diff options
Diffstat (limited to 'build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay')
26 files changed, 1101 insertions, 0 deletions
diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom new file mode 100755 index 0000000..8e3ec5e --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/startx.custom @@ -0,0 +1,22 @@ +if grep -v nox /proc/cmdline &>/dev/null && \ + [ -z "$DISPLAY" ] && echo $(tty) | grep /vc/1 &>/dev/null; then + if grep i810 /proc/cmdline &>/dev/null; then + startx -- -config xorg.conf.i810 + else + startx + fi + + # Maybe there should be some code here to handle a failed startx? + + # The 'return' value is at /tmp/xlogout + # If there is nothing there, switch user to 'newuser' + # If there is also nothing there, login as root + # - if already root, fall through to terminal + + if [ -f /tmp/xlogout ] || [ -f /tmp/newuser ]; then + logout + elif [ ${UID} -ne 0 ]; then + echo "root" >/tmp/newuser + logout + fi +fi diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom new file mode 100755 index 0000000..5f04171 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xinit/xinitrc.custom @@ -0,0 +1,4 @@ +# Set the keymap +xkmap-set + +exec fluxbox diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf new file mode 100755 index 0000000..6d11b2e --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf @@ -0,0 +1,49 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "Screen0" 0 0 +EndSection + +Section "Device" + Identifier "Card0" + Driver "vesa" +EndSection + +Section "Monitor" + Identifier "Monitor0" + HorizSync 30.0 - 65.0 + VertRefresh 50.0 - 75.0 +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + DefaultDepth 16 + SubSection "Display" + Viewport 0 0 + Depth 1 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 4 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 8 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 15 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 16 + Modes "1024x768" "800x600" + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 24 + EndSubSection +EndSection + + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810 b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810 new file mode 100755 index 0000000..9615569 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810 @@ -0,0 +1,59 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "Screen0" 0 0 +EndSection + +Section "Device" + ### Available Driver options are:- + ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", + ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" + ### [arg]: arg optional + #Option "NoAccel" # [<bool>] + #Option "SWcursor" # [<bool>] + #Option "ColorKey" # <i> + #Option "CacheLines" # <i> + #Option "Dac6Bit" # [<bool>] + #Option "DRI" # [<bool>] + #Option "NoDDC" # [<bool>] + #Option "ShowCache" # [<bool>] + #Option "XvMCSurfaces" # <i> + #Option "PageFlip" # [<bool>] + Option "DRI" "False" + #Option "AccelMethod" "exa" + #Option "MigrationHeuristic" "greedy" + #Option "ExaNoComposite" "False" + Identifier "Card0" + Driver "intel" +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + SubSection "Display" + Viewport 0 0 + Depth 1 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 4 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 8 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 15 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 16 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 24 + EndSubSection +EndSection + + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2 b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2 new file mode 100755 index 0000000..a295b38 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.i810.2 @@ -0,0 +1,67 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "Screen0" 0 0 +EndSection + +Section "Device" + ### Available Driver options are:- + ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", + ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" + ### [arg]: arg optional + #Option "NoAccel" # [<bool>] + #Option "SWcursor" # [<bool>] + #Option "ColorKey" # <i> + #Option "CacheLines" # <i> + #Option "Dac6Bit" # [<bool>] + #Option "DRI" # [<bool>] + #Option "NoDDC" # [<bool>] + #Option "ShowCache" # [<bool>] + #Option "XvMCSurfaces" # <i> + #Option "PageFlip" # [<bool>] + Option "DRI" "False" + #Option "AccelMethod" "exa" + #Option "MigrationHeuristic" "greedy" + #Option "ExaNoComposite" "False" + Identifier "Card0" + Driver "intel" +EndSection + +Section "Monitor" + Identifier "Monitor0" + HorizSync 30.0 - 65.0 + VertRefresh 50.0 - 75.0 +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + DefaultDepth 16 + SubSection "Display" + Viewport 0 0 + Depth 1 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 4 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 8 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 15 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 16 + Modes "1024x768" "800x600" + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 24 + EndSubSection +EndSection + + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa new file mode 100755 index 0000000..6d11b2e --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/X11/xorg.conf.vesa @@ -0,0 +1,49 @@ +Section "ServerLayout" + Identifier "X.org Configured" + Screen 0 "Screen0" 0 0 +EndSection + +Section "Device" + Identifier "Card0" + Driver "vesa" +EndSection + +Section "Monitor" + Identifier "Monitor0" + HorizSync 30.0 - 65.0 + VertRefresh 50.0 - 75.0 +EndSection + +Section "Screen" + Identifier "Screen0" + Device "Card0" + Monitor "Monitor0" + DefaultDepth 16 + SubSection "Display" + Viewport 0 0 + Depth 1 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 4 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 8 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 15 + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 16 + Modes "1024x768" "800x600" + EndSubSection + SubSection "Display" + Viewport 0 0 + Depth 24 + EndSubSection +EndSection + + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd new file mode 100755 index 0000000..ab53c30 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/dhcpcd @@ -0,0 +1,6 @@ +# +# Arguments to be passed to the DHCP client daemon +# + +DHCPCD_ARGS="-t 10 -h $HOSTNAME" + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps new file mode 100755 index 0000000..64bb6b7 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.bootsteps @@ -0,0 +1 @@ +30 diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf new file mode 100755 index 0000000..ddd88f8 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.conf @@ -0,0 +1,8 @@ +# +# fbsplash.conf +# + +THEMES="linhes" +SPLASH_TTYS="1 2 3 4 5 6" + +#EOF diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps new file mode 100755 index 0000000..7f8f011 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/conf.d/fbsplash.shutdownsteps @@ -0,0 +1 @@ +7 diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow new file mode 100755 index 0000000..19bc4d8 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/hosts.allow @@ -0,0 +1,13 @@ +# +# /etc/hosts.allow +# + +ALL: 127.0.0.1 + +# To allow ssh in from anywhere +sshd: ALL + +# To allow ssh in from local net (example) +#sshd: 192.168.178.0/255.255.255.0 + +# End of file diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab new file mode 100755 index 0000000..b2364fc --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab @@ -0,0 +1,39 @@ +# +# /etc/inittab +# + +# Runlevels: +# 0 Halt +# 1(S) Single-user +# 2 Not used +# 3 Multi-user +# 4 Not used +# 5 X11 +# 6 Reboot + +## Only one of the following two lines can be uncommented! +# Boot to console +id:3:initdefault: +# Boot to X11 +#id:5:initdefault: + +rc::sysinit:/etc/rc.sysinit +rs:S1:wait:/etc/rc.single +rm:2345:wait:/etc/rc.multi +rh:06:wait:/etc/rc.shutdown +su:S:wait:/sbin/sulogin -p + +# -8 options fixes umlauts problem on login +c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux -n -l /usr/sbin/ulogin +c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux +c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux + +ca::ctrlaltdel:/sbin/shutdown -t3 -r now + +# Example lines for starting a login manager +#x:5:respawn:/usr/bin/xdm -nodaemon +#x:5:respawn:/usr/sbin/gdm -nodaemon +#x:5:respawn:/opt/kde/bin/kdm -nodaemon +#x:5:respawn:/usr/bin/slim >& /dev/null + +# End of file diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave new file mode 100755 index 0000000..2de483f --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/inittab.larchsave @@ -0,0 +1,43 @@ +# +# /etc/inittab +# + +# Runlevels: +# 0 Halt +# 1(S) Single-user +# 2 Not used +# 3 Multi-user +# 4 Not used +# 5 X11 +# 6 Reboot + +## Only one of the following two lines can be uncommented! +# Boot to console +id:5:initdefault: +# Boot to X11 +#id:5:initdefault: + +rc::sysinit:/etc/rc.sysinit +rs:S1:wait:/etc/rc.single +rm:2345:wait:/etc/rc.multi +rh:06:wait:/etc/rc.shutdown +su:S:wait:/sbin/sulogin -p + +# -8 options fixes umlauts problem on login +c1:2345:respawn:/sbin/agetty -8 38400 vc/1 linux -n -l /etc/ulogin +c2:2345:respawn:/sbin/agetty -8 38400 vc/2 linux +c3:2345:respawn:/sbin/agetty -8 38400 vc/3 linux +c4:2345:respawn:/sbin/agetty -8 38400 vc/4 linux +c5:2345:respawn:/sbin/agetty -8 38400 vc/5 linux +c6:2345:respawn:/sbin/agetty -8 38400 vc/6 linux +c7:5:respawn:/usr/bin/openvt -fwc 6 -- /bin/su - mythtv -c /usr/bin/startx >& /dev/null + +ca::ctrlaltdel:/sbin/shutdown -t3 -r now + +# Example lines for starting a login manager +#x:5:respawn:/usr/bin/xdm -nodaemon +#x:5:respawn:/usr/sbin/gdm -nodaemon +#x:5:respawn:/opt/kde/bin/kdm -nodaemon +#x:5:respawn:/usr/bin/slim >& /dev/null + +# End of file diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown new file mode 100755 index 0000000..d614d4b --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/larch-shutdown @@ -0,0 +1,47 @@ +# Functions used by rc.shutdown +# Modified versions for larch live systems + +f_saveclock () +{ + : +} + +f_swapoff () +{ + ############################# Include session saving functions + # . /opt/larch-live/session-save/shutdown2 + # if [ -f /tmp/checkse ]; then + # . /tmp/checkse + #else + # checkse + # fi + + if [ -n "${saving}" ] && ! session_save; then + echo + echo "If you know what you are doing, you may be able to recover" + echo "something from this unpleasant situation." + echo + echo "You may use the command line to investigate further ..." + echo + echo "When finished please enter 'exit', the shutdown process will" + echo "then continue." + sh -i + fi + + ############################# + + stat_busy "Deactivating Swap" + /sbin/swapoff -a + stat_done +} + +f_remountro () +{ + if [ -n "${ejectdev}" ]; then + echo "Ejecting live CD" + eject ${ejectdev} + echo "sleeping for 6 seconds" + sleep 6 + + fi +} diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch new file mode 100755 index 0000000..0a9b572 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/mkinitcpio.conf.larch @@ -0,0 +1,65 @@ +# vim:set ft=sh +# MODULES +# The following modules are loaded before any boot hooks are +# run. Advanced users may wish to specify all system modules +# in this array. For instance: +# MODULES="piix ide_disk reiserfs" +MODULES="" + +# BINARIES +# This setting includes, into the CPIO image, and additional +# binaries a given user may wish. This is run first, so may +# be used to override the actual binaries used in a given hook. +# (Existing files are NOT overwritten is already added) +# BINARIES are dependancy parsed, so you may safely ignore libraries +BINARIES="" + +# FILES +# This setting is similar to BINARIES above, however, files are added +# as-is and are not parsed in anyway. This is useful for config files. +# Some users may wish to include modprobe.conf for custom module options, +# like so: +# FILES="/etc/modprobe.conf" +FILES="" + +# HOOKS +# This is the most important setting in this file. The HOOKS control the +# modules and scripts added to the image, and what happens at boot time. +# Order is important, and it is recommended that you do not change the +# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for +# help on a given hook. +# 'base' is _required_ unless you know precisely what you are doing. +# 'udev' is _required_ in order to automatically load modules +# 'filesystems' is _required_ unless you specify your fs modules in MODULES +# Examples: +# This setup specifies all modules in the MODULES setting above. +# No raid, lvm2, or encrypted root is needed. +# HOOKS="base" +# +# This setup will autodetect all modules for your system and should +# work as a sane default +# HOOKS="base udev autodetect pata scsi sata filesystems" +# +# This is identical to the above, except the old ide subsystem is +# used for IDE devices instead of the new pata subsystem. +# HOOKS="base udev autodetect ide scsi sata filesystems" +# +# This setup will generate a 'full' image which supports most systems. +# No autodetection is done. +# HOOKS="base udev pata scsi sata usb filesystems" +# +# This setup assembles an pata raid array with an encrypted root FS. +# Note: See 'mkinitcpio -H raid' for more information on raid devices. +# HOOKS="base udev pata raid encrypt filesystems" +# +# This setup loads an lvm2 volume group on a usb device. +# HOOKS="base udev usb lvm2 filesystems" +HOOKS="base udev autodetect pata scsi sata filesystems larch1 larch2_aufs larch3 fbsplash" + +# COMPRESSION +# Use this to compress the initramfs image. With kernels earlier than +# 2.6.30, only gzip is supported, which is also the default. Newer kernels +# support gzip, bzip2 and lzma. +#COMPRESSION="gzip" +#COMPRESSION="bzip2" +#COMPRESSION="lzma" diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options new file mode 100755 index 0000000..237c390 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/ppp/options @@ -0,0 +1,352 @@ +# /etc/ppp/options +# +# Originally created by Jim Knoble <jmknoble@mercury.interpath.net> +# Modified for Debian by alvar Bray <alvar@meiko.co.uk> +# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org> +# Modified for ArchLinux by Manolis Tzanidakis <manolis@archlinux.org> +# +# To quickly see what options are active in this file, use this command: +# egrep -v '#|^ *$' /etc/ppp/options + +# Specify which DNS Servers the incoming Win95 or WinNT Connection should use +# Two Servers can be remotely configured +# ms-dns 192.168.1.1 +# ms-dns 192.168.1.2 + +# Specify which WINS Servers the incoming connection Win95 or WinNT should use +# ms-wins 192.168.1.50 +# ms-wins 192.168.1.51 + +# Run the executable or shell command specified after pppd has +# terminated the link. This script could, for example, issue commands +# to the modem to cause it to hang up if hardware modem control signals +# were not available. +#disconnect "chat -- \d+++\d\c OK ath0 OK" + +# async character map -- 32-bit hex; each bit is a character +# that needs to be escaped for pppd to receive it. 0x00000001 +# represents '\x01', and 0x80000000 represents '\x1f'. +asyncmap 0 + +# Require the peer to authenticate itself before allowing network +# packets to be sent or received. +# Please do not disable this setting. It is expected to be standard in +# future releases of pppd. Use the call option (see manpage) to disable +# authentication for specific peers. +#auth + +# Use hardware flow control (i.e. RTS/CTS) to control the flow of data +# on the serial port. +crtscts + +# Use software flow control (i.e. XON/XOFF) to control the flow of data +# on the serial port. +#xonxoff + +# Specifies that certain characters should be escaped on transmission +# (regardless of whether the peer requests them to be escaped with its +# async control character map). The characters to be escaped are +# specified as a list of hex numbers separated by commas. Note that +# almost any character can be specified for the escape option, unlike +# the asyncmap option which only allows control characters to be +# specified. The characters which may not be escaped are those with hex +# values 0x20 - 0x3f or 0x5e. +#escape 11,13,ff + +# Don't use the modem control lines. +#local + +# Specifies that pppd should use a UUCP-style lock on the serial device +# to ensure exclusive access to the device. +lock + +# Don't show the passwords when logging the contents of PAP packets. +# This is the default. +hide-password + +# When logging the contents of PAP packets, this option causes pppd to +# show the password string in the log message. +#show-password + +# Use the modem control lines. On Ultrix, this option implies hardware +# flow control, as for the crtscts option. (This option is not fully +# implemented.) +modem + +# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd +# will ask the peer to send packets of no more than <n> bytes. The +# minimum MRU value is 128. The default MRU value is 1500. A value of +# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 +# bytes of data). +#mru 542 + +# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot" +# notation (e.g. 255.255.255.0). +#netmask 255.255.255.0 + +# Disables the default behaviour when no local IP address is specified, +# which is to determine (if possible) the local IP address from the +# hostname. With this option, the peer will have to supply the local IP +# address during IPCP negotiation (unless it specified explicitly on the +# command line or in an options file). +#noipdefault + +# Enables the "passive" option in the LCP. With this option, pppd will +# attempt to initiate a connection; if no reply is received from the +# peer, pppd will then just wait passively for a valid LCP packet from +# the peer (instead of exiting, as it does without this option). +#passive + +# With this option, pppd will not transmit LCP packets to initiate a +# connection until a valid LCP packet is received from the peer (as for +# the "passive" option with old versions of pppd). +#silent + +# Don't request or allow negotiation of any options for LCP and IPCP +# (use default values). +#-all + +# Disable Address/Control compression negotiation (use default, i.e. +# address/control field disabled). +#-ac + +# Disable asyncmap negotiation (use the default asyncmap, i.e. escape +# all control characters). +#-am + +# Don't fork to become a background process (otherwise pppd will do so +# if a serial device is specified). +#-detach + +# Disable IP address negotiation (with this option, the remote IP +# address must be specified with an option on the command line or in +# an options file). +#-ip + +# Disable IPCP negotiation and IP communication. This option should +# only be required if the peer is buggy and gets confused by requests +# from pppd for IPCP negotiation. +#noip + +# Disable magic number negotiation. With this option, pppd cannot +# detect a looped-back line. +#-mn + +# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e. +# 1500). +#-mru + +# Disable protocol field compression negotiation (use default, i.e. +# protocol field compression disabled). +#-pc + +# Require the peer to authenticate itself using PAP. +#+pap + +# Don't agree to authenticate using PAP. +#-pap + +# Require the peer to authenticate itself using CHAP [Cryptographic +# Handshake Authentication Protocol] authentication. +#+chap + +# Don't agree to authenticate using CHAP. +#-chap + +# Disable negotiation of Van Jacobson style IP header compression (use +# default, i.e. no compression). +#-vj + +# Increase debugging level (same as -d). If this option is given, pppd +# will log the contents of all control packets sent or received in a +# readable form. The packets are logged through syslog with facility +# daemon and level debug. This information can be directed to a file by +# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If +# pppd is compiled with extra debugging enabled, it will log messages +# using facility local2 instead of daemon). +#debug + +# Append the domain name <d> to the local host name for authentication +# purposes. For example, if gethostname() returns the name porsche, +# but the fully qualified domain name is porsche.Quotron.COM, you would +# use the domain option to set the domain name to Quotron.COM. +#domain <d> + +# Enable debugging code in the kernel-level PPP driver. The argument n +# is a number which is the sum of the following values: 1 to enable +# general debug messages, 2 to request that the contents of received +# packets be printed, and 4 to request that the contents of transmitted +# packets be printed. +#kdebug n + +# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer +# requests a smaller value via MRU negotiation, pppd will request that +# the kernel networking code send data packets of no more than n bytes +# through the PPP network interface. +#mtu <n> + +# Set the name of the local system for authentication purposes to <n>. +# This is a privileged option. With this option, pppd will use lines in the +# secrets files which have <n> as the second field when looking for a +# secret to use in authenticating the peer. In addition, unless overridden +# with the user option, <n> will be used as the name to send to the peer +# when authenticating the local system to the peer. (Note that pppd does +# not append the domain name to <n>.) +#name <n> + +# Enforce the use of the hostname as the name of the local system for +# authentication purposes (overrides the name option). +#usehostname + +# Set the assumed name of the remote system for authentication purposes +# to <n>. +#remotename <n> + +# Add an entry to this system's ARP [Address Resolution Protocol] +# table with the IP address of the peer and the Ethernet address of this +# system. +proxyarp + +# Use the system password database for authenticating the peer using +# PAP. Note: mgetty already provides this option. If this is specified +# then dialin from users using a script under Linux to fire up ppp wont work. +# login + +# If this option is given, pppd will send an LCP echo-request frame to the +# peer every n seconds. Normally the peer should respond to the echo-request +# by sending an echo-reply. This option can be used with the +# lcp-echo-failure option to detect that the peer is no longer connected. +lcp-echo-interval 30 + +# If this option is given, pppd will presume the peer to be dead if n +# LCP echo-requests are sent without receiving a valid LCP echo-reply. +# If this happens, pppd will terminate the connection. Use of this +# option requires a non-zero value for the lcp-echo-interval parameter. +# This option can be used to enable pppd to terminate after the physical +# connection has been broken (e.g., the modem has hung up) in +# situations where no hardware modem control lines are available. +lcp-echo-failure 4 + +# Set the LCP restart interval (retransmission timeout) to <n> seconds +# (default 3). +#lcp-restart <n> + +# Set the maximum number of LCP terminate-request transmissions to <n> +# (default 3). +#lcp-max-terminate <n> + +# Set the maximum number of LCP configure-request transmissions to <n> +# (default 10). +#lcp-max-configure <n> + +# Set the maximum number of LCP configure-NAKs returned before starting +# to send configure-Rejects instead to <n> (default 10). +#lcp-max-failure <n> + +# Set the IPCP restart interval (retransmission timeout) to <n> +# seconds (default 3). +#ipcp-restart <n> + +# Set the maximum number of IPCP terminate-request transmissions to <n> +# (default 3). +#ipcp-max-terminate <n> + +# Set the maximum number of IPCP configure-request transmissions to <n> +# (default 10). +#ipcp-max-configure <n> + +# Set the maximum number of IPCP configure-NAKs returned before starting +# to send configure-Rejects instead to <n> (default 10). +#ipcp-max-failure <n> + +# Set the PAP restart interval (retransmission timeout) to <n> seconds +# (default 3). +#pap-restart <n> + +# Set the maximum number of PAP authenticate-request transmissions to +# <n> (default 10). +#pap-max-authreq <n> + +# Set the maximum time that pppd will wait for the peer to authenticate +# itself with PAP to <n> seconds (0 means no limit). +#pap-timeout <n> + +# Set the CHAP restart interval (retransmission timeout for +# challenges) to <n> seconds (default 3). +#chap-restart <n> + +# Set the maximum number of CHAP challenge transmissions to <n> +# (default 10). +#chap-max-challenge + +# If this option is given, pppd will rechallenge the peer every <n> +# seconds. +#chap-interval <n> + +# With this option, pppd will accept the peer's idea of our local IP +# address, even if the local IP address was specified in an option. +#ipcp-accept-local + +# With this option, pppd will accept the peer's idea of its (remote) IP +# address, even if the remote IP address was specified in an option. +#ipcp-accept-remote + +# Disable the IPXCP and IPX protocols. +# To let pppd pass IPX packets comment this out --- you'll probably also +# want to install ipxripd, and have the Internal IPX Network option enabled +# in your kernel. /usr/doc/HOWTO/IPX-HOWTO.gz contains more info. +noipx + +# Exit once a connection has been made and terminated. This is the default, +# unless the `persist' or `demand' option has been specified. +#nopersist + +# Do not exit after a connection is terminated; instead try to reopen +# the connection. +#persist + +# Terminate after n consecutive failed connection attempts. +# A value of 0 means no limit. The default value is 10. +#maxfail <n> + +# Initiate the link only on demand, i.e. when data traffic is present. +# With this option, the remote IP address must be specified by the user on +# the command line or in an options file. Pppd will initially configure +# the interface and enable it for IP traffic without connecting to the peer. +# When traffic is available, pppd will connect to the peer and perform +# negotiation, authentication, etc. When this is completed, pppd will +# commence passing data packets (i.e., IP packets) across the link. +#demand + +# Specifies that pppd should disconnect if the link is idle for <n> seconds. +# The link is idle when no data packets (i.e. IP packets) are being sent or +# received. Note: it is not advisable to use this option with the persist +# option without the demand option. If the active-filter option is given, +# data packets which are rejected by the specified activity filter also +# count as the link being idle. +#idle <n> + +# Specifies how many seconds to wait before re-initiating the link after +# it terminates. This option only has any effect if the persist or demand +# option is used. The holdoff period is not applied if the link was +# terminated because it was idle. +#holdoff <n> + +# Wait for up n milliseconds after the connect script finishes for a valid +# PPP packet from the peer. At the end of this time, or when a valid PPP +# packet is received from the peer, pppd will commence negotiation by +# sending its first LCP packet. The default value is 1000 (1 second). +# This wait period only applies if the connect or pty option is used. +#connect-delay <n> + +# Packet filtering: for more information, see pppd(8) +# Any packets matching the filter expression will be interpreted as link +# activity, and will cause a "demand" connection to be activated, and reset +# the idle connection timer. (idle option) +# The filter expression is akin to that of tcpdump(1) +#active-filter <filter-expression> + +# uncomment the line below this if you use PPPoE +#plugin /usr/lib/pppd/plugins/pppoe.so + +# ---<End of File>--- diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local new file mode 100755 index 0000000..2d488a2 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local @@ -0,0 +1,93 @@ +#!/bin/bash +# +# /etc/rc.local: Local multi-user startup script. +# +. /etc/rc.conf +. /etc/rc.d/functions +. /etc/profile +. ${MV_ROOT}/bin/install_functions.sh + +function mysql_check { + mysql -e "show databases;" 2>/dev/null >/dev/null + return $? +} + +function mythconverg_check { + mysql mythconverg -e "describe settings;" 2>/dev/null >/dev/null + return $? +} + +function install_db { + pacman --noconfirm -R mythdb-initial 2>/dev/null > /dev/null + pacman -S --noconfirm mythdb-initial 2>/dev/null > /dev/null +} + + + + +#check to see if mysql is running +stat_busy "Checking Mysql" +ATTEMPT=0 +mysql_check && printhl " Installing the initial database" &&install_db +mythconverg_check +status=$? +while [ ! $status = 0 ] +do + ((ATTEMPT=ATTEMPT+1)) + /etc/rc.d/mysqld stop + sleep 2 + /etc/rc.d/mysqld start + mysqlstatus=$? + if [ $mysqlstatus = 0 ] + then + mysql_check && install_db + mythconverg_check + status=$? + fi + if [ $ATTEMPT = 20 ] + then + printhl " Could not start mysql or install mythconverg within 20 attempts" + printhl " Aborting install" + exit 20 + fi +done +stat_done + +#check network parms +stat_busy "Checking network" +init_network +stat_done + +stat_busy "Probing network" +request_dhcp & +stat_done + +#save some cmdline options +stat_busy "Parsing command line" +parse_cmdline_2_db +bootsplash_setup +stat_done + +#search for remote +stat_busy "Checking for remote" +init_remote +stat_done +printhl "Finished" + + +echo $CMDLINE | grep -qi NoX +if [ $? = 0 ] +then + echo "" + printhl "No auto X option found" + # /usr/bin/chvt 2 +else + /root/startx & +fi + + +# Set up automatically logged in user +if [ -f /.livesys/autologin ]; then + cp /.livesys/autologin /tmp/newuser +fi + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown new file mode 100755 index 0000000..2b5f735 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/rc.local.shutdown @@ -0,0 +1,7 @@ +#!/bin/bash +# +# /etc/rc.local.shutdown: Local shutdown script. +# + +# Save sound volume, etc. +alsactl store diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile new file mode 100755 index 0000000..600bd9b --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bash_profile @@ -0,0 +1,3 @@ +. $HOME/.bashrc + +. /etc/X11/xinit/startx.custom diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc new file mode 100755 index 0000000..fcabce0 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.bashrc @@ -0,0 +1,3 @@ +alias ls='ls --color=auto' +PS1='[\u@\h \W]\$ ' + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc new file mode 100755 index 0000000..c6febe5 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xinitrc @@ -0,0 +1,17 @@ +#!/bin/sh + +# +# ~/.xinitrc +# +# Executed by startx (run your window manager from here) +# + +# exec gnome-session +# exec startkde +# exec startxfce4 +# exec icewm +# exec openbox +# exec blackbox +exec fluxbox +# exec ratpoison +# exec dwm diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession new file mode 100755 index 0000000..a16dc0b --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/skel/.xsession @@ -0,0 +1,10 @@ +#!/bin/sh + +# +# ~/.xsession +# +# Executed by xdm/gdm/kdm at login +# + +/bin/bash --login -i ~/.xinitrc + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf new file mode 100755 index 0000000..35ed579 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/etc/slim.conf @@ -0,0 +1,79 @@ +# Path, X server and arguments (if needed) +# Note: -xauth $authfile is automatically appended +default_path ./:/bin:/usr/bin:/usr/local/bin:/usr/bin +default_xserver /usr/bin/X +xserver_arguments -nolisten tcp vt07 + +# Commands for halt, login, etc. +halt_cmd /sbin/shutdown -h now +reboot_cmd /sbin/shutdown -r now +console_cmd /usr/bin/terminal -x /bin/sh -c "/bin/cat /etc/issue; exec /bin/login" +#suspend_cmd /usr/sbin/suspend + +# Full path to the xauth binary +xauth_path /usr/bin/xauth + +# Xauth file for server +authfile /var/run/slim.auth + + +# Activate numlock when slim starts. Valid values: on|off +# numlock on + +# Hide the mouse cursor (note: does not work with some WMs). +# Valid values: true|false +# hidecursor false + +# This command is executed after a succesful login. +# you can place the %session and %theme variables +# to handle launching of specific commands in .xinitrc +# depending of chosen session and slim theme +# +# NOTE: if your system does not have bash you need +# to adjust the command according to your preferred shell, +# i.e. for freebsd use: +# login_cmd exec /bin/sh - ~/.xinitrc %session +login_cmd exec /bin/bash -login ~/.xinitrc %session + +# Commands executed when starting and exiting a session. +# They can be used for registering a X11 session with +# sessreg. You can use the %user variable +# +# sessionstart_cmd some command +# sessionstop_cmd some command + +# Start in daemon mode. Valid values: yes | no +# Note that this can overridden by the command line +# option "-d" +# daemon yes + +# Available sessions (first one is the default). +# The current chosen session name is replaced in the login_cmd +# above, so your login command can handle different sessions. +# see the xinitrc.sample file shipped with slim sources +sessions xfce4,icewm,wmaker,blackbox + +# Executed when pressing F11 (requires imagemagick) +screenshot_cmd import -window root /slim.png + +# welcome message. Available variables: %host, %domain +welcome_msg Welcome to %host + +# shutdown / reboot messages +shutdown_msg The system is halting... +reboot_msg The system is rebooting... + +# default user, leave blank or remove this line +# for avoid pre-loading the username. +#default_user simone + +# current theme, use comma separated list to specify a set to +# randomly choose from +current_theme dlarch + +# Lock file +lockfile /var/lock/slim.lock + +# Log file +logfile /var/log/slim.log + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps new file mode 100755 index 0000000..68fae0a --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/.fluxbox/apps @@ -0,0 +1,2 @@ +[startup] {feh --bg-scale ~/.fluxbox/wallpaper.png} + diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/LinHES-install.sh b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/LinHES-install.sh new file mode 100755 index 0000000..6acd24a --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/LinHES-install.sh @@ -0,0 +1,34 @@ +#!/bin/bash +#redirect stderr to stdout, then rediret stdout to file +. /etc/profile +exec 2>&1 +exec > /tmp/mythvantage_install.log +#/usr/bin/nvidia-settings -a InitialPixmapPlacement=2 +#keylaunch & +#/usr/bin/tilda & +#/usr/X11R6/bin/unclutter -root -idle 0 -jitter 400 -noevents & +export MALLOC_CHECK_=0 +xset s off +xset -dpms +xhost + + +CMDLINE=$(cat /proc/cmdline) +echo $CMDLINE |grep -q nfsroot +NFSROOT=$? +echo $CMDLINE |grep -q clean_upgrade +if [ $? = 0 ] +then + export CLEAN_UPGRADE=YES +else + export CLEAN_UPGRADE=NO +fi +MythVantage -r + +if [ x$NFSROOT = x1 ] +then + unbuffer MythVantage & +else + NETBOOT=YES MythVantage & +fi + +exec fluxbox > /var/log/fluxbox.log 2>&1 diff --git a/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/startx b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/startx new file mode 100755 index 0000000..9274703 --- /dev/null +++ b/build_tools/larch7/larch0/profiles/linhes-remote-testing-i686/rootoverlay/root/startx @@ -0,0 +1,28 @@ +#!/bin/bash +. /etc/profile + +export USER=root +export HOME=/root + +CMDLINE=$(cat /proc/cmdline) +TEMPVAR=${CMDLINE#*ip=} +IP=${TEMPVAR%% *} +echo $CMDLINE |grep -q vnc +USEVNC=$? + +if [ x$USEVNC = x1 ] +then + $MV_ROOT/bin/xconfig.sh 2>/dev/null + cat /etc/X11/xorg.conf | sed -e 's/dev\/mouse/dev\/psaux/g'> /root/xorg.conf.install + startx /root/LinHES-install.sh -- -logverbose 6 -config /root/xorg.conf.install -allowMouseOpenFail 2>/tmp/x.log + else + #VNC + pacman -Sf --noconfirm tightvnc + cd /root + mkdir .vnc + echo mythvantage |vncpasswd -f > /root/.vnc/passwd + chmod 500 /root/.vnc/passwd + rm /root/.vnc/xstartup + ln -s /root/LinHES-install.sh /root/.vnc/xstartup + vncserver +fi |