diff options
author | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
---|---|---|
committer | James Meyer <james.meyer@operamail.com> | 2009-03-14 04:07:05 (GMT) |
commit | c2941a012cbea19073e72af561b37a1255a1fe6c (patch) | |
tree | 168850edb01eea2168329eada8f2025bf3f21e23 /abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base | |
parent | a501f7114b788b2879bab105ed4dcd7ed6a94f39 (diff) | |
download | linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.zip linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.gz linhes_pkgbuild-c2941a012cbea19073e72af561b37a1255a1fe6c.tar.bz2 |
Remove wlan-ng26 as the drivers are now in the kernel.
Diffstat (limited to 'abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base')
6 files changed, 0 insertions, 267 deletions
diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/Makefile.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/Makefile.svn-base deleted file mode 100644 index 4b68c73..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/Makefile.svn-base +++ /dev/null @@ -1,57 +0,0 @@ -# man/Makefile -# -# Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. -# -------------------------------------------------------------------- -# -# linux-wlan -# -# The contents of this file are subject to the Mozilla Public -# License Version 1.1 (the "License"); you may not use this file -# except in compliance with the License. You may obtain a copy of -# the License at http://www.mozilla.org/MPL/ -# -# Software distributed under the License is distributed on an "AS -# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or -# implied. See the License for the specific language governing -# rights and limitations under the License. -# -# Alternatively, the contents of this file may be used under the -# terms of the GNU Public License version 2 (the "GPL"), in which -# case the provisions of the GPL are applicable instead of the -# above. If you wish to allow the use of your version of this file -# only under the terms of the GPL and not to allow others to use -# your version of this file under the MPL, indicate your decision -# by deleting the provisions above and replace them with the notice -# and other provisions required by the GPL. If you do not delete -# the provisions above, a recipient may use your version of this -# file under either the MPL or the GPL. -# -# -------------------------------------------------------------------- -# -# Inquiries regarding the linux-wlan Open Source project can be -# made directly to: -# -# AbsoluteValue Systems Inc. -# info@linux-wlan.com -# http://www.linux-wlan.com -# -# -------------------------------------------------------------------- -# -# Portions of the development of this software were funded by -# Intersil Corporation as part of PRISM(R) chipset product development. -# -# -------------------------------------------------------------------- - --include ../config.mk - -all: - @echo "Nothing to do..." - -install: - mkdir -p $(TARGET_ROOT_ON_HOST)/usr/local/man/man1 - cp *.1 $(TARGET_ROOT_ON_HOST)/usr/local/man/man1 - -clean: - rm -f core core.* *.o .*.o *.s *.a .depend tmp_make *~ tags - for i in *_obj; do if [ -d $$i ]; then rm -fr $$i; fi; done - diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/nwepgen.1.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/nwepgen.1.svn-base deleted file mode 100644 index 5c803ed..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/nwepgen.1.svn-base +++ /dev/null @@ -1,13 +0,0 @@ -.TH NWEPGEN 8 -.SH NAME -nwepgen \- generates Neesus Datacom compatible WEP keys -.SH SYNOPSIS -.B nwepgen genstr length -.SH DESCRIPTION -.B nwepgen -generates Neesus Datacom compatible WEP keys from a string. You will -typically not run it by hand, but it is called by the linux-wlan-ng -initialization scripts if you specify a WEP key string in the config file. -.P -.SH AUTHOR -This minimal man page was written by Joey Hess. diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/prism2dl.1.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/prism2dl.1.svn-base deleted file mode 100644 index 0f4758d..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/prism2dl.1.svn-base +++ /dev/null @@ -1,93 +0,0 @@ -.TH PRISM2DL 8 -.SH NAME -prism2dl \- 802.11 frame dump utility -.SH SYNOPSIS -.B prism2dl [OPTIONS] devname -.SH DESCRIPTION -.B prism2dl -User utility for downloading prism2 images -.SH OPTIONS -.TP -.B -s (status) -Show CIS, PDA from card and exit -.TP -.B -v (verbose) -Show more status info during operation -.TP -.B -V (Version) -Show version and exit -.TP -.B -n (nowrite) -Do all processing, including card PDA read but do not write to card -.TP -.B -d (debug) -Do all processing, excluding card PDA read but do not write to card. A valid -interface name is _not_ required for this mode. -.TP -.B -g (generate) -Show the PDA in a format readable by this program. Useful for saving the -existing from a card. -.SH IMAGEFILE OPTIONS -.TP -.B -r <file> (ram) -Load SREC file to card RAM. This option may be specified multiple times. -If the value is "stdin", the file will be read from stdin and the option -may only be specified once. -.TP -.B -f <file> (flash) -Load SREC file to card FLASH. This option may be specified multiple times. -If the value is "stdin", the file will be read from stdin and the option -may only be specified once. -.SH PDA OPTIONS -.TP -.B -a <file> (addpdr) -Add the PDRs from file to the PDA from card. This option may be specified -multiple times. -.TP -.B -p <file> (pda) -Replace the card PDA with the contents of file. -.TP -.B -m <haddr> (macaddr) -Overwrite the MAC address PDR with the given value. -<addr> ::= xx:xx:xx:xx:xx:xx, where xx is a two digit hex number. -.TP -.B -S <str> (Sernum) -Overwrite the serial number PDR with the given string. String must be <= 12 -characters, any extra will be truncated. -.TP -.B -l <adrr> (padloc) -PDA location in card memory. Commonly values: - HFA3841 ==> 0x003f0000 - HFA3842 ==> 0x007f0000 -.TP -.B devname -Linux device name (e.g. eth0, wlan0) -.SH EXAMPLES -Review card status: - prism2dl -s wlan0 - -Load a new PDA: - prism2dl -p pdafile.txt wlan0 - or - prism2dl -p pdafile.txt -a pda1.txt -a pda2.txt wlan0 - - Note that the f/w images will most likely contain bogus plug info after - rewriting the PDA by itself. It is generally recommended to reload the - primage and secondary images at the same time as modifying the PDA. - -Load a FLASH image _and_ PDA: - prism2dl -p pdafile.txt -f CIS.hex -f primary.hex -f secondary.hex wlan0 - -Load a RAM image: - prism2dl -a pda1.txt -r tertiary.hex - -Note: PDA records are additive starting with the records from the card - OR the records from the -p specified file. -a specified file(s) - overwrite, append, or remove records one at a time. If multiple - files are specified using the -a option, the files are processed - from left to right. This implies that a record removed from the - current working PDA may then be added again by a record that - appears after the "remove" record in the file set. -.P -.SH AUTHOR -This minimal man page was written by Victor Seva. diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlancfg.1.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlancfg.1.svn-base deleted file mode 100644 index 257ccd8..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlancfg.1.svn-base +++ /dev/null @@ -1,54 +0,0 @@ -.TH WLANCFG 8 -.SH NAME -wlancfg \- manupulate linux-wlan-ng MIB values -.SH SYNOPSIS -.B wlancfg query dev -.P -.B wlancfg show dev [all] -.P -.B wlancfg set dev -.P -.B wlancfg list -.P -.B wlancfg version -.SH DESCRIPTION -The wlancfg utility program provides an alternative method to -.B wlanctl-ng (1) -, for manipulating MIB values. It was designed to provide -an easier mechanism for saving and restoring the complete wireless -configuration (i.e. when re-starting the device driver) and to provide -a more efficient mechanism for GUI's to query multiple MIB's. -.SH OPTIONS -.TP -.B dev -The name of the device (e.g., wlan0). -.TP -.B query -Read MIB names (separated by whitespace) from stdin -and output their values (separated by carriage returns) -to stdout. The MIB's may be either read/write or -read-only. -.TP -.B show -Query the values of all supported read/write MIB's and -output their values (separated by carriage returns) to -stdout. The syntax of the output will be: - name=value -.RS -If the "all" parameter is specified, then all supported -MIB's (i.e. read-only MIB's as well) are output. -.RE -.TP -.B set -Read MIB name/value pairs (separated by carriage returns) -from stdin and set the values of the specified MIB's. The -pairs must have the same syntax as above. The MIB's must -be read/write. -.TP -.B list -Display a list of all supported MIB's. -.TP -.B version -Display the compiled version of wlancfg. -.SH AUTHOR -This minimal man page was written by Joey Hess. diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlanctl-ng.1.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlanctl-ng.1.svn-base deleted file mode 100644 index 4c6186a..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wlanctl-ng.1.svn-base +++ /dev/null @@ -1,27 +0,0 @@ -.TH WLANCTL-NG 8 -.SH NAME -wlanctl-ng \- control utility for linux-wlan-ng 802.11 devices -.SH SYNOPSIS -.B wlanctl-ng interface|verson|commands|mibs cmd cmdarg [cmdarg..] -.SH DESCRIPTION -The wlanctl-ng utility program is used to set up linux-wlan-ng 802.11 -devices. linux-wlan-ng devices are configured using a MIB. -.P -Only experts will want to use this program, as it is quite complicated. -Everyone else edits a config file and uses a script that runs this program -as necessary. -.SH OPTIONS -.TP -.B commands -Output a list of all available commands. -.TP -.B mibs -Outputs a list of available mibs. -.TP -.B version -Outputs the version of the program. -.TP -.B interface -The name of a wireless network interface, such as wlan0. -.SH AUTHOR -This minimal man page was written by Joey Hess. diff --git a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wland.1.svn-base b/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wland.1.svn-base deleted file mode 100644 index 02250e1..0000000 --- a/abs/core-testing/wlan-ng26-utils-svn/tmp/trunk/man/.svn/text-base/wland.1.svn-base +++ /dev/null @@ -1,23 +0,0 @@ -.TH WLAND 8 -.SH NAME -wland \- linux-wlan-ng daemon -.SH SYNOPSIS -.B wland [-V|-v] [-d wlandpath] [-u] -.SH DESCRIPTION -.B wland -is a daemon for receiving and handling events from 802.11 services and -MAC-specific linux-wlan-ng drivers. It is not currently used. -.SH OPTIONS -.TP -.B -V -.TP -.B -v -Display version number. -.TP -.B -d wlandpath -Specify the directory to run in. -.TP -.B -u -Do not daemonize; run in foreground. -.SH AUTHOR -This minimal man page was written by Joey Hess. |