live-installer is no longer used

1 files changed, 0 insertions, 481 deletions

diff --git a/abs/core/live-installer/install_proxy.sh b/abs/core/live-installer/install_proxy.sh
deleted file mode 100755
index ec7f29c..0000000
--- a/abs/core/live-installer/install_proxy.sh
+++ /dev/null
@@ -1,481 +0,0 @@
-#!/bin/bash
-#chroot  and /tmp
-MVHOSTNAME=mvi
-. /etc/profile
-TEMP_TEMPLATES=/tmp/templates
-disk=$2
-rootfs=$3
-rootsize=$4
-datafs=$5
-datasize=$6
-swapsize=$7
-mountpoint="/new_boot"
-run=$MV_ROOT/bin/install_functions.sh
-. /etc/systemconfig 2>/dev/null
-. $MV_ROOT/bin/networkconfig.sh
-CMDLINE=$(cat /proc/cmdline)
-
-#TEMPNET="Hostip"$default_interface
-#eval MYTHIP=\$${TEMPNET}
-
-
-progress () {
-mypercent=`echo "$1" | cut -d. -f1`
-if [  x$mypercent = x ]
-then
-echo "" > /tmp/.install_percent
-else
-echo "${mypercent}% complete" > /tmp/.install_percent
-fi
-
-
-}
-
-
-
-
-full_install () {
-    if [ -f /tmp/.this_is_upgrade ]
-    then
-        rm /tmp/.this_is_upgrade
-    fi
-    echo "Partitioning $disk" > /tmp/.install_state
-    progress 1
-    sleep 1
-    $run partition_it $disk $rootsize $datasize $swapsize
-
-    echo "Formatting $disk" > /tmp/.install_state
-        progress 2
-    sleep 1
-    $run format_it $disk $rootfs $datafs
-
-    echo "Preparing $disk" > /tmp/.install_state
-    progress 3
-    sleep 1
-    $run mount_it $disk
-
-    startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
-
-    echo "STARTSIZE=$startsize">/tmp/.startsize.io
-    echo "Installing data" > /tmp/.install_state
-
-    sleep 1
-        $run copy_it $disk ALL
-        rm $mountpoint/etc/fstab
-        $run fstab_fix_it $disk $rootfs $datafs FULL_INSTALL
-
-    progress 99
-    sleep 1
-    $run grub_it $disk
-
-
-    echo "Configuring system" > /tmp/.install_state
-        progress 100
-        sleep 1
-        cp -f /etc/systemconfig "$mountpoint"/etc
-    #run save syssettings to save settings, then copy to new mountpoint
-        $MV_ROOT/bin/restore_default_settings.sh  -c save -t syssettings -h $MVHOSTNAME -d 127.0.0.1
-        SE=$TEMPLATES/settings/syssettings
-        mkdir -p ${mountpoint}$SE
-        cp -rp $SE/*  ${mountpoint}$SE/
-        chown root:mythtv "$mountpoint"/etc/systemconfig
-        chown -R mythtv:mythtv ${mountpoint}$SE
-
-        chmod -R 775   ${mountpoint}$SE
-        chmod 775 "$mountpoint"/etc/systemconfig
-        #copy over any updates that might have occured
-        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
-        chmod -R 755 ${mountpoint}/root
-        cp /etc/mtab "$mountpoint"/etc/mtab
-      
-
-    if  [ $SystemType = "Master_backend" -o $SystemType = "Standalone"  ]
-    then
-            #installing DB to local machine
-                #turn off old live database, so the chroot one can start
-            /etc/rc.d/mysqld stop
-            mount --bind /dev "$mountpoint/dev"
-            chroot "$mountpoint"   "$MV_ROOT/bin/install_db_chroot.sh"  >  /tmp/chrootdb.out
-            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-            echo "stopping mysql in chroot"
-            chroot "$mountpoint" /etc/rc.d/mysqld stop
-            umount "$mountpoint/dev"
-            
-            #/etc/rc.d/mysqld start
-    else
-            #update remotedb with this host settings
-            chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
-            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-            if [ !  $? = 0 ]
-            then
-                touch $mountpoint/tmp/.dbsysfailed
-                chmod 777 $mountpoint/tmp/.dbsysfailed
-            else
-            #Run second time
-            chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-            chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c  ACCESSCONTROL
-            fi
-    fi
-    chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced
-    echo "Done" > /tmp/.install_state
-    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
-    $run unmount_it $disk
-}
-
-function createsquashlist(){
-if [ -f $1 ]
-then
-    rm -f 
-$1
-fi
-for i in bin boot etc home lib opt root sbin usr var
-do
-echo $i >> $1
-done
-
-
-}
-
-
-
-
-function upgrade () {
-    touch /tmp/.this_is_upgrade
-
-    if [ ! x$rootfs = "xDo_not_format" ]
-    then
-        echo "Formatting $disk" > /tmp/.install_state
-            progress 2
-            sleep 1
-            $run format_it $disk $rootfs NO
-    fi
-    echo "Preparing $disk" > /tmp/.install_state
-        progress 3
-        sleep 1
-        $run mount_it $disk
-        startsize=`statgrab -M disk.|grep $disk.write_bytes|cut -d= -f 2|tr -d " "`
-        echo "STARTSIZE=$startsize">/tmp/.startsize.io
-        echo "Installing data" > /tmp/.install_state
-        sleep 1
-        cp -rf /tmp/etc /new_boot/etc.old
-        cp -rf  /tmp/oss /new_boot/var/lib/oss.old
-        #$run copy_it $disk bin.lzm,boot.lzm,etc.lzm,home.lzm,lib.lzm,opt.lzm,root.lzm,sbin.lzm,usr.lzm,var.lzm
-        SQUASHLIST="/tmp/.squashlist"
-        createsquashlist $SQUASHLIST
-        $run copy_it $disk $SQUASHLIST
-        #copy back ssh keys
-
-        cp -rp /data/var/cache/pacman/pkg/* /new_boot/data/var/cache/pacman/pkg/
-        cp -fp /new_boot/etc.old/ssh/*.pub   /new_boot/etc/ssh/
-        cp -fp /new_boot/etc.old/ssh/*.key   /new_boot/etc/ssh/
-        cp -fp /new_boot/etc.old/ssh/*key   /new_boot/etc/ssh/
-        
-        #funckeys
-        cadir=/etc/pki/func/ca
-        mv /new_boot/etc/pki  /new_boot/etc/pki.new
-        cp -rp /new_boot/etc.old/pki  /new_boot/etc/
-        #passwd/shadow/group
-        cp -fp /new_boot/etc.old/passwd /new_boot/etc/
-        cp -fp /new_boot/etc.old/shadow /new_boot/etc/
-        cp -fp /new_boot/etc.old/group   /new_boot/etc/
-
-        if [  x$rootfs = "xDo_not_format" ]
-        then
-            #rootfs=`grep ${disk}1 /tmp/etc/fstab |awk ' { print $3 } '`
-            rootfs=`grep \/\  /tmp/etc/fstab |awk ' { print $3 } '`
-        fi
-            #datafs=`grep ${disk}3 /tmp/etc/fstab |awk ' { print $3 } '`
-            datafs=`grep \/data /tmp/etc/fstab |awk ' { print $3 } '`
-            $run fstab_fix_it $disk $rootfs $datafs UPGRADE
-
-    echo "Writing boot sector" > /tmp/.install_state
-        progress 99
-        sleep 1
-        $run grub_it $disk
-
-
-    echo "Configuring system" > /tmp/.install_state
-        progress
-        sleep 1
-        cp /etc/mtab "$mountpoint"/etc/mtab
-        cp -f /etc/systemconfig "$mountpoint"/etc
-        cp -f $MV_ROOT/bin/*.sh "$mountpoint"$MV_ROOT/bin/
-        chmod -R 755 ${mountpoint}/root
-        chown root:mythtv "$mountpoint"/etc/systemconfig
-        chmod 775 "$mountpoint"/etc/systemconfig
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-        #wrap this in a network check_network, no need to update the db if the import worked.
-#####  do I need to start mysql?
-        chroot "$mountpoint" DISPLAY=127.0.0.1:0  /usr/local/bin/MythVantage -t  restore,default_1
-        chroot "$mountpoint" $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings
-        #
-    #Run second time
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh misc,hostype,network,advanced,this_is_install
-        chroot "$mountpoint" $MV_ROOT/bin/systemconfig.sh advanced,this_is_install
-
-    #  fi
-
-    echo "Done" > /tmp/.install_state
-    cp /tmp/mythvantage_install.log  $mountpoint/var/log/
-    $run unmount_it $disk
-}
-
-function netboot-full_install () {
-    TEMPVAR=${CMDLINE#*nfsroot=}
-    NFSROOT=${TEMPVAR%% *}
-    NFSROOT=`echo $NFSROOT|cut -d: -f1`
-    MAC=`/sbin/ifconfig eth0|grep HWaddr| cut -d: -f2-|awk '{ print $3}'|tr : -`
-    URL="http://$NFSROOT:1337/diskless.py?HOSTNAME=$hostname&MAC=$MAC"
-    echo "calling $URL"
-    echo "Starting" > /tmp/.install_state
-    curl $URL
-    ${MV_ROOT}/bin/xconfig.sh
-}
-
-function killdhcp () {
-if [ -f /etc/dhcpc/dhcpcd-eth0.pid ]
-        then
-            pid=`cat /etc/dhcpc/dhcpcd-eth0.pid`
-            kill -9 $pid
-            rm -f /etc/dhcpc/dhcpcd-eth0.pid
-            rm -f /var/run/dhcpcd*
-        fi
-if [ -f /var/run/dhcpcd-eth0.pid ]
-        then
-            pid=`cat /var/run/dhcpcd-eth0.pid`
-            kill -9 $pid
-            rm -f /var/run/dhcpcd-eth0.pid*
-        fi
-ip address flush dev eth0
-}
-
-
-# function vnc_check() {
-#     CMDLINE=$(cat /proc/cmdline)
-#     echo $CMDLINE |grep -q vnc
-#     USEVNC=$?
-#     echo $CMDLINE |grep -q nfsroot
-#      NETBOOT=$?
-#     echo $USEVNC
-# 	if [ !  x$USEVNC = x0  ]
-# 	then
-# 	    echo "not using vnc"
-#         if [ !  x$NETBOOT = x0  ]
-#         then
-#             echo "not using netboot"
-#         else
-#             echo "using netboot"
-#             USEVNC=0
-#         fi
-# 
-#     else
-#         echo " using vnc"
-#     fi
-# }
-
-
-# function network_setup () {
-# DEVICE=eth0
-#     if [ ! -f /etc/systemconfig ]
-#     then
-#         exit 1
-#     fi
-# 
-# if [ ! x$USEVNC = x0  ]
-# then
-#     echo "Resetting  the network"
-#     killdhcp
-#     if [ $UseDHCP = 0 ]
-#     then
-#          /sbin/dhcpcd $DEVICE
-#             if [ ! $? = 0 ]
-#             then
-#                 exit 2
-#             fi
-#         fi
-# else
-#   echo "using vnc/netboot, will not reset network"
-#   echo "nameserver $nameserver" > /etc/resolv.conf
-#   return 0
-# fi
-# 
-# if [ $UseDHCP = 1 ]
-# then
-# 
-#         /sbin/ifconfig $DEVICE $ip
-#         /sbin/route add default gw $route
-#         echo "nameserver $nameserver" > /etc/resolv.conf
-# 
-# fi
-# 
-# 
-# }
-
-function SANE_SYSETTINGS () {
-sed -e '/HOSTrootfstype/d' \
-        -e '/HOSTrootfstype/d' \
-        -e '/HOSTdatafstype/d' \
-        -e '/HOSTOSsize/d'  \
-        -e '/HostUseALLdata/d'  \
-        -e '/HOSTDATAsize/d'    \
-        -e '/HOSTuprootfstype/d'    \
-        -e '/HostUseSWAP/d' \
-        -e '/HOSTSWAPsize/d  ' /tmp/templates/settings/syssettings/settings.txt  >  /tmp/settings.new
-    mv  /tmp/settings.new /tmp/templates/settings/syssettings/settings.txt
-}
-
-case $1 in
-        full_install_it )         full_install       ;;
-
-        NETBOOT)
-echo "-----------------------------------------------------------------------3-----"
-         netboot-full_install   ;;
-
-        find_update)
-            #TRY TO mount first partition of drive
-            #copy /etc/systemconfig to live,  import settings into db
-            #umount drive
-            $run mount_it $disk
-                if [ -f /new_boot/etc/systemconfig ]
-                then
-                ###########ADD templates
-                mkdir -p $TEMP_TEMPLATES
-                cp -pr /new_boot/$TEMPLATES  $TEMP_TEMPLATES
-                SANE_SYSETTINGS
-                cp -rp $TEMP_TEMPLATES/settings $TEMPLATES/
-
-
-                cp /new_boot/etc/systemconfig /etc/systemconfig
-                cp -rf  /new_boot/etc /tmp/etc
-                cp -rf /new_boot/var/lib/oss  /tmp/oss
-
-                $MV_ROOT/bin/restore_default_settings.sh -c restore -t syssettings -h $MVHOSTNAME  -d 127.0.0.1
-                fi
-            $run umount_it $disk
-            ;;
-
-        upgrade_it)
-                #"$MV_ROOT/bin/install_proxy.sh upgrade_it " + install_drive + " " + rootfs +  "&"
-                upgrade
-
-            ;;
-        disk_model_it)
-                        model="unknown"
-                            size="xxx"
-                        case $2 in
-
-                            h* )
-                                    model=`cat /proc/ide/$2/model`
-                                    ;;
-                            s*)     model=`sginfo /dev/$2|grep Product|awk ' { print $2 } '`
-                                    ;;
-                        esac
-                                size=`parted /dev/$2  print |grep Disk|awk  ' { print $3 } '  `
-
-
-                                echo ""$model" $size " >/tmp/model
-
-            ;;
-        network_check_it)
-                        #Should never return from check_network
-                        case $2 in
-                                setup_network)
-                                         vnc_check
-                                         install_network_setup
-                                ;;
-
-                                check_self)
-                                            myipdefault=`ifconfig  | grep -C1 $default_interface| grep -v $default_interface | cut -d: -f2 | awk '{ print $1}'`
-                                            ping -c 1 $myipdefault
-                                                    if [ ! $? = 0 ]
-                                                    then
-                                                        exit 3
-                                                        #can't ping yourself
-                                                    fi
-                                ;;
-                                check_gw)
-                                            #check gateway
-                                            mygwdefault=`/sbin/route |grep $default_interface|grep UG|awk '{ print $2}'`
-					                        if  [ !  x$mygwdefault = x ]
-					                        then
-	                                            ping -c 1 $mygwdefault
-        	                                    if [ ! $? = 0 ]
-                	                            then
-                        	                        exit 4
-                                	      	    fi
-				                            fi
-                                ;;
-                                check_ns)
-                                            #check nameserver
-                                                    mydns=`cat /etc/resolv.conf|grep nameserver|head -1|awk '{ print $2}'`
-                                                    ping -c 1 $mydns
-                                                    if [ ! $? = 0 ]
-                                                    then
-                                                        exit 5
-                                                    fi
-                                ;;
-                                check_names)
-                                            host google.com
-                                            if [ ! $? = 0 ]
-                                            then
-                                                exit 6
-                                            fi
-                                ;;
-                                host_names)
-                                            host $hostname
-                                            if [  $? = 0 ]
-                                            then
-                                                exit 7
-                                            fi
-                                ;;
-
-                            esac
-                        exit 0
-            ;;
-
-
-        * )
-            state=`cat /tmp/.install_state`
-            if  [  x"${state}" =  "xConfiguring system" ]
-            then
-                progress ""
-            else
-
-                if [ -f /tmp/.startsize.io ]
-                then
-                     . /tmp/.startsize.io
-                    #finding the drive
-                    ddrive=`df |  grep $mountpoint | head -n1 | awk -F/ ' { print $3 } ' | cut -d" " -f 1|cut -b1,2,3 `
-                    used=`statgrab -M disk.|grep ${ddrive}.write_bytes|cut -d= -f 2|tr -d " "`
-                    used=`echo $used-$STARTSIZE|bc`
-                        #echo $used
-                fi
-
-        if [ ! x$used = x ]
-            then
-                .  /root/.install_size
-                #somehow find if it's an install or update
-                if [ -f /tmp/.this_is_upgrade ]
-                then
-                    total=$UPGRADESIZE
-                else
-                    total=$TOTALSIZE
-                fi
-            percent=`echo "scale=2 ;  ($used/$total) * 100 " |bc `
-            cond2=$(echo "$percent > 100" |bc  )
-            if [ $cond2 -eq 1  ]
-            then
-            percent=100
-            fi
-            cond3=$(echo "$percent < 3" |bc )
-            if [ $cond3 -eq 0   ]
-                then
-                    progress $percent
-                fi
-            fi
-        fi
-        ;;
-esac
-
-
-