system-templates: remove ncid.conf files..added list of area codes

1 files changed, 0 insertions, 143 deletions

diff --git a/abs/core/system-templates/templates/ncidd.conf.template b/abs/core/system-templates/templates/ncidd.conf.template
deleted file mode 100644
index daa2e79..0000000
--- a/abs/core/system-templates/templates/ncidd.conf.template
+++ /dev/null
@@ -1,143 +0,0 @@
-# ncid - Network CallerID Server Config File
-
-################################
-# Definitions and Line formats #
-################################
-
-# lines can be blank, or start with the words: send, set #
-#
-# A line is divided into words, separated by spaces
-#
-# A word is either a string of non-blank characters, everything
-# between double quotes, or an equal sign.
-#
-# SEND LINE FORMAT:
-#   send DATATYPE [DATATYPE] ...
-#        where DATATYPE = cidlog, cidinfo
-#
-# SET LINE FORMAT:
-#   set ITEM = VALUE [ITEM = VALUE] ...
-#       where ITEM = cidalias, cidlog, datalog, initcid, initstr,
-#                    lockfile, port, ttyclocal, ttyport, ttyspeed,
-#                    nomodem
-
-############################
-# Log and Info for Clients #
-############################
-
-# Send the call log to a client when connected
-# The default is not to send the call log file
-send cidlog
-
-# Send call info (LINE and RING) to a client at each ring
-# The default is not to send the call info line
-send cidinfo
-
-############################
-# NCID Communications Port #
-############################
-
-# The default TCP/IP port is 3333
- set port = 3333
-
-#######################
-# Alias and Log Files #
-#######################
-
-# The default CID alias file: /etc/ncid/ncidd.alias
-# set cidalias = /etc/ncid/ncidd.alias
-
-# The default CID call log file: /var/log/cidcall.log
-# the log file must exist, ncidd will not create it
-# (also make the change in /etc/logrotate.d/ncidd
-#  and also /etc/ncid/ncidrotate.conf)
-# set cidlog = /var/log/cidcall.log
-
-# The default tty data log file: /var/log/ciddata.log
-# the log file must exist, ncidd will not create it
-#  (also make the change in /etc/logrotate.d/ncidd
-#   and also /etc/ncid/ncidrotate.conf)
-# set datalog = /var/log/ciddata.log
-
-#####################
-# TTY Configuration #
-#####################
-
-# The default tty port: /dev/modem
-# set ttyport = /dev/cu.modem # Macintosh OS X
- set ttyport = /dev/ttyS1
-
-# The default tty port speed: 19200
-# The tty speed can be one of: 38400, 19200, 9600, 4800
-# set ttyspeed = 4800 # NetCallerID port speed
-
-# Ignore tty control signals for internal modems and 3 wire serial cables
-#   Disable tty control signals: ttyclocal = 1
-#   Enable tty control signals: ttyclocal = 0 (default)
-# set ttyclocal = 1
-
-# The lockfile name is generated automatically
-# If tty port is /dev/modem, lockfile is: /var/lock/LCK..modem
-# set lockfile = /var/lock/LCK..ttyS0
-
-#####################
-# Modem or No Modem #
-#####################
-
-# Obtain CallerID from a CID device or a modem
-#  device: nomodem = 1 (do not send AT commands)
-#  modem: nomodem = 0 (default - send AT commands)
-# set nomodem = 1
-
-########################
-# Modem Initialization #
-########################
-
-# The default modem initialization is: "AT Z S0=0 E1 V1 Q0"
-# set initstr = "ATE1V1Q0"
-#
-# Alternate modem initialization string
-# set initstr = "AT&FE1V1Q0+VIP"
-
-# Addon strings to set modem for Distinctive Ring:
-#   http://www.modemsite.com/56k/dring.asp
-#
-# 3Com/USR/TI chipset: ATS41=1
-#   Reported Ring Codes: RING A, RING B, RING C
-# Rockwell/Conexant chipset: AT-SDR=7
-#   Reported Ring Codes: RING 1, RING 2, RING 3
-# Lucent/Agere chipset: AT+VDR=1,0
-#   Reported DROF/DRON messages: DRON=5 DROF=11, DRON=5 DROF=34
-#
-# Example adds 3Com DR to the default modem initialization
-# set initstr = "ATE1V1Q0S41=1"
-
-# The default for ncidd is to try two CID strings to setup
-# CallerID: "AT+VCID=1" and if that fails: "AT#CID=1".
-# set initcid = "AT#CID=1"
-#
-# Alternate CID strings to try if default does not work:
-# set initcid = "AT+FCLASS=8;+VCID=1"
-# set initcid = "AT-STE=1;+VCID=1"
-# set initcid = "AT-STE=1;#CID=1"
-
-#################
-# TiVo Settings #
-#################
-# set ttyclocal = 1 # TiVo requires CLOCAL
-# set ttyport = /dev/ttyS1 # TiVo Modem Port
-# set lockfile = /var/tmp/modemlock # needed for TiVo Modem Port
-#
-# To use a modem on the TiVo serial port
-#   Tivo (stereo mini jack) ->
-#   -> (stereo mini plug) TiVo serial cable (9-pin male) ->
-#   -> (9-pin Female) PC modem cable (25-pin Male ->
-#   -> (25-pin Female) Modem
-# if the modem has switches, disable DTR
-# Use this string to set the modem before attaching it to the TiVo:
-#   AT&F0&D0&B1&W
-#
-# set ttyport = /dev/ttyS3 # TiVo Serial Port
-#
-# End TiVo Settings
-