initial import

1 files changed, 481 insertions, 0 deletions

diff --git a/abs/core-testing/live-installer/install_proxy.sh b/abs/core-testing/live-installer/install_proxy.sh
new file mode 100755
index 0000000..756c46d
--- /dev/null
+++ b/abs/core-testing/live-installer/install_proxy.sh
@@ -0,0 +1,481 @@
+#!/bin/bash
+#chroot  and /tmp
+MVHOSTNAME=mvi
+. /etc/profile
+TEMP_TEMPLATES=/tmp/templates
+disk=$2
+rootfs=$3
+rootsize=$4
+datafs=$5
+datasize=$6
+swapsize=$7
+mountpoint="/new_boot"
+run=$MV_ROOT/bin/install_functions.sh
+. /etc/systemconfig 2>/dev/null
+. $MV_ROOT/bin/networkconfig.sh
+CMDLINE=$(cat /proc/cmdline)
+
+#TEMPNET="Hostip"$default_interface
+#eval MYTHIP=\$${TEMPNET}
+
+
+progress () {
+mypercent=`echo "$1" | cut -d. -f1`
+if [  x$mypercent = x ]
+then
+echo "" > /tmp/.install_percent
+else
+echo "${mypercent}% complete" > /tmp/.install_percent
+fi
+
+
+}
+
+
+
+
+full_install () {
+    if [ -f /tmp/.this_is_upgrade ]
+    then
+        rm /tmp/.this_is_upgrade
+    fi
+    echo "Partitioning $disk" > /tmp/.install_state
+    progress 1
+    sleep 1
+    $run partition_it $disk $rootsize $datasize $swapsize
+
+    echo "Formating $disk" > /tmp/.install_state
+        progress 2
+    sleep 1
+    $run format_it $disk $rootfs $datafs
+
+    echo "Preparing $disk" > /tmp/.install_state
+    progress 3
+    sleep 1
+    $run mount_it $disk
+
+    startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+
+    echo "STARTSIZE=$startsize">/tmp/.startsize.io
+    echo "Installing data" > /tmp/.install_state
+
+    sleep 1
+        $run copy_it $disk ALL
+        rm $mountpoint/etc/fstab
+        $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
+
+    progress 99
+    sleep 1
+    $run grub_it $disk
+
+
+    echo "Configuring system" > /tmp/.install_state
+        progress 100
+        sleep 1
+        cp -f /etc/systemconfig "$mountpoint"/etc
+    #run save syssettings to save settings, then copy to new mountpoint
+        $MV_ROOT/bin/restore_default_settings.sh  -c save -t syssettings -h $MVHOSTNAME -d 127.0.0.1
+        SE=$TEMPLATES/settings/syssettings
+        mkdir -p ${mountpoint}$SE
+        cp -rp $SE/*  ${mountpoint}$SE/
+        chown root:mythtv "$mountpoint"/etc/systemconfig
+        chown -R mythtv:mythtv ${mountpoint}$SE
+
+        chmod -R 775   ${mountpoint}$SE
+        chmod 775 "$mountpoint"/etc/systemconfig
+        #copy over any updates that might have occured
+        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
+        chmod -R 755 ${mountpoint}/root
+        cp /etc/mtab "$mountpoint"/etc/mtab
+      
+
+    if  [ $SystemType = "Master_backend" -o $SystemType = "Standalone"  ]
+    then
+            #installing DB to local machine
+                #turn off old live database, so the chroot one can start
+            /etc/rc.d/mysqld stop
+            mount --bind /dev "$mountpoint/dev"
+            chroot "$mountpoint"   "$MV_ROOT/bin/install_db_chroot.sh"  >  /tmp/chrootdb.out
+            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+            echo "stopping mysql in chroot"
+            chroot "$mountpoint" /etc/rc.d/mysqld stop
+            umount "$mountpoint/dev"
+            
+            #/etc/rc.d/mysqld start
+    else
+            #update remotedb with this host settings
+            chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
+            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+            if [ !  $? = 0 ]
+            then
+                touch $mountpoint/tmp/.dbsysfailed
+                chmod 777 $mountpoint/tmp/.dbsysfailed
+            else
+            #Run second time
+            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c  ACCESSCONTROL
+            fi
+    fi
+    chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced
+    echo "Done" > /tmp/.install_state
+    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
+    $run unmount_it $disk
+}
+
+function createsquashlist(){
+if [ -f $1 ]
+then
+    rm -f 
+$1
+fi
+for i in bin boot etc home lib opt root sbin usr var
+do
+echo $i >> $1
+done
+
+
+}
+
+
+
+
+function upgrade () {
+    touch /tmp/.this_is_upgrade
+
+    if [ ! x$rootfs = "xDo_not_format" ]
+    then
+        echo "Formating $disk" > /tmp/.install_state
+            progress 2
+            sleep 1
+            $run format_it $disk $rootfs NO
+    fi
+    echo "Preparing $disk" > /tmp/.install_state
+        progress 3
+        sleep 1
+        $run mount_it $disk
+        startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
+        echo "STARTSIZE=$startsize">/tmp/.startsize.io
+        echo "Installing data" > /tmp/.install_state
+        sleep 1
+        cp -rf /tmp/etc /new_boot/etc.old
+        cp -rf  /tmp/oss /new_boot/var/lib/oss.old
+        #$run copy_it $disk bin.lzm,boot.lzm,etc.lzm,home.lzm,lib.lzm,opt.lzm,root.lzm,sbin.lzm,usr.lzm,var.lzm
+        SQUASHLIST="/tmp/.squashlist"
+        createsquashlist $SQUASHLIST
+        $run copy_it $disk $SQUASHLIST
+        #copy back ssh keys
+
+        cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
+        cp -fp /new_boot/etc.old/ssh/*.pub   /new_boot/etc/ssh/
+        cp -fp /new_boot/etc.old/ssh/*.key   /new_boot/etc/ssh/
+        cp -fp /new_boot/etc.old/ssh/*key   /new_boot/etc/ssh/
+        
+        #funckeys
+        cadir=/etc/pki/func/ca
+        mv /new_boot/etc/pki  /new_boot/etc/pki.new
+        cp -rp /new_boot/etc.old/pki  /new_boot/etc/
+        #passwd/shadow/group
+        cp -fp /new_boot/etc.old/passwd /new_boot/etc/
+        cp -fp /new_boot/etc.old/shadow /new_boot/etc/
+        cp -fp /new_boot/etc.old/group   /new_boot/etc/
+
+        if [  x$rootfs = "xDo_not_format" ]
+        then
+            #rootfs=`grep ${disk}1 /tmp/etc/fstab |awk ' { print $3 } '`
+            rootfs=`grep \/\  /tmp/etc/fstab |awk ' { print $3 } '`
+        fi
+            #datafs=`grep ${disk}3 /tmp/etc/fstab |awk ' { print $3 } '`
+            datafs=`grep \/data /tmp/etc/fstab |awk ' { print $3 } '`
+            $run fstab_fix_it $disk $rootfs $datafs UPGRADE
+
+    echo "Writing boot sector" > /tmp/.install_state
+        progress 99
+        sleep 1
+        $run grub_it $disk
+
+
+    echo "Configuring system" > /tmp/.install_state
+        progress
+        sleep 1
+        cp /etc/mtab "$mountpoint"/etc/mtab
+        cp -f /etc/systemconfig "$mountpoint"/etc
+        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
+        chmod -R 755 ${mountpoint}/root
+        chown root:mythtv "$mountpoint"/etc/systemconfig
+        chmod 775 "$mountpoint"/etc/systemconfig
+        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+        #wrap this in a network check_network, no need to update the db if the import worked.
+#####  do I need to start mysql?
+        chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
+        chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
+        #
+    #Run second time
+        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
+        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
+
+    #  fi
+
+    echo "Done" > /tmp/.install_state
+    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
+    $run unmount_it $disk
+}
+
+function netboot-full_install () {
+    TEMPVAR=${CMDLINE#*nfsroot=}
+    NFSROOT=${TEMPVAR%% *}
+    NFSROOT=`echo $NFSROOT|cut -d: -f1`
+    MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
+    URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
+    echo "calling $URL"
+    echo "Starting" > /tmp/.install_state
+    curl $URL
+    ${MV_ROOT}/bin/xconfig.sh
+}
+
+function killdhcp () {
+if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
+        then
+            pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
+            kill -9 $pid
+            rm -f /etc/dhcpc/dhcpcd-eth0.pid
+            rm -f /var/run/dhcpcd*
+        fi
+if [ -f /var/run/dhcpcd-eth0.pid ]
+        then
+            pid=`cat /var/run/dhcpcd-eth0.pid`
+            kill -9 $pid
+            rm -f /var/run/dhcpcd-eth0.pid*
+        fi
+ip address flush dev eth0
+}
+
+
+# function vnc_check() {
+#     CMDLINE=$(cat /proc/cmdline)
+#     echo $CMDLINE |grep -q vnc
+#     USEVNC=$?
+#     echo $CMDLINE |grep -q nfsroot
+#      NETBOOT=$?
+#     echo $USEVNC
+# 	if [ !  x$USEVNC = x0  ]
+# 	then
+# 	    echo "not using vnc"
+#         if [ !  x$NETBOOT = x0  ]
+#         then
+#             echo "not using netboot"
+#         else
+#             echo "using netboot"
+#             USEVNC=0
+#         fi
+# 
+#     else
+#         echo " using vnc"
+#     fi
+# }
+
+
+# function network_setup () {
+# DEVICE=eth0
+#     if [ ! -f /etc/systemconfig ]
+#     then
+#         exit 1
+#     fi
+# 
+# if [ ! x$USEVNC = x0  ]
+# then
+#     echo "Resetting  the network"
+#     killdhcp
+#     if [ $UseDHCP = 0 ]
+#     then
+#          /sbin/dhcpcd $DEVICE
+#             if [ ! $? = 0 ]
+#             then
+#                 exit 2
+#             fi
+#         fi
+# else
+#   echo "using vnc/netboot, will not reset network"
+#   echo "nameserver $nameserver" > /etc/resolv.conf
+#   return 0
+# fi
+# 
+# if [ $UseDHCP = 1 ]
+# then
+# 
+#         /sbin/ifconfig $DEVICE $ip
+#         /sbin/route add default gw $route
+#         echo "nameserver $nameserver" > /etc/resolv.conf
+# 
+# fi
+# 
+# 
+# }
+
+function SANE_SYSETTINGS () {
+sed -e '/HOSTrootfstype/d' \
+        -e '/HOSTrootfstype/d' \
+        -e '/HOSTdatafstype/d' \
+        -e '/HOSTOSsize/d'  \
+        -e '/HostUseALLdata/d'  \
+        -e '/HOSTDATAsize/d'    \
+        -e '/HOSTuprootfstype/d'    \
+        -e '/HostUseSWAP/d' \
+        -e '/HOSTSWAPsize/d  ' /tmp/templates/settings/syssettings/settings.txt  >  /tmp/settings.new
+    mv  /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
+}
+
+case $1 in
+        full_install_it )         full_install       ;;
+
+        NETBOOT)
+echo "-----------------------------------------------------------------------3-----"
+         netboot-full_install   ;;
+
+        find_update)
+            #TRY TO mount first partition of drive
+            #copy /etc/systemconfig to live,  import settings into db
+            #umount drive
+            $run mount_it $disk
+                if [ -f /new_boot/etc/systemconfig ]
+                then
+                ###########ADD templates
+                mkdir -p $TEMP_TEMPLATES
+                cp -pr /new_boot/$TEMPLATES  $TEMP_TEMPLATES
+                SANE_SYSETTINGS
+                cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/
+
+
+                cp /new_boot/etc/systemconfig /etc/systemconfig
+                cp -rf  /new_boot/etc /tmp/etc
+                cp -rf /new_boot/var/lib/oss  /tmp/oss
+
+                $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME  -d 127.0.0.1
+                fi
+            $run umount_it $disk
+            ;;
+
+        upgrade_it)
+                #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs +  "&"
+                upgrade
+
+            ;;
+        disk_model_it)
+                        model="unknown"
+                            size="xxx"
+                        case $2 in
+
+                            h* )
+                                    model=`cat /proc/ide/$2/model`
+                                    ;;
+                            s*)     model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
+                                    ;;
+                        esac
+                                size=`parted /dev/$2  print |grep Disk|awk  ' { print $3 } '  `
+
+
+                                echo ""$model" $size " >/tmp/model
+
+            ;;
+        network_check_it)
+                        #Should never return from check_network
+                        case $2 in
+                                setup_network)
+                                         vnc_check
+                                         install_network_setup
+                                ;;
+
+                                check_self)
+                                            myipdefault=`ifconfig  | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
+                                            ping -c 1 $myipdefault
+                                                    if [ ! $? = 0 ]
+                                                    then
+                                                        exit 3
+                                                        #can't ping yourself
+                                                    fi
+                                ;;
+                                check_gw)
+                                            #check gateway
+                                            mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'`
+					                        if  [ !  x$mygwdefault = x ]
+					                        then
+	                                            ping -c 1 $mygwdefault
+        	                                    if [ ! $? = 0 ]
+                	                            then
+                        	                        exit 4
+                                	      	    fi
+				                            fi
+                                ;;
+                                check_ns)
+                                            #check nameserver
+                                                    mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
+                                                    ping -c 1 $mydns
+                                                    if [ ! $? = 0 ]
+                                                    then
+                                                        exit 5
+                                                    fi
+                                ;;
+                                check_names)
+                                            host google.com
+                                            if [ ! $? = 0 ]
+                                            then
+                                                exit 6
+                                            fi
+                                ;;
+                                host_names)
+                                            host $hostname
+                                            if [  $? = 0 ]
+                                            then
+                                                exit 7
+                                            fi
+                                ;;
+
+                            esac
+                        exit 0
+            ;;
+
+
+        * )
+            state=`cat /tmp/.install_state`
+            if  [  x"${state}" =  "xConfiguring system" ]
+            then
+                progress ""
+            else
+
+                if [ -f /tmp/.startsize.io ]
+                then
+                     . /tmp/.startsize.io
+                    #finding the drive
+                    ddrive=`df |  grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
+                    used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
+                    used=`echo $used-$STARTSIZE|bc`
+                        #echo $used
+                fi
+
+        if [ ! x$used = x ]
+            then
+                .  /root/.install_size
+                #somehow find if it's an install or update
+                if [ -f /tmp/.this_is_upgrade ]
+                then
+                    total=$UPGRADESIZE
+                else
+                    total=$TOTALSIZE
+                fi
+            percent=`echo "scale=2 ;  ($used/$total) * 100 " |bc `
+            cond2=$(echo "$percent > 100" |bc  )
+            if [ $cond2 -eq 1  ]
+            then
+            percent=100
+            fi
+            cond3=$(echo "$percent < 3" |bc )
+            if [ $cond3 -eq 0   ]
+                then
+                    progress $percent
+                fi
+            fi
+        fi
+        ;;
+esac
+
+
+