Merge branch 'testing'

# By James Meyer (1091) and others
# Via James Meyer (5) and others
* testing: (1148 commits)
  LinHES-config: during install don't kill off lirc.  This keeps the remote active all the way to the finish
  Change version numbers to 8.0  to match the release number. LinHES-conifg LinHES-system mythdb-initial runit-scripts supplemental-web
  LinHES-conifig: mv_install.py  for the last partition don't go all the way to the end.  Gotta leave room for gpt tables.
  xf86-video-ati: xorg ati driver.
  LinHES-config: timezip.py  add syncing up of parental lvl passwords and starting level with MBE.
  LinHES-system: correct the logic for breaking out of the wmctrl loop.   As written it would break out of the inner loop..but not the 60 iteration loop.
  e16_theme_settings:  remove slide-in prop for new windows.   For whatever reason this was preventing mplayer from being positioned correctly for appletrailers.
  LinHES-config, mythinstall:  change  case of hd_pvr and   serial to all lower refs #902
  zilog-firmware:   firmware for TX support of the hdpvr and pvr-150 In general I can't recommend anybody using these transmitters  but including the firmware just in case someone really wants to
  linhes-udev-rules:  added hdprv_lirc rule. All of these lirc rules are limited to exactly one device.  If more then one device is present then only the last device in init will get the symlink
  runit-scripts:  fix logging for igdeamon,   add support to remote init script so that the blaster is always the first device in the chain. added support specificly for hd_pvr
  LinHES-system:   add lh_system_restore and lh_system_backup.  These scripts are called from the mythmenu. refs #900
  iguanair: rebuild with python 2.7
  LinHES-system: msg_daemon.py fix  init and nasty bug related to timeout. In a nutshell timeout wouldn't work unless a msg without a timeout was called first.
  linhes-udev-rules:  add rules for mce,streamzap,serial  lirc devices.
  mythinstall: recompile for matching libs
  mythtv:  latest .25-fixes  and change mythbackup/restore call lh_system_$op   to replace mythbackup/mythrestore.  mythbackup no longer works correctly with the new windowmanager
  linhes-scripts: myth2mp3, myth2x264, myth2xvid: use mythutil to get cutlist
  LinHES-config, supplimental-web:  Fix proxy numbering for Ceton infiniTV
  linhes-system:  add additional stuff to the system backup and also introduced an exclude file. The exclude/include files are locate in /home/mythtv/backup_config/
  ...

5 files changed, 580 insertions, 11 deletions

diff --git a/abs/extra/syslinux/PKGBUILD b/abs/extra/syslinux/PKGBUILD
index e2c9eb8..f8bcb92 100644
--- a/abs/extra/syslinux/PKGBUILD
+++ b/abs/extra/syslinux/PKGBUILD
@@ -1,22 +1,30 @@
-# $Id: PKGBUILD 97504 2010-10-30 20:11:46Z tpowa $
+# $Id: PKGBUILD 155387 2012-04-03 08:18:06Z thomas $
 # Maintainer: Thomas Bächler <thomas@archlinux.org>
 # Maintainer: Tobias Powalowski <tpowa@archlinux.org>
 
 pkgname=syslinux
-pkgver=4.03
-pkgrel=1
+pkgver=4.05
+pkgrel=4
 arch=('i686' 'x86_64')
-pkgdesc="Collection of flexible boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE"
+pkgdesc="Collection of boot loaders that boot from FAT, ext2/3/4 and btrfs filesystems, from CDs and via PXE"
 url="http://syslinux.zytor.com/"
 license=('GPL2')
 depends=('perl' 'glibc')
 optdepends=('perl-passwd-md5:  For md5pass'
             'perl-digest-sha1: For sha1pass'
-            'mtools:           For mkdiskimage and syslinux'
+            'mtools:           For mkdiskimage and syslinux support'
            )
 makedepends=('nasm')
+backup=('boot/syslinux/syslinux.cfg')
+install=syslinux.install
 source=(http://www.kernel.org/pub/linux/utils/boot/syslinux/$pkgname-${pkgver}.tar.bz2
-        syslinux-dont-build-dos-windows-targets.patch)
+        syslinux-dont-build-dos-windows-targets.patch
+        syslinux.cfg
+        syslinux-install_update)
+md5sums=('82299242418385da1274c9479a778cb2'
+         '1528c376e43f0eaccaa80d8ad1bc13b4'
+         '832595501944fbcabcdc1207f4724fe7'
+         '680750f73dc2e587ac567d057d485813')
 
 build() {
   # Do not try to build syslinux with our default LDFLAGS, it will fail
@@ -25,13 +33,19 @@ build() {
   # Do not try to build the Windows or DOS installers
   patch -p1 -i "$srcdir"/syslinux-dont-build-dos-windows-targets.patch
   # Fix FHS manpage path
-  sed 's|/usr/man|/usr/share/man|g' -i MCONFIG
+  sed 's|/usr/man|/usr/share/man|g' -i mk/syslinux.mk
   make
 }
 
 package() {
   cd "$srcdir"/$pkgname-${pkgver}
   make INSTALLROOT="$pkgdir" AUXDIR=/usr/lib/syslinux install
+
+  # Install the default configuration
+  install -D -m644 "$srcdir"/syslinux.cfg "$pkgdir"/boot/syslinux/syslinux.cfg
+  # Install the installation and update script
+  # This script is maintained at git://gist.github.com/772138.git
+  install -D -m755 "$srcdir"/syslinux-install_update "$pkgdir"/usr/sbin/syslinux-install_update
+  # move extlinux binary to /usr/sbin
+  mv "$pkgdir"/sbin/extlinux "$pkgdir"/usr/sbin/extlinux
 }
-md5sums=('a7ca38a0a5786b6efae8fb01a1ae8070'
-         '895722a392f3d798a7cc24bc154656f0')
diff --git a/abs/extra/syslinux/syslinux-dont-build-dos-windows-targets.patch b/abs/extra/syslinux/syslinux-dont-build-dos-windows-targets.patch
index 2bac551..2b86ab8 100644
--- a/abs/extra/syslinux/syslinux-dont-build-dos-windows-targets.patch
+++ b/abs/extra/syslinux/syslinux-dont-build-dos-windows-targets.patch
@@ -1,11 +1,11 @@
 diff -Nur syslinux-4.02.orig//Makefile syslinux-4.02//Makefile
 --- syslinux-4.02.orig//Makefile	2010-07-21 21:33:13.000000000 +0200
 +++ syslinux-4.02//Makefile	2010-07-22 11:14:03.325522937 +0200
-@@ -55,7 +55,7 @@
+@@ -54,7 +54,7 @@
  # files that depend only on the B phase, but may have to be regenerated
  # for "make installer".
  BSUBDIRS = codepage com32 lzo core memdisk modules mbr memdump gpxe sample \
--	   libinstaller dos win32 win64 dosutil
+-	   diag libinstaller dos win32 win64 dosutil
 +	   libinstaller
  ITARGET  =
  IOBJECTS = $(ITARGET) \
diff --git a/abs/extra/syslinux/syslinux-install_update b/abs/extra/syslinux/syslinux-install_update
new file mode 100644
index 0000000..cd1baa5
--- /dev/null
+++ b/abs/extra/syslinux/syslinux-install_update
@@ -0,0 +1,463 @@
+#!/bin/bash
+#
+# Sylinux Installer / Updater Scripts
+# Copyright (C) 2011  Matthew Gyurgyik <pyther@pyther.net>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+#
+#-----------------
+# Exit Codes:
+#   1 - get_boot_device or other function failed
+#   2 - install/update failed
+#   3 - set_active failed
+#   4 - install_mbr failed
+#
+shopt -s nullglob
+
+libpath="/usr/lib/syslinux"
+bootpath="/boot/syslinux"
+extlinux="/usr/sbin/extlinux"
+
+autoupdate_file=/boot/syslinux/SYSLINUX_AUTOUPDATE
+com32_files=(menu.c32 vesamenu.c32 chain.c32 hdt.c32 reboot.c32 poweroff.com)
+pciids_file=/usr/share/hwdata/pci.ids
+
+## Helper functions ##
+# Taken from libui-sh
+# $1 needle
+# $2 set (array) haystack
+check_is_in() {
+    local needle="$1" element
+    shift
+    for element; do
+        [[ $element = $needle ]] && return 0
+    done
+    return 1
+}
+
+# return true when blockdevice is an md raid, otherwise return a unset value
+# get all devices that are part of raid device $1
+device_is_raid() {
+    [[ $1 && -f /proc/mdstat ]] || return 1
+    local devmajor=$(stat -c %t "$1")
+    (( devmajor == 9 ))
+}
+
+mdraid_all_slaves() {
+    local slave slaves
+    for slave in /sys/class/block/${1##*/}/slaves/*; do
+        source "$slave/uevent"
+        slaves="$slaves/dev/$DEVNAME "
+        unset DEVNAME
+    done
+    echo $slaves
+}
+
+# Check /sys/block to see if device is partitioned
+# If we have a partitioned block device (sda1) /sys/block/sda1/dev will not exist
+# However, if we have an unpartitioned block device (sda) /sys/block/sda/dev will exist
+dev_is_part() {
+    # $1 - blockdevice
+    local dev=$1
+
+    # If block device uevent file should be found
+    # If a partition is passed in path shouldn't exist
+    if [[ $dev = *cciss* ]]; then
+        [[ -f /sys/block/cciss\!${dev##*/}/dev ]] && return 1
+    elif [[ $dev = *ida* ]]; then
+        [[ -f /sys/block/ida\!${dev##*/}/dev ]] && return 1
+    else
+        [[ -f /sys/block/${dev##*/}/dev ]] && return 1
+    fi
+
+    return 0
+}
+
+# If EFI PART is present in the first 8 bytes then it must be a GPT disk
+device_is_gpt() {
+    local partsig=$(dd if="$1" skip=64 bs=8 count=1 2>/dev/null)
+    [[ $partsig = "EFI PART" ]]
+}
+
+clear_gpt_attr2() {
+    # $1 - Block Device, no partitions
+    local disk=$1
+
+    # Special Exception for cciss controllers
+    if [[ $disk = *cciss* ]]; then
+        for part in /dev/cciss/${disk##*/}*p*; do
+            local partnum="${part##*[[:alpha:]]}"
+            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
+        done
+    # Smart 2 Controllers
+    elif [[ $disk = *ida* ]]; then
+        for part in /dev/ida/${disk##*/}*p*; do
+            local partnum="${part##*[[:alpha:]]}"
+            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
+        done
+    else
+        for part in  /sys/block/${disk##*/}/${disk##*/}*; do
+            local partnum="${part##*[[:alpha:]]}"
+            sgdisk "$disk" --attributes="$partnum":clear:2 &>/dev/null
+        done
+    fi
+    return 0
+}
+
+usage() {
+cat << EOF
+usage: $0 options
+
+This script will install or upgrade Syslinux
+
+OPTIONS:
+  -h    Show this message
+  -i    Install Syslinux
+  -u    Update Syslinux
+  -a    Set Boot flag on boot partiton
+  -m    Install Syslinux MBR
+  -s    Updates Syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
+
+ Arguments Required:
+  -c    Chroot install (ex: -c /mnt)
+
+Example Usage: syslinux-install_update.sh -i -a -m (install, set boot flag, install mbr)
+               syslinux-install_update.sh -u (update)
+EOF
+}
+
+# Trys to find the partition that /boot resides on
+# This will either be on /boot or / (root)
+getBoot() {
+    if [[ ! -d "$bootpath" ]]; then
+        echo "Could not find $bootpath"
+        echo "Is boot mounted? Is Syslinux installed?"
+        exit 1
+    fi
+
+    syslinux_fs=(ext2 ext3 ext4 btrfs vfat)
+
+    # Use DATA from findmnt see rc.sysint for more info
+    if [[ -f /proc/self/mountinfo ]]; then
+        read rootdev rootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/")
+        read bootdev bootfs < <(findmnt -run -t noautofs -o SOURCE,FSTYPE "$CHROOT/boot")
+    else
+        echo "Could not find /proc/self/mountinfo"
+        echo "Are you running a kernel greater than 2.6.24?"
+        exit 1
+    fi
+
+    if [[ $bootfs ]]; then
+        if ! check_is_in "$bootfs" "${syslinux_fs[@]}"; then
+            echo "/boot file system is not supported by Syslinux"
+            exit 1
+        fi
+        boot="boot"
+        bootpart="$bootdev"
+    elif [[ $rootfs ]]; then
+        if ! check_is_in "$rootfs" "${syslinux_fs[@]}"; then
+            echo "/ (root) file system is not supported by Syslinux"
+            exit 1
+        fi
+        boot="root"
+        bootpart="$rootdev"
+    else
+        echo "Could not find filesystem on / (root) or /boot."
+        exit 1
+    fi
+}
+
+# We store the partition table type either gpt or mbr in var ptb
+# In rare cases a user could have one raid disk using mbr and another using gpt
+# In such cases we accept that the output may be incomplete
+
+# Calls get_ptb() for $bootpart or for all device in RAID
+declare -A bootdevs
+get_boot_devices() {
+    if device_is_raid "$bootpart"; then
+        slaves=$(mdraid_all_slaves "$bootpart")
+
+        for slave in ${slaves[@]}; do
+            local disk="${slave%%[[:digit:]]*}"
+            device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
+            bootdevs[$slave]="$ptb"
+        done
+    else
+        local disk="${bootpart%%[[:digit:]]*}"
+        device_is_gpt "$disk" && local ptb="GPT" || local ptb="MBR"
+        bootdevs[$bootpart]="$ptb"
+    fi
+}
+
+# Function Assumes the boot partition should be marked as active
+# All other partitions should not have the boot flag set
+set_active() {
+    # If any bootdev is a block device without partitions bail
+    # we want to set the boot flag on partitioned disk
+    for dev in "${!bootdevs[@]}"; do
+        dev_is_part $dev || { echo "$dev - is a block device. Aborting set_active!"; return 1; }
+    done
+
+    # Clear BIOS Bootable Legacy Attribute for GPT drives
+    # In rare cases where a RAID device has slaves on the same block device
+    # Attribute 2 will be cleared for each partition multiple times
+    for dev in "${!bootdevs[@]}"; do
+        local ptb="${bootdevs[$dev]}"
+        if [[ "$ptb" = GPT ]]; then
+            local disk="${dev%%[[:digit:]]*}" #ex: /dev/sda
+            clear_gpt_attr2 "$disk"
+        fi
+    done
+
+    # Set the boot flag on bootdevs (generated from get_boot_devices)
+    for part in "${!bootdevs[@]}"; do
+        local ptb="${bootdevs[$part]}"
+        local partnum="${part##*[[:alpha:]]}"
+        case "$part" in
+            *[[:digit:]]p[[:digit:]]*)
+                local disk="${part%%p$partnum}" # get everything before p1
+                ;;
+            *)
+                local disk="${part%%[[:digit:]]*}"
+                ;;
+        esac
+
+        if [[ "$ptb" = MBR ]]; then
+            if sfdisk "$disk" -A "$partnum" &>/dev/null; then
+                echo "Boot Flag Set - $part"
+            else
+                echo "FAILED to Set the boot flag on $part"
+                exit 3
+            fi
+        elif [[ "$ptb" = GPT ]]; then
+            if sgdisk "$disk" --attributes="$partnum":set:2 &>/dev/null; then
+                echo "Attribute Legacy Bios Bootable Set - $part"
+            else
+                echo "FAILED to set attribute Legacy BIOS Bootable on $part"
+                exit 3
+            fi
+        fi
+    done
+    return 0
+}
+
+install_mbr() {
+    # If any bootdev is a block device without partitions bail
+    # we want to install the mbr to a partitioned disk
+    for dev in "${!bootdevs[@]}"; do
+        dev_is_part "$dev" || { echo "$dev - is a block device. Aborting MBR install"; return 1; }
+    done
+
+    for part in "${!bootdevs[@]}"; do
+        local partnum="${part##*[[:alpha:]]}"
+        case "$part" in
+            *[[:digit:]]p[[:digit:]]*)
+                local disk="${part%%p$partnum}" # get everything before p1
+                ;;
+            *)
+                local disk="${part%%[[:digit:]]*}"
+                ;;
+        esac
+        local ptb="${bootdevs[$part]}"
+
+        # We want to install to the root of the block device
+        # If the device is a partition - ABORT!
+        dev_is_part "$disk" && \
+        { echo "ABORT! MBR installation to partition ($disk)!"; exit 4;}
+
+        if [[ "$ptb" = MBR ]]; then
+            mbrfile="$libpath/mbr.bin"
+        elif [[ "$ptb" = GPT ]]; then
+            mbrfile="$libpath/gptmbr.bin"
+        fi
+
+        if dd bs=440 count=1 conv=notrunc if="$mbrfile" of="$disk" &> /dev/null; then
+            echo "Installed MBR ($mbrfile) to $disk"
+        else
+            echo "Error Installing MBR ($mbrfile) to $disk"
+            exit 4
+        fi
+    done
+    return 0
+}
+
+_install() {
+    # Copy files to /boot
+    for file in "${com32_files[@]}"; do
+        # Symlink files even if links exist
+        if [[ "$boot" = root ]]; then
+            ln -s "${libpath#$CHROOT}/$file" "$bootpath/$file" &> /dev/null
+        elif [[ "$boot" = boot ]]; then
+            cp "$libpath/$file" "$bootpath/$file"
+        fi
+    done
+
+    # Copy / Symlink pci.ids if we copy the com32 module and if pci.ids exists in the FS
+    if check_is_in "hdt.c32" "${com32_files[@]}" && [[ -f $pciids_file ]]; then 
+        if [[ "$boot" = root ]]; then
+            ln -s "$pciids_file" "$bootpath/pci.ids" &> /dev/null
+        elif [[ "$boot" = boot ]]; then
+            cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null
+        fi
+    fi
+
+    if device_is_raid "$bootpart"; then
+        echo "Detected RAID on /boot - installing Syslinux with --raid"
+        "$extlinux" --install "$bootpath" -r > /dev/null 2>&1
+    else
+        "$extlinux" --install "$bootpath" > /dev/null 2>&1
+    fi
+
+    if (( $? )); then
+        echo "Syslinux install failed"
+        exit 2
+    else
+        echo "Syslinux install successful"
+    fi
+
+    touch "$CHROOT/$autoupdate_file"
+}
+
+update() {
+    # Update any com and c32 files in /boot
+    if [[ "$boot" = boot ]]; then
+        for file in "$bootpath"/*.{c32,com}; do
+            file=$(basename "$file")
+            cp "$libpath/$file" "$bootpath/$file" &> /dev/null
+        done
+        if [[ -f "$bootpath/pci.ids" ]]; then
+            cp "$pciids_file" "$bootpath/pci.ids" &> /dev/null
+        fi
+    fi
+
+    if device_is_raid $bootpart; then
+        echo "Detected RAID on /boot - installing Syslinux with --raid"
+        "$extlinux" --update "$bootpath" -r &> /dev/null
+    else
+        "$extlinux" --update "$bootpath" &> /dev/null
+    fi
+
+    if (($?)); then
+        echo "Syslinux update failed"
+        exit 2
+    else
+        echo "Syslinux update successful"
+    fi
+}
+
+if (( $# == 0 )); then
+    usage
+    exit 1
+fi
+
+while getopts "c:uihmas" opt; do
+    case $opt in
+        c)
+            CHROOT=$(readlink -e "$OPTARG")
+            if [[ -z $CHROOT ]]; then
+                echo "error: chroot path ``$OPTARG does not exist";
+                exit 1
+            fi
+            ;;
+        h)
+            USAGE="True"
+            ;;
+        i)
+            INSTALL="True"
+            ;;
+        u)
+            UPDATE="True"
+            ;;
+        m)
+            MBR="True"
+            ;;
+        a)
+            SET_ACTIVE="True"
+            ;;
+        s)
+            # If AUTOUPDATE_FILE does not exist exit the script
+            if [[ -f $autoupdate_file ]]; then
+                UPDATE="True"
+            else
+                exit 0
+            fi
+            ;;
+        *)
+            usage
+            exit 1
+            ;;
+    esac
+done
+
+if [[ $USAGE ]]; then
+    usage
+    exit 0
+fi
+
+# Make sure only root can run our script
+if (( $(id -u) != 0 )); then
+    echo "This script must be run as root" 1>&2
+    exit 1
+fi
+
+# Display Usage Information if both Install and Update are passed
+if [[ $INSTALL && $UPDATE ]]; then
+    usage
+    exit 1
+fi
+
+# If a chroot dir is path set variables to reflect chroot
+if [[ "$CHROOT" ]]; then
+    libpath="$CHROOT$libpath"
+    bootpath="$CHROOT$bootpath"
+    extlinux="$CHROOT$extlinux"
+fi
+
+# Exit if no /boot path exists
+if ( f=("$bootpath"/*); (( ! ${#f[@]} )) ); then
+    echo "Error: $bootpath is empty!"
+    echo "Is /boot mounted?"
+    exit 1
+fi
+
+# Get the boot device if any of these options are passed
+if [[ $INSTALL || $UPDATE || $SET_ACTIVE || $MBR ]]; then
+    getBoot
+fi
+
+# Install or Update
+if [[ $INSTALL ]]; then
+    _install || exit
+elif [[ $UPDATE ]]; then
+    update || exit
+fi
+
+
+# SET_ACTIVE and MBR
+if [[ $SET_ACTIVE ]] || [[ $MBR ]]; then
+    get_boot_devices
+
+    if [[ $SET_ACTIVE ]]; then
+        set_active || exit
+    fi
+
+    if [[ $MBR ]]; then
+        install_mbr || exit
+    fi
+fi
+
+exit 0
+
+# vim: set et sw=4:
diff --git a/abs/extra/syslinux/syslinux.cfg b/abs/extra/syslinux/syslinux.cfg
new file mode 100644
index 0000000..5a588f5
--- /dev/null
+++ b/abs/extra/syslinux/syslinux.cfg
@@ -0,0 +1,79 @@
+# Config file for Syslinux -
+# /boot/syslinux/syslinux.cfg
+#
+# Comboot modules:
+#   * menu.c32 - provides a text menu
+#   * vesamenu.c32 - provides a graphical menu
+#   * chain.c32 - chainload MBRs, partition boot sectors, Windows bootloaders
+#   * hdt.c32 - hardware detection tool
+#   * reboot.c32 - reboots the system
+#   * poweroff.com - shutdown the system
+#
+# To Use: Copy the respective files from /usr/lib/syslinux to /boot/syslinux.
+# If /usr and /boot are on the same file system, symlink the files instead
+# of copying them.
+#
+# If you do not use a menu, a 'boot:' prompt will be shown and the system
+# will boot automatically after 5 seconds.
+#
+# Please review the wiki: https://wiki.archlinux.org/index.php/Syslinux
+# The wiki provides further configuration examples
+
+DEFAULT arch
+PROMPT 0        # Set to 1 if you always want to display the boot: prompt 
+TIMEOUT 50
+# You can create syslinux keymaps with the keytab-lilo tool
+#KBDMAP de.ktl
+
+# Menu Configuration
+# Either menu.c32 or vesamenu32.c32 must be copied to /boot/syslinux 
+UI menu.c32
+#UI vesamenu.c32
+
+# Refer to http://syslinux.zytor.com/wiki/index.php/Doc/menu
+MENU TITLE Arch Linux
+#MENU BACKGROUND splash.png
+MENU COLOR border       30;44   #40ffffff #a0000000 std
+MENU COLOR title        1;36;44 #9033ccff #a0000000 std
+MENU COLOR sel          7;37;40 #e0ffffff #20ffffff all
+MENU COLOR unsel        37;44   #50ffffff #a0000000 std
+MENU COLOR help         37;40   #c0ffffff #a0000000 std
+MENU COLOR timeout_msg  37;40   #80ffffff #00000000 std
+MENU COLOR timeout      1;37;40 #c0ffffff #00000000 std
+MENU COLOR msg07        37;40   #90ffffff #a0000000 std
+MENU COLOR tabmsg       31;40   #30ffffff #00000000 std
+
+# boot sections follow
+#
+# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
+#
+#-*
+
+LABEL arch
+	MENU LABEL Arch Linux
+	LINUX ../vmlinuz-linux
+	APPEND root=/dev/sda3 ro
+	INITRD ../initramfs-linux.img
+
+LABEL archfallback
+	MENU LABEL Arch Linux Fallback
+	LINUX ../vmlinuz-linux
+	APPEND root=/dev/sda3 ro
+	INITRD ../initramfs-linux-fallback.img
+
+#LABEL windows
+#        MENU LABEL Windows
+#        COM32 chain.c32
+#        APPEND hd0 1
+
+LABEL hdt
+        MENU LABEL HDT (Hardware Detection Tool)
+        COM32 hdt.c32
+ 
+LABEL reboot
+        MENU LABEL Reboot
+        COM32 reboot.c32
+ 
+LABEL off
+        MENU LABEL Power Off
+        COMBOOT poweroff.com
diff --git a/abs/extra/syslinux/syslinux.install b/abs/extra/syslinux/syslinux.install
new file mode 100644
index 0000000..0dc0ece
--- /dev/null
+++ b/abs/extra/syslinux/syslinux.install
@@ -0,0 +1,13 @@
+post_install() {
+  echo "==> If you want to use syslinux as your bootloader"
+  echo "==> edit /boot/syslinux/syslinux.cfg and run"
+  echo "==>   # /usr/sbin/syslinux-install_update -i -a -m"
+  echo "==> to install it."
+}
+
+post_upgrade() {
+  # auto-update syslinux if /boot/syslinux/SYSLINUX_AUTOUPDATE exists
+  /usr/sbin/syslinux-install_update -s
+}
+
+# vim:set ts=2 sw=2 et: