions for larch live systems
+
+f_saveclock ()
+{
+ :
+}
+
+f_swapoff ()
+{
+ ############################# Include session saving functions
+ # . /opt/larch-live/session-save/shutdown2
+ # if [ -f /tmp/checkse ]; then
+ # . /tmp/checkse
+ #else
+ # checkse
+ # fi
+
+ if [ -n "${saving}" ] && ! session_save; then
+ echo
+ echo "If you know what you are doing, you may be able to recover"
+ echo "something from this unpleasant situation."
+ echo
+ echo "You may use the command line to investigate further ..."
+ echo
+ echo "When finished please enter 'exit', the shutdown process will"
+ echo "then continue."
+ sh -i
+ fi
+
+ #############################
+
+ stat_busy "Deactivating Swap"
+ /sbin/swapoff -a
+ stat_done
+}
+
+f_remountro ()
+{
+ if [ -n "${ejectdev}" ]; then
+ echo "Ejecting live CD"
+ eject ${ejectdev}
+ echo "sleeping for 6 seconds"
+ sleep 6
+
+ fi
+}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/ppp/options
new file mode 100644
index 0000000..237c390
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/ppp/options
@@ -0,0 +1,352 @@
+# /etc/ppp/options
+#
+# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
+# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
+# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
+# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
+#
+# To quickly see what options are active in this file, use this command:
+# egrep -v '#|^ *$' /etc/ppp/options
+
+# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
+# Two Servers can be remotely configured
+# ms-dns 192.168.1.1
+# ms-dns 192.168.1.2
+
+# Specify which WINS Servers the incoming connection Win95 or WinNT should use
+# ms-wins 192.168.1.50
+# ms-wins 192.168.1.51
+
+# Run the executable or shell command specified after pppd has
+# terminated the link. This script could, for example, issue commands
+# to the modem to cause it to hang up if hardware modem control signals
+# were not available.
+#disconnect "chat -- \d+++\d\c OK ath0 OK"
+
+# async character map -- 32-bit hex; each bit is a character
+# that needs to be escaped for pppd to receive it. 0x00000001
+# represents '\x01', and 0x80000000 represents '\x1f'.
+asyncmap 0
+
+# Require the peer to authenticate itself before allowing network
+# packets to be sent or received.
+# Please do not disable this setting. It is expected to be standard in
+# future releases of pppd. Use the call option (see manpage) to disable
+# authentication for specific peers.
+#auth
+
+# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
+# on the serial port.
+crtscts
+
+# Use software flow control (i.e. XON/XOFF) to control the flow of data
+# on the serial port.
+#xonxoff
+
+# Specifies that certain characters should be escaped on transmission
+# (regardless of whether the peer requests them to be escaped with its
+# async control character map). The characters to be escaped are
+# specified as a list of hex numbers separated by commas. Note that
+# almost any character can be specified for the escape option, unlike
+# the asyncmap option which only allows control characters to be
+# specified. The characters which may not be escaped are those with hex
+# values 0x20 - 0x3f or 0x5e.
+#escape 11,13,ff
+
+# Don't use the modem control lines.
+#local
+
+# Specifies that pppd should use a UUCP-style lock on the serial device
+# to ensure exclusive access to the device.
+lock
+
+# Don't show the passwords when logging the contents of PAP packets.
+# This is the default.
+hide-password
+
+# When logging the contents of PAP packets, this option causes pppd to
+# show the password string in the log message.
+#show-password
+
+# Use the modem control lines. On Ultrix, this option implies hardware
+# flow control, as for the crtscts option. (This option is not fully
+# implemented.)
+modem
+
+# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
+# will ask the peer to send packets of no more than <n> bytes. The
+# minimum MRU value is 128. The default MRU value is 1500. A value of
+# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
+# bytes of data).
+#mru 542
+
+# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
+# notation (e.g. 255.255.255.0).
+#netmask 255.255.255.0
+
+# Disables the default behaviour when no local IP address is specified,
+# which is to determine (if possible) the local IP address from the
+# hostname. With this option, the peer will have to supply the local IP
+# address during IPCP negotiation (unless it specified explicitly on the
+# command line or in an options file).
+#noipdefault
+
+# Enables the "passive" option in the LCP. With this option, pppd will
+# attempt to initiate a connection; if no reply is received from the
+# peer, pppd will then just wait passively for a valid LCP packet from
+# the peer (instead of exiting, as it does without this option).
+#passive
+
+# With this option, pppd will not transmit LCP packets to initiate a
+# connection until a valid LCP packet is received from the peer (as for
+# the "passive" option with old versions of pppd).
+#silent
+
+# Don't request or allow negotiation of any options for LCP and IPCP
+# (use default values).
+#-all
+
+# Disable Address/Control compression negotiation (use default, i.e.
+# address/control field disabled).
+#-ac
+
+# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
+# all control characters).
+#-am
+
+# Don't fork to become a background process (otherwise pppd will do so
+# if a serial device is specified).
+#-detach
+
+# Disable IP address negotiation (with this option, the remote IP
+# address must be specified with an option on the command line or in
+# an options file).
+#-ip
+
+# Disable IPCP negotiation and IP communication. This option should
+# only be required if the peer is buggy and gets confused by requests
+# from pppd for IPCP negotiation.
+#noip
+
+# Disable magic number negotiation. With this option, pppd cannot
+# detect a looped-back line.
+#-mn
+
+# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
+# 1500).
+#-mru
+
+# Disable protocol field compression negotiation (use default, i.e.
+# protocol field compression disabled).
+#-pc
+
+# Require the peer to authenticate itself using PAP.
+#+pap
+
+# Don't agree to authenticate using PAP.
+#-pap
+
+# Require the peer to authenticate itself using CHAP [Cryptographic
+# Handshake Authentication Protocol] authentication.
+#+chap
+
+# Don't agree to authenticate using CHAP.
+#-chap
+
+# Disable negotiation of Van Jacobson style IP header compression (use
+# default, i.e. no compression).
+#-vj
+
+# Increase debugging level (same as -d). If this option is given, pppd
+# will log the contents of all control packets sent or received in a
+# readable form. The packets are logged through syslog with facility
+# daemon and level debug. This information can be directed to a file by
+# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
+# pppd is compiled with extra debugging enabled, it will log messages
+# using facility local2 instead of daemon).
+#debug
+
+# Append the domain name <d> to the local host name for authentication
+# purposes. For example, if gethostname() returns the name porsche,
+# but the fully qualified domain name is porsche.Quotron.COM, you would
+# use the domain option to set the domain name to Quotron.COM.
+#domain <d>
+
+# Enable debugging code in the kernel-level PPP driver. The argument n
+# is a number which is the sum of the following values: 1 to enable
+# general debug messages, 2 to request that the contents of received
+# packets be printed, and 4 to request that the contents of transmitted
+# packets be printed.
+#kdebug n
+
+# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
+# requests a smaller value via MRU negotiation, pppd will request that
+# the kernel networking code send data packets of no more than n bytes
+# through the PPP network interface.
+#mtu <n>
+
+# Set the name of the local system for authentication purposes to <n>.
+# This is a privileged option. With this option, pppd will use lines in the
+# secrets files which have <n> as the second field when looking for a
+# secret to use in authenticating the peer. In addition, unless overridden
+# with the user option, <n> will be used as the name to send to the peer
+# when authenticating the local system to the peer. (Note that pppd does
+# not append the domain name to <n>.)
+#name <n>
+
+# Enforce the use of the hostname as the name of the local system for
+# authentication purposes (overrides the name option).
+#usehostname
+
+# Set the assumed name of the remote system for authentication purposes
+# to <n>.
+#remotename <n>
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system.
+proxyarp
+
+# Use the system password database for authenticating the peer using
+# PAP. Note: mgetty already provides this option. If this is specified
+# then dialin from users using a script under Linux to fire up ppp wont work.
+# login
+
+# If this option is given, pppd will send an LCP echo-request frame to the
+# peer every n seconds. Normally the peer should respond to the echo-request
+# by sending an echo-reply. This option can be used with the
+# lcp-echo-failure option to detect that the peer is no longer connected.
+lcp-echo-interval 30
+
+# If this option is given, pppd will presume the peer to be dead if n
+# LCP echo-requests are sent without receiving a valid LCP echo-reply.
+# If this happens, pppd will terminate the connection. Use of this
+# option requires a non-zero value for the lcp-echo-interval parameter.
+# This option can be used to enable pppd to terminate after the physical
+# connection has been broken (e.g., the modem has hung up) in
+# situations where no hardware modem control lines are available.
+lcp-echo-failure 4
+
+# Set the LCP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#lcp-restart <n>
+
+# Set the maximum number of LCP terminate-request transmissions to <n>
+# (default 3).
+#lcp-max-terminate <n>
+
+# Set the maximum number of LCP configure-request transmissions to <n>
+# (default 10).
+#lcp-max-configure <n>
+
+# Set the maximum number of LCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#lcp-max-failure <n>
+
+# Set the IPCP restart interval (retransmission timeout) to <n>
+# seconds (default 3).
+#ipcp-restart <n>
+
+# Set the maximum number of IPCP terminate-request transmissions to <n>
+# (default 3).
+#ipcp-max-terminate <n>
+
+# Set the maximum number of IPCP configure-request transmissions to <n>
+# (default 10).
+#ipcp-max-configure <n>
+
+# Set the maximum number of IPCP configure-NAKs returned before starting
+# to send configure-Rejects instead to <n> (default 10).
+#ipcp-max-failure <n>
+
+# Set the PAP restart interval (retransmission timeout) to <n> seconds
+# (default 3).
+#pap-restart <n>
+
+# Set the maximum number of PAP authenticate-request transmissions to
+# <n> (default 10).
+#pap-max-authreq <n>
+
+# Set the maximum time that pppd will wait for the peer to authenticate
+# itself with PAP to <n> seconds (0 means no limit).
+#pap-timeout <n>
+
+# Set the CHAP restart interval (retransmission timeout for
+# challenges) to <n> seconds (default 3).
+#chap-restart <n>
+
+# Set the maximum number of CHAP challenge transmissions to <n>
+# (default 10).
+#chap-max-challenge
+
+# If this option is given, pppd will rechallenge the peer every <n>
+# seconds.
+#chap-interval <n>
+
+# With this option, pppd will accept the peer's idea of our local IP
+# address, even if the local IP address was specified in an option.
+#ipcp-accept-local
+
+# With this option, pppd will accept the peer's idea of its (remote) IP
+# address, even if the remote IP address was specified in an option.
+#ipcp-accept-remote
+
+# Disable the IPXCP and IPX protocols.
+# To let pppd pass IPX packets comment this out --- you'll probably also
+# want to install ipxripd, and have the Internal IPX Network option enabled
+# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
+noipx
+
+# Exit once a connection has been made and terminated. This is the default,
+# unless the `persist' or `demand' option has been specified.
+#nopersist
+
+# Do not exit after a connection is terminated; instead try to reopen
+# the connection.
+#persist
+
+# Terminate after n consecutive failed connection attempts.
+# A value of 0 means no limit. The default value is 10.
+#maxfail <n>
+
+# Initiate the link only on demand, i.e. when data traffic is present.
+# With this option, the remote IP address must be specified by the user on
+# the command line or in an options file. Pppd will initially configure
+# the interface and enable it for IP traffic without connecting to the peer.
+# When traffic is available, pppd will connect to the peer and perform
+# negotiation, authentication, etc. When this is completed, pppd will
+# commence passing data packets (i.e., IP packets) across the link.
+#demand
+
+# Specifies that pppd should disconnect if the link is idle for <n> seconds.
+# The link is idle when no data packets (i.e. IP packets) are being sent or
+# received. Note: it is not advisable to use this option with the persist
+# option without the demand option. If the active-filter option is given,
+# data packets which are rejected by the specified activity filter also
+# count as the link being idle.
+#idle <n>
+
+# Specifies how many seconds to wait before re-initiating the link after
+# it terminates. This option only has any effect if the persist or demand
+# option is used. The holdoff period is not applied if the link was
+# terminated because it was idle.
+#holdoff <n>
+
+# Wait for up n milliseconds after the connect script finishes for a valid
+# PPP packet from the peer. At the end of this time, or when a valid PPP
+# packet is received from the peer, pppd will commence negotiation by
+# sending its first LCP packet. The default value is 1000 (1 second).
+# This wait period only applies if the connect or pty option is used.
+#connect-delay <n>
+
+# Packet filtering: for more information, see pppd(8)
+# Any packets matching the filter expression will be interpreted as link
+# activity, and will cause a "demand" connection to be activated, and reset
+# the idle connection timer. (idle option)
+# The filter expression is akin to that of tcpdump(1)
+#active-filter <filter-expression>
+
+# uncomment the line below this if you use PPPoE
+#plugin /usr/lib/pppd/plugins/pppoe.so
+
+# ---<End of File>---
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local
new file mode 100755
index 0000000..216ec8e
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local
@@ -0,0 +1,16 @@
+#!/bin/bash
+#
+# /etc/rc.local: Local multi-user startup script.
+#
+
+#install initial database
+pacman -S --noconfirm mythdb-initial 2>/dev/null
+
+# Set up automatically logged in user (larch live system only)
+if [ -f /.livesys/autologin ]; then
+ cp /.livesys/autologin /tmp/newuser
+fi
+
+# Restore saved sound volume, etc.
+#alsactl restore
+#install initial database
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.orig
new file mode 100755
index 0000000..47b24ef
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.orig
@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+# /etc/rc.local: Local multi-user startup script.
+#
+
+# Restore saved sound volume, etc.
+alsactl restore
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
new file mode 100755
index 0000000..2b5f735
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/rc.local.shutdown
@@ -0,0 +1,7 @@
+#!/bin/bash
+#
+# /etc/rc.local.shutdown: Local shutdown script.
+#
+
+# Save sound volume, etc.
+alsactl store
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
new file mode 100644
index 0000000..600bd9b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bash_profile
@@ -0,0 +1,3 @@
+. $HOME/.bashrc
+
+. /etc/X11/xinit/startx.custom
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bashrc
new file mode 100644
index 0000000..fcabce0
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.bashrc
@@ -0,0 +1,3 @@
+alias ls='ls --color=auto'
+PS1='[\u@\h \W]\$ '
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
new file mode 100644
index 0000000..c6febe5
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xinitrc
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+#
+# ~/.xinitrc
+#
+# Executed by startx (run your window manager from here)
+#
+
+# exec gnome-session
+# exec startkde
+# exec startxfce4
+# exec icewm
+# exec openbox
+# exec blackbox
+exec fluxbox
+# exec ratpoison
+# exec dwm
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xsession
new file mode 100755
index 0000000..a16dc0b
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/skel/.xsession
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+#
+# ~/.xsession
+#
+# Executed by xdm/gdm/kdm at login
+#
+
+/bin/bash --login -i ~/.xinitrc
+
diff --git a/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/slim.conf
new file mode 100644
index 0000000..35ed579
--- /dev/null
+++ b/build_tools/clarch/larch/profiles/i686-testing-REMOTE/rootoverlay/etc/slim.conf
@@ -0,0 +1,79 @@
+# Path, X server and arguments (if needed)
+# Note: -xauth $authfile is automatically appended
+default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
+default_xserver /usr/bin/X
+xserver_arguments -nolisten tcp vt07
+
+# Commands for halt, login, etc.
+halt_cmd /sbin/shutdown -h now
+reboot_cmd /sbin/shutdown -r now
+console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
+#suspend_cmd /usr/sbin/suspend
+
+# Full path to the xauth binary
+xauth_path /usr/bin/xauth
+
+# Xauth file for server
+authfile /var/run/slim.auth
+
+
+# Activate numlock when slim starts. Valid values: on|off
+# numlock on
+
+# Hide the mouse cursor (note: does not work with some WMs).
+# Valid values: true|false
+# hidecursor false
+
+# This command is executed after a succesful login.
+# you can place the %session and %theme variables
+# to handle launching of specific commands in .xinitrc
+# depending of chosen session and slim theme
+#
+# NOTE: if your system does not have bash you need
+# to adjust the command according to your preferred shell,
+# i.e. for freebsd use:
+# login_cmd exec /bin/sh - ~/.xinitrc %session
+login_cmd exec /bin/bash -login ~/.xinitrc %session
+
+# Commands executed when starting and exiting a session.
+# They can be used for registering a X11 session with
+# sessreg. You can use the %user variable
+#
+# sessionstart_cmd some command
+# sessionstop_cmd some command
+
+# Start in daemon mode. Valid values: yes | no
+# Note that this can overridden by the command line
+# option "-d"
+# daemon yes
+
+# Available sessions (first one is the default).
+# The current chosen session name is replaced in the login_cmd
+# above, so your login command can handle different sessions.
+# see the xinitrc.sample file shipped with slim sources
+sessions xfce4,icewm,wmaker,blackbox
+
+# Executed when pressing F11 (requires imagemagick)
+screenshot_cmd import -window root /slim.png
+
+# welcome message. Available variables: %host, %domain
+welcome_msg Welcome to %host
+
+# shutdown / reboot messages
+shutdown_msg The system is halting...
+reboot_msg The system is rebooting...
+
+# default user, leave blank or remove this line
+# for avoid pre-loading the username.
+#default_user simone
+
+# current theme, use comma separated list to specify a set to
+# randomly choose from
+current_theme dlarch
+
+# Lock file
+lockfile /var/lock/slim.lock
+
+# Log file
+logfile /var/log/slim.log
+