diff options
author | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
---|---|---|
committer | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
commit | c2941a012cbea19073e72af561b37a1255a1fe6c (patch) | |
tree | 168850edb01eea2168329eada8f2025bf3f21e23 /abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base | |
parent | a501f7114b788b2879bab105ed4dcd7ed6a94f39 (diff) | |
download | linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.zip linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.gz linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.bz2 |
Remove wlan-ng26 as the drivers are now in the kernel.
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base')
-rw-r--r-- | abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base | 738 |
1 files changed, 0 insertions, 738 deletions
diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base deleted file mode 100644 index 5d84bb8..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/etc/wlan/.svn/text-base/shared.svn-base +++ /dev/null @@ -1,738 +0,0 @@ -#!/bin/bash -# etc/wlan/shared -# -# Copyright (C) 2002 AbsoluteValue Systems, Inc. All Rights Reserved. -# -------------------------------------------------------------------- -# -# linux-wlan -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU Public License version 2 (the "GPL"), in which -# case the provisions of the GPL are applicable instead of the -# above. If you wish to allow the use of your version of this file -# only under the terms of the GPL and not to allow others to use -# your version of this file under the MPL, indicate your decision -# by deleting the provisions above and replace them with the notice -# and other provisions required by the GPL. If you do not delete -# the provisions above, a recipient may use your version of this -# file under either the MPL or the GPL. -# -# -------------------------------------------------------------------- -# -# Inquiries regarding the linux-wlan Open Source project can be -# made directly to: -# -# AbsoluteValue Systems Inc. -# info@linux-wlan.com -# http://www.linux-wlan.com -# -# -------------------------------------------------------------------- -# -# Portions of the development of this software were funded by -# Intersil Corporation as part of PRISM(R) chipset product development. -# -# -------------------------------------------------------------------- - -TMPDIR=/tmp - -if [ ! -n "$ECHO" ]; then - ECHO=echo -fi - -if [ ! -n "$WLAN_UDEV" ] ; then -if [ -x /sbin/modprobe ] ; then - MODPROBE=/sbin/modprobe -else - ${ECHO} "/sbin/modprobe not found." - exit 1 -fi -fi - -if [ -x /sbin/wlanctl-ng ] ; then - WLANCTL=/sbin/wlanctl-ng -else - ${ECHO} "/sbin/wlanctl-ng not found." - exit 1 -fi - -# linux-wlan-ng > 0.2.4 there is no wland -#if [ -x /sbin/wland ] ; then -# WLAND=/sbin/wland -#else -# ${ECHO} "/sbin/wland not found." -# exit 1 -#fi - -if [ -z "$WLAN_UDEV" ] ; then - HAS_HOTPLUG=n - if [ -f /proc/sys/kernel/hotplug -a \ - -f /etc/hotplug/wlan.agent ] ; then - HOTPLUGGER=$(</proc/sys/kernel/hotplug) - if [ -n "$HOTPLUGGER" ] ; then - if [ -x $HOTPLUGGER ] ; then - HAS_HOTPLUG=y - fi - fi - fi -fi - -# Source the wlan configuration -if [ -f /etc/wlan/wlan.conf ] ; then - . /etc/wlan/wlan.conf -else - ${ECHO} "/etc/wlan/wlan.conf not found." - exit 0 -fi - -# Source NSD specific functions -# nsd_fwload -# nsd_mibset -# Debian mod. If there is shared.dpkg-old we get a endless loop -if [ "`ls /etc/wlan/shared.* 2>/dev/null`" ]; then - for i in `find /etc/wlan -name 'shared.*' -a ! -name '*.dpkg*'` ; do - . $i - done -else - ${ECHO} "/etc/wlan/shared.* not found." - exit 0 -fi - -is_true () -{ - # $1 == string containing a t/f indicator. - - [ "$1" = "y" -o "$1" = "Y" -o "$1" = "yes" -o "$1" = "YES" \ - -o "$1" = "t" -o "$1" = "T" -o "$1" = "true" -o "$1" = "TRUE" ] -} - -wlan_nsdname () -{ - # $1 == wlandev - # Writes the given device's name to stdout - grep 'nsd name' /proc/net/p80211/$1/wlandev | sed -e 's/.*: \(.*\)_.*/\1/' -} - -wlan_enable () -{ - # $1 == wlandev - - #=======ENABLE IFSTATE============================= - # Bring the device into its operable state - - # if running under udev module must be loaded to get here so skip checks - if [ ! -n "$WLAN_UDEV" ] ; then - - $MODPROBE $1 - - # First, make sure the driver is loaded.... - if ! ifconfig $1 > /dev/null 2>&1 ; then - ${ECHO} "Error: Device $1 does not seem to be present." - ${ECHO} "Make sure you've inserted the appropriate" - ${ECHO} "modules or that your modules.conf file contains" - ${ECHO} "the appropriate aliase(s)." - return 1 - fi - fi - # Call the nsd script's fwload function, in case the card needs - # a firmware load, or could use an optional one. - - nsdname=`wlan_nsdname $1` - if ! ${nsdname}_fwload $1 ; then - ${ECHO} "Firmware failed to load for device $1" - return 1 - fi - - # Enable the interface - result=`$WLANCTL $1 lnxreq_ifstate ifstate=enable` - if [ $? = 0 ] ; then - eval $result - if [ $resultcode != "success" ]; then - ${ECHO} "Failed to enable the device, resultcode=" \ - $resultcode "." - return 1 - fi - else - ${ECHO} "Failed to enable the device, exitcode=" $? "." - return 1 - fi - - # Set any NSD specific MIBs - ${nsdname}_mibset $1 -} - -wlan_user_mibs () -{ - # $1 == wlandev - - #=======USER MIB SETTINGS============================= - # Set the user specified MIB items. - for i in $USER_MIBS ; do - result=`$WLANCTL $1 dot11req_mibset "mibattribute=$i"` - if [ $? = 0 ] ; then - eval $result - if [ $resultcode != "success" ] ; then - ${ECHO} "Failed to set user MIB $i." - return 1 - fi - else - ${ECHO} "Failed to set user MIB $i." - return 1 - fi - done -} - -wlan_source_config () -{ - # $1 == wlandev - - # XXX what about stray singlequotes. - eval 'GOSSID="$SSID_'$1'"' - wlan_source_config_for_ssid "$GOSSID" -} - -wlan_source_config_for_ssid () -{ - # $1 == ssid[:bssid] - # $2 == bssid (optional) - - DesiredSSID="$1" - DesiredBSSID="$2" - - if [ -n "$2" ] ; then - token_ssid=`echo $1 | sed -ne 's/\(.*\)\(:..:..:..:..:..:..\).*/\1/p'` - token_bssid=`echo $1 | sed -ne 's/\(.*\):\(..:..:..:..:..:..\).*/\2/p'` - if [ -n "$token_ssid" ] ; then - DesiredSSID="$token_ssid" - DesiredBSSID="$token_bssid" - fi - - fi - - if [ -f "/etc/wlan/wlancfg-$DesiredSSID:$DesiredBSSID" ] ; then - . "/etc/wlan/wlancfg-$DesiredSSID:$DesiredBSSID" - elif [ -f "/etc/wlan/wlancfg-$DesiredSSID" ] ; then - . "/etc/wlan/wlancfg-$DesiredSSID" - else - - if [ -n "$1" ] ; then - ${ECHO} "Failed to open network config file /etc/wlan/wlancfg-$1, using default." - fi - - . "/etc/wlan/wlancfg-DEFAULT" - fi -} - -wlan_disable () -{ - # $1 == wlandev - - $WLANCTL $1 lnxreq_ifstate ifstate=disable -} - -wlan_ssid_in_list () -{ - # $1 == wlandev, $2 == ssid, $3 == bssid - - eval 'GOSSID="$SSID_'$1'"' - - # This "eval" hackery is to allow escapes in GOSSID... - cmd="for token in $GOSSID ; do - ssid_token=\`echo \"\$token\" | sed -ne 's/\(.*\)\(:..:..:..:..:..:..\).*/\1/p'\` - bssid_token=\`echo \"\$token\" | sed -ne 's/\(.*\):\(..:..:..:..:..:..\).*/\2/p'\` - - if [ -z \"\$ssid_token\" ] ; then - ssid_token="\$token" - fi - - if [ -n \"\$bssid_token\" ] ; then - if [ \"\$bssid_token\" = \"\$3\" ] ; then - return 0 - fi - elif [ \"\$2\" = \"\$ssid_token\" ] ; then - return 0 - fi - done" - eval "$cmd" - - return 1 -} - -wlan_supports_scan () -{ - # $1 == wlandev - - if is_true "$WLAN_SCAN" ; then - cat /proc/net/p80211/$1/wlandev | grep 'scan' > /dev/null - if [ $? = 0 ] ; then - return 0 - fi - fi - return 1 -} - -wlan_scan () -{ - # $1 == wlandev - - # find our allowed SSID list. - - # XXX what about stray singlequotes. - eval 'GOSSID="$SSID_'$1'"' - - # kick off a quick scan with the broadcast SSID. - wlan_scan_one $1 '' '' n - if [ $? = 0 -a \ - "$GOSSID" = "" ] ; then - # if successful and our ssid list is null, return. - sleep 1 - return 0 - fi - - # otherwise we walk through the list, and scan for eacn in turn. - # this "eval" hackery is to allow escapes in GOSSID - cmd="for token in $GOSSID ; do - ssid_token=\`echo \"\$token\" | sed -ne 's/\(.*\)\(:..:..:..:..:..:..\).*/\1/p'\` - bssid_token=\`echo \"\$token\" | sed -ne 's/\(.*\):\(..:..:..:..:..:..\).*/\2/p'\` - - if [ -z \"\$ssid_token\" ] ; then - ssid_token=\"\$token\" - fi - - wlan_scan_one \$1 \"\$ssid_token\" \"\$bssid_token\" - if [ \$? = 0 ] ; then - sleep 1 - return 0 - fi - done" - eval "$cmd" - - # We got to the end of the list. Maybe try "any" - if is_true "$WLAN_ANY" ; then - wlan_scan_one $1 - sleep 1 - return $? - fi - - sleep 1 - return 1 -} - - -wlan_scan_one () -{ - # $1 == wlandev, [ $2 == ssid, $3 == bssid, $4 == append ] - - if [ -z "$4" ] ; then - append=true - else - append=false - fi - - numbss=0 - - result=`$WLANCTL $1 dot11req_scan bsstype=any bssid=ff:ff:ff:ff:ff:ff \ - scantype=active probedelay=0 channellist=$ChannelList ssid="$2" \ - minchanneltime=$ChannelMinTime maxchanneltime=$ChannelMaxTime append=$append` - eval $result - if [ $resultcode != 'success' ] ; then - ${ECHO} "Scan failed ($resultcode) " - return 1 - fi - - ## XXX if numbss == 0, repeat with $2 $3 $4? - - i=0 - bssfound="" - - # walk through the results and do first-cut matching. - while [ $i -lt $numbss ] ; do - result=`$WLANCTL $1 dot11req_scan_results bssindex=$i` - eval $result - - if [ -n "$3" ] ; then - if [ "$3" = "$bssid" ] ; then - bssfound="$bssfound $i" - fi - elif [ -z "$2" ] ; then - # if our ssid is "", then we pick the first entry. - bssfound="$bssfound $i" - elif [ "$2" = "$ssid" ] ; then - bssfound="$bssfound $i" - fi - i=`expr $i + 1` - done - - if [ -z "$bssfound" ]; then # No BSSs found, bail. - return 1 - else - # Now find the closest - bigsignal=0 - for i in $bssfound ; do - result=`$WLANCTL $1 dot11req_scan_results bssindex=$i` - eval $result - if [ $bigsignal -lt $signal ]; then - bigsignal=$signal - bigbssindex=$i - fi - done - result=`$WLANCTL $1 dot11req_scan_results bssindex=$bigbssindex` - eval $result - return 0 - fi -} - -wlan_wep () -{ - # $1 == wlandev - - #=======WEP=========================================== - # Setup privacy - if [ ${dot11PrivacyInvoked:-"false"} = "false" ] ; then - return 0; - fi - - result=`$WLANCTL $1 dot11req_mibget mibattribute=dot11PrivacyOptionImplemented` - if [ $? = 0 ] ; then - eval $result - eval $mibattribute - else - ${ECHO} "dot11PrivacyOptionImplemented mibget failed." - return 1 - fi - - if [ $dot11PrivacyOptionImplemented = "false" ] ; then - ${ECHO} "Cannot enable privacy, dot11PrivacyOptionImplemented=false." - return 1 - fi - - # Do we want host-based WEP? - result=`$WLANCTL $1 lnxreq_hostwep \ - decrypt="${lnxreq_hostWEPDecrypt:-false}" \ - encrypt="${lnxreq_hostWEPEncrypt:-false}"` - - # set up the rest of the parametsrs. - if [ $dot11PrivacyOptionImplemented = "true" -a \ - $dot11PrivacyInvoked = "true" ] ; then - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKeyID=$dot11WEPDefaultKeyID ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11ExcludeUnencrypted=$dot11ExcludeUnencrypted ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11PrivacyInvoked=$dot11PrivacyInvoked` - if [ "${PRIV_GENSTR:-empty}" != "empty" ] ; then - if [ ${PRIV_KEY128:-"false"} = "false" ]; then - keys=`$PRIV_GENERATOR "$PRIV_GENSTR" 5` - else - keys=`$PRIV_GENERATOR "$PRIV_GENSTR" 13` - fi - knum=0 - for i in $keys ; do - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKey$knum=$i` - knum=`expr $knum + 1` - done - else - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKey0=$dot11WEPDefaultKey0 ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKey1=$dot11WEPDefaultKey1 ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKey2=$dot11WEPDefaultKey2 ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11WEPDefaultKey3=$dot11WEPDefaultKey3 ` - fi - else - # disable wep explicitly. - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11PrivacyInvoked=$dot11PrivacyInvoked ` - result=`$WLANCTL $1 dot11req_mibset \ - mibattribute=dot11ExcludeUnencrypted=false ` - fi -} - -wlan_adhoc () -{ - # $1 == wlandev - - #=======IBSS STARTUP================================== - startcmd="$WLANCTL $1 dot11req_start " - startcmd="$startcmd ssid=$DesiredSSID" - startcmd="$startcmd bsstype=independent" - startcmd="$startcmd beaconperiod=$BCNINT" - startcmd="$startcmd dtimperiod=3" - startcmd="$startcmd cfpollable=false" - startcmd="$startcmd cfpollreq=false" - startcmd="$startcmd cfpperiod=3" - startcmd="$startcmd cfpmaxduration=100" - startcmd="$startcmd probedelay=100" - startcmd="$startcmd dschannel=$CHANNEL" - j=1 - for i in $BASICRATES ; do - startcmd="$startcmd basicrate$j=$i" - j=`expr $j + 1` - done - - j=1 - for i in $OPRATES ; do - startcmd="$startcmd operationalrate$j=$i" - j=`expr $j + 1` - done - - results=`$startcmd` # Here's where it runs - if [ $? = 0 ]; then - eval $results - if [ $resultcode != "success" ] ; then - ${ECHO} "IBSS not started, resultcode=$resultcode" - exit 1 - else - ${ECHO} "IBSS mode started." - fi - else - ${ECHO} FAILED: $startcmd - return 1 - fi - WLAN_SCHEMESSID="$DesiredSSID" -} - -wlan_infra () -{ - # $1 == wlandev - - #==== INFRASTRUCURE STARTUP=========================== - # XXX TODO: Grok DesiredBSSID - - sleep 5 - results=`$WLANCTL $1 lnxreq_autojoin \ - "ssid=$DesiredSSID" \ - authtype=${AuthType:="opensystem"} | sed 's/\([^=]*\)=\(.*\)/\1="\2"/'` - eval $results - if [ ${resultcode:-"failure"} != "success" ] ; then - ${ECHO} 'error: Autojoin indicated failure!' - return 1; - fi - - WLAN_SCHEMESSID="$DesiredSSID" -} - -wlan_dot11_join () -{ - # $1 == wlandev - - joincmd="$WLANCTL $1 dot11req_join bssid=$DesiredBSSID" - joincmd="$joincmd joinfailuretimeout=1" - - j=1 - for i in $OPRATES ; do - joincmd="$joincmd operationalrate$j=$i" - j=`expr $j + 1` - done - - results=`$joincmd` - - eval $results - if [ ${resultcode:-"failure"} != "success" ] ; then - ${ECHO} "$1: JOIN Failure" - ${ECHO} "joincmd=$joincmd" - ${ECHO} "results=$results" - return 1; - fi -} - -wlan_dot11_auth_assoc () -{ - # $1 == wlandev - if [ $bsstype = "infrastructure" ] ; then - results=`$WLANCTL $1 dot11req_authenticate \ - peerstaaddress=$DesiredBSSID \ - authenticationtype=$AuthType \ - authenticationfailuretimeout=2000` - eval $results - if [ ${resultcode:-"failure"} != "success" ] ; then - ${ECHO} "error: dot11req_authenticate failed, "\ - "resultcode=$resultcode" - return 1; - fi - results=`$WLANCTL $1 dot11req_associate \ - listeninterval=1000 \ - associatefailuretimeout=2000 ` - if [ ${resultcode:-"failure"} != "success" ] ; then - ${ECHO} 'error: dot11req_associate failed!' - return 1; - fi - fi -} - -wlan_set_ssid_schemefile () -{ - # $1 == SSID - - # Find the scheme file - if [ -r /var/lib/misc/pcmcia-scheme ] ; then - # Debian - WLAN_SCHEMEFILE="/var/lib/misc/pcmcia-scheme" - elif [ -d /var/state/pcmcia ] ; then - WLAN_SCHEMEFILE="/var/state/pcmcia/scheme" - elif [ -d /var/lib/pcmcia ] ; then - WLAN_SCHEMEFILE="/var/lib/pcmcia/scheme" - else - WLAN_SCHEMEFILE="/var/run/pcmcia-scheme" - fi - - # Collect the current scheme name and save the file - if [ -r $WLAN_SCHEMEFILE ] ; then - WLAN_SCHEME=`cat $WLAN_SCHEMEFILE` - cp $WLAN_SCHEMEFILE /var/run/wlan_scheme_`date +"%T"`.tmp - else - touch /var/run/wlan_scheme_`date +"%T"`.tmp - - fi - - # Set up the <scheme:SSID> string - if [ ! "$WLAN_SCHEME" ] ; then - WLAN_SCHEME="default" - fi - WLAN_SCHEME="$WLAN_SCHEME:$1" - - # Write to schemefile - echo $WLAN_SCHEME > $WLAN_SCHEMEFILE -} - -wlan_restore_schemefile () -{ - # Find the scheme file - if [ -r /var/lib/misc/pcmcia-scheme ] ; then - # Debian - WLAN_SCHEMEFILE="/var/lib/misc/pcmcia-scheme" - elif [ -d /var/state/pcmcia ] ; then - WLAN_SCHEMEFILE="/var/state/pcmcia/scheme" - elif [ -d /var/lib/pcmcia ] ; then - WLAN_SCHEMEFILE="/var/lib/pcmcia/scheme" - else - WLAN_SCHEMEFILE="/var/run/pcmcia-scheme" - fi - - TMPFILE=`ls /var/run/wlan_scheme*.tmp | tail -n 1` - - if [ -r $TMPFILE ] ; then - cat $TMPFILE > $WLAN_SCHEMEFILE - rm -f $TMPFILE - else - ${ECHO} "wlan_restore_schemefile: No wlan_scheme\*.tmp file found." - fi -} - -wlan_bring_it_up () -{ - # $1 == wlandev - # $2 == non-null if wext enabled. - - #=======ENABLE======================================== - # Do we want to init the card at all? - eval 'WLAN_ENABLE=$ENABLE_'$1 - - if ! is_true $WLAN_ENABLE ; then - return 1 - fi - - if wlan_enable $1 ; then - if [ -z "$2" ] ; then - wlan_scan_and_join $1 - return $? - else - ${ECHO} "Bypassing configuration due to wireless extensions" - fi - else - return 1; - fi - - return 1 -} - -wlan_scan_and_join () -{ - #=======MAC STARTUP========================================= - wlan_supports_scan $1 - if [ $? = 0 ] ; then - wlan_scan $1 - if [ $? = 0 ] ; then - wlan_source_config_for_ssid "$ssid" "$bssid" - - wlan_user_mibs $1 - wlan_wep $1 - - wlan_join $1 - else - if is_true $IS_ADHOC ; then - # start an IBSS; we didn't find one. - wlan_adhoc $1 - else - return 1 - fi - fi - else - wlan_source_config $1 - - wlan_user_mibs $1 - wlan_wep $1 - - if is_true $IS_ADHOC ; then - wlan_adhoc $1 - else - wlan_infra $1 - fi - fi - - return $? -} - -wlan_join () -{ - # $1 == wlandev - grep 'autojoin' /proc/net/p80211/$1/wlandev > /dev/null - if [ $? = 0 ]; then - wlan_infra $1 - else - wlan_dot11_join $1 - wlan_dot11_auth_assoc $1 - fi -} - -tmpname () -{ - # $1 == prefix - local i=0 - local tname=$TMPDIR/${1}_$$ - if [ -f ${tname}.tmp ] ; then - for i in 0 1 2 3 4 5 6 7 8 9 ; do - if [ ! -f ${tname}_${i}.tmp ] ; then - echo ${tname}_${i}.tmp - return 0 - fi - done - else - echo ${tname}.tmp - fi - return 0 -} - -source_procfile () -{ - # $1 == procfile to source - local fname=`tmpname wlan_procfile` - cat "$1" > $fname - . $fname - rm -f $fname -} - -# This is set by the Configure script as part of 'make install' -#FIRMWARE_DIR="/usr/share/linux-wlan" |