summaryrefslogtreecommitdiffstats
path: root/build_tools/clarch/larch/profiles/i686-testing-local
diff options
context:
space:
mode:
Diffstat (limited to 'build_tools/clarch/larch/profiles/i686-testing-local')
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/addedpacks225
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cache_packs59
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg38
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg57
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg37
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpgbin44071 -> 0 bytes
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch063
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/locale.gen5
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf55
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel754
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps2
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc19
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/pacman.conf62
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post-process.sh17
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps4
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init35
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu81
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig65
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.pngbin119287 -> 0 bytes
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc18
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession10
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow8
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny6
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst60
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh15
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf112
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown104
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh8
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rcconfx20
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom22
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom4
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf49
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i81059
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.267
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa49
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd6
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf8
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps1
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow13
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab43
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave43
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown47
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options352
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local93
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig7
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown7
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc3
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc17
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession10
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf79
-rw-r--r--build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps2
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh34
-rwxr-xr-xbuild_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx28
61 files changed, 0 insertions, 2296 deletions
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks b/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks
deleted file mode 100644
index d4da97c..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/addedpacks
+++ /dev/null
@@ -1,225 +0,0 @@
-# These are needed to build a live CD
-linhes-live
-squashfs-tools
-lzop
-
-syslinux
-
-# You need a kernel.
-#kernel26 is now in 'base'
-aufs2
-kernel26-headers
-
-# To eject a cd
-eject
-
-# Useful for use as installer, etc.
-#ntfsprogs
-#parted
-
-#ddcxinfo-knoppix
-#hwd
-
-sudo
-
-lsof
-cdrkit
-dvd+rw-tools
-
-
-# generally useful tools which don't require X
-#mtools is required by syslinux
-openssh
-dosfstools
-alsa-lib
-alsa-oss
-alsa-utils
-cdparanoia
-cdrdao
-unzip
-
-
-# Xorg packages
-xorg-server
-xorg-xkb-utils
-xorg-xauth
-xorg-server-utils
-xorg-xinit
-xorg-input-drivers
-xterm
-xorg-fonts-100dpi
-xorg-fonts-75dpi
-xorg-res-utils
-ttf-ms-fonts
-
-#xorg-video-drivers
-xf86-video-amd
-xf86-video-apm
-xf86-video-ark
-xf86-video-ati
-xf86-video-chips
-xf86-video-cirrus
-xf86-video-dummy
-xf86-video-fbdev
-xf86-video-glint
-xf86-video-i128
-xf86-video-i740
-#xf86-video-i810
-#xf86-video-imstt
-xf86-video-intel
-xf86-video-mga
-xf86-video-neomagic
-xf86-video-nv
-xf86-video-openchrome
-xf86-video-radeonhd
-xf86-video-rendition
-xf86-video-s3
-xf86-video-s3virge
-xf86-video-savage
-xf86-video-siliconmotion
-xf86-video-sis
-xf86-video-sisusb
-#xf86-video-tdfx
-xf86-video-trident
-xf86-video-tseng
-#unichrome is busted and causes X to segfault
-#xf86-video-unichrome
-xf86-video-v4l
-xf86-video-vesa
-#vga should not be installed, vesa can handle when other drivers fail
-#xf86-video-vga
-#xf86-video-via
-xf86-video-vmware
-xf86-video-voodoo
-
-# X apps
-#luser
-#localed
-unclutter
-
-#xkmap
-
-#gparted
-#larchin
-
-#mythtv
-mythtv
-mythtv-contrib
-mytharchive
-mythbrowser
-#mythcontrols
-#mythflix
-mythgallery
-mythgame
-mythmusic
-#mythphone
-myththemes
-mythweather
-mythvideo
-mythsmolt
-#morethemes
-linhes-theme
-linhes-scripts
-nuvexport
-lirc
-lirc-utils
-mysql
-xmltv
-esound
-
-#Window Manager
-fluxbox
-feh
-
-#Other
-dbus
-hal
-hal-info
-fftw2
-libcdaudio
-iptables
-pkgconfig
-taglib
-portmap
-ivtv-utils
-dvb-firmware
-dbus-python
-
-#MythVantage Installer deps
-bc
-mysql-python
-expect
-curl
-dnsutils
-avahi
-
-#Wireless
-b43-fwcutter
-#ipw2100-fw
-#ipw2200-fw
-#ipw3945
-#ipw3945-ucode
-#ipw3945d
-madwifi
-madwifi-utils
-ndiswrapper
-ndiswrapper-utils
-netcfg
-tiacx
-tiacx-firmware
-wireless_tools
-#wlan-ng26
-#wlan-ng26-utils
-zd1211-firmware
-hdhomerun
-#----
-LinHES-config
-LinHES-system
-linhes-sounds
-etcnet
-runit
-runit-scripts
-media_dirs
-
-#---
-tweaker
-ethtool
-nfs-utils
-netkit-telnet
-ntp
-syslog-ng
-ppp
-mingetty
-setserial
-acpid
-fbsplash
-linhes-splash
-nvram-wakup
-#tatir
-pvr150-firmware
-wol
-mjpegtools
-perl-net-upnp
-aumix
-tablet-encode
-ntfs-3g
-joyutils
-ffmpeg-svn
-myth2ipod
-myt2xvid3
-mediaserv
-
-#---Firewire
-libraw1394
-libavc1394
-# wrapper for mplayer
-mplayer-wrapper
-
-# in-place commercial remover (for user job)
-# moved to linhes-scripts
-#removecommercials
-
-#Modules for Atheros base NICs
-#atl1e
-
-linux-firmware
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs b/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs
deleted file mode 100644
index 747ab46..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cache_packs
+++ /dev/null
@@ -1,59 +0,0 @@
-mythdb-initial
-nvidia
-nvidia-utils
-vdpauinfo
-nvidia-96xx
-nvidia-96xx-utils
-#vdpinfo-96xx
-lighttpd
-local-website
-mythweb
-nfs-utils
-samba
-mplayer
-xine-ui
-lcdproc
-mythappletrailers
-mythstream
-oss
-xscreensaver
-tightvnc
-
-#added from error log
-mysql
-mythnews
-pycairo
-pygobject
-python-numeric
-pygtk
-fam
-sqlite3
-xe
-romdb
-gconf
-gnome-keyring
-gnome-mime-data
-gnome-python
-gnome-python-extras
-gnome-vfs
-hunspell
-libbonobo
-libbonoboui
-libgnome
-libgnomecanvas
-libgnomeui
-libidl2
-miro
-mozilla-common
-nspr
-nss
-orbit2
-polkit
-pyorbit
-pyrex
-startup-notification
-xulrunner
-mythmovies
-myth2ipod
-myt2xvid3
-#mediaserv
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg
deleted file mode 100644
index 5ef732d..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/debugsub.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-default vesamenu.c32
-prompt 0
-#timeout 300
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-MENU ROWS 4
-MENU CMDLINEROW 22
-#MENU TIMEOUTROW 23
-MENU TABMSGROW 22
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-
-label linux-nox
-MENU LABEL Boot to console (without X windowing)
-kernel vmlinuz
-append initrd=larch.img NoX
-
-label linux-c2r
-MENU LABEL LinHES: copy-to-ram (also activates swap)
-kernel vmlinuz
-append initrd=larch.img c2r
-
-label linux-swap
-MENU LABEL LinHES: Use swap
-kernel vmlinuz
-append initrd=larch.img swap
-
-label memtest
-MENU LABEL Memory tester
-kernel memtest
-
-label goback
-MENU LABEL Back
-kernel vesamenu.c32
-append menu isolinux.cfg \ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg
deleted file mode 100644
index c041eb2..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/hardsub.cfg
+++ /dev/null
@@ -1,57 +0,0 @@
-default vesamenu.c32
-prompt 0
-#timeout 300
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-MENU ROWS 4
-MENU CMDLINEROW 22
-MENU TABMSGROW 22
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-label atomic
-MENU LABEL LinHES on Atomic Ant!
-kernel vmlinuz
-append initrd=larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart,intel_agp
-
-#label linux-i810
-#MENU LABEL with Intel i810 driver (DRI disabled)
-#kernel vmlinuz
-#append initrd=larch.img i810
-
-label linux-vesa
-MENU LABEL Force use of vesa driver
-kernel vmlinuz
-append initrd=larch.img forceXvesa
-
-lable skipTweaker
-MENU LABEL LinHES no splashscren no tweaker.
-kernel vmlinuz
-append initrd=larch.img no_meth
-
-label dragon
-MENU LABEL Dragon Version 1
-kernel vmlinuz
-append initrd=larch.img type=dragon vga=0x314 quiet splash=silent,theme:linhes console=tty1
-
-label dragon2
-MENU LABEL Dragon Version 2
-kernel vmlinuz
-append initrd=larch.img type=dragon2 vga=0x314 quiet splash=silent,theme:linhes console=tty1
-
-label ausdragon
-MENU LABEL Australian Dragon
-kernel vmlinuz
-append initrd=larch.img type=ausdragon vga=0x314 quiet splash=silent,theme:linhes console=tty1
-
-label 8400
-MENU LABEL For the Nvidia 8400 chipset.
-kernel vmlinuz
-append initrd=larch.img vga=792 quiet splash=silent,theme:linhes console=tty1 disablemodules=agpart
-
-label goback
-MENU LABEL Back
-kernel vesamenu.c32
-append menu isolinux.cfg
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg
deleted file mode 100644
index 646b173..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-default vesamenu.c32
-prompt 0
-timeout 300
-
-MENU BACKGROUND vbg.jpg
-MENU COLOR border 31;40 #90ffff00 #00000000 std
-MENU COLOR sel 31;47 #00000000 #FFFFFF15 al
-MENU ROWS 4
-MENU CMDLINEROW 22
-MENU TIMEOUTROW 23
-MENU TABMSGROW 22
-
-MENU TITLE LinHES: The Linux Home Entertainment System
-
-label linux
-MENU LABEL LinHES (default).
-kernel vmlinuz
-append initrd=larch.img vga=0x314 quiet splash=silent,theme:linhes console=tty1
-
-label linux-nosplash
-MENU LABEL LinHES without splash screen.
-kernel vmlinuz
-append initrd=larch.img
-
-label special
-MENU LABEL Special Hardware
-kernel vesamenu.c32
-append hardsub.cfg
-
-label debug
-MENU LABEL Debug options
-kernel vesamenu.c32
-append debugsub.cfg
-
-label local
-menu label Boot from ^local drive
-localboot 0xffff
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg
deleted file mode 100644
index 07d31a6..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/isolinux/vbg.jpg
+++ /dev/null
Binary files differ
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc
deleted file mode 100644
index dd95b26..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/actions.rc
+++ /dev/null
@@ -1,3 +0,0 @@
-type=0
-orientation=1
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin
deleted file mode 100644
index 93ca142..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/autologin
+++ /dev/null
@@ -1 +0,0 @@
-root \ No newline at end of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0 b/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0
deleted file mode 100644
index c80b7c2..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/cd-root/larch/copy/larch0
+++ /dev/null
@@ -1,63 +0,0 @@
-# This is a script 'sourced' from the installation script larch-tidy.
-# Its purpose is to remove custom live-only stuff from a just-installed
-# system.
-# ${INSTALL} is the path to the installed system root directory.
-
-rm "${INSTALL}/root/Desktop/Install Arch Linux.desktop"
-
-if [ -f ${INSTALL}/etc/rc.local.orig ]; then
- mv ${INSTALL}/etc/rc.local.orig ${INSTALL}/etc/rc.local
-fi
-if [ -f ${INSTALL}/etc/rc.local.shutdown.orig ]; then
- mv ${INSTALL}/etc/rc.local.shutdown.orig ${INSTALL}/etc/rc.local.shutdown
-fi
-
-# slim is currently started in inittab
-#sed -i '/^DAEMONS=/ s|!slim|@slim|' ${INSTALL}/etc/rc.conf
-
-# Copy xorg.conf.i810 to target xorg.conf if necessary
-if ! [ -f /etc/X11/xorg.conf ]; then
- if grep i810 /proc/cmdline &>/dev/null; then
- cp /etc/X11/xorg.conf.i810 ${INSTALL}/etc/X11/xorg.conf
- fi
-fi
-
-#***************************************************#
-# Replace uses of larchquit in xfce panels and menu.#
-#***************************************************#
-### Unfortunately this isn't very simple. If anyone has a better way of
-### providing different Quit actions in the live version and the version
-### installed to disk from it, please let me know!
-### Maybe it would be better just to provide a special live quit desktop
-### icon which can be removed on installation, like the installation icon.
-
-defaultquit='<builtin name="Quit" cmd="Quit" icon="gnome-logout"/>'
-
-replacequit ()
-{
- for f in ${INSTALL}$1/.config/xfce4/panel/*; do
- if grep "^Exec=larchquit" ${f}; then
- n=$( echo ${f} | sed "s|^.*-\([0-9]\+\).*|\1|" )
- cp /.livesys/actions.rc \
- ${INSTALL}$1/.config/xfce4/panel/actions-${n}.rc
- rm ${f}
-
- sed -i "s|=\"launcher\" id=\"${n}\"|=\"actions\" id=\"${n}\"|" \
- ${INSTALL}$1/.config/xfce4/panel/panels.xml
- fi
- done
-
- if [ -f ${INSTALL}$1/.bash_profile ]; then
- sed -i "s|<app .*cmd=\"larchquit.*/>|${defaultquit}|" \
- ${INSTALL}$1/.config/xfce4/desktop/menu.xml
-
- cp /.livesys/xfce4-session.rc ${INSTALL}$1/.config/xfce4-session
- cp /.livesys/bash_profile ${INSTALL}$1/.bash_profile
- fi
-}
-
-for hd in $( cat ${INSTALL}/etc/passwd | cut -d':' -f6 | grep '^/home/' ) \
- /root /etc/skel; do
- replacequit ${hd} &>/dev/null
-done
-#***************************************************#
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh b/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh
deleted file mode 100755
index 6a4fdee..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/create_overlay.sh
+++ /dev/null
@@ -1 +0,0 @@
-../../run/xpack -r overlay overlay.xpk
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen b/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen
deleted file mode 100644
index 760ec23..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/locale.gen
+++ /dev/null
@@ -1,5 +0,0 @@
-# locales for larch (/etc/locale.gen)
-
-en_US ISO-8859-1
-en_US.UTF-8 UTF-8
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf b/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf
deleted file mode 100644
index 27fe40f..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf
+++ /dev/null
@@ -1,55 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish. This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-#BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway. This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-# FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'modload' may be used in place of 'udev', but is not recommended
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-# This setup specifies all modules in the MODULES setting above.
-# No raid, lvm, or encrypted root is needed.
-# HOOKS="base"
-#
-# This setup will autodetect all modules for your system and should
-# work as a sane default
-# HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-# This setup will generate a 'full' image which supports most systems.
-# No autodetection is done.
-# HOOKS="base udev ide scsi sata usb filesystems"
-#
-# This setup assembles an ide raid array with an encrypted root FS.
-# Note: See 'mkinitcpio -H raid' for more information on raid devices.
-# HOOKS="base udev ide filesystems raid encrypt"
-#
-# This setup loads an LVM volume group on a usb device.
-# HOOKS="base udev usb filesystems lvm"
-#HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3 fbsplash"
-HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3"
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7 b/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7
deleted file mode 100644
index 7279f45..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/mkinitcpio.conf.prel7
+++ /dev/null
@@ -1,54 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES="piix ide_disk reiserfs"
-MODULES=""
-
-# BINARIES
-# This setting includes, into the CPIO image, and additional
-# binaries a given user may wish. This is run first, so may
-# be used to override the actual binaries used in a given hook.
-# (Existing files are NOT overwritten is already added)
-# BINARIES are dependancy parsed, so you may safely ignore libraries
-#BINARIES=""
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in anyway. This is useful for config files.
-# Some users may wish to include modprobe.conf for custom module options,
-# like so:
-# FILES="/etc/modprobe.conf"
-FILES=""
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'modload' may be used in place of 'udev', but is not recommended
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-# This setup specifies all modules in the MODULES setting above.
-# No raid, lvm, or encrypted root is needed.
-# HOOKS="base"
-#
-# This setup will autodetect all modules for your system and should
-# work as a sane default
-# HOOKS="base udev autodetect ide scsi sata filesystems"
-#
-# This setup will generate a 'full' image which supports most systems.
-# No autodetection is done.
-# HOOKS="base udev ide scsi sata usb filesystems"
-#
-# This setup assembles an ide raid array with an encrypted root FS.
-# Note: See 'mkinitcpio -H raid' for more information on raid devices.
-# HOOKS="base udev ide filesystems raid encrypt"
-#
-# This setup loads an LVM volume group on a usb device.
-# HOOKS="base udev usb filesystems lvm"
-HOOKS="base udev pata scsi sata usb larch1 larch2_aufs larch3 fbsplash"
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 5a2b8d6..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {sudo /usr/MythVantage/bin/mythvantage}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc
deleted file mode 100755
index d988c98..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/overlay/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh
-. /etc/profile
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-# exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf b/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf
deleted file mode 100755
index 617c4d1..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/pacman.conf
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# /etc/pacman.conf
-# from pacman.conf MV
-# NOTE: If you find a mirror that is geographically close to you, please
-# move it to the top of the server list, so pacman will choose it
-# first.
-#
-# To re-sort your mirror lists by ping/traceroute results, use the
-# /usr/bin/sortmirrors script. It requires the "netselect" package.
-#
-
-# See the pacman manpage for option directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-LogFile = /var/log/pacman.log
-NoUpgrade = etc/passwd etc/group etc/shadow etc/sudoers
-NoUpgrade = etc/fstab etc/raidtab etc/ld.so.conf
-NoUpgrade = etc/rc.conf etc/rc.local
-NoUpgrade = etc/modprobe.conf etc/modules.conf
-NoUpgrade = etc/lilo.conf boot/grub/menu.lst
-NoUpgrade = data/srv/hobbit/etc/bb-hosts
-NoUpgrade = etc/func/minion.conf
-
-HoldPkg = pacman glibc
-CacheDir = /data/var/cache/pacman/pkg
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-
-#
-# REPOSITORIES
-# - can be defined here or included from another file
-# - pacman will search repositories in the order defined here.
-# - local/custom mirrors can be added here or in separate files
-#
-[core-testing]
-Server = file:///data/pkg_repo/i686/core-testing
-
-[extra-testing]
-Server = file:///data/pkg_repo/i686/extra-testing
-
-
-
-########################ARCH DEFAULTS#############
-#[core]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[extra]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-#[community]
-# Add your preferred servers here, they will be used first
-#Include = /etc/pacman.d/mirrorlist
-
-# Unstable is disabled by default. To enable, uncomment the following
-# two lines. You can add preferred servers immediately after the header,
-# and they will be used before the default mirrors.
-#[unstable]
-#Include = /etc/pacman.d/mirrorlist
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh b/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh
deleted file mode 100755
index 883d9ad..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post-process.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-echo $@
-INSTDIR=$1
-PROFILE=$2
-
-#everything below this point is specific to MythVantage
-cp -rp $PROFILE/post_process $INSTDIR/.post_process
-chroot $INSTDIR .post_process/modify_chroot.sh
-rm -rf $INSTDIR/.post_process
-
-#find the size of the install.
-#This is used to calculate progress on the install
-tsize=`du -sm $INSTDIR/ | cut -f1`
-echo "TOTALSIZE=$tsize" > $INSTDIR/root/.install_size
-upsize=`du -sm --exclude data $INSTDIR/ |cut -f1`
-echo "UPGRADESIZE=$upsize" >> $INSTDIR/root/.install_size
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile
deleted file mode 100644
index c49349b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bash_profile
+++ /dev/null
@@ -1 +0,0 @@
-. $HOME/.bashrc
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps
deleted file mode 100644
index 994daf7..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/apps
+++ /dev/null
@@ -1,4 +0,0 @@
-#Uncomment below if you are using firewire
-#[startup] {/usr/bin/plugctl -n 0 "oPCR[0].n_p2pconnections=1"}
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-[startup] {/usr/LH/bin/LinHES-run}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init
deleted file mode 100644
index 9791a7f..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/init
+++ /dev/null
@@ -1,35 +0,0 @@
-session.screen0.slit.placement: BottomRight
-session.screen0.slit.direction: Vertical
-session.screen0.slit.onTop: False
-session.screen0.slit.autoHide: True
-session.screen0.tab.placement: Top
-session.screen0.toolbar.onTop: False
-session.screen0.toolbar.visible: False
-session.screen0.toolbar.autoHide: False
-session.screen0.toolbar.placement: BottomCenter
-session.screen0.toolbar.widthPercent: 66
-session.screen0.workspaceNames: one,two,three,four
-session.screen0.strftimeFormat: %k:%M
-session.screen0.focusNewWindows: True
-session.screen0.focusModel: ClickToFocus
-session.screen0.fullMaximization: False
-session.screen0.edgeSnapThreshold: 0
-session.screen0.rowPlacementDirection: LeftToRight
-session.screen0.workspaces: 4
-session.screen0.focusLastWindow: True
-session.screen0.colPlacementDirection: TopToBottom
-session.screen0.windowPlacement: RowSmartPlacement
-session.screen0.tab.width: 64
-session.screen0.tab.height: 16
-session.screen0.showwindowposition: true
-session.opaqueMove: False
-session.autoRaiseDelay: 250
-session.menuFile: ~/.fluxbox/menu
-session.cacheLife: 5
-session.styleFile: /usr/share/fluxbox/styles/Artwiz
-session.keyFile: ~/.fluxbox/keys
-session.colorsPerChannel: 4
-session.doubleClickInterval: 250
-session.cacheMax: 200
-session.imageDither: True
-session.configVersion: 1
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu
deleted file mode 100644
index 858090e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menu
+++ /dev/null
@@ -1,81 +0,0 @@
-# Generated by fluxbox-generate_menu
-#
-# If you read this it means you want to edit this file manually, so here
-# are some useful tips:
-#
-# - You can add your own menu-entries to ~/.fluxbox/usermenu
-#
-# - If you miss apps please let me know and I will add them for the next
-# release.
-#
-# - The -r option prevents removing of empty menu entries and lines which
-# makes things much more readable.
-#
-# - To prevent any other app from overwriting your menu
-# you can change the menu name in .fluxbox/init to:
-# session.menuFile: /home/mythtv/.fluxbox/my-menu
-[begin] (Fluxbox)
-[encoding] {UTF-8}
- [exec] (xterm) {xterm}
- [exec] () {} execname is NULL; cannot lookup
- [exec] (Run) {fbrun }
-[submenu] (Terminals)
- [exec] (xterm) {xterm}
-[end]
-[submenu] (Editors)
- [exec] (xedit) {xedit}
- [exec] (nano) {xterm -e nano}
- [exec] (vi) {xterm -e vi}
-[end]
-[submenu] (Multimedia)
-[submenu] (Audio)
- [exec] (alsamixer) {xterm -e alsamixer}
-[end]
-[submenu] (Video)
- [exec] (gmplayer) {gmplayer}
-[end]
-[submenu] (X-utils)
- [exec] (xfontsel) {xfontsel}
- [exec] (xman) {xman}
- [exec] (xload) {xload}
- [exec] (xbiff) {xbiff}
- [exec] (xclock) {xclock}
- [exec] (xmag) {xmag}
- [exec] (Reload .Xdefaults) {xrdb -load /home/mythtv/.Xdefaults}
-[end]
-[end]
-[submenu] (Office)
- [exec] (xclock) {xclock}
- [exec] (xcalc) {xcalc}
-[end]
-[submenu] (Games)
- [exec] (xeyes) {xeyes}
-[end]
-[submenu] (System Tools)
- [exec] (top) {xterm -e top}
-[end]
-[submenu] (fluxbox menu)
- [config] (Configure)
-[submenu] (System Styles) {Choose a style...}
- [stylesdir] (/usr/share/fluxbox/styles)
-[end]
-[submenu] (User Styles) {Choose a style...}
- [stylesdir] (~/.fluxbox/styles)
-[end]
- [workspaces] (Workspace List)
-[submenu] (Tools)
- [exec] (Window name) {xprop WM_CLASS|cut -d \" -f 2|xmessage -file - -center}
- [exec] (Screenshot - JPG) {import screenshot.jpg && display -resize 50% screenshot.jpg}
- [exec] (Screenshot - PNG) {import screenshot.png && display -resize 50% screenshot.png}
- [exec] (Run) {fbrun }
- [exec] (Regen Menu) {/usr/bin/fluxbox-generate_menu }
-[end]
- [commanddialog] (Fluxbox Command)
- [reconfig] (Reload config)
- [restart] (Restart)
- [exec] (About) {(fluxbox -v; fluxbox -info | sed 1d) 2> /dev/null | xmessage -file - -center}
- [separator]
- [exit] (Exit)
-[end]
-[endencoding]
-[end]
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
deleted file mode 100644
index ef5b398..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/menuconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file is read by fluxbox-generate_menu. If you don't like a
-# default you can change it here. Don't forget to remove the # in front
-# of the line.
-
-# Your favourite terminal. Put the command in quotes if you want to use
-# options. Put a backslash in before odd chars
-# MY_TERM='Eterm --tint \#123456'
-# MY_TERM='aterm -tint $(random_color)'
-
-# Your favourite browser. You can also specify options.
-# MY_BROWSER=mozilla
-
-# Name of the outputfile
-# MENUFILENAME=/home/mythtv/.fluxbox/menu
-
-# MENUTITLE=`fluxbox -version|cut -d " " -f-2`
-
-# standard url for console-browsers
-# HOMEPAGE=fluxbox.org
-
-# location with your own menu-entries
-# USERMENU=~/.fluxbox/usermenu
-
-# Put the launcher you would like to use here
-# LAUNCHER=fbrun
-# LAUNCHER=fbgm
-
-# Options for fbrun
-# FBRUNOPTIONS='-font 10x20 -fg grey -bg black -title run'
-
-# --- PREFIX'es
-# These are prefixes; So if fluxbox is installed in /usr/bin/fluxbox
-# your prefix is: /usr
-
-# fluxbox-generate already looks in /usr/X11R6, /usr, /usr/local and /opt so
-# there should be no need to specify them.
-#
-# PREFIX=/usr
-# GNOME_PREFIX=/opt/gnome
-# KDE_PREFIX=/opt/kde
-
-
-# Sepparate the list of background-dirs with semicolumns ':'
-# BACKGROUND_DIRS="/home/mythtv/.fluxbox/backgrounds/:/usr/share/fluxbox/backgrounds/:/usr/share/wallpapers"
-
-
-# --- Boolean variables.
-# Setting a variable to no'' won't help. Comment them out if you don't
-# want them. Setting are overruled by the command-line options.
-
-# Include all backgrounds in your backgrounds-directory
-# BACKGROUNDMENUITEM=yes
-
-# Include kde-menus
-# KDEMENU=yes
-
-# Include gnome-menus
-# GNOMEMENU=yes
-
-# enable sudo commands
-# DOSUDO=yes
-
-# Don't cleanup the menu
-# REMOVE=no
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png
deleted file mode 100644
index 83da80c..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.fluxbox/wallpaper.png
+++ /dev/null
Binary files differ
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc
deleted file mode 100755
index 911e76e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xinitrc
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
-# ... or any other WM of your choosing ...
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/home/mythtv/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow
deleted file mode 100644
index f6cf005..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.allow
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# /etc/hosts.allow
-#
-ALL: 192.168.
-ALL: 10.
-ALL: 127.0.0.1
-ALL: 172.16.
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny
deleted file mode 100755
index ca30ab4..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/hosts.deny
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# /etc/hosts.deny
-#
-ALL
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst
deleted file mode 100755
index 8a8e3b2..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/menu.lst
+++ /dev/null
@@ -1,60 +0,0 @@
-# Config file for GRUB - The GNU GRand Unified Bootloader
-# /boot/grub/menu.lst
-
-# DEVICE NAME CONVERSIONS
-#
-# Linux Grub
-# -------------------------
-# /dev/fd0 (fd0)
-# /dev/hda (hd0)
-# /dev/hdb2 (hd1,1)
-# /dev/hda3 (hd0,2)
-#
-
-# FRAMEBUFFER RESOLUTION SETTINGS
-# +-------------------------------------------------+
-# | 640x480 800x600 1024x768 1280x1024
-# ----+--------------------------------------------
-# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
-# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
-# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
-# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
-# +-------------------------------------------------+
-
-# general configuration:
-timeout 5
-default 0
-#color light-blue/black light-cyan/blue
-
-# boot sections follow
-# each is implicitly numbered from 0 in the order of appearance below
-#
-# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
-#
-#-*
-hiddenmenu
-
-# (0) normal
-title LinHes
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit console=tty1
-initrd /boot/kernel26.img
-
-# (1) bootsplash
-title LinHes-splashy
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes console=tty1
-initrd /boot/kernel26.img
-
-# (2) noautologin
-title LinHES-nologin
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes console=tty1 nox
-initrd /boot/kernel26.img
-
-
-# (3) normal
-title LinHes-init
-root (hd0,0)
-kernel /boot/vmlinuz26 root=/dev/hda1 ro console=tty1
-initrd /boot/kernel26.img
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh
deleted file mode 100755
index 6caf191..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/modify_chroot.sh
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/bin/bash
-
-useradd -m -s /bin/bash mythtv -G audio,video,optical,storage,users
-cp -rvpf /.post_process/home/mythtv /home/
-cp -rvpf /.post_process/home/mythtv/.fluxbox /root
-chown -R mythtv.mythtv /home/mythtv/
-chown -R mythtv.mythtv /myth
-
-cp -f /.post_process/hosts.allow /etc/hosts.allow
-cp -f /.post_process/rc.conf /etc/rc.conf
-#cp -f /.post_process/rc.shutdown /etc/rc.shutdown
-cp -f /.post_process/menu.lst /boot/grub/menu.lst
-
-cp -f /etc/skel/.bash* /root/
-rm -f /etc/ssh/ssh_host*key*
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf
deleted file mode 100755
index 9c17944..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.conf
+++ /dev/null
@@ -1,112 +0,0 @@
-#
-# /etc/rc.conf - Main Configuration for Arch Linux
-#
-
-#
-# -----------------------------------------------------------------------
-# LOCALIZATION
-# -----------------------------------------------------------------------
-#
-# LOCALE: available languages can be listed with the 'locale -a' command
-# HARDWARECLOCK: set to "UTC" or "localtime"
-# TIMEZONE: timezones are found in /usr/share/zoneinfo
-# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
-# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
-# CONSOLEMAP: found in /usr/share/kbd/consoletrans
-# USECOLOR: use ANSI color sequences in startup messages
-#
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="US/Central"
-KEYMAP="us"
-CONSOLEFONT=
-CONSOLEMAP=
-USECOLOR="yes"
-
-#
-# -----------------------------------------------------------------------
-# HARDWARE
-# -----------------------------------------------------------------------
-#
-# Scan hardware and load required modules at bootup
-MOD_AUTOLOAD="yes"
-if [ -f /etc/systemconfig ]
-then
- . /etc/systemconfig
-fi
-
-if [ x$Audiotype = xOSS -a ! -f /tmp/.alsatest ]
-then
- ALSABLACKLIST="!soundcore"
-else
- if [ x$Audiotype = xOSS ]
- then
- ALSABLACKLIST="!soundcore"
- else
- ALSABLACKLIST=""
- fi
-fi
-
-# Module Blacklist - modules in this list will never be loaded by udev
-MOD_BLACKLIST_=($ALSABLACKLIST !snd-pcsp )
-#
-# Modules to load at boot-up (in this order)
-# - prefix a module with a ! to blacklist it
-#
-MODULES=($MOD_BLACKLIST_)
-# Scan for LVM volume groups at startup, required if you use LVM
-USELVM="no"
-
-#
-# -----------------------------------------------------------------------
-# NETWORKING
-# -----------------------------------------------------------------------
-#
-HOSTNAME=`cat /etc/hostname`
-
-#The following is only used on the install. After the first boot everything is set from /etc/net.
-
-
-#
-# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
-# interfaces.
-#
-# Interfaces to start at boot-up (in this order)
-# Declare each interface then list in INTERFACES
-# - prefix an entry in INTERFACES with a ! to disable it
-# - no hyphens in your interface names - Bash doesn't like it
-#
-# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
-#
-lo="lo 127.0.0.1"
-#eth0="dhcp"
-INTERFACES=(lo )
-#
-# Routes to start at boot-up (in this order)
-# Declare each route then list in ROUTES
-# - prefix an entry in ROUTES with a ! to disable it
-#
-gateway="default gw 192.168.0.1"
-ROUTES=(!gateway)
-#
-# Enable these network profiles at boot-up. These are only useful
-# if you happen to need multiple network configurations (ie, laptop users)
-# - set to 'menu' to present a menu during boot-up (dialog package required)
-# - prefix an entry with a ! to disable it
-#
-# Network profiles are found in /etc/network-profiles
-#
-#NET_PROFILES=(main)
-
-#
-# -----------------------------------------------------------------------
-# DAEMONS
-# -----------------------------------------------------------------------
-#
-# Daemons to start at boot-up (in this order)
-# - prefix a daemon with a ! to disable it
-# - prefix a daemon with a @ to start it up in the background
-#
-#DAEMONS=(syslog-ng network netfs crond)
-DAEMONS=(fbsplash !syslog-ng !hotplug !pcmcia network !mysqld !dbus !avahi-daemon)
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown
deleted file mode 100755
index 1a8cdbe..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/post_process/rc.shutdown
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-if [ -x /etc/rc.local.shutdown ]; then
- /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
- # Shutdown daemons
- let i=${#DAEMONS[@]}
- while [[ i -ge 0 ]]; do
- if [[ `echo ${DAEMONS[$i]} | grep '^[^\!]' | wc -l` -eq 1 ]]; then
- /etc/rc.d/${DAEMONS[$i]#@} stop
- fi
- let i=i-1
- done
- # find any leftover daemons and shut them down
- if [ -d /var/run/daemons ]; then
- for daemon in `ls /var/run/daemons`; do
- /etc/rc.d/$daemon stop
- done
- fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-stat_busy "Saving System Clock"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
- /sbin/hwclock --directisa --utc --systohc
-else
- /sbin/hwclock --directisa --localtime --systohc
-fi
-stat_done
-
-# removing psmouse module to fix some reboot issues on newer laptops
-modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-stat_busy "Deactivating Swap"
-/sbin/swapoff -a
-stat_done
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a
-stat_done
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
- if [ -d /etc/lvm -a -x /sbin/lvm ]; then
- /bin/mount -n -t sysfs none /sys 2>/dev/null
- if [ -d /sys/block ]; then
- stat_busy "Deactivating LVM2 groups"
- /sbin/lvm vgchange --ignorelockingfailure -a n
- stat_done
- umount /sys
- fi
- fi
-fi
-
-stat_busy "Remounting Root Filesystem Read-only"
-/bin/mount -n -o remount,ro /
-stat_done
-exit 0
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
- printsep
- printhl "${C_H2}POWER OFF"
- /sbin/poweroff -d -f -h -i
-else
- printsep
- printhl "${C_H2}REBOOTING"
- # adding kexec support
- [ -x /usr/sbin/kexec ] && /usr/sbin/kexec -e > /dev/null 2>&1
- /sbin/reboot -d -f -i
-fi
-
-# End of file
-# vim: set ts=2 noet:
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh b/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh
deleted file mode 100755
index 5bc1f9c..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/pre-process.sh
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/bin/sh
-rm -f overlay.xpk
-if [ -d overlay/home/mythtv ]
-then
- chown -R 1000 overlay/home/mythtv
-fi
-./create_overlay.sh
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx b/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx
deleted file mode 100644
index fd0d8d3..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rcconfx
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# patch file for /etc/rc.conf
-#
-
-LOCALE="en_US.utf8"
-HARDWARECLOCK="UTC"
-TIMEZONE="UTC"
-KEYMAP="us"
-
-#MODULES=(floppy)
-MODULES=(!ati_remote)
-
-HOSTNAME="larch5"
-
-USELVM="yes"
-
-#eth0="dhcp"
-
-DAEMONS=(syslog-ng network mysqld dbus hal avahi-daemon !slim sshd)
-SPLASH="splashy"
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom
deleted file mode 100644
index 8e3ec5e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/startx.custom
+++ /dev/null
@@ -1,22 +0,0 @@
-if grep -v nox /proc/cmdline &>/dev/null && \
- [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then
- if grep i810 /proc/cmdline &>/dev/null; then
- startx -- -config xorg.conf.i810
- else
- startx
- fi
-
- # Maybe there should be some code here to handle a failed startx?
-
- # The 'return' value is at /tmp/xlogout
- # If there is nothing there, switch user to 'newuser'
- # If there is also nothing there, login as root
- # - if already root, fall through to terminal
-
- if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then
- logout
- elif [ ${UID} -ne 0 ]; then
- echo "root" >/tmp/newuser
- logout
- fi
-fi
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
deleted file mode 100644
index 5f04171..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xinit/xinitrc.custom
+++ /dev/null
@@ -1,4 +0,0 @@
-# Set the keymap
-xkmap-set
-
-exec fluxbox
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810
deleted file mode 100644
index 9615569..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810
+++ /dev/null
@@ -1,59 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
- ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # [<bool>]
- #Option "SWcursor" # [<bool>]
- #Option "ColorKey" # <i>
- #Option "CacheLines" # <i>
- #Option "Dac6Bit" # [<bool>]
- #Option "DRI" # [<bool>]
- #Option "NoDDC" # [<bool>]
- #Option "ShowCache" # [<bool>]
- #Option "XvMCSurfaces" # <i>
- #Option "PageFlip" # [<bool>]
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
deleted file mode 100644
index a295b38..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.i810.2
+++ /dev/null
@@ -1,67 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- ### Available Driver options are:-
- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
- ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
- ### [arg]: arg optional
- #Option "NoAccel" # [<bool>]
- #Option "SWcursor" # [<bool>]
- #Option "ColorKey" # <i>
- #Option "CacheLines" # <i>
- #Option "Dac6Bit" # [<bool>]
- #Option "DRI" # [<bool>]
- #Option "NoDDC" # [<bool>]
- #Option "ShowCache" # [<bool>]
- #Option "XvMCSurfaces" # <i>
- #Option "PageFlip" # [<bool>]
- Option "DRI" "False"
- #Option "AccelMethod" "exa"
- #Option "MigrationHeuristic" "greedy"
- #Option "ExaNoComposite" "False"
- Identifier "Card0"
- Driver "intel"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
deleted file mode 100644
index 6d11b2e..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/X11/xorg.conf.vesa
+++ /dev/null
@@ -1,49 +0,0 @@
-Section "ServerLayout"
- Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
-EndSection
-
-Section "Device"
- Identifier "Card0"
- Driver "vesa"
-EndSection
-
-Section "Monitor"
- Identifier "Monitor0"
- HorizSync 30.0 - 65.0
- VertRefresh 50.0 - 75.0
-EndSection
-
-Section "Screen"
- Identifier "Screen0"
- Device "Card0"
- Monitor "Monitor0"
- DefaultDepth 16
- SubSection "Display"
- Viewport 0 0
- Depth 1
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 4
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 8
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 15
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 16
- Modes "1024x768" "800x600"
- EndSubSection
- SubSection "Display"
- Viewport 0 0
- Depth 24
- EndSubSection
-EndSection
-
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd
deleted file mode 100644
index ab53c30..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/dhcpcd
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Arguments to be passed to the DHCP client daemon
-#
-
-DHCPCD_ARGS="-t 10 -h $HOSTNAME"
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps
deleted file mode 100644
index 64bb6b7..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.bootsteps
+++ /dev/null
@@ -1 +0,0 @@
-30
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf
deleted file mode 100644
index ddd88f8..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# fbsplash.conf
-#
-
-THEMES="linhes"
-SPLASH_TTYS="1 2 3 4 5 6"
-
-#EOF
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
deleted file mode 100644
index 7f8f011..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/conf.d/fbsplash.shutdownsteps
+++ /dev/null
@@ -1 +0,0 @@
-7
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow
deleted file mode 100644
index 19bc4d8..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/hosts.allow
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# /etc/hosts.allow
-#
-
-ALL: 127.0.0.1
-
-# To allow ssh in from anywhere
-sshd: ALL
-
-# To allow ssh in from local net (example)
-#sshd: 192.168.178.0/255.255.255.0
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab
deleted file mode 100644
index 39003ed..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:3:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave
deleted file mode 100644
index 2de483f..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/inittab.larchsave
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# /etc/inittab
-#
-
-# Runlevels:
-# 0 Halt
-# 1(S) Single-user
-# 2 Not used
-# 3 Multi-user
-# 4 Not used
-# 5 X11
-# 6 Reboot
-
-## Only one of the following two lines can be uncommented!
-# Boot to console
-id:5:initdefault:
-# Boot to X11
-#id:5:initdefault:
-
-rc::sysinit:/etc/rc.sysinit
-rs:S1:wait:/etc/rc.single
-rm:2345:wait:/etc/rc.multi
-rh:06:wait:/etc/rc.shutdown
-su:S:wait:/sbin/sulogin -p
-
-# -8 options fixes umlauts problem on login
-c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin
-c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux
-c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux
-c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux
-c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux
-c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux
-c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null
-
-ca::ctrlaltdel:/sbin/shutdown -t3 -r now
-
-# Example lines for starting a login manager
-#x:5:respawn:/usr/bin/xdm -nodaemon
-#x:5:respawn:/usr/sbin/gdm -nodaemon
-#x:5:respawn:/opt/kde/bin/kdm -nodaemon
-#x:5:respawn:/usr/bin/slim >& /dev/null
-
-# End of file
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown
deleted file mode 100644
index d614d4b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/larch-shutdown
+++ /dev/null
@@ -1,47 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for larch live systems
-
-f_saveclock ()
-{
- :
-}
-
-f_swapoff ()
-{
- ############################# Include session saving functions
- # . /opt/larch-live/session-save/shutdown2
- # if [ -f /tmp/checkse ]; then
- # . /tmp/checkse
- #else
- # checkse
- # fi
-
- if [ -n "${saving}" ] && ! session_save; then
- echo
- echo "If you know what you are doing, you may be able to recover"
- echo "something from this unpleasant situation."
- echo
- echo "You may use the command line to investigate further ..."
- echo
- echo "When finished please enter 'exit', the shutdown process will"
- echo "then continue."
- sh -i
- fi
-
- #############################
-
- stat_busy "Deactivating Swap"
- /sbin/swapoff -a
- stat_done
-}
-
-f_remountro ()
-{
- if [ -n "${ejectdev}" ]; then
- echo "Ejecting live CD"
- eject ${ejectdev}
- echo "sleeping for 6 seconds"
- sleep 6
-
- fi
-}
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options
deleted file mode 100644
index 237c390..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/ppp/options
+++ /dev/null
@@ -1,352 +0,0 @@
-# /etc/ppp/options
-#
-# Originally created by Jim Knoble <jmknoble@mercury.interpath.net>
-# Modified for Debian by alvar Bray <alvar@meiko.co.uk>
-# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
-# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org>
-#
-# To quickly see what options are active in this file, use this command:
-# egrep -v '#|^ *$' /etc/ppp/options
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-# ms-dns 192.168.1.1
-# ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-# ms-wins 192.168.1.50
-# ms-wins 192.168.1.51
-
-# Run the executable or shell command specified after pppd has
-# terminated the link. This script could, for example, issue commands
-# to the modem to cause it to hang up if hardware modem control signals
-# were not available.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-asyncmap 0
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Use software flow control (i.e. XON/XOFF) to control the flow of data
-# on the serial port.
-#xonxoff
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Don't use the modem control lines.
-#local
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Don't show the passwords when logging the contents of PAP packets.
-# This is the default.
-hide-password
-
-# When logging the contents of PAP packets, this option causes pppd to
-# show the password string in the log message.
-#show-password
-
-# Use the modem control lines. On Ultrix, this option implies hardware
-# flow control, as for the crtscts option. (This option is not fully
-# implemented.)
-modem
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Disables the default behaviour when no local IP address is specified,
-# which is to determine (if possible) the local IP address from the
-# hostname. With this option, the peer will have to supply the local IP
-# address during IPCP negotiation (unless it specified explicitly on the
-# command line or in an options file).
-#noipdefault
-
-# Enables the "passive" option in the LCP. With this option, pppd will
-# attempt to initiate a connection; if no reply is received from the
-# peer, pppd will then just wait passively for a valid LCP packet from
-# the peer (instead of exiting, as it does without this option).
-#passive
-
-# With this option, pppd will not transmit LCP packets to initiate a
-# connection until a valid LCP packet is received from the peer (as for
-# the "passive" option with old versions of pppd).
-#silent
-
-# Don't request or allow negotiation of any options for LCP and IPCP
-# (use default values).
-#-all
-
-# Disable Address/Control compression negotiation (use default, i.e.
-# address/control field disabled).
-#-ac
-
-# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
-# all control characters).
-#-am
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-#-detach
-
-# Disable IP address negotiation (with this option, the remote IP
-# address must be specified with an option on the command line or in
-# an options file).
-#-ip
-
-# Disable IPCP negotiation and IP communication. This option should
-# only be required if the peer is buggy and gets confused by requests
-# from pppd for IPCP negotiation.
-#noip
-
-# Disable magic number negotiation. With this option, pppd cannot
-# detect a looped-back line.
-#-mn
-
-# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
-# 1500).
-#-mru
-
-# Disable protocol field compression negotiation (use default, i.e.
-# protocol field compression disabled).
-#-pc
-
-# Require the peer to authenticate itself using PAP.
-#+pap
-
-# Don't agree to authenticate using PAP.
-#-pap
-
-# Require the peer to authenticate itself using CHAP [Cryptographic
-# Handshake Authentication Protocol] authentication.
-#+chap
-
-# Don't agree to authenticate using CHAP.
-#-chap
-
-# Disable negotiation of Van Jacobson style IP header compression (use
-# default, i.e. no compression).
-#-vj
-
-# Increase debugging level (same as -d). If this option is given, pppd
-# will log the contents of all control packets sent or received in a
-# readable form. The packets are logged through syslog with facility
-# daemon and level debug. This information can be directed to a file by
-# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
-# pppd is compiled with extra debugging enabled, it will log messages
-# using facility local2 instead of daemon).
-#debug
-
-# Append the domain name <d> to the local host name for authentication
-# purposes. For example, if gethostname() returns the name porsche,
-# but the fully qualified domain name is porsche.Quotron.COM, you would
-# use the domain option to set the domain name to Quotron.COM.
-#domain <d>
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the name of the local system for authentication purposes to <n>.
-# This is a privileged option. With this option, pppd will use lines in the
-# secrets files which have <n> as the second field when looking for a
-# secret to use in authenticating the peer. In addition, unless overridden
-# with the user option, <n> will be used as the name to send to the peer
-# when authenticating the local system to the peer. (Note that pppd does
-# not append the domain name to <n>.)
-#name <n>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-#usehostname
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system.
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-# login
-
-# If this option is given, pppd will send an LCP echo-request frame to the
-# peer every n seconds. Normally the peer should respond to the echo-request
-# by sending an echo-reply. This option can be used with the
-# lcp-echo-failure option to detect that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Set the LCP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#lcp-restart <n>
-
-# Set the maximum number of LCP terminate-request transmissions to <n>
-# (default 3).
-#lcp-max-terminate <n>
-
-# Set the maximum number of LCP configure-request transmissions to <n>
-# (default 10).
-#lcp-max-configure <n>
-
-# Set the maximum number of LCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#lcp-max-failure <n>
-
-# Set the IPCP restart interval (retransmission timeout) to <n>
-# seconds (default 3).
-#ipcp-restart <n>
-
-# Set the maximum number of IPCP terminate-request transmissions to <n>
-# (default 3).
-#ipcp-max-terminate <n>
-
-# Set the maximum number of IPCP configure-request transmissions to <n>
-# (default 10).
-#ipcp-max-configure <n>
-
-# Set the maximum number of IPCP configure-NAKs returned before starting
-# to send configure-Rejects instead to <n> (default 10).
-#ipcp-max-failure <n>
-
-# Set the PAP restart interval (retransmission timeout) to <n> seconds
-# (default 3).
-#pap-restart <n>
-
-# Set the maximum number of PAP authenticate-request transmissions to
-# <n> (default 10).
-#pap-max-authreq <n>
-
-# Set the maximum time that pppd will wait for the peer to authenticate
-# itself with PAP to <n> seconds (0 means no limit).
-#pap-timeout <n>
-
-# Set the CHAP restart interval (retransmission timeout for
-# challenges) to <n> seconds (default 3).
-#chap-restart <n>
-
-# Set the maximum number of CHAP challenge transmissions to <n>
-# (default 10).
-#chap-max-challenge
-
-# If this option is given, pppd will rechallenge the peer every <n>
-# seconds.
-#chap-interval <n>
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Disable the IPXCP and IPX protocols.
-# To let pppd pass IPX packets comment this out --- you'll probably also
-# want to install ipxripd, and have the Internal IPX Network option enabled
-# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info.
-noipx
-
-# Exit once a connection has been made and terminated. This is the default,
-# unless the `persist' or `demand' option has been specified.
-#nopersist
-
-# Do not exit after a connection is terminated; instead try to reopen
-# the connection.
-#persist
-
-# Terminate after n consecutive failed connection attempts.
-# A value of 0 means no limit. The default value is 10.
-#maxfail <n>
-
-# Initiate the link only on demand, i.e. when data traffic is present.
-# With this option, the remote IP address must be specified by the user on
-# the command line or in an options file. Pppd will initially configure
-# the interface and enable it for IP traffic without connecting to the peer.
-# When traffic is available, pppd will connect to the peer and perform
-# negotiation, authentication, etc. When this is completed, pppd will
-# commence passing data packets (i.e., IP packets) across the link.
-#demand
-
-# Specifies that pppd should disconnect if the link is idle for <n> seconds.
-# The link is idle when no data packets (i.e. IP packets) are being sent or
-# received. Note: it is not advisable to use this option with the persist
-# option without the demand option. If the active-filter option is given,
-# data packets which are rejected by the specified activity filter also
-# count as the link being idle.
-#idle <n>
-
-# Specifies how many seconds to wait before re-initiating the link after
-# it terminates. This option only has any effect if the persist or demand
-# option is used. The holdoff period is not applied if the link was
-# terminated because it was idle.
-#holdoff <n>
-
-# Wait for up n milliseconds after the connect script finishes for a valid
-# PPP packet from the peer. At the end of this time, or when a valid PPP
-# packet is received from the peer, pppd will commence negotiation by
-# sending its first LCP packet. The default value is 1000 (1 second).
-# This wait period only applies if the connect or pty option is used.
-#connect-delay <n>
-
-# Packet filtering: for more information, see pppd(8)
-# Any packets matching the filter expression will be interpreted as link
-# activity, and will cause a "demand" connection to be activated, and reset
-# the idle connection timer. (idle option)
-# The filter expression is akin to that of tcpdump(1)
-#active-filter <filter-expression>
-
-# uncomment the line below this if you use PPPoE
-#plugin /usr/lib/pppd/plugins/pppoe.so
-
-# ---<End of File>---
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local
deleted file mode 100755
index 2d488a2..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local
+++ /dev/null
@@ -1,93 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-. /etc/rc.conf
-. /etc/rc.d/functions
-. /etc/profile
-. ${MV_ROOT}/bin/install_functions.sh
-
-function mysql_check {
- mysql -e "show databases;" 2>/dev/null >/dev/null
- return $?
-}
-
-function mythconverg_check {
- mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null
- return $?
-}
-
-function install_db {
- pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null
- pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null
-}
-
-
-
-
-#check to see if mysql is running
-stat_busy "Checking Mysql"
-ATTEMPT=0
-mysql_check && printhl " Installing the initial database" &&install_db
-mythconverg_check
-status=$?
-while [ ! $status = 0 ]
-do
- ((ATTEMPT=ATTEMPT+1))
- /etc/rc.d/mysqld stop
- sleep 2
- /etc/rc.d/mysqld start
- mysqlstatus=$?
- if [ $mysqlstatus = 0 ]
- then
- mysql_check && install_db
- mythconverg_check
- status=$?
- fi
- if [ $ATTEMPT = 20 ]
- then
- printhl " Could not start mysql or install mythconverg within 20 attempts"
- printhl " Aborting install"
- exit 20
- fi
-done
-stat_done
-
-#check network parms
-stat_busy "Checking network"
-init_network
-stat_done
-
-stat_busy "Probing network"
-request_dhcp &
-stat_done
-
-#save some cmdline options
-stat_busy "Parsing command line"
-parse_cmdline_2_db
-bootsplash_setup
-stat_done
-
-#search for remote
-stat_busy "Checking for remote"
-init_remote
-stat_done
-printhl "Finished"
-
-
-echo $CMDLINE | grep -qi NoX
-if [ $? = 0 ]
-then
- echo ""
- printhl "No auto X option found"
- # /usr/bin/chvt 2
-else
- /root/startx &
-fi
-
-
-# Set up automatically logged in user
-if [ -f /.livesys/autologin ]; then
- cp /.livesys/autologin /tmp/newuser
-fi
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig
deleted file mode 100755
index 47b24ef..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.orig
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local: Local multi-user startup script.
-#
-
-# Restore saved sound volume, etc.
-alsactl restore
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown
deleted file mode 100755
index 2b5f735..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/rc.local.shutdown
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.local.shutdown: Local shutdown script.
-#
-
-# Save sound volume, etc.
-alsactl store
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile
deleted file mode 100644
index 600bd9b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bash_profile
+++ /dev/null
@@ -1,3 +0,0 @@
-. $HOME/.bashrc
-
-. /etc/X11/xinit/startx.custom
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc
deleted file mode 100644
index fcabce0..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.bashrc
+++ /dev/null
@@ -1,3 +0,0 @@
-alias ls='ls --color=auto'
-PS1='[\u@\h \W]\$ '
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc
deleted file mode 100644
index c6febe5..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xinitrc
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xinitrc
-#
-# Executed by startx (run your window manager from here)
-#
-
-# exec gnome-session
-# exec startkde
-# exec startxfce4
-# exec icewm
-# exec openbox
-# exec blackbox
-exec fluxbox
-# exec ratpoison
-# exec dwm
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession
deleted file mode 100755
index a16dc0b..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/skel/.xsession
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-#
-# ~/.xsession
-#
-# Executed by xdm/gdm/kdm at login
-#
-
-/bin/bash --login -i ~/.xinitrc
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf
deleted file mode 100644
index 35ed579..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/etc/slim.conf
+++ /dev/null
@@ -1,79 +0,0 @@
-# Path, X server and arguments (if needed)
-# Note: -xauth $authfile is automatically appended
-default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
-default_xserver /usr/bin/X
-xserver_arguments -nolisten tcp vt07
-
-# Commands for halt, login, etc.
-halt_cmd /sbin/shutdown -h now
-reboot_cmd /sbin/shutdown -r now
-console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
-#suspend_cmd /usr/sbin/suspend
-
-# Full path to the xauth binary
-xauth_path /usr/bin/xauth
-
-# Xauth file for server
-authfile /var/run/slim.auth
-
-
-# Activate numlock when slim starts. Valid values: on|off
-# numlock on
-
-# Hide the mouse cursor (note: does not work with some WMs).
-# Valid values: true|false
-# hidecursor false
-
-# This command is executed after a succesful login.
-# you can place the %session and %theme variables
-# to handle launching of specific commands in .xinitrc
-# depending of chosen session and slim theme
-#
-# NOTE: if your system does not have bash you need
-# to adjust the command according to your preferred shell,
-# i.e. for freebsd use:
-# login_cmd exec /bin/sh - ~/.xinitrc %session
-login_cmd exec /bin/bash -login ~/.xinitrc %session
-
-# Commands executed when starting and exiting a session.
-# They can be used for registering a X11 session with
-# sessreg. You can use the %user variable
-#
-# sessionstart_cmd some command
-# sessionstop_cmd some command
-
-# Start in daemon mode. Valid values: yes | no
-# Note that this can overridden by the command line
-# option "-d"
-# daemon yes
-
-# Available sessions (first one is the default).
-# The current chosen session name is replaced in the login_cmd
-# above, so your login command can handle different sessions.
-# see the xinitrc.sample file shipped with slim sources
-sessions xfce4,icewm,wmaker,blackbox
-
-# Executed when pressing F11 (requires imagemagick)
-screenshot_cmd import -window root /slim.png
-
-# welcome message. Available variables: %host, %domain
-welcome_msg Welcome to %host
-
-# shutdown / reboot messages
-shutdown_msg The system is halting...
-reboot_msg The system is rebooting...
-
-# default user, leave blank or remove this line
-# for avoid pre-loading the username.
-#default_user simone
-
-# current theme, use comma separated list to specify a set to
-# randomly choose from
-current_theme dlarch
-
-# Lock file
-lockfile /var/lock/slim.lock
-
-# Log file
-logfile /var/log/slim.log
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps
deleted file mode 100644
index 68fae0a..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/.fluxbox/apps
+++ /dev/null
@@ -1,2 +0,0 @@
-[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png}
-
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh
deleted file mode 100755
index 6acd24a..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/LinHES-install.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-#redirect stderr to stdout, then rediret stdout to file
-. /etc/profile
-exec 2>&1
-exec > /tmp/mythvantage_install.log
-#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2
-#keylaunch &
-#/usr/bin/tilda &
-#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents &
-export MALLOC_CHECK_=0
-xset s off
-xset -dpms
-xhost +
-
-CMDLINE=$(cat /proc/cmdline)
-echo $CMDLINE |grep -q nfsroot
-NFSROOT=$?
-echo $CMDLINE |grep -q clean_upgrade
-if [ $? = 0 ]
-then
- export CLEAN_UPGRADE=YES
-else
- export CLEAN_UPGRADE=NO
-fi
-MythVantage -r
-
-if [ x$NFSROOT = x1 ]
-then
- unbuffer MythVantage &
-else
- NETBOOT=YES MythVantage &
-fi
-
-exec fluxbox > /var/log/fluxbox.log 2>&1
diff --git a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx b/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx
deleted file mode 100755
index 9274703..0000000
--- a/build_tools/clarch/larch/profiles/i686-testing-local/rootoverlay/root/startx
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/bash
-. /etc/profile
-
-export USER=root
-export HOME=/root
-
-CMDLINE=$(cat /proc/cmdline)
-TEMPVAR=${CMDLINE#*ip=}
-IP=${TEMPVAR%% *}
-echo $CMDLINE |grep -q vnc
-USEVNC=$?
-
-if [ x$USEVNC = x1 ]
-then
- $MV_ROOT/bin/xconfig.sh 2>/dev/null
- cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install
- startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log
- else
- #VNC
- pacman -Sf --noconfirm tightvnc
- cd /root
- mkdir .vnc
- echo mythvantage |vncpasswd -f > /root/.vnc/passwd
- chmod 500 /root/.vnc/passwd
- rm /root/.vnc/xstartup
- ln -s /root/LinHES-install.sh /root/.vnc/xstartup
- vncserver
-fi