live-installer is no longer used

3 files changed, 0 insertions, 541 deletions

diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap b/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
deleted file mode 100644
index 8e453b9..0000000
--- a/abs/core/live-installer/templates/remotes/gr8zap/lircd.conf.streamzap
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# this config file was automatically generated
-# using lirc-0.7.1-CVS(serial) on Fri Feb  4 23:20:56 2005
-#
-# contributed by Christoph Bartelmus
-#
-# brand:                       Streamzap
-# model no. of remote control: PC Remote
-# devices being controlled by this remote: USB receiver
-#
-
-begin remote
-
-  name  Streamzap_PC_Remote
-  bits            6
-  flags RC5|CONST_LENGTH
-  eps            30
-  aeps          100
-
-  one           889  889
-  zero          889  889
-  plead         889
-  pre_data_bits   8
-  pre_data       0xA3
-  gap          108344
-  toggle_bit      2
-
-
-      begin codes
-          0                        0x00
-          1                        0x01
-          2                        0x02
-          3                        0x03
-          4                        0x04
-          5                        0x05
-          6                        0x06
-          7                        0x07
-          8                        0x08
-          9                        0x09
-          POWER                    0x0A
-          MUTE                     0x0B
-          CH_UP                    0x0C
-          VOL_UP                   0x0D
-          CH_DOWN                  0x0E
-          VOL_DOWN                 0x0F
-          UP                       0x10
-          LEFT                     0x11
-          OK                       0x12
-          RIGHT                    0x13
-          DOWN                     0x14
-          MENU                     0x15
-          EXIT                     0x16
-          PLAY                     0x17
-          PAUSE                    0x18
-          STOP                     0x19
-          |<<                      0x1A
-          >>|                      0x1B
-          RECORD                   0x1C
-          <<                       0x1D
-          >>                       0x1E
-          RED                      0x20
-          GREEN                    0x21
-          YELLOW                   0x22
-          BLUE                     0x23
-      end codes
-
-end remote
-
-
diff --git a/abs/core/live-installer/templates/remotes/gr8zap/lircrc b/abs/core/live-installer/templates/remotes/gr8zap/lircrc
deleted file mode 100644
index 6f86bfe..0000000
--- a/abs/core/live-installer/templates/remotes/gr8zap/lircrc
+++ /dev/null
@@ -1,472 +0,0 @@
-# StreamZap Remote
-# 'config' must either be a literal key, e.g. 'config = l' or must
-# refer to a defined key in MythTV, e.g. 'config = PLAY'
-begin
-   prog = mythtv
-   button = 0
-   config = 0
-end
-
-begin
-   prog = mythtv
-   button = 1
-   config = 1
-end
-
-begin
-   prog = mythtv
-   button = 2
-   config = 2
-end
-
-begin
-   prog = mythtv
-   button = 3
-   config = 3
-end
-
-begin
-   prog = mythtv
-   button = 4
-   config = 4
-end
-
-begin
-   prog = mythtv
-   button = 5
-   config = 5
-end
-
-begin
-   prog = mythtv
-   button = 6
-   config = 6
-end
-
-begin
-   prog = mythtv
-   button = 7
-   config = 7
-end
-
-begin
-   prog = mythtv
-   button = 8
-   config = 8
-end
-
-begin
-   prog = mythtv
-   button = 9
-   config = 9
-end
-
-begin
-   prog = mythtv
-   button = POWER
-   config = Esc
-end
-
-# ???
-begin
-   prog = mythtv
-   button = MUTE
-   config = F9
-end
-
-begin
-   prog = mythtv
-   button = CH_UP
-   repeat = 3
-   config = Up
-end
-
-begin
-   prog = mythtv
-   button = VOL_UP
-   repeat = 3
-   config = ]
-end
-
-begin
-   prog = mythtv
-   button = CH_DOWN
-   repeat = 3
-   config = Down
-end
-
-begin
-   prog = mythtv
-   button = VOL_DOWN
-   repeat = 3
-   config = [
-end
-
-begin
-   prog = mythtv
-   button = UP
-   repeat = 3
-   config = Up
-end
-
-begin
-   prog = mythtv
-   button = LEFT
-# navigates, or skips back during playback or live tv.
-   config = Left
-end
-
-begin
-   prog = mythtv
-   button = OK
-   config = Return
-end
-
-begin
-   prog = mythtv
-   button = RIGHT
-# navigates, or skips forwards during playback or live tv. 
-   config = Right
-end
-
-begin
-   prog = mythtv
-   button = DOWN
-   repeat = 3
-   config = Down
-end
-
-begin
-   prog = mythtv
-   button = MENU
-   config = m
-end
-
-begin
-   prog = mythtv
-   button = EXIT
-   config = Esc
-end
-
-begin
-   prog = mythtv
-   button = PLAY
-   config = l
-end
-
-begin
-   prog = mythtv
-   button = PAUSE
-   config = p
-end
-
-begin
-   prog = mythtv
-   button = STOP
-   config = Esc
-end
-
-begin
-   prog = mythtv
-   # skip backward
-   button = |<<
-   config = PgUp
-end
-
-begin
-   prog = mythtv
-   # skip forward
-   button = >>|
-   config = PgDown
-end
-
-begin
-   prog = mythtv
-   button = RECORD
-   config = r
-end
-
-begin
-   prog = mythtv
-   # rewind
-   button = <<
-   config = <
-end
-
-begin
-   prog = mythtv
-   # fast forward
-   button = >>
-   config = >
-end
-
-begin
-   prog = mythtv
-   button = RED
-   # Delete
-   config = z
-end
-
-begin
-   prog = mythtv
-   button = GREEN
-   # Info
-   config = i
-end
-
-begin
-   prog = mythtv
-   button = YELLOW
-   # change aspect ratio
-   config = w
-end
-
-begin
-   prog = mythtv
-   button = BLUE
-   config = Tab
-end
-
-# MPLAYER
-begin
-   prog = mplayer
-   button = POWER
-   config = quit
-end
-
-begin
-   prog = mplayer
-   button = MUTE
-   config = mute
-end
-
-begin
-   prog = mplayer
-   button = VOL_UP
-   repeat = 3
-   config = volume +1
-end
-
-begin
-   prog = mplayer
-   button = VOL_DOWN
-   repeat = 3
-   config = volume -1
-end
-
-begin
-   prog = mplayer
-   button = UP
-   repeat = 3
-   config = seek +10
-end
-
-begin
-   prog = mplayer
-   button = LEFT
-# navigates, or skips back during playback or live tv.
-   config = seek -30
-end
-
-begin
-   prog = mplayer
-   button = RIGHT
-# navigates, or skips forwards during playback or live tv. 
-   config = seek +60
-end
-
-begin
-   prog = mplayer
-   button = DOWN
-   repeat = 3
-   config = seek -10
-end
-
-begin
-   prog = mplayer
-   button = EXIT
-   config = quit
-end
-
-begin
-   prog = mplayer
-   button = play
-   config = speed_set 1.0
-end
-
-begin
-    prog = mplayer
-    button = pause
-    config = pause
-end
-
-begin
-   prog = mplayer
-   button = STOP
-   config = quit
-end
-
-begin
-   prog = mplayer
-   # skip backward
-   button = |<<
-   config = seek -600
-end
-
-begin
-   prog = mplayer
-   # skip forward
-   button = >>|
-   config = seek +600
-end
-
-begin
-   prog = mplayer
-   # slow forward
-   button = <<
-   config = speed_mult 0.5
-end
-
-begin
-   prog = mplayer
-   # fast forward
-   button = >>
-   config = speed_mult 2.0
-end
-
-### Xine lirc setup By AnDy!
-
-begin
-prog = xine
-button = PLAY
-repeat = 3
-config = Play
-end
-
-begin
-prog = xine
-button = STOP
-repeat = 3
-config = Stop
-end
-
-begin
-prog = xine
-button = PAUSE
-repeat = 3
-config = Pause
-end
-
-begin
-prog = xine
-button = UP
-repeat = 3
-config = EventUp
-end
-
-begin
-prog = xine
-button = DOWN
-repeat = 3
-config = EventDown
-end
-
-begin
-prog = xine
-button = LEFT
-repeat = 3
-config = EventLeft
-end
-
-begin
-prog = xine
-button = RIGHT
-repeat = 3
-config = EventRight
-end
-
-begin
-prog = xine
-button = OK
-repeat = 3
-config = EventSelect
-end
-
-begin
-prog = xine
-button = EXIT
-repeat = 3
-config = Menu
-end
-
-begin
-prog = xine
-button = >>
-repeat = 3
-#config = SpeedFaster
-config = SeekRelative+60
-end
-
-begin
-prog = xine
-button = <<
-repeat = 3
-#config = SpeedSlower
-config = SeekRelative-60
-end
-
-begin
-prog = xine
-button = VOL_UP
-repeat = 3
-config = Volume+
-end
-
-begin
-prog = xine
-button = VOL_DOWN
-repeat = 3
-config = Volume-
-end
-
-begin
-prog = xine
-button = MUTE
-repeat = 3
-config = Mute
-end
-
-begin
-prog = xine
-button = MENU
-repeat = 3
-config = RootMenu
-end
-
-begin
-prog = xine
-button = >>|
-repeat = 3
-config = EventNext
-end
-
-begin
-prog = xine
-button = |<<
-repeat = 3
-config = EventPrior
-end
-
-begin
-prog = xine
-button = GREEN
-repeat = 3
-config = OSDStreamInfos
-end
-
-begin
-prog = xine
-button = POWER
-repeat = 3
-config = Quit
-end
diff --git a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg b/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg
deleted file mode 100644
index 4d1a5fe..0000000
--- a/abs/core/live-installer/templates/remotes/gr8zap/preview.jpg
+++ /dev/null