Merge branch 'testing'

# By James Meyer (1091) and others
# Via James Meyer (5) and others
* testing: (1148 commits)
  LinHES-config: during install don't kill off lirc.  This keeps the remote active all the way to the finish
  Change version numbers to 8.0  to match the release number. LinHES-conifg LinHES-system mythdb-initial runit-scripts supplemental-web
  LinHES-conifig: mv_install.py  for the last partition don't go all the way to the end.  Gotta leave room for gpt tables.
  xf86-video-ati: xorg ati driver.
  LinHES-config: timezip.py  add syncing up of parental lvl passwords and starting level with MBE.
  LinHES-system: correct the logic for breaking out of the wmctrl loop.   As written it would break out of the inner loop..but not the 60 iteration loop.
  e16_theme_settings:  remove slide-in prop for new windows.   For whatever reason this was preventing mplayer from being positioned correctly for appletrailers.
  LinHES-config, mythinstall:  change  case of hd_pvr and   serial to all lower refs #902
  zilog-firmware:   firmware for TX support of the hdpvr and pvr-150 In general I can't recommend anybody using these transmitters  but including the firmware just in case someone really wants to
  linhes-udev-rules:  added hdprv_lirc rule. All of these lirc rules are limited to exactly one device.  If more then one device is present then only the last device in init will get the symlink
  runit-scripts:  fix logging for igdeamon,   add support to remote init script so that the blaster is always the first device in the chain. added support specificly for hd_pvr
  LinHES-system:   add lh_system_restore and lh_system_backup.  These scripts are called from the mythmenu. refs #900
  iguanair: rebuild with python 2.7
  LinHES-system: msg_daemon.py fix  init and nasty bug related to timeout. In a nutshell timeout wouldn't work unless a msg without a timeout was called first.
  linhes-udev-rules:  add rules for mce,streamzap,serial  lirc devices.
  mythinstall: recompile for matching libs
  mythtv:  latest .25-fixes  and change mythbackup/restore call lh_system_$op   to replace mythbackup/mythrestore.  mythbackup no longer works correctly with the new windowmanager
  linhes-scripts: myth2mp3, myth2x264, myth2xvid: use mythutil to get cutlist
  LinHES-config, supplimental-web:  Fix proxy numbering for Ceton infiniTV
  linhes-system:  add additional stuff to the system backup and also introduced an exclude file. The exclude/include files are locate in /home/mythtv/backup_config/
  ...

6 files changed, 132 insertions, 15 deletions

diff --git a/abs/core/dhcpcd/0001-Set-hostname-via-proc-if-file-is-available.patch b/abs/core/dhcpcd/0001-Set-hostname-via-proc-if-file-is-available.patch
new file mode 100644
index 0000000..4420d0b
--- /dev/null
+++ b/abs/core/dhcpcd/0001-Set-hostname-via-proc-if-file-is-available.patch
@@ -0,0 +1,33 @@
+From d345b36b483fec8fb2def5f3acdc2d3c5faa94eb Mon Sep 17 00:00:00 2001
+From: Dan McGee <dan@archlinux.org>
+Date: Sun, 19 Jun 2011 16:04:25 -0500
+Subject: [PATCH] Set hostname via /proc if file is available
+
+On Linux, the hostname can be set via this file if available, precluding
+the need for a `hostname` binary.
+
+Signed-off-by: Dan McGee <dan@archlinux.org>
+---
+ dhcpcd-hooks/30-hostname |    6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletions(-)
+
+diff --git a/dhcpcd-hooks/30-hostname b/dhcpcd-hooks/30-hostname
+index 65d1a13..af94262 100644
+--- a/dhcpcd-hooks/30-hostname
++++ b/dhcpcd-hooks/30-hostname
+@@ -21,7 +21,11 @@ need_hostname()
+ try_hostname()
+ {
+ 	if valid_domainname "$1"; then
+-		hostname "$1"
++		if [ -w /proc/sys/kernel/hostname ]; then
++			echo "$1" > /proc/sys/kernel/hostname
++		else
++			hostname "$1"
++		fi
+ 	else
+ 		syslog err "Invalid hostname: $1"
+ 	fi
+-- 
+1.7.5.4
+
diff --git a/abs/core/dhcpcd/0001-set-MTU-via-sysfs-if-file-is-available.patch b/abs/core/dhcpcd/0001-set-MTU-via-sysfs-if-file-is-available.patch
new file mode 100644
index 0000000..7e78ecd
--- /dev/null
+++ b/abs/core/dhcpcd/0001-set-MTU-via-sysfs-if-file-is-available.patch
@@ -0,0 +1,61 @@
+From 950c00d1b183796034d227ef47a90eb248d79b72 Mon Sep 17 00:00:00 2001
+From: Dave Reisner <d@falconindy.com>
+Date: Tue, 21 Jun 2011 09:32:47 -0400
+Subject: [PATCH] set MTU via sysfs if file is available
+
+On Linux, a network interface's MTU can be set by writing to
+/sys/class/net/$interface/mtu, which removes the dependency on ifconfig.
+
+Signed-off-by: Dave Reisner <d@falconindy.com>
+---
+ dhcpcd-hooks/10-mtu |    4 ++--
+ dhcpcd-run-hooks.in |   11 +++++++++++
+ 2 files changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/dhcpcd-hooks/10-mtu b/dhcpcd-hooks/10-mtu
+index 639697c..8763930 100644
+--- a/dhcpcd-hooks/10-mtu
++++ b/dhcpcd-hooks/10-mtu
+@@ -7,7 +7,7 @@ if [ "$reason" = PREINIT -a -e "$mtu_dir/$interface" ]; then
+ elif [ -n "$new_interface_mtu" ] && $if_up; then
+ 	# The smalled MTU dhcpcd can work with is 576
+ 	if [ "$new_interface_mtu" -ge 576 ]; then
+-		if ifconfig "$interface" mtu "$new_interface_mtu"; then
++		if set_mtu "$interface" "$new_interface_mtu"; then
+ 			syslog info "$interface: MTU set to $new_interface_mtu"
+ 			# Save the MTU so we can restore it later
+ 			if [ ! -e "$mtu_dir/$interface" ]; then
+@@ -21,7 +21,7 @@ elif [ -e "$mtu_dir/$interface" ]; then
+ 		# No MTU in this state, so restore the prior MTU
+ 		mtu=$(cat "$mtu_dir/$interface")
+ 		syslog info "$interface: MTU restored to $mtu"
+-		ifconfig "$interface" mtu "$mtu"
++		set_mtu "$interface" "$mtu"
+ 		rm "$mtu_dir/$interface"
+ 	fi
+ fi
+diff --git a/dhcpcd-run-hooks.in b/dhcpcd-run-hooks.in
+index 0e60338..843f3ca 100644
+--- a/dhcpcd-run-hooks.in
++++ b/dhcpcd-run-hooks.in
+@@ -215,6 +215,17 @@ service_condcommand()
+ 	service_exists $1 && service_status $1 && service_cmd $1 $2
+ }
+ 
++# Set MTU for an interface
++set_mtu() {
++	local interface=$1 mtu=$2
++
++	if [ -e /sys/class/net/$interface/mtu ]; then
++		echo "$mtu" > /sys/class/net/$interface/mtu
++	else
++		ifconfig "$interface" mtu "$mtu"
++	fi
++}
++
+ # We source each script into this one so that scripts run earlier can
+ # remove variables from the environment so later scripts don't see them.
+ # Thus, the user can create their dhcpcd.enter/exit-hook script to configure
+-- 
+1.7.5.4
+
diff --git a/abs/core/dhcpcd/PKGBUILD b/abs/core/dhcpcd/PKGBUILD
index df6e342..4600940 100644
--- a/abs/core/dhcpcd/PKGBUILD
+++ b/abs/core/dhcpcd/PKGBUILD
@@ -1,10 +1,10 @@
-# $Id: PKGBUILD 96706 2010-10-24 10:55:10Z ronald $
+# $Id: PKGBUILD 155703 2012-04-05 10:02:36Z ronald $
 # Maintainer: Ronald van Haren <ronald.archlinux.org>
 # Contributor: Tom Killian <tom.archlinux.org>
 # Contributor: Judd Vinet <jvinet.zeroflux.org>
 
 pkgname=dhcpcd
-pkgver=5.2.8
+pkgver=5.5.6
 pkgrel=1
 pkgdesc="RFC2131 compliant DHCP client daemon"
 url="http://roy.marples.name/dhcpcd/"
@@ -16,35 +16,36 @@ backup=('etc/conf.d/dhcpcd' 'etc/dhcpcd.conf')
 options=('emptydirs')  # We Need the Empty /var/lib/dhcpcd Directory
 source=("http://roy.marples.name/downloads/$pkgname/$pkgname-$pkgver.tar.bz2" \
         'dhcpcd.conf.d')
-sha1sums=('3a7ffc6d3599fd4146791853b083dc577d8dd9c0'
-          'b67b9ce6a2faaca75fea356966a16be2283b7db0')
 
 build() {
   cd ${srcdir}/${pkgname}-${pkgver}
 
   # configure variables
-  ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd
+  ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd \
+	--rundir=/run
 
   # Build
-  make || return 1
+  make
 }
 
 package() {
   cd ${srcdir}/${pkgname}-${pkgver}
-  make DESTDIR=${pkgdir} install || return 1
+  make DESTDIR=${pkgdir} install
 
   # Create Binary Symlink
-  install -d ${pkgdir}/usr/sbin || return 1
-  ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd || return 1
+  install -d ${pkgdir}/usr/sbin
+  ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd
 
   # Install Configuration File used in /etc/rc.d/network
-  install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname || return 1
+  install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname
 
   # Install License
-  install -d $pkgdir/usr/share/licenses/$pkgname || return 1
+  install -d $pkgdir/usr/share/licenses/$pkgname
   awk '{if(FNR<27)print $0}' ${srcdir}/${pkgname}-${pkgver}/configure.h \
-        >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE || return 1
+        >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE
 
   # Set Options in /etc/dhcpcd.conf
-  echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf || return 1 # Disable ip4vall
+  echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf # Disable ip4vall
 }
+md5sums=('a5c0e43b4e836cfc003437329f6b7982'
+         '1579b1b17306570078d2d4edfc867983')
diff --git a/abs/core/dhcpcd/__changelog b/abs/core/dhcpcd/__changelog
new file mode 100644
index 0000000..3f0d400
--- /dev/null
+++ b/abs/core/dhcpcd/__changelog
@@ -0,0 +1,2 @@
+Added to dhcpcd.conf.d
+DHCPCD_ARGS="-t 30 -h $HOSTNAME"
diff --git a/abs/core/dhcpcd/dhcpcd.conf.d b/abs/core/dhcpcd/dhcpcd.conf.d
index 83c6f14..57e860e 100644
--- a/abs/core/dhcpcd/dhcpcd.conf.d
+++ b/abs/core/dhcpcd/dhcpcd.conf.d
@@ -2,5 +2,5 @@
 # Arguments to be passed to the DHCP client daemon
 #
 
-DHCPCD_ARGS="-q"
-
+#DHCPCD_ARGS="-q"
+DHCPCD_ARGS="-t 30 -h $HOSTNAME"
diff --git a/abs/core/dhcpcd/remove_ifconfig.patch b/abs/core/dhcpcd/remove_ifconfig.patch
new file mode 100644
index 0000000..5bcc4a6
--- /dev/null
+++ b/abs/core/dhcpcd/remove_ifconfig.patch
@@ -0,0 +1,20 @@
+--- dhcpcd-hooks/10-mtu.orig	2011-11-04 07:45:46.477712667 +0100
++++ dhcpcd-hooks/10-mtu	2011-11-04 07:46:38.964379550 +0100
+@@ -7,7 +7,7 @@
+ elif [ -n "$new_interface_mtu" ] && $if_up; then
+ 	# The smalled MTU dhcpcd can work with is 576
+ 	if [ "$new_interface_mtu" -ge 576 ]; then
+-		if ifconfig "$interface" mtu "$new_interface_mtu"; then
++		if ip link set "$interface" mtu "$new_interface_mtu"; then
+ 			syslog info "$interface: MTU set to $new_interface_mtu"
+ 			# Save the MTU so we can restore it later
+ 			if [ ! -e "$mtu_dir/$interface" ]; then
+@@ -21,7 +21,7 @@
+ 		# No MTU in this state, so restore the prior MTU
+ 		mtu=$(cat "$mtu_dir/$interface")
+ 		syslog info "$interface: MTU restored to $mtu"
+-		ifconfig "$interface" mtu "$mtu"
++		ip link set "$interface" mtu "$new_interface_mtu"
+ 		rm "$mtu_dir/$interface"
+ 	fi
+ fi