Merge branch 'testing'

# By James Meyer (1091) and others
# Via James Meyer (5) and others
* testing: (1148 commits)
  LinHES-config: during install don't kill off lirc.  This keeps the remote active all the way to the finish
  Change version numbers to 8.0  to match the release number. LinHES-conifg LinHES-system mythdb-initial runit-scripts supplemental-web
  LinHES-conifig: mv_install.py  for the last partition don't go all the way to the end.  Gotta leave room for gpt tables.
  xf86-video-ati: xorg ati driver.
  LinHES-config: timezip.py  add syncing up of parental lvl passwords and starting level with MBE.
  LinHES-system: correct the logic for breaking out of the wmctrl loop.   As written it would break out of the inner loop..but not the 60 iteration loop.
  e16_theme_settings:  remove slide-in prop for new windows.   For whatever reason this was preventing mplayer from being positioned correctly for appletrailers.
  LinHES-config, mythinstall:  change  case of hd_pvr and   serial to all lower refs #902
  zilog-firmware:   firmware for TX support of the hdpvr and pvr-150 In general I can't recommend anybody using these transmitters  but including the firmware just in case someone really wants to
  linhes-udev-rules:  added hdprv_lirc rule. All of these lirc rules are limited to exactly one device.  If more then one device is present then only the last device in init will get the symlink
  runit-scripts:  fix logging for igdeamon,   add support to remote init script so that the blaster is always the first device in the chain. added support specificly for hd_pvr
  LinHES-system:   add lh_system_restore and lh_system_backup.  These scripts are called from the mythmenu. refs #900
  iguanair: rebuild with python 2.7
  LinHES-system: msg_daemon.py fix  init and nasty bug related to timeout. In a nutshell timeout wouldn't work unless a msg without a timeout was called first.
  linhes-udev-rules:  add rules for mce,streamzap,serial  lirc devices.
  mythinstall: recompile for matching libs
  mythtv:  latest .25-fixes  and change mythbackup/restore call lh_system_$op   to replace mythbackup/mythrestore.  mythbackup no longer works correctly with the new windowmanager
  linhes-scripts: myth2mp3, myth2x264, myth2xvid: use mythutil to get cutlist
  LinHES-config, supplimental-web:  Fix proxy numbering for Ceton infiniTV
  linhes-system:  add additional stuff to the system backup and also introduced an exclude file. The exclude/include files are locate in /home/mythtv/backup_config/
  ...

4 files changed, 243 insertions, 0 deletions

diff --git a/abs/extra/blas/LICENSE.blas b/abs/extra/blas/LICENSE.blas
new file mode 100644
index 0000000..79f3838
--- /dev/null
+++ b/abs/extra/blas/LICENSE.blas
@@ -0,0 +1,19 @@
+From: http://www.netlib.org/blas/faq.html
+
+ 2) Are there legal restrictions on the use of BLAS reference
+    implementation software? 
+
+The reference BLAS is a freely-available software package. It is
+available from netlib via anonymous ftp and the World Wide Web. Thus,
+it can be included in commercial software packages (and has been). We
+only ask that proper credit be given to the authors. 
+
+Like all software, it is copyrighted. It is not trademarked, but we do
+ask the following: 
+
+If you modify the source for these routines we ask that you change the
+name of the routine and comment the changes made to the original. 
+
+We will gladly answer any questions regarding the software. If a
+modification is done, however, it is the responsibility of the person
+who modified the routine to provide support. 
diff --git a/abs/extra/blas/Makefile.blas b/abs/extra/blas/Makefile.blas
new file mode 100644
index 0000000..0c6cd06
--- /dev/null
+++ b/abs/extra/blas/Makefile.blas
@@ -0,0 +1,149 @@
+include ../../make.inc
+
+#######################################################################
+#  This is the makefile to create a library for the BLAS.
+#  The files are grouped as follows:
+#
+#       SBLAS1 -- Single precision real BLAS routines
+#       CBLAS1 -- Single precision complex BLAS routines
+#       DBLAS1 -- Double precision real BLAS routines
+#       ZBLAS1 -- Double precision complex BLAS routines
+#
+#       CB1AUX -- Real BLAS routines called by complex routines
+#       ZB1AUX -- D.P. real BLAS routines called by d.p. complex
+#                 routines
+#
+#      ALLBLAS -- Auxiliary routines for Level 2 and 3 BLAS
+#
+#       SBLAS2 -- Single precision real BLAS2 routines
+#       CBLAS2 -- Single precision complex BLAS2 routines
+#       DBLAS2 -- Double precision real BLAS2 routines
+#       ZBLAS2 -- Double precision complex BLAS2 routines
+#
+#       SBLAS3 -- Single precision real BLAS3 routines
+#       CBLAS3 -- Single precision complex BLAS3 routines
+#       DBLAS3 -- Double precision real BLAS3 routines
+#       ZBLAS3 -- Double precision complex BLAS3 routines
+#
+#  The library can be set up to include routines for any combination
+#  of the four precisions.  To create or add to the library, enter make
+#  followed by one or more of the precisions desired.  Some examples:
+#       make single
+#       make single complex
+#       make single double complex complex16
+#  Note that these commands are not safe for parallel builds.
+#
+#  Alternatively, the commands
+#       make all
+#  or
+#       make
+#  without any arguments creates a library of all four precisions.
+#  The name of the library is held in BLASLIB, which is set in the
+#  top-level make.inc
+#
+#  To remove the object files after the library is created, enter
+#       make clean
+#  To force the source files to be recompiled, enter, for example,
+#       make single FRC=FRC
+#
+#---------------------------------------------------------------------
+#
+#  Edward Anderson, University of Tennessee
+#  March 26, 1990
+#  Susan Ostrouchov, Last updated September 30, 1994
+#  ejr, May 2006.
+#
+#######################################################################
+
+all: $(BLASLIB)
+ 
+#---------------------------------------------------------
+#  Comment out the next 6 definitions if you already have
+#  the Level 1 BLAS.
+#---------------------------------------------------------
+SBLAS1 = isamax.o sasum.o saxpy.o scopy.o sdot.o snrm2.o \
+	srot.o srotg.o sscal.o sswap.o sdsdot.o srotmg.o srotm.o
+$(SBLAS1): $(FRC)
+
+CBLAS1 = scabs1.o scasum.o scnrm2.o icamax.o caxpy.o ccopy.o \
+	cdotc.o cdotu.o csscal.o crotg.o cscal.o cswap.o csrot.o
+$(CBLAS1): $(FRC)
+
+DBLAS1 = idamax.o dasum.o daxpy.o dcopy.o ddot.o dnrm2.o \
+	drot.o drotg.o dscal.o dsdot.o dswap.o drotmg.o drotm.o
+$(DBLAS1): $(FRC)
+
+ZBLAS1 = dcabs1.o dzasum.o dznrm2.o izamax.o zaxpy.o zcopy.o \
+	zdotc.o zdotu.o zdscal.o zrotg.o zscal.o zswap.o zdrot.o
+$(ZBLAS1): $(FRC)
+
+CB1AUX = isamax.o sasum.o saxpy.o scopy.o snrm2.o sscal.o
+$(CB1AUX): $(FRC)
+
+ZB1AUX = idamax.o dasum.o daxpy.o dcopy.o dnrm2.o dscal.o
+$(ZB1AUX): $(FRC)
+
+#---------------------------------------------------------------------
+#  The following line defines auxiliary routines needed by both the
+#  Level 2 and Level 3 BLAS.  Comment it out only if you already have
+#  both the Level 2 and 3 BLAS.
+#---------------------------------------------------------------------
+ALLBLAS  = lsame.o xerbla.o xerbla_array.o
+$(ALLBLAS) : $(FRC)
+
+#---------------------------------------------------------
+#  Comment out the next 4 definitions if you already have
+#  the Level 2 BLAS.
+#---------------------------------------------------------
+SBLAS2 = sgemv.o sgbmv.o ssymv.o ssbmv.o sspmv.o \
+	strmv.o stbmv.o stpmv.o strsv.o stbsv.o stpsv.o \
+	sger.o ssyr.o sspr.o ssyr2.o sspr2.o
+$(SBLAS2): $(FRC)
+
+CBLAS2 = cgemv.o cgbmv.o chemv.o chbmv.o chpmv.o \
+	ctrmv.o ctbmv.o ctpmv.o ctrsv.o ctbsv.o ctpsv.o \
+	cgerc.o cgeru.o cher.o chpr.o cher2.o chpr2.o
+$(CBLAS2): $(FRC)
+
+DBLAS2 = dgemv.o dgbmv.o dsymv.o dsbmv.o dspmv.o \
+	dtrmv.o dtbmv.o dtpmv.o dtrsv.o dtbsv.o dtpsv.o \
+	dger.o dsyr.o dspr.o dsyr2.o dspr2.o
+$(DBLAS2): $(FRC)
+
+ZBLAS2 = zgemv.o zgbmv.o zhemv.o zhbmv.o zhpmv.o \
+	ztrmv.o ztbmv.o ztpmv.o ztrsv.o ztbsv.o ztpsv.o \
+	zgerc.o zgeru.o zher.o zhpr.o zher2.o zhpr2.o
+$(ZBLAS2): $(FRC)
+
+#---------------------------------------------------------
+#  Comment out the next 4 definitions if you already have
+#  the Level 3 BLAS.
+#---------------------------------------------------------
+SBLAS3 = sgemm.o ssymm.o ssyrk.o ssyr2k.o strmm.o strsm.o 
+$(SBLAS3): $(FRC)
+
+CBLAS3 = cgemm.o csymm.o csyrk.o csyr2k.o ctrmm.o ctrsm.o \
+	chemm.o cherk.o cher2k.o
+$(CBLAS3): $(FRC)
+
+DBLAS3 = dgemm.o dsymm.o dsyrk.o dsyr2k.o dtrmm.o dtrsm.o
+$(DBLAS3): $(FRC)
+
+ZBLAS3 = zgemm.o zsymm.o zsyrk.o zsyr2k.o ztrmm.o ztrsm.o \
+	zhemm.o zherk.o zher2k.o
+$(ZBLAS3): $(FRC)
+
+ALLOBJ=$(SBLAS1) $(SBLAS2) $(SBLAS3) $(DBLAS1) $(DBLAS2) $(DBLAS3)	\
+	$(CBLAS1) $(CBLAS2) $(CBLAS3) $(ZBLAS1) \
+	$(ZBLAS2) $(ZBLAS3) $(ALLBLAS)
+
+clean:
+	rm -f *.o libblas.a libblas.so*
+
+static: $(ALLOBJ)
+	ar ruv libblas.a $(ALLOBJ)
+	ranlib libblas.a
+
+shared: $(ALLOBJ)
+	cc $(CFLAGS) -shared -Wl,-soname,libblas.so.3 -o libblas.so.3.4.0 $(ALLOBJ) -lm -lgfortran -lc
+
diff --git a/abs/extra/blas/PKGBUILD b/abs/extra/blas/PKGBUILD
new file mode 100755
index 0000000..94dd1c4
--- /dev/null
+++ b/abs/extra/blas/PKGBUILD
@@ -0,0 +1,52 @@
+# $Id: PKGBUILD 130989 2011-07-09 12:22:58Z ronald $
+# Maintainer: Ronald van Haren <ronald.archlinux.org>
+# Contributor: Jan de Groot <jgc@archlinux.org>
+# Contributor: damir <damir@archlinux.org>
+# Contributor: Jason Taylor <jftaylor21@gmail.com>
+
+pkgname=blas
+pkgver=3.4.0
+pkgrel=1
+url="http://www.netlib.org/blas"
+makedepends=('gcc-fortran')
+depends=('gcc-libs')
+pkgdesc="Basic Linear Algebra Subprograms"
+arch=('i686' 'x86_64')
+license=("custom")
+source=(http://www.netlib.org/lapack/lapack-${pkgver}.tgz
+        Makefile.blas
+        LICENSE.blas)
+sha1sums=('910109a931524f8dcc2734ce23fe927b00ca199f'
+          '85996f56c13991fc69481c0e88ef905a0dcefb49'
+          '2491a151a37f0162b25fc4e4e9a8ac444b574a76')
+	
+build() {
+  cd "${srcdir}/lapack-${pkgver}"
+  cp -f "${srcdir}/Makefile.blas" BLAS/SRC/Makefile 
+  cp -f INSTALL/make.inc.gfortran make.inc
+
+  export FC=gfortran
+
+  pushd BLAS/SRC
+  make clean
+  FFLAGS="${CFLAGS/-O?/-O0}" make dcabs1.o
+  FFLAGS="${CFLAGS} -fPIC" CFLAGS="${CFLAGS} -fPIC" make shared
+  cp libblas.so.${pkgver} "${srcdir}/lapack-${pkgver}/"
+
+  popd
+  ln -s libblas.so.${pkgver} libblas.so
+
+}
+
+package_blas() {
+  install -m755 -d "${pkgdir}/usr/lib"
+  install -m755 "${srcdir}/lapack-${pkgver}/libblas.so.${pkgver}" \
+    "${pkgdir}/usr/lib/"
+  ln -sf libblas.so.${pkgver} "${pkgdir}/usr/lib/libblas.so"
+  ln -sf libblas.so.${pkgver} "${pkgdir}/usr/lib/libblas.so.3"
+  
+  install -m755 -d "${pkgdir}/usr/share/licenses/blas"
+  install -m644 "${srcdir}/LICENSE.blas" \
+    "${pkgdir}/usr/share/licenses/blas/LICENSE"
+}
+
diff --git a/abs/extra/blas/lapack-3.1.1-make.inc.patch b/abs/extra/blas/lapack-3.1.1-make.inc.patch
new file mode 100644
index 0000000..c807ccb
--- /dev/null
+++ b/abs/extra/blas/lapack-3.1.1-make.inc.patch
@@ -0,0 +1,23 @@
+--- lapack-3.1.1/INSTALL/make.inc.gfortran.BAD	2007-05-25 15:34:55.000000000 -0500
++++ lapack-3.1.1/INSTALL/make.inc.gfortran	2007-05-25 15:35:51.000000000 -0500
+@@ -8,7 +8,7 @@ SHELL = /bin/sh
+ #
+ #  The machine (platform) identifier to append to the library names
+ #
+-PLAT = _LINUX
++PLAT = 
+ #  
+ #  Modify the FORTRAN and OPTS definitions to refer to the
+ #  compiler and desired compiler options for your machine.  NOOPT
+@@ -17,9 +17,9 @@ PLAT = _LINUX
+ #  desired load options for your machine.
+ #
+ FORTRAN  = gfortran 
+-OPTS     = -O2
++#OPTS     = -O2
+ DRVOPTS  = $(OPTS)
+-NOOPT    = -O0
++NOOPT    = 
+ LOADER   = gfortran
+ LOADOPTS =
+ #