xymon: add hddtemp module

7 files changed, 151 insertions, 24 deletions

diff --git a/abs/core/xymon/PKGBUILD b/abs/core/xymon/PKGBUILD
index f171831..e7b9577 100755
--- a/abs/core/xymon/PKGBUILD
+++ b/abs/core/xymon/PKGBUILD
@@ -1,7 +1,7 @@
 pkgbase=xymon
 pkgname=('xymonserver' 'xymonclient')
 pkgver=4.3.17
-pkgrel=12
+pkgrel=13
 pkgdesc="Xymon is a system for monitoring of hosts and networks"
 license="GPL"
 arch=('i686' 'x86_64')
@@ -9,7 +9,7 @@ url="http://www.xymon.com/"
 source=("https://downloads.sourceforge.net/project/xymon/Xymon/$pkgver/$pkgbase-$pkgver.tar.gz"
         'hobbitadd.py'
         'xymon_ghost_check'
-        'graph.cfg.diff'
+        'graphs.cfg.diff'
         'xymonserver.cfg.diff'
         'tasks.d.mv'
         'clientlaunch.cfg.patch'
@@ -25,6 +25,7 @@ source=("https://downloads.sourceforge.net/project/xymon/Xymon/$pkgver/$pkgbase-
         'alerts.cfg'
         'hobbit_myth_data.py'
         'xymon-gputemp.sh'
+        'xymon-hddtemp.sh'
         'xymon-smart.sh'
         'logrotate-server.xymon'
         'logrotate-client.xymon'
@@ -83,6 +84,7 @@ package_xymonserver(){
     install -D -m755 ${srcdir}/hobbit_myth_data.py ${pkgdir}/home/xymon/server/ext/hobbit_myth_data.py
     install -D -m755 ${srcdir}/hobbit-mem-myth.sh ${pkgdir}/home/xymon/server/ext/hobbit-mem-myth.sh
     install -D -m755 ${srcdir}/xymon-gputemp.sh ${pkgdir}/home/xymon/server/ext/xymon-gputemp.sh
+    install -D -m755 ${srcdir}/xymon-hddtemp.sh ${pkgdir}/home/xymon/server/ext/xymon-hddtemp.sh
     install -D -m755 ${srcdir}/xymon-smart.sh ${pkgdir}/home/xymon/server/ext/xymon-smart.sh
     install -D -m755 ${srcdir}/log_list.sh ${pkgdir}/home/xymon/client/bin/log_list.sh
 
@@ -110,7 +112,7 @@ package_xymonserver(){
     #apply patches to conf file
     install -D -m775 ${srcdir}/tasks.d.mv ${pkgdir}/home/xymon/etc/tasks.d/mv.cfg
     cd ${pkgdir}/home/xymon/etc
-    patch -p0 < ${srcdir}/graph.cfg.diff || return 1
+    patch -p0 < ${srcdir}/graphs.cfg.diff || return 1
     patch -p0 < ${srcdir}/xymonserver.cfg.diff || return 1
     patch -p3 < ${srcdir}/client-local.cfg.patch || return 1
     patch -p3 < ${srcdir}/hosts.cfg.patch || return 1
@@ -146,6 +148,7 @@ package_xymonclient(){
     install -D -m644 ${srcdir}/logrotate-client.xymon ${pkgdir}/etc/logrotate.d/xymon-client
     install -D -m755 ${srcdir}/hobbit-mem-myth.sh ${pkgdir}/home/xymon/client/ext/hobbit-mem-myth.sh
     install -D -m755 ${srcdir}/xymon-gputemp.sh ${pkgdir}/home/xymon/client/ext/xymon-gputemp.sh
+    install -D -m755 ${srcdir}/xymon-hddtemp.sh ${pkgdir}/home/xymon/client/ext/xymon-hddtemp.sh
     install -D -m755 ${srcdir}/xymon-smart.sh ${pkgdir}/home/xymon/client/ext/xymon-smart.sh
     cp -rp ${pkgdir}/../xymonserver/home/xymon/client/ ${pkgdir}/home/xymon/
 
@@ -158,10 +161,10 @@ package_xymonclient(){
 md5sums=('d8d119a777e7b7204d1292fb27314312'
          'a0fbb9cbeb3600a40943e6205790f22f'
          'c60b0d59bb39505ee3d62c6dd65429c5'
-         '53f1af1054d3c70f4d6b6fe952cf7e11'
-         '510f36dfada9439f09327da5278bcdb1'
-         'c9f93372dce3489e23fb601a941818bb'
-         '8d024dfc58bacdfedfbddf8e78fd53eb'
+         '92bd5e8279c688fd854d514443bc733c'
+         'f0fca78520f434918bd1be717d165073'
+         'a19c8c546dcd95049476bb19f9d4e3ae'
+         '079833e3af5d74b93a86b5819dbf453b'
          'b2f98ac0df013332deedc1efae0a270d'
          '4a8244c1bb44fe35ca7372355b01cec4'
          'aa7c2eec6cd894dc171e90a4eed69de1'
@@ -176,7 +179,8 @@ md5sums=('d8d119a777e7b7204d1292fb27314312'
          '9af2ad60ac4c3cb653754618f603e311'
          'a9b7f0a22f29f55b2928160bc44f2c14'
          '6452d891d88bb46d07bcf7790a523ad0'
-         '1348bef3cdd20ec0ea66d61ac1834847'
+         '374ce9cc7b7cb8ae04bf89ed4d79a7be'
+         '6eb413053fde2110859c30737032b916'
          'b4e8641e97e6b689dbc634af785e6799'
          'e2844513e2c92e8b5084818f3b2a478d'
          '98e9242ae346f729b14cb195786571f2'
diff --git a/abs/core/xymon/clientlaunch.cfg.patch b/abs/core/xymon/clientlaunch.cfg.patch
index 0348c6c..980da4c 100755
--- a/abs/core/xymon/clientlaunch.cfg.patch
+++ b/abs/core/xymon/clientlaunch.cfg.patch
@@ -1,6 +1,6 @@
 --- clientlaunch.cfg.orig	2015-02-19 22:50:43.102571615 +0000
-+++ clientlaunch.cfg	2015-02-20 14:41:10.594633850 +0000
-@@ -26,3 +26,20 @@
++++ clientlaunch.cfg	2015-03-04 23:45:50.087484982 +0000
+@@ -26,3 +26,26 @@
  	LOGFILE $XYMONCLIENTLOGS/xymonclient.log
  	INTERVAL 5m
  
@@ -16,6 +16,12 @@
 +       LOGFILE $XYMONCLIENTLOGS/xymon-gputemp.log
 +       INTERVAL 5m
 +
++[hddtemp]
++       ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg
++       CMD  /home/xymon/client/ext/xymon-hddtemp.sh
++       LOGFILE $XYMONCLIENTLOGS/xymon-hddtemp.log
++       INTERVAL 5m
++
 +[smart]
 +       ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg
 +       CMD  /home/xymon/client/ext/xymon-smart.sh
diff --git a/abs/core/xymon/graphs.cfg.diff b/abs/core/xymon/graphs.cfg.diff
new file mode 100755
index 0000000..8b1b438
--- /dev/null
+++ b/abs/core/xymon/graphs.cfg.diff
@@ -0,0 +1,63 @@
+--- graphs.cfg.orig	2015-03-04 21:46:31.493387574 +0000
++++ graphs.cfg	2015-03-04 21:47:26.972936010 +0000
+@@ -2100,4 +2100,60 @@
+ 	GPRINT:qlen@RRDIDX@:AVERAGE: %6.1lf (avg)\n
+ 
+ ########### end of ifmib graphs ###########
++[storage]
++       TITLE Storage Groups
++       YAXIS  recordings
++       DEF:storage1=storage.rrd:rectvtotal:AVERAGE
++       LINE2:storage1#00CCCC:current recorded
+ 
++       DEF:rectime=storage.rrd:rectvtime:AVERAGE
++       LINE2:rectime#000000:current recorded time
++
++       DEF:livetime=storage.rrd:livetvtime:AVERAGE
++       LINE2:livetime#00CC11:current live  time
++
++
++[memmbe]
++       TITLE Memory usage for MythBackend
++       YAXIS mythbackend
++       DEF:vmsize=memmbe.rrd:VmSize:AVERAGE
++       LINE2:vmsize#00CCCC:vmsize
++
++       DEF:vmpeak=memmbe.rrd:VmPeak:AVERAGE
++       LINE2:vmpeak#000000:vmpeak
++
++       DEF:vmrss=memmbe.rrd:VmRSS:AVERAGE
++       LINE2:vmrss#00CC11:vmrss
++
++[memmfe]
++       TITLE Memory usage for MythFrontend
++       YAXIS mythfrontend
++       DEF:vmsize=memmfe.rrd:VmSize:AVERAGE
++       LINE2:vmsize#00CCCC:vmsize
++
++       DEF:vmpeak=memmfe.rrd:VmPeak:AVERAGE
++       LINE2:vmpeak#000000:vmpeak
++
++       DEF:vmrss=memmfe.rrd:VmRSS:AVERAGE
++       LINE2:vmrss#00CC11:vmrss
++
++[gputemp]
++       TITLE GPU Temperature
++       YAXIS Temperature
++       DEF:gputemp=gputemp.rrd:GPUTEMP:AVERAGE
++       LINE2:gputemp#00CC11:gputemp
++       GPRINT:gputemp:LAST: \: %5.1lf  (cur)
++       GPRINT:gputemp:MAX: \: %5.1lf  (max)
++       GPRINT:gputemp:MIN: \: %5.1lf  (min)
++       GPRINT:gputemp:AVERAGE: \: %5.1lf  (avg)\n
++
++[hddtemp]
++       FNPATTERN ^hddtemp.(.*).rrd
++       TITLE Hard Drive Temperatures
++       YAXIS Celsius
++       DEF:p@RRDIDX@=@RRDFN@:lambda:AVERAGE
++       LINE2:p@RRDIDX@#@COLOR@:@RRDPARAM@\n
++       GPRINT:p@RRDIDX@:LAST: %5.1lf °C  (cur)
++       GPRINT:p@RRDIDX@:MAX: \: %5.1lf °C  (max)
++       GPRINT:p@RRDIDX@:MIN: \: %5.1lf °C  (min)
++       GPRINT:p@RRDIDX@:AVERAGE: \: %5.1lf °C  (avg)\n
diff --git a/abs/core/xymon/tasks.d.mv b/abs/core/xymon/tasks.d.mv
index f8ce177..2cdaebb 100755
--- a/abs/core/xymon/tasks.d.mv
+++ b/abs/core/xymon/tasks.d.mv
@@ -44,6 +44,12 @@
        LOGFILE $BBSERVERLOGS/xymon-gputemp.log
        INTERVAL 5m
 
+[hddtemp]
+       ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg
+       CMD  /home/xymon/server/ext/xymon-hddtemp.sh
+       LOGFILE $BBSERVERLOGS/xymon-hddtemp.log
+       INTERVAL 5m
+
 [smart]
        ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg
        CMD  /home/xymon/server/ext/xymon-smart.sh
diff --git a/abs/core/xymon/xymon-hddtemp.sh b/abs/core/xymon/xymon-hddtemp.sh
new file mode 100755
index 0000000..6961919
--- /dev/null
+++ b/abs/core/xymon/xymon-hddtemp.sh
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+# NOTE: Must be run as root, so you probably need to setup sudo for this.
+
+ls /dev/disk/by-id/* | grep -ve '-part' -ve '/wwn-' |
+while read DISK
+do
+    DISKDEV=`ls -l $DISK | awk -F/ '{print $NF}'`
+    DISKNAME=`echo $DISK | awk -F/ '{print $5}'`
+
+    #check if disk is removable
+    RM=0
+    RM=`cat /sys/block/$DISKDEV/removable`
+    if test $RM -ne 0
+    then
+        continue
+    fi
+
+    hddtemp=`sudo smartctl -A $DISK | grep Temperature_Celsius | awk '{print $10}'`
+
+    TEMP=": $hddtemp"
+    if [[ $hddtemp == "" ]]
+    then
+        TEMP="- No Temp Sensor Found"
+        COLOR="4&clear"
+    elif test $hddtemp -gt 50
+    then
+        COLOR="1&red"
+    elif test $hddtemp -ge 45
+    then
+        COLOR="2&yellow"
+    else
+        COLOR="3&green"
+    fi
+
+    echo "${COLOR} $DISKNAME $TEMP"
+
+done > /tmp/hddcheck
+
+COLOR=`cat /tmp/hddcheck | awk '{print $1}' | sort | uniq | head -1 | cut -c3-`
+
+# Report status to Xymon Server
+$XYMON $XYMSRV "status ${MACHINE}.hddtemp ${COLOR} Hard Drive Temperatures (in &degC)
+
+`cat /tmp/hddcheck | cut -c2-`
+"
+
+rm -f /tmp/hddcheck
+
+exit 0
diff --git a/abs/core/xymon/xymon-smart.sh b/abs/core/xymon/xymon-smart.sh
index 1ad3cc7..f951158 100755
--- a/abs/core/xymon/xymon-smart.sh
+++ b/abs/core/xymon/xymon-smart.sh
@@ -4,15 +4,13 @@
 
 if test -f /tmp/dres; then rm -f /tmp/dres; fi
 
-# MODIFY below to match your setup - the "scsi-SATA" is pretty generic, but you
-# can add more disks if you like. E.g. I have a USB disk permanently plugged in.
-
-ls /dev/disk/by-id/scsi-* /dev/disk/by-id/ata-* /dev/disk/by-id/usb-* | grep -v -- -part | sort |
+ls /dev/disk/by-id/* | grep -ve '-part' -ve '/wwn-' |
 while read DISK
 do
     DISKDEV=`ls -l $DISK | awk -F/ '{print $NF}'`
 
     #check if disk is removable
+    RM=0
     RM=`cat /sys/block/$DISKDEV/removable`
     if test $RM -ne 0
     then
@@ -62,4 +60,3 @@ $XYMON $XYMSRV "status ${MACHINE}.smart ${COLOR} SMART Health Check
 rm -f /tmp/dres /tmp/dcheck
 
 exit 0
-
diff --git a/abs/core/xymon/xymonserver.cfg.diff b/abs/core/xymon/xymonserver.cfg.diff
index 5432767..48631dc 100755
--- a/abs/core/xymon/xymonserver.cfg.diff
+++ b/abs/core/xymon/xymonserver.cfg.diff
@@ -1,30 +1,31 @@
---- xymonserver.cfg.orig	2014-10-25 22:05:16.611876375 -0500
-+++ xymonserver.cfg	2014-10-25 22:07:35.818604144 -0500
-@@ -145,6 +145,11 @@
+--- xymonserver.cfg.orig	2015-03-04 21:28:58.618598840 +0000
++++ xymonserver.cfg	2015-03-04 21:31:55.352569106 +0000
+@@ -145,6 +145,12 @@
  RRDHEIGHT="120"
  RRDWIDTH="576"		# The RRD's contain 576 data points, so this is a good value
-
+ 
 +NCV_storage="*:GAUGE"
 +NCV_memmbe="*:GAUGE"
 +NCV_memmfe="*:GAUGE"
 +NCV_gputemp="*:GAUGE"
++SPLITNCV_hddtemp="*:GAUGE"
 +
  # TEST2RRD defines the status- and data-messages you want to collect RRD data
  # about. You will normally not need to modify this, unless you have added a
  # script to pick up RRD data from custom tests (the xymond_rrd --extra-script
-@@ -156,11 +161,13 @@
+@@ -156,11 +162,13 @@
  #
  # This is also used by the svcstatus.cgi script to determine if the detailed
  # status view of a test should include a graph.
 -TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond"
 +#TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond"
-+TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,storage=ncv,memmbe=ncv,memmfe=ncv,gputemp=ncv,smart"
-
++TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,storage=ncv,memmbe=ncv,memmfe=ncv,gputemp=ncv,hddtemp=ncv,smart"
+ 
  # This defines which RRD files to include on the "trends" column webpage,
  # and the order in which they appear.
 -GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat,iostat,tcp.http,tcp,ncv,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond"
 +#GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat,iostat,tcp.http,tcp,ncv,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond"
-+GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat,iostat,tcp.http,tcp,ncv,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,storage,memmbe,memmfe,gputemp"
-
++GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat,iostat,tcp.http,tcp,ncv,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,storage,memmbe,memmfe,gputemp,hddtemp"
+ 
  # These two settings can be used to restrict what filesystems are being
  # tracked (i.e. have their utilisation graphed) by Xymon.