diff options
Diffstat (limited to 'build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay')
26 files changed, 0 insertions, 1047 deletions
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom deleted file mode 100644 index 8e3ec5e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/startx.custom +++ /dev/null @@ -1,22 +0,0 @@ -if grep -v nox /proc/cmdline &>/dev/null && \ - [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then - if grep i810 /proc/cmdline &>/dev/null; then - startx -- -config xorg.conf.i810 - else - startx - fi - - # Maybe there should be some code here to handle a failed startx? - - # The 'return' value is at /tmp/xlogout - # If there is nothing there, switch user to 'newuser' - # If there is also nothing there, login as root - # - if already root, fall through to terminal - - if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then - logout - elif [ ${UID} -ne 0 ]; then - echo "root" >/tmp/newuser - logout - fi -fi diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom deleted file mode 100644 index 5f04171..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xinit/xinitrc.custom +++ /dev/null @@ -1,4 +0,0 @@ -# Set the keymap -xkmap-set - -exec fluxbox diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf deleted file mode 100644 index 6d11b2e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf +++ /dev/null @@ -1,49 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - Identifier "Card0" - Driver "vesa" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810 deleted file mode 100644 index 9615569..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810 +++ /dev/null @@ -1,59 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "NoAccel" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "ColorKey" # <i> - #Option "CacheLines" # <i> - #Option "Dac6Bit" # [<bool>] - #Option "DRI" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ShowCache" # [<bool>] - #Option "XvMCSurfaces" # <i> - #Option "PageFlip" # [<bool>] - Option "DRI" "False" - #Option "AccelMethod" "exa" - #Option "MigrationHeuristic" "greedy" - #Option "ExaNoComposite" "False" - Identifier "Card0" - Driver "intel" -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2 deleted file mode 100644 index a295b38..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.i810.2 +++ /dev/null @@ -1,67 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - ### Available Driver options are:- - ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", - ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" - ### [arg]: arg optional - #Option "NoAccel" # [<bool>] - #Option "SWcursor" # [<bool>] - #Option "ColorKey" # <i> - #Option "CacheLines" # <i> - #Option "Dac6Bit" # [<bool>] - #Option "DRI" # [<bool>] - #Option "NoDDC" # [<bool>] - #Option "ShowCache" # [<bool>] - #Option "XvMCSurfaces" # <i> - #Option "PageFlip" # [<bool>] - Option "DRI" "False" - #Option "AccelMethod" "exa" - #Option "MigrationHeuristic" "greedy" - #Option "ExaNoComposite" "False" - Identifier "Card0" - Driver "intel" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa deleted file mode 100644 index 6d11b2e..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/X11/xorg.conf.vesa +++ /dev/null @@ -1,49 +0,0 @@ -Section "ServerLayout" - Identifier "X.org Configured" - Screen 0 "Screen0" 0 0 -EndSection - -Section "Device" - Identifier "Card0" - Driver "vesa" -EndSection - -Section "Monitor" - Identifier "Monitor0" - HorizSync 30.0 - 65.0 - VertRefresh 50.0 - 75.0 -EndSection - -Section "Screen" - Identifier "Screen0" - Device "Card0" - Monitor "Monitor0" - DefaultDepth 16 - SubSection "Display" - Viewport 0 0 - Depth 1 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 4 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 8 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 15 - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 16 - Modes "1024x768" "800x600" - EndSubSection - SubSection "Display" - Viewport 0 0 - Depth 24 - EndSubSection -EndSection - - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd deleted file mode 100644 index ab53c30..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/dhcpcd +++ /dev/null @@ -1,6 +0,0 @@ -# -# Arguments to be passed to the DHCP client daemon -# - -DHCPCD_ARGS="-t 10 -h $HOSTNAME" - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps deleted file mode 100644 index 64bb6b7..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.bootsteps +++ /dev/null @@ -1 +0,0 @@ -30 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf deleted file mode 100644 index ddd88f8..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.conf +++ /dev/null @@ -1,8 +0,0 @@ -# -# fbsplash.conf -# - -THEMES="linhes" -SPLASH_TTYS="1 2 3 4 5 6" - -#EOF diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps deleted file mode 100644 index 7f8f011..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/conf.d/fbsplash.shutdownsteps +++ /dev/null @@ -1 +0,0 @@ -7 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow deleted file mode 100644 index 19bc4d8..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/hosts.allow +++ /dev/null @@ -1,13 +0,0 @@ -# -# /etc/hosts.allow -# - -ALL: 127.0.0.1 - -# To allow ssh in from anywhere -sshd: ALL - -# To allow ssh in from local net (example) -#sshd: 192.168.178.0/255.255.255.0 - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab deleted file mode 100644 index 39003ed..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab +++ /dev/null @@ -1,43 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:3:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux -c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave deleted file mode 100644 index 2de483f..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/inittab.larchsave +++ /dev/null @@ -1,43 +0,0 @@ -# -# /etc/inittab -# - -# Runlevels: -# 0 Halt -# 1(S) Single-user -# 2 Not used -# 3 Multi-user -# 4 Not used -# 5 X11 -# 6 Reboot - -## Only one of the following two lines can be uncommented! -# Boot to console -id:5:initdefault: -# Boot to X11 -#id:5:initdefault: - -rc::sysinit:/etc/rc.sysinit -rs:S1:wait:/etc/rc.single -rm:2345:wait:/etc/rc.multi -rh:06:wait:/etc/rc.shutdown -su:S:wait:/sbin/sulogin -p - -# -8 options fixes umlauts problem on login -c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin -c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux -c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux -c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux -c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux -c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux -c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null - -ca::ctrlaltdel:/sbin/shutdown -t3 -r now - -# Example lines for starting a login manager -#x:5:respawn:/usr/bin/xdm -nodaemon -#x:5:respawn:/usr/sbin/gdm -nodaemon -#x:5:respawn:/opt/kde/bin/kdm -nodaemon -#x:5:respawn:/usr/bin/slim >& /dev/null - -# End of file diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown deleted file mode 100644 index d614d4b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/larch-shutdown +++ /dev/null @@ -1,47 +0,0 @@ -# Functions used by rc.shutdown -# Modified versions for larch live systems - -f_saveclock () -{ - : -} - -f_swapoff () -{ - ############################# Include session saving functions - # . /opt/larch-live/session-save/shutdown2 - # if [ -f /tmp/checkse ]; then - # . /tmp/checkse - #else - # checkse - # fi - - if [ -n "${saving}" ] && ! session_save; then - echo - echo "If you know what you are doing, you may be able to recover" - echo "something from this unpleasant situation." - echo - echo "You may use the command line to investigate further ..." - echo - echo "When finished please enter 'exit', the shutdown process will" - echo "then continue." - sh -i - fi - - ############################# - - stat_busy "Deactivating Swap" - /sbin/swapoff -a - stat_done -} - -f_remountro () -{ - if [ -n "${ejectdev}" ]; then - echo "Ejecting live CD" - eject ${ejectdev} - echo "sleeping for 6 seconds" - sleep 6 - - fi -} diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options deleted file mode 100644 index 237c390..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/ppp/options +++ /dev/null @@ -1,352 +0,0 @@ -# /etc/ppp/options -# -# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> -# Modified for Debian by alvar Bray <alvar@meiko.co.uk> -# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> -# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> -# -# To quickly see what options are active in this file, use this command: -# egrep -v '#|^ *$' /etc/ppp/options - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -# ms-dns 192.168.1.1 -# ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -# ms-wins 192.168.1.50 -# ms-wins 192.168.1.51 - -# Run the executable or shell command specified after pppd has -# terminated the link. This script could, for example, issue commands -# to the modem to cause it to hang up if hardware modem control signals -# were not available. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -asyncmap 0 - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -#auth - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Use software flow control (i.e. XON/XOFF) to control the flow of data -# on the serial port. -#xonxoff - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Don't use the modem control lines. -#local - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Don't show the passwords when logging the contents of PAP packets. -# This is the default. -hide-password - -# When logging the contents of PAP packets, this option causes pppd to -# show the password string in the log message. -#show-password - -# Use the modem control lines. On Ultrix, this option implies hardware -# flow control, as for the crtscts option. (This option is not fully -# implemented.) -modem - -# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd -# will ask the peer to send packets of no more than <n> bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Disables the default behaviour when no local IP address is specified, -# which is to determine (if possible) the local IP address from the -# hostname. With this option, the peer will have to supply the local IP -# address during IPCP negotiation (unless it specified explicitly on the -# command line or in an options file). -#noipdefault - -# Enables the "passive" option in the LCP. With this option, pppd will -# attempt to initiate a connection; if no reply is received from the -# peer, pppd will then just wait passively for a valid LCP packet from -# the peer (instead of exiting, as it does without this option). -#passive - -# With this option, pppd will not transmit LCP packets to initiate a -# connection until a valid LCP packet is received from the peer (as for -# the "passive" option with old versions of pppd). -#silent - -# Don't request or allow negotiation of any options for LCP and IPCP -# (use default values). -#-all - -# Disable Address/Control compression negotiation (use default, i.e. -# address/control field disabled). -#-ac - -# Disable asyncmap negotiation (use the default asyncmap, i.e. escape -# all control characters). -#-am - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -#-detach - -# Disable IP address negotiation (with this option, the remote IP -# address must be specified with an option on the command line or in -# an options file). -#-ip - -# Disable IPCP negotiation and IP communication. This option should -# only be required if the peer is buggy and gets confused by requests -# from pppd for IPCP negotiation. -#noip - -# Disable magic number negotiation. With this option, pppd cannot -# detect a looped-back line. -#-mn - -# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. -# 1500). -#-mru - -# Disable protocol field compression negotiation (use default, i.e. -# protocol field compression disabled). -#-pc - -# Require the peer to authenticate itself using PAP. -#+pap - -# Don't agree to authenticate using PAP. -#-pap - -# Require the peer to authenticate itself using CHAP [Cryptographic -# Handshake Authentication Protocol] authentication. -#+chap - -# Don't agree to authenticate using CHAP. -#-chap - -# Disable negotiation of Van Jacobson style IP header compression (use -# default, i.e. no compression). -#-vj - -# Increase debugging level (same as -d). If this option is given, pppd -# will log the contents of all control packets sent or received in a -# readable form. The packets are logged through syslog with facility -# daemon and level debug. This information can be directed to a file by -# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If -# pppd is compiled with extra debugging enabled, it will log messages -# using facility local2 instead of daemon). -#debug - -# Append the domain name <d> to the local host name for authentication -# purposes. For example, if gethostname() returns the name porsche, -# but the fully qualified domain name is porsche.Quotron.COM, you would -# use the domain option to set the domain name to Quotron.COM. -#domain <d> - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu <n> - -# Set the name of the local system for authentication purposes to <n>. -# This is a privileged option. With this option, pppd will use lines in the -# secrets files which have <n> as the second field when looking for a -# secret to use in authenticating the peer. In addition, unless overridden -# with the user option, <n> will be used as the name to send to the peer -# when authenticating the local system to the peer. (Note that pppd does -# not append the domain name to <n>.) -#name <n> - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -#usehostname - -# Set the assumed name of the remote system for authentication purposes -# to <n>. -#remotename <n> - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -# login - -# If this option is given, pppd will send an LCP echo-request frame to the -# peer every n seconds. Normally the peer should respond to the echo-request -# by sending an echo-reply. This option can be used with the -# lcp-echo-failure option to detect that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Set the LCP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#lcp-restart <n> - -# Set the maximum number of LCP terminate-request transmissions to <n> -# (default 3). -#lcp-max-terminate <n> - -# Set the maximum number of LCP configure-request transmissions to <n> -# (default 10). -#lcp-max-configure <n> - -# Set the maximum number of LCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#lcp-max-failure <n> - -# Set the IPCP restart interval (retransmission timeout) to <n> -# seconds (default 3). -#ipcp-restart <n> - -# Set the maximum number of IPCP terminate-request transmissions to <n> -# (default 3). -#ipcp-max-terminate <n> - -# Set the maximum number of IPCP configure-request transmissions to <n> -# (default 10). -#ipcp-max-configure <n> - -# Set the maximum number of IPCP configure-NAKs returned before starting -# to send configure-Rejects instead to <n> (default 10). -#ipcp-max-failure <n> - -# Set the PAP restart interval (retransmission timeout) to <n> seconds -# (default 3). -#pap-restart <n> - -# Set the maximum number of PAP authenticate-request transmissions to -# <n> (default 10). -#pap-max-authreq <n> - -# Set the maximum time that pppd will wait for the peer to authenticate -# itself with PAP to <n> seconds (0 means no limit). -#pap-timeout <n> - -# Set the CHAP restart interval (retransmission timeout for -# challenges) to <n> seconds (default 3). -#chap-restart <n> - -# Set the maximum number of CHAP challenge transmissions to <n> -# (default 10). -#chap-max-challenge - -# If this option is given, pppd will rechallenge the peer every <n> -# seconds. -#chap-interval <n> - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Disable the IPXCP and IPX protocols. -# To let pppd pass IPX packets comment this out --- you'll probably also -# want to install ipxripd, and have the Internal IPX Network option enabled -# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. -noipx - -# Exit once a connection has been made and terminated. This is the default, -# unless the `persist' or `demand' option has been specified. -#nopersist - -# Do not exit after a connection is terminated; instead try to reopen -# the connection. -#persist - -# Terminate after n consecutive failed connection attempts. -# A value of 0 means no limit. The default value is 10. -#maxfail <n> - -# Initiate the link only on demand, i.e. when data traffic is present. -# With this option, the remote IP address must be specified by the user on -# the command line or in an options file. Pppd will initially configure -# the interface and enable it for IP traffic without connecting to the peer. -# When traffic is available, pppd will connect to the peer and perform -# negotiation, authentication, etc. When this is completed, pppd will -# commence passing data packets (i.e., IP packets) across the link. -#demand - -# Specifies that pppd should disconnect if the link is idle for <n> seconds. -# The link is idle when no data packets (i.e. IP packets) are being sent or -# received. Note: it is not advisable to use this option with the persist -# option without the demand option. If the active-filter option is given, -# data packets which are rejected by the specified activity filter also -# count as the link being idle. -#idle <n> - -# Specifies how many seconds to wait before re-initiating the link after -# it terminates. This option only has any effect if the persist or demand -# option is used. The holdoff period is not applied if the link was -# terminated because it was idle. -#holdoff <n> - -# Wait for up n milliseconds after the connect script finishes for a valid -# PPP packet from the peer. At the end of this time, or when a valid PPP -# packet is received from the peer, pppd will commence negotiation by -# sending its first LCP packet. The default value is 1000 (1 second). -# This wait period only applies if the connect or pty option is used. -#connect-delay <n> - -# Packet filtering: for more information, see pppd(8) -# Any packets matching the filter expression will be interpreted as link -# activity, and will cause a "demand" connection to be activated, and reset -# the idle connection timer. (idle option) -# The filter expression is akin to that of tcpdump(1) -#active-filter <filter-expression> - -# uncomment the line below this if you use PPPoE -#plugin /usr/lib/pppd/plugins/pppoe.so - -# ---<End of File>--- diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local deleted file mode 100755 index 2d488a2..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local +++ /dev/null @@ -1,93 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local: Local multi-user startup script. -# -. /etc/rc.conf -. /etc/rc.d/functions -. /etc/profile -. ${MV_ROOT}/bin/install_functions.sh - -function mysql_check { - mysql -e "show databases;" 2>/dev/null >/dev/null - return $? -} - -function mythconverg_check { - mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null - return $? -} - -function install_db { - pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null - pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null -} - - - - -#check to see if mysql is running -stat_busy "Checking Mysql" -ATTEMPT=0 -mysql_check && printhl " Installing the initial database" &&install_db -mythconverg_check -status=$? -while [ ! $status = 0 ] -do - ((ATTEMPT=ATTEMPT+1)) - /etc/rc.d/mysqld stop - sleep 2 - /etc/rc.d/mysqld start - mysqlstatus=$? - if [ $mysqlstatus = 0 ] - then - mysql_check && install_db - mythconverg_check - status=$? - fi - if [ $ATTEMPT = 20 ] - then - printhl " Could not start mysql or install mythconverg within 20 attempts" - printhl " Aborting install" - exit 20 - fi -done -stat_done - -#check network parms -stat_busy "Checking network" -init_network -stat_done - -stat_busy "Probing network" -request_dhcp & -stat_done - -#save some cmdline options -stat_busy "Parsing command line" -parse_cmdline_2_db -bootsplash_setup -stat_done - -#search for remote -stat_busy "Checking for remote" -init_remote -stat_done -printhl "Finished" - - -echo $CMDLINE | grep -qi NoX -if [ $? = 0 ] -then - echo "" - printhl "No auto X option found" - # /usr/bin/chvt 2 -else - /root/startx & -fi - - -# Set up automatically logged in user -if [ -f /.livesys/autologin ]; then - cp /.livesys/autologin /tmp/newuser -fi - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig deleted file mode 100755 index 47b24ef..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.orig +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local: Local multi-user startup script. -# - -# Restore saved sound volume, etc. -alsactl restore diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown deleted file mode 100755 index 2b5f735..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/rc.local.shutdown +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/bash -# -# /etc/rc.local.shutdown: Local shutdown script. -# - -# Save sound volume, etc. -alsactl store diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile deleted file mode 100644 index 600bd9b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bash_profile +++ /dev/null @@ -1,3 +0,0 @@ -. $HOME/.bashrc - -. /etc/X11/xinit/startx.custom diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc deleted file mode 100644 index fcabce0..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.bashrc +++ /dev/null @@ -1,3 +0,0 @@ -alias ls='ls --color=auto' -PS1='[\u@\h \W]\$ ' - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc deleted file mode 100644 index c6febe5..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xinitrc +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh - -# -# ~/.xinitrc -# -# Executed by startx (run your window manager from here) -# - -# exec gnome-session -# exec startkde -# exec startxfce4 -# exec icewm -# exec openbox -# exec blackbox -exec fluxbox -# exec ratpoison -# exec dwm diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession deleted file mode 100755 index a16dc0b..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/skel/.xsession +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/sh - -# -# ~/.xsession -# -# Executed by xdm/gdm/kdm at login -# - -/bin/bash --login -i ~/.xinitrc - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf deleted file mode 100644 index 35ed579..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/etc/slim.conf +++ /dev/null @@ -1,79 +0,0 @@ -# Path, X server and arguments (if needed) -# Note: -xauth $authfile is automatically appended -default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin -default_xserver /usr/bin/X -xserver_arguments -nolisten tcp vt07 - -# Commands for halt, login, etc. -halt_cmd /sbin/shutdown -h now -reboot_cmd /sbin/shutdown -r now -console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login" -#suspend_cmd /usr/sbin/suspend - -# Full path to the xauth binary -xauth_path /usr/bin/xauth - -# Xauth file for server -authfile /var/run/slim.auth - - -# Activate numlock when slim starts. Valid values: on|off -# numlock on - -# Hide the mouse cursor (note: does not work with some WMs). -# Valid values: true|false -# hidecursor false - -# This command is executed after a succesful login. -# you can place the %session and %theme variables -# to handle launching of specific commands in .xinitrc -# depending of chosen session and slim theme -# -# NOTE: if your system does not have bash you need -# to adjust the command according to your preferred shell, -# i.e. for freebsd use: -# login_cmd exec /bin/sh - ~/.xinitrc %session -login_cmd exec /bin/bash -login ~/.xinitrc %session - -# Commands executed when starting and exiting a session. -# They can be used for registering a X11 session with -# sessreg. You can use the %user variable -# -# sessionstart_cmd some command -# sessionstop_cmd some command - -# Start in daemon mode. Valid values: yes | no -# Note that this can overridden by the command line -# option "-d" -# daemon yes - -# Available sessions (first one is the default). -# The current chosen session name is replaced in the login_cmd -# above, so your login command can handle different sessions. -# see the xinitrc.sample file shipped with slim sources -sessions xfce4,icewm,wmaker,blackbox - -# Executed when pressing F11 (requires imagemagick) -screenshot_cmd import -window root /slim.png - -# welcome message. Available variables: %host, %domain -welcome_msg Welcome to %host - -# shutdown / reboot messages -shutdown_msg The system is halting... -reboot_msg The system is rebooting... - -# default user, leave blank or remove this line -# for avoid pre-loading the username. -#default_user simone - -# current theme, use comma separated list to specify a set to -# randomly choose from -current_theme dlarch - -# Lock file -lockfile /var/lock/slim.lock - -# Log file -logfile /var/log/slim.log - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/.fluxbox/apps deleted file mode 100644 index 68fae0a..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/.fluxbox/apps +++ /dev/null @@ -1,2 +0,0 @@ -[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} - diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/LinHES-install.sh b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/LinHES-install.sh deleted file mode 100755 index 6acd24a..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/LinHES-install.sh +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/bash -#redirect stderr to stdout, then rediret stdout to file -. /etc/profile -exec 2>&1 -exec > /tmp/mythvantage_install.log -#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 -#keylaunch & -#/usr/bin/tilda & -#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & -export MALLOC_CHECK_=0 -xset s off -xset -dpms -xhost + - -CMDLINE=$(cat /proc/cmdline) -echo $CMDLINE |grep -q nfsroot -NFSROOT=$? -echo $CMDLINE |grep -q clean_upgrade -if [ $? = 0 ] -then - export CLEAN_UPGRADE=YES -else - export CLEAN_UPGRADE=NO -fi -MythVantage -r - -if [ x$NFSROOT = x1 ] -then - unbuffer MythVantage & -else - NETBOOT=YES MythVantage & -fi - -exec fluxbox > /var/log/fluxbox.log 2>&1 diff --git a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/startx b/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/startx deleted file mode 100755 index 9274703..0000000 --- a/build_tools/clarch/larch/profiles/i686-testing-local-httpd/rootoverlay/root/startx +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/bash -. /etc/profile - -export USER=root -export HOME=/root - -CMDLINE=$(cat /proc/cmdline) -TEMPVAR=${CMDLINE#*ip=} -IP=${TEMPVAR%% *} -echo $CMDLINE |grep -q vnc -USEVNC=$? - -if [ x$USEVNC = x1 ] -then - $MV_ROOT/bin/xconfig.sh 2>/dev/null - cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install - startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log - else - #VNC - pacman -Sf --noconfirm tightvnc - cd /root - mkdir .vnc - echo mythvantage |vncpasswd -f > /root/.vnc/passwd - chmod 500 /root/.vnc/passwd - rm /root/.vnc/xstartup - ln -s /root/LinHES-install.sh /root/.vnc/xstartup - vncserver -fi |