diff options
author | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
---|---|---|
committer | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
commit | c2941a012cbea19073e72af561b37a1255a1fe6c (patch) | |
tree | 168850edb01eea2168329eada8f2025bf3f21e23 /abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug | |
parent | a501f7114b788b2879bab105ed4dcd7ed6a94f39 (diff) | |
download | linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.zip linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.gz linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.bz2 |
Remove wlan-ng26 as the drivers are now in the kernel.
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug')
-rw-r--r-- | abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug | 90 |
1 files changed, 0 insertions, 90 deletions
diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug deleted file mode 100644 index d37c18b..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/doc/config.debug +++ /dev/null @@ -1,90 +0,0 @@ -* doc/config.debug -* -* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -* -------------------------------------------------------------------- -* -* linux-wlan -* -* The contents of this file are subject to the Mozilla Public -* License Version 1.1 (the "License"); you may not use this file -* except in compliance with the License. You may obtain a copy of -* the License at http://www.mozilla.org/MPL/ -* -* Software distributed under the License is distributed on an "AS -* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -* implied. See the License for the specific language governing -* rights and limitations under the License. -* -* Alternatively, the contents of this file may be used under the -* terms of the GNU Public License version 2 (the "GPL"), in which -* case the provisions of the GPL are applicable instead of the -* above. If you wish to allow the use of your version of this file -* only under the terms of the GPL and not to allow others to use -* your version of this file under the MPL, indicate your decision -* by deleting the provisions above and replace them with the notice -* and other provisions required by the GPL. If you do not delete -* the provisions above, a recipient may use your version of this -* file under either the MPL or the GPL. -* -* -------------------------------------------------------------------- -* -* Inquiries regarding the linux-wlan Open Source project can be -* made directly to: -* -* AbsoluteValue Systems Inc. -* info@linux-wlan.com -* http://www.linux-wlan.com -* -* -------------------------------------------------------------------- -* -* Portions of the development of this software were funded by -* Intersil Corporation as part of PRISM(R) chipset product development. -* -* -------------------------------------------------------------------- - -The kernel components of linux-wlan currently have debugging code -that can be enabled via a "make config" option. If debug output -has been compiled into a driver, enable it by setting the value of the -module parameter xxx_debug -where xxx is the name of the component. There are five levels of -debugging (1-5). Here's a summary of the levels and their usage: - 1 - Enables most error messages for exception (but rare) conditions - 2 - Enables more exceptions - 3 - Enables MAC status output - 4 - More status - 5 - Function entry and exit - -The levels are additive. For example, level 3 includes level 3 -messages plus levels 1 and 2. - -To configure p80211.o for debug output, put the following line (with -your own level number) in your modutils configuration file (usually -/etc/conf.modules or /etc/modules.conf): - - options p80211 wlan_debug=2 - -To configure the prism2_cs driver for debug output, put the following -line (with your own level number) in your /etc/pcmcia/config.opts -file: - - module "prism2_cs" opts "prism2_debug=2" - -To configure the PCI, PLX, or USB driver for debug output, put the following -line (with your own level number) in your modutils configuration file (usually -/etc/conf.modules or /etc/modules.conf): - - options prism2_pci prism2_debug=3 - options prism2_plx prism2_debug=3 - options prism2_usb prism2_debug=3 - - -Then configure the collection and display of your kernel output. This -is usually done using syslog. Here are the relevant entries from the -/etc/syslog.conf file on one of our test machines: - -kern.* /var/log/kernel -kern.* /dev/tty9 -*.info;mail.none;news.none;authpriv.none /var/log/messages -*.info;mail.none;news.none;authpriv.none /dev/tty10 - - |