diff options
author | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
---|---|---|
committer | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
commit | c2941a012cbea19073e72af561b37a1255a1fe6c (patch) | |
tree | 168850edb01eea2168329eada8f2025bf3f21e23 /abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base | |
parent | a501f7114b788b2879bab105ed4dcd7ed6a94f39 (diff) | |
download | linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.zip linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.gz linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.bz2 |
Remove wlan-ng26 as the drivers are now in the kernel.
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base')
-rw-r--r-- | abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base | 321 |
1 files changed, 0 insertions, 321 deletions
diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base deleted file mode 100644 index f81303c..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/.svn/text-base/README.svn-base +++ /dev/null @@ -1,321 +0,0 @@ -* README -* -* Copyright (C) 2001 AbsoluteValue Systems, Inc. All Rights Reserved. -* -------------------------------------------------------------------- -* -* linux-wlan -* -* The contents of this file are subject to the Mozilla Public -* License Version 1.1 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.mozilla.org/MPL/ -* -* Software distributed under the License is distributed on an "AS -* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* Alternatively, the contents of this file may be used under the -* terms of the GNU Public License version 2 (the "GPL"), in which -* case the provisions of the GPL are applicable instead of the -* above. If you wish to allow the use of your version of this file -* only under the terms of the GPL and not to allow others to use -* your version of this file under the MPL, indicate your decision -* by deleting the provisions above and replace them with the notice -* and other provisions required by the GPL. If you do not delete -* the provisions above, a recipient may use your version of this -* file under either the MPL or the GPL. -* -* -------------------------------------------------------------------- -* -* Inquiries regarding the linux-wlan Open Source project can be -* made directly to: -* -* AbsoluteValue Systems Inc. -* info@linux-wlan.com -* http://www.linux-wlan.com -* -* -------------------------------------------------------------------- -* -* Portions of the development of this software were funded by -* Intersil Corporation as part of PRISM(R) chipset product development. -* -* -------------------------------------------------------------------- - -======================================================================= -Description: -The linux-wlan package is a linux device driver and subsystem -package that is intended to provide the full range of IEEE 802.11 MAC -management capabilities for use in user-mode utilities and scripts. -The package currently supports the Intersil 802.11b Prism2, Prism2.5, -and Prism3 reference designs for PCMCIA, PCI, and USB. Additionally, -the package includes support for PLX9052 based PCI to PCMCIA adapter -with a few different PCMCIA cards. - -For a list of elements that are still undone, see the TODO file in -this directory - -======================================================================= -License: -See the COPYING and LICENSE files. - -======================================================================= -Top level directory for linux-wlan-ng: -./add-ons - additional programs that are not build from the - top level make file -./doc - source distribution documentation -./etc - scripts used at run-time -./man - man pages -./scripts - contributed scripts that may do useful things -./src - source code for various components - -======================================================================= -Build Instructions: - -NOTE: You may not need to build at all. Binary packages are -available for various distributions. See the FAQ for where to go. - -NOTE: This release supports building four different drivers: - - prism2_cs Driver for Prism2.x & Prism3 PCMCIA cards. - prism2_pci Driver for Prism2.5 (ISL3874) based _native_ PCI cards. - prism2_plx Driver for Prism2.x PCMCIA cards when used with - a PLX9052 PCI/PCMCIA adapter. - prism2_usb Driver for Prism2.x USB adapters. - - -Prerequisites: - -To build linux-wlan-ng you will need: - - Configured kernel source code for the kernel you are running. - Ideally, this will be the resulting tree after building your own - kernel. Configured means that you have at least run 'make config', - 'make menuconfig', or 'make xconfig'. If you are trying to build - linux-wlan-ng for a previously existing kernel binary (one you did - not build yourself), look for help on the mailing lists because it - can be tricky. I always run against kernels I've built myself, so I'm - not much help in this area. - - The good David Leffler identified that if you are having difficulty - with *_netlink_* symbols, you may have a problem with 'make clean' in - the kernel tree. Do a 'make mrproper' followed by 'make config' - and the rest of the kernel build process. 'make mrproper' does - a more thorough cleaning of the kernel tree. For more info, look - for David's comments in the linux-wlan-user mailing list. - - If you are building a driver for a PCMCIA card, you will also need - the configured PCMCIA source code for the pcmcia_cs subsystem you - are currently running. - -Building linux-wlan-ng: - -1) untar the package using the command: - - tar zxvf linux-wlan-ng-X.Y.Z.tar.gz - -2) Make sure you have configured kernel and (optionally) pcmcia sources on - your system. Note that if you are _only_ building the prism2_pci, - prism2_plx, or prism2_usb drivers you don't need the pcmcia-cs - source tree. - -3) To configure the linux-wlan-ng package, run 'make config'. The - following set of questions will be asked. The default answer is in - braces (e.g. []). Just press <Enter> to select the default answer: - - - "Build Prism2.x PCMCIA Card Services (_cs) driver? (y/n) [y]: " - Select "y" if you want to build the Prism PCMCIA driver. - If you select "n", the PCMCIA related questions below - will not be asked. - - - Build Prism2 PLX9052 based PCI (_plx) adapter driver? (y/n) [y]: - Select "y" if you want to build the Prism driver for - PLX PCI9052 PCI/PCMCIA adapter based solutions. - - - Build Prism2.5 native PCI (_pci) driver? (y/n) [y]: - Select "y" if you want to build the Prism driver for - Prism2.5 ISL3874 based native PCI cards. This includes - PCI add-in cards and the mini-pci modules included in some - notebook computers (but not all, some use internal USB modules). - - - Build Prism2.5 USB (_usb) driver? (y/n) [y]: - Select "y" if you want to build the Prism driver for - Prism2.5 ISL3873 based USB adapters. This includes - USB add-on modules and the internal modules included in some - notebook computers. - - - Linux source directory [/usr/src/linux]: - The config script will attempt to automagically find your kernel - source directory. If found, the kernel source source directory - will be presented as the default selection. If the default - selection is wrong, you may correct it here. - - - pcmcia-cs source dir [/usr/src/pcmcia-cs-3.1.29]: - If the "_cs" driver is selected above, the configure script will - attempt to present a reasonable default for the pcmcia source - directory. If the presented directory is incorrect, you may - change it here. If the "_cs" driver is not selected, this - prompt will not appear. - - - PCMCIA script directory [/etc/pcmcia]: - If the "_cs" driver is selected, this prompt allows you to - change the location where the pcmcia scripts will be installed. - Only do this if you have installed the rest of the pcmcia_cs - scripts to a non-default location. - - - Alternate target install root directory on host []: - This prompt allows you to specify an alternative root directory - for the install process. - - - Module install directory [/lib/modules/2.2.20]: - Select where you want the driver modules to be installed. The - script constructs a default location using the output of uname. - If you have not yet installed the kernel you will run linux-wlan - with, and the new kernel has a different version string, you will - need to change this value. - - - Prefix for build host compiler? (rarely needed) []: - When cross-compiling or using different compilers for kernel and - user-mode software, it is sometimes (but rarely) necessary to - specify a different compiler prefix to use when compiling the - _tools_ that are built to run on the build host during the - linux-wlan-ng build process. - - - Build for debugging (see doc/config.debug) (y/n) [y]: - This option enables the inclusion of debug output generating - statements in the driver code. Note that enabling those statements - requires the inclusion of insmod/modprobe command line arguments - when loading the modules. See the document doc/config.debug - for more information. - - -5) To build the package, run 'make all' - -6) To install the package, run 'make install' (as root). - -======================================================================= -Configuring: - -NOTE: linux-wlan-ng does not fully implement the wireless extensions - interface. This means that you can't use iwconfig and its kin to - set things up. Instead, read on! - -As of linux-wlan-ng 0.1.16-pre5, the configuration and launch scripts have -been largely re-written. pcmcia/rc/hotplug now all use a common library -of routines and use the same set of configuration files. - -Now, everything relevant exists in /etc/wlan/* - -/etc/wlan/wlan.conf: - - This file maps between wlan devices and network IDs, and contains - the names of all devices that should be initialized by the hotplug - and rc scripts. - -/etc/wlan/wlancfg-* - - These files are per-network configurations. This makes it easy to - switch between different SSIDs and the various settings they may - require, like WEP keys and whatnot. - -The bare minimum you need to do to configure your system after a fresh driver -install: - -0) Nothing whatsoever. out-of-the-box, the driver will attempt to associate - with any access point within range. - -However, we highly recommend setting up a configuration specifically for -your network, using the following method: - -0) This example assumes your network name/SSID is "MyHomeNetwork" -1) cp /etc/wlan/wlancfg-DEFAULT /etc/wlan/wlancfg-MyHomeNetwork -2) edit /etc/wlan/wlan.conf and change the SSID_wlan0 line to: - SSID_wlan0="MyHomeNetwork" -3) edit /etc/wlan/wlancfg-MyHomeNetwork, and make any necessary changes - necessary to support your network, such as WEP and whatnot. - ------------------------------- -FOR PCMCIA USERS: -A) Edit /etc/pcmcia/network.opts file to set up your IP settings. - Note: for a station, the SSID you're connecting to will be appended to the - current pcmcia scheme name. You can use this to have different - IP setups for different wireless LANs you connect to (e.g. home vs. work). - - Note2: This only applies if you are using a stock pcmcia-cs - package. Most (if not all) distros use their own mechanisms for - configuring pcmcia network interfaces, and thus - /etc/pcmcia/network.opts may not even be present. - -B) Restart pcmcia-cs with the command: - - /etc/rc.d/init.d/pcmcia restart - -C) Insert the card. For most cards, a solid LED indicates that the - SSID you specified was found, a bss was joined, and the firmware - completed the authenticate and associate processes. - -D) Run ifconfig and route to determine if your IP and route settings are - listed as you wanted them. It's also a good idea to look at the file - /etc/resolv.conf to see if your nameserver address has been set up - correctly. - ------------------------------- -FOR PCI, PLX, OR USB USERS: -A) You must make sure that the drivers get loaded at boot time and that the - necessary initialization takes place. The simplest way to do this is - to add the following commands to your rc.local file: - - modprobe prism2_pci [or prism2_usb/prism2_plx] - wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable - wlanctl-ng wlan0 lnxreq_autojoin ssid=<your APs SSID> authtype=opensystem - ifconfig wlan0 <yourIP> netmask <yourNetmask> broadcast <yourBroadcast> - route add default gw <yourGateway> - - Also, don't forget to set up your resolv.conf to point at your DNS server. - -B) Alternatively, you can use the rc.wlan script, which ties into the - /etc/wlan/* configuration files mentioned above. - - We currently don't create the softlink from the runlevel directories to - the wlan startup script due to differences in distributions, but the - scripts are redhat-aware, and can be extended to hook into other tools - easily. (patches welcome!) Just make sure it is brought up early in - the process, namely, before the the network interfaces are brought up. - -C) Add an alias for wlan0 in /etc/modules.conf. For example, a usb - interface on wlan0 would be set up as: - - alias wlan0 prism2_usb - - Substitute prism2_plx or prism2_pci as appropriate. - ------------------------------- -FOR USB USERS: - -A) Make sure your kernel usb support is running -B) Plug in the Prism2.x USB device -C) Run 'modprobe prism2_usb prism2_doreset=1' to load the driver into memory. -D) Run 'wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable' to initialize the - driver+MAC functions. -E) Run 'wlanctl-ng wlan0 lnxreq_autojoin ssid=<your ssid> authtype=opensystem' - to enable the MAC in Infrastructure Station mode. -F) Run 'ifconfig wlan0 <your IP address>' - -Or, you can use the provided hotplug scripts, if your distribution has -hotplug support. :) - -IMPORTANT: Due to an issue with some versions of the Prism USB firmware, -the driver usually needs to perform a port reset. - -Some combinations of usb low-level drivers, kernel releases, and -hardware don't like this, and usually end up generating a kernel OOPS. -newer kernels are much better in this regard. In particular, Intel usb -controllers are the most trouble-prone. - -The OOPS is due to bugs in the linux USB core, and newer kernels -(2.4.19 and later) behave much better in this regard. - -However, the good news is that primary firmware 1.1.2 seems to resolve -the need for the port reset to begin with. Contact your vendor to -request this update. - -Also, using the 'Alt. UHCI' controller driver (uhci.o) is broken with -kernels older than 2.4.22 due to a bug in the controller driver. - |