Mass move of uncompiled packages to abs_not_built.

The will sit here for a bit, and then will be removed completely if no one claims them.

6 files changed, 0 insertions, 860 deletions

diff --git a/abs/core/linhes-live/etc/live-shutdown b/abs/core/linhes-live/etc/live-shutdown
deleted file mode 100644
index b6a8378..0000000
--- a/abs/core/linhes-live/etc/live-shutdown
+++ /dev/null
@@ -1,90 +0,0 @@
-# Functions used by rc.shutdown
-# Modified versions for linhes live systems
-
-f_saveclock ()
-{
-    :
-}
-
-f_swapoff ()
-{
-    ############################# Include session saving functions
-#    . /opt/linhes-live/session-save/shutdown2
-#    if [ -f /tmp/checkse ]; then
-#        . /tmp/checkse
-#    else
-#        checkse
-#    fi
-
-    if [ -n "${saving}" ] && ! session_save; then
-        echo
-        echo "If you know what you are doing, you may be able to recover"
-        echo "something from this unpleasant situation."
-        echo
-        echo "You may use the command line to investigate further ..."
-        echo
-        echo "When finished please enter 'exit', the shutdown process will"
-        echo "then continue."
-        sh -i
-    fi
-
-    #############################
-
-    stat_busy "Deactivating Swap"
-    /sbin/swapoff -a
-    stat_done
-}
-
-f_remountro ()
-{
-    bootdev=`cat /.livesys/bootdevice`
-    echo "Boot device was $bootdev"
-    #bootdev=`basename $bootdev`
-    for i in `ls  /dev/cd/*`
-    do
-        cdrom=`readlink -f $i`
-        if [ x$cdrom = x$bootdev ]
-        then
-            ejectdev=$cdrom
-	    break
-        fi
-        
-    done
-    lspci |grep -q VMware
-    if [ !   $? = 0 ]
-    then
-        if [ -n "${ejectdev}" ]
-        then
-            echo "Ejecting CD $ejectdev"
-            eject ${ejectdev}
-            echo "========================================"
-            echo "Tray will retract after 10 seconds"
-            for timer in `seq -w 10 -1 0`
-            do
-                #echo -n  $timer '\x08'
-                echo -ne   "\t"$timer '\010\010\010\010'
-                sleep 1
-            done
-            echo
-            echo "========================================"
-            eject -t ${ejectdev}
-            echo
-            echo "It's safe to switch the computer off now"
-            #echo -ne "Press Enter to continue"
-            #read junk
-        else
-            echo "Boot device is not a cdrom, no need to eject"
-        fi
-    else
-        echo "VMWARE detected, not ejecting the CD"
-    fi
-}
-#Preloads these commands so we can eject the CD.
-#
-seq --help >/dev/null 2>&1
-eject --help >/dev/null 2>&1
-halt --help >/dev/null 2>&1
-poweroff --help >/dev/null 2>&1
-reboot --help >/dev/null 2>&1
-
-# End
diff --git a/abs/core/linhes-live/etc/live-sysinit b/abs/core/linhes-live/etc/live-sysinit
deleted file mode 100644
index 40edad9..0000000
--- a/abs/core/linhes-live/etc/live-sysinit
+++ /dev/null
@@ -1,73 +0,0 @@
-# Functions used by rc.sysinit
-# Modified versions for linhes live systems
-
-f_header ()
-{
-    cR='\e[31m' cY='\e[1;33m'  cN='\e[0m'  cW='\e[1;37m'
-    echo " "
-    printsep
-    printf "   ${cR}LinHes ${cY}Installation${cN}/${cY}Live${cW} CDROM${cN}. "
-    printsep
-    echo " "
-}
-
-f_fscheck ()
-{
-    stat_busy "Initializing /etc/mtab"
-    #/bin/mount -n -o remount,rw /
-
-    /bin/rm -f /etc/mtab*
-
-    # Make entries for aufs/unionfs, tmpfs and live medium in /etc/mtab
-    grep "^aufs */ " /proc/mounts >>/etc/mtab
-    grep "^unionfs */ " /proc/mounts >>/etc/mtab
-    grep "^tmpfs */.livesys " /proc/mounts >>/etc/mtab
-    if [ -d /.livesys/medium/live ]; then
-        grep " /.livesys/medium " /proc/mounts >>/etc/mtab
-    fi
-
-    f_mountlocal
-    stat_done
-
-    if [ -z "$( cat /etc/fstab | grep "^#KEEP" )" ]; then
-        stat_busy "Generating fresh /etc/fstab"
-        /opt/linhes-live/bin/gen_fstab -l
-        stat_done
-    fi
-
-    # now mount all the local filesystems
-    stat_busy "Mounting Local Filesystems"
-    /bin/mount -a -t $NETFS
-    stat_done
-}
-
-f_swapon ()
-{
-    #+*** Copy session-save flag-file (if it exists)
-    [ -f /live/nosave ] && cp /live/nosave /.livesys
-    #-***
-
-    #*** Conditional swap activation
-    if [ -e /.livesys/swapon ]; then
-        status "Activating Swap" /sbin/swapon -a
-    fi
-}
-f_loadmodules()
-{
-    CMDLINE=$(cat /proc/cmdline)
-    echo $CMDLINE | grep -q modules
-    if [ $? -eq 0 ]
-    then
-        TEMPVAR=${CMDLINE#* modules=}
-        CMDMODULES=${TEMPVAR%% *}
-        mymod=`echo $CMDMODULES|/bin/sed 's|-|_|g' |/bin/sed 's|,| |g'`
-        stat_busy "Loading CMD module"
-        for mod in $mymod
-        do
-              /sbin/modprobe $mod
-        done
-        stat_done
-    fi
-
-
-}
diff --git a/abs/core/linhes-live/etc/loginroot b/abs/core/linhes-live/etc/loginroot
deleted file mode 100755
index e3153c6..0000000
--- a/abs/core/linhes-live/etc/loginroot
+++ /dev/null
@@ -1,3 +0,0 @@
-#! /bin/sh
-login -f root
-# End
diff --git a/abs/core/linhes-live/etc/rc.shutdown-live b/abs/core/linhes-live/etc/rc.shutdown-live
deleted file mode 100755
index 79eae47..0000000
--- a/abs/core/linhes-live/etc/rc.shutdown-live
+++ /dev/null
@@ -1,168 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.shutdown
-#
-
-###
-# Based on initscripts 2008.05-1
-###
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-###############################################################
-### These functions have been separated out, so that they can be
-### replaced in linhes live systems.
-
-f_saveclock ()
-{
-    stat_busy "Saving System Clock"
-    if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
-        /bin/rm -f /etc/localtime
-        /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-    fi
-
-    HWCLOCK_PARAMS="--systohc"
-    if [ "$HARDWARECLOCK" = "UTC" ]; then
-        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
-    else
-        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
-    fi
-    if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
-        HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
-    fi
-    /sbin/hwclock $HWCLOCK_PARAMS
-    stat_done
-}
-
-f_swapoff ()
-{
-    stat_busy "Deactivating Swap"
-    /sbin/swapoff -a
-    stat_done
-}
-
-f_remountro ()
-{
-    stat_busy "Remounting Root Filesystem Read-only"
-    /bin/mount -n -o remount,ro /
-    stat_done
-}
-
-###############################################################
-
-### Override above functions if running linhes live system
-[ -f /etc/live-shutdown ] && . /etc/live-shutdown
-
-# avoid staircase effect
-/bin/stty onlcr
-
-echo " "
-printhl "Initiating Shutdown..."
-echo " "
-
-# avoid NIS hanging syslog-ng on shutdown by unsetting the domainname
-if [ -x /bin/domainname ]; then
-    /bin/domainname ""
-fi
-
-if [ -x /etc/rc.local.shutdown ]; then
-    /etc/rc.local.shutdown
-fi
-
-if [ "$PREVLEVEL" = "3" -o "$PREVLEVEL" = "5" ]; then
-    # Shutdown daemons
-    let i=${#DAEMONS[@]}
-    while [ $i -ge 0 ]; do
-        if [ "${DAEMONS[$i]:0:1}" != '!' ]; then
-            ck_daemon ${DAEMONS[$i]#@} || /etc/rc.d/${DAEMONS[$i]#@} stop
-        fi
-        let i=i-1
-    done
-    # find any leftover daemons and shut them down in reverse order
-    if [ -d /var/run/daemons ]; then
-        for daemon in $(/bin/ls -1t /var/run/daemons); do
-            /etc/rc.d/$daemon stop
-        done
-    fi
-fi
-
-# Terminate all processes
-stat_busy "Sending SIGTERM To Processes"
-/sbin/killall5 -15 &> /dev/null
-/bin/sleep 5
-stat_done
-
-stat_busy "Sending SIGKILL To Processes"
-/sbin/killall5 -9 &> /dev/null
-/bin/sleep 1
-stat_done
-
-stat_busy "Saving Random Seed"
-/bin/dd if=/dev/urandom of=/var/run/random-seed count=1 bs=512 2> /dev/null
-stat_done
-
-#F Save system time
-f_saveclock
-
-# removing psmouse module to fix some reboot issues on newer laptops
-/sbin/modprobe -r psmouse >/dev/null 2>&1
-
-# Write to wtmp file before unmounting
-/sbin/halt -w
-
-#F Deactivate swaps
-f_swapoff
-
-stat_busy "Unmounting Filesystems"
-/bin/umount -a -t noramfs,notmpfs,nosysfs,noproc
-stat_done
-
-# Kill non-root encrypted partition mappings
-if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
-    stat_busy "Deactivating encrypted volumes:"
-    CS=/sbin/cryptsetup.static
-    do_uncrypt() {
-        if [ $# -ge 3 ]; then
-            stat_append "${1}.."
-            $CS remove $1 >/dev/null 2>&1
-            if [ $? -ne 0 ]; then
-                stat_append "failed "
-            else
-                stat_append "ok "
-            fi
-        fi
-    }
-    while read line; do
-        eval do_uncrypt "$line"
-    done </etc/crypttab
-    stat_done
-fi
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
-    if [ -x /sbin/lvm -a -d /sys/block ]; then
-        stat_busy "Deactivating LVM2 groups"
-        /sbin/lvm vgchange --ignorelockingfailure -an >/dev/null 2>&1
-        stat_done
-    fi
-fi
-
-#F Remount / ro
-f_remountro
-#Eject the CD
-
-# Power off or reboot
-if [ "$RUNLEVEL" = "0" ]; then
-    printsep
-    printhl "${C_H2}POWER OFF"
-    /sbin/poweroff -d -f -h -i
-else
-    printsep
-    printhl "${C_H2}REBOOTING"
-    # if kexec is installed and a kernel is loaded, use it
-    [ -x /sbin/kexec ] && /sbin/kexec -e > /dev/null 2>&1
-    /sbin/reboot -d -f -i
-fi
-
-# vim: set ts=2 sw=2 noet:
-# End
diff --git a/abs/core/linhes-live/etc/rc.sysinit-live b/abs/core/linhes-live/etc/rc.sysinit-live
deleted file mode 100755
index afdc2ae..0000000
--- a/abs/core/linhes-live/etc/rc.sysinit-live
+++ /dev/null
@@ -1,469 +0,0 @@
-#!/bin/bash
-#
-# /etc/rc.sysinit
-#
-
-###
-# Based on initscripts 2008.05-1
-###
-
-. /etc/rc.conf
-. /etc/rc.d/functions
-
-###############################################################
-### These functions have been separated out, so that they can be
-### replaced in linhes live systems.
-
-f_header ()
-{
-    echo " "
-    printhl "Arch Linux $C_OTHER(${C_H2}Core Dump$C_OTHER)\n"
-    printhl "${C_H2}http://www.archlinux.org"
-    printhl "Copyright 2002-2007 Judd Vinet"
-    printhl "Copyright 2007-2008 Aaron Griffin"
-    printhl "Distributed under the GNU General Public License (GPL)"
-    printsep
-}
-
-f_fscheck ()
-{
-    status "Mounting Root Read-only" /bin/mount -n -o remount,ro /
-
-    if [ -x /sbin/fsck ]; then
-        stat_busy "Checking Filesystems"
-        if /bin/grep -qw quiet /proc/cmdline; then
-            /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK >/dev/null 2>&1
-        else
-            /sbin/fsck -A -T -C -a -t $NETFS $FORCEFSCK 2>/dev/null
-        fi
-        fsckret=$?
-        if [ ${fsckret} -gt 1 ]; then
-            stat_fail
-            if [ $((${fsckret}&2)) -eq 2 ]; then
-                echo
-                echo "********************** REBOOT REQUIRED *********************"
-                echo "*                                                          *"
-                echo "* The system will be rebooted automatically in 15 seconds. *"
-                echo "*                                                          *"
-                echo "************************************************************"
-                echo
-                /bin/sleep 15
-            else
-                echo
-                echo "*****************  FILESYSTEM CHECK FAILED  ****************"
-                echo "*                                                          *"
-                echo "*  Please repair manually and reboot. Note that the root   *"
-                echo "*  file system is currently mounted read-only. To remount  *"
-                echo "*  it read-write type: mount -n -o remount,rw /            *"
-                echo "*  When you exit the maintenance shell the system will     *"
-                echo "*  reboot automatically.                                   *"
-                echo "*                                                          *"
-                echo "************************************************************"
-                echo
-                /sbin/sulogin -p
-            fi
-            echo "Automatic reboot in progress..."
-            /bin/umount -a
-            /bin/mount -n -o remount,ro /
-            /sbin/reboot -f
-            exit 0
-        fi
-        stat_done
-    fi
-
-    stat_busy "Mounting Local Filesystems"
-    /bin/mount -n -o remount,rw /
-    /bin/rm -f /etc/mtab*
-    # make sure / gets written to /etc/mtab
-    /bin/mount -o remount,rw /
-
-    f_mountlocal
-    stat_done
-}
-
-f_mountlocal ()
-{
-    # Write /proc, /sys and /dev to /etc/mtab
-    if [ -e /proc/mounts ]; then
-        /bin/grep -e "/proc " -e "/sys " -e "/dev " /proc/mounts >> /etc/mtab
-    fi
-    # now mount all the local filesystems
-    /bin/mount -a -t $NETFS
-}
-
-f_swapon ()
-{
-    status "Activating Swap" /sbin/swapon -a
-}
-
-###############################################################
-
-### Override above functions if running linhes live system
-[ -f /etc/live-sysinit ] && . /etc/live-sysinit
-
-#F Print header
-f_header
-
-# mount /proc, /sys and our RAM /dev
-/bin/mount -n -t ramfs none /dev
-/bin/mount -n -t proc none /proc
-/bin/mount -n -t sysfs none /sys
-
-# Create our default nodes that minilogd may need
-/bin/mknod /dev/null c 1 3
-/bin/mknod /dev/zero c 1 5
-/bin/mknod /dev/console c 5 1
-
-# More initial /dev setup that udev doesn't do
-/bin/ln -snf /proc/self/fd /dev/fd
-/bin/ln -snf /proc/self/fd/0 /dev/stdin
-/bin/ln -snf /proc/self/fd/1 /dev/stdout
-/bin/ln -snf /proc/self/fd/2 /dev/stderr
-/bin/ln -snf /proc/kcore /dev/core
-/bin/mkdir /dev/pts
-/bin/mkdir /dev/shm
-
-# start up our mini logger until syslog takes over
-/sbin/minilogd
-
-# anything more serious than KERN_WARNING goes to the console
-# 'verbose' cmdline parameter enables more messages
-if /bin/grep -q " verbose" /proc/cmdline; then
-    /bin/dmesg -n 8
-else
-    /bin/dmesg -n 3
-fi
-
-# enable rtc access
-/sbin/modprobe rtc-cmos >/dev/null 2>&1
-RTC_MAJOR=$(/bin/grep -w rtc /proc/devices 2>/dev/null); RTC_MAJOR="${RTC_MAJOR%% *}"
-if [ -n "$RTC_MAJOR" ]; then
-    /bin/mkdir /dev/misc/
-    /bin/mknod /dev/misc/rtc0 c $RTC_MAJOR 0
-    /bin/ln -s /dev/misc/rtc0 /dev/rtc
-fi
-
-HWCLOCK_PARAMS="--hctosys"
-if [ "$HARDWARECLOCK" = "UTC" ]; then
-    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --utc"
-else
-    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --localtime"
-fi
-if [ "$USEDIRECTISA" = "yes" -o "$USEDIRECTISA" = "YES" ]; then
-    HWCLOCK_PARAMS="$HWCLOCK_PARAMS --directisa"
-fi
-
-# Set clock early to fix some bugs with filesystem checks
-# Clock is set again later to match rc.conf
-if [ -f /etc/localtime ]; then
-    /sbin/hwclock $HWCLOCK_PARAMS --noadjfile
-fi
-
-echo > /proc/sys/kernel/hotplug
-
-if [ -x /sbin/udevadm -a -d /sys/block ]; then
-    # We have udev and /sys appears to be mounted, use UDev
-    #status "Starting UDev Daemon" /etc/start_udev init
-
-    stat_busy "Starting UDev Daemon"
-    /sbin/udevd --daemon
-    stat_done
-else
-    # Static /dev, our last resort
-    status "Using static /dev filesystem" true
-fi
-
-# Load modules from the MODULES array defined in rc.conf
-if ! [ "$load_modules" = "off" ]; then
-    if [ -f /proc/modules ]; then
-############Added by jm to load modules from /proc/cmdline
-	f_loadmodules
-##############
-        stat_busy "Loading Modules"
-        for mod in "${MODULES[@]}"; do
-            if [ "$mod" = "${mod#!}" ]; then
-                /sbin/modprobe $mod
-            fi
-        done
-        stat_done
-    fi
-    if [ -d /proc/acpi ]; then
-        stat_busy "Loading standard ACPI modules"
-        ACPI_MODULES="ac battery button fan processor thermal"
-        k="$(echo $BLACKLIST ${MOD_BLACKLIST[@]} | /bin/sed 's|-|_|g')"
-        j="$(echo ${MODULES[@]} | /bin/sed 's|-|_|g')"
-        #add disabled MODULES (!) to blacklist - much requested feature
-        for m in ${j}; do
-                [ "$m" != "${m#!}" ] && k="${k} ${m#!}"
-        done
-        # add disablemodules= from commandline to blacklist
-        k="${k} $(echo ${disablemodules} | /bin/sed 's|-|_|g' | /bin/sed 's|,| |g')"
-        for n in ${ACPI_MODULES}; do
-            if ! echo ${k} | /bin/grep "\<$n\>" 2>&1 >/dev/null; then
-                /sbin/modprobe $n > /dev/null 2>&1
-            fi
-        done
-        stat_done
-    fi
-fi
-
-# run udev uevents
-if /bin/pidof -o %PPID /sbin/udevd >/dev/null; then
-    #status "Loading UDev uevents" /etc/start_udev uevents
-    stat_busy "Loading UDev uevents"
-    udevstart="$(/bin/date +%s%0N)"
-    /sbin/udevadm trigger
-    /sbin/udevadm settle
-    stat_done
-    udevend="$(/bin/date +%s%0N)"
-    printhl "   UDev uevent processing time: $((($udevend-$udevstart)/1000000))ms"
-fi
-
-# bring up the loopback interface
-if [ -d /sys/class/net/lo ]; then
-    stat_busy "Bringing up loopback interface"
-    /sbin/ifconfig lo 127.0.0.1 up
-    if [ $? -ne 0 ]; then
-        stat_fail
-    else
-        stat_done
-    fi
-fi
-
-# If necessary, find md devices and manually assemble RAID arrays
-if [ -f /etc/mdadm.conf -a "$(/bin/grep ^ARRAY /etc/mdadm.conf 2>/dev/null)" ]; then
-    # udev won't create these md nodes, so we do it ourselves
-    for dev in $(/bin/grep ^ARRAY /etc/mdadm.conf | /bin/awk '{print $2}'); do
-        path=$(echo $dev | /bin/sed 's|/[^/]*$||')
-        node=$(echo $dev | /bin/sed "s|^$path/||")
-        minor=$(echo $node | /bin/sed 's|^[^0-9]*||')
-        [ ! -e $path/$node ] && /bin/mknod $path/$node b 9 $minor
-    done
-    status "Activating RAID arrays" /sbin/mdadm --assemble --scan
-fi
-
-if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
-    if [ -x /sbin/lvm -a -d /sys/block ]; then
-        # Kernel 2.6.x, LVM2 groups
-        /sbin/modprobe -q dm-mod 2>/dev/null
-        stat_busy "Activating LVM2 groups"
-        /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
-        /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
-        if [ $? -ne 0 ]; then
-            stat_fail
-        else
-            stat_done
-        fi
-    fi
-fi
-
-# Set up non-root encrypted partition mappings
-if [ -f /etc/crypttab -a -n "$(/bin/grep -v ^# /etc/crypttab | /bin/grep -v ^$)" ]; then
-    /sbin/modprobe -q dm-mod 2>/dev/null
-    stat_busy "Unlocking encrypted volumes:"
-    csfailed=0
-    CS=/sbin/cryptsetup.static
-    do_crypt() {
-        if [ $# -ge 3 ]; then
-            cname="$1"
-            csrc="$2"
-            cpass="$3"
-            shift 3
-            copts="$*"
-            stat_append "${cname}.."
-            # For some fun reason, the parameter ordering varies for
-            # LUKS and non-LUKS devices.  Joy.
-            if [ "${cpass}" = "SWAP" ]; then
-                # This is DANGEROUS! The only possible safety check
-                # is to not proceed in case we find a LUKS device
-                # This may cause dataloss if it is not used carefully
-                if $CS isLuks $csrc 2>/dev/null; then
-                    false
-                else
-                    $CS -d /dev/urandom $copts create $cname $csrc >/dev/null
-                    if [ $? -eq 0 ]; then
-                        stat_append "creating swapspace.."
-                        /sbin/mkswap -L $cname /dev/mapper/$cname >/dev/null
-                    fi
-                fi
-            elif [ "${cpass}" = "ASK" ]; then
-                printf "\nOpening '${cname}' volume:\n"
-
-                if $CS isLuks $csrc 2>/dev/null; then
-                    $CS $copts luksOpen $csrc $cname < /dev/console
-                else
-                    $CS $copts create $cname $csrc < /dev/console
-                fi
-            elif [ "${cpass:0:1}" != "/" ]; then
-                if $CS isLuks $csrc 2>/dev/null; then
-                    echo "$cpass" | $CS $copts luksOpen $csrc $cname >/dev/null
-                else
-                    echo "$cpass" | $CS $copts create $cname $csrc >/dev/null
-                fi
-            else
-                if $CS isLuks $csrc 2>/dev/null; then
-                    $CS -d $cpass $copts luksOpen $csrc $cname >/dev/null
-                else
-                    $CS -d $cpass $copts create $cname $csrc >/dev/null
-                fi
-            fi
-            if [ $? -ne 0 ]; then
-                csfailed=1
-                stat_append "failed "
-            else
-                stat_append "ok "
-            fi
-        fi
-    }
-    while read line; do
-        eval do_crypt "$line"
-    done </etc/crypttab
-    if [ $csfailed -eq 0 ]; then
-        stat_done
-    else
-        stat_fail
-    fi
-    # Maybe someone has LVM on an encrypted block device
-    if [ "$USELVM" = "yes" -o "$USELVM" = "YES" ]; then
-        if [ -x /sbin/lvm -a -d /sys/block ]; then
-            /sbin/lvm vgscan --ignorelockingfailure --mknodes >/dev/null
-            /sbin/lvm vgchange --ignorelockingfailure -a y >/dev/null
-        fi
-    fi
-fi
-
-FORCEFSCK=
-[ -f /forcefsck ] && FORCEFSCK="-- -f"
-NETFS="nonfs,nonfs4,nosmbfs,nocifs,nocodafs,noncpfs,nosysfs,noshfs,nofuse,nofuseblk"
-
-#F Check filesystems
-f_fscheck
-
-#F Activate swaps
-f_swapon
-
-stat_busy "Configuring System Clock"
-if [ ! -f /var/lib/hwclock/adjtime ]; then
-    echo "0.0 0 0.0" > /var/lib/hwclock/adjtime
-fi
-if [ "$TIMEZONE" != "" -a -e "/usr/share/zoneinfo/$TIMEZONE" ]; then
-    /bin/rm -f /etc/localtime
-    /bin/cp "/usr/share/zoneinfo/$TIMEZONE" /etc/localtime
-fi
-
-/sbin/hwclock $HWCLOCK_PARAMS
-stat_done
-
-if [ -f /var/run/random-seed ]; then
-    stat_busy "Initializing Random Seed"
-    /bin/cat /var/run/random-seed >/dev/urandom
-    stat_done
-fi
-
-stat_busy "Removing Leftover Files"
-/bin/rm -f /etc/nologin &>/dev/null
-/bin/rm -f /etc/shutdownpid &>/dev/null
-/bin/rm -f /var/lock/* &>/dev/null
-/bin/rm -rf /tmp/* /tmp/.* &>/dev/null
-/bin/rm -f /forcefsck &>/dev/null
-(cd /var/run && /usr/bin/find . ! -type d -exec /bin/rm -f -- {} \; )
-: > /var/run/utmp
-# Keep {x,k,g}dm happy with xorg
-/bin/mkdir /tmp/.ICE-unix && /bin/chmod 1777 /tmp/.ICE-unix
-/bin/mkdir /tmp/.X11-unix && /bin/chmod 1777 /tmp/.X11-unix
-stat_done
-
-#status "Updating Shared Library Links" /sbin/ldconfig
-
-if [ "$HOSTNAME" != "" ]; then
-    status "Setting Hostname: $HOSTNAME" /bin/hostname $HOSTNAME
-fi
-
-# Set the NIS domain name, if necessary
-[ -f /etc/conf.d/nisdomainname ] && . /etc/conf.d/nisdomainname
-if [ "$NISDOMAINNAME" != "" ]; then
-    status "Setting NIS Domain Name: $NISDOMAINNAME" /bin/nisdomainname $NISDOMAINNAME
-fi
-
-status "Updating Module Dependencies" /sbin/depmod -A
-
-# Flush old locale settings
-: >/etc/profile.d/locale.sh
-/bin/chmod 755 /etc/profile.d/locale.sh
-# Set user defined locale
-[ -z "$LOCALE" ] && LOCALE="en_US"
-stat_busy "Setting Locale: $LOCALE"
-echo "export LANG=$LOCALE" >>/etc/profile.d/locale.sh
-stat_done
-
-if echo "$LOCALE" | /bin/grep -qi utf ; then
-    stat_busy "Setting Consoles to UTF-8 mode"
-    # UTF-8 consoles are default since 2.6.24 kernel
-    # this code is needed not only for older kernels,
-    # but also when user has set vt.default_utf8=0 but LOCALE is *.UTF-8.
-    /usr/bin/kbd_mode -u
-    for i in $(/usr/bin/seq 0 63); do
-        printf "\e%%G" > /dev/vc/${i}
-    done
-    # the $CONSOLE check helps us avoid this when running scripts from cron
-    echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%G"; fi' >>/etc/profile.d/locale.sh
-    stat_done
-    [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q -u $KEYMAP
-else
-    stat_busy "Setting Consoles to legacy mode"
-    # make non-UTF-8 consoles work on 2.6.24 and newer kernels
-    /usr/bin/kbd_mode -a
-    for i in $(/usr/bin/seq 0 63); do
-        printf "\e%%@" > /dev/vc/${i}
-    done
-    # the $CONSOLE check helps us avoid this when running scripts from cron
-    echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e%%@"; fi' >>/etc/profile.d/locale.sh
-    stat_done
-    [ -n "$KEYMAP" ] && status "Loading Keyboard Map: $KEYMAP" /bin/loadkeys -q $KEYMAP
-fi
-
-if [ -n "$CONSOLEFONT" ]; then
-    stat_busy "Loading Console Font: $CONSOLEFONT"
-    #CONSOLEMAP in UTF-8 shouldn't be used
-    if [ -n "$CONSOLEMAP" ] && echo "$LOCALE" | /bin/grep -qi utf ; then
-        CONSOLEMAP=""
-    fi
-    for i in $(/usr/bin/seq 0 63); do
-        if [ -n "$CONSOLEMAP" ]; then
-            /usr/bin/setfont -m $CONSOLEMAP $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
-        else
-            /usr/bin/setfont $CONSOLEFONT -C /dev/vc/${i} >/dev/null 2>&1
-        fi
-    done
-    if [ $? -ne 0 ]; then
-        stat_fail
-    else
-        for i in $(/usr/bin/seq 0 63); do
-            printf "\e(K" > /dev/vc/${i}
-        done
-        # the $CONSOLE check helps us avoid this when running scripts from cron
-        echo 'if [ "$CONSOLE" = "" -a "$TERM" = "linux" -a -t 1 ]; then printf "\e(K"; fi' >>/etc/profile.d/locale.sh
-        stat_done
-    fi
-fi
-
-# Adding persistent network/cdrom generated rules
-if [ -f "/dev/.udev/tmp-rules--70-persistent-cd.rules" ]; then
-    stat_busy "Adding persistent cdrom udev rules"
-    /bin/cat /dev/.udev/tmp-rules--70-persistent-cd.rules >> /etc/udev/rules.d/70-persistent-cd.rules
-    stat_done
-fi
-if [ -f "/dev/.udev/tmp-rules--70-persistent-net.rules" ]; then
-    stat_busy "Adding persistent network udev rules"
-    /bin/cat /dev/.udev/tmp-rules--70-persistent-net.rules >> /etc/udev/rules.d/70-persistent-net.rules
-    stat_done
-fi
-
-# Save our dmesg output from this boot
-if [ -f /var/log/dmesg.log ]; then
-    /bin/rm /var/log/dmesg.log
-fi
-/bin/dmesg > /var/log/dmesg.log
-
-# vim: set ts=2 noet:
-# End
diff --git a/abs/core/linhes-live/etc/ulogin b/abs/core/linhes-live/etc/ulogin
deleted file mode 100755
index 085c431..0000000
--- a/abs/core/linhes-live/etc/ulogin
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-# ulogin  - A script for autologin of a selected user (and more)
-#-----------------------------------------------------------------
-# 2008.04.06
-
-user=$( cat /tmp/newuser 2>/dev/null )
-
-rm -f /tmp/newuser
-rm -f /tmp/xlogout
-
-if [ -n "${user}" ]; then
-    login -f ${user}
-else
-    # offer choice of user
-    ulist="$( cat /etc/passwd | grep ':/home/.*sh$' )"
-    echo -e "\nLogin a user or quit:"
-    echo "   0 : root"
-    echo "   1 : REBOOT"
-    echo "   2 : HALT"
-
-    i=2
-    for entry in ${ulist}; do
-        i=$(( ${i} + 1 ))
-        user="$( echo ${entry} | cut -d':' -f1 )"
-        users[${i}]=${user}
-        printf "%4d : %s\n" ${i} ${user}
-    done
-    while true; do
-        read -p "Enter a number from 0 to ${i} : " n
-        if [ "${n}" = 0 ]; then
-            login -f root
-        elif [ "${n}" = 1 ]; then
-            exec reboot
-        elif [ "${n}" = 2 ]; then
-            exec halt
-        elif [ -n "$( echo "${n}" | grep "^[0-9]\+$" )" ] && \
-                [ -n "${users[${n}]}" ]; then
-            login -f ${users[${n}]}
-        else
-            echo "  *** Invalid choice ..."
-            continue
-        fi
-        break
-    done
-fi
-
-if grep "r" /tmp/xlogout &>/dev/null; then
-    reboot
-elif grep "h" /tmp/xlogout &>/dev/null; then
-    halt
-fi
-
-# This file is only needed for shutting down
-rm -f /tmp/checkse
-
-# End